Skip to main content

Full text of "Astronomical Almanac 1992"

See other formats


EXPLANATORY  SUPPLEMENT 
TO  THE  ASTRONOMICAL  ALMANAC 


A  Revision  to  the 

EXPLANATORY  SUPPLEMENT  TO  THE  ASTRONOMICAL  EPHEMERIS 

and 

THE  AMERICAN  EPHEMERIS  AND  NAUTICAL  ALMANAC 
Prepared  by 

THE  NAUTICAL  ALMANAC  OFFICE,  U.S.  NAVAL  OBSERVATORY 
WITH  CONTRIBUTIONS  FROM 
H.M.  NAUTICAL  ALMANAC  OFFICE,  ROYAL  GREENWICH  OBSERVATORY, 
JET  PROPULSION  LABORATORY, 
BUREAU  DES  LONGITUDES, 
and 

THE  TIME  SERVICE  AND  ASTROMETRY  DEPARTMENTS,  U.S.  NAVAL  OBSERVATORY 


Edited  by 
P.  Kenneth  Seidelmann 


UNIVERSITY  SCIENCE  BOOKS 
Mill  Valley,  California 


University  Science  Books 
20  Edgehill  Road 
Mill  Valley,  CA  94941 
Fax:  (415)383-3167 


Production  manager:  Mary  Miller 
Copy  editor:  Aidan  Kelly  and  Margy  Kuntz 
Text  and  jacket  designer:  Robert  Ishi 
TgX  formatter  and  illustrator:  Ed  Sznyter 
Proofreader:  Jan  McDearmon 

Printer  and  binder:  The  Maple- Vail  Book  Manufacturing  Group 


Copyright  ©  1992  by  University  Science  Books 
Reproduction  or  translation  of  any  pan  of  this  work  beyond 
that  permitted  by  Section  107  or  108  of  the  1976  United  States 
Copyright  Act  without  the  permission  of  the  copyright  owner 
is  unlawful.  Requests  for  permission  or  further  information 
should  be  addressed  to  the  Permissions  Department, 
University  Science  Books. 

Library  of  Congress  Catalog  Number:  91-65331 
ISBN  0-935702-68-7 


Printed  in  the  United  States  of  America 
10  987654321 


Abbreviated  CONTENTS 


LIST  OF  FIGURES  xvii 
LIST  OF  TABLES  xxi 
FOREWORD  xxv 
PREFACE  xxvii 

1  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  1 

2  TIME  39 

3  CELESTIAL  REFERENCE  SYSTEMS  95 

4  TERRESTRIAL  COORDINATES 

AND  THE  ROTATION  OF  THE  EARTH  199 

5  ORBITAL  EPHEMERIDES 

OF  THE  SUN.  MOON,  AND  PLANETS  279 

6  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  325 

7  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND 
SATELLITES  383 

8  ECLIPSES  OF  THE  SUN  AND  MOON  421 

9  ASTRONOMICAL  PHENOMENA  475 

10  STARS  AND  STELLAR  SYSTEMS  505 

11  COMPUTATIONAL  TECHNIQUES  541 

12  CALENDARS  575 
12.10  REFERENCES  606 

13  HISTORICAL  INFORMATION  609 

14  RELATED  PUBLICATIONS  667 

15  REFERENCE  DATA  693 

GLOSSARY  721 
INDEX  741 


v 


Contents 


LIST  OF  FIGURES  xvri 
LIST  OF  TABLES  xxi 
FOREWORD  xxv 
PREFACE  xxvii 

1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  1 

1.1  INTRODUCTION  1 
1.11    Purpose  1 

1 .2  TIMESCALES  AND  CALENDARS  2 

1.21  Atomic  Timescales  2 

1 .22  Dynamical  Time  3 

1 .23  Rotational  Timescales  3 

1.24  Coordinated  Universal  Time  (UTC)  6 

1.25  The  Enumeration  of  Dates  7 

1.3  CELESTIAL  AND  TERRESTRIAL  COORDINATES  8 

1.31  Coordinate  Systems  and  Frames  8 

1.32  Celestial  Coordinate  Systems  11 

1.33  Terrestrial  Coordinate  Systems  13 

1 .34  The  Rotation  of  the  Earth   1 8 

1 .35  The  Connections  between  Terrestrial  and  Celestial  Coordinates  20 

1 .36  Effects  of  the  Position  and  Motion  of  the  Object  and  Observer  21 

1 .4  ORBITAL  MOTIONS  24 

1 .41  Motion  in  Two-body  Systems  24 

1 .42  Types  of  Perturbations  28 

1 .43  Perturbations  by  and  on  Extended  Bodies  30 

1.5  ASTRONOMICAL  PHENOMENA  32 

1.51  Rising,  Setting,  and  Twilight  32 

1.52  Meridian  Transit  33 

vil 


viii 


CONTENTS 


1.53  Conjunction,  Opposition,  and  Elongation  33 

1 .54  Eclipses,  Occultations,  and  Transits  34 

1.55  Satellite  Phenomena  35 

1 .56  Physical  Observations  of  the  Sun,  Moon,  and  Planets  36 
1.6    REFERENCES  38 

2  /  TIME  39 

2.1  INTRODUCTION  39 

2.2  MEASURES  OF  TIME  AND  THEIR  RELATIONSHIPS  40 

2.21  Atomic  Time  (TAI)  40 

2.22  Dynamical  Time  41 

2.23  Sidereal  Time  48 

2.24  Universal  Time  50 

2.25  The  Ephemeris  Meridian  54 

2.26  Julian  Date  55 

2.27  Time  Zones  56 

2.3  PRACTICAL  DETERMINATIONS  OF  TIME  58 

2.31  Frequency  Standards  and  Clock  Performance  58 

2.32  Measurement  of  Atomic  Time  60 

2.33  Earth  Rotation  Measurement  61 

2.34  Dynamical  Time  Determinations  63 

2.4  METHODS  OF  TIME  TRANSFER  64 

2.41  Radio  Time  Signals  65 

2.42  Portable  Clocks  65 

2.43  LORAN-C  66 

2.44  Television  Comparison  Techniques  67 

2.45  Use  of  Satellites  68 

2.46  Intercontinental  Clock  Synchronization  by  VLBI  69 

2.47  Relativistic  Effects  in  Time  Transfer  70 

2.5  HISTORICAL  DEVELOPMENT  OF  TIMEKEEPING  73 

2.51  Introduction  73 

2.52  Apparent  Solar  Time,  Mean  Solar  Time,  and  the  Equation  of  Time  74 

2.53  Rotation  of  the  Earth  76 

2.54  Universal  Time  77 

2.55  Ephemeris  Time  79 

2.56  History  of  Atomic  Time  84 

2.57  History  of  Coordinated  Universal  Time  85 

2.58  History  of  Transmitted  Time  Signals  86 

2.6  REFERENCES  88 

3  /  CELESTIAL  REFERENCE  SYSTEMS  95 

3.1  CELESTIAL  REFERENCE  SYSTEMS  95 

3.11  Fundamental  Reference  Systems  97 

3.12  The  Dynamical  Reference  System  98 

3.13  The  Conventional  Celestial  Reference  System  98 

3.2  BASIS  OF  REDUCTION  OF  CELESTIAL  COORDINATES  99 
3.21    Precession  99 


CONTENTS 


ix 


3.22  Nutation  109 

3.23  Space  Motion  121 

3.24  Parallax  123 

3.25  Aberration  127 

3.26  Gravitational  light  deflection  135 

3.27  Polar  Motion  139 

3.28  Refraction  140 

3.3  APPARENT  AND  TOPOCENTRIC  PLACE  ALGORITHMS  145 

3.31  Apparent- Place  Algorithm  for  Planets   1 45 

3.32  Apparent-Place  Algorithm  for  Stars   1 52 

3.33  The  Computer  Implementation  of  Apparent-Place  Algorithms   1 54 

3.34  Apparent-Places-Day-Number  Technique  155 

3.35  Topocentric- Place  Algorithm  160 

3.4  DIFFERENTIAL  ASTROMETRY  165 

3.41  Virtual  Place  165 

3.42  Local  Place  165 

3.43  Astrometric  Place    1 66 

3.5  TRANSFORMATION  TO  FK5  SYSTEM  AND  EPOCH  J2000.0    1 67 

3.51  FK4  Zero-Point  Correction  in  Right  Ascension  167 

3.52  The  Correction  to  the  FK4  Proper  Motion  System  in  Right  Ascension  168 

3.53  Elliptic  Terms  in  Aberration  169 

3.54  Precession  173 

3.55  The  Proper-Motion  System  174 

3.56  Equations  for  the  Transformation  of  Catalogs  from  81 950.0  to  J2000.0   1 75 

3.57  Transformation  of  Observational  Catalogs  179 

3.58  Numerical  Examples  180 

3.59  Matrix  Method  180 

3.6  REFERENCES  187 

4  /  TERRESTRIAL  COORDINATES 

AND  THE  ROTATION  OF  THE  EARTH    1 99 

4.1  INTRODUCTION  199 

4.2  TERRESTRIAL  COORDINATE  SYSTEMS  200 

4.21  The  Figure  of  the  Earth  and  the  Reference  Ellipsoid  200 

4.22  Geocentric,  Geodetic,  and  Astronomical  Coordinates  202 

4.23  Local  Coordinate  Systems  207 

4.24  Geodetic  Datums  and  Reference  Systems  216 

4.25  The  Conventional  Terrestrial  Reference  System  223 

4.3  GRAVITY,  THE  TIDES,  AND  MOTIONS  OF  THE  CRUST  224 

4.31  Modeling  the  Earth's  Gravity  Field  224 

4.32  A  Representation  of  the  Earth's  Gravity  Field  227 

4.33  Solid  Earth  Tides  233 

4.34  Ocean  Tide  Model  240 

4.35  Site  Displacement  Due  to  Ocean  and  Atmospheric  Loading  244 

4.36  Plate  Motions  249 

4.37  Tidal  Effects  on  UT1  250 


CONTENTS 


4.4  THE  MONITORING  OF  THE  ROTATION  OF  THE  EARTH  251 

4.41  Laser  Ranging  254 

4.42  Very  Long  Baseline  Interferometry  255 

4.43  Historical  Methods  256 

4.44  Alternative  Techniques  258 

4.45  International  Services  262 

4.5  DETERMINATION  OF  PAST  VARIATIONS  IN  LENGTH  OF  DAY 
AND  THE  POSITION  OF  THE  POLE  265 

4.51  Historical  Variations  in  UT1  and  Length  of  Day  265 

4.52  Historical  Variations  in  Polar  Motion  269 

4.6  REFERENCES  272 

5  /  ORBITAL  EPHEMERIDES 

OF  THE  SUN,  MOON,  AND  PLANETS  279 

5.1  FUNDAMENTAL  EPHEMERIDES  279 

5.11  Gravitational  Model  280 

5.12  The  Ephemeris  Reference  Frame  280 

5.13  The  Astronomical  Constants  Used  in  the  Ephemerides  280 

5.2  COMPUTATION  OF  EPHEMERIDES  281 

5.21  Mathematical  Model  281 

5.22  Numerical  Integration  286 

5.23  Orientation  of  Ephemerides  288 

5.3  OBSERVATIONAL  DATA  FIT  BY  THE  PLANETARY  AND  LUNAR 
EPHEMERIDES  290 

5.31  Optical  Data  290 

5.32  Radar-Ranging  Data  294 

5.33  Spacecraft  Range  Points  297 

5.34  Lunar  Laser  Range  Data  299 

5.4  LEAST-SQUARES  ADJUSTMENT  OF  THE  EPHEMERIDES  300 

5.41  The  Observational  Equations  301 

5.42  The  Solution  Parameters  301 

5.43  The  Standard  Deviations  303 

5.5  NUMERICAL  REPRESENTATION  OF  THE  EPHEMERIDES  303 

5.51  Chebyshev  Polynomials  305 

5.52  Chebyshev  Coefficient  Generation  305 

5.53  Interpolation  Error  and  Polynomial  Degree  306 

5.6  COMPUTATION  OF  OBSERVATIONAL  EPHEMERIDES  307 

5.61  Apparent  Positions  308 

5.62  Astro-metric  Positions  308 

5.63  Transit  Ephemerides  308 

5.7  ORBIT  AND  EPHEMERIDES  OF  OTHER  BODIES 
WITHIN  THE  SOLAR  SYSTEM    31 0 

5.71    Minor  Planets  and  Comets  310 


CONTENTS 


Xi 


5.8  KEPLERIAN  ELEMENTS  FOR  THE  POSITIONS  OF  THE  MAJOR 
PLANETS  315 

5.9  BASIS  FOR  PRE-1984  EPHEMERIDES  317 

5.91    Introduction  of  New  Constants  317 

5.10  REFERENCES  319 

6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  325 

6.1  INTRODUCTION  325 

6.11  Orbital  Elements  325 

6.1 2  Secular  Perturbations  of  the  Orbit  327 

6.13  Perturbations  due  to  Commensurabilities  330 

6.14  Long-Period  Perturbations  by  Other  Satellites  332 

6.15  Planetocentric  Rectangular  Coordinates  333 

6.16  The  Apparent  Orbit  336 

6.17  Calculating  Tabulated  Values  340 

6.18  Notation  342 

6.2  THE  SATELLITES  OF  MARS  342 

6.3  THE  SATELLITES  OF  JUPITER  345 

6.31  The  Galilean  Satellites  345 

6.32  The  Fifth  Satellite,  Amalthea  349 

6.33  The  Fourteenth  Satellite,  Thebe  351 

6.34  The  Sixth  through  Thirteenth  Satellites  352 

6.4  THE  RINGS  AND  SATELLITES  OF  SATURN  354 

6.41  The  Rings  of  Saturn  354 

6.42  The  Satellites  of  Saturn  356 

6.5  THE  RINGS  AND  SATELLITES  OF  URANUS  368 

6.6  THE  SATELLITES  OF  NEPTUNE  373 

6.61  Trilon  373 

6.62  Nereid  375 

6.7  THE  SATELLITE  OF  PLUTO  377 

6.8  REFERENCES  378 

7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS, 

AND  SATELLITES  383 

7.1  INTRODUCTION  383 

7.1 1  Rotational  Elements  and  Cartographic  Coordinates  383 

7.12  Phases  and  Magnitudes  388 

7.2  PHYSICAL  EPHEMERIS  OF  THE  SUN  397 

7.3  PHYSICAL  EPHEMERIS  OF  THE  MOON  398 

7.4  PHYSICAL  EPHEMERIDES  OF  THE  PLANETS  401 

7.41  Mercury  401 

7.42  Venus  402 


xii 


CONTENTS 


7.43  Mars  403 

7.44  Jupiter  403 

7.45  Saturn  404 

7.46  Uranus  405 

7.47  Neptune  405 

7.48  Pluto  406 

7.5  PHYSICAL  EPHEMERIDES  OF  THE  SATELLITES  407 

7.51  Satellites  of  Mars  407 

7.52  Satellites  of  Jupiter  408 

7.53  Satellites  of  Saturn  408 

7.54  Satellites  of  Uranus  411 

7.55  Satellites  of  Neptune  413 

7.56  The  Satellite  of  Pluto  414 

7.6  PHYSICAL  EPHEMERIDES  OF  THE  ASTEROIDS  414 

7.7  REFERENCES  417 

8  /  ECLIPSES  OF  THE  SUN  AND  MOON  421 

8.1  INTRODUCTION  421 

8.11  Eclipse  Data  Available  from  the  Nautical  Almanac  Office  422 

8.12  Corrections  to  the  Ephemerides  424 

8.2  THE  OCCURRENCE  OF  LUNAR  AND  SOLAR  ECLIPSES  426 

8.21  Overview  426 

8.22  Geocentric  Least  Angular  Separation  426 

8.23  Occurrence  of  Lunar  Eclipses  428 

8.24  Occurrence  of  Solar  Eclipses  431 

8.3  SOLAR  ECLIPSES  434 

8.31  Fundamental  Equations:  Introduction  434 

8.32  Besselian  Elements  435 

8.33  Coordinates  of  the  Observer  441 

8.34  Conditional  and  Variational  Equations  446 

8.35  Calculation  of  General  Solar  Eclipse  Phenomena  450 

8.36  Local  Circumstances  461 

8.4  LUNAR  ECLIPSES  467 

8.41  Introduction  467 

8.42  Computations  467 

8.5  TRANSITS  471 

8.6  REFERENCES  472 

9  /  ASTRONOMICAL  PHENOMENA  475 

9.1  GENERAL  ASPECTS  OF  THE  NIGHT  SKY  475 

9.2  CONFIGURATIONS  OF  THE  SUN,  MOON,  AND  PLANETS  476 

9.21  Interesting  Phenomena  of  the  Sun,  Earth,  and  Moon  477 

9.22  Geocentric  Phenomena  478 

9.23  Heliocentric  Phenomena  481 


CONTENTS 


xiii 


9.3  RISINGS,  SETTINGS,  AND  TWILIGHT  482 

9.31  Sunrise,  Sunset,  and  Twilight  483 

9.32  Moonrise  and  Moonset  485 

9.33  Formulas  Associated  with  Rising  and  Setting  486 

9.34  Illumination  490 

9.4  OCCULTATIONS  494 

9.41  Occultations  of  Stars  494 

9.42  Occultations  of  Planets  498 

9.5  POLE-STAR  TABLES  498 

9.51    Derivation  of  the  Pole  Star  Coefficients  501 

9.6  REFERENCES  502 

1 0  /  STARS  AND  STELLAR  SYSTEMS  505 

1 0.1  SOURCES  OF  DATA  ON  STARS  AND  STELLAR  SYSTEMS  505 

10.11  Compiled  Catalogs  of  Stellar  Positions  and  Motions  506 

10.12  Standard  Reference  Catalogs  507 

10.13  Observational  Positional  Catalogs  508 

10.14  Other  Catalogs  and  Lists  509 

10.15  Data  Centers  and  Their  Facilities  509 

10.2  STELLAR  DATA  IN  THE  ASTRONOMICAL  ALMANAC  509 

10.21  Bright  Stars  512 

10.22  Variable  Stars  513 

10.23  Double  and  Multiple  Stars  515 

10.24  Photometric  Standards  516 

10.25  Radial-Velocity  Standards  518 

10.26  Spectral  Classification  519 

10.27  Pulsars  521 

10.3  CLUSTERS  AND  GALAXIES 

10.31  Open  Cluster  Data  522 

10.32  Globular  Star  Cluster  Data 

10.33  Bright  Galaxies  528 

10.34  Quasi-Stellar  Objects  530 

10.4  SOURCES  CATEGORIZED  BY  WAVELENGTH  REGION  531 

10.41  Radio-Source  Positional  Calibrators  531 

10.42  Radio-Flux  Calibrators  532 

10.43  X-Ray  Sources  533 

10.5  REFERENCES  534 

1 1  /  COMPUTATIONAL  TECHNIQUES  541 

11.1  INTRODUCTION  TO  COMPUTING  TECHNIQUES  541 

11.2  INTERPOLATION  AND  SUBTABULATION  546 

1 1 .21  Introduction  and  Notation  546 

11.22  Interpolation  Formulas  547 

1 1 .23  Inverse  Interpolation  548 

11.24  Polynomial  Representations  548 


522 
526 


xiv 


CONTENTS 


11.3  PLANE  AND  SPHERICAL  TRIGONOMETRY  549 

11.4  MATRIX  AND  VECTOR  TECHNIQUES  552 

1 1 .41  Rotation  of  Axes  Using  Matrices  552 

11.42  Spherical  Coordinates  Using  Vectors  553 

1 1 .43  Specific  Coordinate  Transformations  555 

11.5  NUMERICAL  CALCULUS  560 

11.51  Numerical  Differentiation  560 

1 1 .52  Numerical  Integration  562 

11.6  STATISTICS  566 

1 1 .61  The  Accumulation  of  Error  566 

1 1 .62  The  Method  of  Least  Squares  568 

11.7  REFERENCES  574 


12 /CALENDARS  575 

12.1  INTRODUCTION  575 

12.11  Astronomical  Bases  of  Calendars  576 

12.12  Nonastronomical  Bases  of  Calendars:  the  Week  577 

12.13  Calendar  Reform  and  Accuracy  578 

12.14  Historical  Eras  and  Chronology  579 

12.2  THE  GREGORIAN  CALENDAR  580 

12.21  Rules  for  Civil  Use  580 

12.22  Ecclesiastical  Rules  581 

1 2.23  History  of  the  Gregorian  Calendar  583 

12.3  THE  HEBREW  CALENDAR  584 

12.31  Rules  584 

12.32  History  of  the  Hebrew  Calendar  588 

12.4  THE  ISLAMIC  CALENDAR  589 

12.41  Rules  589 

12.42  History  of  the  Islamic  Calendar  591 

12.5  THE  INDIAN  CALENDAR  591 

12.51  Rules  for  Civil  Use  591 

12.52  Principles  of  the  Religious  Calendar  592 

12.53  History  of  the  Indian  Calendar  594 

12.6  THE  CHINESE  CALENDAR  594 

12.61  Rules  595 

12.62  History  of  the  Chinese  Calendar  599 

12.7  JULIAN  DAY  NUMBERS  AND  JULIAN  DATE  600 

12.8  THE  JULIAN  CALENDAR  600 

12.81  Rules  601 

12.82  History  of  the  Julian  Calendar  601 

12.9  CALENDAR  CONVERSION  ALGORITHMS  603 

12.91  Converting  Day  of  the  Week  603 

12.92  Converting  between  Gregorian  Calendar  Date  and  Julian  Day  Number  604 


CONTENTS 


XV 


12.93  Converting  Between  Islamic  Tabular  Calendar  Date 
and  Julian  Day  Number  604 

12.94  Converting  between  Indian  Civil  Calendar  and  Julian  Day  Number  605 

12.95  Converting  between  Julian  Calendar  Date  and  Julian  Day  Number  606 

12.10  REFERENCES  606 

13  /  HISTORICAL  INFORMATION  609 

13.1  HISTORY  OF  THE  ALMANACS  609 

13.11  The  American  Ephemeris  609 

13.12  The  American  Ephemeris  and  Nautical  Almanac  613 

13.13  The  Cooperative  British  and  American  Almanacs  (1960  to  Present)  614 

13.2  HISTORY  OF  INTERNATIONAL  COOPERATION  616 

13.21  Cooperation  Prior  to  the  IAU  616 

13.22  International  Astronomical  Union  617 

13.23  Other  International  Organizations  621 

13.3  HISTORICAL  LIST  OF  AUTHORITIES  621 

13.31  Introduction  621 

1 3.32  The  Nautical  Almanac  (1 767-1 900)  622 

13.33  The  American  Ephemeris  (1855-1900)  631 

13.34  The  Nautical  Almanac,  and  The  American  Ephemeris  (1901-1 983)  639 

1 3.35  System  of  Constants  (1 968-1 983)  656 

13.4  REFERENCES  657 

1 4  /  RELATED  PUBLICATIONS  667 

14.1  CURRENT  PUBLICATIONS  667 

14.1 1  Joint  Publications  of  the  Royal  Greenwich  Observatory  and  the  United  States 
Naval  Observatory  667 

14.12  Other  Publications  of  the  United  States  Naval  Observatory  668 

14.13  Other  Publications  of  the  Royai  Greenwich  Observatory  669 

14.14  Publ  ications  of  Other  Countries  669 

14.2  ASTRONOMICAL  PAPERS  PREPARED  FOR  THE  USE  OF  THE  AMERICAN 
EPHEMERIS  AND  NAUTICAL  ALMANAC  670 

14.3  UNITED  STATES  NAVAL  OBSERVATORY  CIRCULARS  675 

14.4  PUBLICATIONS  OF  THE  UNITED  STATES  NAVAL  OBSERVATORY, 
SECOND  SERIES  677 

14.5  SELECTED  NAO  TECHNICAL  NOTES  OF  THE  ROYAL  GREENWICH 
OBSERVATORY  684 

14.6  LISTS  OF  APPENDICES  AND  SUPPLEMENTS  685 

14.61  The  British  Nautical  Almanac  685 

14.62  The  American  Ephemeris  688 

14.63  Joint  Supplements  and  Appendices  691 


xvi 


CONTENTS 


15/ REFERENCE  DATA  693 

15.1  Fundamental  Constants  (1986  Recommended  Values)  693 

15.2  IAU  (1976)  System  of  Astronomical  Constants  696 

1 5.3  Time  and  Standard  Epochs  698 
15.4-  Sun,  Earth,  and  Moon  700 

15.5  Geodetic  Reference  Systems  702 

15.6  Planets:  Mean  Elements  704 

15.7  Planets:  Rotational  Data  705 

15.8  Planets:  Physical  and  Photometric  Data  706 

15.9  Satellites:  Orbital  Data  708 

15.10  Satellites:  Physical  and  Photometric  Data  710 

15.11  Planetary  Rings  712 

15.12  Constellation  Names  and  Abbreviations  713 

15.13  Mathematical  Constants  714 

15.14  Energy  Conversion  Factors  715 

15.15  Units  of  Length,  Speed,  and  Mass  716 

15.16  Greek  Alphabet  717 

15.17  International  System  of  Units  (SI)  718 

15.1  REFERENCES  719 

GLOSSARY  721 


Index  741 


LIST  OF  FIGURES 


1 .23 1 . 1  Calculation  of  sidereal  time  5 

1.233.1  Variation  in  the  equation  of  time  through  the  year  6 

1.31.1  Representation  of  the  vector  r  in  rectangular  coordinates  10 

1.321.1  Equatori  al  and  ecliptic  reference  planes    1 2 

1,333.1  Geocentric  and  geodetic  coordinates  15 

1 .337. 1  Relation  between  geographic  latitude  and  the  altitude  of  the  celestial  pole    1 8 

1 .36 1 . 1  Parallax  of  an  object  22 

1 .4 1 1 . 1  Geometric  properties  of  conic  sections  25 

1 .4 1 2. 1  Angular  orbital  elements  27 

2.25.1  Meridian  relations  and  time  55 

2.27.1  World  map  of  time  zones  57 

3.21.1  The  ecliptic  and  equator  at  epoch  and  date  100 

3.21.2  The  precession  angles  Q,,  za-  and  6A  102 
3.222.1  The  mean  and  true  equators  of  date  115 
3.251.1  Light-time  aberration  128 

3.252.1  Stellar  aberration  128 

3.26.1  Gravitational  light  deflection  136 

3.26.2  Light  from  the  planets  and  stars  deflected  by  the  sun    1 38 

4.21. 1  The  Earth's  surface  and  reference  surfaces  201 

4.22. 1  Geocentric  and  geodetic  latitude  202 

4.22.2  Astronomic  latitude  and  longitude  203 

4.22.3  Deflection  of  the  vertical  on  a  unit  sphere  204 

4.22.4  Geocentric  cartesian  coordinates  205 
4.231.1  Altitude  and  azimuth  208 

4.233. 1  UTM  and  UPS  grid  zone  designations    21 1 

4.242,1  Major  geodetic  datum  locations  219 

4.5 1 . 1  Length  of  day  from  1 656  to  1 988  267 

4.5 1 .2  At  from  A.D.  700  to  1 600  268 

4.5 1.3  At  from  700  B.C.  to  A.D.  200  268 

4.5 1 .4  log  At  from  700  B.C.  to  a.d.  1 980  269 

4.52. 1  Polar  motion,  1 980  September  28  to  1 990  July  27  270 

4.52.2  X  and  Y  components  of  polar  motion  from  the  ILS,  1 899.9  to  1979.0    27 1 

4.52.3  X  and  K  components  of  polar  motion,  1846.0  to  1891.5  272 


5.212.1 
5.321.1 


The       coordinate  system,  in  which  figure-induced  accelerations  are  calculated  283 
Diagram  of  geometry  for  planetary  radar  ranging  295 

xvii 


xvjjj  LIST  OF  FIGURES 

5.714. 1     The  relationship  between  the  B  1950.0  and  J2000.0  reference  frames  and  the  orbital 
plane  314 

6.11.1  The  orbital  elements  used  to  describe  the  orbital  plane  relative  to  a  reference  plane  326 

6.1 1.2  An  equivalent  form  of  the  orbital  elements.  The  end-on  view  of  a  great  circle  on  the 
celestial  sphere  is  represented  as  a  straight  line.  326 

6.12.1       The  Laplacian  plane  328 

6.15.1  The  satellite  orbit  referred  to  an  intermediate  plane  334 

6.15.2  Coordinates  of  the  satellite  relative  to  the  planet  335 

6.16.1  Planetocentric  celestial  sphere  337 

6. 16.2  Spherical  triangle  used  to  compute  U,  B,  and  P  337 

6. 1 6.3  Spherical  triangle  used  to  compute  a  and  p  —  P  337 

6. 16.4  Apparent  orbit  of  a  satellite  as  projected  on  the  geocentric  sphere  339 
6.2. 1        Reference  system  for  Phobos  and  Deimos  344 

6.32. 1       Reference  system  for  Amalthea  and  Thebe  350 

6.421.1     Reference  plane  for  Mimas,  Enceladus,  Tethys,  and  Dione  357 

6.422.1  Reference  system  for  Rhea,  Titan,  Hyperion,  Iapetus,  and  Phoebe  361 

6.422.2  Angles  needed  to  evaluate  solar  perturbations  on  Titan  362 
6.5.1  Reference  system  for  the  Uranian  satellites  372 

6.61.1  Reference  system  for  Triton  374 

6.62.1  Reference  system  for  Nereid  376 

7.11.1  The  position  of  the  north  pole  and  prime  meridian  of  a  planet  in  Earth  equatorial 
coordinates  384 

7. 1 1.2  Planetocentric  and  planetographic  coordinate  systems  386 

7.12.1  The  basic  vectors  and  the  angle  of  illumination  389 

7.12.2  The  geometric  appearance  of  the  apparent  polar  radius,  b'  391 

7. 1 2.3  The  disk  of  a  planet  as  seen  by  an  observer  on  the  Earth  392 

7.12.4  Planetocentric  unit  vectors  for  points  of  interest  on  the  disk  of  the  planet,  and  the  angles 
between  the  Earth's  equator  of  J2000.0  and  the  planet's  equator  of  date  394 

8.22.1  Geometric  construct  for  determining  whether  eclipse  will  occur  426 

8.231 . 1  Geometric  parameters  of  the  Earth's  penumbral  shadow  428 

8.231.2  Geometric  parameters  of  the  Earth's  umbral  shadow  429 
8.2321.1  Limiting  conditions  for  lunar  eclipses  430 

8.242. 1  Geometric  parameters  for  a  partial  solar  eclipse,  when  Moon  is  externally  tangent  432 

8.2421 .1  Geometric  parameters  for  a  partial  solar  eclipse  when  Moon  is  internally  tangent  434 

8.32 1 . 1  Transformation  of  geocentric  equatorial  coordinates  to  the  fundamental  plane  435 

8.323. 1  Components  of  shadow  cones  in  the  Besselian  fundamental  reference  system  438 

8.323.2  Relationships  among  angular  semidiameter,  apparent  semidiameter,  and  parallax  439 

8.323.3  Vertex  angle  of  the  penumbra  440 

8.323.4  Vertex  angle  of  the  umbra  440 

8.331.1  Angular  quantities  in  the  geocentric  equatorial  plane  442 

8.352.1  Relationship  between  rectangular  and  polar  reference  systems  451 

8.3556.1  Definition  of  auxiliary  quantity  ip  458 

8.3623. 1  Magnitude  is  the  fraction  of  the  linear  diameter  of  the  Sun  covered  by  the  Moon  464 

8.3623.2  Obscuration  is  the  fraction  of  the  area  of  the  solar  disk  obscured  by  the  Moon  465 


9.311.1 


The  analemmic  curve  485 


LIST  OF  FIGURES 

9.331.1     The  horizon  at  rising  or  setting  488 

9.34.1       Ground  illumination  from  various  sources  491 

9.41.1       Fundamental  plane  showing  path  of  occultation  497 

9.5.1        PZS  triangle  for  Polaris  499 

9.51.1       Polaris  north  polar  distance  2096-2 1 05  502 


1 1 . 1 . 1       Spherical  triangle  542 
11.3.1      Arc  of  circle  551 
11.42.1     Triangle  on  unit  sphere  555 


LIST  OF  TABLES 


1 .342. 1  Variations  in  the  Earth's  Rate  of  Rotation  19 

2,33.1  Techniques  for  Measuring  Earth's  Rotation  62 

2,45. 1  Error  Budgets  for  Common  View  GPS  Time  Transfer  68 

2.58. 1  Time  and  Frequency  Steps  by  WWV  and  MC  (USNO)  86 

3.211.1  Accumulated  Precession  Angles  104 

3.214.1  Precession  Angles  1984  January  ld0h  107 

3.222. 1  Nutation  in  Longitude  and  Obliquity  Referred  to  the  Mean  Ecliptic  of  Date    1 1 2 

3.222.2  Fundamental  Arguments  114 

3.224.1  Corrections  to  IAU  1980  Nutation  Series    1 16 

3.224.2  Planetary  Terms  in  Nutation,  Combined  Direct  and  Indirect  Effects    1 1 8 
3.253.1  Coefficients  (nma  I  c)  for  the  Major  Planets  132 

3.26.1  Apparent  Deflection  Angles  138 

3.344.1  Second-Order  Terms  159 

3.344.2  Errors  Due  to  Neglecting  Second-Order  Terms    1 60 
3.58. 1  Selected  Star  Positions  on  FK4  and  FK5  Systems    1 8 1 

4.242.1  Earth  Ellipsoids  220 

4.242.2  Geodetic  Datums  221 

4.32.1  GEM-T1  Normalized  Coefficients  (x  106)  228 

4.331.1  Step  2  Solid  Tide  Corrections  When  k2  =  0.  30  in  Step  1  (Using  a  Cutoff  Amplitude  of 

9x  I0~n  for  Am6ksHs)  235 

4.34.1  Ocean  Tide  Coefficients  from  the  Schwiderski  Model  242 

4.351.1  Displacement  Due  to  Ocean  Loading  (cm  in  amplitude  and  degree  in  phase)  245 

4.36.1  Cartesian  Rotation  Vector  for  Each  Plate  Using  Kinematic  Plate  Model  AMO-2  (No  Net 

Rotation)  250 

4.37. 1  Zonal  Tide  Terms  with  Periods  Up  to  35  Days  252 

4.37.2  Zonal  Tide  Terms  with  Periods  Greater  than  35  Days  253 

5.214.1  Lunar  Libration  Angles  and  Rates  285 

5.311.1  Transit  Circle  Observations  from  the  U.S.  Naval  Observatory  that  have  been  used  in  the 

JPL  Ephemerides,  DEI  18    29 1 

5.322. 1  Radar-Ranging  Observations  Used  Directly  in  DEI  18  297 

5.332.1  Mariner  9  Orbiter  Normal  Range  Points  to  Mars  298 

5.41.1  The  Observational  Data  Used  for  the  Adjustment  of  DE118/LE62  301 

5.42.1  Values  and  Formal  Standard  Deviations  of  the  Constants  Used  in  DEI  18/  LEI  18 
(DE200/LE200)  302 

5.42.2  The  Initial  Conditions  of  the  Ephemerides  at  JED  2440400.5  in  AU  and  AU/day  304 
5.53. 1  Granule  Length  and  Polynomial  Degree  for  the  1 1  Ephemeris  Bodies  307 

xxi 


xxii 

5.8.1 
5.8.2 


6.13.1 

7.41.1 

7.42.1 

7.43.1 

7.44.1 

7.45.1 

7.46.1 

7.47.1 

7.48.1 

7.51.1 

7.52.1 

7.52.2 

7.53.1 

7.53.2 

7.54.1 

7.55.1 

7.56.1 

8.113.1 
8.422.1 

9.211.1 

9.22.1 

9.22.2 

9.221.1 

9.222.1 

9.222.2 

9.23.1 

9.34.1 


1 1  I.I 

11.1.2 

I  1.1.3 

11.21.1 

11.3.1 

11.51.1 

1 1.61.1 

12.21.1 
12.31.1 
12.31.2 
12.31.3 
12.311.1 


LIST  OF  TABLES 

Classical  Keplerian  elements  at  the  epoch  J2000  (JED  2451545.0)  316 
Approximate  maximum  errors  of  the  Keplerian  formulas  over  the  interval 
1800-2050  316 

The  Principal  Commensurabilities  Among  Satellites  332 

Physical  Ephemeris  Parameters  for  Mercury  402 

Physical  Ephemeris  Parameters  for  Venus  402 

Physical  Ephemeris  Parameters  for  Mars  403 

Physical  Ephemeris  Parameters  for  Jupiter  404 

Physical  Ephemeris  Parameters  for  Saturn  404 

Physical  Ephemeris  Parameters  for  Uranus  405 

Physical  Ephemeris  Parameters  for  Neptune  406 

Physical  Ephemeris  Parameters  for  Pluto  406 

Rotation  Parameters  for  Mars'  Satellites  407 

Rotation  Parameters  for  Jupiter's  Satellites  409 

Standard  Cartographic  Longitudes  for  Jupiter's  Satellites  409 

Rotation  Parameters  for  Saturn's  Satellites  410 

Standard  Cartographic  Longitudes  for  Saturn's  Satellites    41 1 

Rotation  Parameters  for  Uranus'  Satellites  412 

Rotation  Parameters  for  Neptune's  Satellites  413 

Rotation  Parameters  for  Pluto's  Satellite  414 

U.S.N.O.  Solar  Eclipse  Circulars  424 
Sequences  and  Conditions  for  Contact  Times  470 

Time  of  Commencement  of  the  Seasons  477 
Geocentric  Phenomena  for  which  /(r)  =  0  479 
Geocentric  Phenomena  for  which  f'(t)  =  0  479 
Visibility  Criteria  for  Geocentric  Phenomena  480 
Synodic  Periods  of  the  Planets  and  First  Asteroids  480 
Long-Period  Cycles  of  Mercury.  Venus,  and  Mars    48 1 
Heliocentric  Phenomena  482 

Coefficients  for  Calculating  Ground  Illumination  492 


Precision  of  Angle  and  Number  of  Decimals  for  Trigonometric  Functions  544 
The  Method  of  Inverse  Use  545 

Range  of  Precision  of  the  Inverse  Determination  of  an  Angle  545 

Differences  in  Tabular  Arguments  547 

Formulas  for  Plane  and  Spherical  Triangles  550 

Derivatives  to  an  Order  of  10  561 

Accumulation  of  Error  in  Arithmetical  Operations  567 

Months  of  the  Gregorian  Calendar   58 1 
Classification  of  Years  in  the  Hebrew  Calendar  584 
Months  of  the  Hebrew  Calendar  585 
Terminology  of  the  Hebrew  Calendar  585 
Lunation  Constants  for  Determining  Tishri  1  586 


LIST  OF  TABLES  XXIH 

12.41.1  Months  of  Tabular  Islamic  Calendar  590 

12.51.1  Months  of  the  Indian  Civil  Calendar  592 

12.52.1  Solar  Months  of  the  Indian  Religious  Calendar  593 

12.61.1  Chinese  Sexagenary  Cycle  of  Days  and  Years  595 

12.61.2  Chinese  Solar  Terms  597 

12.82.1  Roman  Dating  in  the  Julian  Calendar  602 

1 3,348. 1  Adopted  Values  for  Coefficients  of  Nutation  654 


15. 1  Fundamental  Constants  ( 1 986  Recommended  Values)  693 

15.2  IAU  (1976)  System  of  Astronomical  Constants  696 

15.3  Time  and  Standard  Epochs  698 

15.4  Sun,  Earth,  and  Moon  700 

15.5  Geodetic  Reference  Systems  702 

15.6  Planets:  Mean  Elements  704 

15.7  Planets:  Rotational  Data  705 

15.8  Planets:  Physical  and  Photometric  Data  706 

15.9  Satellites:  Orbital  Data  708 

15.10  Satellites:  Physical  and  Photometric  Data  710 

15.11  Planetary  Rings  712 

15.12  Constellation  Names  and  Abbreviations  713 

15.13  Mathematical  Constants  714 

15.14  Energy  Conversion  Factors  715 

15.15  Units  of  Length,  Speed,  and  Mass  716 

15.16  Greek  Alphabet  717 

15.17  International  System  of  Units  (SI)  718 


Foreword 


The  Explanatory  Supplement  to  the  Astronomical  Ephemeris  and  the  American 
Ephemeris  and  Nautical  Almanac  was  first  published  in  1961  "to  provide  the  user 
of  these  publications  with  fuller  explanations  of  these  publications  themselves," 
This  supplement  was  reprinted  with  amendments  in  1972,  1974,  and  1977.  It  was 
allowed  to  go  out  of  print  because  the  International  Astronomical  Union  decided  to 
introduce  new  astronomical  constants,  a  new  standard  epoch  and  equinox,  new  time 
arguments,  a  new  astronomical  reference  frame,  and  new  fundamental  ephemerides, 
all  of  which  required  major  revisions  to  the  supplement.  In  addition,  The  Astro- 
nomical Ephemeris  and  The  American  Ephemeris  and  Nautical  Almanac  series  were 
continued  from  1981  with  a  new  title,  The  Astronomical  Almanac,  which  contains  a 
revised  content  and  arrangement  and  is  printed  only  in  the  United  States.  The  work 
of  computation,  preparation,  proofreading,  and  production  of  reproducible  material 
is  still  shared  between  the  United  Kingdom  and  the  United  States  of  America. 

Many  changes  in  the  arrangement  of  the  almanac  were  introduced  in  the  edition 
for  1981,  and  major  changes  in  the  basis  of  the  ephemerides  were  made  in  the  edition 
for  1984.  The  changes  in  1981  included:  the  replacement  of  the  hourly  ephemeris 
of  the  Moon  by  a  tabulation  of  daily  polynomial  coefficients;  the  introduction  of 
a  new  system  of  rotational  elements  for  the  planets;  the  extension  of  the  scope  of 
the  data  on  satellites;  the  inclusion  of  orbital  elements  and  other  data  for  minor 
planets  of  general  interest;  the  extension  of  the  list  of  bright  stars;  the  inclusion  of 
new  lists  of  data  for  other  types  of  stars  and  nonstellar  objects;  new  explanatory 
material;  and  a  glossary  of  terms.  The  changes  in  1984  included:  the  replacement 
of  the  classical  theories  by  the  Einsteinian  theories  of  special  and  general  relativ- 
ity; the  replacement  of  ephemeris  time  by  dynamical  timescales;  the  adoption  of 
new  fundamental  heliocentric  ephemerides  based  on  a  numerical  integration  of  the 
motion  of  all  the  planets  and  of  the  Moon;  and  the  use  of  the  IAU  (1976)  system 

XXV 


xxv|  FOREWORD 

of  astronomical  constants,  the  standard  equinox  of  J2000.0,  and  the  FK5  celestial 
reference  system.  An  account  of  these  changes  was  given  in  the  39-page  Supplement 
to  the  Astronomical  Almanac  for  1984,  which  was  bound  with  the  Almanac,  and  is 
also  given  here  in  great  detail  in  Chapter  13. 

Most  of  the  text  in  this  supplement  has  been  written  for  readers  who  are  familiar 
with  the  principal  concepts  of  spherical  and  dynamical  astronomy  but  who  require 
detailed  information  about  the  data  published  in  The  Astronomical  Almanac  and 
about  how  to  use  the  data  for  particular  purposes.  Similarly,  the  reference  data 
given  in  this  supplement  are  presented  in  forms  that  are  appropriate  to  users  who 
understand  the  significance  of  the  quantities  whose  values  are  given.  To  a  large 
extent,  the  chapters  are  independent  of  each  other,  but  an  introductory  overview 
has  been  given  in  Chapter  1  and  a  glossary  of  terms  has  been  given  at  the  end  of 
the  volume.  References  to  textbooks  and  other  sources  of  background  information 
are  given  at  the  end  of  each  chapter. 

Preliminary  proposals  for  the  new  edition  of  the  Explanatory  Supplement  were 
drawn  up  in  1979,  and  more  detailed  outlines  of  the  Supplement  were  prepared  in 
1986  by  the  staffs  of  Her  Majesty's  Nautical  Almanac  Office  and  the  U.S.  Nautical 
Almanac  Office.  By  1988,  it  was  evident  that  Her  Majesty's  Nautical  Almanac 
Office  would  not  be  able  to  participate  as  originally  planned,  and  the  U.S.  Nautical 
Almanac  Office  took  over  the  entire  project. 

The  supplement  is  organized  by  chapters  and  sections  such  that  it  can  be  up- 
dated in  the  future.  It  is  planned  that  future  reprints  will  incorporate  developments 
and  improvements.  We  hope  that  this  new  publication  will  prove  to  be  even  more 
useful  than  its  predecessor. 


Preface 


The  primary  purpose  of  this  revised  Explanatory  Supplement  is  to  provide  users  of 
The  Astronomical  Almanac  with  more  complete  explanations  of  the  significance, 
sources,  methods  of  computation,  and  use  of  the  data  given  in  the  almanac  than 
can  be  included  annually  in  the  almanac  itself.  The  secondary  purpose  is  to  provide 
complementary  information  that  doesn't  change  annually,  such  as  conceptual  ex- 
planations, lists  of  constants  and  other  data,  bibliographic  references,  and  historical 
information  relating  to  the  almanac.  It  is  hoped  that  the  Explanatory  Supplement 
will  be  a  useful  reference  book  for  a  wide  range  of  users  in  the  fields  of  astronomy, 
geodesy,  navigation,  surveying,  and  space  sciences,  and  also  teachers,  historians, 
and  people  interested  in  the  field  of  astronomy. 

Many  users  of  the  almanac  are  not  the  professional  astronomers  for  whom  it 
is  primarily  designed,  and  so  this  supplement  contains  some  explanatory  material 
at  an  elementary  level;  it  is  not,  however,  intended  for  use  as  a  basic  textbook 
on  spherical  and  dynamical  astronomy.  In  some  respects  it  does  supplement  such 
textbooks  since  it  is  concerned  with  new  concepts  or  new  techniques. 

This  supplement  differs  in  many  respects  from  its  predecessor,  the  Explanatory 
Supplement  to  The  Astronomical  Ephemeris  and  The  American  Ephemeris  and 
Nautical  Almanac.  Vector  and  matrix  notations  have  been  introduced  and  more 
diagrams  have  been  provided.  Simple  conversion  tables  and  tables  of  quantities 
that  can  be  calculated  directly  from  simple  formulas  have  been  omitted.  Detailed 
step-by-step  examples  have  been  omitted,  and  approximation  methods  have  not 
been  given.  Most  of  the  text  is  new  but  historical  material  has  been  carried  over  for 
the  convenience  of  those  who  do  not  have  ready  access  to  the  previous  supplement. 

This  supplement  has  been  prepared  by  the  Nautical  Almanac  Office  of  the 
United  States  Naval  Observatory.  Material  has  been  contributed  by  scientists  from 
the  Nautical  Almanac  Office  of  the  Royal  Greenwich  Observatory,  Jet  Propulsion 

xxvii 


xxviii 


PREFACE 


Laboratory,  Bureau  des  Longitudes,  Time  Service  and  Astrometry  Departments 
of  the  U.S.  Naval  Observatory,  and  other  scientists.  The  authors  of  each  chapter 
have  been  indicated,  but  other  individuals  may  have  been  involved  in  contributing, 
improving,  and  checking  the  material.  The  valuable  assistance  that  has  been  given 
in  many  ways  by  other  astronomers  and  scientists  is  gratefully  acknowledged. 

Suggestions  for  improvement  of  this  supplement,  and  of  The  Astronomical  Al- 
manac itself  would  be  welcomed.  They  should  be  sent  to  the  Director,  Orbital 
Mechanics  Department,  U.S.  Naval  Observatory,  Washington,  DC  20392. 

James  B.  Hagan 
Captain,  U.S.  Navy 

Superintendent,  U.S.  Naval  Observatory 


EXPLANATORY  SUPPLEMENT 
TO  THE  ASTRONOMICAL  ALMANAC 


CHAPTER 


Introduction  to  Positional  Astronomy 

by  P.K.  Seidelmann  and  G.A.  Wilkins 


1.1  INTRODUCTION 
1.11  Purpose 

The  Astronomical  Almanac  gives  data  on  the  positions  and,  where  appropriate, 
orientations  of  the  Sun,  Moon,  planets,  satellites,  and  stars  as  they  may  be  seen 
from  the  surface  of  the  Earth  during  the  course  of  a  year.  A  proper  appreciation 
of  the  significance  of  these  data  requires  a  basic  understanding  of  the  concepts  of 
spherical  astronomy,  which  explain  how  the  varying  directions  of  celestial  objects 
may  be  represented  by  positions  on  the  surface  of  the  celestial  sphere.  In  addition,  an 
appreciation  of  why  these  celestial  objects  appear  to  move  in  the  ways  predicted  in 
The  Astronomical  Almanac  requires  an  understanding  of  the  concepts  of  dynamical 
astronomy,  which  provides  a  mathematical  explanation  of  the  objects'  motions  in 
space  under  the  influence  of  their  mutual  gravitational  attractions.  Spherical  and 
dynamical  astronomy  together  form  what  is  referred  to  here  as  positional  astronomy. 

This  text  has  been  written  for  readers  familiar  with  the  principal  concepts  of 
spherical  and  dynamical  astronomy  who  require  detailed  information  about  the 
computation  and  use  of  the  data  published  in  The  Astronomical  Almanac.  The 
primary  purpose  of  this  introductory  chapter  is  to  introduce  the  concepts,  termi- 
nology, and  notation  that  are  used  throughout  The  Astronomical  Almanac  and  this 
supplement;  rigorous  definitions,  formulas,  and  further  explanatory  information  are 
given  in  the  later  chapters  of  this  supplement.  The  glossary  gives  concise  definitions 
of  words  particular  to  spherical  and  dynamical  astronomy.  The  reference  data  are 
presented  in  forms  that  are  appropriate  to  users  who  understand  the  significance 
of  the  quantities  whose  values  are  given. 

1 


2 

1 .2   TIMESCALES  AND  CALENDARS 


EXPLANATORY  SUPPLEMENT 


1.21    Atomic  Timescales 

1.211  International  Atomic  Time  For  scientific,  practical,  and  legal  purposes  the 
standard  unit  for  the  measurement  of  intervals  of  time  is  the  SI  second,  which  is 
defined  by  the  adoption  of  a  fixed  value  for  the  frequency  of  a  particular  transition  of 
cesium  atoms.  Time  can  be  measured  in  this  unit  by  the  use  of  time  standards  based 
on  processes  of  physics.  Cesium  frequency  standards,  hydrogen  masers,  ion  storage 
devices,  and  other  such  devices  are  able  to  count  seconds  and  subdivide  them  very 
precisely.  Thus,  such  a  device  can  provide  a  timescale  whose  accuracy  is  dependent 
on  the  precision  of  the  measurement  and  the  stability  of  the  device.  Such  a  timescale 
provides  a  measure  of  time  for  identifying  the  instants  at  which  events  occur;  the 
interval  of  time  between  two  events  can  be  calculated  as  the  differences  between 
the  times  of  the  events.  The  results  of  the  intercomparison  of  about  200  frequency 
standards  located  around  the  world  are  combined  to  form  a  standard  timescale 
that  can  be  used  for  identifying  uniquely  the  instants  of  time  at  which  events 
occur  on  the  Earth.  This  standard  timescale  is  known  as  International  Atomic 
Time  (TAI).  It  is  the  basis  for  all  timescales  in  general  use.  It  is  distributed  by 
many  different  means,  including  radio  time  signals;  navigation  systems,  such  as  the 
Global  Positioning  System,  LORAN-C,  and  OMEGA;  communication  satellites; 
and  precise  time  standards. 

1.212  Relativistic  Effects  In  high- precision  timekeeping,  and  for  some  purposes 
in  solar-system  dynamics  and  astrometry,  it  is  necessary  to  take  into  account  the 
effects  of  special  and  general  relativity  and  to  recognize,  for  example,  that  the  rate  of 
an  atomic  clock  depends  on  the  gravitational  potential  in  which  it  is  placed  and  that 
the  rate  will  appear  to  depend  on  its  motion  relative  to  another  clock  with  which 
it  is  compared.  In  particular,  one  should  recognize  that  the  independent  variable, 
or  timescale,  of  the  equations  of  motion  of  the  bodies  of  the  solar  system  (or  of  a 
subset  of  them)  depends  upon  the  coordinate  system  to  which  the  equations  refer. 
The  relationship  between  any  such  timescale  and  TAI,  which  is  appropriate  for  use 
at  sea- level  on  the  surface  of  the  Earth,  may  be  specified  by  an  appropriate  formula 
containing  periodic  terms  and  an  arbitrary  linear  term.  Two  such  timescales  have 
been  given  special  names,  and  these  have  been  used  in  The  Astronomical  Almanac 
since  1984.  Terrestrial  Dynamical  Time  (TDT)  is  used  as  the  timescale  for  the 
geocentric  ephemerides  (giving,  for  example,  apparent  positions  with  respect  to 
the  center  of  the  Earth),  whereas  Barycentric  Dynamical  Time  (TDB)  is  used  as 
the  timescale  for  the  ephemerides  that  refer  to  the  center  of  the  solar  system. 
TDT  differs  from  TAI  by  a  constant  offset,  which  was  chosen  arbitrarily  to  give 
continuity  with  ephemeris  time  (see  Section  1.22),  whereas  TDB  and  TDT  differ 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  3 

by  small  periodic  terms  that  depend  on  the  form  of  the  relativistic  theory  being 
used. 

In  1991  the  International  Astronomical  Union  (IAU)  adopted  resolutions  in- 
troducing new  timescales  which  all  have  units  of  measurement  consistent  with  the 
proper  unit  of  time,  the  SI  second.  Terrestrial  Time  (TT)  is  the  time  reference 
for  apparent  geocentric  ephemerides,  has  a  unit  of  measurement  of  the  SI  second, 
and  can  be  considered  equivalent  to  TDT.  Geocentric  Coordinate  Time  (TCG)  and 
Barycentric  Coordinate  Time  (TCB)  are  coordinate  times  for  coordinate  systems 
that  have  their  origins  at  the  center  of  mass  of  the  Earth  and  of  the  solar  system, 
respectively.  Their  units  of  measurement  are  chosen  to  be  consistent  with  the  proper 
unit  of  time,  the  SI  second.  Because  of  relativistic  transformations,  these  timescales 
will  exhibit  secular  variations  with  respect  to  Terrestrial  Time.  For  example,  TDB 
and  TCB  will  differ  in  rate  by  approximately  49  seconds  per  century. 

1.22  Dynamical  Time 

The  equations  of  motion  of  the  bodies  of  the  solar  system  involve  time  as  the  inde- 
pendent variable.  Until  1960,  mean  solar  time  was  used,  but  when  it  was  recognized 
that  the  rotation  of  the  Earth  was  irregular,  a  new  timescale  was  introduced  that 
corresponded  to  the  independent  variable.  This  was  called  ephemeris  time  (ET)  and 
was  based  on  the  motion  of  the  Sun.  Later,  when  it  was  necessary  to  distinguish  be- 
tween relativistic  effects — which  cause  differences  between  timescales  for  the  center 
of  the  Earth  and  the  center  of  the  solar  system — the  dynamical  time  arguments, 
Terrestrial  Dynamical  Time,  and  Barycentric  Dynamical  Time,  were  introduced. 
TDT  was  defined  in  a  way  that  maintains  continuity  with  ET.  Since  ET  was  not 
specified  as  either  TDT  or  TDB,  either  can  be  considered  to  be  the  extension  of  ET. 
Since  TDT  is  defined  in  terms  of  TAI,  which  can  be  determined  only  back  to  1956, 
the  determination  of  dynamical  time  prior  to  1956  must  be  based  on  comparison 
of  observations  and  theories  of  the  motions  of  the  Sun,  Moon,  and  planets. 

1 .23  Rotational  Timescales 

As  the  Earth  rotates  about  its  axis,  it  also  moves  in  its  orbit  around  the  Sun. 
Thus,  while  the  Earth  rotates  once  with  respect  to  a  fixed  star,  the  Earth  moves 
in  its  orbit  so  that  additional  rotation  is  necessary  with  respect  to  the  Sun.  The 
rotation  of  the  Earth  with  respect  to  the  equinox  is  called  sidereal  time  (ST).  The 
Earth's  rotation  with  respect  to  the  Sun  is  the  basis  of  Universal  Time,  also  called 
solar  time.  Since  the  rotation  of  the  Earth  is  subject  to  irregular  forces,  sidereal 
time  and  Universal  Time  are  irregular  with  respect  to  atomic  time.  Sidereal  time  is 
the  hour  angle  of  the  catalog  equinox  and  is  subject  to  the  motion  of  the  equinox 
itself  due  to  precession  and  nutation.  Ot  herwise,  it  is  a  direct  measure  of  the  diurnal 
rotation  of  the  Earth.  Sidereal  time  reflects  the  actual  rotation  of  the  Earth  and  can 


4  EXPLANATORY  SUPPLEMENT 

be  determined  by  observations  of  stars,  artificial  satellites,  and  extragalactic  radio 
sources.  On  the  other  hand,  the  apparent  diurnal  motion  of  the  Sun  involves  both 
the  nonuniform  diurnal  rotation  of  the  Earth  and  the  motion  of  the  Earth  in  its 
orbit  around  the  Sun.  In  practice,  Universal  Time  is  directly  related  to  sidereal  time 
by  means  of  a  numerical  formula.  For  each  local  meridian  there  is  a  corresponding 
local  sidereal  time.  The  measure  of  the  rotation  of  the  Earth  with  respect  to  the 
true  equinox  is  called  apparent  sidereal  time.  The  measure  with  respect  to  the  mean 
equinox  of  date  is  referred  to  as  mean  sidereal  time.  Apparent  sidereal  time  minus 
mean  sidereal  time  is  called  the  equation  of  the  equinoxes. 

1.231  Sidereal  Time  The  local  hour  angle  of  the  equinox  has  a  special  significance 
since  it  serves  to  specify  the  orientation  of  the  celestial  (equatorial)  coordinate 
system  with  respect  to  the  local  terrestrial  coordinate  system  in  which  hour  angle 
is  measured.  The  local  hour  angle  of  the  equinox  is  known  as  the  local  sidereal  time 
(LST)  and  it  increases  by  24"  in  a  sidereal  day.  The  fundamental  relation  for  some 
celestial  object  X  is 

local  hour  angle  of  X  =  local  sidereal  time  —  right  ascension  of  X.  (1.231-1) 

This  may  be  written  in  the  abbreviated  form 

LHA  X  =  LST  -  RA  X.  (1.231-2) 

The  value  of  the  local  sidereal  time  is  equal  to  the  right  ascension  of  the  local 
meridian,  and  so  may  be  determined  by  observing  the  meridian  transits  of  stars 
of  known  right  ascensions,  the  positions  of  radio  sources  using  Very  Long  Baseline 
Interferometry,  or  the  distance  from  a  location  on  Earth  to  a  retrorefiector  on  the 
Moon  by  Lunar  Laser-Ranging.  Local  sidereal  time  can  be  calculated  from  the 
sidereal  time  on  the  prime  meridian  (Greenwich)  when  the  difference  in  geographic 
longitude  is  known  (see  Figure  1.231.1);  thus 

local  sidereal  time  =  Greenwich  sidereal  time  +  east  longitude.  (1.231-3) 

1.232  Solar  and  Universal  Time  The  general  form  of  the  relationship  between 
sidereal  time  and  Universal  Time  may  be  derived  by  substituting  the  Sun  for  X  in 
the  above  equation.  The  local  hour  angle  of  the  Sun  is,  by  definition,  12  hours  less 
than  local  apparent  solar  time  (LAT)  and  so 

LAT  =  LST  —  RA  Sun  -  12?  (1.232-1) 

The  right  ascension  of  the  Sun  does  not  vary  uniformly  with  time  nor  does  the 
Sun  move  on  the  equator,  but  it  is  possible  to  introduce  the  concept  of  a  point  U 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


Local  meridian 


Computed  Mean  Sun  (U) 


Equinox 


1.002738  AT 


GHA  X 

Equation  of  time 

DAT] 
KA  U 

 1 

UT. 

GHA  Sun 

LMT  - 

RA  Sun 

LA  Sun 

 > 

 s 

GST 

Longitude 

LST 

LHA  X 

RA  X 

1  r 

Greenwich  meridian  X 


True  Sun 


Figure  1.231.1 

Calculation  of  sidereal  time 


that  moves  around  the  celestial  equator  at  a  uniform  rate.  Hence,  Universal  Time 
is  defined  in  terms  of  Greenwich  sidereal  time  (GST)  by  an  expression  of  the  form 


UT  =  GST  -  RA  U-  12\ 


(1.232-2) 


where  the  coefficients  in  the  expression  for  RA  U  are  chosen  so  that  UT  may  for 
most  purposes  be  regarded  as  mean  solar  time  on  the  Greenwich  meridian. 

1.233  Equation  of  Time  The  difference  between  local  mean  time  (LMT)  and  local 
apparent  solar  time  is  known  as  the  equation  of  time,  and  the  relationship  is  now 
expressed  in  the  form 


LAT  =  LHA  Sun  +  12h  =  LMT  +  equation  of  time, 


(1.233-1) 


although  the  equation  of  time  used  to  be  regarded  as  the  correction  to  be  applied  to 
apparent  time  to  obtain  mean  time.  The  principal  contributions  to  the  equation  of 
time  arise  from  the  eccentricity  of  the  Earth's  orbit  around  the  Sun  (which  causes 
a  nonuniformity  in  the  apparent  motion  of  the  Sun  around  the  ecliptic)  and  the 
inclination  of  the  plane  of  the  ecliptic  to  the  plane  of  the  equator.  The  equation  of 
time  varies  through  the  year  in  a  smoothly  periodic  manner  by  up  to  16  minutes, 
as  shown  in  Figure  1.233.1 


6 


EXPLANATORY  SUPPLEMENT 


+3  m  45  s 
+2  m  43  s 

OmOs 

— 3  rn  16s 
-4  m  27  s 


-9  m  12  s 

-12m45s 
-13  m  24  s 
-14m  14s 


+16m  19s 
+15  m  30s 
+  14m  Os 

+1 1  m  36  s 
+9  m  43  s 


+5m  13  s 
+4m  29  s 

+2  m  33  s 


-0  m  35  s 

-2m  39s 
-3  m  23  s 
-4  m  36  s 
-5  m  47  s 
— 6  m  21  s 


Figure  1.233.1 

Variation  in  the  equation  of  time  through  the  year 


1 .24   Coordinated  Universal  Time  (UTC) 

Although  TAI  provides  a  continuous,  uniform,  and  precise  timescale  for  scientific 
reference  purposes,  it  is  not  convenient  for  general  use.  In  everyday  life  it  is  more 
convenient  to  use  a  system  of  timescales  that  correspond  to  the  alternation  of  day 
and  night,  apply  over  fairly  wide  areas,  and  can  be  easily  related  to  each  other  and 
to  TAI.  In  these  timescales,  the  numerical  expression,  or  measure,  of  the  time  of 
an  event  is  given  in  the  conventional  form  of  years,  months,  days,  hours,  minutes, 
seconds,  and  decimals  of  seconds — i.e.,  as  a  calendar  date  and  time  of  day.  The 
standard  time  on  the  prime  meridian  is  known  as  Coordinated  Universal  Time 
(UTC).  UTC  is  an  atomic  timescale  that  is  kept  in  close  agreement  with  Universal 
Time  (UT),  which  is  a  measure  of  the  rotation  of  the  Earth  on  its  axis.  The  rate 
of  rotation  of  the  Earth  is  not  uniform  (with  respect  to  atomic  time),  and  the 
difference  between  TAI  and  UT  is  increasing  irregularly  by  about  1  second  every 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  7 

18  months.  The  difference  between  UTC  and  TAI  is  always  an  integral  number  of 
seconds.  UTC  is  maintained  in  close  agreement,  to  better  than  one  second,  with  UT 
by  introducing  extra  seconds,  known  as  leap  seconds,  to  UTC,  usually  at  the  end  of 
the  last  day  of  June  or  December.  The  Earth  is  divided  into  standard-time  zones 
in  which  the  time  kept  is  that  of  a  standard  meridian  (multiples  of  15°  longitude). 
Thus,  the  local  noon  at  any  place  in  the  zone  is  near  twelve  noon  of  the  standard 
time.  These  standard  times  usually  differ  from  UTC  by  integral  numbers  of  hours. 
In  summer,  the  time  may  be  advanced  to  increase  the  hours  of  daylight  in  the 
evening. 

1.241  Greenwich  Mean  Time  (GMT)  In  the  past,  the  term  Greenwich  Mean  Time 
(GMT)  has  been  used.  It  is  the  basis  of  the  civil  time  for  the  United  Kingdom  and, 
as  such,  is  related  to  UTC.  However,  in  navigation  terminology,  GMT  has  been  used 
as  Universal  Time.  For  precise  purposes  it  is  recommended  that  the  term  GMT  not 
be  used,  since  it  is  ambiguous. 

Prior  to  1925,  GMT  was  measured  for  astronomical  purposes  from  noon  to 
noon,  so  that  the  date  would  not  change  in  the  middle  of  a  night  for  an  observer  in 
Europe.  In  1925  that  practice  was  discontinued,  and  GMT  was  then  measured  from 
midnight  to  midnight.  Thus,  care  must  be  taken  in  using  time  references  before 
1925. 

1.25   The  Enumeration  of  Dates 

1.251  Civil  Calendars  The  alternation  of  day  and  night  is  a  clear  physical  phe- 
nomenon that  is  repetitive  and  countable;  so  the  solar  day  is  the  basic  unit  of  all 
calendars.  Some  calendars  use  the  lunar  month  and/or  solar  year  for  longer  units, 
but  these  periods  are  neither  fixed  nor  made  up  of  integral  numbers  of  days.  More- 
over, the  length  of  the  lunar  month  is  not  a  simple  rational  fraction  of  the  solar 
year.  However,  the  cycle  of  weeks,  each  of  seven  named  days,  is  very  widely  used, 
and  it  continues  independently  of  the  enumeration  of  days  in  the  calendar. 

The  Gregorian  calendar  is  now  commonly  used  throughout  most  countries  of  the 
world  for  the  identification  of  solar  days.  It  was  derived  from  the  Julian  calendar, 
so  named  because  its  system  of  months  was  introduced  by  Julius  Caesar.  The 
present  system  for  the  enumeration  of  years  in  the  Julian  calendar  was  introduced 
only  gradually  after  A.D.  500;  the  extension  of  the  present  system  to  earlier  years 
is  known  as  the  Julian  proleptic  calendar.  The  change  from  the  Julian  calendar 
to  the  Gregorian  calendar  took  place  in  most  countries  in  western  Europe  (and 
in  their  colonies)  between  1583  and  1753.  However,  many  other  countries  did  not 
change  systems  until  much  later,  and  at  times  both  systems  were  used  concurrently. 
One  must  be  very  careful  when  using  astronomical  data  published  at  times  and  in 
places  where  the  calendrical  system  in  use  may  be  in  doubt.  Many  other  calendars 
have  been  used,  and  may  still  be  used  for  some  purposes,  in  other  countries.  Such 


g  EXPLANATORY  SUPPLEMENT 

calendars  often  depend  on  various  astronomical  phenomena  and  cycles,  but  are  now 
primarily  of  religious  significance. 

A  particular  instant  of  time  may  be  identified  precisely  by  giving  the  calendar 
date  (assumed  to  be  Gregorian  unless  otherwise  specified)  and  the  time  of  day  in  a 
specified  time  system. 

1.252  Julian  Date  For  many  astronomical  purposes  it  is  more  convenient  to  use  a 
continuous  count  of  days  that  is  known  as  the  Julian  day  number.  The  day  number 
is  extended  by  the  addition  of  the  time  of  day,  expressed  as  a  decimal  fraction  of 
day,  to  give  the  Julian  date  (JD).  It  is  important  to  note,  however,  that  the  integral 
values  of  the  Julian  date  refer  to  the  instants  of  Greenwich  mean  noon  (since  the 
system  was  introduced  when  the  astronomical  day  began  at  noon  rather  than  at 
midnight);  correspondingly,  the  Julian  date  for  0h  UT  always  ends  in  ".5".  This, 
and  the  fact  that  current  Julian  dates  require  seven  digits  to  express  the  integral 
parts,  make  the  Julian  date  system  inconvenient  for  some  purposes.  The  value  of 
JD  minus  2400000.5  is  sometimes  used  for  current  dates;  it  is  known  as  the  modified 
Julian  date  (MJD).  The  Julian  date  system  may  be  used  with  TAI,  TDT,  or  UTC, 
so  when  the  difference  is  significant,  the  particular  timescale  should  be  indicated. 

1.253  Besselian  and  Julian  Years  For  some  astronomical  purposes,  such  as  the 
specification  of  the  epoch  of  a  celestial  coordinate  system,  it  is  convenient  to  measure 
time  in  years  and  to  identify  an  instant  of  time  by  giving  the  year  and  the  decimal 
fraction  of  the  year  to  a  few  places.  Such  a  system  was  introduced  by  Bessel,  and  is 
still  in  use,  but  it  has  two  disadvantages.  First,  the  length  of  the  year  varies  slowly, 
and  second,  the  instants  at  the  beginning  of  the  years  (.0)  do  not  correspond  to 
Julian  dates,  which  are  convenient  for  use  in  dynamical  astronomy.  The  Besselian 
system  has  been  replaced  by  a  new  system  in  which  100  years  is  exactly  36525  days 
(or  1  Julian  century)  and  in  which  1900.0  corresponds  exactly  to  the  epoch  1900 
January  0.5,  from  which  time  interval  was  reckoned  in  the  principal  theories  of  the 
motions  of  the  Sun,  Moon,  and  planets.  The  old  and  new  systems  are  distinguished 
when  necessary  by  the  use  of  the  prefix  letters  "B"  and  "J."  The  standard  epoch 
that  is  now  recommended  for  use  for  new  star  catalogs  and  theories  of  motion  is 

J2000.0  =  2000  January  1.5  =  JD  2451545.0  TDB.  (1.253-1) 

1 .3    CELESTIAL  AND  TERRESTRIAL  COORDINATES 
1 .31    Coordinate  Systems  and  Frames 

In  astronomy,  it  is  necessary  and  convenient  to  represent  the  position  of  an  object, 
such  as  a  star  or  a  planet,  in  several  different  coordinate  systems  according  to  the 


1  (  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  9 

context  in  which  the  position  is  to  be  used.  Each  coordinate  system  corresponds  to 
a  particular  way  of  expressing  the  position  of  a  point  with  respect  to  a  coordinate 
frame,  such  as  a  set  of  rectangular  axes.  Often  the  coordinate  frames  with  respect 
to  which  observations  are  made  differ  from  the  coordinate  frames  that  are  most 
convenient  for  the  comparison  of  observational  data  with  theory.  In  general,  each 
position  is  represented  by  a  set  of  three  coordinates  that  specify  the  position  of  the 
object  with  respect  to  a  particular  coordinate  frame.  In  many  cases,  the  distance  of 
the  object  is  not  known;  so  two  coordinates  are  sufficient  to  represent  the  direction 
to  the  object,  although  three  direction  cosines  may  be  used. 

In  general,  an  object  is  moving  with  respect  to  the  coordinate  frame,  and  the 
coordinate  frame  is  moving  and  rotating  in  "space."  Therefore,  it  is  necessary  to 
specify  the  time  to  which  the  three  spatial  coordinates  refer  and  the  time  for  which 
the  coordinate  frame  is  defined.  These  two  times  may  be  the  same,  but  are  often 
different.  Times  may  be  expressed  in  terms  of  different  timescales.  Both  spatial 
coordinates  and  times  may  be  expressed  in  a  variety  of  units.  As  a  further  compli- 
cation, positions  may  be  of  several  kinds,  according  to  whether  or  not  allowances 
have  been  made  for  aberration,  diurnal  rotation,  refraction,  and  other  factors  that 
affect  the  direction  in  which  an  object  is  observed.  Ephemerides  and  catalogs  that 
represent  high-precision  positions  and  properties  of  astronomical  objects  at  given 
times  must  always  be  accompanied  by  a  precise  statement  that  specifies  all  of  these 
various  factors,  if  the  numbers  are  to  be  used  properly  to  their  full  precision. 

A  coordinate  frame  is  usually  represented  by  three  mutually  perpendicular 
(rectangular)  axes,  and  is  defined  by  specifying  its  origin,  a  fundamental  reference 
plane  (the  xy-plane),  a  direction  in  that  plane  (the  *-axis),  and  the  positive  (or 
north)  side  of  the  plane.  Other  fundamental  planes  or  directions  may  be  used;  for 
example,  the  direction  of  the  z-axis  (i.e.,  the  normal  to,  or  pole  of,  the  ry-plane) 
may  be  specified,  or  the  jt-axis  may  be  specified  as  the  line  of  intersection,  or  node, 
of  two  reference  planes. 

The  vector  r  from  the  origin  to  the  object  may  be  represented  by  rectangular 
coordinates  {x,y,z)\  that  is,  by  the  projections  of  the  distance  r  on  the  three  axes. 
It  can  also  be  represented  by  spherical  coordinates,  in  which  direction  is  usually 
specified  by  the  longitudinal  angle  (A)  in  the  xy-reference  plane  and  the  latitudinal 
angle  (/?)  from  the  reference  plane  (see  Figure  1.31.1).  Less  frequently  the  polar 
angle  (90° -0),  or  complement  of  the  latitudinal  angle,  is  used;  the  prefix  "co"  may 
be  added  to  the  name  in  such  cases.  The  longitudinal  and  latitudinal  angles  are 
given  different  names  and  symbols  in  different  coordinate  frames.  If  the  longitudinal 
angle  is  measured  in  the  negative  (or  left-handed)  sense  with  respect  to  the  z-axis, 
the  prefix  "co"  may  be  used  to  indicate  the  complement  to  360°. 

The  geometric  transformations  of  coordinates  between  different  coordinate  sys- 
tems, and  the  allowances  for  physical  effects,  may  be  carried  out  using  the  tech- 
niques of  spherical  trigonometry  or  those  of  vector  and  matrix  algebra.  Generally, 
matrices  would  be  the  preferred  method,  but  some  transformations  are  easier  to 


10 


EXPLANATORY  SUPPLEMENT 


Z 


X 


Figure  1.31.1 

Representation  of  the  vector  r  in  rectangular  coordinates 

explain  using  spherical  trigonometry.  The  concept  of  the  celestial  sphere  will  be 
used  for  purposes  of  explanation,  with  the  arcs  on  the  sphere  representing  angles 
between  directions.  The  center  of  the  sphere  can  be  located  in  many  different  places, 
but  in  most  cases  the  sphere  will  be  used  to  illustrate  a  particular  reference  frame 
with  a  specific  origin.  It  must  be  remembered  that  when  an  object  represented 
on  the  sphere  is  changing  radial  distances  from  the  center,  these  changes  must  be 
incorporated  into  the  mathematics  of  the  computation. 

1.311  Coordinate  Designations  Many  different  coordinate  systems  are  used  to 
specify  the  positions  of  celestial  objects.  Each  system  depends  on  the  choice  of 
coordinate  frame  and  on  the  way  of  specifying  coordinates  with  respect  to  the 
frame.  The  term  celestial  coordinate  frame  is  used  here  for  a  coordinate  frame  that 
does  not  rotate  with  the  Earth  (or  other  planet),  so  that  the  coordinates  of  stars, 
for  example,  change  only  slowly  with  time.  (Frames  that  rotate  with  the  Earth  are 
discussed  in  Section  1.33.) 

The  designations  used  to  indicate  the  principal  origins  of  celestial  coordinate 
frames  are  as  follows: 

(1)  topocentric:  viewed  or  measured  from  the  surface  of  the  Earth. 

(2)  geocentric:  viewed  or  measured  from  the  center  of  the  Earth. 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


11 


(3)  selenocentric:  viewed  or  measured  from  the  center  of  the  Moon. 

(4)  planetocentric:  viewed  or  measured  from  the  center  of  a  planet  (with  cor- 
responding designations  for  individual  planets). 

(5)  heliocentric:  viewed  or  measured  from  the  center  of  the  Sun. 

(6)  barycentric:  viewed  or  measured  from  the  center  of  the  mass  of  the  solar 
system  (or  of  the  Suti  and  a  specified  subset  of  planets). 

The  principal  celestial  reference  planes  through  the  appropriate  origins  are  as 
follows: 

(1)  horizon:  the  plane  that  is  normal  to  the  local  vertical  (or  apparent  direction 
of  gravity)  and  passes  through  the  observer. 

(2)  local  meridian:  the  plane  that  contains  the  local  vertical  and  the  direction 
of  the  axis  of  rotation  of  the  Earth. 

(3)  celestial  equator:  the  plane  that  is  normal  to  the  axis  of  rotation  of  the 
Earth  and  passes  through  the  Earth's  center. 

(4)  ecliptic:  the  mean  plane  (i.e.,  ignoring  periodic  perturbations)  of  the  orbit 
of  the  Earth  around  the  Sun. 

(5)  planet's  meridian:  a  plane  that  contains  the  axis  of  rotation  of  the  planet 
and  passes  through  the  observer. 

(6)  planet's  equator:  the  plane  that  is  normal  to  the  axis  of  rotation  of  the 
planet  and  passes  through  the  planet's  center. 

(7)  orbital  plane:  the  plane  of  the  orbit  of  a  body  around  another  (e.g.,  of  a 
planet  around  the  Sun  or  barycenter). 

(8)  invariable  plane  or  Laplacian  plane:  the  plane  that  is  normal  to  the  axis  of 
angular  momentum  of  a  system  and  passes  through  its  center. 

(9)  galactic  equator:  the  plane  through  the  central  line  of  the  local  Galaxy 
(Milky  Way). 


1 .32   Celestial  Coordinate  Systems 

1.321  Equatorial  and  Ecliptic  Frames  The  line  of  intersection  of  the  mean  plane 
of  the  equator  and  the  ecliptic  defines  the  direction  of  the  equinox  (T).  Using 
this  direction  as  the  origin,  the  right  ascension  (a)  is  measured  in  the  plane  of 
the  equator  and  celestial  (or  ecliptic)  longitude  (A)  is  measured  in  the  plane  of  the 
ecliptic  (see  Figure  1.321.1).  Right  ascension,  like  hour  angle,  is  usually  expressed  in 
time  measure  from  0h  to  24",  and  both  right  ascension  and  longitude  are  measured 
in  the  positive  (or  right-handed)  sense.  The  complement  of  right  ascension  with 
respect  to  24h  is  known  as  sidereal  hour  angle  (SHA);  in  navigational  publications 
it  is  usually  expressed  in  degrees.  Declination  is  measured  from  the  equatorial  plane, 
positive  to  the  north,  from  0°  to  90°.  Celestial  latitude  is  measured  from  the  ecliptic 
plane,  positive  to  the  North,  from  0°  to  90°. 


12 


EXPLANATORY  SUPPLEMENT 

zi    Pole  of  plane  0Xl,yi ,  equator 


Pole  of  ecliptic 


Equator  of  Zi 


Ecliptic 


Figure  1.321.1 

Equatorial  and  ecliptic  reference  planes 


The  equinox  is  at  the  ascending  node  of  the  ecliptic  on  the  equator;  this  is 
the  direction  at  which  the  Sun,  in  its  annual  apparent  path  around  the  Earth, 
crosses  the  equator  from  south  to  north.  It  is  also  referred  to  as  "the  first  point 
of  Aries,"  and  it  is  the  vernal  (spring)  equinox  for  the  Northern  Hemisphere.  (See 
Figure  1.321.1.)  The  inclination  of  the  plane  of  the  ecliptic  to  the  plane  of  the 
equator  is  known  as  the  obliquity  of  the  ecliptic  (e). 

The  equator  and  ecliptic  are  moving  because  of  the  effects  of  perturbing  forces 
on  the  rotation  and  motion  of  the  Earth.  Hence,  the  equinox  and  obliquity  change 
as  a  function  of  time;  so  these  celestial  coordinate  frames  must  be  carefully  defined 
in  such  a  way  that  they  can  be  related  to  a  standard  frame  that  may  be  regarded 
as  being  fixed  in  space. 


1.322  Precession  and  Nutation  The  celestial  pole,  which  is  in  the  direction  of  the 
axis  of  rotation  of  the  Earth,  is  not  fixed  in  space,  but  changes  because  of  gravita- 
tional forces,  mainly  from  the  Moon  and  Sun,  that  act  on  the  nonspherical  distri- 
bution of  matter  within  the  Earth.  The  quasi-conical  motion  of  the  mean  celestial 
pole  around  the  pole  of  the  ecliptic  is  known  as  lunisolar  precession.  The  much 
smaller  motion  of  the  actual,  or  true,  celestial  pole  around  the  mean  pole  is  known 
as  nutation.  The  period  of  the  precessionai  motion  is  about  26,000  years;  the  prin- 
cipal period  of  the  nutation  is  18.6  years.  The  motions  of  the  celestial  pole  are 
accompanied  by  corresponding  motions  of  the  celestial  equator  and  of  the  equinox. 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  1  3 

The  motion  of  the  equinox  due  to  precession  gives  rise  to  an  almost  steady 
increase  in  the  celestial  longitudes  of  all  stars  at  the  rate  of  about  50"  per  year,  but 
the  latitudes  are  hardly  affected.  The  corresponding  changes  in  right  ascensions  and 
declinations  depend  on  the  position  of  the  stars  in  the  sky.  The  nutational  motion 
has  an  amplitude  of  about  9";  it  is  usually  represented  as  the  sum  of  two  components, 
one  in  longitude  and  one  in  obliquity.  There  is  also  a  small  rotation  of  the  plane 
of  the  ecliptic  that  gives  a  precession  of  the  equinox  of  about  12™  per  century  and 
a  decrease  of  the  obliquity  of  the  ecliptic  of  about  47"  per  century;  this  is  known 
as  planetary  precession  since  it  is  due  to  the  effects  of  planetary  perturbations  on 
the  motions  of  the  Earth  and  Moon.  These  motions  of  the  equatorial  and  ecliptic 
coordinate  frames  can  be  modeled;  however,  some  parameters  have  to  be  determined 
from  observations,  since,  for  example,  the  internal  structure  of  the  Earth  is  not 
known  well  enough. 

In  principle  it  is  possible  to  obtain  a  standard  celestial  coordinate  frame  that  is 
fixed  in  space  by  using  the  frame  that  is  appropriate  to  an  arbitrarily  chosen  instant 
of  time,  which  is  known  as  the  standard  epoch.  The  positions  of  the  equator  and 
equinox  for  such  a  standard  epoch  cannot  be  observed  directly,  but  must  be  specified 
by  adopting  a  catalog  of  the  positions  and  motions  of  a  set  of  stars  or  other  celestial 
objects  that  act  as  reference  points  in  the  sky.  The  standard  epoch  is  now  J2000.0, 
although  the  epoch  B1950.0  has  been  used  for  much  of  this  century.  There  can  be 
different  standard  catalogs;  for  example,  one  is  based  on  the  positions  of  very  distant, 
quasars  that  have  been  measured  by  the  techniques  of  Very-Long  Baseline  Radio 
Interferometry  (VLBI);  another  is  the  FK5  catalog  of  the  positions  and  motions 
of  a  much  larger  number  of  bright  stars.  The  relative  orientation  of  these  different 
frames  is  determined  from  observations.  Standard  expressions  for  precession  and 
nutation  are  used  to  connect  positions  for  the  standard  frames  (which  are  for  the 
standard  epoch  of  J2000.0)  with  those  for  the  mean  and  true  frames  of  other  dates. 

A  statement  of  the  celestial  coordinates  of  a  star  or  other  celestial  object  must 
always  specify  precisely  the  coordinate  frame  to  which  they  refer.  It  must  also  be 
recognized  that  the  coordinates  that  represent  the  position  (direction)  of  a  celestial 
object  depend  on  the  position  and  motion  of  the  observer  as  well  as  on  the  origin 
and  orientation  of  the  coordinate  frame  to  which  they  are  referred. 

1 .33   Terrestrial  Coordinate  Systems 

For  astronomical  purposes  it  is  necessary  to  be  able  to  specify  the  position  of  an 
observer,  or  other  object,  at  or  near  the  surface  of  the  Earth  in  a  geocentric  coor- 
dinate frame  that  rotates  with  the  Earth  and  that  may  be  related  to  the  geocentric 
celestial  frame  used  for  specifying  the  positions  of  the  "fixed"  stars.  It  is  also  nec- 
essary to  set  up  topocentric  coordinate  frames  that  may  be  regarded  as  fixed  with 
respect  to  the  surface  of  the  Earth  and  that  may  be  used  in  the  measurement  of  the 


-|4  EXPLANATORY  SUPPLEMENT 

positions  of  celestial  objects.  The  direction  of  the  axis  of  rotation  of  the  Earth  pro- 
vides an  observable  reference  axis  for  both  geocentric  and  topocentric  frames,  and 
the  direction  of  the  vertical  (or  apparent  direction  of  gravity)  provides  an  additional 
observable  reference  axis  for  topocentric  frames. 

1.331  Horizon  Reference  The  lines  of  intersection  of  the  plane  of  the  meridian 
with  the  planes  of  the  horizon  and  equator  define  the  directions  from  which  azimuth 
(A)  and  local  hour  angle  (h)  are  measured.  Azimuth  is  measured  in  the  plane  of 
the  horizon  from  the  north,  increasing  in  positive  value  toward  the  east.  Local  hour 
angle  is  measured  in  units  of  time:  1  hour  for  each  15°  positive  to  the  west  with 
respect  to  the  local  meridian. 

The  latitudinal  angles  with  respect  to  the  horizon  and  equator  are  known  as 
altitude  (a)  and  declination  (6).  Altitude  is  measured  positively  toward  the  zenith; 
in  astronomy  the  zenith  distance  (z  =  90°  —  a)  is  more  generally  used.  Declination 
(6)  is  measured  from  the  equator,  positive  toward  the  north  pole  of  rotation.  The 
zenith  distance  of  the  north  pole,  which  is  the  same  as  the  codeclination  of  the  local 
vertical  (or  zenith),  is  equal  to  the  geographic  colatitude  of  the  point  of  observation. 
This  relationship  is  the  basis  of  the  astronomical  methods  for  the  determination  of 
geographic  latitude. 

1.332  Shape  of  the  Earth  For  some  astronomical  purposes  the  Earth  may  be  re- 
garded as  a  sphere,  but  often  one  must  treat  the  Earth  as  an  oblate  ellipsoid  of 
revolution,  or  spheroid,  and  may  need  to  take  into  account  other  departures  from 
sphericity.  In  particular,  the  height  above  mean  sea  level  of  a  point  on  the  Earth  is 
measured  from  an  irregular  surface  that  is  known  as  the  geoid  (see  Section  1.336). 
Such  heights  satisfy  the  condition  that  water  flows  downhill  under  gravity.  There  are 
several  systems  of  terrestrial  coordinates;  so  any  set  of  precise  coordinates  should 
be  accompanied  by  a  precise  description  of  their  basis. 

The  oblateness  of  the  Earth  is  a  consequence  of  the  rotation  of  the  Earth — the 
axis  of  rotation  coincides  on  average  with  the  axis  of  principal  moment  of  inertia, 
which  is  usually  referred  to  as  the  axis  of  figure.  The  axis  of  rotation  and  the  axis 
of  figure  do  not  coincide  exactly,  but  the  axis  of  rotation  moves  slowly  in  the  Earth 
around  the  axis  of  figure  in  a  quasi-periodic  motion  with  a  maximum  amplitude  of 
about  0['3  (or  about  9m  on  the  surface  of  the  Earth).  This  is  referred  to  as  polar 
motion.  The  equator  of  the  Earth  passes  through  the  center  of  mass  of  the  Earth. 

1.333  Geocentric  Coordinates  Geocentric  coordinates  are  coordinates  that  refer 
to  a  coordinate  frame  whose  origin  is  at  the  center  of  mass  of  the  Earth  and  whose 
fundamental  planes  are  the  equator  and  an  (arbitrary)  prime  meridian  through 
"Greenwich"  (see  Figure  1.333.1).  This  frame  defines  a  system  of  rectangular  coor- 
dinates (x,y,z)  or  of  spherical  coordinates,  (longitude  (A'),  latitude  (ip'%  and  radial 
distance  (p)).  Longitude  is  measured  positively  to  the  east  and  usually  designated 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


15 


z 

North  Pole 


Equator 


Figure  1.333.1 

Geocentric  and  geodetic  coordinates 


from  ±  180°.  Longitude  may  be  expressed  in  time  units  from  0h  to  24h  for  some 
applications.  Latitude  is  measured  from  the  equator  (0°)  to  ±  90°,  positively  to  the 
north. 

The  Earth  is  not  a  rigid  body,  but  is  subject  to  secular  and  periodic  changes 
in  shape  and  in  the  distribution  of  mass.  The  crust  of  the  Earth  may  be  consid- 
ered to  consist  of  plates  that  move  slowly  over  the  mantle  and  that  are  subject  to 
deformation.  In  these  circumstances,  the  coordinate  frame  is  realized  by  the  adop- 
tion of  values  for  the  positions  and  motions  of  a  set  of  primary  reference  points 
on  the  surface  of  the  Earth.  These  values  are  chosen  in  an  endeavor  to  satisfy  cer- 
tain conditions;  for  example,  so  that  the  prime  meridian  nominally  passes  through 
Greenwich  and  so  that  there  is  no  net  rotation  of  the  primary  points  \vith  respect  to 
the  frame.  In  practice,  different  techniques  of  observation  and  analysis  give  rise  to 
reference  frames  that  differ  from  each  other,  and  from  the  standard  frame,  in  origin, 
orientation,  and  scale.  Moreover,  the  z-axis  of  the  standard  geocentric  terrestrial 
frame  is  not  aligned  with  the  Earth's  present  axis  of  figure,  since  it  was  chosen  to 
give  continuity  with  the  axis  represented  by  the  adopted  coordinates  of  the  original 
set  of  monitoring  observatories.  This  axis  corresponds  to  the  Conventional  Inter- 
national Origin  of  the  coordinates  of  the  pole,  and  so  may  be  referred  to  as  the 
conventional  pole. 


-|  g  EXPLANATORY  SUPPLEMENT 

1.334  Geodetic  Coordinates  Geodetic  coordinates  are  coordinates  (longitude,  lat- 
itude, and  height)  that  refer  to  an  adopted  spheroid  whose  equatorial  radius  and 
flattening  (or  equivalent  parameter)  must  be  specified.  Geodetic  longitude  (A)  is 
defined  in  the  same  way  as  geocentric  longitude  (A'),  and  these  two  coordinates 
are  equal  to  each  other  apart  from  any  error  in  the  adopted  origin  of  geodetic 
longitude.  Geodetic  latitude  (tp)  is  equal  to  the  inclination  to  the  equatorial  plane 
of  the  normal  to  the  spheroid  (see  Figure  1.333.1).  Geodetic  latitude  may  differ 
from  geocentric  latitude  (<p')  by  up  to  10'  in  mid-latitudes.  Geodetic  height  (h)  is 
the  distance  above  the  spheroid  measured  along  the  normal  to  the  spheroid.  (See 
Section  4.21.) 

Geodetic  coordinates  may  be  formally  referred  to  an  internationally  adopted 
spheroid  whose  origin  and  fundamental  planes  are  those  specified  for  geocentric 
coordinates.  Generally,  however,  they  are  referred  to  a  spheroid  that  has  been  fitted 
to  the  geoid  over  a  particular  region.  The  center  of  such  a  spheroid  may  differ 
significantly  from  the  center  of  mass  of  the  Earth,  and  the  fundamental  planes 
may  not  be  parallel  to  those  of  the  international  spheroid.  The  orientation  of  the 
reference  frame  of  a  regional  spheroid  is  specified  by  the  adopted  coordinates  of 
the  origin  point,  which  is  usually  a  geodetic  reference  station  near  the  center  of 
the  region  concerned.  Geodetic  coordinates  may  also  be  referred  to  globally  defined 
spheroids  whose  origins  and  fundamental  planes  may  be  found  to  differ  from  the 
ideal  specification.  Usually  the  term  datum  is  used  in  geodesy  for  regional  or  global 
reference  frames  such  as  the  ones  given  in  Section  4.24  for  the  international  spheroid 
and  also  for  certain  global  and  regional  spheroids.  In  certain  cases  up-to-date  values 
of  these  parameters  are  given  in  The  Astronomical  Almanac. 

1.335  Geographic  Coordinates  The  term  geographic  coordinates  is  used  for  terres- 
trial longitude  and  latitude  when  these  are  determined  by  astronomical  observations 
with  respect  to  the  celestial  pole  and  the  local  meridian  through  the  local  vertical; 
and  for  height  above  the  geoid,  commonly  referred  to  as  height  above  mean  sea 
level.  The  terms  astronomical  coordinates  and  terrestrial  coordinates  are  also  used 
for  such  coordinates. 

The  geographic  longitude  of  a  point  may  be  defined  as  the  angle  between  the 
plane  of  the  astronomical  meridian  through  the  point  and  the  plane  of  the  prime 
meridian  through  Greenwich.  The  astronomical  meridian  is  the  plane  that  contains 
the  direction  of  the  local  vertical  and  the  direction  of  the  line  through  the  point  that 
is  parallel  to  the  axis  of  rotation  of  the  Earth.  The  local  vertical  is  affected  by  local 
gravity  anomalies  and  by  the  varying  gravity  fields  of  the  Sun,  Moon,  and  oceans. 
Therefore,  the  astronomical  meridian  is  not  precisely  the  same  as  the  geodetic 
meridian  that  passes  through  the  point  and  the  actual  axis  of  figure  through  the 
center  of  the  Earth.  Consequently,  the  geographic  and  geodetic  longitudes  of  a  point 
differ  slightly.  Geographic  longitude  is  equal  to  the  difference  between  (observed) 
local  sidereal  time  and  Greenwich  sidereal  time  at  any  instant. 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  1 J 

Geographic  latitude  is  also  defined  in  terms  of  the  local  vertical  and  the  axis 
of  rotation,  and  so  is  not  equal  to  the  geodetic  latitude.  The  inclination  of  the 
local  vertical  to  the  normal  to  the  reference  spheroid  is  known  as  the  deflection 
of  the  vertical.  The  corresponding  difference  between  the  geographic  and  geodetic 
coordinates  may  be  as  much  as  1'  (that  is  up  to  4s  in  time- measure).  The  motion  of 
the  axis  of  rotation  within  the  Earth  causes  the  values  of  geographic  longitude  and 
latitude  to  vary  by  up  to  about  0'.'3  over  a  period  of  a  few  years.  The  daily  tidal 
variations  in  the  direction  of  the  vertical  may  reach  about  0"01. 

1.336  Height  and  Geoid  The  height  (or  altitude)  of  a  point  on  (or  near)  the  sur- 
face of  the  Earth  depends  on  the  reference  surface  to  which  it  is  referred.  Geode- 
tic heights  are  measured  with  respect  to  a  specified  geodetic  datum  (or  reference 
spheroid),  but  the  more  commonly  used  geographic  heights  are  measured  with  re- 
spect to  a  surface  that  is  known  as  the  geoid.  The  geoid  is  a  particular  equipotential 
surface  in  the  gravity  field  of  the  Earth  and  is  commonly  referred  to  as  the  mean- 
sea-level  surface.  The  geoid  is  an  irregular  surface  that  may  lie  above  or  below 
the  international-reference  spheroid  by  as  much  as  100  m;  this  difference  is  known 
as  the  "undulation  of  the  geoid"  and  should  be  taken  into  account  in  the  precise 
derivation  of  geocentric  coordinates  when  the  height  above  mean  sea  level  is  given. 
For  very  precise  studies,  it  is  also  necessary  to  take  into  account  the  variations  in 
height  due  to  Earth  tides  and  ocean  loading  (see  Section  4.3). 

1.337  Topocentric  Coordinate  Systems  There  are  two  main  topocentric  coordi- 
nate frames.  One  is  based  on  the  direction  of  the  local  vertical,  which  defines  the 
plane  of  the  horizon;  the  other  is  based  on  the  direction  of  the  Earth's  axis  of  ro- 
tation, which  defines  the  plane  of  the  celestial  equator.  The  local  meridian,  which 
contains  the  direction  of  the  local  vertical  and  the  direction  of  the  axis  of  rotation, 
is  common  to  both  frames. 

The  angular  coordinates  in  the  topocentric  coordinate  frame  of  the  horizon 
and  local  meridian  are  known  as  azimuth  and  altitude.  Azimuth  (A)  is  measured 
from  0°  to  360°  from  north  in  the  direction  of  east;  that  is,  in  the  negative  sense 
with  respect  to  the  direction  of  the  zenith.  (In  some  circumstances  azimuth  may  be 
measured  from  the  south,  and  so  the  convention  that  is  used  should  be  stated  to 
avoid  ambiguity.)  Altitude  (a)  is  measured  positively  from  the  horizon  toward  the 
zenith;  however,  in  astronomy,  the  zenith  distance  (z  =  90°  —  a)  is  more  commonly 
used.  Both  the  altitude  and  the  azimuth  of  any  celestial  object  change  rapidly  as 
the  Earth  rotates,  and  therefore,  for  many  purposes  it  is  more  convenient  to  use  the 
topocentric  frame  of  the  celestial  equator  and  the  local  meridian.  The  direction  of 
the  north  celestial  pole  is  parallel  to  the  Earth's  axis  of  rotation,  and  the  altitude 
of  the  pole  is  equal  to  the  geographic  latitude  of  the  point  of  observation.  This  is 
illustrated  in  Figure  1.337.1,  which  shows  the  Earth  as  a  sphere. 


18 


EXPLANATORY  SUPPLEMENT 


Plane  of  Earth's  equator 


Figure  1.337.1 

Relation  between  geographic  latitude  and  the  altitude  of  the  celestial  pole 


In  this  topocentric  equatorial  frame,  the  angular  coordinates  are  known  as  local 
hour  angle  (LHA,  or  h)  and  declination  (6).  LHA  is  measured  from  0°  to  360° ,  or 
from  0h  to  24h,  from  south  in  the  direction  of  west  (i.e.,  in  the  negative  sense  with 
respect  to  the  direction  of  the  north  celestial  pole),  and  the  LHA  of  a  celestial  object 
increases  by  about  15°,  or  lh,  for  every  hour  of  time.  Declination  is  measured  from 
the  equator  to  the  celestial  pole,  positive  toward  the  north.  Codeclination,  measured 
from  the  pole  toward  the  equator,  is  sometimes  used  instead  of  declination.  The 
declination  of  a  celestial  object  is  not  changed  by  the  diurnal  rotation  of  the  Earth. 

1 ,34  The  Rotation  of  the  Earth 

The  connection  between  a  local  coordinate  frame  (defined  with  respect  to  the  Earth 
at  the  point  of  observation)  and  a  celestial  coordinate  frame  is  complicated  by 
three  aspects  of  the  rotation  of  the  Earth:  the  precession  and  nutation  of  the  axis 
of  rotation  (Section  1,322),  the  motion  of  the  pole  of  rotation  within  the  Earth 
(Section  1.341),  and  the  variability  of  the  rate  of  rotation  (Section  1.342). 

1.341  Polar  Motion  Measurements  of  the  zenith  distances  of  the  celestial  pole  of 
rotation  at  different  places  and  times  show  that  the  Earth's  axis  of  rotation  is  not 
fixed  within  the  Earth,  but  moves  around  the  axis  of  maximum  moment  of  inertia. 
This  phenomenon  is  known  as  polar  motion.  Since  it  cannot  be  predicted  accurately 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  -|  9 

in  advance,  the  position  of  the  pole  is  determined  from  regular  observations  as  an 
international  service.  In  a  celestial  coordinate  system,  the  axis  of  maximum  moment 
of  inertia  moves  around  the  axis  of  rotation  in  a  complex  motion  in  which  an  annual 
component  and  a  14-month  (Chandler)  component  create  beats.  The  amplitude  of 
the  quasi-circular  motion  varies  between  0"05  and  0"25  in  a  six-year  cycle. 

1.342  Length  of  Day  The  variations  in  the  Earth's  rate  of  rotation  are,  at  present, 
unpredictable  and  are  due  to  several  different  causes.  There  is  a  long-term  slowing 
down  of  the  rate  of  rotation  that  appears  to  be  due  largely  to  the  effect  of  tidal 
friction.  There  are  irregular  changes  with  characteristic  periods  of  a  few  years  that 
appear  to  be  due  to  an  interchange  of  angular  momentum  between  the  mantle  and 
the  core  of  the  Earth.  There  are  also  seasonal  and  short-period  irregular  changes 
that  appear  to  be  due  largely  to  exchanges  of  angular  momentum  between  the 
solid  Earth  and  the  atmosphere.  The  total  effect  on  the  orientation  of  the  Earth  in 
space  is  determined  from  observations  by  an  international  monitoring  service  that 
provides  future  predictions  based  on  the  observations. 

These  variations  are  usually  represented  by  the  corresponding  changes  in  the 
length  of  the  (universal)  day  (with  respect  to  a  day  of  86400  SI  seconds)  and 
by  the  accumulated  difference  between  UT  and  TAI  (or  ET  before  1955).  The 
latter  difference  in  time  may  be  expressed  as  a  corresponding  difference  in  angular 
orientation  of  the  Earth.  Table  1.342.1  shows  the  orders  of  magnitude  of  the  different 
variations. 

The  accumulated  effect  of  the  changes  in  the  rate  of  rotation  can  be  seen  most 
clearly  in  the  geographic  longitudes  and  times  at  which  certain  phenomena,  such 
as  eclipses  of  the  Sun,  were  observed  in  early  history.  The  accumulated  effect  of 
the  changes  in  the  rate  of  rotation  has  amounted  to  two  hours  over  the  last  two- 
thousand  years.  This  was  a  source  of  much  confusion  when  the  rotation  of  the 
Earth  provided  the  standard  timescale  for  all  purposes.  It  is  now  recognized  that 
sidereal  time  and  Universal  Time  are  best  regarded  as  measures  of  angles  that  serve 
to  specify  the  orientation  of  terrestrial  coordinate  systems  with  respect  to  celestial 


Table  1.342.1 

Variations  in  the  Earth's  Rate  of  Rotation 


Characteristic 

Change  in 

Difference 

Difference 

Time 

Length  of  Day 

in  Time 

in  Orientation 

a  few  days 

0. 1  ms 

1  ms 

o:'oi 

100  days 

1  ms 

0.2s 

3" 

a  few  years 

3ms 

10s 

3' 

20  EXPLANATORY  SUPPLEMENT 

coordinate  systems.  They  must  be  determined  from  observations,  although  man- 
made  clocks  can  be  used  for  interpolation  and  extrapolation. 


1 .35   The  Connections  between  Terrestrial  and  Celestial  Coordinates 

In  studies  of  the  distribution  and  motion  of  celestial  bodies  it  is  necessary  to  have 
procedures  for  the  transformation,  or  reduction,  of  "observed"  topocentric  coor- 
dinates, which  are  referred  to  a  terrestrial  frame  that  rotates  with  the  Earth,  to 
(or  from)  "reduced"  barycentric  coordinates,  which  are  referred  to  a  celestial  frame 
that  is  fixed  in  space.  The  generally  adopted  procedure  uses  an  intermediate  system 
of  geocentric  coordinates,  which  are  referred  to  a  celestial  equatorial  frame  of  date 
that  is  defined  by  the  current  directions  of  the  Earth's  axis  of  rotation  and  of  the 
equinox.  The  principal  stages  of  the  full  reduction  are  as  follows: 

Stage  1:  Rotation  of  the  terrestrial  frame  from  the  horizon  to  the  equator  and 
from  the  local  meridian  to  the  prime  meridian. 

Stage  2:  Translation  of  the  origin  of  the  terrestrial  frame  from  the  observer  to  the 
geocenter — a  change  from  UTC  to  TDT  may  be  required. 

Stage  3:  Rotation  of  the  terrestrial  frame  for  polar  motion;  i.e.,  from  the  conven- 
tional pole  to  the  true  celestial  pole  (or  celestial  ephemeris  pole). 

Stage  4:  Rotation  of  the  terrestrial  frame  around  the  true  pole  from  the  Green- 
wich meridian  to  the  celestial  frame  whose  prime  meridian  passes  through  the  true 
equinox.  (The  angle  of  rotation  varies  rapidly  as  the  Earth  rotates,  and  is  known 
as  the  Greenwich  apparent  sidereal  time.) 

Stage  5:  Rotation  of  the  celestial  frame  for  nutation  from  the  true  pole  and  true 
equinox  to  the  mean  pole  and  mean  equinox  of  date. 

Stage  6:  Rotation  of  the  celestial  frame  for  precession  from  the  mean  equator  and 
equinox  of  date  to  the  standard  (mean)  equator  and  equinox  of  J2000.0. 

Stage  7:  Translation  of  the  origin  from  the  geocenter  to  the  barycenter  of  the  Solar 
System — a  change  from  TDT  to  TDB  may  be  required. 

Stage  1  requires  a  knowledge  of  the  geographic  longitude,  latitude,  and  height 
of  the  place  of  observation.  If  appropriate,  the  effect  of  the  tides  on  the  deflection 
of  the  vertical  and  on  the  height  may  have  to  be  taken  into  account. 

Stage  2  requires  a  knowledge  of  the  geodetic  longitude,  latitude,  and  height  for 
reducing  the  coordinates  of  very  close  objects.  For  distant  objects,  such  as  stars, 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  21 

the  translations  of  the  origin  may  be  treated  as  small  rotations  corresponding  to 
small  parallactic  shifts  in  direction. 

The  standard  values  of  the  coordinates  of  the  pole  that  are  required  in  Stage  3 
are  published  in  arrears;  "quick-look"  and  predicted  values  are  also  made  available. 
Indicative  values  are  tabulated  at  a  wide  interval  in  The  Astronomical  Almanac  (p. 
K10). 

For  Stage  4,  the  required  value  of  the  Greenwich  sidereal  angle  at  the  time 
of  observation  may  be  calculated  in  three  steps  from  the  UTC  of  the  instant  of 
observation.  The  first  step  is  to  apply  the  difference  between  UT  and  UTC  values 
to  the  value  of  UTC.  Standard  values  are  published  in  arrears,  but  a  quick-look 
or  predicted  value  may  be  of  sufficient  accuracy.  The  value  of  UT  is  then  used 
to  compute  the  values  of  the  Greenwich  mean  sidereal  time  from  a  polynomial 
expression.  Finally,  the  equation  of  the  equinoxes  is  applied  to  give  the  Greenwich 
apparent  sidereal  time,  which  is  converted  to  angular  measure  to  give  the  required 
Greenwich  sidereal  angle. 

The  values  of  the  nutation  in  longitude  and  obliquity  that  are  required  in  Stage 
5  may  be  computed  from  harmonic  series  that  are  based  on  an  adopted  theory 
of  nutation.  In  some  circumstances  it  may  be  appropriate  to  apply  further  small 
corrections  obtained  from  the  analysis  of  recent  VLBI  observations. 

The  values  of  the  precession  that  are  required  in  Stage  6  may  be  computed 
from  adopted  expressions  for  the  angular  quantities  concerned.  Stages  5  and  6  may 
be  combined  in  a  single  rotation  matrix;  daily  values  of  the  matrix  are  published 
in  The  Astronomical  Almanac  (pp.  B45-B59). 

The  rectangular  coordinates  of  the  geocenter  with  respect  to  the  barycenter  may 
be  obtained  from  published  ephemerides,  such  as  that  printed  in  The  Astronomical 
Almanac  (pp.  B44-B58),  which  gives  both  position  and  velocity. 

1 .36   Effects  of  the  Position  and  Motion  of  the  Object  and  Observer 

1.361  Parallax  The  direction  in  which  an  object  is  seen  depends  on  the  position 
of  the  observer  as  well  as  on  the  position  of  the  object.  The  change  in  the  direction 
of  a  celestial  object  caused  by  a  change  in  the  position  of  the  observer  is  known  as 
a  parallactic  shift.  The  amount  of  change  in  direction  corresponding  to  a  standard 
linear  change  in  the  position  of  the  observer,  across  the  line  of  sight,  is  known  as  the 
parallax  of  the  object — it  is  an  inverse  measure  of  the  distance  of  the  object  from 
the  observer  (see  Figure  1.361.1).  For  objects  within  the  solar  system  the  standard 
linear  change  is  the  equatorial  radius  of  the  Earth.  For  the  stars  and  other  such 
distant  objects,  however,  the  standard  linear  change  is  the  astronomical  unit  of 
distance  (au)  or,  in  effect,  the  mean  radius  of  the  Earth's  orbit  around  the  Sun. 
The  basis  of  the  parallax  can  be  deduced  immediately  from  a  knowledge  of  the 
type  of  object.  The  parallax  of  an  object  in  the  solar  system  is  usually  referred  to 
as  a  horizontal  parallax,  since  the  actual  parallactic  shift  takes  this  value  when  the 


22 


EXPLANATORY  SUPPLEMENT 


Earth 


Earth 
orbit 


Earth 


Figure  1.361.1 

Parallax  of  an  objecl 


object  is  seen  on  the  horizon  (from  a  point  on  the  Earth's  equator).  The  parallax 
of  a  star  is  often  referred  to  as  an  annual  parallax,  since  the  parallactic  shift  varies 
with  a  period  of  one  year.  By  analogy,  a  horizontal  parallax  may  be  referred  to  as 
a  diurnal  parallax;  the  oblateness  of  the  Earth  must  be  taken  into  account  in  the 
precise  computation  of  the  parallactic  shift  of  the  Moon. 

Distances  within  the  solar  system  are  conveniently  and  precisely  expressed  in 
astronomical  units  and  may  be  expressed  in  meters  using  a  conversion  factor  based 
on  radar  measurements  to  planets.  Prior  to  1960,  this  conversion  factor  was  based 
on  determinations  of  the  solar  parallax,  i.e.,  of  the  equatorial  horizontal  parallax  of 
the  Sun  when  at  a  distance  of  1  AU. 

The  catalog  positions  of  stars  and  other  objects  outside  the  solar  system  are 
usually  referred  to  the  barycenter  of  the  solar  system.  The  correction  for  annual 
parallax  may  be  applied  with  sufficient  accuracy  for  many  purposes  by  assuming 
that  the  orbit  of  the  Earth  is  circular.  For  full  precision,  however,  it  is  usual  to 
express  the  correction  in  terms  of  the  barycentric  rectangular  coordinates  of  the 
Earth  that  are  tabulated  in  The  Astronomical  Almanac.  These  coordinates  are  also 
used  to  reduce  the  times  of  observation  of  such  phenomena  as  pulsar  emissions  to 
a  common  origin  at  the  barycenter  of  the  solar  system. 

1.362  Proper  Motion  and  Radial  Velocity  The  mot  ion  of  an  object  outside  the  so- 
lar system  is  usually  expressed  in  terms  of  its  proper  motion  and  radial  velocity. 
Proper  motion  is  expressed  in  terms  of  the  secular  rates  of  change  in  the  right  as- 
cension and  declination  with  respect  to  a  standard  coordinate  frame.  It  is  necessary 
to  know  the  distance  (or  parallax)  of  the  object  before  the  motion  transverse  to  the 
line  of  sight  can  be  expressed  in  linear  measure.  Radial  velocity  is  the  name  given  to 
the  motion  of  the  object  along  the  line  of  sight  and  is  derived  from  observations  of 
the  Doppler  shift  in  the  radiation  from  the  object.  It  is  usually  expressed  in  km/s. 
An  observational  value  must  be  corrected  for  the  rotational  motion  of  the  point  of 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


23 


observation  and  the  orbital  motion  of  the  Earth  around  the  barycenter.  When  the 
parallax  is  known,  the  proper  motion  and  radial  velocity  can  be  combined  to  form 
a  space-motion  vector  that  represents  the  motion  of  the  object  with  respect  to  the 
standard  reference  frame.  This  space-motion  vector  should  be  used  when  comput- 
ing apparent  positions  for  any  date  and  transforming  positions  from  one  standard 
epoch  to  another. 

1.363  Aberration  Because  the  velocity  of  light  is  finite,  the  direction  in  which  a 
moving  celestial  object  is  seen  by  a  moving  observer  (its  apparent  position)  is  not 
the  same  as  the  direction  of  the  straight  line  between  the  observer  and  the  object 
(its  geometric  position)  at  the  same  instant.  This  displacement  of  the  apparent 
position  from  the  geometric  position  may  be  attributed  in  part  to  the  motion  of 
the  object  and  in  part  to  the  orbital  and  rotational  motion  of  the  observer,  both 
of  these  motions  being  referred  to  a  standard  coordinate  frame.  The  former  part, 
which  is  independent  of  the  motion  of  the  observer,  is  referred  to  as  the  correction 
for  light-time;  the  latter  part,  which  is  independent  of  the  motion  or  distance  of  the 
object,  is  referred  to  as  stellar  aberration.  (For  stars  the  correction  for  light-time 
is  ignored.)  The  sum  of  the  two  parts  is  called  planetary  aberration  because  it  is 
applicable  to  planets  and  other  members  of  the  solar  system.  The  term  aberration 
is  used  in  this  supplement  to  include  the  effects  of  the  motions  of  both  object  and 
observer,  but  it  is  sometimes  used  elsewhere  for  the  effect  due  to  the  motion  of  the 
observer  alone.  For  precise  astrometry,  stellar  aberration  must  be  calculated  from 
the  formulas  of  the  special  theory  of  relativity,  but  for  most  classical  purposes  the 
theory  depending  on  only  the  first  power  in  vie,  where  v  is  the  velocity  of  the 
observer  and  c  is  the  velocity  of  light,  is  sufficient. 

The  motion  of  an  observer  on  the  Earth  is  the  resultant  of  the  Earth's  diur- 
nal rotation  and  the  Earth's  annual  orbital  motion  around  the  barycenter  of  the 
solar  system.  Stellar  aberration  is  therefore  regarded  as  the  sum  of  diurnal  aberra- 
tion and  annual  aberration,  for  which  the  maximum  effects  are  about  1'.'3  and  20", 
respectively. 

Annual  aberration  affects  all  objects  in  the  same  part  of  the  sky  in  a  similar 
way,  and  so  in  photographic  observations  of  stars  it  does  not  obscure  the  much 
smaller  effect  of  annual  parallax,  which  affects  the  apparent  positions  of  only  the 
nearby  stars. 

In  determining  precisely  the  differences  between  the  celestial  coordinates  of 
a  solar  system  object  and  a  fixed  star,  it  is  necessary  to  take  into  account  the 
differential  aberration  between  the  object  and  the  star.  In  constructing  an  ephemeris 
of  a  moving  object  that  is  to  be  compared  directly  with  the  catalog  positions  of 
stars  at  some  epoch,  it  is  necessary  to  take  into  account  the  correction  for  light-time 
but  not  stellar  aberration;  such  an  ephemeris  is  known  as  an  astrometric  ephemeris. 
An  ephemeris  in  which  aberration  is  fully  taken  into  account  along  with  precession, 
nutation,  and  light-bending  is  known  as  an  apparent  ephemeris. 


24  EXPLANATORY  SUPPLEMENT 

1.364  Deflection  of  Light  In  precise  computations  it  is  necessary  to  take  into  ac- 
count the  effect  of  the  gravitational  field  of  the  Sun  (or  other  massive  object)  on 
the  velocity  of  propagation  of  light.  The  effect  causes  a  bending  of  the  path,  so  that 
the  apparent  angular  distance  from  the  Sun  is  greater,  and  an  increase  in  the  travel 
time,  so  that  pulsed  radiation  is  retarded.  This  effect  resembles  refraction  in  the 
Earth's  atmosphere,  although  the  latter  effect  is  usually  much  greater. 

1.365  Refraction  Refraction  in  the  Earth's  atmosphere  affects  most  directional 
observations.  It  depends  largely  on  the  altitude  of  the  object  above  the  horizon, 
and  its  precise  value  depends  on  the  atmospheric  conditions  at  the  time.  Since  the 
effect  depends  on  the  position  of  the  object  with  respect  to  the  observer,  it  cannot 
be  included  in  ephemerides.  Nominal  allowances  are  made  for  refraction  in  the 
computations  of  the  times  of  rising  and  setting  phenomena,  for  which  the  effects  of 
refraction  are  greatest.  Refraction  increases  the  apparent  altitude  of  a  celestial  body 
and  increases  the  travel  times  of  laser  pulses.  Most  analytical  theories  and  tables 
of  refraction  assume  that  the  surfaces  of  equal  refractive  index  in  the  atmosphere 
are  concentric  and  that  it  is  sufficient  to  know  the  pressure,  temperature,  and 
relative  humidity  at  the  point  of  observation.  Significant  variation  from  such  models 
can  occur,  so  that  the  angular  refraction  may  not  be  exactly  zero  in  the  zenith. 
Measurements  of  azimuth  may  also  be  affected  by  refraction  in  the  horizontal  plane. 

The  refraction  of  radio  waves  depends  largely  on  the  properties  of  the  iono- 
sphere and  is  much  more  variable  than  refraction  for  light  waves.  Multiple-frequency 
measurements  may  be  used  to  determine  the  refraction  correction  for  radio  waves. 

1.4   ORBITAL  MOTIONS 

1 .41    Motion  in  Two-body  Systems 

1.411  Laws  of  Motion  Over  a  short  period  of  time  the  motion  of  a  planet  around 
the  Sun,  or  of  a  satellite  around  a  planet,  can  usually  be  treated  as  if  the  two 
objects  are  isolated  in  space  and  moving  around  each  other  in  accordance  with 
Newton's  laws  of  motion  and  gravitation  (i.e.,  Keplerian  or  two-body  motion).  The 
smaller,  or  secondary,  body  moves  around  the  larger,  or  primary,  body  in  an  orbit 
that  lies  in  a  plane  passing  through  the  primary.  The  orbit  is  in  the  shape  of  an 
ellipse  with  the  primary  at  a  focus.  Correspondingly,  the  larger  body  moves  in  a 
smaller  orbit  around  the  center  of  mass  of  the  pair.  The  orbits  of  the  major  planets 
and  most  satellites  are  almost  circular,  whereas  the  orbit  of  Comet  Halley,  for 
example,  is  extremely  elongated.  The  shape  of  an  ellipse  is  usually  characterized 
by  its  eccentricity,  e.  A  circle  is  a  limiting  case  as  e  approaches  zero,  and  e  tends 
to  unity  with  increasing  elongation.  Comets  may  also  move  in  parabolic  (e  -  1) 
or  hyperbolic  (e  >  1 )  orbits.  The  geometric  properties  of  these  conic  sections  are 
summarized  in  Figure  1.411.1. 


26 


EXPLANATORY  SUPPLEMENT 


Kepler  discovered  the  elliptical  character  of  the  orbit  of  Mars,  and  found  that 
the  speed  of  motion  of  Mars  was  such  that  the  line  joining  Mars  to  the  Sun  swept 
out  equal  areas  in  equal  times.  He  also  found  that  the  squares  of  the  periods  of 
revolution  (P)  of  the  planets  are  proportional  to  the  cubes  of  the  lengths  of  their 
semi-major  axes  (a).  Newton  was  the  first  to  demonstrate  that  these  properties 
were  consistent  with  the  existence  of  a  gravitational  force  of  attraction  between  the 
Sun  and  the  planet.  This  attraction  varies  inversely  as  the  square  of  the  distance 
(r)  between  the  two  bodies  and  directly  as  the  product  of  their  masses  (M  and  m). 
Newton  defined  the  mass  of  a  body  as  a  measure  of  the  amount  of  matter  in  the 
body,  and  the  momentum  of  a  body  as  the  product  of  its  mass  and  its  velocity. 
His  second  law  of  motion  states  that  the  rate  of  change  of  momentum  of  a  body  is 
proportional  to  the  force  acting  on  it  and  is  in  the  same  direction. 

If  the  Sun  and  a  planet  are  regarded  as  forming  an  isolated  system,  then  the 
system's  center  of  mass  can  be  regarded  as  being  at  rest  or  moving  at  a  uniform 
velocity  in  space.  This  point  can  be  treated  as  the  origin  of  a  set  of  nonrotating 
coordinate  axes,  which  are  then  used  to  form  an  inertial  coordinate  frame  to  which 
Newton's  laws  of  motion  and  gravitation  apply.  One  can  then  write  the  equations 
of  motion  of  the  Sun  and  of  the  planet  with  respect  to  the  frame.  The  equation  for 
the  motion  of  the  planet  relative  to  the  Sun  (i.e.,  treating  the  Sun  as  the  origin  of 
a  coordinate  frame  whose  axes  remain  parallel  to  those  of  the  inertial  frame)  may 
then  be  derived;  it  takes  the  simple  form 

G(M  +  m)r 

r=  j3  ,  (1.411-1) 

where  r  and  f  are  the  position  and  acceleration  of  the  planet  with  respect  to  the 
Sun  expressed  as  vectors,  with  Newton's  dot  notation  to  denote  differentiation 
with  respect  to  time,  and  where  G  is  the  constant  of  gravitation.  If  the  vector  r  has 
components  x,  y,  z  with  respect  to  the  coordinate  axes,  then  Equation  1.411-1  is 
equivalent  to  three  separate  equations  of  the  form 

G(M  +  m)x 

x=  .  (1.411-2) 

Many  of  the  basic  properties  of  motion  in  an  ellipse  may  be  derived  by  consider- 
ing the  case  when  the  orbit  lies  in  the  xy-plane  and  expressing  x  and  y  in  polar 
coordinates  r  and  9.  The  principal  results  are  given  in  Figure  1.411.1a. 

It  is  convenient  to  use  an  astronomical  system  of  units  in  which  the  unit  of 
mass  is  equal  to  the  mass  of  the  Sun,  and  the  unit  of  time  is  one  day.  When  this  is 
done,  Equation  1.411-1  is  written  as: 

k2{  \  +m)r 

r=  3  ,  (1.411-3) 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


27 


Figure  1.412.1 

Angular  orbital  elements 


where  k  is  known  as  the  Gaussian  constant  of  gravitation.  It  is  now  the  practice  to 
treat  the  value  of  k  as  a  fixed  constant  that  serves  to  define  the  astronomical  unit 
of  length  (au)  which  is  slightly  less  than  the  semi-major  axis  of  the  orbit  of  the 
Earth  around  the  Sun  (see  Chapter  15). 

1.412  Orbital  Parameters  Positions  of  a  body  moving  in  an  elliptical  orbit  can 
be  computed  from  a  set  of  six  orbital  parameters  (or  elements)  that  specify  the 
size,  shape,  and  orientation  of  the  orbit  in  space  and  the  position  of  the  body  at  a 
particular  instant  in  time  known  as  the  epoch.  Commonly  used  parameters  are: 

a  =  the  semi-major  axis  of  the  ellipse; 
e  =  the  eccentricity  of  the  ellipse; 

i  =  the  inclination  of  the  orbital  plane  to  the  reference  plane; 
£2  -  the  longitude  of  the  node  (N)  of  the  orbital  plane  on  the  reference  plane; 
w  =  the  argument  of  the  pericenter  (P)  (angle  from  N  to  P); 
T  =  the  epoch  at  which  the  body  is  at  the  pericenter. 

The  longitude  of  the  pericenter,  <D,  which  is  the  sum  of  £2  and  uj,  may  be  used 
instead  of  uj.  And  the  value  of  t  he  mean  anomaly,  M,  or  mean  longitude  (L  =  Gj+M) 
at  an  arbitrary  epoch  may  be  used  instead  of  T.  The  reference  plane  is  usually  the 
ecliptic,  and  the  epoch  for  which  the  reference  plane  is  specified  must  be  stated. 
These  angular  parameters  are  shown  in  Figure  1.412.1.  The  mean  daily  motion  of 


2g  EXPLANATORY  SUPPLEMENT 

a  planet  (n)  in  its  orbit  may  be  determined  from 

n=Y  =  —^-  (1.412-1) 

where  P  is  the  period  in  mean  solar  days  and  n  is  in  radians  per  day. 

The  elements  may  be  given  as  mean  elements  where  the  values  are  a  type  of 
average  value  over  some  period  of  time.  The  elements  may  be  given  as  osculating 
elements,  which  are  the  instantaneous  values  of  the  elements  or  the  elements  for 
the  elliptical  motion  that  the  body  would  follow  if  perturbing  effects  were  removed. 
Since  the  solar  system  bodies  are  in  well-behaved  orbits,  this  set  of  elements  may 
be  used.  In  cases  where  the  eccentricity  or  inclination  may  be  zero,  a  universal  set 
of  parameters  should  be  used  instead. 

The  orbital  parameters  can  be  used  to  compute  the  velocity  as  well  as  the 
position  of  the  body  in  its  orbit.  Conversely,  if  the  position  and  velocity  of  a  body 
are  known  at  a  given  instant,  it  is  possible  to  calculate  the  parameters  of  the 
elliptical  orbit.  When  a  new  minor  planet  is  discovered,  each  observation  gives  two 
coordinates  (usually,  right  ascension  and  declination).  At  least  three  observations, 
preferably  more,  are  required  to  determine  the  parameters  of  an  elliptical  orbit  that 
would  pass  through  the  observed  positions.  Gauss'  and  Laplace's  methods  can  be 
used  for  this  procedure  (Herget,  1948;  Danby,  1989). 


1 .42  Types  of  Perturbations 

It  is  only  for  applications  where  reduced  accuracy  is  required  that  two-body  motion 
is  adequate  for  the  representation  of  the  motion  of  a  planet  or  satellite.  For  other 
applications  a  number  of  perturbation  effects  must  be  included: 

(a)  The  attractions  of  other  planets  or  satellites  must  be  included  in  all  cases. 

(b)  The  nonsphericity  of  the  distribution  of  mass  in  a  primary  body  must  be 
included  in  calculating  the  motions  of  satellites. 

(c)  The  tidal  forces  that  arise  when  the  gravitational  attraction  departs  from 
simple  inverse  square  form  must  be  included  in  the  motions  of  satellites. 

(d)  The  nongravitational  forces,  or  reactive  forces,  must  be  included  when  com- 
puting the  orbit  of  a  comet. 

(e)  The  effect  of  atmospheric  drag  and  solar  wind  must  be  included  in  the 
computation  of  orbits  of  artificial  satellites. 

(f )  Radiation  pressure  must  be  included  in  the  motion  of  artificial  satellites  and 

in  the  motion  of  particles  in  the  rings  around  planets. 

1.421  Ephemerides  For  precise  calculations  of  the  motion  of  the  planets  and  the 
Moon,  the  equations  of  motion  must  include  the  relativistic  terms.  This  is  normally 
done  using  the  parameterized  post-Newtonian  (PPN)  version  of  the  equations.  The 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


29 


independent  variable,  time,  in  the  PPN  equation  for  the  solar  system  is  the  Barycen- 
tric  Dynamical  Time.  When  converting  the  barycentric  positions  of  the  planets  to 
geocentric  positions,  one  must  convert  the  time  according  to  the  relativistic  metric 
used  in  the  computation.  Similarly,  the  optical  observations  being  compared  to  the 
ephemerides  must  be  corrected  for  gravitational  light  bending,  and  radar  observa- 
tions must  be  corrected  for  the  appropriate  time  delay  involved.  With  the  exception 
of  the  Moon,  the  natural  satellite  ephemerides  do  not  require  the  inclusion  of  rela- 
tivistic effects  to  the  accuracies  currently  being  used. 

The  perturbation  effects  may  be  computed  either  by  numerical  integration  of 
the  motion  of  the  body  or  by  the  use  of  a  general  theory  that  provides  an  expression 
for  the  motion  of  the  body  as  a  function  of  time.  Currently,  it  is  not  possible  to 
achieve  the  accuracy  of  observations  by  means  of  a  general-theory  approach  for 
the  motion  of  the  planets  and  the  Moon.  On  the  other  hand,  for  rapidly  moving 
satellites,  such  as  the  Galilean  satellites,  it  is  not  possible  to  numerically  integrate 
those  bodies  over  an  extended  period  of  time  and  retain  the  necessary  accuracy 
required  for  observations. 

1.422  Numerical  Integration  Numerical  integration  is  the  most  accurate  method 
of  calculating  the  motion  of  bodies  in  the  solar  system,  particularly  the  Moon  and 
planets.  There  are  many  methods  of  numerical  integration.  Textbooks  on  celestial 
mechanics  describe  such  methods.  Usually,  Cowell's  method  is  used  with  an  equa- 
tion that  includes  the  PPN  relativistic  formulation.  The  initial  conditions  for  the 
numerical  integration  are  adjusted  to  fit  available  observational  data  and  a  sec- 
ond numerical  integration  is  performed  based  on  that  correction.  This  process  is 
repeated  until  the  numerical  integration  represents  the  observational  data  to  the 
required  accuracy. 

1.423  Analytical  Theories  As  an  alternative  to  numerical  integration,  an  analyt- 
ical theory,  usually  in  the  form  of  a  Fourier  series  or  Chebyshev  series,  can  be 
developed  to  represent  the  motion  of  the  bodies.  Historically,  this  was  the  method 
of  computation  for  the  planets  and  the  Moon,  and  the  technique  is  represented  by 
Newcomb's  theories  of  the  Sun,  Mercury,  and  Venus;  Hill's  theory  of  Jupiter  and 
Saturn;  and  Brown's  lunar  theory.  Today  this  method  is  used  only  for  planetary 
satellites,  where  sufficient  accuracy  can  be  achieved  by  this  method.  These  theories 
permit  determination  of  the  positions  of  the  bodies  for  any  time  within  the  period 
of  validity  for  the  theory.  Theories  of  the  planets  and  the  Moon  have  been  developed 
by  Bretagnon,  Simon,  Chapront,  and  Chapront-Touze,  but  they  do  not  achieve  the 
accuracies  of  numerical  integration. 

1.424  Observational  Data  The  computation  of  accurate  ephemerides  of  the  Sun, 
Moon,  and  planets  depends  upon  the  availability  of  accurate  observations  of  their 
positions  at  precisely  known  times.  Optical  observations  of  the  Sun,  Moon,  and 


30  EXPLANATORY  SUPPLEMENT 

planets  have  been  made  using  meridian,  or  transit  circles;  with  a  person's  eye;  or 
with  electronic  detectors.  Observations  of  Mercury,  Venus,  and  Mars  can  be  made  by 
radar  ranging.  Observations  of  the  Moon  have  been  made  using  laser  ranging  since 
1969.  Planetary  radar-ranging  and  Lunar  Laser-Ranging  provide  much  more  precise 
measurements  than  transit-circle  observations.  Radio  observations  of  spacecraft  on 
a  planet,  in  orbit  around  a  planet,  or  encountering  a  planet  also  provide  very  precise 
positional  data. 

Observations  of  the  satellites  can  be  made  by  photographic  or  charge-coupled 
devices  (CCD)  techniques,  and  by  recording  the  times  of  mutual  phenomena  (eclipses, 
transits,  or  occupations)  of  these  bodies.  Accurate  observational  data  go  back  to 
only  about  1830;  so  computations  of  the  motions  of  bodies  in  our  solar  system  are 
limited  by  the  160  years  of  observational  history. 

1.425  Differential  Corrections  The  process  of  correcting  a  numerical  integration 
or  an  analytical  theory  to  give  a  better  fit  to  the  observational  data  is  referred  to  as 
the  differential  correction  process.  In  this  process,  an  equation  of  condition  can  be 
written  for  each  observation.  This  equation  provides  the  relationship  between  cor- 
rections to  the  initial  adopted  conditions  of  the  motion  and  the  difference  between 
the  computed  and  observed  position  of  the  body.  These  equations  of  condition  are 
combined  into  normal  equations,  which  are  then  solved  to  determine  the  improved 
initial  conditions  for  the  motions.  This  process  is  described  in  textbooks  on  celestial 
mechanics. 

1.426  Representative  Ephemerides  It  is  often  advantageous  to  use  computers  to 
compute  the  positions  of  the  bodies  from  formulas  rather  than  to  read  ephemerides 
that  were  based  on  either  numerical  integrations  or  analytical  theories.  A  represen- 
tative ephemeris  can  be  prepared  by  evaluating  a  limited  expression  that  represents 
the  motion  of  the  body  to  a  specified  level  of  accuracy  over  a  limited  time  period. 
These  expressions,  which  are  usually  power  series  or  Chebyshev  polynomials,  pro- 
vide the  most  efficient  means  of  generating  the  ephemerides  with  computers. 

1.43   Perturbations  by  and  on  Extended  Bodies 

1.431  Gravity  Field  of  Extended  Bodies  Newton's  law  of  gravitation  formally  ap- 
plies to  idealized  point  masses,  but  it  can  be  shown  that  the  gravitational  force  due 
to  a  spherically  symmetric  body  is  the  same  as  if  all  the  mass  were  concentrated  at 
the  center.  In  practice,  astronomical  bodies  are  rarely  spherically  symmetric,  and 
most  are  rotating  at  such  a  rate  as  to  cause  the  bodies  to  be  clearly  oblate.  In  ad- 
dition, surfaces  of  equal  density  are  not  spherical,  and  the  gravitational  attraction 
on  an  external  point  mass  is  not  normally  in  the  radial  direction.  Other  departures 
from  purely  radial  variation  in  density  occur;  so  the  external  gravity  field  of  an 
extended  body,  such  as  a,  planet,  is  represented  by  a  spherical  harmonic  series.  The 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


31 


coefficients  of  such  a  series  may  be  determined  by  analyzing  the  departures  of  the 
motion  of  a  satellite  from  a  fixed  ellipse.  The  effects  are  most  noticeable  for  close 
satellites,  and  the  effects  of  the  higher-order  terms  decrease  very  rapidly  with  dis- 
tance. The  most  noticeable  effect  is  that  of  the  second-order  zonal  harmonic,  J2 
which  causes  the  pole  of  a  satellite  orbit  to  precess  around  the  polar  axis  of  the 
planet,  though  the  inclination  to  the  equator  remains  unaltered.. The  direction  of 
the  pericenter  also  precesses  around  the  orbit.  (See  Section  4.31.) 

The  equations  of  motion  of  a  satellite  may  be  referred  to  a  coordinate  system 
that  is  fixed  relative  to  the  planet  if  the  appropriate  Coriolis  terms  are  included  to 
take  account  of  the  rotation  of  the  planet.  The  expression  for  the  potential  function 
may  also  be  modified  in  a  similar  way— the  arbitrary  constant  in  the  potential 
function  is  usually  chosen  so  that  the  surface  of  zero  potential  corresponds  to  mean 
sea  level  (or  the  geoid)  in  the  case  of  the  Earth.  This  is  the  surface  from  which 
height  is  measured  for  mapping  purposes. 

1.432  Forces  on  Extended  Bodies  The  gravitational  forces  on  an  extended  body 
may  be  resolved  into  a  force  and  a  couple.  The  force  acts  through  the  center  of 
mass  and  causes  an  acceleration  of  the  body  in  its  orbit.  The  couple  changes  the 
rotational  motion  of  the  body.  A  simple  example  is  that  of  a  two-body  system, 
such  as  the  Sun  and  a  planet,  in  which  one  body  is  an  oblate  spheroid  that  is 
rotating  about  its  principal  axis.  The  torque,  which  may  be  considered  to  act  on 
the  equatorial  bulge,  has  a  gyroscopic  effect,  and  causes  the  principal  axis  to  precess 
around  the  normal  to  the  orbit  plane  at  a  constant  inclination.  In  more  complex 
systems,  a  nutational  motion  is  superimposed  on  the  main  precessional  motion,  and 
an  irregular  body  may  "tumble"  as  it  moves  around  its  orbit. 

The  forces  on  an  extended  body  will  also  cause  a  tidal  distortion  even  if  it  is  a 
solid,  but  slightly  elastic,  body.  The  effect  is  similar  to  that  of  the  ocean  tides  on 
the  Earth.  For  a  simple  model  there  are  two  "high  tides"  and  two  "low  tides"  that 
remain  stationary  with  respect  to  the  attracting  body.  The  line  of  the  high  tides  is 
slightly  displaced  from  the  line  joining  the  centers  of  the  two  bodies.  This  causes 
a  net  torque  that  tends  to  change  the  rate  of  rotation  of  the  body.  On  the  other 
hand,  the  existence  of  the  tidal  distortion  changes  the  attraction  on  the  other  body 
and  gives  a  small  component  at  right  angles  to  the  line  of  centers,  thus  causing  the 
orbit  to  expand  or  contract,  depending  on  the  circumstances.  This  effect  is  referred 
to  as  tidal  friction. 

The  principal  elastic  properties  of  a  spherical  body  may  be  represented  in  terms 
of  parameters  known  as  Love  numbers.  Resonance  effects  may  occur  if  the  tidal 
forces  contain  a  periodic  component  that  matches  one  of  the  natural  frequencies 
of  vibration  of  the  body.  The  dissipation  of  the  tidal  energy  may  be  large  enough 
to  heat  the  body  significantly;  this  is  believed  to  be  the  case  for  Io  of  the  Galilean 
satellites  of  Jupiter. 


32  EXPLANATORY  SUPPLEMENT 

The  forces  that  give  rise  to  the  nutation  of  the  rotation  and  the  tidal  distortion 
of  the  shape  of  a  body  are  essentially  the  same,  although  in  the  past  t  hey  have  often 
been  expressed  in  different  forms,  and  with  different  notations.  These  forces  can  be 
derived  from  a  potential  function  that  allows  the  various  periodic  terms  in  the 
nutation  and  in  the  tides  to  be  identified  and  computed.  The  accurate  computation 
of  the  Earth's  nutation  requires  the  adoption  of  a  model  of  its  elastic  properties 
and  also  of  the  viscous  properties  and  shape  of  the  fluid  core. 

1 .5    ASTRONOMICAL  PHENOMENA 

The  various  motions  involved  in  the  solar  system,  including  the  rotation  of  the 
Earth,  the  orbital  motion  of  the  Earth  and  planets,  and  the  motion  of  the  Moon 
around  the  Earth,  cause  a  number  of  important  and/or  interesting  astronomical 
phenomena.  Some  of  these  phenomena  are  events  that  can  be  timed  exactly,  some 
are  matters  of  arbitrary  definitions,  and  others  are  not  subject  to  either  exact  timing 
or  exact  definitions. 

1.51    Rising,  Setting,  and  Twilight 

The  rising  and  setting  times  of  an  object  are  given  with  respect  to  sea  level,  a 
clear  horizon,  and  refraction  based  on  normal  meteorological  conditions.  Rising 
and  setting  times  are  strictly  local  phenomena  depending  upon  the  longitude  and 
latitude  of  the  place  on  the  Earth's  surface.  For  the  Sun  and  Moon,  the  times  of 
rising  and  setting  refer  to  the  instants  when  the  upper  limb  of  the  body  appears  on 
the  apparent  horizon. 

The  actual  times  of  rising  and  setting  may  differ  considerably  from  the  tabu- 
lated values,  especially  near  extreme  conditions  when  the  altitude  is  changing  very 
slowly.  Thus,  the  computation  of  the  time  of  moonrise  and  moonset  for  very  north- 
ern or  southern  latitudes  can  be  subject  to  large  uncertainties.  Also,  the  use  of 
imprecise  methods  can  lead  to  extremely  large  errors.  In  addition,  the  illumination 
at  the  beginning  or  the  end  of  twilight  can  vary  greatly  because  of  meteorological 
conditions  and  the  physical  surroundings.  Precise  times  have  little  real  significance 
except  in  special  circumstances,  such  as  navigation  at  sea. 

1.511  Times  of  Sunrise  and  Sunset  The  calculated  times  of  sunrise  and  sunset  are 
based  on  the  Sun  having  a  geocentric  zenith  distance  of  90°50'  (34'  is  allowed  for 
horizontal  refraction  using  a  standard  atmospheric  model,  and  16'  for  the  semi- 
diameter).  Corrections  are  necessary  if  the  meteorological  conditions  differ  signif- 
icantly from  the  standard  model  or  to  allow  for  the  height  of  the  observer  or  the 
elevation  of  the  actual  horizon.  The  times  of  rising  and  setting  and  associated  phe- 
nomena change  rapidly  from  day  to  day  in  polar  regions  or  may  not  occur  for  long 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  33 

periods.  When  the  Sun  is  continuously  very  near  the  horizon,  accurate  times  are 
difficult  to  tabulate. 

1.512  Twilight  Conditions  Twilight  is  caused  when  sunlight  is  scattered  by  the 
upper  layers  of  the  Earth's  atmosphere.  Twilight  takes  place  before  sunrise  or  after 
sunset.  There  are  three  distinct  types  of  twilight.  Civil  twilight  ends  in  the  evening 
or  begins  in  the  morning  when  the  center  of  the  Sun  reaches  a  zenith  distance  of 
96°.  Nautical  twilight  ends  or  begins  when  the  Sun  reaches  a  zenith  distance  of 
102°.  Astronomical  twilight  ends  or  begins  when  the  Sun  reaches  a  zenith  distance 
of  108°.  In  good  weather  conditions  and  in  the  absence  of  other  illumination,  the 
indirect  illumination  of  the  Sun  at  the  beginning  or  end  of  civil  twilight  allows 
the  brightest  stars  to  be  visible  and  the  sea  horizon  to  be  clearly  defined.  For  the 
beginning  or  end  of  nautical  twilight,  the  sea  horizon  is  generally  not  visible,  and 
it  is  too  dark  for  observations  of  altitudes  with  reference  to  the  horizon.  At  the 
beginning  or  end  of  astronomical  twilight,  the  indirect  illumination  from  the  Sun 
is  less  than  the  contribution  from  starlight  and  is  of  the  same  order  as  that  from 
the  aurora,  airglow,  zodiacal  light,  and  the  gegenschein.  In  all  cases  the  actual 
brightness  of  the  sky  depends  on  direction  as  well  as  meteorological  conditions. 

1 .52  Meridian  Transit 

Once  each  day  at  a  given  location  the  Earth's  rotation  causes  a  celestial  body  to 
cross  the  meridian  plane  defined  by  the  north  and  south  poles  and  the  zenith.  When 
this  happens,  the  object  will  have  its  maximum  altitude  with  respect  to  the  horizon. 
Generally,  observations  with  a  telescope  are  best  made  when  the  object  has  an  hour 
angle  of  less  than  two  hours. 

For  objects  near  the  pole  that  can  be  observed  as  circumpolar  objects  from  a 
given  location,  there  can  be  a  second  meridian  transit  when  the  object  is  below 
the  pole  (lower  transit).  Observations  when  the  object  is  above  the  pole  are  called 
upper  transit.  These  two  observations  permit  an  independent  determination  of  the 
location  of  the  pole. 

1 .53  Conjunction,  Opposition,  and  Elongation 

The  times  of  conjunction  and  opposition  of  the  planets  are  those  at  which  the 
difference  between  the  apparent  geocentric  longitudes  of  the  planet  and  the  Sun 
are  0°  and  180°,  respectively.  Conjunctions  for  the  outer  planets  take  place  when 
the  planets  are  in  the  direction  of  the  Sun  from  the  Earth.  Oppositions  occur  when 
the  planets  are  in  the  opposite  direction  from  the  Sun  with  respect  to  the  Earth.  For 
Mercury  and  Venus,  superior  conjunctions  take  place  when  the  planets  are  more 
distant  from  the  Earth  than  the  Sun,  and  inferior  conjunctions  occur  when  the 
planets  are  closer  to  the  Earth  than  the  Sun. 


34  EXPLANATORY  SUPPLEMENT 

If  heliocentric  geometric  longitudes  are  used  in  place  of  geocentric  longitudes, 
a  small  correction  must  be  applied  to  correct  for  the  effect  of  light-time.  This 
correction  can  be  a  maximum  of  10  minutes  for  the  conjunctions  of  Venus  and 
Mars.  Due  to  the  eccentricities  and  inclinations  of  the  orbits  and  the  effect  of 
perturbations,  the  times  for  these  phenomena  may  be  different  from  those  at  which 
the  geocentric  distance  is  a  minimum  at  inferior  conjunction  of  Mercury  or  Venus  or 
opposition  of  a  superior  planet,  or  at  which  the  distance  is  a  maximum  at  superior 
conjunction  of  Mercury  or  Venus  or  conjunction  of  a  superior  planet. 

The  elongation  {£)  of  a  planet,  measured  eastward  or  westward  from  the  Sun, 
is  calculated  as  the  angle  formed  by  the  planet,  the  Earth,  and  the  Sun.  The  elonga- 
tions are  measured  from  0°  to  180°  east  or  west  of  the  Sun  and  are  tabulated  to  the 
nearest  degree.  Because  of  the  inclination  of  the  planetary  orbits,  the  elongations 
do  not  necessarily  pass  through  0°  or  180°  as  they  change  from  east  to  west  or  west 
to  east. 

1 .54   Eclipses,  Occultations,  and  Transits 

An  eclipse  takes  place  when  one  body  passes  into  the  shadow  of  another  body.  An 
occultation  takes  place  when  a  larger  body  passes  in  front  of  a  smaller  body  so 
that  it  cannot  be  seen  by  the  observer.  A  solar  eclipse  takes  place  when  the  Moon 
blocks  the  light  of  the  Sun  as  seen  by  an  observer  on  Earth,  and  so  is  really  an 
occultation.  A  transit  takes  place  when  a  smaller  body  passes  in  front  of  a  larger 
body,  e.g.,  when  a  satellite  passes  in  front  of  a  planet  or  when  a  planet  passes  in 
front  of  the  Sun.  A  shadow  transit  takes  place  when  the  shadow  of  a  smaller  body 
passes  in  front  of  a  larger  body.  This  can  occur  when  the  shadows  of  satellites  pass 
in  front  of  planets. 

1.541  Transits  Transits  of  Mercury  and  Venus  across  the  Sun's  disk  can  occur 
only  when  both  the  Earth  and  the  planet  are  simultaneously  very  close  to  the 
same  node  of  the  planet's  orbit  on  the  ecliptic.  Because  of  the  near-  constancy  of 
the  longitude  of  the  nodes  and  perihelia  of  the  planets,  the  Earth  will  be  near  the 
nodes  on  about  the  same  dates  each  year,  and  the  planets  will  be  at  the  same  point 
in  their  orbits  when  they  pass  through  the  ecliptic.  For  the  highly  eccentric  orbit 
of  Mercury,  this  means  that  the  conditions  and  limits  at  the  November  transits  are 
very  different  from  those  at  the  May  transits.  During  the  twentieth  century  there 
are  fourteen  transits  of  Mercury — ten  in  November  and  four  in  May,  including 
grazing  transits  in  1937  May  and  1999  November.  Future  transits  will  take  place 
on  1993  November  6  and  1999  November  15.  In  the  twenty-first  century  there  will 
be  five  transits  in  May  and  nine  in  November.  The  transits  of  Venus  are  quite  rare. 
Generally  there  are  two  transits  of  Venus  within  an  eight-year  period  and  then  a 
gap  of  over  100  years  until  the  next  pair  of  transits.  The  next  transits  of  Venus  will 
be  2004  June  8  and  2012  June  6. 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY  35 

1.542    Solar  Eclipses   Eclipses  of  the  Sun  or  Moon  occur  when  the  centers  of  the 
Sun,  Earth,  and  Moon  are  nearly  in  a  straight  line.  This  condition  can  be  fulfilled 
only  when  conjunction  or  opposition  occurs  in  the  vicinity  of  a  node  of  the  lunar 
orbit  on  the  ecliptic.  A  total  solar  eclipse  takes  place  when  the  disk  of  the  Moon 
appears  to  completely  cover  the  disk  of  the  Sun.  Alternately,  an  annular  solar  eclipse 
takes  place  when  the  apparent  disk  of  the  Moon  is  smaller  than  the  apparent  disk 
of  the  Sun,  so  that  the  fight  of  the  Sun  is  not  completely  blocked.  A  partial  eclipse 
of  the  Sun  takes  place  when  the  location  on  the  Earth  is  not  in  the  path  of  the 
umbral  shadow  cast  by  the  Moon.  The  exterior  tangents  to  the  surfaces  of  the  Sun 
and  Moon  form  the  umbral  shadow  cone.  The  interior  tangents  form  the  penumbral 
cone.  The  common  axis  of  the  cones  is  the  axis  of  the  shadow.  The  actual  size  of 
the  shadow  will  be  rather  small,  leading  to  a  narrow  path  and  a  short  duration 
for  an  eclipse.  The  path  of  the  shadow  on  the  surface  of  the  Earth  can  be  rather 
complicated,  due  to  the  orbital  motions  of  the  Earth  and  Moon,  and  the  rotation 
of  the  Earth.  Seven  minutes  of  total  solar  eclipse  is  a  rather  long  period  for  totality. 
The  actual  length  of  time  and  width  of  the  path  varies  for  solar  eclipses.  Solar 
eclipses  come  in  certain  patterns  that  repeat  after  a  long  interval  called  a  Saros, 
A  Saros  is  approximately  223  lunations,  which  is  approximately  19  passages  of  the 
Sun  through  a  node  or  approximately  6585  1/3  days  (see  Chapter  8). 

1.543  Lunar  Eclipses  A  lunar  eclipse  takes  place  when  the  Moon  passes  through 
the  shadow  of  the  Earth.  In  this  case,  the  times  and  circumstances  are  the  same 
for  all  parts  of  the  Earth  from  which  the  Moon  is  visible.  There  are  three  types 
of  lunar  eclipses:  A  penumbral  eclipse,  also  called  an  appulse,  takes  place  when  the 
Moon  enters  only  the  penumbra  of  the  Earth.  A  partial  eclipse  occurs  when  the 
Moon  enters  the  umbra  without  being  entirely  immersed  in  it.  A  total  eclipse  takes 
place  when  the  Moon  is  entirely  immersed  within  the  umbra. 

1 .55   Satellite  Phenomena 

The  Galilean  satellites  of  Jupiter  undergo  the  phenomena  of  eclipses,  occultations, 
transits,  and  shadow  transits.  The  times  for  beginning  or  ending  of  these  phenomena 
(i.e.,  the  disappearance  and  reappearance  for  eclipses  and  occultations,  and  the 
ingress  and  egress  for  transits  and  shadow  transits)  are  given  in  The  Astronomical 
Almanac.  When  Jupiter  is  in  opposition,  the  shadow  may  be  hidden  by  the  disk 
and  no  eclipse  can  be  observed.  In  effect  the  satellite  is  occulted  by  the  planet 
before  it  goes  into  eclipse.  In  general,  eclipses  may  be  observed  on  the  western 
side  of  Jupiter  before  opposition  and  on  the  eastern  side  after  opposition.  Before 
opposition,  only  the  disappearance  of  Satellite  I  into  the  shadow  may  be  observed, 
since  it  is  occulted  before  reappearance.  After  opposition,  only  the  reappearances 
from  the  shadow  are  visible.  In  general,  the  same  is  true  for  Satellite  II,  although 
occasionally  both  phenomena  can  be  seen.  For  Satellites  III  and  IV,  both  phases 


36  EXPLANATORY  SUPPLEMENT 

of  the  eclipses  are  usually  visible  except  near  certain  oppositions.  Similarly,  the 
occultation  disappearances  and  reappearances  of  the  satellite  cannot  be  observed 
if  at  the  times  concerned  the  satellite  is  eclipsed. 

For  Satellites  I  and  II  there  are  usually  cycles  of  six  phenomena  consisting  of 
both  phases  of  both  transit  and  shadow  transit,  of  one  phase  of  the  eclipse,  and  the 
other  phase  of  the  occultation.  For  Satellite  IV,  none  of  the  phenomena  occur  when 
the  plane  of  the  satellite's  orbit,  which  is  essentially  the  same  as  that  of  Jupiter's 
equator,  is  inclined  more  than  about  2°  to  the  line  from  Jupiter  to  the  Earth  (for 
occultations  and  transits)  or  to  the  Sun  (for  eclipses  and  shadow  transits).  Because 
of  the  finite  disks  of  the  satellites,  the  phenomena  do  not  take  place  instantaneously. 
The  times  given  refer  to  the  centers  of  the  disks.  At  certain  times  similar  phenomena 
can  take  place  for  Saturn  satellites.  Predictions  of  these  phenomena  are  made  in 
special  publications. 


1 .56   Physical  Observations  of  the  Sun,  Moon,  and  Planets 

In  addition  to  needing  information  about  the  positions  of  the  bodies  and  the  phe- 
nomena due  to  the  relative  positions  of  the  bodies,  one  also  needs  information  about 
the  physical  appearance  of  the  bodies.  A  physical  ephemeris  gives  information  about 
the  orientation,  illumination,  and  appearance  of  the  body;  it  also  provides  data  that 
can  be  used  in  determining  the  cartographic  coordinates  of  points  on  the  surface. 
For  each  body,  it  is  necessary  to  adopt  a  set  of  rotational  elements  and  other  pa- 
rameters that  specify  the  shape  of  the  surface  and  identify  the  position  of  the  prime 
meridian.  For  the  Sun,  and  for  planets  and  satellites  whose  solid  surfaces  cannot 
be  seen,  it  is  necessary  to  adopt  conventional  values  of  the  rotational  elements.  It 
also  may  be  convenient  to  adopt  different  values  of  the  rate  of  rotation  for  certain 
bands  of  latitude.  The  position  of  the  prime  meridian  is  fixed  by  adopting  a  value 
for  the  longitude  of  the  central  meridian  (which  passes  through  the  pole  of  rotation 
and  the  apparent  center  of  the  disk)  at  some  suitable  arbitrary  epoch.  For  a  body 
with  a  solid  surface,  the  prime  meridian  is  usually  defined  with  respect  to  a  clear, 
sharp,  surface  feature.  The  appropriate  ephemeris  data  are  tabulated  for  the  Sun, 
Moon,  and  planets  in  The  Astronomical  Almanac.  The  basic  values  for  the  Sun, 
Moon,  planets,  and  satellites  are  given  in  their  respective  sections. 

The  fraction  of  the  area  of  the  apparent  disk  of  the  Moon  or  planet  that  is  illu- 
minated by  the  Sun  is  called  the  phase.  It  depends  on  the  planetocentric  elongation 
of  the  Earth  from  the  Sun,  which  is  called  the  phase  angle.  Neglecting  the  oblate- 
ness  of  the  body,  the  apparent  disk  is  circular,  and  the  terminator  is  the  orthogonal 
projection,  onto  a  plane  perpendicular  to  the  line  of  sight,  of  the  great  circle  that 
bounds  the  illuminated  hemisphere  of  the  body.  The  terminator  is  therefore,  in 
general,  an  ellipse,  reducing  to  a  straight  line  at  a  phase  angle  of  90°  and  becoming 
a  circle  at  a  phase  angle  of  0°  or  1 80° . 


1  /  INTRODUCTION  TO  POSITIONAL  ASTRONOMY 


37 


The  elements  of  the  rotational  motion  are  the  period  of  rotation,  the  position  of 
the  axis  of  rotation  in  space  (represented  either  by  the  coordinates  of  the  point  on 
the  celestial  sphere  toward  which  the  axis  is  directed;  i.e.,  the  pole  of  the  rotation, 
or  by  the  inclination  and  node  of  the  equator  on  an  adopted  reference  plane) ,  and 
the  planetographic  longitude  of  the  central  point  of  the  apparent  disk  at  an  adopted 
epoch.  This  longitude  defines  the  central  meridian  on  the  disk. 

In  general,  the  apparent  positions  of  points  on  the  disk  are  represented  most 
conveniently  by  the  apparent  distance  and  position  angle  relative  to  the  central 
point  of  the  disk.  Position  angles  are  ordinarily  measured  from  the  north  point  of 
the  disk  toward  the  east.  The  central  point  of  the  apparent  disk  is  the  subterrestrial 
point  on  the  surface.  Its  position  on  the  geocentric  celestial  sphere  is  diametrically 
opposite  the  apparent  position  of  the  Earth  on  the  planetocentric  celestial  sphere. 
The  north  point  of  the  disk  is  on  the  apparent  northern  limb  at  its  intersection  with 
the  celestial  meridian  that,  passes  through  the  north  celestial  pole  and  the  center 
of  the  disk.  The  vertex  of  the  disk  is  on  the  apparent  upper  limb  at  its  intersection 
with  the  vertical  circle  that  passes  through  the  zenith  and  the  center  of  the  disk. 

Two  types  of  coordinate  systems  are  used  for  physical  observations.  Planeto- 
centric coordinates  are  for  general  use  where  the  s-axis  is  the  mean  axis  of  rotation, 
the  jc-axis  is  the  intersection  of  the  planetary  equator  (normal  to  the  z-axis  through 
the  center  of  mass)  and  an  arbitrary  prime  meridian,  and  the  y-axis  completes  a 
right-hand  coordinate  system.  Longitude  of  a  point  is  measured  positive  to  the  east 
from  the  ephemeris  position  of  the  prime  meridian  as  defined  by  rotational  ele- 
ments. Latitude  of  a  point  is  the  angle  between  the  planetary  equator  and  a  line  to 
the  center  of  mass.  The  radial  distance  is  measured  from  the  center  of  mass  to  the 
surface  point. 

Planetographic  coordinates  are  used  for  cartographic  purposes  and  are  depen- 
dent on  an  equipotential  surface  or  an  adopted  ellipsoid  as  a  reference  surface. 
Longitude  of  a  point  is  measured  in  the  direction  opposite  to  the  rotation  (pos- 
itive to  the  west  for  direct  rotation)  from  the  cartographic  position  of  the  prime 
meridian  defined  by  a  clearly  observable  surface  feature.  Latitude  of  a  point  is  the 
angle  between  the  planetary  equator  (normal  to  the  z-axis  and  through  the  center 
of  mass)  and  the  normal  to  the  reference  surface  at  the  point.  The  height  of  a  point 
is  specified  as  the  distance  above  a  point  with  the  same  longitude  and  latitude  on 
the  reference  surface. 


38 


EXPLANATORY  SUPPLEMENT 


1.6  REFERENCES 

Brouwer,  D.  and  Clemence,  G.M.  (1961).  Methods  of  Celestial  Mechanics  (Academic  Press, 

New  York  and  London). 
Danby,  J.M.A.  (1962,  1988).  Fundamentals  of  Celestial  Mechanics  (Willmann-Bell,  Inc., 

Richmond,  VA). 

Explanatory  Supplement  to  The  Astronomical  Ephemeris  and  The  American  Ephemeris 

and  Nautical  Almanac  (1961).  (Her  Majesty's  Stationery  Office,  London). 
Hagahara,  Y.  (1970).  Celestial  Mechanics  Volumes  I  and  II  (MIT  Press,  Cambridge,  MA 

and  London,  England)  Volumes  III,  IV  and  V  (Japan  Society  for  the  Promotion  of 

Science,  Kojimachi,  Cheyoda-ku,  Tokyo). 
Herget,  P.  (1948).  Computation  of  Orbits  Published  privately  by  the  author.  (Willmann- 

Beli,  Inc.,  Richmond,  VA). 
Mueller,  LI.  (1969).  Spherical  and  Practical  Astronomy  as  Applied  to  Geodesy  (Ungar, 

New  York). 

Woolard,  E.W.  and  Clemence,  G.M.  (1966).  Spherical  Astronomy  (Academic  Press,  New 
York  and  London). 


CHAPTER 


Time 

by  P.K.  Seidelmann,  B.  Guinot,  and  LE.  Doggett 


2.1  INTRODUCTION 

The  methods  and  accuracy  of  timekeeping  have  changed  dramatically  since  1960. 
The  definition  of  the  second — the  most  precisely  reproducible  unit  in  the  Systeme 
International  (SI) — was  once  based  on  the  rotation  or  the  motion  of  the  Earth.  Now 
the  second  is  based  on  natural  frequencies  of  atoms  of  selected  elements.  These 
changes  are  significant  for  three  reasons: 

(1)  All  time  systems  now  refer  to  the  SI  second. 

(2)  Precise  time  is  available  on  a  real-time  basis. 

(3)  The  unit  of  distance,  the  meter,  has  been  defined  most  precisely  in  terms 
of  the  distance  traveled  by  light  in  a  ^iven  time  interval. 

To  establish  a  system  of  time,  one  must  define  two  quantities:  the  unit  of 
duration  (for  example,  the  second  or  the  day),  and  the  epoch,  or  the  zero,  of  the 
chosen  time.  In  physics  and  astronomy,  there  are  four  types  of  systems  in  common 
use.  Broadly  speaking,  they  are  the  following: 

(a)  Atomic  time,  in  which  the  unit  of  duration  corresponds  to  a  defined  number 
of  wavelengths  of  radiation  of  a  specified  atomic  transition  of  a  chosen 
isotope. 

(b)  Universal  Time,  in  which  the  unit  of  duration  represents  the  solar  day, 
defined  to  be  as  uniform  as  possible,  despite  variations  in  the  rotation  of 
the  Earth. 

(c)  Sidereal  time,  in  which  the  unit  of  duration  is  the  period  of  the  Earth's 
rotation  with  respect  to  a  point  nearly  fixed  with  respect  to  the  stars. 

(d)  Dynamical  time,  in  which  the  unit  of  duration  is  based  on  the  orbital  motion 
of  the  Earth,  Moon,  and  planets. 


39 


40  EXPLANATORY  SUPPLEMENT 

Fast-rotating  pulsars  (millisecond  pulsars)  may  in  the  future  lead  to  a  new  time 
system.  In  each  of  these  systems,  various  definitions  of  the  unit  of  duration  and  of 
the  epoch  have  prevailed  in  different  periods  of  recent  astronomical  history.  The 
following  section  describes  the  details  of  these  systems. 


2.2    MEASURES  OF  TIME  AND  THEIR  RELATIONSHIPS 
2.21    Atomic  Time  (TAI) 

Atomic  time  is  based  on  counting  the  cycles  of  a  high-frequency  electrical  sig- 
nal that  is  kept  in  resonance  with  an  atomic  transition.  The  fundamental  unit  of 
atomic  time  is  the  Systeme  International  (SI)  second.  It  is  denned  as  the  duration 
of  9,192,631,770  periods  of  the  radiation  corresponding  to  the  transition  between 
two  hyperfine  levels  of  the  ground  state  of  the  cesium-133  atom  (see  Section  2.312). 

International  Atomic  Time  (Temps  Atomique  International,  or  TAI)  is  a  prac- 
tical time  standard  that  conforms  as  closely  as  possible  to  the  definition  of  the 
SI  second.  It  fulfills  the  needs  of  accuracy,  long-term  stability,  and  reliability  for 
astronomy.  Although  TAI  was  officially  introduced  in  January  1972,  it  has  been 
available  since  July  1955.  The  SI  second  and  International  Atomic  Time  are  used 
as  bases  for  interpolation  and  prediction  of  the  other  timescales. 

TAI  results  from  the  analysis  by  the  Bureau  International  des  Poids  et  Measures 
in  Sevres,  France,  of  individual  timescales  from  commercial  atomic-time  standards 
and  the  primary  frequency  standards  in  many  countries.  It  is  realized  in  two  steps. 
First,  an  intermediate  time  scale,  denoted  EAL  (Echelle  Atomique  Libre),  is  formed 
by  combining  data  from  all  available  high-precision  atomic  standards.  The  data 
from  the  individual  clocks  are  combined  using  an  algorithm  that  minimizes  the 
effect  of  adding  and  dropping  clocks  and  that  weights  clocks  appropriately.  As  the 
name  implies,  EAL  is  a  free-running,  data-controlled  timescale.  After  analysis  of 
EAL,  corrections  are  applied  for  known  effects  to  maintain  a  unit  of  time  as  close  as 
possible  to  the  definition  of  the  SI  second.  This  adjusted  timescale  is  published  as 
TAI.  Since  TAI  is  accessible  through  the  published  corrections  to  each  contributing 
timescale,  it  is  often  called  a  paper-scale  clock. 

A  large  number  of  commercial  cesium  standards  and  a  few  hydrogen  masers 
provide  availability,  reliability,  and  short-term  stability  to  the  TAI  system.  Accuracy 
and  long-term  stability  are  provided  by  laboratory  cesium  clocks  or  standards. 
It  is  anticipated  that  improvements  in  the  clocks  or  standards  will  permit  future 
improvements  in  the  International  Atomic  Time,  but  the  fundamental  principles 
underlying  the  formulation  of  the  TAI  will  remain  the  same. 

2.211  Relativistic  Effects  Advances  in  the  accuracy  of  time  comparisons  require 
the  adoption  of  a  set  of  conventions  and  a  coordinate  reference  frame  to  account 
for  relativistic  effects  in  an  internally  consistent  manner.  At  its  9th  session  (1980 


2  /  time  41 

September  23-25),  the  Consultative  Committee  for  the  Definition  of  the  Second 
(CCDS)  recognized  this  need  and  proposed  the  following  to  the  International  Com- 
mittee of  Weights  and  Measures  (CIPM): 

(a)  that  TAI  is  a  coordinate  timescale  defined  at  a  geocentric  datum  line  and 
having  as  its  unit  one  SI  second  as  obtained  on  the  geoid  in  rotation; 

(b)  that  with  the  present  state  of  the  art,  TAI  may  be  extended  with  sufficient 
accuracy  to  any  fixed  or  mobile  point  near  the  geoid  by  applying  the  correc- 
tions of  the  first-order  of  general  relativity  (i.e.,  corrections  for  differences 
in  gravitational  potential  and  velocity  and  for  the  rotation  of  the  Earth). 


2.22   Dynamical  Time 


Dynamical  time  represents  the  independent  variable  of  the  equations  of  motion  of 
the  bodies  in  the  solar  system.  According  to  the  theory  of  relativity,  this  inde- 
pendent variable  depends  on  the  coordinate  system  being  used  as  the  system  of 
reference.  In  modern  astronomy,  the  equations  of  motion  are  often  referred  to  the 
barycenter  of  the  solar  system.  As  a  result  there  is  a  family  of  barycentric  dynami- 
cal timescales  that  depend  on  various  forms  of  relativistic  theory.  The  independent 
variable  of  an  apparent  geocentric  ephemeris  is  a  terrestrial  dynamical  time,  which 
is  also  theory  dependent.  For  a  given  relativistic  theory  there  exists  a  transforma- 
tion between  the  barycentric  and  terrestrial  dynamical  timescales.  The  arbitrary 
constants  in  the  transformation  can  be  chosen  so  that  the  timescales  have  only 
periodic  variations  with  respect  to  each  other. 

Since  the  transformation  between  barycentric  and  geocentric  timescales  de- 
pends upon  the  theory,  the  two  types  of  scales  cannot  both  be  unique.  Thus, 
the  dynamical  timescale  for  apparent  geocentric  ephemerides  was  chosen  to  be 
a  unique  timescale,  independent  of  the  theories,  whereas  the  dynamical  timescales 
for  barycentric  ephemerides  form  a  family  of  timescales  that  are  not  unique  and  are 
theory-dependent. 

The  recommendations  for  the  definition  of  dynamical  time  adopted  at  the  IAU 
General  Assembly  of  1976  in  Grenoble,  France  are  as  follows: 

(a)  At  the  instant  1977  January  OIWOXTOO*  TAI,  the  value  of  the  new  timescale 
for  apparent  geocentric  ephemerides  will  be  1977  January  1?0003725 
(l"00h0(r32!184)  exactly. 

(b)  The  unit  of  this  timescale  will  be  a  day  of  86,400  SI  seconds  at  mean  sea 
level. 

(c)  The  timescales  for  equations  of  motion  referred  to  the  barycenter  of  the  solar 
system  will  be  such  that  there  will  be  only  periodic  variations  between  these 
timescales  and  those  of  the  apparent  geocentric  ephemerides. 


42  EXPLANATORY  SUPPLEMENT 

In  1991,  in  the  framework  of  resolutions  encompassing  both  space  and  time 
references,  the  IAU  has  defined  new  timescales  TCB,  TCG,  and  TT,  as  explained 
in  Section  2.223.  In  the  1976  and  1991  resolutions,  the  dynamical  time  of  planetary- 
motions  is  identical  to  the  timescale  of  terrestrial  atomic  physics.  The  consequences 
of  this  assumption  are  considered  in  Section  2.34. 

2.221  Terrestrial  Dynamical  Time  Terrestrial  Dynamical  Time  (TDT)  is  the  the- 
oretical timescale  of  apparent  geocentric  ephemerides  of  bodies  in  the  solar  system. 
TDT  is  specified  with  respect  to  TAI  in  order  to  take  advantage  of  the  direct  avail- 
ability of  Coordinated  Universal  Time  (UTC),  which  is  based  on  the  SI  second. 
TDT  is  currently  set  equal  to  TAI  +  32,184  seconds. 

Since  TAI  is  a  statistical  timescale  based  on  a  large  number  of  clocks  operat- 
ing on  the  Earth,  and  TDT  is  an  idealized  uniform  timescale,  the  two  timescales 
cannot  be  made  identical.  TAI  is  subject  to  systematic  errors  in  the  length  of  the 
TAI  second  and  in  the  method  of  forming  TAI.  For  the  near  future,  however,  the 
cumulative  effect  of  such  errors  is  likely  to  be  significant  only  for  evaluation  of  the 
millisecond  pulsars. 

The  relationship  between  TDT  and  TAI  provides  continuity  with  ephemeris 
time  (ET).  The  chosen  offset  between  TDT  and  TAI  is  equal  to  the  estimate  of  the 
difference  between  ET  and  TAI  at  the  time  that  TDT  was  introduced.  For  years 
prior  to  1955,  when  atomic  time  was  not  available,  TDT  must  be  extrapolated 
backward,  using  the  theory  of  a  rapidly  moving  celestial  body  that  has  been  fit  to 
observations  made  since  1955.  The  Moon  and  Mercury  are  the  most  suitable  bodies 
for  such  purposes.  The  accuracy  of  the  backward  extrapolation  will  depend  on  the 
length  of  the  comparison  after  1955  and  will  deteriorate  as  a  function  of  the  length 
of  time  prior  to  1955.  Use  of  the  Moon  for  this  extrapolation  is  complicated  by  the 
Moon's  tidal  acceleration.  At  this  time  there  are  uncertainties  concerning  the  value 
of  the  tidal  acceleration  and  the  systematic  variations  between  the  theoretically 
calculated  position  of  the  Moon  and  the  observations. 

2.222  Barycentric  Dynamical  Time  Barycentric  Dynamical  Time  {TDB)  is  the  in- 
dependent variable  of  the  equations  of  motion  with  respect  to  the  barycenter  of  the 
solar  system.  In  practice,  TDB  is  determined  from  TDT  by  means  of  a  mathe- 
matical expression.  This  expression  depends  upon  the  constants,  the  positions  and 
motions  of  the  bodies  of  the  solar  system,  and  the  gravitational  theory  being  used. 
An  approximate  formula  is  sufficient  in  most  cases  for  converting  from  TDT  to 
TDB.  Such  a  formula  is 

TDB  =  TDT  +  0!00 1 658  sin  g  +  0!0000 1 4  sin  2g ,  (2.222- 1 ) 


where 


g  =  357?53  +  0, 9856003(JD  -  2451545.0) 


2  /  TIME  43 

and  JD  is  the  Julian  date  to  two  decimals  of  a  day. 

A  more  accurate  expression  is  given  by  Moyer  (1981): 

TDB  -  TDT  =  AT  a  +  4  VW0<?  sin  E  +  ,  sinD 

c1  c2(l  +  u) 


Sr{\  +  cose)« 

+  2c2  X 


(1  -  ^e2)  sin(UTl  +  A)  +  e  sin(UTl  +X-M) 


9  , 

+  -e2  sin(UTl  +A  -  2M) 

-  Scil  ~^°S£)M[sin(UTl  +  A  +  2L)  +  esin(UTl  +  A  +  2L  +  M)] 
2cl 

Sm{\  +cose)u  . 
+    o  ^/u   x    sin(UTl  +X-D) 
2c2(l  +n) 

Sc(sine)v  iijej   ,         Msa^sa  .  _ 
 s  cosL  +  -~  sin£j  +       —  sin£SA 

+  Sm(-L  ~  Lti  +   —  Sln^  ~  LSA) 

c2fi*  czn* 
+  MJ&Cl+cosg)         T1  +  A+L_4) 
2cl  /i* 

^sa5sa(1  +cose)w  .  L\J_rr\  mil  t, 

+  —  -  -  sin(UTl  +  A  +  L  -  LSa).  (2.222-2) 

2c  2fi* 

When  numerical  values  are  substituted  into  the  expression,  the  relationship 
becomes: 

TDB  —  TDT  -  A7X  +  1 .  658  x  1CT3  sin£+  1.548  x  10"6sin£» 

+  3. 17679  x  10_1(Wn(UTl  +A)  +  5.312x  lCTI2u  sin(UTl  +  A  -  M) 

+  1.00  x  10_13wsin(UTl  +  A-2M)  -  1.3677  x  10~UHsin(UTl  +  A  +  2L) 

-  2. 29  x  1 0~uu  sin(UTl  +  A  +  2  L  +  A/)  +  1 . 33  x  10~ l3u  sin(UTl  +  A  -  D) 

-  1.3184  x  10-'°vcosL  +  5.21  x  10-6sinEj 

+  2. 45  x  10"6  sin  £SA  +  20. 73  x  10"6  sin(L  -  Ls) 

+  4. 58  x  10"6  sin(L  -  LSk)  +  1. 33  X  10"  !3w  sin(UTl  +  A  +  L  -  L3) 

+  2.9  x  10_14Hsin(UTl  +  A  +  L  -  LSA).  (2.222-3) 

The  symbols  in  Equations  2.222-2  and  2.222-3  are  defined  as  follows: 

A7"A  —  constant  term  in  expression 
c  =  speed  of  light 

r|,  rf  =  position  and  velocity  vectors  of  point  i  relative  to  point  j.  The  dot  denotes 
differentiation  with  respect  to  coordinate  time  t 


44  EXPLANATORY  SUPPLEMENT 

Hi  =  gravitational  constant  of  body  i 

fi*  -  gravitational  constant  of  the  Sun  augmented  by  the  gravitational  con- 
stants of  the  planets  and  the  Moon 
a,-,  ei,  Ej  =  semi-major  axis,  eccentricity,  and  eccentric  anomaly,  respectively,  of 
heliocentric  orbit  of  planet  i;  without  subscript,  the  orbit  of  Earth-Moon 
barycenter 

St  =  circular  orbit  velocity  of  planet  i  relative  to  Sun,  i/(fis  +  A*;)  /  ai 
A  =  east  longitude  of  atomic  clock 

u  =  distance  from  Earth's  spin  axis  of  atomic  clock  in  km 
v  =  coordinate  of  atomic  clock  in  distance  from  Earth's  equatorial  plane 
(positive  north)  in  km 
am  =  semi-major  axis  of  geocentric  orbit  of  the  Moon 
Sm  =  circular  orbit  velocity  of  the  Moon  relative  to  Earth,  V(Me  +  fj,m)  I  am 
e  =  mean  obliquity  of  the  ecliptic,  i.e.,  inclination  of  the  ecliptic  plane  to 
mean  Earth  equator  of  date 
<?m  =  Greenwich  mean  sidereal  time  =  Greenwich  hour  angle  of  mean  equinox 
of  date 

5c  -  circular  orbit  velocity  of  Earth-Moon  barycenter  relative  to  the  Sun, 
V(j"s  +  Me  +  Mm)  /  a 

L  =  mean  longitude  of  the  Sun  with  respect  to  the  Earth-Moon  barycentric 

referred  to  the  mean  equinox  and  ecliptic  date 
D  -  the  mean  elongation  of  the  Moon  from  the  Sun 
Li  —  heliocentric  mean  longitude  of  planet  / 

Subscripts  and  superscripts  are  as  follows: 

A  -  location  of  atomic  clock  on  Earth  that  reads  International  Atomic  Time  (r) 
rn  -  Moon 
S  =  Sun 

C  =  solar  system  barycenter 
E  =  Earth 
J  =  Jupiter 
SA  =  Saturn 

The  absence  of  a  subscript  indicates  the  Earth. 

The  relation  between  the  eccentric  and  mean  anomalies  is: 

E  =  M  +  e  sin  M  +  (e2  I  2)  sin  2  M  +  -  • .  (2.222-4) 

The  eccentric  anomalies  of  the  Earth,  Jupiter  and  Saturn  can  be  computed  to 
sufficient  accuracy  from 


£e  =  Me  +  e  sin  A/e 


2  /  TIME 


45 


Es  =  Mj  (2.222-5) 
Esk  =  MSa 

2.223  Space-Time  Coordinates  In  1991  the  IAU  adopted  resolutions  clarifying  the 
relationships  between  space-time  coordinates.  These  resolutions  introduced  Terres- 
trial Time  (TT),  Geocentric  Coordinate  Time  (TCG),  and  Barycentric  Coordinate 
Time  (TCB),  and  they  permitted  the  continued  use  of  Barycentric  Dynamical  Time 
(TDB). 

The  space-time  coordinates  (x°  =  ct,  x1,  X2,  X3)  would  be  defined  in  the  frame- 
work of  the  general  theory  of  relativity  in  such  a  way  that  in  each  coordinate  system 
centered  at  the  barycenter  of  an  ensemble  of  masses  exerting  the  main  action,  the 
interval  ds2  would  be  expressed  at  the  minimum  degree  of  approximation  by 

ds2  =  -<*dTi  =  -fl-^j  (dx°f+(l  +  ^)  [(^x])2  +  (^2)2  +  (^3)2]  (2.223-1) 

where  c  is  the  velocity  of  light,  r  is  the  proper  time,  and  U  is  the  sum  of  the 
gravitational  potentials  of  the  ensemble  of  masses  and  a  tidal  potential  generated 
by  the  external  bodies,  the  latter  potential  vanishing  at  the  barycenter. 
The  space-time  coordinates  are  further  constrained  such  that: 

(1)  The  space  coordinate  grids  with  origins  at  the  solar  system  barycenter  and 
at  the  Earth's  center  of  mass  show  no  global  rotation  with  respect  to  a  set 
of  distant  extragalactic  objects. 

(2)  The  time  coordinate  is  derived  from  a  timescale  realized  by  atomic  clocks 
operating  on  the  Earth. 

(3)  The  basic  physical  units  of  space-time  in  all  coordinate  systems  are  the  SI 
second  for  proper  time  and  the  SI  meter  for  proper  length  (this  is  related 
to  the  SI  second  by  the  value  of  the  velocity  of  light:  c  =  299792458ms"1). 

It  should  be  noted  that  the  preceding  kinematic  constraint  for  the  state  of  ro- 
tation of  the  geocentric  reference  system  implies  that  when  the  system  is  used  for 
dynamics  (e.g.,  the  motion  of  the  Moon),  one  must  take  into  account  the  time- 
dependent  geodesic  precession  in  the  motion  of  the  Earth,  and  introduce  the  corre- 
sponding inertial  terms  in  the  equations.  Also,  if  the  previously  defined  barycentric 
reference  system  is  used  for  dynamical  studies,  the  kinematic  effects  of  the  galactic 
geodesic  precession  may  have  to  be  taken  into  account. 

To  be  consistent  with  the  proposed  space-time  coordinates,  coordinate  times 
would  be  specified  such  that: 

(1)  The  units  of  measurement  of  the  coordinate  times  of  all  coordinated  systems 
centered  at  the  barycenters  of  ensembles  of  masses  are  chosen  so  that  they 
are  consistent  with  the  proper  unit  of  time,  the  SI  second. 


46 


EXPLANATORY  SUPPLEMENT 


(2)  The  reading  of  these  coordinate  times  is  1977  January  I,  0h0m32M84  exactly, 
on  January  1,  0h0m0B  TAI  exactly  (JD  =  2443144.5,  TAI),  at  the  geocenter. 

(3)  Coordinate  times  in  coordinate  systems  that  have  their  spatial  origins  at 
the  center  of  mass  of  the  Earth  and  at  the  solar  system  barycenter  and 
that  meet  the  previously  stated  requirements  are  designated  as  Geocen- 
tric Coordinate  Time  (TCG)  and  Barycentric  Coordinate  Time  (TCB), 
respectively. 


TCG  and  TCB  were  adopted  by  the  IAU  in  1991.  They  are  in  a  way  com- 
plementary to  TDT  and  TDB.  but  it  must  be  recognized  that  some  astronomical 
constants  and  quantities  have  different  numerical  values  when  using  TDB,  as  op- 
posed to  TDT,  TCG,  or  TCB.  It  should  further  be  noted  concerning  TCB  and 
TCG  that: 


(1)  In  the  domain  common  to  any  two  coordinate  systems,  the  tensor  transfor- 
mation law  applied  to  the  metric  tensor  is  valid  without  repealing  the  unit 
of  time.  Therefore  the  various  coordinate  times  exhibit  secular  variations. 
Recommendation  5  (1976)  of  IAU  Commissions  4,  8,  and  31,  completed 
by  Recommendation  5  (1979)  of  IAU  Commissions  4,  19,  and  31,  stated 
that  Terrestrial  Dynamical  Time  (TDT)  and  Barycentric  Dynamical  Time 
(TDB)  should  differ  only  by  periodic  variations.  Therefore  TDB  and  TCB 
differ  in  rate.  The  relationship  between  these  timescales  in  seconds  is  given 
by: 

TCB  -  TDB  =  LB  x  (JD  -  2443144. 5)  x  86400  (2.223-2) 


The  present  estimate  of  the  value  of  LB  is  1.  550505  x  10~s  (+  1  x  tO"14). 
(2)  The  relation  TCB  —  TCG  involves  a  full  four-dimensional  transformation: 


TCB  -  TCG  =  c~2 


f 

J  to 


(vl/2+  E/ext(xE)) dt  +  vc  ■  (x  -  xe) 


(2.223-3) 


Xf  and  ve  denote  the  barycentric  position  and  velocity  of  the  Earth's  center 
of  mass,  and  X  is  the  barycentric  position  of  the  observer.  The  external 
potential,  Utu,  is  the  Newtonian  potential  of  all  solar  system-bodies  apart 
from  the  Earth.  The  external  potential  must  be  evaluated  at  the  geocenter. 
In  the  integral,  /  =  TCB  and  is  chosen  to  agree  with  the  epoch  of  Ter- 
restrial Time  (TT).  As  an  approximation  to  TCB  —  TCG  in  seconds  one 
might  use: 


TCB -TCG  =  Lc  x  (JD- 2443 144. 5)  x  86400+c^2ve-(x-xe)+/".  (2.223-4) 

The  present  estimate  of  the  value  of  Lc  is  1.480813  x  10"8  (±  1  x  10-14). 
The  quantity  P  represents  the  periodic  terms  which  can  be  evaluated  using 
analytical  formulas.  For  observers  on  the  surface  of  the  Earth,  the  terms 


2  /  TIME 


47 


depending  upon  their  terrestrial  coordinates  are  diurnal,  with  a  maximum 
amplitude  of  2.1  (is. 

(3)  The  origins  of  coordinate  times  have  been  arbitrarily  set  so  that  these  times 
all  coincide  with  the  Terrestrial  Time  (TT)  at  the  geocenter  of  1977  January 
1,  0"0m0a  TAI. 

(4)  When  realizations  of  TCB  and  TCG  are  needed,  it  is  suggested  that  these 
realizations  be  designated  by  expressions  such  as  TCB(jccr),  where  xxx  in- 
dicates the  source  of  the  realized  timescale  (e.g.,  TAI)  and  the  theory  used 
for  transformation  into  TCB  or  TCG. 

In  addition,  it  was  agreed  to  delete  the  word  "dynamical"  from  Terrestrial 
Dynamical  Time  (TDT)  and  just  call  it  Terrestrial  Time  (TT).  TT  would  be  defined 
as  follows: 

(1)  The  time  reference  for  apparent  geocentric  ephemerides  is  Terrestrial  Time, 
TT. 

(2)  Terestrial  Time  is  a  timescale  differing  from  TCG  uniquely  by  a  constant 
rate,  its  unit  of  measurement  being  chosen  so  that  it  agrees  with  the  SI 
second  on  the  geoid. 

(3)  At  instant  1977  January  1,  0h0m0s  TAI  exactly,  TT  has  the  reading  1977 
January  1,  0h0m32!184  exactly. 

It  should  be  noted  concerning  TT  that: 

(1)  The  divergence  between  TAI  and  TT  is  a  consequence  of  the  physical  de- 
fects of  atomic  time  standards.  In  the  interval  1977-1990,  in  addition  to 
the  constant  offset  of  32!  184,  the  deviation  probably  remained  within  the 
approximate  limits  of  ±  10  (is.  It  is  expected  to  increase  more  slowly  in  the 
future  as  a  consequence  of  improvements  in  time  standards.  In  many  cases, 
especially  for  the  publication  of  ephemerides,  this  deviation  is  negligible. 
In  such  cases,  it  can  be  stated  that  the  argument  of  the  ephemerides  is 
TAI +  32!  184. 

(2)  Terrestrial  Time  differs  from  TCG  in  seconds  uniquely  by  a  scaling  factor: 

TCG  -  TT  =  Lc  x  ( JD  -  2443 144. 5)  x  86400  (2.223-5) 

The  present  estimate  of  the  value  of  LG  is  6.969291  x  10"10  (±  3  x  10"16). 
The  two  timescales  are  distinguished  by  different  names  to  avoid  scaling 
errors. 

(3)  The  unit  of  measurement  of  TT  is  the  SI  second  on  the  geoid.  The  usual 
multiples,  such  as  the  TT  day  of  86400  SI  seconds  on  the  geoid,  and  the  TT 
Julian  century  of  36525  TT  days  can  be  used,  provided  that  the  reference 
to  TT  be  clearly  indicated  whenever  ambiguity  may  arise.  Corresponding 
time  intervals  of  TAI  are  in  agreement  with  the  TT  intervals  within  the 


48  EXPLANATORY  SUPPLEMENT 

uncertainties  of  the  primary  atomic  standards  (e.g.,  within  +  2  x  10^ 14  in 
relative  value  during  1990). 
(4)  It  is  suggested  that  realizations  of  TT  be  designated  by  TT(xtr),  where  xxx 
is  an  identifier.  In  most  cases,  a  convenient  approximation  is: 

TT(TAI)  =  TAI  +  32?  184  (2.223-6) 

However,  in  some  applications  it  may  be  advantageous  to  use  other  realiza- 
tions. The  BIPM,  for  example,  has  issued  timescales  such  as  TT  (BIPM90) 

The  concepts  were  adopted  by  IAU  resolution  and  will  probably  be  implemented 
into  general  use  in  the  future.  There  is  an  Astronomical  Standards  Working  Group 
currently  considering  various  details  of  interpretation  and  implementation. 


2.23   Sidereal  Time 

In  general  terms,  sidereal  time  is  the  hour  angle  of  the  vernal  equinox,  which  is  also 
known  as  the  first  point  of  Aries.  Apart  from  the  inherent  motion  of  the  equinox,  due 
to  precession  and  nutation,  sidereal  time  is  a  direct  measure  of  the  diurnal  rotation 
of  the  Earth.  Equal  intervals  of  angular  motion  correspond  to  equal  intervals  of 
mean  sidereal  time,  so  that  sidereal  time  reflects  the  actual  rotation  of  the  Earth, 
and  can  be  determined  by  observations  of  celestial  objects. 

The  sidereal  time  measured  by  the  horn  angle  of  the  true  equinox — i.e.,  the 
intersection  of  the  true  equator  of  date  with  the  ecliptic  of  date — is  apparent  sidereal 
time.  The  position  of  the  true  equinox  is  affected  by  the  nutation  of  the  axis  of 
the  Earth,  which  consequently  introduces  periodic  inequalities  into  the  apparent 
sidereal  time.  The  time  measured  by  the  diurnal  motion  of  the  mean  equinox  of 
date,  which  is  affected  by  only  the  secular  inequalities  due  to  the  precession  of 
the  axis,  is  mean  sidereal  time.  Apparent  sidereal  time  minus  mean  sidereal  time 
is  the  equation  of  the  equinoxes.  In  ephemerides  immediately  preceding  1960,  the 
equation  of  the  equinoxes  was  called  the  nutation  in  right  ascension. 

The  period  between  two  consecutive  upper  meridian  transits  of  the  equinox  is  a 
sidereal  day.  It  is  reckoned  from  0h  at  upper  transit,  which  is  known  as  sidereal  noon. 
Owing  to  precession,  the  mean  sidereal  day  of  24  hours  of  mean  sidereal  time  is 
shorter  than  the  actual  period  of  rotation  of  the  Earth  by  about  0!0084,  the  amount 
of  precession  in  right  ascension  in  one  day.  The  ratio  of  the  length  of  the  mean 
sidereal  day  to  the  period  of  rotation  of  the  Earth  is  0. 999999902907  —  59  x  10-12  T, 
where  T  is  measured  in  Julian  centuries  from  J2000.0.  Correspondingly,  the  period 
of  rotation  is  1.000000097093  +  59  Tx  10  12  mean  sidereal  days.  These  numbers  are 
not  rigorously  constant  because  the  sidereal  motion  of  the  equinox  due  to  precession 
is  proportional  to  the  length  of  the  UT  day,  that  is,  to  the  period  of  the  rotation 
of  the  Earth,  whereas  the  angular  measure  of  the  complete  rotation  is,  of  course, 


2  /  TIME 


49 


constant.  However,  the  conceivable  change  in  the  period  of  rotation  is  such  that  the 
effect  of  a  variation  in  the  daily  precessional  motion  is  inappreciable.  The  secular 
variations  are  almost  inappreciable  (see  Section  3.21).  The  apparent  sidereal  day, 
nominally  of  24  hours  of  apparent  sidereal  time,  differs  from  the  period  of  rotation 
by  a  variable  amount  depending  on  the  nutation. 

To  each  local  meridian  on  the  Earth  there  corresponds  a  local  sidereal  time, 
connected  with  the  sidereal  time  of  the  Greenwich  meridian  by  means  of  the  relation: 

local  sidereal  time  =  Greenwich  sidereal  time  +  east  longitude.  (2.23-1) 

Sidereal  time  is  conventionally  measured  in  hours,  minutes,  and  seconds,  so  that 
longitude  is  measured  (positively  to  the  east)  in  time  at  the  rate  of  one  hour  to  15°. 
An  object  transits  over  the  local  meridian  when  the  local  sidereal  time  is  equal  to 
its  right  ascension. 

Classically,  sidereal  time  was  determined  from  observations  of  the  transits  of 
stars,  either  over  the  local  meridian  or,  with  a  prismatic  astrolabe,  over  the  small 
circle  corresponding  to  a  constant  altitude.  Because  the  reduction  of  these  observa- 
tions depended  on  star  positions  taken  from  a  standard  star  catalog,  sidereal  time 
was  actually  based  on  the  hour  angle  of  the  zero  point  of  right  ascension  of  the 
catalog,  known  as  the  catalog  equinox.  This  point  is  distinct  from  (but  close  to)  the 
dynamical  equinox  defined  by  the  orbital  motion  of  the  Earth  (see  Section  3.1). 

Apparent  sidereal  time,  because  of  its  variable  rate,  is  used  only  as  a  measure 
of  epoch;  it  is  not  used  as  a  measure  of  time  interval.  Observations  of  the  diurnal 
motions  of  the  stars  provide  a  direct  measure  of  apparent  sidereal  time,  as  their 
right  ascensions  are  measured  from  the  true  equinox.  But  in  many  practical  methods 
of  determining  time,  the  right  ascensions  are  diminished  by  the  equation  of  the 
equinoxes,  so  that  mean  sidereal  time  is  deduced  directly  from  the  observations. 

Today,  sidereal  time  is  determined  most  accurately  by  interferometer  obser- 
vations of  radio  sources.  It  can  also  be  determined  from  lunar  and  satellite  laser- 
ranging.  Since  the  rotation  of  the  Earth  is  subject  to  irregular  forces,  sidereal  time 
is  irregular  with  respect  to  atomic  time.  The  practical  determination  of  sidereal 
time  requires  that  short-period  irregularities  and  polar  motion  be  evaluated  at  the 
same  time. 

2.231  Greenwich  Sidereal  Date  In  order  to  facilitate  the  enumeration  of  succes- 
sive sidereal  days,  the  concepts  of  Greenwich  sidereal  date  and  Greenwich  sidereal 
day  number,  analogous  to  those  of  Julian  date  and  Julian  day  number  (see  Sec- 
tion 2.26),  have  been  introduced.  The  Greenwich  sidereal  date  is  defined  as  the 
interval  in  sidereal  days,  determined  by  the  equinox  of  date,  that  has  elapsed  on 
the  Greenwich  meridian  since  the  beginning  of  the  sidereal  day  that  was  in  progress 
at  JD  0.0.  The  integral  part  of  the  Greenwich  sidereal  date  is  the  Greenwich  sidereal 
day  number,  a  count  of  transits  of  the  equinox  over  the  Greenwich  meridian.  The 


50  EXPLANATORY  SUPPLEMENT 

decimal  part  of  the  Greenwich  sidereal  date  is  simply  the  Greenwich  sidereal  time 
expressed  as  a  fraction  of  a  sidereal  day.  These  concepts  can  be  applied  equally  well 
to  mean  or  apparent  sidereal  time. 


2.24   Universal  Time 

Universal  Time  (UT)  is  the  measure  of  time  used  as  the  basis  for  all  civil  time- 
keeping. It  conforms  closely  to  the  mean  diurnal  motion  of  the  Sun.  The  apparent 
diurnal  motion  of  the  Sun  involves  both  the  nonuniform  diurnal  rotation  of  the 
Earth  and  the  motion  of  the  Earth  in  its  orbit  around  the  Sim.  Although  it  would 
be  possible  to  define  a  system  of  time  measurement  in  terms  of  the  hour  angle  of 
the  Sun,  such  a  system  could  never  be  related  precisely  to  sidereal  time  and  could 
not,  therefore,  be  determined  by  observations  of  star  transits.  As  a  result,  Universal 
Time  is  directly  related  to  sidereal  time  by  means  of  a  numerical  formula.  It  does 
not  refer  to  the  motion  of  the  Earth  and  is  not  precisely  related  to  the  hour  angle 
of  the  Sun. 

Universal  Time  at  any  instant  can  be  derived  from  observations  of  the  diurnal 
motion  of  the  stars  or  radio  sources.  The  uncorrected  observed  rotational  timescale, 
which  is  dependent  on  the  place  of  observation,  is  designated  UTO.  Correcting  this 
t  imescale  for  the  shift  in  longitude  of  the  observing  station  caused  by  polar  motion 
produces  the  UTl  timescale,  which  is  independent  of  observing  location,  but  is 
influenced  by  the  slightly  variable  rotation  of  the  Earth. 

Since  1984  January  1  Greenwich  mean  sidereal  time  (GMST)  has  been  related 
to  UTl  as  follows: 

GMSTI  of  0hUTJ  =24110!54841  +86401 84?8 12866  Ta+  fr!093104  7^  -6.2  x  1(T67^ 

(2.24-1) 

where  Tu  -  du  I  36525,  du  is  the  number  of  days  of  Universal  Time  elapsed  since 
JD  2451545.0  UTl  (2000  January  1,  12hUTl),  taking  on  values  of  ±  0.5,  ±  1.5, 

±  2. 5,  ±  3.  5,   This  relation  conforms  to  the  position  and  motion  of  the  equinox 

specified  in  the  IAU  1976  System  of  Astronomical  Constants,  the  1980  IAU  Theory 
of  Nutation,  and  the  positions  and  proper  motions  of  stars  in  the  FK5  catalog. 

Equation  2.24-1  is  often  considered  to  be  the  definition  of  UTl,  because  when 
it  was  established,  the  observation  of  transits  of  the  FK5  stars  (or  of  other  stars 
with  their  positions  and  proper  motions  in  the  FK5  system)  was  the  best  means 
to  obtain  UTl.  When  new  techniques  for  measuring  UTl  became  operational  (see 
Section  2.32),  the  arbitrary  constants  involved  in  their  implementation  were  set  to 
align  I  he  111  values  with  those  obtained  by  observations  of  FK5  stars  and  to  be 
consistent  with  Equation  2.24  1. 

The  modern  definition  of  UTl  was  established  in  order  to  fulfill  the  following 
conditions: 


2  /  TIME  51 

(a)  UTl  is  proportional  to  the  angle  of  rotation  of  the  Earth  in  space,  reck- 
oned around  the  true  position  of  the  rotation  axis.  In  other  words,  UTl  is 
proportional  to  the  integral  of  the  modulus  of  the  rotation  vector  of  the 
Earth. 

(b)  The  rate  of  UTl  is  chosen  so  that  the  day  of  UTl  is  close  to  the  mean 
duration  of  the  solar  day. 

(c)  The  phase  of  UTl  is  chosen  so  that  12h  UTl  corresponds  approximately,  in 
the  average,  to  the  instant  when  the  Sun  crosses  the  meridian  of  Greenwich. 

Conditions  (b)  and  (c)  are  not  strictly  compatible  with  condition  (a).  By  adopt- 
ing (a),  one  accepts  that  UTl  deviates  secularly  from  solar  time;  however,  the 
divergence  is  extremely  small. 

The  constant  term  and  the  numerical  coefficient  of  7"„  in  Equation  2.24-1  were 
chosen  so  that  UTl  would  be  continuous  in  value  and  rate  through  the  change  from 
the  old  to  the  new  system  of  constants  (1984  January  1).  The  small  differences  due 
to  the  change  in  the  theory  of  nutation  were  neglected. 

The  variation  of  UTl  with  respect  to  uniform  time  truly  represents  the  irreg- 
ularities of  the  rotation  of  the  Earth.  The  duration  (A)  of  the  day  of  UTl  in  SI 
seconds  is  given  by 

A  =  86400  n,  (2.24-2) 

where  Vi  and  are  the  values  of  UTl  -  TAI  in  seconds  at  n-day  intervals.  The 
angular  velocity  of  the  Earth,  w,  is  given  by 

u  =  (86400  /  A)x  72. 921 15 1467  x  10_6rads_1.  (2.24-3) 

For  the  dynamics  of  the  solar  system,  the  study  of  the  rotation  of  the  Earth,  and  the 
study  of  the  Galaxy,  one  needs  the  relationship  between  the  position  and  motion 
of  the  equinox  and  those  of  a  point  on  the  equator,  the  hour  angle  of  which  truly 
represents  the  rotation  of  the  Earth  in  space  (sidereal  rotation).  There  are  several 
ways  to  establish  this  relationship,  including  using  statistics  on  the  proper  motions 
of  stars,  the  dynamical  method,  and  observations  of  quasars;  these  lead  to  slightly 
different  realizations  of  the  equinox  and,  therefore,  of  the  sidereal  time.  Therefore, 
an  agreement  has  been  made  to  take  as  a  reference  the  equinox  and  its  motion  as 
realized  by  the  IAU  1976  System  of  Astronomical  Constants,  the  1980  IAU  Theory 
of  Nutation,  and  the  positions  and  proper  motions  of  stars  of  the  FK5  catalog. 

2.241  Conversions  between  Universal  Time  and  Sidereal  Time  The  number  of  sec- 
onds of  sidereal  time  in  a  Julian  century  can  be  obtained  by  direct  differentiation 
of  Equation  2.24-1: 


s'  =  8640184.812866  +  0.  1862087-  ].86x  10~5  T2. 


(2.241-1) 


52  EXPLANATORY  SUPPLEMENT 

Dividing  by  36525  (the  number  of  days  in  a  Julian  century)  gives  the  number  of 
seconds  of  mean  sidereal  time  in  a  day  of  Universal  Time  (UT1  to  be  precise): 

s  =  86636*55536790872  +  5. 098097  x  10~6r  -  5. 09  x  10"  ,0T2  (2.241  2) 

where  T  is  the  number  of  Julian  centuries  elapsed  since  JD  2451545.0.  The  quantity 
s  represents  the  number  of  sidereal  seconds  in  a  day  of  Universal  Time.  Dividing 
Equation  2.241-2  by  86400  gives  the  ratio  of  mean  sidereal  time  to  UTl: 

r'  =  1.002737909350795  +  5.9006  x  10_11r-  5.9  x  10_157;2.  (2.241-3) 

Taking  the  inverse  of  this  expression  gives  the  ratio  of  UTl  to  mean  sidereal  time: 

I  //  =  0.997269566329084  -5. 8684  x  10  1  ]T+5. 9  x  10"  l5T2.  (2.241-1) 

Although  the  lengths  of  a  day  of  UTl  and  a  day  of  mean  sidereal  time  vary 
slightly  with  variations  in  the  Earth's  rotation,  the  ratio  of  UTl  to  mean  sidereal 
time  is  given  by  Equation  2.241-4  and  is  unaffected  by  rotational  variations.  Thus, 
the  established  method  of  determining  Universal  Time  by  multiplying  an  interval 
of  sidereal  time  elapsed  from  0h  UT  by  a  fixed  conversion  factor  maintains  the 
constancy  of  the  ratio  of  Universal  Time  to  sidereal  time,  irrespective  of  variations 
in  the  rate  of  rotation  of  the  Earth. 

Roughly  speaking,  UTl  can  be  regarded  as  solar  time  or  dynamical  time  in 
these  equations.  Then  Equation  2.241-4  can  be  thought  of  as  giving  the  length 
of  one  sidereal  day  in  units  of  solar  days.  Disregarding  the  inappreciable  secular 
variations,  the  equivalent  measures  of  the  lengths  of  the  days  are: 

mean  sidereal  day  =  23h56m04?090524  of  Universal  Time, 
day  of  Universal  Time  -  24"03m56*5553678  of  mean  sidereal  time. 

The  rotational  period  of  the  Earth  is  86164.09890369732  seconds  of  UTl  or 
23h56mO4!09890369732.  This  gives  a  ratio  of  a  UTl-day  to  the  period  of  rotation 
of  1.00273781 1906.  The  rate  of  rotation  is  15.04106717866910  seconds  of  arc  per 
second  of  time. 

2.242  Conversion  of  Local  Apparent  Sidereal  Time  to  UTl  The  usual  procedure 
to  express  the  UTl  date  of  an  event  that  occurred  at  some  instant  dated  in  local 
apparent  sidereal  time  (LAST)  is  as  follows: 

(a)  Express  the  date  in  local  mean  sidereal  time  (LMST)  by 


LMST  =  LAST  -  EQ, 


(2.242-1) 


2  /  TIME 


53 


where  EQ  is  the  equation  of  the  equinoxes. 

(b)  Express  the  date  in  Greenwich  mean  sidereal  time  by 

GMST1  =  LMST  -  A,  (2.242-2) 

where  A  is  the  astronomical  longitude  of  the  instrument,  positive  toward 
the  east.  Since  the  pole  of  rotation  is  moving  with  respect  to  the  surface 
of  the  Earth,  the  instrumental  meridian  is  subject  to  small  variations.  The 
position  of  the  rotational  pole  (jc,y)  with  respect  to  the  Conventional  Inter- 
national Origin  (CIO)  can  be  used  to  correct  for  this  effect.  This  correction 
of  Ao  (referred  to  CIO)  to  A  is  accomplished  by  applying  the  expression 

A  =  A0  -  (x  sin  A0  +  y  cos  A0)  tan  <p  (2.242-3) 

where  4>  is  the  latitude  of  the  instrument. 

(c)  Compute  the  time  9  elapsed  between  0h  UTl  and  the  event,  expressed  in 
mean  sidereal  time  by 

9  =  GMST1  -  GMST1  of  0hUTl .  (2.242-4) 

(d)  Convert  9,  expressed  as  an  interval  of  sidereal  time,  to  an  interval  of  UTl: 

UTl  =  rd  (2.242-5) 

where  r  is  the  ratio  of  mean  solar  time  to  sidereal  time  intervals,  given  in 
Equation  2.241-4. 

For  instance  when  the  hour  angle,  H,  of  a  star  with  right  ascension  a  has  been 
measured,  the  corresponding  UTl  value  is 

UTl  =  (H  +  a-EQ-X-  GMST1  of  0hUTI)r.  (2.242-6) 
The  relationship  between  LMST  and  local  civil  time  (LCT)  is  given  by 

LMST  of  0"  LCT  =  GMST1  of  0"  UTl  -  (1  -  r)A  /  r,  (2.242-7) 
where  LCT  =  UTl  +  A,  and  GMST1  of  0"  UTl  is  obtained  from  Equation  2.24-1. 

2,243    Coordinated  Universal  Time     Since  1972  January  1,  most,  and  now  all,  broad- 
cast time  services  distribute  timescales  based  on  the  redefined  Coordinated  Univer- 
sal Time  (UTC),  which  differs  from  TAI  by  an  integer  number  of  seconds.  UTC  is 
maintained  within  0.90  second  of  UTl  by  the  introduction  of  one-second  steps  (leap 


54  EXPLANATORY  SUPPLEMENT 

seconds)  when  necessary,  usually  at  the  end  of  June  or  December.  DUT1,  an  ex- 
trapolation of  the  difference  UTl  minus  UTC,  is  transmitted  in  code  on  broadcast 
time  signals. 


2.25   The  Ephemeris  Meridian 

Since  hour  angles  are  calculated  with  reference  to  the  meridian  of  Greenwich  or 
other  geographic  meridians,  they  are  dependent  on  the  rotation  of  the  Earth.  For 
solar-system  bodies,  whose  motions  are  expressed  as  a  function  of  dynamical  time, 
such  calculations  can  only  be  carried  out  accurately  after  a  value  of  AT"  (  =  TDT  — 
UT)  is  known.  To  facilitate  practical  calculations  of  phenomena  that  depend  upon 
hour  angle  and  geographic  location,  the  concept  of  an  auxiliary  reference  meridian, 
known  as  the  ephemeris  meridian,  was  introduced. 

Although  the  ephemeris  meridian  was  originally  used  in  conjunction  with  ephem- 
eris time,  its  name  has  been  retained  for  use  with  calculations  in  TDT.  Its  position 
in  space  is  conceived  as  being  where  the  Greenwich  meridian  would  be  if  the  Earth 
rotated  uniformly  at  the  rate  implicit  in  the  definition  of  dynamical  time;  i.e., 
1.002738A77  east  of  the  actual  meridian  of  Greenwich  on  the  surface  of  the  Earth, 

Calculations  in  terms  of  TDT  may  be  referred  to  the  ephemeris  meridian  us- 
ing methods  that  are  formally  the  same  as  those  done  in  UT,  when  referred  to 
the  Greenwich  meridian.  As  soon  as  a  sufficiently  accurate  value  of  AT  can  be 
determined  or  extrapolated,  the  longitudes  and  hour  angles  can  be  referred  to  the 
Greenwich  meridian,  and  the  times  in  TDT  can  be  expressed  in  UT.  This  procedure 
is  followed,  for  example,  in  predictions  of  the  general  circumstances  of  eclipses. 

Equation  2.24-1  gives  the  hour  angle  of  the  equinox  at  0h  UT,  referred  to  the 
actual  geographic  meridian  of  Greenwich.  However,  if  T  is  expressed  in  dynamical 
time  rather  than  Universal  Time,  Equation  2.24-1  gives  the  hour  angle  of  the 
equinox  at  0h  TDT,  referred  to  the  ephemeris  meridian. 

The  Universal  Time  of  transit  of  the  Sun,  Moon,  or  a  planet  across  the  meridian 
of  Greenwich  can  be  found  by  subtracting  AT  from  the  dynamical  time  of  Green- 
wich transit.  To  determine  the  dynamical  time  of  Greenwich  transit,  the  tabulated 
time  of  transit  across  the  ephemeris  meridian  must  be  interpolated  from  the  ge- 
ographic longitude  of  the  ephemeris  meridian  (1.002738 AT  east)  to  longitude  0°. 
The  Universal  Time  of  Greenwich  transit  is  given  approximately  by 

UT  of  Greenwich  transit  =  TDT  of  ephemeris  transit  +  (AT  /  h)Aa,  (2.25-1) 

where  Aa  is  the  first  difference  in  tabular  right  ascension  and  h  is  the  tabular 
interval. 

It  is  possible  to  define  hour  angles,  sidereal  time,  and  an  equation  of  time  with 
respect  to  the  ephemeris  meridian.  But  to  relate  such  a  system  to  observations 
from  the  surface  of  the  Earth,  the  value  of  AT"  is  required.  It  is  more  convenient 


2  /  TIME 


55 


Ephemeris  meridian  Local  meridian  True  Sun  Equinox 


1.002738  AT 
k  —  ) 

12h  +UT 

— > 

Equation  of  time 

3cal  hour  angle  of  Sun 
 > 

Right  ascension  of  Sun 

Longitude 
Hour  angle  of  Sun 

L 

 s 

Sidereal  time 

 ! 

Universal  meridian       Mean  Sun  of  UT 
(Greenwich) 

Figure  2.25.1 

Meridian  relations  and  time 


and  conventional  to  convert  TDT  to  UT  by  means  of  AT  and  to  relate  hour  angles, 
longitudes,  and  times  to  the  Greenwich  meridian. 

The  speed  of  rotation  of  the  ephemeris  meridian  is  such  that  it  makes  one 
complete  revolution  of  360°,  relative  to  the  mean  equinox,  in  23h56m04!098904  of 
dynamical  time.  The  ephemeris  meridian  coincided  with  the  Greenwich  meridian 
at  some  date  between  1900  and  1905. 

Apart  from  its  practical  advantages,  the  concept  of  the  ephemeris  meridian 
is  valuable  in  providing  a  clear  picture  of  the  relation  between  dynamical  time 
and  Universal  Time.  Figure  2.25.1  shows  the  relationship  between  the  ephemeris 
meridian  and  the  universal  (or  Greenwich)  meridian.  It  also  shows  the  relationships 
between  the  local  meridian,  the  equinox,  and  the  true  and  mean  Sun. 


2.26  Julian  Date 

To  facilitate  chronological  reckoning,  astronomical  days,  beginning  at  Greenwich 
noon,  are  numbered  consecutively  from  an  epoch  intended  to  be  sufficiently  far  in 
the  past  to  precede  the  historical  period.  The  number  assigned  to  a  day  in  this 
continuous  count  is  the  Julian  day  number,  which  is  defined  to  be  0  for  the  day 
starting  at  Greenwich  mean  noon  on  1  January  4713  B.C.,  Julian  proleptic  calendar. 
The  Julian  day  number  therefore  denotes  the  number  of  days  that  has  elapsed,  at 
Greenwich  noon  on  the  day  designated,  since  the  preceding  epoch.  The  Julian  date 
(JD)  corresponding  to  any  instant  is,  by  a  simple  extension  of  this  concept,  the 


56  EXPLANATORY  SUPPLEMENT 

Julian  day  number  followed  by  the  fraction  of  the  day  elapsed  since  the  preceding 
noon. 

Julian  dates  can  be  expressed  in  Universal  Time  or  dynamical  time,  though  the 
timescale  should  be  specified  if  precision  is  of  concern.  A  Julian  date  expressed  in 
UT  will  differ  by  AT  from  the  same  date  expressed  in  TDT.  It  is  not  necessary  to 
know  the  exact  difference  between  dynamical  and  Universal  Time  when  specifying 
the  Julian  day  number  in  dynamical  time.  The  timescale,  when  it  needs  to  be 
specified,  should  be  given  after  the  Julian  date;  e.g.,  JD  2451545.0  TDT. 

Prior  to  1984,  the  term  Julian  ephemeris  date  (JED)  was  used  to  distinguish  the 
Julian  date  in  ephemeris  time,  with  the  day  beginning  at  12h  ET,  from  the  Julian 
date  in  Universal  Time,  with  the  day  beginning  at  12"  UT,  The  Julian  ephemeris 
date  is  equivalent  to  the  Julian  date  in  Terrestrial  Dynamical  Time. 

The  fundamental  epochs  of  celestial  reference  coordinate  systems  are  properly 
on  Barycentric  Dynamical  Time  (TDB).  Thus  J2000.0  is  2000  January  1.5  TDB, 
which  is  JD  2451545.0  TDB. 

In  timekeeping  laboratories,  for  many  space  activities,  and  for  other  applica- 
tions, a  Modified  Julian  Date  is  often  used.  It  is  defined  by  MJD  =  JD  -  2400000.  5. 
Thus  a  day  of  MJD  begins  at  midnight  of  the  civil  day.  The  timescale  should  be 
specified  when  precision  matters,  e.g.,  MJD  47479.25  TAI.  Note  that  MJD  is  used 
in  Table  2.58.1  (page  86). 

2.27  Time  Zones 

Universal  Time  is  equivalent  to  the  standard  time  for  0°  longitude,  which  is  defined 
to  be  the  meridian  through  Greenwich,  England.  A  worldwide  system  of  standard 
time  zones  is  based  on  15°  (i.e.,  one  hour)  increments  in  longitude.  These  standard 
time  zones  are  identified  with  letter  designations,  in  addition  to  appropriate  names. 
Thus  the  standard  time  zone  for  0°  longitude  is  labeled  Z.  The  standard  time  zone 
for  15°  east  longitude  is  labeled  A.  Subsequent  letters  designate  zones  increasing 
eastward  in  15°  increments,  with  M  designating  the  zone  for  180°  east.  The  time 
zone  for  west  15°  is  labeled  N,  with  letters  progressing  to  Ffor  180°  west  longitude. 

In  practice,  however,  each  country  selects  the  appropriate  time  zone,  or  zones, 
for  itself.  The  exact  zone  boundaries  within  each  country  are  determined  through 
that  country's  internal  political  process.  In  addition,  some  countries  disregard  the 
aforementioned  convention  by  adopting  a  zone  on  a  fraction  of  an  hour.  Many  coun- 
tries also  adopt  daylight  saving  time,  sometimes  called  summer  time  or  advanced 
time,  which  is  generally  one  hour  in  advance  of  the  standard  time  normally  kept 
in  that  zone.  The  dates  for  changing  to  and  from  daylight  saving  time  vary  among 
the  countries;  a  few  countries  retain  advanced  time  all  year. 

Figure  2.27.1  is  a  world  map  of  the  different  time  zones.  Since  the  zones  adopted 
by  individual  countries  are  subject  to  change,  details  of  the  map  may  become  ob- 
solete. 


Figure  2.27.1 

World  map  of  time  zones 


58  EXPLANATORY  SUPPLEMENT 

2.3    PRACTICAL  DETERMINATIONS  OF  TIME 


Today,  International  Atomic  Time  (TAI)  represents  the  most  precise  achievable 
determination  of  time.  This  timescale  is  completely  determined  by  applying  the 
methods  of  physics  to  the  determination  of  time.  However,  we  live  and  make  astro- 
nomical observations  on  the  surface  of  the  rotating  Earth;  thus,  it  is  necessary  to 
relate  TAI  to  the  less  consistent  timescale  determined  from  the  Earth's  rotation. 

The  most  recent  information  on  time  standards  and  methods  of  disseminating 
time  and  frequency  is  given  in  the  volumes  of  Proceedings  of  the  Precise  Time  and 
Time  Interval  (PTTI)  Applications  and  Planning  Meeting  and  the  documents  of 
CCIR  Study  Group  7.  A  review  of  frequency  standards  was  given  by  Audoin  (1984). 


2.31    Frequency  Standards  and  Clock  Performance 

To  produce  uniform  time  intervals,  a  clock  must  generate  a  frequency  that  is  accu- 
rately known  with  respect  to  a  standard.  The  standard  frequency  for  atomic  time 
was  established  by  Markowitz  et  al.  (1958),  who  measured  the  resonance  frequency 
of  Cesium  in  terms  of  the  ephemeris  second.  The  currently  adopted  standard  is  a 
liyperfine  transition  of  the  Cesium-133  atom  (F  =  3,  MF  =  0  to  F  =  4,  MF  =  0),  which 
is  assumed  to  be  9192631770  Hz  in  a  magnetic  field  of  H  =  0.  A  description  of  the 
physics  involved  and  a  review  of  frequency  standards  are  given  by  Mockler  (1961), 
Beehler  et  al.  (1965),  and  Vanier  and  Audoin  (1989). 

No  clock  is  perfect.  Since  all  clocks  are  subject  to  random-noise  rate  variations 
and  systematic  effects,  a  perfect  clock  is  an  ideal  that  can  only  be  approached, 
but  not  reached.  Improvements  in  clock  performance  require  improvements  in  the 
signal-to-noise  ratio  of  the  carrier  power  to  phase-side-band  power.  Given  these 
facts,  it  is  necessary  to  be  able  to  specify  clock  performance. 

We  first  consider  a  clock  as  a  generator  of  a  nearly  sinusoidal  signal  voltage: 

V(t)  =  [V0  +  e(f)]  sin  $(/).  (2.31-1) 

For  our  purposes,  e(t)  will  be  very  small  or  will  vary  slowly  and  we  can  ignore  it  for 
most  timing  applications;  t  is  the  ideal  time  or  the  time  of  a  reference  clock.  We 
can  write  for  the  instantaneous  phase 

$(r)  =  Qr  +  0(f),  (2.31-2) 


where 


(2.31-3) 


2  /  TIME  59 

is  the  ideal  or  reference  frequency,  £1  the  circular  frequency  in  rad/s,  and  0(f)  the 
phase  error  of  the  clock.  The  clock  error  is  then 

x(0  =  0(0 /£X  (2.31-4) 
and  the  instantaneous  normalized  frequency  error  is 

dx    „  ,  dS(i) 

'"IT  <2'31-5> 

The  average  normalized  frequency  error  between  f[  and  t2  is  given  by 
.     x(t2)-x(t])         1  Z"1 

y=  — :  :  =  :  r  /    y(t)<*t.  (2.31-6) 


All  measures  of  clock  performance  will  be  related  to  y(0  or  x(t),  with  age,  envi- 
ronmental conditions,  etc.,  as  qualifying  parameters.  However,  for  various  reasons, 
frequency  aspects  y(t)  have  been  emphasized  over  accumulated  clock  error  x(t).  The 
basic  problem  in  any  measure  of  clock  performance  is  the  fact  that  x{i)  as  well  as 
y(0  may  be  unbounded  as  t  goes  to  infinity. 

For  details  of  characterization  of  clock  performance  see  Allan  (1985),  Barnes 
(1976),  Allan  (1983),  Jenkins  and  Watts  (1968),  and  Loeb  (1972). 


2.3 1 1  'types  of  Clock  Noise  Various  types  of  random  clock  disturbances  have  been 
recognized.  Some  of  these  are  called  white  phase  noise,  white  rate  noise,  and  random 
walk  in  rate.  Barnes  and  Allan  (1964)  recommended  measures  of  clock  performance 
that  do  not  depend  critically  on  data  length  or  the  cut-off  frequencies  in  the  per- 
formance of  drifts.  One  solution  is  to  take  the  average  of  the  variances  of  only  two 
samples.  This  statistic  is  now  generally  accepted  and  designated  either  pair  variance 
or  Allan  variance.  This  is  defined  by 

^)  =  4£Cyr-»-i)2,  (2.311-1) 

k=] 

where  yk  and  yk-\  represent  successive  samples  y  computed  as  in  Equation  2.31-6, 
but  with  the  conditions  that  t2  - 1\  =  t  be  the  same  for  all  samples  and  that  there 
is  no  dead  time  between  samples. 

Allan  (1966)  investigated  the  dependence  of  the  general  sample  variance  on  the 
parameters  of  dead  time,  integration  time,  number  of  measurements  in  the  sample, 
and  measurement-system  bandwidth.  Further  details  are  found  in  Barnes  et  al. 
(1971),  Howe  (1976),  and  CCIR  Report  No.  580. 


gO  EXPLANATORY  SUPPLEMENT 

2.312  Clock  Modeling  The  Allan  variance  (Equation  2.311-1)  is  a  function  of  r. 
Starting  with  sufficiently  small  values  of  r  (a  fraction  of  a  second)  and  letting  t 
increase,  we  observe  that,  for  all  clocks,  o{t)  is  first  decreasing  (frequency  white 
noise),  then  reaches  a  smooth  minimum  (frequency  flicker-noise  floor),  then  in- 
creases (frequency  random  walk).  The  values  of  r  corresponding  to  the  flicker- noise 
floor  indicate  the  ability  of  the  clock  to  ensure  short-term  or  long-term  stability. 
The  knowledge  of  ct(t)  versus  r  is  essential  for  deciding  which  clock  should  be  used 
in  applications.  It  is  also  necessary  to  recognize  abnormal  behavior  (Percival,  1976) 
in  order  to  predict  the  clock  frequency  and  to  maintain  synchronizations.  Methods 
of  optimal  prediction  have  been  discussed  by  Barnes  (1976).  Further  references  are 
Box  and  Jenkins  (1970)  and  Anderson  (1975). 

The  methods  of  characterizing  clock  frequency  can  also  be  applied  to  computed 
timescales,  such  as  TAI,  under  the  assumption  that  such  timescales  are  the  output 
of  fictitious  clocks. 


2.32   Measurement  of  Atomic  Time 

2.321  Quartz-Crystal  Oscillators  Although  they  measure  molecular  rather  than 
atomic  resonances,  quartz-crystal  oscillators  play  a  fundamental  role  in  timekeeping. 
They  are  almost  indispensable  sources  of  stable  signals  in  all  systems,  including 
atomic  clocks.  They  can  be  free-running  or  locked  to  a  reference  signal,  with  time 
constants  ranging  from  milliseconds  to  days.  The  performance  characteristics  may 
range  from  10-4  to  10~13  in  frequency  stability  per  day.  Gerber  and  Sykes  (1966) 
give  a  review  of  quartz-crystal  oscillators. 

2.322  Cesium  Beam  Standards  Cesium-beam  frequency  standards  can  be  divided 
into  two  categories.  One  is  laboratory  cesium-beam  frequency  standards.  These  re- 
alize the  second  with  the  utmost  accuracy  (currently,  1.5  X  10-14)  and  are,  there- 
fore, stable  in  the  very  long  term.  As  of  1988,  operating  instruments  are  located 
in  Canada,  the  Federal  Republic  of  Germany,  Japan,  the  United  States,  and  the 
USSR.  Other  instruments  are  under  construction  in  several  countries.  The  other 
category  includes  commercially  available  frequency  standards.  These  devices  are 
less  accurate  (2  X  10~12),  but  may  equal  the  laboratory  standards  for  stability  up 
to  about  one  year.  The  typical  stability  of  such  high-performance  clocks  is  3  x  10-'4 
for  a  time  interval  of  one  day  (Percival,  1973). 

2.323  Hydrogen  Masers  The  maser  is  the  instrument  of  choice  for  applications 
where  the  utmost  stability  is  needed  for  integration  times  from  ten  seconds  to  ten 
days,  regardless  of  cost.  The  optimum  stability  reaches  about  1  x  10-15  for  integra- 
tion times  of  1000  to  10000  seconds.  The  clock  transition  is  the  transition  P  - 1, 
MF  =  0  to  F  =  0,  MF  =  0,  with  a  transition  frequency  /h  -  142040575 1 . 768  Hz  (Rein- 
hardt  and  Lavanceau,  1974).  The  frequency  of  transition  is  dependent  on  the  cavity 


2  I  TIME 


61 


size  and  temperature  (Peters  and  Washburn,  1984).  Nevertheless,  some  hydrogen 
masers  equipped  with  automatic  tuning  of  the  cavity  and  kept  in  temperature- 
controlled  rooms  have  a  long-term  stability  of  the  same  order  as  the  best  cesium 
standards,  Ramsey  (1968)  gives  principles  and  scientific  background  for  masers  that 
make  it  clear  why  the  hydrogen  maser  has  gained  such  high  interest  among  physi- 
cists. Kleppner  (1965)  gives  a  discussion  of  the  various  physical  effects  governing 
the  maser's  behavior,  along  with  detailed  technical  considerations. 

2.324  Rubidium  Vapor  Cells  The  rubidium  clock  is  an  appropriate  device  when 
a  relatively  low-cost  clock  is  needed  that  has  better  stability  than  a  quartz-crystal 
clock.  The  rubidium  clock  can  reach  a  stability  of  1  x  10~13  per  day  under  the 
best  conditions,  but  it  is  subject  to  temperature-  and  pressure-induced  frequency 
variations.  Ringer  et  al.  (1975)  describe  the  design  and  performance  of  a  clock  for 
the  GPS  satellites.  This  clock  has  achieved  stability  of  2  x  10-13  per  day. 

2.325  Mercury  Ion  Frequency  Standard  The  mercury- ion  frequency  standard  uses 
ions  that  are  confined  in  a  small  region  of  space  by  an  electromagnetic  field  trap. 
Thus  the  particles  can  be  observed  without  having  them  collide  with  the  walls, 
which  would  disturb  the  atomic  resonance.  The  mercury  isotope  Hg-199  has  an 
extremely  narrow  microwave  resonance  line  at  40507  MHz.  Although  this  type  of 
frequency  standard  should  be  a  large  improvement  over  the  cesium  standard,  it  has 
an  unfortunately  low  signal-to-noise  ratio,  resulting  in  limited  short-term  stability. 
However,  the  long-term  stability  is  very  good,  since  integration  can  take  place  over 
a  number  of  days  (Winkler,  1987). 

2.33   Earth  Rotation  Measurement 

At  the  present  time  accurate  determinations  of  UTl  and  polar  motion  are  based  on 
VLBI,  satellite  laser-ranging,  and  lunar  laser-ranging  data.  The  different  techniques 
are  shown  in  Table  2.33.1. 

2.331  Optical  methods  Universal  Time  can  be  determined  from  transit  instru- 
ments, in  particular  the  Danjon  astrolabe  and  the  photographic  zenith  tube  (PZT) 
(Markowitz,  1960).  The  methods  used  are  those  of  classical  spherical  astronomy 
as  presented  in  textbooks  (Mueller,  1969;  Woolard  and  Clemence,  1966;  Danjon, 
1959).  Optical  observations  can  determine  UT  to  about  5  ms  of  time. 

The  classical  optical  methods  are  restricted  by  three  major  problems:  atmo- 
spheric refraction,  star-catalog  errors,  and  spurious  deflections  of  the  vertical.  Cur- 
rent estimates  of  the  capabilities  of  the  various  methods  for  Universal  Time  and 
polar  motion  are  given  in  Table  2.33.1.  As  there  are  generally  correlations  between 
successive  measurement  errors,  increasing  the  averaging  time  by  a  factor  /  does  not 
result  in  a  decrease  of  the  uncertainties  by  f~m. 


62 


EXPLANATORY  SUPPLEMENT 


Table  2.33.1 

Techniques  for  Measuring  Earth's  Rotation 


Technique 

Polar 

Universal 

Averaging 

Measurement 

Motion  {") 

Time  (ms) 

Time 

Conditions 

Astrolabe 

0.06 

4 

2  hours 

one  instrument 

Photographic  Zenith 

0.04 

4 

2  hours 

one  instrument 

Tube 

Optical  Method 

0.01 

0.8 

5  days 

network  of  80  instruments 

Doppler 

0.01 

2  days 

1  satellite,  20  stations 

L.LI 

n  ni 

1 
1 

3  days 

VLBI 

0.001 

0.05 

24  hours 

network  of  5  or  6  stations 

0.1 

1  hour 

2  stations 

Satellite  Laser-Ranging 

0.001 

0.1 

3  days 

network,  -  20  stations 

(LAGEOS) 

Lunar  Laser-Ranging 

0.1 

1  day 

1  instrument* 

*  Under  good  meteorological  conditions 


2.332  The  Doppler  Method  The  Doppler  satellite  system  uses  as  a  reference  a 
network  of  stations  distributed  over  the  globe.  The  system  does  not  have  a  fixed 
reference  in  space  and  is  dependent  upon  the  dynamics  of  the  satellites  and  the 
knowledge  of  the  positions  of  the  Earth-based  stations.  A  report  on  this  method 
is  given  by  Anderle  (1976).  The  Doppler  method  provides  length  of  day  and  polar 
motion  values,  but  cannot  determine  Universal  Time. 

2.333  Lunar  Laser-Ranging  Laser-pulse  ranging  between  Earth-based  telescopes 
and  retroreflectors  installed  on  the  surface  of  the  Moon  is  currently  done  to  a  preci- 
sion of  approximately  2  cm.  A  capability  of  determining  Universal  Time  to  a  fraction 
of  a  millisecond  was  demonstrated  by  Silverberg  (1974)  and  is  effectively  shown  by 
recent  results  (Newhall  et  ai,  1988;  Veillet  and  Pham  Van,  1988). 

Because  of  the  precision  of  the  measurements,  these  observations  are  very  sen- 
sitive to  the  dynamics  of  the  Earth-Moon  system.  They  provide  very  accurate 
corrections  to  the  theory  of  the  Moon's  motion  and  librations  and  the  theory  of 
general  relativity.  Other  significant  parameters  are  those  that  affect  the  positions 
of  the  Moon-based  retroreflectors  and  the  Earth-based  telescope — including  Earth 
tides,  continental  drift,  plate  motion,  and  polar  motion.  The  observations  are  also 
sensitive  to  the  constant  of  precession,  the  theory  of  nutation,  and  the  Earth's  orbit. 
All  of  these  parameters  are  correlated  in  complex  ways. 

2.334  Radio  Interferometry     The  rotational  position  of  the  Earth  is  measured  with 
respect  to  a  plane  parallel  wave  from  a  cosmic  radio  source  that  is  so  far  away  that 
it  can  be  safely  assumed  to  be  without  proper  motion.  Very  Long  Baseline  Inter- 


2  /  TIME 


63 


feromefry  (VLB!)  and  Connected  Element  Interferometry  (CEI)  can  be  used  to 
determine  Universal  Time  and  polar  motion  with  excellent  resolution.  VLBI  of- 
fers higher  precision.  In  addition,  it  provides  synchronization  between  clocks  at  the 
participating  observatories  to  a  precision  of  a  fraction  of  a  nanosecond.  But  since 
the  observations  from  participating  observatories  must  be  correlated,  VLBI  has  the 
disadvantage  of  a  delay  between  the  time  of  observation  and  the  availability  of  the 
results.  CEI  techniques  have  the  advantage  of  being  less  expensive  and  providing 
immediate  results.  VLBI  techniques  are  described  by  Counselman  (1976)  and  Meeks 
(1976).  Short  baseline  techniques  are  described  by  Johnston  (1974). 

2.34   Dynamical  Time  Determinations 

The  IAU  (1976)  definition  of  dynamical  time  (see  Section  2.22)  relates  the  dynam- 
ical time  of  solar-system  ephemerides  to  the  timescale  of  terrestrial  atomic  physics. 
However,  distinctions  must  be  made  between  an  ideal  dynamical  time,  which  is 
the  independent  variable  in  the  equations  of  motion  for  the  solar  system,  and  both 
TDT  and  TDB,  which  are  currently  defined  as  ideal  forms  of  atomic  time. 

In  principle,  the  time  in  the  equations  of  motion  of  the  Sun,  Moon,  and  planets 
could  diverge  from  the  time  determined  from  observations  of  phenomena  of  terres- 
trial physics.  At  the  present  time,  observational  determinations  are  not  sufficiently 
accurate  to  indicate  such  a  systematic  difference.  If  a  true  difference  were  detected, 
the  scientific  community  would  have  to  decide  how  to  accommodate  that  difference. 
An  ideal  dynamical  time  can  be  determined  only  by  analysis  of  observations  over 
an  extended  period  of  time. 

Occultation  observations,  specifically  observations  of  the  time  when  the  Moon 
passes  in  front  of  a  star,  provide  the  most  accurate  current  method  for  investigating 
dynamical  time.  The  observations  require  a  recording  of  the  time  when  the  occul- 
tation took  place  and  the  location  of  the  observer.  The  predicted  dynamical  time 
of  the  occultation  can  be  compared  with  the  recorded  atomic  time  of  the  observed 
phenomenon  to  provide  information  concerning  the  difference  between  dynamical 
time  and  International  Atomic  Time  (TAI). 

A  difference  between  dynamical  time  and  TAI  could  also  be  revealed  if  different 
methods  of  determining  Universal  Time  give  discordant  results.  In  particular,  a 
disagreement  between  Lunar  Laser-Ranging  and  Very  Long  Baseline  Interferometry 
could  indicate  nonmodeled  variations  of  the  Moon's  right  ascension.  This  would 
provide  a  determination  of  dynamical  time. 

Future  analysis  of  high-precision  planetary  observations  could  reveal  a  differ- 
ence in  the  timescales  if  differences  between  predicted  and  observed  positions  are 
systematically  proportional  to  the  mean  motions  of  the  planets.  At  the  present 
time,  the  planetary  residuals  do  not  indicate  such  a  systematic  deviation,  and  the 
possibility  is  only  a  conjecture. 


64 

2.4    METHODS  OF  TIME  TRANSFER 


EXPLANATORY  SUPPLEMENT 


The  determination  and  maintenance  of  a  timescale  at  its  source  is  a  distinct  prob- 
lem from  the  dissemination  of  that  timescale  to  many  sites  around  the  world.  The 
appropriate  method  of  disseminating  the  timescale  is  largely  dependent  upon  the 
accuracy  required.  Also,  the  appropriate  method  can  be  expected  to  change  with 
time  as  new  and  improved  technologies  become  available. 

Although  this  section  will  discuss  the  various  techniques  currently  in  use  and 
the  accuracies  achievable,  it  can  be  expected  that  the  contents  of  this  section  will  be 
one  of  the  first  to  be  out  of  date.  The  most  up-to-date  information  on  this  subject 
can  be  found  in  the  documents  of  the  Consultative  Committee  on  International 
Radio  (CCIR)  Study  Group  7:  Standard  Frequencies  and  Time  Signals.  A  review 
is  given  by  Klepczynski  (1984).  A  CCIR  Handbook  on  satellite  time  and  frequency 
dissemination  is  in  preparation. 

There  are  two  main  techniques  for  transferring  time:  transportation  of  an  op- 
erating clock  and  sending  of  time  signals.  The  latter  technique  subdivides  into 
one-way  and  two-way  methods. 

In  the  one-way  methods,  knowledge  of  the  propagation  delay  is  required  and  is 
often  a  limitation  to  the  accuracy.  For  instance,  the  traditional  high-frequency  time 
signals  are  subject  to  delay  variations  and  an  accuracy  of  only  1  ms  can  be  achieved. 
But  in  the  use  of  the  Global  Positioning  System  (GPS)  satellites,  the  propagation 
can  be  well-modeled,  and  determination  of  time  from  a  specific  satellite  has  an 
uncertainty  in  the  10-20  ns  range. 

One  mode  of  operation  of  the  one-way  technique  is  to  receive  the  same  sig- 
nal at  two  or  more  sites.  After  the  exchange  of  data,  the  difference  of  readings  of 
the  clocks  is  obtained  at  the  emitter.  Only  the  differential  delay  of  propagation 
is  needed.  This  method  allows  for  accurate  time  comparisons  using  the  signals  of 
commercial  television,  LORAN-C,  GPS  and  geosynchronous  satellites,  and  natural 
astronomical  sources  such  as  VLBI. 

Two-way  techniques  involve  the  nearly  simultaneous  exchange  of  time  signals 
back  and  forth,  along  the  same  path.  The  uncertainties  are  reduced  because  the 
propagation  delay  is  eliminated  in  the  data  processing.  Usually  the  method  is  ap- 
plied using  a  satellite  to  relay  the  signal.  This  requires  complex  equipment.  Laser 
pulses  can  be  used  either  for  a  terrestrial  link  or  for  a  link  involving  reflection  on 
an  artificial  satellite.  In  the  USSR,  the  two-way  technique  is  routinely  used  with  re- 
flection on  meteor  trails,  with  accuracies  reaching  20-25  ns.  When  the  uncertainties 
of  the  time  transfers  are  smaller  than  1  /is,  relativistic  effects  must  be  considered, 
as  explained  in  Section  2.47. 


2  /  TIME 

2.41    Radio  Time  Signals 


65 


Radio  time  signals  continue  to  be  a  simple  means  of  distributing  time.  The  trans- 
mitted time  is  UTC,  with  a  code  or  voice  transmission  of  DUT1  so  that  UTl  can 
be  obtained  using  the  relation  UTl  -  UTC  +  DUT1.  A  number  of  countries  have 
standard-frequency  transmissions  with  a  wide  coverage  and  an  extended  period 
of  continuous  transmission.  The  common  frequencies  for  transmission  are  2.5,  5, 
10,  15,  20,  and  25  Mc/s.  However,  a  number  of  countries  also  have  transmissions 
at  special  frequencies  and  specific  times.  Report  267-5  of  CCIR.  Study  Group  7 
and  the  Annual  Report  of  the  time  section  of  BIPM  give  the  characteristics  of 
standard-frequency  and  time-signal  emissions  in  allocated  bands,  and  characteris- 
tics of  stations  emitting  with  regular  schedules  with  stabilized  frequencies  outside 
of  allocated  bands. 

The  accuracy  that  can  be  obtained  is  severely  restricted  by  unknown  variations 
in  the  travel  time  of  the  radio  signal,  particularly  on  the  higher  frequencies.  The 
received  signal  may  contain,  in  varying  quantity,  signals  that  have  traversed  differ- 
ent transmission  paths.  Reception  conditions  may  differ  widely  between  different 
reception  sites  and,  at  any  one  site,  there  may  be  a  considerable  diurnal  variation. 
The  best  result  is  generally  achieved  by  measuring  transmissions  at  different  times 
throughout  the  day  and  by  taking  suitably  weighted  means.  Anomalies  are  partic- 
ularly troublesome  when  sunrise  or  sunset  occurs  on  the  transmission  path;  these 
times  should  be  avoided  if  possible.  The  most  serious  discordances  may  occur  when 
the  reception  site  is  within  the  skip  area  of  the  transmitter,  since  the  predominating 
signal  may  be  received  by  backscatter  from  a  distant  point,  either  on  the  ground 
or  in  the  ionosphere. 


2.42   Portable  Clocks 

The  use  of  portable  atomic  clocks  for  the  comparison  of  timescales  has  been  the 
most  reliable  and  accurate  method.  It  has  also  been  one  of  the  most  expensive 
techniques  on  a  cost-per-comparison  basis.  Portable  clocks  have  been  necessary  for 
calibrating  path  delays  for  synchronization  by  other  means.  Portable  atomic  clocks 
were  first  used  by  Reder  and  Winkler  (1960)  in  experiments  conducted  in  1959  and 
1960.  These  early  atomicrons  were  7-feet  high  and  weighed  several  hundred  pounds. 
They  were  portable  in  the  sense  that  they  could  be  transported  while  running,  but 
they  required  extensive  external  power.  In  the  early  sixties,  the  size  of  cesium-beam 
clocks  was  reduced  enough  that  two  men  could,  with  difficulty,  transport  a  clock. 
This  was  demonstrated  by  Bagley  and  Cutler  (1964). 


66  EXPLANATORY  SUPPLEMENT 

In  1965  the  U.S.  Naval  Observatory  established  a  portable  clock  service,  which 
has  provided  thousands  of  clock  synchronizations.  The  portable  clock  consists  of  a 
commercial  cesium-beam  oscillator,  a  counter  or  clock,  and  a  power  supply  with 
rechargeable  batteries,  which  are  capable  of  approximately  eight  hours  of  continu- 
ous operation  without  connection  to  alternating  current.  The  clock  system  weighs 
approximately  68  kg  and  measures  approximately  0.4  m  by  0.4  m  by  0.53  m.  The 
usual  precautions  of  minimizing  shock,  vibration,  heat,  cold,  and  magnetic  fields 
are  mandatory  to  yield  high  accuracy  on  portable  clock  trips. 

For  a  clock  trip,  the  portable  atomic  clocks  are  adjusted  and  kept  as  close  to 
the  frequency  of  the  master  clock  as  possible.  The  time  is  set  so  that  the  difference 
between  the  portable  clock  and  the  master  clock  passes  through  zero  at  the  mid- 
point of  the  trip.  On  the  day  of  departure,  clock  measurements  are  made  against 
the  reference  clock  systems  of  the  master  clock  with  a  resolution  better  than  a 
nanosecond,  and  with  a  small,  portable,  ten-nanosecond  counter  that  is  taken  on 
the  trip.  During  the  trip,  clock  data  are  recorded  for  each  individual  clock.  When 
the  clock  is  returned,  it  is  again  compared  with  the  master  clock.  Once  post-trip 
data  are  available,  both  the  frequency  offset  of  the  portable  clock  and  the  reduction 
and  analysis  of  the  trip  data  can  be  completed.  For  accurate  results,  the  changes  in 
the  gravitational  fields  on  the  clock  and  the  clock  velocity  relative  to  ground-based 
or  stationary  clocks  must  be  considered  (see  Section  2.47). 

2.43  LORAN-C 

The  LORAN-C  navigation  system  has  been  routinely  used  as  a  time-transfer  stan- 
dard for  time  and  frequency  coordination  since  1969.  The  LORAN-C  system  con- 
sists of  chains,  each  of  which  has  a  master  transmitter  and  two  to  four  secondary,  or 
slave,  transmitters.  Each  of  the  master  transmitters  is  separated  by  several  hundred 
kilometers.  The  master  transmitter  emits  a  series  of  coded  100-kHz  bursts  that  axe 
repeated  after  specified  and  controlled  delays  by  the  secondary  stations.  Bursts  of 
100-kHz  transmissions  enable  the  receiver  to  separate  the  stable  ground- wave  signal 
from  the  sky-wave  signal  that  arrives  40  ms  or  more  later.  A  navigation  or  timing 
receiver  will  track  the  third  cycle  of  the  received  bursts.  Each  LORAN-C  station 
has  a  cesium  standard  for  deriving  time  signals.  The  complete  chain  is  overseen  by 
one  or  more  monitor  stations  that  measure  and  control  the  emission  delays.  Navi- 
gation accuracy  within  the  ground-wave  coverage  of  the  chain  is  0.10-0.25  nautical 
miles.  Ground-wave  coverage  of  the  LORAN  C  transmitter  is  highly  variable,  and 
is  a  function  of  the  radiated  power  (275-1800  kilowatts)  and  the  conductivity  of 
the  path.  Over  land,  ground- wave  coverage  is  typically  500-1000  km;  over  water 
this  coverage  can  be  over  2000  km.  Since  each  LORAN-C  chain  is  independent, 
time  comparisons  with  LORAN-C  are  restricted  to  laboratories  that  have  com- 
mon ground-wave  views  of  a  single  chain.  With  a  single  chain,  the  monitor  stations 
maintain  self-consistent  timing  to  better  than  a  microsecond.  The  uncertainty  of 


2  /  TIME 


67 


a  LORAN-C  time  comparison  is  on  the  order  of  50-100  ns  for  one  day,  with  the 
uncertainty  increasing  to  300  1000  ns  for  one  hundred  days.  This  increase  is  due 
to  annual  weather-related  effects  over  the  LORAN-C  ground-wave  path.  Changes 
in  ground  conductivity  as  well  as  temperature  will  change  the  path  delay  of  the 
LORAN-C  ground-wave  signal.  Uncertainty  of  the  path  delay  is  the  physical  lim- 
itation of  LORAN-C  timing  networks,  and  is  independent  of  the  quality  of  the 
LORAN-C  system  or  the  LORAN-C  receiver. 

2.44   Television  Comparison  Techniques 

Another  technique  for  time  or  frequency  comparisons  is  television  (TV)  transmis- 
sions or  high-power,  wide-bandwidth  communication  links  that  broadcast  in  VHF 
and  UHF  frequency  bands.  (These  bands  have  small  propagation  delay  variations.) 
Television  receivers  are  inexpensive  and  readily  available.  There  are  two  basic  types 
of  TV  transfer  links.  The  first  is  the  differential  transfer  link,  in  which  both  clocks 
are  in  common  view  of  a  single  TV  transmitter.  The  second  includes  a  microwave- 
network  link  as  part  of  the  differential  path.  The  common-view  transfer  link  is 
much  more  stable,  since  only  the  different  propagation  paths  through  the  atmo- 
sphere affect  the  measurement.  Long-term  time-transfer  stability  of  10-150  ns  can 
be  expected.  Such  transfer  links  have  been  used  for  comparison  for  everything  from 
remote  clocks  to  standard  timing  laboratories. 

A  clock-comparison  link  that  includes  a  network  microwave  system  will  have 
greater  time-transfer  uncertainty.  The  differential  path  includes  delays  from  user 
to  transmitter,  delays  from  studio  to  transmitter  link,  delays  from  an  intermediate 
studio,  delays  through  multiple  microwave  repeaters  to  the  network  origination 
point,  and  delays  from  the  transmitter  to  the  other  user.  Except  for  the  delay 
between  the  user  and  the  transmitter,  the  delays  are  subject  to  step  changes  from 
a  hundred  nanoseconds  to  several-hundred  microseconds. 

To  ensure  that  the  TV  programs  remain  on  the  air,  the  links  are  redundant 
for  reliability.  Therefore,  if  there  is  a  bad  studio-to-transmitter  link,  a  backup  link 
will  be  switched  in  its  place.  These  changes  to  the  backup  can  cause  differences 
in  the  delay  of  as  much  as  500  nanoseconds.  Due  to  this  redundant  characteristic 
of  the  TV  networks,  the  networks  are  largely  unsuitable  for  high-accuracy  time 
coordination. 

Another  factor  that  reduces  the  use  of  TV-network  transfer  links  is  the  use 
of  digital  frame  synchronizers  by  the  network  stations.  The  purpose  of  the  frame 
synchronizer  is  to  synchronize  the  network  picture  with  all  locally  generated  signals, 
thus  preventing  picture  rolls  when  switching  between  a  network  program  and  a  local 
program.  A  digital  frame  synchronizer  continuously  digitizes  and  stores  an  incoming 
TV  signal.  The  stored  digital  information  is  continuously  read  out  and  converted 
back  to  an  analog  video  signal  under  control  of  the  station's  master  synch  generator. 
The  synchronizing  pulses  for  the  network  picture  have  therefore  been  replaced  by 


68  EXPLANATORY  SUPPLEMENT 

local  station  synchronizing  pulses.  Thus  network  synchronizing  pulses  that  are  used 
for  the  time  transfer  have  been  lost. 

2.45   Use  of  Satellites 

Both  the  Transit  satellite  system  and  the  Global  Positioning  System  (GPS)  can 
be  used  for  one-way  time  transfer.  Each  Transit  satellite  continuously  transmits  its 
current  ephemeris  encoded  by  a  phase  modulation  on  two  stable  carrier  frequencies 
of  approximately  150  MHz  and  400  MHz.  The  navigational  information  is  broadcast 
in  two-minute  intervals,  which  begin  and  end  at  the  instant  of  each  even  minute. 
An  encoded  time  marker  is  broadcast,  with  time  uniquely  marked  at  the  instant  of 
the  even  minute. 

The  broadcast  frequencies  are  based  on  the  highly  precise  master  oscillator. 
The  Transit  satellite  system  is  expected  to  be  replaced  by  the  NAVSTAR  GPS 
navigation  system.  This  system  calls  for  a  constellation  of  18  satellites  that  are 
distributed  in  orbital  planes  inclined  at  63°  with  respect  to  the  Earth's  equatorial 
plane.  Although  the  GPS  system  is  designed  for  navigation  capabilities,  it  also 
coordinates  most  of  the  major  timescales  in  the  world.  The  GPS  system  has  an 
accuracy  of  about  10  ns  for  ten-day  averaging.  The  most  accurate  time  comparison 
by  GPS  is  based  on  a  common  satellite  procedure.  GPS  satellites  on  a  flyby  mode 
make  two  separate  comparisons  with  respect  to  the  GPS  satellite  clock.  A  linear  rate 
for  the  satellite  clock  is  assumed.  This  method  does  not  provide  the  same  accuracy 
as  the  common-view  procedure,  since  the  clock  error  and  ionospheric  errors  will 
be  present  and  more  significant.  The  error  budget  for  a  common-view  GPS  time 
transfer  is  given  in  Table  2.45.1. 


Table  2.45.1 

Error  Budgets  for  Common  View  GPS  Time  Transfer 


Type  of  Delay 

Best  Case 

Worst  Case 

RMS 

RMS 

Satellite  Ephemeris 

3  ns 

10  ns 

Ionospheric 

2  ns 

100  ns 

Tropospheric 

1  ns 

20  ns 

User-Position 

1  ns 

1  ns 

Multipath 

1  ns 

2  ns 

Receiver 

1  ns 

1  ns 

Signal-To-Noise 

7  ns 

1  ns 

Total  RMS 

4.2  ns 

103  ns 

(for  single  13-minute  track) 

Note:  Some  of  the  errors  depend  on  the  distance  (for  example  the 
satellite  ephemeris).  The  best  case  applies  to  distance  of 
2000-3000  km;  the  worst  case  is  for  distance  of  6000-8000  km. 


2  /  TIME 


69 


With  one-way  time  transfer,  the  accuracy  of  the  method  is  basically  limited 
to  the  accuracy  of  the  ephemeris  or  the  knowledge  of  the  satellite's  position.  In  a 
two-way  time  transfer,  a  time-interval  counter  is  located  at  each  Earth  station.  The 
counter  is  started  by  a  pulse  from  a  local  clock  and  stopped  by  a  pulse  received  via 
the  satellite  from  the  remote  clock.  Thus  the  time  interval  between  pulses  involves 
the  transmitter  delay,  the  propagation  delay  between  the  Earth  station  and  the 
satellite,  the  delay  in  the  satellite  for  the  signal  received,  the  propagation  delay 
between  the  satellite  and  the  other  Earth  station,  and  the  same  list  of  delays  on 
the  return  direction.  In  addition,  the  effect  of  the  Earth's  rotation  must  be  taken 
into  account,  because  during  the  period  of  the  time  transfer,  both  Earth  stations 
have  moved  and  the  satellite  has  moved.  Thus  each  leg  of  the  comparison  must 
be  considered  individually,  and  they  cannot  be  assumed  to  be  equivalent  to  the 
corresponding  leg  at  a  different  time.  The  differential  delay  effects  caused  by  the 
Earth's  atmosphere  and  the  different  frequencies  of  the  different  legs  should  not 
exceed  a  few  nanoseconds,  whether  due  to  geometric  effects  or  to  velocity  effects 
caused  by  the  ionosphere  and  troposphere.  At  frequencies  of  20-30  GHz,  the  effects 
of  humidity  may  cause  significant  inequalities  for  time  transfers  at  the  nanosecond 
level  (Oaks,  1985). 


2.46    Intercontinental  Clock  Synchronization  by  VLBI 


With  Very  Long  Baseline  Interferometry  (VLBI),  radio  signals  from  celestial  objects 
are  recorded  at  individual  remote  radio  telescopes.  The  observational  data  are  then 
brought  together  for  correlation  so  that  precise  values  for  the  differences  between 
the  clocks  at  the  individual  antennas  can  be  determined.  The  fundamentals  of 
VLBI  have  been  described  by  Klemperer  (1972),  who  also  presents  an  extensive  list 
of  references.  Several  VLBI  experimental  programs,  and  the  fundamentals  of  the 
process,  were  described  by  Clark  (1972).  Frequency  comparisons  with  an  accuracy  of 
10-13  to  10-14  and  clock  synchronization  of  the  order  of  1  ns  are  possible.  To  achieve 
this  accuracy,  110-megahertz  bandwidths  are  required.  These  can  be  achieved  by  the 
bandwidth  synthesis  techniques  described  by  Hinteregger  et  ai  (1972)  and  Rogers 
(1970).  The  VLBI  process  requires  distinct  measurements  based  on  prearranged 
experiments  involving  different  locations.  The  results  of  the  time  comparisons  are 
not  available  until  the  two  data  sets  are  brought  together  and  correlated.  In  theory, 
if  sufficient  data  are  available  and  a  sufficiently  large  bandwidth  can  be  obtained, 
the  VLBI  synchronization  method  is  mainly  limited  in  accuracy  by  the  difficulty 
of  determining  the  overall  system  delay  and  the  atmospheric  or  ionospheric  delay 
(Johnston  et  ai,  1983). 


70 

2.47   Relativistic  Effects  in  Time  Transfer 


EXPLANATORY  SUPPLEMENT 


When  transferring  time  between  two  points,  the  process  can  be  viewed  from  one 
of  two  reference  frames — a  geocentric,  Earth-fixed,  rotating  frame  or  a  geocentric, 
nonrotating,  local  inertial  frame.  Discussions  of  time  transfer  viewed  from  these 
two  frames  are  given  in  the  following  sections.  The  equations  used  in  the  discus- 
sions represent  clock  rates  with  an  accuracy  better  than  1  in  1014.  In  addition,  the 
equations  are  consistent  with  the  proposal  of  the  Consultative  Committee  for  the 
Definition  of  the  Second  (see  Section  2.211),  but  they  extend  the  procedures  to 
heights  that  include  geostationary  satellite  orbits. 

2.471    Clock  Transport  from  a  Rotating  Reference  Frame     When  time  is  transferred 
from  point  P  to  point  Q  by  means  of  a  portable  clock,  the  coordinate  time  accu- 
mulated during  transport  is 


At  =  J  d 


AU(r)  v2 


+  -^-AE,  (2.471-1) 


where  c  is  the  speed  of  light;  w  is  the  angular  velocity  of  the  Earth's  rotation;  v  is 
the  velocity  of  the  clock  with  respect  to  the  ground;  r  is  a  vector  from  the  center  of 
the  Earth  to  the  clock,  which  is  moving  from  P  to  Q\  Ag  is  the  equatorial  projection 
of  the  area  swept  out  during  the  time  transfer  by  the  vector  r  as  its  terminus 
moves  from  P  to  Q;  AU(r)  is  the  potential  difference  between  the  location  of  the 
clock  at  r  and  the  geoid  as  viewed  from  an  Earth-fixed  coordinate  system  (with 
the  convention  that  At/(r)  is  positive  when  the  clock  is  above  the  geoid);  and  ds  is 
the  increment  of  proper  time  accumulated  on  the  portable  clock.  The  increment  of 
proper  time  is  the  time  accumulated  on  the  portable  standard  clock  as  measured 
in  the  rest  frame  of  the  clock;  i.e.,  the  reference  frame  traveling  with  the  clock.  Ae 
is  measured  in  an  Earth-fixed  coordinate  system.  As  the  area  Ae  is  swept  out,  it  is 
taken  as  positive  when  the  projection  of  the  clock's  path  on  the  equatorial  plane 
is  eastward.  When  the  height  h  of  the  clock  is  less  than  24  km  above  the  geoid, 
AU{r)  may  be  approximated  by  gh,  where  g  is  the  total  acceleration  due  to  gravity 
(including  the  rotational  acceleration  of  the  Earth)  evaluated  at  the  geoid.  When  h 
is  greater  than  24  km,  the  potential  difference  AU{r)  must  be  calculated  to  greater 
accuracy  as  follows: 

AV(r)  =  ~GMe(1--1-)-  ioV  sin2  9-a\)+  ^  [l  +  (  *Y  (3cos2  0-1)1. 

(2.471-2) 

In  this  equation,  at  is  the  equatorial  radius  of  the  Earth;  r  is  the  magnitude  of 
the  vector  r;  8  is  the  colatitude;  GMe  is  the  product  of  the  Earth's  mass  and  the 
gravitational  constant;  and  J2  is  the  quadrupole  moment  coefficient  of  the  Earth 
{J2  =+1.083  x  10~3). 


2  /  TIME 


71 


2.472  Nonrotating,  Local  Inertial  Reference  Frame  When  time  is  transferred  from 
point  P  to  point  Q  by  means  of  a  clock,  the  coordinate  time  elapsed  during  the  mo- 
tion of  the  clock  is 


At 


is 


1  - 


U(r)  -  t/g  v2 

72     +  2? 


(2.472-1) 


Here  E/(r)  is  the  potential  at  the  location  of  the  clock  and  v  is  the  velocity  of 
the  clock,  both  as  viewed — in  contrast  to  Equation  2.471-1 — from  a  geocentric 
nonrotating  reference  frame.  Ug  is  the  potential  at  the  geoid,  including  the  effect 
on  the  potential  of  the  Earth's  rotational  motion.  Note  that  AU{v)  ^  U(r)  -  Ugl 
since  U(r)  does  not  include  the  effect  of  the  Earth's  rotation.  This  equation  also 
applies  to  clocks  in  geostationary  orbits,  but  should  not  be  used  beyond  a  distance 
of  about  50000  km  from  the  center  of  the  Earth. 


2.473  Electromagnetic  Signals  Transfer  from  a  Rotating  Reference  Frame  From 
the  viewpoint  of  a  geocentric,  Earth-fixed,  rotating  frame,  the  coordinate  time 
elapsed  between  emission  and  reception  of  an  electromagnetic  signal  is 

c  Jp     L  c 

where  da  is  the  increment  of  standard  length,  or  proper  length,  along  the  transmis- 
sion path;  and  AU(t)  is  the  potential  at  the  point  r  on  the  transmission  path  less 
the  potential  at  the  geoid  (see  Equation  2.472-1),  as  viewed  from  an  Earth- fixed 
coordinate  system.  Ae  is  the  area  circumscribed  by  the  equatorial  projection  of  the 
triangle  whose  vertices  are  at  the  center  of  the  Earth;  at  the  point  of  transmission 
of  the  signal,  P;  and  at  the  point  of  reception  of  the  signal,  Q. 

The  area  Ag  is  positive  when  the  signal  path  has  an  eastward  component  .  The 
second  term  amounts  to  about  a  nanosecond  for  a  round-trip  trajectory  from  the 
Earth  to  a  geostationary  satellite.  In  the  third  term,  2u>/c2  =  1. 6227  x  10-6  ns  km-2; 
this  term  can  contribute  hundreds  of  nanoseconds  for  practical  values  of  AE.  The 
increment  of  proper  length  da  can  be  taken  as  the  length  measured  using  standard 
rigid  rods  at  rest  in  the  rotating  system.  This  is  equivalent  to  measurement  of  length 
by  taking  c/2  times  the  time  (normalized  to  vacuum)  of  a  two-way  electromagnetic 
signal  sent  from  P  to  Q  and  back  along  the  transmission  path. 


2lo 


rAE, 


(2.473-1) 


2.474    Electromagnetic  Signal  Transfer  from  a  Nonrotating,  Local  Inertial  Frame 

From  the  viewpoint  of  a  geocentric  nonrotating,  local  inertial  frame,  the  coordinate 
time  elapsed  between  emission  and  reception  of  an  electromagnetic  signal  is 


Ar 


.if 

c  Jp 


da 


1  - 


U(r)-UE~ 


(2.474-1) 


72  EXPLANATORY  SUPPLEMENT 

where  U(t)  and  Ug  are  defined  as  in  Equation  2.472-1,  and  da  is  the  increment  of 
standard  length,  or  proper  length,  along  the  transmission  path.  The  quantities  da 
appearing  in  Equations  2.473-1  and  2.474-1  differ  slightly  because  the  reference 
frames  in  which  they  are  measured  are  rotating  with  respect  to  each  other. 


Example  1  Due  to  relativistic  effects,  a  clock  at  an  elevated  location  will  appear  to  be 
higher  in  frequency  and  will  differ  in  normalized  rate  from  TAI  by 

AUt/c1,  (2.474-2) 

where  AUt  is  the  difference  in  the  total  potential  (gravitational  and  centrifugal  potentials), 
and  where  c  is  the  velocity  of  light.  Near  sea  level  this  is  given  by 

g(<j>)h  I  c1,  (2.474-3) 

where  g(4>)  =  (9.  780  +  0,  052  sin2  0)  m/s2  is  the  total  acceleration  at  sea  level  (gravita- 
tional and  centrifugal),  <j>  is  the  geographical  latitude,  and  h  is  distance  above  sea  level. 
Equation  2.474-3  must  be  used  in  comparing  primary  sources  of  the  Sf  second  with  TAI 
and  with  each  other.  For  example,  at  latitude  40°,  the  rate  of  a  clock  will  change  by 
+  1.091  x  10-13  for  each  kilometer  above  sea  level. 


Example  2  If  a  clock  is  moving  relative  to  the  Earth's  surface  with  the  speed  v,  which 
may  have  the  component  v-  g  in  the  direction  to  the  east,  the  normalized  difference  of  the 
frequency  of  the  moving  clock  from  that  of  a  clock  at  rest  at  sea  level  is 

1  f  +  gi^h  _  1  wr(cQS  ^)VE;  (2.474^1) 

2  cl       cl  cl 

where  u>  is  the  angular  rotational  velocity  of  the  Earth  [uj  =  7.992  X  10-5  rad/s),  r  is  the 
distance  of  the  clock  from  the  center  of  the  Earth  (r  =  6378.  140  km),  c  is  the  velocity  of 
light  (c  =  2.99792458  x  105  km/s),  and  4>  is  the  geographical  latitude. 


Example  3  A  clock  is  moving  270  m/s  eastward  at  40°  latitude  at  an  attitude  of  9  km. 
The  normalized  difference  of  frequency  of  the  moving  clock  relative  to  that  of  a  clock  at 
rest  at  sea  level  is 

-4.06x  10~13  +9.82x  10~13  -  1.071  x  10-12  =4.95  x  10"13.  (2.474-5) 

The  choice  of  a  coordinate  frame  is  purely  a  discretionary  one,  but  to  define  coordinate 
time,  a  specific  choice  must  be  made.  It  is  recommended  that  for  terrestrial  use,  a  topocen- 
tric  frame  be  chosen.  In  this  frame,  when  a  clock  B  is  synchronized  with  a  clock  A  by  a 
radio  signal  traveling  from  A  to  B  {both  clocks  being  stationary  on  the  Earth),  these  two 
clocks  differ  in  coordinate  time  by 


B-A  =  %  /  r2  cos2  (MA, 
c-  Jp 


(2.474-6) 


2  /  TIME 


73 


where  <f>  is  the  latitude,  A  is  the  longitude  (the  positive  sense  being  eastward),  and  P  is  the 
path  over  which  the  radio  signal  travels  from  A  to  B.  If  the  two  clocks  are  synchronized 
by  a  portable  clock,  they  will  differ  in  coordinate  time  by: 

r1  cos2  4>d\,  (2.474-7) 

where  v  is  the  portable  clock's  ground  speed,  and  P  is  the  portable  clock's  path  from  A 
to  B. 

This  difference  can  be  as  much  as  several  tenths  of  a  microsecond.  It  is  recommended 
that  Equations  2.474-6  and  2.474-7  be  used  as  correction  equations  for  long-distance 
clock  synchronization.  Since  these  equations  are  path  dependent,  they  must  be  taken  into 
account  in  any  self-consistent  coordinate  time  system. 

If  a  clock  is  transported  from  a  point  A  to  a  point  B  and  is  brought  back  to  A  on  a  different 
path  at  infinitely  low  speed  at  h  =  0,  its  time  will  differ  from  that  of  a  clock  remaining  in 
A  by 

Ai  =  -2u}AE  I  c2,  (2.474-8) 

where  Ae  is  the  area  denned  by  the  projection  of  the  round  trip  path  onto  the  plane  of  the 
Earth's  equator.  Ae  is  considered  positive  if  the  path  is  traversed  in  the  clockwise  sense 
viewed  from  the  South  Pole. 


Example  4  Since 

lu/c1  =  1.6227  x  10~6nskm~2,  (2.474-9) 

the  time  of  a  clock  carried  eastward  around  the  Earth  at  infinitely  low  speed  at  h  =  0  at 
the  equator  will  differ  from  a  clock  remaining  at  rest  by  —207.4  ns. 


2.5    HISTORICAL  DEVELOPMENT  OF  TIMEKEEPING 
2.51  Introduction 

The  earliest  attempts  to  measure  time  were  probably  based  on  observations  of  ce- 
lestial and  meteorological  phenomena:  the  seasonal  motion  of  the  Sun  along  the 
horizon,  the  progression  of  Moon  phases,  the  shifting  of  winds,  and  so  on.  Time- 
keeping, which  we  take  to  mean  the  measurement  of  subdivisions  of  the  day,  has 
long  involved  observations  of  both  celestial  and  terrestrial  phenomena.  On  the  ce- 
lestial side  is  the  measurement  of  shadows  cast  by  a  vertical  gnomon,  which  led 
to  the  development  of  sundials.  On  the  terrestrial  side  is  the  development  of  water 
clocks  {clepsydrae).  The  origins  of  both  approaches  predate  historical  records.  His- 
torical references  to  water  clocks  are  found  in  Babylonian  and  Egyptian  records  of 
the  sixteenth  century  B.C.  (Turner,  1984). 


74  EXPLANATORY  SUPPLEMENT 

The  system  of  hours  developed  first  in  Egypt,  where  day  and  night  were  each 
divided  into  12  parts.  This  resulted  in  a  system  in  which  the  lengths  of  daylight 
and  nighttime  hours  varied  with  the  seasons.  In  summer,  an  hour  of  daylight  was 
longer  than  an  hour  of  darkness;  in  winter,  the  situation  was  reversed.  Only  at 
the  equinoxes  were  hours  of  day  and  night  of  equal  length.  When  this  system  of 
temporal  hours  spread  throughout  Europe,  it  became  a  function  of  latitude  as  well 
as  season.  It  continued  in  civil  use  until  the  spread  of  mechanical  clocks  in  the 
fifteenth  and  sixteenth  centuries  encouraged  the  gradual  acceptance  of  equal  hours. 

Our  familiar  system  of  24  equal  hours  comes  from  Greek  astronomy.  At  least 
as  early  as  Hipparchus,  the  Egyptian  system  of  24  temporal  hours  was  merged  with 
the  Babylonian  division  of  the  day  into  360  equal  units.  The  result  was  a  system  of 
24  equal  hours,  with  each  hour  divided  into  60  minutes  (Neugebauer,  1975).  This 
established  a  tradition  for  astronomical  tables  that  continues  to  this  day. 

Although  their  origin  is  a  mystery,  mechanical  clocks  were  in  use  in  Europe 
near  the  beginning  of  the  fourteenth  century.  They  were  driven  by  weights  and 
controlled  with  the  recently  invented  escapement.  A  regulating  device  allowed  the 
clocks  to  be  adjusted,  morning  and  evening,  to  maintain  temporal  hours.  They  did 
not  provide  adequate  standards  for  scientific  timekeeping,  but  were  built  for  public 
use. 

In  the  mid-seventeenth  century,  the  pendulum  was  successfully  applied  to  clocks. 
By  the  late  eighteenth  century,  clocks  were  improved  to  provide  accurate  time  for 
scientific  purposes  and  for  navigation  at  sea. 

Useful  surveys  of  the  history  of  timekeeping  are  provided  by  Andrewes  and 
Atwood  (1983),  Landes  (1983),  and  Whitrow  (1988). 

2.52   Apparent  Solar  Time,  Mean  Solar  Time,  and  the  Equation  of  Time 

Apparent  solar  time  is  the  measure  of  time  defined  by  the  actual  diurnal  motion  of 
the  Sun.  If  the  Sun's  right  ascension  increased  at  a  uniform  rate,  solar  days  would 
be  equal  in  length  throughout  the  year  (assuming  uniform  rotation  of  the  Earth). 
Apparent  solar  time  would  then  provide  a  uniform  measure  of  time.  However,  the 
Sun's  motion  in  right  ascension  is  not  uniform  because  the  Sun  moves  in  the  ecliptic 
rather  than  the  equator,  and  the  Sun's  motion  in  the  ecliptic  is  not  uniform. 

Mean  solar  time  was  defined  by  the  motion  of  an  abstract  fiducial  point,  which 
came  to  be  known  as  the  fictitious  mean  sun.  This  point  was  posited  to  move 
uniformly  in  the  equatorial  plane  at  a  rate  that  is  virtually  equal  to  the  mean  rate 
of  the  true  Sun's  motion  in  the  ecliptic.  The  difference  between  mean  solar  time 
and  apparent  solar  time  is  called  the  equation  of  time.  It  is  never  larger  than  16 
minutes. 

The  concept  of  mean  solar  time,  together  with  the  principles  for  determining  the 
equation  of  time,  extend  back  at  least  to  Ptolemy.  For  Ptolemy  and  his  successors, 
mean  solar  time  was  useful  for  constructing  tables  of  solar  motion.  But  as  long  as 


2  /  TIME  75 

the  only  means  of  obtaining  accurate  time  was  by  direct  astronomical  observation, 
apparent  solar  time  was  in  general  use.  Determinations  of  local  apparent  time  were 
commonly  made  by  observing  altitudes  of  the  Sun  or  stars.  Thus  apparent  solar  time 
was  the  argument  in  The  Nautical  Almanac  and  other  national  ephemerides  until 
the  early  nineteenth  century.  Mean  time,  when  needed,  was  obtained  by  applying 
the  equation  of  time  to  the  apparent  time. 

The  equation  of  time,  in  the  sense  of  the  correction  to  be  applied  to  apparent 
time  in  order  to  obtain  mean  time,  was  tabulated  in  the  national  ephemerides 
from  their  earliest  inception.  It  was  used  for  regulating  clocks  and  determining  the 
argument  for  entering  astronomical  tables.  During  the  late  eighteenth  and  early 
nineteenth  centuries,  as  clocks  were  improved  and  came  into  extensive  use  at  sea, 
apparent  time  was  gradually  superseded  in  civil  use  by  mean  solar  time. 

In  the  mid-nineteenth  century,  when  mean  time  was  first  introduced  as  the 
argument  in  the  national  ephemerides,  the  equation  of  time  was  supplemented  by 
an  ephemeris  of  sidereal  time  at  mean  noon.  This  provided  a  means  of  calculating 
mean  solar  time  from  sidereal  time,  without  using  the  equation  of  time.  Clocks  were 
not  sufficiently  perfected  for  the  theoretical  distinction  between  apparent  sidereal 
time  and  mean  sidereal  time  to  be  of  any  practical  importance.  This  distinction  was 
therefore  disregarded,  and  the  very  imperfect  expressions  then  in  use  for  nutation 
were  of  no  consequence  for  the  purpose  of  time  determination. 

The  Riefler  clock,  introduced  about  1890,  was  the  earliest  timepiece  with  an 
accuracy  comparable  to  determinations  of  time  from  observation.  As  the  accuracy 
of  clocks  increased,  the  explicit  recognition  of  mean  sidereal  time  as  distinguished 
from  apparent  sidereal  time  became  necessary.  The  term  uniform  sidereal  time  was 
often  used  at  first,  but  this  measure  was  not  strictly  uniform,  and  the  term  was 
dropped  from  use. 

After  the  introduction  of  the  Short  free-pendulum  clock  in  1921,  the  removal 
of  the  short-period  terms  of  nutation  from  the  observed  clock  corrections  was  nec- 
essary in  order  to  check  the  clock  satisfactorily.  These  terms  were  included  in  the 
ephemerides  of  the  sidereal  time  at  0h,  beginning  with  1933. 

The  equation  of  time  came  to  signify  the  opposite  of  the  original  concept. 
Apparent  solar  time  was  obtained  by  applying  the  equation  of  time  to  the  mean 
time  kept  by  clocks,  which  were  regulated  by  determinations  of  mean  time  from 
observations  of  sidereal  time.  The  link  between  mean  solar  time  and  sidereal  time 
was  founded  on  the  relation 

mean  solar  time  at  Greenwich  =  GHAQ  —  Rq  +  12h,  (2.52-1) 

where  GHAQ  is  the  Greenwich  hour  angle  of  the  mean  equinox  of  date  (i.e.,  Green- 
wich mean  sidereal  time)  and  RQ  is  the  right  ascension  of  the  fictitious  mean  Sun. 

Underlying  the  concept  of  mean  solar  time  was  the  assumption  that  the  rotation 
of  the  Earth  was  uniform.  In  the  first  half  of  the  twentieth  century,  this  assumption 


76  EXPLANATORY  SUPPLEMENT 

was  repudiated  (see  Section  2.53),  with  the  result  that  mean  solar  time  was  no  longer 
used  in  precise  timekeeping.  It  was  replaced  by  two  concepts:  ephemeris  time  was 
introduced  to  satisfy  the  desire  for  a  uniform  measure  of  time,  and  Universal  Time 
(originally  introduced  to  specify  Greenwich  mean  time  measured  from  midnight 
instead  of  noon — see  Section.  2.521)  came  to  designate  a  measure  of  the  Earth's 
rotation. 

Over  the  centuries,  the  exact  definition  of  mean  solar  time,  and  hence  of  the 
equation  of  time,  evolved  as  new  tables  for  the  motion  of  the  Sun  were  introduced. 
In  analyzing  historical  observations  that  are  expressed  in  mean  time,  care  must  be 
taken  to  determine  what  definition  was  used  in  the  reductions. 

2.521  Greenwich  Mean  Time  Prior  to  1925,  mean  solar  time  was  reckoned  from 
noon  in  astronomical  practice.  The  mean  solar  day  beginning  at  noon,  12"  after  the 
midnight  at  the  beginning  of  the  same  civil  date,  was  known  as  the  astronomical 
day.  Mean  solar  time  reckoned  from  mean  noon  on  the  meridian  of  Greenwich  was 
designated  Greenwich  Mean  Time  (GMT).  Local  mean  time  (LMT)  was  reckoned 
from  mean  noon  on  a  local  meridian.  Beginning  with  the  national  ephemerides  for 
1925,  a  discontinuity  of  12h  was  introduced  in  the  tabular  arguments,  so  the  instant 
designated  December  31.5  in  the  volumes  for  1924  was  designated  January  1.0  in 
the  volumes  for  1925. 

In  The  Nautical  Almanac,  the  designation  Greenwich  Mean  Time  (GMT)  was 
still  used  for  the  new  reckoning,  together  with  local  mean  time  where  appropriate, 
whereas  in  The  American  Ephemeris  the  designation  Greenwich  Civil  Time  (GCT) 
was  adopted,  together  with  local  civil  time  (LCT).  This  confusion  in  terminology 
was  finally  removed  by  dropping  both  designations  and  substituting  Universal  Time 
(UT).  Care  is  necessary  to  avoid  confusion.  To  distinguish  between  the  two  reckon- 
ings that  have  both  been  called  Greenwich  Mean  Time,  the  designation  Greenwich 
Mean  Astronomical  Time  (GMAT)  should  be  used  for  the  reckoning  from  noon. 
The  designation  UT  always  refers  to  time  reckoned  from  Greenwich  midnight,  even 
for  epochs  before  1925. 

In  addition,  it  should  be  noted  that  in  the  United  Kingdom,  Greenwich  Mean 
Time  has  meant  the  civil  time  or  Coordinated  Universal  Time  (UTC).  For  naviga- 
tion, Greenwich  Mean  Time  has  meant  UT1  (see  Section  2.24).  Thus  GMT  has  two 
meanings  that  can  differ  by  as  much  as  0!9.  For  these  reasons  GMT  should  not  be 
used  for  precise  purposes. 

2.53   Rotation  of  the  Earth 

The  continued  failure  of  successive  lunar  theories  to  represent  the  observed  motion 
of  the  Moon  gradually  led  to  the  realization  that  the  rotation  of  the  Earth  is  not 
uniform.  In  ephemerides  calculated  from  gravitational  theories,  the  tabular  times 
are  the  values  of  a  uniform  measure  of  time,  quite  independent  of  the  variable 


2  /  TIME  77 

rotation  of  the  Earth.  Consequently,  the  observed  hour  angle  of  a  celestial  body 
(which  increases  with  the  Earth's  rotation)  differs  from  the  position  tabulated  in 
the  ephemeris.  An  analysis  of  the  discrepancies  between  observed  and  computed 
positions  reveals  the  difference  between  a  measure  of  the  Earth's  rotation  and  the 
measure  of  a  uniform  gravitational  time.  The  discrepancies  are  most  evident  in  the 
mean  motion  of  the  Moon,  due  to  the  rapidity  of  its  motion  and  the  accuracy  with 
which  the  inequalities  of  motion  can  be  observed.  However,  variations  in  the  Earth's 
rotation  also  produce  discrepancies  in  the  observed  motions  of  the  other  bodies  in 
the  solar  system,  in  proportion  to  the  magnitude  of  their  respective  mean  motions. 

The  first  variation  to  be  recognized  was  a  secular  retardation  of  the  rate  of  ro- 
tation due  to  tidal  interaction  between  the  Earth  and  Moon.  Adams  (1853)  showed 
that  the  observed  secular  acceleration  of  the  mean  motion  of  the  Moon  could  not 
totally  be  produced  by  gravitational  perturbations.  However,  the  validity  of  his  re- 
sults was  hotly  contested.  The  issue  was  resolved  when  Ferrel  (1864)  and  Delaunay 
(1865)  showed  from  dynamical  principles  that  the  tides  exert  a  retarding  action  on 
the  rotation  of  the  Earth,  accompanied  by  a  variation  of  the  orbital  velocity  of  the 
Moon  in  accordance  with  the  conservation  of  momentum. 

Newcomb  (1878)  considered  the  possibility  of  irregular  variations  of  the  Earth's 
rotation  as  an  explanation  of  lunar  residuals.  In  the  end,  however,  he  could  not 
find  collaboration  from  planetary  data  (Newcomb,  1912).  Some  of  the  difficulties 
faced  by  Newcomb,  and  prior  astronomers,  resulted  from  inadequacies  in  the  lunar 
theory.  This  situation  was  rectified  when  Brown  (1919)  introduced  his  new  tables.  A 
number  of  studies  offered  increasing  evidence  of  irregular  variations  in  the  Earth's 
rotation.  Most  important  were  papers  by  de  Sitter  (1927)  and  Spencer  Jones  (1939), 
which  correlated  irregularities  in  the  Moon's  motion  with  irregularities  of  the  inner 
planets. 

Meanwhile,  the  accuracy  of  crystal-controlled  clocks  was  becoming  comparable 
with  that  of  the  rotation  of  the  Earth.  By  comparing  the  observed  rates  of  the 
clocks  of  national  time  services,  Stoyko  (1937)  found  a  periodic  seasonal  variation 
in  the  rate  of  rotation. 

The  Earth's  rotation  rate  was  therefore  understood  to  have  secular,  irregular, 
and  periodic  variations.  Since  mean  solar  time  was  determined  directly  from  sidereal 
observations,  it  could  no  longer  be  considered  uniform. 


2.54   Universal  Time 

Newcomb  (1898)  gave  the  following  expression  for  the  right  ascension  of  the  ficti- 
tious mean  Sun: 


RG)  =  18h38m45=836  + 86401 84?542r+0;0929r2, 


(2.54-1) 


78  EXPLANATORY  SUPPLEMENT 

where  T  is  measured  in  Julian  centuries  from  1900  January  0,  0h  Greenwich  mean 
noon.  This  expression  differs  from  that  of  the  mean  longitude  of  the  Sun  by  only 
a  slight,  progressively  increasing  excess  of  0?0203  T2.  This  difference  is  due  to  the 
secular  acceleration  of  the  Sun  and  to  the  different  rates  of  general  precession  on 
the  ecliptic  and  on  the  equator. 

By  inserting  Equation  2.54-1  into  the  formula  for  mean  solar  time,  Equa- 
tion 2.52-1,  and  evaluating  the  result  at  0h  mean  solar  time  on  the  Greenwich 
meridian,  we  obtain  the  Greenwich  mean  sidereal  time  at  0h  mean  solar  time: 

GHAQo  =  6h38m45*836  +  86401841542  T  +  0?0929  T2,  (2.54-2) 

where  T  takes  on  successive  values  at  a  uniform  interval  of  1  /  36525.  But  because 
the  rotation  of  the  Earth  is  not  uniform,  values  calculated  from  this  expression  are 
not  consistent  with  observed  hour  angles  of  stars. 

From  the  beginning  of  the  century  through  1959,  these  formulas  were  used 
in  the  British  Nautical  Almanac  and  in  the  American  Ephemeris  to  define  mean 
solar  time  and  to  relate  solar  time  and  sidereal  time.  As  given  by  Newcomb,  the 
independent  variable  in  Equation  2.54-1  is  consistent  with  that  of  his  solar  tables. 

As  evidence  accumulated  that  the  Earth  did  not  rotate  uniformly,  Newcomb's  T 
was  interpreted  as  the  independent  variable  of  the  Earth's  orbital  revolution  rather 
than  its  axial  rotation.  Since  Newcomb's  tables  were  the  basis  of  the  fundamental 
ephemerides  of  the  inner  planets,  the  independent  variable  of  his  tables  was  called 
ephemeris  time  (ET).  It  became  associated  with  the  concept  of  a  uniform  measure 
of  time,  based  on  the  laws  of  orbital  dynamics. 

To  clarify  notation,  7"e  (expressed  in  Julian  centuries  of  36525  ephemeris  days 
from  1900  January  0,  12h  ET)  can  be  used  in  Equation  2.54-1  to  signify  ephemeris 
time.  Then  #q(7e)  =  Re  defines  a  uniformly  moving  fiducial  point  that  is  indepen- 
dent of  the  Earth's  rotation. 

To  make  Equation  2.54-2  consistent  with  observed  hour  angles  of  the  stars, 
Universal  Time  (UT)  was  instituted  as  a  measure  of  the  Earth's  rotation.  Then 
Equation  2.54-1  becomes  a  definition  of  UT,  with  7\i  (measured  in  Julian  centuries 
of  36525  days  of  Universal  Time  from  1900  January  0,  12h  UT)  serving  as  the 
independent  variable:  Rq(Tv)  -Rv.  The  difference  between  RE  and  Ry  is  given  by 

/?E  -  J?u  =  0. 002738A7\  (2.54-3) 

where  AT  is  the  difference  between  ephemeris  time  and  Universal  Time  (AT  — 
ET  -  UT). 

Prior  to  1960,  the  designation  "Right  Ascension  of  Mean  Sun+  12""  was  some- 
times applied  to  tabulations  of  Greenwich  sidereal  time  at  0h  UT.  This  inexact 


2  /  time  79 

terminology  was  dropped  when  the  distinction  between  ephemeris  time  and  Uni- 
versal Time  was  introduced  in  national  ephemerides  in  1960.  Equation  2.54-2,  with 
Tu  as  the  independent  variable,  was  used  during  the  period  1960-1983  to  calculate 
tabular  values  of  Greenwich  mean  sidereal  time  at  0h  UT.  Beginning  with  ephemer- 
ides for  1984,  Equation  2.24-1  has  served  as  the  defining  relation  between  Universal 
Time  and  sidereal  time  {see  Section  2.24). 


2.55   Ephemeris  Time 

From  evidence  compiled  by  de  Sitter  (1927)  of  fluctuations  in  the  Earth's  rotation, 
Danjon  (1929)  recognized  that  mean  solar  time,  which  was  observationally  tied  to 
the  rotation  of  the  Earth,  did  not  satisfy  the  need  for  a  uniform  timescale.  Be  sug- 
gested using  the  timescale  of  the  Newtonian  laws  of  planetary  motion.  His  call  for 
reform,  appearing  in  a  nontechnical  journal,  was  perhaps  unnoticed  by  specialists; 
certainly  it  was  unheeded.  Two  decades  later,  Clemence  (1948)  published  a  more 
specific  proposal,  apparently  without  being  aware  of  Danjon's  paper  (Clemence, 
1971).  From  the  results  of  Spencer  Jones  (1939),  Clemence  derived  the  factor  AT 
that  would  reduce  Universal  Time  to  the  measure  defined  by  Newcomb's  tables.  In 
addition,  Clemence  determined  the  correction  to  Brown's  lunar  theory  that  would 
make  the  independent  variable  of  the  lunar  theory  consistent  with  that  of  New- 
comb's Sun.  Thus  a  comparison  of  lunar  observations  with  Brown's  (corrected) 
theory  could  be  used  to  determine  AT. 

In  1948  a  proposal  to  establish  a  more  uniform  fundamental  standard  of  time 
was  referred  by  the  Comite  International  des  Poids  et  Mesures  to  the  Interna- 
tional Astronomical  Union.  This  proposal  was  considered  at  the  Conference  on  the 
Fundamental  Constants  of  Astronomy  held  at  Paris  in  1950.  At  this  conference, 
Clemence  proposed  using  the  measure  of  time  defined  by  Newcomb's  Tables  of  the 
Sun.  The  Conference  adopted  a  resolution  recommending  that  this  measure  of  time 
be  adopted,  be  expressed  in  units  of  the  sidereal  year  at  1900.0,  and  be  designated 
by  the  name  ephemeris  time,  as  suggested  by  Brouwer.  This  recommendation  was 
adopted  in  1952  by  the  International  Astronomical  Union  at  its  General  Assembly 
in  Rome. 

Upon  further  consideration,  the  tropical  year,  which  was  considered  more  fun- 
damental than  the  sidereal  year,  was  chosen  as  the  unit  of  time.  Accordingly,  the 
Comite  International  des  Poids  et  Mesures,  at  its  session  in  September  1954  in 
Paris,  proposed  to  the  10th  General  Conference  on  Weights  and  Measures  that  the 
fundamental  unit  of  time  be  the  second,  redefined  as  1/31556925.975  of  the  length 
of  the  tropical  year  for  1900.0.  The  Conference  authorized  the  Comite  to  adopt 
this  unit  after  formal  action  on  the  definition  had  been  taken  by  the  International 
Astronomical  Union. 

The  IAU,  at  its  General  Assembly  in  Dublin  in  September  1955,  approved  the 
definition  proposed  by  the  Comite.  However,  the  tropical  year  was  understood  to 


80  EXPLANATORY  SUPPLEMENT 

be  the  mean  tropical  year  defined  by  Newcomb's  expression  for  the  geometric  mean 
longitude  of  the  Sun;  the  value  of  the  second  required  for  exact  agreement  with 
Newcomb's  tables  is  1/31556925.97474  of  the  tropical  year.  The  primary  unit  of 
ephemeris  time  was  the  tropical  year  at  the  fundamental  epoch  of  1900  January 
0,  12h  ET.  The  tropical  year  was  defined  as  the  interval  during  which  the  Sun's 
mean  longitude,  referred  to  the  mean  equinox  of  the  date,  increased  by  360°.  The 
adopted  measure  of  this  unit  was  determined  by  the  coefficient  of  T,  measured  in 
centuries  of  36525  ephemeris  days,  in  Newcomb's  expression  for  the  geometric  mean 
longitude  of  the  Sun  (referred  to  the  mean  equinox  of  date): 

L  =  279°41 '  48  "04  +  1 29602768'.'  13T+  1  "089  T2.  (2.55- 1 ) 

The  tropical  year  at  1900  January  0,  12h  ET  accordingly  contained 

360  x  60  x  60  ^  ^        Q  =    1556925_  9?47  ephemeris  seconds.  (2.55-2) 

129602768.13 

Consequently,  the  Comite  at  its  session  in  Paris  in  October  1956,  under  the  author- 
ity given  by  the  10th  General  Conference,  adopted  in  place  of  the  value  formerly 
recommended  a  slightly  more  precise  value  of  the  tropical  year  at  1900  January  0, 
12h  ET:  "La  seconde  est  la  fraction  1/31556925.9747  de  l'annee  tropique  pour  1900 
janvier  0  a  12  heures  de  temps  des  ephemerides,"  (Proces  Verbaux  des  Seances, 
1957). 

At  this  session,  a  Comite  Consultatif  pour  la  Definition  de  la  Seconde  was  estab- 
lished to  coordinate  the  work  of  physicists  on  atomic  standards  and  of  astronomers 
on  the  astronomical  standard  of  ephemeris  time.  In  1960,  the  11th  Conference  Gen- 
erale  des  Poids  et  Mesures  formally  adopted  the  ephemeris  second  as  a  fraction  of 
the  tropical  year. 

At  its  1958  General  Assembly  in  Moscow,  the  International  Astronomical  Union 
adopted  the  following  definition  for  the  epoch  of  ephemeris  time:  "Ephemeris  time 
is  reckoned  from  the  instant,  near  the  beginning  of  the  calendar  year  A.D.  1900, 
when  the  geometric  mean  longitude  of  the  Sun  was  279°4r48'.'04,  at  which  instant 
the  measure  of  ephemeris  time  was  1900  January  0d12"  precisely." 

With  its  basic  unit  and  initial  epoch  defined  in  this  way,  ephemeris  time  was 
equivalent  to  the  system  of  time  of  Newcomb's  solar  tables.  Newcomb  originally 
identified  this  timescale  with  mean  solar  time,  which  he  considered  to  be  uniform. 
When  mean  solar  time,  as  determined  from  observations,  was  shown  to  be  nonuni- 
form, Newcomb's  timescale  was  identified  directly  with  ephemeris  time.  The  first 
two  terms  of  the  Sun's  geometric  mean  longitude  were  defined  as  absolute  con- 
stants, and  the  corresponding  values  for  the  Moon  and  other  planets  were  subject 
to  possible  revision  to  bring  them  into  accord  with  observation.  The  symbol  T  in 
these  expressions  was  therefore  intended  to  represent  ephemeris  time,  not  only  in 


2  /  TIME 


81 


the  theory  of  the  Earth's  motion  around  the  Sun,  but  also  in  the  heliocentric  the- 
ories of  the  other  planets.  Ephemerides  derived  from  Newcomb's  tables  of  the  Sun 
and  planets  could  therefore  be  regarded  as  having  ephemeris  time  as  the  indepen- 
dent time  argument.  The  mean  longitude  of  any  other  planet,  or  even  of  the  Moon, 
could  have  been  used  to  define  the  origin  and  rate  of  a  uniform  time  system,  and 
ephemerides  of  the  Sun,  Moon,  and  planets  could  have  been  constructed  with  that 
time  system  as  the  independent  argument. 

2.551  The  Determination  of  Ephemeris  Time  In  principle,  the  ephemeris  time  at 
any  moment  can  be  determined  by  comparing  the  observed  positions  of  the  Sun, 
Moon,  and  planets  with  then  corresponding  ephemerides.  The  tabular  time  for 
which  the  observations  agreed  with  the  ephemerides  would  be  the  ephemeris  time. 
In  practice,  Universal  Time,  which  can  be  determined  very  accurately  and  with 
little  delay  from  observations  of  the  diurnal  motions  of  the  stars,  was  used  as  an 
intermediary  measure  of  time.  The  difference  between  the  two  measures  of  time, 
AT  -  ET  —  UT,  was  then  obtained  by  comparing  observations  with  ephemerides. 

Observations  of  the  Moon,  whose  geocentric  motion  is  much  greater  than  those 
of  other  bodies,  provided  the  most  accurate  determination  of  AT.  However,  direct 
comparison  with  the  lunar  ephemeris  calculated  from  Brown's  lunar  tables  did  not 
give  AT  immediately,  since  Brown's  theory  was  not  strictly  gravitational  and  his 
tables  were  not  in  complete  accord  with  Newcomb's  solar  tables.  This  was  rectified 
by  eliminating  the  empirical  term  from  the  mean  longitude  of  the  Moon  and  by 
applying  the  correction  to  the  tabular  mean  longitude: 

AL  =  8'.'72-  26.74r-  11.22T2.  (2.551-1) 

Additional  corrections  were  needed  for  some  of  the  periodic  terms  in  longitude, 
latitude,  and  parallax.  Beginning  in  1960,  the  lunar  ephemeris  was  calculated  from 
this  amended  theory — directly  from  the  theoretical  expressions  for  the  longitude, 
latitude  and  parallax — instead  of  from  Brown's  tables.  The  improved  ephemeris  was 
made  available  for  1952-1959  in  the  Improved  Lunar  Ephemeris  (Nautical  Almanac 
Office,  1954). 

A  distinction  had  to  be  drawn  between  UT  +  AT  and  ET,  when  AT  was  deter- 
mined using  the  previous  equations  and  observations  of  the  Moon.  UT+AF  differed 
from  ET  in  two  main  respects: 

(1)  by  a  quadratic  expression  in  T  of  the  form  a  +  bT  +  cT2,  the  coefficients  of 
which  had  been  observationally  determined  to  be  zero,  but  which  almost 
certainly  differed  from  zero  by  significant  amounts  (it  should  be  noted  that 
the  term  cT2  is  more  of  a  fundamental  physical  character  than  a  +  bT)\ 

(2)  by  any  deficiencies  that  might  have  been  present  in  Brown's  lunar  theory, 
including  revision  of  any  constants  involved;  in  particular,  Brown  used  1/294 
for  the  flattening  of  the  Earth. 


Q2  EXPLANATORY  SUPPLEMENT 

In  the  period  from  1960  to  1984,  improvements  were  introduced  in  the  lunar 
theory,  and  the  different  versions  of  the  lunar  theory  were  designated  by  j  =  0, 
j  =  1  and  j  =  2.  The  ephemeris  times  determined  from  these  lunar  theories  were 
correspondingly  labeled  ETO,  ET1  and  ET2. 

Thus  the  value  of  A  T  could  differ  systematically  depending  upon  which  method, 
or  body,  was  used  for  its  determination.  This  will  continue  to  be  true  when  AT  is 
extrapolated  back  in  time  prior  to  the  availability  of  atomic  time. 

2.552  Difficulties  in  the  Definition  of  Ephemeris  Time  In  hindsight,  the  definition 
of  ephemeris  time  (ET)  was  subject  to  a  number  of  difficulties,  both  in  concept  and 
in  implementation.  It  was  based  on  Newcomb's  theory  of  the  Sun  and  an  associated 
set  of  astronomical  constants.  Both  the  theory  and  the  constants  were  replaced  in 
1984.  At  a  deeper  level,  however,  ET  suffered  from  its  prerelativistic  origins.  Since 
its  definition  ignored  general  relativity,  ET  cannot  be  categorized  as  a  geocentric 
or  bary centric  timescale,  nor  as  a  proper  time  or  coordinate  time. 

Both  the  fundamental  unit  and  the  epoch  of  ET  contained  technical  problems. 
The  tropical  year  was  chosen  as  the  unit  of  time  under  the  assumption  that  it  was 
independent  of  astronomical  constants,  particularly  the  constant  of  precession.  In 
reality,  determinations  of  both  the  tropical  year  and  the  sidereal  year  depend  on 
the  adopted  system  of  astronomical  constants.  Unfortunately,  the  possibility  of  a 
time-dependent  variation  in  the  equinox,  commonly  called  equinox  motion,  was  not 
recognized.  As  a  result,  ephemeris  time  was  subject  to  corrections  introduced  in 
the  system  of  constants  in  1984. 

The  fundamental  epoch,  designated  1900  January  0,  12h  ET,  was  the  instant 
at  which  the  geometric  mean  longitude  of  the  Sun,  referred  to  the  mean  equinox 
of  date,  was  279°4r48!'04.  Although  this  instant  was  definitive,  its  determination 
depended  on  a  comparison  of  observations  with  an  apparent  ephemeris  of  the  Sun. 
The  observations  were  themselves  definitive,  but  the  apparent  ephemeris  as  deduced 
from  the  geometric  mean  longitude  depended  on  the  value  adopted  for  the  constant 
of  aberration.  All  relevant  observations  and  determinations  had  been  made  using 
20'.'47  for  the  constant  of  aberration.  A  change  in  this  value  would  lead  to  a  change 
in  the  determination  of  the  instant  of  the  fundamental  epoch  and,  thus,  to  a  corre- 
sponding  change  in  the  measures  of  ephemeris  time  assigned  to  all  other  instants. 
This  particular  difficulty  could  have  been  avoided  by  specifying  the  epoch  as  the 
instant  when  the  geometric  mean  longitude  of  the  Sun,  reduced  by  the  constant  of 
aberration  and  referred  to  the  mean  equinox  of  date,  was  279°4r27'.'57;  but  there 
were  objections  to  the  implied  use  of  an  "apparent  mean  longitude." 

Ephemeris  time  was  defined  by  the  motion  of  a  body  that  is  difficult  to  observe. 
Determination  of  ET  was  better  accomplished  by  observations  of  rapidly  moving 
bodies — the  Moon,  Mercury,  and  Venus.  However,  there  was  no  specified  relation- 
ship between  ET  as  defined  and  ET  as  determined  from  observations  of  the  Moon, 
Mercury,  or  Venus.  In  practice,  the  determination  of  ET  from  the  motion  of  the 


2  /  TIME  83 

Moon  was  based  on  accepted  values  of  various  constants.  Changes  in  the  constants 
resulted  in  different  measures  of  ET,  as  described  in  Section  2.551. 


2.553  AT  Formulas  from  Historical  Observations  The  variations  in  the  rotation 
of  the  Earth  can  be  determined  from  observations,  though  early  observations  are 
much  less  accurate  than  modern  observations.  The  rate  of  rotation  does  not  decrease 
uniformly,  as  it  would  if  tidal  friction  were  the  only  mechanism  affecting  the  Earth's 
rotation. 

The  formulas  for  AT  must  be  divided  into  time  periods.  The  equation  for  the 
time  period  from  1650  to  the  present  is  given  by  McCarthy  and  Babcock  (1986): 

A7XTDT-UT1)  -  5!156(±  0.404)+ 13. 3066(±  0. 3264)(r-0. 19(±  0. 01))2,  (2.553-1) 

where  ( is  given  in  centuries  since  1800.0.  The  equivalent  expression  for  the  length- 
ening of  the  day  is: 

LOD  =  7!286(±  0. 170)  x  I0_6(year  -  1819. 25(±  1.04)).  (2.553-2) 

Tabular  values  of  AT  are  given  by  McCarthy  and  Babcock  (1986)  for  1957-1984 
and  by  Stepenson  and  Morrison  (1984)  for  1630-1980.  Current  values  are  given  in 
the  The  Astronomical  Almanac. 

The  following  expressions  for  historic  periods  are  from  Stephenson  and  Morrison 
(1984).  A  parabolic  representation  of  the  data  from  A.D.  948  to  A.D.  1600  is  given 

by 

AT  =  25*5^,  (2.553-3) 

where  t  is  time  in  centuries  from  A.D.  1800.  This  result  is  equivalent  to  a  rate  of 
lengthening  of  the  day  of  1.4ms/century. 

For  the  period  from  390  B.C.  to  A.D.  948  the  parabolic  representation  is 

AT  =  1850s  -  435r  +  44.  3t2,  (2.553-4) 

where  r  is  measured  in  centuries  from  A.D.  948.  With  the  origin  at  A.D.  1800,  the 
corresponding  expression  is 

AT=  1360s  +  3201  +  44.3^.  (2.553-5) 

The  equivalent  rate  of  lengthening  of  the  day  is  2.4ms/century  (Stephenson  and 
Morrison,  1984). 


84  EXPLANATORY  SUPPLEMENT 

The  formulas  above  are  based  on  the  value  of  the  lunar  tidal  acceleration  n, 
where  n  =  -26'.'00  century-2.  If  another  value  of  n  is  used,  the  values  of  TDT  -  UT1 
should  be  corrected  by  the  addition  of 


A7TTDT  -  UT1)  -  -1!821<ZW2)(T-  19.55),  (2.553-6) 

where  T  is  measured  in  Julian  centuries  from  1900.0  (McCarthy  and  Babcock, 
1986). 


2.56   History  of  Atomic  Time 

Until  1960,  the  unit  of  time,  the  second,  was  defined  as  a  specified  fraction  (1/86400) 
of  the  mean  solar  day.  With  the  adoption  of  ephemeris  time,  the  second  was  defined 
to  be  a  specified  fraction  of  the  year  (see  Section  2.55).  This  definition  was  more 
precise  than  the  definition  based  on  the  mean  solar  day,  but  it  was  difficult  to 
measure  from  observational  data  and  to  implement  with  operational  clocks. 

The  idea  of  using  atomic  resonances  in  an  atomic  clock  is  due  to  Rabi,  who 
suggested  it  in  an  American  Physical  Society  lecture  in  January  1945.  The  first 
atomic  clock  in  actual  metrological  use  was  built  at  the  National  Physical  Labo- 
ratory (NPL)  by  Essen  and  Parry  (1957).  Details  of  the  early  developments  are 
described  by  Ramsey  (1972),  Beehler  (1967),  and  Foreman  (1985). 

Since  1967,  the  Systeme  International  (SI)  second  (see  Section  2.21)  has  been 
the  standard  unit  of  time  in  all  timescales.  The  length  of  the  SI  second  was  defined 
by  Markowitz  et  al.  (1958)  in  terms  of  the  observationally  determined  value  of  the 
second  of  ephemeris  time.  Thus,  the  SI  second  closely  matches  an  ephemeris  second 
and  provides  continuity  with  ephemeris  time. 

Beginning  in  July  1955,  atomic  timescales  were  available  from  organizations  in 
several  countries.  These  were  based  on  the  cesium-beam  frequency  standards  at  the 
individual  organizations.  In  1971,  the  experimental  atomic  timescale  established 
by  the  Bureau  International  de  l'Heure  (BIH)  was  adopted  as  the  worldwide  time 
reference  system,  under  the  name  Internationa]  Atomic  Time  (TAI).  As  this  decision 
implied  no  discontinuity  of  the  BIH  timescale,  it  is  convenient  to  designate  it  as 
TAI  since  its  beginning  in  July  1955.  The  origin  of  TAI  was  arbitrarily  chosen  so 
that  the  TAI  and  UT1  readings  at  1958  January  1,  0h  were  the  same. 

Since  1971,  TAI  computation  has  undergone  two  major  conceptual  changes. 
In  1973,  as  a  consequence  of  the  1972  meeting  of  the  Consultative  Committee 
for  the  Definition  of  the  Second  (CCDS),  a  new  TAI  algorithm  was  implemented, 
whereby  each  clock  participates  with  a  weight  that  is  a  function  of  its  past  and 
present  frequency.  The  mean  frequency  of  each  clock  over  a  two-month  interval 
is  computed  with  respect  to  TAI.  The  weight  of  a  clock  is  proportional  to  the 
reciprocal  of  the  variance  of  six  mean  frequencies.  This  takes  into  account  the 
changes  of  frequency  or  the  short-term  instability  of  the  clock.  The  other  change  in 


2  /  TIME  85 

TAI  took  place  in  1977.  In  1976,  three  laboratories  maintaining  cesium  standards-- 
the  National  Bureau  of  Standards,  National  Research  Council,  and  the  Physicalisch- 
Technische  Bundesanstalt — agreed  that  the  frequency  of  TAI  was  too  high  by  10-12. 
That  same  year,  IAU  recommended  that  the  TAI  frequency  be  corrected  by  exactly 
—  10  x  10-13  on  1977  January  1.  This  adjustment  was  the  first  direct  input  of  the 
laboratory  standards  on  TAI. 

In  April  1977,  the  Consultative  Committee  for  the  Definition  of  the  Second 
recommended  that  frequency  steering  by  frequent,  small  adjustments  (of  the  same 
order  as  the  variations  expected  from  random  noise)  was  better  than  noticeable 
corrections  at  less  frequent  intervals.  This  practice  was  applied  immediately  to 
TAI. 

In  1985  the  IAU  adopted  a  resolution  agreeing  to  transfer  the  responsibility  for 
TAI  from  the  BIH  to  the  Bureau  International  des  Poids  et  Measures,  under  the 
responsibility  of  the  International  Committee  on  Weights  and  Measures  (CIPM) 
and  the  General  Conference  of  Weights  and  Measures. 


2.57   History  of  Coordinated  Universal  Time 

Beginning  in  1962,  an  increasing  number  of  broadcast  time  services  cooperated  to 
provide  a  consistent  time  standard.  Most  broadcast  signals  were  synchronized  to 
the  redefined  UTC  in  1972.  Prior  to  1972,  broadcast  time  signals  were  kept  within 
0.1  second  of  UT2  by  introducing  step  adjustments,  normally  of  0.1  second,  and 
occasionally  by  changing  the  duration  of  the  second.  The  scale  UT2  resulted  from 
applying  the  following  formula  for  the  seasonal  variation  in  the  rate  of  the  Earth's 
rotation  to  UT1: 

UT2  =  UT1  +  0!022  sin  2ttt  -  0!012 cos 2?rr  -  0?006 sin 4ttt  +  0!007 cos47rr,  (2.57-1 ) 

where  r  represents  the  fraction  of  the  Besselian  year  of  the  observation. 

The  seasonal  variation  in  the  rotation  of  the  Earth  was  first  detected  by  means 
of  excellent  crystal  clocks  at  the  Physicalisch-Technische  Bundesanstalt  (Scheibe 
and  Adelsberger,  1936).  These  variations  were  confirmed  by  Stoyko  (1936,  1937), 
Finch  (1950),  and  Smith  and  Tucker  (1953).  Lunar  tidal  variations  were  found  to 
be  in  reasonable  agreement  with  the  theory.  More  recent  reports  are  available  by 
O'Hara  (1975),  Guinot  (1970),  and  Markowitz  (1976).  Previously,  the  research  on 
long-term  variations  in  the  rotation  of  the  Earth  was  correlated  with  the  motion 
of  the  Moon,  which  was  the  only  clock  available  with  sufficient  precision  (Spencer 
Jones,  1956;  Munk  and  McDonald,  1960).  Now  UTC  is  based  on  UT1  as  specified 
in  Section  2.24. 


86 

2.58    History  of  Transmitted  Time  Signals 


EXPLANATORY  SUPPLEMENT 


Prior  to  1956,  the  transmitted  time  signals  were  stepped  or  steered  to  maintain 
a  constant  relationship  to  the  rotation  of  the  Earth.  From  1956  to  1971,  various 
approaches  were  used  by  different  organizations  to  maintain  the  transmitted  signals 
close  to  the  value  of  time  determined  from  the  Earth's  rotation.  After  1971,  all  the 
transmissions  were  tied  to  UTC  as  determined  by  the  BIH.  For  the  period  1956- 
1971  it  is  possible  to  obtain  a  correction  to  the  transmitted  time  signal  from  the 
available  documentation  of  the  history  of  the  transmission  during  that  time  period. 

The  Bureau  International  de  PHeure,  located  at  the  Paris  Observatory,  was 
founded  to  coordinate  the  practices  followed  by  the  national  time  services  in  ob- 
servations and  calculations  for  the  determination  of  time,  and  to  establish  precise 
international  standards;  it  came  under  the  auspices  of  the  International  Astronom- 
ical Union  in  1920. 

In  1988,  the  BIH  activities  on  astronomical  time  were  taken  over  by  a  new 
service  with  a  wider  scope — the  International  Earth  Rotation  Service  (IER.S),  the 
Central  Bureau  of  which  is  located  at  the  Paris  Observatory.  The  responsibility  of 
atomic  timescales  has  been  transferred  from  the  BIH  to  the  Bureau  International 
des  Poids  et  Mesures  (BIPM)  in  Sevres,  France. 

Table  2.58.1  provides  the  documentation  of  the  steps  and  frequency  changes 
utilized  by  radio  station  WWV.  In  countries  where  the  civil  time  system  was  not 
the  same  as  WWV,  a  different  table  of  corrections  appropriate  to  the  civil  time 
system  actually  used  should  be  introduced,  if  available. 


Table  2.58.1 

Time  and  Frequency  Steps  by  WWV  and  MC  (USNO) 


Dale 


MJD  UT 


Step* 


Notes 


1956 


1957 


Jan.  4 

35476 

1900 

60  advance 

Mar.  7 

35539 

1900 

20  advance 

Mar.  28 

35560 

1900 

20 

July  25 

35679 

1900 

20 

Aug.  22 

35707 

1900 

20 

Sept.  19 

35735 

1900 

20 

Oct.  31 

35777 

1900 

20 

Nov.  14 

35791 

1900 

20 

Jan.  23 

35861 

1900 

20 

Mar.  13 

35910 

2000 

20 

May  1 

35959 

1900 

20 

June  5 

35994 

2000 

20 

June  19 

36008 

1900 

20 

July  3 

36022 

1900 

20 

July  17 

36036 

1900 

20 

Aug.  14 

36064 

1900 

20 

Oct.  16 

36127 

1900 

20 

Nov.  6 

36148 

1900 

20 

Dec.  1 1 

36183 

1900 

20 

On  1 957  March  1 3,  ihe  time  step  made  at  1 900  UT 
was  obtained  from  log  books,  but  the  step  made  at 
2000  UT  was  from  TS  Bulletins. 


Table  2.58.1,  continued 

Time  and  Frequency  Steps  by  WWV  and  MC  (USNO) 


Date 

MJD 

UT 

Step* 

Notes 

1958 

Jan.  15 

36218 

1900 

20 

WWV  controlled  at  an  offset  of  about  -100  x 

Feb.  5 

36239 

1900 

20 

10~ 10  during  1958. 

Feb.  1 9 

36253 

1900 

20 

Apr.  9 

36302 

1900 

20 

June  11 

36365 

1900 

20 

July  2 

36386 

1900 

20 

July  16 

36400 

1900 

20 

Oct.  22 

36498 

1900 

20 

Nov.  26 

36533 

1900 

20 

Dec.  24 

36561 

1900 

20 

1959 

Jan.  28 

36596 

1900 

20 

WWV  controlled  at  an  offset  of  -100  x  10-10 

Feb.  25 

36624 

1900 

20 

during  1 959. 

Aug.  5 

36663 

1900 

20 

Aug.  26 

36806 

1900 

20 

Sept.  30 

36841 

1900 

20 

Nov.  4 

36876 

1900 

20 

Nov.  18 

36890 

1900 

20 

Dec.  16 

36918 

1900 

20 

USNO  began  controlling  NBA  at  an  offset  of 
-170x  10~10  during  1960. 

1960 

No  time  steps 

UTC  began  1960  January  1.t  The  initial  partici- 

pating observatories  and  laboratories  were  USNO, 

RGO,  NBS,  NRL  and  NPL.  The  original  offset  was 

-150  x  10-10.  No  international  UTC  offset  was  in 

effect  before  1960. 

1961 

Jan.  1 

37300 

0000 

5 

UTC  otfset  during  1961  was  -150  x  10~10. 

1962 

Aug.  1 

37512 

0000 

50  advance 

UTC  offset  during  1962  was  -130  x  10-10. 

No  time  steps 

1963 

Nov.  1 

38334 

0000 

100 

UTC  offset  during  1963  was  -130  x  10-10. 

1964 

Apr.  1 

38486 

oooo 

100 

UTC  offset  during  1964  was  -150  x  10~10. 

Sept.  1 

38639 

0000 

100 

Oct.  1 

38669 

0000 

1 

MC(USNO)  advanced  J. 6  milliseconds  1 0  October, 
1964.  WWV  retarded  1.0  milliseconds  10  October, 
1964. 

1965 

Jan.  1 

0000 

100 

UTC  offset  during  1965  was  -150  x  10~10. 

Mar  1 

38820 

0000 

100 

July  1 

38942 

0000 

100 

Sept.  1 

39004 

0000 

100 

1966 

No  time  steps 

UTC  offset  during  1966  was  -300  x  10~10. 

1967 

Sept.  20 

39753 

0000 

200  p.  advance 

WWV  only;  MC(USNO)  was  not  advanced  1967 

1968      Feb.  1 

1969 
1970 

1971 


39887     0000     100  advance 
No  time  steps 


September  20.  UTC  offset  during  1967  was  -300  x 

io-10. 

UTC  offset  during  1 968  was  -300  x  10 


-10 


UTC  offset  during  1969,  1970,  and  1971  was 
-300  x  10"10. 


*  All  steps  are  retardations  in  milliseconds  unless  otherwise  noted. 
+  See  Trans.  IAU  Reports,  XI A,  362-364. 

Note:  Prior  to  1 956  January  1 ,  WWV  did  not  make  time  steps.  Instead  WWV  steered  its  frequency  to  follow 
closely  the  Earth's  rotation.  Steps  were  therefore  unnecessary.  (The  system  followed  by  WWV  was  the  N2 
system,  used  by  the  U.S.  Naval  Observatory  from  1953  April  1  until  1955  December  31). 


88 


EXPLANATORY  SUPPLEMENT 


2.6  REFERENCES 

Adams,  J.C.  (1853).  "On  the  Secular  Variation  of  the  Moon's  Mean  Motion"  Phil.  Trans. 
CXLIII,  397-406. 

Allan,  D.W.  (1985).  "Characterization  Optimum  Estimation  and  Time  Prediction  of 
Clocks"  Proceedings  of  the  Seventeenth  Annual  Precise  Time  and  Time  Interval  (PTTI) 
Applications  and  Planning  Meeting,  pp.  45-66. 

Allan,  D.W.  (1983).  "Clock  Characterization  Tutorial"  Proceedings  of  Fifteenth  Annual 
Precise  Time  and  Time  Interval  (PTTI)  Meeting,  Washington,  pp.  459-476. 

Allan,  D.W.,  Blair,  B.E.,  Davis,  D.D.,  and  Machlan,  H.E.  (April  1972).  "Precision  and 
Accuracy  of  Remote  Synchronization  via  Network  Television  Broadcasts,  LORAN-C, 
and  Portable  Clocks"  Metrologia  8,  64-72. 

Anderie,  R.J.  (1976).  "Polar  Motion  Determined  by  Doppler  Satellite  Observations"  Re- 
port to  Commission  19.  {Geodes  Bull.  Grenoble). 

Andrewes,  W.  and  Atwood,  S.  (1983).  The  Time  Museum:  An  Introduction  (The  Time 
Museum,  Rockford,  IL). 

Anderson,  O.D.  (1975).  Time  Series  Analysis  and  Forecasting;  The  Box-Jenkins  Approach 
(Butterworth,  London). 

Aoki,  S.,  Guinot,  B-,  Kaplan,  G.H.,  Kinoshita,  H.,  McCarthy,  D.D.,  and  Seidelmann,  P.K. 
(1982).  "The  New  Definition  of  Universal  Time"  Astron.  Astrophys.  105,  359-361. 

Ashby,  N.  (1975),  "An  Earth-Based  Coordinate  Clock  Network"  NBS  Tech.  Note  659  (US 
Govt.  Printing  Office,  Washington,  DC), 

Ashby,  N.  and  Allan,  D.  (1979).  "Practical  Applications  of  Relativity  for  a  Global  Coor- 
dinate Timescale"  Radio  Sci.  14,  649-669. 

Audoin,  C.  (1984).  "Prospects  for  Atomic  Frequency  Standards"  Proceedings  of  the  Six- 
teenth Annual  Precise  Time  and  Time  Interval  (PTTI)  Meeting,  pp.  1-48. 

Bagley,  A.S.  and  Cutler,  L.S.  (1964).  "A  New  Performance  of  the  Flying  Clock  Experi- 
ment" Hewlett-Packard  Journal  15,  11. 

Barnes,  J.A.  (1976).  "Models  for  the  Interpretation  of  Frequency  Stability  Measurements" 
NBS  Technical  Note  683  (U.S.  Govt.  Printing  Office,  Washington,  DC). 

Barnes,  J.A.,  and  Allan,  D.W.  (1964).  "Effects  of  Long-Term  Stability  on  the  Definition 
and  Measurement  of  Short-Term  Stability"  Proc.  IEEE-NASA  Symposium  Short- 
Term  Frequency  Stability  NASA  Spec.  Publ  No.  80,  119-123. 

Becker,  G.  (1974).  Time  Scales  Relativity:  Report  of  Physikalisch-Technische  Bunde- 
sanstalt,  and  acts  of  the  second  Cagliari  Meeting  on  Time  Determination,  Dissemi- 
nation and  Synchronization,  1974.  Editor:  Astron.  Inst,  of  Cagliari,  Italy. 

Becker,  G.,  Fischer,  B.,  Kramer,  G.,  and  Muller,  E.K.  (1967).  "Die  Definition  der  Sekunde 
und  die  aligemeine  Relativitatstheorie"  (The  Definition  of  the  Second  and  the  Theory 
of  General  Relativity).  PTB-Mitt.  77,  111. 

Beehler,  R.E.  (1967).  "A  Historical  Review  of  Atomic  Frequency  Standards"  Proc.  IEEE 
55(6),  792-805.  See  also  Blair  (1974),  85-109. 

Beehler,  R.E.,  Mockler,  R.C.,  and  Richardson,  J.M.  (1965).  "Cesium  Beam  Atomic  Fre- 
quency Standards"  Metrologia  1,  114-131. 

Benavente,  J.,  Besson,  J.,  and  Parcelier,  P.  (1979).  "Clock  Comparison  by  Laser  in  the 
Nanosecond  Range"  Radio  Sci.  14,  4,  701-706. 

Besson,  J,  (1970).  "Comparison  of  National  Time  Standards  by  Simple  Overflight"  IEEE 
Trans.  Instr.  and  Meas.,  IM-19,  4,  227-232. 

BIH  (1973).  Annual  Report  of  the  Bureau  International  de  I'Heure. 


2  I  TIME 


89 


BIH  Circular  D.  (Bureau  international  de  I'Heure,  Paris,  France), 

Blair,  B.E.,  ed.  (1974).  "Time  and  Frequency"  (Red  Book)  Nat  Bur.  Stand  (US)  Monogr. 
No,  140. 

Bodily,  L.N.  (1966).  "Correlating  Time  from  Europe  to  Asia  and  with  Flying  Clocks" 

Hewlett-Packard  Journal  16,  No.  8. 
Box,  G.E.P.,  and  Jenkins,  G.M.  (1970).  Time  Series  Analysis  Forecasting  and  Control 

(Holden-Day,  San  Francisco). 
Brown,  E.W.  (1919).  Tables  of  the  Motion  of  the  Moon  (Yale  University  Press,  New  Haven, 

CT). 

Brunet,  M.,  Freon,  G.,  and  Parcelier,  P.  (1977).  "Comparison  of  Distant  Atomic  Clocks 
with  the  SYMPHONIE  Satellite"  Proc.  Symposium  on  Telecommunication  Measure- 
ment, organized  by  URSI  (Lannion,  France,  3-7  October  1977). 

Buisson,  J.,  McCaskill,  T.,  Morgan,  P.,  and  Woodger,  J.  (1976).  "Precise  Worldwide  Sta- 
tion Synchronization  via  the  NAVSTAR  GPS,  Navigation  Technology  Satellite  (NTS- 
1)"  Proceedings  of  the  Eighth  Annual  Precise  Time  and  Time  Interval  Meeting. 

Capitaine,  N.  and  Guinot,  B.  (1985).  "Anomalies  of  Some  Tidal  Waves  in  UT1"  Geophys 
J.R.  Astr.  Soc.  81,  563.;  C.C.D.S.  (1970).  Comite  Consultatif  pour  la  Definition  de  la 
Seconde,  5e  Session  (Bureau  International  des  Poids  et  Mesures,  Sevres);  CCIR  Docu- 
ments, Study  Group  7  (Standard  Frequencies  and  Time  Signals),  Geneva,  Switzerland. 

Chi,  A.R.  and  Byron,  E.  (1975).  "A  Two-way  Time  Transfer  Experiment  Using  a  Syn- 
chronous Satellite"  Proceedings  of  the  Seventh  Annual  Precise  Time  and  Time  Interval 
(PTTI)  Applications  and  Planning  Meeting,  pp.  357-376. 

Clark,  T.A.  (1972).  "Precision  Timing  and  Very  Long  Baseline  Interferometry  (VLBI)" 
Proc.  Fourth  Annual  NASA  and  Department  of  Defense  Precise  Time  and  Time  In- 
terval Planning  Meeting  GSFC  Report  X-814-73-72,  pp.  74-89  (Goddard  Space  Flight 
Center,  Greenbelt,  MD). 

Clemence,  G.M.  (1948),  "On  the  System  of  Astronomical  Constants"  Astron.  J.  53,  169 
179. 

Cooper,  R.S.  and  Chi,  A.R.  (1979).  "A  Review  of  Satellite  Transfer  Technology:  Accom- 
plishments and  Future  Applications"  Radio  Sci.  14,  4,  605-619. 

Costain,  CO,  Daams,  H.,  Boulanger,  J.S.,  Hanson,  D.W.,  and  Klepczynski,  W.J.  (1978). 
"Two-way  Time  Transfers  between  NRC/NBS  and  NRC/USNO  via  the  Hermes  (CTS) 
Satellite"  Proceedings  of  the  Tenth  Annual  Precise  Time  and  Time  Interval  Meeting. 
Washington  NASA  Technical  Memorandum  80250,  pp.  585-600. 

Costain,  C.C.,  Boulanger,  J.S.,  Daams,  H.,  Hanson,  D.W.,  Beehler,  R.E.,  Clements,  A. J., 
Davis,  D.D.,  Klepczynoki,  W.J.,  Veenstra,  L.,  Kaiser,  J.,  Guinot,  B.,  Azoubib,  P., 
Parcelier,  P.,  Freon,  G,,  and  Brunet,  M.  (1979).  "Two-way  Time  Transfer  via  Geosta- 
tionary Satellites  NRC/NBS,  NRC/USNO  and  NBS/USNO  via  Hermes  and  NRC/LPFT 
(France)  via  Symphonie"  Proceedings  of  the  Eleventh  Annual  Precise  Time  and  Time 
Interval  (PTTI)  Conference  NASA  Conference  Publication  2129,  pp.  499-519. 

Counselman,  CO  (1976),  "Radio  Astrometry"  Annu.  Rev.  Astron.  Astrophys.  14,  197- 
214. 

Danjon,  A.  (1929).  "Le  temps,  sa  definition  practique,  sa  mesure"  L'Astronomie  xliii, 
13-22. 

Danjon,  A.  (1959).  Astronomie  Generate  (Sennac,  Paris). 

Davis,  D.T.,  Weiss,  M.,  Clements,  A.,  and  Allan,  D.W.  (1981).  "Unprecedented  Syntoniza- 
tion  and  Synchronization  Accuracy  via  Simultaneous  Viewing  with  GPS  Receivers; 
Construction  Characteristics  of  an  NBS/GPS  Receiver"  Proceedings  of  the  Thirteenth 


90 


EXPLANATORY  SUPPLEMENT 


Annual  Precise  Time  and  Time  Interval  (PTTI)  Applications  and  Planning  Meeting 

NASA  Conference  Publication  2220,  pp.  527-544. 
Delaunay,  C.E.  (1865).  "Sur  l'existence  d'une  cause  nouvelle  ayant  une  action  sensible  sur 

la  valeur  de  l'equation  seculaire  de  la  Lune"  Compte  Rendu  des  Seances  de  I'Academie 

des  Sciences  61,  1023-1032. 
de  Sitter,  W.  (1927).  "On  the  Secular  Accelerations  and  the  Fluctuations  of  the  Longitudes 

of  the  Moon,  the  Sun,  Mercury  and  Venus"  Bull,  of  the  Astron.  Institues  of  the 

Netherlands  iv,  21-38. 

Essen,  L.  and  Parry,  J.V.L,  (1957).  "The  Cesium  Resonator  as  a  Standard  of  Frequency 

and  Time"  Phil.  Trans.  R.  Soc.  London  Series  A  250,  45-69. 
Farley  et  al.  (1968).  "Is  the  Special  Theory  Right  or  Wrong?"  Nature  217,  17. 
Ferrell,  W.  (1864).  "Note  on  the  Influence  of  the  Tides  in  Causing  an  Apparent  Secular 

Acceleration  of  the  Moon's  Mean  Motion"  Proc.  of  the  American  Academy  of  Arts 

and  Sciences  VI,  379-383. 
Forman,  P.  (1985).  "Atoinichson:  the  Atomic  Clock  from  Concept  to  Commercial  Product" 

Proc.  IEEE  73,  1181. 

Frisch  and  Smith  (1963).  "Measurement  of  Relativistic  Time  Dilation  Using  Meason" 
Amer.  J.  Phys.  31,  342. 

Gerber,  E.A.  and  Sykes,  R.A.  (1966).  "State  of  Art:  Quartz  Crystal  Units  and  Oscillators" 
Proc.  IEEE  54(2),  103-116.  See  also  in  Blair  (1974a),  where  the  authors  give  a  brief 
update  of  the  more  recent  developments  in  a  Part  B. 

Granveaud,  D.M.  and  Guinot,  B.  (1972).  IEEE  Trans.  Instr.  and  Meas.  IM-21,  4,  396. 

Granveaud,  D.M.  (1979).  "Evolution  of  the  International  Atomic  Time  TAI  Computa- 
tion" Proceedings  of  the  Eleventh  Annual  Precise  Time  and  Time  Interval  (PTTI) 
Applications  and  Planning  Meeting  NASA  Conf.  Pub.  2129,  pp.  185-196. 

Guinot,  B.  (1969).  "Formation  de  l'echelle  de  temps  coordonnee  par  le  Bureau  interna- 
tional de  l'heure"  Actes  du  Colloque  international  de  chronometrie  A-20,  Serie  A, 
Paris. 

Guinot,  B.  (1974).  "Review  of  Time  Scales"  Proceedings  of  the  Sixth  Annual  Precise  Time 
and  Time  Interval  (PTTI)  Planning  Meeting  GSFC  X-814-75-117  (Goddard  Space 
Flight  Center,  Greenbelt,  MD). 

Hafele,  J.  and  Keating,  R,  (1972).  "Around-the- World  Atomic  Clocks:  Predicted  Rela- 
tivistic Time  Gains"  Science  177,  166-170. 

Halley,  E.  (1695).  "Some  Account  of  the  Ancient  State  of  the  City  of  Palmyra  with  Short 
Remarks  upon  the  Inscriptions  Found  There"  Phil.  Trans.  19,  160-175. 

Hanson,  D.W.  and  Hamilton,  W.F.  (1974).  "Satellite  Broadcasting  of  WWV  Signals" 
IEEE  Trans,  on  Aerospace  and  Electronics  System  AES-10,  5,  562-573. 

Hellings,  R.W.  (1986).  "Relativistic  Effects  in  Astronomical  Timing  Measurements"  As- 
tron. J.  91,  650. 

Higa,  W.H.  (1972).  "Time  Synchronization  via  Lunar  Radar"  Proc.  IEEE  60,  5,  552-557. 

Hinteregger,  H.F.,  Shapiro,  I.I.,  Robertson,  D.S.,  Knight,  C.A.,  Ergas,  R.A.,  Whitney, 
A.R.,  Rogers,  A.E.E.,  Moran,  J.M.,  Clark,  T.A.,  and  Burke,  B.F.  (1972).  "Precision 
Geodesy  via  Radio  Interferometry"  Science  178,  396-398. 

Hudson,  G.E.  (1964).  "Spacetime  Coordinate  Systems"  Actes  du  Congres  international  de 
chronometrie  (Lausanne,  Switzerland). 

Hudson,  G.E.,  Allan,  D.W.,  Barnes,  J. A.,  Hall,  R.G.,  Lavanceau,  J.D.,  and  Winkler, 
G.M.R.  (1969).  "A  Coordinate  Frequency  and  Time  System"  Proc.  23rd  Annual  Fre- 
quency Control  Symposium  USAE  Com. 


2  /  TIME 


91 


Hurd,  W.J,  (1972).  "An  Analysis  and  Demonstration  of  Clock  Synchronization  by  VLBI" 

Proceedings  of  the  Fourth  Annual  NASA  and  Department  of  Defense  Precise  Time 

and  Time  Interval  (PTTI)  Planning  Meeting,  pp.  100-122. 
IAU  Fifteenth  General  Assembly  (1973).  "Report  of  Commission  31  Proceedings  1974 

Trans.  IAUXVB,  149. 
IAU  Sixteenth  General  Assembly  (1976),  Proceedings  1977  Trans  L4C/XVIB,  58. 
Ives,  H.E.  and  Stillwell,  G.R.  (1938).  "An  Experimental  Study  of  the  Rate  of  a  Moving 

Atomic  Clock"  Opt.  Soc.  Am.  28,  215. 
Jenkins,  G.M.  and  Watts,  D.G.  (1968).  Spectral  Analysis  and  its  Applications  (Holden-Day, 

San  Francisco). 

Jespersen,  J.L.,  Kamas,  G.,  Gatterer,  L.E.,  and  McDoran,  P.F,  (1968).  "Satellite  VHF 
Transponder  Time  Synchronization"  Proc.  IEEE,  56,  7,  1202-1206. 

Johnston,  K.J.  et  al  (1983).  "Precise  Time  Transfer  Using  MK  III  VLBI  Technology"  Proc. 
of  Fifteenth  Annual  Precise  Time  and  Time  Interval  (PTTI)  Meeting,  Washington, 
443-455. 

Johnston,  K.J.  (1974).  "Radio  Astrometry"  Proceedings  of  Sixth  Annual  Precise  Time  and 
Time  Interval  (PTTI)  Conference,  Washington,  p.  373. 

King-Hele,  D.G.  (1980).  "The  Gravity  Field  of  the  Earth"  Phil.  Trans.,  A  294,  317-328. 

Klemperer,  W,K.  (1972).  "Long-baseline  Radio  Interferometry  with  Independent  Fre- 
quency Standards"  Proc.  IEEE  SO,  602-609. 

Klepczynski,  W.J.  (1984).  "Time  Transfer  Techniques:  Historical  Overview,  Current  Prac- 
tices and  Future  Capabilities"  Proceedings  of  the  Sixteenth  Annual  Precise  Time  and 
Time  Interval  (PTTI)  Meeting,  Washington,  pp.  385-402. 

Kleppner,  D.  et  al.  (1965).  "Hydrogen  Maser  Principles  and  Techniques"  Phys.  Rev.  138, 
4A,  A972-A983. 

Landes,  D.  (1983).  Revolution  in  Time  (Harvard  University  Press,  Cambridge,  MA). 

Loeb,  H.W.  (1972).  "Efficient  Data  Transformation  in  the  Time  Domain  Spectrometry" 
IEEE  Trans.  Instr.  Meas.  21(2),  166-168. 

Markowitz,  W.  (1977).  "Timekeeping  and  Its  Applications"  Advances  in  Electronic  and 
Electron  Physics  44,  33-87. 

Markowitz,  W.,  Lidback,  C.A.,  Uyeda,  H.,  and  Muramatsu,  K.  (1966).  "Clock  Synchro- 
nization via  Relay  II  Satellite"  IEEE  Trans.  Inst  and  Meas.  IM-15,  4,  177-189. 

Markowitz,  W.,  Hall,  R.G.,  Essen,  L.,  and  Perry,  J.V.L.  (1958).  "Frequency  of  Cesium  in 
Terms  of  Ephemeris  Time"  Phys.  Rev.  Lett.  1,  105, 

Martin,  W.  (1966).  "Digital  Communication  and  Tracking:  Time  Synchronization  Exper- 
iment" JPL- Space  Programs  Summary  III,  61,  37-42. 

Meeks,  M.L.,  ed.  (1976).  "Astrophysics,  Part  C:  Radio  Observations"  Methods  of  Experi- 
mental Physics  12  (Academic  Press,  New  York). 

Misner,  C,  Thorne,  K.,  and  Wheeler,  J.  (1973).  "Gravitation"  (Freeman,  San  Francisco). 

Moritz,  H.  and  Mueller,  I.I.  (1987).  Earth  Rotation  (Frederick  Ungar,  New  York). 

Moyer,  T.D.  (1981).  "Transformation  from  Proper  Time  on  Earth  to  Coordinate  Time  in 
Solar  System  Barycentric  Space-Time  Frame  of  Reference"  Celestial  Mechanics  23,  1, 
33-56  and  57-68. 

Mueller,  I.I.  (1969).  SpheHcal  and  Practical  Astronomy  (Frederick  Ungar,  New  York). 

Murray,  J.A.,  Pritt,  D.L.,  Blocker,  L.W.,  Leavitt,  W.E.,  Hooten,  P.M.,  and  Goring,  W.D. 
(1971).  "Time  Transfer  by  Defense  Communications  Satellite"  Proc.  of  25th  Annual 
Frequency  Control  Symposium,  Atlantic  City,  New  Jersey,  pp.  186-193. 

Nautical  Almanac  Office  (1954).  Improved  Lunar  Ephemeris  1952-1959  (U.S.  Government 
Printing  Office,  Washington,  DC). 


92 


EXPLANATORY  SUPPLEMENT 


Newhall,  XX,  Williams,  J.G.,  and  Dickey,  J.O,  (1988).  "Earth  Rotation  from  Lunar  Laser 

Ranging"  BIH  Annual  Report  for  1987,  D  47. 
Oaks,  O.J,  (1985).  "Time  Transfer  by  Satellite"  Proc.  of  Seventeenth  Annual  Precise  Time 

and  Time  Interval  (PTT1)  Applications  and  Planning  Meeting,  pp.  77-90. 
Neugebauer,  O.  (1975).  A  History  of  Ancient  Mathematical  Astronomy  ( Springer- Verlag, 

New  York). 

Newcomb,  S.  (1878).  "Researches  on  the  Motion  of  the  Moon"  Washington  Observations 
for  1875. 

Newcomb,  S.  (1895).  "Tables  of  the  Motion  of  the  Earth  on  its  Axis  and  Around  the  Sun" 
Astronomical  Papers  of  the  American  Ephemeris  and  Nautical  Almanac  IV,  I. 

Newcomb,  S.  (1912).  "Researches  on  the  Motion  of  the  Moon,  Part  II"  Astronomical 
Papers  of  the  American  Ephemeris  and  Nautical  Almanac  IX,  I. 

Percival,  D.B.  (1973).  Statistical  properties  of  high  performance  cesium  standards"  Proc. 
on  the  Fifth  Annual  Precise  Time  and  Time  Interval  (PTTI)  Conf.,  pp.  239-263. 

Peters,  H.E.  and  Washburn,  P.J.  (1984).  "Atomic  Hydrogen  Maser  Active  Oscillator  Cav- 
ity and  Bulb  Design  Optimization"  Proc.  of  16th  Annual  Precise  Time  and  Time 
Interval  (PTTI)  Meeting,  Washington,  pp.  313-338. 

Potts,  C.B.  and  Wieder,  B.  (1972).  "Precise  Time  and  Frequency  Dissemination  via  the 
LORAN-C  System"  Proc.  IEEE  60,  530-539. 

Pound,  R.  and  Rebka,  G.  (1960).  "Apparent  Weight  of  Photons"  Phys.  Rev.  Lett.  4,  337. 

Pound,  R.  and  Snider,  J.  (1964).  "Effect  of  Gravity  on  Nuclear  Resonances"  Phys.  Rev. 
Lett.  13,  539. 

Comite  International  des  Poids  et  Mesures  (1957).  Proces  Verbaux  des  Seances,  deuxieme 
serie  25,  75-79. 

Ramsey,  N.F.  (1968).  "The  Atomic  Hydrogen  Maser"  Am.  Sci.  56(4),  420-438. 

Ramsey,  N.F.  (1972).  "History  of  Atomic  and  Molecular  Standards  of  Frequency  and 

Time"  IEEE  Trans.  Instram.  and  Meas.  21(2),  90-99. 
Rapp,  R.H.  (1974).  "Current  Estimates  of  Mean  Earth  Ellipsoid  Parameters"  Geophys. 

Res.  Lett.  1(1),  35-48. 

Recommendations  and  Reports  of  the  CCIR  1978.  "Standard  Frequencies  and  Time  Sig- 
nals" VII,  Report  363-4,  78-86. 

Reder,  F.H.  and  Winkler,  G.M.R.  (1960).  "Preliminary  Flight  Tests  of  an  Atomic  Clock 
in  Preparation  of  Long-Range  Clock  Synchronization  Experiments"  Nature  186,  4725, 
592-593. 

Reder,  F.H.,  and  Winkler,  G.M.R.  (1960).  "World  Wide  Clock  Synchronization"  IRE 

Trans.  Mil.  Electron.  4(2/3),  366-376. 
Reinhardt,  V.S.  (1974),  "Relativistic  Effects  of  the  Rotation  of  the  Earth  on  Remote  Clock 

Synchronization"  Sixth  Annual  Precise  Time  and  Time  Interval  (PTTI)  Planning 

Meeting,  Washington,  pp.  395-424. 
Reinhardt,  V.S.  and  Lavanceau,  J.  (1974).  "A  Comparison  of  the  Cesium  and  Hydrogen 

Hyperfine  Frequencies  by  Means  of  Loran-C  and  Portable  Clocks"  Proceedings  of  the. 

Twenty- Eighth  Annual  Symposium  on  Frequency  Control,  Ft.  Monmouth,  New  Jersey, 

379. 

Reinhardt,  V.S.,  Premo,  D.A.,  Fitzmaurice,  M.W.,  Wardrip,  S.C.,  and  Arvenka,  P.O. 
(1978).  "Nanosecond  Time  Transfer  via  Shuttle  Laser  Ranging  Experiment"  Proceed- 
ings of  the  Ninth  Annual  Precise  Time  and  Time  Interval  (PTTI)  Applications  and 
Planning  Meeting,  pp.  319-342. 


2  /  TIME 


93 


Ringer,  D.E.,  and  Gandy,  J.,  and  Jechart,  E.  (1975).  "Spaceborne  Rubidium  Frequency 
Standard  for  Navstar  GPS"  Proceedings  of  the  Seventh  Annual  Precise  Time  and 
Time  Interval  (PTTI)  Conference,  pp.  671-696. 

Rogers,  A.E.E.  (1970).  "Very  Long  Baseline  Interferometry  with  Large  Effective  Band- 
width for  Phase  Delay  Measurements"  Radio  Sci,  5,  1239-1248. 

Rueger,  L.J.  and  Bates  A.  (1978).  "Nova  Satellite  Experiment"  Radio  Sci.  14,  707-714. 

Rutman,  J.  (1978).  "Application  of  Space  Techniques  to  Time  and  Frequency  Dissemintion 
and  Synchronization"  Proc.  European  Workshop  on  Space  Oceanography,  Navigation, 
and  Geodynarnics  (SONG),  Schloss-Elmau,  Germany  ESAPS-137.  Paris:  European 
Space  Agency  SP-127,  pp.  311-316. 

Saburi,  Y.  (1976).  "Observed  Time  Discontinuity  of  Clock  Synchronization  in  Rotating 
Frame  of  the  Earth"  J.  Radio  Res.  Labs.  23,  112,  255-265. 

Saburi,  Y.,  Yamamoto,  M,,  and  Harada,  K.  (1976).  "High-precision  Time  Comparison 
via  Satellite  and  Observed  Discrepancy  of  Synchronization"  IEEE  Thins.  Instr.  and 
Meas.  IM-25,  4,  473. 

Silverberg,  E.C.  (1974).  "Operation  and  performance  of  a  Lunar  Laser  Ranging  Station" 
Appl.  Opt  13,  565-574. 

Spencer  Jones,  H.  (1939).  "The  Rotation  of  the  Earth  and  the  Secular  Accelerations  of 
the  Sun,  Moon  and  Planets"  Month.  Not.  R.  AS  99,  541. 

Steele,  J.  McA.,  Markowitz,  W.,  and  Lidback,  C.A.  (1964).  "Telstar  Time  Synchroniza- 
tion" IEEE  Trans.  Instr.  and  Meas.  IM-13,  4,  164-170. 

Stoyko,  N.  (1937).  "Sur  la  periodicite  dans  l'irregularite  de  la  rotation  de  la  Terre" 
Compt.es- rendus  250,  79. 

Stoyko,  M.N. (1937).  "Sur  la  periodicite  dans  l'irregularite  de  la  rotation  de  la  terra"  C.R. 
Acad.  Sci  205,  79. 

Taylor,  R.J.  (May  1974).  "Satellite  to  Ground  Timing  Experiments"  Proc.  28th  Ann.  Sym. 

on  Frequency  Control,  pp.  384-388. 
Trans.  IAU  (1960).  10,  72,  Moscow,  1958  (English  translation,  p.  500). 
Turner,  A.J,  (1984).  "Time  Measuring  Instruments:  Water-clocks,  Sand-glasses,  Fire- 
clocks"  Catalogue  of  the  Collection,  I,  Part  3  (The  Time  Museum,  Rockford). 
Vanier,  J.  and  Audoin,  C.  (1989).  "The  Quantum  Physics  of  Atomic  Frequency  Standards" 

(Adams  and  Hilger,  Bristol). 
Veillet,  C.  and  Pham  Van,  J.  (1988).  "Earth  Rotation  from  Lunar  Laser  Ranging"  BIH 

Annual  Report  for  1987  D-45. 
Vessot,  R.F.C.  (1974).  "Lectures  on  Frequency  Stability  of  Clocks  in  the  Gravitational 

Redshift  Experiment"  Experimental  Gravitation  B.  Bertotti,  ed.  (School  of  Physics 

Enrico  Fermi,  Academic  Press,  New  York),  pp.  111-162. 
Vessot,  R.F.C.  and  Levine,  M.W.  (1979).  "A  Test  of  the  Equivalence  Principle  Using  a 

Space-Borne  Clock"  General  Relativity  and  Gravitation  10,  3,  181-204. 
Whitrow,  G.J.  (1988).  Time  in  History  (Oxford  University  Press,  Oxford). 
Winkler,  G.M.R.  (1977).  "Timekeeping  and  Its  Applications"  Advances  in  Electronics  and 

Electron  Physics  44,  33-97. 
Winkler,  G.M.R.  (1987).  "High  Performance  Clocks"  First  European  Time  and  Frequency 

Forum,  18-20  March  1987,  Besancon,  France,  pp.  7-19. 
Winkler,  G.M.R.  and  Van  Flandern,  T.C.  (1977).  "Ephemeris  Time,  Relativity  and  the 

Problem  of  Uniform  Time  in  Astronomy"  Astron.  J.  82,  1,  84-92. 
Woolard,  E.W.  and  Clemence,  G.M.  (1966).  Spherical  Astronomy  (Academic  Press,  New 

York  and  London), 


CHAPTER 


Celestial  Reference  Systems 

by  C.Y.  Hohenkerk,  B.D.  Yallop,  C.A.  Smith,  and  AT.  Sinclair 


3.1    CELESTIAL  REFERENCE  SYSTEMS 

In  order  to  specify  positions  of  astronomical  objects,  such  as  stars,  galaxies,  quasars, 
planets,  and  satellites,  it  is  necessary  to  have  a  reference  system.  The  currently  avail- 
able reference  system  is  based  on  the  FK5  star  catalog,  which  provides  a  reference 
frame,  the  IAU  1976  System  of  Astronomical  Constants,  the  IAU  1980  theory  of 
nutation,  and  the  procedures  that  provide  the  methods  for  implementing  the  ref- 
erence system.  Chapter  4  describes  in  detail  the  distinction  between  a  reference 
system  and  a  reference  frame. 

An  ideal  celestial  system  would  be  an  inertial  system  so  that  the  equations 
of  motion  could  be  written  without  any  rotational  terms.  Unfortunately,  the  re- 
alization of  an  ideal  celestial  reference  system  can  only  be  approached,  it  cannot 
be  achieved.  As  this  chapter  was  being  prepared,  the  IAU  appointed  a  working 
group  to  study  the  many  different  aspects  of  reference  systems  and  to  formulate 
improvements  for  the  future.  Therefore,  although  this  chapter  attempts  to  provide 
the  instructions  and  the  methods  for  the  current  reference  system,  it  also  indicates 
some  of  the  difficulties  with  the  present  system  and  possible  future  changes. 

The  ideal  reference  system  would  provide  an  inertial  frame  that  could  be  used  at 
all  frequencies  of  the  electro-optical  spectrum,  and  at  all  magnitudes  or  intensities. 
Unfortunately  a  number  of  problems  interfere  with  realizing  such  a  reference  system. 
The  first  problem  is  that  no  known  point  sources  radiate  at  all  frequencies  of  the 
spectrum  such  that  the  positions  determined  at  one  frequency  can  be  accurately 
related  to  those  determined  at  another  frequency.  Thus  we  have  different  sets  of 
reference  somc.es  in  the  optical,  radio,  and  X-ray  frequencies. 

We  have  the  problem  that  the  dynamical  range  for  all  observing  systems  is 
limited.  Generally  in  the  optical  range  only  five  magnitudes  of  intensity  can  be 
observed  astrometrically  by  one  technique.  Thus  the  method  and  the  references 

95 


96  EXPLANATORY  SUPPLEMENT 

used  for  observing  bright  stars  are  different  from  those  for  observing  faint  stars.  We 
can  define  a  reference  frame  based  on  the  very  distant  extragalactic  sources  that 
should  be  without  proper  motion  and  provide  a  pseudofixed  reference  frame,  but 
it  is  impossible  to  measure  the  positions  of  brighter  stars  or  solar  system  objects 
directly  relative  to  those  faint  distant  sources.  Thus  we  have  a  problem  realizing  an 
observable  reference  frame  at  all  frequencies  and  magnitudes. 

There  is  also  a  problem  defining  the  ideal  reference  frame.  In  classical  mechanics 
an  inertial  reference  frame  is  either  at  rest  or  in  a  state  of  uniform  rectilinear 
motion  with  respect  to  absolute  space.  However,  the  theories  of  general  and  special 
relativity  required  some  changes  to  this  concept  .  In  the  general  theory  of  relativity, 
Einstein  defined  an  inertial  frame  as  a  freely  falling  coordinate  system  in  accordance 
with  the  local  gravitational  field  which  is  due  to  all  material  matter  of  the  universe 
(Einstein,  1956).  The  special  theory  of  relativity  defines  an  inertial  frame  in  a 
space-time  continuum  in  the  absence  of  gravitational  fields,  rather  than  in  absolute 
space  (Moritz,  1967),  and  the  transformation  between  inertial  frames  is  given  by 
the  Lorentz  transformation. 

There  are  finite  regions  with  respect  to  a  chosen  space  of  reference  where  ma- 
terial particles  move  freely  without  acceleration  and  in  which  the  laws  of  special 
relativity  hold  with  remarkable  accuracy,  which  can  be  regarded  as  quasi-inertial 
frames.  Thus  the  center  of  mass  of  the  Earth-Moon  system  falling  in  an  elliptic 
orbit  around  the  Sun  in  a  relatively  weak  gravitational  field  is  an  example  of  such 
a  finite  region.  Therefore,  we  may  assume  quasi-inertial  frames  of  reference,  and 
any  violation  of  the  principles  when  using  classical  mechanics  can  be  taken  into 
account  with  small  corrections  applied  to  the  observations  and  by  an  appropri- 
ate coordinate-time  reference.  The  effects  of  special  relativity  for  a  system  moving 
with  the  Earth  around  the  Sun  are  of  the  order  10~8;  likewise  those  with  general 
relativity  are  of  the  order  10-8. 

It  is  necessary  to  distinguish  between  various  types  of  quasi-inertial  frames. 
For  example,  the  galactic  reference  frame,  which  is  based  on  assumptions  about  the 
proper  motions  of  celestial  bodies  and  their  statistical  properties,  is  a  frame  defined 
kinetically.  A  reference  frame  can  be  constructed  on  extragalactic  sources  based  on 
the  assumption  that  the  galaxies  have  no  rotational  components  to  their  motions. 
Alternatively,  we  can  construct  a  quasi-inertial  frame  based  on  a  dynamical  system. 
This  reference  frame  is  based  on  the  theory  of  motions  of  the  bodies  of  the  solar 
system,  and  is  constructed  in  such  a  way  that  there  remains  no  rotational  term  in 
the  equations  of  motion. 

In  Newtonian  mechanics,  the  various  types  should  be  equivalent,  but  this  is  not 
true  in  general  relativity.  In  general  relativity  a  dynamical  system  of  coordinates 
is  a  local  reference  frame  that  is  locally  tangent  to  the  general  space-time  mani- 
fold. In  contrast  the  kinetic  frame  is  defined  by  assumptions  about  the  apparent 
motions  of  remote  objects  and  is  therefore  a  coordinate  system  that  is  subject  to 
relativistic  effects  such  as  geodesic  precession.  Even  if  this  is  suitably  corrected,  a 


3  /  CELESTIAL  REFERENCE  SYSTEMS  97 

basic  difference  between  the  concepts  remains,  which  is  another  reason  for  using 
the  terminology  quasi-inertial. 

Although  we  may  desire  a  single  ideal  reference  system,  in  practice  we  have  to 
recognize  not  only  the  conceptual  differences  in  reference  frames  used  in  the  avail- 
able systems  but  also  the  differences  in  the  realizations  of  these  frames.  Although 
the  FK5  can  be  viewed  as  a  kinetic  frame  based  on  the  stars,  its  origin  is  tied  to 
an  equinox  that  is  defined  by  the  solar  system.  But,  in  practice,  the  FK5  does  not 
have  a  simple  fiducial  point.  Its  real  origin  is  a  meridian  of  zero  right  ascension. 
The  meridian  does  not  exactly  go  through  the  equinox  defined  by  a  given  solar  sys- 
tem ephemeris,  nor  is  that  meridian  necessarily  a  plane.  It  can  differ  systematically 
in  a  declination-dependent  way.  Therefore,  the  origin  of  the  FK5  reference  frame 
is  defined  as  a  catalog  equinox.  This  is  contrasted  with  the  equinox  defined  by  a 
solar-system  ephemeris  and  called  a  dynamical  equinox.  Each  solar-system  ephem- 
eris defines  its  own  origin  or  equinox.  In  the  case  of  the  ephemerides  DE200/LE200, 
an  effort  was  made  to  make  the  origin  agree  with  the  FK5  equinox,  but  it  was  rec- 
ognized, and  needs  to  be  recognized,  that  there  is  some  difference,  which  will  be 
determined  more  accurately  with  time. 

Therefore,  although  we  may  have  a  conceptual  ideal  reference  system,  each 
realization  of  a  reference  frame  will  be  somewhat  different,  and  there  will  be  a  need 
to  determine  the  transformations  from  one  reference  frame  to  another.  The  FK5 
reference  frame  is  very  close  to  the  DE200/LE200  reference  frame,  which  in  turn 
is  very  close  to  the  radio-source  reference  frames.  The  deviations  are  partly  due 
to  the  different  accuracies  with  which  the  various  reference  frames  are  determined. 
Similarly  there  can  be  time-dependent  differences  between  the  reference  frames. 
The  FK4  reference  frame  was  found  to  have  a  motion  as  a  function  of  time.  This 
could  be  viewed  as  a  systematic  error  in  the  proper  motions  of  the  FK4  system. 
Although  it  is  hoped  that  these  differences  will  be  small,  it  must  be  recognized 
when  doing  precise  positional  astronomy  that  these  differences  do  exist. 

For  precise  reduction  of  observations  it  is  necessary  to  include  all  the  displace- 
ments and  motions  involved  in  the  reference  systems.  These  include  the  differences 
in  the  origin  of  the  frame,  barycentric,  geocentric,  or  topocentric,  together  with  the 
appropriate  time  coordinate  as  discussed  in  Chapter  2.  Also  the  time-dependent 
variations  in  the  celestial  coordinates  must  be  included;  these  are  precession,  nuta- 
tion, parallax,  aberration,  and  light  deflection.  The  reduction  to  topocentric  coor- 
dinates includes  the  Earth-orientation  parameters  (UT1-UTC  and  polar  motion), 
diurnal  parallax,  diurnal  aberration,  and  refraction.  The  basis  for  the  expressions 
necessary  for  these  conversions  is  the  subject  of  the  rest  of  this  chapter. 

3.1 1    Fundamental  Reference  Systems 

Stellar  reference  frames  can  be  determined  observationally.  Because  of  the  many 
motions  involved,  it  must  be  recognized  that  the  observational  determination  of  the 


98  EXPLANATORY  SUPPLEMENT 

reference  frame  depends  upon  the  dates  of  the  observations.  From  the  rotation  of  the 
Earth,  the  plane  of  the  equator  and  hence  its  pole  can  be  determined.  A  fiducial 
direction  in  the  equatorial  plane  must  be  determined  either  from  the  definition 
of  a  given  object,  collectively  from  a  number  of  different  objects,  or  from  solar- 
system  observations  defining  the  ecliptic.  The  observational  determination  of  the 
fundamental  reference  frame  can  then  be  converted  to  a  conventional  standard 
reference  frame  by  application  of  certain  specified  procedures.  These  procedures,  in 
combination  with  the  reference  frame,  constitute  the  reference  system  and  will  be 
specified  in  this  chapter. 


3.12   The  Dynamical  Reference  System 

The  motions  in  the  solar  system  provide  a  number  of  possible  bases  for  reference 
frames,  the  standard  being  the  equator  of  the  Earth  and  the  equinox  defined  by  the 
intersection  of  the  mean  planes  of  the  equator  and  the  ecliptic.  Alternatively,  the 
ecliptic  and  the  equinox  can  define  a  reference  frame.  Some  would  argue  that  the  use 
of  the  invariable  plane  with  an  equinox  provides  a  suitable  reference  frame,  but  this 
frame  is  not  well-determined.  A  reference  frame,  however  defined,  can  be  determined 
from  the  process  of  calculating  the  ephemerides  of  the  solar-system  bodies  based 
on  their  equations  of  motion  in  the  chosen  frame,  fitting  these  computed  positions, 
suitably  reduced  to  the  frame  of  observation,  to  observed  positions,  and  hence 
determining  computed  ephemerides  that  are  consistent  with  the  observational  data. 
Such  a  fitting  process,  with  sufficiently  accurate  observation  data,  can  also  provide 
the  basis  for  determining  the  constants  for  the  procedures  necessary  for  reducing 
the  observational  data.  Some  observing  techniques  for  solar-system  objects,  such  as 
range  measurements  and  spacecraft  observations,  are  independent  of  any  external 
frame,  such  as  the  stellar  frame,  but  these  observations  have  a  strong  dependence 
on  the  observing  sites,  i.e.,  the  terrestrial  coordinate  system,  the  Earth-orientation 
parameters,  and  an  accurate  basis  for  time.  Other  observations  are  made  with 
reference  to  stellar  coordinate  frames,  for  which  the  dynamical  reference  frame 
must  be  determined  with  reference  to  the  stellar  reference  frame  for  the  consistent 
use  of  these  observations. 


3.13   The  Conventional  Celestial  Reference  System 

Conventional  reference  systems  can  be  defined  to  provide  a  consistent  basis  for 
comparison.  Such  conventional  reference  systems  must  include  specification  of  the 
reference  frame  at  a  given  date,  and  all  the  necessary  procedures  and  constants 
required  to  transform  this  conventional  frame  from  one  date  to  any  other  date. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 

3.2    BASIS  OF  REDUCTION  OF  CELESTIAL  COORDINATES 


99 


A  necessary  part  of  any  reference  system  is  the  procedures  required  to  relate  a 
reference  frame  for  one  time  to  one  for  another  time.  These  procedures  involve 
precession,  nutation,  space  motion,  parallax,  aberration,  and  light  deflection.  In 
this  section,  these  different  effects  will  be  discussed  from  a  theoretical  basis  along 
with  an  explanation  of  the  determination  of  these  effects.  To  complete  the  discus- 
sion, formulas  for  polar  motion  and  refraction,  which  are  required  in  topocentric 
reductions,  are  given  at  the  end  of  this  section. 


3.21  Precession 

Since  the  plane  of  the  ecliptic  and  the  plane  of  the  equator  are  used  as  planes  of 
reference,  and  their  intersection,  the  equinox,  is  used  as  the  fiducial  point,  it  is 
necessary  to  include  the  fact  that  these  planes  are  in  motion.  The  motion  of  the 
ecliptic  is  due  to  the  gravitational  action  of  the  planets  on  the  Earth's  orbit  and 
makes  a  contribution  to  precession  known  as  planetary  precession.  If  the  equator 
were  fixed,  this  motion  would  produce  a  precession  of  the  equinox  of  about  12"  per 
century  and  a  decrease  in  the  obliquity  of  the  ecliptic  of  about  47"  per  century. 
The  motion  of  the  equator  is  due  to  the  torque  of  the  Sun,  Moon,  and  planets  on 
the  dynamical  figure  of  the  Earth.  It  can  be  separated  into  two  parts,  the  lunisolar 
precession,  which  is  the  smooth,  long-period  motion  of  the  mean  pole  of  the  equator 
about  the  pole  of  the  ecliptic,  with  a  period  of  about  26,000  years,  and  nutation, 
which  is  the  short-period  motion  of  the  true  pole  around  the  mean  pole  with  an 
amplitude  of  about  9"  and  a  variety  of  periods  of  up  to  18.6  years.  The  combination 
of  lunisolar  and  planetary  precession  is  called  general  precession. 

The  notation  used  here  follows  Lieske  et  al.  (1977),  who  give  a  useful  table  that 
contains  cross-references  to  the  notation  used  by  other  authors. 

A  basic  way  of  describing  the  motion  of  the  ecliptic  is  to  use  angles  irA  and 
IIA,  where  irA  is  the  angle  between  the  mean  ecliptic  at  a  fixed  epoch  ef  =  to  and 
the  mean  ecliptic  of  date  eD  =  /,  and  TIA  is  the  angular  distance  from  the  equinox 
T0  at  the  fixed  epoch  to  the  ascending  node  where  the  ecliptic  of  date  meets  the 
fixed  ecliptic  of  epoch  (Figure  3.21.1).  Expressions  for  nA  and  UA  are  obtained 
from  Newcomb's  theory  of  the  Earth's  orbital  motion  about  the  Sun,  but  with 
modifications  to  allow  for  improved  determinations  of  the  planetary  masses.  The 
form  of  the  expressions  from  the  theory  are 

sin  tta  sin  TIA  =  st  +  s\  t2  +  Sz  r3, 


sin  nA  cos  II A  —  ct  +  Ci  r  +  c^t1 ', 


(3.21-1) 


100 


EXPLANATORY  SUPPLEMENT 


Figure  3.21.1 

The  ecliptic  and  equator  at  epoch  and  date 

where  for  continuity  tta  >  0  for  r  >  0  and  tta  <  0  for  t  <  0.  Numerical  values  for  the 
coefficients  s,  si,  S2,  c,  c\,  and  q  are  given  in  Table  3.211.1  (page  104),  expressed 
conventionally  in  arc  seconds. 

The  precessional  effect  due  to  the  motion  of  the  ecliptic  is  described  by  the  arc 
PT  in  Figure  3.21.1,  and  is  referred  to  as  the  accumulated  planetary  precession. 
Xa-  Its  rate  of  change  at  epoch  to  is 

X  =  sec-sec  er,!  (3.21-2) 

where  e0  is  the  obliquity  of  the  ecliptic  at  the  epoch  to- 

The  basic  parameter  for  describing  lunisolar  precession  is  Newcomb's  preces- 
sional constant,  which  has  the  value  Po  at  epoch  to-  It  is  not  quite  constant  but  has 
a  very  slow  rate  of  change  P\  of  approximately  -0'.'00369  per  Julian  century.  The 
constant  occurs  in  the  dynamical  equations  of  motion  for  the  equator  because  of  the 
torque  produced  by  the  Sun  and  Moon;  so  far  it  has  been  impossible  to  calculate 
a  sufficiently  accurate  value  of  P0  from  its  theoretical  dependency  on  geophysical 
parameters,  and  so  the  value  used  comes  from  the  observed  rate  of  precession. 
Lunisolar  precession  at  epoch  f0, 

i>  =  Po  cos  e0  -  Ps,  (3.21-3) 

is  the  rate  of  change  in  longitude  $4  along  the  ecliptic  due  to  the  motion  of  the 
equator  at  epoch  to,  where  Pg  is  called  the  geodesic  precession,  which  is  a  relativistic 
nonperiodic  Coriolis  effect  amounting  to  1  '.'92  per  Julian  century  (Lieske  et  ai, 
1977). 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  01 

The  combined  effects  of  planetary  precession  and  lunisolar  precession  is  called 
general  precession  in  longitude.  Lieske  et  al.  (1977)  have  adopted  the  definition 
of  the  accumulated  general  precession  Pa  as  denned  by  Newcomb,  shown  in  Fig- 
ure 3.21.1,  of 

Pa  =  TR  -  T0R.  (3.21-4) 

Newcomb  actually  adopted  an  expression  for  pA  that  computed  the  angle  T0Q,  in 
Figure  3.21.1,  where  Q  is  the  projection  of  the  equinox  of  date  on  the  ecliptic  at 
the  fixed  epoch  t0.  The  difference  is  small,  being  0'.'0005  /  cy2;  however,  at  epoch  tQ 
both  procedures  give  the  same  rate 


P  =  tp  ~  X  cos  e0  =  P0  cos  e0  -  PK-s  cot  en,  (3.2 1-5) 

and  p  may  be  resolved  into  general  precession  in  right  ascension,  m,  and  general 
precession  in  declination,  n,  where 

m  -  ip  cos  en  -  x  =  (Po  cos  e0  -  Pg)  cos  e0  -  s  cosec  e0, 
n  =  ip  sin  eo  =  (A)  cos  en  _  Pg)  sin  en; 
hence    p  =  m  cos  eo  +  n  sin  e0.  (3.21-6) 

The  constants  of  precession  in  the  past  have  been  derived  from  the  analysis 
of  the  proper  motions  of  stars.  In  the  solar  neighborhood  the  stars  are  themselves 
revolving  about  the  center  of  the  galaxy.  The  method  was  thoroughly  reviewed 
by  Fricke  (1977),  who  concluded  that  Newcomb's  lunisolar  precession  should  be 
corrected  by  +1'.'10  per  Julian  century  with  an  uncertainty  of  ±  0"15  per  Julian 
century. 

There  are  several  ways  of  formulating  precession.  For  example,  the  vector  di- 
rections of  the  polar  axis  of  the  Earth  and  the  polar  axis  of  the  ecliptic  may  be 
expressed  in  terms  of  polynomials  involving  time  arguments  (Fabri,  1980;  Mur- 
ray, 1983),  which  are  then  used  to  calculate  the  effects  of  precession.  The  method 
discussed  below  has  been  adopted  by  the  IAU  (Lieske  et  ai,  1977)  for  rigorous 
calculations.  It  has  developed  from  the  time  of  Newcomb,  and  is  well-suited  for 
the  practical  application  of  corrections  for  precession  to  coordinates  and  orbital 
elements. 

The  accumulated  precession  angles  £4,  zA,  and  0A,  which  are  used  to  calculate 
the  effect  of  precession  on  equatorial  coordinates,  are  referred  to  a  base  epoch 
and  have  time  arguments  that  describe  precession  from  an  arbitrary  fixed  epoch 
sf  to  an  epoch  of  date  ep.  The  angles  are  shown  on  the  surface  of  a  sphere  in 
Figure  3.21.2,  and  polynomial  expressions  for  them  are  given  in  Section  3.211. 


102 


EXPLANATORY  SUPPLEMENT 


Figure  3.21.2 

The  precession  angles      za,  and  9a 


In  the  figure  the  pole  of  the  equator  at  Bf  is  point  Pq  and  the  pole  of  the 
ecliptic  is  point  Nq.  At  the  epoch  eq,  Pq  has  moved  to  P  and  Nq  to  N.  Imagine  a 
right-handed  set  of  three-dimensional  Cartesian  coordinate  axes  with  origin  at  the 
center  of  the  sphere,  x-axis  pointing  to  To,  where  the  equator  and  ecliptic  meet  (the 
equinox)  at  the  fixed  epoch  ep .  The  y-axis  is  90°  away  in  an  easterly  direction  along 
the  equator,  and  the  z-axis  points  toward  the  pole  Pq.  Initially  precession  will  move 
Pq  toward  To,  but  the  movement  of  Nq  as  well  will  cause  Pq  to  move  in  a  slightly 
different  direction. 

A  rotation  of  —(A  about  the  z-axis  makes  PqTq  pass  through  P.  This  great  circle 
meets  the  mean  equator  of  epoch  at  right  angles  at  point  Q  and  the  mean  equator 
of  date  at  right  angles  at  R.  The  jc-axis  is  now  in  the  direction  Q;  the  y-axis  points 
toward  the  node  S,  where  the  two  equators  cross. 

A  rotation  +8 a  equal  to  the  angular  separation  of  P  from  Pq  about  the  new 
y-axis  brings  the  mean  equator  of  epoch  to  the  mean  equator  of  date.  The  z-axis 
points  to  the  pole  of  date  P,  the  y-axis  to  the  node  5,  and  the  *-axis  now  points 
toward  R  in  the  plane  of  the  equator  of  date. 

Finally,  a  rotation  of  —  zA  equal  to  the  angle  TPR  about  the  z-axis  brings  R  to 
T,  so  that  the  jc-axis  points  toward  T,  the  equinox  of  date,  and  still  lies  in  the  plane 
of  the  mean  equator  of  date. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


103 


The  precession  matrix  P,  made  up  of  these  rotations  (see  Section  11.4),  precesses 
equatorial  rectangular  coordinates  from  an  arbitrary  fixed  equinox  and  equator  of 
epoch  £f  to  one  of  date  eo  and  is  given  by 


P[eF ,  ed]  =  Rs(-^)  Rz<+^)  R3(-C0. 


(3.21-7) 


Rewriting  Equation  3.21-7  in  terms  of  spherical  coordinates  gives 


P  = 


cos  za  cos  6a  cos  Ca 
-  sin  za  sin  Ca 

sin  zA  cos  9A  cos  Ca 
+  cos  za  sin  Ca 

sin  6 A  cos  Ca 


—  cos  zA  cos  6a  sin  Ca    ~  cos  zA  sin  8 a 
-  smzA  cosGt 


sin  zA  cos  8 a  sin  Ca 
+  cos  za  cos  Ca 

■  sin  9 A  sin  Ca 


—  sin  za  sin  9A 

COS  #4 


(3.21-8) 


Having  calculated  the  precession  angles  for  the  matrix  P,  one  can  calculate  the 
inverse  matrix  P_l  in  various  ways;  for  example, 


P"1  =R3-1(-G)Rr1  (+^)R3_  (~za) 

=  rI(-Ca)R2(+0a)rJ(-^) 

=  R3(+G)R2(-0a)R3(+zjO 

=  P[£D,£fI 


(3.21-9) 


where  use  has  been  made  of  the  property  that  the  inverse  of  a  rotation  matrix  is 
its  transpose  (i.e.,  it  is  orthogonal). 


3.211  Precession  Angles  and  Rates  Adopted  by  IAU  (1976)  The  new  basis  for  pre- 
cession is  taken  directly  from  the  discussion  of  Lieske  et  al.  (1977)  and  modified 
by  the  small  amount  discussed  in  Lieske  (1979).  The  following  values  are  adopted 
constants  at  epoch  J2000.0 

p  =  5029'.'0966  per  Julian  century 
P\  =  —  0"00369  per  Julian  century 
Pg  =  1  '.'92  per  Julian  century 

e0  =  23°26,21'.,448  (3.211-1) 


104 


EXPLANATORY  SUPPLEMENT 


Table  3.211.1 

Accumulated  Precession  Angles 


sin  ka  sin  nA  =  (4"f  976  -  0:75250  T  +  0:'000431  T2)  t  +  (0"1 9447  +  CT000697  T)  fi  -  0'.'0001 79  fi 
sin  it A  cos  nA  =  (-46:'81 50  -  0:001 17  7  +  0:'005439  T2)t  +  (0:'05059  -  0"0037 127)12  +  0:'000344  fi 
tta  =  (47"0029  -  0"06603  T  +  0:'000598  t2)  t  +  (-Q'.'03302  +  0:000598  T)  fi  +  0!'000060  fi 
nA  =  174° 52  34!'982  +  3289:4789  7  + 0'.'60622  T2  +  (-869'.'8089  -  0:'50491  T)  f  +  0"03536  t2 
i-A  =  (5038'.'7784  +  0!'49263  T  -  O'.'OOOI  24  T2)  t  +  (-1  !'07259  -  O"001 106  T)  t2  -  0"001 147  fi 
XA  =  (10','5526  -  1 '.'88623  T  +  0:'000096  T2)  t  +  (-2:38064  -  0"000833  T)fi  -  0!'0Q1 125  fi 
pA  =  (5029:0966  +  2l'22226  T  -  0!'000042  T2)  t  +  (1  "1 1 1 13  -  0!'000042  T)  fi  -  0:'000006  fi 
(A  =  (2306:2181  +  1'.'39656  T  -  0'.000139  T2)  t  +  (0:'30188  -  0'.'000344  T)  fi  +  0!'017998  fi 
zA  =  (2306'.'21 81  +  1  :'39656  T  -  OI'OOOI 39  T2)  t  +  (1  :09468  +  0'.'000066  7)  fi  +  0!'01 8203  fi 
6A  =  (2004:3109  -  0!'85330  T  -  0'.'00021 7  T2)  t  +  {-0!42665  -  O'.'00O21 7  T)  fi  -  0^041833  fi 


The  equations  in  Table  3.211.1  give  expressions  for  the  accumulated  precession 
angles  as  functions  of  time,  where  the  base  epoch  of  the  equations  is  e0  =  J2000. 0 
or  JD(eo)  =  2451545.0,  and  the  time  arguments  are  in  units  of  a  Julian  century,  i.e., 

T  =  (JDOf )  -  JD(e0))  /  36525 

t  =  (JD(£D)  -  JD(eF))  /  36525,  (3.21 1-2) 

where  eF  is  a  fixed  epoch  and  eo  is  the  epoch  of  date. 

The  expressions  at  epoch  £f  for  the  rates  per  Julian  century  of  general  preces- 
sion, in  longitude,  (/>),  right  ascension  (m)  and  declination  («),  and  ir  the  rate  of 
rotation  of  the  ecliptic,  are 

p  =  x(P4)U  =  5029"0966  +  2'.'22226  T  -  0"000042  T2 
at 

m  =  4(C/»  +^)|f=o  =  4612"4362  +  2'.'79312 7" -  O'.'000278r2 
at 

n  =  4(&)l*=o  =  2004'.'3I09  -  0'.'85330r  -  O'.'0OO217  T2 

T  =  -t(tta)\,=o  -  47!'0029  -  0'.'06603  T+  0!'000598  T2. 
at 

3.212  Rigorous  Reduction  for  Precession  The  most  convenient  method  of  rigor- 
ously precessing  mean  equatorial  rectangular  coordinates  is  to  use  the  precession 
matrix  P  as  follows: 


r  =  Pr0 

and    r0  =  P_1r, 


(3.212-1) 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 05 

which  transforms  the  position  vector  To  referred  to  the  fixed  epoch  ejr  =  tQ,  to  the 
position  vector  r  referred  to  the  epoch  of  date  eD  =  f,  and  vice  versa.  The  matrix 
P  (see  Equation  3.21-8)  is  evaluated  using  the  precession  angles  Ct>  Zai  and  0A  (see 
Table  3.211.1)  and  the  appropriate  time  arguments. 

Equation  3.212-1  can  be  rewritten  in  terms  of  right  ascension  and  declination 
(a,  6)  as 

sin(cv  -  zA)  cos  6  =  sin(ao  +  CO  cos  6n 

cos(q  -  za)  cos  6  =  cos(a0  +  CO  cos  6A  cos  <50  -  sin  9A  sin  So  (3.212-2) 
sin  6  =  cos(q0  +  CO  sin  6A  cos  8Q  +  cos  6A  sin  <50, 

and  the  inverse  is 

sin(a0  +  CO  cos  *o  =  +  sin(a  -  za) cos  6 

cos(a0  +  C0cos<50  =  +cos(a  -  za)cos6a  cos<5  +  sin^  sin 6  (3.212-3) 
sin  60  =  -  cos(a  -  zA)  sin  6A  cos  6  +  cos  9A  sin  6. 

3.213  Approximate  Reduction  for  Precession  Approximate  formulas  for  the  re- 
duction of  coordinates  and  orbital  elements  referred  to  the  mean  equinox  and  equa- 
tor or  ecliptic  of  date  (f)  are 

For  reduction  to  J2000.0  For  reduction  from  J2000.0 


a0 

—  a 

—  M  —  N  sin  am  tan  8m 

a 

=  ao  +  M  +  N  sin  am  tan  Sm 

60 

=  6- 

-  N  cos  am 

6 

=  60+N  cos  am 

A0 

=  A 

-  a  +  bcos(\  +  c')  tan  .in 

A 

=  A0  +  a  —  b  cos(  A0  +  c)  tan  3 

/3b 

=  /3 

-  fcsin(A  +  c') 

0 

=  0o  +  i>sin(A0  +  c) 

r?0 

=  Q 

—  a  +  b  sin(Q  +  c')  cot  z'o 

Q 

=  Qq  +  a  -  b  sin(Q<)  +  c)  cot  i 

h 

=  i  - 

-  bcos(Q  +  c') 

i 

~  io+b  cos(Qu  +  c) 

—  U) 

—  b  sin(£2  +  c')  cosec  to 

=  ujQ  +  b  sin(£in  +  c)  cosec  ('. 

The  subscript  zero  refers  to  epoch  J2000.0,  and  am  and  8m  refer  to  the  mean  epoch; 
with  sufficient  accuracy 

am  =  a  -  ^(M  +  N sin  a  tan  5) 
5m  =  6  —  -N  cos  am 


106 


EXPLANATORY  SUPPLEMENT 


or    Qm  =  do  +  -(M  +  N  sin  a0  tan  6a ) 

Sm  =  60  +  ^N  cos  am  (3.213-1) 

and  the  precession  angles,  obtained  to  sufficient  accuracy,  from  expressions  in  Ta- 
ble 3.211.1  for  the  fixed  epoch  of  J2000.0,  T-  0,  are 

tta  sin  nA  *  4"  1 976 1  +  0'.'  19447  f2  -  0'.'000179  P 
tva  cos nA  =  -46?8 150?  +  0'.'05059 r2  +  0:'000344 13 

M  =  (Q  +  ZaW  =  0,  /)  =  1?28 12323 1  +  0?0003879 12  +  0?0000101  /3 

N  =  $A(T  =  0,  t)  =  0?5567530 1  -  0?000 1 1 85  r2  -  0?00001 1 6 13 

a=pA(T=Q,t)=  1  ?  396971  f +  0?0003086  r 

b  =  <rcA(T=Q,t)  =  0?0 13056/  -  0?  0000092  f2 

c=  180°  -nm  +  -a  =  5?12362  +  0?241614r  +  0f0001122r2 
c'  =  180°  -n„,  -  ^a  =  5?12362-  1  °  155358 1-  0?0001964f2  (3.213-2) 

where  17m  -  IIA(T  -  j  t,  t  -  0)  is  evaluated  at  the  mid-epoch. 

Formulas,  valid  over  short  periods,  for  the  reduction  from  the  mean  equinox 
and  equator  or  ecliptic  of  epoch  t\  (e.g.,  the  middle  of  the  year)  to  date  (t  =  t\  +t), 
where  r  is  a  fraction  of  a  year  and  |r|  <  1,  are 

a  =  «i  +  r(m  +  n  sin  at\  tan  6[)  6  =  6\  +  rncos  Q| 

A  =  A,  +  r{p  -  7tcos(A,  +6°)tan^)        P  =  P\  +T7rsin(A,  +6°) 

(3.213-3) 

{2  =  Q\  +  r(p  -  7T  sin(£2i  +6°)cotr)         i  =  i\  +T7rcos(f2]  +6°) 
u  -  W]  +  r7r  si  in  L 2|  +  6°)  cosec  j 

where  p,  m,  n,  and  n  are  the  annual  rates,  evaluated  at  t\. 

3.214  Newcomb's  Precession  A  section  on  Newcomb's  precession  angles  has  been 
included  since  it  is  relevant  for  the  transformation  of  old  catalogs.  Since  Newcomb's 
value  of  the  precession  constant  (Newcomb,  1895)  came  into  general  use,  several 
representations  have  been  used  for  the  practical  realization  of  the  accumulated 
precession  angles  denoted  by  Coi  Z>  and  9,  which  distinguishes  them  from  Lieske's 
precession  angles  C\,  Za,  and  9A.  One  may  cite  the  formulations  given  in  the  Ex- 
planatory Supplement  (1961),  the  development  by  Andoyer  (1911),  from  which  the 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


107 


Table  3.214.1 

Precession  Angles  1984  January  1d0h 


Woolard  and  Clemence 

Kinoshita 

ES 

Adopted 

Co 

783.  70925 

783. 70938 

783.  70798 

783. 7092 

z 

783.80093 

783.  80106 

783. 79942 

783. 8009 

e 

681 . 38830 

681 . 38849 

681.38732 

681.3883 

discussion  by  Woolard  and  Clemence  (1966)  was  drawn,  and  the  formulation  given 
in  the  introduction  to  the  SAOC  (1966),  as  well  as  a  more  recent  discussion  by  Ki- 
noshita (1975)  and  repeated  by  Aoki  et  al.  (1983),  where  the  discussion  is  carried 
to  one  more  significant  figure  than  that  given  by  Andoyer. 

Among  the  various  representations,  differences  in  the  accumulated  precession 
angles  of  the  order  of  1  mas  are  found  in  as  short  a  time  as  30  years.  For  example, 
a  comparison  of  results  from  Woolard  and  Clemence  (1966),  Kinoshita  (1975),  and 
the  Explanatory  Supplement  (ES)  for  the  accumulated  precession  angles  £o>  Z,  and 
6  between  equinox  and  equator  of  B1950.0  and  the  equinox  and  equator  of  1984 
Jan  ld0h  is  shown  in  Table  3.214.1. 

Results  from  the  Kinoshita  formulation  agree  with  that  of  Woolard  and  Clem- 
ence at  the  0.1  mas  level.  Disagreement  of  the  results  from  the  ES  at  the  1  to  2  mas 
level  is  brought  about  by  the  neglect  of  higher-order  terms  in  the  ES  (p.  30).  The 
Andoyer  (Woolard  and  Clemence)  expressions  for  the  precession  angles  are 

Co  =  (23035'.'545  +  139"720f,  +  0'.'060ff ) r  +  (30'.'240  -  0"270f1) r2  +  17'.'995 r3 
z  =  (23035  :'545  +  139"720jr,  +o:'060r|)r  +  (109"480  +  0'.'39QffK2  +  18'.'325t3 
6  =  (2005 r.'12  -  85:29 4  -  0?37  tf)r  +  (-42'.'65  -  0737  h)r2  -  41'.'80  r3 

(3.214-1) 

where  f]  and  ti  are  the  intervals  in  units  of  1000  tropical  years  of  365242.198782 
days  between  the  initial  fixed  epoch  eF  and  B1850.0,  and  between  the  final  epoch 
of  date  eo  and  B1850.0,  respectively;  thus 

fl  =  (sr  -  B1850.0)  /  (1000  tropical  years), 
t2  =  (sD  -  B1850.0)  /  (1000  tropical  years), 


and    t  =  ti  —  t\. 


(3.214-2) 


1  08  EXPLANATORY  SUPPLEMENT 

The  rates  of  general  precession  in  right  ascension  mo  and  declination  no  are 
given  by 


4607l'.'090  +  279:'440/i  +0l'120/f 
2005 1  r  1 2  -  85?29  r,  -  0:'37 1\  (3.214-3) 

3.215  Approximate  Reduction  for  Precession  and  Nutation  The  following  formu- 
las are  based  on  the  day  number  method  (see  Section  3.341),  and  transform  the 
right  ascension  and  declination  (ao,  ^o)  from  the  standard  epoch  and  equinox  of 
J2000.0  to  the  true  equinox  and  equator  of  date, 

a  =  o-q  +  /  +  g  sin(G  +  a0)  tan  60, 

6  =  60+gcos(G  +  a0),  (3.215-1) 
where  /,  g,  and  G  are  given  by 

f  =  M  +  A(m/n)  +  E, 
g  =  (B2  +  (A+N)2)v\ 

C  =  tan-'(B/(A  +  A0)+  ^M.  (3.215-2) 

The  expressions  for  /,  g,  and  G  are  an  extension  of  the  use  of  the  day  numbers, 
which  apply  precession  and  nutation  from  the  epoch  t  (e.g.,  the  middle  of  the  nearest 
year)  only  to  the  epoch  of  date  r+r,  where  T  is  the  fraction  of  a  year.  Thus  A,  B,  and 
E  are  the  Besselian  day  numbers,  and  m  and  n  are  the  annual  rates  of  precession 
(see  Section  3.342).  The  additional  terms  M  and  N  (Equation  3.213-2),  which  are 
the  accumulated  precession  angles,  are  requiredHo  apply  precession  from  J2000.0 
to  epoch  t. 

The  values  of  /,  g,  and  G  are  tabulated  at  10-day  dates  in  The  Astronomical 
Almanac. 


no  =  —(9)\T=0  - 
or 


3.216  Differential  Precession  and  Nutation  The  corrections  for  differential  preces- 
sion and  nutation  are  given  below.  These  are  to  be  added  to  the  observed  difference 
in  the  right  ascension  and  declination,  Aq  and  AS,  of  an  object  relative  to  a  com- 
parison star  to  obtain  the  differences  in  the  mean  place  for  a  standard  epoch  (e.g., 
J2000.0  or  the  beginning  of  the  year).  The  differences  Aa  and  AS  are  in  the  sense 
"object  -  comparison  star,"  and  the  corrections  are  in  the  same  units  as  Aa  and 
AS.  In  the  correction  to  right  ascension  the  same  units  must  be  used  for  Aa  and  AS. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 

correction  to  right  ascension  = 
correction  to  declination  = 
where    e  = 

/  = 


109 

e  tan  S  Aa-  j  sec2  S  AS, 
/Aa, 

—  cos  a  (nt  +  sin  e  A^)  -  sin  a  Ae, 
+  sin  a  (nt  +  sin  e  Ail')  -  cos  a  Ae, 


e  =  23?44,  (3.216-1) 

t  is  the  time  from  the  standard  epoch  to  the  time  of  observation,  and  n  the  rate 
of  precession  in  declination.  If  /  is  in  years  then  n  is  in  radians  per  year,  and  Axjj 
and  Ae  are  the  nutations  in  longitude  and  obliquity  at  the  time  of  observation, 
expressed  in  radians. 

The  errors  in  arc  units  caused  by  using  these  formulas  are  of  order  lO-8^  sec2  <5 
multiplied  by  the  displacement  in  arc  from  the  companion  star. 

3.22  Nutation 

The  long-period  motion  of  the  Earth's  rotation  axis  with  respect  to  the  axis  of 
the  ecliptic  caused  by  lunisolar  torque  is  call  lunisolar  precession.  The  short-period 
motion  of  the  Earth's  rotation  axis  with  respect  to  a  space-fixed  coordinate  sys- 
tem is  called  nutation.  It  is  intimately  connected  with  polar  motion,  which  is  the 
movement  of  the  Earth's  rotation  axis  with  respect  to  an  Earth-fixed  coordinate 
system.  This  short-period  rotational  motion  of  the  Earth  includes  effects  of  both 
forced  motion  and  free  motion.  The  forced  motion  is  due  to  the  torque  produced  by 
the  gravitational  attraction  of  the  Moon  and  to  a  lesser  extent  that  of  the  Sun  and 
planets  on  the  equatorial  bulge  of  the  Earth  and  any  deformations  of  the  Earth. 
For  the  free  motion,  the  external  forces  are  set  to  zero  in  the  equations  of  motion, 
which  then  yield  particular  integrals.  The  free  motion  can  be  determined  only  from 
observations  and  may  be  excited  by  internal  processes.  If  the  Earth  were  a  rigid 
body,  it  would  be  possible  to  compute  the  coefficients  of  the  forced  periodic  terms. 
The  observed  values  of  some  of  the  terms  are  different  from  the  calculated  values, 
because  of  the  difficulty  of  modeling  the  nonrigidity  of  the  Earth.  The  principal 
difference  occurs  in  the  coefficient  of  the  18.6-year  nutation  terms,  which  is  known 
as  the  constant  of  nutation. 

The  reference  pole  for  nutation  and  polar  motion  is  called  the  Celestial  Ephem- 
eris  Pole.  It  is  chosen  to  be  along  the  axis  of  figure  for  the  mean  surface  of  a  model 
of  Earth  in  which  the  free  motion  has  zero  amplitude.  This  pole  has  the  advan- 
tage that  it  has  no  nearly  diurnal  components  of  motion  with  respect  to  either 
a  space-fixed  or  an  Earth-fixed  coordinate  system.  Previously,  the  ephemeris  pole 
was  chosen  to  be  the  instantaneous  axis  of  rotation,  but  it  was  pointed  out  by 
Atkinson  (1973,  1975)  that  this  led  to  quasi-diurnal  motions  and  was  not  the  best 
reference  pole. 


1 1 0  EXPLANATORY  SUPPLEMENT 

The  Celestial  Ephemeris  Pole  is  the  axis  about  which  the  diurnal  rotation  of 
the  Earth  is  applied  in  the  transformation  between  celestial  and  terrestrial  frames, 
and  so  it  is  often  referred  to  as  the  axis  of  rotation  in  general  discussions,  as  it  was 
in  the  first  paragraph  of  this  section.  It  may  also  be  referred  to  as  the  true  celestial 
pole  of  date  (IAU,  1976). 

3.221  Celestial  Ephemeris  Pole  The  principal  axes  of  a  body  are  the  orthogonal 
directions  that  define  a  cartesian  coordinate  system  in  which  the  moment  of  inertia 
tensor  is  a  diagonal  matrix,  i.e.,  the  products  of  inertia  are  zero.  For  a  rigid  ellipsoid 
of  revolution,  two  of  the  principal  moments  of  inertia  are  equal,  and  the  principal 
moment  is  larger  about  the  third.  This  latter  axis  is  the  axis  of  figure.  The  Earth 
imperfectly  resembles  an  ellipsoid  of  revolution,  and,  in  addition,  is  elastic.  Thus 
its  inertial  tensor,  and  the  directions  of  the  principal  axes,  are  functions  of  time. 
Nevertheless,  the  instantaneous  axis  of  figure  F  can  be  defined  as  the  line  passing 
through  the  center  of  mass  of  the  Earth,  which  is  parallel  to  the  primary  eigenvector 
of  the  instantaneous  inertia  tensor  of  the  Earth.  The  intersection  of  F  with  the 
surface  of  the  Earth  is  the  instantaneous  pole  of  figure. 

The  instantaneous  axis  of  figure  of  a  deformabie  Earth  is  subject  to  substantial 
motions  due  to  distortions  of  the  Earth,  such  as  those  caused  by  the  body  tides. 
This  effect  makes  it  difficult  to  interpret  the  motions  of  axis  F,  above,  in  terms  of 
intuitive,  rigid-body  concepts.  It  then  becomes  useful  to  define  the  mean  surface 
geographic  axis,  B,  as  an  axis  attached  in  a  least-squares  sense  to  the  Earth's  outer 
surface.  Consider  a  network  of  observatories  on  a  rigid  Earth  and  an  axis  fixed 
with  respect  to  the  positions  of  the  observatories.  The  only  possible  motion  of  the 
observatory  network  is  a  possibly  time- dependent,  rigid  rotation;  that  portion  of 
the  rigid  rotation  which  is  not  parallel  to  the  axis  will  cause  motion  of  the  axis  as 
the  latter  follows  motions  of  the  observatories  defining  it.  On  a  deformabie  planet 
we  must  allow  for  the  possibility  of  other  motions  of  the  observatories,  and  we 
generalize  the  definition  of  the  axis  so  that  it  is  defined  in  a  least-squares  sense  by 
the  position  of  the  observatories.  The  axis  B  is  exactly  this  axis  in  the  limit  of  an 
infinite  number  of  uniformly  distributed  observatories.  Thus  if  we  decompose  the 
motion  of  the  Earth's  surface  into  a  mean  rigid  rotation  plus  a  residual  deformation, 
B  moves  with  the  sense  prescribed  by  the  mean  rotation.  The  axis  B  does  not 
respond  to  body  tides.  Note  that  for  a  rigid  Earth  B  coincides  with  F  at  all  times. 
There  is  no  nontidal  periodic  motion  of  observatories  on  the  Earth  with  respect  to 
B.  There  are  motions  of  observatories  with  respect  to  B  caused  by  crustal  motions 
and,  of  course,  by  tidal  forces. 

The  Conventional  International  Origin,  the  CIO,  was  defined  by  adopted  lati- 
tudes of  the  five  International  Latitude  Service  (ILS)  observatories  contributing  to 
the  International  Polar  Motion  Service  (IPMS)  (Markowitz  and  Guinot,  1968).  It 
is  not  known  whether  the  CIO  is  fixed  with  respect  to  B,  but  it  is  believed  that  the 
CIO  roughly  coincides  with  the  mean  pole  F  over  the  period  1900  to  1905.  Later  the 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


111 


terrestrial  pole  was  defined  by  a  larger  number  of  observatories  operating  optical 
equipment  (e.g.,  PZT's).  This  system  attempted  to  maintain  continuity  with  the 
CIO  system.  It  was  coordinated  by  the  Bureau  International  de  l'Heure  (BIH),  and 
so  it  is  called  the  BIH  pole.  More  recently  SLR  and  VLBI  have  become  the  most 
accurate  observational  techniques,  and  the  BIH  pole  became  strongly  dependent 
on  these  data.  In  1988  January  the  international  activities  of  timekeeping  and  of 
monitoring  Earth  orientation  were  separated,  and  the  maintenance  of  the  terrestrial 
reference  frame  was  taken  over  by  the  International  Earth  Rotation  Service  (IERS), 
again  attempting  to  maintain  the  same  pole  as  the  CIO  and  BIH,  but  because  of  the 
higher  accuracies  now  obtained  it  is  necessary  to  include  a  model  of  plate  motions 
in  the  reduction  of  observations.  This  reference  frame  is  called  the  IERS  Terres- 
trial Reference  Frame  (ITRF).  International  timekeeping  is  now  coordinated  by  the 
Bureau  International  des  Poids  et  Mesures  (BIPM). 

The  terms  nutation  and  polar  motion  have  been  defined  as  the  forced  and  free 
motions,  respectively,  of  the  adopted  reference  pole  (the  Celestial  Ephemeris  Pole), 
but  in  some  cases  the  separation  of  these  effects  is  not  clear.  The  forced  solution  is 
the  solution  of  the  Earth's  equations  of  rotational  motion  that  accounts  for  all  the 
external  forces  (specifically  the  gravitational  forces  due  to  the  Sun,  Moon,  and  plan- 
ets). The  free  solution  is  that  solution  which  results  from  setting  the  external  forces 
to  zero  (the  particular  solution  of  the  differential  equations) .  For  a  rigid  Earth  this 
results  in  the  Eulerian  free  motion,  a  component  of  polar  motion,  which  would  have 
annual  periods  in  a  terrestrial  frame.  For  a  nonrigid  Earth  the  period  is  lengthened 
to  about  14  months,  and  is  called  the  Chandler  component  of  polar  motion.  Hence 
the  forced  annular  polar  motion  due  to  the  climate  along  with  motions  resulting 
from  geophysical  strains  and  meteorological  effects  should  logically  be  included  in 
nutation,  but  in  practice  they  are  included  in  polar  motion  because  these  effects 
cannot  be  calculated  as  accurately  as  the  external  forcing  effects. 

For  an  Earth  with  a  fluid  core  there  exist  a  second  free  solution,  the  so-called 
nearly  diurnal  free  polar  motion  (also  called  the  nearly  diurnal  free  wobble  or  the 
free  core  nutation),  which  has  not  yet  been  clearly  observed.  Like  polar  motion  it 
is  part  of  the  transformation  from  space-fixed  to  body-fixed  coordinates  (Yatskiv, 
1980). 

3.222  The  1980  IAU  Theory  of  Nutation  and  Reduction  The  1980  IAU  Theory  of 
Nutation  was  computed  for  the  Celestial  Ephemeris  Pole  by  determining  the  nu- 
tations in  longitude  and  obliquity  of  a  rigid  Earth  (Kinoshita,  1977),  and  making 
modifications  for  the  nonrigid  Earth  model  1066  A  (Gilbert  and  Dzieiwonski,  1975) 
by  Wahr  (1981)  in  such  a  fashion  that  there  are  no  nearly  diurnal  motions  of  this 
celestial  pole  with  respect  to  either  space-fixed  or  body-fixed  (crust-fixed)  coordi- 
nates. Tables  3.222.1  and  3.222.2  give  the  1980  IAU  Nutation  series  and  the  set  of 
fundamental  arguments  (Van  Flandern,  1981)  based  on  the  orbital  motion  of  the 
Earth  and  Moon  needed  for  evaluating  the  series. 


Table  3.222.1 

Nutation  in  Longitude  and  Obliquity  Referred  to  the  Mean  Ecliptic  of  Date 


Argument  Coefficient  for 

Multiple  of  Period  Longitude  Obliquity 


No. 

/ 

1 

Si 

a 
k 

F 

D 

Q 

Bt 

fdays) 

Si 

1"  *  10 

-4 

1 

0 

o 

6798.4 

—  1 7 1 996 

—  174.2  7 

92025 

+8.9  7 

2 

rt 
K) 

o 

2 

2062 

+0.2  7 

—  895 

+0.5  7 

3 

—  2 

0 

2 

0 

1 

1305.5 

46 

 24 

4 

2 

0 

-2 

0 

0 

1095.2 

11 

0 

5 

-2 

0 

2 

0 

2 

1615.7 

-3 

1 

6 

1 

— 1 

0 

—3 

0 

7 

0 

— 2 

z 

—  2 

1 

6786.3 

—2 

1 

Q 

2 

0 

—2 

o 

1 

943.2 

•| 

g 

g 

0 

0 

2 

-2 

2 

182.6 

-13187 

-1.67 

5736 

-3.1  7 

10 

0 

1 

0 

0 

0 

365.3 

1426 

—3.4  T 

54 

-0.1  7 

1 1 

0 

1 

2 

— 2 

2 

121 .7 

—517 

+1.2  7 

224 

-0.6  7 

12 

0 

—  1 

2 

—2 

2 

365.2 

217 

—0.5  7 

-95 

+0.3  T 

13 

o 

o 

2 

_2 

177  8 

129 

+0  1  7 

— 70 

14 

2 

0 

0 

-2 

0 

205.9 

48 

1 

15 

0 

0 

2 

-2 

0 

173.3 

-22 

0 

16 

0 

2 

0 

0 

0 

182.6 

17 

—0.1  7 

0 

17 

0 

1 

0 

0 

1 

386.0 

- 15 

9 

1B 

o 

2 

2 

_2 

2 

91.3 



+0  1  7 

ig 

0 

-1 

0 

0 

"1 

346.6 

-12 

6 

20 

-2 

0 

0 

2 

1 

199.8 

-6 

3 

21 

0 

—  1 

2 

—  2 

1 

346.6 

—5 

3 

22 

2 

0 

0 

—2 

1 

212.3 

4 

-2 

23 

0 

2 

_2 

■J 

1 19  6 

4 

— 2 

24 

1 

0 

0 

-1 

0 

411.8 

-4 

0 

25 

2 

'  T 

0 

-2 

0 

131.7 

1 

0 

26 

0 

— 2 

2 

1 

169.0 

0 

jj 

1 

— 2 

2 

0 

329.8 

0 

28 

0 

o 

2 

409  2 

0 

29 

-1 

0 

0 

1 

1 

38B.3 

g 

30 

0 

1 

2 

-2 

0 

117.5 

0 

31 

g 

y 

2 

0 

2 

13.7 

—2274 

—0.2  7 

977 

-0.5  7 

32 

0 

0 

0 

0 

27.6 

712 

+0.1  7 

—7 

33 

0 

o 

2 

o 

■| 

13  6 

-0.4  7 

200 

34 

1 

0 

2 

0 

2 

9.1 

-301 

129 

—0.1  7 

35 

1 

0 

0 

-2 

0 

31.8 

-158 

_1 

36 

,  ^ 

0 

2 

0 

2 

27.1 

123 

-53 

37 

U 

0 

0 

2 

0 

14.6 

63 

-2 

38 

1 

o 

o 

o 

■| 

£7  7 

63 

+0. 1  7 

—33 

39 

-1 

0 

0 

0 

1 

27.4 

—58 

—0.1  7 

32 

40 

-1 

0 

2 

2 

2 

9.6 

-59 

26 

41 

1 

0 

2 

0 

1 

9.1 

-51 

27 

42 

0 

2 

2 

2 

7.1 

-38 

16 

43 

2 

o 

0 

0 

13  8 

29 

—  1 

44 

1 

0 

2 

-2 

2 

23.9 

29 

—  12 

45 

2 

0 

2 

0 

2 

6.9 

—31 

13 

46 

0 

0 

2 

0 

0 

13.6 

26 

-1 

47 

■1-1 

0 

2 

0 

1 

27.0 

21 

-10 

48 

0 

0 

2 

1 

32.0 

16 

-B 

49 

1 

0 

0 

-2 

1 

31.7 

-13 

7 

50 

-1 

0 

2 

2 

1 

9.5 

-10 

5 

51 

1 

1 

0 

-2 

0 

34.8 

-7 

0 

52 

0 

1 

2 

0 

2 

13.2 

7 

-3 

53 

0 

-1 

2 

0 

2 

14.2 

—7 

3 

54 

1 

0 

2 

2 

2 

5.6 

-8 

3 

55 

1 

0 

0 

2 

0 

9.6 

6 

0 

3  /  CELESTIAL  REFERENCE  SYSTEMS 


113 


Table  3.222.1,  continued 

Nutation  in  Longitude  and  Obliquity  Referred  to  the  Mean  Ecliptic  of  Date 


Argument 

Coefficient  lor 

Multiple  of 

Period 

Longitude  Obliquity 

No. 

/ 

F 

D 

Si  d 

i 

3j 

hi 

Ql 

(days) 

r  x io-4 

56 

2 

0 

2 

- 

. 

6  —3 

57 

0 

0 

0 

2 

1 

14  B 

 g  3 

58 

q 

o 

2 

2 

1 

7,1 

-7  3 

59 

1 

o 

2 

-2 

1 

23.9 

6  -3 

60 

0 

0 

0 

-2 

1 

14.7 

-5  3 

61 

1 

—1 

o 

0 

0 

29.8 

ft  ft 

62 

2 

o 

2 

0 

1 

6.9 

— D  o 

63 

1 

0 

_2 

0 

15.4 

-4  0 

64 

1 

o 

—2 

0 

0 

26.9 

4  0 

65 

0 

0 

0 

■j 

0 

29.5 

-4  0 

66 

1 

1 

0 

0 

0 

25.6 

— J  u 

67 

1 

o 

2 

0 

0 

9.1 

68 

"I 

—1 

2 

0 

2 

9.4 

-3  1 

69 

-1 

—1 

2 

2 

2 

9.8 

-3  1 

70 

-2 

0 

0 

0 

1 

13.7 

-2  1 

71 

3 

o 

2 

0 

2 

Q  1 

72 

0 

_1 

2 

2 

2 

7.2 

— o  I 

73 

■I 

1 

2 

0 

2 

8.9 

2  -1 

74 

-1 

o 

2 

-2 

1 

32.6 

-2  1 

75 

2 

0 

0 

0 

1 

13.8 

2  -1 

76 

1 

o 

o 

0 

2 

27.8 

—2  1 

77 

3 

o 

o 

0 

0 

9.2 

78 

q 

o 

2 

1 

2 

9.3 

2  -1 

79 

-1 

o 

o 

0 

2 

27.3 

1  -1 

ao 

1 

0 

0 

-4 

0 

10.1 

-1  0 

81 

2 

o 

2 

2 

2 

14.6 

1                    —  i 

82 

—  1 

o 

2 

4 

2 

5.8 

—  e.  I 

83 

2 

o 

o 

_4 

0 

15.9 

-1  0 

84 

1 

1 

2 

-2 

2 

22.5 

1  -1 

85 

1 

0 

2 

2 

1 

5.6 

-1  1 

86 

—2 

o 

2 

4 

2 

7.3 

—  1  1 

S7 

—  1 

o 

4 

0 

2 

9.1 

1  0 

88 

i 

o 

_2 

0 

29.3 

1              '  If 

89 

2 

o 

2 

-2 

1 

12.8 

1  -1 

90 

2 

0 

2 

2 

2 

4.7 

-1  0 

91 

1 

o 

o 

2 

1 

9.6 

  4  Q 

92 

0 

q 

4 

—  2 

2 

12.7 

1  ft 

93 

o 

2 

 2 

2 

8.7 

,   in'  o 

94 

1 

o 

2 

-2 

0 

23.8 

-1  0 

95 

0 

1 

2 

0 

1 

13.1 

1  0 

96 

' 

—  1 

o 

2 

1 

35,0 

1  0 

97 

0 

0 

0 

1 

13.6 

—  1  0 

98 

o 

0 

2 

_  1 

2 

25.4 

—  1  0 

99 

0 

1 

0 

2 

0 

14.2 

-1  0 

100 

1 

0 

-2 

-2 

0 

9.5 

-1  o 

101 

0 

-1 

2 

0 

1 

14.2 

-1  0 

102 

1 

1 

0 

-2 

1 

34.7 

-1  o 

103 

1 

0 

-2 

2 

0 

32.8 

-1  0 

104 

2 

0 

0 

2 

0 

7.1 

1  0 

105 

0 

0 

2 

4 

2 

4.8 

-1  0 

106 

0 

1 

0 

1 

0 

27.3 

1  0 

114 


EXPLANATORY  SUPPLEMENT 


Table  3.222.2 

Fundamental  Arguments 

/  =  134°57'46'.,733  +  (1325r  +  1 98°  52' 02"633)  T  +  311310  T2  +  Ql'064  7"3 
P  =  357°31'391'804  +  (99r  +  359° 03' 01  l'224)T  -  0'.'577  T2  -  0:'012  T3 
F  =  93°  1 6'  1 8"877  +  (1 342r  +  82°  0 V  03!'  1 37)  T  -  1 3?257  T2  +  01'01 1  T3 
D  =  297°5r01"307  +  {1236r  +  307°06'4i:'328)r  -  61'891  T2  +  01'01 9  T3 
Q  =  135°02'401'280  -  {5r  +  134°08'  101'539)7"  +  7:'455  T2  +  O'.'OOS  7"3 

Note:  1 '  =  360°  and  T  =>  (JD  -  2451545. 0)  /  36525  is  the  number  of  Julian  centuries  of  36525  days 
of  86400s  of  dynamical  time  from  the  fundamental  epoch  of  J2000.0  to  date.  The  fundamental 
arguments  are: 

/  =  the  mean  longitude  of  the  Moon  minus  the  mean  longitude  of  the  Moon's  perigee, 
/'  =  the  mean  longitude  of  the  Sun  minus  the  mean  longitude  of  the  Sun's  perigee, 
F  =  the  mean  longitude  of  the  Moon  minus  the  mean  longitude  of  the  Moon's  node. 
D  =  the  mean  longitude  of  the  Moon  minus  the  mean  longitude  of  the  Sun.  i.e.,  the  mean 

elongation  of  the  Moon  from  the  Sun, 
f>  -  the  longitude  of  the  mean  ascending  node  of  the  lunar  orbit  on  the  ecliptic  measured  Jrom 

the  mean  equinox  of  date. 


Nutation  describes  the  motion  of  the  true  pole  relative  to  the  mean  pole  and 
may  be  resolved  into  the  components  Aip  in  longitude  and  Ae  in  obliquity,  which 
are  shown  in  Figure  3.222.1,  The  nutation  matrix  N  is  a  sequence  of  three  rotations 
which  uses  these  angles  and  the  mean  obliquity  of  the  ecliptic,  eo,  to  transform 
equatorial  coordinates  referred  to  the  mean  equinox  and  equator  of  date  to  the  true 
equinox  and  equator  of  date. 

The  rotations  are  a  rotation  of  eg  about  the  jr-axis,  which  transforms  the 
Ay-plane  from  the  mean  equator  of  date  to  the  mean  ecliptic  of  date  (see  Fig- 
ure 3.222.1),  followed  by  a  rotation  of  —  Aip  about  the  z-axis,  which  applies  nutation 
in  longitude  and  rotates  the  jr-axis,  pointing  toward  the  mean  equinox  of  date  T, 
to  the  true  equinox  of  date  TT,  and  lastly  a  rotation  of  — e,  the  true  obliquity  of 
date,  about  the  *-axis,  which  rotates  the  xy-plane  to  the  true  equator  of  date.  The 
expressions  for  the  mean  and  true  obliquity  of  date  are  given  by 

e0  =  23°26'2r.'448  -  46'.'8150  T  -  0'.'00059     +  0"001813  7"3,  (3.222-1) 

e  =  e0  +  Ae,  (3.222-2) 
where  T  =  (3D  —  245 1545. 0)  /  36525.  The  nutation  matrix  is 

N  =  Ri(-e)R3(-A#Rl(+eo))  (3.222-3) 


3  f  CELESTIAL  REFERENCE  SYSTEMS 


115 


Mean  ecliptic  of  date 

Mean  equator  of  date 
True  equator  of  date 


Figure  3.222.1 

The  mean  and  true  equators  of  date 


which  is  rewritten  in  full  as 

■    cos  Aip  -  sin  Aip  cos  e0  -  sin  Aip  sin  e0 

sin  Aip  cose    cos  A^  cos  e  cos  en  +  sin  e  sin  en    cos  Aip  cose  sin  en  —  sine  cos  eo 

-  sin  A^'  sin  e    cos  At/'  sin  e  cos  eo  -  cos  e  sin  e0    cos  Aip  sin  e  sin  e0  +  cos  e  cos  eo  - 

(3.222-4) 

Nutation  may  be  rigorously  applied  to  equatorial  rectangular  coordinates  thus: 


N  = 


r  =  Nr0, 


(3.222-5) 


where  the  position  vector  Tq  referred  to  the  mean  equinox  of  date  is  transformed  to 
the  position  vector  r  referred  to  the  true  equinox  of  date. 

The  nutation  matrix  is  taken  from  Emerson  (1973),  and  it  is  the  complete 
rotation  matrix  without  any  approximations.  The  nutation  angles  Aip,  Ae  may  be 
evaluated  from 


Aip  =       Sj  sin  A,-    and    Ae  =  ^  C,  cos  A, 


i=i 


where    A,  =  a;/  +  £>,/'  +  c,F  +  d,D  +  etQ 


(3.222-6) 


and  the  multipliers  Of,  tti,  c,,  dh  e„  and  the  coefficients  5,  and  C,  are  given  in 
Table  3.222.1,  which  defines  the  106  terms  of  the  IAU  (1980)  nutation  series.  The 
terms  of  the  series  are  grouped  according  to  their  periods,  and  arranged  roughly 
in  order  of  magnitude  of  the  coefficient  of  the  nutation  in  longitude  within  each 
group.  The  fundamental  arguments  /,  /',  F,  D,  and  f2,  in  the  FK5  reference  system, 
are  given  in  Table  3.222.2.  Values  for  these  nutation  angles  and  e,  calculated  using 
these  series,  are  tabulated  daily  in  The  Astronomical  Almanac. 


116 


EXPLANATORY  SUPPLEMENT 


3.223  The  Equation  of  the  Equinoxes  and  the  Uniform  Equinox  The  equation  of 
the  equinoxes,  which  in  editions  prior  to  1960  was  called  "nutation  in  right  ascen- 
sion," is  the  right  ascension  of  the  mean  equinox  referred  to  the  true  equator  and 
equinox  and  equals  A^cos  e.  In  Figure  3.222.1  it  is  represented  by  the  arc  TTQ  and 
it  represents  the  difference  between  the  true  and  mean  right  ascensions  of  a  body 
on  the  true  equator;  it  is  thus  the  difference  between  apparent  and  mean  sidereal 
time;  i.e., 

GAST  =  GMST  +  Ay  cos  e;  (3,223-1) 

where  GAST  and  GMST  are  the  Greenwich  apparent  and  mean  sidereal  times, 
respectively  (Section  2.23),  which,  together  with  the  equation  of  the  equinoxes  are 
tabulated  daily  to  OfOOOl  in  The  Astronomical  Almanac. 

It  is  sometimes  more  convenient  to  refer  right  ascensions  to  the  uniform  equinox 
[Q  in  Figure  3.222.1)  (Atkinson  and  Sadler,  1951),  which  is  the  true  equinox  of  date 
minus  the  equation  of  the  equinoxes.  The  advantages  are  that  in  the  determina- 
tion of  hour  angle,  right  ascensions  of  objects  referred  to  the  uniform  equinox  are 
subtracted  from  mean  sidereal  time.  These  right  ascensions  are  smoother  functions 
of  time  which  reduce  the  number  of  terms  required  when  they  are  represented  by 
polynomial  or  Fourier-type  expression  over  a  fixed  time  interval.  It  also  simplifies 
interpolation  if  tables  give  mean  sidereal  time  and  right  ascension  referred  to  the 
uniform  equinox. 

3.224  More  Accurate  Nutation  Recent  analysis  of  highly  accurate  observations 
(VLBI)  indicates  the  need  for  some  systematic  corrections  to  the  IAU  1980  Nuta- 
tion series.  Presumably  these  corrections  are  due  to  the  difference  of  the  real  Earth 
obtained  from  the  model  of  Wahr.  The  latest  differences  Herring  (1987)  published 
in  BIH  Annual  Report  for  1987  (1988)  are  given  in  Table  3.224.1.  The  corrections 


Table  3.224.1 

Corrections  to  IAU  1980  Nutation  Series 


Argument 

Coefficient  for 

Multiple  of 

Period 

Longitude  Obliquity 

No. 

t 

r 

F 

D 

f? 

LSn 

LCn         OCn  OSn 

n 

an 

br 

dn 

e„ 

days 

1"x  10-5 

1 

0 

0 

0 

0 

1 

6798.4 

-725 

417       213  224 

2 

0 

1 

0 

0 

0 

365.3 

523 

61       208  -24 

3 

0 

0 

2 

-2 

2 

182.6 

102 

-118      -41  -47 

4 

0 

0 

2 

0 

2 

13.7 

-81 

0        32  0 

3  /  CELESTIAL  REFERENCE  SYSTEMS 


117 


Arpc  and  Aec  to  be  added  to  the  IAU  1980  nutations  in  longitude  and  obliquity, 
Atj}  and  Ae,  respectively  are 

4 

At/;c  =  Mn4«  +  LC„  cos  A„), 

4 

Aec  =  ^2  (°c»  cosA"  +  0S"  sin  A»)>  (3.224- 1 ) 

n=l 

where  A„,  the  sum  of  the  required  arguments  is  given  in  Equation  3.222-6.  These 
corrections  are  made  up  of  two  terms:  the  first  terms,  LS„  for  longitude  and  OC„ 
for  obliquity  are  called  in-phase,  or  direct:  the  other  two  terms  LC„  and  OS„,  are 
called  out-of-phase,  or  indirect. 

There  are  other  effects  due  to  the  planets  that  are  called  the  planetary  terms 
in  nutation.  Vondrak  (1983)  has  produced  a  table  (Table  3.224.2)  of  85  terms  that 
gives  the  combined  direct  and  indirect  planetary  effects  that  have  a  maximum 
amplitude  of  several  parts  in  10~4  arcseconds  and  should  be  used  if  inilliarcsecond 
accuracy  is  required. 

The  planetary  nutation  in  longitude,  Aipp,  and  in  obliquity  Aep  may  be  calcu- 
lated from 

85 

Aij}p  -  ^2       sinA,,  +  LC„  cos  A„) 

n=l 
85 

Aep  =       (°C>>  cos  A»  +  0S"  sin  An)  (3.224-2) 
rf=1 

and    A„  =  a„  I  +  b„F  +  c„D  +  dnQ  +  enQ  +  f„V  +  gnE  +  h„M  +  inJ  +j„S 
where  LS„,  LC„,  OC„,  OS,,,  and  the  multipliers 

ani  bm  cni  /ni  £ni        '«i  find  jn 

are  given  in  Table  3.224.2.  The  fundamental  arguments  I,  F,  D,  and  J?  are  given  in 
Table  3.222.2.  Q,  V,  E,  M,  J,  and  5,  the  mean  heliocentric  longitudes  of  the  planets 
Mercury,  Venus,  Earth,  Mars,  Jupiter,  and  Saturn,  respectively,  are  given  as: 

Q  =252? 3+  149472.7  7       M=  353?3  +  19140. 3  T 

V=  179?9  +  58517. 8  T         J=  32?3  +  3034.9  7  (3.224-3) 

£=98?4  + 35999. 4  7  S=  48?0  +  1222. 1  7 

where  T  is  measured  in  Julian  centuries  from  2451545.0. 

The  IAU  is  at  present  studying  various  proposals  prior  to  adopting  an  improved 
nutation  series.  In  the  future  there  will  be  a  need  for  an  improved  nutation  transfor- 
mation with  improvements  to  both  the  rigid  body  and  nonrigid  body  components. 


Table  3.224,2 

Planetary  Terms  in  Nutation,  Combined  Direct  and  Indirect  Effects 


Argument 
Multiple  of 


Period 


Coefficient  for 
Longitude  Obliquity 


No. 

n 

/ 

F 

bn 

D 
Cn 

a 

dn 

G 
en 

V 

fn 

E 

9n 

m 

hn 

J 

in 

s 

in 

days 

LSn 

LCn 

r  x 

OCn 
10-5 

OSn 

1 

0 

n 
u 

Q 

0 

0 

o 

2 

Q 

o 

0 

1 83 

_1 

o 

o 

o 

2 

1 

0 

-2 

-1 

3 

0 

-1 

0 

0 

0 

12924 

0 

-1 

0 

0 

3 

0 

0 

0 

0 

0 

1 

-2 

0 

0 

0 

975 

0 

-1 

0 

0 

4 

0 

0 

0 

0 

0 

1 

-1 

0 

0 

0 

584 

16 

0 

0 

0 

5 

0 

0 

0 

0 

0 

1 

1 

0 

0 

0 

139 

-4 

0 

0 

1 

6 

0 

u 

u 

n 
u 

n 

i 

— o 

n 
yj 

ft 
u 

ft 
y 

_-| 

q 

o 

o 

7 

0 

0 

0 

0 

0 

2 

-4 

0 

0 

0 

488 

4 

0 

0 

3 

8 

0 

0 

0 

0 

0 

2 

-3 

0 

0 

0 

1455 

0 

7 

0 

0 

9 

0 

0 

0 

0 

0 

2 

-5 

0 

0 

0 

209 

0 

-1 

1 

0 

10 

0 

0 

0 

0 

0 

2 

-2 

0 

0 

0 

292 

-6 

t 

0 

0 

1 1 

u 

n 
u 

f\ 
U 

n 
U 

C. 

_  1 

u 

ft 

o 

162 

o 

2 

_-l 

Q 

12 

0 

0 

0 

0 

0 

2 

0 

0 

0 

0 

112 

4 

0 

0 

-2 

13 

0 

0 

0 

0 

0 

3 

-7 

0 

0 

0 

172 

1 

0 

0 

0 

14 

0 

0 

0 

0 

0 

3 

-6 

0 

0 

0 

325 

0 

-1 

0 

0 

15 

0 

0 

0 

0 

0 

3 

-5 

0 

0 

0 

2959 

20 

-4 

1 

7 

1  b 

u 

n 
u 

n 
U 

I 

n 
U 

— o 

£ 

0 

0 

o 

5240 

q 

•| 

o 

o 

17 

0 

0 

0 

0 

0 

3 

-4 

0 

0 

0 

417 

0 

4 

0 

0 

18 

0 

0 

0 

0 

0 

3 

-3 

0 

0 

0 

195 

2 

0 

0 

0 

19 

0 

2 

-2 

1 

0 

-3 

3 

0 

0 

0 

2061 

1 

0 

0 

-1 

20 

2 

0 

-2 

0 

0 

-3 

3 

0 

0 

0 

3562 

1 

0 

0 

0 

u 

U 

U 

u 

n 
u 

(9 

u 

fl 
u 

Q 

127 

o 

_1 

o 

22 

0 

0 

0 

0 

0 

4 

-7 

0 

0 

0 

734 

0 

1 

0 

0 

23 

0 

0 

0 

0 

0 

4 

-6 

0 

0 

0 

728 

-5 

1 

-1 

-2 

24 

0 

0 

0 

0 

0 

4 

-4 

0 

0 

0 

146 

1 

0 

0 

0 

25 

0 

0 

0 

0 

0 

5 

-8 

0 

0 

0 

2864 

0 

-3 

2 

0 

to 

n 
U 

ft 

u 

ft 
y 

ft 

u 

U 

e 

a 

—  f 

u 

n 
u 

2 

0 

n 

I 

27 

0 

2 

-2 

1 

0 

-5 

6 

0 

0 

0 

4948 

0 

-4 

-2 

0 

28 

0 

2 

-2 

0 

0 

-5 

6 

0 

0 

0 

18186 

0 

2 

0 

0 

29 

0 

0 

0 

0 

0 

5 

-5 

0 

0 

0 

117 

-1 

0 

0 

0 

30 

0 

0 

0 

0 

0 

6 

-9 

0 

0 

0 

485 

0 

-1 

0 

0 

n 
U 

U 

n 
U 

u 

n 
u 

c 

D 

n 
u 

n 
u 

u 

1 

**"  1 

n 

ft 

_1 

32 

2 

0 

2 

0 

0 

-6 

8 

0 

0 

0 

17496 

-1 

0 

0 

0 

33 

0 

0 

0 

0 

0 

7 

-9 

0 

0 

0 

154 

1 

0 

0 

0 

34 

0 

0 

0 

0 

0 

8 

-10 

0 

0 

0 

122 

-1 

0 

0 

0 

35 

0 

0 

0 

0 

0 

8 

-15 

0 

0 

0 

183 

-1 

-1 

0 

0 

ob 

0 

0 

0 

0 

0 

8 

—13 

0 

0 

0 

87265 

3 

— 4 

V 

ft 
u 

Jf 

0 

0 

0 

1 

0 

8 

—13 

0 

0 

0' 

7373 

1 

1 

u 

n 
u 

38 

0 

0 

0 

i . 

0 

-8 

13 

0 

0 

0 

6307 

-1 

1 

0 

0 

39 

0 

0 

0 

0 

0 

8 

-11 

0 

0 

0 

182 

-1 

-1 

0 

0 

40 

1 

0 

0 

-1 

0 

-10 

3 

0 

0 

0 

6733 

0 

-1 

0 

0 

41 

0 

0 

1 

0 

-10 

3 

0 

0 

0 

6665 

0 

-1 

0 

0 

42 

0 

0 

-1 

0 

-18 

16 

0 

0 

0 

7296 

1 

0 

0 

0 

43 

0 

0 

1 

0 

-18 

16 

0 

0 

0 

6364 

1 

0 

0 

0 

44 

-2 

0 

-2 

0 

-18 

16 

0 

0 

0 

14 

1 

-1 

0 

1 

45 

2 

0 

2 

0 

-18 

16 

0 

0 

0 

14 

1 

-1 

0 

-1 

3  /  CELESTIAL  REFERENCE  SYSTEMS 


119 


Table  3.224.2,  continued 

Planetary  Terms  in  Nutation,  Combined  Direct  and  Indirect  Effects 


Argument 
Multiple  of 


Coefficient  for 
Period      Longitude  Obliquity 


No. 

/ 

F 

D 

S2 

o 

V 

e 

M 

J 

S 

LSn 

LCn 

OCn 

osns 

n 

3n 

K 

On 

Cn 

fir. 

J  n 

yn 

hn 

in 

jn 

days 

T  x 

-«— 5 

46 

i 

0 

-2 

1 

0 

20 

-21 

0 

0 

0 

14610 

0 

1 

1 

0 

47 

0 

0 

0 

0 

0 

0 

1 

-1 

0 

0 

780 

-1 

0 

0 

0 

48 

0 

0 

0 

0 

0 

0 

1 

2 

0 

0 

177 

-1 

-1 

0 

0 

49 

0 

0 

0 

0 

0 

0 

1 

-2 

0 

0 

5764 

-5 

3 

0 

0 

50 

0 

0 

0 

1 

0 

0 

-1 

2 

0 

0 

37883 

-6 

-6 

-3 

3 

51 

0 

0 

0 

0 

0 

0 

0 

2 

0 

0 

344 

-1 

0 

0 

0 

52 

0 

0 

0 

0 

0 

0 

2 

-2 

0 

0 

390 

-4 

0 

0 

0 

53 

0 

0 

0 

0 

0 

0 

3 

-2 

0 

0 

189 

1 

-1 

0 

0 

54 

0 

0 

0 

0 

0 

0 

4 

-2 

0 

0 

124 

1 

o 

o 

-1 

55 

0 

0 

0 

0 

0 

0 

2 

-3 

0 

0 

902 

-1 

0 

0 

0 

56 

0 

0 

0 

0 

0 

0 

2 

-4 

0 

0 

2882 

0 

1 

0 

0 

57 

0 

0 

0 

0 

0 

0 

3 

-4 

0 

0 

418 

-1 

1 

0 

0 

58 

0 

0 

0 

0 

0 

0 

2 

-8 

3 

0 

183 

1 

-4 

2 

0 

59 

0 

0 

0 

1 

0 

0 

-4 

8 

-3 

0 

6870 

1 

4 

2 

-1 

60 

0 

0 

0 

1 

0 

0 

4 

-8 

3 

0 

6720 

-1 

3 

2 

1 

61 

0 

0 

0 

0 

0 

0 

6 

-8 

3 

0 

183 

-4 

-2 

-1 

62 

0 

0 

0 

0 

0 

0 

1 

0 

-3 

0 

489 

1 

0 

0 

0 

63 

0 

0 

0 

0 

0 

0 

2 

0 

-3 

0 

209 

1 

0 

0 

0 

64 

2 

0 

-2 

-1 

0 

0 

-2 

0 

3 

0 

4528 

1 

0 

0 

1 

65 

2 

0 

-2 

1 

0 

0 

-2 

0 

3 

0 

13630 

2 

0 

0 

-1 

66 

2 

0 

-2 

0 

0 

0 

-2 

0 

3 

0 

13563 

4 

0 

0 

0 

67 

0 

0 

0 

0 

0 

0 

1 

0 

-2 

0 

439 

-2 

3 

0 

0 

68 

0 

0 

0 

0 

0 

0 

2 

0 

-2 

0 

199 

4 

0 

0 

0 

69 

2 

0 

-2 

-1 

0 

0 

-2 

0 

2 

0 

100130 

-5 

0 

0 

-3 

70 

2 

0 

-2 

1 

0 

0 

-2 

0 

2 

0 

3288 

1 

0 

0 

0 

71 

0 

2 

-2 

1 

0 

0 

-2 

0 

2 

0 

1642 

1 

0 

0 

0 

72 

2 

0 

-2 

0 

0 

0 

-2 

0 

2 

0 

6366 

4 

0 

0 

0 

73 

0 

0 

0 

0 

0 

0 

3 

0 

-2 

0 

129 

1 

-1 

0 

0 

74 

0 

0 

0 

0 

0 

0 

4 

0 

-2 

0 

95 

-2 

0 

0 

1 

75 

0 

0 

0 

0 

0 

0 

1 

0 

-1 

0 

399 

-16 

0 

0 

0 

76 

0 

0 

0 

0 

0 

0 

2 

0 

0 

191 

-2 

0 

0 

1 

77 

0 

0 

0 

0 

0 

0 

3 

0 

0 

125 

5 

1 

0 

2 

78 

0 

0 

0 

0 

0 

0 

0 

0 

0 

4333 

-1 

-1 

-1 

0 

79 

0 

0 

0 

1 

0 

0 

0 

0 

0 

11945 

0 

-1 

0 

0 

80 

0 

0 

0 

0 

0 

0 

1 

0 

0 

337 

-1 

0 

0 

1 

81 

0 

0 

0 

0 

0 

0 

2 

0 

1 

0 

175 

2 

0 

0 

-1 

82 

0 

0 

0 

0 

0 

0 

0 

0 

2 

0 

2166 

-12 

2 

1 

0 

4 

83 

0 

0 

0 

0 

0 

0 

1 

0 

2 

0 

313 

0 

-1 

0 

84 

0 

0 

0 

0 

0 

0 

0 

0 

3 

0 

1444 

-1 

0 

0 

0 

85 

0 

0 

0 

0 

0 

0 

1 

0 

0 

-1 

378 

-1 

0 

0 

0 

Explanatory  Supplement  to  The  Astronomical  Almanac,  seventh  proof,  July  3tf,  1992 


1 20  EXPLANATORY  SUPPLEMENT 

3.225  Approximate  Nutation  and  Reduction  The  nutation  matrix  given  in  Equa- 
tion 3.222-4  can  be  simplified  to 


N  = 


l  -A^cose  -A^sine 

+ Accost  1  -Ae 

+A^sine        +Ae  ] 


(3.225-1) 


where  Aip  and  Ae  are  expressed  in  radians  and  second-order  terms  have  been 
neglected,  since  they  can  reach  only  one  unit  in  the  eighth  decimal  place. 

Equatorial  rectangular  coordinates  referred  to  the  mean  equinox  can  be  con- 
verted to  the  true  equinox  by  application  of  the  corrections 

Ax  -  -{ycos  £  +  zsin  e)A^, 
Ay  -  +jccos  eAip  -  zAe, 

Az  =  +xsineAi£>  +  yAe.  (3.225-2) 

Similarly  the  first-order  corrections  (Aa,  AS)  to  right  ascension  and  declination 
may  be  calculated  directly  from 

Aa  =  (cos  e  +  sin  e  sin  a  tan  6)A  tl>  -  cos  a  tan  SAe, 

AS  =  sine  cos  aA4>  +  sin  aAe.  (3.225-3) 

These  can  be  combined  with  the  reduction  for  precession  from  the  mean  equinox 
of  the  middle  of  the  year  by  means  of  day  numbers  (see  Sections  3.215  and  3.34). 

It  is  also  possible  to  calculate  the  nutations  in  longitude  and  obliquity  to  about 
1"  by  considering  only  the  dominant  terms  of  the  series  (see  Table  3.222.1),  thus 

A^>  -  -0°0048  sin(125?0  -  O?05295rf)  -  0?0004sin  (200?9  +  l°97129rf) 
Ae  =  +0?0026  cos  (125?0  -  0?05295i/)  +  0?0002  cos  (200?9  +  1  ?97 129rf), 

(3.225-4) 

where  d  is  the  number  of  days  from  2451545.0. 


3.226  Differential  Nutation  For  objects  within  a  small  area  of  sky  differential  nu- 
tation is  always  combined  with  differential  precession;  see  Section  3.216. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 

3.23   Space  Motion 


121 


The  motion  in  space  of  stellar  objects  as  a  function  of  time  must  be  considered  since 
star  catalogs  give  the  position  of  a  star  at  an  epoch  referred  to  a  mean  equator  and 
equinox  at  a  chosen  epoch. 

Traditionally,  stellar  motion  has  been  divided  into  proper  motion,  which  occurs 
perpendicular  to  the  line  of  sight  and  is  given  as  components  in  right  ascension  (pa) 
and  declination  {p&),  and  radial  velocity  r,  which  occurs  along  the  line  of  sight.  In 
fundamental  catalogs  the  epoch  of  the  star  positions  is  identical  with  that  of  the 
equinox  to  which  the  catalog  refers,  but  in  observational  catalogs  the  epoch  may 
differ  from  that  of  the  equinox  to  which  the  positions  are  referred.  In  all  cases, 
the  correction  to  position  consists  of  the  product  of  the  star's  space  motion  vector 
with  the  interval  between  the  required  epoch  and  the  epoch  of  the  star's  position 
in  the  catalog.  In  some  catalogs  the  secular  variations  of  the  proper  motions  are 
also  included,  and  in  such  cases  the  mean  value  of  the  proper  motion  during  the 
interval  must  be  used.  For  double  stars  the  orbital  motion  of  the  components  with 
respect  to  each  other  may  also  have  to  be  included. 

The  position  vector  r  of  a  star  at  the  catalog  epoch  t  is  given  by 


r  = 


/-cos  6  cos  q 
rcos  S  sin  a 
rsin6 


(3.23-1) 


where  a  and  6  are  the  catalog  right  ascension  and  declination,  and  r  is  the  barycen- 
tric  distance  to  the  star  in  AU,  which  can  be  computed  from 


;•  =  1  /  sin  p, 


(3.23-2) 


where  p  is  the  parallax  of  the  star.  If  p  is  unknown,  unavailable,  or  zero  to  within 
the  accuracy  of  measurement,  set  it  to  some  small  but  finite  positive  number  in 
order  to  avoid  mathematical  indeterminacy;  a  choice  of  1"  x  10-7  will  effectively 
place  objects  of  unknown  parallax  at  a  radius  of  lOMpc. 

The  space  motion  vector  r  can  be  obtained  by  differentiating  Equation  3.23-1, 
giving 


—  cos  6  sin  a 

—  sin  S  cos  a 

cos  6  cos  a ' 

1 5srpa 

r  - 

cos  6  cos  a 

—  sin  S  sin  a 

cos  8  sin  a 

sr/is 

0 

cos  S 

sin  S 

kr 

(3.23-3) 


where  pa  and  pf,  are  the  proper  motions  in  right  ascension  and  declination,  respec- 
tively, and  r  is  the  radial  velocity.  The  factors  \5s,  s,  and  k  convert  fia,  ps,  and  r 
into  the  required  units  for  the  space  motion  vector,  assuming  that  pa  is  in  units 
of  time.  If  r  is  required  in  AU  per  day,  and  ^a  and  p&  are  in  seconds  of  time  and 


1 22  EXPLANATORY  SUPPLEMENT 

seconds  of  arc  per  Julian  century,  respectively,  and  r  is  in  kilometers  per  second, 
then 


s  =  271"/  (360  x  3600  x  36525)    converts  from  arcseconds/cy  to  radians/day, 
k  =  86400/ (1.49597870  x  10+8)    converts  from  km/s  to  AU/day.  (3.23-4) 

All  catalogs  do  not  necessarily  give  the  proper  motions  as  rates  per  century;  some- 
times they  are  per  year. 

It  is  worth  considering  the  cases  in  which  the  available  data  are  incomplete.  The 
radial  velocity  is  required  only  for  relatively  nearby  stars  for  which  foreshortening 
effects  (second-order  changes  in  the  apparent  motion  of  the  star  due  to  the  shifting 
aspect  of  its  motion)  are  significant.  However,  the  radial  velocity  is  useless  in  this 
regard  (and  should  be  set  to  zero),  if  the  parallax  (distance)  is  unknown.  If  the  star's 
radial  velocity  is  zero  or  unknown,  or  has  been  set  to  zero  because  the  parallax  is 
not  known,  then  the  above  space  motion  is  tangent  to  the  celestial  sphere  at  the 
star's  catalog  position  r.  Conversely,  if  the  proper  motion  components  are  zero, 
then  the  star  has  no  known  tangential  velocity.  Also,  it  may  be  that  the  proper 
motion  components  are  known  but  not  the  parallax.  In  such  a  case,  if  a  "reasonable 
guess"  parallax  value  is  not  used,  then  the  computed  velocity  components  could  be 
greater  than  seems  physically  plausible.  However,  this  is  a  computational  curiosity 
with  no  physical  meaning  or  practical  effect  on  the  results  of  the  calculation. 

The  position  T\  of  the  star  at  epoch  tj  is  calculated  from 

r,  =r  +  (f,  -/)r,  (3.23-5) 

where  t\  -  t  is  the  interval  between  the  required  epoch  and  the  epoch  of  the  catalog. 
If  r  is  in  AU/day  then  clearly  (/]  -t)  must  be  in  days.  Use  of  the  space  motion  vector 
(Equation  3.23-3)  includes  both  proper  motion  and  foreshortening  effects  in  t\. 

The  errors  that  are  being  made  in  this  method  of  calculating  space  motion  have 
been  investigated  by  Stumpff  (1985).  Basically,  proper  motion  and  radial  velocity 
are  observables  that  should  be  converted  to  inertial  quantities.  Thus  catalog  proper 
motions  include  the  effect  of  aberration,  whereas  radial  velocities  include  a  rela- 
tivists Doppler  effect.  Fortunately,  these  effects  are  very  small  and  are  important 
for  only  a  few  nearby  stars  whose  apparent  motions  are  changing  rapidly  across 
the  line  of  sight.  Stumpff  has  shown  that  the  errors  in  neglecting  these  effects  can 
increase  progressively  with  time,  so  that  after  several  decades  they  may  become 
significant  at  the  mas  level. 

There  is  no  explicit  correction  for  light-time  in  stellar  apparent  place  compu- 
tation; it  is  assumed  that  the  position  and  space  motion  vectors  implicitly  include 
the  light-time  and  its  time  derivative. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


123 


A  linear  approximation  to  a  star's  motion  in  space,  which  ignores  the  changes 
in  proper  motion  due  to  the  changes  in  right  ascension  and  declination,  and  ignores 
foreshortening  and  radial  velocity,  may  be  made  when  the  highest  accuracy  is  not 
needed,  or  if  the  time  interval  (r)  is  small  such  as  in  the  day-numbers  method 
(Section  3.34)  when  r  is  a  fraction  of  a  year.  Corrections  are  made  directly  to  the 
right  ascension  and  declination,  via 

ai=a  +  Tfj,a,       6l=6  +  Tns,  (3.23-6) 
where  r  —  ti  —  t  is  expressed  in  the  appropriate  units. 


3.24  Parallax 

Parallax  is  the  term  used  to  describe  the  difference  in  the  apparent  direction  of 
an  object  as  seen  from  two  different  locations.  For  example,  the  Sun,  Moon,  and 
planets  are  observed  from  the  surface  of  the  Earth,  and  most  almanacs  publish  their 
geocentric  positions.  The  term  is  usually  used  in  connection  with  a  shift  of  origin 
from  the  center  of  the  Earth  to  the  surface  (diurnal  parallax),  or  a  shift  from  the 
barycenter  or  heliocenter  to  the  geocenter  (annual  parallax). 

The  following  is  a  simple  and  rigorous  method  of  making  corrections  for  both 
diurnal  and  annual  parallax,  and  it  is  recommended  that  it  be  used  in  preference  to 
approximate  methods.  The  position  vector  of  a  body  rg,  with  respect  to  the  origin 
E,  is  given  by 

rE  =  uB  -  Eb,  (3.24-1) 

where  Eb  and  Ub  are  the  position  vectors  of  the  new  origin  and  the  body,  respec- 
tively, with  respect  to  the  old  origin  and  referred  to  the  same  reference  frame. 

Approximate  methods  are  given  for  calculating  diurnal  and  annual  parallax 
that  are  useful  when  the  appropriate  data  are  not  available;  e.g.,  the  distance  of 
the  body  is  not  known. 


3.241  Diurnal  Parallax  Diurnal  parallax  is  a  shift  of  origin  from  the  center  of 
the  Earth  to  the  surface  of  the  Earth.  Coordinates  with  an  origin  at  the  surface 
of  the  Earth  are  called  topocentric  coordinates,  and  depend  on  the  position  of  the 
observer.  Using  Equation  3.24-1,  the  topocentric  rectangular  equatorial  coordinates 
of  a  body  r'  an1  given  by 


EXPLANATORY  SUPPLEMENT 

r'  =  r  -  g(f); 

X  =r!  cos  8'  cos  a'  =  rcos6cosa  -  p  cos  9/ cos  (6  +  A), 
/  =  r' cos  6' sin  q'  =rcos<5sina  -  pcos<f>'  sin  (0  + A), 
z'  =  r'sin6'  =  /-sin<5  -psin^', 

(3.241-1) 

where  r  and  g(f)  are  the  geocentric  position  vectors  of  the  body  and  the  observer, 
respectively,  referred  to  the  same  reference  frame,  and 

r/2=x'2+y'2+z'\    a'  =  tan-'(//A    $  *S&rV//).  (3.241-2) 

The  geocentric  position  of  the  observer  is  given  here  in  terms  of  p,  the  distance 
of  the  observer  from  the  center  of  the  Earth,  the  geocentric  latitude  0,  the  longitude 
A  (east  longitudes  are  positive),  and  the  Greenwich  sidereal  time  9.  If  the  position 
of  the  body  is  referred  to  the  true  equinox  of  date,  then  apparent  sidereal  time 
must  be  used.  Section  3.244  gives  the  formulas  for  the  position  of  the  observer  in 
an  Earth-fixed  reference  frame. 

The  topocentric  hour  angle  {h')  may  be  calculated  from  h'  =  0  +  A  -  a\  where 
apparent  or  mean  sidereal  time  is  used  as  appropriate,  and  9  and  a'  are  expressed 
in  the  same  units.  At  upper  meridian  transit  ti  =  0. 


124 


i.e. 


3.242  Approximate  Diurnal  Parallax  Approximations  to  Equation  3.241-1  may 
be  made  in  various  ways.  For  objects  relatively  close  to  the  Earth,  such  as  the 
Moon,  whose  parallax  is  significant,  it  can  be  assumed  that  the  Earth  is  spherical 
by  setting  p  =  1  Earth  radii.  For  the  more  distant  bodies,  such  as  the  Sun  the 
planets,  or  comets,  whose  parallax  amounts  to  only  a  few  seconds  of  arc,  it  can 
be  assumed  that  the  geocentric  and  topocentric  distance  are  equal;  i  e  r*  =  r 
Inus  for  such  bodies  the  topocentric  right  ascension  and  declination  (a',V)  may 
be  approximated  using  the  geocentric  position  (a,  6)  to  sufficient  accuracy  by  the 
hrst-order  approximation 

a'  ~  a  -  7T  -  cos  4>'  sin  h  sec  8, 
a 

6>  =  6  ~  *  ^(sin  4>'  cos  8  -  cos  <}>'  cos  h  sin  8),  (3.242- 1 ) 

where  jr  is  the  equatorial  horizontal  parallax,  a  the  equatorial  radius  of  the  Earth 
P  the  geocentric  distance  of  the  observer,  and  h  the  geocentric  hour  angle. 
The  solar  parallax  is  given  by 


sin  7tq  =  a  I A    and    tt0  =  8"794 1 48. 


(3.242-2) 


3  /  CELESTIAL  REFERENCE  SYSTEMS  -[  25 

where  a  and  A  (the  unit  dist  ance)  are  defined  by  the  IAU  (1976)  system  of  constants. 

The  equatorial  horizontal  parallax  (horizontal  parallax)  of  any  object  may  be 
calculated  from 

t^-kqIA  (3.242-3) 

where  A  is  the  geocentric  distance  of  the  object  in  AU.  In  preliminary  work  on 
comets  and  minor  planets,  where  the  geocentric  distance  is  unknown,  it  is  convenient 
to  calculate  parallax  factors  pa  and  pf,  for  each  observation;  these  may  be  used,  once 
the  geocentric  distances  are  determined,  to  give  the  parallax  corrections  in  the  form 

Aa=paI  A,       AS  =  ps  J  A,  (3.242^1) 

where  Act =  a  -  a'  and  A<5  =  8  -  8'.  The  parallax  factors  are  calculated  from 

p»  -  8!'794148p  cos  <?!>' sin  ft  sec  <5  =  0!5862765  p  cos  <f>'  sin  h  sec  8 , 

ps  =  8"794 1 48  p  (sin  <p'  cos  8  -  cos  <j>'  cos  h  sin  8),  (3.242-5) 

where  p  is  expressed  in  AU. 

The  parallax  correction  for  altitude,  called  parallax  in  altitude,  is  given  approxi- 
mately by  7r  cos  a',  where  a'  is  the  topocentric  altitude:  it  is  added  to  the  topocentric 
altitude  to  form  the  geocentric  altitude  to  low  precision  (about  O'.l);  there  is  no  cor- 
rection for  azimuth  (Z).  This  approximation  does  not  allow  for  the  oblateness  of 
the  Earth,  which,  for  the  Moon,  can  produce  an  error  of  up  to  0'.2.  For  an  observer 
at  latitude  </>  the  oblateness  of  the  Earth  can  be  corrected  for  by  adding  the  next 
term  of  the  expansion,  which  is  -7r/sin2  <?icosa'  +  7r/sin  2<£cosZsina',  where  /  is 
the  flattening  (see  Section  3.244). 

3.243    Approximate  Annual  Parallax    The  reduction  for  annual  parallax  from  the 
bary-centric  place  (a,  6)  to  the  geocentric  place  (au  8t)  is  given  by 

cti  =  q  +  n(Xsin  a  -  Ycosa)/  (15cos<5), 

<5i  =  8  +  7r(Xcosasin6  +  Ksinasin<5  -  Zcos<5),  (3.243-1) 

where  it  is  the  parallax  in  arcsec,  X,  Y,  Z  are  the  barycentric  coordinates  of  the 
Earth  in  AU,  and  the  right  ascension  is  expressed  in  units  of  time. 

These  expressions  may  be  simplified  by  using  the  star  constants  c,  d,  c' ,  d'  (see 
Section  3.342)  incorporated  into  the  day-number  method  (Section  3.341)  in  order 
to  correct  for  annual  parallax.  Thus 


ot\  —  q  =  A  a  =  ir(dX  -  cY), 


126 


EXPLANATORY  SUPPLEMENT 

Si  -  i =,A5  #»  w(d'X  -  c'Y),  (3.243-2) 


where  Act  and  AS  are  in  the  same  units  as  w.  Also,  they  may  be  combined  with 
the  correction  for  annual  aberration  (see  The  Astronomical  Almanac,  B22). 

The  times  of  reception  of  periodic  phenomena,  such  as  pulsar  signals,  may  be 
reduced  to  a  common  origin  at  the  barycenter  by  adding  the  light- time  correspond- 
ing to  the  component  of  the  Earth's  position  vector  along  the  direction  of  the  object, 
that  is,  by  adding  to  the  observed  times  (X cos  a  cos  6+Fsinttcos6+Zsin<5)/c,  where 
c  =  173. 14  AU/day,  and  the  light-time  for  1  AU  is  1  /  c  =  0?0057755. 

3.244  Terrestrial  Coordinates  There  are  three  commonly  used  ways  of  express- 
ing terrestrial  coordinates  (i.e.,  Earth-fixed):  (i)  geocentric  equatorial  rectangular 
coordinates,  x,  y,  z;  (ii)  geocentric  longitude,  latitude,  and  distance,  A,  0',  p;  (iii) 
geodetic  longitude,  latitude,  and  height;  A,  <j>,  h.  Geodetic  coordinates  are  referred 
to  a  reference  spheroid  (an  ellipse  of  revolution),  which  is  normally  geocentric,  and 
is  defined  by  its  equatorial  radius  (a)  and  flattening  (/).  For  example,  those  of 
MERIT  (1983)  are 

a  =  6378. 137  km       and       /=  1/298.257.  (3.244-1) 

The  geodetic  and  geocentric  longitudes  of  a  point  are  the  same.  The  following 
relationships  hold  between  the  geocentric  and  geodetic  (geographic)  coordinates: 

x  =  p  cos  4>'  cos  A  =  (aC  +  /z)cos0cosA, 

y  =  pcos0'sinA  =  (aC  +  h)  cos  0  sin  A,  (3.244-2) 
z  =  psmcf>'  =  (aS  +  h)  sin  <t>, 

where  a  is  the  equatorial  radius  of  the  spheroid,  and  C  and  S  are  auxiliary  functions 
that  depend  on  the  geodetic  latitude  and  the  flattening  /  of  the  reference  spheroid. 
It  follows  from  the  properties  of  the  ellipse  that 

C  =  (cos2  0  +  (1  -  ff  sin2  <pym,       S=(l-  ffC.  (3.244-3) 

Geocentric  coordinates  may  be  calculated  directly  from  geodetic  coordinates 
and  conversely.  It  is  easier  to  use  an  iterative  procedure  for  the  inverse  calculation 
(see  Section  4.2.2).  Series  expansions,  which  contain  terms  up  to  /3,  for  5,  C,  p,  and 
4>  —  4>'  are 


3  /  GELESTIAL  REFERENCE  SYSTEMS  1 27 

+  (^/2-|/3)cos4^-^/3cos60) 

C=l  +  -f+-f  +  -f-(-f+-f  +  -f)  cos20 
2J     16J     32J       \2J     V      64J  J 

+  (J^f  +  ^/3)  cos  40  -        cos  60, 

\  -(^  +  |/3)cos4^  +  H/3cos60, 

0  _  4,'  =  (  /  +  l-f^j  sin  20  -  Q/2  +  ^/3)  sin40  +       sin  60.  (3.244-4) 

The  expressions  for  p  and  4>  -  4>'  are  f°r  points  on  the  spheroid  (h  =  0),  and  the 
latter  quantity  is  sometimes  known  as  the  "reduction  in  latitude"  or  "the  angle  of 
the  vertical,"  and  it  is  of  order  10' in  midlatitudes.  To  a  first  approximation  when 
h  is  smaU,  the  geocentric  radius  is  increased  by  hi  a  and  the  angle  of  the  vertical  is 
unchanged.  The  height  h  refers  to  a  height  above  the  reference  spheroid  and  differs 
from  the  height  above  mean  sea  level  (i.e.,  above  the  geoid)  by  the  "undulation  of 
the  geoid"  at  the  point. 


3.25  Aberration 

The  velocity  of  light  is  finite,  and  so  the  apparent  direction  of  a  moving  celestial 
object  from  a  moving  observer  is  not  the  same  as  the  geometric  direction  of  the 
object  from  the  observer  at  the  same  instant.  This  displacement  of  the  apparent 
position  from  the  geometric  position  may  be  attributed  in  part  to  the  motion  of 
the  object,  and  in  part  to  the  motion  of  the  observer,  these  motions  being  referred 
to  an  inertial  frame  of  reference.  The  former  part,  independent  of  the  motion  of  the 
observer,  may  be  considered  to  be  a  correction  for  light-time;  the  latter  part,  inde- 
pendent of  the  motion  or  distance  of  the  object,  is  referred  to  as  stellar  aberration, 
since  for  the  stars  the  normal  practice  is  to  ignore  the  correction  for  light-time.  The 
sum  of  the  two  parts  is  called  planetary  aberration,  since  it  is  applicable  to  planets 
and  other  members  of  the  solar  system. 

3.251  Light-Time  In  Figure  3.251.1  £  is  a  stationary  observer  at  time  /,  and  P 
is  the  position  of  a  celestial  object  also  at  time  f.  The  dotted  curve  represents  the 
orbit  of  P.  The  light  which  is  received  at  E  at  time  /  was  emitted  by  the  celestial 
object  when  it  was  at  P'  at  time  (f  -  r),  where  r  is  the  light-time;  i.e.,  the  time 


128 


EXPLANATORY  SUPPLEMENT 


£(0  A  E  V  B 

Figure  3.251.1  Figure  3.252. 1 

Light-time  aberration  Stellar  aberration 


taken  for  the  light  to  travel  from  P'  to  E.  The  direction  EP'  is  called  the  geometric 
direction  of  the  object  allowing  for  light-time. 

Light-time  is  calculated  iteratively,  with  a  first  approximation  r,  calculated 
from  the  geometric  distance  between  the  object  and  the  observer  at  time  r,  and 
the  next  approximation  calculated  from  the  distance  between  P'  at  (/  —  T[ )  and 
the  observer  at  time  t.  No  allowance  has  been  made  here  for  the  relativistic  delay 
caused  by  the  Sun's  gravitational  field.  However,  the  apparent-place  algorithm  given 
in  Section  3.31  (3.315)  includes  this  effect,  which  is  of  the  order  of  1  microarcsecond. 

3.252  Stellar  Aberration  In  general,  the  observer  at  E  will  be  moving  with  a  ve- 
locity V.  The  apparent  change  in  the  geometric  direction  of  the  celestial  object  at 
P'  due  to  the  orbital  motion  of  the  Earth  about  the  barycenter  is  called  stellar 
aberration.  In  Figure  3.252.1,  p  is  a  unit  vector  in  the  geometric  direction  EP', 
i.e.,  in  the  direction  of  the  body  at  time  t  allowing  for  light-time  (but  ignoring  the 
effect  of  light  deflection).  The  observer  is  moving  with  a  velocity  V  relative  to  the 
stationary  frame,  and  at  time  t  will  observe  the  body  at  P"  in  the  direction  pi, 
where  P'EB  -  9  is  the  angle  between  the  direction  of  motion  and  p  in  the  stationary 
frame,  and  P'EP"  -  A9  is  the  displacement  due  to  aberration  in  the  moving  frame, 
which  is  always  toward  the  direction  of  motion. 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 29 

The  classical  Newtonian  expression  for  the  direction  of  the  source  as  seen  by 
the  moving  observer  is  obtained  by  vector  addition  of  velocities  as  follows: 

Taking  the  scalar  part  of  the  vector  cross  product  of  p  with  Equation  3.252-1,  then 

(V/c)sin0  V  .  .     1  fV\2  .  _ 

sinA6>=-^   r  =  -sm fl--(-j  sin20  +  -, 


v/(l  +  2(V/r)  +  (V/c)2)  c 
since    |p  a  p,  =  sin  AO,     |pAp|=0,  and 


=  —  sin  (9.  (3.252-2) 
c 


The  term  of  order  Vic  is  about  0.0001  or  20";  the  term  (Vic)1  has  a  maximum 
value  of  about  O'.'OOl. 

In  special  relativity,  the  velocity  of  light  is  constant  in  the  moving  and  station- 
ary frame,  and  the  Lorentz  formula  for  the  addition  of  velocities  applies.  Hence 

_  3-'p  +  (V / c)  +  (p-V / c)(V / c)/(l  +  ft-')  (3.252-3) 
Pl  1+p-V/c 


where  /?"'  =  y/l  -  (Vic)2,  again  taking  the  modulus  of  the  vector  cross  products 
of  Equation  3.252-3  with  p,  then 

(VI  c)  sin  6  +  \(V  I  c)2  sin  20  /  (1  +  p~l) 

sin  Ad  =  .  2  

1  +(V/c)cos0 

=  -sm6--(-)  sin20+-.  (3.252^) 
c  4  \  c  / 

which  shows  that  special-relativistic  aberration  and  classical  Newtonian  aberration 
agree  to  order  Vic  (mas  precision).  However,  it  is  recommended  that  special- 
relativistic  aberration  (Equation  3.252-3)  be  used,  particularly  when  high  precision 
is  required  (see  also  apparent- place  algorithm,  Sections  3.315  and  3.317). 

The  motion  of  an  observer  on  the  Earth  is  the  resultant  of  diurnal  rotation  of 
the  Earth,  the  orbital  motion  of  the  Earth  about  the  center  of  mass  of  the  solar 
system,  and  the  motion  of  this  center  of  mass  in  space.  The  stellar  aberration  is 
therefore  made  up  of  three  components,  which  are  referred  to  as  diurnal  aberration, 
annual  aberration,  and  secular  aberration.  The  stars  and  the  center  of  mass  of  the 
solar  system  may  each  be  considered  to  be  in  uniform  rectilinear  motion;  in  this 
case  the  correction  for  light-time  and  the  secular  aberration  are  indistinguishable, 
and  the  aberrational  displacement  due  to  the  relative  motion  is  merely  equal  to  the 
proper  motion  of  the  star  multiplied  by  the  light-time;  it  is  constant  for  each  star, 


1  30  EXPLANATORY  SUPPLEMENT 

and  in  general,  is  not  known,  and  is  therefore  ignored  (see  Section  3.23  on  space 
motion  for  further  discussion).  The  term  "stellar  aberration"  is  sometimes  loosely 
used  in  contexts  where  "annual  aberration"  should  strictly  be  used. 


3.253  Classical  Annual  Aberration  In  accordance  with  recommendations  of  the 
International  Astronomical  Union  (1952)  the  annual  aberration  is  calculated  as 
from  1960  from  the  actual  motion  of  the  Earth,  referred  to  an  inertial  frame  of 
reference  and  to  the  center  of  mass  of  the  solar  system.  The  resulting  aberrational 
displacement  AO  may  be  resolved  into  corrections  to  the  directional  coordinates  by 
standard  methods.  If,  for  example  X,  Y,  and  Z  are  the  components  of  the  Earth's 
velocity  parallel  to  equatorial  rectangular  axes,  the  corrections  to  right  ascension 
and  declination,  referred  to  the  same  equator  and  equinox,  in  the  sense  "apparent 
place  minus  mean  place"  are,  to  second  order  in  Vic, 

X  Y 

cos  6  Aa  =  sin  q  +  -  cos  a 

c  c 

1       .  ^  .  M*i 

+  -^(Xsino.  -  Kcosq)(Xcos  a  +  Ysin  a)  sec  6  + 

tr 

X  Y  Z 

A6  =  —  cos  a  sin  6  sin  a  sin  6  +  -  cos  6 

c  c  c 

1   .         •        ,    '  ■ 

 r-(^sina  —  Y  cos  a)  tan  6 

2cl 

+  —  (Xcqs  8  cos  a  +  YcosS  sin  a  +  Zsin  8) 


x  (Xsin  6  cos  a  +  Ysin  6  sin  a  —  Zcos  6)  +  ■■■ .     (3.253-1 ) 


These  equations  are  usually  used  to  first  order  in  (Vic),  and  ignoring  the  Z  term  are 
expressed  in  terms  of  the  Besselian  day  numbers  C  and  D  (Section  3.342),  which 
represent  the  classical  annual  aberration  terms.  An  account  of  how  C,  D,  and  the 
E-terms  of  aberration  have  been  calculated  in  the  past  is  given  in  Section  3.53. 
Atkinson  (1972)  gives  a  useful  algorithm  using  a  truncated  series  for  calculating  C 
and  D  to  0'.'001. 

To  a  lower  precision  it  is  possible  to  use  the  expressions 


X  =  +0.0172  sin  A,    Y  =  -0.0158  cos  A,    Z  =  -0. 0068  cos  A  (3.253-2) 

for  the  barycentric  velocity  of  the  Earth  with  respect  to  the  mean  equator  and 
equinox  of  J2000.0,  where  A  is  the  apparent  longitude  of  the  Sun. 

Also  to  first  order  in  VI  c,  we  obtain  for  the  aberration  in  right  ascension  and 
declination  due  to  the  unperturbed  elliptic  component  of  the  orbital  motion  of 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


131 


the  Earth  with  respect  to  the  Sun,  obtained  as  a  correction  to  be  applied  to  the 
geometric  place  a,  6  in  order  to  obtain  the  apparent  place  a(,  6,: 


ct\  —  a  = 


6  = 


—(k  sin  ©  +  Ke  sin  77)  sin  a  sec  6 

—  (k  cos  0  cos  e  +  Ke  cos  II  cos  e)  cos  a  sec  6  (3.253-3) 
— (k  sin  Q  +  Ke  sin  II)  cos  a  sin  6 

-  (  k  cos  0  cos  e  +  Ke  cos  II  cos  e)(tane  cos  6  -  sinasin<5), 


where  ©  is  the  true  geometric  longitude  of  the  Sun,  e  and  77  are  the  eccentricity 
and  longitude  of  perigee  of  the  solar  orbit,  e  is  the  mean  obliquity  of  the  ecliptic 
and  k  is  the  constant  of  aberration  (see  Equation  3.253-4).  The  second  term  in  each 
factor  in  Equation  3.253-3  depends  explicitly  on  the  eccentricity  and  represents  the 
components  of  the  displacement  due  to  the  departure  of  the  elliptic  orbital  motion 
from  a  circle.  The  component  of  the  aberration  that  depends  on  e  is  known  as 
elliptic  aberration. 

The  constant  of  aberration  k  is  the  ratio  of  the  mean  orbital  speed  of  the  Earth 
to  the  speed  of  light,  where  perturbations  and  the  motion  of  the  Sun  relative  to  the 
barycenter  are  neglected.  It  is  derived  from 


K  =  nal  (cv  1  -  e2), 


(3.253-4) 


where  c  is  the  speed  of  light,  a  is  the  mean  distance  of  the  Earth  from  the  Sun,  n 
is  the  mean  motion,  and  e  is  the  eccentricity  of  the  orbit. 

The  annual  aberration  due  to  the  barycentric  motion  of  the  Sun  or  to  the  action 
of  any  particular  planet  may  be  obtained,  when  the  ecliptic  latitude  of  the  planet 
is  neglected,  from 

nma ,  .      .  , 
«i  —  a  =  (sin  q  sin  /  +  cos  e  cos  a  cos  /)  sec  6, 

c 

£      c  nma 

d\  -o-  —  (cos  a  sin  6  sin  /  +  cos  /(sin  c  cos  6  -cose  sin  a  sin  <5)),  (3.253-5) 

where  /  is  the  heliocentric  ecliptic  longitude  of  the  planet,  m  is  the  ratio  of  mass  of 
the  planet  to  Sun,  a  is  the  mean  distance,  and  n  is  the  mean  motion.  The  coefficients 
to  be  used  are  given  in  Table  3.253.1.  The  Sun's  aberration  in  longitude,  assuming 
unperturbed  elliptical  motion,  can  be  given  as 


AA  =  -ft  sec /?(l+e  cos  v)  =  na(l  -  e1)  I R, 


(3.253-6) 


where  k  is  the  constant  of  aberration;  a,  e,  and  v  are  the  semi-major  axis,  eccen- 
tricity, and  true  anomaly  of  the  Earth's  orbit;  and  f3  and  R  are  the  Sun's  latitude 


132 


EXPLANATORY  SUPPLEMENT 


Table  3.253.1 

Coefficients  (nma  /  c)  for  the 
Major  Planets 


Venus 

CT0001 

Earth 

craooi 

Jupiter 

rroo86 

Saturn 

o:'ooi9 

Uranus 

o:'ooo2 

Neptune 

0:0002 

and  true  radius  vector.  The  e2  term  affects  only  the  fifth  significant  figure;  so  until 
the  constant  of  aberration  was  specified  to  five  significant  figures  and  the  longitude 
of  the  Sun  was  given  to  three  decimal  figures,  this  term  was  ignored. 

Measurements  of  radial  velocity  may  be  reduced  to  a  common  origin  at  the 
barycenter  by  adding  the  component  of  the  Earth's  velocity  in  the  direction  of  the 
object,  that  is,  by  adding 

Xcosacos<5  +  7  sin  a  cos  <5  +  Zsin  6.  (3.253-7) 

3.254  Diurnal  Aberration  The  rotation  of  the  Earth  on  its  axis  carries  the  ob- 
server toward  the  east  with  a  velocity  up  cos  0',  where  w  is  the  equatorial  angular 
velocity  of  the  Earth  (the  standard  value  of  u  is  given  in  Section  3.353;  if  a  is  the 
equatorial  radius,  then  au>  =  0. 464  km/s  is  the  equatorial  rotational  velocity  of  the 
surface  of  the  Earth) ,  and  p  and  8X6  the  geocentric  distance  and  latitude  of  the 
observer,  respectively.  The  corresponding  constant  of  diurnal  aberration  is 

—  -  cos  4>'  =  0'.'3200  -  cos     =  0!02133  -  cos  <f>' .  (3.254-1) 
c  a  a  a 

The  aberrational  displacement  may  be  resolved  into  corrections  (apparent  -  mean) 
in  right  ascension  and  declination: 

Aa  =  0'02133  -  cos  <f>'  cos  h  sec  6, 
a 

AS  =  0:'3200  -  cos  4>'  sin  h  sin  6,  (3.254-2) 
a 

where  h  is  the  hour  angle.  The  effect  is  small  but  is  of  importance  in  meridian 
observations.  For  a  star  at  transit,  h  =  0°  or  180°,  so  AS  is  zero,  but 


Aq  =  ±0!02 1 33  -  cos  <j>'  sec  S, 
a 


(3.254-3) 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


133 


where  the  plus  and  minus  signs  are  used  for  upper  and  lower  transits,  respectively; 
this  may  be  regarded  as  a  correction  to  the  time  of  transit. 

Alternatively,  the  effect  may  be  computed  in  rectangular  coordinates  using 
the  following  expression  for  the  geocentric  velocity  (r)  vector  of  the  observer  with 
respect  to  the  celestial  equatorial  reference  frame  of  date: 


r  = 


-up  cos  4>'  sin(#  +  A) 
up  cos  <j>'  cos(0  +  A) 
0 


(3.254-4) 


where  8  is  the  Greenwich  sidereal  time  (mean  or  apparent  as  appropriate),  and  A 
is  the  longitude  (east  longitudes  are  positive). 

The  geocentric  velocity  vector  of  the  observer  is  added  to  the  barycentric  veloc- 
ity of  the  Earth's  center,  to  obtain  the  corresponding  barycentric  velocity  vectors 
of  the  observer  (see  Section  3.353). 

3.255  Planetary  Aberration  Planetary  aberration  is  the  apparent  displacement  of 
the  observed  position  of  a  celestial  body  produced  by  both  the  motion  of  the  body 
and  the  motion  of  the  Earth.  It  is  often  calculated  by  adding  the  correction  for 
stellar  aberration  (Section  3.252)  to  the  geometric  position  corrected  for  light-time 
(Section  3.251).  On  the  other  hand  it  may  be  calculated  directly,  either  by  using 
the  barycentric  positions  of  the  body  and  the  Earth  at  time  (?  -  t),  or  by  using  the 
barycentric  positions  and  velocities  of  the  body  and  the  Earth  at  time  t  as  described 
below.  However,  although  these  latter  two  methods  are  simple  and  widely  used,  the 
first  method  may  be  preferred,  since  it  brings  out  the  principle  that  aberration 
depends  upon  the  relative  velocity  of  observer  and  object. 

If  we  denote  the  barycentric  position  of  the  Earth  at  time  /  by  EB(r)  and  the 
barycentric  position  of  the  planet  at  time  t  by  uB(t),  then  the  geometric  geocentric 
position  of  the  planet  at  time  t  allowing  for  light-time  is  given  by 


P(r)  =  uB(f  -  r)  -  EB(f). 


(3.255-1) 


where  r  =  P  I  c  is  the  light-time  and  P  =  |P|.  If  Pi  is  the  geocentric  position  of 
the  planet  allowing  for  planetary  aberration,  then  using  classical  stellar  aberration 
(Equation  3.252-1) 

P,=P  +  tEb.  (3.255-2) 

If  we  assume  that  the  velocity  of  the  Earth  EB  and  the  velocity  of  the  planet  uB 
are  constant  during  the  light-time,  then  Equation  3.255-1  may  be  written  as 


P,  =  uB(r  -  r)  -  EB(f  -  t), 


(3.255-3) 


or 


134 


EXPLANATORY  SUPPLEMENT 

Pi  =  Mf)  -  EB(f)  -  r(iiB  -  EB).  (3.255-4) 


Since  Newtonian  aberration  and  special-relativity  aberration  agree  to  order  Vfc,  it 
is  only  when  mas  precision  is  required  that  it  becomes  necessary  to  use  a  rigorous 
formula  (see  Section  3.252). 

3.256    Differential  Annual  Aberration    The  differential  coordinates  of  a  moving  ob- 
ject with  respect  to  a  fixed  star  will  be  affected  by  differential  aberration;  if  Aa, 
A6  are  the  observed  differences  of  the  coordinates  in  the  sense  moving  object  minus 
star,  then  the  corrections  for  differential  annual  aberration  are 

A(e*i  —  q)  =  (Dcosq  -  C  sin  a)  sec  6Aa  +  (Dsino  +  Ccosa)sec<5  tan  6A6, 
A(6]  -  b)  =  -(Z5  sin  a  +  Ccos  a)  sin  SAa  +  (D  cos  a  -  Csin  a)  cos  6  AS 

-  Ctan  e0  sin  6 AS,  (3.256-1 ) 

where  C  and  D  are  the  aberration  day  numbers  defined  in  Section  3.342,  and  the 
units  of  each  term  are  consistent.  The  corrections  should  be  applied  with  those 
for  differential  precession  and  nutation  to  give  mean  positions  referred  to  the  same 
equator  and  equinox  as  those  of  the  stars. 

Alternatively  the  corrections  for  differential  annual  aberration  to  be  added  to 
the  observed  differences  (in  the  sense  moving  object  minus  star)  of  right  ascension 
and  declination  to  give  true  differences  are 

in  right  ascension    aAa  +  bA6    in  units  of  0?001 

in  declination         cAa  +  dAS    in  units  of  O'.'Ol  (3.256-2) 

where  Aa,  A6  are  the  observed  differences  in  units  of  lm  and  1'  respectively,  and 
where  a,  b,  c,  d  are  coefficients  defined  by 

a  -  -5.  701  cos(H  +  a)  sec  6, 
b  -  -0. 380  sin(//  +  a)  sec  6  tan  6, 
c  =  +8. 552  sin(tf  +  a)  sin  <5, 
d  =  -0. 570cos(//  +  a)  cos  6, 
fl*  =  23.4-  (day  of  year  /  15. 2).  (3.256-3) 

3.257  Differential  Planetary  Aberration  Aberration,  because  of  its  dependence  on 
the  relative  motions  and  distances,  sometimes  has  complex  effects  where  two  or 
more  bodies  are  involved,  as,  e.g.,  in  eclipses,  transits,  and  the  phenomena  of  satel- 
lite systems;  and  on  some  past  occasions,  the  determination  of  these  effects  has 
presented  an  intricate  problem. 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  35 

fn  a  transit  of  a  planet  across  the  disk  of  the  Sun,  e.g.,  the  external  contacts 
occur  when  the  observer  is  on  the  conical  surface  that  circumscribes  the  Sun  and 
the  planet  and  has  its  vertex  between  the  Sun  and  the  planet.  The  internal  contact 
occur  when  the  observer  is  on  the  cone  circumscribing  the  planet  and  the  Sun 
having  its  vertex  between  the  planet  and  the  Earth.  The  observed  contacts  are  at 
the  instants  when  the  apparent  positions  of  a  point  on  the  limb  of  the  planet  and  a 
point  on  the  limb  of  the  Sun  are  the  same;  i.e.,  the  ray  of  light  from  the  Sun  that 
reaches  the  geometric  position  of  the  observer  at  the  instant  T  of  contact  has  grazed 
the  planet  on  the  way.  This  ray  left  the  Sun  at  a  previous  time  T  -  t2  and  reached 
the  planet  at  time  (T-  t2)  +  ti.  The  circumscribing  cones  are  formed  by  the  grazing 
rays;  hence,  the  points  on  the  Earth  and  the  planet  that  lie  in  the  same  straight 
line  on  one  of  the  cones  at  the  instant  of  a  contact  are  the  geometric  position  of 
the  observer  at  the  time  T,  and  the  geometric  position  of  the  point  on  the  planet  at 
time  T  -  t2  +  r, .  Therefore,  in  the  formulas  of  the  theory  of  transits,  for  any  value 
of  the  time  7",  all  quantities  depending  on  the  time  must  be  derived  from  the  values 
of  the  geometric  coordinates  (r,  /,  b)  of  the  planet  at  T  -  t2  +  T\  and  the  geometric 
coordinates       /',  b')  of  the  Earth  at  /. 

Similarly,  in  comparing  observed  positions  of  objects  in  the  solar  system  with 
one  another  or  with  reference  stars,  in  order  to  determine  the  coordinates  of  a  body, 
great  care  is  required  in  correcting  the  observations  for  aberration,  according  to  the 
means  of  observation  used,  and  the  method  of  comparison. 

In  eclipsing  binary  systems,  an  apparent  variation  of  the  period  may  be  pro- 
duced by  the  variation  in  light-time  with  changing  distance  from  the  observer  due 
to  an  orbital  motion  of  the  eclipsing  pair  with  respect  to  a  distant  third  component 
(Irwin,  1959). 


3.26   Gravitational  light  deflection 

Gravitational  light  deflection  was  predicted  by  Einstein  and  first  confirmed  photo- 
graphically at  the  eclipse  of  1919  May  by  expeditions  from  Greenwich  and  Cam- 
bridge, England  (Dyson  et  ai,  1920).  It  has  been  measured  many  times,  and  most 
recent  high-precision  measurements  have  been  made  with  radio  interferometers, 
which  can  observe  sources  very  close  to  the  Sun.  Fomalont  and  Sramek  (1975)  have 
confirmed  the  deflection  predicted  by  Einstein's  theory  with  an  accuracy  of  1%, 
which  is  an  order  of  magnitude  more  accurate  than  that  achieved  optically  from 
eclipse  observations.  The  deflection  increases  the  closer  the  light  path  is  to  the  Sun; 
at  a  heliocentric  elongation  of  90°,  however,  the  deflection  has  decreased  to  0'.'004. 

The  algorithm  for  the  deflection  of  light  is  that  of  Yallop  (1984)  as  given  in  The 
Astronomical  Almanac  1984,  which  is  an  adaptation  of  Murray's  (1981)  formulas. 
The  isotropic  metric  has  been  assumed.  Only  the  Sun's  gravitational  field  has  been 
included;  each  of  the  planets  causes  a  similar  effect  that  is  smaller  by  a  factor 
equal  to  the  ratio  of  the  planet's  mass  to  that  of  the  Sun  (1/1047  for  Jupiter).  The 


136 


EXPLANATORY  SUPPLEMENT 


S 


Figure  3.26.1 

Gravitational  light  deflection 


gravitational  field  of  the  Earth,  also  ignored  here,  can  deflect  light  by  a  few  tenths 
of  a  milliarcsecond  for  ground-based  observers.  It  may  also  have  to  be  allowed  for 
in  precise  astrometry  with  Earth  satellites. 

In  Figure  3.26.1,  S  is  the  Sun,  P  the  body  that  is  being  observed,  and  E  is  the 
Earth.  The  unit  vectors  e  and  q  represent  the  heliocentric  directions  of  the  Earth 
and  the  body,  respectively.  The  heliocentric  elongation  of  the  Earth  from  P  is  ib 
where  cos^  =  q  -  e.  The  geocentric  direction  to  the  body  P  when  the  light  left  it 
is  given  by  the  unit  vector  p.  The  dotted  arc  AEB  represents  the  light-path  as  it 
passes  the  Earth.  The  tangent  to  the  light-path  at  E  is  XEY.  As  the  light,  which 
was  emitted  at  P,  travels  along  the  path  AB,  it  is  always  deflected  toward  the  Sun. 
At  E  the  direction  between  p  and  the  tangent  to  the  light-path  is  A(j>  (as  shown  in 
the  figure).  Einstein's  general  relativity  theory  predicts  that 

.  ,     la  sint/j 

^  =  SET7^> 

where  E  is  the  distance  of  the  Earth  from  the  Sun,  (i  is  the  heliocentric  gravitational 
constant,  and  c  is  the  speed  of  light. 

The  apparent  direction  of  P  is  along  the  tangent  to  the  light  path  p, ,  and  by 
vector  addition 

(q  a  e)  a  p 

Pi  =  p  +  — —  A0,  (3.26-2) 
sin  w 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  37 

since  (q  a  e)  a  p  /  sin  fj>  is  a  unit  vector  in  the  plane  PES,  at  right  angles  to  p  and 
pointing  away  from  the  Sun.  This  equation  may  be  written  in  the  form  that  is  more 
useful  for  computation, 

Pi  =  P  +  —  KP  ■  q)e  -  (e  •  P)q]  ■  (3.26-3) 
gi 

The  dimensionless  scalar  quantities  g\  and  gi  are 

£i  =  ||    and    g2  =  l+q-e,  (3.26-4) 

where  p.  =  1.32712438  x  lO^mV2,  c  =  86400  /  TA  =  173. 144633  Au/day,  and 
TA  =  499.004782  is  the  light-time  for  1  AU  in  seconds,  based  on  the  IAU  (1976) 
system  of  constants.  The  value  of  g\  is  always  close  to  2  x  10-8,  but  gi  varies 
between  0  and  +2.  The  vector  pi  is  a  unit  vector  to  order  ale1. 

Stars  represent  the  asymptotic  case  when  p  =  q,  and  Equation  3.26-3  becomes 

e  -  (p  e)p 

P|=P  +  £'    l+pe  °26-5) 

When  one  is  applying  the  light  deflection  correction  in  the  algorithm  for  appar- 
ent places  (see  Section  3.316),  using  the  vector  EH  in  the  relativistic  deflection  com- 
putation introduces  a  minor  approximation  resulting  from  the  use  of  the  barycentric 
position  of  the  Sun  at  the  epoch  of  observation.  The  resulting  error  cannot  exceed 
0. 1  mas  in  the  worst  case  (object  observed  at  the  limb  of  the  Sun  with  barycen- 
tric motion  of  the  Sun  orthogonal  to  the  line  of  sight)  and  is  generally  much  less. 
Furthermore,  the  deflection  algorithm  itself  results  from  a  first-order  development 
that  assumes  small  deviations  of  the  photon  track  from  a  straight  line  in  Euclidian 
space;  the  error  in  neglecting  second-order  effects  can  reach  about  0.5  mas  for  an 
object  observed  at  the  Sun's  limb  (Kammeyer,  1988,  private  communication). 

Figure  3.26.2  shows  the  magnitude  of  the  deflection  of  light,  as  viewed  from  the 
Earth,  for  planets  and  stars  as  a  function  of  the  geocentric  angular  separation  of  the 
observed  body  from  the  center  of  the  Sun.  Maximum  deflection  occurs  for  bodies 
that  are  about  to  be  occulted  by  the  Sun.  Minimum  deflection  for  Mercury  and 
Venus  occurs  when  they  are  about  to  transit  the  Sun.  For  the  other  bodies,  minimum 
deflection  occurs  at  180°  elongation  from  the  Sun.  The  figure  was  produced  from 
Equation  3.26  1  assuming  circular  orbits. 

Table  3.26.1  tabulates  the  deflection  angles  A<j)  =  g\  tan(t/-'/2)  (Equation  3.26-1) 
for  various  values  of  D  =  180°  -  ip  (for  stars,  D  approximates  the  geocentric  elonga- 
tion). The  body  disappears  behind  the  Sun  when  D  is  less  than  the  limiting  grazing 
ralue  of  about  0?25. 


138 


EXPLANATORY  SUPPLEMENT 


Of  27 

45°  90°  180° 


Of  1  1°  10°  100° 

Geocentric  elongation 


Figure  3.26.2 

Light  from  the  planets  and  stars  deflected  by  the  sun 

The  table  was  produced  assuming  that  the  Earth-Sun  distance  E  =  1,  and 
thus  g\  =  01'00407.  The  variation  of  the  Earth-Sun  distance  modulates  the  value 
°f  gi  by  less  than  2%.  This  simple  form  of  the  gravitational  deflection  formula 
has  been  noted  previously  by  Shapiro  (1967)  and  by  Fukushima  (1982,  private 
communication).  In  this  form,  the  deflection  is  not  explicitly  dependent  on  the 
distance  of  the  emitting  body  from  the  Sun  or  the  Earth.  Therefore,  to  an  observer 
on  the  Earth,  the  apparent  gravitational  deflection  is  the  same  for  all  objects  that 
lie  anywhere  on  a  given  line  that  extends  radially  outward  from  the  Sun.  This  result 
holds  regardless  of  the  orientation  of  the  line  with  respect  to  the  Earth. 

The  equations  for  light  deflection  have  an  indeterminacy  for  light  paths  starting 
beyond  the  Sun  on  the  extension  of  the  Sun-Earth  line;  bodies  there  are  hidden  by 
the  Sun's  disk  and  unobservable  in  any  event.  For  these  bodies  or  the  Sun  itself, 
the  deflection  can  be  considered  to  be  zero. 

Table  3.26.1 

Apparent  Deflection  Angles 


D  0?25  0?5  1°  2°  5°  10°  20°  50°  90° 
A<t>     1V866     o:'933     0!'466     01'233     o:'093     0"047     0'.'023     0"009  0'.'004 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  39 

3.261  Approximate  Light  Deflection  for  Stars  The  increments  to  be  added  to  the 
calculated  right  ascension  and  declination  of  the  star  may  be  evaluated  approxi- 
mately from 

cos  D  =  sin  8  sin  Ss  +  cos  6  cos  <5S  cos  (a  —  as), 

Aa  =  vmo2ncos6>sin{a-ai 

(1  —  cosZ))cos<5 

A6  =  0:'00407  sin6coS4cos(a-as)-cos^in4  2f) 

1  -  cos  D  ' 

where  a,  <5,  ctS)  <5S  are  the  geocentric  right  ascensions  and  decimations  of  the  star 
and  the  Sun,  respectively.  For  stars,  D,  the  geocentric  elongation,  approximates 
1 80°  —  ip,  where  ip  is  the  heliocentric  elongation.  These  corrections  may  be  included 
with  the  day-number  reduction  for  stars  given  in  Section  3.341. 


3.27   Polar  Motion 

The  rotation  of  the  Earth  is  represented  by  a  diurnal  rotation  around  a  reference 
axis  whose  motion  with  respect  to  the  inertial  reference  frame  is  represented  by  the 
theories  of  precession  and  nutation.  The  reference  axis  does  not  coincide  with  the 
axis  of  figure  (maximum  moment  of  inertia)  of  the  Earth,  but  moves  slowly  (in  a 
terrestrial  reference  frame)  in  a  quasi- circular  path  around  it.  The  reference  axis 
is  the  Celestial  Ephemeris  Pole  (normal  to  the  true  equator),  and  its  motion  with 
respect  to  the  terrestrial  reference  frame  is  known  as  polar  motion.  The  Celestial 
Ephemeris  Pole  is  the  axis  about  which  the  diurnal  rotation  of  the  Earth  is  applied 
in  the  transformation  between  celestial  and  terrestrial  frames,  and  so  must  not  be 
confused  with  the  instantaneous  axis  of  rotation.  The  maximum  amplitude  of  the 
polar  motion  is  typically  about  0"3  (corresponding  to  a  displacement  of  about  9  m 
on  the  surface  of  the  Earth)  and  the  principal  periods  are  about  365  and  428  days. 
The  motion  is  affected  by  unpredictable  geophysical  forces,  and  is  determined  from 
observations  of  stars,  radio  sources,  the  Moon,  and  appropriate  Earth  satellites, 
using  relevant  techniques  including  VLBI  and  laser  ranging. 

The  pole  and  zero  (Greenwich)  meridian  of  the  terrestrial  reference  frame  are 
defined  implicitly  by  the  adoption  of  a  set  of  coordinates  for  the  instruments  that  are 
used  to  determine  UT  and  polar  motion  from  astronomical  observations.  (The  pole 
of  this  system  is  known  as  the  Conventional  International  Origin.)  The  position  of 
this  terrestrial  reference  frame  with  respect  to  the  true  equator  and  equinox  of  date 
is  defined  by  successive  rotations  through  two  small  angles  x,  y,  and  the  Greenwich 
apparent  sidereal  time  6.  The  angles  x  and  y  correspond  to  the  coordinates  of  the 
Celestial  Ephemeris  Pole  with  respect  to  the  terrestrial  pole  measured  along  the 
meridians  at  longitude  0°  and  270°  (90°  west).  Current  values  are  published  by  the 
International  Earth  Rotation  Service;  values  from  1970  January  1  onward  are  given 


1 40  EXPLANATORY  SUPPLEMENT 

in  section  K  of  The  Astronomical  Almanac.  An  80-year-long  series  of  values  on  a 
consistent  basis  has  been  published  by  the  International  Polar  Motion  Service.  The 
coordinates  x  and  y  are  usually  measured  in  seconds  of  arc. 

Polar  motion  causes  variations  in  the  zenith  distance  and  azimuth  of  the  Ce- 
lestial Ephemeris  Pole  and  hence  in  the  values  of  the  terrestrial  latitude  (0)  and 
longitude  (A)  that  are  determined  from  direct  astronomical  observations  of  latitude 
and  time. 

The  rigorous  transformation  of  a  vector  ro  with  respect  to  the  frame  of  the 
true  equator  and  equinox  of  date  to  the  corresponding  vector  r  with  respect  to  the 
terrestrial  frame  is  given  by  the  formula 

r  =  R2(-x)R](-y)R3(e)r0;  (3.27-1) 

conversely, 

r0  =  R3(-0)  R,(y)  R2(*)  r,  (3.27-2) 

where  Equation  3.27-1  represents  a  rotation  of  6  about  the  z-axis,  followed  by  a 
rotation  of  — y  about  the  x-axis,  and  finally  a  rotation  of  —  x  about  the  y-axis  (see 
Section  11.4).  The  vector  r  could  represent,  for  example,  the  coordinates  of  a  point 
on  the  Earth's  surface  or  of  a  satellite  in  orbit  around  the  Earth. 

Alternatively  the  transformation  can  be  expressed  as  a  variation  of  the  longi- 
tude and  latitude  of  a  point,  and  to  first  order,  the  departures  from  the  mean  values 
Am,  <j>m  (corresponding  to  vector  Tq)  are  given  by 

A<f>  =  xcos  Ara  —  y  sin  Am    and    AA  =  (jrsin  Am  +ycosAm)tan.  <j>m.  (3.27-3) 

The  variation  in  longitude  must  be  taken  into  account  in  the  determination  of 
Greenwich  mean  sidereal  time,  and  hence  of  UT,  from  observations. 


3.28  Refraction 

Atmospheric  refraction  is  included  in  the  The  Astronomical  Almanac  in  only  a  few 
topocentric  phenomena,  such  as  the  times  of  rising  and  setting  of  the  Sun  and 
Moon,  and  in  theory  in  the  predictions  of  local  circumstances  of  eclipses.  How- 
ever, for  observational  reductions  the  effect  of  refraction  must  be  included.  In  this 
section  we  give  a  low-precision  formula,  valid  at  the  horizon,  that  is  particularly 
useful  for  navigation;  a  formula  valid  for  zenith  distances  less  than  70°,  which  takes 
into  account  the  amount  of  water  vapor  in  the  atmosphere;  and  an  algorithm  for 
evaluating  the  integral  in  the  classical  formulation  using  quadrature.  This  latter 
algorithm,  which  allows  for  the  principal  change  of  refraction  due  to  variations  of 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  41 

temperature,  pressure,  and  humidity  and  even  temperature  lapse  rate,  gives  a  well- 
defined  reference  value.  Thus,  for  example,  residuals  of  the  observed  values  from 
the  reference  values  could  be  used  to  model  the  local  variation  of  refraction. 


3.281  Refraction — Numerical  Integration  In  this  section  we  give  a  precise  algo- 
rithm for  calculating  refraction  using  numerical  quadrature.  The  real  accuracy  is 
very  dependent  on  the  conditions,  particularly  for  large  zenith  distances,  and  on 
the  atmospheric  model. 

The  atmosphere  is  assumed  to  be  spherically  symmetric  and  in  hydrostatic 
equilibrium,  and  to  obey  the  perfect  gas  law  for  the  combined  mixture  of  dry  air 
and  water  vapor,  and  also  for  the  dry  air  and  water  vapor  separately.  The  two 
layers  of  the  atmosphere  are  the  troposphere  and  the  stratosphere.  The  troposphere 
extends  from  the  surface  of  the  Earth  to  the  tropopause,  which  is  assumed  to  be 
11  km  (hi)  from  the  Earth's  surface.  In  this  region  the  temperature  decreases  at  a 
constant  rate  (a  =  0. 0065°  km^  )  and  the  relative  humidity  is  constant  and  equal 
to  its  value  at  the  observer.  In  the  stratosphere  the  temperature  remains  constant 
and  equal  to  the  temperature  at  the  tropopause  (T,)  and  there  is  no  pressure  due 
to  water  vapor.  The  upper  height  (hs)  of  the  stratosphere  is  taken  as  80  km,  since 
above  this  height  refraction  becomes  negligible. 

The  total  bending  of  a  ray  is  given  by 

I  dz_  (3.281-1) 

Jo    n  +  ran  I  dr 

This  integral  is  a  transformation  of  the  usual  refraction  integral.  It  has  been  rec- 
ommended by  Auer  and  Standish  (1979)  because  it  is  more  suitable  for  numerical 
quadrature;  it  is  a  more  slowly  varying  function  over  the  whole  range  of  z  and  re- 
moves the  problem  at  z  =  90°.  However,  there  is  a  discontinuity  in  the  function 
dnl  dr  at  the  tropopause,  and  so  the  integral  is  evaluated  in  two  parts,  from  z  =  Zs 
to  Zis  in  the  stratosphere,  and  from  z  =  Zt  to  Zo  in  the  troposphere. 

The  following  procedure  gives  the  steps  required  to  calculate  the  total  refrac- 
tion, £,  i.e.,  the  sum  of  the  refraction  caused  by  the  troposphere  (£,)  and  the  strato- 
sphere (&),  from 

P  f  dz+  P  fdz  (3,281-2) 

J  JO  -'  Zi, 


to  a  specified  tolerance  e,  where  /  is  the  integrand  given  in  Equation  3.281-1. 


1 42  EXPLANATORY  SUPPLEMENT 

Step  ii  The  parameters  of  the  Earth  and  the  atmospheric  model,  which  are  as- 
sumed to  be  constant  are 

R  =  8314.36    A/,,  =  28.966    MK  =  18.016    6  =  18.36 

rt  =  6378 1 20    ft,  =  1] 000     hs  =  80000    a  =  0. 0065  (3.28 1  -3) 

Step  2:  The  parameters  of  observation— the  initial  conditions.  The  observed  zenith 
distance,  zo,  of  an  object  with  wavelength  of  A/zm  is  recorded  by  an  observer  at 
latitude  0,  height  h0  meters  above  the  geoid  i.e.,  r0  =  re  +  h0  meters  from  the  cen- 
ter of  the  Earth.  The  meteorological  conditions  at  the  time  of  observation  are  the 
temperature  7^  K,  the  pressure  P0mb  and  the  relative  humidity  Rh. 

Step  3:  Calculate  the  parameters  dependent  on  the  initial  conditions  and  the 
model  of  the  atmosphere.  Those  denoted  by  Q  are  needed  at  each  step  of  the 
integration. 


a  fwrtnA  h62%%  0.0136\ 
A  =  287. 604  +  ; —  +  

V  X2  X4  J 


x  10"6. 


/Vi  =  /?,,(  7b  /  247. 1)*, 
g  =  9. 784(  1  -  0. 0026  cos  2d  -  0. 0000  0028  h0), 

1.6288    0.0\36\  273.  15 
1013.25 

C,  =  a,       C2=gMd/  R,       C3  =  C2  /  C,  =  7, 

C4  =  6,        C5=  />,,<>(  I -Mai  A/H,)7  /  (6  -  7), 

C6  =  A(P0  +  Cs)  /  To,       C7  m  (ACs  + 11. 2684  x  1 0~bPM)  I  T0, 

Cs  =  a(7  -  1  )C6  /  To,       C9  =  a(6  -  1)C7  /  7b.  (3.281^1) 


Step  4:  Use  the  following  expressions  to  calculate  r,  n,  and  dn  i  d>\  which  depend 
on  the  atmosphere,  and  thus  evaluate  the  integrand  /  at  each  step  in  z  along  the 
path  of  the  ray. 

The  value  of  r  corresponding  to  the  current  step  in  zenith  distance  z  is  found 
by  solving  Snell's  law  nrsinz  =  nQr0  sinz0  using  Newton- Raphson  iteration  thus: 


n+i  =  ti  - 


n,n  -  nQr0  s'mzu  I  sin; 


n,  +  ndtij  I  dr, 


for  i  =  1,2,...,  (3.281-5) 


where  rx  is  the  value  of  r  calculated  at  the  previous  step  of  the  integration.  Con- 
vergence is  rapid,  so  the  initial  estimate  r\  is  not  critical.  Four  iterations  should  be 
sufficient. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


143 


In  the  troposphere  at  distance  r  <  r,  from  the  center  of  the  Earth,  the  temper- 
ature T,  the  refractive  index  n,  and  dn!  dr  are  calculated  from 


T  =  T0  -  a(r  -  r0), 


n=\  + 


dn 
~dr 


L 
f:, 

1-2 


■  ^ 


T0 

6-2 


r 
n' 


(3.281-6) 


In  the  stratosphere  at  a  distance  r  where  r,  <  r  <  rs  and  the  temperature  is  given 
by  T,  =  T0  -  a(r,  -  ro)  the  refractive  index  n  and  dn/  dr  are  calculated  from 


n  =  1  +  (/t,  -  1 )  exp  (  -  C2 

dn  _  O 
dr  ~ 


r-  r, 
T, 

r  — 


T  (n,  -  l)exp^  -  C2-  ? 


The  integrand  is 


r'n'fr 


rdn  I  dr 
n  +  rdn  I  dr 


(3.281-7) 


(3.281-8) 


Step  5:  Calculate  the  following  parameters  which  are  required  for  the  limits  of  the 
two  integrals.  At  the  observer,  the  observed  zenith  distance  is  zo\  set  r0  =  re  +h,  and 
calculate  «0,  dno/dr0,  fo-  At  the  tropopause,  in  the  troposphere  calculate  r,  -  re  +h,, 
n,,  dn,  I  dr,,  /,,  and  using  Snell's  law 

■  nnro  sinzn 

Zt  =  sin"1  —  K  (3.281-9) 

n,r, 

At  the  tropopause,  in  the  stratosphere  r,x  =  r,,  and  calculate  nu,  dnls  I  dr,s,  /„,  and 
Zij.  At  the  limit  of  the  stratosphere  calculate  rs-re+  hs,  ns,  dns  I drs,  fs,  and  zs- 

Step  6:  Integrate  the  function  over  the  required  interval  using  numerical  quadra- 
ture, e.g.,  Simpson's  rule,  by  forming  the  summations  over  equal  steps  of  z.  In  the 
troposphere  S  =  (z,  -  z0)/  16  is  a  convenient  step  length  to  start  with.  Repeat  the 
integration,  halving  the  step  size  each  time,  until  there  is  no  significant  difference 
between  two  consecutive  values  and  the  tolerance  permitted  (i.e.,  0.5e).  Repeat  this 
step  for  the  stratosphere.  Thus  the  total  amount  of  refraction  will  be  £  =  £,  + 

3.282    Saastamoinen's  Refraction  Formula     This  formula,  valid  for  zenith  distances 
down  to  70°,  was  devised  by  Saastamoinen  (1972),  and  it  is  equivalent  to  the  re- 
fraction tables  in  The  Star  Almanac.  Given  the  observed  zenith  distance,  zo,  the 


-)  44  EXPLANATORY  SUPPLEMENT 

temperature,  pressure,  and  partial  pressure  of  water  vapor,  (7o,  Pq,  Pwo),  the  refrac- 
tion for  a  wavelength  of  0.574/im,  i.e.,  visible  light,  and  for  an  observer  at  sea 
level  is 

f  -  1 6"27 1  Q  tan  za  { 1  +  0. 0000  394  Q  tan2  zo) 
-  0"0000  749  P0(tm  zq  +  tan3  zo), 
where    Q  -  (Pq  -  0.  156fU)  /  %  (3.282-1) 

A  formula  to  calculate  Phq  in  terms  of  the  relative  humidity  is  given  at  the  start  of 
Step  3  in  Section  3.281.  Saastamoinen  gives  correction  tables  for  other  wavelengths 
and  heights  above  sea  level. 

3.283  Low-precision  Refraction  Topocentric  phenomena  such  as  the  times  of  ris- 
ing and  setting,  and  navigational  reductions  require  the  amount  of  refraction  ac- 
curate to  0'.5.  The  following  formula  is  dependent  on  the  apparent  altitude,  H; 
i.e.,  the  observed  altitude  corrected  for  the  index  error  of  the  sextant  and  dip  (see 
Section  9.331),  and  on  the  temperature  and  pressure,  and  gives  the  amount  of 
refraction,  /?,  in  degrees; 

R  =  (±2*L\   0?0167  

\T  +  2n)  tan(//  +  7.31/(//  +  4.4))' 

where  T,P  are  the  temperature  in  degrees  Celsius  and  the  pressure  in  millibars. 
If  T  and  P  are  unknown,  assume  the  term  in  the  first  bracket  is  unity.  The  effect 
of  refraction  is  removed  from  an  observation  by  subtracting  R  from  the  observed 
altitude.  When  only  the  true  altitude  is  known,  it  is  possible  to  iterate  using  the 
formula  above,  in  order  to  find  the  observed  altitude.  This  is  necessary,  particularly 
at  low  altitudes,  when  the  refraction  correction  is  large. 

Alternatively,  at  low  altitudes,  when  H  <  15°,  the  following  may  be  used: 

/     P     \  0?  1594  +  0. 0196//  +  0. 00002//2  283-2) 
"  \T  +  TTi )        1 +0.505// +  0.0845//2 

For  rising  and  setting  phenomena  a  constant  of  34'  is  used  for  the  horizontal 
refraction;  thus  for  the  center  of  the  Sun  or  Moon  to  be  coincident  with  the  horizon 
the  true  altitude  will  be  —34'. 

The  observed  right  ascension  and  declination,  (a,  6),  of  an  object  may  be 
corrected,  to  first  order,  to  give  the  true  position  Q\,6i,  using  the  following  formulas: 


Q]  =  Q 


RsecS  sinC 


6i  =  6  —  R  cos  C, 


(3.283-3) 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 45 

where  R  is  the  refraction  and  C  is  the  parallactic  angle— i.e.,  the  angle  at  the  object 
in  the  spherical  triangle  pole-object-zenith.  Thus  when  the  object  is  on  the  meridian 
C  =  0°,  and  the  amount  of  refraction,  R,  is  a  direct  correction  to  declination  only, 
but  the  right  ascension  is  unaffected. 

Refraction  tables  based  on  a  standard  temperature  and  pressure  are  printed  in 
various  publications,  for  example,  Abalakin  (1985),  Pulkova  (1956),  together  with 
correction  tables  for  other  temperatures  and  pressures.  The  standard  conditions 
used  in  The  Nautical  Almanac  are  T  =  10°C  and  P  =  1010  mb;  in  The  Star  Almanac 
T=1°C  and  the  pressure  P  =  1005  mb. 


3.3   APPARENT  AND  TOPOCENTRIC  PLACE  ALGORITHMS 

This  section  presents  a  set  of  algorithms  for  calculating  apparent  and  topocentric 
places  of  planets  and  stars.  The  methods  are  given  in  a  stepwise  form  using  matrix 
and  vector  operations  which  can  then  be  programmed  using  a  set  of  subroutines, 
each  of  which  handles  one  particular  aspect  of  the  reduction.  Full  details  on  the 
various  topics  are  discussed  in  the  appropriate  part  of  Section  3.2.  The  algorithm 
for  calculating  apparent  places  of  planets  and  solar-system  bodies  is  given  first, 
because  it  is  the  more  comprehensive.  The  procedures  for  calculating  apparent 
places  (Sections  3.31  and  3.32),  topocentric  places  (Section  3.35),  and  differential 
astrometry  (Section  3.4)  are  based  on  Kaplan  et  al.  (1989). 

The  following  notation  is  used  in  the  algorithms.  The  subscript  B  refers  to  the 
solar-system  barvcenter,  u  =  |u|  means  calculate  the  square  root  of  the  sum  of  the 
squares  of  the  components,  and  (u  •  r)  indicates  the  scalar  product,  i.e.,  the  sum  of 
the  products  of  their  corresponding  components. 

3.31    Apparent-Place  Algorithm  for  Planets 

The  algorithm  used  to  compute  the  apparent  place  of  a  planet  or  other  solar- 
system  bodv  at  an  epoch  of  observation  f',  given  its  ephemeris  with  origin  at  the 
solar-system  barycenter  and  its  coordinates  referred  to  the  Earth's  mean  equator 
and  equinox  of  a  reference  epoch,  to,  can  be  succinctly  represented  as 

u4(f')  -  N(0P(0/lg  [uB(r  -  t)  -  EB(f)]],  (3.31-1) 

where 

t>       is  the  epoch  of  observation,  in  the  TDT  timescale; 
i       is  the  epoch  of  observation,  in  the  TDB  timescale; 

to       is  the  reference  epoch  to  which  the  ephemeris  is  referred,  e.g.,  J  2000.0; 
r       is  the  light  travel  time  from  the  planet  to  the  Earth,  in  the  TDB  timescale, 
for  light  arriving  at  the  epoch  of  observation  f, 


1  46  EXPLANATORY  SUPPLEMENT 

uB(/  —  t)  is  the  barycentric  position  of  the  planet  at  epoch  t  -  r,  referred  to  the 

mean  equator  and  equinox  of  /oi 
EB(t)       is  the  barycentric  position  of  the  Earth  at  the  epoch  of  observation  /. 

referred  to  the  mean  equator  and  equinox  of  to; 
g[...]       is  the  function  representing  the  gravitational  deflection  of  light; 
/[...]       is  the  function  representing  the  aberration  of  light; 
P(f)       is  the  precession  matrix,  a  rotation  from  the  mean  equinox  and  equator 

of  /o  to  the  epoch  of  observation  t\ 
N(r)       is  the  nutation  matrix,  a  rotation  from  the  mean  equinox  and  equator 

of  date  to  the  true  equinox  and  equator  of  date  t; 
u4(/')       is  the  apparent  geocentric  place  of  the  planet  at  the  epoch  of  observation 

t'  represented  as  a  three-dimensional  position  vector  (x,y,  z)  and  referred 

to  the  true  equinox  and  equator  of  observation. 

This  expression  is  schematic;  the  full  functional  forms  of  /  and  g,  the  elements 
of  the  P  and  N  matrices,  and  other  auxiliary  calculations  are  not  indicated. 

3.311    Relevant  Time  Arguments 

Step  a:    Express  the  epoch  of  observation  t1  as  a  TDT  Julian  date. 

Step  b:  Compute  T',  the  number  of  Julian  centuries  in  the  TDT  timescale  from 
J2000.0  TDT  (JD  2451545.0)  TDT. 

T'  =  (t'  -  245 1545.0)/ 36525  (3.311-1) 

Step  c:  Compute  the  mean  anomaly  m  of  the  Earth  in  its  orbit,  in  radians,  at  the 
epoch  of  observation 

m  =  (357. 528  +  35999. 050  T)  x  2tt  1 360.  (3.31 1-2) 

Step  d:  Compute  s,  the  difference,  in  seconds,  between  the  clock  reading  in  the  two 
timescales  (in  the  sense  TDB -TDT),  and  t,  the  TDB  Julian  date  corresponding 
to  the  epoch  of  observation 


5  =  0. 001658 sin(w  +  0.0167l  sinw), 
/  =  /'  +  s  I  86400. 


(3.311-3) 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  47 

Step  e:  Compute  7*,  the  number  of  Julian  centuries  in  the  TDB  timescale  elapsed 
since  J2000.0  TDB  (JD  2451545.0  TDB) 

T={t-  2451545.0)/ 36525.  (3.311-4) 


In  the  expression  for  s,  the  lunar  and  planetary  terms  of  order  10-5  seconds  have 
been  ignored.  Furthermore,  the  expression  for  m  (Step  c)  strictly  requires  a  time 
argument  in  the  TDB,  not  the  TDT,  timescale.  See  Moyer  (1981)  for  a  complete 
discussion. 

However,  the  algorithm  given  above  is  much  more  precise  than  is  required  for 
the  computation  of  apparent  places  of  stars  and  most  solar-system  bodies.  For 
stellar  apparent  places,  set  s  =  0,  /  =  t1,  and  T  =T'  with  negligible  error.  For  solar- 
system  bodies,  the  same  approximation  can  be  used  for  all  bodies  except  the  Moon 
and  close-approaching  comets  and  asteroids,  where  the  error  in  using  the  t  =  t' 
approximation  may  approach  O'.'OOl  in  very  unfavorable  circumstances. 


3.312    Ephemeris  Data  for  the  Earth  and  Sun 

Step  f:  Extract  from  the  ephemeris,  for  the  time  t,  the  barycentric  position  and 
velocity  of  the  Earth,  EB(f)  and  EB(r),  and  the  barycentric  position  of  the  Sun, 
Sb(0j  referred  to  the  Earth's  mean  equator  and  equinox  of  the  reference  epoch  ?o- 
Also  form  the  heliocentric  position  of  the  Earth  EH(f)  =  EB(r)  -  SbU)-  Note  that  the 
barycentric  position  of  the  Earth  is  that  of  the  center  of  mass  of  the  Earth,  and 
not  that  of  the  Earth  Moon  barycenter.  All  position  vectors  are  in  AU  and  velocity 
vectors  in  AL'/day. 

The  standard  ephemeris  of  the  major  bodies  in  the  solar  system  is  the  Jet 
Propulsion  Laboratory  ephemeris  designated  DE200  (Standish  1982a).  The  posi- 
tions of  the  Sun,  Moon,  and  planets  given  in  The  Astronomical  Almanac  and  other 
international  almanacs  are  now  obtained  from  this  ephemeris.  Values  of  the  com- 
ponents of  the  vectors  EB.  EB,  and  —Eh  at  1-day  intervals  are  tabulated  in  The 
Astronomical  Almanac.  A  set  of  analytical  planetary  theories  fitted  to  DE200  has 
been  developed  by  Bretagnon  (1982). 

The  barycentric  position  of  the  Earth  is  used  to  form  the  geocentric  position 
of  the  body  (see  Sections  3.314  and  3.315);  the  barycentric  velocity  of  the  Earth  is 
used  in  the  aberration  computation  (Section  3.317);  and  the  heliocentric  position 
of  the  Earth  is  used  in  the  computation  of  the  relativistic  gravitational  deflection 
of  light  (Section  3.316). 


148 

3.313   Ephemeris  Data  for  the  Planet 


EXPLANATORY  SUPPLEMENT 


Step  g:  Extract  from  the  ephemeris,  for  the  time  /,  the  barycentric  position  of  the 
planet,  uB(/),  referred  to  the  Earth's  mean  equator  and  equinox  of  the  reference 
epoch  J2000.0. 

3.314   Geometric  Distance  Between  Earth  and  Planet 

Step  h:  Compute  d,  the  geometric  distance  between  the  positions  of  the  center  of 
mass  of  the  planet  and  the  Earth  at  time  t,  in  AU,  from 

d  =  |uB(f)  -  EB(0|-  (3.314-1) 

The  geometric  distance  is  the  quantity  tabulated  in  The  Astronomical  Almanac  as 
the  "true  distance"  of  solar-system  bodies. 

Using  d  compute  r,  a  first  approximation  to  the  light-travel  time  between  the 
planet  and  the  Earth,  as 

T  =  d/c,  (3.314-2) 

where  c  is  the  speed  of  light  expressed  in  AU/day;  its  precise  value  may  be  computed 
from  86400/ ta,  where  ta  is  the  light-time  for  unit  distance  (1  au)  in  seconds.  In  the 
IAU  (1976)  system  c=  86400/499.004782  -  173. 144633  Au/day. 

3.315    Geocentric  Position  of  Planet,  Accounting  for  Light-Time 

Step  i:    Extract  from  the  ephemeris,  for  the  time  t  -  t,  the  barycentric  position  of 
the  planet  and  the  Sun,  uB(f  -  r)  and  SB(f  -  r),  respectively. 

Step  j:  Calculate  U  and  Q,  approximations  to  the  geocentric  and  heliocentric  po- 
sition of  the  center  of  mass  of  the  planet,  respectively,  at  the  epoch  of  observation 
t,  from 

U  =  uB(>  -  r)  -  EB(0,  (3.315-1) 
Q  =  uB(/  -  T)  -  SB(/  -  t).  (3.315-2) 

Step  k:    Next  compute  t',  a  better  approximation  to  the  light-travel  time  between 
the  planet  and  the  Earth,  as 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


149 


Cr'  =  (/  +  (2A//c2)ln|^|,  (3.315-3) 


where  U  =  |U|,  E  =  |EH|.  Q  -  |Q|,  H  is  the  heliocentric  gravitational  constant  and 
c  is  the  speed  of  light  in  AU/day  (Equation  3.314-2).  Using  the  IAU  1976  system, 
fi=  1. 32712438  x  1020m3s-2. 

Compare  r'  with  t;  if  they  are  identical  within  some  small  tolerance,  continue 
to  Step  1.  If  they  are  not,  then  replace  the  value  of  r  with  the  value  of  r'  and  repeat 
Steps  i  through  k  until  the  light-time  converges  to  within  the  tolerance  permitted. 
Since  the  speed  of  bodies  in  the  solar  system  is  small  compared  to  the  speed  of 
light,  this  process  converges  rapidly. 

The  tolerance  permitted  depends  on  the  precision  desired  in  the  final  coordi- 
nates and  the  apparent  angular  speed  of  the  body  as  viewed  from  Earth.  The  most 
rapidly  moving  objects  in  the  sky  are  the  Moon  (angular  rate  =  0'.'5  per  second), 
Mercury  (angular  rate  at  inferior  conjunction  0!'05per  second),  and  the  Sun  (an- 
gular rate  0'.'04per  second).  However,  occasionally  an  Earth-crossing  asteroid  or 
comet  may  exceed  these  rates  for  short  periods  of  time.  For  a  computational  preci- 
sion of  one  milliarcsecond,  therefore,  the  light-time  convergence  tolerance  must  be 
0?002  =  2  x  10  8  days  or  less;  we  suggest  1  x  10~8  days. 

Kaplan  et  al.  (1989)  ignore  the  second  term  in  Equation  3.315-3,  (order  1  micro- 
arcsecond),  which  is  due  to  the  relativistic  delay  caused  by  the  Sun's  gravitational 
field. 

Step  1:  Once  r  has  converged,  set  U  =  uB(r-r)-EB(f)  and  Q  =  uB(f-T)-SB(/-r), 
the  geocentric  and  heliocentric  positions  of  the  body  at  time  t  —  r. 

3.316    Relativistic  Deflection  of  Light 

Step  m:    Form  the  following  unit  vectors  and  dimensionless  scalar:  quantities 

u  =  U/|U|,       q  =  Q/|Q|,       e  =  EH/|EH|, 

2  (3.316-1) 

where  the  constants  fi  and  c  are  given  in  Steps  k  and  h.  A  detailed  explanation  on 
light  deflection  is  given  in  Section  3.26. 


"150  EXPLANATORY  SUPPLEMENT 

Step  n:  The  deflected  position  of  the  body  relative  to  the  geocentric  inertia]  frame 
that  is  instantaneously  stationary  in  the  space-time  reference  frame  of  the  solar 
system  (the  natural  frame)  is  then 

U| = 'u'  (u + f! [(u  ■ q)e  _  (e  ■ u)  qI)  •         (3'3 1 6~2) 

The  vector  u  /  )U|  is  a  unit  vector  to  order  pi  c2. 

For  the  Sun  or  bodies  lying  behind  the  Sun  on  the  Sun-Earth  line,  the  light  deflec- 
tion can  be  considered  zero,  so  that  u  =  U. 

3.317    Aberration  of  Light 

Step  o:    Form  the  following  quantities: 

p  =  ttl/|»i|,  V  =  EB(r)/c, 

0-l*Vl-V*,       /,=(p-V),  /2  =  i+/,/(i+/3-i);  (3.317-1) 

where  the  velocity  (V)  is  expressed  in  units  of  the  velocity  of  light  and  is  equal  to 
the  Earth's  velocity  in  the  barycentric  frame  to  order  V2. 

Step  p:  The  aberrated  position  of  the  body  in  the  geocentric  inertial  frame  that  is 
moving  with  instantaneous  velocity  (V)  of  the  Earth  relative  to  the  natural  frame 
is  then  given  by  the  vector 

»2  =  0?~Vi  +/2|ui|V)/(l  +/,).  (3.317-2) 

The  above  algorithm  includes  relativistic  terms  (Murray.  1981)  (see  Section  3.252). 
which  are  of  the  order  1  milliarcsecond.  Therefore,  for  many  applications  one  may 
use  the  much  simpler  classical  formula 

u2  =  Ui+|u,|V.  (3.317-3) 

3.318  Precession 

Step  q:  Evaluate  the  three  fundamental  precession  angles  zA,  and  0A  using 
the  equations  given  in  Section  3.211  with  epoch  eF  =  J2000.0  and  eD  =  t  and  the 
associated  matrix  P  (Equation  3.21-8). 


3  /  CELESTIAL  REFERENCE  SYSTEMS  151 

Step  r:  Transform  the  coordinates  from  the  fixed  reference  epoch  to  -  J2000. 0  to 
the  epoch  of  observation  t,  by  applying  the  precession  matrix  P  to  the  vector  u2: 


u3=Pu2.  (3.318-1) 


3.319  Nutation 

Step  s:  Evaluate  the  mean  obliquity  of  the  ecliptic,  e$,  the  two  fundamental  nuta- 
tion angles,  Aw,  Ac  and  the  true  obliquity  of  the  ecliptic  e  =  €q  +  Ae,  for  the  epoch 
of  observation  t,  and  calculate  the  associated  nutation  matrix  N.  Full  details  are 
given  in  Section  3.222. 

Step  t:  Transform  the  coordinate  system  to  that  defined  by  the  Earth's  true  equa- 
tor and  equinox  at  the  epoch  of  observation  /,  by  applying  the  nutation  matrix  N 
to  vector  113 : 

u4  =  Nu3,  (3,319-1) 

where  114  is  the  apparent  geocentric  position  vector  of  the  planet  at  the  epoch  of 
observation  t' . 

The  combined  precession-nutation  matrices  given  in  The  Astronomical  Almanac 
(R  =  NP)  may  be  used  in  place  of  Steps  q  through  t  above;  thus  114  =  Rui,  where 
the  values  of  the  elements  of  R  must  be  interpolated  to  the  epoch  of  observation. 


3.31 10    The  Apparent  Position  in  Spherical  Coordinates 

Step  u:  Compute  the  object's  apparent  geocentric  right  ascension,  a,  and  decli- 
nation, S,  at  the  epoch  of  observation  f,  using  the  three  components  of  the  vector 
U4,  i.e.,  x,  y,  and  z: 

a  =  tan-'^    and    6  =  tan"1  —=J=.  (3.3110-1) 
*  \/x2+y1 


Note:  U4  is  not  a  unit  vector.  Most  computers  have  a  double  argument  function 
for  inverse  tangent  (e.g.,  ATAN2)  which  will  provide  the  correct  quadrant  if  the 
numerator  and  denominator  are  entered  as  separated  arguments. 


152 

3.32   Apparent-Place  Algorithm  for  Stars 


EXPLANATORY  SUPPLEMENT 


The  algorithm  used  to  compute  the  apparent  place  of  a  star  at  an  epoch  of  ob- 
servation f',  given  its  mean  place,  proper  motion,  and  other  data  (as  available)  at 
reference  epoch  to,  can  be  succinctly  represented  as 

04(0  =  N(0  P(r)/[g[uB(r0)  +  (t  -  /0)uB('o)  -  E„(r)]],  (3.32-1 ) 

where 

t'  is  the  epoch  of  observation,  in  the  TDT  timescale; 
/       is  the  epoch  of  observation,  in  the  TDB  timescale; 

/0       is  the  reference  epoch  and  equinox,  e.g.,  .12000.0,  of  the  star  catalog,  in 
the  TDB  timescale; 

uB(f0)  is  the  catalog  mean  place  of  the  star  at  the  reference  epoch  to,  represented 
as  a  three-dimensional  position  vector  in  AU,  with  origin,  solar-system 
barycenter,  and  coordinates  referred  to  the  mean  equator  and  equinox 
of  t0; 

Ub('o)  's  the  space  motion  vector  (in  Au/day)  of  the  star  at  the  reference  epoch 
to,  obtained  from  the  catalog  proper  motions,  parallax,  and  radial  veloc- 
ity; 

Eb       is  the  barycentric  position  of  the  Earth  at  the  epoch  of  observation  t. 
referred  to  the  mean  equator  and  equinox  of  to; 
g[...]       is  the  function  representing  the  gravitational  deflection  of  light; 
/[...]       is  the  function  representing  the  aberration  of  light; 
P(f)       is  the  precession  matrix,  a  rotation  from  the  mean  equinox  and  equator 

of  to  to  the  epoch  of  observation  f; 
N(f)       is  the  nutation  matrix,  a  rotation  from  the  mean  equinox  and  equator 
of  date  to  the  true  equinox  and  equator  of  date  t; 
U4(r')       is  the  apparent  geocentric  place  of  the  star  at  the  epoch  of  observation 
t'  represented  as  a  three-dimensional  position  vector  (x,y,  z)  and  referred 
to  the  true  equinox  and  equator  of  observation. 

This  expression  is  similar  to  Equation  3.31-1  for  planets.  Most  of  the  algorithm 
is  identical;  the  difference  is  due  only  to  the  more  complex  motion  of  a  planet 
compared  to  that  of  a  star.  In  Section  3.31  we  had  to  obtain  the  position  of  the 
planet  from  an  ephemeris  and  deal  with  the  light-time  problem  explicitly;  in  this 
section  we  will  assume  uniform  rectilinear  motion  for  the  star  and  neglect  variations 
in  light-time  as  the  star  moves. 

3.321    Relevant  Time  Arguments 

Step  1:  Follow  Steps  a  through  e  in  Section  3.311.  This  gives  the  value  of  t,  the 
TDB  Julian  date  corresponding  to  the  epoch  of  observation,  and  T  the  number  of 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 53 

Julian  centuries  in  the  TDB  timescale  elapsed  from  the  reference  epoch  J2000.0 
TDB.  For  stars,  skip  Step  c  and  simply  set  t  -  t'. 


3.322  Ephemeris  Data  for  the  Earth  and  Sun 

Step  2:  Follow  Step  f  in  Section  3.312  and  extract  from  an  ephemeris,  for  time  /, 
Eb(0i  Eb(0,  and  Sb(0)  the  barycentric  position  and  velocity  of  the  Earth,  and  the 
barycentric  position  of  the  Sun.  Also,  form  EH(f)  =  EB(r)  -  SB(r),  the  heliocentric 
position  of  the  Earth.  All  position  vectors  are  in  au  and  velocity  vectors  in  Au/day. 

For  apparent  places  of  stars  accurate  to  a  few  milliarcsecond  it  is  necessary 
only  to  obtain  the  Earth  and  Sun's  position  components  to  three  significant  dig- 
its and  the  Earth's  velocity  components  to  five  significant  digits.  It  is  therefore 
feasible  to  construct  relatively  compact  closed-form  algorithms  which  provide  the 
required  data  (Stumpff,  1980b).  The  U.S.  Naval  Observatory  has  developed  com- 
puter subroutines,  based  on  a  truncated  and  modified  form  of  Newcomb's  theory, 
which  evaluates  the  barycentric  position  and  velocity  of  the  Earth,  without  using 
external  files.  However,  for  the  highest  precision,  or  when  the  apparent  places  of 
planets  are  being  computed  more  complex  algorithms  or  external  files  are  required. 

3.323  Star's  Position  and  Space  Motion  Vectors  at  the  Catalog  Epoch 

Step  3:  Given  are  a  and  6,  the  catalog  mean  barycentric  right  ascension  and  decli- 
nation of  the  star  at  t0  =  245 1545. 0,  the  reference  epoch  J2000.0,  and  f.ta  and  fi6  the 
corresponding  proper  motion  components  in  seconds  of  time  and  arc,  respectively, 
per  Julian  century  (of  TDB).  Also  given  are  p,  the  parallax  of  the  star  in  seconds 
of  arc,  and  r,  its  radial  velocity  in  km/s. 

Form  the  barycentric  position  vector,  uB(fo)  (in  Au),  and  space  motion  vector, 
"bCo)  (AU/day),  of  the  star  at  the  catalog  epoch  f0,  referred  to  the  Earth's  mean 
equator  and  equinox  of  the  catalog  epoch  using  Equations  3.23-1  and  3.23-3  in 
Section  3.23. 

3.324  Star's  Position  Vector  at  the  Epoch  of  Observation 

Step  4:  Compute  the  barycentric  position  of  the  star,  at  the  epoch  of  observation, 
by  adding  the  distance  moved  during  the  interval  of  time  between  the  catalog  epoch 
and  the  epoch  of  observation,  as 


uB(f)  =  ub('o)  +  (*'-  'u)uB('a). 


(3.324-1) 


154 


EXPLANATORY  SUPPLEMENT 


The  assumption  is  made  that  there  is  no  explicit  correction  for  light-time  in  stellar 
apparent-place  computations  (see  Section  3.23). 

3.325  Geocentric  Position  of  the  Star 

Step  5:  Form  the  vector  U,  which  represents  the  geocentric  position  of  the  star  at 
the  epoch  of  observation,  t. 

U  =  uB(f)-EB(f).  (3.325-1  j 

This  step  introduces  annual  parallax,  and  is  a  shift  of  the  origin  from  the  solar 
system  barycenter  to  the  Earth's  center  of  mass. 

3.326  Relativistic  Deflection  of  Light 

Step  6:  Follow  Steps  m  through  n  in  Section  3.316,  with  Q  =  Ub(0  —  SB(f)  the 
heliocentric  position  of  the  star,  to  obtain  the  geocentric  position  of  the  star  Uj, 
corrected  for  relativistic  light  deflection. 

3.327  Aberration,  Precession  and  Nutation 
Step  7:    Follow  Steps  o  and  p  in  Section  3.317. 
Step  8:    Follow  Steps  q  and  r  in  Section  3.318. 
Step  9:    Follow  Steps  s  and  t  in  Section  3.319. 

3.328  Star's  Apparent  Position  in  Spherical  Coordinates 
Step  10:    Follow  Step  u  in  Section  3.3110. 

3.33   The  Computer  Implementation  of  Apparent-Place  Algorithms 

The  development  of  the  apparent-place  algorithms  using  matrix/vector  notation  is 
rigorous,  and  allows  the  planet  and  star  algorithms  to  use  those  parts  which  are 
common  to  both.  It  also  allows  users  to  tailor  their  program  to  their  own  needs,  as 
well  as  the  testing  of  alternative,  or  simplified,  algorithms  for  special  purposes. 

In  this  unified  approach  for  planets  and  stars,  position  vectors  have  been  used 
throughout.  Many  other  algorithms  use  unit  vectors  (see  The  Astronomical  Alma- 
nac). There  are  penalties  either  way,  and  if  the  procedures  are  carefully  implemented 
the  results  will  be  identical. 

The  method  given  here  involves  a  series  of  steps.  However,  if  the  observation 
time  remains  the  same,  quantities  such  as  the  time  arguments,  the  ephemeris  data 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  55 

for  the  Earth,  and  the  precession  and  nutation  matrices  can  be  saved  and  re-used. 
For  example,  when  there  are  a  large  number  of  apparent  places  to  be  computed, 
it  is  more  efficient  to  compute  the  places  of  all  bodies  at  a  given  observing  epoch 
before  moving  to  a  new  observing  epoch.  The  major  computational  burden  in  the 
algorithm  involves  the  retrieval  of  data  from  the  planetary  ephemeris  in  Steps  f 
through  1  and  the  evaluation  of  the  two  nutation  angles  A^  and  Ae  in  Step  s. 

If  computational  time  becomes  critical  (such  as  within  telescope-control  sys- 
tems or  in  microcomputer  implementations),  the  method  of  obtaining  the  ephem- 
eris and  nutation  data  must  be  considered.  Self-contained  algorithms  can  often  be 
simplified  by  truncating  small  terms  from  the  series,  if  high  precision  in  the  final 
apparent  place  is  not  required.  Consideration  should  also  be  given  to  precomputing 
the  required  data  for  fixed  intervals  and  storing  the  data  in  an  external  file  that  can 
be  efficiently  accessed  and  interpolated.  Planetary  ephemeris  data  are  frequently 
distributed  in  this  form  anyway.  Precomputing  and  storing  the  elements  of  the  com- 
bined precession-nutation  matrix  (see  end  of  Step  t)  is  also  feasible;  see  Section  B  of 
The  Astronomical  Almanac.  The  convenience  of  self-contained  algorithms  must  be 
weighed  against  the  number  of  calculations  required,  the  accuracy  of  the  algorithm, 
and  the  accuracy  needed  for  the  final  result. 

3.34   Apparent-Places-Day-Number  Technique 

The  1976  IAU  resolutions  on  the  astronomical  reference  frame  included  two  state- 
ments about  the  procedures  for  computing  apparent  places  and  the  reduction  of 
observations.  First,  reductions  to  an  apparent  place  shall  be  computed  rigorously 
and  directly  without  the  intermediary  of  the  mean  place  for  the  beginning  of  the 
year  whenever  high  precision  is  required.  Second,  stellar  aberration  shall  be  com- 
puted for  the  total  velocity  of  the  Earth  referred  to  the  barycenter  of  the  solar 
system  and  the  mean  places  shall  not  contain  E-terms.  Implicit  in  that  recommen- 
dation is  the  fact  that,  when  accurate  results  are  desired,  day  numbers  should  not 
be  used.  Thus,  this  section  on  day  numbers  is  included  as  a  means  to  help  unravel 
what  may  have  been  done  to  observations  in  the  past  and  to  understand  the  proce- 
dures that  were  followed  in  the  past  for  historical  purposes,  and  for  those  who  can 
be  satisfied  with  a  reduced  level  of  accuracy,  e.g.,  for  making  rapid  calculations  of 
star  positions  in  real  time  for  pointing  telescopes. 

Before  we  explain  the  methods  of  day  numbers,  an  additional  warning  concern- 
ing the  past  practice  for  computing  day  numbers  seems  advisable.  Specifically  there 
have  been  a  number  of  changes  in  the  method  used  for  computing  the  aberration 
day  numbers,  C  and  D.  A  detailed  discussion  is  given  in  Section  3.53. 

The  day-number  technique  may  also  be  used  for  objects  within  the  solar  system, 
but  the  geocentric  position  of  the  body  is  required  at  the  time  t  —  At,  where  At  is 
the  light-time.  Thus  the  proper  motion,  and  annual  parallax  corrections  must  be 
omitted. 


1  56  EXPLANATORY  SUPPLEMENT 

The  calculation  of  the  apparent  place  of  a  star  for  a  date  t+T,  where  t  represents 
a  fixed  epoch  such  as  the  beginning  of  the  Besselian  year  or,  as  is  current  practice, 
the  middle  of  the  Julian  year,  and  r  represents  a  fraction  of  the  year,  first  requires 
the  calculation  of  the  mean  place  for  the  mean  equinox  and  epoch  of  t.  The  reduction 
then  involves  the  application  of  corrections  for  precession,  from  the  epoch  t  for  the 
interval  f,  nutation,  stellar  aberration,  annual  parallax,  proper  motion,  and  orbital 
motion. 

Proper  motion,  orbital  motion,  and  stellar  aberration  do  not  affect  the  frame 
of  reference,  but  cause  changes  in  the  actual  direction  in  which  the  star  is  observed; 
the  corresponding  corrections  must  therefore  be  calculated  with  respect  to  a  par- 
ticular reference  system  and  applied  to  the  position  of  the  star  in  the  same  system. 
Precession  and  nutation,  however,  are  changes  in  the  frame  of  reference  and  do  not 
affect  the  actual  direction  in  which  the  star  is  observed.  These  two  corrections,  and 
that  for  annual  aberration,  are  sufficiently  large  to  make  their  order  of  application 
of  significance  if  cross-product  terms  are  neglected.  The  corrections  for  parallax, 
proper  motion,  and  orbital  motion  are  generally  very  small  and  can  be  applied  at 
any  convenient  stage. 

Since  nutation  is  calculated  from  the  longitudes  of  the  Sun  and  Moon  referred  to 
the  mean  equinox  of  date,  it  is  (theoretically)  necessary  to  apply  precession  before 
nutation.  There  are  then  two  methods  for  calculating  the  reduction  to  apparent 
place;  if  precession  and  nutation  are  applied  first  {Method  1),  then  the  aberration 
correction  should  strictly  be  applied  to  a  fixed  star  whose  coordinates  (referred  to 
the  moving  frame  of  reference)  are  continuously  changing.  If  aberration  is  applied 
first  (Method  2)  then  the  corrections  for  precession  and  nutation  should  strictly  be 
applied  to  the  changing  position  of  the  star. 

The  two  methods  give  identical  results,  of  course,  but  for  systematic  calcula- 
tion one  must  apply  corrections  for  precession,  nutation,  and  aberration  to  a  fixed 
star,  any  residual  corrections  (if  appreciable)  being  applied  separately.  As  might  be 
expected,  the  largest  correcting  term  is  the  same  for  both  methods,  but  the  other 
terms  differ.  An  analysis  of  the  magnitude  of  the  residual  terms,  taken  in  conjunc- 
tion with  the  second-order  terms  of  precession,  nutation,  and  aberration  themselves, 
show  conclusively  that  Method  2  leads  to  smaller  residual  errors  (Porter  and  Sadler, 
1953;  see  also  Section  3.344;  also,  it  is  more  logical  to  apply  aberration  with  respect 
to  a  fixed  frame  of  reference.) 

Prom  1984  onward,  the  day  numbers  printed  in  The  Astronomical  Almanac  are 
calculated  according  to  Method  2,  and  are  designed  for  use  with  star  places  referred 
to  the  mean  epoch  and  equinox  of  the  middle  of  the  Julian  year. 

3.341  Methods  Using  Day  Numbers  The  apparent  right  ascension  and  declination 
(ai ,  6 j ) ,  of  a  star  at  an  epoch  t+T,  which  includes  the  effects  of  precession,  nutation, 
annual  aberration,  proper  motion,  and  annual  parallax,  and  includes  the  second- 
order  day  numbers  (J  and  J'  see  Section  3.344),  may  be  calculated  either  using  the 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  57 

Besselian  day  numbers  A,  B,  C,  D,  E,  and  star  constants  (Section  3.342),  from 


+  Aa  +  Bb+Cc  +  Dd  +  E  +  J tan2  6  +  r/x„  +  w(dX  -  cY), 
5]=6+Aa'  +  Bb'  +  Cc'  +  Dd'  +  f  tan  6  +  Tfis  +  ir(d'X  -  c'Y),  (3.341-1) 

or  using  the  independent  day  numbers  /,  g,  G,  h,  H  (Section  3.343),  from 

qi  =  a  +  f  +  g  sin  (G  +  a)  tan  6  +  h  sin  (H  +  a)  sec  6+ J  tan2  <5 

+  T/za  +  w(dX  -  cY), 
S\  =  8  +  g  cos  (G  +  a)  +  h  cos  (H  +  a)  sin  <5  +  i  cos  6  +  f  tan  S 

+  Tvs  +  K(d'X-c'Y),  (3.341-2) 

where  a,  6  are  the  right  ascension  and  declination  of  the  star  for  the  mean  equinox 
and  epoch  of  f,  and  fia  and  fig  are  the  annual  proper  motions  in  right  ascension 
and  declination,  respectively,  and  tt  is  the  parallax.  X  and  Y  are  the  barycentric 
coordinates  of  the  Earth.  The  day  numbers  are  usually  tabulated  in  seconds  of  arc; 
when  used  for  calculating  the  star's  right  ascension,  measured  in  time,  either  they 
or  the  star  constants  by  which  they  are  multiplied  should  be  divided  by  15. 

For  stars,  the  corrections  for  the  deflection  of  light,  which  has  not  been  included, 
are  given  in  Section  3.261. 


3.342    Besselian  Day  Numbers  and  the  Star  Constants    To  the  first  order,  the  Besselian 
day  numbers  A,  B,  and  E  correct  for  precession  and  nutation;  C  and  D  correct  for 
annual  aberration,  and  are  given  by 

Atb 

A  =nr  +  n——  =  tit  +  sin  £q  At/>, 

ib 

B  -  -Ae, 

E  =  A'— f.,  (3.342-1) 

where  A'  =  xa(T  =  Q,  t  +  r),  tb'  =  ipA(T  =  0S t  +  T%  ftj  and  m  (for  the  independent  day 
numbers)  are  the  processional  parameters  (Section  3.211),  and  the  nutation  angles 
Atb,  Ae,  and  e0  the  mean  obliquity  of  the  ecliptic,  are  given  in  Section  3.222.  They 
are  all  evaluated  for  the  epoch  t  +  T. 

Since  1960  (see  Section  3.53  for  previous  methods)  the  aberrational  day  num- 
bers are  a  function  of  the  Earth's  barycentric  velocity  r,  and  are  given  by 


D=-kX    C=+kY    I  =  +kZ, 


(3.342-2) 


158 


EXPLANATORY  SUPPLEMENT 


where  r'  =  (X,  Y,Z)  are  the  velocity  components,  in  AU  per  day,  referred  to  the  mean 
equinox  of  t  (since  aberration  is  applied  first),  and  k  =  (t^/86400)  x  R  x  3600,  where 
ta  =  499. 004782  is  the  light- time  for  unit  distance  in  seconds,  and  R  converts  from 
radians  to  degrees  (i.e.,  k  converts  from  All/per  day  to  seconds  of  arc). 

If,  however,  the  barycentric  velocity  of  the  Earth  (ro)  is  referred  to  the  standard 
equinox  of  J2000.0,  (e.g.,  as  in  DE200),  then  use  the  precession  matrix  P  (see 
Section  3.21)  to  precess  these  coordinates  from  the  fixed  equinox  of  J2000.0  to  the 
equinox  of  date  t,  i.e., 

r  =  P[J2000. 0,  f]  r0  (3.342-3) 


The  quantities  Aip,  Ae,  A,  B,  C,  D,  E,  in  seconds  of  arc,  and  r  are  tabulated 
daily  in  The  Astronomical  Almanac. 

The  star  constants,  which  are  constant  only  for  the  mean  equinox  of  the  fixed 
epoch  t,  are  defined  by 

a  =  m  I  n  +  sin  a  tan  S,     a'  =  cos  a, 
b  =  cos  a  tan  6,  b'  =  -  sin  a, 

(3.342-4) 

c  =  cos  a  sec  8,  c'  -  tan  e0  cos  8  -  sin  a  sin  8, 

d  —  sin  o.  sec  8,  d'  =  cos  a  sin  6, 


where  a  and  8  are  the  mean  place  of  the  star  for  epoch  f.  The  precession  rates 
(Section  3.211)  m  and  n,  and  6q,  also  should  be  evaluated  for  epoch  f. 

3.343  Independent  Day  Numbers  The  independent  day  numbers  /,  g,  and  G  cor- 
rect for  precession  and  nutation,  and  h,  H,  and  i  correct  for  annual  aberration.  They 
are  given  by 

/  =  (m/n)A  +E  =  mr  +  cose  At}>,         hsinH  =  C, 
g  sin  G^B,  hcosH  =  D,  (3.343-1) 

gcosG  =  /l,  <'  =  Ctane. 


These  day  numbers  are  defined  in  terms  of  the  Besselian  day  numbers,  which  are 
given  in  Section  3.342. 

; 

3.344  Second-Order  Day  Numbers  In  the  equations  of  Section  3.341  the  terms 
/  and  J'  are  called  the  second-order  day  numbers,  and  approximate  the  second- 
order  terms  that  have  been  ignored.  Table  3.344.1  lists  all  the  second-order  terms 
neglected  from  approximations  made  at  the  various  stages. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


159 


Table  3.344.1 

Second-Order  Terms 


Term 

Act  cos  S 

AS 

1 

+/gcos  (G  +  a)  sin  6 

-fg$m(G  +  a) 

2 

—  ifocos  Gcosasini5 

+  ^/gcos  Gsin  a 

3 

+iy2sin2(G  +  (T)tan(5sin<5 

-ig2  sin2  (G  +  a)  tan  6 

4 

cos  a  sin  (2G  +  a)  cos  8 

5 

+  |h2sin2(H+  a)  sec  6 

-|  ft2  sin2  (H  +  a)tan£ 

6 

+^rr  cos^  (H  +  a)  sin  28 

7 

+h/cos(H  +  a)  cos  28 

8 

sin  28 

9 

+gh  sin  (G+H+  2a)  tan  S 

-gh  sin  (G  +  a)  sin  (H  +  a)  sec  8 

10 

+g/sin{G  +  a) 

Terms  1  to  4  are  neglected  in  the  approximations  for  precession  and  nutation,  5 
to  8  are  neglected  at  the  annual  aberration  stage,  and  9  and  10  result  from  Method 
2.  Method  1,  which  is  not  considered  here,  gives  rise  to  more  terms. 

Thus  the  second-order  corrections  /  and  /'  are  such  that  the  corrections  to  right 
ascension  and  declination  are  7tan2<5  and  J'tantf,  respectively.  They  are  derived 
from  the  most  significant  terms,  i.e.,  terms  3,  5,  and  9,  given  in  Table  3.344.1,  and 
replacing  sec  8  by  ±  tan  8,  with  an  error  that  vanishes  at  the  poles.  This  gives 

J  =  +[g  sin  (G+a)±h  sin  (H  +  a)]  [g  cos  (G  +  a)±h  cos  (H  +  a)] 
■  +[(A  +  D)  sin  a  +  (B±C)  cos  a]  [(A  ±  D)  cos  a  —  (B±C)  sin  a], 

J'  =  --|[gsin{G  +  a)±h  sin  (H  +  a)f 

=  -l-[(A±D)  sin  a  +  (B±Q  cos  a]2,  (3.344-1) 

the  upper  sign  being  taken  for  positive  declinations,  and  the  lower  sign  for  negative 
declinations.  The  expressions  for  second-order  terms  and  J  and  /  assume  that  /,  g, 
h  are  measured  in  radians,  and  J  must  be  divided  by  15  to  be  converted  to  seconds 
of  time. 

These  second-order  day  numbers  J  and  f  are  tabulated  in  The  Astronomical 
Almanac  as  simple  functions  of  north  or  south  declinations,  right  ascension,  and 
date,  so  that  the  complete  reduction  may  be  made  in  one  operation. 


160 


EXPLANATORY  SUPPLEMENT 


Table  3.344.2 

Errors  Due  to  Neglecting  Second-Order  Terms 


0:007 

0"008 

0T009 

0XJ10 

0:012 

0:014 

o:oie 

o:ois 

0:020 

0  <  T  <  +1 

5° 

25° 

35° 

43° 

49° 

54° 

57° 

60° 

63° 

57° 

62° 

67° 

70° 

72° 

74° 

76° 

78° 

81° 

The  method  is  of  advantage  in  the  routine  calculation  of  a  number  of  star  places. 
In  particular,  Porter  and  Sadler  (1953)  clearly  show  the  advantages  of  restricting 
the  range  of  r  to  ±  0. 5;  this  has  the  effect  of  reducing  all  the  second-order  terms 
in  /  and  g,  which  are  functions  of  time.  A  more  detailed  analysis  of  the  magnitude 
of  the  neglected  terms  in  different  methods  has  confirmed  the  conclusion  that  if 
t  is  allowed  to  reach  +1,  and  no  second-order  corrections  are  applied,  there  are 
unavoidable  errors  of  O'.'OIO,  even  at  declinations  of  45°.  If  t  is  restricted  to  ±  0.5, 
and  the  J  and  J'  terms  are  included,  then  the  maximum  error  reduces  to  0"003,  and 
the  range  of  declinations  over  which  second-order  corrections  may  be  neglected  is 
correspondingly  increased. 

Table  3.344.2  gives  the  upper  limit  of  declination  for  a  given  error  when  no 
second-order  terms  are  applied. 


3.35  Topocentric-Place  Algorithm 

The  topocentric  place  of  a  star  or  planet  refers  to  its  apparent  direction  as  it  would 
actually  be  observed  from  some  place  on  Earth,  neglecting  atmospheric  refraction. 
The  apparent  place,  developed  in  Sections  3.31  and  3.32,  can  be  thought  of  as  the 
apparent  place  of  an  object  for  a  fictitious  observer  located  at  the  center  of  a  trans- 
parent nonrefracting  Earth.  The  difference  between  the  apparent  and  topocentric 
place  is  due  to  the  slightly  different  position  and  velocity  of  an  observer  on  the 
Earth's  surface  compared  with  those  of  the  fictitious  observer  at  the  Earth's  center. 
The  change  in  direction  of  the  observed  body  due  to  the  difference  of  position  is 
referred  to  as  geocentric  parallax,  and  is  significant  only  for  objects  in  the  solar  sys- 
tem. It  is  typically  a  few  arcseconds  for  most  solar-system  bodies,  but  reaches  about 
1°  for  the  Moon.  The  change  in  direction  due  to  the  difference  in  velocity  (due  to 
the  rotation  of  the  Earth)  is  referred  to  as  diurnal  aberration,  and  is  independent 
of  the  distance  of  the  observed  body,  and  is  always  less  than  0'.'32. 

Atmospheric  refraction  also  affects  the  apparent  direction  of  celestial  objects. 
In  fact,  refraction  at  all  wavelengths  is  orders  of  magnitude  larger  than  either  geo- 
centric parallax  or  diurnal  aberration.  Refraction  is  discussed  in  Section  3.28,  and 


3  /  CELESTIAL  REFERENCE  SYSTEMS  161 

as  it  is  usually  considered  a  correction  to  observations  rather  than  an  effect  to  be 
taken  into  account  when  computing  a  topocentric  place,  it  is  not  considered  here. 

The  simplest  way  of  computing  a  topocentric  place  is  to  compute  an  apparent 
place  using  the  position  and  velocity  vectors  of  the  observer  rather  than  the  center 
of  mass  of  the  Earth.  That  is,  modify  the  barycentric  vectors  EB(f)  and  Eb(0  by 
adding  the  position  and  velocity  of  the  observer  relative  to  the  center  of  the  Earth, 
see  Step  h.  This  procedure  is  equally  applicable  to  stars  and  solar-system  objects. 
The  development  that  follows  requires  quantities  related  to  precession  and  nutation 
that,  in  the  computation  of  geocentric  apparent  places,  are  not  needed  before  Step 
q.  These  quantities  should  be  computed,  used  here,  and  saved  for  later  use;  they 
are  specifically  noted  as  they  arise. 


3.351    Location  and  Universal  Time  of  the  Observation 

Step  a:  Determine  the  universal  time  of  observation,  specifically,  the  epoch  of 
observation  in  the  UT1  timescale.  UT1  is  affected  by  unpredictable  irregularities 
in  the  Earth's  rotation,  but  is  always  within  0?9  of  UTC,  the  latter  defining  civil 
time  and  broadcast  worldwide  according  to  international  convention.  The  difference 
AUT  =  UT1  —  UTC  is  determined  and  distributed  by  the  International  Earth 
Rotation  Service.  The  predicted  value  of  AUT  to  within  011  (denoted  DUT)  is  also 
coded  into  UTC  broadcasts.  (See  Section  2.24.) 

Step  b:  Obtain  r  (in  meters),  the  position  vector  of  the  observer  in  an  Earth- 
fixed,  geocentric,  right-handed  coordinate  system,  with  the  jcy-plane  the  Earth's 
equator,  the  jcz-plane  the  Greenwich  meridian,  and  the  z-axis  pointed  toward  the 
north  terrestrial  pole.  In  terms  of  the  observer's  geodetic  latitude  <f>,  longitude  A 
(east  longitudes  positive),  and  height  h  above  the  Earth's  reference  ellipsoid  [for 
most  purposes  the  height  above  mean  sea  level  (the  regional  geoid)  can  be  used],  r 
is  given  by 

"(flC  +  A)cos<pcos  A" 
r=    {aC  +  h)  sin  4>  sin  \    ,  (3.351-1) 
(aS  +  h)  sin  (p 

where  a  is  the  equatorial  radius  of  the  Earth, 

C  =  (cos  <f>2  +  ( 1  -  f)2  sin2  <t>T  "2,       S  =  ( 1  -  f)2C,  (3.35 1-2) 


and  /  is  the  adopted  flattening  of  the  Earth's  reference  ellipsoid.  The  IAU  (1976) 
constants  are  a  =  6378 140  m  and  /  =  1  /  298. 257. 


162  EXPLANATORY  SUPPLEMENT 

3.352    Apparent  Sidereal  Time  at  the  Epoch  of  Observation 


Step  c:  Use  Step  s  of  Section  3.319  to  obtain  the  two  fundamental  nutation  angles, 
Aip  and  Ae,  and  the  mean  (e0)  and  true  (e)  obliquity  of  the  ecliptic.  Save  all  these 
quantities  for  later  use. 

Step  d:  Using  the  UT1  epoch  of  observation  as  the  argument,  compute  the  Green- 
wich mean  sidereal  time  9m 


8m  =  67310!54841  +  (876600h  +  8640184?812866)7; 
+  0^093104  Tl  -  6*2  x  \0~6Tf, 


(3.352-1) 


where  Tu  is  the  number  of  centuries  of  36525  days  of  universal  time  from  2000 
January  1,  12h  UT1  ( JD  2451545.0  UT1).  The  Greenwich  apparent  sidereal  time  is 
then 

9  =  8m  +  Atp  cos  e,  (3.352-2) 

where  9m  and  must  be  in  the  same  units.  Greenwich  mean  and  apparent 
sidereal  time  are  the  angles  between  the  Greenwich  meridian  and  the  mean  and 
true  equinoxes  of  date,  respectively,  and  with  the  equation  of  the  equinoxes  (Sec- 
tion 3.223}  are  tabulated  daily  at  0h  UT1  in  the  The  Astronomical  Almanac. 

3.353    Geocentric  Position  and  Velocity  Vectors  of  the  Observer 

Step  e:  Compute  the  geocentric  position  and  velocity  vectors  of  the  observer,  with 
respect  to  the  true  equator  and  equinox  of  date,  in  meters,  and  meters/second, 
respectively,  from 


Btt  =  R3(-0)Ri(y,)R2(*P)r, 

g(f)  =  wk  a  g(f) 

—  sin  8    -  cos  8  0 
cos  6    —  sin  9  0 
0  0  0 


Ri(y/,)R2(V, 


(3.353-1) 


(3.353-2) 


where  w  =  7.  2921 151467  x  10~5  radians/second  (Aoki  et  al,  1982)  is  the  standard 
value  of  the  rotational  angular  velocity  of  the  Earth,  6  is  the  Greenwich  apparent 
sidereal  time  at  the  time  of  observation,  calculated  in  Step  d,  and  k  is  a  unit 
vector  pointing  toward  the  north  Celestial  Ephemeris  Pole  of  date.  The  angles  xp, 
yp  correspond  to  the  coordinates  of  the  Celestial  Ephemeris  Pole  with  respect  to 
the  terrestrial  pole  measured  along  the  meridians  at  longitude  0"  and  270°  (90° 
west)  (see  Section  3.27). 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1  63 

The  preceding  expressions  take  into  account  polar  motion,  which  affects  the 
components  of  the  observer's  geocentric  position  vector  at  the  10-meter  (0'.'3)  level, 
and  may  be  neglected  if  desired  by  replacing  TH\(yp)  and  RiCfp)  by  unit  matrices.  Ne- 
glecting polar  motion  affects  the  computed  topocentric  place  of  the  Moon  by  several 
rnilliarcseconds,  with  a  much  smaller  effect,  inversely  proportional  to  distance,  for 
other  bodies.  If  effects  at  this  level  are  important,  corrections  are  also  required  to 
refer  the  regional  geoid  (the  coordinate  system  for  the  observer's  geodetic  latitude, 
longitude,  and  height)  to  the  Earth's  reference  ellipsoid.  In  forming  the  velocity  of 
the  observer  a  standard  value  for  the  rotation  rate  of  the  Earth  has  been  used,  and 
the  small  effects  due  to  the  variation  in  rate  from  this  value  and  due  to  the  change 
of  the  polar  motion  components  have  been  ignored. 

More  information  on  the  computation  of  an  observer's  geocentric  coordinates 
are  given  in  Section  K  of  The  Astronomical  Almanac,  Mueller  (1969),  Taff  (1981), 
as  well  as  Chapter  4. 

Step  f:  Convert  the  geocentric  position  and  velocity  vectors  to  units  of  AU  and 
Au/day,  respectively,  by  multiplying  g(/)  by  1 1 A  and  g(t)  by  86400  /  A,  where  A  = 
1.49597870  x  10n  is  the  number  of  meters  in  1  au  (IAU  (1976)). 

3.354    Position  and  Velocity  of  the  Observer  in  the  Space-Fixed  Frame 

Step  g:  Transform  the  vector  g(/)  and  g(f)  to  the  coordinate  system  defined  by  the 
Earth's  mean  equator  and  equinox  of  the  reference  epoch  to,  which  is  the  space-fixed 
coordinate  system  in  which  the  position  and  velocity  of  the  Earth  are  expressed: 

G(f)  =  P-'N"1  g(0  =  PTNT  g(f)  =  RT  g(r), 

G(f)  =  P-'N-1  g(f)  =  PTNTg(0  =  RT  g(r),  (3.354-1) 

where  P  and  N  are  the  precession  and  nutation  matrices,  developed  in  Steps  q  and 
s  in  Sections  3.318  and  3.319.  Here  the  inverse  matrix  is  simply  its  transpose.  The 
most  efficient  procedure  would  be  to  evaluate  the  elements  of  these  matrices  at 
this  point  and  save  them  for  later  use  in  Steps  r  and  t.  Steps  (q)  and  (s)  could  be 
skipped. 

Strictly,  the  precession  and  nutation  matrices  define  a  transformation  between 
a  space-fixed  system  and  a  slowly  rotating  system.  The  slow  rotation  is  the  chang- 
ing orientation  of  the  Earth's  axis  due  to  external  torques  that  the  precession  and 
nutation  theories  describe.  Therefore  the  conversion  of  the  observer's  velocity  given 
in  Equation  3.354-1  is  missing  a  Coriolis  term.  However,  the  equivalent  linear  ve- 
locity of  this  rotation  is  of  order  10-5  m/second  for  an  observer  on  the  surface  of 


164  EXPLANATORY  SUPPLEMENT 

the  Earth,  comparable  to  the  tracking  velocity  of  large  telescopes  and  completely 
negligible. 


3.355    Barycentric  Position  and  Velocity  of  the  Observer 

Step  h:  Calculate  the  barycentric  position  and  velocity  of  the  observer  Ob(0  and 
0B(f),  by  adding  vectors  G(f)  and  G(r),  obtained  above,  representing  the  geocentric 
position  and  velocity  of  the  observer,  to  EB(f)  and  EB(r),  obtained  in  Step  f  of 
Section  3.31,  which  represents  the  barycentric  position  and  velocity  of  the  Earth, 
thus 

Ob  =  EBW  +  G(f), 

OB  =  EB(0  +  G(0.  (3.355-1) 

Then  redefine  the  vectors  EB(f)  and  EB(/)  to  be  identical  to  OB(0  and  6B(/). 

Step  i:  Continuing  at  Step  g  in  Section  3.31,  the  other  steps  follow  as  before, 
except  that  the  elements  of  the  precession  and  nutation  matrices  need  not  be  re- 
computed in  Steps  q  and  s. 

The  right  ascension  a  and  declination  6  obtained  at  Step  u  represent  the 
topocentric  place  of  the  object  at  the  epoch  of  observation.  The  topocentric  hour 
angle  of  the  object  is  given  by  LHA  =  0  +  X  -  a,  where  objects  west  of  the  meridian 
(setting)  have  positive  hour  angles. 

In  many  cases,  the  previous  procedure  may  be  simplified,  but  most  care  is 
needed  for  objects  in  the  inner  solar  system  when  the  highest  precision  is  required. 
For  objects  beyond  the  inner  solar  system,  to  milliarcsecond  precision,  nutation 
can  be  ignored  throughout.  That  is,  mean  sidereal  time  can  be  used  instead  of 
apparent  sidereal  time  (the  equation  of  the  equinoxes  can  be  considered  zero)  and 
the  nutation  rotation  matrix  in  Equations  3.354-1  can  be  neglected  (i.e.,  N  can  be 
considered  the  unit  matrix).  Additionally,  the  difference  between  UT1  and  UTC 
timescales  can  be  ignored.  However,  these  simplifications  may  not  result,  in  any  real 
computational  saving.  The  nutation  parameters  would  have  to  be  calculated  anyway 
in  a  later  step.  Furthermore,  these  simplifications  affect  the  computed  sidereal  time 
at  the  1"  level,  and  will  therefore  cause  errors  in  the  computed  topocentric  hour 
angle  of  this  magnitude.  Therefore,  in  many  cases,  carrying  out  the  full  procedure, 
and  saving  the  values  of  the  relevant  nutation  and  time  variables  for  later  use,  may 
be  the  most  prudent  course. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 

3,4    DIFFERENTIAL  ASTROMETRY 


165 


For  differential  astrometric  measurement,  the  algorithms  in  Sections  3.31  and  3.32 
can  be  simplified.  In  differential  work  it  is  necessary  to  consider  only  effects  that 
can  alter  the  angles  between  the  position  vectors  of  the  observed  bodies,  i.e.,  arc 
lengths  on  the  celestial  sphere.  The  orientation  of  the  coordinate  system  is  not 
considered  of  fundamental  importance,  since  in  most  cases  the  celestial  and  instru- 
mental coordinate  systems  are  coupled.  In  any  event,  in  differential  observing,  the 
coordinate  system  is  not  established  until  after  the  fact,  during  the  reduction  of  the 
observations. 

There  are  three  types  of  differential  positions:  the  virtual  place,  the  local  place, 
and  the  astrometric  place.  For  the  reduction  of  high-precision  differential  observa- 
tions, the  local  place  should  be  used.  With  available  computing  power,  it  is  straight- 
forward to  compute  the  local  place  of  all  objects  within  a  field  and  use  the  ensemble 
of  local  places  as  the  starting  point  for  the  reduction  procedure. 

3.41  Virtual  Place 

The  virtual  place  can  be  thought  of  as  an  apparent  place  expressed  in  the  coordinate 
system  of  the  reference  epoch  f0-  It  represents  the  position  of  the  star  or  planet  as  it 
would  be  seen  from  the  center  of  mass  of  the  Earth  at  some  date,  in  the  coordinate 
system  defined  by  the  Earth's  mean  equator  and  equinox  of  the  reference  epoch, 
assuming  that  the  Earth  and  its  atmosphere  were  transparent  and  nonrefracting. 

For  the  reduction  of  high-precision  differential  astrometric  observations,  there- 
fore, the  final  precession  and  nutation  rotations  need  not  be  performed,  and  Equa- 
tions 3.31-1  and  3.32-1  reduce  to,  respectively, 

u4(r')  =  /u?[uB(/  -t)-  EB(/)]],  (3.41-1) 
and    U4<'')  =  / lg[uB('o)  +  ('  -  'o)UB(fo)  -  EB(0]L  (3.41-2) 

where  all  the  symbols  have  been  defined  in  Sections  3.31  and  3.32.  The  resulting 
position  is  called  the  virtual  place  and  is  computed  by  following,  in  Section  3.31, 
Steps  a  through  p,  then  setting  Oj  =  u2  and  skipping  to  Step  u,  or  equivalently  for 
stars,  in  Section  3.32,  Steps  1  through  7,  and  Step  10  where  114  =  u2-  The  omission  of 
the  final  precession  and  nutation  rotations  does  not  introduce  any  approximations 
or  distortions,  since  only  orthogonal  transformations  are  omitted. 

3.42  Local  Place 

The  local  place  is  essentially  the  topocentric  place  expressed  in  the  coordinate 
system  of  the  reference  epoch  f0.  Local  place  is  related  to  topocentric  place  in  the 


1  §6  EXPLANATORY  SUPPLEMENT 

same  way  that  the  virtual  place  is  related  to  apparent  place.  Specifically,  the  local 
place  represents  the  position  of  a  star  or  planet  as  it  would  be  seen  from  a  specific 
location  on  Earth  at  some  date  and  time,  in  the  coordinate  system  defined  by  the 
Earth's  mean  equator  and  equinox  of  the  reference  epoch,  assuming  the  atmosphere 
were  nonrefracting.  To  compute  it,  simply  add  the  procedure  for  calculating  the 
topocentric  place  (Section  3.35)  to  the  procedure  for  computing  the  virtual  place 
(Section  3.41).  (Note:  The  precession  and  nutation  rotations  in  Section  3.354  should 
not  be  omitted.)  The  local  place  has  utility  beyond  its  use  in  relative  astrometry. 


3.43   Astrometric  Place 

In  differential  work  it  has  also  been  customary,  if  not  strictly  correct,  to  neglect 
both  the  gravitational  deflection  of  light  (function  g[...])  and  the  aberration  of  light 
(function /[...]).  The  assumption  is  that  for  sufficiently  small  fields  these  differential 
effects  are  so  small  that  the  relative  positions  of  objects  remain  unaffected.  Similarly 
differential  refraction  is  ignored,  although  its  effect  could  be  much  larger  because 
of  the  variation  in  color  over  the  same  fields.  Any  residual  distortion  of  the  field 
resulting  from  the  neglect  of  these  effects  is  assumed  to  be  absorbed  into  plate 
constants  or  similar  parameters  solved  for  in  the  data-reduction  process. 

The  astrometric  place  of  the  planet  or  star  is  obtained  from  Equations  3.31-1 
and  3.32-1,  which  reduce  to 

u4(/')  =  unit  -  <rj—  EB(f)  (3.43-1 ) 

and    u4(f')  =  uB(f0)  +(/ -  fo)uB(fo)  -  EB(r),  (3.43-2) 

and  is  obtained  by  following,  in  Section  3.31,  Steps  a  through  1,  or  equivalently  for 
stars,  Steps  1  through  5,  then  setting  u4  =  U  and  skipping  to  the  last  step. 

However,  it  should  be  recognized  that  the  gravitational  deflection  of  light  should 
not  really  be  ignored  in  this  way,  since  it  cannot  in  principle  be  absorbed  into  plate 
constants  or  similar  reduction  parameters:  the  deflection  is  a  function  of  position 
and  distance.  Although  in  any  part  of  the  sky  the  direction  of  the  deflection  is  the 
same  for  all  bodies,  its  magnitude  is  less  for  solar-system  bodies  than  for  stars  (see 
Figure  3.26.2).  Generally,  this  detail  is  of  little  practical  importance,  since  only  in 
a  few  special  cases  can  it  cause  errors  exceeding  0"01. 

Astrometric  places  are  simple  to  compute,  and  therefore  have  been  widely  used. 
Another  attractive  feature  is  that  they  can  be  directly  plotted  on  an  ordinary  star 
map  with  negligible  error  in  the  resulting  field  configuration.  Astrometric  places 
are  therefore  used  for  the  ephemerides  of  faint  or  fast-moving  solar-system  bodies, 
such  as  minor  planets  and  Pluto,  in  The  Astronomical  Almanac. 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 6/ 

For  observations  of  solar-system  bodies,  it  is  frequently  useful  to  compute  a 
topocentric  astrometric  place.  Only  the  correction  for  geocentric  parallax  is  ap- 
plied. To  compute  a  topocentric  astrometric  place,  simply  add  the  procedure  given 
in  Section  3.35  to  the  procedure  given  above  for  computing  an  astrometric  place. 
(Again,  the  precession  and  nutation  rotations  in  Section  3.354  should  not  be  omit- 
ted). In  this  case,  however,  the  observer's  velocity  vector  need  not  be  computed, 
since  aberration  is  ignored.  Topocentric  astrometric  places  of  stars  are  never  re- 
quired, since  the  topocentric  correction  is  vanishingly  small. 

Before  1984,  the  effects  of  the  E-terms  of  aberration  were  omitted;  a  detailed 
discussion  on  them  is  given  in  Section  3.53.  Also,  in  the  past  the  term  "astrographic" 
place  was  used  instead  of  astrometric  place. 


3.5   TRANSFORMATION  TO  FK5  SYSTEM  AND  EPOCH  J2000.0 

Expressions  are  given  for  converting  both  observational  and  compiled  catalogs  from 
the  old  FK4  reference  system  of  B1950.0  to  the  new  FK5  reference  system  of 
J2000.0.  A  detailed  discussion  of  the  formal  background  is  also  given. 


3.51    FK4  Zero-Point  Correction  in  Right  Ascension 

An  early  discussion  of  the  problem  of  the  position  and  motion  of  Newcomb's  equinox 
and  the  FK4  equinox  can  be  found  in  Blackwell  (1977).  Later,  it  was  determined  by 
Fricke  (1982)  that  the  FK4  right-ascension  system  requires  a  correction  of  +0?035 
at  B1950.0,  This  has  been  referred  to  as  an  equinox  correction.  It  implies  that  the 
right  ascension  of  every  star  in  any  catalog  whose  right  ascensions  are  referred  to 
the  system  of  FK4  at  epoch  and  equinox  B1950.0  must  be  increased  by  4O!035.  The 
motion  of  the  equinox  of  +0?085  /  cy.  Fricke  (1982)  and  the  correction  to  lunisolar 
precession  of  +l"10/cy  Fricke  (1977)  implies  that  the  FK4  system  has  a  rotation 
in  right  ascension  relative  to  our  present  best  realization  of  an  inertial  system  of 
(Of 085  —  1 '.'  1 0)  per  century.  This  has  been  corrected  in  the  FK5  by  altering  the 
proper  motions  by  O!085/cy  and  precession  by  l'.'10/cy. 

The  equinox  correction  at  any  epoch,  T,  given  as  a  function  of  its  value  at 
B1950.0  and  the  difference  in  epoch  (T  -  7b),  has  been  given  by  Fricke  (1982)  as 
follows: 

E(T)  =  0!035  +  0!085(F  -  T0)  1 36524. 2198782,  (3.51-1 ) 

where  T  is  the  Julian  date  at  any  epoch  and  To  is  the  Julian  date  corresponding 
to  the  beginning  of  the  Besselian  year  B1950.0,  i.e.,  7*0  =  2433282.42345905.  We 
suppose  that  the  divisor  of  the  epoch  difference  should  be  the  number  of  Julian 


1 68  EXPLANATORY  SUPPLEMENT 

days  per  tropical  century,  but  no  significant  error  is  made  if  the  number  of  Julian 
days  per  Julian  century  (36525)  is  adopted  instead. 

Aoki  et  al.  (1983)  have  made  a  convincing  argument  that,  for  the  sake  of  consis- 
tency with  the  new  definition  of  UT  introduced  at  0h  UT  on  1984  January  1  (Aoki 
et  al,  1982),  it  is  important  that  the  FK4  equinox  correction  should  be  applied  to 
right  ascensions  of  the  FK4  catalog  referred  to  the  same  equinox  and  epoch  (1984 
January  1)  as  the  date  on  which  the  new  definition  went  into  effect.  The  equinox 
correction  corresponding  to  that  epoch  is  accordingly, 

£(2445700. 5)  =  +0^06390.  (3.5 1-2) 

The  reduction  to  the  IAU  1976  system  of  constants  at  J2000.0  of  the  right-ascension 
system  of  an  observational  catalog  (as  distinct  from  a  compiled  catalog)  referred 
to  the  FK4  system  at  an  arbitrary  equinox  and  at  the  mean  epoch  of  observation 
should  be  done  in  a  manner  consistent  with  the  way  in  which  the  catalog  was 
referred  to  the  system  of  FK4  at  the  time  of  observation.  On  the  other  hand,  if  an 
observational  catalog  has  been  constructed  from  a  fundamental  treatment  of  the 
observations  of  solar-system  objects  and  thus  referred  to  the  observed  dynamical 
equinox,  the  reduction  to  the  IAU  1976  system  of  constants  at  J2000.0  would  ignore 
the  zero-point  correction  normally  required  by  the  FK4  system  in  right  ascension. 

3.52  The  Correction  to  the  FK4  Proper  Motion  System  in  Right  Ascension 

The  existence  of  a  secular  term  of  the  form  0?085(r  -  T0)  I  36524.2198782  in  the 
equinox  correction  has  generally  been  interpreted  as  a  constant,  nonprecession- 
dependent  correction  applicable  to  the  FK4  right-ascension  proper-motion  system 
(Fricke  1982).  This  implies  that  at  any  epoch,  and  regardless  of  the  equinox,  all 
right-ascension  proper  motions  of  the  FK4  catalog  (or  any  catalog  with  the  proper 
motions  referred  to  the  FK4  system)  must  be  increased  by  +0!085  per  tropical 
century. 

The  nonlinear  character  of  precession  viewed  as  a  mathematical  operation  sug- 
gests that  subtle  differences  can  be  introduced  into  a  catalog  transformation  from 
one  epoch  and  equinox  to  another,  depending  on  the  epoch  at  which  corrections 
are  introduced.  A  number  of  possibilities  come  to  mind.  One  could,  for  example, 
apply  the  corrections  to  positions  and  proper  motions  referred  to: 

(1)  the  epoch  and  equinox  of  the  beginning  of  1984;  or 

(2)  the  epoch  and  equinox  of  B1950.0;  or 

(3)  the  epoch  and  equinox  of  the  mean  epoch  of  observation. 


Among  these  three  options,  the  third  one  most  closely  approximates  the  op- 
eration that  would  have  been  carried  out  if  the  improved  IAU  1976  system  had 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 69 

been  available  at  the  time  of  observation.  In  the  case  of  individual  observational 
catalogs,  such  as  the  series  of  fundamentally  observed  Washington  Six-inch  Transit 
Circle  catalogs,  the  reduction  to  the  FK5  equinox  is  best  done  by  directly  calculat- 
ing the  difference  FK5-Catalog  from  the  stars  in  common  to  both  catalogs. 


3.53   Elliptic  Terms  in  Aberration 

3,531  Effect  on  Position  Recommendation  4  of  IAU  1976  Resolution  No.  1  indi- 
cates that  from  1984  onward,  stellar  aberration  is  to  be  computed  from  the  total 
velocity  of  the  Earth  referred  to  the  barycenter  of  the  solar  system,  and  mean 
catalog  places  are  not  to  contain  elliptic  terms  of  aberration. 

The  problem  of  reducing  observational  catalogs  to  a  uniform  system  is  compli- 
cated by  the  change  in  the  conventional  value  of  the  constant  of  aberration,  which 
since  1911  had  been  taken  as  20'.'47  (Paris  conference,  1911),  and  from  1968  has  been 
taken  as  20'.'496  (IAU  1967).  Before  1911,  the  value  of  Struve  and  Peters,  20"4551, 
was  in  common  use,  and  from  1984  the  value  of  20'.'49552  has  been  introduced  as 
the  conventional  value. 

Reduction  to  a  uniform  system  is  further  complicated  by  changes  in  the  method 
of  computing  the  aberrational  day  numbers,  C  and  D,  given  in  the  national  ephem- 
erides  and  almanacs.  Before  1960,  the  aberrational  day  numbers  C  and  D  were 
calculated  from  a  circular  approximation  to  the  motion  of  the  Earth  in  which  small 
periodic  terms  due  to  the  action  of  the  Moon  and  planets  and  the  elliptic  terms  in 
aberration  were  neglected  (see  Explanatory  Supplement,  p.  48ff.). 

Beginning  with  1960,  the  aberrational  day  numbers  C  and  D  were  derived 
from  the  true  velocity  of  the  Earth  referred  to  the  center  of  mass  of  the  solar 
system  and  to  a  dynamically  determined  frame  of  reference.  The  elliptic  terms  in 
aberration  due  to  the  eccentricity  of  the  Earth's  orbit  were  then  removed  from  an 
otherwise  completely  correct  expression  of  the  annual  aberration.  Furthermore,  as  of 
1960,  ephemeris  values  of  the  aberrational  day  numbers  properly  reflect  the  slowly 
changing  eccentricity  and  longitude  of  perihelion  of  the  Earth's  orbit  (Explanatory 
Supplement,  p.  158ff.). 

When  one  is  working  with  individual  observational  catalogs,  reductions  to  a 
uniform  system  of  annual  aberration  should  take  into  account  the  changes  in  the 
value  of  the  constant  of  aberration  and  the  method  of  calculation  of  the  published 
values  of  the  aberrational  day  numbers,  C  and  D.  This  will  adjust  the  published 
values  of  the  observed  positions  in  a  manner  consistent  with  conventions  in  use  at 
the  time  the  observations  were  made  and  reduced  from  apparent  to  mean  place. 
If  this  procedure  is  not  followed,  then  corrupted  data  will  be  produced,  and  the 
potential  for  systematic  improvement  will  be  diminished. 

The  FK4  catalog,  and  other  fundamental  catalogs  such  as  the  N30  (Morgan, 
1952)  and  the  General  Catalog  (Boss  1937),  were  compiled  from  observations  made 
prior  to  1960,  when  a  circular  approximation  was  made  to  the  motion  of  the  Earth 


1  70  EXPLANATORY  SUPPLEMENT 

in  its  orbit,  and  the  elliptic  terms  in  aberration  were  ignored,  except  for  stars  within 
10°  of  the  poles  in  the  case  of  the  FK4  catalog. 

Due  to  the  rapid,  daily  change  in  the  value  of  the  circular  component  of  an- 
nual aberration,  it  is  not  possible  to  correct  mean  positions  for  changes  that  have 
occurred  in  the  adopted  value  of  the  constant  of  aberration  either  in  the  compiled 
fundamental  catalogs  or  in  observational  catalogs  of  mean  positions.  Observations 
of  solar-system  objects  are  normally  given  on  a  daily  basis  and  may  be  corrected 
with  a  high  degree  of  rigor.  However,  because  the  elliptic  terms  in  aberration  change 
so  very  slowly,  their  influence  can  be  removed  from  the  FK4  catalog  positions  by 
subtracting  the  elliptic  terms  in  aberration  from  the  catalog  right  ascension  and 
declination  (aeat,  6cat)  to  obtain  the  corrected  right  ascension  and  declination  (a,  6) 
as  follows: 

a  =  acat  -  (ACcos  acM  +  AD  sin  mm)  I  (15  cos  4at), 

<5  =  6cat  -  ( AD  cos  acat  -  AC  sin  acat)  sin  <5cat  -  ACtan  ecos  6cat,  (3.531-1) 

where  AC  =  -0"065838,  AD  =  +0:'335299,  and  ACtane  =  -01'028553  at  epoch 
B1950.0,  using  the  J2000.0  value  of  the  constant  of  aberration. 

These  equations  represent  the  classical  elliptic  aberration  with  first-order  ac- 
curacy in  the  ratio  of  the  Earth's  velocity  to  the  velocity  of  light  (Woolard  and 
Clemence  1966,  p.  113ff).  More  than  the  necessary  number  of  significant  figures  is 
carried  in  order  to  ensure  correct  rounding. 

For  applications  requiring  accuracies  better  than  1  milliarcsecond  (mas),  the 
discussions  of  Stumpff  (1979,  1980a)  regarding  the  second-order  relativistic  terms 
in  elliptic  aberration  should  be  consulted. 

The  numerical  values  for  AC,  AD,  and  ACtane  given  here  are  not,,  generally 
applicable  to  every  case  in  which  positions  have  been  referred  to  the  equinox  of 
B1950.0.  For  an  observational  catalog  referred  to  an  arbitrary  equinox,  each  position 
(where  right  ascension  and  decimation  must  be  treated  separately  if  their  mean 
epochs  of  observation  are  not  the  same)  may  be  precessed  to  the  equinox  of  the  mean 
epoch  of  observation  and  then  corrected  for  the  elliptic  terms  of  aberration  using 
values  referred  to  the  moving  equinox  (see,  e.g.,  Scott  1964).  Many  observational 
catalogs  will  require  an  epoch-dependent  correction  of  this  type.  Compiled  catalogs 
may  or  may  not  require  a  correction,  depending  on  how  the  compilation  was  done 
(Lederle  and  Schwan,  1984). 

The  time- dependent  expressions  for  the  coefficients  of  Equation  3.531-1  may 
be  written  as  follows  (Woolard  and  Clemence,  1966,  p.  114ff): 


AC  =  —  ke  cos  F  cos  e, 
AD  =  —  kesinT, 


(3.531-2) 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 71 

wnere  k  =  20'.'49552  is  the  constant  of  aberration  at  J2000.0, 
e  -  Eccentricity  of  the  Earth's  orbit 

a  0. 0167301 1  -  0. 00004193(7  -  7b)  -  0. 000000126(7  -  7b)2, 
T  =  Mean  longitude  of  perigee  of  the  solar  orbit 

=  282°04'49,.,951  +  619Q':67(7  -  7b)  +  1"65(7  -  T0f  +  0'.'012(r  -  70)3, 
e  =  Obliquity  of  the  ecliptic 

=  23°26'44:'836  -  46'.'8495(r  -  T0)  -  0'.'00319(7  -  T0f  +  0'.'00181(7  -  7b)3, 

where  (T  -  To)  is  in  units  of  Julian  centuries  of  36525  days  and  7b  is  the  epoch 
B1950.0  (2433282.42345905).  Equation  3.531-2  has  been  developed  from  ES,  p.  98, 
and  may  be  used  to  refer  Equation  3.531-1  to  any  epoch  of  observation  relative  to 
the  moving  (i.e.,  of  date)  equinox. 

For  recently  observed  Washington  catalogs,  such  as  the  W5(50)  Six-inch .Tran- 
sit Circle  Catalog  (1963-1971)  (Hughes  and  Scott  1982)  and  the  WL(50)  Seven-inch 
Transit  Circle  Catalog  (1967-1973)  (Hughes,  Smith,  and  Branham,  in  press)  ob- 
served from  El  Leoncito  in  San  Juan,  Argentina,  the  assumed  constant  of  aberration 
used  in  the  apparent  place  computations  was  20"496.  The  W6(50)  Six-inch  Transit 
Circle  Catalog  (1973-1982)  (currently  under  discussion)  will  be  re-reduced  in  strict 
accordance  with  the  IAU  1976  resolution,  and  will  be  renamed  to  reflect  J2000.0  as 
the  equinox  to  which  it  will  be  referred. 


3.532  Effect  on  Proper  Motion  Aoki  et  al.  (1983),  introduce  a  correction  to  the 
proper  motions  to  compensate  for  a  secular  change  of  the  elliptic  aberration  asso- 
ciated with  the  variation  of  the  eccentricity  of  the  Earth's  orbit,  of  the  longitude  of 
solar  perigee,  and  of  the  obliquity  of  the  ecliptic  with  time.  Lederle  and  Schwan  re- 
mark that  this  is  unnecessary  because  of  the  practice  followed  in  the  compilation  of 
FK4  proper  motions  by  which  differences  in  right  ascension  and  declination  between 
observed  positions  and  positions  computed  on  the  basis  of  the  FK3  were  used.  In 
fact,  the  problem  is  complicated  by  the  practice  of  having  eliminated  the  influence 
of  elliptic  aberration  for  circumpolar  stars  before  precessing  to  a  new  equinox  and 
epoch,  and  then  re-introducing  the  effect  of  elliptic  aberration  appropriate  for  the 
new  equinox  and  epoch.  This  was  not  done  for  the  stars  between  +80°  and  -80° 
declination  (FK3,  1937;  FK4,  1963),  which  means  that  no  single  practice  will  work 
equally  well  or  consistently  for  all  stars  of  the  FK4,  nor  for  any  catalogs  referred  to 
the  FK4  system.  Corrections  for  the  secular  change  of  elliptic  terms  in  aberration 
are  not  necessary  for  proper  motions  of  circumpolar  FK4  stars,  but  a  correction  is 
required  for  FK4  stars  between  +80°  and  —80°. 

A  very  good  case  can  be  made  that  the  highest-accuracy  transformation  of 
the  FK4  catalog  to  the  equinox  of  J2000.0  would  result  if  the  procedure  outlined 


1  '  '  EXPLANATORY  SUPPLEMENT 

above  were  followed  paying  special  attention  to  the  treatment  of  the  stars  as  regards 
the  elliptic  terms  in  aberration.  Stars  within  10°  of  the  poles  need  have  only  the 
elliptic  terms  in  aberration  at  B1950.0  removed  from  their  positions.  Their  proper 
motions  need  no  modification.  For  stars  between  +80°  and  -80°  in  declination,  the 
positions  and  proper  motions  should  be  precessed  to  the  equinox  of  the  mean  epoch 
of  observation  and  the  elliptic  terms  in  aberration  (referred  to  the  moving  equinox 
of  the  mean  epoch  of  observation  given  by  Equation  3.531-2)  should  be  removed 
from  the  positions.  Equation  3.531-1  may  be  differentiated  with  respect  to  time  to 
give  the  equations  for  the  corrected  proper  motions  (p,pJ)  in  right  ascension  and 
declination  in  terms  of  the  catalog  proper  motions  in  right  ascension  and  declination 
(/^cacMcat)'  and  tne  catalog  positions  (aca[,8cat), 


/'  =  Urn  -  (ACcos  c*ca,  +  AD  sin  o^,)  /  ( 15  cos  <5cat)  (3.532-1 ) 

-  ^caI  sin  1  "(-AC  sin  acaI  +  AD  cos  acal)  /  cos  Sm 

-/4t sin  '"(ACcos  Qcal  + AD  sin  Qcal)  tan  5ca[/(15  cos<5cat), 
=  /4at  -  (ADcosocat  -  ACsin  acal)  sin  6^  (3.532-2) 

-  15/ica,sin  l"(-ADsinocaI  -  ACcos acal) sin Scat 

-  Mcai sin  l"(ADcosQcat  -  ACsin acal) cos  <5ca[ 

-  (ACtan  e  +  ACef  sec2  e)  cos  6cal 
+  1 5  ficat  sin  1  "ACtan  e  sin  6cst, 

where  the  factor  15  converts  arc  to  time  or  vice  versa,  and 

AC  =  +ket r  cos  e  sin  T  -  k(e cos  e  -  eer  sin  e)  cos  f,  (3.532-3) 
AD  s  —ke  sin  T  —  ketr  cos  T, 
AC  tan  e  =  +ketr  sin  e  sin  T  -  k(e  cos  e  -  eir  sin  e)  cos  T  tan  e, 


where  fr  and  lr  are  the  rates  of  change  of  T  and  e  in  radians  per  tropical  century. 

The  quantities  AC,  AD,  ACtan  e  have  to  be  evaluated  in  a  fixed  frame  at 
B1950.0.  To  convert  from  the  rotating  frame  of  date  to  this  fixed  frame,  the  in- 
stantaneous rates  of  change  mo,  no,  and  p0  at  B1950.0  have  to  be  removed  from  the 
displacements  in  right  ascension  (f  cose),  declination  (f  sine),  and  longitude  (f)  due 
to  precession  of  the  mean  longitude  of  perigee. 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 73 

Hence  with 


=  -0.00004193  per  tropical  cy 

mo  =  4609"90  per  tropical  cy 


f  =  —  r|j-=o  =  +6190"54  per  tropical  cy        «o  =  2004"26  per  tropical  cy 
dT 

j  po  =  5026'.'75  per  tropical  cy 

i  =  —  f  |r=o  =  -46'.'8485  per  tropical  cv 
dT 

(3.532^) 

the  numerical  values  for  AC,  AD,  and  ACtan e  in  the  fixed  frame  at  B1950.0  are 


AC  =  -0"001580  per  tropical  century, 
AD  =  -0'.'001245  per  tropical  century, 
ACtan e  =  -0'.'000677  per  tropical  century.  (3.532-5) 


The  equations  for  mo  and  «o  are  given  in  Section  3.214,  and  po  =  mo  cos  e  +  no  sin  e. 


3.54  Precession 

A  detailed  discussion  on  precession  is  given  in  Section  3.21.  The  new  IAU  1976 
precession  angles  are  defined  in  Section  3.211,  and  the  old  Newcomb  angles  are 
discussed  in  Section  3.214. 


3.541  Newcomb's  Precession  The  precessional  motion  of  the  reference  frame  from 
the  equinox  and  equator  of  B1950.0  to  1984  Jan  l"(f  is  calculated  using  Andoyer's 
Equation  3.214-1.  The  adopted  values  are  tabulated  in  the  last  column  of  the  Ta- 
ble 3.214.1.  These  values  were  obtained  with  the  following  time  arguments;  t\  -  0. 1, 
|  =  0. 133999566814,  and  t  =  0.033999566814.  The  resulting  precession  matrix  is 


" +0.999965667560 
+0.007599409535 
+0.003303433846 


-0.007599409538 
+0.999971123992 
-0.000012551554 


-0.003303433841" 
-0.000012553023 
+0. 999994543569 


3.542  The  IAU  1976  Precession  The  precessional  motion  of  the  reference  frame 
from  the  equinox  and  equator  of  1984  Jan  ld0h  to  J2000.0  is  calculated  using  the  IAU 
(1976)  precession  angles  defined  by  Lieske  (1979)  and  and  given  in  Section  3.211. 
The  values  obtained  by  evaluating  these  expressions  with  T  =  -0. 1 600 1 36893  and 


1 74  EXPLANATORY  SUPPLEMENT 

i  s  -T,  and  the  accumulated  angles  from  1984  January  l^O11  to  J2000.U  are  QA  = 
368'.'9985,  zA  =  369"0188,  and  9A  =  320"7279,  and  the  resulting  precession  matrix  is 


+0.999992390029 
+0. 003577999042 
+0. 001554929624 


-0.003577999042 
+0. 999993598937 
-0. 000002781702 


-0. 001554929623" 

-0.000002781855 

+0.999998791092 


3.55  The  Proper-Motion  System 


The  discontinuity  in  the  right-ascension  proper-motion  system  of  the  FK4  catalog 
is  to  be  imposed  at  1984  January  ld0h.  Proper  motions  referred  to  that  equinox  and 
epoch  should: 

(1)  be  corrected  for  the  zero  point  of  the  right- ascension  proper-motion  system 
as  discussed  in  Section  3.52, 

(2)  be  changed  from  the  Newcomb  to  the  IAU  1976  (Lieske  et  al,  1977)  pre- 
cession basis,  and 

(3)  be  expressed  in  units  of  Julian  rather  than  tropical  centuries. 

Only  points  2  and  3  apply  to  the  proper  motions  in  declination. 

The  fundamental  condition  to  be  satisfied  at  1984  January  ld0h  is  that  the 
centennial  variation  on  the  new  basis  shall  equal  the  centennial  variation  on  the  old 
basis  plus  a  constant  correction  in  the  case  of  the  right-ascension  proper  motions: 

^new  —  ^Vold  + 

finew  =  field-  (3.55-1) 


Let  quantities  without  subscripts  be  taken  as  the  new  values  referred  to  the  IAU 
1976  basis,  and  those  with  subscripts  'o'  be  taken  as  referring  to  the  old  (Newcomb) 
basis,  then  in  right  ascension 


fj,  +  m  +  « sin  a  tan  6  = 
and  in  declination 

ft'  +  n  cos  a  - 


(ft0  +  m0  +  no  sin  a0  tan  6q  +  E)  F, 
(fjt'Q  +  n0  cos  oq)  F, 


(3.55-2) 
(3.55-3) 


3  /  CELESTIAL  REFERENCE  SYSTEMS 

where 


175 


are  the  proper  motions  in  right  ascension  and  declination,  respec- 
tively, referred  to  the  IAU  1976  basis  and  precessed  to  1984  January 
ld0h; 

are  the  centennial  general  precession  in  right  ascension  and  decli- 
nation, respectively,  referred  to  the  IAU  1976  basis  at  1984  January 
ld0h; 

are  the  right  ascension  and  declination  for  the  FK4  catalog  pre- 
cessed to  1984  Jan  1; 
=  a0  +  0!06390; 
=  fio; 

_  0!085  per  tropical  century; 

are  the  proper  motions  in  right  ascension  and  declination,  respec- 
tively, from  the  FK4  catalog,  for  example,  and  precessed  to  1984 
January  l"0h; 

are  the  centennial  general  precession  in  right  ascension  and  decli- 
nation, respectively,  referred  to  Newcomb's  precession  at  1984  Jan- 
uary ld0h; 

is  the  factor  for  converting  from  tropical  centuries  to  Julian 
centuries. 

The  quantities  m  and  n  are  calculated  using  the  IAU  1976  precession  (Sec- 
tion 3.211)  and  at  1984  January  ld0h  with  T  =  -0. 1600136893 

m  =  46H'.'98926  /  Julian  century  "  307M65950  /  Julian  century,  and 

n  =  2004"44743  /  Julian  century  =  133!629829  /  Julian  century.  (3.55^1) 

Similarly  mi0  and  n0  may  be  derived  from  the  equations  for  Newcomb's  preces- 
sion in  Section  3.214,  and  at  1984  January  ld0h  with  t\  =0. 13399956681, 

m0  =  4610'.'95218  /  Julian  century  =  307^396812  /  Julian  century,  and 

n0  =  2004'.'01 126  /  Julian  century  =  133*600750  /  Julian  century.  (3.55-5) 

The  values  of  m,  n,  mo,  and  n0  will  be  used  later  in  Section  3.566. 

3.56   Equations  for  the  Transformation  of  Catalogs  from  B1 950.0  to  J2000.0 

This  transformation  is  conversion  from  a  mean  place  to  mean  place.  That  is,  it  trans- 
forms catalog  mean  places  and  proper  motions  from  one  reference  epoch  (B1950.0) 
to  another  (J2000.0).  The  complexity  of  the  transformation  results  from  the  changes 


Mi  M' 
m,  n 

ao,  8q 

a 
6 
E 

M0>  Mo 
mo,  no 
F 


1 76  EXPLANATORY  SUPPLEMENT 

in  constants,  timescales,  and  procedures  mandated  by  the  IAU  for  epoch  J2000.0 
catalog  data. 


3.561  Units  and  the  System  of  Positions  and  Proper  Motions  It  is  assumed  that 
the  positions  and  proper  motions  of  the  catalog  to  be  transformed  to  J2000.0  are 
referred  to  the  epoch  and  equinox  of  B1950.0.  The  positions  are  assumed  to  be 
in  units  of  seconds  of  time  in  right  ascension  and  seconds  of  arc  in  declination. 
However,  when  these  quantities  are  used  as  arguments  of  trigonometric  functions, 
it  is  left  to  the  user  to  express  them  in  degrees  or  radians  as  necessary.  Similarly,  the 
inverse  of  a  trigonometric  function  is  assumed  to  be  degrees.  The  proper  motions 
are  assumed  to  be  in  units  of  seconds  of  time  per  tropical  century  in  right  ascension 
and  seconds  of  arc  per  tropical  century  in  declination.  Radial  velocities  are  taken 
to  be  in  units  of  km/s  and  the  parallaxes  are  in  seconds  of  arc.  It  is  also  assumed 
that  the  catalog  in  question  is  referred  to  the  system  of  the  FK4.  If  not,  steps  must 
be  taken  either  to  refer  the  catalog  to  the  FK4  system  or  to  alter  the  appropriate 
steps  in  the  discussion  which  follows. 

3.562    Elliptic  Aberration     Correct  the  catalog  right  ascension  and  declination  (acat. 
<5Cat)  for  the  elliptic  terms  in  aberration  using  Equations  3.531  1  and  3.531-2.  If 
necessary  correct  the  catalog  proper  motions  for  the  elliptic  terms  in 

aberration  using  Equations  3.532-1  and  3.532-2. 


3.563  Position  and  Velocity  Vectors  (B1950.0  to  1984  Jan  ld0h)  At  the  equinox  and 
epoch  of  B1950.0  form  the  position  vector  m,  and  the  velocity  vector  u,  from  the 
corrected  positions  a  and  6,  the  proper  motions  fi  and  pi  (corrected  if  necessary), 
the  parallax  p,  and  the  radial  velocity  r,  using  Equations  3.23  1  and  3.23-2  given  in 
Section  3.23.  Note  that  to  obtain  the  required  units  of  au/  tropical  century  s  is  the 
conversion  factor  from  seconds  of  arc  to  radians  and  k  =  86400  x  36524.2198782  x 
1.49597870  x  10-8  is  the  conversion  from  km/s  to  AU  per  tropical  century.  Thus 
the  unit  of  u,  is  astronomical  units  (au),  and  Ui  is  in  AU  per  tropical  century. 

The  position  vector  at  epoch  /,  1984  Jan  l"0h  (2445700.5),  but  still  referred  to 
the  equinox  of  B1950.0,  is 

u2(fi)  =  ui(/ti)  +  fin(fi  -  *o),  (3.563-1) 

where  (/,  -  f0)  js  the  number  of  tropical  centuries  between  epoch  t0  (B1950.0)  and 
epoch  f| . 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 77 

3.564   Precession  from  B1950.0to  1984  Jan  ld0h    Apply  the  precession  from  B  1950.0 
to  1984  Jan  ld0h  to  the  vectors  u2(fi)  and  U|,  using  the  precession  matrix  P,  calcu- 
lated from  the  angles      z,  and  6  given  in  Section  3.541.  Then 

u3(f,)  =  PiU2(fi)  (3.564-1) 

and 

u2  =  Piii].  (3.564-2) 

From  the  components  *3,  y3,  z3,  and  x2,  y2,  Zz,  of  the  vectors  u3  and  u2,  respectively, 
calculate  the  right  ascension  and  declination  and  their  proper  motions  at  1984  Jan 
ld0h: 

q,  =tan-'0'3/.r3),  (3.564-3) 
6t  =  tan  1  (z3!ij4  +  ?3  )  ,  (3.564-4) 


(*3  V2  -  V3*2) 

I5s(4+j|)' 

rife  -  z3(x3x2  +ym  +  z3z2) 


15s(jc|  +  yj) 


=  wj^^t^  (3.564-6) 

where  r\  =  x\  +y\  +z\. 

The  equations  for  /x2  and  fi'2  follow  directly  from  the  total  time  derivative  of  the 
equations  for  Q|  and  6\.  The  units  of  a\  and  6\  are  degrees;  n2  and  fi'2  are  in  seconds 
of  time  per  tropical  century,  and  seconds  of  arc  per  tropical  century,  respectively, 
with  s  denned  in  Section  3.563. 

The  parallax,  p3,  at  1984  Jan  ld0h,  consistent  with  a  model  assuming  linear 
space  motion,  is  given  by 

p3  =sin-'(l  In)  (3.564-7) 
and  the  new  radial  velocity  in  AU  per  tropical  century,  r3,  is 

r3  =  (X3X2  +y3y2  +  Ziii)  I  r3.  (3.564-8) 

3.565  Right  Ascension  Zero-Point  Correction  Apply  the  zero-point  correction  to 
the  right  ascension: 


a2  =  a  1  +0!06390, 


(3.565-1) 


1  78  EXPLANATORY  SUPPLEMENT 

where  the  right  ascension  and  declination  (au  6{)  are  expressed  in  seconds  of  time 
and  seconds  of  arc,  respectively. 

3.566  Transformation  of  the  Proper  Motion  System  Applying  the  corrections  and 
transformations  discussed  in  section  3.  55  to  the  proper  motions: 

M  =  (M2  +  0-  085)  F  -  (m  -  m0)  -  (n  sin  a2  -  ra0  sin  at )  tan  62 
=  (m  +  0. 085)  F  -  (307. 465950  -  307. 3968 12) 

-  (133. 629829  sin  a2  -  133. 600750  sin  a,)  tan52, 
fi'3  =  /i2  F  -  (n  cos  a2  -  no  cos  a, ) 

=  n'2F-  (2004. 44743  cos  a2  -  2004. 01 126  cos  aj ) 
where  F  =  1. 00002135903.  (3.566-1) 

From  Equation  3.566-1  it  becomes  evident  that  a  star  precisely  at  or  within  a 
few  seconds  of  arc  of  a  pole  must  be  treated  as  a  special  case.  Historically,  proper 
motions  have  been  given  in  right  ascension  and  declination  without  problems.  If 
a  star  is  very  close  to  the  pole,  the  singularity  is  avoided  by  considering  the  real 
displacement  ^3  cos  62 . 

3.567  Position  and  Velocity  Vectors  (1984  Jan  ld0h  to  J2000.0)  Form  the  vectors 
U4  and  u4  from  oc2,  62,  ^3,  ^3,  using  Equations  3.23-1  and  3.23-3  ensuring  that  the 
unit  of  U4  is  astronomical  units  (au),  and  ii4  is  in  AU  per  Julian  century. 

Form  the  position  vector  u5  at  epoch  J2000.0: 

uste)  =  u4(l  1 )  +  ii4(f2  -  h ),  (3.567-1 ) 

where  (t2  -  tL)  is  the  number  of  Julian  centuries  between  epoch  t2  (J2000.0)  and 
epoch  fj,  1984  Jan  W. 

3.568  Precession  from  1984  Jan  ld0H  to  J2000.0  Apply  the  precession  from  1984 
Jan  ld0h  to  J2000.0  to  the  vectors  u5  and  114,  using  the  precession  matrix  P2  calcu- 
lated from  the  angles  &,      and  dA  given  in  Section  3.542 

u6  =  P2  u5(*2);  (3.568-1) 
«5  =  P2  u4.  (3.568-2) 

From  the  components  of  the  vectors  u6  and  u5,  the  right  ascension  and  declination 
and  their  proper  motions  at  J2000.0  along  with  the  modified  parallax  and  radial 
velocity  may  be  computed  from  a  reapplication  of  Equations  3.564-3  to  3.564-8. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


179 


The  radial  velocity  will  be  in  AU  per  Julian  century,  and  the  conversion  factor  to 
km/s  is  1.49597870  x  108  /  (86400  x  36525). 

If  neither  the  radial  velocity  nor  the  parallax  of  a  star  were  known  at  the 
beginning  of  this  procedure,  then  the  fictitious  values  produced  by  the  procedure 
should  be  ignored.  If  only  the  parallax  is  known,  then  the  original  B1950.0  value 
should  be  brought  forward  without  modification. 

3.57   Transformation  of  Observational  Catalogs 

If  the  transformation  is  applied  to  an  observational  catalog  in  which  no  proper 
motions  are  given,  and  the  mean  positions  are  referred  to  the  mean  epoch  of  obser- 
vation and  the  equinox  of  B1950.0,  then  the  mean  positions  should  be  precessed  to 
the  equinox  of  the  mean  epoch  of  observation,  which,  in  general,  will  be  different 
for  each  star.  The  right  ascension  and  declination  should  be  corrected  foT  terms  in 
elliptic  aberration  corresponding  to  the  mean  epoch  of  observation,  provided  they 
had  not  already  been  removed  when  deriving  the  catalog  place.  Special  care  must 
be  taken  if  the  epochs  of  observation  in  right  ascension  and  declination  are  different, 
which  happens  frequently  in  modern  observational  catalogs. 

The  right  ascensions,  if  they  were  referred  to  the  FK4  system,  should  be  cor- 
rected for  the  zero-point  error  evaluated  at  the  mean  epoch  of  observation  in  right 
ascension.  The  positions  may  be  brought  forward  to  J2000.0  using  the  equations  for 
the  IAU  1976  precession  angles  Ct,  zA,  and  6A  given  in  Table  3.211.1  evaluated  for 
the  time  interval  from  the  mean  equinox  of  observation  to  the  equinox  of  J2000.0. 
In  this  case,  the  proper  motion  part  of  the  computation  may  be  ignored. 

The  same  is  true  of  catalogs  of  radio-interferometrically  determined  positions 
of  quasars  and  other  objects  presumed  to  be  located  at  extragalactic  distances. 
However,  the  transformation  of  Very  Long  Baseline  Interferometry  (VLBI)  and 
connected-element  interferometry  (CEI)  catalog  positions  from  the  equinox  of 
B1950.0  to  J2000.0  is  slightly  more  complicated  than  the  transformation  of  the 
FK4  catalog  because  of  the  way  the  zero  point  in  right  ascension  is  established. 
This  usually  involves  a  systematic  adjustment  to  all  right  ascensions.  Most  adjust- 
ments refer  to  the  averaged  optical  and  radio  right  ascension  of  3C  273B  given  by 
Hazard  et  al.  (1971).  To  the  extent  that  this  right  ascension  was  referred  to  the 
FK4  system  at  its  mean  epoch  of  observation,  it  also  requires  a  correction  to  right 
ascension  by  an  amount  that  the  FK4  equinox  required  at  the  same  epoch.  ^ 

Another  factor  that  should  be  taken  into  consideration  when  transforming  in- 
terferometrically  observed  positions  from  the  B1950.0  basis  to  the  J2000.0  is  the 
intrinsically  high  accuracy  of  such  a  catalog.  In  order  to  preserve  the  high  accuracy 
of  such  catalogs,  the  effects  that  have  been  discussed  earlier— the  elliptic  terms  in 
aberration,  the  equinox  correction,  and  the  use  of  Newcomb's  precession  constant 
to  refer  observations  to  a  fixed  equinox— should  all  be  removed  in  a  manner  as 
closely  analogous  to  the  operations  which  would  have  been  employed  in  reducing 


1 80  EXPLANATORY  SUPPLEMENT 

the  original  observations  at  the  epoch  of  observation  had  the  improved  constants 
been  available  at  that  time.  In  genera],  this  means  that  catalog  positions  must  be 
precessed  back  to  the  equinox  of  the  mean  epoch  of  observation  using  the  same 
precession  constants  as  the  catalog  compiler  used,  and  if  necessary  corrected  for 
the  elliptic  terms  in  aberration  and  equinox  error  of  the  FK4  system.  The  modified 
position  is  then  precessed  to  the  equinox  of  J2000.0  using  the  Lieske  et  al.  pre- 
cession. This  procedure  does  not  recognize  1984  as  an  epoch  at  which  any  special 
condition  is  to  be  imposed  and  best  preserves  without  distortion  the  high  precision 
of  interferometrically  determined  positions. 

3.58  Numerical  Examples 

Numerical  examples  are  given  in  Table  3.58.1  for  selected  FK4  stars.  The  selection 
was  made  on  the  basis  of  proximity  to  the  north  and  south  poles,  the  magnitude 
of  the  proper  motion,  parallax  and  radial  velocity,  and  one  star  which  crosses  the 
equator  between  B1950.0  and  ,12000.0.  For  each  star,  the  first  line  gives  the  B1950.0 
position  on  the  FK4  system  and  the  second  line  gives  the  transformed  data  for 
J2000.0.  The  transformed  FK4  data  given  in  Table  3.58.1  are  not  the  same  as  the 
FK5  data  resulting  from  the  incorporation  of  new  observational  results  produced 
since  the  publication  of  the  FK4  catalog. 

3.59  Matrix  Method 

There  has  been  much  controversy  in  the  literature  over  the  correct  procedure  for 
transforming  catalog  positions  and  proper  motions  to  the  FK5  system  discussed 
in  the  preceding  sections  (Smith  et  al.,  1989).  The  matrix  method  described  here 
(Yallop  et  al,  1989)  is  based  on  Standish  (1982b)  but  modified  to  agree  with  the 
procedure  given  in  Section  3.56.  The  transformation  is  categorized  into  nine  steps; 
six  of  the  steps  of  the  transformation  are  represented  by  a  six-by-six  matrix  de- 
scribed below.  Sections  3.591  and  3.592  give  the  complete  algorithms  for  converting 
star  places  from  B1950.0  to  J2000.0,  and  from  J2000.0  to  B1950.0  by  reversing  the 
transformation.  It  should  be  noted  that  when  transferring  individual  observations, 
as  opposed  to  a  catalog  mean  place,  the  safest  method  is  to  transform  the  obser- 
vation back  to  the  epoch  of  the  observation,  on  the  FK4  system  (or  in  the  system 
that  was  used  to  produce  the  observed  mean  place),  convert  to  the  FK5  system, 
and  transform  to  the  epoch  and  equinox  of  J2000.0. 

The  transformation  for  a  fundamental  catalog  position  is  as  follows: 

Step  1:  Form  the  position  and  velocity  vector  from  the  FK4  catalog  data;  i.e., 
form  the  position  and  velocity  vector  from  the  right  ascension,  declination,  proper 
motions,  parallax,  and  radial  velocity. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


181 


Table  3.58.1 

Selected  Star  Positions  on  FK4  and  FK5  Systems 


FK4 

a 

6 

Px 

RV 

No. 

h 

m 

S 

0 

t 

tt 

s/cy 

"/cy 

km/s 

10 

00 

17 

28.774 

-65 

10 

06.70 

+27.141 

+116.74 

0.134 

+  8.70 

10 

00 

20 

04.3100 

-64 

52 

29.332 

+26.8649 

+116.285 

0.1340 

+  8.74 

1  1  3 

03 

17 

55.847 

—43 

15 

35.74 

+27.827 

+  74.76 

0.156 

+Afi  Rn 

119 

03 

19 

55.6785 

-43 

04 

10.830 

+27.7694 

+  73.050 

0.1559 

+86.87 

06 

1 1 

43.975 

-74 

44 

12.46 

+3.105 

-  21.12 

0.1 1 5 

+35.00 

239 

06 

10 

14.5196 

-74 

45 

1 1 .036 

+3.1310 

-  21.304 

0.1150 

+35.00 

1 4 

36 

1 1 .250 

-60 

37 

48.85 

—49.042 

+  71.20 

0.751 

—22.20 

538 

14 

39 

36.1869 

-60 

50 

07.393 

-49.5060 

+  69.934 

0.7516 

-22.18 

21 

04 

\J  £7.  JOU 

+38 

29 

59.10 

+35.227 

+318.47 

0.292 

— R4  on 

793 

21 

06 

54.5901 

+38 

44 

44.969 

+35.3528 

+320.206 

0.2923 

-63.89 

01 

48 

48.784 

+89 

01 

43.74 

+18.107 

-  0.43 

0.000 

+  0.00 

907 

02 

31 

49.8131 

+89 

15 

50.661 

+21.7272 

-  1.571 

0.0000 

+  0.00 

923 

20 

15 

03.004 

-89 

08 

18.48 

+1 1 .702 

0.09 

0.000 

+  0.00 

923 

21 

08 

46.0652 

-88 

57 

23.667 

+8.4469 

+  0.171 

0.0000 

+  0.00 

1307 

11 

50 

06.172 

+38 

04 

39.15 

+33.873 

-580.57 

0.116 

-98.30 

1307 

11 

52 

58.7461 

+37 

43 

07.456 

+33.7156 

-581.216 

0.1161 

-97.81 

1393 

14 

54 

59.224 

+00 

01 

58.08 

+0.41 1 

-  2.73 

0.000 

+  0.00 

1393 

14 

57 

33.2650 

-00 

10 

03.240 

+0.4273 

-  2.402 

0.0000 

+  0.00 

Step  2:  Remove  the  E-terms  of  aberration  from  the  B1950.0  catalog  mean  place. 
There  is  also  a  question  whether  the  E-terms  should  be  removed  from  the  proper 
motions  or  not.  The  problem  is  discussed  more  fully  in  Section  3.53  and  the  corre- 
sponding vector  development  is  given  in  Yallop  et  al.  (1989).  If  the  FK4  catalog  is 
used,  they  certainly  do  not  have  to  be  removed  from  stars  within  10°  of  the  poles, 
because  they  have  not  been  included  (Lederle,  1984). 

Step  3:  Apply  space  motion  to  the  position  vector  to  the  epoch  1984  January  1.0, 
which  is  the  epoch  at  which  the  sidereal  time  expression  in  terms  of  UT  is  changed 
(IAU,  1976). 

Step  4:  Precess,  using  the  FK4  precession  constants,  the  position,  and  velocity 
from  B1950.0  to  1984  January  1.0. 

Step  5:  Apply  the  equinox  correction  FK4  to  FK5  at  1984  January  1.0  to  the  right 
ascension  and  proper  motion  in  right  ascension. 

Step  6:  Convert  the  proper  motions  from  seconds  of  arc  per  tropical  century  to 
seconds  of  arc  per  Julian  century. 


182 


EXPLANATORY  SUPPLEMENT 


Step  7:  Precess,  using  the  FK5  precession  constants,  the  position  and  velocity 
from  1984  January  1.0  to  J2000.0. 

Step  8:  Apply  space  motion  to  the  position  vector  from  1984  January  1.0  to 
J2000.0. 

Step  9:  Convert  the  position  and  velocity  vector  back  to  right  ascension  and  dec- 
lination and  proper  motions  in  right  ascension  and  declination,  and  extract  the 
parallax  and  radial  velocity  in  the  FK5  system. 

The  Steps  3-8  may  be  represented  by  successive  multiplication  by  the  matrices  Mj , 
M2,  M3,  M4,  M5,  and  Me  on  the  position  and  velocity  vector  at  B  1950.0  to  produce 
the  position  and  velocity  vector  at  J2000.0  where 


Y 

=  M 

[X] 

r 

=  M6  M5  M4  M3  M2  M| 


(3.59-1) 


and  the  position  and  velocity  vectors  r  and  r  are  expressed  in  AU  and  seconds  of 
arc  per  century,  tropical  or  Julian,  as  appropriate.  The  conversion  of  the  units  of 
the  velocity  vector  is  done  by  matrix  Mi.  The  following  is  a  brief  explanation  of 
the  notation  used: 

CB  =  36524.21987817305  days,  the  length  of  the  tropical  century; 
Cj  =  36525  days,  the  length  of  the  Julian  century; 
£  =  Epoch,  e.g.,  1984  January  1.0; 
JD(date)  =  Julian  date,  JD(B1950.0)  =  2433282. 42345905,  JD(J2000.0)  =  2451545. 0, 

and  JD(1984  January  1.0)  =  2445700.5; 
I  and  O  -  Unit  and  null  3x3  matrices. 

The  rotation  matrices  M2,  M3,  and  M5  are  formed  from  the  Q„  t  =  2,3  matrices, 
which  are  given  by 


Q,(4>,  0)  = 


R,(0)  O 

a 


(3.59-2) 


L^R,-(0)  R,-(0). 

where  R,'s  are  the  standard  3x3  rotation  matrices,  and  ^  is  a  function  of  time. 
The  derivatives  of  the  required  rotation  matrices  are 


—  sin  <^  0 
0  0 
cos0  0 


-COS(j> 

0 

-  sin  <p 


d<i> 


R3  W  = 


—  sin* 

—  cos  ( 
0 


cos<6  0" 
-sin0  0 
0  0 


(3.59-3) 


In  6-space  the  notation  for  the  precession  matrix  (Section  3.21)  has  to  be  mod- 
ified to  include  a  further  parameter  s,  where  s  =  0  when  precessing  from  one  inertial 
frame  to  another  inertial  frame,  and  s  =  1  when  precessing  from  an  inertial  frame 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


183 


to  a  noninertial  frame  (i.e.,  rotating  frame  of  date).  The  expression  for  P,  using  the 
accumulated  precession  angle  notation,  becomes 


P[£F,  eD,  s]  = 


P  O 

sP  P 


=  Q3(-^,-^a)Q2(+^,+40Q3(-C4,-<4).  (3.59-4) 


In  order  to  calculate  P„  and  P„  the  equatorial  precession  angles  on  the  FK4 
(Section  3.214)  and  FK5  (Section  3.211)  systems  are  required,  respectively,  together 
with  their  rates  of  change  with  respect  to  time.  The  precession  rates  on  the  FK4 
and  FK5  systems  are  given  by 


QA  =  jtUT,t)    zA  =  jtZA(T,t)    eA  =  jt6A(T,t). 


(3.59-5) 
(3.59-6) 


The  six  matrices  are  defined  as  follows: 

M|  Adds  space  motion  between  the  standard  epoch  B1950.0  and  e  to  the 
position  vector  at  B1950.0: 


M,  = 


I  f0I 
O  I 


(3.59-7) 


where  t0  =  c(JD(e)  -  JD(B1950. 0))  /  CB  and  c  =  tt  /  (180  x  3600)  is  the  factor  that 
converts  the  proper  motions  to  radians  per  century. 

M2  Applies  FK4  precession  from  B1950.0  to  g,  to  the  position  and  velocity 
in  6-space: 

M2  =  Po[B1950. 0,  e,  1]  =  Q3(-z,  -fl  Q2(+#,  +0)  Q3(-Co,  -Co)-  (3.59-8) 

M3  Adds  the  equinox  correction  to  the  right  ascension  and  proper  motion  in 
right  ascension  at  epoch  e: 


M3  =Q3(-£e,-£), 


(3.59-9) 


where  Ee  =  £50  +  E(JD(e)  -  JD(B1950. 0))  /  CB,  £50  =  0'.'525  and  E  =  1'.'275. 

M4     Converts  the  proper  motions  from  tropical  centuries  to  Julian  centuries: 


M4  = 


I  O 

O  (Q/CB)I 


(3.59-10) 


M5  Applies  FK5  precession  from  e  to  J2000.0,  to  the  position  and  velocity 
in  6-space: 


184 


M5  =P-1[J2000.0,£,1] 


EXPLANATORY  SUPPLEMENT 

(3.59-11) 


M6     Adds  space  motion  between  e  and  J2000.0  to  the  position  vector  at  e: 


M6  = 


I  -tit 
O  I 


(3.59-12) 


where  t\  =  c(JD(e)  -  JD(J2000, 0))  /  Q  and  c  =  tt  /  (180  x  3600). 


The  following  two  sections  give  complete  algorithms  for  the  conversion  to  and 
from  J2000.0  using  the  matrix  M  and  its  inverse  M-1.  It  should  be  noted  that  here, 
and  in  the  method  given  on  pages  B42  and  B43  of  The  Astronomical  Almanac, 
Kinoshita's  development  of  Andoyer's  precession  angles  (Aoki  et  al,  1983)  have 
been  used.  However,  the  numerical  values  for  the  vector  components  for  correcting 
the  E-terms  of  aberration  in  Equation  3.591-2  have  been  taken  from  Yallop  et  al. 
(1989). 

Planetary  positions  may  also  be  transformed  using  Mp,  where  Mp  is  a  3  x  3 
matrix  formed  from  partitioning  M  =  M2M3M4M5  (M4  has  no  effect  on  position) 
into  four  3x3  matrices  and  extracting  the  leading  matrix.  Alternatively,  use  the 
appropriate  3x3  rotational  matrices  from  M2,  M3,  and  M5. 

3.591  Conversion  of  Stellar  Positions  and  Proper  Motions  from  the  FK4  System 
at  B 1950.0  to  FK5  System  at  J2000.0  A  matrix  method  for  calculating  the  mean 
place  of  a  star  at  J2000.0  on  the  FK5  system  from  the  mean  place  at  B1950.0  on 
the  FK4  system,  ignoring  the  systematic  corrections  FK5-FK4  and  individual  star 
corrections  to  the  FK5,  is  as  follows: 

Step  a:  From  a  star  catalog  obtain  the  FK4  position  (a0,  6q),  in  degrees,  proper 
motions  {fiaa,  fi$0)  in  seconds  of  arc  per  tropical  century,  parallax  (ttq)  in  seconds  of 
arc,  and  radial  velocity  (v0)  in  kms"1  for  B1950.0.  If  w0  or  vq  are  unspecified,  set 
them  both  equal  to  zero. 

Step  b:  Calculate  the  rectangular  components  of  the  position  vector  r0  and  veloc- 
ity vector  r0  from 


To  = 


ro  = 


COS  Qo  COS  60  1 

sin  cto  cos  <5o 
sin60 

— fiao  sin  Qo  cos  60  —  us,,  cos  qo  sin  So 
+paf>  cos  a0  cos  60  —  ^6o  sin  qo  sin  60 
fxs„  cos  60 


(3.591-1) 


+  21.095  Vo7r0r0. 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 85 

Step  c:    Remove  the  effects  of  the  E-terms  of  aberration  to  form  Ty  and  rj  from 

rL  =  r0  -  A  +  (r0  ■  A)r0, 
r,  =  r0  -  A  +  (r0  ■  A)r0, 


where  A  ~ 


A  = 


-1.62557 
-0.31919 
-0. 13843 

+1'.'245 
-1'.'580 
-0"659 


x  10  6  radians, 


x  10  3  per  tropical  cy, 


(3.591-2) 


and  (r0  •  A)  is  the  scalar  product. 


Step  d:    Form  the  vector  Ri 


and  calculate  the  vector  R  : 


from 


R  =  MRi 


(3.591-3) 


where  M  is  a  constant  6x6  matrix: 


+0.9999256782  -0.01 1 18206!  1  -0.0048579477  +0.OOOOO242395018  -0.00000002710663  -  0.00000001 177656 

+0.0111820610  +0.9999374784  -0.0000271765  +0.00000002710663  +0.00000242397878  -  0.OOO0OOOOO06587 

+0.0048579479  -0.0000271474  +0.9999881997  +0.00000001177656  -O.OOO0000O0O6582  +0.OO000242410173 

-0.000551  -0.238565  +0.435739  +0.99994704  -0.01118251  -0.00485767 

+0.238514  -0.002667  -  0.008541  +0.01118251  +0.99995883  -  0.00002718 

-0.435623  +0.012254  +0.002117  +0.OO485767  -  0.00002714  +1.00000956 


(3.591-4) 


and  set  (x,y,z,x,y,z)  =  R'- 


Step  e:  Calculate  the  FK5  mean  position  {au  ffj),  proper  motions  (jia,,fi6x)  in 
seconds  of  arc  per  Julian  century,  parallax  (7Ti)  in  seconds  of  arc,  and  radial  velocity 
(vi)  in  kms-1  for  .12000.0  from 

cosqi  cosi5]  =xlr,       sin  at  cos<5[  =  ylr,  sin<5i=z/r, 


xy  —  yx 

Mai  —     -j  ,     3" > 

x1  +  y1 


zix2  +  y1)  -  z(xx  +  yy) 


vi  =  (xx  +  yy  +  zz)  /  (2 1 . 0957T0r),        tt,  =  tt0  /  r, 


(3.591-5) 


where  r  =  y'jc2  +  y2  +  z2.        If  7r0  is  zero  then  v\  -  vq- 


1  fifi 

EXPLANATORY  SUPPLEMENT 

3.592  Conversion  of  Stellar  Positions  and  Proper  Motions  from  the  FK5  System 
at  J2000.0  to  FK4  System  at  B1950.0  A  matrix  method  for  calculating  the  mean 
place  of  a  star  at  B1950.0  on  the  FK4  system  from  the  mean  place  at  J2000.0  on 
the  FK5  system,  ignoring  the  systematic  corrections  FK4-FK5  and  individual  star 
corrections  to  the  FK4,  is  as  follows: 

Step  1:  From  a  star  catalog  obtain  the  FK5  position  (a„,  Sq),  in  degrees,  proper 
motions  (fiao,fiSo)  in  seconds  of  arc  per  Julian  century,  parallax  (n0)  in  seconds  of 
arc,  and  radial  velocity  v0  in  kms"1  for  J2000.0.  If  tt0  or  (v0)  are  unspecified,  set 
them  both  equal  to  zero. 

Step  2:  Calculate  the  rectangular  components  of  the  position  vector  r0  and  veloc- 
ity vector  r0  from  Equation  3.591-1. 


Step  3:    Form  the  vector  Ro  = 


To 


and  calculate  the  vector  R[  = 


from: 


R|  =M-'Ro, 

where  M~'  is  a  constant  6x6  matrix: 


(3.592-1) 


+0.9999256795    +0.0111814828  +0.0048590039  -0.00000242389840  -0.00000002710544  -0.00000001177742 

-0.0111814828    +0.9999374849  -0.0000271771    +0.00000002710544  -0.00000242392702  +O0OOO0OOOOO6585 

-0.0048590O40  -0.000027.557  +0.9999881946    +0.00O0000 1 177742    +O.000O000OO06585  -0  00000242404995 

-0.000551  +0.238509  -0.435614  +0.99990432  +0.01118145  +0.00485852 

-0.238560         -  0.002667  +0.012254         -  0.01118145  +0.99991613  -0  00002717 

+0.435730         -0.008541  ,0.002,17         -0.00485852  -0.00002716  +0.99996684 

(3.592-2) 

Step  4:  Include  the  effects  of  the  E-terms  of  aberration  as  follows.  Form  s,  =  r,  /r, 
and  S]  =  f  i  /  n  where  r,  -  ^/x]  +y~  +  zj. 

Set  s  =  s, ,  and  calculate  r  from  r  =  S|  +  A  -  (s  •  A)s,  where  A  is  given  in  Step  c  of 
Section  3.591. 

Set  s  =  rlr  and  iterate  the  expression  for  r  once  or  twice  until  a  consistent  value  of 
r  is  obtained,  then  calculate 


r  =  si  +  A  -  (s  •  A)s, 


(3.592-3) 


where  A  is  given  in  Step  c  of  Section  3.591. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


187 


Step  5:  Calculate  the  FK4  mean  (at},  8\),  proper  motions  (fiai,/iSl)  in  seconds  of 
arc  per  tropical  century,  parallax  (tti)  in  seconds  of  arc,  and  radial  velocity  (v[)  in 
kms-1  for  B1950.0,  as  given  in  Section  3.591  Step  e,  by  setting  (x,y,z)  =  r',  (x, y, z)  - 
r'  and  r  =  ^Jx2  +  y2  +  z2. 

In  Step  4  set  (xuyuzi)  =  r7,,  (xuy\,Zi)  =  r1],  and  rj  =  <Jx\+y\  +  z],  then 

V]  =(xixt  +y,yi  +Zlj,)/(21.0957r0ri),       tt,  =  tt0  /  r] .  (3.592^+) 
If  ttq  is  zero  then  v\  -  v0. 


3.6  REFERENCES 

Those  publications  referenced  in  Chapter  3  are  indicated  by  a  |. 

fAbalakin,  V.,  ed.  (1985).  Refraction  Tables  of  Pulkova  Observatory,  5th  edition,  Cen- 
tral Astronomical  Observatory,  Academy  of  Science  of  the  USSR.  Nauka  Publishing 
House,  Leningrad  Section,  Leningrad,  USSR. 

f  Andoyer,  M.H.  (1911).  "Les  Formules  de  la  Precession  d'apres  S.  Newcomb"  Bull.  Astron. 
28,  67. 

f  Aoki,  S.,  Guinot,  B.,  Kaplan,  G.H.,  Kinoshita,  H.,  McCarthy,  D.D.,  and  Seidelmann,  P.K. 

(1982).  "The  New  Definition  of  Universal  Time"  Astron.  Astrophys.  105,  359. 
Aoki,  S.  and  Kinoshita,  H.  (1983).  "Note  on  the  Relation  Between  the  Equinox  and 

Guinot's  Non-rotating  Origin"  Celes.  Mech.  29,  335. 
f  Aoki,  S.,  Soma,  M.,  Kinoshita,  H.,  and  Inoue,  K.  (1983).  "Conversion  Matrix  of  Epoch 

B1950.0  FK4-based  Positions  of  Stars  to  Epoch  J2000.0  Positions  in  Accordance  with 

the  New  IAU  Resolutions"  Astron.  Astrophys.  128,  263. 
Aoki,  S.  (1988).  "Relation  Between  the  Celestial  Reference  System  and  the  Terrestrial 

Reference  System  of  a  Rigid  Earth"  Celes.  Mech.  42,  309. 
Arias,  E.F.,  Lestrade,  L.-F.,  and  Feissel,  M.  (1988).  "Relative  Orientation  of  VLBI  Celestial 

Reference  Frames"  in  The  Earth's  Rotation  and  Reference  Frames  for  Geodesy  and 

Geodynamics  A.K.  Babcock  and  G.A.  Wilkins,  eds.  IAU  Symposium  128  (Kluwer, 

Dordrecht,  Holland),  p.  61. 
Ashby,  N.  and  Allan,  D.W.  (1979).  "Practical  Implications  of  Relativity  for  a  Global 

Coordinate  Time  Scale"  Radio  Sci.  14,  649. 
t  Atkinson,  R.d'E.  (1972).  "Modern  Aberration  for  Observations  of  any  Date"  Astron.  J. 

77,  512. 

t  Atkinson,  R.d'E.  (1973).  "On  the  'Dynamical  Variations'  of  Latitude  and  Time"  Astron. 
J.  78,  147. 

t  Atkinson,  R.d'E.  (1975).  "On  the  Earth's  Axes  of  Rotation  and  Figure"  Mon.  Not.  R. 
Astr.  Soc.  171,  381. 

Atkinson,  R.d'E.  (1976).  "On  the  Earth's  Axes  of  Rotation  and  Figure"  Presented  at  XVI 
Gen.  Assembly  of  IUGG,  Grenoble, 
t  Atkinson,  R.d'E.  and  Sadler,  D.H.  (1951).  "On  the  Use  of  Mean  Sidereal  Time"  Mon.  Not 
R.  Astr.  Soc.  Ill,  619. 


188 


EXPLANATORY  SUPPLEMENT 


f  Auer,  L.H.  and  Standish,  E.M.  Jr.  (1979).  "Astronomical  Refraction;  Computational 
Method  for  all  Zenith  Angles"  Yale  University  Astronomy  Department. 
Backer,  D.C.,  Fomalont,  E.B.,  Goss,  W.M,  Taylor,  J.H.,  and  Weisberg,  J.M.  (1985).  "Ac- 
curate Timing  and  Interferometer  Positions  for  the  Millisecond  Pulsar  1937+21  and 
the  Binary  Pulsar  1913+16"  Astron.  J.  90,  2275. 
Barbieri,  C.  and  Bernacca,  P.L.,  eds.  (1979).  European  Satellite  Astrometry  (Inst,  di  As- 

tronomia,  Univ.  di  Padova,  Italy). 
Bender,  P.L.  (1974).  "Reference  Coordinate  System  Requirements  for  Geophysics"  in  On 
Reference  Coordinate  Systems  for  Earth  Dynamics  B.  Kolaczek  and  G.  Weiffenbach 
eds.  IAU  Colloquium  26,  (Smithsonian  Astrophys.  Obs,  Cambridge,  MA),  p  85 
Bender,  P.L.  and  Goad,  C.  (1979).  The  Use  of  Artificial  Satellites  for  Geodesy  and  Geo- 
dynamics  Vol.  II  (National  Technical  University,  Athens). 
tBlackwell,  K.C.  (1977).  "Equinox— position  and  motion  during  250  years"  Mon.  Not  R 

Astr.  Soc.  180,  Short  Communication,  65P. 
fBoss,  B.  (1937).  General  Catalog  of  33S4S  Stars  for  the  Epoch  1950  Publication  No.  468 
(Carnegie  Inst,  of  Washington). 
Boucher,  C.  (1985).  "Terrestrial  and  Inertial  Relativists  Reference  Frames"  Groupe  de 
Recherce  en  Geodesie  Spatiale  (GRGS)  Rep.  No.  3  (Institut  de  Geographie  National 
Paris). 

Boucher,  C.  (1987).  "Definition  and  Realization  of  Terrestrial  Reference  Systems  for  Mon- 
itoring Earth  Rotation"  Institut  de  Geographic  National/Service  de  la  Geodesie  et 
du  Nivellement  (IGN/SGN),  Paris  No.  27,  459. 
Boucher,  C.  and  Altaminmi,  Z.  (1987).  "Intercomparison  of  VLBI,  LLR,  SLR,  and  GPS 
Derived  Baselines  on  a  Global  Basis"  Institut  de  Geographic  National/ Service  de  la 
Geodesie  et  du  Nivellement  (IGN/SGN),  Paris  No.  2,  450. 
t  Bretagnon,  P.  (1982) .  "Theorie  du  mouvement  de  l'ensemble  des  planetes.  Solution  VSOP82' 
Astron.  Astrophys.  114,  278. 
Brouwer,  D.  and  de  Sitter,  W.  (1938).  "On  the  System  of  Astronomical  Constants"  Bull 

Astron.  Inst  of  the  Netherlands  8,  213. 
BIH  Annual  Rep.  for  1984  (1985).  (Bureau  International  de  l'Heure,  Paris) 
BIH  Annual  Rep.  for  1985  (1986).  (Bureau  International  de  l'Heure,  Paris) 
BIH  Annual  Rep.  for  1986  (1987).  (Bureau  International  de  l'Heure,  Paris) 
t  BIH  Annual  Rep.  for  1987  (1988).  (Bureau  International  de  FHeure,  Paris) 
Cannon,  W.H.  (1978).  "The  Classical  Analysis  of  the  Response  of  a  Long  Baseline  Radio 

Interferometer"  Geophys.  J.  R.  Astr.  Soc.  53,  503. 
Capitaine,  N,  Williams,  J.G.,  and  Seidelmann,  P.K.  (1985).  "Clarifications  Concerning 
the  Definition  and  Determination  of  the  Celestial  Ephemera  Pole"  Astron.  Astrophys. 

-L--±U,  Ool. 

Capitaine,  N.  (1986).  "The  Earth  Rotation  Parameter:  Conceptual  and  Conventional  Def- 
initions'  Astron.  Astrophys.  162,  323. 

Capitaine,  N  Guinot,  B.,  and  Souchay,  J.  (1986).  "A  Non-Rotating  Origm  on  the  Instan- 
taneous Equator:  Definitions,  Properties  and  Use"  Celes.  Mech.  39  283 

Capitame,  N.  and  Guinot,  B.  (1988).  "A  Non-Rotating  Origin  on  the  Instantaneous  Equa- 
a°v  d  Eartk'S  Rotation  and  Reference  Frames  for  Geodesy  and  Geodynamics 
A.K  Babcock  and  G.A.  Wilkins,  eds.  IAU  Symposium  128  (Kluwer,  Dordrecht  Hol- 
land), p.  33. 

Carter,  W.E.,  Robertson,  D.S.,  and  Fallon,  F.W.  (1987).  "Polar  Motion  and  UT1  Time 
Series  Derived  from  VLBI  Observations"  BIH  Annual  Rep.  for  1986  D-19,  Paris. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


189 


Carter,  W.E.  (1988).  "Corrections  to  the  IAU  1980  Nutation  Series"  BIH  Annual  Rep.  for 
i£)£7D-105,  Paris. 

Chappie,  W.M.  and  Tullis,  T.E.  (1977).  "Evaluation  of  the  Forces  that  Drive  the  Plates" 
J.  Geophys.  Res.  82,  No.  14,  1967. 

Chauvenet,  W.,  (5th  ed.,  revised  and  corrected  1908),  A  Manual  of  Spherical  and  Practi- 
cal Astronomy  2  vol.  (Lippincott,  Philadelphia),  reprinted  (Dover  Publications,  New 
York,  1960). 

Corbin,  T.E.  (1978).  "The  Proper  Motions  of  the  AGK3  R  and  SRS  Stars"  in  Modern 

Astrometry  F.V.  Prochazka  and  R.H.  Tucker,  eds.  IAU  Colloquium  48,  (University 

Observatory,  Vienna),  p.  505. 
de  Sitter,  W.  (1910).  "On  the  Formula  for  the  Comparison  of  Observed  Phenomena  of 

Jupiter's  Satellites  with  Theory"  Mon.  Not.  R.  Astr.  Soc.  71,  85. 
de  Sitter,  W.  (1911).  "On  the  Harvard  Eclipses  of  Jupiter's  Satellite  IV"  Mon.  Not.  R. 

Astr.  Soc.  71,  596  and  602. 
Dicke,  R.H.  (1969).  "Average  Acceleration  of  the  Earth's  Rotation  and  the  Viscosity  of 

the  Deep  Mantle"  J.  Geophys.  Res.  74,  25,  5895. 
Dickey,  J.O.  (1989).  "Intercomparisons  Between  Kinematic  and  Dynamical  Systems"  in 

Reference  Frames  in  Astronomy  and  Geophysics  J.  Kovalevsky,  I.I.  Mueller,  and  B. 

Kolaczek,  eds.  (Kluwer,  Dordrecht,  Holland),  p.  305. 
Duncombe,  R.L.,  Seidelmann,  P.K.,  and  Van  Flandern,  T.C.  (1974).  "Celestial  Reference 

Systems  Derivable  from  Solar  System  Dynamics"  in  On  Reference  Coordinate  Sys- 
tems for  Earth  Dynamics  B.  Kolaczek  and  G.  Weiffenbach,  eds.  IAU  Colloquium  26 

(Smithsonian  Astrophys.  Obs.,  Cambridge,  MA),  p.  223. 
Duncombe,  R.L.,  Fricke,  W.,  Seidelmann,  P.K,,  and  Wilkins,  G.A.  (1976).  "Joint  Report  of 

the  Working  Groups  of  the  IAU  Commission  4  on  Precession,  Planetary  Ephemerides, 

Units  and  Time-Scales"  Trans.  IAU  XVIB,  56. 
t  Dyson,  Sir  F.W.,  Eddington,  A.S.,  and  Davidson,  C.  (1920).  "A  Determination  of  the 

Deflection  of  Light  by  the  Sun's  Gravitational  Field,  from  Observations  made  at  the 

Total  Solar  Eclipse  of  May  29,  1919"  Phil.  Trans.  R.  Soc.  London  A220,  291. 
Eichhorn,  H.K.  and  Leacock,  R.J.  (1986).  Astrometric  Techniques  IAU  Symposium  109 

(Reidel,  Dordrecht,  Holland), 
t  Einstein,  A.  (1956).  The  Meaning  of  Relativity  (Princeton  University  Press,  Princeton, 

NJ). 

t  Emerson,  B.  (1973).  "A  Method  of  Calculating  Apparent  Places  of  Stars"  R.  Ohs.  Bull. 
178,  299. 

Eubanks,  T.M.,  Steppe,  J.A.,  and  Speith,  M.A.  (1985).  "Earth  Orientation  Parameters 
by  Very  Long  Base  Interferometry"  BIH  Annual  Rep.  for  1984  D"19.  Paris. 

t  Explanatory  Supplement  to  the  Astronomical  Ephemeris  and  the  American  Ephemeris  and 
Nautical  Almanac  (1961).  (Her  Majesty's  Stationery  Office,  London,  reprinted  1974). 

fFabri,  E.  (1980).  "Advocating  the  Use  of  Vector-Matrix  Notation  in  Precession  Theory" 
Astron.  Astrophys.  82,  123. 
Fanselow,  J.L.,  Sovers,  O.J.,  Thomas,  J.B.,  Purcell,  G.H.  Jr.,  Cohen,  E.J.,  Rogstad,  D.H., 
Skjerve,  L.J.,  and  Spitzmesser,  D.J.  (1984).  "Radio  Interferometric  Determination  of 
Source  Positions  Utilizing  Deep  Space  Network  Antennas— 1971  to  1980"  Astron.  I. 
89,  987. 

Fedorov,  E.P.,  Smith,  M.L.,  and  Bender,  P.L.,  eds.  (1980).  Nutation  and  the  Earth's  Ro- 
tation IAU  Symposium  78  (Reidel,  Dordrecht,  Holland). 

Feissel,  M.  (1980).  "Determination  of  the  Earth  Rotation  Parameters  by  the  Bureau  In- 
ternational de  l'Heure,  1962-1979"  Bull.  Geodesique  54,  81. 


190 


EXPLANATORY  SUPPLEMENT 


f  FK3  (1937).  "Dritter  Fundamentalkatalog  des  Berliner  Astromischen  Jahrbuchs"  Veroffent- 
lichungen des  Astronomischen  Rechen-Instituts  zu  Berlin- Dahlem  Nr.  54. 

tFK4  (1963).  "Fourth  Fundamental  Catalogue"  Veroffentlichungen  des  Astronomischen 
Rechen-Instituts  Heidelberg  No.  10. 

tFomalont,  E.B.  and  Sramek,  R.A.  (1975).  "A  Confirmation  of  Einstein's  General  Theory 
of  Relativity  by  Measuring  the  Bending  of  Microwave  Radiation  in  the  Gravitational 
Field  of  the  Sun"  Astrophys.  J.  199,  749. 
Fricke,  W.  (1967).  "Precession  and  Galactic  Rotation  Derived  from  Fundamental  Proper 

Motions  of  Distant  Stars"  Astron.  J.  72,  1368, 
Fricke,  W.  (1971).  "A  Rediscussion  of  Newcomb's  Determination  of  Precession"  Astron. 
Astrophys.  13,  298. 

Fricke,  W.  (1974)  .  "Definition  of  the  Celestial  Reference  Coordinate  System  in  Fundamen- 
tal Catalogues"  in  On  Reference  Coordinate  Systems  for  Earth  Dynamics  B.  Kolaczek 
and  G.  Weiffenbach,  eds.  IAU  Colloquium  26  (Smithsonian  Astrophys.  Obs.,  Cam- 
bridge, MA),  p.  201. 

f  Fricke,  W.  (1977).  "Basic  Material  for  the  Determination  of  Precession  and  of  Galactic 
Rotation  and  a  Review  of  Methods  and  Results"  Veroffentlichungen  Astron,  Rechen- 
Inst.  Heidelberg  no.  28,  Verlag  G.  Braun,  Karlsruhe. 

Fricke,  W,  and  Gliese,  W.  (1978).  "Progress  in  the  Compilation  of  the  FK5"  in  Modern 
Astrometry  F.V.  Prochazka  and  R.H.  Tucker,  eds.  IAU  Colloquium  48,  (University 
Observatory  Vienna),  p.  421. 

Fricke,  W.  (1979).  "Progress  Report  on  Preparation  of  FK5  for  Commission  4"  Proceedings 
of  the  Seventeenth  General  Assembly"  Montreal  1979,  Trans.  IAU  XVIIB  (Reidel, 
Dordrecht,  Holland),  p.  65. 

Fricke,  W.  (1979).  "Methods  of  Compiling  a  Fundamental  Reference  System"  in  Collo- 
quium on  European  Satellite  Astrometry  C.  Barbieri  and  PL.  Bernacca,  eds.  (1st.  di 
Astromomia,  Univ.  di  Padova,  Italy),  p.  175, 
t  Fricke,  W.  (1982).  "Determination  of  the  Equinox  and  Equator  of  the  FK5"  Astron.  As- 
trophys. 107,  L13. 

Froeschle,  M.  and  Kovalevsky  J,  (1982).  "The  Connection  of  a  Catalogue  of  Stars  with  an 
Extragalactic  Reference  Frame"  Astron.  Astrophys.  116,  89. 

Gaposchkin,  E.M.  and  Kolaczek,  B.  (1981).  Reference  Coordinate  Systems  for  Earth  Dy- 
namics IAU  Colloquium  56  (Reidel,  Dordrecht,  Holland). 

Garfinkel,  B.  (1944).  "An  Investigation  in  the  Theory  of  Astronomical  Refraction"  Astron. 
J.  50,  169. 

Garfinkel  B.  (1967).  "Astronomical  Refraction  in  a  Polytropic  Atmosphere"  Astron.  J.  72, 
235. 

t  Gilbert,  F.  and  Dziewonski,  A.M.  (1975).  "An  Application  of  Normal  Mode  Theory  to  the 
Retrieval  of  Structural  Parameters  and  Source  Mechanisms  from  Seismic  Spectra" 
Phil.  Trans.  R.  Soc.  London  A278,  187. 

Goad,  C.  (1979).  "Gravimetric  Tidal  Loading  Computed  from  Integrated  Green's  Func- 
tions" NOAA  Tech.  Memorandum  NOS  NGS  22  (NOS/NOAA,  Rockville,  MD). 

Green,  R.M.  (1985).  Spherical  Astronomy  (Cambridge  University  Press,  Cambridge,  Eng- 
land), 

Greenwich  Observations  for  1898  (1900).  "Refraction  Tables  Arranged  for  Use  at  the 
Royal  Observatory,  Greenwich"  Appendix  I,  by  P.H.  Cowell  (Her  Majesty's  Stationery 
Office,  London). 

Guinot,  B.  (1978).  Dept.  of  Geod.  Sci.  Rep.  280,  LI.  Mueller,  ed.  (Ohio  State  University, 
Columbus),  p.  13. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


191 


Guinot   B   (1979),  "Basic  Problems  in  the  Kinematics  of  the  Rotation  of  the  Earth 
trvneandthe  Earth's  Rotation  D.D.  McCarthy  and  J.D.H.  Pilkmgton,  eds.  IAU 
Symposium  82  (Reidel,  Dordrecht,  Holland),  p.  7. 
n  ■  M  R  f  19791  "Irregularities  of  the  Polar  Motion"  in  Time  and  the  Earth  s  Rotation 
D  D  McCarthy  and  J  D . H .  PiUdngton,  eds.  IAU  Symposium  82  (Reidel,  Dordrecht, 

Holland),  p.,279.  ^     ...  - 

Guinot  B  (1981).  "Comments  on  the  Terrestrial  Pole  of  Reference,  the  Origin  °f  the  Lon- 
gitudes and  on  the  Definition  of  UT1"  in  Reference  Coordznate  Systems  for  Earth 

DynamicTEM.  Gaposchkin  and  B.  Kolaczek,  eds.  IAU  Colloquium  56  (Re.del,  Dor- 

drecht,  Holland),  p.  125. 
Guinot  B  (1986).  "Concepts  of  Reference  Systems"  in  Astrometnc  TechmquesH.K E.ch- 

horn  and  R  J ■  Leacock,  eds.  IAU  Symposium  109  (Reidel,  Dordrecht,  Holland),  p.  1. 
Guinot  B  (1989).  "Astronomical  and  Atomic  Time  Scales"  in  Reference  Frames  in  As- 
Xonomy  and  Geophysics  J.  Kovalevsky,  LI.  Mueller  and  B.  Kolaczek,  eds.  (Kluwer, 

Dordrecht,  Holland),  p.  351. 
Harzer  P  (1924).  "Berechnung  der  Ablenkung  der  Lichtstrahlen  in  der  Atmosphare  der 

Erde  auf  rein  Meteorologisch-Physikalischer  Grundlage"  Publikation  der  Stemwarte 

Harzer  PM ^^''Gebrauchstabellen  zur  Berechnung  der  Ablenkungen  der  Lichtstrahlen 
Tn  der  Atmosphare  der  Erde  for  die  Beobachtungen  am  Grossen  K.eler  Mendiankre.se 
Publikation  der  Sternwarte  in  Kiel  No.  14. 

Hellings,  R.W.  (1986).  "Relativistic  Effects  in  Astronomical  Timing  Measurements  As- 
tron J  91  651  (see  also  92,  1446  for  erratum). 

Herring,  T.A.,  Gwinn,  C.R,  and  Shapiro,  I.I.  (1986).  "Geodesy  by  Radio  Interferometry: 
Studies  of  the  Forced  Nutations  of  the  Earth"  J.  Geophys.  Res.  91,  47 45 
t  Herring,  T.A.  (1987).  "Herrings  Correction  to  the  IAU  1980  Nutat.on  Senes   BIH  Annual 

^-/^TndTnclair  AT  (1985).  "The  Computation  of  Angular  Atmospheric 
Hohenkerk,  C.Y.,  and  binciair,  a.i.  li™;-  .  f  not™  T^hnirnl  Note  63. 

Refraction  at  Large  Zenith  Angles"  HM  Nautical  Almanac  Office  Technical  Note  M, 

Royal  Greenwich  Observatory.  , 
4.u    i       -i  *        |  ,mW  r>K   M9821    "Results  of  Observations  Made  with  the  brx-mcn 

»Hugh^:A™";«r;ai'6LB,„h.m,R.L,  „« .  » 

Naval  Observatory  (in  press).  »mi  A**embh 

IAU  (1948).  "Commission  4,  Ephemerides"  Transactions  of  the  Seventh  General  Assembly 
Trans.  IAU  VII,  75,  (Cambridge  University  Press,  Cambridge,  England)_ 
tIAU  (1952).  Transactions  of  the  Eighth  General  Assembly  Trans.  IAU  VIII,  67,  JH,  * 

bridge  University  Press,  Cambridge,  England). 
tIAU  (1967).  "Commission  4,  Ephemerides"  Preceding,  of  the  Thirteenth  General  Assem 

bly  Trans.  IAU  XIIIB  (Reidel,  Dordrecht,  Holland), 
t  IAU  (1976).  "Report  of  Joint  Meetings  of  Commissions  4,  8,  and  31  on  the  New  System  of 
Astronomical  Constants"  Proceedings  of  the  Sixteenth  General  Assembly  Wff  Trans. 
IAU  XVIB  (Reidel,  Dordrecht,  Holland). 
tIAU  (1980).  Reports  on  Astronomy  Trans.  IAU  XVHIA  (Reidel,  Dordrecht,  Holland),  p.  8. 
t Irwin,  J.B.  (1959).  "Standard  Light-Time  Curves"  Astron.  J.  64,  149. 


192 


EXPLANATORY  SUPPLEMENT 


Jeffreys,  W.H.  (1980).  "Astrometry  with  the  Space  Telescope"  Celea.  Mech.  22,  175. 
Kaplan,  G.H.,  ed.  (1981).  "The  IAU  Resolutions  on  Astronomical  Constants,  Time  Scales, 

and  the  Fundamental  Reference  Frame"  United  States  Naval  Observatory  Circular  163 

(U.S.  Naval  Observatory,  Washington). 
Kaplan,  G.H.,  Josties,  F.J.,  Angerhofer,  P.E.,  Johnston,  K.J.,  and  Spencer,  J.H.  (1982). 

"Precise  Radio  Source  Positions  from  Interferometric  Observations"  Astron.  J.  87, 

570. 

t  Kaplan,  G.H.,  Hughes,  J. A.,  Seidelmann,  P.K.,  Smith,  C.A.,  and  Yallop,  B.D.  (1989). 
"Mean  and  Apparent  Place  Computations  in  the  New  IAU  system.  III.  Apparent, 
Topocentric,  and  Astrometric  Places  of  Planets  and  Stars"  Astron.  J.  97,  1197. 
Kaula,  W.M.  (1975).  "Absolute  Plate  Motions  by  Boundry  Velocity  Minimizations"  J. 
Geophys.  Res.  80,  No.  2,  244. 
fKinoshita,  H.  (1975).  "Formulas  for  Precession"  Smithsonian  Astrophysical  Observatory 

Special  Report  364,  (Smithsonian  Astrophys.  Obs.,  Cambridge,  MA). 
fKinoshita,  H.  (1977).  "Theory  of  the  Rotation  of  the  Rigid  Earth"  Celes.  Mech.  15,  277. 
Kinoshita,  H.,  Nakajima,  K.,  Kubo,  Y.,  Nakagawa,  L,  Sasao,  T.,  and  Yokoyama,  K.  (1979). 

"Note  on  Nutation  in  Ephemerides"  Publ.  Int.  Lat.  Obs.  of  Mizusawa  XII,  71. 
Kolaczek,  B.  and  Weiffenbach,  G.,  eds.  (1974).  "On  Reference  Coordinate  Systems  for 
Earth  Dynamics"  IAU  Colloquium  26,  (Smithsonian  Astrophys.  Obs.,  Cambridge, 
MA). 

Kovalevsky,  J.  (1979).  "The  Reference  Systems"  in  Time  and  the  Earth's  Rotation  D.D. 

McCarthy  and  J.D.H.  Pilkington,  eds.  82  (Reidel,  Dordrecht,  Holland),  p.  151. 
Kovalevsky,  J.  (1980).  "Global  Astrometry  by  Space  Techniques"  Celes.  Mech.  22,  153. 
Kovalevsky,  J.  and  Mueller,  LI.  (1981).  "Comments  on  Conventional  Terrestrial  and  Quasi- 

Inertial  Reference  Systems"  in  Reference  Coordinate  System  for  Earth  DynamicsE.M. 

Gaposchkin  and  B.  Kolaczek,  eds.  IAU  Colloquium  56  (Reidel,  Dordrecht,  Holland), 

p.  375. 

Kovalevsky,  J.  (1985).  "Systemes  de  reference  terrestres  et  celestes"  Bull.  Astronomique 

de  Observatoire  Royal  de  Belgique  10,  87. 
Kovalevsky,  J.  (1989).  "Stellar  Reference  Frames"  in  Reference  Frames  in  Astronomy  and 

Geophysics  J.  Kovalevsky,  I.I.  Mueller  and  B.  Kolaczek,  eds.  (Kluwer,  Dordrecht, 

Holland),  p.  15. 

Kozai,  Y.  (1974).  "Hybrid  Systems  for  Use  in  the  Dynamics  of  Artificial  Satellites"  in  On 
Reference  Coordinate  Systems  for  Earth  Dynamics  B.  Kolaczek  and  G.  Weiffenbach, 
eds.  IAU  Colloquium  26  (Smithsonian  Astrophys.  Obs.,  Cambridge,  MA),  p.  235. 

Larden,  D.  (1980).  "Some  Geophysical  Effects  on  Geodetic  Levelling  Networks"  Proceed- 
ings of  the  Second  International  Symposium  on  Problems  Related  to  the  Redefinition 
of  North  American  Vertical  Geodetic  Networks  (Canadian  Inst,  of  Surveying,  Ottawa). 
tLederle,  T.  and  Schwan,  H.  (1984).  "Procedure  for  Computing  the  Apparent  Places  of 
Fundamental  Stars  (APFS)  from  1984  Onwards"  Astron.  Astrophys.  134,  1. 

Leick,  A.  and  Mueller,  I.I.  (1979).  "Defining  the  Celestial  Pole"  Manus  geodaetica  4,  149. 

Lestrade,  J.-F.,  Requieme,  Y.,  Rapaport,  M.,  and  Preston,  R.A.  (1988).  "Relationship 
Between  the  JPL  Radio  Celestial  Reference  Frame  and  a  Preliminary  FK5  Frame" 
in  The  Earth's  Rotation  and  Reference  Frames  for  Geodesy  and  Geodynamics  A.K. 
Babcock  and  G.A.  Wilkins,  eds.  IAU  Symposium  128  (Reidel,  Dordrecht,  Holland), 
p.  67. 

fLieske,  J.H.,  Lederle,  T.,  Fricke,  W.,  and  Morando,  B.  (1977).  "Expressions  for  the  Pre- 
cession Quantities  Based  upon  the  IAU  (1976)  System  of  Astronomical  Constants" 
Astron.  Astrophys.  58,  1. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


193 


fLieske,  J.H.  (1979).  "Precession  Matrix  Based  on  IAU  (1976)  System  of  Astronomical 
Constants"  Astron.  Astrophys.  73,  282. 
Ma  C.  (1979).  Very  Long  Baseline  Interferometry  Applied  to  Polar  Motion,  Relativity, 
and  Geodesy  NASA  Technical  Memorandum  79582  (Goddard  Space  Flight  Center, 
Greenbelt,  MD). 

Ma,  C.  (1983).  "Geodesy  by  Radio  Interferometry:  A  Precise  Celestial  Reference  Frame" 

'  EOS  Transaction  of  the  American  Geophysical  Union  64,  45,  674. 
Ma,  C,  Clark,  T.A.,  Ryan,  J.W.,  Herring,  T.A.,  Shapiro,  I.I.,  Corey,  B.E.,  Hinteregger, 
H.F.,  Rogers,  A.E.E.,  Whitney,  A.R.,  Knight,  C.A.,  Lundquist,  G.L.,  Shaffer,  D.B., 
Vandenburg,  N.R.,  Pigg,  J-C.,  Schupler,  B.R.  and  Ronnang,  B.O.  (1986).  "Radio- 
source  Positions  from  VLBI"  Astron.  J.  92,  1020. 
Ma,  C,  Himwich,  W.,  Mallama,  A.,  and  Kao,  M.  (1987).  "Earth  Orientation  from  VLBI" 

'  BIU  Annual  Rep.  for  1986  D-ll,  Paris. 
Ma,  C.  (1988).  "The  VLBI  Celestial  Reference  Frame  of  the  NASA  Crustal  Dynamics 
'  Project"  in  The  Earth's  Rotation  and  Reference  Frames  for  Geodesy  and  Geodynam- 
ics A.K.  Babcock  and  G.A.  Wilkins,  eds.  IAU  Symposium  128  (Reidel,  Dordrecht, 
Holland),  p.  73. 

Ma  C.  (1989).  "Extragalactic  Reference  Frames"  in  Reference  Frames  in  Astronomy  and 
Geophysics  J.  Kovalevsky,  LI.  Mueller  and  B.  Koiaczek,  eds.  (Kluwer,  Dordrecht, 
Holland),  p.  43. 

f  Markowitz,  W.  and  Guinot,  B.,  eds.  (1968).  Continental  Drift,  Secular  Motion  of  the  Pole 
and  Rotation  of  the  Earth  IAU  Symposium  32  (Reidel,  Dordrecht,  Holland). 

Markowitz.  W.  (1976).  "Comparison  of  ILS,  IPMS.  BIH  and  Doppler  Polar  Motions  with 
Theoretical"  Rep.  to  IAU  Comm.  19  and  31,  IAU  Gen.  Assembly,  Grenoble. 

Markowitz,  W.  (1979).  "Independent  Polar  Motions,  Optical  and  Doppler:  Chandler  Un- 
certainties" Rep.  to  IAU  Comm.  19  and  31,  IAU  Gen.  Assembly,  Montreal. 

Mather,  R.S.,  Coleman,  R„  Rizos,  C,  and  Hirsch,  B.  (1977).  "The  Role  of  Non-tidal 
Gravity  Variations  in  the  Maintenance  of  Reference  Systems  for  Secular  Geodynam- 
ics" UNISURV  G  26,  1-25. 

Mather,  R.S.,  Masters,  E.G.,  and  Coleman,  R.  (1977).  "A  preliminary  Analysis  of  GEOS-3 
Altimeter  Data  in  the  Tasman  and  Coral  Seas"  UNISURV  G  26,  27-46. 

Mather,  R.S.  and  Larden,  D.R.  (1978).  "On  the  Recovery  of  Geodynamics  Information 
from  Secular  Gravity  Change"  UNISURV  G  29,  11-22. 

McCarthy,  D.D.  and  Pilkington,  J.D.H.,  eds.  (1979).  Time  and  the  Earth's  RotationlAU 
Symposium  82  (Reidel,  Dordrecht,  Holland). 

McClure,  P.  (1973).  Diurnal  Polar  Motion  GSFC  Report  X-592-73-259  (Goddard  Space 
Flight  Center.  Greenbelt,  MD). 

Melbourne,  W.,  Anderle,  R.,  Feissel,  M.,  King,  R.,  McCarthy,  D.D.,  Smith,  D..  Tapley,  B., 
and  Vicente,  R.  (1983).  "Project  MERIT  standards"  United  States  Naval  Observatory 
Circular  167  (U.S.  Naval  Observatory,  Washington). 

Melchior,  P.  and  Yumi,  S.,  eds.  (1972).  Rotation  of  the  Earth  IAU  Symposium  48  (Reidel, 
Dordrecht,  Holland). 

Melchior,  P.  (1978).  The  Tides  of  the  Planet  Earth  (Pergamon  Press,  Oxford,  England). 
Minster,  J.B.  and  Jordan,  T.H.  (1978).  "Present-day  Plate  Motions"  J.  Geophys.  Res.  83, 
Bll,  5331. 

Molodenskij,  M.S.  (1961).  "The  Theory  of  Nutation  and  Diurnal  Earth  Tides"  Quatrieme 
Symposium  International  sur  les  marees  terrestres,  Bruxelles,  P.  Melchior,  ed.  Com- 
munications de  l'Observatoire  Royal  de  Belgique,  No.  188,  and  Serie  Geophysique, 
No.  58,  25. 


194 


EXPLANATORY  SUPPLEMENT 


Morabito,  D.D.,  Preston,  R.A.,  Linfield,  R.P.,  Slade,  M.A.,  and  Jauncey,  D.L.  (1986). 
"Arcsecond  Positions  for  Milliarcsecond  VLBI  Nuclei  of  Extragalactic  Radio  Sources: 
IV,  Seventeen  Sources"  Astron,  J,  92,  546. 
Moran,  J.M.  (1974).  "Geodetic  and  Astrometric  Results  of  Very  Long-Baseline  Interfero- 
metric  Measurements  of  Natural  Radio  Sources"  in  On  Reference  Coordinate  Systems 
for  Earth  Dynamics  B.  Kolaczek  and  G.  Weiffenbach,  eds.  IAU  Colloquium  26  (Smith- 
sonian Astrophys.  Obs.,  Cambridge,  MA),  pp.  269-292. 
f  Morgan,  H.R.  (1952).  "Results  of  Observations  with  the  Nine-Inch  Transit  Circle  1913— 
1926"  Publication  of  the  United  States  Naval  Observatory  Second  Series,  XIII,  Pt.  III. 
f  Moritz,  H.  (1967).  Dept.  of  Geod.  Sci.  Rep.  92,  (Ohio  State  University,  Columbus). 

Moritz,  H.  (1979).  Dept.  of  Geod.  Sci.  Rep.  294,  (Ohio  State  University,  Columbus). 
tMoyer,  T.D,  (1981).  "Transformation  from  Proper  Time  on  Earth  to  Coordinated  Time 
in  Solar  System  Barycentric  Space-Time  Frame  of  Reference  (parts  1  and  2)"  Celes. 
Mech.  23,  33  and  57. 

f  Mueller,  LI.  (1969).  Spherical  and  Practical  Astronomy  as  Applied  to  Geodesy  (Ungar, 
New  York). 

Mueller,  I.I.  {1975}.  "Tracking  Station  Positioning  from  Artificial  Satellite  Observations" 

Geophys  Surveys  2  243-276 
Mueller,  1. 1.,  ed.  (1975).  Proceedings  of  the  Geodesy/Solid  Earth  and  Ocean  Physics 

(GEOP)  Research  Conferences  1972-1974.  Dept.  of  Geod.  Sci.  Rep.  231  (Ohio  State 

University,  Columbus). 
Mueller,  I.I.,  ed.  (1978).  "Applications  of  Geodesy  and  Geodynamics.  An  International 

Symposium"  Proceedings  of  the  Geodesy/Solid  Earth  and  Ocean  Physics  (GEOP) 

Research  Conference  October  2-5,  1978,  Columbus,  OH  Dept.  of  Geod.  Sci.  Rep.  280 

(Ohio  State  University,  Columbus). 
Mueller,  I.I.  (1981).  "Reference  Coordinate  System  for  Earth  Dynamics:  A  Preview"  in 

Reference  Coordinate  System  for  Earth  Dynamics  E.M.  Gaposchkin  and  B.  Kolaczek, 

eds.  IAU  Colloquium  56  (Reidel,  Dordrecht,  Holland),  p.  1. 
Mueller,  I.I.  (1985).  "Reference  Coordinate  Systems  and  Frames:  Concepts  and  Realiza- 
tion" Bull.  Geod.  59,  181. 
Mueller,  1. 1.,  ed.  (1985).  Proceedings  of  the  International  Conference  on  Earth  Rotation 

and  the  Terrestrial  Reference  Frame  (Dept.  of  Geod.  Sci.  and  Surveying,  Ohio  State 

University). 

Mueller,  I.I.  and  Wilkins,  G.A.  (1986).  "Earth  Rotation  and  the  Terrestrial  Reference 

Frame"  Adv.  Space  Res.  6,  9,  5. 
Muhleman,  D.O.,  Berge,  G.L.,  Rudy,  D.J.,  Niell,  A.E.,  Linfield,  R.P.,  and  Standish,  E.M. 

Jr.  (1985).  "Precise  Position  Measurements  of  Jupiter,  Saturn  and  Uranus  Systems 

with  Very  Large  Array"  Celes.  Mech.  37,  329. 
Murray,  C.A.  (1979).  "The  Epherneris  Reference  Frame  for  Astrometry"  in  Time  and  the 

Earth's  Rotation  D.D.  McCarthy  and  J.D.H.  Pilkington,  eds.  82  (Reidel,  Dordrecht, 

Holland),  p.  165. 

t  Murray,  C.A.  (1981).  "Relativistic  Astrometry"  Mon.  Not.  R.  Astr.  Soc.  195,  639. 
I  Murray,  C.A.  (1983).  Vectorial  Astrometry  (Hilger,  Bristol,  England). 

f  Newcomb,  S.  (1895).  The  Elements  of  the  Four  Inner  Planets  and  the  Fundamental  Con- 
stants supplement  to  the  American  Epherneris  and  Nautical  Almanac  (USGPO,  Wash- 
ington, DC). 

Newhall,  XX,  Preston,  R.A.,  and  Esposito,  P.B.  (1986).  "Relating  the  JPL  VLBI  Reference 
Frame  and  Planetary  Ephemertdes"  in  Astrometric  Techniques  H.K.  Eichhorn  and 
R.J.  Leacock,  eds.  IAU  Symposium  109  (Reidel,  Dordrecht,  Holland),  p.  789. 


3  /  CELESTIAL  REFERENCE  SYSTEMS  1 95 

Newhall,  XX,  Williams,  J.G.,  and  Dickey,  J.O.  (1987).  "Earth  Rotation  (UTOR)  from 
Lunar  Laser  Ranging"  BIH  Annual  Rep.  for  1986  D-29,  Paris. 

Newton,  I.  (1968).  "Experimental  Evidence  for  a  Secular  Decrease  in  the  Gravitational 
Constant  G"  J.  Geophys.  Res.  73,  12,  3765. 

Newton,  R.R.  (1974).  "Coordinates  Used  in  Range  or  Range-Rate  Systems  and  Their  Ex- 
tension to  a  Dynamic  Earth"  in  On  Reference  Coordinate  Systems  for  Earth  Dynamics 
B.  Kolaczek  and  G.  Weiffenbach,  eds.  IAU  Colloquium  26  (Smithsonian  Astrophys. 
Obs.,  Cambridge,  MA),  pp.  181-200. 
|  Paris  Conference  (1911).  Congress  International  des  Ephemerides  Astronomiques  tenu  a 
1'Observatoire  de  Paris  du  23  au  26  October  1911. 

Perley,  R.A.  (1982).  "The  Positions,  Structures  and  Polarizations  of  404  Compact  Radio 
Sources"  Astron.  J.  87,  859. 
|  Porter,  J.G.  and  Sadler,  D.H.  (1953).  "The  Accurate  Calculation  of  Apparent  Places  of 
Stars"  Mon.  Not.  R.  Astr.  Soc.  113,  455. 

Prochazka,  F.V.  and  Tucker,  R.H.,  eds.  (1978).  Modern  Astrometry  IAU  Colloquium,  48 
(University  Observatory,  Vienna). 
tPuIkova  (1956).  Refraction  tables  of  Pulkova  Observatory  4th  edition,  (Academy  of  Sci- 
ences Press,  Moscow,  Leningrad). 

Purcell,  G.H.  Jr.,  Cohen,  E.J.,  Fanselow,  J.L.,  Rogstad,  D.H.,  Skjerve,  L.J.,  Spitzmesser, 
D.J.,  and  Thomas,  J.B.  (1978).  "Current  Results  and  Developments  in  Astrometric 
VLBI  at  the  Jet  Propulsion  Laboratory"  in  Modern  Astrometry  F.V.  Prochazka  and 
R.H.  Tucker,  eds.  IAU  Colloquium  48  (University  Observatory,  Vienna),  p.  185. 

Purcell,  G.H.,  Jr.,  Fanselow,  J.L.,  Thomas,  J.B.,  Cohen,  E.J.,  Rogstad,  D.H.,  Sovers,  O.J., 
Skjerve,  L.J.,  and  Spitzmesser,  D.J.  (1980).  "VLBI  Measurements  of  Radio  Source 
Positions  at  the  Jet  Propulsion  Laboratory"  Radio  Interferometry  Techniques  for 
Geodesy  NASA  Conference  Publication  2115  (NASA  Scientific  and  Tech.  Information 
Office,  Washington,  DC),  p.  165. 

Reasenberg,  R.D.  (1986).  "Microsecond  Astrometric  Interferometry"  in  Astrometric  Tech- 
niques H.K.  Eichhorn,  and  R.J.  Leacock,  eds.  IAU  Symposium  109  (Reidel,  Dordrecht, 
Holland),  p.  321. 

Reigber,  Ch.,  Schwintzer,  P.,  Mueller,  H.,  and  Massmann,  F.H.  (1987).  "Earth  Rotation 
from  Laser  Ranging  to  LAGEOS:  Station  Coordinates  from  Laser  Ranging  to  LA- 
GEOS"  BIH  Annual  Rep.  for  1986  D-39,  Paris. 

Robertson,  D.S.,  Fallon,  F.W.,  and  Carter,  W.E.  (1986).  "Celestial  Reference  Coordi- 
nate Systems:  Submilliarcsecond  Precision  Demonstrated  with  VLBI  Observations" 
Astron.  J.  91,  1456. 

1  Saastamoinen  J.  (1972).  "Introduction  to  Practical  Computation  of  Astronomical  Refrac- 
tion" Bull.  Geod.  106,  383. 
tSAOC  (1966).  Smithsonian  Astrophysical  Observatory  Star  Catalog,  Positions  and  Proper 
Motions  of  258997  Stars  for  the  Epoch  and  Equinox  of  1950. 0  Smithsonian  Publication 
4652  (Smithsonian  Institution,  Washington,  DC). 

Schutz,  B.E.,  Tapley,  B.D..  and  Eanes,  R.J.  (1987).  "Earth  Rotation  from  LAGEOS  Laser 
Ranging"  BIH  Annual  Rep.  for  1986  D-33,  Paris. 

Schwan,  H.  (1986).  "A  New  Technique  for  the  Analytical  Determination  of  a  Fundamental 
System  of  Positions  and  Proper  Motions"  in  Astrometric  Techniques  H.K.  Eichhorn 
and  R.J.  Leacock,  eds.  IAU  Symposium  109  (Reidel,  Dordrecht,  Holland),  p.  63. 

Schwan,  H.  (1988).  "Construction  of  the  System  of  Positions  and  Proper  Motions  in  the 
FK5"  in  Mapping  the  Sky  S.  Debarbat,  J. A.  Eddy,  H.K.  Eichhorn,  and  A.R.  Upgren, 
eds.  IAU  Symposium  133  (Kluwer,  Dordrecht,  Holland),  p.  151. 


196 


EXPLANATORY  SUPPLEMENT 


Schwiderski,  E.  (1978).  "Global  Ocean  Tides,  Part  1;  A  Detailed  Hydrodynamical  In- 
terpolation Model,  US  Naval  Surface  Weapons  Center  TR-3866  (U.S.  Naval  Surface 
Weapons  Center,  Dahlgren,  Virginia). 
Scott,  F.P.  and  Hughes,  J.A.  (1964).  "Computation  of  Apparent  Places  for  the  Southern 
Reference  Star  Program"  Astron.  J.  69,  368. 
t  Scott,  F.P.  (1964).  "A  Method  for  Evaluating  the  Elliptic  E  Terms  of  the  Aberration" 
Astron.  J.  69,  372. 

Seidelmann,  P.K.  (1982).  "1980  IAU  Theory  of  Nutation:  The  Final  Report  of  the  IAU 
Working  Group  on  Nutation"  Celes.  Mech.  27,  79. 
f  Shapiro,  I.I.  (1967).  "New  Method  for  the  Detection  of  Light  Deflection  by  Solar  Gravity" 
Science  157,  806. 

Smart,  W.M.  (1944).  Text-book  in  Spherical  Astronomy  4th  edition  (Cambridge  University 

Press,  Cambridge,  England). 
Smith,  C.A.  (1986).  "On  Desiderata  for  Star  Catalogs  for  the  Remainder  of  the  Twentieth 

Century:  A  Report  on  Catalog  Work  Now  in  Progress  at  the  U.S.  Naval  Observatory" 

in  Astrometric  Techniques  H.K.  Eichhorn  and  R.J.  Leacock,  eds.  IAU  Symposium  109 

(Reidel,  Dordrecht,  Holland),  p.  669. 
f  Smith,  C.A.,  Kaplan,  G.H.,  Hughes,  J. A.,  Seidelmann,  P.K.,  Yallop,  B.D.,  and  Hohenkerk. 

C.Y.  (1988).  "Mean  and  Apparent  Place  Computations  in  the  New  IAU  System.  I. 

The  Transformation  of  Astrometric  Catalog  Systems  to  the  Equinox  J2000.0"  Astron. 

J.  97,  265. 

Solomon,  S.C.  and  Sleep,  N.H.  (1974).  "Some  Simple  Physical  Models  for  Absolute  Plate 

Motions"  J.  Geophys.  Res.  79,  17,  2557. 
Sovers,  O.J.,  Edwards,  C,  Jacobs,  C,  Lanyi,  G.,  Liewer,  K.,  and  Treuhaft,  R.  (1989). 

"Astrometric  Results  of  1978-1985  Deep  Space  Network  Radio  Interferometry:  The 

JPL  1987-1  Extragalactic  Source  Catalog"  Astron.  J.  95,  1647. 
tStandish,  E.M.  Jr.  (1982a).  "Orientation  of  the  JPL  Ephemerides,  DE200/LE200,  to  the 

Dynamical  Equinox  of  J2000.0"  Astron.  Astrophys.  114,  297. 
tStandish,  E.M.  Jr.  (1982b).  "Conversion  of  Positions  and  Prop  er  Motions  from  B1950.0 

to  IAU  System  at  J2000.0"  Astron.  Astrophys.  115,  20. 
Stolz,  A.  and  Larden,  D.R.  (1979).  "Seasonal  Displacement  and  Deformation  of  the  Earth 

by  the  Atmosphere"  J.  Geophys.  Res.  84,  Bll,  6185. 
fStumpff,  P.  (1979).  "The  Rigorous  Treatment,  of  Stellar  Aberration  and  Doppler  Shift, 

and  the  Barycentric  Motion  of  the  Earth"  Astron.  Astrophys.  78,  229. 
fStumpff,  P.  (1980a).  "On  the  Relationship  between  Classical  and  Relativistic  Theory  of 

Stellar  Aberration"  Astron.  Astrophys.  84,  257. 
fStumpff,  P.  (1980b).  "Two  Self-Consistent  Fortran  Subroutines  for  the  Computation  of 

the  Earth's  Motion"  Astron.  Astrophys.  Supp.  Ser.  41,  1. 
fStumpff,  P.  (1985).  "Rigorous  Treatment  of  the  Heliocentric  Motion  of  Stars"  Astron. 

Astrophys.  144,  232. 

Stumpff,  P.  (1986).  "Relativistic  and  Perspective  Effects  in  Proper  Motions  and  Radial 
Velocities  of  Stars"  in  Relativity  in  Celestial  Mechanics  and  Astronomy  J.  Kovalesky 
and  V.A.  Brumberg,  eds.  IAU  Symposium  114,  (Reidel,  Dordrecht,  Holland),  p.  193. 
f  Taff,  L.G.  (1981).  Computational  Spherical  Astronomy  (Wiley,  New  York), 
t  The  Astronomical  Almanac  (1984).  (U.S.  Government  Printing  Office,  Washington,  and 
HM  Stationery  Office,  London). 
Van  Altena,  W.  (1978).  "Space  Telescope  Astrometry"  in  Modern  Astrometry  F.V.  Proc- 
hazka  and  R.H.  Tucker,  eds.  IAU  Colloquium  48,  (University  Observatory,  Vienna), 
p.  561. 


3  /  CELESTIAL  REFERENCE  SYSTEMS 


197 


Van  Flandern  T  C  (1981).  "The  Introduction  of  the  Improved  IAU  System  of  Astronom- 
ical  Constants  Time  Scales  and  Reference  Frame  into  The  Astronomical  Almanac" 
The  Supplement  to  the  Astronomical  Almanac  1984  (U.S.  Government  Printing  Office, 
Washington,  and  HM  Stationery  Office,  London),  p.  S26. 
Van  Hylckama,  T.E.A.  (1956).  "The  Water  Balance  of  the  Earth"  Drexel  Institute  of 

Technology,  Publications  in  Climatology  9,  59-117. 
Vanicek,  P.  (1980).  "Tidal  Corrections  to  Geodetic  Quantities"  NOAA  Tech.  Rep.  NOS 

83  NGS  14  (NOS/NOAA,  Rockville,  MD). 
Vondrak  J.  (1983).  "On  the  Indirect  Influence  of  the  Planets  on  Nutation.  I.  Effects  of 
Planetary  Perturbations  in  Lunar  Orbit"  Bull.  Astron.  Inst.  Czechosl.  34,  184. 
t  Vondrak  J.  (1983).  "On  the  Indirect  Influence  of  the  Planets  on  Nutation.  II.  Effects  of 
Planetary  Perturbations  of  the  Earth's  Orbit"  Bull.  Astron.  Inst.  Czechosl.  34,  311. 
Wade  C  M  and  Johnston,  K.J.  (1977).  "Precise  Positions  of  Radio  Sources.  V.  Positions 
of  36  Sources  on  a  Baseline  of  35  km"  Astron.  J.  82,  791.  Erratum  Astron.  7  84,  1932. 
Wahr  J.M.  (1979).  "The  Tidal  Motions  of  a  Rotating,  Elliptical,  Elastic  and  Oceanlcss 
Earth"  Ph.D.  thesis  (Dept.  of  Physics,  University  of  Colorado,  Boulder), 
f  Wahr,  J.M.  (1981).  "The  Forced  Nutations  of  an  Ellipitical,  Rotating,  Elastic,  and  Ocean- 
less  Earth"  Geophys.  J.  R.  Astr.  Soc.  64,  705. 
Washington  (1904).  Tables  XXVI  XXXIV  of  "Reduction  Tables  for  Transit  Circle  Ob- 
servations" Publications  of  the  United  States  Naval  Observatory,  Second  Series,  4, 

Wilkti^G.A^nd  Mueller,  LI.  (1986).  "Joint  Summary  Report  of  the  IAU/IUGG  Working 
Groups  on  the  Rotation  of  the  Earth  and  Terrestrial  Reference  System   in  Highlights 
of  Astronomy  J.P.  Swings  IAU  Symposium  7  (Reidel,  Dordrecht,  Holland),  p.  771 
Williams  J.G.  and  Melbourne,  W.G.  (1982).  "Comments  on  the  Effect  of  Adopting  New 
Precession  and  Equinox  Corrections"  in  High-precision  Earth  Rotation  and  Earth- 
Moon  Dynamics  O.  Calame,  ed.  IAU  Colloquium  63  (94),  (Reidel,  Dordrecht,  Hol- 
land), p.  293.  ,      „,  .c 
Williams,  J.G.,  Dickey,  J.O.,  Melbourne,  W.G.,  and  Standish,  E.M.  Jr.  (1983).  Unifica- 
tion of  Celestial  and  Terrestrial  Coordinate  Systems"  Proceedings  of  IAG  Symposia, 
IUGG  XVIII  General  Assembly,  Hamburg,  2  (Dept  of  Geod.  Sci.  and  Surveying,  Ohio 
State  University),  p.  493. 
Williams,  J.G.  and  Standish,  E.M.  Jr.  (1989).  "Dynamical  Reference  Frames  in  the  Plan- 
etary and  Earth-Moon  Systems"  in  Reference  Frames  in  Astronomy  and  Geophysics 
J.  Kovalevsky,  I.I.  Mueller  and  B.  Kotaczek,  eds.  (Kluwer,  Dordrecht,  Holland  ,  p.  bt. 
Willis,  J.E.  (1941).  "A  Determination  of  Astronomical  Refraction  from  Physical  Data 

Transactions  of  the  American  Geophysical  Union,  part  II,  324. 
Winkler,  G.M.R.  and  Van  Flandern,  T.C.  (1977).  "Ephemeris  Time,  Relativity,  and  the 
Problems  of  Uniform  Time  in  Astronomy"  Astron.  J.  82,  84. 
fWoolard,  E.W.  and  Clemence,  G.M.  (1966).  Spherical  Astronomy  (Academic  Press,  New 

York  and  London).  nfR 
t  Yallop,  B.D.  (1984).  in  The  Astronomical  Almanac  1984  (U.S.  Government  Printing  Omce, 

Washington,  and  HM  Stationery  Office,  London),  pp.  B16-B41. 
t  Yallop,  B.D.,  Hohenkerk,  C.Y.,  Smith,  C.A.,  Kaplan,  G.H.,  Hughes,  J.A.,  and  Seidelmann, 
P.K.  (1989).  "Mean  and  Apparent  Place  Computations  in  the  New  IAU  System. 
II.  Transformation  of  Mean  Star  Places  from  FK4  B1950.0  to  FK5  J2000.0  Us.ng 
Matrices  in  6-space"  Astron.  J.  97,  274. 
tYatskiv,  Y.S.  (1980).  "Nearly  Diurnal  Free  Polar  Motion  Derived  from  Astronomical  Lat- 
itude and  Time  Observations"  in  Nutation  and  the  Earth's  Rotation  E.P.  I-edorov, 


198 


EXPLANATORY  SUPPLEMENT 


M.L.  Smith  and  P.L.  Bender,  eds.  IAU  Symposium  78  (Reidel,  Dordrecht,  Holland) 
p.  59. 

Zhu,  S.Y.  and  Mueller,  I.I.  (1983).  "Effects  of  Adopting  New  Precession,  Nutation  and 

Equinox  Corrections  on  the  Terrestrial  Reference  Frame"  Bull.  Geodes.  57,  29. 
Zverev,  M.Z.,  Polozhentsev,  D.D.,  Stepanova,  E.E.,  Khrutskaya,  E.V.,  Yagudin,  L.I.,  and 

Polozhentsev,  A.D.  (1986).  "On  the  SRS  Catalogue"  in  Astrometric  Techniques  H.K. 

Eichhorn  and  R.J.  Leacock,  eds.  IAU  Symposium  109  (Reidel,  Dordrecht,  Holland) 

p.  691. 


CHAPTER 


Terrestrial  Coordinates 
and  the  Rotation  of  the  Earth 

by  Brent  A.  Archinal 


4.1  INTRODUCTION 

The  task  of  establishing  or  defining  the  terrestrial  coordinates  of  a  point  is  inextrica- 
bly linked  to  establishing  the  rotation  of  the  Earth  over  time.  The  definition  of  any 
terrestrial  reference  coordinate  system  (TRS)  is  given  by  establishing  a  celestial 
reference  coordinate  system  (CRS)  and  a  suitable  transformation  between  them. 
This  transformation  is  what  is  generally  called  Earth  rotation  (or  Earth  orienta- 
tion), including  the  various  changes  in  the  orientation  of  the  Earth's  axis  in  space 
and  internally,  and  the  rotation  (and  rotational  variations)  about  that  axis.  (This 
latter  rotation  is  also  often  defined  as  Earth  rotation — both  uses  of  this  term  will 
be  made  here  with  the  meaning  being  given  from  context.)  One  could  connect  the 
celestial  and  terrestrial  coordinate  system  at  any  given  instant  using  three  Eulerian 
angles,  and  then  form  a  time  series  of  such  angles  to  define  Earth  rotation.  However, 
for  historical  reasons  {mostly  in  order  to  associate  the  motions  of  the  Earth  with 
physical  processes  and  to  allow  for  successive  approximations  of  the  motion),  in 
practice  these  angles  are  expressed  in  terms  of  precession,  nutation,  polar  motion, 
and  rotation  about  the  Earth's  axis. 

Before  we  proceed  into  any  explanation  of  terrestrial  coordinates,  it  is  also  nec- 
essary to  distinguish  between  a  (celestial  or  terrestrial)  "reference  system"  and  a 
"reference  frame."  A  reference  systern'm  the  conceptual  definition  of  an  "ideal'  coor- 
dinate system,  based  on  some  abstract  principle(s).  For  example,  an  ideal  terrestrial 
system  would  be  one  in  which  the  Earth's  crust  shows  only  deformation  with  no 
rotations  or  translations.  A  conventional  reference  system  is  one  where  the  model 
used  to  define  coordinates  is  given  in  detail;  that  is,  specific  model  choices  have 
been  made.  The  realization  of  such  a  conventional  reference  system,  using  actual 

199 


200  EXPLANATORY  SUPPLEMENT 

observations,  adopted  station  coordinates,  etc.,  provides  a  conventional  reference 
frame  (Kovalevsky  and  Mueller,  1981;  Mueller,  1988;  Kovalevsky  et  al,  1989). 

This  chapter  initially  will  provide  the  basic  concepts  of  various  adopted  terres- 
trial reference  frames  (mostly  based  on  the  use  of  reference  ellipsoids),  and  of  the 
Conventional  Terrestrial  Reference  Coordinate  System  (CTRS)  as  it  is  currently 
realized  by  the  International  Earth  Rotation  Service  (IERS).  Also  included  is  in- 
formation on  the  actual  transformation  of  coordinates  from  one  frame  to  another. 
This  will  be  followed  by  information,  mostly  extracted  from  the  IERS  Standards 
(McCarthy,  1990),  regarding  the  Earth's  gravity  field  (to  a  limited  extent),  tides, 
and  plate  tectonics.  Methods  for  monitoring  the  Earth's  rotation  (past,  present,  and 
future)  are  described  and  information  on  the  IERS  is  provided.  Finally,  a  summary 
of  determinations  of  historical  variations  in  the  rotation  of  the  Earth's  axis  is  given. 

An  overview  of  Earth  rotation  and  its  causes  in  general  has  not  been  given 
because  space  is  lacking  for  such  a  complete  treatment,  and  the  ample  coverage  from 
this  viewpoint  by  Teisseyre  (1989),  Moritz  and  Mueller  (1987),  Lambeck  (1980), 
and  Munk  and  MacDonald  (1960).  The  motion  of  the  Earth's  celestial  pole  due  to 
precession  and  nutation  has  already  been  covered  in  Chapter  3.  (Readers  seeking 
more  detailed  information  on  the  subjects  of  gravity,  geodesy,  geodetic  astronomy, 
and  terrestrial  reference  systems  should  consult  standard  texts  such  as  Mueller  and 
Rockie,  1966;  Heiskanen  and  Moritz,  1967;  Mueller,  1969;  Bomford,  1971;  Moritz, 
1980;  Torge,  1980;  Moritz  and  Mueller,  1987;  Kovalevsky  et  al,  1989.)  McCarthy 
(1990)  also  provides  further  information  on  accepted  models  of  effects  on  various 
space  geodetic  systems. 


4.2    TERRESTRIAL  COORDINATE  SYSTEMS 

In  this  section  the  fundamentals  of  various  terrestrial  coordinate  systems  are  pre- 
sented, covering  both  the  various  worldwide  and  common  local  systems  used  to 
define  the  coordinates  of  an  object  on  or  near  the  Earth's  surface.  It  includes  the 
necessary  explanations  of  the  common  abstract  representations  of  the  Earth's  sur- 
face, such  as  with  the  geoid  or  various  ellipsoids.  It  ends  with  information  on  the 
current  Conventional  Terrestrial  Reference  Coordinate  System,  as  it  is  realized  by 
the  IERS  Terrestrial  Coordinate  System. 

4.21    The  Figure  of  the  Earth  and  the  Reference  Ellipsoid 

Most  terrestrial  coordinate  systems  for  measuring  positions  near  the  Earth's  surface 
use  as  their  reference  an  abstract  surface  near  that  of  the  Earth.  A  best-fitting 
rotational  ellipsoid  is  most  commonly  assumed  as  an  approximation  to  the  surface 
of  the  Earth.  A  rotational  ellipsoid  is  used,  since  it  represents  the  shape  of  the 
Earth  far  better  than  a  sphere,  because  of  the  flattening  of  the  Earth  at  the  poles, 


TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 


201 


Topography 
Geop  (through  p) 
Geoid 
Ellipsoid 


Figure  4.21.1 

The  Earth's  surface  and  reference  surfaces 


and  yet  is  still  a  fairly  simple  mathematical  surface.  (A  more  complicated  surface, 
such  as  a  triaxial  ellipsoid,  will  not  greatly  improve  the  representation,  but  will 
greatly  complicate  the  mathematics  involved  in  using  it.)  Such  a  reference  surface 
has  proven  useful  for  referencing  the  position  of  points  and  measurements  on  or  near 
the  Earth's  surface.  Reference  ellipsoids  may  be  either  local  or  terrestrial,  depending 
on  whether  they  are  an  approximation  for  a  given  area  or  the  entire  Earth. 

Another  type  of  hypothetical  surface  that  proves  useful  for  referencing  obser- 
vations is  a  geopotential  surface,  or  geop,  a  surface  of  equal  gravity  potential.  (In 
geodesy,  gravity  includes  both  the  effects  of  gravitational  potential  and  potential 
due  to  centrifugal  force.)  The  gravity  vector  is  perpendicular  to  the  geop  at  every 
point.  Such  a  definition  is  quite  natural  when  most  instruments  operated  on  the 
surface  of  the  Earth  are  sensitive  to  local  gravity  (through  the  use  of  a  plumb  bob, 
bubble  level,  pool  of  Mercury,  etc.).  It  is  also  critical  for  any  hydrologic  purpose, 
where  any  water  surface  closely  follows  a  geop,  and  where  water  flows  "downhill" 
from  a  geop  of  higher  potential  to  one  of  lower  potential.  A  particular  geop  of 
great  importance  is  the  geoid,  a  geop  whose  potential  is  defined  to  be  that  of  the 
Earth  at  sea  level.  Many  different  definitions  have  been  given  in  the  past  for  the 
geoid,  perhaps  the  best  conceptually  being  an  imaginary  "surface  coinciding  with 
mean  sea-level  in  the  oceans,  and  lying  under  the  land  at  the  level  to  which  the 
sea  would  reach  if  admitted  by  small  frictionless  channels"  (Bomford,  1971).  Vari- 
ous other  definitions  are  given  in  Heiskanen  and  Moritz  (1967,  pp.  48-50);  Moritz 
(1980,  p.  6);  and  Torge  (1980,  pp.  2-3).  In  practice,  the  average  gravity  potential 
of  the  Earth  at  sea  level  is  determined  empirically  (nowadays  usually  via  altimet- 
ric  measurements  of  the  world's  oceans  by  satellite),  and  the  surface  of  the  same 
potential  is  by  definition  the  geoid.  The  geoid  surface  is  then  effectively  the  same 
surface  usually  referred  to  as  mean  sea  level. 

The  over  all  situation  is  shown  in  Figure  4.21.1.  The  observer  is  at  point  p 
on  the  surface  of  the  Earth  (topography).  A  reference  ellipsoid  (particularly  a  local 
one)  approximates  the  geoid  and  lies  generally  below  the  topography.  A  geop  passes 
through  p,  but  the  geoid  itself  lies  close  to  the  reference  ellipsoid.  Note  that  although 


202 


EXPLANATORY  SUPPLEMENT 


Figure  4.22.1 

Geocentric  and  geodetic  latitude 


the  geop  and  geoid  surfaces  are  not  the  same  as  that  of  the  topography,  there  are 
some  similarities  since  the  mass  of  the  topography  influences  the  local  gravity.  Also 
shown  in  the  figure  are  the  geoid  undulation  (A/),  which  is  the  height  of  the  geoid 
above  the  ellipsoid,  the  ellipsoidal  height  (h),  which  is  the  height  of  p  above  the 
ellipsoid,  and  the  mean  sea  level  height  or  orthometric  height  (H),  which  is  the 
height  of  p  above  the  geoid.  Note  that: 

N~h  —  H.  (4.21-1) 

This  relationship  is  approximate  since  H  is  actually  measured  along  the  curved 
vertical  or  plumb  line  through  p,  whereas  h  and  N  are  measured  along  a  straight, 
line  through  p  perpendicular  to  the  ellipsoid. 

4.22   Geocentric,  Geodetic,  and  Astronomical  Coordinates 

Various  coordinate  systems  exist  for  measuring  longitude  and  latitude.  Geocen- 
tric coordinates  are  determined  from  the  center  of  the  Earth;  geodetic  coordinates 
are  determined  relative  to  a  reference  ellipsoid;  and  astronomical  (or  geographic) 
coordinates  are  determined  relative  to  the  observer's  local  vertical.  Figure  4.22.1 
illustrates  the  difference  between  geocentric  and  geodetic  latitude,  once  again  for 
a  point  p  on  the  Earth's  surface.  The  geocentric  latitude  <j>'  is  the  angle  between 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 


203 


z 


Figure  4.22.2 

Astronomic  latitude  and  longitude 


the  ellipsoidal  equator  and  line  from  p  to  the  center  of  the  ellipsoid.  The  geodetic 
latitude  0  is  the  angle  between  the  ellipsoidal  equator  and  the  normal  from  p  to 
the  ellipsoid  (at  point  p')\  a  and  b  are  the  semi-major  and  semi-minor  axes  of  the 
ellipsoid,  respectively;  /,  the  flattening,  or  1  //,  the  inverse  flattening,  is  often  used, 
with 


a 

The  geocentric  longitude  (A)  is  defined  by  the  angle  between  the  reference  (or  zero) 
meridian  and  the  meridian  of  point  p  (and  p'),  measured  eastward  around  the  Earth 
from  0°  to  360°  (IAU,  1983,  p.  47).  The  geodetic  longitude  will  be  the  same  as  the 
geocentric  longitude  if  the  reference  ellipsoid  has  been  chosen  with  the  same  axes 
and  reference  meridian  as  the  Earth — this  is  assumed  to  be  the  case  in  further 
discussion  here.  The  astronomical  coordinates  of  point  p  are  determined  relative  to 
the  local  vertical  direction  (or  zenith)  at  point  p  (see  Figure  4.22.2,  where  z  indicates 
the  direction  of  the  zenith  and  z'  the  direction  of  the  ellipsoidal  normal).  A  vertical 
(or  plumb)  line  passing  through  p  will  intersect  the  Earth's  equatorial  plane  with 
the  angle  the  astronomical  latitude  of  p.  Astronomical  longitude  A  is  measured 
as  the  angle  between  the  reference  meridian  plane  and  the  plane  including  the  local 
vertical  through  p  and  perpendicular  to  the  equatorial  plane.  Note  that  the  local 


204 


EXPLANATORY  SUPPLEMENT 


Figure  4,22.3 

Deflection  of  the  vertical  on  a  unit  sphere 


vertical  does  not  necessarily  pass  through  the  Earth's  axis.  The  angle  between  the 
local  vertical  direction  and  ellipsoidal  normal  through  p  is  known  as  the  deflection 
of  the  vertical  9.  The  deflection  of  the  vertical  is  often  broken  into  two  orthogonal 
components  (see  Figure  4.22.3,  where  z  indicates  the  direction  of  the  zenith,  and  zf 
the  direction  of  the  ellipsoidal  normal),  one  £  being  in  the  meridional  direction,  the 
other  Tj  in  the  orthogonal  prime  vertical  direction.  Relations  between  the  geodetic 
and  astronomical  longitude  and  latitude  and  these  components  of  the  deflection  of 
the  vertical  are 

sin  <f>  =  cos  ?;  sin($  -  f),  (4.22-2) 
sin  t?  =  cos  4>  sin( A  -  A).  (4.22-3) 

Using  small-angle  formulas,  these  can  also  be  given  as 

£  =  (4.22-4) 
7?  =  (A- A)cos0.  (4.22-5) 

As  to  the  measurement  of  the  "height"  of  point  p,  several  types  of  "height" 
measurements  are  possible,  referred  either  to  a  nearby  surface,  such  as  the  geoid 
or  ellipsoid,  or  to  the  center  of  the  Earth.  The  ellipsoidal  height  h,  and  mean  sea 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 


205 


meridian/ 


e/ 

V 

/'  l  \ 

Figure  4.22.4 

Geocentric  cartesian  coordinates 


level  or  geoidal  height  H  have  already  been  mentioned.  The  geocentric  radius  r, 
is  also  shown  in  Figure  4.22.4.  These  heights  are  associated  with  the  geodetic, 
astronomical,  and  geocentric  systems,  respectively. 

In  addition  to  these  systems  of  latitude,  longitude,  and  height,  it  is  common 
to  express  the  position  of  a  point  on  or  near  the  Earth  in  a  right-handed  geocen- 
tric cartesian  coordinate  system  (Figure  4.22.4).  The  coordinates  of  a  point  p  are 
expressed  as  a  triplet  including  X,  Y,  and  Z  coordinates.  Here  the  direction  of  the 
Z-axis  is  that  of  the  rotational  reference  ellipsoid,  and  the  X-axis  is  perpendicular 
to  that  through  the  reference  meridian.  The  K-axis  is  of  course  perpendicular  to 
the  X-  and  F-axes  in  a  right-handed  sense.  As  with  the  other  systems,  the  origin  is 
(ideally)  the  center  of  the  Earth.  Conversion  from  geocentric  to  geocentric  cartesian 
coordinates  is  given  by 


X 
Y 
Z 


J  p 


cos  4>'  cos  A 
cos  4>'  sin  A 
sin  <f>' 


(4.22-6) 


206  EXPLANATORY  SUPPLEMENT 

Conversion  from  geodetic  to  geocentric  cartesian  coordinates  is  given  by 


X 
Y 

Z 


(N$  +  h)  cos  4>  cos  A 
(N^  +  h)  cos  (j>  sin  A 
((1  -  e2)A^  +  h)  sin  cf> 


(4.22-7) 


where  e  is  the  eccentricity  of  the  ellipsoid 


\/o2  -  b2  ,  

 =  V2f-f,  (4. 

and  Nj,  is  the  ellipsoidal  radius  of  curvature  in  the  meridian,  and  is  given  by 

V  1  —  e1  sin2  4> 

Conversion  from  geocentric  cartesian  to  geocentric  coordinates  is  given  by 


"  4>'  ' 

A 

r 

p 

tan 


- 1 


tan 


-i  1 
z 


(4.22-10) 


s/x2  +  y2+z2 


Note  that  =  sin  1  Z  may  also  be  used  to  determine  <j>' ,  and  that  these  functions 
are  evaluated  such  that  -90°  <  <j>  (or  <p')  <  +90°,  and  0°  <  A  <  360°. 

Conversion  from  geocentric  cartesian  to  geodetic  coordinates  is  not  as  simple 
a  matter,  however.  This  problem  has  long  been  an  interesting  one  for  geodesy. 
However,  Borkowski  (1989)  has  recently  reviewed  the  various  techniques  used  to 
solve  this  problem,  and  has  proposed  two  solutions,  one  of  which  is  exact  and  is 
reproduced  here.  It  is  based  on  using  an  expression  for  the  reduced  latitude  in  a 
solvable  fourth-degree  polynomial. 

Several  intermediate  values  are  computed  in  order  to  perform  a  solution: 


r  =  s/x2  +  Y2, 

(4.22-11) 

£_  [bZ-(a2- 
ar 

-b1)] 

(4.22-12) 

f_  [bZ+ia2- 
ar 

b2)] 

J 

(4.22-13) 

P  =  -(£F+1), 

(4.22-14) 

Q  =  2{E2  -  F2), 

(4.22-15) 

D  =  P3  +  Q2, 

(4.22-16) 

4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 

1 


G  = 


t  = 


y/E2  +  v  +  E 


G2  + 


F-vG 


2G-E 


207 

(4.22-17) 
(4.22-18) 

(4.22-19) 


Finally,  the  latitude  and  ellipsoidal  height  are  computed  from: 

1  -f2" 


0  ■  arctan 


2bt  J 

h  =  (r  -  at)  cos  4>  +  (z-b)  sin  <f>. 


(4.22-20) 
(4.22-21) 


If  D  <  0,  e.g.,  if  less  than  about  45km  from  the  Earth's  center,  the  following 
equation  should  be  used  for  v  in  order  to  avoid  the  use  of  complex  numbers: 


v  =  2\ 


4  -  arccos 


Q 


(-py 


(4.22-22) 


To  obtain  the  proper  sign  (and  solution  of  the  fourth-degree  polynomial  since  up 
to  four  solutions  actually  exist),  the  sign  of  b  should  be  set  to  that  of  z  before 
beginning.  Borkowski  also  notes  that,  of  course,  this  solution  is  singular  for  points 
at  the  z-axis  (r  =  0)  or  on  the  X7-plane  (Z  =  0).  Additionally  for  points  close  to 
those  conditions,  some  roundoff  error  may  be  avoided  and  the  accuracy  improved 
slightly  by  replacing  the  value  of  v  with 


v3  +  2Q 
3P 


Finally, 


A  =  arctan 


(4.22-23) 


(4.22-24) 


4.23   Local  Coordinate  Systems 

Many  possibilities  exist  for  establishing  local  coordinate  systems,  either  systems 
designed  for  a  specific  observer  or  systems  designed  to  cover  a  given  local  area.  Most 
systems  specific  to  an  observer  are  horizon  (or  altitude  and  azimuth)  coordinate 
systems  and  a  "standard"  one  is  described  below.  Coordinate  systems  designed  to 
cover  a  localized  area  are  usually  based  on  a  "map  projection"  coordinate  system, 
such  that  the  coordinates  of  a  point  relative  to  the  reference  ellipsoid  are  projected 
onto  a  plane  upon  which  computations  can  be  done  with  relative  simplicity  (as 
opposed  to  working  on  the  ellipsoid  itself).  Some  examples  of  the  more  commonly 


208 


EXPLANATORY  SUPPLEMENT 


used  of  these  types  of  systems  are  given,  such  as  for  Universal  Transverse  Mercator 
coordinates  and  (in  the  U.S.)  state  plane  coordinates. 

4.231  Horizon  System  Depending  on  the  author,  slight  variations  exist  in  the  def- 
inition of  any  local  horizon  coordinate  system.  However,  a  more  or  less  "standard" 
system  is  described  as  follows. 

First,  any  such  system  must  have  at  least  two  reference  planes.  The  primary 
reference  plane  here  is  the  local  horizon,  and  the  secondary  is  the  local  meridian 
(see  Figure  4.231.1).  The  horizon  is  the  plane  perpendicular  to  the  observer's  local 
vertical,  while  the  meridian  is  the  plane  perpendicular  to  the  horizon  that  passes 
through  the  celestial  poles.  The  direction  of  any  point  p2  (from  the  observer  at 
pi )  in  this  system  is  then  given  by  its  altitude  and  azimuth.  If  we  imagine  a  plane 
passing  through  p\  and  the  zenith  z,  the  angle  between  the  horizon  and  the  point 
p2  in  this  plane  is  the  altitude  (also  sometimes  known  as  the  elevation  angle)  a, 
and  the  angle  between  the  meridian  and  this  plane  measured  clockwise  from  north, 
as  viewed  from  above,  is  the  azimuth  A.  (Some  users  in  the  past,  particularly  for 
geodetic  purposes,  have  defined  azimuth  as  being  measured  clockwise  from  south. 
This  practice  is  no  longer  much  in  use  but  users  of  old  observations  should  be  aware 
of  it.)  The  altitude  will  have  an  angular  value  of  from  —90°  to  +90°  (negative  if 


Figure  4.231.1 
Altitude  and  azimuth 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  209 

the  object  is  below  the  horizon  and  positive  if  above),  and  the  azimuth  will  have 
an  angular  value  of  from  0°  to  360°.  Instead  of  this  spherical  coordinate  system, 
a  left  handed  three-dimensional  cartesian  coordinate  system  is  also  used,  with  the 
z-axis  positive  up,  the  x-axis  positive  north,  and  the  y-axis  positive  east  (through 
90°  azimuth). 

A  further  variation  of  this  system  is  to  use  the  zenith  distance  z  instead  of 
the  altitude.  The  zenith  distance  is  simply  the  complement  of  the  altitude,  i.e., 
the  angular  distance  of  p2  from  the  zenith  z-  It  has  the  advantage  of  always  being 
positive,  with  angular  values  of  from  0°  to  180°.  It  is  computed  from  altitude  as 

z  =  90°-a,  (4.231-1) 

where  the  z  and  a  are  in  degrees. 

4.232  Grid  Coordinate  Systems  For  computational  convenience,  it  is  common  to 
represent  sections  of  the  curved  surface  of  the  Earth  with  a  plane.  Various  systems 
have  been  devised  to  do  this,  all  based  on  given  transformation  equations  from  the 
sphere  or  ellipsoid  to  the  plane.  These  transformations  are,  in  fact,  map  projections, 
in  many  cases  the  same  as  those  used  for  mapping  even  large  segments  of,  or  all  of 
the  Earth.  Conformal  projections  are  usually  used  so  that  directions  on  the  surface 
being  mapped  are  preserved  on  the  grid.  The  coordinate  systems  based  on  such 
map  projections  are  usually  termed  grid  coordinate  systems.  The  most  widely  used 
are  the  Universal  Transverse  Mercator,  and  the  state  plane  coordinate  systems  of 
the  United  States.  Obviously  many  other  systems  exist  for  various  countries  and 
areas,  but  the  basic  principles  (and  many  times  the  projection  formulas,  with  the 
exception  of  constants)  are  the  same. 

For  any  grid  coordinate  system,  several  fundamental  transformations  and  quan- 
tities are  of  importance.  The  fundamental  transformations  are  the  direct  conversion 
from  geodetic  coordinates  {<p,  A)  to  grid  coordinates  {X,  30,  and  the  inverse  transfor- 
mation from  grid  coordinates  to  geodetic  coordinates.  Other  quantities  of  interest 
include:  (a)  the  convergence  of  the  meridians,  i.e.,  the  angle  between  grid  north 
and  true  north  on  the  grid  (7);  (b)  the  angle  on  the  grid  between  the  geodesic  (the 
shortest  distance  between  two  points  on  the  ellipsoid)  and  the  straight  line  between 
them  (known  in  some  of  the  references  as  "r-T");  (c)  the  scale  at  a  given  point  (k); 
and  (d)  the  scale  factor  along  a  line.  Equations  for  the  transformations  and  scale 
are  given  below  (based  on  Snyder  (1983));  equations  for  the  other  quantities  are 
available  from  the  other  references,  particularly  Thomas  (1952). 

Fundamental  quantities  and  expressions  used  are  summarized  as  follows: 

<p  =  geodetic  latitude  of  point; 
A  =  geodetic  longitude  of  point; 
<t>'  =  foot  point  latitude  (see  definition  below); 


210 


EXPLANATORY  SUPPLEMENT 


A0  =  longitude  of  the  origin  (and  the  central  meridian  for  the  transverse  Mer- 
cator  grid); 

<f>u  <h  =  latitude  of  the  standard  parallels  for  Lambert  conformal  conic  grid; 
AA  =  difference  of  longitude  from  the  central  meridian  (AA  =  A  -  A0)  (in 
radians); 

a  —  semi-major  axis  of  the  ellipsoid; 
h  =  semi-minor  axis  of  the  ellipsoid; 

2  —  b2 

e  =  eccentricity  of  the  ellipsoid  (e2  =  r — ); 


e  - 


3  iP 
12       a         "  > 

second  eccentricity  of  the  ellipsoid  (e  ~  = 


b  ■ 

a(l  -e2) 

=  ellipsoidal  radius  of  curvature  in  the  meridian  (Nj,  -  -  _  ^_  ^  ^3/,  ) . 

Fortran  programs  for  these  transformations  are  available  from  the  U.  S.  Na- 
tional Geodetic  Survey  (NGS,  1985).  For  more  information  write  National  Oceanic 
and  Atmospheric  Administration,  National  Geodetic  Survey  (N/CG174),  Rockville, 
MD  20852. 


4.233  Universal  Transverse  Mercato  rand  Universal  Polar  Stereographic  The  Uni- 
versal Transverse  Mercator  (UTM)  [along  with  the  Universal  Polar  Stereographic 
(UPS)]  coordinate  system  is  a  worldwide  grid  system  of  separate  zones.  It  was  de- 
veloped in  1947  by  the  U.  S.  Army  as  a  worldwide  military  grid  system.  Originally 
designed  to  be  useful  for  artillery  operations,  it  has  since  been  used  commercially 
as  well.  The  UTM  system  consists  of  sixty  6°  wide  zones  of  longitude,  with  zone  1 
going  from  -180°  to  -174°  longitude,  zone  2  from  -174°  to  -168°  longitude,  etc. 
Letter  designations  are  sometimes  applied  to  zones  running  from  south  to  north. 
The  various  zones  are  as  shown  in  Figure  4.233.1.  The  central  meridian  is  the  cen- 
tral meridian  of  each  zone,  with  a  scale  factor  of  kQ  =  0.9996.  This  results  in  a 
maximum  scale  error  of  1/1000  anywhere  in  a  zone,  or  1/2500  for  points  on  the 
central  meridian  or  above  45°  or  below  -45°  latitude.  (Of  course,  as  with  all  grid 
systems,  there  is  no  scale  error  if  the  appropriate  corrections  for  scale  are  made.) 
The  use  of  UTM  is  usually  limited  to  between  +84°  and  -80°  latitude.  Grid  coor- 
dinates are  defined  with  X  =  500000  meters  for  all  points  on  the  central  meridian, 
and  Y  =  0  meters  for  all  points  on  the  equator  when  points  are  being  referenced  in 
the  Northern  Hemisphere,  and  Y  =  10000000  meters  when  points  are  being  refer- 
enced in  the  Southern  Hemisphere.  Although  the  latitude  and  longitude  of  a  point 
referenced  to  any  ellipsoid  may  be  converted  to  UTM  coordinates,  for  certain  areas 
of  the  world,  specific  ellipsoids  are  associated  with  UTM  coordinates.  For  example 
the  specified  ellipsoids  are  Clarke  1866  for  North  America,  Clarke  1880  for  Africa, 
and  the  International  for  most  of  the  rest  of  the  world,  except  for  the  far  east  and 
Australia.  [See  Dept.  of  the  Army  (1973,  plate  1)  for  these  ellipsoid  designations. 
Section  4.24  explains  the  subject  of  ellipsoids  in  more  detail.] 


212  EXPLANATORY  SUPPLEMENT 

The  Universal  Polar  Stereographic  Grid  System  (UPS)  consists  of  two  polar 
stereographic  projections,  one  for  the  north  polar  area  and  one  for  the  sooth  polar 
area.  The  north  zone  covers  all  areas  north  of  84°  latitude,  and  the  south  zone  all 
areas  south  of  -80°  latitude.  The  scale  factor  at  the  origin  (the  poles)  is  k0  -  0.  994. 
In  both  zones,  a  2000000  meter  ^-coordinate  line  coincides  with  the  0°  and  180° 
meridians.  The  pole  will  have  coordinates  pfX-  2000000  meters,  and  Y  =  2000000 
meters.  The  international  ellipsoid  (a  =  6378388  meters,  f  =  11  297)  is  associated 
with  UPS  coordinates.  Because  of  the  areas  it  covers,  the  UPS  is  little  used.  [For 
more  information  see  Dept.  of  the  Army  (1958).] 

Although  UTM  and  UPS  were  originally  developed  for  use  with  tables  and 
graphs,  with  modern  computers  it  is  easier  to  use  the  actual  transformation  equa- 
tions. The  transformation  procedures  are  given  below  [from  Snyder  (1983,  pp.  67- 
69,  160-164)];  both  UTM  and  UPS  are  also  discussed  in  Parker  and  Bartholomew 
(1989). 

For  UTM,  starting  with  our  previously  given  expressions,  we  continue  by  com- 
puting 5^,  the  length  of  the  meridional  arc,  the  true  meridional  distance  on  the 
ellipsoid  from  the  equator  to  latitude  0: 


=  a[{\  -  e2  1 4  -  3e4  /  64  -  5e6  1256  - -)4> 

-  Qe2 !  8  +  3e4  /  32  +  45<?6  /  1 024  +  ■  •  •)  sin  20 
+  (15e4  /  256  +  45/  / 1024  +  •■■)  sin  40 

-  (35e6  /  3072  +  -)  sin  60  +  -],  (4.233-1) 
where  0  is  in  radians.  Also  needed  are  other  auxiliary  quantities: 

T  =  tan2  0,  (4.233-2) 
C  =  e'2  cos2  0,  (4.233-3) 
A  =  cos  0(AA).  (4.233^1) 

We  also  compute  as  given  by  S  computed  at  the  latitude  0O  at  the  origin  of  the 
X  and  Y  coordinates.  Then  the  direct  transformation  from  (0,  A)  to  (X,  Y)  is  given 

by 


X  =  koN^A  +  (1  -  T+QA3 1 6 

+  (5  -  1 8  T  +  T2  +  72C  -  58e'2)A5  1 1 20],  (4.233-5) 
Y  =  koiSt  -  %,  +  JV0  tan  0[A2  /  2  +  (5  -  T  +  9C  +  4C2)A4  I  24 

+  (61  -  58  7>r2+600C-330£?'2)A6/720]}.  (4.233-6) 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 

The  scale  factor  at  any  given  point  is  given  by 


213 


k  =  h 


1  +  (1  +  Qy  +  (5  -  4  T  +  42C  +  1 3C2  -  28e'2)^ 


+  (61  -  148  7+  16  T2) 


720 


(4.233-7) 


The  inverse  formulas,  for  converting  (X,  Y)  to  (0,  A)  are 


p  0!  -  {Nfr  tan  0,  /  ff  ,)[£>2 12  -  (5  +  3  Tt  +  10d  -  4C2  -  9ea)D4  1 24 

+  (61  +  90  Ti  +  298C,  +  45  T2  -  252e'2  -  3C2)D6  /  720],  (4.233-8) 


A  =  Aq +  [£>-(!  +  2T\  +  Cl)D3/6 


+  (5  -  2C,  +  28  Ti  -  3C]  +  8e'2  +  24  T2)D5 1 120]  /  cos  0, , 


(4.233-9) 


where  0j  is  the  foot-point  latitude  or  the  latitude  at  the  central  meridian  which  has 
the  same  Y  coordinate  as  that  of  the  point  (0,  A).  It  is  given  by 

0,  ^M  +  (3e1/2-27e:J/32  +  -)sin2Ai  +  (21e2/  16-55e4/32-  --)sm4A* 


+  (151ef  /96+  -)sin6/x  +  ■ 


(4.233-10) 


where 


i  -  vT^2 


1  +VTre2 


#  =  S![a{\  -  e2  1 4  -  3e4  /  64  -  5e6  I  256  -  •■■)], 
S  =  S4>n  +  Y/k0. 


(4.233-11) 

(4.233-12) 
(4.233-13) 


For  the  other  terms,  in  addition  to  needing  C,  T,  and  N$  for  the  footpoint  latitude 
01  we  also  have 


Ri  =  a(l  -e2)/(l  -  e2  sin2  0O3'2, 
D  =  X/(N^kn). 

For  UPS  coordinates,  the  direct  equations  are 


(4.233-14) 
(4.233-15) 


X  -  2000000  +  p  sin  A, 
ynorth  =  2000000  -  pcosA, 
ySOmh  =  2000000  +  pcos  A. 


(4.233-16) 
(4.233-17) 
(4.233-18) 


214  EXPLANATORY  SUPPLEMENT 

The  first  Y  is  for  the  north  zone,  the  second  for  the  south  zone.  The  auxiliary 
quantities  are  obtained  from 


^(1  +e),+e(l  -  e)'-e* 


f  =  tan 


We  also  have  for  the  scale 


where 


7T  (j) 

4~2 


k  = 


1  —  e  sin  <f> 
1  +  e  sin  4> 


en 


am 


cos  4> 


in  —         .  ■  ■  . 

sj  1  —  e1  sin2  4> 
The  inverse  solution  for  cf>  and  A  is  given  by 


<b=  arctan  I  t 

2 


I  —  e  sin  i 


L  +  e  sin  4> 


A  -  arctan 


-Y 


(4.233-19) 
(4.233-20) 

(4.233-21) 

(4.233-22) 


(4.233-23) 
(4.233-24) 


4.234  State  Plane  Coordinates  In  the  United  States,  a  state  plane  coordinate  sys- 
tem has  been  established  so  that  each  state  has  its  own  grid  coordinate  system. 
These  systems  were  originally  designed  by  the  U.S.  Geological  Survey  in  the  1930s 
and  1940s,  and  have  since  been  legally  adopted  by  the  state  legislatures  of  most 
states.  For  each  state,  they  consist  of  one  or  more  zones  of  transverse  Mercator  for 
states  or  areas  of  states  with  a  mostly  north-south  extent  or  Lambert  conformal 
conic  projections  for  states  or  areas  with  mostly  east-west  extent  (and  one  oblique 
transverse  Mercator  projection  for  part  of  Alaska).  There  are  136  separate  zones 
covering  all  of  the  50  states  (the  U.S.  Virgin  Islands,  American  Samoa,  etc.,  all 
also  have  their  own  projections,  some  of  which  are  not  conformal).  Snyder  (1983, 
pp.  58-62,  Table  8)  lists  all  the  zones,  by  projection  and  state,  with  the  central 
meridian,  its  scale  error  for  the  Lambert  conformal  conic  zones,  and  the  standard 
parallels  and  origin  for  the  transverse  Mercator  zones.  The  coordinates  of  the  ori- 
gins are  also  given  in  a  footnote  to  that  table.  Note  that  survey  feet  (where  1  m  = 
39.37  in.)  are  used  rather  than  standard  U.S.  feet  (where  2.54cm  =  1  in.).  These 
systems  were  established  under  the  assumption  that  any  calculations  done  assum- 
ing plane  coordinates  would  not  have  errors  worse  than  1  in  10000.  Their  definition 
in  many  states  is  also  legally  tied  to  the  North  American  Datum  of  1927  (see  the 
next  section),  and  land  parcels  may  be  defined  or  even  must  be  defined  in  terms  of 
state  plane  coordinates.  It  seems  likely  that  the  use  of  state  plane  coordinates  may 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 


215 


fall  off  in  the  future  since:  (a)  a  1  in  10000  error  in  surveying  urbanized  areas  is 
noW  becoming  unacceptable,  and  (b)  the  NAD1927  has  been  replaced  for  most  pur- 
noses  by  the  North  American  Datum  of  1983,  and  the  state  plane  systems  will  now 
need  to  be  updated-a  difficult  procedure  since  it  involves  changing  laws  in  several 
states  However,  many  governmental  and  commercial  organizations  currently  use 
state  plane  coordinates  heavily.  [For  more  information  on  state  plane  coordinates 
and  projections,  see  Mitchell  and  Simmons  (1945)  and  Snyder  (1983,  pp.  56-63). 
General  surveying  texts,  such  as  Moffit  and  Bouchard  (1975),  also  contain  informa- 
tion on  state  plane  coordinates.] 

The  equations  for  the  transverse  Mercator  projection  are  already  given  under 
the  description  for  UTM  above.  The  only  changes  will  be  for  constants  such  as  the 
central  meridian  (A0),  the  scale  factor  on  the  central  meridian  (k0),  and  the  gnd 

coordinates  of  the  origin. 

The  equations  for  the  Lambert  conformal  conic  projection  are  taken  from  Sny- 
der (1983,  p.  107-109).  The  direct  equations  are 


X  =  psinfl, 
Y-  p0  -  pcos0, 
k  , 


am 


(4.234-1) 
(4.234-2) 
(4.234-3) 


where 


P  = 


Pa  = 


aFt", 

n(\  —  Ao), 


oF<g, 
In  m\ 


lnm2 


ln?i  -  Inf2 

COS  (j) 

n=  (1  -^sin2^)"2' 

?  =  tanU-2j 
mi 


sin 
sin  0) 


en  • 


< 


(4.234-4) 
(4.234-5) 
(4.234-6) 
(4.234-7) 

(4.234-8) 
(4.234-9) 

(4.234-10) 


with  the  same  subscripts  1,  2,  or  none  applied  to  m  and  4>  in  the  equation  for 
the  subscripts  0,  1,  2,  or  none  applied  to  /  and  *  in  the  equation  for  t.  n,  F,  and  po 
need  be  computed  only  once  per  zone.  Note  that  published  (in  some  cases  officaily 
adopted)  tables  may  give  (negligible)  differences,  as  the  tables  were  computed  Witl 
simpler,  less-precise  formulas  (Snyder,  1983,  p.  108). 


216 

The  inverse  formulas  are 


EXPLANATORY  SUPPLEMENT 


7T 

2 


2  arctan 


1  —  esin  <j>) 
1  +  esin  0) 


tti 


where 


'  =  (^)"n, 
aF 


p = ±  s/x1  -  (po  -  m 


A  =  -  +  A0, 
n 

9  =  arctan  ■ 


Po-Y 


(4.234-11) 

(4.234-12) 

(4.234-13) 
(4.234-14) 

(4.234-15) 


The  sign  of  p  is  taken  from  n.  If  n  is  negative,  the  signs  of  X,  Y,  and  po  in  the 
equation  for  6  must  be  reversed,  and  the  quadrant  of  Q  determined  accordingly. 
Also  note  that  the  equation  for  cf>  requires  iteration  on  0,  and  will  converge  rapidly 
with  the  initial  assumption 


<t>  = 


2  arctan  t. 


(4.234-16) 


4.235  Other  Grid  Systems  Obviously,  the  equations  that  have  been  given  above 
for  the  Transverse  Mercator,  Polar  Stereographic,  and  Lambert  Conformal  Conic 
projections  can  be  used  with  many  other  grid  systems  with  just  a  change  of  the 
appropriate  constants. 


4.24   Geodetic  Datums  and  Reference  Systems 

A  geodetic  datum  or  reference  system  provides  a  framework  to  which  the  coordi- 
nates of  any  point  may  be  referenced.  A  geodetic  datum  has  a  very  specific  definition 
in  terms  of  classical  geodesy;  however,  some  recent  "datums"  and  most  terrestrial 
reference  systems  do  not  fall  strictly  under  this  definition. 

A  geodetic  datum  may  also  be  either  a  horizontal  or  vertical  datum,  differenti- 
ating whether  the  datum  is  to  serve  primarily  for  determining  (horizontal)  location 
on  or  near  the  surface  of  the  Earth,  or  for  determining  height  (actually  gravity 
potential)  of  a  given  point.  In  the  discussion  that  follows,  it  is  a  horizontal  datum 
that  is  being  referred  to. 

In  this  section,  we  briefly  describe  how  these  ellipsoids,  datums,  geodetic  ref- 
erence systems,  and  terrestrial  reference  systems  are  created,  and  then  list  many 
of  the  ones  in  use.  Information  on  how  transformations  may  be  performed  between 
these  various  datums  and  reference  systems  is  also  provided.  Finally,  a  short  expla- 
nation is  given  of  how  to  reduce  common  geodetic  and  astronomical  observations 
to  the  reference  ellipsoid. 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  217 

4.241    Datums,  Geodetic  Reference  Systems,  and  Terrestrial  Reference  Systems  A 

geodetic  datum  is  a  coordinate  system  defined  relative  to  a  reference  ellipsoid  (as 
defined  in  Section  4.21)  and  an  initial  point  (or  origin)  near  the  surface  of  the  ellip- 
soid. Therefore  the  following  are  needed:  (a)  the  size  and  shape  of  the  (rotational) 
ellipsoid  (e.g.,  a,  1  //);  (b)  the  astronomical  coordinates  of  the  initial  point  of  the 
ellipsoid  ($,A),  and  an  azimuth  (a)  determined  from  that  point;  (c)  deflections 
of  the  vertical  and  a  geoid  undulation  at  the  initial  point.  Obviously  an  infinite 
number  of  choices  are  possible  for  the  above  parameters,  but  several  methods  are 
usually  applied  in  order  to  provide  the  most  useful  possible  reference  system.  As 
previously  described,  the  ellipsoid  is  chosen  so  as  to  represent  the  geoid  as  well  as 
possible  over  the  desired  area  (e.g.,  a  country)  or  the  entire  Earth.  For  a  local  da- 
tum, the  deflections  and  undulation  are  sometimes  chosen  for  simplicity  to  be  zero 
at  the  initial  point — but  more  usefully  over  larger  areas  or  for  a  terrestrial  datum, 
these  values  are  chosen  so  that  the  rotational  axis  of  the  ellipsoid  will  be  parallel 
to  or  identical  with  that  of  some  reference  rotational  axis  of  the  Earth  (and  if  the 
deflection  components  are  absolute,  then  the  datum  is  also  geocentric). 

As  an  historical  note,  it  should  be  added  that  classical  reference  ellipsoids  and 
geodetic  datums  were  usually  established  in  support  of  the  surveying  of  great  hor- 
izontal geodetic  networks,  using  triangulation  networks  over  large  areas  as  well  as 
auxiliary  baseline,  astronomical,  and  gravity  measurements.  The  data  from  these 
surveys  could  be  adjusted  mathematically  in  order  to  specify  the  best-fitting  ellip- 
soid to  the  area  being  surveyed,  as  well  as  the  other  desired  parameters  for  a  datum. 
An  initial  point  for  the  datum  was  usually  chosen  near  the  center  of  the  network 
in  order  to  minimize  the  errors  in  measurements  relative  to  the  initial  point  as  one 
moved  outward  in  the  network. 

However,  the  space  age  and  its  introduction  of  artificial  satellites  greatly  changed 
the  methods  of  datum  determination.  Now  the  absolute  positions  relative  to  the 
center  of  the  Earth  could  be  determined  for  various  points  in  the  geodetic  network 
(the  techniques  used  for  this  are  described  in  Section  4.4).  These  position  determi- 
nations could  be  combined  with  the  conventional  surveying  observations  in  order 
to  obtain  much  more  precise  datums  for  much  larger  areas.  Further,  coordinate 
systems  (usually  with  sets  of  station  coordinates)  can  be  determined  without  refer- 
ence to  any  ground-based  surveying  observations  or  even  to  an  ellipsoid  (although 
an  ellipsoid  is  often  used  to  express  station  coordinates  in  the  more  conventional 
geodetic  latitude  and  longitude  instead  of  geocentric  cartesian  coordinates).  The 
orientation  and  scale  of  these  space-based  systems  is  usually  obtained  from  some 
combination  of  holding  the  coordinates  of  one  or  more  stations  fixed,  and  using  or 
determining  an  Earth  rotation  series  that  fixes  the  changes  in  the  system  over  time 
due  to  the  Earth's  rotation.  In  practice  these  assumptions  are  made  so  that  the 
new  system  will  have  the  same  orientation  and  scale  as  some  previous  "standard" 
system,  such  as  the  BIH  or  IERS  systems  (described  below).  The  center  of  the 
Earth  is  determined  dynamically  by  the  satellite  observations. 


218  EXPLANATORY  SUPPLEMENT 

One  of  the  first  consequences  of  the  availability  of  the  new  techniques  was 
the  establishment  of  geodetic  reference  systems  that  have  much  in  common  with 
a  geodetic  datum  but  have  slight  differences  in  their  definition.  Such  a  reference 
system  does  not  rely  on  the  definition  of  an  initial  point.  The  orientation  of  such 
a  system  is  assumed  to  be  "perfect,"  i.e.,  with  rotational  axis,  reference  meridian, 
and  center,  being  that  of  the  Earth.  The  reference  ellipsoid  in  this  case  is  always 
a  terrestrial  reference  ellipsoid,  and  the  best  possible  representation  of  the  mean 
Earth  ellipsoid,  or  that  ellipsoid  that  best  approximates  the  geoid.  To  accomplish 
the  latter,  the  gravity  potential  at  the  surface  of  the  ellipsoid  is  specified  (or  al- 
ternatively, J2,  the  dynamical  form  factor  of  the  Earth)  as  well  as  the  rotational 
velocity  of  the  Earth.  The  constants  and  parameters  of  such  a  system  are  of  course 
always  undergoing  refinement,  but  the  specification  of  such  systems  allows  for  their 
use  in  referencing  geodetic  observations. 

A  final  refinement  beyond  a  geodetic  reference  system  is  a  terrestrial  reference 
system.,  using  a  reference  frame  consisting  of  a  set  of  cartesian  station  coordinates 
and  their  velocities  to  provide  the  underlying  definition  rather  than  a  reference 
ellipsoid.  Many  other  parameters  and  even  methods  of  data  reduction  ( "Standards" } 
are  also  given  as  part  of  the  reference  system — generally  in  order  to  define  how 
observations  will  be  used  in  order  to  define  the  dynamic  connection  between  such  a 
terrestrial  system  and  a  celestial  one.  By  international  agreement,  one  such  system 
is  defined  as  fundamental  and  it  is  the  IERS  Terrestrial  System,  described  further 
in  Section  4.2.5. 

4.242  Specific  Ellipsoids,  Datums,  and  Reference  Systems  Table  4.242.1  lists  var- 
ious ellipsoids  that  have  been  used  as  the  basis  of  geodetic  datums  and  reference 
systems.  Note  that  as  previously  mentioned,  only  a  and  1  /  /  are  necessary  for  the 
definition  of  an  ellipsoid.  Table  4.242.2  lists  geodetic  datums  (also  giving  the  origin 
station  if  any  and  its  latitude  and  longitude)  and  notes  that  are  associated  with  spe- 
cific terrestrial  reference  systems.  Similar,  but  abbreviated  versions  of  these  tables 
are  given  in  the  current  Astronomical  Almanac,  page  K13.  Finally,  Figure  4.242.1 
(after  Rapp,  1980,  p.  82)  shows  on  a  world  map  t  he  coverage  of  the  major  geodetic 
datums. 

4.243  Datum  Conversions  The  subject  of  converting  coordinates  from  one  datum 
to  another  is  a  complex  one,  with  a  very  extensive  literature.  Indeed,  the  problem 
almost  always  arises  and  is  usually  discussed  whenever  a  new  datum  or  reference 
system  is  formed,  since  there  will  usually  be  a  need  to  transform  the  coordinates  of 
points  in  other  systems  to  coordinates  in  the  new  system. 

Two  general  methods  have  been  used  in  the  past  for  datum  transformations. 
The  first  is  a  differential  method,  where  differential  (in  the  partial-derivative  sense) 
equations  are  formed  that  give  the  change  in  station  coordinates  (A0,  AA)  as  a 
function  of  changes  in  datum/ellipsoid  parameters  (such  as  for  changes  in  a,  f, 


Figure  4.242.1 

Major  geodetic  datum  locations 


220 

Table  4.242.1 

Earth  Ellipsoids 


EXPLANATORY  SUPPLEMENT 


bllipsoiu 

Semi-major 

Inverse 

(name  and  year  computed) 

axis  (a)  in 

flattening 

II  It?  It?  15 

V  I  ]} 

Airy  1830 

6377563.396 

299.324964 

Everest  1830 

6377276.345 

300  8017 

Everest  1830  (Boni  alternate) 

6377301.243 

300  8017 

Bessel  1841 

6377397.155 

299.152813 

Clarke  1866 

6378206,4 

294.978698 

Clarke  1880 

6378249.145 

293  465 

Clarke  1880  (modified) 

6378249.145 

293.4663 

Helmert  1906 

6378200 

298.3 

International  1909 

6378388 

297 

Krassovsky 

6378245 

298.3 

Mercury  1960 

6378166 

298.3 

WGS60* 

6378165 

298.3 

IAU  1964 

63781 60 

298.25 

Australian  National  1 965 

6378160 

298.25 

WGS66* 

6378145 

298.25 

Modified  Mercury  1968 

6378150 

298.3 

South  American  1969 

6378160 

298.25 

Geodetic  Reference  System  1 967" 

63781 60 

298  2471 674P7? 

WGS72* 

6378135 

298.26 

lAf^  1  Q7C 

6378140 

298.256 

IAU  1976 

6378140 

298.257 

Geodetic  Reference  System  1 980' 

6378137 

298.257222101 

MERIT  1983* 

6378137 

298.257 

WGS84* 

6378137 

298.257223563 

IERS  1989* 

6378136 

298.257 

*  Ellipsoid  is  defined  or  recommended  as  part  of  a  geodetic  or  terrestrial  reference 
system, 


Sources:  Rapp  (1980,  p.  83),  Astronomical  Almanac  (1 990,  p.  K130),  DMA  (1987, 
part  1,  p.  3-41),  McCarthy  (1989). 


scale,  etc.).  This  type  of  method  has  been  most  useful  in  the  past  where  small 
differences  exist  between  the  two  datums,  or  a  minor  change  in  an  existing  datum 
was  being  made.  However,  the  derivation  of  the  differential  equations  for  a  specific- 
case  and  their  application  and  accuracy  is  a  complicated  subject  and  will  not  be 
discussed  further  here.  [Information  on  this  type  of  method  is  available  in  Rapp 
(1980,  pp.  42-74);  Bomford  (1971,  pp.  199-207);  Heiskanen  and  Moritz  (1967,  pp. 
204-210);  Molodenskii  et  al.  (1962,  pp.  13-17);  Torge  (1980,  pp.  150-152);  DMA 
(1987,  part  1,  pp.  7-1  to  8-8).] 


Table  4.242.2 

Geodetic  Datums 


Datum 

Ellipsoid 

Origin 

I  atitiiHo 

[  nnnttiiHp 

LUI  IUILUUC 



Adindan 

r"\ar\ia  1  Rdf\ 
\j\a'n.G  ItJtJU 

^tatinn  7*., 

OLdLILJI  I  £-  \f 

+22 1 0  07. 1 1 0 

0312921.608 

American  odniud  isot 

Clarke  1866 

Betty  1 3  ECC 

-142008.341 

1891707.750 

Arc- Cape  \ooum  wncd; 

Clarke  1880 

Buffelsfontein 

-335932.000 

0253044.622 

Argentine 

International 

Campo  Inchauspe 

-355817 

297  49  48 

Ascension  Island  1958 

International 

Mean  of  3  stations 

-0757 

34537 

Australian  Geodetic  1966 

Australian  National 

Johnston  Memorial  Calm 

-255654.55 

1331230.08 

Bermuda  1957 

Clarke  1866 

Ft.  George  B  1937 

+322244.360 

2951901.890 

Beme  1 898 

Bess&l 

Berne  Observatory 

+465708  660 

0072622  335 

Betio  Island,  1966 

International 

1 966  Secor  Astro 

+01  21  42. 03 

1725547.90 

Camp  Area  Asiro  i  sro  i  f  uo<jo 

International 

Camp  Area  Astro 

-775052.521 

1664013.753 

p.ntnn  Antrn  19R6 

International 

t966  Canton  Secor  Astro 

-024628.99 

1B8  1643.47 

Cape  Canaveral  {") 

Clarke  1866 

Central 

+282932.364 

2792521.230 

Christmas  Island  Astro  1967 

Intel  national 

Sat.Tri.Sta.  059  RM3 

+020035.91 

2023521.82 

Chua  Astro  (Brazil-Geodetic) 

Internationa! 

Chua 

-194541.16 

3115352.44 

Corrego  Alegra  {Brazil- Mapping) 

International 

Corrego  Alegre 

-195015.  140 

3110217.250 

raCtAr  iclsnd  1  Qfi7  Astro 

International 

Satrig  Rm  No.  1 

-271039.95 

250341681 

Efate  (New  Hebrides) 

International 

Belle  Vue  IGN 

-174417.400 

1682033,250 

European  (Europe  SO) 

International  1924 

Helmertlurm 

+522251.45 

0130358.74 

Qraciosa  Island  (Azores) 

I  nternational 

Sw  Base 

+390354.934 

3315736.118 

Gizo,  Provisional  DOS 

I  nlrrn^linnal 
I  HIV  lallLFI  lal 

GUX  1 

-092705.272 

1595831.752 

Guam 

Clarke  1 866 

Togcha  Lee  No.  7 

+132238.49 

144  4  5  51.56 

Heard  Astro  1969 

International 

Intsatrig  0044  Astro 

-5301  11.68 

0732322.64 

Iben  Astro,  Navy  1947  (Truk) 

flarlro  1  ftfifi 

Iben  Astro 

+072913.05 

151  4944.42 

Indian  1938 

FuAra^t  1RTC1 

Kalianpur 

+240711,26 

0773917.57 

Isla  Socorro  Astro 

riarko  "Iftfifi 

L-lpi  ^t;:  IOvU 

Station  038 

+1843 4493 

2490239.28 

Inhnctnn  Iclanrl 

JUIlllblUII  ICjIqI  IU 

International 

Johnston  Island  1961 

+1644  49.729 

1902904.781 

Kourou  (French  Guiana) 

International 

Point  Fondamental 

-051553  699 

-524809.  149 

Kusaie,  Astro  lytu,  lyco 

International 

Alien  Sodano  Light 

+0521  48.80 

1625803.28 

Luzon  191 1  (Philippines) 

^lanvy  i  odd 

Ba  I  a  n  ca  n 

+133341.000 

1215203.000 

Midway  Astro  1961 

1  nternational 

Midway  Astro  1961 

+28 1 1  34. 50 

1623624.28 

New  Zealand  1949 

International 

Papalahi 

-41  1908.900 

1750251.000 

North  American  1927 

\_>ldl  Kfc    I  ODD 

Meades  Ranch 

+39 1326. 686 

26127  29.494 

North  American  1983 

rspi  Rn 

una  du 

Old  Bavarian 

Bessel 

Munich 

+480820.  000 

0113426.483 

Old  Hawaiian 

/->  —  r|,Q  -H  QfiC 

i^jarKe  iodd 

Oahu  West  Base 

+21  1813.  B9 

2020904.21 

OrHiisfir-P*  ^uruau  f~i  R  1Q1R 

\J  1  \Jl         ILL-  OUIVLV  VJ.L>      \  O  0*J 

Airy  1830 

Herstmonceux 

+5051  55.271 

0002045.882 

OSGB  1970  (SN) 

Airy 

Herstmonceux 

+5051  55.  271 

0002045.882 

Palmer  Astro  1969  (Antarctica) 

International 

ISTS  050 

-644635.71 

2955639.53 

Pico  de  las  Nieves  (Canaries) 

international  1 3tn 

Pico  de  las  Nieves 

+275741.273 

3442549.476 

Pitcairn  Island  Astro 

Into  mat  ions  I 

Dili-aim  Aclrn  1  QfiT 

—250406.  97 

2295312.17 

Potsdam 

Helmertlurm 

+522253.954 

0130401  153 

Provisional  S,  Amer  can  1966 

International 

La  Canoa 

+0834  17. 17 

2960825.  12 

Provisional  S.  Chile  1963 

International 

l-4ifn  Will 

n  no  a  v  1 1 1 

—535707.  76 

2912328.76 

Pulkovo  1 942 

KrassovsKi  iy4^ 

+5946  18. 55 

030  1942.09 

Qomoq  (Green la nti) 

International 

No.  7008 

South  American  1969 

South  American  1969 

Chua 

-194541  653 

31 1  5355.  936 

ftm  ithd-Sft  Irh-H  /kiik-.i-t\ 

ouumeasi  isiano  (ivianej 

r^ifsrko  mnn 
L<iarKe  i  ddu 

-04  4039.460 

0553200. 166 

Smith      cm f n t !i  Aelr^i 

Inte  mational 

ISTS  061  Astro  Point  1968 

-54  1638.93 

3233043.97 

Swallow  Islands  (Solomons) 

International 

-101821  42 

1661756.79 

Tananarive 

International 

Tananarive  Observatory 

-185502.  10 

04733  06  75 

Bessel  1941 

Tokyo  Observatory  (old) 

+3539  17.51 

13944  40.  50 

Tristan  Astro  1968 

International 

Intsatrig  069  RM  No.  2 

-370326.79 

3474053.21 

VitiLevu  1916  (Fiji) 

Clarke  1880 

Mfinavatu  (latitude  only) 

—  1753<?o.  £od 

Wake  Island,  Astronomic  1952 

Suva  {longitude  only} 

1782535.835 

International 

Astro  1 952 

+191719.991 

1663846.294 

White  Sands  (*) 

Clarke  1866 

Kent  1909 

+323027.079 

2533101.306 

Yof  Astro  1967  (Dakar) 

Clarke  1830 

Yot  Astro  1967 

+144441.  62 

3423052.98 

*  Local  datums  of  special  purpose,  based  on  NAD  1 927  values  for  1he  origin  stations. 
Sources:  Rapp  (1980),  Mueller  eta/.  (1973.  p.  11),  Astronomical  Almanac  (1990,  p.  K13). 


222  EXPLANATORY  SUPPLEMENT 

A  second  method  is  to  do  a  rigorous  transformation  between  the  systems  of 
each  datum.  This  is  often  required  if  high  accuracy  is  desired,  or  there  are  several 
or  large  differences  between  the  datums.  For  any  pair  of  datums,  transformation 
parameters  may  have  already  been  determined,  at  least  for  offsets  and  sometimes 
for  rotation  and  scale.  A  three-step  procedure  is  required  to  convert  (0,  A,  h)  from 
system  1  to  system  2 


W,A,A)i  =>(X,y,Z)i, 
(X,  Y,Z)i=>(X,Y,Z)2, 
(X,Y,Z)2  =*(<{>,  \,h)2. 


(4.243-1) 
(4.243-2) 
(4.243-3) 


The  first  two  transformations  are  already  described  in  Section  4.22.  The  equation 
for  the  third  transformation  is 


X 
Y 
Z 


X  ' 

"  r,  " 

"  D 

-R3 

R2  - 

'  X  ' 

Y 

D 

Y 

Z 

l 

.  T3  j 

.  -R2 

R} 

D 

.  z  . 

(4.243^) 


where  T\ ,  T2,  and  T}  are  the  components  of  a  translation  vector;  R\ ,  R2,  and  #3  are 
the  rotation  angles  (using  small-angle  formulas  here);  and  D  is  the  excess  1  scale 
factor  (BIH,  1988,  p.  A-4).  Various  forms  of  this  seven-parameter  transformation 
exist  under  various  names  (some  not  as  rigorous  as  others).  (See  Kumar,  1972; 
Rapp,  1980,  p.  48;  DMA,  1987,  part  1,  pp.  7-6,  7-12  to  7-14.)  It  is  also  possible  that 
some  of  the  parameters  may  not  be  known  or  can  be  assumed  to  be  zero.  In  modern 
reference  systems,  D  is  usually  close  to  zero,  as  is  T\  and  T2,  and  the  rotations  are 
quite  small. 

In  some  cases,  the  transformation  parameters  are  not  well-determined  or  not 
known  at  all.  The  user  must  then  determine  the  parameters  directly  from  observa- 
tions that  tie  stations  together  between  the  two  systems.  If  enough  points  have  their 
coordinates  determined  in  both  systems,  Equation  4.243-4  or  similar  equations  can 
be  solved  (usually  in  a  least-squares  solution)  for  the  transformation  parameters. 
Of  course,  this  may  not  take  into  account  any  deformations  of  either  of  the  datums 
from  their  idealized  reference  systems  (due  to  surveying  errors).  Any  deformations 
will  be  absorbed  into  the  transformation  parameters  when  they  are  solved  for. 

Of  course,  nowadays  an  alternative  exists  to  doing  transformations  at  all.  One 
could  just  measure  the  coordinates  of  all  the  desired  points  with  a  satellite  receiver— 
thus  determining  the  coordinates  of  the  points  in  some  current  reference  system, 
bypassing  any  transformations  entirely.  This  eliminates  the  need  to  use  the  old 
datums  or  old  observations.  The  coordinates  can  be  measured  in  an  absolute  sense, 
relative  to  the  center  of  the  Earth  at  the  1-  to  5-meter  accuracy  level,  or  relative  to 
other  points  nearby  (within  tens  of  kilometers  say)  to  the  few-cm  level.  The  satellites 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  223 

usually  observed  for  this  purpose  are  those  of  the  Navy  Navigation  Satellite  System 
(NNSS)  or  Global  Positioning  System  (GPS).  More  information  on  these  systems 
is  given  in  Section  4.4. 

4  244  Reduction  of  Observations  to  the  Ellipsoid  In  many  cases  where  astronomi- 
cal or  geodetic  observations  are  made,  it  is  desirable  to  "reduce"  the  observations  so 
that  they  would  correspond  to  such  observations  made  on  the  ellipsoid  itself,  using 
the  ellipsoidal  normal  as  the  local  vertical.  This  is  usually  for  when  one  is  referring 
observations  to  or  densifying  a  current  network,  or  for  that  matter  creating  a  new 
network  itself. 

Various  formulas  of  various  accuracies  exist  for  this  type  of  reduction,  depending 
on  the  type  of  observation  involved  (chord  or  arc  distances,  azimuths,  angles,  etc.) 
and  the  accuracy  desired.  Any  good  surveying  text  will  contain  various  versions  of 
these  formulas.  (Also  see  Bomford,  1971,  pp.  45,  89-91,  120-122;  Heiskanen  and 
Moritz,  1967,  pp.  184-197.) 

4.25  The  Conventional  Terrestrial  Reference  System 

The  Conventional  Terrestrial  Reference  System  is  currently  defined  as  part  of  the 
IERS  Reference  System.  The  IERS  Reference  System  itself  consists  of  the  IERS 
Reference  Frames  and  the  IERS  Standards. 

The  IERS  Reference  Frames  include  both  a  terrestrial  and  a  celestial  one,  with 
the  terrestrial  frame  (ITRF)  being  defined  with  the  following  characteristics:  The 
origin,  the  reference  directions,  and  the  scale  of  the  ITRF  are  implicitly  defined  by 
the  cartesian  coordinates  and  velocities  adopted  for  various  "primary"  observing 
stations  of  the  IERS.  If  geodetic  coordinates  are  needed,  the  GRS  80  ellipsoid  is 
recommended  for  use  in  the  conversion  (a  =  6378137  m,  1  //  =  298.257222101). 
The  origin  of  the  ITRF  is  located  at  the  center  of  mass  of  the  Earth  with  an 
uncertainty  of  less  than  ±  10cm  (as  determined  by  laser-ranging  observations). 
The  standard  unit  of  length  is  the  SI  meter.  The  IERS  Reference  Pole  (IRP)  and 
Reference  Meridian  are  consistent  with  the  corresponding  directions  in  the  BIH 
Terrestrial  System  (BTS)  within  ±  0.005".  The  BIH  reference  pole  was  adjusted 
to  the  Conventional  International  Origin  (CIO)  in  1967.  It  was  then  kept  stable 
independently  until  1987.  Recent  re-reduction  of  the  available  data  has  shown  (BIH, 
1988,  p.  A-3)  that  the  tie  of  the  BTS  (and  therefore  the  IRP)  with  the  CIO  is 
accurate  to  ±  0.03".  The  ITRF  should  show  no  global  net  rotation  or  translation 
with  time  (due  to  the  motions  of  the  stations  or  the  tectonic  plates  they  lie  on).  A 
more  complete  description  of  the  IERS  Terrestrial  Frame  is  given  by  Boucher  and 
Altamimi  (1989). 

The  Celestial  Frame  (ICRF)  is  defined  similarly,  using  the  coordinates  of  23 
"primary"  radio  sources  (Arias  et  al,  1988).  The  origin  is  at  the  barycenter  of  the 
solar  system.  The  direction  of  the  polar  axis  is  given  for  epoch  J2000.0  by  the  IAU 


224  EXPLANATORY  SUPPLEMENT 

1976  Precession  and  the  IAU  1980  Theory  of  Nutation  (see  Chapter  3).  Comparison 
of  optical  and  radio  observations  shows  that  the  origin  of  right  ascension  is  in 
agreement  with  that  of  the  FK5  star  catalog  to  within  ±  0.04".  The  parameters 
that  describe  the  rotation  of  the  ITRF  relative  to  the  ICRF  (in  conjunction  with 
the  precession  and  nutation  model)  are  the  Earth  rotation  parameters  (ERP).  For 
further  information  on  celestial  reference  frames,  see  Chapter  3. 

The  IERS  Standards  (McCarthy,  1990)  describes  the  models  to  be  used  when 
data  are  being  reduced  for  use  by  the  IERS  (and  asks  that  the  effects  of  deviations 
from  the  standards  be  determined).  The  next  section  contains  material  substantially 
drawn  from  those  standards. 

The  IERS  Reference  System  evolved  from  a  series  of  previous  systems.  As  noted 
above,  the  ITRF  is  itself  a  direct  continuation  of  the  BIH  Terrestrial  System  (BTS), 
first  established  in  1985  and  continued  through  1987.  The  BTS  had  in  turn  evolved 
from  the  BIH  1968  System,  which  was  established  in  1969  by  the  BIH  on  the  basis 
of  a  comparison  of  data  collected  by  the  BIH  and  the  International  Polar  Motion 
Service  (IPMS)  during  the  mid-1960s.  However,  it  should  be  emphasized  that  this 
was  not  a  complete  terrestrial  reference  system;  it  was  a  reference  system  for  di- 
rection only,  being  based  on  the  observed  astronomical  coordinates  of  the  involved 
observing  stations.  The  comparison  of  the  BIH  collected  data  with  the  IPMS  data 
allowed  the  BIH  1968  System  to  be  referenced  to  the  IPMS  reference  pole.  This 
pole  is  the  Conventional  International  Origin  (CIO)  which  was  the  approximate 
average  position  of  the  true  celestial  pole  of  the  Earth  from  1900.0  to  1905.0,  but 
was  actually  defined  by  the  adopted  latitudes  of  5  International  Latitude  Service 
(ILS)  stations.  (For  further  information  on  all  of  the  above,  see  IERS,  1989,  or  the 
BIH  Annual  Reports  for  the  appropriate  year(s),  or  see  Mueller,  1969  for  further 
information  on  these  systems  for  the  pre-1969  period.) 


4.3    GRAVITY,  THE  TIDES,  AND  MOTIONS  OF  THE  CRUST 

In  this  section,  various  phenomena  will  be  covered  that  affect  the  Earth's  gravity 
field  and  coordinates  of  a  given  station.  A  very  short  summary  of  one  method  of 
modeling  the  Earth's  gravity  field  (as  a  spherical  harmonic  series)  is  given,  along 
with  the  IERS  recommendations  for  a  "standard"  gravity  field.  This  is  followed  by, 
almost  verbatim,  the  IERS  Standards  recommendations  on  Earth  tides,  ocean  tides, 
ocean  and  atmospheric  loading,  and  plate  motions  (MCarthy,  1989).  Finally,  the 
effect  of  tides  on  the  Earth's  rotation  itself  is  described,  as  given  by  the  Standards. 

4.31    Modeling  the  Earth's  Gravity  Field 

The  Earth's  gravity  can  be  considered  as  a  force  that  is  the  sum  of  the  Earth's 
gravitational  force  and  the  centrifugal  force  resulting  from  the  Earth's  rotation. 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  225 

The  Earth's  external  gravitational  field  can  be  considered  a  potential  field 
whose  strength  V  fulfills  the  Laplace  equation 


AV  =  0,  (4-31-1) 


where  A  is  the  Laplacian  operator 


+       +  (4.31-2) 
dX2     dY2  8Z? 

in  a  cartesian  X,  Y,  and  Z  coordinate  system. 

It  is  possible  to  develop  a  solution  to  Equation  4.31-1  (Heiskanen  and  Moritz, 
1967.  pp.  15-35;  Torge,  1980,  pp.  26-29)  in  terms  of  a  series  of  Legendre  polynomials: 

PM)=—i—x^(t2-ir  (4-31-3) 

with  .. j. 

t  =  cosi/>  =  cos0cos0'  +  sin0sinl9'cos(A  -  A).  (4.31-4) 

xji  is  the  spherical  distance  on  a  unit  sphere  between  an  attracted  point  (at  spherical 
coordinates  r,  9,  A)  and  an  attracting  point  (at  r',  8',  A'). 

In  order  to  express  Pn(t)  as  a  function  of  the  spherical  coordinates  8  and  A,  it 
may  be  decomposed  using  associated  Legendre  Functions  of  the  first  kind  of  degree 
n  and  order  m,  obtained  by  differentiating  P„U)  m  times 

E."  p-M-v-er^PM-  (431-5) 

It  can  then  be  expressed  by  the  functions 

Pnm(cos0)cosmA,  (4.31-6) 
P„m(cos0)sinmA,  (4.31-7) 

known  as  surface  spherical  harmonic  functions. 

A  general  equation  for  the  gravitational  potential  then  becomes 


-  _  X^X"  k    ~  ; 

-  r  Z^t  2—i  („  +  m)l 

n=0  m=0 

x  I  ( pnffl(c0s  6)  cos mX  /  /  f     r"'P,„r,(coS  8')  cos  mXdm 

f\  J  J  ./Earth 

+  P^Ccqs  8)  sin  mX  fff     r'"P,„H(cos  8')  sin  mX  dm 

J  J  ./Earth 


(4.31-8) 


226  EXPLANATORY  SUPPLEMENT 

1  for  m  -  0 

2  form  t'O  ' 


jfc  = 


If  the  spherical  component  of  the  potential  of  the  Earth's  mass  M  is  separated 
out  (with  n  =  0),  the  ellipsoidal  semi-major  axis  a  is  used  to  provide  a  scale  for  the 
unit  sphere,  and  the  integrals  are  replaced  by  harmonic  coefficients,  Cnm  and  Snm, 
we  then  have 


GM 

T 


1  +  X!  ]L  (j)    (C™  C0S  mA  +  Snm  Sin  ^PnmiCQS  9) 


n=  I  m=0 


(4.31-9) 


In  many  cases,  an  alternative  notation  is 


Jn  =  -C„,  (4.31-10) 
]m  =  -Cmn,  (4.31-11) 
Knm=    S„m.  (4.31-12) 

It  may  be  convenient  to  use  fully  normalized  surface  spherical  harmonics: 


Pnm(cos  9)  =  Jk(2n  +  l)(-^LJ^pnm(cos  e),       k=  J  J    fTm-°  (4.31-13) 
y  (« +  m) !  [2  form^O 


This  results  in  fully  normalized  coefficients 


f  C„n  1  /  (n+fH)!  ~ 
I  Snm  J     Y*(2n  +  O(n-m)! 

It  should  be  noted  that  the  expansions  for  V  converge  rigorously  only  outside  a 
sphere  of  radius  a  that  just  encloses  the  Earth,  so  that  the  Laplace  equation  may  be 
satisfied.  In  practice,  however,  since  the  coefficients  are  normally  determined  em- 
pirically from  measurement  (e.g.,  from  satellite  observations),  the  series  can  always 
be  considered  to  converge.  Once  a  set  of  coefficients  are  determined  (see  the  next 
subsection)  the  expression  for  V  becomes  valid  and  useful  for  anywhere  in  space. 

The  same  expression  may  be  used  for  determining  the  gravitational  potential 
on  the  Earth's  surface.  However,  as  noted  previously,  it  is  the  gravity  potential,  here 
denoted  W  (including  centrifugal  force)  that  is  of  primary  interest  on  or  near  (i.e., 
moving  with)  the  Earth's  surface.  We  have 


jfc  = 


for  m  =  0 
for  m  7/  0 


(4.31-14) 


W=  V+l-i4{X2  +  Y\ 


(4.31-15) 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  227 

where  wE  is  the  angular  velocity  of  the  Earth,  and  X  and  Y  are  the  coordinates  of 
the  point  in  question  (P(X,  Y,Z)). 

It  should  be  noted  that  many  other  representations  of  the  Earth's  gravity  field 
exist  and  are  widely  used,  depending  on  the  application.  Most  commonly,  W  may 
be  determined  over  a  wide  area  or  the  Earth  itself,  using  measured  gravity-related 
data.  Any  of  the  standard  references  previously  mentioned  on  geodesy  and  geodetic 
astronomy  contain  detailed  information  on  these  types  of  computations. 


4.32   A  Representation  of  the  Earth's  Gravity  Field 

The  current  IERS  recommended  geopotential  field  is  the  GEM-T1  model  given  in 
Table  4.32.1.  The  GM  and  a  values  reported  with  GEM-T1  (398600.436  km3 /s2  and 
6378137  m)  should  be  used  as  scale  parameters  with  the  geopotential  coefficients. 
The  number  of  terms  actually  needed  to  provide  sufficient  accuracy  for  a  given 
application  will,  of  course,  vary.  For  example,  when  used  in  computing  the  orbit  of 
the  LAGEOS  satellite,  only  terms  through  degree  and  order  20  are  required. 

Values  for  the  C2i  and  S2i  coefficients  are  not  included  in  the  GEM-T1  model 
(they  were  constrained  to  be  zero  in  the  solution),  and  so  they  should  be  handled 
separately. 

The  C21  and  S21  coefficients  describe  the  position  of  the  Earth's  figure  axis 
with  respect  to  the  ITRF  pole.  When  averaged  over  many  years,  the  figure  axis 
should  closely  coincide  with  the  observed  position  of  the  rotation  axis  (or  "mean 
pole")  averaged  over  the  same  time  period.  Any  differences  between  the  mean  figure 
and  mean  rotation  axes  averaged  would  be  due  to  long-period  fluid  motions  in  the 
atmosphere,  oceans,  or  Earth's  fluid  core  (Wahr,  1987,  1990).  At  present,  there  is 
no  independent  evidence  that  such  motions  are  important;  so  it  is  recommended 
that  the  mean  values  used  for  C21  and  S2i  give  a  mean  figure  axis  that  corresponds 
to  the  mean  pole  position. 

The  BIH  Circular  D  mean  pole  positions  from  1982  through  1988  areconsistent 
to  within  +  0. 0005"  corresponding  to  an  uncertainty  of  ±  0. 01  x  10~9  in  C21  (IERS) 
and  52,  (IERS). 

If  the  mean  pole  during  this  period  coincided  with  the  ITRF  pole,  then  C2i  = 
S21  ~  0  could  indeed  be  used.  However,  the  poles  are  offset  by  the  angular  displace- 
ments x  and  y,  so  that 


C21  =  XC2Q, 

S21  =  — yC2o 


(4.32-1) 
(4.32-2) 


Table  4.32.1 

GEM-T1  Normalized  Coefficients  (x  106) 


Zonals 


Index 

Value 

Index 

Value 

Index 

Value 

Index 

Value 

ndex 

Value 

n 

m 

n 

m 

n 

m 

n 

m 

n 

m 

•2 

0 

-484.1649906 

3 

0 

0.9572357 

4 

0 

0.5387322 

5 

0 

0,0687802 

6 

0 

-0.1481004 

7 

0 

0.0905337 

8 

0 

0.0459023 

9 

0 

0.0283764 

10 

0 

0.057221 1 

11 

0 

-0.0512619 

12 

0 

0.0320806 

13 

0 

0.0422319 

14 

0 

-0.0197327 

15 

0 

0.0018731 

16 

0 

-0.009377a 

17 

0 

0,0203968 

18 

0 

0.0112912 

19 

0 

-0.0046084 

20 

0 

0.0153150 

21 

0 

O.OO97754 

22 

0 

-0.004844D 

23 

0 

-0.0241260 

24 

0 

-0.0009556 

25 

0 

0.0068867 

26 

0 

00018391 

27 

0 

0,0041234 

28 

0 

-0.0058541 

29 

0 

-0.0039091 

30 

0 

-0.0002749 

31 

0 

0.0051154 

32 

0 

0.0000819 

33 

0 

0.0022286 

34 

0 

-0.0024803 

35 

0 

0.0012731 

36 

0 

0.0007396 

Sectorials  and  Tesserals 

Index   Value   Index   Value   Index   Value 

n      m  C  S  n     m  C  S  n     m  C  S 


"  3 

2  0297737 

0.2495946 

6 

1 

-0.0813751 

0.0238900 

9 

1 

0.1480477 

0.0245251 

12 

1 

-0.0492610 

-0.0496520 

15 

1 

0.0082868 

0.0142124 

18 

1 

-0.0002253 

-0.0456055 

21 

1 

-0.0153942 

0.0417459 

24 

1 

0.0081178 

-0.0291987 

27 

1 

0.0005230 

0.0066113 

30 

1 

-0.0016171 

-0.0090886 

33 

1 

0.0012672 

0.0021258 

36 

1 

0.0028774 

-0.0058408 

4 

2 

0.3470021 

0.6640304 

7 

2 

0.31 771 08 

0.0916083 

10 

2 

-0.0805212 

-0,0513356 

13 

2 

0.0534361 

-0.0575844 

16 

2 

-0.0156437 

0.0245431 

19 

2 

0.0084369 

-0.0104744 

22 

2 

-0.0142925 

0.0020958 

25 

2 

0.0037220 

0.0052068 

28 

2 

-0.0084276 

-0.0115524 

31 

2 

0.0066008 

0.0008362 

34 

2 

0.0035817 

0.0051783 

3 

3 

0.7209866 

1.4131694 

6 

3 

0.0619709 

0.0046430 

9 

3 

-0.1553742 

-0.0840158 

12 

3 

0.0324198 

0.0179438 

15 

3 

0.0446271 

0.0265447 

18 

3 

-0.0010020 

-0.0070483 

21 

3 

0.0019941 

0.0226923 

,1 

1 

-0  5334272 

-0,4751 189 

7 

1 

0.2770971 

0.0978177 

10 

1 

0.0769655 

-0.1381110 

13 

1 

-0.0540617 

0.0434555 

16 

1 

0.0317099 

0.0173493 

19 

| 

-0.0115942 

0.0053764 

22 

1 

0.0083946 

-0.0147250 

25 

1 

0.0037145 

0.0043498 

26 

1 

0.0065294 

-0.0100251 

31 

1 

0.0051782 

0.0023829 

34 

1 

-0.0015608 

-0.0091011 

2 

2 

2,4389280 

-1.3998397 

5 

2 

0.6557902 

-0.3234056 

8 

2 

0.0703801 

0.0684494 

11 

2 

0.0090541 

-0.0992414 

14 

2 

-0.0348122 

-0.0060681 

17 

2 

-0.0057800 

0.0171247 

20 

2 

0.0198772 

0.0032259 

23 

2 

-0.0005313 

-0.0017780 

26 

2 

-0.0052887 

0.0002522 

29 

2 

0.0094632 

-0.004331 1 

32 

2 

0.0018649 

0.0043749 

35 

2 

-0.0025529 

0.0010277 

4 

3 

0.9909779 

-0.2006215 

7 

3 

0,2507429 

-0.2091639 

10 

3 

-0.0013119 

-0.1614824 

13 

3 

-0.0140259 

0.0836615 

16 

3 

-0.0320841 

-0.0450272 

19 

3 

0.0014391 

0.0141955 

22 

3 

0.0067253 

-O.008O913 

5 

1 

-0.0589503 

-0.0955435 

8 

1 

0.0288561 

0.0547223 

11 

1 

0.0095019 

-0.0278111 

14 

1 

-0.0187462 

0.0232244 

17 

1 

-0.0309381 

-0.0268459 

20 

1 

0.0145119 

-0.0212711 

23 

1 

0.0008657 

0.0145970 

26 

1 

0.0049741 

-0.0172518 

29 

1 

0.0034699 

0.0024176 

32 

1 

-0.0091529 

-0,0092451 

35 

1 

-0.0019069 

0.0020110 

3 

2 

0.9035491 

-0.6204198 

6 

2 

0.0516096 

-0.3749956 

9 

2 

0.0311365 

-0.0323882 

'2 

2 

0. 0076400 

0,0349183 

15 

2 

-0.0216258 

-0.0364425 

18 

2 

0.0084083 

0.0168428 

21 

2 

0.0009874 

-0.0026067 

24 

2 

-0.0058515 

0.0052022 

27 

2 

0.0102174 

-0.0028223 

30 

2 

-0.0040515 

-0.0053645 

33 

2 

-0.0010231 

00009548 

36 

2 

0.0001 790 

0.0012922 

5 

3 

-0.4482036 

-0.2151363 

8 

3 

-0.0199664 

-0.0869367 

11 

3 

-0.0288895 

-0.1324963 

14 

3 

0.036931 1 

0.0224222 

17 

3 

0.0101214 

0.0098939 

20 

3 

0.0082691 

0.0137151 

23 

3 

-0.0045642 

-0.0119458 

Table  4.32.1,  continued 

GEM-T1  Normalized  Coefficients  (x  106) 


Index  Value  Index   Value   Index   Value 

n     m~       C  S  n     m         C  S  n     m         C  s 


24 

3 

0.0069148 

-0.0105925 

25 

3 

-0.0032642 

-0.0031087 

26 

3 

-0.0002621 

-0.0037215 

27 

3 

-0.0051035 

-0.0018585 

28 

3 

-0.0002646 

0.0011662 

29 

3 

-0.0043864 

-O.O0 17609 

30 

3 

—0,0016075 

0.001 4770 

31 

3 

—  0.0018668 

—0.0040769 

32 

3 

—  0.0006663 

0.0029992 

33 

3 

-0.0017072 

—0.0028776 

34 

3 

—  0.0005145 

0.0022065 

35 

3 

0.0006733 

0.0006861 

36 

3 

-0.0008129 

—0,0013852 

4 

4 

—0.1900348 

0.3084595 

5 

4 

—  0.2948236 

0.0524087 

6 

4 

-0.0927975 

-0.4733069 

7 

4 

-0.2737404 

-0.1220207 

8 

4 

-0.2460639 

0.0677453 

9 

4 

-0,0128303 

0.0232637 

10 

4 

-0.0973123 

-0.0693825 

11 

4 

-0.0332108 

-0.0700036 

12 

4 

-0.0653020 

-0.0030125 

13 

4 

—0.0088182 

-00003732 

14 

4 

-0,0088329 

0.0018783 

■5 

4 

-0,0443760 

0.0126416 

16 

4 

0.0365123 

0.0438559 

17 

4 

0.01 25878 

0.0312242 

16 

4 

0.0434167 

0.0060924 

19 

4 

0.0025699 

0,0076747 

20 

4 

-0,0017951 

0.0008281 

21 

4 

-0.0002550 

0.0069894 

22 

4 

-0,0094462 

0.0167100 

23 

4 

-0.0100336 

-0.0016696 

24 

4 

0.0060580 

0.0181145 

25 

4 

0.0063503 

-0.0015335 

26 

4 

0.0053222 

0.0048968 

27 

4 

0.0029164 

-0.0006401 

28 

4 

0.0028786 

-0.0024855 

29 

4 

-0.0063641 

0.0007289 

30 

4 

-O.0021 102 

-0.0039250 

31 

4 

-0.0049509 

—0.0016392 

32 

4 

0.0020179 

-0.0033825 

33 

4 

-0.0002362 

0,0003938 

34 

4 

0.0028502 

-0.0018773 

35 

4 

0.0027442 

0.0014864 

36 

4 

0.0001181 

-0.0058408 

5 

5 

0.1777563 

-0.6660281 

6 

5 

-0.2657650 

-0.5377472 

7 

5 

0.0034750 

0.0196519 

8 

5 

-0.0249335 

0.0853003 

9 

5 

-0.0141122 

-0.0600627 

10 

5 

-0.0504401 

-0.0438269 

11 

5 

0.0459086 

0.0552848 

12 

5 

0.0306040 

-0.0014745 

13 

5 

0,05961 76 

0.0574460 

14 

5 

0.0227952 

-0.01 16078 

15 

5 

0.0160742 

0.0108864 

16 

5 

-0.0077242 

-0.0016773 

17 

5 

-0,01 1 1472 

-0.0056031 

1B 

5 

0.0017426 

0.021 1276 

19 

5 

-»0.0024457 

0.0173789 

20 

5 

-0.0104182 

0.0003034 

21 

5 

0.0177593 

-0.0158911 

22 

5 

-0.0046335 

-0.0001257 

23 

5 

0.0019941 

-0.0079407 

24 

5 

-0.0140838 

-0.0079805 

25 

5 

-0.0024585 

-0.0023514 

26 

5 

0.0043007 

0.0106472 

27 

5 

-0.0015884 

0.0037103 

28 

5 

0.0029222 

-0.0002361 

29 

5 

0.0034464 

0.0035422 

30 

5 

0.0033916 

0.0006983 

31 

5 

0.0009096 

0.0014649 

32 

5 

-0.00004BO 

-0.0027949 

33 

5 

-0.0005132 

0.0032353 

34 

5 

-0.0012952 

0.0000401 

35 

5 

-0.0002351 

-0.0007374 

36 

5 

-0.0011798 

0.0003403 

6 

6 

0.0090593 

-0.2363344 

7 

6 

-0.3578527 

0.1509175 

8 

6 

-0.0664178 

0.3128323 

9 

6 

0.0705263 

0.2166285 

10 

6 

-0.0347366 

-0.0777189 

11 

6 

0.0084723 

0.0242910 

12 

6 

0.0013881 

0.0458322 

13 

6 

-0.0223869 

-0.0116360 

14 

6 

-0.0031868 

0.00651 19 

15 

6 

0,0272318 

-0.0517077 

16 

6 

0.0179949 

-0.0267835 

17 

6 

0.0002920 

-0.0204166 

18 

6 

00311991 

-0.0085569 

19 

6 

-0.0062545 

0.0039169 

20 

6 

0.0127607 

0.0009662 

2' 

6 

0.00421 46 

-0.0083501 

22 

6 

0.0146261 

0.0024348 

23 

6 

0-0099988 

0.0049568 

24 

6 

-0.0003055 

-0.0006641 

25 

6 

0.0059358 

-0.0067430 

26 

6 

0.0085388 

0.0031968 

27 

6 

0.0017746 

-0.0021342 

28 

6 

-0.0083296 

0.0020029 

29 

6 

-0.0002960 

-0.0024663 

30 

6 

-0.0032177 

0,0041679 

31 

6 

-0.0005622 

0.0007667 

32 

6 

-0.0038310 

0.0002190 

33 

6 

0.0013824 

-0.0012542 

34 

6 

0.0005808 

-0.0003220 

35 

6 

0.0008304 

-0.0014752 

36 

6 

-0.0005757 

-0.0008988 

7 

7 

0.0015976 

0,0220013 

8 

7 

0.0704248 

0.0748626 

9 

7 

-0.1186233 

-0.1005510 

10 

7 

0.0097468 

-0.0042901 

11 

7 

0.0096093 

-0.0918891 

12 

7 

-0.0126975 

0.0348291 

13 

7 

0.0035736 

-0.0066171 

14 

7 

0.0374843 

-  0.0043588 

15 

7 

0.0667130 

0.0114545 

16 

7 

0.003051 1 

-0.0090737 

17 

7 

0.0229520 

-0.01 19809 

IS 

7 

-0.0007957 

0  0067159 

19 

7 

0.0051443 

-0.0016620 

20 

7 

-0.0077913 

0.0048958 

21 

7 

-0.0122279 

-00014058 

22 

7 

0.0127538 

0.0013042 

23 

7 

-0.0023282 

0.0026452 

24 

7 

-0.0025113 

0.0050662 

25 

7 

0.0002632 

0.0034596 

26 

7 

0.0054524 

0,0025831 

27 

7 

0.0069279 

-0.0028217 

28 

7 

-0.0046459 

-0.0015444 

29 

7 

0.001 1 830 

-0.0072940 

30 

7 

-0.0001720 

-0.0001291 

31 

7 

0.0014817 

-0.0017479 

32 

7 

-00030832 

0.0018611 

33 

7 

-0.0000405 

0.0017756 

34 

7 

0.0023148 

0.0001028 

35 

7 

0.0000748 

0.001 5282 

36 

7 

-0.0001662 

-0.0004199 

8 

8 

-0.1188827 

0.1223320 

9 

8 

0.1844954 

-0.0018494 

10 

8 

0.0437468 

-0.0924808 

11 

8 

-0.0063530 

0.0225827 

12 

8 

-0.0212177 

0,0169046 

13 

8 

-0.0122964 

-0.0110925 

14 

8 

-0.0329416 

-0.0131814 

15 

8 

-0.0406660 

0,0247325 

1 6 

S 

-0.0134376 

0.0022804 

17 

8 

0.0311564 

0.0087750 

18 

8 

0.0457191 

0.0004305 

Table  4.32.1,  continued 

GEM-T1  Normalized  Coefficients  (x  106) 


Index  Value  Index  Value    Index   Value 


17 

Q 

s 

fn 

c 

S 

19 

g 

0.0148626 

-0.01 13273 

20 

6 

-0,0020109 

-0,0012912 

21 

8 

-0.0181008 

0.0025208 

22 

e 

—0.0098173 

-0.0068267 

23 

8 

0.0042209 

-0.0067954 

24 

8 

-0.0024330 

0.0075574 

25 

5 

0.0014256 

-0.0041241 

26 

8 

0.0030889 

-0,0021407 

27 

8 

-0.0041794 

-0.0044059 

28 

8 

-0.0005655 

-0,0031778 

29 

8 

-0.0064245 

0,0025406 

30 

8 

0.0029536 

0.0005720 

31 

8 

0.0000872 

-0.0011845 

32 

8 

0.0008818 

0.0033226 

33 

8 

-0,0000823 

0.0015750 

14 

Q 

-0.0007860 

35 

8 

0.0002679 

0.0001772 

36 

8 

-0.0010487 

-0.0005378 

y 

g 

0.0975889 

1 0 

9 

0.1281797 

-0.0481860 

1 1 

g 

-0.0387774 

0.0402849 

1  p 

9 

0.0132223 

13 

9 

0.0203827 

0.0457820 

14 

9 

0.0371 609 

0.01 79332 

15 

9 

0.0134441 

0.0410187 

16 

9 

-0,0165750 

-0.0509825 

17 

9 

-0.0032015 

-0.0343246 

18 

9 

-0.0135216 

0.0192446 

19 

9 

0.0017566 

0.0086593 

20 

9 

0.0228121 

0.0072350 

£.  1 

9 

0  0173205 

-0  0093913 

22 

9 

0.0125106- 

-0.0094816 

23 

9 

-0.0040274 

-0.0103916 

OA 

g 

o oniRQ40 

-f)  001410? 

25 

g 

—0.0060297 

O.0O98442 

26 

9 

0.0025191  - 

-0.0006592 

9 

o  0001 qqo 

n  oopi^sfi 

28 

9 

0.0029414- 

-0.0030550 

29 

9 

-0.0016394 

0.0024790 

30 

9 

0,0001 665 

-0.0039351 

31 

9 

-0.0038941 

-0.0017016 

32 

9 

0.0019461 

0.0007681 

33 

9 

-0.0002939 

0.0018691 

34 

9 

0.0012660 

0.0015093 

35 

9 

0.0010826 

-0.0020731 

ir 

Ov 

9 

n  oonn 70 

—  U.UuUO  1  fu 

10 

10 

0.0945596- 

-0.0201041 

11 

10 

-0.0520582 

-0.0176126 

12 

10 

V-f . U O  luf  Uu 

13 

10 

0.0433028 

-0.0380383 

14 

10 

0.0369953- 

-0.0027966 

15 

10 

o  nifinm  ? 

U.  V  1  ^  Uir-  P  C- 

16 

10 

—0.0104171 

0.0066056 

17 

10 

0.0021050 

0.0201193 

18 

10 

0.0090063 

-0.0108619 

19 

10 

-0.0353538 

-0.0026556 

20 

10 

-0.0224201  - 

-0.0080926 

21 

10 

0.0036543 

0.0018356 

22 

10 

0.0050062 

0.0203830 

23 

10 

0.0199758 

-0,0037585 

24 

10 

0  0092954 

25 

10 

0.0056907- 

-0.0044669 

26 

10 

-0.0048370 

0.0016645 

27 

10 

-^o  oorhoo 

l/FUUOJ  1  UVJ 

0  00R01 1? 

28 

10 

—  0.0072826 

0.0012046 

29 

10 

0.0000602 

0.0060144 

30 

10 

o  ooipp-rs- 

31 

10 

0.0025178- 

-0.0037447 

32 

10 

0.0008308- 

-0.0019507 

33 

10 

0.0002341 

-0.0009449 

34 

10 

-0.0014879- 

-0.0000093 

35 

10 

-0.0014313 

-0.0008354 

36 

10 

-0.0003570 

0.0004671 

11 

11 

0.0543322- 

-0.0547288 

12 

11 

0.0054143- 

-0.0095228 

13 

11 

—0  0401906 

0  005501*5 

14 

11 

0.0080835- 

-0.0413614 

15 

11 

0.0017171 

0.0289322 

16 

11 

o  01401  ^fi- 

-0  00K41fifi 

17 

11 

—  0.0171 108 

0.0175019 

18 

11 

—0.0127989 

-0.0005971 

19 

1 1 

0  01  147  4fi 

20 

11 

n  01 1 3787- 

-0  0239305 

21 

11 

0.0092806- 

-0.0367834 

22 

11 

-0.0093740- 

-0.0163775 

23 

11 

0.0038490 

0.0136794 

24 

11 

0.0127396 

0.0121180 

25 

11 

0.0055793- 

-0.0012766 

26 

11 

0.0032045 

0,0050467 

27 

11 

-0.0011883- 

-0.0030951 

28 

—  fl  000RP14- 

_n  ooor?qo 

\J .  PJ  UuO£  3  PJ 

29 

1 1 

—0  0093226 

0  0004548 

30 

11 

—0.0016207 

0.0050752 

31 

11 

—  0  0G1fifi11 

o  oorr^pi 

32 

11 

—0.0024010- 

-0.0006463 

33 

11 

0.0055568- 

-0.0004803 

34 

1 1 

0.0012406- 

-0  ooirip^ 

35 

1 1 

0.0006785  - 

-0.0036583 

36 

11 

0.0005880- 

-0.0007308 

12 

12 

-0.0035280- 

-0+01 17964 

13 

12 

-0.0280059 

0.0864102 

14 

12 

0,0089681  - 

-0.0320668 

15 

12 

-0.0283317 

0.0124872 

16 

12 

0.0208803 

0.0057370 

17 

12 

0.0342734 

0.01 72570 

18 

12 

1 9 

12 

0  0032037 

0  0043292 

20 

12 

-0.0040581 

0.0172980 

21 

12 

22 

12 

0  0074177 - 

-0  007R4?fi 

23 

12 

0.021 5777  - 

-0.0166812 

24 

12 

0  01P1406- 

_n  ooqm 

25 

12 

—0  00S^4.?5 

o  m 10100 

26 

12 

-0.0196457 

0.0054338 

27 

12 

-0.0004228- 

=0.0017182 

28 

12 

0,0004024 

0.0024269 

29 

12 

-0.0008339- 

-0.0049254 

30 

12 

0.0037915- 

-0.0034240 

31 

12 

0.0001491 

0.0046159 

32 

12 

-0.0017118 

0.0041940 

33 

12 

0  0041PRR 

34 

12 

n  nop4R7R 

35 

23 

0  0014841  - 

-0.0020619 

36 

12 

o  nonpiRp 

-U.UU  1  uUOo 

13 

13 

0  OKI -=;4£l1 

U.UDatDD  I 

14 

13 

0  0315333 

0_0446234 

1 5 

13 

—  U.UZo  I UD  I  - 

-u.uuH-yo.cy 

1  o 

IO 

U.UUUD  1 0* 

17 

13 

0. 0201 122 

18 

13 

— U.UUDOQ  ID- 

-U.UOD  I  DO  I 

1 Q 

i  y 

1  <D 

— u.uuDutsyH  - 

20 

13 

0.0048913 

21 

13 

-0.0181694 

0.0115969 

22 

13 

-0.01 69455 

0.0178453 

23 

13 

-0.0104578  = 

-0.00751 12 

24 

13 

-0.0036235- 

-0.0003824 

25 

13 

0.0073795- 

-0.0151883 

26 

13 

0.0027230 

0.0014151 

27 

13 

-0.0059813- 

-0.0041287 

28 

13 

0.0000983 

0.0035308 

29 

13 

-0.0011458- 

-00019753 

30 

13 

0,0146742- 

-0.0000192 

31 

13 

0.0056871 

0.0013250 

32 

13 

0.0072556 

0.0002229 

33 

13 

0.0036684 

0.0067767 

34 

13 

-0.0080803 

0.0012768 

35 

13 

-0.0011849 

0.0044812 

36 

13 

0.0007685 

0.0037948 

14 

14 

-0.0505657- 

-0.0063741 

15 

14 

0.0061707- 

-0.0256132 

Table  4.32.1,  continued 

GEM-T1  Normalized  Coefficients  (x  106) 


Value  Index  Value    Index   Value 


n 

c 

S 

n 

m 

C 

S 

n 

m 

C 

S 

10 

14 

-0.0191226 

-0.0382895 

17 

14 

-0.0133370 

0.0117613 

18 

14 

-0.0092828- 

-0.0109400 

14 

-0.0051227 

-0.0126448 

20 

14 

0.0103228- 

-0.0117620 

21 

14 

0.0187760 

0.0086994 

14 

0.0087260 

0.0102407 

23 

14 

0.0046108- 

-0.0032737 

24 

14 

-0.0186436 

0.0014570 

25 

14 

-0.0219418 

0.0132058 

26 

14 

0.0039290 

0.0056350 

27 

14 

0.0119702 

0.0066379 

28 

14 

-0.0021064 

-0,0065025 

29 

14 

-0.0051525 

0.0019409 

30 

14 

-0.0000327- 

-0.0025522 

ol 

14 

-0,0072828 

0,0012481 

32 

14 

0.0046569 

0,0069216 

33 

14 

0.0092319 

0.0025099 

OH 

14 

-0.0010431 

-0.0002878 

35 

14 

-0.0004836- 

-0.0001238 

36 

14 

-0.0048384- 

-0.0040665 

To 

15 

-0.0180948 

-0,0080854 

16 

15 

-0.0125321 

-0.0322958 

17 

15 

0.0049435 

0.0057493 

18 

15 

-0.0377619 

-0.0198247 

19 

15 

-0.0183164- 

-0.0127675 

20 

15 

-0.0227306- 

-0.0004135 

21 

15 

0.0166205 

0.0149837 

22 

15 

0.0279373 

0.0031033 

23 

15 

0.0177318- 

-0.0022813 

OA 

15 

0,0098097 

-0.0135286 

25 

15 

-0.0019899 

-0.0022710 

26 

15 

-0.0113797 

0.0047010 

£.1 

15 

—0.0043373 

0.0001002 

28 

15 

-0.0082106 

0.0053751 

29 

15 

-0,0012718- 

-0.0024918 

•jyJ 

15 

0,0028146 

-0.0092780 

31 

15 

0.0004541 

-0.0043732 

32 

15 

0.0039107- 

-0.0049375 

33 

15 

-0.0030055 

0.0021726 

34 

15 

0.0007643 

0.0030005 

35 

15 

0.0002609 

0.0028304 

36 

15 

-0.0018223 

0.0018634 

16 

16 

-0.0324114 

-0.0043686 

17 

16 

-0.0290683 

0.0018848 

1  R 

16 

0.0097880 

0.0050024 

19 

16 

-0.0199047 

-0,0119326 

20 

16 

-0.0106685 

0.0016919 

0^ 
e  l 

1 6 

0.0087331 

-0.0051553 

22 

16 

0.0000892- 

-0.0049265 

23 

16 

0.0049029 

0.0117671 

24 

16 

—0.0004908 

0.0062766 

25 

16 

0.0030419 

-0.0127972 

26 

16 

0.0058241  - 

-0,0041510 

27 

16 

0.0065849 

-0.0041072 

28 

16 

-0.0083073- 

-0.0076860 

29 

16 

-0.0021980- 

-0.0055327 

30 

16 

0.0006189 

0.0056597 

31 

16 

-0.0045141 

0.0048013 

32 

16 

0.0029187 

0.0041010 

33 

1 6 

—0.0003879 

0.0019724 

34 

16 

0.0011337 

-0.0026578 

35 

16 

0.0001314- 

-0.0013369 

36 

16 

0.0013405 

-0.0020055 

17 

17 

-0.0383106- 

-0.0206234 

18 

17 

0.0061142 

0.0087663 

19 

17 

0.0279459 

-0.0108837 

20 

17 

0.0042934 

-0.0089776 

21 

17 

-0.0067459 

0.0008396 

22 

17 

0.0138079 

-0.0111258 

23 

17 

-0.0072125 

-0.0066031 

24 

17 

-0.0084625 

0.0018817 

25 

17 

-0.0083083 

0.0005500 

26 

17 

-0.0048890 

0.0082820 

27 

17 

0.0055505 

0.0015914 

28 

17 

0  0045201 

-0.0042606 

29 

17 

0.0045708 

-0,0027849 

30 

17 

0.0010057- 

-0.0015438 

31 

17 

—0.0059335 

0.0025686 

32 

17 

-0.0036602 

0.0018909 

33 

17 

-0.0021426 

0.0030432 

34 

17 

0  0025764 

35 

17 

0.0033863 

-0.0024391 

36 

17 

0.0021679- 

-0.0008490 

18 

18 

-0.0044492 

-0.0050647 

19 

18 

0.0216467- 

-0.0031131 

20 

18 

0.0105771 

0.0013024 

21 

18 

0.0168304 

-0.0065691 

22 

18 

0.0070311 

-0.0102955 

23 

18 

-0.0019056 

-0.0063023 

24 

18 

n  004107? 

-0. 0050725 

25 

18 

-0.0013004- 

-0.0106697 

26 

18 

-0.0090148 

0.0075516 

27 

18 

—0  O0R1RQR 

0  00^0(194 

28 

18 

0.0003645 

-0.0008295 

29 

18 

-0.0020095 

-0.0001378 

30 

18 

fl  000101=1 

U  .UUUvJUiJ  J 

o  oonftsio 

31 

18 

0,0025645 

0.0008491 

32 

18 

0.0022105- 

-0.0014795 

33 

18 

0.0008702 

-0.0012393 

34 

18 

-0.0027232 

-0.0000869 

35 

18 

0.0015003 

-0.0005937 

36 

18 

0.0000693 

0.0005306 

19 

19 

0.0064638 

0.0104244 

20 

19 

-0.0070980 

0.0084586 

21 

19 

—0  020951  5 

0  01  5R7Q0 

22 

19 

0.0066210- 

-0.0046952 

23 

19 

-0,0086827 

0.0074916 

24 

19 

0  000^374 

-0  01  ^017Q 

25 

19 

0.0091802 

0.0021317 

26 

19 

0.0016260 

0.0007199 

27 

19 

n  OO0Q?^4 

-0  nofipio^ 

28 

19 

0.0044182 

0.0138003 

29 

19 

-0.0021920 

0.0015059 

30 

19 

-0.0056266 

-0.0026384 

31 

19 

0.0020172 

0.0028162 

32 

19 

0.0030881- 

-0.0015146 

33 

19 

0.001 6796 

0.0002369 

34 

19 

0.0005953 

-0.0010032 

35 

19 

-0.0029031 

0.0005932 

36 

19 

—0  ooopfifip 

-0  OOOORQ^I 

20 

20 

0.0017085 

-0,0135051 

21 

20 

-0.0190411 

0.0185361 

22 

20 

0  01 477AQ 

23 

20 

0.0172248 

-0.0090475 

24 

20 

-0.0060619 

-0.0003298 

25 

20 

n  nnRR? 1 7 

U.uVDO^  1  / 

26 

20 

0.0094830 

-0.0109488 

27 

20 

0.0029525 

0.0030106 

28 

20 

-0.0009805 

0.0011271 

29 

20 

-0.0047996 

0.0031625 

30 

20 

-0.0000276 

0.0035666 

31 

20 

0.0018947 

0.0005595 

32 

20 

-0.0015881 

0.0014199 

33 

20 

0.0020822 

-0.0007525 

34 

20 

0.0008917 

-0.0003975 

35 

20 

-0.0007745 

-0.0008763 

36 

20 

-0.0009128 

-0.0008661 

21 

21 

0.0024775 

-0.0068510 

22 

21 

-0.01 32244 

0.0075983 

23 

21 

0.0108195 

0.0076428 

24 

21 

0.0105744 

0.0011197 

25 

21 

0.0053968 

0.0031404 

26 

21 

-0.0003907 

-0.0024147 

27 

21 

0.0020712 

-0.0045432 

28 

21 

0.0024900 

0.0002697 

29 

21 

-0.0093986 

-0.0059494 

30 

21 

-0.0074518 

-0.0030982 

31 

21 

0.0023358 

0.0035767 

32 

21 

0.0011690 

0.0058848 

232 


EXPLANATORY  SUPPLEMENT 


Table  4.32.1,  continued 

GEM-T1  Normalized  Coefficients  (x  106) 


Index  Value  Index  Value  Index   Value 


n 

m 

C 

S 

n 

m 

C 

S 

n 

m 

C 

S 

33 

21 

0.0007319 

-0.0008394 

34 

21 

0.0013743 

-0.0006590 

35 

21 

0.0013843 

0.0027357 

36 

OH 

£A 

U,UUUr4l  I 

a  Anon 1 7c 

oo 

oo 

n  nm  /icoo 
—  u.uu  I  *fojio 

n  AA.H7H  QO 

oo 

oo 

d-d. 

n  aao 1  a  a c 

24 

22 

-0.0017322 

-0.0013033 

25 

22 

-0.0018741 

-0.0017578 

26 

22 

0.0109119 

0.0091610 

27 

22 

-0.0001430 

0.0029341 

28 

22 

-0.0048465 

0.0005118 

29 

22 

0.0096562 

0.0044395 

30 

22 

0.0032458 

-0.0055410 

31 

22 

-0.0062664 

-0.0057325 

32 

22 

-0.0046595 

0.0007455 

33 

22 

-0.0040992 

-0.0010974 

34 

22 

0.0008294 

0.0004221 

35 

22 

0.0000159 

0.0033003 

36 

22 

U.UUUO  (  OtL 

U.00UDOO4 

23 

23 

U.U00044O 

O.UUUdUoO 

24 

do 

A ArtOH  AtK 

-O.UUyUU55 

25 

23 

0.0045743- 

-0.0024633 

26 

23 

0.0023537 

0.0089516 

27 

23 

-0.0053881  - 

-0.0027372 

28 

23 

—0.0026403 

0.0063891 

29 

23 

—0.00501 18 

-0,0000780 

30 

23 

-0.0015833- 

-0,0053377 

31 

23 

0.0095047 

0.0056544 

32 

23 

0.0038573 

0.0004759 

33 

23 

—0.0006277- 

-0.0043975 

34 

23 

-0.0009300- 

-0.0021403 

35 

23 

-0.0023783 

-0.0015551 

36 

23 

-0.0012168- 

-0.0005S18 

24 

24 

0.0023438- 

-0.0012129 

25 

24 

0.0036065- 

-0.0036584 

26 

24 

—0.0013736 

0.0121837 

27 

24 

-0,0019361 

0.0026238 

28 

24 

0.0068762- 

-0.0150841 

29 

24 

-0.0025342 

0.0037024 

30 

24 

-0.0025120- 

-0.0000377 

31 

24 

-0.0038298- 

-0.0019101 

32 

24 

—0.0065905 

0.0053251 

33 

24 

0.0039903- 

-0.0004821 

34 

24 

0.0067267 

0.000851 1 

35 

24 

0.0025277 

0.0021953 

36 

24 

0.0006589- 

-0.0014201 

25 

25 

0.0049455 

0.0040141 

26 

25 

-0.0039876 

0.0082488 

27 

25 

0.01 18014 

0.0031453 

28 

25 

0.001 1295  - 

-0.0048096 

29 

25 

0,0083057 

0.0036286 

30 

25 

0,0088475 

-0.0056062 

31 

25 

-0.0077449- 

-0.0002757 

32 

25 

-0.0131730 

0.0077043 

33 

25 

—0.0012628- 

-0.0048224 

34 

25 

0.006251 6- 

-0.0082080 

35 

25 

—  0.0033892 

0.0015231 

36 

25 

0.0000270 

0.0086477 

26 

26 

0.0034281  - 

-0.0042690 

27 

26 

-0.0050080 

0.0040035 

28 

26 

0.0034421 

0.0016811 

29 

26 

0.0062584- 

-0.0036878 

30 

26 

-0.0032087 

0.0081399 

31 

26 

—0.0046923 

0.0003639 

32 

26 

—0.001051 1  - 

-0.0015337 

33 

26 

n  Arto  H  o  H  o 

0.0081343 

U.Uuobjob 

34 

26 

0  0010R1B- 

\J.\A\J &\J\J\J  P 

35 

26 

—0  01  4343R- 

-0  0001412 

36 

26 

0.0084469 

0.01 10849 

27 

27 

0.0068945 

0.0034538 

28 

27 

—0.0099247 

0.001 3336 

29 

27 

-0.0074725- 

-0.0021507 

30 

27 

—0.0019206 

0  007R1SP 

31 

27 

o  nofi^qfio 

VbUyU^V  uy 

0.0122525 

32 

27 

-0.0030949- 

-0.0030221 

33 

27 

-0.0103323- 

-0.0021297 

34 

27 

0.0068974- 

-0.0005442 

35 

27 

0.0027787- 

-0.0191290 

36 

27 

—0.0101912 

0.0042305 

28 

28 

0.0067689 

0.0019493 

29 

28 

0.01 03226- 

-0.0019625 

30 

28 

-0.0089658- 

-0  0051 589 

31 

28 

0  0003428 

0  0017261 

32 

28 

0.0015717 

0.0023530 

33 

28 

—  0.0108851 

34 

28 

-0.0081 979 

35 

28 

—0.01 08936- 

-0.0233542 

36 

28 

0.0069480 

0.0056619 

29 

29 

0  0086336 

0.0031601 

30 

29 

0.0048227 

0.0001240 

31 

29 

-0.0054215- 

-O0O59502 

32 

29 

-0.0033428 

0.0025024 

33 

29 

-0.0213209 

0.0001932 

OA 

29 

—0.00381 13- 

-0.0044842 

35 

29 

—0.0039791 

0.0005664 

36 

29 

—  0.0013415- 

30 

30 

-0.0015075- 

-0.0004221 

31 

30 

—0.0024527 

0  0084230 

32 

30 

0.0082893 

0.0016713 

33 

30 

0.0025217- 

-0.0134935 

34 

30 

-0.0061161 

0.0000268 

35 

30 

0.0037128- 

0.0028852 

36 

30 

-0.0015551- 

-0.0020261 

31 

31 

-0.0002319- 

-0.0000737 

32 

31 

-0.0007616- 

-0.0027125 

33 

31 

0.0001 745 

0.0011566 

34 

31 

0.0023534 

0.0022983 

35 

31 

0.0013305 

0.0010339 

36 

31 

-0.0035516 

0.0013604 

32 

32 

0.0007277 

0.0005068 

33 

32 

0.0024100- 

0,0000219 

34 

32 

-0.0008166- 

-0.0011610 

35 

32 

-0.0039791 

0.0005664 

36 

32 

-0.0008804- 

0,0003000 

33 

33 

-0.0002676- 

-0.0003603 

34 

33 

0.0010234 

0.0013813 

35 

33 

-0.0002881 

0.001 6655 

36 

33 

-0,0023972- 

-0.0026170 

34 

34 

-0.0002093- 

-0.0006039 

35 

34 

-0.0005168 

0,0001237 

36 

34 

0.0008324 

0.0017560 

35 

35 

0.0000938- 

-0.0001450 

36 

35 

0.0002152- 

0.0007347 

36 

36 

0.0001484 

0.0004197 

*  Cgo  does  not  include  1he  zero-frequency  term;  see  Equation  4,332-5  for  the  adjusted  value. 

"  Cgi  and  Sji  should  be  the  IERS  values;  see  Equations  4,32-3  and  4.32-4  for  recommended  values. 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  233 

should  be  added  to  the  geopotential  model  (Lambeck,  1971).  This  gives  normalized 
coefficients  of 

C21(IERS)  =  -0. 17  x  1CT8,  (4.32-3) 
52i(IERS)  =  1. 19  X  1CT9.  (4.32-4) 

For  consistency  with  the  IERS  Terrestrial  Reference  Frame,  the  C2KIERS)  and 
521(IERS)  should  be  used  in  place  of  C2l  (GEM-T1)  and  52i(GEM-Tl). 

4.33   Solid  Earth  Tides 

The  solid  Earth  tide  model  is  based  on  an  abbreviated  form  of  the  Wahr  model 
(Wahr,  1981)  using  the  Earth  model  1066A  of  Gilbert  and  Dziewonski  (1975).  The 
Love  numbers  for  the  induced  free  space  potential,  k,  and  for  the  vertical  and 
horizontal  displacements,  h  and  /,  have  been  taken  from  Wahr's  thesis,  Tables  13 
and  16.  The  long  period,  diurnal,  and  semi-diurnal  terms  are  included.  Third-degree 
terms  are  neglected. 

4.331  Calculations  of  the  Potential  Coefficients  The  solid-tide-induced  free-space 
potential  is  most  easily  modeled  as  variations  in  the  standard  geopotential  coef- 
ficients Cnm  and  Snm  (Eanes  et  al,  1983).  The  Wahr  model  (or  any  other  having 
frequency-dependent  Love  numbers)  is  most  efficiently  computed  in  two  steps.  The 
first  step  uses  a  frequency-independent  Love  number  k2  and  an  evaluation  of  the 
tidal  potential  in  the  time  domain  from  a  lunar  and  solar  ephemeris.  The  second 
step  corrects  those  arguments  of  a  harmonic  expansion  of  the  tide-generating  po- 
tential for  which  the  error  from  using  the  k2  of  step  1  is  above  some  cutoff. 

The  changes  in  normalized  second-degree  geopotential  coefficients  for  step  1 

are 

v  3  j=2  j 

5    GM  <-~>  ri 

j=2  1 

AC22  -  ,'A522  =  1  Mh^t,  E  ^2(sin  4>j)e^, 
12  V  5     GM  ^— '  ri 

j=2  J 

where 


(4.331-1) 
(4.331-2) 
(4.331-3) 


#2  =  nominal  second  degree  Love  number; 
-Re  =  equatorial  radius  of  the  Earth; 


234  EXPLANATORY  SUPPLEMENT 

GM  =  gravitational  parameter  for  the  Earth; 

GMj  =  gravitational  parameter  for  the  Moon  (j  =  2)  and  Sun  (j  =  3); 
Tj  =  distance  from  geocenter  to  Moon  or  Sun; 
<j»j  =  body  fixed  geocentric  latitude  of  Moon  or  Sun; 
\j  -  body  fixed  east  longitude  (from  Greenwich)  of  Sun  or  Moon. 

The  changes  in  normalized  coefficients  from  step  2  are: 

ACnm-iASnm=Am  TSkJlJ   M  n  +  m    ™*  (4.331-4) 
'         \  -i  )  n  +  m   odd  ' 


v(n,»i) 

where 

A    -  M) 


f  1    if  m  =  0 
fc.=  (0    ifmyo  ;  (4.331-5) 


6ks  -  difference  between  Wahr  model  for  k  at  frequency  s  and  the  nominal 

value  k%  in  the  sense  ks  —  &2; 
Hs  -  amplitude  (m)  of  term  at  frequency  s  from  the  Cartwright  and  Taylor 

(1971)  and  Cartwright  and  Edden  (1973)  harmonic  expansion  of  the 

tide-generating  potential; 

n  =  six  vector  of  multipliers  of  the  Doodson  (1921)  variables; 
0  =  the  Doodson  variables; 
6S20  —  0. 

The  Doodson  variables  are  related  to  the  fundamental  arguments  of  the  nuta- 
tion series  (see  Chapter  3)  by 

s  =  F+  f2  =      (Moon's  mean  longitude); 

h  =  s  —  D  =  03  (Sun's  mean  longitude); 

P  =  s  -  I  =  04  (longitude  of  Moon's  mean  perigee); 
W  =  ~S2  =  0s  (negative  longitude  of  Moon's  mean  node); 
P\  =  s  —  D  —  I'  =  06  (longitude  of  Sun's  mean  perigee); 

T  =  9g  +  -n-s  =  0\  (time  angle  in  lunar  days  reckoned  from  lower  transit); 
By  =  mean  sidereal  time  of  the  conventional  zero  meridian. 

The  normalized  geopotential  coefficients  (C,„„,Sn,„)  are  related  to  the  unnormal- 
ized  coefficients  (Cnm,Snm)  by 

Cim  =  N„mCnm,  (4.331-6) 
Snm=NnmSnm,  (4.331-7) 


Nm 


(n  +  m)\(2n  +  \)(2-t>Qmyl 
(«  +  m)\ 


(4.331-8) 


TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  235 

Table  4.331.1 

Step  2  Solid  Tide  Corrections  When  k2  =  0. 30  in  Step  1  (Using  a 
Cutoff  Amplitude  of  9  x  10~12  iorAm6ksHs) 


Long-Period  Tides  {n  =  2,  m  =  0) 

None  except  zero-frequency  tide. 


Diurnal  Tides  (n  =  2,  m  =  1 ) 


n,  argument  multipliers 


Doodson  Number  t 

s 

h 

p 

N' 

P\  An 

SksHsX.  1012> 

145.555 

(Oi)  1 

0 

0 

0 

0 

-16.4 

163.555 

(Pi)  1 

-2 

0 

0 

0 

-49.6 

165.545 

0 

0 

-1 

0 

-9.4 

165.555 

(/Ci)  1 

0 

0 

0 

0 

507.4 

165.565 

0 

0 

1 

0 

73.5 

166.554 

M)  1 

1 

0 

0 

-1 

-15.2 

Semi-Diurnal  Tides  (n  =  2,  m  -  2) 

ri,  argumen)  multipliers 

,  »— - 

Doodson  Number     r      s       ft      p     Af      p\      Amf>ksHs  x  1012 


255.555  {M2)  2  0  0  0  0  0  39.5 
273.555      (Sj)      2        2      -2      0        0        0  18.4 


Using  a  nominal  £2  of  0.3  and  an  amplitude  cutoff  of  9  x  10~12  change  in  normalized 
geopotential  coefficients,  the  summation  S(n,m)  requires  six  terms  for  the  diurnal 
species  (n  =  2,  m  =  1)  modifying  C21  and  S2i  and  two  semidiurnal  terms  (n  -  2, 
m  =  2)  modifying  C22  and  S22-  With  the  exception  of  the  zero-frequency  tide,  no  long- 
period  terms  are  necessary.  Table  4.331.1  gives  required  quantities  for  correcting 
the  (2,1)  and  (2,2)  coefficients.  The  correction  to  C2o  is  discussed  in  more  detail 
below. 

Example:  The  step  2  correction  due  to  the  K\  constituent  is 

(AC21  x  ]012)a-,  =  507.4sin(r  +  .f) 
=  507.45^(9,,  +  tt) 

=  -507.4  sin(8(),  (4.331-9) 
(AS21  x  10l2k,  =  -507.4cos(e^).  (4.331-10) 

The  total  variation  in  geopotential  coefficients  due  to  the  solid  tide  is  obtained 
by  adding  the  results  of  step  2  (Equation  4.331-4)  to  those  of  step  1  (Equations 
4-331-l,  4.331-2,  and  4.331-3). 


236 


EXPLANATORY  SUPPLEMENT 


4.332  Treatment  of  the  Permanent  Tide  The  mean  value  of  AC20  from  equation 
4.331-1  is  not  zero,  and  this  permanent  tide  deserves  special  attention.  Ideally,  the 
mean  value  of  the  correction  should  be  included  in  the  adopted  value  of  C2o  and 
hence  not  included  in  the  AC20.  The  practical  situation  is  not  so  clear,  because 
satellite-derived  values  of  C2n,  as  in  the  GEM  geopotentials,  have  been  obtained 
using  a  mixture  of  methods,  some  applying  the  corrections  and  others  not  applying 
it.  There  is  no  way  to  ensure  consistency  in  this  regard  short  of  re-estimating  C20 
with  a  consistent  technique.  If  this  is  done,  the  inclusion  of  the  zero  frequency  term 
in  Equation  4.331-1  should  be  avoided,  because  k2  is  not  the  appropriate  Love 
number  to  use  for  such  a  term. 

The  zero  frequency  change  in  C2q  can  be  removed  by  computing  AC20  as 

ACjo  =  AC20(Equation  4.331-1)  -  (AC20)  ,  (4.332-1) 

where 

<AC20)  =  A0HQk2 

-(4.4228  x  Kr8)(-0.31455)/t2 
=  -1.39119  x  KT8Jt2. 

Using  k2  =  0.30  then 

<AC20)  =  -4. 1736  x  10~9,  (4.332-2) 

or 

(AJ2)  =  -  (AC20)      =  9. 3324  x  10~9.  (4.332-3) 

The  decision  to  remove  or  not  to  remove  the  mean  from  the  corrections  depends 
on  whether  the  adopted  C20  does  or  does  not  already  contain  it  and  on  whether  k2  is 
a  potential  "solve  for"  parameter.  If  k2  is  to  be  estimated  then  it  must  not  multiply 
the  zero  frequency  term  in  the  correction.  In  the  most  recent  data  reductions  leading 
to  GEM-T1,  the  total  tide  correction  was  applied.  If  we  assume  the  more  recent 
data  has  most  of  the  weight  in  the  determination  of  C20  then  we  conclude  that  the 
permanent  deformation  is  not  included  in  the  GEM-T1  value  of  C2Q.  Hence,  if  k2  is 
to  be  estimated,  first  (AC2o)  must  be  added  to  C20  and  then  AC20  should  be  used 
in  place  of  C20  of  Equation  4.331-1.  The  k2  used  for  restoring  the  permanent  tide 
should  match  what  was  used  in  deriving  the  adopted  value  of  C2o- 

The  GEM-T1  value  of  C20  is  -484. 16499  x  10  6  and  does  not  include  the 
permanent  deformation.  The  tidal  corrections  employed  in  the  computations  leading 
to  GEM-Tl  were  equivalent  to  Equation  4.331  1  with  k2  =  0.30.  Let  C2o  denote 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  237 

the  coefficient  that  includes  the  zero-frequency  term;  then  the  GEM-Tl  values  of 
-q    with  the  permanent  tide  restored  are 

C*2n{GEM  -T\)  =  -484. 16499  x  10~6  -  (1. 391 19  x  10"8)  x  0. 30.  (4.332^4) 
C*m(GEM  -71)  a  -484. 169025  x  10~6.  (4.332-5) 

These  values  for  C*2fj  are  recommended  for  use  with  the  respective  gravity  field  and 
should  be  added  to  the  periodic  tidal  correction  given  as  AC2q  in  Equation  4.332  1 
to  get  the  total  time-dependent  value  of  C2o- 

4.333  Solid  Tide  Effect  on  Station  Coordinates  The  variations  of  station  coordi- 
nates caused  by  solid  Earth  tides  predicted  using  Wahr's  theory  are  also  most 
efficiently  implemented  using  a  two-step  procedure.  Only  the  second  degree  tides 
are  necessary  to  retain  0.01  m  precision.  Also  terms  proportional  to  y,  h+,  h—,  z,  /+, 
u'+,  and  w—  are  ignored.  The  first  step  uses  frequency-independent  Love  and  Shida 
numbers  and  a  computation  of  the  tidal  potential  in  the  time  domain.  A  convenient 
formulation  of  the  displacement  is  given  in  the  documentation  for  the  GEODYN 
program  (Martin  et  ai,  1976,  p.  5.5-1)  .  The  vector  displacement  of  the  station  due 
to  tidal  deformation  for  step  1  can  be  computed  from 


where 


GMjr4 
GMRj 


[3/2(Rj  ■  r)]R;  + 


i  hy       ,  \    _        3  hi 


(4.333-1) 


GMj  =  gravitational  parameter  for  the  Moon  (j  -  2)  or  the  Sun  (/  =  3); 
GM  =  =  gravitational  parameter  for  the  Earth; 

R/,  Rj  =  unit  vector  from  the  geocenter  to  Moon  or  Sun  and  the  magnitude  of 
that  vector; 

r,  r  =  unit  vector  from  the  geocenter  to  the  station  and  the  magnitude  of  that 
vector; 

h2  =  nominal  second-degree  Love  number; 
l2  =  nominal  Shida  number. 

If  nominal  values  for  h2  and  l2  of  0.6090  and  0.0852,  respectively,  are  used  with 
a  cutoff  of  0.005  m  of  radial  displacement,  only  one  term  needs  to  be  corrected  in 
step  2.  This  is  the  K\  frequency  where  h  from  Wahr's  theory  is  0.5203,  Only  the 
radial  displacement  needs  to  be  corrected  and  to  sufficient  accuracy  this  can  be 
implemented  as  a  periodic  change  in  station  height  given  by 


6hSTA  =  ShKl  HK,  {  -  \/  ^-  ]  3  sin  <f>  cos  <A  sin(©^,  +  A),  (4.333-2) 


238  EXPLANATORY  SUPPLEMENT 

where 

%i  (Wahr)  -/i2  (Nominal)  =  -0.0887; 

f/^  —  amplitude  of  K\  term  (165.555)  in  the  harmonic  expansion  of  the  tide 
generating  potential  =  0.  36878  m; 

cf>  =  geocentric  latitude  of  station; 

A  =  east  longitude  of  station; 
©Ki  =  Ki  tide  argument  =  t  +  s  =  Qg  +  n, 

or,  simplifying, 

ShsTA  =  -0. 0253  sin  <$>  cos  <f>  sin(6^  +  A).  (4.333-3) 


The  effect  is  maximum  at  </>  =  45°  where  the  amplitude  is  0.013  m. 

There  is  also  a  zero- frequency  station  displacement  that  may  or  may  not  be 
included  in  the  nominal  station  coordinates.  The  mean  correction  could  be  removed 
analogously  to  the  discussion  above.  When  baselines  or  coordinates  are  compared  at 
the  few-cm  level,  care  must  be  taken  that  the  correction  was  handled  consistently. 
It  is  essential  that  published  station  coordinates  identify  how  the  zero-frequency 
contribution  was  included. 

If  nominal  Love  and  Shida  numbers  of  0.6090  and  0.0852,  respectively,  are  used 
with  Equation  4.333-1,  the  permanent  deformation  introduced  is 

Ar  r  =  i/— (0.6090)( -0.31455)  (  -sin2^-  -  J  (4.333^) 
V  47r  \2  2  J 

-0. 12083  (  I  sin2  4>  ~  I:  )  m  (4.333-5) 


2       "  2 


in  the  radial  direction,  and 


Ar '  eP  =  \/^-(°-  0852)(-0. 3 1455)3  cos  <p  sin  0 

V  47T 

=  -0. 0507 1  cos  4>  sin  4>  m  (4.333-6) 


in  the  north  direction. 


4.334  Rotational  Deformation  Due  to  Polar  Motion  The  variation  of  station  coor- 
dinates caused  by  the  polar  tide  should  be  taken  into  account.  Let  us  choose  x,  f, 
and  z  as  a  terrestrial  system  of  reference.  The  z-axis  is  oriented  along  the  Earth's 
mean  rotation  axis,  the  x-axis  is  in  the  direction  of  the  adopted  origin  of  longitude, 
and  the  y-axis  is  oriented  along  the  90°  E  meridian. 

The  centrifugal  potential  caused  by  the  Earth's  rotation  is 


V  =  1  /2[r2|0|2  -  (r-  SI)2], 


(4.334-1) 


4  /  -TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  239 

kere  ^  =  Q{m\X  +  m2y  +  {\+m-i)z).  H  is  the  mean  angular  velocity  of  rotation  of  the 
Earth;  mt  are  small  dimensionless  parameters,  mi,  mj  describing  polar  motion,  and 
0^  describing  variation  in  the  rotation  rate;  r  is  the  radial  distance  to  the  station. 

Neglecting  the  variations  in  m-s  that  induce  displacements  that  are  below  the 
mm  level,  the  m\  and  m2  terms  give  a  first-order  perturbation  in  the  potential  V 
(Wahr,  1985) 

AV(r,  9,  A)  =  —  sin  20(^1  cos  A  +  m2  sin  A),  (4,334-2) 

where  0  is  the  colatitude,  and  A  is  the  eastward  longitude. 

Let  us  define  the  radial  displacement  Sr,  the  horizontal  displacements  S®  and 
5A  positive  upward,  south,  and  east,  respectively,  in  a  horizon  system  at  the  station 
due  to  AV  using  the  formulation  of  tidal  Love  numbers  (Munk  and  MacDonald, 
1960,  pp.  24-25). 

AV 

Sr  -  h— ,  (4.334-3) 
g 

Se  =  --d&AV,  (4.334^) 
g 

Sx  =  -^-r8x^V,  (4.334-5) 
g  sin  B 

where  g  is  the  gravitational  acceleration  at  the  Earth's  surface,  and  h,  I  are  the 
second-order  body  tide  displacement  Love  numbers. 

In  general,  these  computed  displacements  have  a  nonzero  average  over  any 
given  timespan  because  mi  and  m%,  used  to  find  AV,  have  a  nonzero  average.  Con- 
sequently, the  use  of  these  results  will  lead  to  a  change  in  the  estimated  mean 
station  coordinates.  When  mean  coordinates  produced  by  different  users  are  com- 
pared at  the  centimeter  level,  it  is  important  to  ensure  that  this  effect  has  been 
handled  consistently.  It  is  recommended  that  mi  and  m2  used  in  Equation  4.334-2 
be  replaced  by  parameters  defined  to  be  zero  for  the  terrestrial  reference  frame 
(ITRF)  discussed  in  the  previous  section. 

Thus,  define 


xp  =  m]-x,  (4.334-6) 
yP=-m2-y,  (4.334-7) 


where  x  and  y  are  the  values  of  mi  and  -m2  for  the  ITRF.  Then,  using  h  =  0. 6, 
'  =  0.085,  and  r  =  a  =  6.4  x  106m, 


240 


EXPLANATORY  SUPPLEMENT 


Sr  -  -32  sin  2&(xp  cos  A  -  yp  sin  A)  mm,  (4.334-8) 
Se  =  -9  cos  2Q(xp  cos  A  -  yp  sin  A)  mm,  (4.334_9) 
Sx  -  9  cos  Q(xp  sin  A  +  yp  cos  A)  mm.  (4,334-10) 

for  xp  and  yp  in  seconds  of  arc. 

Taking  into  account  that  xp  and  yp  vary,  at  most.  0.8  arcsec,  the  maximum  radial 
displacement  is  approximately  25  mm,  and  the  maximum  horizontal  displacement 
is  about  7  mm. 

If  X,  Y,  and  Z  are  cartesian  coordinates  of  a  station  in  a  right-hand  equatorial 
coordinate  system,  we  have  the  displacements  of  coordinates 


[dX,  dY,  dZ\T  =  RT[Se,Sx,Sr]T,  (4.334-1 1) 


where 


R 


cos  (-)  cos  A    cos  6  sin  A    -  sin  0 

-  sin  A         cos  A  0 
sin  0  cos  A    sin  9  sin  A     cos  0 


(4.334-12) 


Equation  4.334  10  can  be  used  for  determination  of  the  corrections  to  station 
coordinates  due  to  polar  tide. 

The  deformation  caused  by  the  polar  tide  also  leads  to  time-dependent  pertur- 
bations in  the  C2\  and  S2]  geopotential  coefficients.  The  change  in  the  external  po- 
tential caused  by  this  deformation  is  kAV,  where  AV  is  given  by  Equation  4.334-2, 
and  k  is  the  degree-2  potential  Love  number.  Using  k  =  0. 30  gives 

C2]  =  -1.3  x  W-g(xp),  (4.334-13) 
§21  =-1.3  X  lO-g(-yp),  (4.334-14) 

where  xp  and  yp  are  in  seconds  of  arc  and  are  used  instead  of  m\  and  -m2  so  that 
no  mean  is  introduced  into  C2\  and  S2\  when  making  this  correction. 

4.34   Ocean  Tide  Model 

The  dynamical  effect  of  ocean  tides  is  most  easily  implemented  as  periodic  variations 
in  the  normalized  geopotential  coefficients.  The  variations  can  be  written  as  follows 
(Eanes  et  ai,  1983): 

AC,„„  -  iASnm  =  FfUu  £  £<f£-  T  iSLy*' ,  (4.34- 1 ) 

s{n,m)  + 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  241 


where 


AirGpw 


nm  ' 

8 


(n  +m)\ 


(rt-m)!(2«+l)(2-5om) 


1  2 


l  +k 


277T<  (434-2> 


where 

8  =  GEIa2  =  9.798261ms-2; 

G  -  the  universal  gravitational  constant  =  6.  673  X  10_n  m  kg~'  s-2; 
pw  =  density  of  seawater  =  1025  kgm-3; 

k'n  =  load  deformation  coefficients  (k'2  =  -0.  3075,  k'3  =  -0. 1954,  k'4  =  -0. 132, 
k'5  =  -0. 1032,  k'h  =  -0.0892); 
C*  ,  5t„  =  ocean-tide  coefficients  in  meters  for  the  tide  constituent  s  (see  Ta- 
ble  4.34.1); 

Ss  =  argument  of  the  tide  constituent  s  as  defined  in  the  solid  tide  model  (see 
previous  subsection). 

The  summation,  ,  implies  addition  of  the  expression  using  the  top  signs 
(the  prograde  waves  C*snm  and  S$„m)  to  that  using  the  bottom  signs  (the  retrograde 
waves  C~m  and  S~,„).  The  ocean-tide  coefficients  C%„m  and  S$nm  as  used  here  are 
related  to  the  Schwiderski  (1983)  ocean-tide  amplitude  and  phase  by 

Clm  -  /S*m  =  WC7n„,<,''(f""*'+x'\  (4.34-3) 

snm         sunt  snni  1  >  ' 

where 

Cjnm  =  ocean-tide  amplitude  for  constituent  s  using  the  Schwiderski  notation; 
e^,  =  ocean-tide  phase  for  constituent  s; 

(0      "I     Semidiurnal,  and  long  period 
7r  /  2     >    K\ ;  (or  in  general  for  constituents  with  Hs  >  0), 
— 7r  12  )     0\,  P\,  Q\  \  (or  in  general  for  constituents  with  Hs  <  0). 

For  clarity.  Equation  4.34-1  is  rewritten  in  two  forms  below: 


or 


or 


AC„m  =  Fnm  Y,  [(d.  +  C-J  cos  0,  +  CSS*  +  S-J  sin  ©.,],  (4.34-4) 
ACnm  =  Fnm  Y  [$L  sin(0J  +  e+mm  +  Xs)  +  C~m  sin(©1  +  e;„„,  +  Xs)l  (4.34-5) 

i(«,m) 

A5nffl  =  Fm„  [CSLi  +  S»„J  co*  0.  -  (C,  +  C"  „)  sin  &„},  (4.34-6) 
AS,™  =  Fnm  Y  [Qm  cos(0.t  +  e^,  +  Xs) 

s(n,m) 

+  C~m  cos(0J  +  e-,„  +  x,)l  (4-34-7) 


242 


EXPLANATORY  SUPPLEMENT 


Table  4.34.1 

Ocean  Tide  Coefficients  from  the  Schwiderski  Model 


Argument 

n 

m 

- 

^snm 

^snm 

Number 

(cm) 

(dea) 

vucy/ 

(cm) 

(cm) 

057. 555 

Ssa 

2 

0 

.6215 

221.672 

-.8264 

.9284 

057. 555 

Ssa 

3 

0 

.0311 

1.735 

.0019 

.0621 

057. 555 

Ssa 

4 

0 

.1624 

92.674 

.3244 

-.0152 

057. 555 

Ssa 

5 

0 

.2628 

251.737 

-.4991 

-.1647 

057. 555 

Ssa 

6 

0 

.4363 

145.744 

.4912 

-.7213 

065. 455 

Mm 

2 

0 

.5313 

256.900 

-1.0428 

-.2046 

065. 455 

Mm 

3 

0 

.0317 

94.298 

.0632 

-.0047 

065. 455 

Mm 

4 

0 

.0998 

69.054 

.1863 

.0713 

065. 455 

Mm 

5 

0 

.2279 

292.291 

.4218 

.1729 

IVlm 

et 

.\JOU\J 

ftft? 

nRd7 

mid 

075. 555 

Mf 

2 

0 

.8525 

251.956 

-1.6211 

-.5281 

075. 555 

Mf 

3 

0 

.0951 

148.236 

.1001 

-.1617 

075. 555 

Mj 

4 

0 

.2984 

102.723 

.5822 

-.1315 

075.555 

Mf 

5 

0 

.2960 

223.167 

-.4050 

-.4318 

075.555 

M} 

6 

0 

.0880 

107.916 

.1675 

-.0542 

The  summation  over  s(n,  m)  should  include  all  constituents  for  which  Schwiderski 
has  computed  a  model.  Except  for  cases  of  near  resonance,  the  retrograde  terms 
do  not  produce  long-period  (>  1  day)  orbit  perturbations  for  the  diurnal  and  semi- 
diurnal tides.  The  root  mean  square  of  the  along-track  perturbations  on  LAGEOS 
due  to  the  combination  of  all  of  the  retrograde  waves  is  less  than  ±  5  cm. 

For  computing  inclination  and  node  perturbations,  only  the  even-degree  terms 
are  required,  but  for  the  eccentricity  and  periapsis  the  odd-degree  terms  are  not 
negligible.  Long-period  perturbations  are  only  produced  when  the  degree  {«)  is 
greater  than  1  and  the  order  (m)  is  0  for  long-period  tides,  1  for  diurnal  tides,  and  2 
for  semidiurnal  tides.  Finally,  the  ocean-tide  amplitudes  and  their  effect  on  satellite 
orbits  decrease  with  increasing  degree,  so  truncation  above  degree  6  is  justified  for 
LAGEOS. 

Thus,  for  the  diurnal  tides  {Q\ ,  0\ ,  P\ ,  K\ )  only  the  n  =  2,  3,  4,  5,  6  and  m  =  1 
terms  need  be  computed.  For  the  semidiurnal  tides  (N2,  M2%  S2l  K2)  only  n  =  2,  3, 
4,  5,  6  and  m  —  1  terms  need  be  computed.  For  the  long-period  tides  (Ssa,  Mm,  Mf) 
only  n  =  2,  3,  4,  5,  6  and  m  -  0  terms  need  be  computed.  Table  4.34.1  gives  the 
values  required  for  each  of  the  constituents  for  which  Schwiderski  has  computed 
a  model.  Note  that  the  units  in  Table  4.34.1  are  centimeters  and  hence  must  be 
scaled  to  meters  for  use  with  the  constants  given  with  Equation  4.34-1. 


Table  4.34.1,  continued 

Ocean  Tide  Coefficients  from  the  Schwiderski  Model 


Lfgu  merit 

n 

m 

6snm 

esnm 

Number 

(cm) 

(deg) 

(cm) 

(cm) 



135. 655 

O1 

2 

1 

.5373 

313.735 

-.3715 

-.3882 

135.655 

Q, 

3 

1 

.3136 

107.346 

,0935 

.2994 

135.655 

Q1 

4 

1 

.2930 

288.992 

-.0953 

-.2770 

135.655 

Oi 

5 

1 

.2209 

112.383 

.0841 

.2042 

135.655 

Oi 

6 

1 

.0396 

287.824 

-.0121 

-.0377 

145.555 

0^ 

2 

1 

2.4186 

313.716 

-1.6715 

-1.7481 

145.555 

Oi 

3 

1 

1.3161 

83.599 

-.1467 

1 .3079 

145.555 

o, 

4 

1 

1 .4301 

276.282 

.1565 

-1.4215 

145.555 

5 

1 

.9505 

109.128 

.3115 

.8980 

145.555 

Oi 

6 

1 

.1870 

282.623 

-.0409 

-.1825 

163.555 

Pi 

2 

1 

.9020 

313.912 

-.6256 

-.6498 

163.555 

Pi 

3 

1 

.2976 

39.958 

-.2281 

.1911 

163.555 

Pi 

4 

1 

.6346 

258.31 1 

.1286 

-.6215 

163.555 

Pi 

5 

1 

.4130 

104.438 

.1030 

.4000 

163.555 

Pi 

6 

.0583 

276.591 

-.0067 

-.0579 

165.555 

*1 

2 

1 

2.8158 

315.113 

1.9950 

1 .9872 

165.555 

*1 

3 

1 

.8925 

33,752 

.7421 

-.4959 

165. 555 

Ki 

4 

1 

1.9121 

254.229 

.5197 

1.8401 

165.555 

*1 

5 

1 

1.2111 

104.672 

-.3068 

-1.1716 

165.  555 

K| 

6 

1 

.1645 

281 .867 

.0338 

.1610 

245.655 

N2 

2 

2 

.6516 

321 .788 

-.4030 

.5120 

245. 655 

Nz 

3 

2 

.1084 

171 .923 

.0152 

-.1074 

245, 655 

N2 

4 

2 

.2137 

141.779 

.1322 

-.1679 

245. 655 

W2 

5 

2 

.0836 

5.034 

.0073 

.0832 

245. 655 

N2 

6 

2 

.0674 

346.544 

-.0157 

.0656 

255. 555 

Mr, 

2 

2 

2.9551 

310.553 

-2.2453 

1.9213 

255. 555 

M2 

3 

2 

.3610 

168.623 

.0712 

-.3539 

255. 555 

M2 

4 

2 

1.0066 

124.755 

.8270 

-.5738 

255. 555 

M2 

5 

2 

.2751 

356.561 

-.0165 

.2746 

255. 555 

M2 

6 

2 

.4130 

329.056 

-.2124 

.3542 

273. 555 

Sz 

2 

2 

.9291 

314.011 

-.6682 

.6456 

273. 555 

S2 

3 

2 

.2633 

201.968 

-.0985 

-.2442 

273. 555 

S2 

4 

2 

.3716 

103.027 

.3621 

-.0838 

273. 555 

Sa 

5 

2 

.1365 

3.772 

.0090 

.1362 

273. 555 

S2 

6 

2 

.1726 

280.381 

-.1698 

.0311 

275. 555 

K2 

2 

2 

.2593 

315.069 

-.1832 

.1836 

275. 555 

K2 

3 

2 

.0943 

195,007 

-.0244 

-.0911 

275. 555 

K2 

4 

2 

.1059 

103.521 

.1029 

-.0247 

275.555 

K2 

5 

2 

.0382 

.411 

.0003 

.0382 

275.555 

Kz 

6 

2 

.0467 

281.357 

-.0458 

.0092 

(1)  The  Doodson  variable  multipliers  (n)  are  coded  into  the  argument  number  (A)  after  Doodson  (1921)  as 

A  =  n,  (na  +  SKng  +  5).  (n4  +  5)(rt5  +  5)(n6  +  5). 

(2)  For  the  long-period  tides  (m  =  0),  the  value  oi  C£nm  used  to  compute  C*nm  and  Sjnm  was  twice  that 

shown  to  account  for  the  combined  effect  of  the  retrograde  and  prograde  waves. 

(3)  The  spherical  harmonic  decomposition  of  Schwiderski's  models  was  computed  by  C.  Goad  of  Ohio 

State  University. 


EXPLANATORY  SUPPLEMENT 

The  (n  =  2,m  =  2)  term  for  the  S2  argument  can  be  modified  to  account  for  the 
atmospheric  tide  using  the  results  of  Chapman  and  Lindzen  (1970).  The  modified 
values  to  be  used  instead  of  those  in  Table  4.34.1  are 

Ct,  =  -0.537  cm,  (4.34-8) 
S|  =0.321  cm.  (4.34^9) 

For  the  most  precise  applications,  more  than  the  eleven  terms  listed  in  Table  4.34.1 
need  to  be  modeled.  This  can  be  accomplished  by  assuming  that  the  ocean  tide 
admittance  varies  smoothly  with  frequency  and  by  using  the  Schwiderski  values  as 
a  guide  to  the  interpolation  to  other  frequencies. 


4.35   Site  Displacement  Due  to  Ocean  and  Atmospheric  Loading 

4.351    Ocean  Loading     In  the  past  decade,  displacements  due  to  ocean  loading  have 
been  computed  by  several  authors  (Goad,  1980;  Agnew,  1983;  Scherneck,  1983;  Pa- 
giatakis  et  al,  1984;  Sato  and  Hanada,  1985),  most  of  them  using  methods  similar 
to  that  described  by  Farrell  (1972)  and  based  on  global  representations  of  the  ocean 
tides  like  those  by  Schwiderski  (1980). 

In  all  these  models,  the  locally  referenced  displacement  vector  E  in  the  vertical 
(radial),  N-S  and  E-W  local  coordinate  system  at  time  t  can  be  computed  as  a 
sum  of  the  contributions  of  n  individual  ocean  tides 

a    (  A\  cos(wff  +  4>i  -  6rj) 
E(r)  =  ]>N  Af  cos(w,f  +  ^-(5f)  (4.351-1) 
«  {  Afwcos(Lj{t  +  4>i-Sf-w) 

where  is  the  frequency  of  the  tidal  constituents  and  $t  the  corresponding  astro- 
nomical argument.  The  amplitudes  A\,  Af ,  Afw,  and  the  Greenwich  phase  lags  tf , 
5fs,  6fw  of  each  tidal  component  are  determined  by  the  particular  model  assumed 
for  the  deformation  of  the  Earth. 

The  site  displacements  resulting  from  the  ocean  tides  have  been  compiled  by 
C.  Goad.  Tidal  loading  radial  (height)  displacement  amplitude  and  phase  values  for 
laser  and  VLBI  station  locations  have  been  computed  for  the M2,  S2,  K2,N2,  Ot,Ku 
PuQu  Mf,  Mm,  and  Sm  ocean  tides  using  models  generated  by  Schwiderski  (1978). 
The  technique  of  Goad  (1980)  that  uses  integrated  G  reen's  functions  was  employed. 
The  load-deformation  coefficients  used  in  generating  the  Green's  function  integrals 
were  taken  from  Farrell  (1972). 

Table  4.351.1  gives  the  amplitude  and  phase  values  for  the  eleven  main  tides  at 
the  selected  stations.  The  phase  convention  of  Schwiderski  has  been  preserved.  His 
phases  for  the  diurnal  tides  differ  by  ±  90°  from  the  standard  Doodson  definition. 


Table  4.351.1 

Displacement  Due  to  Ocean  Loading  (cm  in  amplitude  and  degree  in  phase) 


< 
I 
a 

£L 

s 

< 

to 
< 

X 

a. 


m  ^  tfi  CO  o  ^-  CO  CO  CM  CD  Is  OJ  q  Ol  N  cq  p  CO  -3;  m  ra  O)  O)  t-  cm  cq  CO  en  05  oi  ^ 

r~+  c\i  c\i  c\i  co  cci  K  ^  cm  d  ri  d  ri  n  cy      ri  c\  cd  co  cd  't      t-  c\i  W  ^t-'-^t* 

w  o  Q  o  tfi  o>      cm  cm  co  a>a>  co^i^  s  N  s  s  s  NKr^r^r^  r^^Nr^r^  n  s  s  ?i 

1  7  T  T  1  T  T  T  *" 

"itT-i-.--^-  tfl  it  CO  t-  CM  CM  CO  CO  LO          IC5  CO  O  CO  IO  CO  CO  (O  S  CO  CO  K>  S  N  N  N  (o  «j 

ppppp  ppp-r-p  ppppp  ppppp  ppppp  opppp  oppo 

d      r  co  c\{  cm  co  ^  to  co  cm  cq  oq  p  cm  q  s  co  Tf  q  r-  ^  s  10  q  n  cs  q  co  n  coco^co 

co  cd  ci  n  d  oi  ^  co  d  n  o>  cd  a>  to  cri  K)  s  ^  d  n  cd  oi  K  cd  K  cd^r^T-^T^  ^r^J^rn 

c\i  cs  CD  co  10  u)  n  co  co  m  *r  cm      o  co  n  m  rt  id  ^toooco  oocccdtj  ^  ^  n  s 

f        i         ll  ^    ^  "  T-T-rrr^rrrrr^rr-T-r 

CO  CM  CM  CM  CM  CM  t-  O  CM  t-  t-  i-  i-  i-  t-  t-t-t-t-t-  r  r  fe^f  :E  i-t-^-^t-  t-  t-  -i- 

ooppp  ppppp  ppppp  ppppp  ppppp  ppppp  a  o  o  o 


CO 
X 


cm  co  co  cm  co  to  r~  cq  cq       10  n  q  q  ^  s  n  10  q  ^  cm  iq  cm  co       t~  ^  tj-  cm  cm  cm  cm 


^  lo  cri  co  o  o      o  -<a-       co  ro  ^-  co  n  co  o  o  ca  co 

CM  CM  CM  *-    t-  i-  CM  IT  CO         CO     icDt-    r  O  t-  CO  O 

III  ^  T      T      IT    ITT  IT 


CO  O)  N  CO 
0}  CD  CD  CO 
I 


C5  ^  O)  S  r-  T-^-cd™ 
CO  CO  03        CO    CO  CO  CC  CO 

I  I  I  I  I   I  I  I  I 


S 


qpppp   ppppa   qpqpp  qppqp  qooo 


10 

< 

X 

Cl 

< 

eg 
< 

CL 


^t^-o^N  r>  q  o)  q  q  cq  to  ifl  to  q 

^3  CO  C(j  CO  t-  W  C\i  Cfi  O  S  ^  T-^  K  Ifl 
O^-^-^Tj       I  PI  i-    T-  t   C\|  r  r 


!D  i-  S    7-  N  CO  CO  (O 

in*  co  iii   k  oi  cd  as  Tt1 


to  in  i-   i-  i-  eg  oj 

^'  cti  cd   od  cd  cd  cd 

i-  t-  -r*    i-   i-  CM  CM 


in  ifl  m-  n  n 
ooooo 


O)  CM  CO  CJ  CO    CO  CM  CM  CM  W    CM  W  CO  rf  ^  CM  CM 


CO  CO        CO  SD  O  i-  h- 

in'coco^V  ^ion 

I    to  CD  CD  CO  CO  S  S 

1    7  7  7  7 


CO  CO  CO  O  N    LT)  N  OJ  CM  CD    OJ  O  LO  N  CM    CO  *>~  i-    i-  t-  tJ-  LO 


pi  CT>  i-  CO  co  n  CO  W  CM  CO  1-  CO 
COO          O  Tf  O  CO    CO  CO  N  CO  N 


CD  CM  CO  DO 
-     CO   GO  CO  CD 

I      I      I  I 


CM  CO  (O  CO  r-  T~ 
CO  CO  CO  h-  " 

I      I      I  I 


I  I 


N  CO  m  CO  ^    CO  ^  CM        N    CM  S  O)  N  O  COtOLTJLOCV 

ooooo   ooooo   o  o  o  o  OOOO-i- 


co    co  oo  co  co 

o  o  o  o  o  o 


< 

X 
CL 

CL 

< 
< 

X 


Q_ 

< 

CO 

< 

X 


rjjrtrj-iLOCM  CM  N  CD  t  CO  N  CO  ID  LO  O)  CO  CD  fl-  CM1  N  t-  CO  O)  CO  t-  O)  t-  CO  lO  W  CM  CM  CO  CO 

CO  05  oi  ai  CO  CO  CO  CO  CD  CO  CD  CO  d  CO  CO  d  cci  r-1  cci  d  W  CM  CM  N  CM  CO  N  t-  t;  -p-  <r-  CO  CO 

Lfi  CO  CO  CD     I  I  i-CO  COCO't^CO  tt^CO^CO  ■^^^'m'CO  ftTfn^'vt  ^^^t^- 

I    I    I    I  1 

O  N  S  N  CM  CM  ^  O  tO  LO  m  CO  CO  CM  CO  ^  O  CO  f-  Ifl  CO  i-  i-  O  t-  t-  CO  CD  CO  CO  CO  r-  r- 

t-ooot-  1-;  t-  -r-  q  t-  t-  t-_  t-  cm  cm  CM  co  to  co  to  co  n  co  to  to  to  ^  n  to  q  co  co  co 

N  CO  CO  Cp  CM  CM  Is*  Cp  CO  CM  O  CO  CD  CO  i—  CO  CO  U]  CM  Lfl  N  CO  tf)  N  OCOOJ^q  O)  O)  q  S 

CO  CD  CO  CD  Ifl  LO  -i-  CO  CD  oi  r-  S  CO  CO  6  N  If)  N  C\i  (D  CO !  CD  LD  CO  ^  lO ■  ^'  ffl  N  N  ^  *i  EE'  ES 

CO  O  O  O  CD  CO  CO  ^   CO  t-  CO  i-  CO  N  CM  CO  CO  CD  CO  tO  lO  lO  lO  CO  LO  lO  CO  LO   LT)  LO  LO  CO  CO 

i  i  i  i  i  i  i  i  i      f  i T  i  i  I  I  I  i  i  r  i  i  i 

o>  a>  co  -i—  i-  <d  ■•—      m  cm  co  co  n  co  to  co  n  co  en  co  cm  cm  cm  fl-  «  cm  to  n  co  cooooo 

CO  CM   C\J   CM  CM  CM  —  t-t-O  O  O  O  O  —  O  —  ■>-■>-  ■>-  ^  -r-  CM  t-  r  CJ  r  r  —  —  ^  T 


if)  rt  O  S  co 


I  I  I 


CO   CO  CD  T- 

Tt"  I*  tO 

i      i      1  r\i 


CM  CO  O)  CO  CO 


CO  CO  CO 
CM  CO 


p  CO  N  t-; 
CO  CO  CO  CO  CO 


CO  CM  CM  CM  CM    CM  CM  CM  CM  CM 


oo  o  co  co  cs 

CO  CO  CO  S  CO 
CM  CM  CM  CM  CM 


o>  O)  *» 


O  CO  CO  CO  CD    CO  CM  O  CM  CM    i-  h-  1^        r-    CO  t-  N  CO  t-    CO  CM  CM  CM  ^-    CM  CM  LO  OJ  CD    ^  fO  CO  CO 
CD  O  O  CM     CM  CM  CM  i-  CO    CO  CO  CO  V   lO     ^   CD  CO  CO  N     CD  q  (D  CO  CO    tO  tp  CO  S  ^    h  N  *  (P 


en 
< 

X 

a 
a 

< 

CO 

< 

X 

Q_ 

CL 
< 

< 
X 
CL 

CL 


CO 

LO 

I 


O  O  TT 
O  CD  LO 


^  CD  CO  CM  LO 
LO  r—         LO  CM 

II  ^  « 


ifl  O  lO  (D  i- 

a>  od  o 

CO    CO     Tt    TLj  Tt 


lO  lO  f  N 

K  t-  oi  cm'  ai 
^  ^-  CO  tl"  co 


O  q  co  q  cm 
t—  co  co  co  cd 


r-  co  co  cj>  cb  en  co  co 
co  d  co  cm  t-  t:  ril  J 


Tj-Tr^j-Ttco  ^<tco^-^r  ^  ^ 


r  t  IO  O  CO  CO  ^3"  CM  CO  -i-  CO  Ol  CO  CM  CO  CM  fl)  CO  CM  i-  N  N  lO  (D  O  to  N  CO  ^  N  ^  r--  q  q 

t^t-'t-'cv^  ^j  o  co  cm  cd  cd  i—  o  oS  cd  cdojco'cnco  oi  crj  s  co  ^'  99  2  ^  3;  S  S  O  2 

i—  £D  CD  CO  LO  LO  N  S  CO  CM  CO  CO  N  CM  CD  CO  Ol  CO  CT)  CO  QO  O  O  O  K  O  O  N  CO  CO  CO  CO  ^  T 

1  1  1  1  7  7  7  7  77  77  77  1  7    7  7  7  1  7  7  1  1  1  1  1  7  T 

n  to  co  m  to  to  tj-  o  "d-  m  co^co^Tt-  cm  cd  to  co  n  cm  lo  io  lo  lo  ^  ^  ffl  oj  r-  t~  t:  °  5 

t  m:  fl:  C\l  CM  CM.  CM  CM  r-  r;  t;  t;  CM  t-;    -r^   CM    —   CM  ftl  r ■  i-  t-  CO  p   r;  CO   r;    CM  CM  <M  r;  r 

i-  ^  tj-  o  co  oi  n  ^  CD  co  to  to  to  co  cm  cm  *f  lo  cm  s  to  "t  co  h-  o  q  q  ■—  q  o  q  q  q  i> 

2  £  co  n  co  cd  cd  oj  io  ai  t-  cri  id  w  n  dcMoi^fLO  cri  co  ^  lo  d  cd  r-  co  n  ^  l>  ^m  ^ 

T  CO  CO  CO  N  N  UD  tfi  CD  CD  i—  CD  <T>  I  LO                      CO  ^  CO  t—  t—  i—  t-     i  't  CM  CM  CM  CM  CO  n 

i  i  i  i  -  y"^rf  i      iiii  I  I  i  I  I  iill  ii 

N  N  S  S  (O  CD  LO  CO  CM  CO  CM  CM  f-  CO  'Cf  CO  CM  CO  r-  CO  CM  CM  CM  p  EHS^S^  ^  r3  rv 

CO  CO  CO  CO  CD  Ol  fl)  (O  CO  O  CM  O  CM  O  CM  CM  CM         CM   lO  CO  CM  CM  CM  N  CM  CM  CO  't   lO  LO  LO  CM  CM 


i  3 

S  -o  5 


CM  CO  ^ 


o 


I  'lg  ° 

w  ir  < 
»  co  I 

5  S  z 


CO 

o 

E  s 

.a  tr 

DC  X 


5  I 


0-    >   >    LL.  > 


CD 
LU  CO 


is 

co  w  ^ 


O    CO    C     4_  ^ 


O   01  o 


_  o 


i>  (fl  o  >■  2  P  a  & 


_  CQ  Q_ 

O  O  O  O  -i  cn 


O    O  +i     o  o 


t-  CM  «  ° 

>  >  ^  01 

5SOO 

j  j  1 1 


Table  4.351.1,  continued 

Displacement  Due  to  Ocean  Loading  (cm  in  amplitude  and  degree  in  phase) 


co 
< 
I 
o. 

0- 

< 

CO 
< 
I 
a. 


00  rv  rv  co  cm  ^  co  to  01  t-  i-  m  05  m  03 


--  i~  CM  ^ 
|v  Iv.  |v  |v  tv 


n  o  ■-  m» 

id  cd  h  cd  Ifl 

co  in  m  cm  cd 


en  CO  CD  co  co 

rv  rv  iv  rv  rv  rv 


O0  00  ^f  CO 

cm  *T  0"i  in 

co  co 


CO  CO  t-  —  CO 


to  n  to  in  (o  o>  ca  to  o  ^ 
d  ^  d  cm'  to  ^  d  in  d  in 

LO  |v  in  t-  CO    (D  CU  O  Tf  N 


t-  1-  a)  oi 

c\i  d  ai  0  <d 
co  cm  o  r-  in 


in  m  o  to  to  to  o 

CO  c\i 

to  CO 

I 


co  en  co  cn  i-omo>o  rv  m 
d  d  cm  c\i       d  d  d  d  ■<*■  r-'  co 

MU?  r  r    N  N  CM    CO  t- 


r>  »-      t-  cm  cm  ,-  ^  cm  o  10  o  n  01  jonnn  15153*0  g-co 

00000  00000  00000  oO'-oo  qoooo  ppppp  p  p 


CO 

< 
X 
0. 

EL 
5 
<£ 

CO 
< 
X 
11 


W  \T  CO  O:  W    CM  CO  CO        CO    CM        CO  to  in    rv  tv  CO  t-;  rv    (0  O  W  (fl  t-    CM  CM  q  rv  CO    Ifl  r 


o  o  rv  co 


CO  CO 

I  I 


to  CO 

I 


CO  CO  CM 
CO  CO  CO 

I  I  I 


o  ■* 


CM  CM  CM  ^  CM    cm  cm  cm  co  to    n  n  n  n  J  OOlCMinCO  O^CVOJIO  COCOCOCOt-  t-  ^ 

OOpOp    OppOO    OOOOO  t-  d        O  r-  T-pppp  ppppp  p  p 

cupT-coco  cn  co  cm  co  cn       co          co  cn  *f  rv  *f  to  co  to  p  q  q  q  <p  *  01  id  q  n 

d  rv'  iv'  d       ^cdcoco'oi  co  tdiriiriiri  to  d  d  d  cm  ino'co^o  S  21  12  SB  ^  ^  £S 

h,-V=t-t-CM         t-  t-  CM  OJ    CM  CM  CM  (M  CM  CO  IV  rv  m  O  (D  in  I&  o  ^  co  c\j  co  co  in  ^1- 

"  T    T "  1  77  1  1 

cd  cd      cm  to  m  01  n  n  co      co  co  cn  m  co  cn  o  cn  o  co  05  n  r-  9  9  r  1:  ?  ^ 

1—  1-  i-  ,-0'-'-'^  —  o  —  q  o  qqqqq  *-  q 


s 

I 

CL 
0. 
< 


< 
I 

CL 
Cl 

< 

in 
< 

CL 

0- 

S 
< 

< 
1 

CL 


CO 
< 
X 


0. 

< 

CO 
< 

CL 


co 
< 

X 

a. 
a. 
< 


*t  CM  lO  CM  CO    CMTftOptD  r-  (v    ^7.  I1*.  fv_  Is. 

S--'*cOffi  co'cM^ap'iri  g  ^  *r'  *r'  P  co^-^-oot- 
uffitoai  loiouin'*  n      j    |  »-  iff  w  jjfl 


co  |v  tv  co  iv 

O  O  CO  r  Cli 

co  to  rv  o  co 


(D  s  in  CM 

CM  CM  in  o 

»»  *-  CM  CO 

I  I  I  I 


in  cm 
o>  CO 

I  I 


cm  cn  —  t-  ^  cm  in  cm  to  co  n  id  s  cm  r-  jnooj  £s!£!S32  2JS 
o  o  *-      o  o  00000  cmocmt-cm  n  o      cm  o  ooppp  op 


Q        CM  CO  CO    t-  *-  CO  i-  t-  CO 

r-^         Cli  CM  r4  CM  CO 

Tj-  ■*  tj-  *■  m  in  ^ 


co  to  T—  s  to  O)  cn  co 
odopoS  tfj  iri  to  t-  iri 

■d"        -«t    CO  CD  O)  !D  r- 


CMcomcOf-  s  co  ^  to  r-  q 

r>  cd  cd  s  'j  t^r^iriLrioS  co  10 

cm  o  co  w  m  ^  m  m  o  i-m 

T  *•  T  *"   I  I    I    I    I  *•  1 


lo  co  co  eg  co  ^-  cm  3-  in  s  01  n  r>  co  <j>  cm  co  ^  o  ui  n  cn  fc  £:  S£  SS  S  S 
^t^Tfcoco  ^  10  10  co  to       •?  9  t  in  «  #  u  n  9  co  -  co  o  o  q  o  q  o  -r-  cm  q 


co  m  to  ^  m  n  q  ifi  in 

05  to  cd  r-  d  co  Lri  in  c\i  iri 

iflinininco  m1*^  1 

I    I    I    I    1  III 


r  CO  CJ>  (S  N 

ic  0  fti  c\i  cd 

CM  1-         1-  j 

Jill 


^  m  in  co  oj 


W  N  N  CD  CO 

in  iri  ^  iri  cd 

CH"  CD  CO  CO 

I  T  I 


CM  CO  t—  CM  O 

■t  ^  ^  W  N 

CO  CO  CO  CO  J! 

Mil 


CO 

I 


in  CO  CO  CO  O  CM  CO  CO  CM  ^  CO  CO  CM  CM  N  H  O  r  r  CO  CO  0)  CO  CO  f  00  CQ  ^  ^  O  fell 
CM  CM  CM  -i-  ^     CM  CM  CM  —   i-    CM         CM  CM  CM     t         If)  CM  CO    if  t-   r  O  1-    0  0^^01     O  T_ 


Ol  CO  Ol  »-  CM 

in  in  co  co 

CM  OJ  CM  CM  CO 


N  CM  CO  Tt  N 
CD  N  N  N  CO 
CM  CM  CM  CO  CO 


cn  t-  cm  cm  m 

If)  ^  Tf 

CO  CO  CO  CO  CO 


O  ■»-  h-  CM  f-    CM  CM  CO  CO  S 


CO  CM  LQ  O  T- 
CO  CO  CM  CO  iO 
O  O  CD  O)  iC 


o 

05 

(0 
CO 

CD 
CO 

to 

CO 
X 

t.03 

1.04 

CD 

CD 

cn 

LO 

orj 

in 
cn 

LO 

cn 

1.05 

CO 
CO 

uo 

CO 

1.05 

to 
to 

1.06 

a> 

CO 

o 

00 

CP 

o 

o 

in 

Is. 

OJ 

t 

** 
( 

CD 

CO 

o 

o> 

cn 

S 

CO 

4 

u 

$ 

CO 

CM 

m 

CO 

■* 

cn 

CO 

'? 

r- 

00 

CO 
cn 

a} 

to 

CM- 

CM 

r- 

n 

to 

CO 

in 

CN 

CM 

o 

CO 
C5 

as 

CD 

CO 

Id 

Ifl 

LO 

CO 
LO 

ro 
tn 

cn 

C\J 
n. 

P 

Ifl 

CD 

10 

LO 

CO 

CM 

CO 

K- 

CO 

00 

in 

m 

*t 

CO 

o 

OS 

gj 

CD 

1 

CM 

N 
1 

CO 

1 

s 

1 

in 
in 

7 

ri 
|v 

1' 

OJ 
LO 
1 

CO 

If] 

1 

o 

cn 

CO 

cn 

1 

CO 
CO 

LO 

o 

s 

CO 

K 

CO 

i 

r; 

d 

CO 

7 

d 

CM 

r- 

n 

to 

CO 

CD 

s 

ft 

m 

ID 

o 

cn 

CM 

CO 

o 

cd      cn  co 

CO  CM  CO  i-  O 


en  to  co  <o  cn 


r-  in  *q- 


N  ^  ^  CO  N 

t-'  s  cci  oi  oi 

CO  CM  CM  *~  CO 

I  I  I  I 

§  S  IS  i§  CO 


CO  CM  tO  CM  CO 

7  i  i 


(O  O  CO  CO  ^ 

d  oj  co  co  to 
CM        CO  CO  CO 


G>  tj-  tj-  tj-  o>  cn  co 

hw    CO  S  O  O  i-;    tJ;  K 


CO 

CD 

rs 

P 

t 

>* 

CO 

CO 

CO 

in 

r- 

OJ 

o. 

OJ 

CO 

CM 

3 

CD 

CD 

7 

1 

7 

i 

1 

1 

OJ 

LO 

CO 

OJ 

a 

cn- 

CO 

ro 

q 

s 

iq 

P 

CO 

CM 

CO 

0) 

CM 

o 

CM 

LO 

in 

CO 

Bi 
i 

o 
m 

1 

d 

LO 

1 

cd 
cn 

1 

CD 

CO 

s 

1 

CO 

81 

o 

OJ 

OJ 

ID 
CM 

CO 

CD 

CD 

CM 

LO 

CD 

in 

CO 

T 

CD 

CD 

ai 

ro 

CO 

•I 

■D 

E5 

CO 

1 

OJ 

1 

OJ 

1 

Oj 

CO 

o 

7 

i 

o 

o 

0) 

CO 

CO 

CO 

S  S  CD    Ol  ^ 


f  5  =5  E  I 
>  m  to  o 
£  2  co  CD  S 


9=  «  I  8  u 


o  >  a- 1 


s  * 


_  ^  to    o  ca  to 
a  I  u.  >  cn 


■S  -  ° 
.Sun. 


i?  O 

nj  =  cj  ro  t_ 
?  C3  iC  >£  CD 


IhiC 


B  H  - 

ill 


crj   co  =  _q  ^ 

g  g  i  |  1 
O  O  S  m  O 


2  3 
23 


TohiP  4  351 .1 ,  continued 

□^placement  Due  to  Ocean  Loading  (cm  in  amplitude  and  degree  in  phase) 


it 

s 

cr? 

L 

n 

D. 

CO 

< 

X 

S 

^~ 

0- 

2 

^ 

< 

X 

o- 

s 

cn 

< 

I 

°- 

Q. 

S 

<c 

CO 

< 

I 

oT 

CL 

0. 

CO 

< 

X 

a. 

CL 

5 

< 

-p 

o 

CL 

CL 

< 
CO 

< 

X 

_ 

CL 

< 

CO 

< 

X 

CL 

CL 

2 

< 

CO 

< 

I 

Cl 

Q. 

< 

0|s«^CO*<3"    CO  CM  ^ 

r-  cd'  in  ai  fi  ^  to  3-  in 
enh-r^enr-  s  co      co  oi 


m  co  o  m  o 


co  o  o)      cs  id  Tf  rj)  in  in  <  s  <m.  q  in 
_ £  *a  _j  in  in  co  if)  cji  t—  cm      t-  m 
N-  cm  co      t-  o       cn      cn  co 


LO  C7l  t-  iD 


i—  CO  OJ  co  to 
i-  q  q  q  q  q 


to  i-  to  m  in 
o  O  o  q  q 


w6HDNO  coommto  Noh-ioo  scq  to  in  «  r^cor^cn^  ^  cm  q  cm  r- 


Lf)    t-  r-    T"   CO     ]"   r    t\|C0  if) 

qqqqq  qqqqq 


co  co  o  co  ^  co  m  cm  o  <o  ffl  r  cm  n  co  qcqcMr^cM  qoi-rtqs  S^^^^ 

■  ^      ■  _-     .■  _         ™<    m  n  m  ^  »         rrt  ^  N     i     t—  h-  1^  GO  CO    CO  Ifl  O  CD  r- 


r^cdcdcMto  oi^tcooico  co 


O  CM  CO 

*-  co  m 

1  1  7 


*  in 
p  °. 


ffiCM*-OJtp  '-T-cocom 
ppppp  ppppp 


.  oinfl9  n  in  4  to  cd  cocnocDO  r-,  cm      p  cn  r^pppcM  pptgin* 

fi  i  |    7     llll77    1  7T  1  i 
55585553555  S^^SSSSpo.  q&?8.;5?555 


CO  CO  CO  »-  f**  "vf  CO  CD 

^  t>j  CO  CM  r-'  J  * 

CO  CO  CM  CO         't  N 

I     I  I  I  I  I 


^th^    CO  CO  cn  O  CD   OJ  't  N  o  o 


CM  CO 

I  [ 


S CO  aj  if)  T-  IN  oj  oi  to  o 
5  O  co    i    r-  Cn  ^-  CO 


fl)  CO  if)  ^  t- 

cm  cd  cm  in 

CO  O  CO  S  CO 


CO  O  CO  -J  i- 

co  *—  o  0"i  c\i 
m  v  1-  i 


§  ^    S 1$  S  li  8. 5i  J?  I|  S  S    5  5  Q  5  %  S, 


cMT-ppp  3P^pp  rAj^cqin.cq  pr^ppp  to  cqp^p  r^^pptn 


-64.2 
-54.1 

-53.6 

174.8 
-54.0 

-48.4 

-58.3 

si 

CO 

-52.3 

cn 
to 

-55.2 

LO 
CO 

126.6 

LO 

iO 

C'J 

OJ 
CO 
I 

oi 
cn 

oj 

in 

1 

d  d 
cn  in 
1  1 

to 
1 

o 

CO 

OJ 

lO 

cd  cd 

CO  CO 

LO 

fv* 
|v 

LO 

CO 

o 

LO 
O 

LO 

o 

I 

cm  m 

P  °. 

L0 
O 

LO 

q 

p 

P 

1  I 
q  q  3 

LO 
OJ 

CO 

o 

CO 

m 

lO 

p 

r- 
p 

to 
q 

go 
o 

L0 

CO 

o- 
to 

Ifl 

CO 

m 

CO 

CM 

o 

s 

CO 

o 

OJ 

CM 

d  to 
no  co 

I  I 

CM 

CO 

in 

CM 

CO 

Clj 

CO 

r*. 

LO 

ro 

to 

CO 

CO 

I 

LO 

m 

s 

CM 

in 

00 

1 

T 

od 

oj 

7 

>Jr 

CO 

d 

CI 

Ifl 

LO 

1 

q 

K 

C\J 

|v 

to 
oi 
1 

O 

rv 

CD 
IV 

a 
Cn 

I 

cn" 

CO 

I 

S5 

I 

en 

CO 

1 

CO 
00 

1 

CM 
OJ 

s 

1 

5 
1 

8 

i 

5 

CO 

CO 
CD 

s 

1 

^0 

1 

i- 

1 

i 

s 

1 

7 

CO 

1 

03 

1 

a) 

cn  t- 

U0 

Ifl 

7 

a 

o 

CM 

LO 

in 

o- 

CO 

cn 

tn 

CO 

cn 

CJ 

s 

CO 
CM 

CO 

CM 

O 

C-J 

<C 
o 

8 

CO 

00 
Oi 

I 

cn 

m  m 

cn 

OJ 

o 

cn 

00 

CO 
CO 

ro 

1 

Ifl 

OJ 

LO 

cn 

CO 

1 

CM 
CO 

OJ 

ro 

LO 

cn 
ED 

q 

CM 

r-. 

CO 
OJ 

cn 

CM 

ro 

m 

OJ 
LO 
CM 

tv 

Tf 

OJ 

OJ 
LO 

o 

CO 

Cd 

d 

m  cn 

o- 
cn 

1 

CM 
CO 

1 

CO 

69 
1 

1 

Si 

Ifl 

LO 

d 
to 

ro 

a 
1 

ro 

1 

7 

7 

a 

CO 

o 

7 

7 

CO 

o 

CO 

o 

co 
p 

7  ' 

in  co 
p  o 

7 

CD 

q 

o 

s 

7 

in 
p 

q 

1 

CD 

I 

CO 
CO 

CD 
in 

o 

P 

1 

to 
CM 

s 

q 

s 

o 

S! 

CO 

OJ 

q 

to 

Si 

co 
IV 

q 

cn 

CO 

£ 

Ol 

o 

-71.8 

CO 
to 

I 

CO 
Is 

In 

I 

cn  co 
d  K 
is.  m 

CM 
0J 
CO 

| 

o 

CM 
CD 
1 

cn 
cm 

ID 
L0 

in 

1 

in 

Lfj 

1 

O 

ID 

| 

CM 
in 
CO 

to 

CD 
CM 

7 

o 
d 

OJ 

CO 

CO 

1 

an 
N. 

ro 

1 

o 

IT 

p 
m 
i 

m 

ro 
qd 

1 

CM 

ai 
in 
1 

CM 

d 

CD 

T 

Ifl 

oj 
to 

to 

4 

co 

OJ 

1 

IN 
|v 
LO 

ecj 
SB 

CO 

in 
cn 

CO 

to 

to 

CO 

d 

cc 

1 

■J 

to 

1 

a 

r- 

s 

7  1 

CO  CO 

p  I- 

N 

o 

cn 

O 

m 

1 

ro 

5 

q 
cn 

OJ 

CO 

7 

o 

LO 

s 

« 

o 

CO 

? 

ro 

q 

CO 

CO 
CM 

CM 

■* 

|v 

p 

CM 

-39.9 

m 

co 

co  to 

CO 

r- 

CO 

O 

o 

OJ 

CM 

CM 

CO 

CD 

CM 
0- 

CO 

ro 
cn 

IO 

q 

CO 

1 

CO 
CD 

7 

CC 
d 

to 

|v 

CC' 

f-' 

to 

I 

CO 

CO 
I 

Cli  cd 

in  co 

1  1 

CO 
CM 

1 

co 
1 

CD 

CO 

1 

3 

i 

cn 

CO 

1 

r- 
o 

CO 
CO 

I 

rv" 
1 

CO 

7 

LO 

cn 

S) 
CM 
1 

5 

I 

1 

o- 

1 

CM 

7 

o 

7 

CO 

7 

7 

L0 

1 

7 

** 

—  V 

CO 

to 

CO 

1- 

CO 

CO 

<« 

a 

CM 

15 

LO 

ia 

m 

9 

CO 

OJ 

s 

-63.9 

LO 

CD 

I 

i 

O  CO 

co 

ID  co 

1  I 

00 
ro 

LO 

if 
1 

m 
o 

CO 

CO 

to 

1 

CO 

S 

Ol 

s 

1 

LO 

9 

CD 
O- 

CO 

CM 
a; 

CD 

CO 
CO 

CO1 

1 

cn 

Ol 
CD 

CM 
^J 
CM 

CO 

1 

is 

LO 

o 

7 

cn 

s 

1 

o 
cc 
CO 

CO 

7 

d 

7 

cn 

lO 

7 

i 

■3 

CO 

CO 

in 

tri 
m 
1 

CO 

>n 
1 

CM 

CM 

in 

o 
in 

CO 

co  in 

CO 
CM 

CO 
0- 

7 

CO 
V 

iO 

cn 
■a- 

CM 

r- 

in 

0J 

O- 

o 

CO 

CO 
LO 

!a 

CO 

3 

cn 

CM 

CM 

co 

q 

3 

CO 

c 

Sj 

i 

m 

CO 

LO 

CO 

C\ 

'OJ 
CO 

as 

CO 

10    r-  _  E 

c  —  -o  S  d  i2ScoiSc  2  tj  r  n  o  coacicp  ir,  oSto  o« 
Ei6i|  IcSlCLO  ZOiilSi  co<cfitON  ILtSOS  20. 


248  EXPLANATORY  SUPPLEMENT 

The  height  displacement,  in  centimeters,  can  be  found  for  a  given  constituent  /'  as 
follows: 

h(i)  =  amp(r)  x  cos(arg((",  t)  -  phase(i)),  (4.351-2) 

where  arg(i,f)  is  the  proper  angular  argument  to  be  used  with  the  Schwiderski 
phases  (a  Fortran  subroutine  for  this  exists  in  the  IERS  Standards  (McCarthy, 
1989,  pp.  40-42)).  The  total  tidal  displacement  is  found  by  summing  over  all  nine 
constituents.  A  negative  h(i)  means  that  the  surface  at  the  predicted  point  has  been 
lowered. 


4.352  Atmospheric  Loading  The  procedure  described  below  is  taken  from  the  pub- 
lication of  Sovers  and  Fanselow  (1987).  A  time- varying  atmospheric  pressure  dis- 
tribution can  induce  crustal  deformation.  Rabbel  and  Schuh  (1986)  estimate  the 
effects  of  atmospheric  loading  on  VLBI  baseline  determinations,  and  conclude  that 
they  may  amount  to  many  millimeters  of  seasonal  variation.  In  contrast,  to  ocean- 
tidal  effects,  analysis  of  the  situation  in  the  atmospheric  case  does  not  benefit  from 
the  presence  of  a  well-understood  periodic  driving  force.  Otherwise,  estimation  of 
atmospheric  loading  via  Green's  function  techniques  is  analogous  to  methods  used 
to  calculate  ocean-loading  effects.  Rabbel  and  Schuh  recommend  a  simplified  form 
of  the  dependence  of  the  vertical  crustal  displacement  on  pressure  distribution.  It 
involves  only  the  instantaneous  pressure  at  the  site  in  question,  and  an  average 
pressure  over  a  circular  region  C  with  a  2000-km  radius  surrounding  the  site.  The 
expression  for  the  vertical  displacement  (mm)  is 

Ar  =  -0.35p~0. 55p.  (4.352- 1 ) 

where  p  is  the  local  pressure  anomaly,  and  p  the  pressure  anomaly  within  the  2000- 
km  circular  region  mentioned  above  (both  quantities  are  in  mbar).  Note  that  the 
reference  point  for  this  displacement  is  the  site  location  at  standard  pressure  (1013 
mbar) . 

An  additional  mechanism  for  characterizing  p  may  be  applied.  The  two-dimensional 
surface  pressure  distribution  surrounding  a  site  is  described  by 

p(x,y)  =  Aq  +  A\x  +  A2y  +  A^x2  +  A^xy  +  Asy2 ,  (4.352-2) 

where  x  and  y  are  the  local  east  and  north  distances  of  the  point  in  question  from 
the  VLBI  site.  The  pressure  anomaly  p  may  be  evaluated  by  the  simple  integration 


=  j I  dxdyp(x,y)  /  J  fdxdfc  (4.352-3) 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  249 

giving 

p=A0  +  (A)+A<,)R1 14,  (4.352-4) 

ffhere/?2  =  (^+/)- 

It  remains  the  task  of  the  data  analyst  to  perform  a  quadratic  fit  to  the  avail- 
able weather  data  to  determine  the  coefficients  A0_s-  Future  advances  in  under- 
standing the  atmosphere-crust  elastic  interaction  can  probably  be  accommodated 
by  adjusting  the  coefficients  in  Equation  4.352  1.  Furthermore,  expansion  of  Equa- 
tion 4.352-1  might  be  required  for  stations  close  to  the  coast. 


4,36   Plate  Motions 

One  of  the  factors  that  can  affect  Earth  rotation  results  is  the  mot  ion  of  the  tectonic 
plates  that  make  up  the  Earth's  surface.  As  the  plates  move,  fixed  coordinates 
for  the  observing  stations  will  become  inconsistent  with  each  other.  The  rates  of 
relative  motions  for  some  regular  observing  sites  are  believed  to  be  5  centimeters 
per  year  or  larger.  The  observations  of  plate  motions  so  far  by  satellite  laser-ranging 
and  Very  Long  Baseline  Interferometry  appear  to  be  roughly  consistent  with  the 
average  rates  over  the  last  few  million  years  derived  from  the  geological  record 
and  other  geophysical  information.  Thus,  in  order  to  reduce  inconsistencies  in  the 
station  coordinates  and  to  make  the  results  from  different  techniques  more  directly 
comparable,  a  model  for  plate  motions  based  on  the  relative  plate  motion  model 
RM-2  of  Minster  and  Jordan  (1978)  is  recommended. 

From  the  RM-2  model,  Minster  and  Jordan  derive  four  different  absolute  plate 
motion  models.  The  two  that  have  been  discussed  most  widely  are  AMO-2,  which  has 
zero  net  rotation  of  the  Earth's  surface,  and  AMl-2,  which  minimizes  the  motion  of 
a  set  of  hot  spots.  Kaula  (1975)  and  others  have  discussed  alternative  geophysical 
constraints  that  can  be  used  in  order  to  investigate  the  plate  motions  with  respect 
to  the  bulk  of  the  mantle.  For  convenience,  when  future  changes  are  made  in  the 
relative-motion  model,  and  to  avoid  dependence  on  the  choice  of  the  hot  spots  to 
be  held  fixed,  the  (AMO-2)  model  is  recommended.  The  cartesian  rotation  vector 
for  each  of  the  major  plates  is  given  in  Table  4.36.1. 

Future  improvements  are  planned  for  future  IERS  Standards  including:  (1) 
replacement  of  RM-2  by  a  new  model,  new  velocities,  and  new  plates— for  example 
with  the  NUVEL-1  model  of  DeMets  et  al.  (1990);  and  (2)  adoption  of  a  vertical- 
motion  model  (post-glacial  rebound).  In  any  case,  the  AMO-2  model  should  be 
used  as  a  default,  for  stations  that  appear  to  follow  reasonably  its  values.  For 
some  stations,  particularly  in  the  vicinity  of  plate  boundaries,  users  may  benefit 
by  estimating  velocities  or  using  specific  values  not  derived  from  AMO-2.  This  is 
also  a  way  to  take  into  account  now  some  nonnegligible  vertical  motions.  Published 
station  coordinates  should  include  the  epoch  associated  with  the  coordinates. 


250 


EXPLANATORY  SUPPLEMENT 


Table  4.36.1 

Cartesian  Rotation  Vector  for  Each  Plate  Using 
Kinematic  Plate  Model  AM0-2  (No  Net  Rotation) 


nx 

Plate  Name 

deg/My 

deg/My 

deg/My 

Pacific 

-0.12276 

0.31163 

-0.65537 

Cocos 

-0.63726 

-1.33142 

0.72556 

Nazca 

-0.09086 

-0.53281 

0.63061 

Caribbean 

-0.02787 

-0.05661 

0.10780 

South  America 

-0.05604 

-0.10672 

-0.08642 

Antarctica 

-0.05286 

-0.09492 

0.21570 

India/Australia 

0.48372 

0.2501 1 

0.43132 

Africa 

0.05660 

-0.19249 

0.24016 

Arabia 

0.27885 

-0.16744 

0.37359 

Eurasia 

-0.03071 

-0.15865 

0.19605 

North  America 

0.03299 

-0.22828 

-0.01427 

4.37   Tidal  Effects  on  UT1 

To  properly  compare  UT1  results  obtained  at  different  epochs,  the  high-frequency 
tidal  effects  must  be  accounted  for.  Thus,  a  standard  expression  for  the  tidal  vari- 
ations in  UT1  is  required.  The  periodic  variations  in  UTl  due  to  tidal  deformation 
of  the  polar  moment  of  inertia  have  been  rederived  (Yoder  et  ai,  1981)  including 
the  tidal  deformation  of  the  Earth  with  a  decoupled  core. 

This  model  leads  to  effective  Love  numbers  that  differ  from  the  bulk  value  of 
0.301  because  of  the  oceans  and  the  fluid  core,  which  give  rise  to  different  theoretical 
values  of  the  ratio  kl C  for  the  fortnightly  and  monthly  terms.  However,  Yoder  et  ai, 
recommend  the  value  of  0.94  for  k/C  for  both  cases.  Periodic  terms  in  UTl  are  given 
in  Table  4.37.1  and  are  discussed  in  Explanatory  Supplement  to  the  IERS  Bulletins 
A  and  B,  March  1989  as  well  as  the  Annual  Reports  of  the  IERS.  Table  4.37.1 
includes  terms  due  to  zonal  tides,  with  periods  up  to  35  days,  with  k/C  =  0.94. 
Table  4.37.2  lists  the  remainder  of  the  tidal  terms  (with  periods  greater  than  35 
days). 

UTlR,  AR,  and  ujR  represent  the  regularized  forms  of  UTl  (including  periods 
up  to  35  days),  of  the  duration  of  the  day,  A,  and  of  the  angular  velocity  of  the 
Earth,  w.  The  units  are  10-4s  for  UT,  10_5s  for  A,  and  10_I4rad/s  for  0. 

It  should  be  mentioned  that  the  oceanic  tides  with  short  periods  cause  varia- 
tions in  UTl  that  are  only  partially  represented  by  the  model  given  below.  Accord- 
ing to  Brosche  et  al.  (1989)  the  contribution  of  the  oceanic  tides  should  be  split  into 
a  part  that  is  in  phase  with  the  solid  Earth  tides  and  into  an  out-of-phase  part.  The 
discrepancy  between  the  model  of  Yoder  et  ai,  (which  already  contains  a  general 
influence  of  the  oceans)  and  the  model  of  Brosche  et  al,  amounts  to  a  maximum 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  251 

0f  ±  0. 08  msec  for  the  fortnightly  and  monthly  terms.  The  influence  of  the  ocean 
tides  with  periods  less  than  or  equal  to  24h  is  at  the  level  of  ±  0. 1  msec. 

4  4   THE  MONITORING  OF  THE  ROTATION  OF  THE  EARTH 

Continuous  monitoring  of  the  Earth's  rotation  began  after  Kiistner's  discovery  of 
the  variation  of  latitude  in  1884,  and  Chandler's  explanation  of  it  as  polar  mo- 
tion (Chandler  wobble).  Optical  astrometric  methods  then  in  use  have  continued 
to  this  day,  and  in  fact  continued  to  be  the  only  source  of  Earth-rotation  infor- 
mation up  until  the  mid-1960s.  More  modern  techniques  then  gradually  took  over 
the  bulk  of  the  activity  of  monitoring  the  rotation  of  the  Earth,  with  successively 
Doppler  tracking  of  satellites,  Connected  Element  Radio  Interferometry  (CERI), 
Lunar  Laser-Ranging  (LLR),  Satellite  Laser-Ranging  (SLR),  and  Very  Long  Base- 
line Interferometry  (VLBI)  assisting  in  such  monitoring.  At  present,  the  techniques 
of  SLR  and  VLBI  provide  most  of  the  current  high-accuracy  observations  for  this 
purpose,  with  LLR  providing  such  data  sporadically. 

Before  we  describe  the  observational  systems  and  services,  the  basic  sensitivity 
of  the  systems  should  be  briefly  explained.  All  the  current  observational  systems 
depend  on  the  existence  of  observing  astronomical  targets  whose  position  can  be 
inferred  in  some  celestial  reference  frame.  This  includes  stars  and  solar-system  ob- 
jects for  optical  astrometry,  the  Moon  and  artificial  satellites  for  laser  ranging,  and 
(usually  distant)  radio  sources  for  radio  interferometry.  The  observations  of  these 
systems  are  then  used  to  infer  the  motion  of  the  observing  instruments  or,  more 
specifically,  the  Earth  to  which  they  are  attached.  After  the  predicted  motion  from 
all  other  "defined"  sources  (as  explained  previously,  including  precession,  nutation, 
the  Earth's  sidereal  rotation,  tides,  tectonic  motions,  etc.)  has  been  removed,  the 
motion  that  remains  is  attributed  to  polar  motion  and  UTl-UTC  variations.  How- 
ever, as  we  shall  see,  some  proposed  fut  ure  systems  of  Earth  rotation  monitoring  do 
depend  instead  on  the  sensing  of  a  local  "inertial"  coordinate  system,  rather  than 
an  astronomically  defined  one. 

It  is  also  important  to  note  that  a  single  instrument  (or  single  baseline  for  in- 
terferometric  observing),  being  at  a  given  point  on  the  Earth's  surface,  can  be  used 
to  determine  only  two  components  of  the  Earth's  rotation.  The  components  com- 
monly determined  using  single-station  (or  single-baseline)  data  include  "variation 
in  latitude"  (A<j>)  due  to  any  north-south  motion  of  the  station,  and  UT0-UTC 
(or  just  UT0)  when  there  is  any  east-west  motion  of  the  station,  attributable  to 
Earth  rotation  variations.  To  obtain  all  three  components  of  Earth  rotation,  it  is 
necessary  and  sufficient  to  use  data  from  two  stations  (or  baselines)  with  different 
longitudes.  If  multiple  stations  (or  baselines)  with  different  longitudes  are  involved, 
the  problem  is  overdetermined  and  generally  a  least-squares  solution  is  done  to 
determine  the  Earth-rotation  parameters  (ERP). 


Table  4.37.1 

Zona!  Tide  Terms  with  Periods  Up  to  35  Days 


Argument*  Period 


/        I'        F       D       a  Days 


UT1  -  UT1 R  A-AR  u>  -  u;R 
Coefficient  of  Coefficient  of 

sin  (argument)        cos  (argument) 


1 

0 

2 

2 

2 

5.64 

—  0.02 

Lr.o 

— U.^ 

2 

0 

2 

0 

1 

6.85 

-0.04 

0.4 

-0.3 

2 

0 

2 

0 

2 

6.86 

-0.10 

0.9 

-0.8 

0 

0 

2 

2 

¥  ' 

7.09 

-0.05 

0.4 

-0.4 

0 

0 

2 

2 

2 

7.10 

-0.12 

1.1 

-0.9 

1 

0 

2 

0 

0 

9.11 

—  0.04 

n  o 

U.d 

—0.2 

1 

0 

2 

0 

& 

9.12 

-0.41 

2.8 

-2.4 

1 

0 

2 

0 

2 

9.13 

-0.99 

6.8 

-5.8 

3 

0 

0 

0 

0 

9.18 

-0.02 

0.1 

-0.1 

—  1 

o 

2 

2 

1 

9.54 

-0.08 

0.5 

-0.5 

—  1 

0 

2 

2 

2 

9.56 

—0.20 

1 .3 

—  1.1 

1 

0 

0 

2 

0 

9.61 

-0.08 

0.5 

-0.4 

2 

0 

2 

-2 

2 

12.81 

0.02 

-0.1 

0.1 

0 

1 

2 

0 

2 

13,17 

0.03 

-0.1 

0.1 

0 

0 

2 

0 

0 

13.61 

-0.30 

1.4 

-1.2 

0 

0 

2 

0 

1 

13.63 

3.21 

14,8 

—  12.5 

o 

o 

2 

0 

2 

13.66 

-7.76 

35.7 

-30.1 

2 

0 

0 

0 

1 

13.75 

0.02 

-0,1 

0.1 

2 

0 

0 

0 

0 

13.78 

-0.34 

1.5 

-1.3 

2 

0 

0 

0 

1 

13.81 

0.02 

-0.1 

0.1 

0 

—1 

2 

0 

2 

14.19 

—0.02 

0,1 

—0.1 

0 

0 

0 

2 

-1 

14.73 

0.05 

-0.2 

0.2 

0 

0 

0 

2 

0 

14.77 

-0.73 

3.1 

-2.6 

0 

0 

0 

2 

1 

14.80 

-0.05 

0.2 

-0.2 

0 

-1 

0 

2 

0 

15.39 

-0.05 

0.2 

-0.2 

\ 

0 

2 

-2 

1 

23.86 

0.05 

—0.1 

0.1 

0 

2 

-2 

2 

23.94 

0.10 

-0.3 

0.2 

1 

1 

0 

0 

0 

25.62 

004 

-0.1 

0.1 

_■) 

0 

2 

0 

0 

26.88 

0.05 

-0.1 

0.1 

_1 

0 

2 

0 

1 

26.98 

0.18 

-0.4 

0.3 

-1 

0 

2 

0 

2 

27.09 

0.44 

-1.0 

0.9 

0 

0 

0 

-1 

27.44 

0.53 

-1.2 

1.0 

0 

0 

0 

0 

27.56 

-8.26 

18.8 

-15.9 

0 

0 

0 

1 

27.67 

0.54 

-1.2 

1.0 

0 

0 

1 

0 

29.53 

0.05 

-0.1 

0.1 

-1 

0 

0 

0 

29.80 

-0.06 

0.1 

-0.1 

0 

0 

2 

-1 

31.66 

0.12 

-0.2 

0.2 

0 

0 

3 

0 

31.81 

-1.82 

3.6 

-3.0 

0 

0 

2 

1 

31.96 

0.13 

-0.3 

0.2 

0 

-2 

2 

-1 

32.61 

0.02 

0.0 

0.0 

-1 

0 

2 

0 

34.85 

-0.09 

0.2 

-0.1 

*    /  =  134. 96°  +  13. 064993°(MJO-51544.5)  Mean  anomaly  of  1he  Moon 

/'  =  357.53°  +  0. 985600° (MJD-51544.5)  Mean  anomaly  of  the  Sun 

F  =  93.27°  +  13. 229350°  (MJD-51544.5)  L-  SI:U  Mean  longitude  of  the  Moon 

D  =  297. 85°  +  12. 190749° (MJD-51544.5)  Mean  elongation  of  the  Moon  from  the  Sun 

SI  =  125. 04°  -  0.052954°  (MJD-51544.5)  Mean  longitude  of  the  ascending  node  of  the  Moon 


/  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  253 


Table  4.37.2 

Zonal  Tide  Terms  with  Periods  Greater  than  35  Days 


Argument* 

Period 

UT1  -  UTIfl 

A-AR 

u-  -  ujR 

<— 

— — 

Coefficient  of 

Coefficient  of 

/ 

/' 

F 

D 

n 

Days 

sin  (argument) 

cos  (argument) 

0 

2 

2 

-2 

2 

91.31 

-0.06 

0.0 

0.0 

0 

1 

2 

-2 

1 

119.61 

0.03 

0.0 

0.0 

0 

1 

2 

-2 

2 

121.75 

—  1.88 

1.0 

-0.8 

0 

u 

2 

_2 

o 

173.31 

0.25 

-0.1 

0.1 

0 

f\ 
u 

2 

-2 

1 

177.84 

1.17 

-0.4 

0.3 

0 

0 

2 

-2 

2 

182,62 

-48.25 

16,6 

-14.0 

0 

2 

0 

0 

0 

182.63 

-0.19 

0.1 

-0.1 

2 

0 

0 

-2 

-1 

199,84 

0.05 

0.0 

0.0 

2 

u 

o 

_2 

o 

205.89 

-0.55 

0.2 

-0.1 

2 

u 

o 

-2 

1 

212.32 

0.04 

0.0 

0.0 

0 

_1 

2 

-2 

1 

346.60 

-0.05 

n  rv 

U.Lf 

0 

1 

0 

0 

-1 

346.64 

0.09 

0.0 

0.0 

0 

-1 

2 

-2 

2 

365.22 

0.83 

-0.1 

0.1 

0 

0 

0 

0 

365.26 

-15.36 

2.6 

-2.2 

0 

0 

0 

1 

386.00 

—0,14 

0.0 

0.0 

1 

0 

0 

-1 

0 

411.78 

0.03 

0.0 

0.0 

2 

0 

-2 

0 

0 

1095,17 

-0.14 

0.0 

0.0 

-2 

0 

2 

0 

1 

1305.47 

0.42 

0.0 

0.0 

-1 

1 

0 

1 

0 

3232.85 

0.04 

0.0 

0.0 

0 

0 

0 

0 

2 

3399.18 

7.90 

0.1 

-0.1 

0 

0 

0 

0 

1 

6790.36 

-1617.27 

-14.9 

12.6 

/  =  134. 96°  +  13. 064993°{MJD-51544.5)  Mean  anomaly  of  the  Moon 

/'  =  357. 53°  +  0. 985600°  (MJD-51544.5)  Mean  anomaly  of  the  Sun 

F  =  93.27°  +  13. 229350° (MJD-51544.5)  L  -  Si:  L;  Mean  longitude  of  the  Moon 

D  =  297. 85°  +  12. 190749°(MJD-51544.5)  Mean  elongation  of  the  Moon  from  the  Sun 

n  =  125.04°  -  0.052954° (MJD-51544.5)  Mean  longitude  of  the  ascending  node  of  the  Moon 


The  actual  equations  for  expressing  Acp  and  UT0-UTC  in  terms  of  xp,  yp,  and 
UT1-UTC  are 

A<j>  =  xp  cos  A  -  yp  sin  A,  (4.4-1 ) 

UT0  -  UTC  =  tan  <Mx„  sin  A  +  yp  cos  A)  +  (UT1  -  UTC),  (4.4-2) 

where  r/>  and  A  are  the  latitude  and  longitude  of  the  station  (or  baseline),  with 
longitude  again  measured  toward  the  east.  In  cases  where  data  from  more  than 
two  stations  (baselines)  exist,  a  least-squares  solution  is  generally  performed  with 
the  above  equations  (for  most  multistation  optical  astrometry  and  LLR  quick-look 
solutions),  or  else  a  general  least-squares  solution  is  performed,  solving  for  the  three 
components  of  Earth  rotation  (among  many  other  parameters)  directly  from  the 
observations. 


254  EXPLANATORY  SUPPLEMENT 

Following  are  discussions  of  the  individual  methods  for  Earth-rotation  deter- 
mination. First,  the  current  high-accuracy  methods  are  described  including  laser 
ranging  (both  lunar  and  satellite)  and  VLBL  Second,  historical  methods  are  dis- 
cussed. Third,  some  proposed  future  or  alternate  techniques  are  described.  For  all 
these  methods,  only  basic  descriptions  of  the  observing  systems  are  presented,  along 
with  summaries  of  the  actual  operational  systems.  Finally,  the  current  international 
service  for  Earth  rotation  is  described.  (A  similar  review  also  exists  in  Moritz  and 
Mueller,  1987,  as  well  as  in  IERS,  1988.) 

4.41    Laser  Ranging 

Laser  ranging  of  celestial  targets,  first  proposed  (for  the  Moon)  in  the  late  1950s  and 
early  1960s  (Alley,  1983),  is  conceptually  a  very  simple  observational  procedure.  A 
laser  beam  is  directed  to  a  celestial  target  carrying  retroreflectors,  such  as  the  Moon 
or  an  artificial  satellite.  Half  the  round-trip  travel  time  of  the  light  multiplied  by  the 
velocity  of  light  gives  the  distance  to  the  object  (subject  to  various  corrections  due 
to  relative  motion,  refraction,  etc.).  These  ranges  can  then  be  compared  to  their 
predicted  values,  and  in  an  adjustment  (usually  weighted  least  squares),  corrections 
to  the  parameters  involved  may  be  estimated,  such  as  the  orbital  parameters,  the 
station  positions,  and  the  orientation  of  the  Earth. 

4.411  Satellite  Laser-Ranging  Currently  there  are  several  satellites  available  for 
laser  ranging,  but  observations  of  the  Laser  Geodynamics  Satellite  (LAGEOS)  cur- 
rently provide  the  highest-accuracy  values  for  the  above  parameters.  (However,  the 
USSR  has  recently  launched  two  similar  satellites,  Etalon  1  and  2,  which  show  great 
promise  as  targets  for  providing  such  information  (Anodina  and  Prilepin,  1989).) 
LAGEOS  itself  is  a  composite  (aluminum  shell  and  brass  core)  sphere,  60  cm  in 
diameter,  weighing  407  kg,  with  4263.8  cm  cube  corner  retroreflectors  embedded  in 
its  surface.  It  is  in  a  nearly  circular  orbit  at  a  height  of  about  5900  km,  and  an 
inclination  of  109.8°.  Its  relatively  large  mass,  small  surface  area,  and  high  orbit 
result  in  low  atmospheric  drag  and  insensitivity  to  short-wavelength  components  of 
the  Earth's  gravity  field.  More  information  on  LAGEOS  and  other  such  geodetic 
satellites  is  available  in  Cohen  et  al.  (1985). 

There  are  approximately  25  SLR  stations  in  regular  operation,  located  on  eight 
tectonic  plates,  regularly  obtaining  observational  data.  The  precision  of  ranges  ob- 
tained from  these  instruments  are  on  the  order  of  ±  1  to  ±  15  cm.  (For  more  infor- 
mation on  the  instruments  themselves,  see  Shawe  and  Adelman,  1985  and  Degnen, 
1985.)  These  stations  are  operated  by  various  governmental  and  university  research 
organizations,  in  order  to  obtain  various  geophysical  data  relating  not  only  to  Earth 
rotation,  but  station  coordinates  and  baseline  lengths,  changes  in  those  values  over 
time  {thereby  giving  tectonic-plate  motion  velocities),  and  long- wavelength  compo- 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  255 

nents  of  the  Earth's  gravity  field.  The  coordinates  of  the  stations  computed  by  this 
technique  have  an  origin  which  is  thought  to  be  coincident  with  the  center  of  mass 
of  the  Earth  to  within!  10  cm.  Earth-rotation  results  are  computed  at  3-day  inter- 
vals using  data  less  than  a  week  old,  with  polar  motion  and  UT1-UTC  accurate 
to  a  few  milliseconds  of  arc  (mas)  and  a  few  tenths  of  a  millisecond  respectively, 
(Further  information  on  the  computational  techniques  involved  is  given  in  Kaula, 
1966,  pp-  78-81,  and  GSFC,  1976,  pp.  7-11  to  7-15.) 

4.412  Lunar  Laser-Ranging  Lunar  Laser-Ranging  (LLR)  is  identical  in  concept 
with  SLR,  except  that  the  targets  are  arrays  of  cube  corner  reflectors  left  on  the 
Moon  by  the  U.S.  Apollo  astronauts  and  USSR  unmanned  probes.  However,  the 
distance  to  the  Moon  makes  it  more  difficult  to  point  a  laser  reliably  at  the  re- 
flectors, and  when  there  are  return  signals,  they  are  orders  of  magnitudes  weaker 
than  those  from  the  LAGEOS  satellite.  Although  LLR  has  been  done  since  Au- 
gust of  1969  (initially  using  the  array  left  by  the  Apollo  11  astronauts  (Armstrong, 
1977)),  these  technical  difficulties  have  resulted  in  few  stations  reaching  continued 
operational  status.  Currently  data  is  obtained  regularly  by  the  Centre  d'Etudes  et 
des  Recherches  Geodynamics  et  Astronomiques  (CERGA)  station  near  Toulouse, 
France;  the  University  of  Hawaii  LURE  Observatory  on  Maui,  Hawaii;  and  the  Mc- 
Donald Observatory,  Texas.  Much  of  the  same  information  obtained  with  SLR  can 
be  obtained  from  LLR.  However,  in  practice,  with  only  a  limited  number  of  stations, 
the  primary  use  of  the  LLR  systems  has  been  for  the  determination  of  UT0-UTC 
(and  thereby  UTl-UTC),  parameters  of  the  Moon's  orbit  and  the  Moon's  rotation 
(librations),  special-  and  general-relativity  parameter  tests,  and  information  on  the 
tidal  parameters  of  the  Earth-Moon  system.  LLR  also  shows  promise  in  providing 
quick  determinations  of  UT0-UTC,  since  its  computation  is  a  simple  matter  as  soon 
as  the  day's  observations  are  completed  at  a  given  station.  Currently  UT0-UTC  is 
determined  irregularly  (at  each  of  the  three  operating  stations)  with  an  accuracy 
of  ±  0.  3  to  ±  0. 7  ms  (McCarthy  and  Luzum,  1990).  Larden  (1982,  p.  250)  indicates 
that  with  a  four  or  five  station  network,  and  ranging  regularly  with  ±  3  cm  range 
accuracy,  that  ±  5 cm  (±  1 . 6 mas  for  polar  motion,  iO.lms  for  UTl-UTC)  two-day 
ERP  determination  should  be  possible.  Further  information  on  the  computational 
techniques  involved  is  given  by  Arnold  (1974,  pp.  249-255),  Mulholland  (1977),  and 
Larden  (1982,  pp.  69-90). 


4.42   Very  Long  Baseline  Interferometry 

In  geodetic  Very  Long  Baseline  Interferometry  (VLBI),  the  primary  targets  being 
observed  are  a  set  of  extragalactic  radio  sources.  These  objects  are  presumably  so 
distant  that  none  of  their  motions  are  detectable,  and  they  therefore  form  a  fixed 
celestial  reference  frame.  Currently,  some  228  sources  have  positions  established 
(published)  within  such  a  system,  but  only  about  74  objects  have  been  observed 


256  EXPLANATORY  SUPPLEMENT 

from  more  than  one  network,  and  only  about  23  repeatedly  from  more  than  two 
networks  (Arias,  et  ai,  1988). 

The  VLBI  observing  networks  consist  of  two  to  generally  four  or  five  radio  tele- 
scopes that  simultaneously  track  extragalactic  radio  sources.  Each  station  records 
X  and  S  band  radio  signals  in  digital  form  on  magnetic  tape,  along  with  precise 
time  signals  provided  by  hydrogen-maser  frequency  standards.  Typically,  10  to  20 
sources  are  tracked  for  periods  of  3  to  6  minutes  several  times  over  the  course  of  a 
24-hour  observing  session.  The  tapes  are  sent  to  a  correlator  center,  where  they  are 
replayed.  The  differences  in  arrival  times  of  the  radio  source  signals  ("delays"),  and 
their  differences  in  time  ("delay  rates")  are  determined  between  each  pair  of  sta- 
tions. Similar  to  the  laser  ranging  solutions,  these  delays  and  delay  rates  are  then 
used  in  a  least-squares  adjustment  in  order  to  estimate  a  variety  of  geophysical 
parameters  and  the  coordinates  of  the  radio  sources. 

Currently  some  20  radio  telescopes  in  the  world  have  been  outfitted  for  making 
high-accuracy  geodetic  VLBI  observations  (using  Mark  III  equipment,  see  Clark  et 
ai,  1985).  Although  many  of  these  are  radio  telescopes  shared  between  geodetic 
and  astrophysical  observations,  several  are  dedicated  primarily  to  determination  of 
ERP.  These  include  primarily  two  networks:  Projects  Polaris/IRIS  (Carter  et  ai, 
1984;  Carter  and  Robertson,  1984),  operated  by  the  U.S.  National  Geodetic  Survey, 
consisting  of  four  or  five  stations  operating  in  the  United  States  and  Europe;  and 
the  Navy  Network,  operated  by  the  U.S.  Naval  Observatory,  consisting  of  four  to 
six  stations  operating  in  North  America  and  Hawaii.  The  IRIS  stations  observe 
for  24  hours,  every  7  days,  using  14  different  radio  sources.  Current  accuracies 
of  the  data  obtained  include  polar  motion  at  ±  1-2  mas,  UTl— UTC  at  ±  0.05- 
0.10  ms,  nutation  and  precession  (celestial  pole)  corrections  at  ±  1-2  mas,  radio- 
source  coordinates  at  less  than  ±  1  mas,  and  VLBI  station  coordinates  at  a  few 
centimeters.  Daily  observations  of  four  sources  for  1  hour,  from  two  stations,  also 
provides  daily  determinations  of  UT0-UTC.  The  Navy  Network  observes  for  24 
hours  every  7  days,  using  26  different  radio  sources.  Observations  every  few  days 
for  three  hours  provide  daily  UT0— UTC  values  (with  two  stations)  with  accuracies 
similar  to  the  IRIS  results.  Observations  are  also  made  by  stations  operated  at 
occasional  intervals  by  the  U.S.  NASA  Crustal  Dynamics  Project  (CDP)  for  the 
monitoring  of  plate  tectonics  and  Earth  rotation  (Coates  et  ai,  1985). 

Further  information  on  the  computational  techniques  involved  is  given  by  GSFC 
(1976,  pp.  7-41  to  7-42)  Robertson  (1975),  Ma  (1978),  McLintock  (1980),  and  Bock 
(1980). 

4.43   Historical  Methods 

Various  methods  of  lesser  accuracy  for  ERP  determination  have  existed  in  the  past, 
with  some  still  in  operational  use  today  for  special  purposes.  These  techniques  in- 
clude primarily  optical  astrometric  methods,  with  space  techniques  such  as  Doppler 


TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  257 

ellite  tracking  and  Connected-Element  Radio  Interferometry  (CERI)  having  been 
>d  for  operational  purposes  in  the  1960s  and  1970s. 


4  431  Optical  Astrometric  Techniques  An  explanation  of  the  motion  of  the  Earth's 
pole  was  first  made  by  Chandler  in  the  early  1890s  {Chandler,  1891,  1892),  using 
transit  circle  observations  by  Kiistner  dating  from  the  late  1880s.  Chandler,  and 
later  others,  also  used  various  astrometric  observations  from  transit  circles,  quad- 
rants, and  other  visual  optical  instruments  dating  back  to  the  early  1700s.  The 
1890s  saw  the  establishment  of  the  International  Latitude  Service  (ILS),  which  op- 
erated several  stations  at  approximately  39°  latitude  until  the  1970s.  The  use  of 
visual  zenith  tubes  and  the  invention  of  photographic  zenith  tubes  (in  1913  by 
Ross)  brought  the  measurement  of  polar  motion  to  accuracy  levels  pretty  much 
maintained  into  the  1960s.  The  use  of  precise  pendulum  clocks  in  the  1930s  allowed 
the  detection  of  seasonal  variations  in  the  length  of  day.  Special  Moon  cameras  were 
also  used  from  1952  until  the  early  1960s  in  order  to  measure  changes  in  the  length 
of  day  against  ephemeris  time  derived  from  the  observed  position  of  the  Moon.  The 
same  equipment  was  also  used  to  compare  ephemeris  time  with  atomic  time  and 
to  establish  the  definition  of  the  second  (Markowitz  et  ai,  1958;  Markowitz,  1960). 
The  International  Polar  Motion  Service  (IPMS),  following  on  the  ILS,  coordinated 
and  reduced  the  polar-motion  observations.  The  Bureau  International  de  THeure 
(BIH)  did  the  same  for  UT0-UTC  related  observations,  and  also  eventually  be- 
gan to  handle  polar-motion  data  in  order  to  provide  rapid  service  UT1-UTC.  The 
optical  techniques  continued  as  the  only  source  of  ERP  measurements  until  the 
mid-1960s,  when  Doppler  satellite  tracking  began  to  provide  information  on  polar 
motion.  More  than  100  optical  instruments  all  over  the  world  were  at  one  time 
in  use  for  such  measurements.  Currently,  a  small  number  of  such  instruments  are 
still  in  operation,  primarily  as  a  backup  to  and  as  a  possible  check  on  the  space 
geodetic  techniques,  and  to  continue  their  useful  long  record  of  continuous  observa- 
tions. The  primary  disadvantages  (for  improved  ERP  determination)  of  the  optical 
astrometric  techniques  are  their  dependence  on  the  local  vertical  as  their  primary 
reference  and  the  accuracy  of  the  star  catalogs  they  use  to  define  a  celestial  refer- 
ence system.  The  geodetic  space-based  techniques  that  have  mostly  replaced  them 
are  little  affected  by  variations  in  the  local  vertical  and  provide  instead  for  a  crust- 
fixed  three-dimensional  reference  system.  Information  on  these  instruments  and 
the  various  international  services  involved  is  given  in  reviews  (Moritz  and  Mueller, 
1987,  pp.  324-337,  424-430,  456-465;  Mueller,  1969,  pp.  80-84;  Lambeck,  1980,  pp. 
62-66;  Munk  and  MacDonald,  1960,  pp.  58-61;  Bomford,  1971,  pp.  312,  335-338.) 


4.432  Doppler  Satellite  Tracking  During  the  1960s,  Doppler  tracking  of  the  U.S. 
Navy  Navigational  Satellite  System  (NNSS)  began  to  provide  polar-motion  infor- 
mation on  the  same  level  of  accuracy  or  better  than  the  optical  techniques.  The 


258 


EXPLANATORY  SUPPLEMENT 


ERP  values  obtained  via  this  system  were  used  by  the  BIH  in  combination  with  the 
optically  obtained  values.  However,  this  technique  did  suffer  from  the  dependence 
of  the  ERP  values  on  the  particular  satellites  in  use  and  from  long-term  drifts, 
and  as  SLR  became  available  for  polar  motion  monitoring  in  the  late  1970s,  began 
to  be  phased  out  for  active  ERP  use.  An  excellent  review  of  the  NNSS  Doppler 
satellite-tracking  technique  is  given  by  Kouba  (1983),  and  a  review  of  ERP-related 
use  of  such  tracking  is  given  by  Moritz  and  Mueller  (1987,  pp.  338-344,  467-470). 

4.433  Connected-Element  Radio  Interferometry  One  other  method  that  enjoyed 
some  use  in  the  late  1970s  and  1980s  was  the  use  of  Connected-Element  Radio 
Interferometry  (CERI).  CERI  operates  in  principle  in  the  same  fashion  as  VLB1 
(and,  in  fact,  provided  the  initial  tests  of  the  VLBI  principle),  except  that  the  radio 
telescopes  are  physically  connected  by  a  wideband  communications  link,  so  that 
the  observations  {delays  and  delay  rates — see  Section  4.42)  are  made  in  real  time. 
A  least-squares  solution  to  obtain  ERP,  station  positions,  and  source  positions  can 
then  be  made  as  soon  as  observing  ends  for  the  day.  Although  the  speed  at  which 
results  could  be  made  available  was  a  strong  point  of  CERI,  the  small  size  of  the 
arrays  usually  only  allowed  two  ERP  components  to  be  determined  simultaneously, 
such  as  A4>  and  UTO-UTC.  The  U.S.  Naval  Observatory  operated  such  an  inter- 
ferometer at  Green  Bank,  West  Virginia,  from  October  1978  until  the  end  of  1987. 
Polar  motion  and  UTO-UTC  could  be  determined  to  an  accuracy  of  about  50  mas 
and  4.6ms  respectively  (McCarthy  et  ai,  1985;  Matsakis  et  at,  1986).  Another 
CERI  was  also  operated  for  a  short  time  (August-September,  1980)  at  Cambridge. 
U.K.  (Klepczynski,  1982).  The  eventual  improvement  in  the  turnaround  time  and 
much  higher  accuracy  of  VLBI  results  led  to  the  eventual  demise  of  this  technique 
for  ERP  determination. 


4.44   Alternative  Techniques 

Several  observational  methods  are  under  development  that  show  promise  in  the 
field  of  Earth-rotation  measurement.  The  current  level  of  development  of  these 
techniques  of  course  varies  greatly,  and  the  future  levels  of  deployment  and  accu- 
racies achievable  by  these  techniques  is  still  not  clear.  The  primary  contender  for 
providing  high-accuracy  Earth-rotation  information  is  the  Global  Positioning  Sys- 
tem, a  global  network  of  24  satellites  intended  for  navigation,  which  is  currently 
only  partially  deployed.  The  use  of  laser  ring  gyroscopes  or  superfluid  helium  inter- 
ference gyroscopes  may  also  allow  such  changes  in  the  Earth's  rotational  velocity 
to  be  monitored.  These  last  techniques  may  be  of  particular  interest,  since  they 
have  no  dependence  on  astronomical  observations  and  may  also  be  used  as  a  check 
on  current  techniques.  What  follows  are  more  detailed  accounts  of  these  three  pos- 


4  i  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  259 

sible  alternative  observational  systems.  Of  course,  it  should  also  be  realized  that 
improvements  in  the  currently  used  observational  systems  (previously  mentioned) 
also  show  great  promise. 


4  441  The  Global  Positioning  System  (GPS)  The  Global  Positioning  System  was 
designed  as  an  all-weather,  continuous,  and  global  satellite  navigation  system.  In 
its  basic  configuration  it  was  to  be  used  for  navigation,  but  is  also  quite  usable  for 
time  transfer  and  geodetic  positioning  of  points  on  the  ground.  It  was  designed,  is 
under  development  by,  and  will  be  operated  by  the  U.S.  Department  of  Defense. 

The  "space  segment"  of  the  system  will  consist  of  24  satellites  in  12-hour, 
20000-km-altitude  orbits,  with  the  satellites  equally  spaced  in  three  orbital  planes, 
inclined  at  55°  to  the  equator.  Each  satellite  will  broadcast  on  two  L-band  frequen- 
cies, L\  (1575.4  MHz)  and  Li  (1227.6  MHz),  with  the  two  frequencies  allowing  the 
elimination  of  first-order  ionospheric  refraction  effects.  Modulated  onto  these  fre- 
quencies will  be  three  codes,  including  (1)  a  "D"  code,  containing  information  (at 
50  bits/second)  on  the  predicted  position  of  the  satellite  and  the  satellite  itself,  (2) 
a  coarse  acquisition  "C/A"  code,  a  pseudorandom  noise  (PRN)  code  at  a  frequency 
of  1.022  MHz,  which  repeats  every  one  millisecond,  and  (3)  a  precise  "P"  code, 
another  PRN  code  at  a  frequency  of  10.23  MHz,  which  repeats  every  38  weeks,  but 
will  be  reset  in  practice  every  week.  Each  satellite  also  has  a  very  precise  cesium  or 
rubidium  clock  to  provide  precise  time  and  stable  frequency  information.  Currently 
(1991  September),  there  are  six  operating  prototype  (Block  I)  satellites  and  eleven 
operational  (Block  II)  satellites  in  orbit  that  allow  the  system  to  be  used  inter- 
mittently. The  launch  of  more  Block  II  GPS  satellites  is  planned  to  continue  using 
Delta-2  boosters.  This  process  will  continue  until  the  system  is  fully  operational 
(with  21  satellites  and  3  spares)  in  1993. 

The  "user  segment"  will  generally  consist  of  users  with  navigation  receivers. 
These  receivers  will  be  capable  of  "locking  on"  to  four  satellites  at  a  time,  gener- 
ating C/A-  (or  for  more  precision,  P-)  codes,  shifting  those  codes  in  time  to  match 
those  of  the  satellites,  and  decoding  the  D-code  information  from  the  satellites. 
The  position  of  the  satellites  will  then  be  known  from  the  D-code  information,  and 
it  is  only  necessary  to  take  the  four  observations  (one  to  each  satellite)  and  solve 
four  equations  for  the  four  unknowns  of  the  receiver's  position  (say  X,  Y,  Z)  and 
time  (this  process  being  known  as  "pseudoranging" ) .  A  "Standard  Positioning  Ser- 
vice" will  be  available  to  all  users.  This  service  allows  use  of  the  C/A  code  (but 
with  a  degraded  signal  for  the  Block  II  satellites  —in  a  process  known  as  "Selective 
Availability"  (SA)),  for  determining  the  receiver's  position  anywhere  on  Earth  to 
approximately  100  200  meters.  Using  the  P  code,  which  will  be  available  only  to 
qualified  users  as  the  "Precise  Positioning  Service,"  positional  accuracies  of  15-30 
meters  are  possible.  Once  "locked  on"  to  the  satellites  (a  process  that  takes  at  most 


260  EXPLANATORY  SUPPLEMENT 

a  few  minutes),  real-time  updates  will  be  available  every  4-5  seconds.  Differential 
techniques  are  under  development  by  the  private  sector  that  will  eventually  al- 
low instantaneous  cm-level  relative  positioning.  In  these  techniques  it  is  envisioned 
that  permanent  ground  stations  will  continuously  track  GPS  satellites  and  supply 
their  observations  (in  some  form)  over  a  communications  link  to  mobile  users.  The 
observations  may  then  be  "differenced"  or  combined  in  some  way  to  get  very  high- 
accuracy  station  positions.  Since  any  change  in  the  satellite  signals  will  affect  both 
receivers  equally,  any  degradation  or  coding  of  the  signals  will  have  little  effect  on 
the  accuracy  of  the  relative  station  positions. 

For  geodetic  use  of  these  satellites,  observations  can  simply  be  made  for  longer 
periods,  and  with  more  satellites,  in  order  to  increase  the  positional  accuracy.  It  is 
estimated  that  absolute  accuracies  on  the  order  of  +  1  meter  or  less  are  possible. 
Alternatively,  two  or  more  receivers  may  also  be  used  in  a  differential  or  interfer- 
ometric  mode,  analogous  to  the  VLBI  observations  discussed  previously,  and  the 
relative  positions  of  the  two  receivers  established  to  the  millimeter  level  on  baselines 
of,  say,  up  to  50  kilometers  in  length.  Centimeter-level  accuracy  is  available  on  base- 
lines of  much  longer  length,  but  uncertainties  introduced  by  the  Earth's  atmosphere 
and  the  satellite  positions  cause  increasing  errors  with  increasing  baseline  length. 
As  has  already  been  described  in  Chapter  2,  in  addition  to  the  positional  informa- 
tion, the  user's  clock  can  be  set  relative  to  the  GPS  satellite  clocks  to  accuracies  as 
good  as  ±  10  nanoseconds  or  better,  thus  providing  a  time-transfer  mechanism  of 
extremely  high  accuracy. 

For  the  purposes  of  Earth  rotation,  one  must  assume  that  three  or  more  satellite- 
tracking  stations  are  in  use  at  known  locations.  It  is  then  possible  to  determine  the 
position  of  the  satellites  with  respect  to  the  ground  stations,  as  well  as  the  orienta- 
tion of  the  Earth  with  respect  to  the  "inertia]"  coordinate  system  established  by  the 
satellites.  In  practice,  such  tracking  will  be  done  by  the  "control  segment,"  Dept. 
of  Defense  tracking  stations  responsible  for  operating  the  satellite,  other  govern- 
ment networks  (e.g.,  that  operated  by  the  U.S.  National  Geodetic  Survey  (NGS)  at 
U.S.  IRIS  VLBI  stations),  or  private  groups.  Any  of  these  data  are  now  partially 
usable  for  Earth  rotation  determination,  and  should  be  capable  of  providing  high- 
accuracy  ERP  values  once  the  entire  GPS  satellite  system  is  operational.  Abbot  et 
al.  (1988)  have  already  used  data  obtained  in  1985  to  show  that  errors  could  be 
kept  to  ±  40 mas  in  xp,  ±  70  mas  in  yp,  and  +  0.  9rns  in  UT1-UTC  over  5  days  of 
measurement.  Zelensky  et  al.  (1990),  in  a  covariance  analysis  of  observations  of  18 
Block  II  satellites,  show  that  accuracies  in  the  range  of  0.2  to  1.0  mas  for  all  three 
ERP  components  will  be  possible.  Paquet  and  Louis  (1990)  in  a  simulation  (with 
18  satellites  and  10  tracking  stations  making  +  10  cm  accuracy  measurements)  show 
possible  accuracies  in  the  range  of  less  than  ±  3  mas  for  24  hours  and  ±  3-5  mas  for 
6  hours  of  observation  for  pole  position,  and  ±  0. 15-0.30  ms  for  UT1-UTC. 

(For  another  general  overview  of  the  GPS,  see  Archinal  and  Mueller  (1986). 
More  detailed  information  is  also  available  in  Chapter  3  and  in  Remondi  (1984), 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  261 

Goad  (1985),  Applied  Research  Laboratories  (1986),  Institute  of  Navigation  (1980, 
j984),  and  Physical  Sciences  Laboratory  (1989).) 

A  similar  system,  known  as  the  Global  Navigation  Satellite  System  (GLONASS), 
is  also  under  development  by  the  former  republics  of  the  USSR.  It  consisted  of  10  to 
12  satellites  by  the  end  of  1990,  and  24  satellites  sometime  in  the  period  1991-1995. 
Its  primary  purpose  will  be  for  worldwide  aircraft  navigation,  but  it  is  also  planned 
to  be  used  by  naval  and  fishing  fleets  as  well.  The  system  is  in  reality  very  closely 
patterned  after  the  GPS,  with  the  primary  exception  that  each  satellite  will  trans- 
mit different  L-band  frequencies  (rather  than  just  using  different  codes  as  the  GPS 
satellites  do).  The  receiver  hardware,  therefore,  will  have  some  differences  from  that 
of  GPS  receivers;  however,  some  current  receivers  are,  and  it  is  likely  many  future 
ones  will  be,  able  to  receive  and  process  signals  from  either  system.  Some  additional 
details  on  this  system  are  presented  in  Anodina  and  Prilepin  (1989). 


4.442  Laser-Ring  Gyroscopes  Another  more  exotic  method  for  determining  vari- 
ations in  the  Earth's  rotation  has  also  been  proposed.  If  a  laser  beam  is  split  and 
sent  in  opposite  directions  around  a  given  path  on  the  Earth's  surface,  the  light  can 
be  made  to  interfere  with  itself  upon  meeting  again.  Changes  in  this  interference 
pattern  will  occur  because  of  changes  in  the  Doppler  shift  of  the  light  traversing 
the  two  different  paths,  due  to  variations  in  the  Earth's  rotation.  Such  a  device  is 
known  as  a  "laser  ring"  or  "Sagnac  laser"  gyroscope  (Soffel  et  al.,  1988).  Although 
theoretically  it  might  be  able  to  provide  usable  Earth  rotation  data,  in  practice  the 
stability  of  the  platform  on  which  the  laser  light  is  directed  seems  to  be  a  limiting 
factor,  because  of  changes  in  light  paths  due  to  vibrations,  microearthquakes,  etc. 
Such  a  device  (covering  a  58-m2  area)  is  currently  undergoing  testing  and  upgrad- 
ing, with  reported  accuracies  of  10_s  over  averaging  times  on  the  order  of  a  day, 
and  a  predicted  theoretical  accuracy  of  a  few  parts  in  10~10  with  averaging  times 
of  a  few  seconds  (Rotge  et  al.,  1985). 


4.443  Superfluid  Helium  Interference  Gyroscopes  The  use  of  superfluid  helium 
interference  gyroscopes  (SHIG)  has  just  recently  been  proposed  for  the  determi- 
nation of  Earth  rotation  and  polar  motion  (Packard,  1988).  It  involves  the  use  of 
a  small  (less  than  1-meter  diameter)  horizontal  torus  of  superfluid  helium  (3He  or 
He),  in  which  a  blockage  with  a  pinhole  is  positioned.  When  this  torus  undergoes 
rotation  (for  example,  because  of  the  rotation  of  the  Earth),  it  should  be  possi- 
ble to  measure  the  phase  difference  or  phase  slips  across  the  blockage  (Avenel  and 
Varoguaux,  1988).  This  in  turn  is  proportional  to  the  rotational  velocity  of  the 
torus  and  therefore  the  Earth,  and  could  be  measured  to  1  part  in  109  over  a  few 
seconds.  Of  course  technical  problems  still  exist  in  building  such  a  device,  such  as 


262  EXPLANATORY  SUPPLEMENT 

(a)  building  a  pinhole  diaphragm  of  very  small  aperture  (0.1  fi  holes  are  needed), 
and  (b)  stabilizing  the  instrument  or  determining  its  tilt  with  respect  to  the  local 
vertical  (i.e.,  its  connection  to  the  Earth)  with  the  accuracy  needed  (changes  of 
10-9  meters  in  tilt  would  be  significant  across  a  1-meter  instrument).  If  they  can 
successfully  be  built,  however,  two  or  more  of  this  type  of  instrument,  as  with  the 
laser-ring  gyroscopes,  would  provide  high-speed  determinations  of  LOD  and  polar 
motion  independent  from  astronomical  observations. 


4.45    International  Services 


On  1988  January  1,  the  International  Earth  Rotation  Service  (IERS)  began  op- 
eration, under  the  auspices  of  the  IAU  and  the  IUGG.  It  replaced  the  Bureau 
International  de  l'Heure  (BIH)  and  the  International  Polar  Motion  Service  (IPMS) 
as  the  organization  responsible  for  determining  and  predicting  the  orientation  of  the 
Earth.  The  IERS  consists  of  a  board  of  directors  that  oversees  a  "central  bureau" 
and  "coordinating  centers"  for  each  observational  technique  and  "sub-bureaus"  for 
special  purposes.  Further,  each  technique  may  have  several  "computational  centers" 
actually  responsible  for  processing  data  and  ERP  series  that  are  then  collected, 
used,  and  distributed  by  the  Central  Bureau. 

The  IERS  publishes  two  different  primary  bulletins  for  the  dissemination  of 
Earth-rotation  data  as  determined  from  the  combination  of  data  from  different 
observational  techniques.  The  IERS  Bulletin  A  provides  information  weekly  on 
the  rapid  determination  of  the  Earth's  rotation,  as  well  as  predictions  for  future 
rotation.  The  IERS  Bulletin  B  provides  "final"  smoothed  data  monthly  on  the 
rotation  of  the  Earth.  Of  course,  other  organizations  both  within  and  outside  the 
IERS  also  provide  other  ERP  series,  usually  based  on  observational  data  of  a  given 
type. 

The  IERS  is  also  responsible  for  deciding  when  a  step  in  UTC  is  necessary  in 
order  to  keep  it  within  0.7  s  of  UT1.  These  steps,  commonly  known  as  leap  seconds, 
may  be  positive  or  negative,  are  of  1  second  duration,  are  announced  at  least  8 
weeks  ahead  of  time,  and  may  be  inserted  at  the  end  of  any  month  (preferably, 
and  in  practice,  at  the  end  of  June  or  December)  (BIH,  1972,  pp.  A-ll  to  A-14). 
Since  their  introduction  in  1972,  these  steps  have  always  been  positive,  and  have 
been  required  from  every  6  months  to  2  years.  A  table  of  these  steps  is  given  in  the 
current  Astronomical  Almanac,  p.  K9,  as  differences  of  UTC  from  TAI. 


4.451  IERS  Bulletin  A  The  IERS  Bulletin  A  is  published  by  the  National  Earth 
Orientation  Service  (NEOS),  a  joint  activity  of  the  U.S.  Naval  Observatory  and  the 


4 1  t£Rrestrial  coordinates  and  the  rotation  of  the  earth  263 

National  Geodetic  Survey  of  the  United  States.  The  NEOS  acts  as  a  sub-bureau 
0f  the  IERS.  The  IERS  Bulletin  A  is  issued  by  0  hours  UT,  Friday,  of  each  week, 
and  contains  Earth  rotation  parameters  determined  from  the  combination  of  other 
recently  determined  ERP  series,  predictions  of  Earth  rotation  parameters  daily  for 
Up  to  90  days  in  the  future,  predictions  of  Earth  rotation  parameters  monthly  up 
to  one  year  in  the  future,  and  equations  for  predictions  even  further  into  the  future. 
Other  miscellaneous  data  and  information  are  also  available,  such  as  the  ERP  de- 
termined from  observations  being  used  in  the  combined  solution,  plots  of  current 
polar  motion  and  UT1— UTC  values,  values  of  TAI— UTC,  DUT1,  announcements 
of  leap  seconds,  etc.  For  the  combined  ERP  series,  data  given  includes  for  each 
day:  the  calendar  date  and  modified  Julian  date  (MJD);  the  values  of  xp,  yp,  and 
their  expected  accuracies  in  arcseconds;  and  the  values  of  UTl^UTC  and  their 
expected  accuracies  in  seconds  of  time.  Values  are  usually  given  for  approximately 
a  week's  worth  of  data.  When  available,  new  values  from  the  IERS  Bulletin  B  are 
also  published.  Predictions  are  given  for  each  day  for  90  days  past  the  end  of  the 
combined  data,  consisting  of  the  calendar  date  and  MJD,  values  of  xp  and  yp  in 
arcseconds,  UT1— UTC  in  seconds,  and  a  table  giving  estimated  accuracies  of  these 
values.  Equations  are  also  provided  in  order  to  extend  these  predictions  even  fur- 
ther. Similar  predictions  are  given  for  the  first  day  of  each  month  for  one  year  in 
the  future.  Predicted  celestial  pole  offsets  (corrections  to  Aip  and  Ae)  are  also  given 
for  each  day  for  90  days  in  the  future. 

The  combined  series  being  published  is  actually  formed  at  the  U.S.  Naval  Ob- 
servatory, using  ERP  series  based  on  LLR,  SLR  to  LAGEOS,  and  VLBI  data.  The 
individual  series  in  use  are  provided  by  the  Department  of  Astronomy  at  the  Univer- 
sity of  Texas  (UTX)  using  LLR  data;  the  Center  for  Space  Research  at  UTX  and  the 
Technical  University  of  Delft  for  SLR  to  LAGEOS  data;  and  the  National  Geodetic 
Survey  and  the  U.S.  Naval  Observatory  for  VLBI  data.  Each  series  has  systematic 
errors  removed  from  each  of  its  available  components  (xp,  yp,  and  UT1— UTC).  A 
spline  curve  fitted  through  each  of  the  components  is  used  to  determine  the  one- day 
values  for  each  component.  Accuracy  estimates  for  each  input  series  are  estimated 
periodically  via  intercomparisons  of  the  series.  The  long-term  biases  and  trends  are 
adjusted  on  an  annual  level  to  those  of  the  series  published  in  the  IERS  Bulletin 
B.  The  predictions  for  xp  and  yp  are  done  from  a  least-squares  solution  using  the 
last  two  years  of  data.  The  predictions  for  UT1-UTC  are  computed  using  a  model 
based  on  the  last  365  days  of  data.  A  complete  description  of  the  combination  and 
prediction  technique  is  given  in  NEOS  (1989)  and  McCarthy  and  Luzum  (1990). 

All  of  the  IERS  Bulletin  A  information  is  also  available  on  the  "Automated 
Data  Service"  of  the  U.S.  Naval  Observatory,  and  from  the  Arpanet,  BITNET,  In- 
ternet, G.E.  Mark  III,  and  SPAN  electronic  networks.  For  further  information,  or  to 
b'1  placed  on  the  mailing  list  for  the  IERS  Bulletin  A,  contact:  National  Earth  Ori- 
entation Service,  Earth  Orientation  Parameters  Division,  U.S.  Naval  Observatory, 
Washington,  D.C.  20392. 


264  EXPLANATORY  SUPPLEMENT 

4.452  IERS  Bulletin  B  The  IERS  Bulletin  B  is  published  by  the  Central  Bureau 
of  the  IERS,  located  at  the  Paris  Observatory  in  Paris,  France.  It  is  issued  during  the 
first  week  of  each  month,  and  contains  final  ERP  values  from  a  combination  solution 
of  a  month's  or  more  ERP  series  data,  more  recent  ERP  values  and  predictions  as 
available  from  the  IERS  Bulletin  A,  along  with  information  on  the  length  of  day 
(LOD)  and  ERP  series  data  used  in  the  combined  solution.  The  final  values,  given 
for  every  5  days,  include  the  calendar  date  and  MJD,  smoothed  values  of  xp  and 
yp  in  arcseconds,  UT1R-UTC  and  UT1R-TAI  in  seconds,  and  raw  values  of  xp 
and  yp  in  arcseconds,  and  UT1-UTC  in  seconds.  Following  this  are  some  of  the 
rapid  service  and  prediction  values  from  IERS  Bulletin  A  in  the  same  format.  These 
values  are  also  interpolated  daily  and  given  with  the  calendar  date  and  MJD,  x 
and  yp  in  arcseconds,  UTl-UTC,  UTl-TAI,  UTl-UTlR  and  the  excess  length 
of  day  ("D")  in  seconds.  Smoothed  values  of  "D"  and  the  rotational  velocity  of  the 
Earth  in  microradians/second  are  also  given  for  every  5  days. 

The  final  values  ("raw"  above)  are  computed  for  every  5  days,  using  data  from 
various  observational  ERP  series  as  input.  The  input  series  are  the  same  as  those 
listed  for  the  IERS  Bulletin  A,  with,  in  addition,  series  obtained  from  JPL  VLBI 
observations  also  being  used.  The  values  are  then  smoothed  using  a  "Vondrak" 
filter  (Vondrak,  1969).  The  values  of  UTl-UTC  are  also  corrected  for  variations 
due  to  zonal  Earth  tides  with  periods  up  to  35  days,  giving  UTlR-UTC.  The 
values  are  referred  to  the  IERS  Terrestrial  System,  which  is  identical  to  the  earlier 
BIH  Terrestrial  System,  with  the  BIH  origin  having  been  adjusted  to  the  CIO  in 
1967  and  maintained  independently  since  then.  This  series  is  also  a  direct  extension 
of  the  BIH  Circular  D  series,  which  ended  on  December  31,  1987. 

All  of  this  information  is  also  available  from  the  G.E.  Mark  III  and  the  EARN/ 
BITNET  electronic  networks.  For  further  information,  or  to  be  placed  on  the  mail- 
ing list  for  the  IERS  Bulletin  B,  contact:  Central  Bureau  of  the  IERS  (IERS/CB), 
Observatoire  de  Paris,  61,  Avenue  de  l'Observatoire,  75014  Paris,  France. 


4.453    Other  Publications  of  the  IERS    Other  publications  of  the  IERS  include: 

Special  Bulletin  C — Issued  irregularly  to  announce  upcoming  steps  (leap  sec- 
onds) in  UTC. 

Special  Bulletin  D — Issued  irregularly  to  announce  upcoming  changes  to  the 
value  of  DUT1  to  be  transmitted  with  time  signals. 

Annual  Report  of  the  IERS — Issued  annually  from  1989  June  on,  reporting  on 
various  solutions  for  Earth  orientation  parameters  and  terrestrial  and  celestial 
reference  systems. 

Technical  Notes  of  the  IERS — Issued  irregularly  as  reports  and  complemen- 
tary information  of  relevance  to  the  work  of  the  IERS  on  Earth  rotation  and 
related  reference  systems. 


/  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  265 

For  further  information,  contact  the  Central  Bureau  of  the  IERS  at  the  address 
given  in  Section  4.452. 

4  5   DETERMINATION  OF  PAST  VARIATIONS  IN  LENGTH  OF  DAY 
AND  THE  POSITION  OF  THE  POLE 

The  determination  of  historical  variations  in  the  rotational  rate  of  the  Earth  has 
been  a  topic  of  discussion  since  the  latter  part  of  the  nineteenth  century,  when  such 
variations  were  first  suspected.  Most  of  the  research  in  this  area  has  centered  on  the 
use  of  ancient  astronomical  observations  of  eclipses  and  telescopic  observations  of 
lunar  occultations,  in  order  to  determine  At,  the  difference  between  Earth  rotational 
time  (UT1)  and  dynamical  time  (TDT  or  formerly  ET).  The  time  derivative  of  this 
value  is  the  length  of  day  (LOD).  A  summary  of  recent  work  in  this  area  will  be 
presented  along  with  some  current  results. 

In  addition,  available  results  on  historical  variations  in  polar  motion  are  pre- 
sented. However,  since  these  variations  do  not  result  in  a  cumulative  effect  as  they 
do  with  UT1,  older  measurements  of  these  variations  are  based  entirely  on  precise 
telescopic  observations  and  so  can  only  be  extended  back  to  the  mid-nineteenth 
century  with  any  degree  of  continuity. 


4.51    Historical  Variations  in  UT1  and  Length  of  Day 

Since  studies  by  Newcomb  (1882,  p.  465)  indicated  that  measurements  of  the  tran- 
sits of  Mercury,  the  Moon,  and  Jupiter's  satellites  all  showed  similar  variations 
possibly  related  to  the  Earth's  rotation,  many  studies  and  papers  have  been  un- 
dertaken to  determine  more  accurately  these  variations  over  time.  However,  these 
studies  have  been  complicated  by  their  dependence  on  the  position  of  the  Moon 
(during  eclipses  or  occultations),  and  hence  on  whether  there  has  ever  been  any 
change  in  the  acceleration  of  the  Moon's  mean  motion  (h)  (and  effectively,  then, 
any  change  in  the  rate  of  ET  determinations  based  on  the  Moon's  motion).  Many 
studies  of  this  problem  that  have  been  undertaken  up  until  the  1970s  attempted 
to  solve  simultaneously  for  h  and  At.  An  example  of  this  type  of  approach  is  that 
by  Newton  (1970).  However,  h  can  be  assumed  constant,  an  assumption  that  seems 
to  be  supported  by  modern  astronomical  observations  (including  radar  and  LLR 
measurements)  of  the  Moon.  Many  studies  during  the  1970s  and  1980s  have  been 
undertaken  with  this  assumption  as  their  basis.  The  most  complete  current  ref- 
erences on  historical  UT1  and  LOD  variations  (with  n  assumed  constant)  are  by 
Stephenson  and  Morrison  (1984),  and  McCarthy  and  Babcock  (1986)  from  which 
much  of  the  material  presented  here  is  derived.  The  results  presented  in  both  of  these 
references  agree  well,  with  differences  due  only  to  slightly  different  data  sources  and 


266  EXPLANATORY  SUPPLEMENT 

different  degrees  of  smoothing  before  1861  (McCarthy,  personal  communication). 
Some  newer  results  are  also  available  in  Stephenson  and  Lieske  (1987). 

The  results  can  conveniently  be  considered  by  examining  various  historical  pe- 
riods separately,  based  upon  the  type  of  observations  being  considered.  The  specific 
periods  to  be  mentioned  here  will  include  (working  backward)  1980-present,  1955- 
1980,  1620-1954,  700-1600,  and  700  B.C.-A.D.  200.  Observations  also  exist  for  the 
period  A.D.  200-700,  but  have  not  yet  become  available  (in  published  form).  For 
example  Hilton  et  al.  (1989)  report  At  values  determined  from  58  occupations  of 
planets  by  the  Moon  observed  by  the  Chinese  in  the  period  68  B.C.  to  A.D.  575. 

Extended  details  of  the  methods  for  the  determinations  of  UTl  and  LOD  will 
not  be  presented  here.  For  further  information  on  the  methods  used  when  consid- 
ering lunar  occultation  data,  Morrison  (1979b)  may  be  consulted.  Descriptions  of 
how  eclipse  data  were  used  are  presented  in  Stephenson  and  Morrison  (1984)  along 
with  many  additional  references  on  data  sources.  Other  chapters  here  may  also 
be  consulted.  Current  methods  for  observing  UTl  (since  1980)  are  fully  described 
earlier  (in  Section  4.5). 

Observations  of  UTl  from  1955  to  1980  are  unique  in  that  they  can  be  refer- 
enced to  TDT,  due  to  the  advent  of  the  first  atomic  time  standards  in  the  1950s. 
However,  since  mostly  optical  techniques  and  then  developing  space-based  tech- 
niques were  in  use,  the  accuracy  levels  were  an  order  of  magnitude  lower  than  at 
the  present  time.  Determinations  by  the  BIH  provide  the  best  results  from  1963- 
1980  (originally  in  the  form  of  TAI-UTl,  with  TAI  different  from  TDT  only  by 
an  additive  constant  to  TAI  of  32.184s).  McCarthy  and  Babcock  (1984)  present 
the  most  accurate  available  results  during  the  period  1956-1962,  based  on  USNO 
Photographic  Zenith  Tube  (PZT)  observations  of  UTl,  as  referenced  to  the  USNO 
atomic  timescale  A.l  (which  is  different  from  TDT  only  by  an  additive  constant  to 
A.l  of  32.150s). 

The  period  of  1620  to  1955  covers  substantially  the  period  where  telescopic 
observations  may  be  used  in  determinations  of  UTl.  Lunar  occultations  alone  pro- 
vide fairly  precise  values  from  1861  to  1954  as  described  by  Morrison  (1979a).  The 
sparseness  of  such  observations  before  that  time  results  in  some  difficulties  in  re- 
covering UTl.  Results  from  occultations  and  now  also  eclipses  are  fitted  with  cubic 
splines  in  order  to  obtain  a  continuous  series  of  values.  Beyond  Stephenson  and 
Morrison's  1984  treatment,  part  of  this  period  (1672-1806)  has  been  reconsidered 
with  newly  available  solar  eclipse  timings  by  Stephenson  and  Lieske  (1987). 

The  "medieval  period"  of  700-1600  refers  to  the  general  period  from  timed 
Arabian  eclipse  observations  and  other  untimed  observations  until  the  invention  of 
the  telescope.  During  this  period,  a  single  "curve"  of  values  for  At  may  no  longer 
be  estimated.  One  may  only  set  limits  on  the  values  at  sporadic  epochs  during 
the  period.  The  timed  Arabian  observations  actually  ran  from  approximately  A.D. 
800  to  1000,  with  the  timings  made  by  measuring  the  altitude  of  the  Moon  or  a 


i  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 

Length  of  day — 86400  seconds 


267 


6 
4 

I 

O 

8  -0 
m 

3  .2 
I 

-4 
-6 


r 

- 

/A 

jr   f  " 

V  ' 

"  1 

— i  

1600 


1700 


1800 

Year 


1900 


2000 


Figure  4.5L1 

Length  of  day  from  1656  to  IS 


clock  star.  The  untimed  observations  were  made  largely  from  Europe,  usually  in 
nonastronomical  works. 

"Ancient"  observations  during  the  period  circa  700  B.C.  to  A.D.  200  are  of  a 
rather  limited  number,  but  in  some  cases  are  quite  useful.  Stephenson  and  Morrison 
(1984)  have  been  able  to  use  (a)  5  Chinese  sightings  of  total  and  near  total  eclipses 
between  198  B.C.  and  A.D.  120);  (b)  a  Babylonian  observation  of  atotal  solar  eclipse 
in  136  B.C.;  (c)  "timed"  (possibly  with  water  clocks)  Babylonian  observations  of 
lunar  eclipses;  and  (d)  20  Babylonian  records  indicating  that  the  Moon  rose  or  set 
while  eclipsed. 

As  a  summary  of  the  preceding  results,  graphs  of  At  are  presented  in  Figures 
4.51.1-4.51.3.  Figure  4.51.1.  presents  a  curve  of  At  vs  time  for  the  recent  historical 
period  of  1656  to  the  present,  after  McCarthy  and  Babcock  (1985)  with  recent 
values  from  the  IERS  Rapid  Service  Sub-Bureau.  The  determinations  of  At  by 
Stephenson  and  Morrison  (1984)  from  isolated  observations  are  presented  for  the 
Period  A.D.  700  to  1600  in  Figure  4.51.2,  and  for  the  period  700  B.C.  to  A.D.  200  in 
Figure  4.51.3.  Finally,  their  logarithmic  plot  of  Ar  is  presented  for  700  B.C.  to  A.D. 
1980  in  Figure  4.51.4.  The  current  Astronomical  Almanac  also  contains  a  table  of 
At  values  for  the  period  1620.0  to  the  present. 


T 


timed  lunar 
+  and  solar 
eclipses. 

T  untirned  solar 

eclipse 
f  observations 


800 


1000 


1200 


1400 


1(500 


Figure  4.51.2 

At  from  a.d.  700  to  1600 


o 


St 
< 


•  timed  lunar 

0  observations 

untimed 
solar  eclipse 
observations 

T  untimed  lunar 

1  eclipse 

I  observations 


•  0 

;  coo 


Si  ! 


r 


i  i 


-600 


-400 


-200 


year 


200 


Figure  4.51.3 

At  from  700  B.c,  to  A.d.  200 


TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 


269 


-1000  0  1000  2000 

year 

Figure  4.51.4 

log  At  from  700  B.C.  to  A.D.  1980  (30  seconds  have  been  added  to  each  value  to  make  them  all  positive. 
The  continuous  line  shows  the  computed  tidal  deceleration  of  the  Earth.) 


4.52   Historical  Variations  in  Polar  Motion 

The  advent  of  the  International  Latitude  Service  in  the  1890s  brought  about  moni- 
toring of  polar  motion  that  has  continued  to  this  day.  However,  except  for  sporadic 
periods  during  the  nineteenth  century,  little  data  on  polar  motion  exists  before  that 
time. 

Extremely  high-precision  polar-motion  data,  as  with  UT1  data,  exists  only  from 
1980  on,  with  the  introduction  of  the  space-based  geodetic  techniques  discussed  in 
Section  4.4.  The  recent  motion  of  the  pole  is  presented  in  Figure  4.52.1,  using  values 
Provided  by  the  IERS  Rapid  Service  Sub-Bureau. 

High-accuracy  polar-motion  data,  based  on  large  numbers  of  optical  astrometric 
instruments  became  available  just  prior  to  the  formation  of  the  International  Polar 
Motion  Service  in  1962.  Doppler  satellite  tracking  data  also  began  providing  polar- 
motion  information  in  the  late  1960s,  and  was  in  use  by  the  BIH  by  the  early  1970s. 


270 


EXPLANATORY  SUPPLEMENT 


Polar  motion 


-.4 


-.2- 


ti 


■4 


.0- 


.2- 


I  1  meter 

v  1990 

I        1  (U981  1 

 1  1  

1 

.5  .3 
y  (sec.  of  arc) 


-.1 


Figure  4.52.1 

Polar  motion,  1980  September  28  to  1990  July  27  (triangles  mark  the  beginning  of 
each  year) 


This  type  of  data  still  continues  to  be  available  until  the  present  day,  but  has  been 
superseded  in  accuracy  by  the  newer  techniques. 

The  stations  of  the  ILS  provided  monitoring  of  polar  motion  from  September 
of  1899  until  1987.  A  complete  and  rigorous  rereduction  of  all  of  the  ILS  data 
from  1899.9  until  1979.0  is  described  and  reported  by  Yumi  and  Yokoyama  (1980). 
Figure  4.52.2,  showing  the  X  and  Y  values  versus  time  during  that  period,  is  taken 
from  Figure  8  of  that  publication.  Fedorov  et  ai  (1972)  also  present  polar-motion 
results  from  1890.0  to  1969.0. 

Before  1900,  data  that  can  be  used  for  polar-motion  determination  are  quite 
sporadic.  All  such  data  are  based  on  short  observation  campaigns,  usually  at  one 
station,  and  although  some  observers  were  in  fact  looking  for  polar  motion,  most 
of  the  observations  were  transit-circle  or  visual  zenith  instrument  observations  be- 
ing used  to  determine  star  positions  and/or  time.  Polar-motion  data  are  available 
from  the  previously  mentioned  work  by  Fedorov  et  al.  from  1890.0  to  1900.0.  Cov- 
ering a  more  lengthy  period  during  the  nineteenth  century,  specifically  during  the 
period  1846-1891.5,  is  the  study  by  Rykhlova  (1969).  Figure  4.52.3  shows  the  polar- 
motion  results  during  that  period.  Surprisingly,  one  of  the  other  few  discussions  of 
polar-motion  data  before  1900  is  that  of  Chandler  himself  (1891,  1892).  Using  data 


0.6 


ILS  polar  motion  in  y 


Figure  4.52.2 

X  and  Y  components  of  polar  motion  from  the  ILS.  1 899.9  to  1979.0 


dating  from  1863  to  1885  from  various  observatories,  he  demonstrated  decisively 
the  existence  of  the  motion  now  known  as  the  Chandler  wobble.  Chandler  actually 
considered  data  over  the  entire  period  1726  (from  Bradley)  to  1890,  which  indicated 
large  changes  were  occurring  in  the  length  of  the  Chandler  period.  These  changes 
are  usually  considered  to  be  artifacts  of  the  sparse  low-precision  data  in  use. 


ml)  U  tS  SI  St  S!  S3  St  sTsl  ST  k  S3  SO  Si  K  S3  «  SS  ii  S7  Si  SI  W  71  ?2  V  »  ff  »  «  7t  ?!  SS  81  SI  t3  ft  Si  16  17  X  ti  w 


Figure  4.52.3 

X  and  Y  components  of  polar  motion,  1 846.0  to  1 891 .5 


272 


EXPLANATORY  SUPPLEMENT 


4.6  REFERENCES 

Abbot,  R.I.,  King,  R.W.,  Bock,  Y.,  and  Counselman  III,  C.C.  (1988).  "Earth  Rotation 
from  Radio  Interferometric  Tracking  of  GPS  Satellites,"  in  Babcock  and  Wilkins, 
1988,  209-213. 

Agnew,  D.C.  (1983).  "Conservation  of  Mass  in  Tidal  Loading  Computations"  Geophys.  J. 
Roy.  Astron.  Soc.  72,  321-325, 

Alley,  CO.  (1983).  "L  aser  Ranging  to  Retro-Reflectors  on  the  Moon  as  a  Test  of  Theo- 
ries of  Gravity"  in  Quantum  Optics,  Experimental  Gravity,  and  Measurement  Theory 
(Plenum,  New  York,  NY),  431. 

Applied  Research  Laboratories  (1986).  Proceedings  of  the  Fourth  International  Symposium 
on  Satellite  Positioning  (ARL,  University  of  Texas,  Austin). 

Anodina,  T.G.  and  Prilepin,  M.T.  (1989).  "The  GLONASS  System"  in  Physical  Science 
Laboratory,  1989,  1,  13-18. 

Archinal,  B.  and  Mueller,  I.I.  (1986).  "GPS  An  Overview"  Professional  Surveyors,  no.  3, 
7  11. 

Arias,  E.F.,  Feissel,  M.,  and  J.-F.  Lestrade  (1988).  "An  Extragalactic  Celestial  Reference 
Frame  Consistent  with  the  BIH  Terrestrial  System  (1987),"  in  BIH  1988,  D-113  to 
D-121. 

Armstrong,  N.  (1977).  Foreword  to  Mulholland  1977,  xiii-xiv. 

Arnold,  K.  (1974),  "Geodetic  Aspects  of  Laser  Distance  Measurements  to  the  Moon  and 
Radio-Interference  Measurements  to  Quasars"  Gerlands  Beitr.  Geophysik  83,  no.  4, 
249-269. 

The  Astronomical  Almanac  (1990).  (U.S.  Government  Printing  Office,  Washington,  DC), 

Avenel,  O.,  and  Varoquaux,  E.  (1988).  "Josephson  Effect  and  Quantum  Phase  Slippage 
in  Superfluids"  Physical  Review  Letters  60,  no.  5,  416-419. 

Babcock,  A.K.  and  Wilkins,  G.,  eds.  (1988).  The  Earth's  Rotation  and  Reference  Frames 
for  Geodesy  and  Geodynamics  IAU  Symposium  128  (Khiwer,  Dordrecht,  Holland), 

BIH  (1973).  BIH  Annual  Report  for  1972  (BIH,  Paris  Observatory,  Paris,  France). 

BIH  (1989).  BIH  Annual  Report  for  1988  (BIH,  Paris  Observatory,  Paris,  France). 

Bock,  Y.  (1980).  "A  VLBI  Variance-Covariance  Analysis  Interactive  Computer  Program" 
Dept.  of  Geodetic  Science  Report  298  (Ohio  State  University,  Columbus,  OH). 

Bomford,  G.  (1971).  Geodesy,  3rd  ed.  (Oxford  University  Press,  London,  UK). 

Borkowski,  K.M.  (1989).  "Accurate  Algorithms  to  Transform  Geocentric  to  Geodetic  Co- 
ordinates" Bulletin  Geodesique  63,  no.  1,  50-56, 

Boucher,  C.  and  Altamimi,  Z.  (1989).  "The  Initial  IERS  Terrestrial  Reference  Frame" 
IERS  Technical  Note  1  (IERS,  Paris,  France). 

Brosche,  P.,  Seiler,  U.,  Suendermann,  J.,  and  Wuensch,  J.  (1989).  "Periodic  Changes  in 
Earth's  Rotation  due  to  Oceanic  Tides"  Astronomy  and  Astrophysics  220,  318-320. 

Carter,  W.E.  and  Robertson,  D.S.  (1984).  "IRIS  Earth  Rotation  and  Polar  Motion  Re- 
sults" in  Proc.  Int.  Symposium  Space  Techniques  for  Geodynamics  Vol.  1  J.  Somogyi 
and  C.  Reigber,  eds.,  (Hungarian  Academy  of  Sciences,  Sopron,  Hungary),  pp.  214- 
222. 

Carter,  W.E.,  Robertson,  D.S.,  Pettey,  J.E.,  Tapley,  B.D.,  Shutz,  B.E.,  Eanes,  R.J.,  and 
Lufeng,  M.  (1984).  "Variations  in  the  Rotation  of  the  Earth"  Science  224,  957-961. 

Cartwright,  D.E.  and  Edden,  A.C.  (1973).  "Corrected  Tables  of  Tidal  Harmonics"  Geo- 
phys. J.  Roy.  Astron.  Soc.  33,  253-264. 


TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 


273 


Cartwright,  D.E.  and  Tayler,  R.J.  (1971).  "New  Computations  of  the  Tide-Generating 
Potential"  Geophys.  J.  Roy.  Astron.  Soc,  23,  45-74. 

Chandler,  S.C.  (1891).  "On  the  Variation  of  Latitude"  The  Astronomical  Journal  11,  83, 

Chandler,  S.C.  (1892).  "On  the  Variation  of  Latitude"  The  Astronomical  Journal  12,  17. 

Chapman,  S.  and  Lindzen,  R.  (1970).  Atmospheric  Tides  (D.  Reidel,  Dordrecht,  Holland). 

Clark,  T.A.,  Corey,  B.E.,  Davis,  J.L.,  Elgered,  G.,  Herring,  T.A.,  Hinteregger,  H.F., 
Knight,  C.A.,  Levine,  J.I.,  Lundqvist,  G.,  Ma,  C,  Nesman,  E.F.,  Phillips,  R.B., 
Rogers,  A.E.E.,  Ronnang,  B.O.,  Ryan,  J.W.,  Schupler,  B.R.,  Shaffer,  D.B.,  Shapiro, 
I.I.,  Vandenberg,  N.R.,  Webber,  J.C.,  and  Whitney,  A.R.  (1985).  "Precision  Geodesy 
Using  the  Mark-Ill  Very-Long-Baseline  Interferometer  System"  IEEE  Trans,  on 
Geosci.  and  Rem.  Sens.  GE-23,  4,  438-449. 

Coates,  R.J.,  Frey,  H.,  Mead,  G.D.,  and  Bosworth,  J.M.  (1985).  "Space-Age  Geodesy:  The 
NASA  Crustal  Dynamics  Project"  IEEE  Trans,  on  Geosci.  and  Rem.  Sens.  GE-23, 
4,  360-368. 

Cohen,  S.C,  King,  R.W.,  Kolenkiewicz,  R,,  Rosen,  R.D.,  and  Schutz,  B.E.,  eds.  (1985). 
"LAGEOS  Scientific  Results"  special  issue  of  Journal  of  Geophysical  Research  90, 
Bll,  9215-9438. 

Degnan,  J.  (1985).  "Satellite  Laser  Ranging:  Current  Status  and  Future  Prospects"  IEEE 
Trans,  on  Geosci.  and  Rem.  Sens.  GE-23,  4,  398-413. 

DeMets,  C,  Gordon,  R.G.,  Argus,  D.F.,  and  Stein,  S.  (1990),  "Current  Plate  Motions" 
Geophys.  J.  Int.  101,  425-478. 

Department  of  the  Army  (1958).  Universal  Polar  Stereographic  Grid  TM  5-241-9  (De- 
partment of  the  Army,  Washington,  DC). 

Department  of  the  Army  (1973).  Universal  Transverse  Mercator  Grid  TM  5-241-8  (De- 
partment of  the  Army,  Washington,  DC). 

DMA  (1987).  Supplement  to  Department  of  Defense  World  Geodetic  System  1984  Tech- 
nical Report  DMA  TR  8350. 2-A  (Defense  Mapping  Agency,  U.S.  Naval  Observatory, 
Washington,  DC). 

Doodson  (1921).  Proc.  R.  Soc.  A.  100,  305-329. 

Eanes,  R.J.,  Schutz,  B.,  and  Tapley,  B.  (1983).  "Earth  and  Ocean  Tide  Effects  on  LAGEOS 
and  Starlette"  Proceedings  of  the  Ninth  International  Symposium  on  Earth  Tides  (E. 
Schweizerbartsche  Verlag  Buchhandtung,  Stuttgart). 

Farrell,  W.E.  (1972).  "Deformation  of  the  Earth  by  Surface  Loads"  Rev.  Geophys.  Space 
Phys.  10,  761-797. 

Fedorov,  E.P.,  Korsun,  A. A.,  Mayor,  S.P.,  Panchenko,  N.I.,  Taradii,  V.K.,  and  Yatskiv, 
Y.S.  (1972).  The  Motion  of  the  Pole  of  the  Earth  from  1890.0  to  1969.0  (Ukrainian 
Academy  of  Sciences,  Naukova  Dumka,  Kiev,  USSR). 

Gilbert,  F.  and  Dziewonski,  A.M.  (1975).  "An  Application  of  Normal  Mode  Theory  to 
the  Retrieval  of  Structural  Parameters  and  Space  Mechanisms  from  Seismic  Spectra" 
Phil  Trans.  R.  Soc.  of  Land.  A278,  187-269. 

Goad,  C.C.  (1980).  "Gravimetric  Tidal  Loading  Computed  from  Integrated  Green's  Func- 
tions" J.  Geophys.  Res.  85,  2679-2683. 

Goad,  Clyde  (ed.)  (1985).  Proceedings  of  the  First  International  Symposium  on  Precise  Po- 
sitioning with  the  Global  Positioning  System  (National  Geodetic  Information  Center, 
NOAA,  Rockville,  MD). 

GSFC  (1976).  Mathematical  Theory  of  the  Goddard  Trajectory  Determination  System  X- 
582-76-77  (GSFC,  Greenbelt,  MD), 

Heiskanen,  W.  and  Moritz,  H.  (1967).  Physical  Geodesy  (W.H.  Freeman,  San  Francisco, 
CA). 


274 


EXPLANATORY  SUPPLEMENT 


Hilton,  J.L.,  Seidelmann,  P.K.,  and  L.  Ciyuan  (1989).  "Chinese  Records  of  Lunar  Occul- 
tations  of  the  Planets"  Bull,  of  Am.  Ast.  Soc.  21,  no.  4,  1153.  Abstract  only. 

IAU  (1983).  "Proceedings  of  the  Eighteenth  General  Assembly  Patras  1982"  Trans  of  the 
I  A  V  18B  (Reidel,  Dordrecht,  Holland). 

IERS  (1988).  IERS  International  Earth  Rotation  Service  (U.S.  Naval  Observatory,  Wash- 
ington, DC). 

IERS  (1989).  An  Explanatory  Supplement  to  the  IERS  Bulletins  A  and  B  {IERS,  U.S. 

Naval  Observatory,  Washington,  DC). 
Institute  of  Navigation  (1980).  Global  Positioning  System  (The  Institute  of  Navigation 

Washington,  DC). 

Institute  of  Navigation  (1984).  Global  Positioning  System  Volume  II  (The  Institute  of 
Navigation,  Washington,  DC). 

Kaula,  W.M.  (1966).  Theory  of  Satellite  Geodesy  (Blaisdell,  Waltham,  MA). 

Kaula  W.M.  (1975).  "Absolute  Plate  Motions  by  Boundary  Velocity  Minimizations"  J. 
Geophys.  Res.  80,  244-248, 

Klepczynski,  W.J.  (1982).  "Coordinator's  Report:  Connected-Elements  Radio  Interferom- 
etry" in  Project  MERIT:  Report  on  the  Short  Campaign  G.A.  Wilkins  and  M.  Feissel, 
eds.  (Royal  Greenwich  Observatory,  Herstmonceux,  UK),  34,  77. 

Kouba,  J.  (1983).  "A  Review  of  Geodetic  and  Geodynamic  Satellite  Doppler  Positioning" 
Rev.  Geophys.  Space  Phys.  21,  27-40. 

Kovalevsky,  J.  and  Mueller,  I.  (1981).  "Comments  on  Conventional  Terrestrial  and  Quasi- 
Inertial  Reference  Systems"  in  Reference  Coordinate  Systems  for  Earth  Dynamics  E. 
Gaposchkin  and  B.  Kolaczek,  eds,  (Reidel,  Dordrecht,  Holland),  pp.  375-384. 

Kovalevsky,  J.,  Mueller,  I.,  and  Kolaczek,  B.,  eds.  (1989).  Reference  Frames  in  Astronomy 
and  Geophysics  (Kluwer,  Dordrecht,  Holland). 

Kumar,  M.  (1972).  "Coordinate  Transformation  by  Minimizing  Correlations  between  Pa- 
rameters" Dept.  of  Geodetic  Science  Report  184  (Ohio  State  University,  Columbus, 
OH). 

Lambeck,  K.  (1971).  "Determination  of  the  Earth's  Pole  of  Rotation  from  Laser  Range 
Observations  to  Satellites"  Bulletin  Geodesique  101,  263-280. 

Lambeck,  K.  (1980).  The  Earth's  Variable  Rotation  (Cambridge  University  Press,  Cam- 
bridge, England). 

Larden,  D.R.  (1982).  "Monitoring  the  Earth's  Rotation  by  Lunar  Laser  Ranging"  Reports 
from  the  School  of  Surveying  UNISURV  S-20  (Univ.  of  New  South  Wales,  Kensington, 
Australia). 

Ma,  C.  (1978).  Very  Long  Baseline  Interferometry  Applied  to  Polar  Motion,  Relativity  and 
Geodesy  TM  79582  (NASA  GSFC,  Greenbelt,  MD). 

Markowitz,  W.,  Hall,  R.G.,  Essen,  L.,  and  Parry,  J.V.L.  (1958).  "Frequency  of  Cesium  in 
Terms  of  Ephemeris  Time"  Physical  Review  Letters,  I,  no.  3. 

Markowitz,  W.  (1960).  "The  Photographic  Zenith  Tube  and  the  Dual  Rate  Moon  Camera" 
Stars  and  Stellar  Systems  G.P.  Kuiper  and  B.M.  Middlehurst,  eds.,  I  (University  of 
Chicago  Press,  Chicago,  IL). 

Marsh,  J.G.,  Lerch,  F.J.,  Putney,  B.H.,  Christodoulidis,  D.C.,  Smith,  D.E.,  Felstentreger, 
T.L.,  Sanchez,  B.V.,  Klosko,  S.M.,  Pavlis,  E.C.,  Martin,  T.V.,  Robbing,  J.W.,  William- 
son, R.G.,  Colombo,  O.L.,  Rowlands,  D.D.,  Eddy,  W.F.,  Chandler,  N.L.,  Rachlin, 
K.E.,  Patel,  G.B.,  Bhati,  S.,  and  Chinn,  D.S.  (1988).  "A  New  Gravitational  Model 
for  the  Earth  from  Satellite  Tracking  Data:  GEM-T1"  J.  Geophys.  Res.  93,  6169-6215. 

Martin,  T.V.,  Oh,  I.H.,  Eddy,  W.F.,  and  Kogut,  J. A.  (1976).  Volume  I  GEODYN  System 
Description  (EG&G/WASC,  Riverdale,  MD). 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH 


275 


Matsakis  D.N.,  Jostles.  F.J.,  Angerhofer,  P.E.,  Florkowski,  D.R.,  McCarthy,  D.D,  Ji- 
ayan'  X.,  and  Yunlou,  P,  (1986).  "The  Green  Bank  Interferometer  as  a  Tool  for  the 
Measurement  of  Earth  Orientation  Parameters"  The  Astronomical  Journal,  91,  no.  6, 
1463-1473. 

McCarthy  D  D  ,  Angerhofer,  P.E,  and  Florkowski,  D.R.  (1985).  "Connected-Element 

Interferometer  Results  in  Project  MERIT"  in  Mueller,  1985,  1,  341-350. 
McCarthy,  D.D.  and  Babcock,  A.K.  (1986),  "The  Length  of  Day  since  1656"  Physics  of 

the  Earth  and  Planetary  Interiors  44,  281-292. 
McCarthy,  D.D.,  ed.  (1989).  "IERS  Standards  (1989)"  IERS  Technical  Note  3  (Central 

Bureau  of  the  IERS,  Observatoire  de  Paris,  Paris,  France). 
McCarthy,  D.D.  (1990).  "High  Frequency  Variations  In  Earth  Rotation"  in  McCarthy  et 

id.,  1990. 

McCarthy,  D.D.  and  Luzum,  B.  (1990).  "Combination  of  Precise  Observations  of  the 
Orientation  of  the  Earth"  Submitted  to  Bulletin  Geodesique. 

McCarthy,  D.D.,  Paquet,  P.,  and  Carter,  W.,  eds.  (1990).  Proceedings  of  the  IUGG  Sym- 
posium "Variations  in  Earth  Rotation"  (American  Geophysical  Union,  Washington, 
DC). 

McLintock,  D.N.  (1980).  "Very  Long  Baseline  Interferometry  and  Geodetic  Applications 
PhD  dissertation  (Univ.  of  Nottingham,  Dept.  of  Civil  Engineering,  UK). 

Minster,  J.B.  and  Jordan,  T.H.  (1978).  "Present-Day  Plate  Motions"  J.  Geophys.  Res.  83, 
Bll,  5331-5354. 

Mitchell,  H.C.  and  Simmons,  L.G.  (1945).  The  State  Plane  Coordinate  Systems  {A  Manual 
for  Surveyors)  Special  Publication  235  (National  Geodetic  Survey,  Rockville,  MD). 

Moffit,  F.  and  Bouchard,  H.  (1975).  Surveying,  6th  ed.  (Intext  Educational  Publishers, 
New  York,  NY). 

Molodenskii,  M.S.,  Eremeev,  V.F.,  Yurkina,  M.I.  (1962).  Methods  for  Study  of  the  External 
Gravitational  Field  and  Figure  of  the  Earth  (Israel  Program  for  Scientific  Translations, 
Jerusalem) . 

Moritz,  H.  (1980).  Advanced  Physical  Geodesy  (Abacus  Press,  Tunbridge  Wells,  Kent,  UK). 
Moritz,  H.  and  Mueller,  I.I.  (1987).  Earth  Rotation:  Theory  and  Observation  (Ungar/Con- 

tinuum,  New  York,  NY). 
Morrison,  L.V.  (1979a).  "Re- determination  of  the  Decade  Fluctuations  in  the  Rotation  of 

the  Earth  in  the  period  1861-1978"  Geophys.  J.R.  Astr.  Soc.  58,  349-360. 
Morrison,  L.V.  (1979b).  "An  Analysis  of  Lunar  Occultations  in  the  Years  1943-1974  for 

Corrections  to  the  Constants  in  Brown's  Theory,  the  Right  Ascension  System  of  the 

FK4,  and  Watts'  Lunar-profile  Datum"  Man.  Not.  R.  Astr.  Soc.  187,  41-82. 
Mueller,  I.I.,  and  Rockie,  J.D.  (1966).  Gravimetric  and  Celestial  Geodesy:  A  Glossary  of 

Terms  (Ungar,  New  York,  NY). 
Mueller,  I.I.  (1969).  Spherical  and  Practical  Astronomy  as  Applied  to  Geodesy  (Ungar, 

New  York,  NY). 

Mueller,  I.I.,  Kumar,  M,  Reilly,  J.P.,  Saxena,  N.,  and  Soler,  T.  (1973).  "Global  Satellite 
Triangulation  and  Trilateration  for  the  National  Geodetic  Satellite  Program  (Solu- 
tions WN  12,  14,  and  16)"  Department  of  Geodetic  Science  Report  No.  199  (The  Ohio 
State  University,  Columbus,  OH). 

Mueller,  I.I.,  ed.  (1985).  Proceedings  of  the  International  Conference  on  Earth  Rotation 
and  the  Terrestrial  Reference  Frame  (Dept.  of  Geod.  Sci.  and  Surveying,  The  Ohio 
State  University,  Columbus,  OH). 

Mueller,  I.I.  (1988).  "Reference  Coordinate  Systems:  An  Update"  in  Theory  of  Satellite 
Geodesy  and  Gravity  Field  Determination  R.  Rummel  and  F.  Sanso,  eds.  (Springer 
Verlag,  Heidelberg). 


276 


EXPLANATORY  SUPPLEMENT 


Mulholland,  J.D.,  ed.  (1977).  Scientific  Applications  of  Lunar  Laser  Ranging  {Reidel,  Dor- 
drecht, Holland). 

Munk,  W.H.  and  MacDonald,  G.J.F.  (1960).  The  Rotation  of  the  Earth:  A  Geophysical 
Discussion  (Cambridge  Univ.  Press,  Cambridge,  UK). 

Newton,  R.R.  (1970).  Ancient  Astronomical  Observations  and  the  Accelerations  of  the 
Earth  and  Moon  (The  Johns  Hopkins  Press,  Baltimore,  MD). 

Newcomb,  S.  (1882).  "Discussion  and  Results  of  Observations  on  Transits  of  Mercury, 
from  1677  to  1881"  Astr.  Pap.  Am.  Eph.  1,  part  6,  363-487. 

NGS  (1985).  "Geodetic  Software"  Information  flyer  85-10  (NGS,  Rockville,  MD  20852). 
Reprinted  January  1987. 

Packard,  R.E.  (1988).  "Principles  of  a  Superfluid  Helium  Interference  Gyroscope:  A  New- 
Tool  to  Study  the  Earth's  Rotation"  EOS  69,  no.  44,  1153.  Abstract  only. 

Pagiatakis,  S.D.,  Langley,  R.B.,  and  Vanicek,  P.  (1984).  "Ocean  Tide  Loading:  A  Global 
Model  for  the  Analysis  of  VLBI  Observations"  in  P roc.  of  the  3rd  International  Sym- 
posium on  the  Use  of  Artificial  Satellites  for  Geodesy  and  Geodynamics  Ermioni, 
Greece,  Sept.  1982,  G.  Veis,  ed.  (National  Techn.  Univ.,  Athens),  328-340. 

Paquet,  P.  and  Louis,  L.  (1990).  "Simulations  to  Recover  Earth  Rotation  Parameters  with 
GPS  System"  in  McCarthy  et  d,,  1990. 

Parker,  W.  and  Bartholomew,  R.  (1989).  "Issues  in  Automating  the  Military  Grid  Refer- 
ence System"  in  Physical  Science  Laboratory,  1989,  1,  303-913. 

Physical  Science  Laboratory  (1989).  Proceedings  of  the  Fifth  International  Geodetic  Sym- 
posium on  Satellite  Positioning,  2  vols.  (New  Mexico  State  University,  Las  Crnces, 
NM). 

Rabbel,  W.  and  Schuh,  H.  (1986).  "The  Influence  of  Atmospheric  Loading  on  VLBI  Ex- 
periments" J.  Geophysics  59,  164-170. 

Rapp,  R.H,  (1980).  Geometric  Geodesy  Volume  II  (Advanced  Techniques)  (Department  of 
Geodetic  Science,  The  Ohio  State  University,  Columbus,  Ohio). 

Remondi,  B.W.  (1984).  "Using  the  Global  Positioning  System  *(GPS)  Phase  Observable 
for  Relative  Geodesy:  Modeling,  Processing,  and  Results"  Ph.D.  dissertation  available 
as  CSR-84-2  (Center  for  Space  Research,  The  University  of  Texas  at  Austin,  Austin, 
Texas). 

Robertson,  D.S.  (1975).  Geodetic  and  Astrometric  Measurements  with  Very-Long-Baseline 

Interferometry  X-922-77-228  (NASA  GSFC,  Greenbelt,  MD). 
Rotge,  J.R.,  Shaw,  G.L.,  and  Emrick,  H.W.  (1985).  "Measuring  Earth  Rate  Perturbations 

with  a  Large  Passive  Ring  Laser  Gyro"  in  Mueller,  1985,  2,  719-729. 
Rykhlova,  L.V.  (1969).  "Motion  of  the  Earth's  Pole,  1846.0-1891.5,  from  Observations  at 

Pulkovo,  Greenwich,  and  Washington"  Soviet  Astronomy  12,  no.  5,  898-899. 
Sato,  T.  and  Hanada,  H.  (1985).  "A  Program  for  the  Computation  of  Ocean  Tidal  Loading 

Effects  'GOTIC'"  in  Mueller,  1985  2,  742-748. 
Scherneck,  H.G.  (1983).  Crustal  Loading  Affecting  VLBI  Sites  Department  of  Geodesy, 

Report  No.  20  (University  of  Uppsala,  Institute  of  Geophysics,  Uppsala,  Sweden). 
Schwiderski,  E.W.  (1978).  Global  Ocean  Tides,  Part  1,  A  Detailed  Hydrodynamical  Model 

Report  TR-3866  (U.S.  Nav,  Surface  Weapons  Center,  Dahlgren,  VA). 
Schwiderski,  E.W.  (1980).  "On  Charting  Global  Ocean  Tides"  Rev.  Geophys.  Space  Phys. 

18,  243-268. 

Schwiderski,  E.  (1983).  "Atlas  of  Ocean  Tidal  Charts  and  Maps,  Part  I:  The  Semidiurnal 
Principal  Lunar  Tide  Af2"  Marine  Geodesy  6,  219-256.  (See  also  Chapter  8.) 

Shawe,  M.E.  and  Adelman,  A.G.  (1985).  "Precision  Laser  Tracking  for  Global  and  Polar 
Motion"  IEEE  Trans,  on  Geosci.  and  Rem.  Sens.  GE-23,  4,  391-397. 


4  /  TERRESTRIAL  COORDINATES  AND  THE  ROTATION  OF  THE  EARTH  277 

Snyder,  J.P-  (1983).  "Map  Projections  Used  by  the  U.S.  Geological  Survey"  Geological 
Survey  Bulletin  1532  2nd  ed.  (U.S.  Government  Printing  Office,  Washington,  DC). 

Soffel,  M.,  Herold,  H.,  Ruder,  H.,  and  Schneider,  M.  (1988).  "Reference  Frames  in  Rela- 
tivists Space-Time"  in  Babcock  and  Wilkins,  1988,  99-103. 

Sovers,  O.J.  and  Fanselow,  J.L.  (1987).  "Observation  Model  and  Parameter  Partials  for  the 
JPL  VLBI  Parameter  Software  ' M ASTERFIT '- 1987"  JPL  Publication  83-39,  Rev.  3. 

Stephenson,  F.R.  and  Lieske,  J.H.  (1988).  "Changes  in  the  Earth's  Rate  of  Rotation 
Between  A.D.  1672  and  1806  as  Deduced  from  Solar  Eclipse  Timings"  Astronomy  and 
Astrophysics  200,  218-224. 

Stephenson,  F.R.  and  Morrison,  L.V.  (1984).  "Long-term  Changes  in  the  Rotation  of  the 
Earth:  700  B.C.  to  A.D.  1980"  Phil.  Trans.  R.  Soc.  Lond.,  A  313,  47-70. 

Teisseyre,  R.,  ed.  (1989).  Gravity  and  Low-Frequency  Geodynamics  (Elsevier  Science  Pub- 
lishers, Amsterdam.) 

Thomas,  P.D.  (1952).  "Conformal  Projections  in  Geodesy  and  Cartography"  U.S.  Coast 
and  Geodetic  Survey  Special  Publication  No.  251  (U.S.  Government  Printing  Office, 
Washington,  DC).  Fifth  printing,  1968. 

Torge,  W.  (1980).  Geodesy,  C.  Jekeli,  Trans.  (Walter  de  Gruyter,  New  York,  NY). 

Vondrak,  J.  (1969).  "A  Contribution  to  the  Problem  of  Smoothing  Observational  Data" 
Bull.  Astron,  Inst.  Czechoslovakia  20,  349-355. 

Wahr,  J.M.  (1981).  "The  Forced  Nutations  of  an  Elliptical,  Rotating,  Elastic,  and  Ocean- 
less  Earth"  Geophys.  J.  Roy.  Astron.  Soc.  64,  705-727. 

Wahr,  J.M.  (1985).  "Deformation  Induced  by  Polar  Motion"  J.  Geophys.  Res.  90,  9363- 
9368. 

Wahr,  J.  (1987).  "The  Earth's  C21  and  S21  gravity  coefficients  and  the  rotation  of  the 

core"  Geophys.  J.R.  Astr.  Soc.  88,  265-276. 
Wahr,  J.  (1990).  Correction  to  the  above  paper,  Geophys.  J.  Int.  In  press. 
Yoder,  OF.,  Williams,  J.G.,  and  Parke,  M.E.  (1981).  "Tidal  Variations  of  Earth  Rotation" 

J.  Geophys.  Res.  86,  881-891. 
Yumi,  S.  and  Yokoyama,  K.  (1980).  "Results  of  the  International  Latitude  Service  in  a 

Homogeneous  System"  (International  Polar  Motion  Service,  Mizusawa,  Japan). 
Zelensky,  N.,  Ray,  J.,  and  Liebrecht,  P.  (1990).  "Error  Analysis  for  Earth  Orientation 

Recovery  from  GPS  Data"  in  McCarthy  et  al.  (1990). 


CHAPTER 


Orbital  Ephemerides 
of  the  Sun,  Moon,  and  Planets 

by  E.M.  Standish,  XX  Newhall,  J.G.  Williams,  and  D.K.  Yeomans 


5.1    FUNDAMENTAL  EPHEMERIDES 

The  fundamental  ephemerides  are  the  basic  computation,  based  on  the  equations 
of  motion  and  fit  to  the  observational  data,  of  the  positions  and  velocities  of  so- 
lar system  bodies.  Fundamental  ephemerides  are  the  bases  for  computing  apparent 
ephemerides,  representational  ephemerides,  phenomena,  orbital  elements,  and  sta- 
bility characteristics.  The  fundamental  planetary  and  lunar  ephemerides  of  The 
Astronomical  Almanac  are  DE200/LE200.  constructed  at  the  Jet  Propulsion  Labo- 
ratory in  1980.  They  result  from  a  least-squares  fit  to  a  variety  of  observational  data 
followed  by  a  numerical  integration  of  the  dynamical  equations  of  motion  governing 
the  major  bodies  of  the  solar  system.  DE200/LE200  are  the  bases  for  computing 
the  apparent  ephemerides  and  phenomena  that  are  listed  in  the  almanac. 

This  chapter  describes  the  equations  of  motion  used  for  the  major  bodies  in  the 
solar  system,  the  numerical  integration  program  used  to  compute  the  motions,  the 
observatiotial  data  to  which  the  ephemerides  were  adjusted,  the  reference  frame  in 
which  the  ephemerides  were  adjusted,  the  reference  frame  in  which  the  coordinates 
are  expressed,  and  the  estimated  accuracies  of  the  resultant  positions. 

Numerical  integration  of  the  equations  of  motion  is  currently  the  most  accurate 
method  of  computing  fundamental  ephemerides.  The  accuracy  is  limited  by  the 
accuracy  of  the  observational  data,  by  the  completeness  of  the  model  of  the  solar 
system  used,  and,  if  integrating  for  a  very  long  time  period,  by  the  round-off  and 
truncation  errors  of  the  numerical  integrator. 

Although  analytical  or  numerical  theories  can  be  developed  as  fundamental 
ePhemerides,  the  number  of  terms  required  for  current  observational  accuracy  is 
Prohibitive.  Rather,  such  theories  are  currently  used  for  limited-accuracy  ephemer- 
>des  for  the  sake  of  convenience. 

279 


280 


EXPLANATORY  SUPPLEMENT 


Representative  epheoierides  to  specified  accuracies  can  be  developed  based  on 
Chebyshev  polynomials  alone  and  in  combination  with  reference  orbits.  Mean  orbit 
elements  can  be  used  to  compute  approximate  positions  and  velocities. 

Historical  information  about  former  methods  of  computing  ephemerides  is  also 
provided. 

5.11  Gravitational  Model 

The  gravitational  model  used  in  DE200  includes  all  the  known  relevant  forces  acting 
upon  and  within  the  solar  system.  A  relevant  force  is  defined  as  any  force  that 
produces  an  observable  or  measurable  effect. 

Included  in  the  equations  of  motion  were  the  following:  (1)  point-mass  in- 
teractions among  the  Moon,  planets,  and  Sun;  (2)  general  relativity  (isotropic, 
parametrized  post- Newtonian),  complete  to  order  1  /  c2;  (3)  Newtonian  perturba- 
tions of  a  few  selected  asteroids;  (4)  Moon  and  Sun  action  upon  the  figure  of  the 
Earth;  (5)  Earth  and  Sun  action  upon  the  figure  of  the  Moon;  (6)  Earth  tide  action 
upon  the  Moon;  and  (7)  physical  libration  of  the  Moon.  The  equations  for  these 
effects  are  described  in  detail  in  Section  5.21.  The  relativistic  effects  on  the  time 
arguments  are  discussed  in  Chapter  2. 

5.12  The  Ephemeris  Reference  Frame 

The  positions  and  velocities  of  the  ephemerides  are  referenced  with  respect  to  iner- 
tial  space,  since  the  equations  of  motion  are  defined  with  respect  to  inert  ial  space. 
Any  systematic  error  present  in  the  ephemeris  positions  or  motions  should  be  re- 
garded as  ephemeris  error,  not  as  a  rotation  of  the  coordinate  reference  frame. 

The  orientation  of  the  reference  frame  of  DE200/LE200  is  described  by  Standish 
(1982).  Since  the  dynamical  equinox  is  a  quantity  inherent  in  the  ephemerides,  it 
is  possible  to  derive  its  location  from  the  ephemeris  itself.  The  alignment  of  the 
ephemeris  reference  frame  with  the  J2000  equinox  of  the  ephemerides  then  becomes 
relatively  straightforward.  Thus,  the  dynamical  equinox,  inherent  in  an  ephemeris, 
is  not  equivalent  to  the  equinox  of  any  specific  stellar  or  radio-source  catalog. 

5.13  The  Astronomical  Constants  Used  in  the  Ephemerides 

Associated  with  the  ephemerides  is  the  set  of  astronomical  constants  used  in  the 
creation  of  the  ephemerides.  Many  of  these  values  do  not  agree  exactly  with  the 
standard  IAU  1976  set  of  constants.  The  difference  has  been  necessary  in  order  to 
provide  a  best  fit  of  the  ephemerides  to  the  observational  data.  These  constants  are 
associated  directly  with  the  ephemerides  and  are  considered  to  be  an  integral  part 
of  them.  They  are  presented  in  Section  5.42. 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  281 

5.2    COMPUTATION  OF  EPHEMERIDES 
5  21    Mathematical  Model 

Newhall  et  al.  (1983)  present  the  equations  of  motion  integrated  for  the  creation 
of  the  planetary  and  lunar  ephemerides,  DE200/LE2OO.  That  description  is  repro- 
duced here.  The  mathematical  model  includes  contributions  from:  (a)  point-mass 
interactions  among  the  Moon,  planets,  and  Sun;  (b)  general  relativity  (isotropic, 
parametrized  post-Newtonian);  (c)  Newtonian  perturbations  of  a  few  selected  aster- 
oids; (d)  Moon  and  Sun  action  on  the  figure  of  the  Earth;  (e)  Earth  and  Sun  action 
on  the  figure  of  the  Moon;  (f)  Earth  tide  action  on  the  Moon;  and  (g)  physical 
libration  of  the  Moon. 

5.211  Point-Mass  Interactions  The  principal  gravitational  force  on  the  nine  plan- 
ets, the  Sun,  and  the  Moon  is  modeled  by  considering  those  bodies  to  be  point 
masses  in  the  isotropic,  parametrized  post-Newtonian  (PPN)  n-body  metric  (Will, 
1974).  Also  included  are  Newtonian  gravitational  perturbations  from  the  asteroids 
Ceres,  Pallas,  Vesta,  Iris,  and  Bamberga.  These  five  asteroids  were  found  to  have 
the  most  pronounced  effect  on  the  Earth-Mars  range  over  the  time  span  covered  by 
the  Mariner  9  and  Viking  spacecraft  range  measurements.  The  n-body  equations 
were  derived  from  the  variation  of  a  time-independent  Lagrangian  action  integral 
formulated  in  a  nonrotating  solar-system  barycentric  cartesian  coordinate  frame. 
The  reference  plane  is  the  Earth's  mean  equator  of  B1950.0.  The  jc-axis  coincides 
approximately  with  the  1950  equinox  of  the  FK4  catalog. 

For  each  body  i,  the  point-mass  acceleration  is  given  by  Equation  5.211-1 

f  _  y  Mrj  ~  r-)  f  .     2(0  +  7)       W     (20  ~  1)       Hk  (Vi\2 

'point  mass  ,3,       1  1  c2      2^  r  c2      Z-j  fik  1\c) 

/va2    2(1+7)         3  Hn  -  tj)  ■  tj]2    l  ,       .  ..  \ 


jjti  'J 

3  +  47  \  -  fyfj    \    Mrm  -r.) 
2c2 


^2^111 ^3  — ,  (5.211-1) 

FV      m=i  r'"' 

where  r,-,  ih  and  f,  are  the  solar-system  barycentric  position,  velocity,  and  acceler- 
ation vectors  of  body  i;  fij  =  Gnij,  where  G  is  the  gravitational  constant  and  trij  is 
the  mass  of  body  j;  r$  =  \rj  —  r;|;  @  is  the  PPN  parameter  measuring  the  nonlinear- 
ity  in  superposition  of  gravity;  7  is  the  PPN  parameter  measuring  space  curvature 
Produced  by  unit  rest  mass  (in  this  integration,  as  in  general  relativity,  (3  =  7  =  1)' 
v'-'  =  |r,|;  and  c  is  the  velocity  of  light. 


282 


EXPLANATORY  SUPPLEMENT 


In  the  last  term  on  the  right-hand  side  of  Equation  5.211-1,  quantities  em- 
ploying the  index  m  refer  to  the  asteroids.  The  positions  of  the  asteroids  are  not 
integrated  but  are  obtained  from  polynomials  representing  heliocentric  Keplerian 
ellipses.  The  polynomials  give  good  representations  for  perturbations  on  the  planets 
at  the  present  time.  At  times  in  the  distant  past  the  polynomials  drifted  from  the 
real  asteroid  orbits,  but  the  perturbations  were  smaller  (Williams,  1984)  for  Mars 
than  any  ancient  optical-measurement  accuracy. 

The  quantity  r,-  appearing  in  two  terms  on  the  right-hand  side  of  Equation  5.211-1 
denotes  the  barycentric  acceleration  of  each  body  j  due  to  Newtonian  effects  of  the 
remaining  bodies  and  the  asteroids. 

5.212  Figure  Effects  Long-term  accuracy  of  the  integrated  lunar  orbit  requires 
the  inclusion  of  the  figures  of  the  Earth  and  Moon  in  the  mathematical  model.  In 
DE200  the  gravitational  effects  due  to  figures  include: 

(1)  The  force  of  attraction  between  the  zonal  harmonics  (through  fourth  degree) 
of  the  Earth  and  the  point-mass  Moon  and  Sun; 

(2)  The  force  of  attraction  between  the  zonal  harmonics  (through  fourth  degree) 
and  the  second-  and  third-degree  tesseral  harmonics  of  the  Moon  and  the 
point-mass  Earth  and  Sun. 

The  mutual  interaction  between  the  figures  of  the  Earth  and  Moon  is  ignored. 

The  contribution  to  the  inertial  acceleration  of  an  extended  body  arising  from 
the  interaction  of  its  own  figure  with  an  external  point  mass  is  expressed  in  the 
^rjC,  coordinate  system,  where  the  f-axis  is  directed  outward  from  the  extended 
body  to  the  point  mass;  the  7j-axis  is  directed  east  (lying  in  the  selenographic  xy- 
plane,  perpendicular  to  the  f-axis);  and  the  £-axis  is  directed  north,  completing  the 
right-hand  system  (see  Figure  5.212.1).  In  that  system  (Moyer,  1971), 


T 

(  "1 

V 

If 

J. 

♦EOT 


(n+  l)P„(sin<£)  " 

0  (5.212-1) 
-  cos  4>P',,(sin  4>)_ 
—{n+  \)F"(s\n  4>)[Cnm  cos  mX  +  Snm  sin  mX] 
m  sec  <AP"(sin  0)[-Cnm  sin  mX  +  S,m  cos  mX] 
=i  |_   cos  4>P","(sin  4>)[C„,„  cos  mX  +  Snm  sin  mX] 


where  n  is  the  gravitational  constant  G  times  the  mass  of  the  point  body;  r  is  the 
center-of-mass  separation  between  the  two  bodies;  n\,  and  n2  are  the  maximum 
degrees  of  the  zonal  and  tesseral  expansions,  respectively;  P„{sm  <j>)  is  the  Legendre 
polynomial  of  degree  «;  P"'(sin  4>)  is  the  associated  Legendre  function  of  degree  n  and 
order  m\  J„  is  the  zonal  harmonic  for  the  extended  body;  Cnm,  Snm  are  the  tesseral 
harmonics  for  the  extended  body;  a  is  the  equatorial  radius  of  the  extended  body; 
(p  is  the  latitude  of  the  point  mass  relative  to  the  body-fixed  coordinate  system  in 


which  the  harmonics  are  expressed;  and  A  is  the  east  longitude  of  the  point,  mass 
in  the  same  body-fixed  coordinate  system. 

The  primes  denote  differentiation  with  respect  to  the  argument  sin  <p.  The  ac- 
celerations are  transformed  into  the  solar-system  barycentric  cartesian  system  by 
application  of  appropriate  rotation  matrices:  first  by  a  rotation  from  the  j*^  system 
to  the  selenographic  system,  followed  by  the  application  of  the  inverse  libration- 
angle  matrix. 

The  interaction  between  the  figure  of  an  extended  body  and  a  point  mass  also 
induces  an  inertial  acceleration  of  the  point  mass.  If  f fig  denotes  the  acceleration 
given  in  Equation  5.212-1  when  expressed  in  solar-system  barycentric  coordinates, 
then  the  corresponding  acceleration  Tpm  °f  the  point  mass  is 

rPM  =  -^rFIG,  (5.212-2) 

PPM 

where  ^FtG  and  /iPM  are  the  gravitation  constant  G  times  the  masses  of  the  extended 
body  and  point  mass,  respectively. 

5.213  Earth  Tides  The  tides  raised  by  the  Moon  on  the  Earth  appear  as  a  bulge 
leading  the  Earth-Moon  line  by  a  phase  angle  6.  The  resulting  geocentric  acceler- 
ation of  the  Moon  is  given  by  the  expansion 


3k2tim  ( .     Vm\  (  a 

Ttides  ?   1  +  ~ 


'  em 


r,, 


x  +  y6 
y  —  xb 

z 


(5.213-1) 


284  EXPLANATORY  SUPPLEMENT 

where  fcj  is  the  potential  Love  number  of  the  Earth;  ae  the  radius  of  the  Earth; 
rem  is  the  geocentric  lunar  distance;  and  x,  y,  and  z  are  the  geocentric  cartesian 
coordinates  of  the  Moon  expressed  in  the  true-of-date  system.  (The  rotation  to 
mean  equator  and  equinox  of  J2000.0  is  performed  by  the  application  of  an  inverse 
nutation  matrix  followed  by  an  inverse  precession  matrix.  The  nutation  matrix  is 
evaluated  using  only  the  leading  (18.6-yr)  term.)  In  addition,  (j,m  is  the  gravitation 
constant  times  the  mass  of  the  Moon;  fie  is  the  gravitation  constant  times  the  mass 
of  the  Earth. 

The  inertial  accelerations  follow  from  the  conservation  of  the  center  of  mass. 
For  further  discussion,  see  Williams  et  al.  (1978). 

5.214  Lunar  Librations  It  is  necessary  to  form  a  matrix  transforming  between 
the  inertial  coordinate  system  of  the  integration  and  the  selenographic  system.  The 
Euler  angle  definitions  and  their  differential  equations  were  taken  from  Goldstein 
(1950).  <f>  is  the  angle  along  the  Earth's  fixed  equator  from  the  fixed  equinox  to 
the  line  of  nodes  with  the  Moon's  true  equator;  9  is  the  inclination  of  the  Moon's 
true  equator  to  the  Earth's  fixed  equator;  and  tp  is  the  angle  along  the  Moon's 
equator  from  the  line  of  nodes  to  the  reference  meridian  of  the  selenographic  system. 
Following  customary  procedures,  we  define 

a  C-A 

=  (5.214-1) 

and 

B-A 

1L  =  (5.214-2) 

where  A,  B,  and  C  are  the  three  principal  moments  of  inertia  of  the  Moon  and 
C  >  B  >  A.  The  relationship  between  0L,  -yL,  J2,  C22  and  C /  ma2  (where  m  is  the 
mass  of  the  Moon  and  a  is  the  lunar  radius)  is  described  by  Ferrari  et  al.  (1980). 

Let  FpxG  be  the  force  on  the  Moon  due  to  the  gravitational  interaction  of 
the  lunar  figure  and  an  external  point-mass  Earth  or  Sun.  Ffig  is  derived  from 
Equation  5.212-1  .  Then  the  torque  N  on  the  Moon  is  given  by 

N  =  r  x  Ffig,  (5.214-3) 

where  r  is  the  vector  from  the  lunar  center  of  mass  to  the  point  mass.  In  the 
selenographic  principal- axis  system  the  equations  for  the  angular  velocity  vector  0 
are  related  to  the  Euler  angles  through 

iox  =  tf>  sin  9  sin  ip  +  9  cos  tp 

uiy  =  <p  sin  9  cos  tp  —  9  sin  tp  (5.214-4) 
ujz-  4>  cos  9  +  4>. 


ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  285 

Table  5.214.1 

Lunar  Libration  Angles  and  Rates 


Epoch  Epoch 
JD  2440400.5  JD  2444400.5 


tp  5.13326253997944214  -003  -3.88899107819826403  -002 

|  1 . 005339296430386 1 8  -  004  - 1 , 27558 1 40671 24741 3  -  004 

9  3. 82365872861 401 043  -  001  4. 3091 2863340948250  -  001 

0  1 . 441 67407096036579  -  005  5. 09287249525085733  -  005 

ip  1.29422680846346332  +  000  1.33180551146558290  +  000 

ip  -1.19916273482678420  -  004  9.33300094985815842  -005 


The  differential  equations  for  the  angular  velocity  come  from  Euler's  equations. 

wvw,  +  — 


1  -  PlIL  A 

Cjy  =  /Jib**  +  ^  (5.214-5) 


j.N* 


g 

c 

Finally,  the  differential  equations  for  the  three  Euler  angles  are 

dix  sin  tp  +  iMy  cos  ip  +  9(tp  -  4>  cos  9) 

 5n1 

9  =  6jx  cos  ib  -  uy  sin  ip  -  <pip  sin  9  (5.214-6) 
$  =  qz  -  ij)  cos  9  +  (p9  sin  9. 

The  second-order  differential  equations  for  the  Euler  angles  of  a  rigid  body  Moon 
are  integrated  numerically,  considering  torques  induced  by  the  Earth  and  Sun. 

The  libration  states  at  the  epoch  2440400.5  are  given  in  Table  5.214.1.  From 
the  nature  of  its  definition  the  angle  $  (denoting  the  angular  displacement  of  the 
selenographic  meridian  from  the  Earth's  equator)  grows  rapidly  with  time,  changing 
by  2t  radians  per  lunar  revolution.  To  limit  the  magnitude  of  the  numbers  carried 
by  the  numerical  integrator,  a  linear  polynomial  was  removed  from  the  initial  con- 
ditions for  ip  presented  to  the  integrator.  In  all  calculations  the  actual  values  of  ib 
and  tp  used  are: 


(5.214-7) 


286  EXPLANATORY  SUPPLEMENT 

where  il'-mt(t),  i/'w(f)  denote  the  angle  and  rate  provided  by  the  integrator: 


0,  =0.22997 1502 1898 189 rad  d"1.  (5.214-8) 

Discussions  of  numerically  integrated  physical  librations  are  given  by  Williams 
et  al.  (1973),  Cappallo  (1980),  and  Cappallo  et  al.  (1981).  Nonrigid-body  effects 
are  described  by  Yoder  (1979)  and  Cappallo  (1980).  The  numerically  integrated 
physical  librations  used  to  fit  the  lunar  laser  data  came  from  the  program  described 
by  Williams  et  al.  (1973)  rather  than  from  that  described  here,  since  higher  accuracy 
is  needed  for  the  data  reduction  than  for  the  integration  of  the  lunar  orbit. 


5.215  Solar-System  Barycenter  In  the  n-body  metric,  all  dynamical  quantit  ies  are 
expressed  with  respect  to  a  center  of  mass  whose  definition  is  modified  from  the 
usual  Newtonian  formulation.  The  solar-system  barycenter  is  given  by  Estabrook 
(1971,  private  communication)  as 

=  0,  (5.215-1) 


where 


lc2  '     2c2  ^r«\ 


In  Equation  5.215-2  fij  is  defined  as  before  and  v,  is  the  barycentric  speed  of  body 

nj  =  \rj  -  n\.  (5.215-3) 

During  the  process  of  numerical  integration  only  the  equations  of  motion  for  the 
Moon  and  planets  were  actually  evaluated  and  integrated.  The  barycentric  position 
and  velocity  of  the  Sun  were  obtained  from  Equation  5.215-1.  It  should  be  noted 
that  each  of  Equations  5.215-1  and  5.215 -2  depends  on  the  other,  requiring  an 
iteration  during  the  evaluation  of  the  solar  position  and  velocity. 


5.22   Numerical  Integration 

The  numerical  integration  of  Equations  5.211-1  and  5.214-6  was  carried  out  using 
a  variable-step-size,  variable-order  Adams  method  (Krogh,  1972).  The  maximum 
allowable  order  of  any  of  the  33  equations  is  14;  the  actual  order  at  any  instant  is 
determined  by  a  specified  error  bound  and  by  the  behavior  of  backward  differences 
of  accelerations. 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN.  MOON.  AND  PLANETS  287 

5  221  Force  Model  Evaluation  The  calculation  and  arrangement  of  accelerations 
at  each  integration  step  is  as  follows: 

(1)  The  integrator  subroutine  provides  new  states  (positions  and  velocities)  for 
the  nine  planets,  the  Moon,  and  the  libration  angles. 

(2)  The  asteroid  states  are  evaluated  from  fixed  polynomials. 

(3)  Equations  for  the  relativistic  masses  are  evaluated  for  the  planets,  Moon, 
asteroids,  and  Sun,  using  current  states  for  all  bodies  except  the  Sun.  (The 
barycentric  state  of  the  Sun  calculated  at  the  end  of  the  previous  step  is 
retained  for  this  evaluation.) 

(4)  The  present  approximate  state  of  the  Sun  is  obtained  from  the  constraint 
(Equation  5.215-1). 

(5)  Equations  5.215-2  are  evaluated  again,  using  this  new  estimate  of  the  solar 
state. 

(6)  Equation  5.215-1  is  evaluated  a  second  time  to  provide  the  current  state  of 
the  Sun. 

(7)  Equations  5.211-1  are  evaluated  to  obtain  the  accelerations  of  the  nine 
planets  and  the  Moon. 

(8)  It  has  proved  numerically  more  suitable  to  integrate  the  lunar  ephemeris 
relative  to  the  Earth  rather  than  to  the  solar-system  barycenter.  The  solar- 
system  barycentric  Earth  and  Moon  states  are  replaced  by  the  quantities 
rem  and  rfi,  given  by 

rm  =  Tm~te  (5.221-1) 


and 

rB  =  ^rc  +  M'"r'",  (5.221-2) 
He  +  (*m 

where  the  subscripts  e  and  m  denote  the  Earth  and  Moon,  respectively. 
Note  that  rem  is  the  difference  of  solar-system  barycentric  vectors  and  is 
distinguished  from  a  geocentric  vector  by  the  relativistic  transformation 
from  the  barycenter  to  geocenter.  (The  vector  can  be  interpreted  as 
representing  the  coordinates  of  the  Newtonian  Earth-Moon  barycenter  rel- 
ative to  the  solar-system  barycenter.  It  has  no  physical  significance  and 
does  not  appear  in  force  calculations;  it  is  solely  a  vehicle  for  improving 
the  numerical  behavior  of  the  differential  equations.) 
(9)  The  equations  for  the  libration  angle  accelerations  are  evaluated. 

5.222  Estimated  Integration  Error  The  method  of  error  control  used  in  the  in- 
tegration puts  a  limit  on  the  absolute  value  of  the  estimated  error  in  velocity  of 
each  equation  at  the  end  of  every  integration  step.  Step  size  and  integration  orders 
were  adjusted  on  the  basis  of  estimated  error.  The  limits  selected  for  DE200  were 
2  X  10" 17  AUd-1  in  each  component  of  the  equations  of  motion  for  the  planets  and 
Moon,  ancj  2  x  10-15  rad  d_1  for  each  component  of  the  libration  equations. 


288  EXPLANATORY  SUPPLEMENT 

5.223  Adopted  Constants  The  integration  requires  inputting  the  numerical  val- 
ues of  a  number  of  parameters.  Some  of  these  parameters,  such  as  the  initial  po- 
sitions and  velocities  of  the  planets  and  Moon,  result  from  the  least-squares  fits 
and  are  different  in  each  fit.  Other  parameters,  such  as  some  of  the  masses  and  the 
Earth's  zonal  harmonics,  come  from  outside  sources  and  are  only  rarely  changed 
for  these  present  purposes.  Some  parameters,  such  as  the  mass  of  the  Earth-Moon 
system,  can  be  derived  from  the  data,  but  for  convenience  are  changed  only  when 
statistically  significant  improvements  can  be  made  over  the  standard  values. 

The  lunar  secular  acceleration  is  an  important  parameter  that  has  been  subject 
to  uncertainty  and  confusion.  Lunar  laser  data  now  provide  an  estimate  of  the  lunar 
secular  acceleration  (Calame  and  Mulholland,  1978;  Williams  et  ai,  1978;  Dickey 
et  at,  1982;  and  Dickey  and  Williams,  1982).  Input  can  be  a  Love  number  and  a 
phase  shift  that  are  converted  to  an  acceleration  (Chapront-Touze  and  Chapront, 
1988).  The  value  used  in  DE118  (DE200)  was  h  =  -23?9  ±  1"3  /  cy2.  This  may  be 
compared  with  the  more  recently  estimated  value  of  -24"9  ±  I'.'O  /  cy2  (Newhall  et 
ai,  1989). 

5.23   Orientation  of  Ephemerides 

5.231    Procedure  Summary     The  J2000-based  ephemerides,  DE200/LE200,  were  cre- 
ated directly  from  the  Bl950-based  ephemerides,  DE118/LE62,  by  a  simple  reori- 
entation of  the  reference  frame.  The  orientation  is  presented  by  Standish  (1982a); 
the  essential  features  are  reproduced  here.  This  procedure  was  done  in  the  following 
five  steps: 

(1)  The  1950  dynamical  equinox  of  DEI  18  was  determined  to  be 

£n8(1950)  =  -ar(1950)  =  +0"5316,  (5.231-1) 

where  the  superscript  signifies  that  the  "rotating"  definition  of  the  equinox 
(Standish,  1981)  was  used. 

(2)  DE118  was  rotated  onto  its  own  dynamical  equinox  of  1950,  producing 
DE119: 

rm  =  Rj(-0?5316)r]l8.  (5.231-2) 

(3)  DEI  19  was  precessed  to  the  epoch  J2000,  using  the  3  X  3  matrix  P  given 
by  Lieske  (1979): 

r'1]9=Pr119.  (5.231-3) 

(4)  The  dynamical  equinox  of  DE119'  at  J2000  was  determined  to  be  E^,Q  — 
-0JQ0073. 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  289 

(5)  DEI  19'  was  adjusted  onto  its  own  dynamical  equinox  of  J2000,  thereby 
producing  DE200: 

rm  =  Rz(0:!OO073)r,n9.  (5.23 1-4) 

5,232  Astronomical  Constants  The  preceding  analyses  and  comparisons  reveal  a 
number  of  features  that  merit  further  discussion. 

The  origin  of  the  reference  system  of  DEI  18  should  be  approximately  that  of 
the  FK4,  since  the  ephemeris  has  been  fit  to  data  that  included  transit  observa- 
tions of  the  U.S.  Naval  Observatory  that  have  been  referenced  to  the  FK4.  As  such, 
the  determination  of  £1^(1950)  may  be  interpreted  as  a  determination  of  the  FK4 
equinox.  The  value  of  0'.'5316  found  in  Step  1  of  Section  5.231  agrees  remarkably 
closely  with  that  of  Fricke  (1982)  for  the  FK4:  (EFJC4(1950)  =  0'.'525).  The  smallness 
of  the  difference  of  0'.'0066  must  be  fortuitous,  however,  for  the  expected  uncertain- 
ties of  the  two  determinations  are  nearly  an  order  of  magnitude  greater. 

One  may  calculate  the  mean  obliquity,  e,  at  a  given  epoch  directly  from  the 
ephemerides,  using  an  analysis  similar  to  the  one  used  for  computing  Q.  This  deter- 
mination should  be  quite  accurate  (±  0'.'01 )  since  the  data  set  used  in  the  adjustment 
of  the  ephemerides  included  10  years  of  Lunar  Laser-Ranging.  As  such,  the  obliquity, 
especially  at  the  mean  epoch  of  the  laser-ranging  data  (1975),  is  well  represented 
by  the  ephemerides.  The  analysis  gives  the  result 

400(/2000)  =  23°26'21"4119,  (5.232-1) 

where  the  rotating  (Standish,  1981)  sense  of  the  definition  has  been  used. 
This  latter  number  is  then  to  be  compared  with  IAU  (1976)  value  of 

e,AU  "  23°26'21,.,448,  (5.232-2) 

giving 

£u,-^oo  =  0"0361.  (5.232-3) 

Bretagnon  and  Chapront  (1982)  have  made  an  independent  analysis  of  DE200/LE200, 
using  their  analytical  planetary  and  lunar  theories  (Bretagnon,  1980, 1981;  Chapront- 
Touze,  1980;  Chapront-Touze  and  Chapront,  1980).  The  analysis,  covering  100 
years,  produces  a  value  for  the  dynamical  equinox  (rotating  sense)  of  0','00068.  This 
independent  check  verifies  that  DE200/  LE200  is  indeed  referred  to  its  own  dynam- 
ical equinox  of  J2000.0  to  within  an  accuracy  of  ±  OL'001 . 


290  EXPLANATORY  SUPPLEMENT 

5.3    OBSERVATIONAL  DATA  FIT  BY  THE  PLANETARY  AND  LUNAR 
EPHEMERIDES 

The  planetary  and  lunar  ephemerides  represent  the  results  of  numerical  integra- 
tions of  the  equations  of  motion  that  describe  the  gravitational  physics  of  the  solar 
system.  It  is  assumed  that  the  equations  of  motion  accurately  describe  the  physics, 
at  least  to  the  presently  observable  accuracy.  Also,  the  computer  program  that  in- 
tegrates these  equations  has  been  demonstrated  to  be  sufficiently  accurate.  It  is 
the  least-squares  adjustment  process,  of  course,  that  produces  the  initial  conditions 
and  the  set  of  astronomical  constants  that  are  used  by  the  numerical  integration 
computer  program. 

The  most  critical  feature  of  the  construction  of  modern-day  lunar  and  plan- 
etary ephemerides  is  the  accuracy  and  variety  of  the  observational  data  to  which 
the  ephemerides  are  fit.  This  section  (taken  from  Standish,  1990)  describes  the 
observational  data  used  in  the  creation  of  DE200/LE200. 

The  observational  data  include  meridian  transits,  satellite  astrometry,  radar 
ranging  to  a  planet's  surface,  ranging  to  various  spacecraft,  and  laser  ranging  to 
the  lunar  reflectors.  The  reduction  formulas  are  given  for  each  data  type.  The 
accuracies  of  each  type  are  given  along  with  the  numbers  of  observations  and  the 
time  spans  covered  by  the  different  sets  of  data. 

5,31    Optical  Data 

There  have  been  three  types  of  optical  data  used  in  the  Jet  Propulsion  Laboratory 
(JPL)  ephemerides  up  to  and  including  DE118.  These  are  the  transit  observations 
from  the  U.S.  Naval  Observatory  (USNO),  some  astrometric  plate  data  of  Saturn 
taken  at  the  University  of  Virginia's  Leander  McCormick  Observatory,  and  a  set  of 
normal  points  of  Neptune  and  Pluto  provided  by  the  USNO. 

5.311  Transit  Circle  Data  The  only  transit  data  used  in  the  JPL  ephemerides  up 
to  and  including  DE118  were  the  observations  from  the  U.S.  Naval  Observatory 
(USNO)  taken  with  the  six-inch  and  nine-inch  meridian  circles.  Furthermore,  only 
those  since  1911  have  been  used,  the  date  signifying  the  introduction  of  the  imper- 
sonal micrometer.  (See  Table  5.311.1.) 

The  observations  are  recorded  in  the  publications  of  the  USNO,  second  series. 
The  data  listed  in  these  publications  have  been  reduced  to  the  Washington  catalog  of 
the  concurrent  epoch.  Table  5.311.1  presents  references  for  the  Washington  catalogs 
in  which  the  observations  are  given. 

All  the  transit  observations  for  catalogs  W(25)  through  W4(50)  were  trans- 
formed to  the  reference  system  of  the  FK4  using  the  formulas  of  Schwan  (1977). 
For  catalog  W(10)  the  table  published  in  the  second  series  of  the  U.S.  Naval  Ob- 
servatory publications  was  used. 


ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  291 


Table  5.311.1 

Transit  Circle  Observations  from  the  U.S.  Naval  Observatory 
that  have  been  used  in  the  JPL  Ephemerides,  DE118 


Time-span 

Telescope 

Vol/Part 

Number  of 
Observations 

191 1-1Q1A 

6" 

XI 

2436 

1913-1925 

9" 

XIII 

3381 

W(25) 

1925-1935 

6" 

XV  l/l 

6911 

W(40) 

1935-1944 

9' 

xv/v 

4547 

W(50) 

1935-1941 

6" 

XVI/I 

3777 

W2(50) 

1941-1 949 

6" 

XVI/III 

3444 

W3(50) 

1949-1956 

6" 

XIX/I 

3678 

W4<50) 

1956-1962 

6" 

XIX/II 

4051 

W5(50) 

1963-1971 

6" 

XXIII  1  f  1 

5811 

(Cir.) 

1975-1977 

6" 

1543 

Totals 

39579 

Note:  The  Vol/Part  refers  to  the  Second  Series  of  the  USNO  Publications 


Data  since  the  end  of  the  W5(50)  in  1971  have  been  provided  in  machine- 
readable  format  by  the  USNO.  These  must  be  considered  as  provisional,  since  the 
transit  circle  was  refurbished  during  the  interval  1972-1974. 


5.3111  Basic  reduction  of  the  transit  observations  Transit  observations  are  differ- 
ential in  nature — the  planetary  observations  undergo  the  same  processing  as  those 
of  the  observed  stars,  both  being  related  to  the  standard  catalog  of  the  epoch.  The 
observations  are  published  as  geocentric  apparent  right  ascensions  and  declinations, 
taken  at  the  time  of  meridian  passage.  For  comparison,  then,  one  obtains  a  com- 
puted position  from  the  ephemerides  by  iterating  to  find  the  time  at  which  the  local 
apparent  hour  angle  of  the  planet  is  zero.  The  formulation  for  computing  apparent 
places  has  been  essentially  identical  to  that  described  in  Chapter  3. 


5.3112  Phase  corrections  A  phase-effect  correction  is  determined  by  the  USNO 
and  applied  to  the  observations  before  publication.  This  correction  is  based  on  the 
theoretical  effect  that  should  be  expected  due  to  the  geometric  situation.  Here, 
empirical  formulas  have  been  used  to  fit  and  remove  further  phase  effects  from  the 
transit-circle  observations.  It  seems  that  changes  result  mainly  from  "irradiation 
effects"  whereby  an  observer  tends  to  measure  a  bright  illuminated  limb  differently 
from  a  darker  terminator. 


292  EXPLANATORY  SUPPLEMENT 

For  the  center  of  light  measurements,  for  both  Mercury  and  Venus,  the  USNO 
correction  was  removed  from  the  observations,  and,  instead,  the  following  formula 
was  applied: 

[Cq  +  CJ+CjF  +  CiI3],  (5,3112-1) 


Aa 

s 

sin  9 

AS 

r 

cos  0 

where  /  is  the  phase  angle  expressed  in  units  of  90  degrees  (/  =  r/90);  ©  is  the  position 
angle  of  the  midpoint  of  the  illuminated  edge;  and  i  is  the  phase  angle  between  the 
Sun  and  the  Earth,  subtended  at  the  observed  body.  The  coefficients,  Cq  through 
C3,  are  solved  for  in  the  ephemeris  solutions.  The  resulting  cubic  polynomial  agrees 
quite  well  with  that  found  by  Lindegren  (1977). 

For  an  illuminated  limb  measurement,  for  both  Mercury  and  Venus,  the  USNO 
correction  was  retained,  and  the  following  formula  was  applied  in  addition: 


Aa 

sin© 

AS 

cos© 

[ifl  +  Li/  +  L2/2+L3/3]. 


(5.3112-2) 


Here,  the  coefficients  are  in  units  of  seconds  of  arc.  For  measurements  of  four  limbs, 
the  USNO  correction  was  retained  and  the  following  formula  was  applied  in  addi- 
tion: 


sin  0 

AS 

cos  0 

Bk  sin  2z, 


(5.3112-3) 


where  k  -  4,  5,...,  8  for  Mars,  Earth,...,  Neptune.  This  empirical  formula  may  be 
compared  with  that  of  Chollet  (1984),  the  form  of  which  has  been  derived  from 
physical  considerations. 

The  forms  of  these  preceding  "phase  correction"  formulas  were  all  chosen 
strictly  from  empirical  considerations. 


5.31 13  Day  corrections  For  each  Washington  catalog,  corrections  are  applied  to 
the  observations  obtained  during  daylight  hours;  namely,  observations  of  the  Sun, 
Mercury,  and  Venus.  Typically,  these  are  given  in  tables  as  functions  of  the  object's 
declination  and  of  the  time  of  day.  Day  corrections  have  not  been  applied,  however, 
to  the  preliminary  observations  given  in  the  USNO  circulars.  Therefore,  for  the 
1975-1977  data  the  following  day  corrections  were  solved  for  and  removed  from  the 
observations  of  the  Sun,  Mercury,  and  Venus: 

Aa  =Ai  +  A2sin6  (5.3113-1) 
AS  =  £>i  +  D2  sin  6,  (5.3113-2) 

where  S  is  the  declination  of  the  body.  A\,  A2,  D\,  and  Dj  are  empirical  quantities. 


6  /  ORBITAL  EPHEMER1DES  OF  THE  SUN,  MOON,  AND  PLANETS  293 

5  3114  Catalog  drift  The  mean  motions  of  the  inner  planets  are  determined  pri- 
marily by  the  strength  of  the  ranging  data  in  the  least-squares  fit.  Therefore,  any 
inconsistency  between  these  mean  motions  and  those  determined  from  the  optical 
data  will  appear  as  secular  trends  in  plots  of  the  optical  residuals.  These  drifts  are 
due  partly  to  an  incorrect  value  of  precession  and  to  an  equinox  motion  in  the  FK4 
reference  system,  which  have  been  accounted  for  in  two  ways. 

5.312  Corrections  to  precession  and  equinox  drift  The  secular-like  drifts  in  the 
optical  residuals  have  been  modeled  by  the  standard  formulas, 

Aa  =  {Ak  +  An  sin  a  tan  6)750 

AS  =  ( An  cos  a)T50,  (5.312-1) 

where  T50  is  the  time  in  centuries  past  1950.  These  corrections  were  subtracted  from 
the  observed  values  of  all  the  transit  observations  of  the  planets  and  the  Sun. 

If  one  assumes  that  these  parameters  come  from  precession  error  and  equinox 
drift  exclusively,  then  the  following  relations  apply: 

Ak  =  —E  +  Ap cos  e  -  Al       and       An  =  Ap  sin  e,  (5.3 12-2) 

where  E  is  the  equinox  motion;  Ap  is  the  correction  to  lunisolar  precession;  Al  is 
the  correction  to  planetary  precession;  and  e  is  the  value  of  the  Earth's  obliquity. 

For  DE118,  the  value  of  Art  was  set  to  +0"438/cy,  corresponding  to  Ap  s 
+l"10/cy,  Fricke's  (1971)  determination  of  the  correction  to  precession.  Ak  was  fixed 
to  -O'.'266/cy,  corresponding  to  Fricke's  (1982)  determination  of  the  FK4  equinox 
motion,  E  -  +l'.'275/cy.  The  value  of  AJfc  should  have  been  -O'.'237/cy,  since  the 
correction  for  planetary  precession  of  Al  =  — O'.'029/cy  (see  Lieske  et  at,  1977)  was 
inadvertently  omitted. 

With  Ak  and  An  constrained  to  the  values  determined  by  Fricke,  the  corrections 
to  the  computed  residuals  of  the  transit  data  are  identical  to  those  that  would 
have  been  found  if  the  whole  procedure  (observations  and  reductions)  had  been 
performed  in  the  J2000.0  (IAU  1976)  reference  system. 

s-3121  Catalog  offsets  With  At  fixed  for  the  solution  to  DE118,  there  was  the 
possibility  of  a  residual  secular  trend  in  the  optical  residuals.  It  was  decided  to 
introduce  constant  offsets  in  both  right  ascension  and  in  declination  for  each  of  the 
Washington  catalogs.  The  values  for  these  are  included  in  Table  5.42.1. 

s-313  Astrometric  Plate  Data  for  Saturn  Over  the  years  1973-1979,  the  Univer- 
sity of  Virginia,  under  contract  from  JPL,  provided  measurements  of  photographic 
Plates  taken  of  the  planet  Saturn  and  its  satellites  (Ianna,  1974,  1980).  The  mea- 
surements of  the  satellites  and  the  background  stars  were  provided  to  JPL  and 


294  EXPLANATORY  SUPPLEMENT 

were  reduced  by  Standish,  using  the  satellite  ephemerides  of  Null  (1978)  and  the 
Zodiacal  Catalog  of  the  USNO  (Schmidt  et  at,  1980).  The  "observed"  positions 
of  the  satellites  from  the  reductions  were  then  compared  to  "computed"  positions 
derived  from  the  satellite  and  planetary  ephemerides.  Since  the  errors  of  the  satel- 
lite ephemerides  were  expected  to  be  small  in  comparison  to  those  of  the  planetary 
ephemerides,  and  since  the  satellites  errors  enter  in  a  quasi  random  way  when  many 
observations  are  used,  it  was  assumed  that  the  differences  (O  —  C$)  could  be  at- 
tributed to  the  errors  in  the  planetary  ephemerides.  Accordingly,  the  differences 
were  used  to  adjust  only  the  ephemeris  of  Saturn. 

5.314  Normal  Points  for  Neptune  and  Pluto  As  mentioned  before,  the  main  op- 
tical data  used  by  JPL  are  the  transit  observations  from  the  USNO,  beginning  in 
1911.  Clearly,  for  the  outermost  planets  this  is  not  enough  data  to  determine  a  full 
orbit.  Consequently  the  USNO  transmitted  a  set  of  normal  points  that  gave  the 
differences  between  one  of  their  experimental  ephemerides  and  an  intermediary  JPL 
ephemeris  (DEI  14).  The  optically  based  USNO  ephemeris  gave  what  was  believed 
to  be  reasonable  fits  to  the  observations  of  Neptune  and  Pluto.  These  data  were 
then  used  to  adjust  the  solution  for  DE118.  The  data  were  transmitted  in  the  form 
of  corrections  to  longitude  and  latitude,  one  pair  of  points  every  400  days.  The  time 
span  for  Neptune  was  1846-1974;  for  Pluto,  1914-1974. 


5.32   Radar-Ranging  Data 

5.321    Computation  of  Radar-Ranging  Measurements     Radar-ranging  measurements 
are  actual  timings  of  the  round-trip  light-time  of  the  electromagnetic  signal  from 
the  time  that  it  leaves  the  transmitter  until  the  time  that  it  arrives  at  the  receiver 
(Figure  5.321.1).  The  timing  is  done  by  an  atomic  clock  at  the  observing  station. 

For  an  observation  received  at  the  time  t  (expressed  in  TDB  time  units),  the 
round-trip  light-time  is  given  by  the  difference  UTC(/)  -  UTC(/  -  Td  -  r„),  where 

t„  =  |rR(r  -  rd)  -  rA(r  -  rd  -  tu)\  I  c  +  Arjrel]  +  Ar„[cor]  +  AT„[tropo]  (5.321-1) 
and 

rd  =  |rA(0  -  rR(t  -  rd)\ I  c  +  Ar^frel]  +  Ar^cor]  +  Ar</[tropo],  (5.321-2) 

tu  and  rd  are  the  light-times  (in  TDB  units)  of  the  upleg  and  the  downleg,  respec- 
tively; rA  is  the  solar-system  barycentric  position  of  the  antenna  on  the  Earth's  sur- 
face; rR  is  solar-system  barycentric  position  of  the  reflection  point  on  the  planet's 
surface;  c  is  the  velocity  of  light;  and  the  three  Ar's  are  the  corrections  to  the  light- 
times  due  to  relativity,  the  electron  content  of  the  solar  corona,  and  the  Earth's 


Figure  5.321.1 

Diagram  of  geometry  for  planetary  radar  ranging 


troposphere,  respectively.  The  two  formulas  are  solved  iteratively,  first  for  rd  then 
for  tu. 

The  location  of  the  antenna  is  computed  in  a  straightforward  manner  using  a 
planetary  ephemeris  and  the  proper  formulas  of  precession,  nutation,  tuning,  and 
polar  motion  with  which  one  orients  the  Earth  into  the  reference  frame  of  the 
ephemerides.  The  location  of  the  point  of  reflection  was  computed  by  assuming  the 
surfaces  of  Mercury  and  Venus  to  be  spherical.  Radar  ranging  to  Mars  was  not 
included  in  the  solution  for  DEI  18. 

5.3211  Time  delays  for  relativity,  the  solar  corona,  and  the  troposphere  The  time- 
delay  due  to  relativity,  given  by  Shapiro  (1964),  is  obtained  by  integrating  along 
the  signal  path  over  the  value  of  the  potential.  For  each  leg  of  the  signal  path,  the 
delay  is  given  by  the  formulas 


Ar[rel]  = 


(1  +  -))GM 


In 


e+p  +  q 
e+p-q 


(5.3211-1) 


296 


EXPLANATORY  SUPPLEMENT 


where  7  is  the  PPN  parameter  of  general  relativity  and  where  e,  p,  and  q  are  the 
heliocentric  distance  of  the  Earth,  the  heliocentric  distance  of  the  planet,  and  the 
geocentric  distance  of  the  planet,  respectively.  These  distances  are  evaluated  at 
t  —  Td  for  the  planet,  at  t  -  —  r„  for  the  Earth  during  the  upleg,  and  at  (  for  the 
Earth  during  the  downleg. 

The  delay  from  the  solar  corona  (see  Muhleman  and  Anderson,  1981)  is  ob- 
tained by  integrating  along  the  signal  path  from  point  Pi  to  point  P2  over  the 
density  of  ionized  electrons,  Ne  (cm-3), 


At  [cor]  = 


(5.3211-2) 


where  c  is  the  speed  of  light  (cm/sec),  /  is  the  frequency  (Hz),  and  s  is  the  linear 
distance  (cm).  The  density  is  given  by 

r6  r2 

where  r  is  the  heliocentric  distance  expressed  in  units  of  the  solar  radius  and  /?  is  the 
solar  latitude.  The  values  for  the  constants,  A,  a,  and  b  are  included  in  Table  5.42.1. 

The  delay  from  the  Earth's  troposphere  is  discussed  by  Chao  (1970).  For  each 
leg,  it  is 

Ar[tropo]  =  7  nsec  /  (cos  z  +  0. 0014  /  (0. 045  +  coU)),  (3.3211-4) 
where  z  is  the  zenith  distance  at  the  antenna. 


S.322  Radar-Ranging  Data  The  strength  of  a  radar  echo  from  a  planet's  surface 
varies  as  the  inverse  fourth  power  of  the  distance.  Up  to  the  present  time,  high- 
quality  planetary  radar-ranging  observations  have  been  confined  to  times  when  the 
distances  are  less  than  about  1 AU.  At  these  distances,  the  precision  of  the  ranging 
observations  has  been  seen  to  be  about  100  meters.  However,  for  ephemeris  mea- 
surements, variations  in  the  topography  of  the  planet's  surface  introduce  variations 
into  the  observations  which  tend  to  dominate  the  uncertainties.  For  Mercury  and 
Venus  these  amount  to  about  1  km. 

The  radar-ranging  measurements  used  in  the  JPL  ephemerides  have  come 
from  five  antennas.  These  are  located  in  Arecibo,  Puerto  Rico;  Tyngsboro,  MA 
(Haystack);  Westford,  MA  (Millstone);  and  Goldstone,  CA  (DSS  13  and  DSS  14). 
In  addition,  some  of  the  measurements  at  Goldstone  were  taken  in  the  bistatic 
mode:  transmitting  with  DSS  14  and  receiving  with  DSS  13.  Table  5.322.1  presents 
a  list  of  the  measurements  which  have  been  used  directly  in  DEI  18. 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  297 

Table  5.322.1 

Radar-Ranging  Observations  Used  Directly  in  DE118 


Planet      Timespan     Antenna  Number 

of  Observations 


Mercury 

1966-1971 

Arecibo 

106 

1966-1971 

Haystack 

217 

1971 

Gold  13/14 

9 

1972-1974 

Gold  14 

30 

Mercury  Totals 

362 

Venus 

1966-1970 

Arecibo 

246 

1966-1971 

Haystack 

219 

1964-1967 

Millstone 

101 

1964-1970 

Gold  13 

294 

1970-1971 

Gold  13/14 

14 

1971-1973 

Gold  14 

44 

1973-1977 

Gold  14 

25 

Venus  Totals 

945 

5.33   Spacecraft  Range  Points 

There  were  three  sets  of  spacecraft-ranging  data  used  in  the  ephemeris  solutions 
for  DE118.  They  are  (1)  normal  points  from  the  Pioneer  Missions  to  Jupiter,  (2) 
normal  points  to  the  Mariner  9  orbiter  of  Mars,  and  (3)  actual  range  measurements 
to  the  Viking  Landers  on  the  surface  of  Mars. 

Normal  points  represent  modified  distance  measurements.  The  original  round- 
trip  range  and  Doppler  measurements  have  been  reduced  using  the  JPL  Orbit 
Determination  Program  (Moyer,  1971).  This  reduction  is  an  adjustment  for  various 
parameters,  including  the  spacecraft  orbit,  the  planet's  mass  and  gravity  field,  and 
so  forth.  As  such,  the  resultant  range  residuals  represent  derived  corrections  to  the 
nominal  planetary  ephemeris  used  in  the  reduction.  These  residuals  are  then  added 
to  the  geometric  (instantaneous  Earth-planet)  range  in  order  to  give  a  pseudo 
"observed"  range  point. 


5-33l  Pioneer  Normal  Range  Points  to  Jupiter  There  was  one  normal  range  point 
from  each  of  the  two  Pioneer  encounters  of  Jupiter.  The  major  uncertainty  for  each 
Point  comes  from  the  uncertainties  in  the  determination  of  the  spacecraft's  orbit 


298 


EXPLANATORY  SUPPLEMENT 


Table  5.332.1 

Mariner  9  Orbiter  Normal  Range  Points  to  Mars 


Dates 

a 

Number  of 

(usee) 

Observations 

2441272-2441361 

0.25 

77 

2441389-2441540 

0.29 

81 

2441541-2441555 

0.76 

487 

2441577-2441602 

Total 

645 

Note:  The  four  sets  of  points  are  grouped  according  to  the 
proximity  in  time  to  the  solar  conjunction  of  Mars  (JD  2441568). 


with  respect  to  the  center  of  mass  of  the  planet.  The  observations,  transmitted  by 
Null  (1976),  are  as  follows: 

Pioneer  10:  1973  Dec  04  0"  ET  (2442020.50)  /  2754747323+.40  /xsec. 
Pioneer  11:     1974  Dec  03  0h  ET     (2442384.50)  /  2439811990+10  ^sec. 

These  values  represent  one-way  geometric  (instantaneous)  distances  from  the  center 
of  mass  of  the  Earth  to  the  barycenter  of  the  Jovian  planetary  system. 

5.332  Mariner  9  Normal  Range  Points  to  Mars  During  its  lifetime,  the  onboard 
range  transponder  of  the  Mariner  9  Orbiter  allowed  accurate  range  measurements 
to  the  planet  Mars.  These  data  exist  in  three  sets  according  to  their  proximity  to 
the  Martian  solar  conjunction  (JD  2441568)  when  the  2300-MHz  ranging  signal 
passed  within  4  solar  radii  of  the  Sun  at  the  heliographic  latitude  of  +79°.  When 
near  conjunction  the  major  uncertainties  of  these  points  are  due  to  uncertainties  in 
the  densities  of  the  ionized  electrons  in  the  solar  corona  through  which  the  signal 
passed;  away  from  conjunction,  the  orbital  uncertainties  dominate.  As  shown  in 
Table  5.332.1,  the  three  sets  of  data  are  weighed  accordingly.  The  data  have  been 
corrected  for  the  solar  corona  using  the  formula  given  in  Section  5.32. 

5.333  Viking  Lander  Range  Data  The  most  accurate  of  all  planetary  position  data 
are  the  two-way  ranging  measurements  taken  of  the  Viking  Landers  on  the  surface  of 
Mars.  Though  only  a  single  frequency  (2300  MHz}  was  used,  the  solar  corona  could 
be  calibrated  by  using  the  nearly  simultaneous  dual-frequency  measurements  of  the 
Viking  Orbiters.  Observations  were  made  on  the  average  of  once  per  week,  typically 
with  about  six  range  points  per  day.  The  residuals  are  seen  to  have  a  scatter  of  only 
2  to  3  meters  about  the  mean  of  the  day;  the  means  for  each  day,  however,  show 
a  scatter  of  about  6  meters  among  themselves.  Without  orbital  uncertainties  being 
present,  the  dominating  contributions  to  these  residuals  come  from  three  sources: 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  299 

the  calibration  of  the  solar  corona,  the  calibration  of  the  inherent  time-delays  in 
the  tracking  station  antennas  (done  before  and  after  each  pass),  and  the  calibration 
of  the  transponders  of  the  landers  themselves  (done  before  launch). 

The  range  data  were  reduced  using  the  formulas  given  in  Section  5.321  with 
the  reflection  point  on  the  planet's  surface  being  represented  by  the  location  of 
the  lander  on  Mars.  For  this,  one  needs  the  Martian  coordinates  of  the  landers  as 
well  as  a  set  of  angles  used  to  express  the  orientation  of  Mars  within  the  ephemeris 
reference  frame.  The  position  of  the  lander,  expressed  in  the  frame  of  the  ephemeris, 
is  given  by 

r  =  R.t(-s)R;(-I?)R,(-/)RJ(-J?;)R,(-/;)R;(-V')r0,  (5.333-1) 

where  e  is  the  obliquity  of  the  ecliptic;  Q  and  /  are  the  longitude  and  latitude  of  the 
mean  Martian  orbit  upon  the  ecliptic;  J?9  and  Iq  are  the  mean  node  and  inclination 
of  the  Martian  equator  upon  the  mean  orbit;  V  is  the  longitude  of  the  Martian 
prime  meridian  measured  along  the  equator  from  the  intersection  of  the  orbit;  and 
ro,  the  Mars-fixed  coordinates  of  the  lander,  and  where 

Q'q  =  flq-M\  =    + Ac    and    V'  =  V  +  Aip  cos  l'q,  (5.333-2) 

where  Ait'  and  A=  express  the  nutation  of  Mars,  computed  from  the  formulation 
of  Lyttleton  et  al.  (1979).  The  Mars-fixed  coordinates  of  the  lander  are  computed 
from  the  cylindrical  coordinates, 

Tq  _  [w  cos  A,  u  sin  A,  v]T.  (5.333-3) 

A  summary  for  the  Viking  Lander  ranging  data  is  as  follows: 

Lander  #1  2442980-2444054  Points:  683 
Lander  #2    2443026-2443417    Points:  78. 

The  values  for  the  parameters  used  in  the  reductions  are  included  Table  5.42.1. 
The  values  for  e,  J?,  and  /  were  adopted:  those  for  Qq,  Iq,  and  V,  as  well  as  the 
coordinates  of  the  landers,  were  estimated  in  the  least-squares  adjustments. 


5'34   Lunar  Laser  Range  Data 

The  Lunar  Laser  Range  (LLR)  data  consist  of  time-of-flight  measurements  from 
McDonald  Observatory  to  any  one  of  four  retroreflectors  on  the  Moon  and  back 
again.  The  retroreflectors  are  at  the  Apollo  11,  14,  and  15  landing  sites  and  on 


300  EXPLANATORY  SUPPLEMENT 

the  Lunakhod  2  vehicle.  These  2954  range  points  are  distributed  from  August  1969 
to  June  1980.  The  normal  points  through  1973  have  been  published  by  Abbot  et 
al.  (1973),  Mulholland  et  al.  (1975),  and  Shelus  et  al.  (1975).  The  LLR  data  are 
deposited  in  the  National  Space  Science  Data  Center.  During  the  least-squares  fit 
the  ranges  have  been  weighted  according  to  the  instrumental  errors  that  accompany 
each  point.  The  general  trend  is  toward  improving  accuracy  with  time.  The  simple 
post-fit  rms  residual  is  31  cm  in  one-way  range.  The  weighted  rms  residual  is  27cm 
(Dickey  et  al,  1982). 

For  the  Moon,  the  mean  orbital  elements  that  affect  its  geocentric  distance 
will  be  strongly  determined  by  the  laser-ranging  data.  The  eccentricity  is  implicitly 
determined  to  a  few  parts  in  109  and  the  mean  anomaly  to  a  few  milliarcseconds. 
There  is  a  strong  determination  of  differential  geocentric  lunar  and  solar  ecliptic 
longitudes  resulting  from  strong  solar  perturbations  on  the  lunar  distance  {ampli- 
tudes of  about  3000  km  and  4000  km  for  the  two  leading  terms).  During  the  span  of 
the  observations  the  differential  longitudes  are  known  to  a  few  milliarcseconds.  Out- 
side the  data  span  the  error  in  the  lunar  longitude  is  dominated  by  the  uncertainty 
in  the  lunar  tidal  acceleration.  (See  Williams  and  Standish,  1989.) 


5.4    LEAST-SQUARES  ADJUSTMENT  OF  THE  EPHEMERIDES 


The  least-squares  adjustment  for  DE118/LE62  involved  175  explicit  unknown  pa- 
rameters and  50424  observational  equations.  The  adjustment  was  done  in  two  steps. 
Using  a  previous  ephemeris  (DE111/LE55)  as  the  nominal  ephemeris,  a  preliminary 
solution  was  made  involving  all  solution  parameters  that  were  judged  to  be  relevant. 
Then,  the  values  for  certain  parameters  were  rounded  off  and  forced  into  the  final 
solution  for  DE118/LE62  which  readjusted,  slightly,  the  remaining  parameters. 

There  are  a  number  of  reasons  for  forcing  certain  parameters  to  have  specific 
values:  the  adoption  of  someone  else's,  presumably  more  accurate,  determination  of 
the  constant  (e.g.,  the  mass  of  Pluto);  the  rounding  of  values  for  cosmetic  reasons 
(e.g.,  a  truncated  value  for  the  inverse  mass  of  Jupiter);  or  the  need  for  consistency 
with  outside  sources  (e.g.,  the  1AU  values  of  Ait  and  An). 

The  creation  of  DE118/LE62  was  done  partially  with  the  intent  that  this 
ephemeris  (when  rotated  onto  the  J2000  equator  and  equinox)  would  be  used  for  the 
foundation  of  future  national  almanacs.  Ideally,  the  ephemeris  should  have  incorpo- 
rated all  of  the  astronomical  constants  of  the  IAU  (1976)  J2000  reference  system. 
However,  it  was  recognized  that  more  modern  values  for  some  constants  were  nec- 
essary in  order  to  fit  the  more  accurate  observational  data  properly.  In  particular 
it  was  not  possible  to  use  the  IAU  set  of  constants  and  still  produce  acceptable 
solutions  for  the  Viking  Lander  ranging  data  or  the  Lunar  laser-ranging  data. 


ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  301 


Table  5.41.1 

The  Observational  Data  Used  for  the  Adjustment  of  DE1 18/LE62 


1  y pu  ui  vuwii  »fl uui i 

I  rtt  Aran  1 

II  ILGI  VOI 

NumKpr  nf 

Oh  qp  Pint  i  ct 

Standard  D^vintinn 

Wasninyion  udnoiifa 

1 Q1 1— 1 Q77 
i y i  i —  i  y  /  / 

ouo  /  y 

1  "fl  f'Run   Mar  \/a.n\ 

n  ^  I'M  a  re  Mnni 

U.D  ^iviars,  ...j  iNSpj 

c nil  irn  netrnnnfltni 

oHturn  asiromeuy 

1 Q7Q—1 Q7Q 

i  y  /  o —  i  j  /  j 

**■/  yu 

U*  o 

Neptune,  Pluto  normal  points 

1825-1974 

386 

0".5 

Radar-ranging 

1964-1977 

1307 

1 0  km  (before  1 967) 

1 .5  km  (after  1 967) 

Pioneer  ranges  at  Jupiter 

1973-1974 

2 

3km, 12km 

Mariner  9  ranges  at  Mars 

1971-1972 

645 

40-1 00  m 

Viking  Lander  ranges 

1976-1980 

761 

7m 

Lunar  laser  ranges 

1969-1980 

2954 

18cm 

Total 

50424 

5.41   The  Observational  Equations 

Table  5.41.1  gives  the  number  of  observational  equations  for  each  different  set  of 
data.  Each  equation  was  normalized  by  multiplying  it  by  the  factor,  1  /  (Tq,  where 
ctq  is  the  a  priori  standard  deviation  of  a  single  observation  of  a  particular  set  of 
data.  Previous  experience  in  working  with  the  various  sets  has  led  to  a  knowledge 
of  the  individual  accuracies  of  each  type  of  observation.  The  values  of  the  a  priori 
standard  deviations,  listed  in  Table  5.41.1,  were  chosen  to  be  approximately  equal 
to  the  rms  post- fit  residuals. 


5.42  The  Solution  Parameters 

Table  5.42.1  gives  the  values  and  the  formal  standard  deviations  of  the  solution 
parameters  of  the  least-squares  adjustment  for  DE118/LE118.  The  parameters  for 
which  values  were  adopted  from  outside  sources  are  enclosed  in  square  brackets. 
Parameters  that  were  determined  from  the  preliminary  solution,  rounded,  and  then 
forced  into  the  final  solution  are  enclosed  in  parentheses.  The  adjustment  of  the  or- 
bital parameters  is  inherent  in  the  values  of  the  initial  conditions  of  the  ephemerides 
that  are  listed  in  Table  5.42.2. 

In  addition  to  the  parameters  listed  in  the  table,  there  were  a  number  of  pa- 
rameters pertaining  to  the  plate  solutions  and  catalog  adjustment  of  the  Saturn 
astrometrical  data.  These  entered  into  the  solutions  implicitly;  they  were  present  in 
the  solution  just  as  if  they  had  been  carried  along  explicitly;  however,  their  presence 
is  not  seen  directly. 


Table  5,42.1 

Values  and  Formal  Standard  Deviations  of  the  Constants 
Used  in  DE118/LE118  (DE200/LE200) 


Cralo  P^iyfnr  Hrm/AI  tl 
OCdlB  PdClUr  [Hm/AUJ 

\  1  tiJOl?/ O /  U.DC 

±  0.002) 

Earth/Moon  Mass  Ratio 

[81.300587] 

Sun/Plane1  Mass  Ratios 

Sun/Mercury 

=  [6023600] 

Sun/Venus 

=      [408523. 5] 

Sun/EM-harv 

=      [328900. 55] 

Sun/Mars 

=  [3098710] 

Sun/Jupiter 

=      (1047. 35010.0001 

Sun/Saturn 

=      (3498.0  ±0.014) 

Sun/Uranus 

=      (22960  ±  6) 

Sun/Neptune 

=  [19314] 

Sun/Pluto 

=  [130000000] 

Asteroid  GM  value 

GM(Ceres) 

=      [0.1746x  10" 

1a] 

[Air/day^] 

GM(Pallas) 

=  [0.3200x10" 

13i 

GM(Vesta) 

=      [0.4080x  10" 

13, 

GM(lris) 

=  [0.160Qx10~ 

14, 

GM(Bamberga)      =      [0.2600x  10 

14i 

Radii 

Mercury  = 

2439.  990  ±  0.  093 

Venus  = 

6051.813  ±  0.  058 

Mars  = 

[3397.515] 

Day  Corrections 

*1  = 

0:'268  ±  0'.,048 

A2  = 

01378  ±01160 

Pi  = 

01153  +  01048 

Ps     =  - 

11131  ±  0"  1 60 

Phase  Corrections 

c0    =  - 

■0.03  +  0.017 

Ci  = 

0.39  ±  0.  087 

c2  = 

0.47  ±6.11 

c3     =  - 

-0.26  ±  0.039 

kl       =  " 

0'.'15  +  0'.'067 

Li  = 

2181  ±  0:'30 

L2       =  - 

2145  ±  0:'37 

1-3  = 

0:73  ±  on  3 

B4  = 

o:'40  ±  01022 

B5  = 

Oi'97  +  0l'077 

B6  = 

o:74  ±  o:'14 

B7  = 

0'.'20  ±  0'.'30 

B8  = 

0'.'93  ±  0'.'49 

Catalog  Drift 

Ak     =  I 

-07266 /cy] 

An      =  [0:'438/cyJ 

Catalog  Offsets 


W10 

0'.'365 

01303 

W20 

-ovoog 

-01033 

W2S 

oiosi 

01084 

W40 

-01027 

-01015 

W150 

-01028 

01090 

W250 

-01102 

01094 

W350 

-o:ois 

-0'.'021 

W450 

-01106 

-0'.'001 

W550 

-01087 

-0'.'032 

WCIR 

-01231 

-0'.'020 

ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS 


303 


Table  5.42.1,  continued 

Values  and  Formal  Standard  Deviations  of  the  Constants  Used  in 
DE1 1 8/  LE11 8  (DE200/LE200) 


Solar  Corona  [  cm  3] 

A 

1.22+  03  x  10s 

a 

0.44±.02x106 

b 

0.44±.03x106 

Mars  Orientation 

V 

[deg] 

[328.  70742325] 

V 

[deg/day]      350. 891 99047  +  0. 00000024 

!q 

[deg] 

25. 1808415  ±  0.0013 

'!« 

[deg/cy] 

0. 030  ±  0. 006 

nq 

35.  3371555  +  0. 0026 

fin 
4 

[deg/cy] 

-0.118  +  0.  010 

1 

[deg] 

[1.85] 

) 

[deg/cy] 

[-0. 00820] 

fl 

[deg] 

(49. 17193] 

fl 

[deg/cy] 

[-0.  29470] 

E 

[deg] 

[23. 445789] 

e 

[deg/cy] 

[-0.01301] 

Viking  Lander 

"1 

[km] 

3136.515  10.001 

«*1 

[km] 

1284.587  ±0.024 

*1 

(deg] 

311.8027  ±  0.  0033 

uz 

[km] 

2277.374  ±0.  002 

[km] 

2500.1 84  ±0.022 

A2 

[deg] 

1 34.0343  +  0.  0034 

Note:  Numbers  in  square  brackets  were  not  solved  for  but  adopted  from  other 
sources.  Numbers  in  parentheses  are  rounded  values  determined  from  a 
preliminary  solution  and  then  forced  unchanged  into  the  present  final  solution. 


5.43   The  Standard  Deviations 

The  standard  deviations  listed  in  Table  5.42.1  are  the  formal  values,  straight  from 
the  least-squares  solutions.  They  do  not  represent  realistic  uncertainties,  for  it  is 
well  known  that  formal  uncertainties  tend  to  be  overly  optimistic,  sometimes  by  an 
order  of  magnitude.  This  is  a  direct  result  of  incorrect  or  incomplete  modeling,  either 
through  the  equations  of  motion  or  through  the  data  reductions.  In  the  present  case, 
some  of  the  sources  of  the  incompleteness  are  known.  For  discussions  of  what  are 
believed  to  be  realistic  uncertainties  associated  with  the  planetary  ephemerides,  see 
Newhall  et  al.  (1983),  Standish  (1985),  and  Williams  and  Standish  (1989). 


5-5    NUMERICAL  REPRESENTATION  OF  THE  EPHEMERIDES 

The  ephemerides  produced  by  the  Jet  Propulsion  Laboratory  are  obtained  by  nu- 
merical integration  of  the  equations  of  motion  of  the  Moon  and  planets.  The  imme- 
diate output  from  the  integrating  program  is  not  suited  to  subsequent  rapid  eval- 
uation of  ephemeris  quantities.  To  provide  ephemerides  convenient  for  distribution 


Table  5.42,2 

The  Initial  Conditions  of  the  Ephemerides  at  JED  2440400.5  in  au  and  Au/day 


Coordinates 

Velocities 

J.  0/<iDUil  £o4b9b3715— 001 

k\ 

3. 36784520455775328 

-003 

Yi 

-9. 15490552856159762-002 

fa 

2  4889342837585R4ft0 

— on? 

*1 

-8.59810041345356578-002 

Z\ 

1.29440715971588809 

-002 

\  f& ni  ic- 

venus 

x2 

b.  Ua*;494j77bo441072— 001 

*2 

1 . 095241 993547441 85 

-002 

y2 

-3. 49132444047697970-001 

¥2. 

1  5612506911  "547704? 

002 

- 1 . 955443255802 1 7404  -00 1 

22 

6. 32887643692262960 

-003 

cann— Moon 

XB 

^     i  Cm  ACt  H  ~7f\A  A  C  A  A~7EQ 

1 .  1  bUI  491 7044544758—001 

*B 

1 . 681 1 6200395885947 

-002 

barycenter 

Yb 

-9. 26605558053098135-001 

Vo 

1  74ini?fi1fi1fiQ4eiQQ 

Zb 

-4. 018062651 17824489-001 

7.55975079765192612 

-004 

Msrs 

x$ 

—  i.  14boaab54b*;040833— 001 

1 . 44820048365775564 

-002 

Va. 

-1 . 32836653338579221 +000 

jA 

2  372fl'i174,5fifl7?nic;i 

—  uut 

-6. 06155187469280320-001 

24 

-2. 83748756861 61 1 822 

-004 

Jupiter 

*5 

—5.  38420864140637830+000 

*5 

1 . 09236745067075960 - 

-003 

y5 

-8. 31 249997353602621-001 

JO 

—6  52329390316976699 

-003 

*> 

-2. 25098029260032085-001 

-2.82301211072311896- 

-003 

Saturn 

f,  Oo9oo94<:o73227478+000 

-3.21 7205 1 41 22007756  - 

-003 

ye 

4, 59570992672261 122+000 

Vb 

4  33063208949070? 1fi- 

-003 

2& 

1 . 55842916634453457+000 

26 

1,92641681926973271- 

-003 

1  1     ri  1 1 1> 

*7 

— 1 .  8<io969 1 1 379855 1 69+00 1 

*7 

2. 21 544461 295879596  - 

-004 

>7 

— 1. 16273304991353263+000 

if-* 

31 

—3  76765491  Bfi3fi47T51 

^7 

-2.  50376504345852463-001 

'2l 

- 1 . 65324389089726956 - 

-003 

Mrint'i  infl 
1  N  i  -  |Jlunc 

*B 

—  1 . b059504334 1 7291 60+00 1 

2.  64312595263412502- 

-003 

ys 

-2. 39429413060150989+001 

Vc 

/8 

—  1  5034fi6fiR4'iR4fi?n71  - 

-003 

3> 

-9. 4004277295751 4666+000 

-6. 81268556592018307- 

-004 

Pli  ttn 

Xg 

—3. 04879969725404637+001 

Xg 

3. 22541 768798400992- 

-004 

-8, 7321 6536230233241  -001 

/9 

—3  14875QQ6£i,i41Q?fl7A- 

•003 

*9 

8. 91 135208725031935+000 

*9 

-1.08018551253387161- 

003 

Ql  in 

4. 50479585567460 182-003 

*S 

-3. 52445744568339381  - 

007 

ys 

7. 73254474689074171  -004 

ys 

5. 17763778067222128- 

006 

■5s 

2. 68503998557327098-004 

*s 

2.22911325240040085- 

006 

Moon 

-8. 08177235835125058-004 

6.01084831482911873- 

004 

yM 

-1,  99463003744199594-003 

yM 

-1 . 6744546915006061 9- 

004 

A* 

- 1 . 087262721 62086794-003 

-8. 5562081 0990486240- 

005 

Note:  Coordinates  given  are  heliocentric  coordinates  for  plenets,  geocentric  coordinates  for  the  Moon,  and 
solar-system  barycentric  coordinates  for  the  Sun. 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON.  AND  PLANETS  3Q5 

and  use  throughout  the  astronomical  community,  an  efficient  procedure  was  de- 
veloped for  the  generation  of  coefficients  representing  an  interpolating  polynomial. 
This  section  (taken  from  Newhall,  1989)  describes  the  generation  and  accuracy  of 
those  coefficients. 

The  numerical  integration  process  carries  the  states  of  the  Sun,  Moon,  and 
planets  as  their  solar-system  barycentric  Cartesian  coordinates  in  the  inertial  J2000 
reference  frame.  The  integration  method  used  is  a  variable-step-size,  variable-order 
Adams  procedure. 

5.51  Cbebyshev  Polynomials 

Chebyshev  polynomials  are  the  functions  of  choice  for  ephemeris  interpolation.  They 
are  stable  during  evaluation,  they  give  a  near-minimax  representation,  and  they 
provide  a  readily  apparent  estimate  of  the  effect  of  neglected  terms  on  interpolation 
error  (For  a  thorough  treatment  of  these  polynomials  see  Rivlin,  1974). 

The  nth  Chebyshev  polynomial  T„(t)  is  denned  by  the  recursion  formula 

Tn(t)  =  2tTn^(t)  -  r„_2(/),       »*2,3,  ...  (5.51-1) 

with  To(t)  =  1  and  T\  (r)  =  /.  The  applicable  range  of  t  for  interpolation  is  —  1  <  /  <  1 . 

Any  function  f(t)  has  an  approximate  Mh-degree  expansion  in  Chebyshev  poly- 
nomials 

N 

fU)  =  J2a"T^'  (5.51-2) 

and,  when  differentiated, 

N 

/(/)  =  £>„?;(/),  (5.51-3) 

where  the  a„  are  chosen  in  a  manner  appropriate  for  /(/)  and  /(/).  In  the  present 
case,  where  f(tj)  and  f(tj)  denote  a  coordinate  and  its  derivative  computed  at  dis- 
crete times  tj  by  the  integrating  program,  the  a„  serve  to  define  the  function  /(/) 
as  a  polynomial.  The  task  becomes  the  determination  of  a  set  of  a„  that  pro- 
vide interpolated  values  suitably  approximating  those  available  from  the  original 
backward-difference  representations  carried  by  the  integrator.  The  following  section 
details  the  generation  of  the  a„  for  ephemeris  body  coordinates. 

5.52  Chebyshev  Coefficient  Generation 


An  algorithm  was  developed  that  creates  Chebyshev  polynomial  coefficients  repre- 
senting the  Cartesian  coordinates  of  the  ephemeris  bodies.  The  full  span  of,  say, 


306  EXPLANATORY  SUPPLEMENT 

60  years  of  an  epheineris  file  is  segmented  into  contiguous  intervals,  or  granules,  of 
fixed  length.  (The  actual  length  of  a  granule  depends  on  the  body;  see  Table  5.53.1 
for  details.)  For  each  coordinate  of  an  ephemeris  body  the  algorithm  produces  the 
Chebyshev  coefficients  an  that  define  the  interpolating  polynomial  valid  over  a  given 
granule.  There  are  as  many  sets  of  coefficients  generated  for  each  coordinate  as  there 
are  granules  covering  the  ephemeris  span. 

fn  the  procedure,  nine  pairs  of  position  and  velocity  values  are  obtained  for 
each  granule  at  equally  spaced  times — one  pair  at  each  end  point  and  seven  in  the 
interior.  The  output  is  the  set  of  a„  for  the  polynomial  that  is  an  exact  fit  to  the 
end  points  of  the  set  of  positions  and  a  least-squares  fit  to  the  interior  positions. 
The  differentiated  polynomial  is  an  exact  fit  to  the  end  points  of  the  velocity  set 
and  a  least-squares  fit  to  the  interior  velocities.  (The  derivation  of  this  procedure 
is  given  in  Newhall,  1989.) 

This  approach  has  the  advantage  that  interpolated  position  and  velocity  are 
continuous  at  the  common  end  point  of  adjacent  granules;  it  also  minimizes  the 
effect  of  noise  that  would  otherwise  degrade  the  interpolated  velocity  obtained  from 
differentiation  of  a  polynomial  based  on  position  values  alone. 


5.53    Interpolation  Error  and  Polynomial  Degree 

It  is  essential  to  have  a  quantitative  estimate  of  the  maximum  error  expected  from 
the  interpolation  process  when  the  polynomials  described  previously  are  used  to 
extract  coordinate  values  at  arbitrary  times.  (It  should  be  noted  that  the  term 
"error"  here  refers  to  the  difference  between  interpolated  and  integrator-supplied 
values;  it  does  not  indicate  the  degree  of  accuracy  to  which  the  original  integrated 
ephemeris  represents  the  dynamical  state  of  the  solar  system.) 

The  Chebyshev  polynomials  provide  a  convenient  and  reliable  estimate  of  in- 
terpolation error.  An  arbitrary  function  has  the  exact  representation  as  an  infinite 
Chebyshev  expansion 

f{t)  =  YjanTn(t).  (5.53-1) 

The  maximum  value  of  T„(t)  is  unity  on  the  interval  [-1, 1],  the  domain  of  validity 
for  interpolation.  Therefore,  when  a  function  is  approximated  by  an  A/th-degree 
polynomial,  as  in  Equation  5.51-2,  the  maximum  error  s  arising  from  the  omitted 
remainder  of  the  series  has  the  upper  bound 

<  ^2  M\TM  $  £  W-  (5.53-2) 


ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  307 


Table  5.53.1 

Granule  Length  and  Polynomial  Degree  for  the  1 1  Ephemeris  Bodies 


Granule 

Polynomial 

Body 

length  (days) 

degree  (A/) 

t\A&rr  \  i  rv 
ivici  uui  y 

8 

13 

Vsnus 

1 6 

g 

CdllM — IVIUUII  U d  1  y L. t?l  lit?  1 

16 

12 

Mars 

I  u 

Jupiter 

32 

7 

Saturn 

32 

6 

Uranus 

32 

5 

Neptune 

32 

5 

Pluto 

32 

5 

Moon 

4 

12 

Sun 

16 

10 

Investigation  has  shown  that  the  granule  length  and  the  polynomial  degree  N  can 
be  chosen  so  that  \a„+i  I  a„\  =  0. 1  or  less  for  n  >  N.  This  implies  that  the  maxi- 
mum expected  interpolation  error  is  about  one  tenth  the  magnitude  of  the  highest 
retained  coefficient  a„. 

The  accuracy  criterion  for  standard  JPL  ephemerides  is  that  the  interpola- 
tion error  for  all  coordinate  values  must  be  less  than  0.5  millimeters.  (The  DE102 
ephemeris  covers  4400  years;  in  the  interests  of  providing  a  significantly  compressed 
file,  the  interpolation-error  criterion  was  relaxed.)  The  minimum  degree  N  of  the 
interpolating  polynomial  is  3,  as  the  requirement,  that  the  end-point  position  and 
velocity  values  be  matched  exactly  yields  four  constraints;  the  18  combined  position 
and  velocity  values  permit  a  maximum  degree  of  17.  Table  5.53.1  lists  the  granule 
length  and  polynomial  degree  for  each  body  on  the  .IPL  ephemeris  files. 


5.6    COMPUTATION  OF  OBSERVATIONAL  EPHEMERIDES 

Computing  the  fundamental  ephemerides  as  described  in  Sections  5.2  to  5.4  pro- 
duces ephemerides  in  a  space-fixed  coordinate  system  at  a  given  epoch  in  terms  of 
the  barycenter  of  the  solar  system  and  in  barycentric  time.  From  these  ephemer- 
ides, observational  ephemerides  can  be  computed  that  are  called  apparent  geocen- 
tric ephemerides,  with  respect  to  a  fixed  epoch  and  a  reference  star  catalog.  Transit 
times  of  the  objects  and  astronomical  phenomena  can  be  computed  as  well. 


308 

5.61    Apparent  Positions 


EXPLANATORY  SUPPLEMENT 


The  apparent  position  of  a  planet  or  the  Moon  represents  the  position  as  it  would 
be  seen  from  the  center  of  mass  of  the  Earth  at  some  date  in  the  coordinate  sys- 
tem defined  by  the  Earth's  true  equator  and  equinox  of  date,  if  the  Earth  and  its 
atmosphere  were  massless,  transparent,  and  nonrefr acting.  The  apparent  position 
could  then  be  related  to  observables  for  a  particular  instrument  at  some  location  on 
the  surface  of  the  Earth  that  is  rotating  and  contains  a  refracting  atmosphere.  In 
addition  to  the  transformation  of  the  coordinate  systems,  the  time  argument  must 
be  changed  from  bary centric  time  to  Terrestrial  Time.  The  formula  and  methods 
for  performing  the  transformation  from  barycenter  to  geocenter  are  provided  in 
Section  3.32.  Reduction  to  topocentric  coordinates,  with  the  effects  of  refraction 
included,  is  given  in  Section  3.7.  The  relationships  between  barycentric  time  and 
Terrestrial  Time  are  given  in  Section  2.22. 

5.62  Astrometric  Positions 

Astrometric  positions  are  useful  for  faint  objects  such  as  Pluto,  minor  planets,  and 
comets  where  observations  are  made  directly  with  respect  to  the  star  positions  on 
some  fixed  epoch  in  the  same  field.  Thus,  if  a  photographic  plate  or  a  CCD  image  is 
taken  with  respect  to  star  positions  that  are  known  on  a  catalog  for  a  fixed  epoch, 
it  is  desirable  to  relate  the  solar-system  object  to  those  positions.  An  astrometric 
position  is  therefore  easier  to  compute  than  an  apparent  place  since  the  differential 
position  is  not  concerned  with  the  orientation  of  the  coordinate  system.  The  details 
concerning  computation  of  astrometric  positions  are  given  in  Section  3.62. 

5.63  Transit  Ephemerides 

For  observational  planning  and  for  certain  types  of  observations,  it  is  desirable 
to  know  when  the  body  will  be  on  the  meridian.  Because  Terrestrial  Dynamical 
Time  (TDT)  is  independent  of  the  rotation  of  the  Earth  and  because  the  rotation 
of  the  Earth  is  not  precisely  predictable,  it  is  not  possible  to  calculate  or  publish 
in  advance  the  times  of  transits  over  a  fixed  geographical  meridian.  Therefore,  an 
auxiliary  reference  has  been  introduced.  The  position  of  the  ephemeris  meridian  in 
space  is  conceived  as  being  where  the  Greenwich  meridian  would  be,  if  the  Earth 
rotated  uniformly  with  the  rate  implicit  in  the  definition  of  Terrestrial  Dynamical 
Time.  Thus,  the  ephemeris  meridian  is  1.002738  AT  east  of  the  actual  meridian  of 
Greenwich,  where  AT  is  the  difference  TDT  -  UT.  When  referred  to  the  ephemeris 
meridian,  phenomena  depending  on  the  rotation  of  the  Earth  may  be  calculated  in 
terms  of  TDT  by  the  same  methods  as  those  by  which  calculations  referred  to  the 
Greenwich  meridian  are  made  in  terms  of  Universal  Time. 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  309 

Ephemeris  transit,  is  the  time  when  the  right  ascension  of  the  object  is  equal  to 
the  value  determined  by  substituting  the  TDT  time  into  the  equation  for  sidereal 
time.  The  times  of  transit  are  expressed  in  TDT  and  refer  to  the  transits  over  the 
ephemeris  meridian.  Because  the  longitude  of  the  ephemeris  meridian  (expressed  in 
time  measure)  is  1.002738  AT*  east  of  the  Greenwich  meridian,  the  TDT  of  transit 
over  the  Greenwich  meridian  is  later  than  that  of  ephemeris  transit  by 

AT/ (1  -  0.99727  X  rate  of  change  of  R.A.)  (5.63-1) 

or  approximately, 

ATX  1  +  rate  of  change  of  R.  A . )  (5.63-2) 

if  the  right  ascension  is  expressed  in  the  same  unit  as  the  time  interval.  The  UT 
of  Greenwich  transit  is  therefore  later  than  the  tabulated  TDT  of  the  ephemeris 
transit  by  the  small  quantity: 

AT  x  rate  of  change  of  R.A.,  (5.63-3) 

which  may,  at  present,  reach  about  2s  for  the  Moon,  but  is  less  than  0!3  for  the 
planets. 

For  the  Sun  the  TDT  of  ephemeris  transit  is  simply  12n  minus  the  equation 
of  time  interpolated  to  the  time  of  transit;  the  UT  of  Greenwich  transit  differs  by 
0. 002738A7. 

For  the  Moon,  the  TDT  of  upper  or  lower  transit  of  the  Moon  over  a  local 
meridian  may  be  obtained  by  interpolation  of  the  tabulated  time  of  upper  or  lower 
transit  over  the  ephemeris  meridian,  where  the  first  differences  are  about  25  hours. 
The  interpolation  factor  p  is  given  by 

p  =  A  +  1. 002738 AT,  (5.63-4) 

where  A  is  the  east  longitude  and  the  right-hand  side  is  expressed  in  days.  (Divide 
longitude  in  degrees  by  360  and  AT  in  seconds  by  86400).  In  general,  second-order 
differences  are  sufficient  to  give  times  to  a  few  seconds,  but  higher  order  differences 
must  be  taken  into  account  if  a  precision  of  better  than  1  second  is  required.  The 
UT  of  transit  is  obtained  by  subtracting  AT  from  the  TDT  of  transit,  which  is 
obtained  by  interpolation. 

For  planets  the  UT  of  transit  over  a  local  meridian  may  be  obtained  from: 


time  of  ephemeris  transit  -  (A  /  24)  x  first  difference. 


(5.63-5) 


31  0  EXPLANATORY  SUPPLEMENT 

This  produces  an  error  that  is  usually  less  than  1  second,  where  A  is  the  east 
longitude  in  hours  and  the  first  difference  between  transit  times  is  about  24  hours. 


5.7   ORBIT  AND  EPHEMERIDES  OF  OTHER  BODIES 
WITHIN  THE  SOLAR  SYSTEM 

5.71    Minor  Planets  and  Comets 

Orbital  information  is  available  for  several  thousand  minor  planets  (often  called 
asteroids)  and  several  hundred  cornets.  Orbital  data  for  all  numbered  minor  planets, 
and  ephemerides  for  those  objects  that  reach  opposition  during  the  volume  year,  are 
published  annually  by  the  Institute  for  Theoretical  Astronomy  in  St.  Petersburg, 
Russia.  These  annual  volumes,  entitled  Ephemerides  of  the  Minor  Planets,  can  be 
purchased  from  the  White  Nights  Trading  Company,  520  N.E.  83rd  St.,  Seattle, 
WA  98115,  USA. 

The  Minor  Planet  Center  (60  Garden  St.,  Cambridge,  MA  02138,  USA)  offers 
a  variety  of  services  for  obtaining  information  on  minor  planets  and  comets.  Cata- 
logues of  Cornetary  Orbits  are  published  every  few  years.  Approximately  ten  times 
each  year,  astrometric  observations,  ephemerides,  and  updated  orbits  are  published 
for  both  comets  and  minor  planets  in  the  Minor  Planet  Circulars.  These  circulars 
are  available  in  printed  form,  by  electronic  mail,  and  as  machine-readable  files  on 
personal  computer  disks.  Magnetic  tapes,  containing  large  files  of  astrometric  data 
for  thousands  of  minor  planets  and  comets,  can  also  be  purchased  from  The  Minor 
Planet  Center. 

The  accuracy  of  published  orbital  parameters  for  minor  planets  and  comets 
varies  from  object  to  object.  In  general,  objects  whose  orbits  are  based  upon  op- 
tical observational  data  spread  over  lengthy  time  intervals  will  have  more  orbital 
accuracy  than  those  objects  whose  orbits  are  based  upon  shorter  data  intervals. 
The  inclusion  of  radar  data  in  the  orbit  determination  process  will  dramatically 
improve  the  orbital  accuracy,  particularly  if  the  existing  optica!  data  are  spread 
over  only  a  short  interval  of  time. 

The  annual  Astronomical  Almanac  volumes  publish  ephemerides  for  the  first 
four  numbered  minor  planets.  These  volumes  also  include  orbital  elements,  mag- 
nitude parameters,  opposition  dates,  and  opposition  apparent  magnitudes  for  the 
larger  minor  planets  that  reach  opposition  during  the  volume  year.  In  addition,  the 
osculating  orbital  elements  are  given  for  the  periodic  comets  that  are  scheduled  to 
pass  perihelion  within  the  volume  year. 

The  orbital  parameters  given  for  the  minor  planets  and  comets  can  be  used  to 
generate  approximate  ephemeris  information  using  two-body  formulations.  These 
same  elements  can  be  employed  to  generate  more  accurate  ephemerides  when  used 
to  initialize  numerical  integrations  that  include  planetary  perturbations.  For  active 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN.  MOON.  AND  PLANETS  31  1 

short-period  comets,  the  generation  of  accurate  ephemerides  often  requires  that, 
jn  addition  to  the  planetary  perturbations,  the  comet's  rocketlike  outgassing  forces 
be  taken  into  account.  The  mathematical  models  used  to  describe  these  so-called 
nongravitational  effects  are  described  by  Marsden  et  al,  (1973)  and  Yeomans  and 
Chodas  (1989). 

The  magnitude  parameters  (H,  G)  given  for  the  minor  planets  can  be  used  to 
compute  the  object's  apparent  magnitude  using  the  following  relationships: 

apparent  magnitude  -H+5  log(Z>)  -  2. 5  log[(l  -  G)P,  +  GP2\  (5.71-1) 


Pi  =  exp[-3.33(tana/  2)0  63] 

P2  =  exp[-1.87(tana/2)L22],  (5.71-2) 

where 

D  =  geocentric  distance  in  AU 
r  =  heliocentric  distance  in  AU 
a  =  Sun-asteroid-Earth  angle. 

In  the  Astronomical  Almanac,  the  ephemeris  positions  and  orbital  elements 
are  given  with  respect  to  a  coordinate  system  defined  by  the  equinox  of  the  FK5 
fundamental  reference  star  catalog  and  the  J2000.0  epoch  (FK5/J2000.0  system), 
whereas  the  vast  majority  of  solutions  for  orbital  elements,  prior  to  1992,  were 
computed  with  respect  to  the  equinox  of  the  FK4  reference  star  catalog  and  the 
B1950.0  epoch  (FK4/B1950.0  system).  In  Sections  5.711-5.714,  the  expressions 
"1950.0"  and  "2000.0"  refer  to  the  FK4/B1950.0  and  FK5/J2000.0  systems  respec- 
tively. Comission  20  of  the  International  Astronomical  Union  has  recommended  the 
following  conversion  procedures  between  the  two  systems. 


5.711  Conversion  of  Comet  and  Asteroid  Astrometric  Positions  from  B1950.0  to 
J2000.0    Let    an  =  object's  right  ascension  referred  to  B1950.0  system. 

do  =  object's  declination  referred  to  B1950.0  system. 

a  =  object's  right  ascension  referred  to  J2000.0  system. 

d  =  object's  declination  referred  to  J2000.0  system. 


1.  Calculate  the  rectangular  components  of  the  object's  position  vector  Tq. 

cos(«o)  cos(<fo) 

sin(fl0)cos(rf0)  (5.711-1) 
sin(rf0) 


12 


EXPLANATORY  SUPPLEMENT 

2.  Remove  the  effects  of  elliptical  aberration  (E-terms)  to  form  astrographic 
position  vector  (r\). 

Let  Tq  be  the  vector  transpose  of  Tq.  Then  form  Fj . 


T[  =  r0  -  A  +  (ro  ■  A)r0       where  A  = 


-1.62557  x  10-61 
-0. 31919  x  10-6 
-0. 13843  x  1CT6 


(5.711-2) 


and  (r<j  •  A)  is  a  scalar  product. 
3.  Form  the  J2000.0  vector  r  from  the  vector  rj  using  the  matrix  M; 


r  =  Mr,, 


(5.711-3) 


where 


M  =  X(0)  +  7*X(0); 

T  =  Julian  centuries  from  B1950.0  epoch  to  the  observation  time  (r) 
=  (/-  2433282. 423)/  36525. 

The  equation  r  =  Mri  is  a  modification  to  Equation  30  in  Murray  (1989), 
where  the  following  matrices  are  those  defined  as  his  equations  28  and  29.' 


X(0)  = 


10bX(0)  : 


0. 9999256794956877    -0.011181 4832204662 
0. 0 1 1 1 8 1 483239 1717     0. 9999374848933 1 35 
0. 0048590037723 1 43    -  0. 000027 1 702937440 

-0. 0026455262    —  1.  1539918689    2.  1 1 1 1 346 1 90 
1.1540628161     -0.0129042997  0.0236021478 
-2.1112979048    -0.0056024448  0.0102587734 


-0.0048590038153592" 
-0.0000271625947142 
0.9999881946023742 


(5.711-4} 


The  matrix  expression  (rX(0))  removes  the  error  introduced  when  the 
B1950.0  reference  stars  were  advanced  to  the  epoch  of  observation  using 
their  proper  motions  (i.e.,  the  error  results  from  the  incorrect  constant  of 
precession  and  the  equinox  drift  between  the  FK4  and  FK5  systems).  The 
matrix  X(0)  corrects  for  the  half  arcsecond  equinox  offset  of  the  FK4  at 
the  B1950.0  epoch  and  precesses  the  vector  r{  from  the  epoch  of  B1950.0 
to  that  of  J2000.0  using  the  1976  IAU  constant  of  precession. 
Calculate  the  new  J2000.0  right  ascension  and  declination  (a,d)  from  r(*,y,z) 
using  the  following  expressions. 
Let  r  =  tJx2  +y2  +  z2 


cos(a)  cos(d)  = 
sin(a)  cos(rf)  = 


sin(af)  = 


(5.711-5) 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  313 

5  712   Conversion  of  Comet  and  Asteroid  Astrometric  Positions  from  J 2000.0  to 

B1950.0    Let   <3o    =    object's  right  ascension  referred  to  J2000.0  system. 

do    -    object's  declination  referred  to  J2000.0  system. 
a    =    object's  right  ascension  referred  to  B  1950.0  system. 
d    =    object's  declination  referred  to  B1950.0  system. 


1.  Calculate  the  rectangular  components  of  the  object's  position  vector  r0, 

(5.712-1) 


r0  = 


cos(ao)  cos(^o) 
sin(ao)cos(^o) 
sin(</0) 


2.  Calculate  the  3  x  1  vector  *\{x\,y\,z\). 

t\  -  M_1ro       where  ro  is  a  3  x  1  vector.  (5.712-2) 

The  M  matrix  is  given  in  Section  5.711. 

3.  Include  the  effects  of  elliptic  aberration  (E-terms). 

r  =  r i  +  A  -  (t\  ■  A)r, ,  (5.712-3) 

where  the  vector  A  was  defined  above  in  Section  5.711  and  (t/-A)  is  a  scalar 
product. 

4.  Calculate  the  new  right  ascension  and  declinations  (a,  d)  using  the  following 

expressions. 

Let  r  =  tJx2  +y2  +z2 

r  =  t(x,y,z) 
x 

cos(a)  cos(d)  =  - 
r 

sin(a)  cos(d)  =  - 

I  r 

sin(J)=-.  (5.712-4) 
r 

5-713    Conversion  of  Inertia!  Equatorial  Coordinates  from  B1950.0  to  J2000.0  Let 

r2,  v2  =  equatorial  rectangular  position  and  velocity  coordinates  in  J2000.0  system. 
ri>  Vj  =  equatorial  rectangular  position  and  velocity  coordinates  in  B1950.0  system. 
r2  =  X(0)r1; 

V2  =  X(0)v!,  (5.713-1) 

Where  X(0)  is  the  3x3  matrix  defined  in  Section  5.711. 

The  inverse  transformation  from  J2000.0  to  B1950.0  is  performed  using  the 
'nverse  (or  transpose)  of  the  X(0)  matrix. 


314 


EXPLANATORY  SUPPLEMENT 


5.714  J2000.0  Keplerian  Orbital  Elements  from  B1950.0  Elements  Given  the  six 
Keplerian  orbital  elements  a,  e,  T0,  W,  S2,  and  t,  in  the  B1950.0  reference  system, 
one  may  compute  the  corresponding  orbital  elements  for  the  J2000.0-based  system 
(denoted  by  primes): 


a,  a 
e,  e 

To,  n 

si,  q 

i,  t 


=  Semi-major  axes  in  B1950.0,  J2000.0  system 

as  Eccentricity  in  B1950.0,  J2000.0  system 

=  Perihelion  passage  time  in  B1950.0,  J2000.0  system 

=  Argument  of  perihelion  in  B1950.0,  J2000.0  system 

=  Longitude  of  the  ascending  node  in  B1950.0,  J2000.0  system 

=  Inclination  in  B1950.0,  J2000.0  system. 


Then  a'  =  a,  e  —  e',  Tq  -  -  Tq  and  u>',  SI1,  and  f  are  computed  from  the  following 
expressions: 


sin(u/  —  u>)  sin(/')  -  sin(7)  sin(L  +  Si) 
cos(u/  -  ui)  sin(/')  =  sifl(i)  cos(7)  +  cos(/)  sin(V)  cos(L  +  SI) 
cos{/')  =  cos(7)  cos(/)  -  waif)  sin(J)  eos(L  +  SI) 
sin(L'  +  SI')  sin(/')  =  sin(/)  sin(L  +  Q) 
cos(L'  +  J?')  sin(/')  =  cos(7)  sin(7)  +  sin(/)  cos(y)  cos(L  +  SI), 


(5.714-1) 


Figure  5.714.1 

The  relationship  between  the  B  1950.0  and  J2000.0 
reference  frames  and  the  orbitaf  plane 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS 

where  the  known  angles,  L',  L,  and  J,  are  given  by 


315 


Ll  =  4?50001688 
L  =  5?  19856209 
7  =  0f00651966. 

To  compute  the  corresponding  angles  w,  SI,  and  /  (B1950.0)  given  the  angles  w', 
J?',  and  /'  (J2000.0),  use  the  following  expressions; 

sin(n/  —  us)  sin(7)  =  sin(7)  sin(i'  +  Q') 

cos(w'  -  uj)  sin(/)  =  sin(/')  cos(7)  -  cos(/')  sin(7)  cos(L'  +  Q') 

cos(/)  =  cos(Z')  cos(7)  +  sin(/')  sin(7)  cos(L'  +  Si')  (5.714-2) 
sin(L  +  Q)  sin(/)  =  sin(/')  sin(L'  +  S2') 

cos(L  +  SI)  sin(/)  =  -  cos(/')  sin(7)  +  sin(/')  cos(7)  cos(l'  +  S2'). 

The  values  for  the  constants  U,  L,  and  J  have  been  determined  using  the  fol- 
lowing values  for  the  obliquity  of  the  ecliptic; 

23?44578787  for  (B1950.0) 
23?43929111  for  (J2000.0) 


5.8    KEPLERIAN  ELEMENTS  FOR  THE  POSITIONS  OF  THE  MAJOR 
PLANETS 


Lower  accuracy  formulas  for  planetary  positions  have  a  number  of  important  appli- 
cations when  one  doesn't  need  the  full  accuracy  of  an  integrated  ephemeris.  They 
are  often  used  in  observation  scheduling,  telescope  pointing,  and  prediction  of  cer- 
tain phenomena  as  well  as  in  the  planning  and  design  of  spacecraft  missions.  Also, 
they  are  more  easily  incorporated  into  a  computer  program. 

Classical  Keplerian  orbital  elements  are  given  in  Table  5,8.1.  The  approximate 
maximum  errors  over  the  period  1800-2050  are  shown  in  Table  5.8.2.  The  errors 
made  when  extrapolating  outside  this  interval  can  be  substantially  greater.  The 
errors  of  the  approximate  formulas  may  be  compared  to  those  of  the  integrated 
ephemerid  es,  DE200,  which  are  less  than  1  arcsecond  throughout  1800-2050,  often 
much  smaller. 


Table  5.8.1 

Classical  Keplerian  elements  at  the  epoch  J2000  (JED  2451545.0),  given  with  respect  to 
the  mean  ecliptic  and  equinox  of  J2000.  The  angles  are  in  degrees,  and  their  centennial 
rates  are  in  arcseconds  per  century.  The  six  elements  are  the  semi-major  axis, 
eccentricity,  inclination,  longitude  of  ascending  node,  longitude  of  perihelion,  and  mean 
longitude,  respectively 


a  e  t  .0  &  L 


Mercury 

0.38709893    0.20563069  7.00487  48.33167    77.45645  252.25084 

0.00000066    0.00002527  -23.51  -446.30       573.57  261628.29  +415  rev 

Venus 

0.72333199    0.00677323  3.39471  76.68069  131.53298  181.97973 

0.00000092  -0.00004938  -2.86  -996.89     -108.80  712136.06  +162rev 
E-M  barycenter 

1.00000011     0.01671022  0.00005  -11.26064  102.94719  100.46435 

-0.00000005  -0.00003804  -46.94  -18228.25     1198.28  1293740.63  +99  rev 

Mars 

1.52366231     0.09341233  1.85061  49.57854  336.04084  355.45332 

-0.00007221     0.00011902  -25.47  -1020.19     1560.78  217103.78  +53rev 

Jupiter 

5.20336301     0.04839266  1.30530  100.55615    14.75385  34.40438 

0.00060737  -0.00012880  -4.15  1217.17       839.93  557078.35  +8  rev 

Saturn 

9.53707032    0,05415060  2,48446  113.71504    92.43194  49.94432 

-0.00301530  -0.00036762  6.11  -1591.05  -1948.89  513052.95  +3  rev 
Uranus 

19.19126393    0.04716771  0.76986  74.22988  170.96424  313.23218 

0.00152025  -0.00019150  -2.09  1681.40     1312.56  246547. 79  + 1  rev 

Neptune 

30.06896348    0.00858587  1.76917  131.72169    44.97135  304.88003 

-0.00125196    0.00002514  -3.64  -151.25     -844.43  786449.21 

Pluto 

39.48168677    0.24880766  17.14175  110.30347  224.06676  238.92881 

-0.00076912    0.00006465  11.07  -37.33     -132.25  522747.90 


Table  5.8.2 

Approximate  maximum  errors  of  the  Keplerian  formulas  over  the 
interval  1800-2050,  given  in  heliocentric  right  ascension, 
declination,  and  distance. 


Right  Ascension       Declination  Distance 


["] 

[1000  km] 

["] 

[1 000  km] 

["] 

[1000  km] 

Mercury 

20 

6 

5 

1 

5 

1 

Venus 

20 

10 

5 

2 

20 

10 

Earth 

20 

15 

5 

4 

20 

15 

Mars 

25 

25 

30 

30 

40 

40 

Jupiter 

300 

1000 

100 

350 

200 

600 

Saturn 

600 

4000 

200 

1400 

600 

4000 

Uranus 

60 

800 

25 

400 

125 

2000 

Neptune 

40 

800 

20 

400 

100 

2000 

Pluto 

40 

1100 

10 

250 

70 

2000 

s  /  ORBITAL  EPHEMERIDES  OF  THE  SUN.  MOON,  AND  PLANETS  317 

s.9   BASIS  FOR  PRE-1 984  EPHEMERIDES 

prior  to  1984,  the  ephemerides  for  the  Sun,  Mercury,  Venus,  and  Mars  were  based 
on  the  theories  and  tables  of  Newcomb  (1898).  Computerized  evaluations  of  the 
tables  were  used  from  1960  through  1980.  From  1981  to  1983,  the  ephemerides 
•were  based  on  the  evaluations  of  the  theories  themselves.  The  ephemerides  of  the 
Sun  were  derived  from  the  algorithm  given  by  S,  Newcomb  in  Tables  of  the  Sun 
(Newcomb,  1898).  Newcomb's  theories  of  the  inner  planets  (1895-1898)  served  as 
the  basis  for  the  heliocentric  ephemerides  of  Mercury,  Venus,  and  Mars.  In  the  case 
of  Mars,  the  corrections  derived  by  F.E.  Ross  (1917)  were  applied. 

Ephemerides  of  the  outer  planets,  Jupiter,  Saturn,  Uranus,  Neptune,  and  Pluto, 
were  computed  from  the  heliocentric  rectangular  coordinates  obtained  by  numeri- 
cal integration  (Eckert  et  a/.,  1951).  Although  perturbations  by  the  inner  planets 
(Clemence,  1954)  were  included  in  the  printed  geocentric  ephemerides  of  the  outer 
planets,  they  were  omitted  from  the  printed  heliocentric  ephemerides  and  orbital 
elements. 

The  lunar  ephemeris,  designated  by  the  serial  number  j  =  2,  was  calculated 
directly  from  E.W.  Brown's  algorithm  instead  of  from  his  Tables  of  Motion  of  the 
Moon  (1919).  To  obtain  a  strictly  gravitational  ephemeris  expressed  in  the  measure 
of  time  defined  by  Newcomb's  Tables  of  the  Sun,  the  fundamental  arguments  of 
Brown's  tables  were  amended  by  removing  the  empirical  term  and  by  applying  to 
the  Moon's  mean  longitude  the  correction 

-  8'.'72  -  26!'74  T  -  1132  T2,  (5.9-1) 

where  7"  Is  measured  in  Julian  centuries  from  1900  January  0.5  ET  =  JED  2415020.0. 
In  addition,  this  ephemeris  was  based  on  the  IAU  (1964)  System  of  Astronomical 
Constants,  and  was  further  improved  in  its  precision  by  transformation  corrections 
(Eckert  et  al,  1966,  1969).  The  expressions  for  the  mean  longitude  of  the  Moon  and 
its  perigee  were  adjusted  to  remove  the  implicit  partial  correction  for  aberration 
(Clemence  et  al,  1952). 

5-91    Introduction  of  New  Constants 

In  1964  the  International  Astronomical  Union  adopted  the  1968  IAU  System  of 
Astronomical  Constants  (IAU  Trans.,  1966).  The  complete  list  of  these  constants, 
with  detailed  explanation,  reference  and  formulas  were  published  in  the  Supplement 
to  the  Astronomical  Ephemerides  1968,  which  was  reprinted  in  the  1974  edition  of 
the  Explanatory  Supplement. 

By  1970  it  was  recognized  that  the  ephemerides  being  used  for  the  national 
almanac  publications  required  improvements — that  the  fundamental  catalog  of  star 
Positions  (FK4)  should  be  replaced  by  a  new  fundamental  catalog  of  star  positions, 


318  EXPLANATORY  SUPPLEMENT 

that  better  values  were  known  for  some  astronomical  constants,  that  the  definition 
and  practical  realization  of  ephemeris  time  was  inadequate  and  inconsistent,  that 
atomic  time  was  available,  and  that  a  new  epoch  might  be  introduced  to  replace 
B1950.0. 

Since  the  necessary  changes  would  affect  many  aspects  of  astronomy,  it  was 
decided  to  introduce  as  many  changes  as  possible  at  one  time  in  a  consistent  system, 
rather  than  to  introduce  them  at  many  different  times  with  resulting  inconsistencies. 
Agreement  was  reached  that  all  changes  should  be  introduced  into  the  national 
publications  of  the  ephemerides  for  the  1984  editions,  and  that  the  changes  should 
be  effective  on  1984  January  1. 

The  changes  were  designed  to  be  the  best  that  can  be  achieved  on  the  basis 
of  current  knowledge  and  should  reduce  the  systematic  errors  between  theory  and 
observations  by  several  orders  of  magnitude.  However,  it  was  recognized  that  per- 
fection cannot  be  achieved  and  the  improvements  introduced  should  permit  the 
determination  of  further  improvements,  after  the  systematic  deviations  are  reduced 
by  the  present  improvements. 

The  new  resolutions  form  a  self-consistent  and  interrelated  system  of  changes 
necessary  to  improve  the  astronomical  reference  system.  The  resolutions  should 
not  be  introduced  individually  or  selectively.  They  must  be  implemented  simulta- 
neously. It  is  intended  that  whenever  the  new  standard  epoch  ( J2000.0)  is  used,  all 
the  computations  and  reductions  will  be  based  on  the  new  astronomical  constants 
and  resolutions.  Furthermore,  proper  utilization  of  such  data  requires  adherence  to 
the  resolutions  in  any  calculations  or  procedures. 

The  majority  of  the  resolutions  were  prepared  and  adopted  by  the  General  As- 
sembly of  the  IAU  at  the  1976  and  1979  meetings  {IAU  Trans.,  1977,  1980).  The 
1979  IAU  Theory  of  Nutation  was  adopted  at  the  1979  IAU  General  Assembly  to 
provide  an  improved  nutation  theory  for  astronomical  computations.  The  IUGG 
requested  that  the  IAU  reconsider  its  recommendations,  not  because  of  the  inade- 
quacy of  the  nutation  theory,  but  because  the  Earth  model  underlying  the  nutation 
theory  was  not  considered  an  adequate  model.  Although  differences  in  the  Earth's 
models  could  not  be  demonstrated  to  significantly  affect  the  nutation,  the  relevant 
commissions  of  the  IAU  have  adopted  the  1980  IAU  Theory  of  Nutation.  The  Final 
Report  of  the  Working  Group  on  Nutation  was  published  by  Seidelmann  (1982). 

The  origin  of  the  FK5  with  respect  to  the  FK4  was  specified  by  Fricke  (1982). 
The  new  definition  of  the  formula  relating  Greenwich  mean  sidereal  time  to  Uni- 
versal Time  was  published  by  Aoki  et  al.  (1982). 

The  formulation  using  the  new  constant  of  precession  was  published  by  Lieske 
et  al.  (1977)  and  Lieske  (1979). 

The  1976  IAU  System  of  Astronomical  Constants  is  given  in  Chapter  15.  The 
constants  used  in  the  creation  of  the  planetary  and  lunar  ephemerides,  DE200/LE200, 
are  also  given  in  Chapter  15.  These  are  not  all  identical  to  those  of  the  1976  IAU 
System,  for  it  had  become  apparent  in  fitting  the  ephemerides  to  the  observational 


g  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  319 

data,  that  it  was  necessary  to  adjust  some  of  the  constants  in  order  to  produce  a 
best-fit  in  the  least-squares  sense. 


510  REFERENCES 

Abbot,  ILL,  Shelus,  P.J.,  Mulholland,  J.D.,  and  Silberberg,  E.G.  (1973).  "Laser  Observa- 
tions of  the  Moon:  Identification  and  Construction  of  Normal  Points  for  1969-1971" 
Astron.  J.  78,  784-793. 

Adams,  A.N.,  Bestul,  S.M.,  and  Scott,  D.K.  (1964).  "Results  of  the  Six-Inch  Transit  Circle, 
1949-1956"  Publ.  U.S.  Naval  Obs.  XIX,  I. 

Adams,  A.N.  and  Scott,  D.K.  (1968).  "Results  of  Observations  Made  with  the  Six-Inch 
Transit  Circle,  1956-1962"  Publ  U.S.  Naval  Obs.  XIX,  II. 

Aoki,  S.,  Guinot,  B.,  Kaplan,  G.H.,  Kinoshita,  H.H.,  McCarthy,  D.D.,  and  Seidelmann, 
P.K.  (1982).  "The  New  Definition  of  Universal  Time"  Astron.  Astrophys.  105,  359- 
361. 

Bretagnon,  P.  (1980).  "Theorie  au  deuxieme  ordre  des  planetes  inferieures"  Astron.  As- 
trophys.  84,  329-341. 

Bretagnon,  P.  (1981).  "Construction  d'une  theorie  des  grosses  planetes  par  une  methode 

iterative"  Astron.  Astrophys.  101,  342-349. 
Bretagnon,  P.  and  Chapront,  J.  (1981).  "Note  sur  les  formules  pour  le  calcul  de  la 

precession"  Astron.  Astrophys.  103,  103-107. 
Bretagnon,  P.  (1982).  "Theorie  du  mouvement  de  I'  ensemble  des  planetes.  Solution 

VSOP82"  Astron.  Astrophys.  114,  278-288. 
Bretagnon,  P.  and  Chapront,  J.  (1982).  Private  communication  in  Standish  (1982a). 
Bretagnon,  P.  and  Francou,  G.  (1988).  "Planetary  Theories  in  Rectangular  and  Spherical 

Variables  VSOP  87  Solution"  Astron.  Astrophys.  202,  309-315. 
Brown,  E.W.  (1919).  Tables  of  the  Motion  of  the  Moon  (Yale  University  Press.  New  Haven, 

CT). 

Calame,  O.  and  Mulholland,  J.D.  (1978a).  "Lunar  Tidal  Acceleration  Determined  from 

Laser  Range  Measurements"  Science  199,  977-978. 
Calame,  O.  and  Mulholland,  J.D.  (1978b).  in  Tidal  Friction  and  the  Earth's  Rotation  P. 

Broche  and  J.  Sunderman,  eds.  (Springer,  New  York)  p.  43. 
Cappallo,  R.J.  (1980).  "The  Rotation  of  the  Moon"  Ph.D.  Thesis.  (MIT,  Cambridge). 
Cappallo,  R.J.,  King,  R.W.,  Couselman,  C.C.  Ill,  and  Shapiro,  LI.  (1981).  "Numerical 

Model  of  the  Moon's  Rotation"  Moon  and  Planets  24,  281-289. 
Chao,  C.C.  (1970).  "A  Preliminary  Estimation  of  Tropospheric  Influence  on  the  Range 

and  the  Range  Rate  Data  During  the  Closet  Approach  of  the  MM71  Mars  Mission" 

Jet  Prop.  Lab  Tech.  Memo  #391-129  (JPL,  Pasadena,  CA). 
Chapront,  J.  (1970).  "Construction  d'une  theorie  litterale  planetaire  jusqu'au  second  ordre 

des  masses"  Astron.  Astrophys.  7,  175-203. 
Chapront,  J.  and  Simon,  J.L.  (1972).  "Variations  seculaires  au  premier  ordre  des  elements 

des  quatre  grosses  planetes.  Comparaison  avec  Le  Verrier  et  Gaillot"  Astron.  Astro- 
phys. 19,  231-234. 

Chapront-Touze,  M.  (1980).  "La  solution  ELP  du  probteme  central  de  la  Lune"  Astron. 
Astrophys.  83,  86-94. 

Chapront-Touze,  M.  and  Chapront,  J.  (1980).  "Les  perturbations  planetaires  de  la  Lune" 
Astron.  Astrophys.  91,  233-246. 


320 


EXPLANATORY  SUPPLEMENT 


Chapront-Touze,  M.  and  Chapront,  J.  (1983).  "The  Lunar  Ephemeris  ELP  2000"  Astron. 
Astrophys.  124,  50-62. 

Chapront-Touze,  M.  and  Chapront,  J.  (1988).  "ELP  2000-85;  a  Semi-analytical  Lunar 
Ephemeris  Adequate  for  Historical  Times"  Astron.  Astrophys.  190,  342-352, 

Chollet,  F.  (1984).  "Evaluation  des  corrections  de  phase  dans  1'observation  des  positions 
des  planetes"  Astron.  Astrophys.  139,  215-219. 

Clemence,  G.M.  (1954).  "Perturbations  of  the  Five  Outer  Planets  by  the  Four  Inner 
Ones"  in  Astronomical  Papers  American  Ephemeris  (U.S.  Government  Printing  Of- 
fice, Washington,  DC). 

Clemence,  G.M.,  Porter,  J.G.,  and  Sadler,  D.H.  (1952).  "Aberration  in  the  Lunar  Ephem- 
eris" Astron.  J.  57,  46-47. 

Davies,  M.E.,  Abalakin,  V.K.,  Lieske,  J.H.,  Seidelmann,  P.K.,  Sinclair,  AT.,  Sinzi,  A.M., 
Smith,  B.A.,  and  Tjuflin,  Y.S.  (1983).  "Report  of  the  IAU  Working  Group  on  Car- 
tographic Coordinates  and  Rotational  Elements  of  the  Planets  and  Satellites:  1982" 
Cel.  Mech.  29,  309-321. 

Dickey,  J.O.,  Williams,  J.G.,  and  Yoder,  C.F.  (1982).  "High-Precision  Earth  Rotation  and 
Earth-Moon  Dynamics:  Lunar  Distances  and  Related  Observations"  in  Proc.  IAU 
Coll.  63,  0.  Calame,  Ed.  (Reidel,  Dordrecht,  Holland)  p.  209. 

Dickey,  J.O.  and  Williams,  J.G.  (1982).  "Geophysical  Applications  of  Lunar  Laser  Rang- 
ing" EOS  63,  301. 

Duncombe,  R.L.  (1969).  "Heliocentric  Coordinates  of  Ceres,  Pallas  Juno,  Vesta  1928- 
2000"  Astronomical  Papers  American  Ephemeris  XX  part  II  (U.S.  Government  Print- 
ing Office,  Washington,  DC), 

Eckert,  W.,  Brouwer,  D-,  and  Clemence,  G.M.  (1951).  "Coordinates  of  the  Five  Outer 
Planets  1953-2060"  in  Astronomical  Papers  American  Ephemerides  XII  (U.S.  Gov- 
ernment Printing  Office,  Washington,  DC). 

Eckert,  W.J.,  Walker,  M.J.,  and  Eckert,  D.D.  (1966).  "Transformation  of  the  Lunar  Co- 
ordinates and  Orbital  Parameters"  Astron.  J.  71,  314-332. 

Eckert,  W.J.,  Van  Flandern,  T.C.,  and  Wilkins,  G.A.  (1969).  "A  Note  on  the  Evaluation 
of  the  Latitude  of  the  Moon"  Mon  Not.  R.A.S.  146,  473-478. 

Estabrook,  F.B.  (1971).  "Derivations  of  Relativistic  Lagrangian  for  n-Body  Equations 
Containing  Relativity  Parameters  b  and  c"  JPL  Internal  Communications 

Explanatory  Supplement  to  the  Astronomical  Ephemeris  and  the  American  Ephemeris  and 
Nautical  Almanac  (H.M.  Stationery  Office,  London),  1961. 

Ferrari,  A. J.,  Sinclair,  W.S.,  Sjogren,  W.J.,  Williams,  J.G.,  and  Yoder,  C.F.  (1980).  "Geo- 
physical Parameters  of  the  Earth-Moon  System"  J.  Geophys.  Res.  85,  3939-3951. 

Fricke,  W.  (1971).  "A  Rediscussion  of  Newcomb's  Determination  of  Precession"  Astron. 
Astrophys.  13,  298-308. 

Fricke,  W.  (1982).  "Determination  of  the  Equinox  and  Equator  of  the  FK5"  Astron.  As- 
trophys. 107,  L13-L16. 

Goldstein,  H.  (1950).  Classical  Mechanics  (Addison- Wesley,  Reading,  MA). 

Hammond,  J.C.  and  Watts,  C.B.  (1927).  "Results  of  Observations  with  the  Six-Inch  Tran- 
sit Circle,  1909-1918"  Publ.  U.S.  Naval  Obs.  XI. 

Hellings,  R.W.  (1986).  "Relativistic  Effects  in  Astronomical  Timing  Measurements"  As- 
tron. J.  92,  650-659. 

Hughes,  J.A.  and  Scott,  D.K.  (1982).  "Results  of  Observations  Made  with  the  Six-Inch 

Transit  Circle,  1963-1971"  Publ.  U.S.  Naval  Obs.  XXIII,  part  III. 
Ianna,  P.A.  (1974,  1980).  Private  communication. 


5  /  ORBITAL  EPHEMERIDES  OF  THE  SUN,  MOON,  AND  PLANETS  321 

Krogh,  p,T.  (1972).  Lecture  Notes  in  Mathematics,  362  (Springer- Verlag,  New  York)  p. 
22. 

Laskar,  J-  (1986).  "Secular  Terms  of  Classical  Planetary  Theories  Using  the  Results  of 
General  Theory"  Astron.  Astrophys.  157,  59-70. 

Lieske,  J-H.  (1979).  "Precession  Matrix  Based  on  IAU  (1976)  System  of  Astronomical 
Constants"  Astron.  Astrophys.  73,  282-284. 

Lieske,  J.H.,  Lederle,  T.,  Fricke,  W.,  and  Morando,  B.  (1977).  "Expressions  for  the  Pre- 
cession Quantities  Based  upon  the  IAU  (1976)  System  of  Astronomical  Constants" 
Astron.  Astrophys.  73,  282-284. 

Lindegren,  L.  (1977).  "Meridian  Observations  of  Planets  with  a  Photoelectric  Multislit 
Micrometer"  Astron.  Astrophys.  57,  55-72. 

Lyttleton,  R.A.,  Cain,  D.L.,  and  Liu,  A.S.  (1979).  JPL  Publication  79-85  (JPL,  Pasadena, 
CA). 

Marsden,  B.G.,  Sekanina,  Z.,  and  Yeomans,  D.K.  (1973).  "Comets  and  Nongravitational 
Forces  V."  Astron.  J.  78,  211-115. 

Morgan,  H.R.  (1933).  "Results  of  Observations  with  the  Nine-Inch  Transit  Circle,  1913- 
1926"  Publ.  U.S.  Naval  Obs.,  XIII. 

Morgan,  H.R.  and  Scott,  F.P.  (1948).  "Results  of  Observations  made  with  the  Nine-Inch 
Transit  Circle,  1935-1945"  Publ.  U.S.  Naval  Obs.,  XV,  part  V. 

Mover,  T.D.  (1971).  "Mathematical  Formulation  of  the  Double-Precision  Orbit  Determi- 
nation Program  (DPODP)"  Jet  Prop.  Lab.  Tech.  Report  #32-1527  (JPL,  Pasadena, 
CA). 

Moyer,  T.D.  (1981).  "Transformation  from  Proper-Time  on  Earth  to  Coordinate  Time  in 
Solar-System  Barycenter  Spacetime  Frame  of  Reference  I,  II"  Cel.  Mech.  23,  33-56, 
57-68. 

Muhleman,  D.O.  and  Anderson,  J.A.  (1981).  "Solar  Wind  Electron  Densities  from  Viking 

Dual  Frequency  Radio  Measurements"  Astrophys.  J.  247,  1093-1101. 
Mulholland,  J.D.,  Shelus,  P.J.,  and  Silverberg,  E.C.  (1975).  "Laser  Observations  of  the 

Moon:  Normal  Points  for  1973"  Astron.  J.  80,  1087-1093. 
Murray,  C.  A.  (1989).  "The  Transformation  of  Coordinates  Between  the  Systems  of  B1950.0 

and  J2000.0,  and  the  Principal  Galactic  Axes  Referred  to  J2000.0"  Astron.  Astrophys. 

218,  325-329. 

Newcomb,  S.  (1898).  "Tables  of  Motion  of  the  Earth  on  its  Axis  and  Around  the  Sun" 
in  Astronomical  Papers  American  Ephemeris  VI,  part  I  (U.S.  Government  Printing 
Office,  Washington,  DC). 

Newcomb,  S.  (1898).  "Tables  of  the  Heliocentric  Motion  of  Mercury"  in  Astronomical  Pa- 
pers American  Ephemeris  VI,  part  II  (U.S.  Government  Printing  Office,  Washington, 
DC). 

Newcomb,  S.  (1898).  "Tables  of  Heliocentric  Motion  of  Venus"  in  Astronomical  Papers 
American  Ephemeris  VI,  part  III  (U.S.  Government  Printing  Office,  Washington, 
DC). 

Newcomb,  S.  (1898).  "Tables  of  the  Heliocentric  Motions  of  Mars"  in  Astronomical  Papers 
American  Ephemeris  VI,  part  IV  (U.S.  Government  Printing  Office,  Washington,  DC). 

Newhall,  XX,  Standish,  E.M.,  and  Williams,  J.G.  (1983).  "DE102:  a  Numerically  Inte- 
grated Ephemeris  of  the  Moon  and  Planets  Spanning  Forty-Four  Centuries"  Astron. 
Astrophys.  125,  150-167. 

Newhall,  XX,  Williams,  J.G.,  and  Dickey,  J.O.  (1989).  "Earth  Rotation  from  Lunar  Laser 
Ranging"  IAU  Symposium  128  (Coolfont,  West  Virginia). 


322 


EXPLANATORY  SUPPLEMENT 


Newhall,  XX  (1989).  "Numerical  Representation  of  Planetary  Ephemerides"  Cel.  Mech 

45,  305-310. 
Null,  G.W.  (1976).  Private  communication. 

Null,  G.W.  (1978).  "Programmer  Information  for  the  Saturn  Satellite  Ephemeris  'PARSAT 
1108  Software  Package"  Jet  Prop.  Lab  Interoffice  Memo  314.7-252  (using  date  element 
#360)  (JPL,  Pasadena,  CA). 

Reasenberg,  R.D.  and  King,  R.W.  (1979).  "The  Rotation  of  Mars"  J.  Geophys.  Res.  84, 
no.  811,  6231-6240. 

Richter,  G.W.  and  Matzner,  R.A.  (1983).  "Second-Order  Contributions  to  Relativistic 
Time  Delay  in  the  Parameterized  Post-Newtonian  Formalism"  Phy.  Rev  D.  28,  3Q07- 
3012. 

Rivlin,  T.J.  (1974).  The  Chebyshev  Polynomials  (John  Wiley  &  Sons,  New  York). 

Ross,  F.E.  (1917).  "New  Elements  of  M  ars"  Astronomical  Papers  American  Ephemeris 

IX,  part  II  (U.S.  Government  Printing  Office,  Washington,  DC). 
Schmidt,  R.E.,  Corbin,  T.E.,  and  Van  Flandern,  T.C.  (1980).  "New  USNO  Zodiacal  Star 

Catalog"  Bull.  Amer.  Astron.  Soc.  12,  740. 
Schwan,  H.  (1977).  "Development  and  Testing  of  a  Method  to  Derive  an  Instrumental  Sys- 
tem of  Positions  and  Proper  Motions  of  Stars"  Veroffentlichungen  27,  Astronomisches 

Rechen-Institut,  Heidelberg. 
Seidelmann,  PK.  (1982).  "1980  IAU  Theory  of  Nutation:  The  Final  Report  of  the  IAU 

Working  Group  on  Nutation"  Cel.  Mech.  27,  79-106. 
Shapiro,  I.I.  (1964).  "Fourth  Test  of  General  Relativity"  Phys.  Rev.  Letters  13,  789-791. 
Shapiro,  I.I.,  Counselmann,  C.C.,  III,  and  King,  R.W.  (1976).  "Verification  of  the  Principle 

of  Equivalence  for  Massive  Bodies"  Phys.  Rev.  Letters  36,  555-558. 
Shelus,  P.J.,  Mulholland,  J.D.,  and  Silverberg,  E.C.  (1975).  "Laser  Observations  of  the 

Moon,  Normal  Points  for  1972"  Astron.  J.  80,  154-161. 
Simon,  J.L.  and  Chapront,  J.  (1974).  "Perturbations  du  second  ordre  des  planetes  Jupiter 

et  Saturne:  Comparaison  avec  Le  Verrier"  Astron.  Astrophys.  32.  51-64. 
Simon,  J.L.  and  Bretagnon,  P.  (1975).  "Perturbations  du  premier  ordre  des  quatre  grosses 

planetes:  Variations  litterales"  Astron.  Astrophys.  42,  259-263. 
Simon,  J.L.  and  Bretagnon,  P.  (1975).  "Resultats  des  perturbations  du  premier  ordre  des 

quatre  grosses  planetes:  Variations  Litterales"  Astron.  Astrophys.  Suppl  22,  107-160. 
Simon,  J.L.  and  Bretagnon.  P.  (1978).  "Perturbations  du  deuxieme  ordre  des  quatre 

grosses  planetes:  Variations  seculaires  du  demi  grand  axe"  Astron.  Astrophys.  69. 

369-372. 

Simon,  J.L.  and  Bretagnon,  P.  (1978).  "Resultats  des  perturbations  du  deuxieme  ordre 

des  quatre  grosses  planetes"  Astron.  Astrophys.  Suppl.  34,  183-194. 
Simon,  J.L.  and  Francou,  G.  (1982).  "Amelioration  des  theories  de  Jupiter  et  Saturne  par 

analyse  harmonique"  Astron.  Astrophys.  114,  125-130. 
Simon,  J.L.  (1983).  "Theorie  du  mouvement  des  quatre  grosses  planetes.  Solution  TOP82" 

Astron.  Astrophys.  120,  197-202 
Simon,  J.L.  and  Bretagnon,  P.  (1984).  "Theorie  du  mouvement  de  Jupiter  et  Saturne 

sur  un  intervalle  de  temps  de  6000  ans.  Solution  JASON84"  Astron.  Astrophys.  138, 

169-178. 

Standish,  E.M.  (1973).  "The  Figure  of  Mars  and  its  Effect  on  Radar-ranging"  Astron. 

Astrophys.  26,  463-466. 
Standish,  E.M.,  Keesey,  M.S.W.,  and  Newhall,  XX  (1976).  "JPL  Development  Ephemeris 

Number  96"  Jet  Prop  Lab  Tech.  Report  32-1603  (JPL,  Pasadena,  CA). 


ORBITAL  EPHEMERIDES  OF  THE  SUN.  MOON.  AND  PLANETS  323 

andish,  E.M.  (1981).  "Two  Differing  Definitions  of  the  Dynamical  Equinox  and  the 

Mean  Obliquity"  Astron.  Astrophys.  101,  L17-L18, 
andish,  E.M.  (1982a).  "Orientation  of  the  JPL  Ephemerides,  DE200/LE200,  to  the 

Dynamical  Equinox  of  J2000"  Astron.  Astrophys.  114,  297-302. 
andish,  E.M.  (1982b).  "The  JPL  Planetary  Ephemerides"  Cel.  Mech.  J.  26,  181-186. 
Standish,  E.M.  (1985).  "Numerical  Planetary  and  Lunar  Ephemerides:  Present  Status, 
Precision  and  Accuracies"  in  Relativity  in  Celestial  Mechanics  and  Astrometry  J. 
Kovalevsky  and  V.A.  Brumberg,  eds.  (Reidel,  Dordrecht,  Holland)  pp.  71-83. 
Standish,  E.M.  (1990).  "The  Observational  Basis  for  JPL's  DE200,  the  Planetary  Ephem- 
erides of  the  Astronomical  Almanac"  Astron.  Astrophys.  233,  252-271. 
USNO  (1984).  "The  Astronomical  Almanac  for  the  Year  1984"  (U.S.  Government  Printing 

Office,  Washington,  DC,  H.M.  Stationery  Office,  London). 
Watts,  OB.  and  Adams,  A.N.  (1949).  "Results  of  Observations  Made  with  the  Six-Inch 

Transit  Circle,  1925-1941"  Publ.  U.S.  Naval  Obs.  XVI,  part  I. 
Watts,  C.B.,  Scott,  F.P.,  and  Adams,  A.N.  (1952).  "Results  of  Observations  Made  with 

the  Six-Inch  Transit  Circle,  1941-1949"  Publ.  U.S.  Naval  Obs.  XVI,  Part  III. 
Will,  CM.  (1974).  Experimental  Gravitation  B.  Bertotti,  ed.  (Academic  Press,  New  York). 
Williams,  J.G.,  Sinclair,  W.S.,  and  Yoder,  OF.  (1978).  "Tidal  Acceleration  of  the  Moon" 

Geophys.  Res.  Letters  5,  943-946. 
Williams,  J.G.,  Dicke,  R.H.,  Bender,  P.L.,  Alley,  CO.,  Carter  W.E.,  Currie,  D.G.,  Eck- 
hardt,  D.H.,  Fluer,  J.E.,  Kaula,  W.M.,  Mulholland,  J.D.,  Plotkin,  H.H.,  Peultney, 
S.K.,  Shelus,  P.J.,  Silverberg,  E.C,  Sinclair,  W.S.,  Slade,  M.A.,  and  Wilkinson,  D.T. 
(1976).  "New  Test  of  the  Equivalence  Principle  from  Lunar  Laser  Ranging"  Phys. 
Rev.  Letters  36,  551-554. 
Williams,  J.G.,  Slade,  M.A.,  Eckhardt,  D.H.,  and  Kaula,  W.M.  (1973).  "Lunar  Physical 

Librations  and  Lunar  Laser  Ranging"  Moon  8,  469-483. 
Williams,  J.G.  (1984).  "Determining  Asteroid  Masses  from  Perturbations  on  Mars"  Icarus 
57,  1-13. 

Williams,  J.G.  and  Standish,  E.M.  (1989).  "Dynamical  Reference  Frames  in  the  Planetary 
and  Earth-Moon  Systems"  in  Reference  Frames  J.  Kovalevsky,  I  Mueller,  and  B. 
Kolaczek,  eds.  (Kluwer,  Dordrecht,  Holland)  67-90. 

Yeomans,  D.K.  and  Chodas,  P.W.  (1989).  "An  Asymmetric  Outgassing  Model  for  Cometary 
Nongravitational  Accelerations"  Astron.  J.  98,  1083-1093. 

Yoder,  C.F.  (1979).  "Effects  of  the  Spin-Spin  Interaction  and  the  Inelastic  Tidal  Defor- 
mation on  the  Lunar  Physical  Librations"  in  Natural  and  Artificial  Satellite  Motion 
P.  Nacozy  and  S.  Ferrez-Mello,  eds.  (University  of  Texas  Press,  Austin)  p.  211. 


CHAPTER 


Orbital  Ephemerides  and  Rings  of  Satellites 

by  James  R.  Rohde  with  Andrew  Sinclair 


6.1  INTRODUCTION 

The  ephemerides  of  most  satellites  in  The  Astronomical  Almanac  are  calculated 
from  a  set  of  analytical  expressions,  termed  a  "theory,"  for  the  motion  of  the  satellite 
in  an  orbit  that  is  basically  an  ellipse,  but  subject  to  various  perturbing  forces,  such 
as  the  oblateness  of  the  planet  and  the  attractions  of  other  satellites  and  the  Sun. 
The  orbits  of  the  outer  satellites  of  Jupiter  are  highly  perturbed  and  representations 
by  theories  are  not  sufficiently  accurate.  In  these  cases  numerical  integrations  of  the 
equations  of  motion  of  the  satellites  are  used. 

The  objective  of  this  chapter  is  to  describe  the  theory  of  the  motion  of  each  of 
the  principal  satellites  in  enough  detail  for  search  and  identification  purposes.  In 
many  cases,  a  description  of  the  complete  theory  that  can  be  used  for  the  precise 
analysis  of  observations  is  given,  but  in  cases  where  the  theories  contain  large 
numbers  of  periodic  terms,  only  an  outline  of  the  theory  is  given,  together  with 
references  to  where  the  complete  theory  can  be  found. 

Data  tables  for  all  of  the  known  satellites  can  be  found  in  Chapter  15.  Table 
15.9  presents  orbital  data;  Table  15.10  gives  physical  and  photometric  data;  and 
Table  15.11  presents  north  poles  of  rotation  and  prime  meridian  data. 

An  alternative  to  Section  F  in  The  Astronomical  Almanac,  called  The  Satellite 
Almanac,  is  available  on  diskette.  The  Satellite  Almanac  is  a  program  for  MS- 
DOS  based  microcomputers  that  runs  on  the  IBM  PC  computers  and  compatible 
machines.  The  time  span  of  the  Satellite  Almanac  is  currently  1990  December  28 
to  2000  January  5. 

6'11    Orbital  Elements 

In.  this  section  we  use  a  fairly  common  notation  to  define  the  osculating  elements, 
formulas,  and  transformations.  The  orientation  of  the  orbital  plane  relative  to  a 

325 


326 


EXPLANATORY  SUPPLEMENT 


Z 


(Ascending 
node  of 
orbit) 


Figure  6.11.1 

The  orbital  elements  used  to  describe  the  orbital  plane  relative 
to  a  reference  plane  and  an  origin  of  longitude  O. 


Figure  6.11.2 

An  equivalent  form  of  the  orbital  elements.  The  end-on  view  of  a  great  circle  on 
the  celestial  sphere  is  represented  as  a  straight  line.  Triangles  formed  by  such 
lines  are  spherical  triangles,  and  the  formulas  of  spherical  trigonometry  apply. 


reference  plane  and  origin  are  described  by  three  elements,  which  are  shown  in 
Figures  6.11.1  and  6.11.2.  These  elements  are 

uj  -  argument  of  the  pericenter, 
f?  =  longitude  of  the  ascending  node, 
i  =  inclination. 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  327 

In  addition,  the  size  and  shape  of  the  orbit  are  described  by  the  semi-major  axis 
a  and  eccentricity  e.  The  position  of  the  satellite  along  the  orbit,  measured  from 
the  pericenter,  is  described  by  the  mean  anomaly  M  or  the  true  anomaly  /.  The 
difference  /  -  M  is  known  as  the  equation  of  center.  The  equation  of  center  can  be 
approximated  to  sufficient  accuracy  for  the  satellites  by 

j  -  M  -  \  2e  -  -e3J  s'mM+  -e2sin2Af  +  — e3sin3M.  (6.11-1) 

For  many  satellites  the  pericenter  is  ill-defined  since  e  is  small,  or  the  node  is  ill- 
defined  since  /'  is  small.  In  the  former  case  it  is  usual  to  use  the  quantity  A,  rather 
than  M,  and  in  the  latter  case  the  quantity  zo,  rather  than  u>,  where 

A  =  M  +  u>  +  J?       (the  mean  longitude), 

S7  =  W  +  j?  (the  longitude  of  pericenter) .  (6.11-2) 


6.12   Secular  Perturbations  of  the  Orbit 

If  the  orbit  were  unperturbed,  then  all  the  elements  would  remain  constant  except 
the  mean  anomaly  M,  which  would  increase  at  a  constant  rate  n,  the  mean  motion 
of  the  satellite.  For  a  perturbed  orbit  the  same  elliptical  model  can  be  used,  but  the 
orbital  elements,  now  called  osculating  elements,  are  functions  of  time,  typically  of 
the  form  of  a  constant  plus  periodic  terms.  In  addition,  the  angular  elements  can 
have  a  linear  (or  secular)  variation  with  time.  The  form  of  the  expressions  for  the 
osculating  elements  depends  on  the  reference  plane  chosen.  The  oblateness  of  the 
planet  causes  the  pole  of  the  orbital  plane  to  precess  around  the  pole  of  the  planet, 
and  solar  perturbations  cause  it  to  precess  around  the  pole  of  the  planet's  orbit. 
Perturbations  by  other  satellites  cause  precession  around  the  poles  of  their  orbital 
planes,  but  usually  this  effect  is  smaller  than  the  other  two  effects.  Because  the 
satellites'  orbital  poles  are  usually  close  to  the  pole  of  the  planet,  their  effect  is 
primarily  an  addition  to  the  oblateness  effect.  The  Laplacian  plane  is  the  reference 
plane  about  whose  axis  the  satellite's  orbit  precesses  as  a  result  of  these  two  major 
effects.  The  axis  of  the  Laplacian  plane  is  coplanar  with  and  between  the  polar 
and  orbital  axes  of  the  planet.  Hence  the  node  of  the  orbit  regresses  around  a  plane 
that  lies  between  the  equatorial  and  orbital  planes  of  the  planet,  and  has  a  common 
line  of  intersection  with  the  planes.  The  orbit  maintains  a  constant  inclination  to 
the  Laplacian  plane  (apart  from  other,  usually  smaller  perturbing  effects).  The 
Laplacian  plane  is  also  known  as  the  invariable  plane  through  the  planet. 

The  location  of  the  Laplacian  plane  is  shown  in  Figure  6.12.1.  It  divides  the 
angle  between  the  equatorial  and  orbital  planes  into  parts  /   and  fj,  where 


2n2JZfi  sin  2(2  "  aV2(l  -  e'2)'112  sin  2/, , 


(6.12-1) 


328 


EXPLANATORY  SUPPLEMENT 


Figure  6.12.1 

The  Laplacian  plane 


where  J2  is  the  oblateness  coefficient  of  the  planet;  ro  is  the  equatorial  radius  of  the 
planet;  n'  is  the  orbital  mean  motion  of  the  planet;  e'  is  the  orbital  eccentricity  of 
the  planet;  and  n  is  the  mean  motion  of  the  satellite. 

Apart  from  small  short-period  perturbations,  the  motion  of  the  satellite's  orbit 
relative  to  the  Laplacian  plane  is  such  that 

7  =  constant. 

(6.12-2) 

e  =  0o-K{t-  t0), 

where  7  is  the  inclination  of  the  satellite's  orbit  to  the  Laplacian  plane,  and  9  is 
the  arc  reckoned  from  the  intersection  of  the  planet's  equatorial  and  orbital  planes 
along  the  Laplacian  plane  to  the  node  of  the  satellite's  orbit  on  the  Laplacian  plane. 
However,  it  is  usually  more  convenient  to  take  a  plane  other  than  the  Laplacian 
plane  as  the  reference  plane,  as  it  eases  the  calculation  of  perturbations  by  other 
objects,  and  also  eases  the  transformation  of  the  calculated  position  to  a  reference 
frame  based  on  the  Earth's  equator  (which  is  needed  for  comparison  with  observa- 
tions). If,  for  example,  the  orbital  plane  of  the  planet  in  Figure  6.12.1  is  taken  as 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  329 

the  reference  plane,  then  the  osculating  inclination  and  longitude  of  the  node  will 
be  the  angles  i  and  Q.  The  formulas  of  spherical  trigonometry  give 

sin  /  sin(f?  -  fi\ )  -  sin  7  sin  0, 

(6.12-3) 

sin  / co&(Q  —  J?i)  =  cos  7  sin  i  +  sin  7  cos  i\  cos  9, 

where  i\,  0\  are  the  inclination  and  longitude  of  the  node  of  the  Laplacian  plane 
relative  to  the  adopted  reference  plane;  and  7  and  9  are  defined  above.  In  most 
cases  7  is  small,  and  so  (SI  -  S7\)  is  small  as  well.  Thus  the  following  approximate 
formulas  are  obtained: 

i  =  I,  +  7  cos  9, 
Q  =  Qi  +7sin0/sini'i.  (6.12-^) 

Hence  the  use  of  a  reference  plane  other  than  the  Laplacian  plane  introduces  a 
periodic  oscillation  into  the  osculating  inclination  and  longitude  of  the  node.  Note 
that  j'i  and  J7i  are  quantities  whose  values  are  determined  by  the  physical  prop- 
erties of  the  system.  The  arbitrary  constants  associated  with  the  inclination  and 
node  are  the  quantities  7  and  the  phase  of  9.  This  choice  of  reference  plane  also 
introduces  a  periodic  variation,  equal  to  the  angular  difference  fi  -  fi\  -9,  into 
the  longitude  of  the  pericenter  and  the  mean  longitude.  This  periodic  variation  is 
given  approximately  by 

Aw,  AA  =  7tan  ^j'i  sinfl.  (6.12-5) 

For  most  satellites  the  oblateness  effect  on  the  orbital  plane  is  much  larger  than 
the  solar  perturbations,  and  so  the  Laplacian  plane  is  very  close  to  the  equatorial 
plane.  For  a  more  distant  satellite,  such  as  Iapetus,  the  effects  are  comparable,  so 
the  Laplacian  plane  lies  about  midway  between  the  equatorial  and  orbital  planes. 
For  the  Moon,  the  solar  perturbations  dominate,  and  the  Laplacian  plane  virtually 
coincides  with  the  Earth's  mean  orbital  plane — the  ecliptic. 

The  oblateness,  solar,  and  other  perturbations  also  cause  secular  variations  of 
the  longitude  of  pericenter  (in  most  cases  the  pericenter  advances  around  the  orbit) 
and  of  the  mean  longitude  of  the  satellite,  so  that  the  mean  motion  in  longitude  is 
different  from  (generally  greater  than)  the  value  derived  from  Kepler's  law  for  an 
unperturbed  orbit.  It  is  this  overall  rate  of  motion  that  is  quoted  as  the  satellite's 
mean  motion,  and  it  is  thus  an  observed  mean  motion.  Hence,  when  using  the  mean 
motion  to  determine  the  mass  of  the  planet  from  Kepler's  law,  one  must  allow  for 
the  part  of  it  due  to  secular  perturbations. 


330  EXPLANATORY  SUPPLEMENT 

It  is  useful  to  note  in  this  context  that  the  semi-major  axis  of  the  orbit  is 
affected  in  a  similar  way.  The  various  perturbing  forces  cause  perturbations  of  the 
eccentricity  and  the  longitude  of  the  pericenter  of  the  form 

Ae  -  A  cos  M, 

(6.12-6) 

e Aw  -  A  sin  M, 

The  effect  of  these  terms  on  the  true  longitude  is  zero  to  first-order.  The  perturba- 
tion of  the  distance  r  arising  from  Ae  and  Aw  is  obtained  from 

r  -  a(l  -  eco&M),  (6.12-7) 

with  M  =  A  —  w. 

Differentiating  Equation  6.12-7,  we  have 

Ar  =  —a  cosMAe  —  ae  sinMAzu 

(6.12-8) 

=  -aA. 

It  is  the  normal  practice  to  ignore  these  terms  in  e  and  w,  and  to  determine  the 
value  of  the  semi-major  axis  from  observations  that  will  absorb  the  constant  term. 
This  must  be  allowed  for  when  computing  the  mass  of  the  planet  from  Kepler's  [aw. 


6. 1 3   Perturbations  due  to  Cornmensurabilities 

There  are  many  instances  of  pairs  of  satellites  with  mean  motions,  n  and  n' ,  having 
a  relationship  of  the  form 

pn  =  qn',  (6.13-1) 

where  p  and  q  are  two  small  integers.  Such  a  situation  is  called  a  commensura- 
bility  of  mean  motions  or,  more  simply,  an  orbital  resonance,  because  it  causes 
increased  mutual  perturbations.  This  resonance  effect  is  caused  by  a  repeated  geo- 
metric relationship  of  the  positions  of  the  two  satellites  (their  longitudes)  relative 
to  a  particular  point  in  their  orbits.  This  point  is  usually  the  pericenter  of  one  of 
the  satellites,  but  for  Mimas- Tethys  it  is  the  midpoint  of  their  nodes  on  the  equator 
of  Saturn.  We  shall  take  as  an  example  the  case  where  the  commensurability  is 

2«'-n-*  =  0.  (6.13-2) 

The  prime  refers  to  the  outer  satellite,  and  w  is  the  secular  rate  of  change  of  the 
longitude  of  the  pericenter  of  the  inner  satellite,  caused  by  the  oblateness  of  the 


6  /  ORBITAL  EPHEMER1DES  AND  RINGS  OF  SATELLITES  331 

planet,  other  perturbations,  and  by  the  resonance  itself.  As  a  result  the  angular 
argument 

e  =  2\'-\-w  (6.13-3) 

varies  very  slowly.  If  0  either  increases  or  decreases  continually,  then  the  motion  is 
termed  circulation,  because  the  position  of  conjunctions  of  the  satellites  circulates 
around  their  orbits,  and  in  this  case  the  mutual  perturbations  are  not  particularly 
large.  In  many  cases,  however,  the  average  rate  of  change  of  8  is  zero,  and  the  value 
of  e  oscillates  about  either  0°  or  180°,  depending  on  the  type  of  commensurability. 
This  type  of  motion  is  termed  Hbration.  In  this  example,  the  libration  is  about  0°, 
and  we  can  write  8  as 

8  =  (A  -  w)  -  2(A  -  A')  =  0°  +  oscillation.  (6.13^4) 

At  a  conjunction  of  the  satellites,  A  -  A'  =  0,  and  so  A  -  w  will  be  close  to  zero  also, 
and  hence  all  conjunctions  occur  near  the  pericenter  of  the  inner  satellite  orbit.  As 
might  be  expected,  this  particular  type  of  resonance  has  a  significant  perturbing 
effect  on  the  longitudes  of  the  two  satellites,  and  on  the  longitude  of  pericenter 
and  eccentricity  of  the  inner  satellite.  If  the  libration  amplitude  is  small,  then  the 
libration  can  be  represented  adequately  by  a  single  periodic  term;  e.g., 

0  =  O°+Bsin(/?f  +  £).  (6.13-5) 

If  the  amplitude  is  large,  e.g.,  for  the  Titan-Hyperion  and  Mimas-Tethys  resonances, 
then  a  Fourier  series  is  needed  to  represent  the  libration.  The  amplitude  B  and 
phase  e  of  the  libration  are  the  arbitrary  constants  associated  with  s  and  w.  The 
libration  frequency  (3  is  a  function  of  the  masses  of  the  satellites,  the  closeness  of 
the  commensurability,  and  the  libration  amplitude  if  it  is  large. 

The  principal  effects  of  this  resonance  on  the  orbit  are  to  cause  perturbations 
of  the  longitudes  of  the  satellites  with  the  period  of  the  hbration,  and  to  cause 
a  forced  component  of  the  eccentricity,  whose  magnitude  depends  on  the  mass 
of  the  perturbing  satellite  and  the  closeness  of  the  commensurability.  This  forced 
component  is  usually  the  largest  component  of  the  eccentricity. 

The  cornmensurabilities  that  are  of  most  significance  in  the  satellite  systems 
are  listed  in  Table  6.13.1.  In  addition  many  of  the  features  of  the  rings  of  Saturn  are 
associated  with  cornmensurabilities  with  satellites.  Some  of  the  newly  discovered 
small  satellites  of  Saturn  are  in  1:1  cornmensurabilities  with  the  major  satellites. 
These  cornmensurabilities  cause  the  small  satellites  to  follow  or  precede  the  major 
satellites  by  60°  in  their  orbits.  The  2:1  cornmensurabilities  among  the  Galilean 
satellites  Io,  Europa,  and  Ganymede  are  closely  associated  with  the  Laplace  com- 
mensurability that  affects  all  three  satellites,  as  a  result  of  which  the  long-term  mean 
value  of  (n,  -  3«2  +  2n3)  is  exactly  zero,  and  the  angular  argument  (Aj  -  3A2  +  2A3) 


332 


EXPLANATORY  SUPPLEMENT 


Table  6.13.1 

The  Principal  Commensurabilities  Among  Satellites 


Argument  Satellites  Libration  Amplitude 


2A' 

-  A- 

ZD 

Enceladus-Dione 

1°5 

; 

lo-Europa 

1° 

r^u-i  ijpci  uaiiyuicuc 

3° 

2A' 

-  A  - 

Enceladus-Dione 

C 

■ 

lo-Europa 

3° 

Euro  pa-Ganymede 

C 

4A' 

-2A- 

-n-n' 

Mimas-Tethys 

97° 

4A' 

-3A  - 

-zj' 

Titan-Hyperion 

36° 

2A" 

-3A' 

+  A 

lo-Europa-Ganymede 

0?07 

2A" 

-3A' 

+  A 

Miranda-Ariel-Umbriel 

C 

Note:  Circulation  motion  is  denoted  by  C.  A  prime  refers  to  the  outer  saleflile  of  a 
pair  or  to  the  middle  satellite  of  a  triplet.  Double-primes  refer  to  the  outer  satellite  of 
triple  commensurabilities. 


has  a  mean  value  of  180°,  and  oscillates  about  this  value  with  amplitude  0?066  and 
period  2070  days. 

6.14   Long-Period  Perturbations  by  Other  Satellites 

The  pericenters  and  nodes  of  satellite  orbits  move  slowly  compared  with  the  orbital 
speed,  and  so  the  relative  motion  of  the  pericenters  or  nodes  of  a  pair  of  satellites  is 
slow,  and  significant  perturbations  can  arise  from  the  arguments  m  —  w'  or  Q  —  fl'. 
In  the  planetary  system  these  are  called  secular  perturbations,  but  they  are  in  fact 
of  very  long  period — 25,000  years  and  longer.  In  the  satellite  systems  the  periods 
are  much  shorter,  and  the  perturbations  are  usually  represented  by  periodic  terms. 
The  magnitude  of  this  effect  depends  on  the  mass  of  the  perturbing  satellite  and 
the  size  of  its  eccentricity  or  inclination.  Hence,  for  example,  in  the  Saturn  system 
only  the  effects  of  Titan  are  significant.  Its  effect  on  the  osculating  eccentricity  e 
and  longitude  of  pericenter  zu  of  Rhea  are  of  the  form 

e  cos  vj  =  e0  cos  tuD  +  er  cos  tzj-t 

(6.14-1) 

e  sin  w  =  ep  sin  vjp  +  ef  sin  wx 

where  tuT  is  the  longitude  of  the  pericenter  of  Titan,  ef  is  a  forced  component 
of  the  eccentricity  caused  by  its  resonance  with  Titan,  and  ep,  zap  are  the  proper 
eccentricity  and  longitude  of  pericenter  of  Rhea,  so  that  rop  and  the  phase  of  zup 
are  arbitrary  constants,  and  the  rate  of  mp  is  due  principally  to  the  oblateness  of 
Saturn. 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  333 

This  effect  is  particularly  noticeable  for  Rhea,  as  the  forced  eccentricity  ef  is 
much  larger  than  the  proper  eccentricity  ep.  In  this  particular  case  Wj  is  the  proper 
longitude  of  pericenter  of  Titan,  and  ef  is  related  to  the  proper  eccentricity  and 
mass  of  Titan. 

In  the  satellite  systems  of  Jupiter  and  Saturn  there  are  several  satellites  of  large 
mass  compared  to  that  of  the  other  satellites,  and  so  they  are  liable  to  cause  sizable 
forced  eccentricities  or  inclinations  on  each  other's  orbits.  These  forced  components 
can  themselves  cause  significant  forced  components  on  other  satellites,  and  the  re- 
sulting terms  can  have  frequencies  quite  different  from  the  natural  frequencies  of 
the  system  due  to  the  oblateness,  etc.  To  compute  these  perturbations  the  eigen- 
value theory  used  for  the  secular  perturbation  theory  of  the  planets  must  be  used 
(see  Brouwer  and  Clemence,  1961). 

6.15   Planetocentric  Rectangular  Coordinates 

The  theory  of  the  motion  of  a  satellite  gives  expressions  for  the  osculating  elements 
as  functions  of  time.  In  many  cases  it  is  more  convenient  to  represent  the  position 
of  a  satellite  in  its  orbit  in  rectangular  coordinates  rather  than  osculating  elements. 
Let  the  osculating  elements  of  the  satellite  be  a,  e,  i,  A,  tu,  and  Q,  Then, 

(1)  calculate  the  mean  anomaly  M  from 

M=  X-m.  (6.15-1) 

(2)  Determine  the  eccentric  anomaly  E  from  Kepler's  equation 

£-esin£  =  M.  (6.15-2) 

(3)  Calculate  the  coordinates  x,  y  in  the  orbital  plane  (where  the  *-axis  is  toward 
the  pericenter)  from 

x  -  a(cos  E  —  e), 

(6.15-3) 

y  =  a(l  -e2)l/2sin£. 

Methods  for  solving  Kepler's  equation  can  be  found  in  standard  celestial 
mechanics  texts. 

(4)  Next  calculate  the  coordinates  x\ ,  y\ ,  z\  relative  to  the  reference  plane  and 
*-axis  direction  used  for  a  particular  satellite.  If,  as  in  Figure  6.11.1,  the 
orbit  is  related  directly  to  the  reference  plane  by  the  orbital  elements,  then 
*i,  yi,  Z]  are  given  by 


=  R3(-fi)R,(-0R3(-w) 


(6.15-4) 


334 


EXPLANATORY  SUPPLEMENT 


Figure  6.15.1 

The  satellite  orbit  referred  to  an  intermediate  plane,  where 
P  is  the  pericenter  of  the  satellite  orbit  and  N  =  nc+AB 


where  w  =  w  -  SI,  and  R,(a)  for  i  =  1,  2,  3  is  a  rotation  through  an 
angle  a  about  the  current  jc-,  _v-,  or  z-axis  respectively  (see  Section  11.41  for 
expressions  for  these  rotation  matrices).  This  particular  transformation  is 
given  explicitly  as 

X]  =  Or  cos  u  -  y  sin  to)  cos  J?  -  (jrsinw  +  ycosw)sini?cos  i, 

y\  =(xcosw  -ysinw)cos  J?  +  (xsinw  +  y  cos  w)  cos  f2  cos  (',  (6.15-5) 
z\  =  (x  sin  u>  +  y  cos  w)  sin  L 


In  a  more  complicated  case,  such  as  Figure  6.15.1,  where  the  orbit  is  referred 
to  an  intermediate  plane  {e.g.,  the  equator  of  the  planet)  which  is  itself  referred  to 
the  reference  plane  and  *-axis  direction.  The  coordinates  Xt,  yi,  zi  are  given  by 


=  R3(-fle)Ri(-ie)R3(-tf+  r?e)R,(-7)R3(-w) 


(6.15-6) 


where  z'e  and  flt  are  the  inclination  and  node  of  the  intermediate  plane,  and  7  and 
N  are  the  inclination  and  node  of  the  orbital  plane,  as  shown  in  Figure  6.15.1. 


g  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  335 


Direction  of 
increasing  declination 
(to  north) 


Figure  6.15.2 

Coordinates  of  the  satellite  relative  to  the  planet:  p  =  position  angle,  s  =  angular  distance. 
£  =  Ao  cos  8,  and  r\  -  AS .  Aa  =  difference  in  right  ascension  (satellite  minus  planet), 
A£  =  difference  in  declination  (satellite  minus  planet),  and  6  =  declination  of  planet. 


~x2' 

" 

=  Rt(-«) 

y\ 

.22  _ 

If  the  coordinates  x\,  yi,  z\  are  referred  to  the  ecliptic  and  equinox  of  B1950, 
then  the  coordinates  Jr2,  yi,  Zi  of  the  satelhte  relative  to  the  center  of  mass  of  the 
planet,  in  the  frame  of  the  Earth's  equator  and  equinox  of  B1950,  are 


(6.15-7) 


where  e  =  23?44578787  is  the  obliquity  of  the  ecliptic  at  B1950. 

If  the  coordinates  must  be  referred  to  the  equator  and  equinox  of  some  epoch 
other  than  B1950  (e.g.,  of  date  or  of  J2000),  then  precession  should  be  applied  to 
x2,  yi,  Z2-  The  precession  matrix  from  B1950  to  J2000  is  given  in  Section  3.591. 

We  now  consider  the  apparent  position  of  the  satellite  as  seen  by  an  observer 
on  the  Earth.  Let  £  =  Aqcos*  and  t]  =  AS  be  the  differential  coordinates  of  the 
satellite  in  right  ascension  and  declination  respectively  (see  Figure  6.15.2).  The 
differences  are  in  the  sense  satellite  minus  center  of  planet.  Then,  to  first  order, 


£  =  Cv'2  cos  a  -  X2  sin  a)  I  r, 

t)  -  (zi  cos  8  —  xi  sin  6  cos  a  —  y2  sin  b  sin  a)  I  r, 


(6.15-8) 


where  a  and  S  are  the  right  ascension  and  declination  of  the  planet;  r  is  the  distance 
of  the  planet  from  the  Earth,  in  the  same  units  as  x2l  yi,  Zi  (usually  AU);  and  £  and 
V  are  in  radians. 


336  EXPLANATORY  SUPPLEMENT 

The  position  angle  p  and  angular  distance  s  of  the  satellite  relative  to  the  planet 
are  given  by 

tmp  =  £  /  rf:, 

9      9  1/9  (6.15-9) 


6. 1 6   The  Apparent  Orbit 

The  apparent  orbit  of  a  satellite  on  the  geocentric  celestial  sphere  is  an  ellipse  that 
is  the  orthogonal  projection,  in  the  direction  of  the  line  of  sight,  of  the  actual  orbit 
in  space.  In  a  circular  orbit,  the  orbital  diameter  that  is  perpendicular  to  the  line  of 
sight  is  projected  into  the  major  axis  of  the  apparent  ellipse.  At  its  extremities,  the 
satellite  is  at  its  greatest  elongations  from  the  primary.  In  planning  observations 
of  satellites  with  short-period  orbits,  times  of  greatest  elongations  are  more  useful 
than  differential  coordinates. 

At  times  of  greatest  elongation  the  satellite  and  planet  center  are  separated  by 
an  apparent  angular  distance  a  I  A,  where  a  is  the  apparent  semi-major  axis  in  arc 
seconds  at  a  distance  of  one  astronomical  unit  and  A  is  the  geocentric  distance  of 
the  primary.  The  orbital  diameter  that  lies  in  the  plane  formed  by  the  line  of  sight 
and  the  normal  to  the  orbital  plane,  projects  into  the  minor  axis.  At  the  further 
extremity  of  this  diameter,  the  satellite  is  in  superior  geocentric  conjunction  with 
the  primary,  and  at  the  nearer  extremity  it  is  at  inferior  conjunction.  The  ratio  of 
the  semi-minor  axis  to  the  semi-major  axis  is  the  absolute  value  of  sinB,  where  B 
is  the  angle  between  the  line  of  sight  and  the  plane  of  the  orbit. 

On  the  planetocentric  celestial  sphere  of  the  primary,  the  path  of  the  satellite  is 
a  great  circle,  and  the  positions  of  the  satellite  on  the  planetocentric  sphere  at  any 
time  are  obtained  from  the  orbital  elements.  To  represent  these  positions,  the  same 
coordinate  systems  are  adopted  as  those  defined  on  the  geocentric  celestial  sphere 
by  the  equator  and  the  ecliptic.  Because  of  the  mathematically  infinite  radius  of  the 
celestial  sphere,  these  reference  circles  are  in  identically  the  same  positions  on  the 
planetocentric  sphere  as  on  the  geocentric  sphere.  The  Earth  on  the  planetocentric 
sphere  is  diametrically  opposite  the  geocentric  position  of  the  planet,  and,  therefore, 
at  right  ascension  a  ±  180°  and  declination  —8,  where  a  and  8  are  the  geocentric 
coordinates  of  the  planet. 

Referred  to  the  celestial  equator,  the  position  of  the  great  circle  that  the  satellite 
describes  on  the  planetocentric  sphere  is  represented  by  its  inclination  (J)  and  the 
right  ascension  (N)  of  its  ascending  node,  or  by  the  right  ascension  (N  —  90°)  and 
declination  (90°  —  J)  of  the  pole  of  the  orbit.  The  major  axis  of  the  apparent  elliptic 
orbit  that  the  satellite  describes  on  the  geocentric  sphere  is  parallel  to  the  plane  of 
this  great  circle. 

In  Figure  6.16.1  the  following  angles  are  indicated: 


N-90 


Orbit  of 
satellite 


Pole  of 
orbit 


North  pole  of 
Earth's  equator 


To  Earth 


J  80*! 


'Equator  of  Earth 


Figure  6.16.1 

Planetocentric  celestial  sphere.  The  Earth  has  right  ascension,  180°  +  a,  and 
declination,  -6.  Tx  =  180"  +  a  and  x'x  =  1 80°  +  a  -  (N  -  90°)  =  a  -  N  -  90° 


Figure  6.16.2 

Spherical  triangle  used  to  compute 
U,  B,  and  P 


Figure  6.16.3 

Spherical  triangle  used  to  compute 
a  and  p  —  P 


338 


EXPLANATORY  SUPPLEMENT 


P:  The  position  angle  of  the  minor  axis  of  the  apparent  orbit,  measured  from 
North.  The  axis  selected  is  the  one  pointing  toward  the  pole  of  the  orbit 
relative  to  which  the  satellite  motion  is  direct. 

B:  the  planetocentric  latitude  of  the  Earth  relative  to  the  orbital  plane  of  the 
satellite;  positive  toward  the  pole  of  the  orbit  for  which  motion  is  direct. 

U:  the  geocentric  longitude  of  the  planet  measured  around  the  orbit  of  the  satel- 
lite, from  the  ascending  node  on  the  Earth's  equator.  Hence  the  planetocentric 
longitude  of  the  Earth,  measured  from  the  same  point,  is  U  —  180°. 


From  spherical  triangle  QRE  shown  in  Figure  6.16.2  we  obtain 


cos  B  sin  t/  =  +  cos  /  cos  <5  sin(o:  —  AO  +  sin  J  sin  6 , 
cos  B  cos  U  =  +  cos  6  cos(q  —  N), 

sin  5  =  +  sin  J  cos  8  sin(a  —  N)  —  cos  J  sin  8,  (6.16-1) 
cos  B  sin  P  =  -  sin  / cos(a  —  AO, 
cos  B  cos  P  =  +  sin  /  sin  S  s'm(a  —  N)  +  cos  J  cos  6, 


The  position  of  the  satellite  is  described  by  « — the  planetocentric  longitude  of 
the  satellite  measured  in  the  same  way  as  U — and  a — the  planetocentric  angular 
displacement  of  the  satellite  from  the  anti-Earth  direction;  a  takes  the  value  0°  to 
180°,  and  has  the  value  180°  when  the  satellite  lies  between  the  planet  and  the 
Earth. 

From  spherical  triangle  ETS  shown  in  Figure  6.16.3  we  obtain 


sin  a  sin(p  —  P)  —  sin(«  —  [/), 
sincrcos(p  —  P)  -  sinficos(«  -  U), 
cos  a  =  cosBcos(«  —  U). 


(6.16-2) 


Let  r  be  the  distance  of  the  satellite  from  the  planet,  A  be  the  distance  of  the  planet 
from  the  Earth,  As  be  the  distance  of  the  satellite  from  the  Earth,  and  s  be  the  the 
geocentric  distance  of  the  satellite  from  the  planet,  r,  A,  and  As  are  measured  in 
units  of  length,  and  s  is  measured  in  units  of  arc. 

Then,  from  the  plane  triangle  formed  by  the  Earth,  the  planet,  and  the  satellite, 


As  sins  -  rsintr, 
As  cos  5  =  r  cos  (7  +  6. 


(6.16-3) 


ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES 


339 


North 


Figure  6.16.4 

Apparent  orbit  of  a  satellite  of  the  primary  P  as  projected  on  the  geocentric  sphere.  This 
figure  shows  the  situation  when  the  Earth  is  north  of  the  orbital  plane  of  the  satellite. 


With  sufficient  accuracy  we  may  write: 

s-  — -  sin  a  =  ^-  sin  a,  (6.16-4) 

zisinl"  A 

where  a  is  the  apparent  radius  of  the  orbit  of  the  satellite  at  unit  distance,  ex- 
pressed in  seconds  of  arc.  Rigorous  formulas  for  p  and  s  in  terms  of  the  differential 
coordinates  of  the  satellite,  and  also  in  terms  of  the  planetocentric  coordinates,  are 
given  later. 

At  greatest  elongation,  u  -  tJ  =  ±  90°,  <r  =  90°,  and  S  =  a  I  A  in  position 
angle  p  =  P  ±  90°.  At  the  extremities  of  the  minor  axis  of  the  apparent  orbit,  the 
satellite  is  at  inferior  or  superior  conjunction;  a  —  U  is  0°  or  180°,  a  =  B,  and  the 
position  angle  is  P  or  P  +  180°.  Evidently,  when  the  Earth  is  north  of  the  orbital 
plane,  the  satellite  is  at  inferior  conjunction  at  the  southern  extremity  of  the  minor 
a^is,  and  is  at  superior  conjunction  at  the  northern  extremity  (see  Figure  6.16.4); 
B  is  then  positive  if  the  motion  is  direct,  negative  if  retrograde.  When  the  Earth 
is  south  of  the  orbital  plane,  superior  conjunction  is  at  the  southern  extremity  of 
the  minor  axis,  and  B  is  negative  in  direct  motion,  positive  in  retrograde  motion. 


340  EXPLANATORY  SUPPLEMENT 

Irrespective,  therefore,  of  whether  the  motion  is  direct  or  retrograde,  the  position 
angle  at  superior  conjunction,  when  B  is  positive,  is  p  -  P;  when  B  is  negative,  it  is 
p  =  P+  180°. 

The  apparent  orbit  becomes  increasingly  elliptical  as  the  Earth  approaches  the 
orbital  plane,  and  reduces  to  a  straight  line  when  the  Earth  is  in  this  plane.  As 
the  Earth  passes  through  the  plane  and  B  changes  sign,  each  superior  and  inferior 
conjunction  occurs  at  the  opposite  extremity  of  the  minor  axis  from  that  at  which  it 
previously  took  place.  Similarly,  when  the  Earth  is  in  the  plane  that  is  perpendicular 
to  the  orbital  plane  and  contains  the  celestial  pole,  the  minor  axis  is  exactly  in  the 
north-south  direction,  and  the  major  axis  is  exactly  east-west.  As  the  Earth  passes 
through  this  plane,  the  extremity  of  the  major  axis  that  formerly  was  the  more 
northerly  becomes  the  more  southerly. 

Only  when  J  is  not  too  greatly  different  from  0°  or  180°  is  the  direction  of 
the  minor  axis  necessarily  nearly  enough  north  and  south  for  the  elongations  to 
be  strictly  and  unambiguously  described  as  eastern  and  western.  When  /  is  in  the 
neighborhood  of  90° ,  as  in  the  case  of  the  satellites  of  Uranus  and  Pluto,  the  direc- 
tion of  the  minor  axis  on  the  celestial  sphere  ranges  from  north-south  to  east-west. 
This  introduces  confusion  in  the  terminology  for  the  elongations,  but  in  general 
they  are  more  appropriately  regarded  as  northern  and  southern  than  as  eastern 
and  western. 

In  the  ephemerides  for  finding  the  apparent  distance  s  and  position  angle  p,  the 
factor  sincr  giving  the  ratio  of  *  to  the  apparent  distance  at  greatest  elongation  is 
denoted  by  F,  and  therefore  the  apparent  distance  of  the  satellite  from  the  primary 
is  given  by 

s-Fet/A.  (6.16-5) 

With  Pq  denoting  an  arbitrary  fixed  integral  number  of  degrees  near  the  value  of  P 
at  opposition,  the  value  of  p  at  any  time  is  expressed  in  the  form  p\  +p2-  Pi  is  the 
sum  of  the  approximate  position  angle  at  elongation  and  the  amount  of  motion  in 
position  angle  since  elongation.  P2,  depending  on  the  date,  denotes  the  correction 
P  —  Pq.  In  calculating  F  and  p\ ,  the  value  of  the  eccentricity  of  the  apparent  orbit  at 
opposition  is  used;  consequently,  in  the  values  of  s  and  p  that  are  derived  from  them, 
the  effect  of  the  variation  of  the  eccentricity  of  the  apparent  orbit  is  neglected. 

6.17   Calculating  Tabulated  Values 

The  apparent  positions  of  the  satellites  are  represented  by  their  positions  relative 
to  the  primary,  expressed  either  by  the  apparent  angular  distance  and  position 
angle,  or  by  the  differential  spherical  (or  rectangular)  coordinates  in  right  ascension 
and  declination.  The  tabular  values  are  corrected  for  light-time,  and  are  directly 
comparable  with  observations  at  the  tabular  times.  It  is  usually  sufficiently  accurate 
to  use  the  light-time  from  the  planet  to  the  Earth.  The  timescale  of  the  theories 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  341 

of  the  satellites  is  TDB.  The  timescale  of  the  ephemerides  in  The  Astronomical 
Almanac  is  UT.  The  value  of  TDB  —  UT  adopted  for  The  Astronomical  Almanac 
from  1990-2000  is  approximated  by 

TDB  -  UT  =  56!059  +  0f2822(y  -  1988. 0)  +  0!02223(y  -  1988. 0)2.  (6.17-1) 

6.171  Times  of  Greatest  Elongation  The  method  for  calculating  the  inclination, 
orbital  longitude,  and  longitude  of  ascending  node  with  respect  to  the  Earth's 
equator,  J^  u,  and  ./V,  can  vary  from  satellite  to  satellite.  The  descriptions  for  these 
calculations  are  contained  in  Sections  6.2  through  6.7.  Given  that  J,  u,  and  N  have 
been  computed  for  0h  on  a  given  date,  and  that  the  right  ascension  and  declination  of 
the  primary,  a  and  6,  are  known,  U,  B,  and  P  are  calculated  from  Equations  6.16-1. 

The  angle  to  the  nearest  elongation  is  given  by 

du  =  90°  —  (w  —  U).  (6.171-1) 

The  time  for  the  satellite  to  transit  this  angle  is 

dt^duln.  (6.171-2) 

If  dt  is  greater  than  one  day,  J,  u  and  N,  and  then  f/,  B,  and  P  are  redetermined  for 
0h  on  the  next  day.  A  new  dt  is  then  computed.  The  light-time  correction  01?  1 386 1  Zl 
is  then  applied  to  give  the  time  of  elongation.  A  is  the  Earth-planet  distance. 

6.172  Apparent  Distance  and  Position  Angle  Given  J,  u,  and  N  on  the  date 
of  opposition,  P  is  determined  from  Equations  6.16-1.  P0  is  the  integral  part  of 
P.  Now  from  /,  u,  and  N  at  0h  on  any  date,  U,  B  and  P  are  computed  from  Equa- 
tions 6.16-1.  p  -  P  and  sine  =  F  are  found  from  Equations  6.16—2.  p]  is  the  sum 
of  p  -  P  and  PQ.  p2  is  the  difference  P  -  P0,  where  P  is  the  value  for  0h  on  the  date 
in  question,  not  the  value  at  opposition.  The  determination  of  a  j  A  is  a  straight- 
forward computation  from  the  semi-major  axis,  a,  and  the  Earth-planet  distance, 
A. 


6-173  Differential  Coordinates  To  first  order,  the  differential  right  ascension  and 
declination  in  the  satellite  minus  planet  are 

Aa  =  s  sin  p  sect  (3  +  A3), 

(6.173-1) 

A(3  =  j  cos/?, 


where  s  is  calculated  from  Equation  6.16-4  and  p  =  p\  +pi- 


342 


EXPLANATORY  SUPPLEMENT 


6.18  Notation 

Many  different  notations  have  been  used  in  the  literature  for  the  orbital  elements 
of  the  satellites.  The  notations  for  the  angular  elements  used  in  the  balance  of  this 
chapter  are  described  below. 

For  those  satellites  for  which  the  orbit  is  referred  directly  to  the  ecliptic  and 
equinox  of  B1950.0  or  J2000.0  the  notation  is 

A  =  mean  longitude, 

w  =  longitude  of  the  pericenter, 

Q  -  longitude  of  the  ascending  node, 

/  =  inclination. 

Where  an  intermediate  reference  plane  is  used  (usually  the  equatorial  plane  of 
the  planet  or  the  Laplacian  plane)  the  notation  used  for  the  angular  elements  is 

L  -  mean  longitude, 

P  -  longitude  of  the  pericenter, 

6  -  longitude  of  the  ascending  node, 

7  =  inclination. 

When  the  orbital  elements  are  referred  to  the  Earth  equator  and  equinox  of 
B1950.0  or  J2000.0,  the  notation  used  for  the  angular  elements  is 

/  =  mean  longitude, 

7r  =  longitude  of  the  pericenter, 

N  =  longitude  of  the  ascending  node, 

J  =  inclination. 

The  reason  for  using  the  ecliptic  as  the  reference  plane  for  the  orbits  is  for 
convenience  rather  than  any  good  dynamical  or  observational  reason.  The  planes  of 
dynamical  significance  are  the  equatorial  and  orbital  planes  of  the  planet.  The  plane 
of  observational  significance  is  the  Earth's  equatorial  plane.  The  orbital  elements  of 
the  planets  are,  however,  referred  to  the  ecliptic,  and  so  it  was  probably  a  convenient 
frame  in  which  to  calculate  solar  and  planetary  perturbations. 


6.2   THE  SATELLITES  OF  MARS 

Ephemerides  of  the  greatest  eastern  elongations,  and  tables  for  determining  the 
approximate  apparent  distance  and  position  angle  are  given  for  the  satellites  of 
Mars  in  The  Astronomical  Almanac.  The  ephemerides  of  the  satellites  are  computed 
from  elements  given  by  Sinclair  (1989). 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES 

Phobos 


343 


a  =  6. 26974  x  10-5  au 
n  =  1128?844556/day 
e  =  0.0150 
7=  1?10 

0  =  327?9O-O?43533rf 

L  =  232?41  +  nd  +  0?00124y2 

/>  =  278?96  +  0?43526d 

Na  =  47?39  -  0°0014y 

Ja  =  37?27  +  0?0008y 


Deimos 


wh<? 


a  =  1.56828  x  10^4au 
n  =  285?  161 888  /day 
e  =  0.0004 
7  =  1°79 

£>  =  240?38-0?01801d 
L-28?96  +  nd-0.27sinA 
P=  lll?7+0?01798cf 
h=  196?55  -  Of  01 801 
Na  =46?37  -0.0014 y 
Ja  =36?62  +  0?0008y 

d  =  JD-  2441266.5, 


These  elements  are  referred  to  the  fixed  Laplacian  planes  of  the  satellites.  The 
angular  elements  are  shown  in  Figure  6.2.1.  The  orbital  elements  are  defined  as 
follows;  the  semi-major  axis  a;  the  mean  daily  motion  n;  the  eccentricity  e\  the 
inclination  7;  the  longitude  of  the  ascending  node,  9,  measured  from  the  ascending 
node  of  the  Laplacian  plane  on  the  Earth's  equator  along  the  Laplacian  plane  to 
the  node  of  the  orbit;  L,  the  mean  longitude  reckoned  from  the  vernal  equinox  along 
the  Earth's  equator  to  the  ascending  node  of  the  Laplacian  plane,  then  along  the 
Laplacian  plane  to  the  ascending  node  of  the  orbit,  and  then  along  the  orbit  to 
the  mean  position  of  the  satellite;  P,  the  longitude  of  the  pericenter,  measured  in 


344 


EXPLANATORY  SUPPLEMENT 


Figure  6.2.1 

Reference  system  for  Phobos  and  Deimos.  D  =  position  of  satellite  pericenter,  6  =  AB, 
L  =  TA+AB  +  BC+CD  +  mean  anomaly,  P=TA+AB  +  BC +  CD,  Na  =  TE,  and 
N-TF. 


the  same  mariner  as  L  from  the  vernal  equinox  to  the  pericenter;  Na,  the  longitude 
of  the  ascending  node  of  the  Laplacian  plane  reckoned  from  the  vernal  equinox 
along  the  Earth's  equator;  Ja,  the  inclination  of  the  Laplacian  plane  to  the  Earth's 
equator;  h,  is  reckoned  along  the  Laplacian  plane  from  its  ascending  node  on  the 
orbital  plane  of  Mars  to  the  ascending  node  of  the  satellite  orbit. 

Though  the  theories  for  the  motion  of  the  satellites  contain  several  periodic 
terms,  the  only  periodic  perturbation  of  importance  for  Earth-based  observations 
is  L  =  —  0. 27  sin  h  for  Deimos. 

J  and  A/,  the  inclination  and  ascending  node  of  the  satellite  orbit  on  the  Earth's 
equator  can  be  found  by  considering  the  spherical  triangle  EFC  in  Figure  6.2,1.  From 
spherical  trigonometry  we  have 

sin  J  s'm(N  —  Na)  -  sin  7  sin  9, 

(6.2-1) 

sin  J  cos(N  —  Na)  =  cos  7  sin  Ja  +  sin  7  cos  Ja  cos  6. 
Now  find  the  arc  length  FC  of  triangle  EFC  from 
sin  J  sin  FC  =  sin/,  sin  6, 

(6.2-2) 

sin/ cos  FC  =  cosJa  sin  7  +  sin/a  cos  7  cos  8. 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  345 

u  follows  from 

u  =  FC  +  L-Na-0  +  (f -M),  (6.2-3) 
where  (/—AO  is  the  equation  of  center  that  is  computed  via  Equation  6.11-1,  where 

M  =  L-P.  (6.2-4) 
The  computation  of  the  tabulated  values  follows  as  described  in  Section  6.17. 

6.3   THE  SATELLITES  OF  JUPITER 
6.31    The  Galilean  Satellites 

The  ephemerides  and  phenomena  of  Satellites  I-IV  given  in  The  Astronomical  Al- 
manac are  based  on  the  theory  of  Lieske  (1978),  with  constants  due  to  Arlot  (1982). 
Lieske's  theory  is  a  revision  of  the  theory  by  Sampson  (1921).  A  shortened  version 
of  Lieske's  theory  is  presented  below,  which  will  give  the  positions  of  the  satellites 
to  about  500km.  The  constants  used  below  are  from  Lieske  (1987): 

107f,  =  -41279cos(2L,  -  2L2); 

107v,  =  -5596  sin(/>3  -P4)-  2198sin(/>,  +P2-  in,  -  2G) 
+  1321  sinOfr)  -  1157sin(L,  -ILa  +  Pt) 

-  1940sin(L,  -  2L2  +  P3)  -  791  sin(I,  -  2L2+P2) 
+  791  sin(L,  -  2L2  +  P2)  +  82363  sin(2L,  -  2L2); 

107Ci  = +7038  sin(ii  -  0,  +  v,)  +  1835  sin(L,  -<92  +  v,); 
1076  =  -3187008(1^  -  Pi)  -  1738cos(L2  -  Pi) 

+  93748  cosa,  -L2); 
107v2  =  -1158sin(-2/7j+2<?)  +  1715sin(-2/7j  +  03+#  -2G) 

-  1846  sin(G)  +  2397  sin(/>3  -P4)  -  3172  sin(<fr) 

-  1993  sin(L2  -  Z,3)  +  1844sin(L2  -  P2) 
+  6394sin(L2  -  P3)  +  3451  sin(L2  -  P4) 

+  4159sin(L,  -  2L2  +  P4)  +  7571  sin(Li  -2L2+P3) 

-  1491  sin(L,  -  2L2+P2)  -  185640  sin(Z,[  -  L2) 

-  803  sin(Z.,  -  Ly)  +  915  sin(2Z.j  -  2L2); 

107C2  =  +81575  sin(L2  -  02  +  v2)  +  4512sin(L2  -  03  +  v2) 

-  3286sin(L2  -  #  +  v2)\ 

1076  =  -14691  cos(£,3  -  Pi)  -  1758cos(2L3  -  2L4) 


346  EXPLANATORY  SUPPLEMENT 

+  6333cos(Z.2  ^£3); 
107v3  =  ~1488sin(2i7j+2tf)  +  411sin(-53  +  !?) 
+  346  sin(-04  +  <P)  -  2338  sin(G) 
+  6558  sin(P3  -  Pa)  +  523  sin(Pi  +  P3  -  2/7,  -  2G) 
+  314  sin(0,)  -  943  sin(L3  -  L4) 
+  29387  sin(Z3  -  P3)  +  15800  sin(L3  -  P4) 
+  3218  sin(2L3  -  2L4)  +  226  sin(3L3  -  2L4) 

-  12038  sin(L2  -  L3)  -  662  sin(Z4  -  2L2  +  P4) 

-  1246  sin(L,  -  2L2  +  P3)  +  699  sin(L,  -  2L2  +  P2) 
+  217sin(Li  -  73); 

107C3  =  -2793  sin(L3  -  92  +  y3)  +  32387  sin(L3  -  63  +  v3) 
+  6871  sin(L3  -  94  +  v3)  -  16876  sin(L3  -  $  +  v3); 

107£4  =  +1656cos(L4  -  P3)  -  73328 cos(L4  -  P4) 

+  182cos(L4  -  ilj)  -  541  cos(74  +  P4  -  2/7,  -  2G) 

-  269cos(2L4  -  2F4)  +  974cos(L3  -  L4); 
107v4  =  -407  sin(-2/,4  +  2«7)  +  309  sin(-2/>4  +  84  +  &) 

-  4840  sin(-2/Jj  +  21?)  +  2074  sin(-04  + 

-  5605  sin(G)  -  204  sin(2G) 

-  495  sin(5G'  -  2G  +  <f>2)  +  234  sin(P4  -  /7,) 

-  6112  sin(P3  -  P4)  -  3318  sin(L4  -  ^3) 

+  145573  sin(74  -  P4)  +  178  sin(74  -  77,  -  G) 

-  363  sin(L4  -  /Jj)  +  1085  sin(74  +  P4  -  211  s  -  2G) 
+  672  sin(2L4  -  2P4)  +  218  sin(2L4  -  2/7,  -  2G) 

+  167  sin(2L»  -  64  -  V)  -  142sin(2L4  -  2<P) 
+  148  sin(L3  -  2L4  +  P4)  -  390  sin(L3  -  L4) 

-  195  sin(273  -  2L4)  +  185  sin(373  -  7L4  +  4^4); 
107<4  =  +773  sin(L4  -  277,  +  9  -  2G  +  v4) 

-  5075  sin(74  -  93  +  v4)  +  44300  sin(L4  -  94  +  v4) 

-  76493  sin(L4       +  v4);  (6.31-1) 

where 


u  = 

L2  = 
L3  = 


106?078590000  +  203?4889553630643 1, 
175?733787000+  101?3747245566245 1, 
120?561385500  +  50°31760915340462f, 


g  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  347 

L4  =  84?455823000  +  2 1?57 1070875 17961  r, 

<j>,  =  184?415351000  +  0?17356902r, 

Pi  =82°380231000  +  0°  16102275/, 

P2  =  128?960393000  +  0?04645644f, 

P-i  -  187?550171000  +  0?00712408?, 

P4  =  335?30925400O  +  O°00183939r, 

77,  =  13?470395000, 

01  =  308P365749000  -  0?  13280610?, 

02  =  100?438938000  -  Of 03261535 1, 
63  =  1 18?90892800O  -  0?00717678r, 
94  =  322?746564000  -  0?00176018r, 
&  =  316?500101000  -  0?00000248r, 

G'  = 31?9785280244  +  0?033459733896f, 
G  =  30?2380210168  +  0?08309256178969453  f, 
4>2  =52?  1445966929, 
f  =  JD  -  2443000. 5.  (6.31-2) 

Li,  Pj,  and  0,-  are  the  mean  longitude,  proper  periapse,  and  proper  node  of 
satellite  i.  <pi  is  the  libration  phase  angle;  77j  is  the  longitude  of  perihelion  of  Jupiter; 
*P  is  the  longitude  of  the  origin  of  the  coordinates  (Jupiter's  pole);  G'  and  G  are  the 
mean  anomalies  of  Saturn  and  Jupiter;  4>2  is  the  phase  angle  in  solar  (A  I  7?)3  with 
angle  5G'  -  2G. 

To  convert  £,  v,  and  £  to  rectangular  coordinates  1,  y,  and  z  in  the  moving  Jovian 
equatorial  frame,  Equations  6.31-3  and  6.31-4  can  be  used.  Satellite  subscripts  have 
been  omitted  for  clarity. 

x  =  a{\  +Ocos(L-i?  +  v), 

y  =  a{\+Osm(L-$  -v),  (6.31-3) 
z  =  a(. 

The  coefficients  a  are 


ai  =  0.00281 9347  au 
a2  =  0. 004485872  AU 
a3  = 0.0071 55352  AU 
a4  =  0.012585436  au. 


348  EXPLANATORY  SUPPLEMENT 

The  formula  for  finding  the  coordinates  in  the  Earth  equatorial  frame  of  1950.0  is 


r  =  Ri(-e)R3(-J2)R,(-i)R|(-*)R3(-/)f,  (6.3M) 

where 

f  =  (x,y,z)T 
r  =  (x,y,  z)T 
e  =  23°26,44"84 
n  =  99? 99754 
J  =  1?30691 
$  =  $  -Q 
1=  3°  10401. 

e  is  the  obliquity  of  the  ecliptic;  tt  is  the  longitude  of  the  ascending  node  of  Jupiter; 
/  is  the  inclination  of  Jupiter's  orbit  to  the  ecliptic;  /  is  the  inclination  of  Jupiter's 
orbit  to  the  Earth's  equator.  The  rotation  matrices  R/  are  defined  in  Section  6.15. 

The  data  tabulated  in  The  Astronomical  Almanac  consist  of:  the  approximate 
times  of  superior  geocentric  conjunction;  the  times  of  the  geocentric  phenomena; 
and  the  approximate  configurations,  in  graphical  form,  of  the  satellites  relative  to 
the  disk  of  Jupiter. 

The  Universal  Time  of  each  superior  geocentric  conjunction  is  given  for  each 
satellite  to  the  nearest  minute.  The  phenomena  for  which  times  are  given  are 
eclipses,  occupations,  transits,  and  shadow  transits.  The  UT  of  the  beginning  and 
end  of  each  phenomenon  (disappearance  and  reappearance  for  eclipses  and  occulta- 
tions,  ingress  and  egress  for  transits  and  shadow  transits)  are  given  to  the  nearest 
minute  for  all  phenomena  that  are  observable.  When  Jupiter  is  in  opposition,  the 
shadow  may  be  hidden  by  the  disk  and  no  eclipses  can  be  observed.  In  general, 
eclipses  may  be  observed  on  the  western  side  of  Jupiter  before  opposition  and  on 
the  eastern  side  after  opposition.  Before  opposition  the  disappearance  only  of  Satel- 
lite I  into  the  shadow  may  be  observed  since  it  is  occulted  before  it  emerges  from 
the  shadow;  after  opposition  only  the  reappearances  from  the  shadow  are  visible. 
The  same  is  true  in  general  of  Satellite  II,  although  occasionally  both  phenomena 
can  be  seen.  In  the  case  of  Satellites  III  and  IV,  both  phases  of  the  eclipses  are 
usually  visible  except  near  certain  oppositions.  Similarly  the  occultation  disappear- 
ances and  reappearances  of  a  satellite  cannot  be  observed  if,  at  the  time  concerned, 
the  satellite  is  eclipsed.  For  Satellites  I  and  II  there  are,  in  general,  cycles  of  six 
phenomena  consisting  of  both  phases  of  both  transit  and  shadow  transit,  one  phase 
of  the  eclipse,  and  the  other  phase  of  the  occultation. 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  349 

For  Satellite  IV,  none  of  the  phenomena  occur  when  the  plane  of  the  orbit  of 
the  satellite — essentially  the  same  as  that  of  Jupiter's  equator — is  inclined  at  more 
than  about  2°  to  the  line  from  Jupiter  to  the  Earth  (for  occupations  and  transits) 
or  to  the  Sun  (for  eclipses  and  shadow  transits). 

Owing  to  the  finite  disks  of  the  satellites,  the  phenomena  do  not  take  place 
instantaneously — the  times  refer  to  the  center  of  the  disk.  In  certain  favorable 
situations  of  the  orbital  planes  of  the  satellites  relative  to  the  Earth,  one  satellite 
may  he  eclipsed  by  the  shadow  of  another,  or  may  occult  another.  No  predictions 
of  these  phenomena  are  given  in  The  Astronomical  Almanac,  but  predictions  are 
given  in  Handbook  B.A.A.  at  the  relevant  times.  A  description  of  the  method  of 
prediction  is  given  by  Levin  (1934). 

The  configurations  of  the  four  satellites  relative  to  the  disk  of  Jupiter  are  shown 
jn  The  Astronomical  Almanac  in  graphical  form,  on  the  pages  facing  the  tabular 
ephemerides  of  the  times  of  the  eclipses  and  other  phemomena. 


6.32   The  Fifth  Satellite,  Amalthea 

The  data  given  in  The  Astronomical  Almanac  consist  of  the  Universal  Times  of 
every  20th  eastern  elongation.  The  elongations  are  computed  from  the  following 
circular  orbital  elements,  referred  to  equator  of  Jupiter,  given  by  van  Woerkom 
(1950): 

tQ  =  1903  September  1.5  UT  =  JD  2416359.0; 
a  =  249"55; 
7  =  24*.  1; 

6>  =  82?5-914?62/; 
«  =  722?63175/day; 
Lo  =  194?98; 

6Lo=  -0°113  -  0°0076f +  0?00035f2; 

r  =  (JD-f0)/365.25,  (6.32-1) 

o  is  the  mean  elongation  at  unit  distance;  7,  the  inclination  to  the  equator  of 
Jupiter;  8,  the  longitude  of  the  ascending  node;  n,  the  mean  motion  per  solar  day; 
Lo,  the  mean  longitude  at  epoch  to;  and  SLo,  the  correction  to  mean  longitude. 
'  ~  ?o  is  reckoned  in  Julian  years.  The  longitudes  are  measured  in  the  plane  of  the 
equator  of  Jupiter,  from  the  ascending  node  of  the  mean  orbital  plane  of  Jupiter  on 
the  plane  of  the  equator  of  Jupiter  as  shown  in  Figure  6.32.1.  From  these  orbital 
elements: 

sidereal  period    0d49991083  =  1 1^997860, 
mean  synodic  period    0^49996851  =  1 l']999244. 


350 


EXPLANATORY  SUPPLEMENT 


Figure  6.32.1 

Reference  system  for  Amalthea  and  Thebe.  A  =  180°  —  AB,  9  =  180°  +  AC, 
9  -  A  =  AC,  0  =  DC,  N  =  TO.  and  a0  =  TA-  90° 


In  determining  these  elements,  van  Woerkom  adopted  Souillart's  elements  of  the 
equator  of  Jupiter,  but  for  the  calculation  of  the  elongations  in  The  Astronomical 
Almanac  the  right  ascension  and  declination  of  Jupiter's  pole  of  Davies,  et  ai  (1989) 
are  used: 

a0  =  268?05  -  0?009  T 

(6.32-2) 

<50  =  64?49  +  0.003r, 

where      and  6q  are  referred  to  the  equator  and  equinox  of  J2000.0 

r*(JD-  2451545. 0)  /  36525. 

The  right  ascension,  N,  of  the  node  of  the  orbit  on  the  Earth's  equator;  the 
inclination,  J,  of  the  orbit  to  the  Earth's  equator;  and  the  arc,  ip,  along  the  orbit 
from  the  node  on  the  Earth's  equator  to  the  node  on  Jupiter's  equator  are  given  by 

sin  J  sin(N  —  ao)  -  +  cos  8q  cos  7  +  sin  60  sin  7  cos(0  —  A), 
sin  J cos(A/  -  c*o)  =  -  sin  7  sin((?  -  A), 

cos  J  -  +  sin  60  cos  7  -  cos  60  sin  7  cos(0  -  A), 
sin  J  sin  rp  =  +  cos6osin(0  —  A), 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES 

sin  J  cos  ip  =  +  sin  S0  sin  7  +  cos  60  cos  7  cos(0  - 


A), 


351 

(6.32-3) 


in  which  6  — A  — the  arc  along  Jupiter's  equator  from  its  node  on  the  Earth's  equator 
to  the  node  of  the  satellite's  orbit — is  given  by 

6-A  =  219?8  -  2:54057487(/  -  f0) 

(6.32-4) 

=  219°8-2?50405737</, 

where  d  is  the  number  of  days  from  the  epoch  (JD  2416359.0). 

The  quantities  /V,  J,  and  tp  are  calculated  from  the  preceding  equations  at 
(V  at  any  date,  and  are  then  used  to  form  U  (B  and  P  are  not  required)  from 
Equations  6.16-1.  The  orbital  longitude,  u,  measured  from  the  node  on  the  Eart  h's 
equator,  at  0h  on  that  date  is  derived  from 

u  =  Lo  +  nd  —  8  +  4>  +  SLq, 

(6.32-5) 

=  V>  +  112?35  + 2X1003567  d. 

Then  the  times  of  the  elongations  on  that  date  are 

eastern  elongation    0!!033327(C/  + 90°  -  u)  +  01?  138614 
western  elongation    0')033327(  U+  270°  -»)  +  (» 138614 

in  which  A  is  the  geocentric  distance  of  Jupiter.  The  terms  in  A  are  the  correc- 
tions for  light-time;  for  strict  accuracy  they  should  be  interpolated  to  the  times  of 
geometric  elongation  which  the  first  terms  represent. 

The  calculation  of  elongation  time  need  be  made  for  only  a  few  of  the  ephemeris 
dates,  the  others  being  obtained  by  means  of  multiples  of  the  period.  For  strict 
accuracy,  the  calculation  should  be  repeated  with  the  values  of  the  quantities  at 
the  calculated  times  instead  of  at  0";  but  for  the  tabular  accuracy  of  0?1,  this  is 
unnecessary. 

6.33  The  Fourteenth  Satellite,  Thebe 

The  times  of  every  10th  eastern  elongation  for  Thebe  are  presented  in  The  As- 
tronomical Almanac.  The  orbital  elements  are  taken  from  Synnott  (1984)  and  are 
referred  to  Jupiter's  equator  and  autumnal  equinox  of  1950.0.  For  the  calculation  of 
the  ephemerides,  the  inclination  of  the  satellite  orbit  to  Jupiter's  equator  is  ignored. 
The  elements  at  epoch  are 


f0  =  JD2443937.  817065, 
a  =  305"95, 


352 


EXPLANATORY  SUPPLEMENT 


e  =  0.015, 
n  =  533?7  /  day, 
7  =  Of  8, 
Lo  =  354?3, 

F0  -344?0,  (6,33-1  j 

where  a  is  the  semi-major  axis  at  unit  distance;  e  is  the  eccentricity;  n  is  the  mean 
daily  motion;  7  is  the  inclination  with  respect  to  Jupiter's  equator;  £0  is  the  mean 
longitude  reckoned  from  the  Jupiter's  autumnal  equinox;  and  Pq  is  the  longitude 
of  perijove  reckoned  along  the  Earth's  equator  to  Jupiter's  autumnal  equinox  and 
then  along  Jupiter's  equator  to  the  perijove  (see  Figure  6.32,1). 

The  times  of  elongation  for  Thebe  are  calculated  in  the  same  manner  as  those 
for  Amalthea.  In  this  case  the  orbital  longitude  («),  is  derived  from 

u  =  Lq  +  nd  -  9  +  4>  +  if  -  M),  (6.33-2) 

where  (/  —  M)  is  the  equation  of  center  that  is  computed  from  Equation  6.11-1, 
where 

M  =  Lq  +  nd  -  P0.  (6.33-3) 


6.34   The  Sixth  through  Thirteenth  Satellites 

Differential  right  ascensions  and  declinations  of  Satellites  VI-XIII  are  presented 
in  The  Astronomical  Almanac.  The  coordinates  are  referred  to  the  equator  and 
equinox  of  J2000.0.  They  are  computed  with  a  variable-order,  variable-step-size 
numerical  integrator  developed  by  Shampine  and  Gordon  (1975).  The  equations  of 
motion  in  x,  y  and  z  are: 


dh 

.  3/2rf 

I  H 

de- 

T 

fy 

2,2 

Js 

dt1 

"i 

d2z_ 

"  3J2rj 
1  2fi 

JS 

dt2  ~ 

-(3^2-  1) 
-(3/i2  -  1) 
(5/J2  -  3) 


1=1 

6 


X  Xj 


r=1 
6 


yt-y  yt_ 


4 


r3- 


(6.34-1) 


where  Mj  is  the  mass  of  Jupiter;  the  A/,  's  are  the  masses  of  the  perturbing  bodies;  rj  is 
the  radius  of  Jupiter;  r-js  is  Jupiter-satellite  distance;  Jt>,  y,,  and  Zi  are  the  rectangular 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  353 

c0niponents  of  the  satellite-perturbing  body  distance;  is  the  satellite-perturbing 
body  distance;  rjj  is  the  Jupiter-perturbing  body  distance.  Planetary  coordinates 
$xe  taken  from  the  DE200.  The  reciprocal  masses,  in  solar  mass  units,  and  the  Ji 
for  Jupiter  used  in  integrations  are  as  follows: 


Sun  1.0  Mercury  6023600.0 

Venus  408523.5  Earth  332946.038 

Mars  3098710.0  Jupiter  1047.35 

Saturn  3498.0  Uranus  22960.0 

Neptune  19314.0  Pluto  130000000.0 

J2  of  Jupiter  0.01475 


The  starting  planetocentric  coordinates  and  velocities  from  Rohde  (1990)  are: 


Epoch  JD  2447890.5  =  1989  December  30 


VI  Himalia  x 

y 

z 

VII  Elara  x 

y 
z 

VIII  Pasiphae  x 

y 

z 

IX  Sinope  x 

y 

z 

X  Lysithea  x 

y 

z 

XI  Carme  x 

y 

z 

XII  Ananke  x 

y 

z 

XIII  Leda  x 

y 


r  (au) 

-0.0394627736618 
-0.0722678670569 
-0.0170810682702 

-0.0619697457552 
-0.0044124460879 
+0.0265446659756 

-0.0474722144088 
-0.1000885430216 
-0.0009486933348 

-0.0579232252532 
+0.1464131750776 
+0.0885266909368 

+0.0683709404212 
-0.0114622412925 
-0.0304090473403 

-0.1221787634075 
-0.1048136497855 
-0.0685824702747 

+0.1246479748900 
-0.0256709692336 
-0.0203855454615 

+0.0356054434403 
-0.0810815597479 
+0.0052592795262 


v  (Au/day) 

+0.0013683275790 
-0.0002593437765 
-0.0010464833518 

+0.0004392130964 
-0.0020946808809 
-0.0003974001515 

-0.0010182557362 
+0.0011925451174 
+0.0009171895371 

+0.0011014867506 
+0.0002877970106 
-0.0003615702389 

+0.0006111658968 
+0.0012863404782 
+0.001 3466750538 

-0,0007075200606 
+0.0009285971336 
+0.0001468741809 

-0.0006562509816 
-0.0013514562258 
+0.0002939680931 

+0.0013645601641 
+0.0006286869081 
+0.0005799993600 


The  differential  coordinates  are  computed  from  Equations  6.15-8. 


354  EXPLANATORY  SUPPLEMENT 

6.4   THE  RINGS  AND  SATELLITES  OF  SATURN 


6.41    The  Rings  of  Saturn 

The  rings  of  Saturn  lie  in  its  equatorial  plane.  The  inclination  and  ascending  node 
of  this  plane  on  the  Earth's  equator  are  determined  from  the  north  pole  of  Saturn 
as  denned  by  Davies  et  al.  (1989).  The  dimensions  of  the  outer  ring  and  the  factors 
for  calculating  the  relative  dimensions  of  the  rings  are  from  Esposito  et  al.  (1984). 
The  outer,  inner,  and  dusky  rings  correspond  to  the  A,  B,  and  C  rings,  respectively. 
The  Cassini  division  lies  between  the  inner  and  outer  rings. 

The  ephemeris  of  the  rings  contains  the  following  quantities  that  determine  the 
Saturnicentric  positions  of  the  Earth  and  Sun  referred  to  the  plane  of  the  rings, 
upon  which  the  appearance  of  the  rings  depends: 

U  =  the  geocentric  longitude  of  Saturn,  measured  in  the  plane  of  the  rings 
eastward  from  its  ascending  node  on  the  mean  equator  of  the  Earth; 
the  Saturnicentric  longitude  of  the  Earth,  measured  in  the  same  way,  is 
U+  180°. 

B  -  the  Saturnicentric  latitude  of  the  Earth  referred  to  the  plane  of  the  rings, 
positive  toward  the  north;  when  B  is  positive,  the  visible  surface  of  the 
rings  is  the  northern  surface. 
P  =  the  geocentric  position  angle  of  the  northern  semi-minor  axis  of  the 
apparent  ellipse  of  the  rings,  measured  from  the  north  toward  the  east. 

U'  =  the  heliocentric  longitude  of  Saturn,  measured  in  the  plane  of  the  rings 
eastward  from  its  ascending  node  on  the  ecliptic;  the  Saturnicentric  lon- 
gitude of  the  Sun,  measured  in  the  same  way,  is  U'  +  180°. 

B'  =  the  Saturnicentric  latitude  of  the  Sun  referred  to  the  plane  of  the  rings, 
positive  toward  the  north;  when  B'  is  positive,  the  northern  surface  of 
the  rings  is  the  illuminated  surface. 

P'  =  the  heliocentric  position  angle  of  the  northern  semi-minor  axis  of  the 
rings  on  the  heliocentric  celestial  sphere,  measured  eastward  from  the 
circle  of  latitude  through  Saturn. 

The  right  ascension  and  declination  of  the  north  pole  of  Saturn  are  according 
to  Davies  et  al.  (1989), 

a,  =  40?58  -  Of 036  T, 

(6.41-D 

<5j  =  83?54-0?OO4  7\ 

where  a}  and  6j  are  referred  to  the  equator  and  equinox  of  J2000.0  (T  =  (JD  - 
245 1545.0)/ 36525). 

Adding  the  variations  due  to  precession,  calculated  by  the  formulas  in  Sec- 
tion 3.21,  gives  the  elements  referred  to  the  ecliptic  and  mean  equinox  of  date;  from 


g  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  355 

them,  the  inclination,  J,  to  the  mean  equator  of  date  and  the  right  ascension,  A/,  of 
the  ascending  node  measured  from  the  mean  equinox  of  date  are  obtained  from 

J  =  90°  -  S0 

(6.41-2) 

N  =  a0  +  90? 

The  arc  <j>  from  the  ascending  node  of  the  ring  plane  on  the  Earth's  equator  along 
the  ring  plane  to  its  ascending  node  on  the  ecliptic  is  obtained  from 

sin N cot  <j>  -  cos N cose  -  sin  scot/,  (6.41-3) 

where  e  is  the  mean  obliquity  of  date.  From  the  elements  referred  to  the  equator  of 
the  Earth,  and  from  the  geocentric  equatorial  coordinates  of  Saturn,  the  ephemeris 
of  V,  B,  and  P  is  calculated  by  Equations  6.16-1.  These  quantities  are  defined  with 
reference  to  the  ring  plane  in  the  same  way  as  with  reference  to  the  orbital  plane 
of  a  satellite;  but  the  effect  of  nutation  must  first  be  removed  from  the  apparent 
right  ascension  and  declination  of  Saturn,  to  refer  the  position  of  the  planet  to  the 
same  equinox  as  the  elements  of  the  reference  plane. 

U' ,  B',  and  P'  may  be  obtained  by  formulas  exactly  analogous  to  Equations  6.16-1 
from  the  ecliptic  elements  of  the  plane  of  the  rings  and  the  heliocentric  longitude, 
/,  and  latitude,  b,  of  Saturn,  referred  to  the  mean  equinox  of  date: 


cos  B'  sin  P' 

-  -  sin  i  cos(/  -  Q), 

cos  B'  cos  P' 

-  +  cos  /  cos  b  +  sin  /'  sin  b  sin(/  — 

Q% 

sinZJ' 

=  —  cos  i  sin  b  +  sin  /'  cos  b  sin(/  - 

f2), 

cos  B'  sin  U' 

=  +  sin  i  sin  b  +  cos  /'  cos  b  sin(/  - 

m, 

cosB'  cos  U' 

=  +  cos  b  cos(/  -  Q). 

(6.41-*) 


The  rings  become  invisible  when 

(a)  The  ring-plane  passes  through  the  Sun,  since  neither  side  of  the  rings  is 
then  illuminated. 

(b)  The  ring-plane  passes  between  the  Sun  and  the  Earth,  since  the  unillumi- 
nated  side  of  the  rings  is  facing  the  Earth. 

(c)  The  ring-plane  passes  through  the  Earth,  since  the  rings  are  too  thin  to  be 
visible  edge  on. 

Twice  during  each  revolution  of  Saturn  around  the  Sun — near  the  times  when 
the  ring-plane  passes  through  the  Sun — the  Earth  usually  crosses  the  ring-plane 
three  times,  though  occasionally  it  crosses  only  once.  On  1995  May  22,  the  Earth 


356  EXPLANATORY  SUPPLEMENT 

again  crosses  the  ring-plane.  The  rings  will  remain  continuously  invisible  until  1995 
August  11  while  the  Earth  is  on  the  unilluminated  side.  The  Earth  crosses  the 
ring-plane  for  a  third  time  on  1996  February  11.  The  last  occasion  on  which  only 
one  passage  of  the  Earth  through  the  ring-plane  occurred  was  in  1950. 


6.42   The  Satellites  of  Saturn 

The  Astronomical  Almanac  presents  times  of  greatest  eastern  elongation  for  Satel- 
lites I-V,  times  of  elongations  and  conjunctions  for  Satellites  VI-VIH,  apparent 
distances  and  position  angles  for  Satellites  I- VIII,  orbital  elements  referred  to  Sat- 
urn's equator  for  Satellites  I- VIII,  and  differential  right  ascensions  and  declinations 
for  Satellites  VII-IX.  The  orbital  elements  published  are  as  follows:  L,  the  mean 
longitude  reckoned  from  the  ascending  node  of  Saturn's  equator  on  the  Earth's 
equator  along  Saturn's  equator  to  the  ascending  node  of  the  satellite's  orbit  then 
along  the  orbit  to  the  satellite;  M,  the  mean  anomaly;  $,  the  longitude  of  the  as- 
cending node  of  the  orbit  on  Saturn's  equator  measured  from  the  ascending  node 
of  Saturn's  equator  on  the  Earth's  equator;  7,  the  inclination  of  the  orbital  plane 
to  Saturn's  equator;  e,  the  eccentricity;  and  a,  the  semi-major  axis. 

Eclipses,  occultations,  transits,  and  shadow-transits  of  the  satellites  occur  dur- 
ing a  limited  period  each  time  the  Earth  passes  through  the  plane  of  the  rings. 
Methods  for  calculating  these  phenomena  are  described  by  Comrie  (1934).  See  also 
Taylor  (1951). 

Ephemerides  are  not  provided  for  Satellites  X-XVII  though  orbital,  physical, 
and  photometric  data  are  listed  on  pages  F2  and  F3  of  The  Astronomical  Almanac. 
Janus  was  discovered  in  1967.  Epimetheus,  Helene,  Telesto,  and  Calypso  satellites 
were  discovered  by  ground-based  observations  during  1980.  Atlas,  Prometheus,  and 
Pandora  were  discovered  by  Voyager.  Many  of  the  satellites  are  coorbital.  Janus 
and  Epimetheus  follow  horseshoe  paths  in  a  reference  frame  rotating  at  their  mean 
orbital  speed.  Telesto  and  Calypso  orbit  at  the  L4  and  L5  Lagrangian  points  of 
Tethys.  Helene  is  near  the  L4  Lagrangian  point  of  Dione.  Pandora  and  Prometheus 
are  the  shepherd  satellites  of  the  F-ring. 

6.421  Mimas,  Enceladus,  Tethys,  and  Dione  The  orbital  theories  for  Mimas,  Ence- 
ladus,  Tethys,  and  Dione  are  based  on  Kozai  (1957).  The  values  of  the  elements  for 
Mimas,  Enceladus,  Tethys,  and  Dione  are  from  Taylor  and  Shen  (1988),  with  mean 
motion  and  secular  rates  for  Mimas  and  Enceladus  from  Kozai  and  corresponding 
quantities  for  Tethys  and  Dione  from  Garcia  (1972).  The  elements  of  Mimas,  Ence- 
ladus, Tethys,  and  Dione  are  referred  to  equator  of  Saturn  (see  Figure  6.421.1).  The 
only  significant  periodic  perturbations  on  these  satellites  are  the  mutual  perturba- 
tions of  Mimas  and  Tethys,  and  those  of  Enceladus  and  Dione.  In  each  case,  they 
are  caused  by  a  close  2:1  commensurability  of  mean  motions.  These  perturbations 
affect  the  longitude  and  are  denoted  by  AL. 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES 


357 


Figure  6.421.1 

Reference  plane  for  Mimas,  Enceladus,  Tethys  and  Dione.  9\  =  Tfi  +  BC, 
P  =  TB  +  BC  +  CD,N=        and  L\  =  Tfl  +  BC  +  CD  +  mean  anomaly. 


The  orbital  elements  of  Mimas  are  as  follows: 

d=  JD  -  2411093.0, 
t  =  dj  365. 25, 

T=  5?0616[((JD  -2433282.423)/  365.25)+  1950.0-  1866.06], 
a  =  0.00124171  AU, 
n  =  381?994516/day, 
e  =  0.01986, 
7  =  1?570, 

61,  =  49?4-  365?025/, 

h  =  128?839  +  nd  -  43°415  sin  T  -  0?714  sin  3  T 
-  0?020  sin  5  T, 

P=  107?0  +  365?560f,  (6.421-1) 

where  a  is  the  semi-major  axis;  n  the  daily  mean  motion;  e  the  eccentricity;  7  the 
inclination  of  the  orbital  plane  to  Saturn's  equator;  9{  the  longitude  of  the  ascending 
n°de;  ti  the  mean  longitude;  and  P  the  longitude  of  the  pericenter. 


358  EXPLANATORY  SUPPLEMENT 

The  orbital  elements  of  Enceladus  are  given  by: 


d  =  JD  -  2411093.0, 
r  =  cf/365. 25, 
a  =  0.00 15  8935  au, 
«  =  262?73 19052 /day, 
e  =  0.00532, 
7  =  0?036, 
B\  =  145°  -  152?7f, 

hi  =  200?  155  +  nd  +  1 5'.38  sin(59?4  +  32°73  /) 

+  13'.04sin(119?2  +  93?18r), 
P  =  312?7  +  123?42^,  (6.421-2) 

where  the  variables  are  defined  in  the  same  manner  as  for  Mimas. 
The  orbital  elements  of  Tefhys  are  as  follows: 

<f  =  JD-  241 1093.0, 
f  =  <*/365.25, 

T  =  5?0616[((JD  -  2433282.423)  /  365. 25)  +  1950. 0  -  1866. 06], 

a  =  0.00197069  AU, 

n  =  190?697920278  /  day, 

e  =  0. 000212, 

7  =  1?  1 121, 

0,  =  111?41  -72?24754f, 

L\  =  284?9982  +  nd  +  2?0751  sin  T  +  0?0341  sin  3  T 
+  0?0010sin5  7', 

P  =  97°+72°29/,  (6.421-3) 

where  the  variables  are  defined  in  the  same  manner  as  for  Mimas. 
The  orbital  elements  of  Dione  are  given  by: 

d  =  JD  -2411093.0, 
t  =  dl  365.25, 
<j  =  0. 00252413  au, 
n=  131?534920026/day, 
e  =  0. 001715, 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  359 

7  =  0.°  0289, 
<?i  =  228°  -30?6197r, 

U  =  255f  1 183  +  nd  -  0'.88  sin(59?4  +  32°73  f) 

-0'.75  sin(119°2  +  93?18r), 
P  =  173?6  +  30?8381 1,  (6.421-4) 

where  the  variables  are  defined  in  the  same  manner  as  for  Mimas. 

To  determine  the  times  of  eastern  elongation  we  must  first  find  the  orbital 
longitude,  u\  the  longitude  of  the  ascending  node  N  of  the  orbit  on  the  earth's 
equator;  and  the  inclination  of  the  orbit  to  the  Earth's  equator,  J.  From  spherical 
trigonometry  we  have  from  triangle  BFC  in  Figure  6.421.1, 

sin  i  sin  BF  =  sin  7  sin(#j  —  Qe), 

(6.421-5) 

sin  i  cos  BF  -  cos  7  sin  ie  +  sin  7  cos  /„  cos(#i  -  Qs), 
which  can  be  solved  for  BF  and  i.  The  arc  length  FC  can  be  found  from  the  equation 

sin  i  sin  FC  =  sin(0]  -  J7e)  sin  ie.  (6.421-6) 
Similarly,  from  the  triangle  TEF  we  have 


sin  J  sin  N  =  sin  i  sin(  J?e  +  BF), 

sin/cos/V  =  cosjsine  +  sini'cos£COs(/2e  +  BF), 


(6.421-7) 


which  can  be  solved  for  J  and  ./V.  Then  the  arc  EF  can  be  found  from 

sin  J  sin  EF  =  sin(fie  +  BF)  sin  g  (6.42 1-8) 

u  then  follows  from 

u  =  P-9l+EF  +  FC+  true  anomaly.  (6.42 1-9) 

The  tabulated  orbital  elements  7,  a,  and  e  are  listed  above.  The  remaining  elements 
must  be  computed.  From  the  spherical  triangle  TAB  in  Figure  6.421,1  we  have 

sin./e sin AB  =  sine  sin  Qt,  ,  a„, 

(6.421-10) 

sin  Je  cos      -  cos  e  sin  ie  +  sin  g  cos  ie  cos  i?e, 


which  can  be  solved  for  AB. 


360 


Then 


e  =  ex-  J7e+AB, 

L  =  Li  —  Q  +  6, 
M=Li  -  P. 


EXPLANATORY  SUPPLEMENT 


(6.421-H) 


6.422  Rhea,  Titan,  Hyperion,  and  lapetus  The  orbital  theories  for  Rhea  and  Ti- 
tan are  from  Sinclair  (1977).  The  orbital  elements  are  from  Taylor  and  Shen  (1988) 
with  the  mean  motions  and  secular  rates  used  from  Garcia  (1972),  The  theory  and 
orbital  elements  for  Hyperion  are  from  Taylor  (1984).  The  theory  for  the  motion 
of  lapetus  is  taken  from  Sinclair  (1974)  with  some  additional  periodic  terms  from 
Harper  et  ai  (1988).  The  orbital  elements  for  lapetus  are  from  Taylor  and  Shen 
(1988). 

Because  of  the  oblateness  of  Saturn  and  solar  perturbations,  the  orbit  plane  of 
Rhea  precesses  at  constant  inclination  around  the  Laplacian  plane  of  Rhea.  Because 
we  are  using  the  ecliptic  as  the  reference  plane,  this  motion  around  the  Laplacian 
plane  appears  as  periodic  variations  in  A,  vj,  J?,  and  i  .  The  osculating  elements  are 
given  by: 

a  =  0.  00352400au, 
n  =  79?69004007007  day, 
7o  =  0?3305, 
e  sin  tu  =  0. 000210  sin  tt  +  0. 00100  sin  wT, 
ecosro  =  0.000210cos7T  + 0.00100  cos  tuT, 
A  =  359f4727  +  «^ 

+  k sin 70  tan      sin(356?87  -  10?2077  r), 
i  =  ie  -  0?0455 

+  «cos(356f  87  -  10°2077 1)  +  0?0201  cosJVT, 
n  =  J2e  -  0?0078  +  [Ksin70sin(356?87  -  10°2077/) 

+  0?0201  sin  Nj]  I  sin  ie,  (6.422-1) 


where 


7r  =  305°  +  10?2077/, 
wT  -  276?49  +  0?5219(JD  -  241 1368. 0)  /  365. 25, 
iVT  =  44?5  -  0?5219(JD  -  241 1368. 0)  /  365. 25, 

K  =  57P29578, 

d=JD-  241 1093.0, 


ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES 


361 


Figure  6.422.1 

Reference  system  for  Rhea,  Titan,  Hyperion,  lapetus,  and  Phoebe, 
to  =  TF  +  FD  and  A  =  TF  +  FD  +  mean  anomaly. 


t  =  di  365.25.  (6.422-2) 

Here  a  is  the  semi-major  axis;  n  is  the  daily  mean  motion;  e  is  the  eccentricity;  w 
and  A  are  the  longitude  of  pericenter  and  the  mean  longitude,  respectively,  reckoned 
from  the  vernal  equinox  along  the  ecliptic  to  the  ascending  node  and  thence  along 
the  orbit;  i  and  D,  are  the  inclination  and  ascending  node  of  the  orbit  with  respect 
to  the  ecliptic  of  1950.0.  The  angular  elements  are  shown  in  Figure  6,422.1. 

The  coefficient  0.00100  in  the  expressions  for  esinnj  and  ecosn?  is  a  forced 
eccentricity  due  to  Titan.  The  algebraic  expression  for  this  is  given  in  Sinclair 
(1977).  The  inclination  and  node  of  Rhea's  Laplacian  plane  relative  to  the  ecliptic 
(1950.0)  are  i  =  ie  -  0?0455  and  J2  =  J?e  —  0°0078. 

There  are  a  number  of  significant  solar  perturbations  on  Titan's  orbit  and,  as 
for  Rhea,  A,  J7,  and  i  are  affected  by  periodic  variations  due  to  the  reference  plane 
nc>t  being  the  Laplacian  plane.  The  solar  perturbations  are  functions  of  the  mean 
dements  of  the  apparent  orbit  of  the  Sun  about  Saturn.  The  solar  elements  needed 
are  As,  J?s,  and  js  (which  are  defined  in  Figure  6.422.2),  and  /s,  the  mean  anomaly. 


362 


EXPLANATORY  SUPPLEMENT 


Figure  6.422.2 

Angles  needed  to  evaluate  solar  perturbations  on  Titan. 

na  =  TD,  0  =  TA+AB,  w,  =  TD  +  DC,  and  Xs  =  TA+AE. 


Approximate  values  of  i,  f2,  and  W  are  also  needed,  and  these  are  denoted  by  ia, 
J?a,  and  C7a.  These  quantities  are  given  by  the  following  expressions: 

T  =  (JD  -  2415020. 0)  /  36525 

ls  =  175?4762+  1221  ?55 15  7 

i,  =  2?4891  +0.°  002435  T 
J7S  =  113?350-0?2597  7" 
As  =  267?2635+  1222?  1136  T- 

/  =  (JD-  241 1368.0)/  365. 25 

k  m 57?29578 

t,  =  ie  -  Of 6204+  Ksin0f2990cos(41°28  -  0?5219/) 
na  =  Qe  -  0?  1418  +  Ksin  0?2990sin(41?28  -  0f5219  f)  /  sin/e 
CTa  =  275?837  +  0?5219r  (6.422-3) 


6  /  ORBITAL  EPHEMER1DES  AND  RINGS  OF  SATELLITES  363 

The  quantities  (ie  -  0?6204)  and  (l?e  -  Of  1418)  define  the  inclination  and  node  of 
the  Laplacian  plane  of  Titan.  The  auxiliary  angles — 0,  T,      g,  and  Ls — are  given 

by: 

cos  r  =  cos  t's  cos  j'a  +  sin  t's  sin  ia  cos(J?a  -  J?s), 
sin  F  sin  <P  =  sin  t's  sin(i?a  —  J2S), 
sin  T  cos    =  cos  is  sin  ia  —  sin  is  cos  ia  cos(J2a  -  J?s), 
sin  T  sin(#  —      =  sin  z'a  s'm(Q-d  -  fis), 
sin  T  cos(9  —  J?s)  =  —  sin  is  cos  i"a 

+  cos  is  sin  t'a  cos(J?a  -  f2s), 
Ls  =  As  -  (0  -  f2s)  -  f2s, 

g  =  ma-  a^-V.  (6.422^) 

The  osculating  elements  of  Titan  are  given  by: 

a  =  0. 00816765  au, 
n  =  22?57697385/day, 

e  =  0.02881 5  -0.000184  cos  2g  + 0.000073  cos  2(L*  -  g), 
w  =  w&  +  k[0.  00630  sin  2g  +  0. 00250  sin  2(L5  -  g)], 

A  =  261?3121  +«rf+  «[sin70tan  ^/esin(41?28 

-  0?52 19  f)  -  0. 0001 76  sin  J,  -  0. 000215  sin  2L, 
+  0. 000057  sin(2Ls  + !?)], 
i  =  ia  +  0.  000232k  cos(2Ls  +  9), 

Q  =  Qa  +  0.  000503k  sin(2Ls  +  P\  (6.422-5) 

where  d=  JD  -  2411368.0;  f  =  4/365.25;  and  k  =  57? 29578. 

The  algebraic  expressions  for  the  coefficients  of  these  periodic  terms  are  given 
in  Sinclair  (1977). 

The  osculating  elements  of  Hyperion's  orbit  are  given  by: 

a  -  0. 0099040  -  0. 00003422  cos  t  au, 
«=  16?9199514/day, 

e  =  0. 10441  -  0. 00401  cos  r  +  0. 00009  cos(C  -  r) 

+  0. 02321  cos  C  -  0. 00009  cos(C  +  r)  -  0. 001 10  cos  2C 
+  0. 00013  cos(3 1  ?9  +  61 ?7524  7"), 

i  =  ie  -  0?747  +  0?6200cos(105?31  -  2?392  70 


364  EXPLANATORY  SUPPLEMENT 

+  0°315cos(38?73  -  Of  5353  r) 
-0?018cos(i3o+24°44r), 
n  =  Qe  +  ((-0P061  +  0?6200sin(105°31  -  2?392D 
+  0°315  sin(38°73  -  0°5353  71 

-  0?018  sin(13°  +  24°44  7))  I  sin(ie  -  0. 747), 
A=  176°7481  +  wj  +  0°1507sin(105?31  -2?3927) 

+  9?089  sin  r  +  0?007  sin  2r  -  0°014  sin  3t 

+  0?  192  sin(C  -  t)  -  0?091  sin  C  +  Of  21 1  sin(C  +  r) 

-  0?013  sin(176°  +  12°22  T)  +  0?017  sin(8°  +  24?44  T), 
tu  =  69?993  -  18?6702r  +  0?1507sin(105?31  -2°392T) 

-0?47sinr-  13?36  sin  C  +  2°  16sin2C 

+  0?07sin(31?9  +  61o7524D,  (6.422-6) 

where 

d  =  3D-  2415020.  0, 

71  -  ( JD  -  2433282. 42345905)  /  365. 2422  +  50. 0, 
t  =  93?13  +  0°562039rf, 
C=  148?72-  19°  184  T. 

Here  again  the  elements  are  reckoned  in  the  same  way  as  for  Rhea. 

The  orbital  plane  of  Iapetus  is  inclined  at  about  8°  to  its  Laplacian  plane, 
which  is  itself  inclined  at  about  15°  to  the  equatorial  plane  of  Saturn,  and  12°  to 
the  orbital  plane  of  Saturn.  As  a  result,  the  motion  of  the  orbital  plane  of  Iapetus 
is  quite  complicated,  and  is  described  by  cubic  polynomials  in  time  for  ;  and  Q- 
The  osculating  elements  are  computed  as  follows: 

/=  JD  -  2409786.0, 
tc  =  tl  36525, 

T  =  (JD  -  241 5020. 0)  /  36525. 

The  elements  computed  from  constant  and  secular  terms  are: 

a  =  0. 02380984  au, 

n  =  4f53795711  /day, 

e  =  0. 0288 1 84  +  0. 000575  tc, 

i  =  18?45959-0°9555/c  -  0? 0720  %  +0.0054  f3, 


6  j  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  365 

A  =  76°  19854 + 
ro  =  352?905  +  ll°65fc, 

n  -  143?  1294  -  3f 797  tc  +  0?  1 1 6  t2c  +  Of 008  i* .  (6.422-7) 

The  auxiliary  angles  needed  to  compute  periodic  terms  are  calculated  as  follows: 

#  =  4°367-0?195  7\ 
0  =  146?819-  3°918  7/, 
As  =  267?263  +  1222. 114  T, 
H7s  =  91°796  +  0f562r, 
AT  =  261°319  +  22?576974(JD  -  2411368.0), 
H7T  =  277°  102  +  0°001389(JD  -  241 1368. 0), 
<£  =  60°470+l°521  T, 

§  =  205?055  -  2?091  T.  (6.422-8) 
From  these  we  compute  the  following: 

/  =  A  -  m, 

lT  =  AT  —  wj, 

g  =  zu  —  n  —  6, 

gj  —  Wi  — 

g]  =  w  -  n  -  (6.422-9) 

Some  of  the  expressions  for  the  perturbations  involve  e  and  i.  For  these  the  following 
expressions  are  used. 

e  =  0.0288184  +  0?000575?c,  ]m 

(0.4Z2-1U) 

i  =  18?45959  -  0?9555  te  -  0?0720f?  +  0?0054fc3. 
The  following  perturbations  are  to  be  added  to  the  elements 

Aa  =  10"5a[7.  87cos(2/  +  2g  -  %  -  2gs)  +  98. 79cos(/  +  gi  -  h  -  gt)] 
Ae  =  10_5[- 140. 97  cos{gi  -  gT)  +  37. 33  cos(2/s  +  2gs  -  2g) 

+  1 1 . 80  cos(/  +  2g  -  21s  -2gs)  +  24. 08  cos  I  +  28. 49  cos(2/  +  gi  -  h  -  gt) 

+  61.90cos(/T  +  gT  -gi)  +  0.496cos(3/s  +  2gs  -  2g)] 


366  EXPLANATORY  SUPPLEMENT 

A/  =  Of 04204  cos(2/s  +  2gs  +  0)  +  Of 00235  cos(/  +  g\  +  lT  +  gl  +  <f>) 
+  Of 00360  cos(/  +  g]  -  h  -  gj  +  (p)  +  Of 0005  cos(4/s  +  2gs) 
+  0f0058cos(3/s  +  2gs)  -  0f0024cos(/s  +  2gs) 
AA  =  -Of 04299  sin(/  +  g]  -  lT  -  gT)  -  Of 00789  sin(2/  +  2g  -  2/5  -  2gs) 

-  0f06312  simJi  -  0f00295  sin2/s  -  0°02231  sin(2/s  +  2gs) 
+  Of 00650  sin(2/s  +  2gs  +  0) 

Atu  =  [Of 08077  sin(gi  -  gT)  +  0f02139  sin(2/s  +  2gs  -  2g) 

-  0°00676  sin(/ +  2/g  -  2/s  -  2gs)  +  OfO 1380 sin/ 

+  0?01632sin(2/  +  gi  -  /T  -gT)  + Of 03547  sin(/T  +  gj  -  gj) 
+  Of 00028  sin(3/s  +  2gs  -  2g)]  I  e 
AH  -  [0?04204  sin(2/s  +  2g%  +  $)  +  0?00235  sin(/  +  gi  +  lT  +  gT  +  <j>) 
+  0?00358  sin(/  +  g\  -  h  -  8t  +  4>)  -  Of 0006  sin  2/s 
+  0?0003  sin(4/s  +  2gs)  +  Of 0028  sin(3/s  +  2gs) 

-  0?0012  sin(/s  +  2gs)  -  Of  0142  sin  /J  /  sin  i,  (6.422^1 1) 

To  determine  J,  u,  and  N,  we  can  use  the  spherical  triangle  TEF  in  Fig- 
ure 6.422.1  to  obtain 

sin  /  sin  N  =  sin  i  sin  Q, 

(6.422-12) 

sin  J  cos  N  =  cos sin  e  +  sin  i  cos  e  cos  Q, 
which  can  be  solved  for  N  and  J.  The  arc  <j>  can  be  found  from  the  equation 

sin  J  sin  <j>  =  sin  Q  sine.  (6.422-13) 

u  then  follows  from 

u-w  —  Q  +  4>  +  true  anomaly  (6.422-14) 

The  tabulated  orbital  elements  a  and  e  are  shown  previously.  The  remaining 
elements  are  computed  as  follows.  To  calculate  6  we  first  find  the  arc  AC  in  Fig- 
ure 6.421.1.  From  spherical  trigonometry  we  have  for  the  triangle  AEC: 

sm(N -Ne)cot6  =  cos(N-Ne)cosJe-smJecotJ,  (6.422-15) 

which  can  be  solved  for  6.  M  is  given  by 


M  =  X-Q. 


(6.422-16) 


6  /  ORB|TAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES 

^  be  determined  by  the  formula 


367 


siii7sin0  =  sin7sin(/V  -  Ne).  (6.422-17) 
I  js  found  by  first  finding  the  arc  length  FC  from 

sin  FC  sin  7  *  sin(  Q  -  Qt)  sin  ( .  (6.422-1 8) 

L  is  then  given  by 

L=X-  n  -  FC  +  6.  (6.422-19) 

The  differential  coordinates  of  Hyperion  and  Iapetus  are  computed  as  follows: 
the  rectangular  coordinates  x  and  y  of  the  satellite  in  the  orbital  plane  are  found 
from  Equations  6.15  3.  These  coordinates  axe  then  transformed  to  the  Earth  equa- 
tor and  equinox  by  Equations  6.15-4  and  6.15-5.  The  differential  coordinates  £  and 
77  are  then  computed  through  Equations  6.15-8. 

6.423  Phoebe  The  orbital  elements  used  in  The  Astronomical  Almanac  are  those 
determined  by  Zadunaisky  (1954).  The  ephemerides  consist  of  differential  right 
ascensions  and  declinations  given  at  2-day  intervals.  The  elements  are  referred  to 
the  ecliptic  and  equinox  of  1950.0.  The  values  of  the  elements  are  as  follows: 

a  =  0. 0865752  AU, 

A  =  277f  872  -  Of  6541068 1, 

e-0. 16326, 

m  =  280f  165  -Of  19586 T, 
i=  173f949  -0f020F, 
fi  =  245?998  -Of41353  7\  (6.423-1) 

where 

/  =  JD-  2433282. 5, 
r=f/365.25. 

«  is  the  semi-major  axis;  A,  the  mean  longitude  measured  from  the  equinox  along 
the  ecliptic  to  the  ascending  node  then  along  the  orbit;  e,  the  eccentricity;  w,  the 
iongitude  of  the  pericenter  reckoned  from  the  equinox  along  the  ecliptic  to  the 
ascending  node  then  along  the  orbit  to  the  pericenter;  /,  the  inclination  of  the  orbit 
to  the  ecliptic;  and  Q,  the  longitude  of  the  ascending  node  of  the  orbit  on  the 
ecliptic  reckoned  from  the  equinox. 


368  EXPLANATORY  SUPPLEMENT 

To  compute  the  differential  right  ascension  and  declination,  the  x  and  y  coor- 
dinates in  the  orbital  plane  are  found  using  Equation  6.15-3,  where 

M=X-w.  (6.423-2) 

The  coordinates  are  transformed  to  the  Earth  equator  and  equinox  using  Equa- 
tions 6.15-4  and  6.15-5.  Finally,  £  and  r\  are  computed  from  Equation  6.15-8. 


6.5   THE  RINGS  AND  SATELLITES  OF  URANUS 

Orbital  elements  are  given  for  the  rings  of  Uranus  as  determined  by  Elliot  et  al. 
(1981).  Ephemerides  are  given  for  the  elongations  and  for  the  apparent  distance 
and  position  angle,  of  Satellites  I  through  V;  Ariel,  Umbriel,  Titania,  Oberon,  and 
Miranda.  The  orbital  elements  of  these  satellites  are  from  Laskar  and  Jacobson 
(1987).  The  theory  is  developed  in  elliptical  elements.  Secular  terms  and  periodic 
terms  with  amplitudes  greater  than  0?05  at  opposition  are  quoted  below, 

Miranda 

mIMxi  =0.075  x  10-5, 

n  =  4. 44352267  -  136. 65  cos(0. 621  T+5. 89)  radians/day, 
L  =  -0. 23805158  +  4. 44519055  T 

+  0. 02547217  sin(-2. 18167  x  10_4T  +  1.32) 

-  0. 0030883 1  sin(-4. 36336  x  10~4T  +  2. 64) 
-3.181  x  10_4sin(-6. 54502  x  10^4T  + 3.  97)  radians, 

Z=  1.31238  x  10"3  exp      5273  x  KT4T  + 0.61) 

-  1.2331  x  10~4  expi(0. 08606  T  +  0, 15) 

-  1.9410X  10^4exp/(0.709T+6.04), 

C  =  0. 03787171  expi(-l. 54449  X  10~4T+5.70).  (6.5-1) 

Ariel 

m/Mv  =  1.49  x  10-5, 

n  =  2. 49254257  radians/day, 
1  =  3. 09804641  +  2. 49295252  T 

-  1. 86050  x  10-3sin(-2. 18167  x  \0~AT  +  1.32) 

+  2. 1999  x  10"4  sin(-4.  36336  x  10  4r+  2. 64)  radians, 
i=  1.18763  x  10^3exp/(4.  727824  x  10_5r+2.41) 


/  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  369 

+  8.6159x  10_4expi(2. 179316x  10-5T  +  2.07), 
C  -  3. 5825  x  10  4  exp  i(-4. 782474  x  10_5T  +  0. 40) 

+  2. 9008  x  10~4  exp  t(-2. 156628  x  10"5T  +  0. 59).  (6.5-2) 

Umbriel 

m/Mv  =  1.45  x  10~5, 

n  -  1. 51595490  radians/day, 

L  =  2. 28540169  +  1.51614811  T 

+  6.6057  X  10_4sin(-2. 18167  x  10_4T+ 1.32)  radians, 

Z  =  -2.2795  X  10  4 exp  i(4. 727824  x  10^7+2. 41) 
+  3. 90469  x  10-3  exp  i(2. 179132  x  10-57  +  2,07) 
+  3.0917  x  10"4 exp t'(l. 580524  x  10_5T+0.74) 
+  2.2192  x  10-4  exp  i(2. 9363068  x  10-6T  +  0.43) 
+  5. 4923  x  10~4  exp  i'(-0. 01 157  T  +  5. 7 1), 

C=  1.11336  x  10~3  exp  f(-2. 156628  T  +  0.  59) 

3.5014  x  10-4exp/(-l. 401373  xl0-5T+ 1.75).  (6.5-3) 

Titania 

m/Mu  =  3.97x  10"5, 

n  =  0. 72166316  radians/day, 

L  =  0.  85635879  +  0. 72171851  Tradians, 

2  =  9.3281  x  10~4  exp      580524  x  10_5r+0.74) 
+  1. 12089  x  10~3  exp  i(2. 9363068  X  10_6T  +  0.43) 
+  7. 9343  x  10~4  exp  i(-6. 9008  x  10_3T+ 1.  82), 

C  =  6. 8572  x  10-4  exp  /(- 1 . 401373  x  10_5T  +  1 . 75) 

+  3. 7832  x  10-4  exp        9713918  x  10-6T  +  4.21).  (6.5—4) 

Oberon 


m!Mv  =  3.45  x  10-5, 

n  =  0.46658054  radians/day, 

L  =  -0.91559180  +  0. 466692 1 2  T  radians, 


370  EXPLANATORY  SUPPLEMENT 

z=  -7.5868  x  1  (T4expi'{l.  580524  x  Kr57"  +  0.74) 
+  1. 39734  x  10-3  exp  f(2. 9363068  x  I0_67;  +  0.43) 
-  9.8726  x  10-4 exp i(-6. 9008  x  10_3r+ 1. 82), 

C  =  -5.9633  x  10~4 exp /(-l. 401373  x  IQ~5T+  1.75) 

+  4.5169  x  10_4expi(-l. 9713918  x  10"67"  +  4.21),  (6.5-5) 

with  T  =  JD  -  2444239. 5  and  i  =  xf^l. 

Here  m  I  M\j  is  the  ratio  of  the  mass  of  the  satellite  to  the  mass  of  Uranus;  n  is 
the  daily  mean  motion;  L  is  the  mean  longitude  measured  from  the  ascending  node 
of  Uranus'  equator  on  the  Earth's  equator  to  the  ascending  node  of  the  satellite 
orbit  on  Uranus'  equator  along  the  orbit  to  the  mean  position  of  the  satellite,  z  and 
(  are  converted  to  classical  elements  with  the  following  formulas 

z  =  e  exp((P), 

7  (6.5-6) 
C  =  sin  —  exp(((9), 

where  e  is  the  eccentricity;  P  is  the  longitude  of  the  pericenter  reckoned  from  the 
ascending  node  of  Uranus'  equator  on  the  Earth's  equator  of  1950.0,  along  Uranus' 
equator  to  the  ascending  node  of  the  orbit  on  Uranus'  equator,  and  then  along  the 
orbit  to  the  pericenter;  7  is  the  inclination  of  the  orbital  plane  to  Uranus'  equator; 
6  is  the  longitude  of  the  ascending  node  of  the  orbit  on  Uranus'  equator  measured 
from  the  ascending  node  of  Uranus'  equator  on  the  Earth's  equator. 

Referred  to  the  Earth's  equator  the  motions  of  the  satellites  are  direct.  However, 
referred  to  the  ecliptic  they  are  retrograde,  having  an  angle  of  inclination  of  roughly 
98°.  The  orbital  plane  is  inclined  at  such  a  large  angle  to  the  Earth's  equator 
that  the  semi-major  axis  of  the  apparent  orbit  usually  lies  nearly  north  and  south. 
Consequently,  the  greatest  elongations  are  designated  as  northern  and  southern 
elongations  instead  of  eastern  or  western.  Only  when  the  Earth  is  near  the  plane 
through  the  celestial  pole  perpendicular  to  the  orbital  plane,  as  during  1986-1987, 
is  the  minor  axis  of  the  apparent  orbit  directed  approximately  north  and  south. 
Even  then,  the  north  pole  of  the  orbital  plane  may  lie  to  the  south  of  the  geocentric 
position  of  Uranus.  The  north  pole  of  the  orbital  plane  is  that  from  which  the 
satellites'  motion  appears  to  be  counterclockwise.  This  pole  corresponds  to  the 
physical  ephemeris  south  pole  of  Uranus,  which  is  defined  as  lying  south  of  the 
invariable  plane  of  the  solar  system. 

During  the  course  of  one  revolution  of  Uranus,  the  Earth  passes  twice  through 
the  plane  perpendicular  to  the  orbital  plane  when  the  apparent  orbits  of  the  satel- 
lites are  almost  circular;  and  likewise,  it  passes  twice  through  the  orbital  plane  when 
the  apparent  orbits  become  straight  lines.  The  Earth  passed  through  the  orbital 
plane  from  south  to  north  in  1966,  and  the  sequence  of  geometric  relations  during 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  371 

the  interval  from  then  until  2050  exemplifies  the  cycle  during  the  84-year  period  of 
Uranus. 

1966-2008:     Earth  north  of  orbital  plane;  B  positive. 

Superior  conjunction  at  position  angle  P. 
1966-1986:     Northern  elongation  at  P  +  90°,  when  u  -  U  =  90°. 
1986:  Earth  passed  through  plane  perpendicular  to 

orbital  plane,  at  17=  270°. 
1986-2008:     Northern  elongation  at  P  -  90°,  when  u  -  U  =  270°. 
2008:  Earth  passes  through  orbital  plane,  north  to 

south;  B  =  0°. 
2008-2050:     Earth  south  of  orbital  plane;  B  negative. 

Superior  conjunction  at  position  angle  P+  180°. 
2008-2030:     Northern  elongation  at  P  -  90°,  when  u-  U  =  270°. 
2030:  Earth  passes  through  plane  perpendicular  to 

orbital  plane,  at  If  —  90°. 
2030-2050:     Northern  elongation  at  P  +  90°,  when  u  -  V  =  90°. 

At  the  passage  of  the  Earth  through  the  plane  perpendicular  to  the  orbital 
plane,  the  position  angle  of  the  northern  elongation  changes  by  180°,  because  the 
more  northerly  and  more  southerly  extremities  of  the  major  axis  are  interchanged. 
The  angle  P  is  the  position  angle  of  the  pole  of  the  orbital  plane  that  lies  north  of  the 
celestial  equator;  but  either  the  eastern  or  western  extremity  of  the  minor  axis  may 
be  directed  toward  this  pole,  according  to  circumstances.  Northern  elongation  may 
be  to  either  the  east  or  west  of  north.  The  elongations  cannot  be  unambiguously 
designated  as  eastern  and  western. 

To  calculate  the  values  of  J,  u,  and  N,  consider  spherical  triangle  ABD  in  Fig- 
ure 6.5.1.  Spherical  trigonometry  gives  us: 


sm.Jsin(N  —  Ne)  =  sin  7  sin  0, 

(6.5-7) 

sin/cos^  -  Ne)  =  cos  7  sin /e  +sin7COsJecos6l, 


which  can  be  solved  for  /  and  N.  The  values  of  Ne  and  Je,  the  longitude  of  the 
ascending  node  of  Uranus'  equator  and  its  inclination  to  the  Earth's  equator,  are 
found  from  the  coordinates  of  Uranus'  south  pole:  a0  =  187?43  and  S0  =  -15?  10 
(Davies,  1989): 


7Ve  =  a0  +  90°, 
Je  =  90°  -  So. 


(6.5-8) 


372 


EXPLANATORY  SUPPLEMENT 


Figure  6.5.1 

Reference  system  for  the  Uranian  satellites.  N  =  TD,  P  =  AB  +  BC, 
and  L  =  AB  +  BC  +  mean  anomaly. 


The  arc  length  DB  is  found  from 

sin DB  sin  7  =  $\n(N  -  Nc)s'mJe.  (6.5-9) 

Then 

u  =  L-6  +  DB  +  (f-M),  (6.5-10) 

where  (/  —  Af)  is  the  equation  of  center  which  can  be  found  from  Equation  6.11-1, 
and 

M  =  L-P.  (6.5-11) 

Orbital,  physical,  and  photometric  data  are  presented  on  pages  F2-F3  of  The 
Astronomical  Almanac  for  10  small  satellites  discovered  by  Voyager.  The  orbits  of 
these  satellites  all  lie  inside  the  orbit  of  Miranda.  Cordelia  and  Ophelia  are  shepherd 
satellites  for  the  e-ring.  It  has  also  been  proposed  that  Cordelia  is  the  outer  shepherd 
for  the  <5-ring,  and  that  Ophelia  is  the  outer  shepherd  of  the  7-ring. 


g  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES 

6  6   THE  SATELLITES  OF  NEPTUNE 


373 


Ephemerides  are  given  for  the  elongations  and  for  the  apparent  distance  and  po- 
sition angle  of  Triton,  calculated  from  the  orbital  elements  determined  by  Harris 
(1984)-  Differential  right  ascensions  and  declinations  are  given  for  Nereid  from  or- 
bital elements  computed  by  Mignard  (1981). 

6.61  Triton 

The  orbit  of  Triton  is  retrograde.  The  orbit,  as  far  as  it  has  been  determined  from 
observations,  is  circular.  The  orbital  plane  is  defined  with  respect  to  a  fixed  reference 
plane.  This  reference  plane  is  defined  such  that  the  projections  of  spin  angular 
momentum  of  Neptune  and  the  orbital  angular  momentum  of  Triton  on  the  plane 
are  equal  and  opposite.  The  pole  of  this  fixed  plane  with  respect  to  the  Earth's 
equator  and  equinox  of  J2000.0  are 

ap  =  298.°  72  +  2. 58  sin N  -  0. 04  sin  2/V, 
5P  =  42.°63  -  1. 90cosJV +  0.01  cos  2JV, 

(6.61-1) 

N  =  359.°  28  +  54.°  308  T, 

T  =  (JD  -  245 1 545. 0)  /  36525. 

The  orbital  elements  of  Triton  referred  to  the  fixed  plane  (see  Figure  6.61.1)  are 

tQ  =  JD24332S2.5, 
a  =  488"49, 
e  =  0, 

n  =  61  "2588532/  day, 
Lq  =  200f  913, 

7  =  158°996  =  21?004  retrograde, 

9  =  151?40]  +0?57806(JD  -  t0)/  365. 25,  (6.61-2) 

where  a  is  the  greatest  elongation  at  unit  distance;  e  is  the  eccentricity;  «  is  the 
daily  mean  motion;  Lq  is  the  mean  longitude  reckoned  from  the  ascending  node 
through  the  invariable  plane  at  epoch;  7  is  the  inclination  of  the  orbital  plane  to 
the  invariable  plane;  and  6  is  the  angle  from  the  intersection  of  invariable  plane  with 
the  Earth's  equatorial  plane  of  1950.0  to  the  ascending  node  of  the  orbit  through 
the  invariable  plane. 

Because  the  retrograde  direction  of  the  motion  is  represented  by  an  orbital 
inclination  greater  than  90°,  the  ascending  node  of  the  orbit  is  the  point  at  which 


374 


EXPLANATORY  SUPPLEMENT 


Figure  6.61.1 

Reference  system  for  Triton.  N  =  TC. 


the  satellite  crosses  the  equator  from  south  to  north.  The  pole  of  the  orbit  from 
which  the  motion  appears  counterclockwise  is  the  south  pole,  at  position  angle  P. 
Elongation  is  at  position  angle  P  -  90°,  when  u—U=  270°. 

Twice  during  the  course  of  one  revolution  of  Neptune,  about  165  years,  the 
Earth  passes  through  the  orbital  plane  of  Triton,  when  the  apparent  orbit  becomes 
a  straight  line.  The  Earth  crossed  the  orbital  plane  from  north  to  south  near  the  end 
of  1952;  for  an  interval  during  1950-1954,  Triton  transited  the  disk  of  Neptune  and 
was  occulted  by  the  disk  during  each  revolution.  Before  1953,  B  was  negative,  and 
inferior  conjunction  was  on  the  southern  arc  of  the  apparent  orbit  at  position  angle 
P.  Since  the  passage  through  the  orbital  plane,  B  has  been  positive,  and  inferior 
conjunction  is  on  the  northern  arc  at  P  +  180°.  The  Earth  will  pass  through  the 
orbital  plane  again  in  2035. 

When  the  numerical  value  of  B  reaches  a  maximum  as  the  Earth  passes  through 
the  plane  perpendicular  to  the  orbital  plane,  as  in  1987,  the  minor  axis  of  the 
apparent  orbit  lies  exactly  north  and  south,  the  major  axis  lies  east  and  west,  and 
the  position  angle  of  the  more  northerly  elongation  changes  by  180°.  Before  1987, 
the  western  elongation  was  the  more  northerly;  since  then,  the  eastern  elongation 
has  been  the  more  northerly. 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  375 

The  computation  of  J,  u,  and  N  is  as  follows.  From  the  spherical  triangle  in 
Figure  6.61.1  we  have 

sin  Jsin(Af  ~  Nt)  =  sin  i  sin  8, 

(6.61-3) 

sin  J  cos(W  —  Ne)  =  cos  i  sin  Je  +  sin  i  cos  7e  cos  8, 

which  can  be  solved  for  J  and  N.  Ns  and  7e,  the  longitude  of  the  node  and  the 
inclination  of  the  invariable  plane  to  the  Earth's  equator,  are  found  from 


Ne  =  ap+ 90°, 
Je  =  90°  -  <5p. 


(6.61-4) 


The  arc  length  CB  can  be  computed  from 

sin  CB  sin  i  =  sin(iV  -  Ne)  sin  7e.  (6.61-5) 

u  follows  from 

u=Lo+DB  +  n(JD  - 10),  (6.61-6) 
where  JD  is  the  Julian  date  of  interest. 

6.62  Nereid 

The  orbit  of  Nereid  is  unique  among  the  satellites  in  the  solar  system,  because  of  its 
extreme  eccentricity  and  the  great  difference  in  its  inclination  from  that  of  Triton. 
The  orbital  elements  of  Nereid  with  respect  to  the  orbital  plane  of  Neptune  are  (see 
Figure  6.62.1): 

a  =  0. 036868  AU, 

e  =  0. 74515  -  0. 006  cos  29  +  0. 0056  cos(2u>  -  2(6), 
cos  7  =  cos  10?041  -  0?0094cos  29, 

0  =  329?3  -2?4r+  19?7sin2!?-  303sin4!? 

+  0°7sin6<?  +  0?357  sin 20+  l°276sin(2u;  -  24>), 
P=9  -  19?25sin2^  +  3?23sin4!P 

-  0°725  sin  69  -  0°351  sin  24>  -  0°7  sin(2w  -  2(6), 
M  =  358?  91  +  nt  -  0?38  sin2#  +  l?0sin(2w  -  20), 
n  =  0?999552/day,  (6.62-1) 

where  9  ■  282?9+2°68  T  and  2<f>  =  107?4+0f  01 196  f.  T  is  reckoned  in  Julian  centuries 
and  f  in  days  from  JD  2433680.5.  The  inclination,  7,  is  referred  to  Neptune's  orbital 


376 


EXPLANATORY  SUPPLEMENT 


Figure  6.62.1 

Reference  system  for  Nereid.  N  =  TD  and  P  =  AB  +  BC. 


plane.  The  longitude  of  the  node,  8,  is  measured  in  Neptune's  orbital  plane  from 
its  intersection  with  the  1950.0  celestial  equator.  The  orbit  of  Neptune  is  taken  to 
have  inclination,  Jc  =  22?313,  and  longitude  of  ascending  node,  Nc  =  3?522  with 
respect  to  the  1950.0  celestial  equator.  M  is  the  mean  anomaly;  u>,  the  argument  of 
pericenter;  e,  the  eccentricity;  and  n,  the  mean  daily  motion. 

The  differential  right  ascension  and  declination  x  and  y  coordinates  in  the  orbital 
plane  are  computed  from  the  Equations  6.15-3.  These  coordinates  are  transformed 
to  the  orbital  plane  using 


=  R3(-0)R,(-7)R3(-P) 


(6.62-2) 


These  coordinates  are  then  transformed  to  the  Earth  equator  and  equinox  of 
1950.0  using 


22  J 


=  R3(-JVe)R|  (-./,) 


(6.62-3) 


g  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  377 

The  coordinates  X2,  y2,  Z2  are  then  used  to  compute  f  and  77  with  Equations 
6.15-8- 


6j   THE  SATELLITE  OF  PLUTO 

Times  of  northern  elongation,  apparent  distances,  and  position  angles  are  presented 
in  The  Astronomical  Almanac  for  Charon.  The  orbital  elements  from  which  these 
are  calculated  are  taken  from  Tholen  (1985).  The  elements,  referred  to  the  Earth's 
equator  and  equinox  of  1950.0,  are 

a  m  0:'00012788, 
n  =  56?3625  /  day, 
J  =  94?3, 
/V  =  223°7, 
k  =  78°6, 

to  =  JD2445000.  5,  (6.7-1) 

where  a  is  the  semi-major  axis;  n,  the  mean  daily  motion;  J,  the  inclination  of  the 
orbital  plane  to  the  Earth  equator  of  1950.0;  N,  the  longitude  of  the  ascending  node 
reckoned  from  the  vernal  equinox;  Iq,  the  mean  longitude  at  epoch  reckoned  from 
the  ascending  node  along  the  orbit;  and  to,  the  date  of  epoch. 

The  orbit  of  Charon  is  retrograde.  The  pole  of  the  orbit  from  which  the  motion 
appears  counterclockwise  is  the  south  pole,  at  position  angle  P.  Elongation  is  at 
position  angle  P  -  90°,  when  u-U  =  270°. 

Twice  during  the  course  of  one  revolution  of  Pluto,  about  248  years,  the  Earth 
passes  through  the  orbital  plane  of  Charon,  when  the  apparent  orbit  becomes  a 
straight  line.  The  Earth  crossed  the  orbital  plane  three  times  during  1987-1988, 
the  end  result  being  a  crossing  from  north  to  south.  In  the  interval  1985-1990, 
Charon  transits  the  disk  of  Pluto  and  is  occulted  by  the  disk  during  each  revolution. 
Before  1987,  B  was  negative,  and  inferior  conjunction  was  on  the  southern  arc  of 
the  apparent  orbit  at  position  angle  P.  Since  the  passage  through  the  orbital  plane, 
B  has  been  positive,  and  inferior  conjunction  on  the  northern  arc  at  P+  180°. 

When  the  numerical  value  of  B  reaches  a  maximum  as  the  Earth  passes  through 
the  plane  perpendicular  to  the  orbital  plane,  as  in  2050,  the  minor  axis  of  the 
apparent  orbit  lies  exactly  north  and  south,  the  major  axis  lies  east  and  west,  and 
*e  position  angle  of  the  more  northerly  elongation  changes  by  180°.  Before  2050, 
the  western  elongation  is  the  more  northerly;  after  2050,  the  eastern  elongation  will 
be  the  more  northerly. 


378  EXPLANATORY  SUPPLEMENT 

Since  the  orbit  is  referred  to  the  Earth  equator  and  equinox  of  1950.0,  /  and  N 
are  already  known,  u  is  found  simply  from 


u  =  l0+  fi(JD  -  t0),  (6.7-2) 
where  JD  is  the  Julian  date  of  interest. 


6.8  REFERENCES 

Adams,  J.C.  (1877).  "Continuation  of  Tables  I  and  III  of  Damoiseau's  Tables  of  Jupiter's 

Satellites"  Nautical  Almanac  for  1881  Appendix,  15-23. 
Aksnes,  K.  (1978).  "The  Motion  of  Jupiter  XIII  (Leda),  1974-2000"  Astron.  J.  83,  1249- 

1256. 

Andoyer,  H.  (1915).  "Sur  le  Calcul  des  Ephemerides  des  Quatres  Anciens  Satellites  de 

Jupiter"  Bull.  Astr.  32,  177-224. 
Arlot,  J.-E.  (1982).  "New  Constants  for  Sampson-Lieske  Theory  of  the  Galilean  Satellites 

of  Jupiter"  Astron.  Astrophys.  107,  305-310. 
Bessel,  F.W.  (1875a).  "Untersuchungen  fiber  den  Planeten  Saturn,  seinen  Ring  und  scinen 

vierten  Trabanten"  Abhandlungen  I,  110-127. 
Bessel,  F.W.  (1875b).  "Bestimmung  der  Lage  und  Grosse  des  Saturnsringes  und  der  Fugur 

und  Grosse  des  Saturns"  Abhandlungen  I,  150-159. 
Bessel,  F.W.  (1875c).  "Ueber  die  Neigung  der  Ebene  des  Saturnsringes"  Abhandlungen  I, 

319-321. 

van  Biesbroeck,  G.  (1957).  "The  Mass  of  Neptune  from  a  New  Orbit  of  Its  Second  Satellite 

Nereid"  Astron.  J.  62,  272-274. 
Bobone,  J.  (1937a).  "Tablas  del  VI  (sexto)  Satelite  de  Jupiter"  Ast.  Nach.  262,  321-346. 
Bobone,  J.  (1937b).  "Tablas  del  VII  (septimo)  Satelite  de  Jupiter"  Ast.  Nach.  263,  401- 

412. 

Born,  G.H.  and  Duxbury,  T.C.  (1975).  "The  Motions  of  Phobos  and  Deimos  from  Mariner 

9  TV  Data"  Cel.  Mech.  12,  77-88. 
Brouwer,  D.  and  Clemence,  G.M.  (1961).  Methods  of  Celestial  Mechanics  (Academic  Press, 

London),  chapter  XVI. 
Christy,  J.W.  and  Harrington,  R.J.  (1978).  "The  Satellite  of  Pluto"  Astron.  J.  83,  1005- 

1008. 

Cohn,  F.  (1897).  "Bestimmung  der  Bahnelemente  des  V.  Jupitersmondes"  Ast.  Nach.  142, 
289-338. 

Comrie,  L.J.  (1934).  "Phenomena  of  Saturn's  Satellites"  Mem.  B.A.A.  30,  97-106. 
Crawford,  R.T.  (1938).  "The  Tenth  and  Eleventh  Satellites  of  Jupiter"  P.A.S.P.  50,  344- 
347. 

de  Damoiseau,  M.C.T.  (1836).  "Tables  Ecliptiques  des  Satellites  de  Jupiter"  Paris. 

Davies,  M.E.,  Abalakin,  V.K.,  Bursa,  M.,  Hunt,  G.E.,  Lieske,  J.H.,  Morando,  B.,  Rapp, 
R.H.,  Seidelmann,  P.K.,  Sinclair,  A.T.,  and  Tjuflin,  Y.S.  (1989).  "Report  of  the 
IAU/IAG/Cospar  Working  Group  on  Cartographic  Coordinates  and  Rotational  Ele- 
ments of  the  Planets  and  Satellites:  1988"  Cel.  Mech.  46,  187-204. 

Delambre,  J.B.J.  (1817).  "Tables  Ecliptiques  des  Satellites  de  Jupiter"  Paris. 

Dunham,  D.W.  (1971).  "The  Motions  of  the  Satellites  of  Uranus"  Dissertation.  (Yale 
University,  New  Haven,  CT). 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  379 

Eichelberger,  W.S.  (1892).  "The  Orbit  of  Hyperion"  Astron.  J.  H,  145-157. 
Eicbelberger,  W.S.  and  Newton,  A.  (1926).  "The  Orbit  of  Neptune's  Satellite  and  the  Pole 

of  Neptune's  Equator"  A.P.A.E.  9,  275-337. 
Elliot,  J.L.,  French,  R.G.,  Frogel,  J.A.,  Elias,  J.H.,  Mink,  D.J.,  and  Liller,  W.  (1981). 

"Orbits  of  Nine  Uranian  Rings"  Astron.  J.  86,  444-455. 
gsposito,  L.W.,  Cuzzi,  J.N.,  Holberg,  J.H.,  Marouf,  E.A.,  Tyler,  G.L.,  and  Porco,  C.C. 

(1984).  "Saturn's  Rings:  Structure,  Dynamics,  and  Particle  Properties"  in  Saturn  T. 

Gerhels  and  M.S.  Matthews,  eds.  (University  of  Arizona  Press,  Tucson,  AZ). 
Garcia,  H.A.  (1972).  "The  Mass  and  Figure  of  Saturn  by  Photographic  Astrometry  of  Its 

Satellites"  Astron.  J.  77,  684-691. 
Grosch,  H.R.J.  (1948).  "The  Orbit  of  the  Eighth  Satellite  of  Jupiter"  Astron.  J.  53,  180- 

187. 

Hall,  A.  (1878).  "Observations  and  Orbits  of  the  Satellites  of  Mars"  Washington  Obser- 
vations for  1875  Appendix  I,  1-46. 

Hall,  A.  (1885).  "The  Orbit  of  Iapetus,  the  Outer  Satellite  of  Saturn"  Washington  Obser- 
vations for  1882  Appendix  I,  1-82. 

Hall,  A.  (1886).  "The  Six  Inner  Satellites  of  Saturn"  Washington  Observations  for  1883 
Appendix  I,  1-74. 

Hall,  A.  (1898).  "The  Orbit  of  the  Satellite  of  Neptune"  Astron.  J.  19,  65-66. 

Harper,  D.,  Taylor,  D.B.,  Sinclair,  A.T.,  and  Kaixian,  S.  (1988).  "The  Theory  of  the 

Motion  of  Iapetus"  Astron.  Astrophys.  191,  381-384. 
Harrington,  R.J.  and  Christy,  J.W.  (1981).  "The  Satellite  of  Pluto  III"  Astron.  J.  86, 

442-443. 

Harris,  AW.  (1984).  "Physical  Properties  of  Neptune  and  Triton  Inferred  from  the  Orbit 

of  Triton"  NASA  CP-2330,  357-373. 
Harris,  D.L.  Unpublished  work  on  the  satellites  of  Uranus,  quoted  by  Kuiper  (1956,  p. 

1632). 

Harshman,  W.S.  (1894).  "The  orbit  of  Deimos"  Astron.  J.  14,  145-148.  Harshman's  el- 
ements of  Phobos  "communicated  by  Prof.  Harkness"  are  attached  (in  manuscript) 
to  a  copy  of  this  paper.  It  is  believed  that  they  were  never  published.  See  also  Publ. 
U.S.N.O.  6  Appendix  I,  B21  (1911). 

Herget,  P.  (1938).  "Jupiter  XI"  Harvard  Announcement  Card.  J\63. 

Herget,  P.  (1968).  "Outer  Satellites  of  Jupiter"  Astron.  J.  73,  737-742. 

Herrick,  S.  (1952).  "Jupiter  IX  and  Jupiter  XIP  P.A.S.P.  64,  237-241. 

Kendall,  E.O.  (1877).  An  Extension  for  the  Year  1880  of  Damoiseau's  Tables  of  the  Satel- 
lites of  Jupiter  (probably  never  published). 

Kozai,  Y.  (1957).  "On  the  Astronomical  Constants  of  Saturnian  Satellites  System"  Ann. 
Tokyo  Obs.  Ser.  2  5,  73-106. 

Kuiper,  G.P.  (1949).  "The  Fifth  Satellite  of  Uranus"  P.A.S.P.  61,  129. 

Kuiper,  G.P.  (1956).  "On  the  Origin  of  the  Satellites  and  the  Trojans"  Vistas  in  Astronomy 
2,  1631-1666. 

de  Lalande,  J.J.  (1792).  A stronomie  3rd  edition,  Paris. 

Laskar,  J.  and  Jacobson,  R.A.  (1987).  "An  Analytical  Ephemeris  of  the  Uranian  Satellites" 

Astron.  Astrophys.  188,  212-224. 
Levin,  A.E.  (1931,  1934).  "Mutual  Eclipses  and  Occultations  of  Jupiter's  Satellites"  J. B.A.J 

42,  6-14  (1931).  Mem.  B.A.A.  30,  149-183  (1934). 
Lieske,  J.H.  (1978).  "Theory  of  Motion  of  Jupiter's  Galilean  Satellites"  Astron.  Astrophys. 

56,  333-352. 


380  EXPLANATORY  SUPPLEMENT 

Lieske,  J.H.  (1987).  "Galilean  Satellite  Evolution:  Observational  Evidence  for  Secular 

Changes  in  Mean  Motions"  Astron.  Astrophys.  176,  146-158. 
Marth,  A.  Marth  published  a  long  series  of  ephemerides  for  physical  observations  of  the 

planets  and  for  observations  of  the  satellites.  The  first  and  last  of  each  series  are  alone 

quoted  here. 

Marth,  A.  (1870-1894).  "Ephemeris  of  the  Satellites  of  Uranus"  Mon.  Not.  Roy.  Astron 
Soc.  30,  150  154,  171. 

Marth,  A.  (1873-1895).  "Ephemeris  of  the  Satellites  of  Saturn"  Mon.  Not.  Roy.  Astron 
Soc.  33,  513-555,  164. 

Marth,  A.  (1878-1891).  "Ephemeris  of  the  Satellites  of  Neptune"  Mon.  Not.  Roy.  Astron 
Soc.  38,  475-451,  563. 

Marth,  A.  (1883-1896).  "Data  for  Finding  the  Positions  of  the  Satellites  of  Mars"  Mon. 

Not.  Roy.  Astron.  Soc.  44,  29-56,  435. 
Marth,  A.  (1891-1896).  "Ephemeris  for  Computing  the  Positions  of  the  Satellites  of 

Jupiter"  Mon.  Not.  Roy.  Astron.  Soc.  51,  505-556,  434. 
Mignard,  F.  (1981).  "The  Mean  Elements  of  Nereid"  Astron.  J.  86,  1728-1729. 
Newcomb,  S.  (1875).  "The  Uranian  and  Neptunian  Systems"  Washington  Observations 

for  1873  Appendix  I,  1-74. 
Nicholson,  S.B.  (1944).  "Orbit  of  the  Ninth  Satellite  of  Jupiter"  Astrophys.  J.  100,  57-62. 
Pottier,  L.  (1896).  "Addition  aux  Tables  Ecliptiques  des  Satellites  de  Jupiter  de  Damoi- 

seau"  Bull.  Astr.  13,  67-79  and  107-112. 
Robertson,  J.  (1924).  "Orbit  of  the  Fifth  Satellite  of  Jupiter"  Astron.  J.  35,  190-193. 
Rohde,  J.R.  (1990).  Unpublished. 

Rose,  L.E.  (1974).  "Orbit  of  Nereid  and  the  Mass  of  Neptune"  Astron.  J.  79,  489-490. 
Ross,  F.E.  (1905).  "Investigations  on  the  Orbit  of  Phoebe"  Harvard  Annals  53,  101-142. 
Ross,  F.E.  (1907a).  "Semi-definitive  Elements  of  Jupiter's  Sixth  Satellite"  Lick  Obs.  Bull. 
4,  110-112. 

Ross,  F.E.  (1907b).  "New  Elements  of  Jupiter's  Seventh  Satellite"  Ast.  Nach.  174,  359- 
362. 

Sampson,  R.A.  (1910).  Tables  of  the  Four  Great  Satellites  of  Jupiter  (William  Wesley 
Son,  London). 

Sampson,  R.A.  (1921).  "Theory  of  the  Four  Great  Satellites  of  Jupiter"  Mem.  Roy.  Astron. 
Soc.  63,  1-270. 

Shampine,  L.F.  and  Gordon,  M.K.  (1975).  Computer  Solutions  of  Ordinary  Differential 

Equations  (W.H.  Freeman,  San  Francisco,  CA). 
Sinclair,  A.T.  (1974).  "A  Theory  of  the  Motion  of  Iapetus"  Mon.  Not.  Roy.  Astr.  Soc. 

169,  591-605. 

Sinclair,  A.T.  (1977).  "The  Orbits  of  Tethys,  Dione,  Rhea,  Titan  and  Iapetus"  Mon.  Not. 
Roy.  Astr.  Soc.  180,  447-459. 

Sinclair,  A.T.  (1978).  "The  Orbits  of  the  Satellites  of  Mars"  Vistas  in  Astron.  22,  133-140. 

Sinclair,  A.T.  (1989).  "The  Orbits  of  the  Satellites  of  Mars  Determined  from  Earth-based 
and  Spacecraft  Observations"  Astron.  Astrophys.  220,  321-328. 

Struve,  G.  "Neue  Untersuchungen  im  Saturnsystem"  Veroffentlichungen  der  Universitats- 
sternwarte  zu  Berlin- Babelsberg  6,  Parts  1,  4,  5.  (1924)  Part  1  Die  Bahn  von  Rhea 
1-16.  (1930)  Part  4  Die  Systeme  Mimas-Tethys  und  Enceladus- Dione  1-61.  (1933) 
Part  5  Die  Beobachtungen  der  ausseren  Trabanten  und  die  Bahnen  von  Titan  und 
Japetus  1-44. 

Struve,  H.  (1888).  "Beobachtungen  der  Saturnstrabanten"  Supplement  I  aux  Observations 
de  Poulkova  1-132. 


6  /  ORBITAL  EPHEMERIDES  AND  RINGS  OF  SATELLITES  381 

Struve,  H.  (1898).  "Beobachtungen  der  Saturnstrabanten"  Publications  de  VObservatoire 

Central  Nicolas,  Serie  II II,  1-337. 
Struve,  H.  (1903).  "Neue  Bestimmung  der  Libration  Mimas-Tethys"  Ast.  Nach.  162,  325- 

344. 

Struve,  H.  (1911).  "Uber  die  Lage  der  Marsachse  und  die  Konstanten  im  Marssystem" 
Sitzungsberichte  der  Koniglich  Preussischen  Askademie  der  Wissenschaften  fur  1911 
1056-1083. 

Struve,  H.  (1913).  "Bahnen  der  Uranustrabanten.  Abteilung  I:  Oberon  und  Titania"  Ab- 
handlungen  der  Konigich  Preussischen  Akademie  der  Wissenschaften 

Synnott,  S.P.  (1984).  "Orbits  of  the  Small  Inner  Satellites  of  Jupiter"  Icarus  58,  178-181. 

Taylor,  D.B.  (1984).  "A  Comparison  of  the  Theory  of  the  Motion  of  Hyperion  with  Ob- 
servations Made  During  1967-1982"  Astron.  Astrophys.  141,  151-158. 

Taylor,  D.B.  and  Shen,  K.X.  (1988).  "Analysis  of  Astrometric  Observations  from  1967  to 
1983  of  the  Major  Satellites  of  Saturn"  Astron.  Astrophys.  200,  269-278. 

Taylor,  S.W.  (1951).  "On  the  Shadow  of  Saturn  on  Its  Rings"  Astron.  J.  55,  229  230. 

Tholen,  D.J.  (1985).  "The  Orbit  of  Pluto's  Satellite"  Astron.  J.  90,  2353-2359. 

Todd  D.P.  (1876).  "A  Continuation  of  de  Damoiseau's  Tables  of  the  Satellites  of  Jupiter 
to  the  Year  1900"  (Washington  Bureau  of  Navigation,  Washington). 

Wargentin,  P.W.  (1746).  "Tabulae  pro  calculandis  eclipsibus  satellitum  Jovis"  in  Acta  Soc. 
reg.  sci.  Upsaliensis  ad  annum  1747  (Laurentii  Salvii,  Stockholm). 

Wilson,  R.H.,  Jr.  (1939).  "Revised  Orbit  and  Ephemeris  for  Jupiter  X"  P. A. S.P.  51,  241- 
242. 

van  Woerkom,  A.J.J.  (1950).  "The  Motion  of  Jupiter's  Fifth  Satellite,  1892-1949"  A.P.A.E. 
13,  1-77. 

Woltjer,  J.  (1928).  "The  Motion  of  Hyperion"  Annalen  van  de  Sterrewacht  te  Leiden  16, 
part  3,  1-139. 

Woolhouse,  W.S.B.  (1833).  "New  Tables  for  Computing  the  Occultations  of  Jupiter's 
Satellites  by  Jupiter,  the  Transits  of  the  Satellites  and  Their  Shadows  Over  the  Disc 
of  the  Planet,  and  the  Positions  of  the  Satellites  with  Respect  to  Jupiter  at  Any 
Time"  Nautical  Almanac  for  1835  Appendix,  1-39. 

Zadunaisky,  RE.  (1954).  "A  Determination  of  New  Elements  of  the  Orbit  of  Phoebe, 
Ninth  Satellite  of  Saturn"  Astron.  J.  59,  1-6. 


CHAPTER 


Physical  Ephemerides  of  the  Sun,  Moon, 

Planets,  and  Satellites 

by  James  L.  Hilton 


7.1  INTRODUCTION 

The  physical  ephemerides  of  the  Sun,  Moon,  planets,  and  satellites  give  information 
on  the  apparent  physical  aspects  of  the  disks  of  those  objects.  The  physical  ephem- 
erides are  used  for  making  and  reducing  observations  of  the  surface  markings  of  an 
object  and  for  determining  the  exact  center  of  an  object's  disk  from  observations 
of  the  limbs  of  the  object.  All  the  tabulated  values  are  geocentric  and  have  been 
corrected  for  the  effects  of  aberration.  Hence  the  information  tabulated  gives  the 
appearance  of  the  object  as  seen  from  the  geocenter  at  the  tabulated  time. 

In  general,  the  ephemerides  can  be  broken  into  two  groups:  (1)  information 
depending  on  the  disk  of  the  object  alone,  the  rotational  elements,  and  cartographic 
coordinates,  and  (2)  the  phase  and  magnitude  of  the  object,  which  depend  on  the 
position  of  the  Earth  and  Sun  relative  to  the  object  and  the  object's  physical 
appearance. 

Unless  otherwise  stated,  all  coordinates  given  in  this  chapter  refer  to  the  mean 
equator  and  equinox  of  J2000.0.  T  is  the  time  in  Julian  centuries  of  36525  days  from 
J2000.0,  and  t  is  the  time  in  days  (86400  SI  seconds)  from  J2000.0.  The  J2000.0 
coordinate  system  is  defined  by  the  FK5  star  catalog  and  has  the  standard  epoch 
of  2000  January  1.5  (JD  2452545.0),  TDB. 

7.1 1    Rotational  Elements  and  Cartographic  Coordinates 

The  cartographic  coordinates  of  an  object  consist  of  the  orientation  of  the  north 
Pole  and  the  position  of  the  prime  meridian  of  the  object  with  respect  to  an  inertial 
reference  frame.  These  elements  are  given  by  the  three  quantities:  ao,  6q,  an<J  W  ^ 
a  function  of  time.  These  parameters  are  shown  in  Figure  7.11.1. 

383 


384 


EXPLANATORY  SUPPLEMENT 


Figure  7.11.1 

The  position  of  the  north  pole  and  prime  meridian 
of  a  planet  in  Earth  equatorial  coordinates 

The  quantities  qq  and  <5o  are  the  right  ascension  and  declination  of  date  of  the 
object's  north  pole.  The  IAU  definition  of  the  north  pole  of  a  planet,  from  The  IAU 
Working  Group  on  Cartographic  Coordinates  and  Rotational  Elements  of  Planets 
and  Satellites  (Davies  et  al.,  1991),  is  the  rotation  axis  that  lies  on  the  north  side 
of  the  invariable  plane  of  the  solar  system,  an  and  <5n  may  vary  slowly  with  time 
because  of  the  precession  of  the  object  about  its  polar  axis.  In  the  absence  of  other 
information,  the  axis  of  rotation  is  assumed  to  be  normal  to  the  mean  orbital  plane. 
This  assumption  is  used  for  Mercury  and  most  of  the  satellites. 

The  angle  W  is  measured  along  the  object's  equator,  in  a  counterclockwise 
direction  when  viewed  from  the  north  pole,  from  the  ascending  node  of  the  object's 
equator  on  the  Earth's  mean  equator  of  J2000.0  to  the  point  where  the  prime 
meridian  of  the  object  crosses  its  equator.  The  right  ascension  of  the  node  (£?)  is  at 
6h+an,  and  the  inclination  of  the  object's  equator  to  the  standard  equator  is  90°  —  bo- 
Generally,  the  prime  meridian  is  assumed  to  rotate  uniformly  with  the  object,  hence 
W  varies  linearly  with  time.  For  objects  without  observable,  fixed  surface  features 
the  adopted  expression  for  W  defines  the  prime  meridian  and  is  not  subject  to 
correction.  However,  if  a  cartographic  position  for  the  prime  meridian  is  assigned 
to  an  object,  that  is,  if  the  position  of  the  prime  meridian  is  defined  by  a  suitable 
observable  surface  feature,  the  expression  for  W  is  chosen  so  that  the  ephetnens 
position  follows  the  motion  of  the  cartographic  position.  Although  the  definition  of 


7  i  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON.  PLANETS.  AND  SATELLITES  335 

the  ephemeris  prime  meridian  is  chosen  to  follow  the  cartographic  prime  meridian 
as  closely  as  possible,  there  may  be  errors  in  the  rotational  elements  of  the  object 
that  will  cause  the  cartographic  position  to  drift  away  from  the  ephemeris  position 
by  a  small  amount  AW.  The  angle  AW  is  measured  positively  counterclockwise 
from  the  ephemeris  position  of  W  as  viewed  from  above  the  north  pole.  For  a  prime 
meridian  that  has  a  cartographic  definition,  the  ephemeris  definition  of  W  may  be 
changed  as  more  accurate  information  on  the  motion  of  the  cartographic  prime 
meridian  is  obtained. 

The  definition  of  the  north  pole  requires  the  rotation  about  the  pole  to  be 
classified  as  either  direct  or  retrograde.  Direct  rotation  is  counterclockwise  as  viewed 
from  above  the  planet's  north  pole,  while  retrograde  rotation  is  clockwise.  For  a 
planet  with  direct  rotation  the  angle  W  increases  with  time.  For  most  of  the  satellites 
it  is  assumed  that  the  rotation  period  is  equal  to  the  mean  orbital  period. 

Information  on  the  point  defining  the  prime  meridian  and  pole  for  the  Sun  can 
be  found  in  Carrington  (1863)  and  Section  7.2  of  this  supplement.  The  definition 
for  the  prime  meridian  and  pole  of  each  planet  can  be  found  in  Davies  et  al.  (1991) 
and  Sections  7.41-7.48  of  this  supplement.  Information  defining  the  prime  meridian 
and  pole  of  the  primary  planetary  satellites  can  be  found  in  Davies  et  al.  (1991)  and 
Sections  7.3  and  7.51  through  7.56  of  this  supplement.  In  general,  the  expressions 
defining  aoi  <5oi  and  W  should  be  accurate  to  one  tenth  of  a  degree.  Two  decimal 
places  are  given,  however,  to  assure  consistency  when  changing  coordinate  systems. 
Zeros  are  added  to  the  rate  values  (W)  for  computational  consistency  and  are  not 
an  indication  of  significant  accuracy.  Three  significant  digits  beyond  the  decimal 
point  are  given  in  the  expressions  for  the  Moon  and  Mars,  reflecting  the  greater 
confidence  in  their  accuracy.  The  recommended  coordinate  system  for  the  Moon 
is  the  mean  Earth-polar  axis  system  in  contrast  to  the  principal  axis  system.  The 
Earth-polar  axis  system  uses  the  pole  of  rotation  of  the  Moon  and  the  mean  axis  of 
the  Moon,  which  points  toward  the  center  of  the  Earth.  The  principal  axis  system 
uses  the  axes  of  the  rotation  and  the  defined  0°  meridian  of  the  object. 

Both  planetocentric  and  planetographic  systems  of  coordinates  are  used  in  the 
study  of  the  planets  and  satellites.  Both  systems  are  based  on  the  same  fundamen- 
tal axis  of  rotation  but  differ,  as  explained  below,  in  their  definitions  of  latitude, 
longitude,  and  range.  Planetocentric  coordinates  are  used  for  general  purposes  and 
are  based  on  a  right-handed  system  of  axes  with  its  origin  at  the  center  of  mass  of 
the  object.  Planetographic  coordinates  are  used  for  cartographic  purposes  and  de- 
pend on  the  adoption  of  a  reference  surface,  usually  a  spheroid,  that  approximates 
an  equipotential  surface  of  the  object.  The  latitude  and  ranges  for  both  of  these 
coordinate  systems  are  shown  in  Figure  7.11.2. 

The  reference  surfaces  for  most  of  the  planets  are  spheroids  for  which  the  equa- 
torial radius,  a,  is  larger  than  the  polar  radius,  b  (see  Figure  7.11.2).  For  some  of 
tne  planets  and  most  of  the  satellites  the  reference  surface  is  a  sphere.  For  some 
satellites,  such  as  Phobos,  Deimos,  and  Hyperion,  the  reference  surface  should  be 


EXPLANATORY  SUPPLEMENT 


Planet's 
axis  of  rotation 


Figure  7.11.2 

Planetocentric  and  planetographic  coordinate  systems.  The  quantities  shown  are:  4>,  the 
planetocentric  latitude;  r,  the  distance  from  the  center  of  mass;  <f>'  the  planetographic  latitude;  and 
h,  the  height  of  a  point  above  or  below  [he  planetographic  reference  surface.  Also  included  are  o, 
the  equatorial  radius  of  the  object;  and  b,  the  polar  radius. 


triaxial.  Triaxial  ellipsoids  would  make  many  computations  more  complicated,  espe- 
cially those  related  to  map  projections.  Therefore,  spherical  or  spheroidal  reference 
surfaces  are  usually  used  in  mapping  programs.  The  polar  axis  for  each  reference 
surface  is  assumed  to  be  the  mean  axis  of  rotation  as  defined  by  the  adopted  ro- 
tational elements  since  the  present  accuracy  of  measurement  does  not  reveal  a 
deviation  between  the  axis  of  rotation  and  the  axis  of  figure  for  most  of  the  planets. 
The  radii  and  flattening  of  the  planets  are  found  in  The  Astronomical  Almanac  and 
in  Section  7.4  of  this  supplement.  The  mean  radii  of  the  natural  satellites  of  the 
planets  are  also  found  on  page  F3  of  The  Astronomical  Almanac. 

Many  small  bodies  in  the  solar  system  (satellites,  asteroids,  and  comet  nu- 
clei) have  very  irregular  shapes.  Sometimes  spherical  reference  surfaces  are  used 
to  preserve  projection  properties.  Orthographic  projections  are  often  adopted  for 
cartographic  purposes  because  they  preserve  the  irregular  appearance  of  the  body 
without  artificial  distortion. 

In  both  systems,  the  fundamental  reference  Z-axis  is  the  mean  axis  of  rotation 
with  the  positive  direction  being  toward  the  north  pole.  The  equator  is  the  plane, 
passing  through  the  center  of  mass  of  the  planet,  perpendicular  to  the  z-axis.  The 
JC-axis  is  defined  by  the  intersection  of  the  plane  of  the  equator  and  the  plane  con- 
taining the  prime  meridian.  The  choice  of  the  prime  meridian  is  arbitrary.  The 


7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN.  MOON,  PLANETS.  AND  SATELLITES  387 

y-axis  is  then  orthogonal  to  the  other  two  axes  and  makes  a  right-handed  coordi- 
nate system.  The  angular  coordinates  used  in  these  two  systems  are  latitude  and 
longitude.  The  range  of  the  planetocentric  coordinate  system  is  the  distance  from 
the  center  of  mass,  and  the  range  of  the  planetographic  system  is  the  height  above 
0r  below  the  reference  surface. 

Latitude  (see  Figure  7.11.2)  is  measured  north  and  south  of  the  equator  with 
the  northern  latitudes  being  designated  as  positive  and  the  southern  latitudes  as 
negative.  The  planetocentric  latitude  of  a  point  on  the  surface  of  a  planet  is  the 
angle  <j>  between  the  equatorial  plane  and  the  line  segment  connecting  the  point  to 
the  center  of  mass.  The  planetographic  latitude  of  a  point  is  the  angle  4>'  between 
the  line  segment  normal  to  the  equipotential  surface  from  the  point  in  question  to 
the  equatorial  plane.  Since  the  equipotential  surface  is  usually  a  spheroid,  the  shape 
of  the  spheroid  is  related  to  that  of  a  sphere  by  its  flattening,  /, 


f  =  (a-b)ia,  (7.11-1) 


where  a  is  the  equatorial  radius  of  the  object  and  b  is  the  polar  radius  of  the  object. 
For  a  spherical  object,  the  planetocentric  and  planetographic  latitudes  are  the  same. 

The  values  for  the  radii  of  the  planets  and  axes  given  in  Sections  7.41-7.48 
and  in  The  Astronomical  Almanac  are  derived  by  different  methods,  and  do  not 
always  refer  to  common  definitions.  Some  radii  use  star  or  spacecraft  occultation 
measurement,  some  use  limb  fitting,  and  some  use  control-network  computations. 
For  example,  the  spheroid  for  the  Earth  refers  to  mean  sea  level,  a  definition  that 
can  be  used  only  for  this  planet.  The  radii  and  axes  of  the  large  gaseous  planets, 
Jupiter,  Saturn,  Uranus,  and  Neptune  refer  to  a  one-bar  pressure  surface.  The  radii 
in  the  tables  are  not  necessarily  the  appropriate  values  to  be  used  in  dynamical 
studies;  the  radii  actually  used  to  derive  a  value  of  J%,  for  example,  should  always 
be  used  in  conjunction  with  that  value. 

Longitude  is  measured  along  the  equator  from  the  prime  meridian.  Planetocen- 
tric longitudes,  A,  are  measured  positively  in  the  counterclockwise  direction  when 
viewed  from  the  north  pole.  Planetographic  longitudes,  A',  are  measured  positively 
in  the  direction  opposite  to  the  rotation  of  the  object.  For  an  object  with  a  direct 
rotation,  the  planetographic  longitude  increases  in  the  clockwise  direction  when 
viewed  from  above  the  north  pole.  Planetocentric  longitudes  are  measured  from 
the  ephemeris  position  of  the  prime  meridian  as  defined  by  the  rotational  elements, 
but  the  planetographic  longitudes  are  measured  from  the  cartographic  position  of 
the  prime  meridian  as  defined  by  the  adopted  longitude  of  some  clearly  observable 
surface  feature.  For  the  Earth,  the  Sun,  and  the  Moon,  longitudes  are  measured 
from  0°  to  180°  east  and  west,  and  east  longitude  (counterclockwise  when  viewed 
from  above  the  north  pole)  is  commonly  considered  to  be  positive. 


388  EXPLANATORY  SUPPLEMENT 

In  the  planetographic  system,  a  point  P  not  on  the  reference  surface  is  specified 
by  the  planetographic  longitude  and  latitude  of  the  point  P'  on  the  reference  sur- 
face at  which  the  normal  line  segment  connecting  P  to  the  equatorial  plane  passes 
through  the  reference  surface  and  the  height  of  P  above  or  below  the  reference 
surface. 


7.12   Phases  and  Magnitudes 

The  tabulated  magnitude  of  an  object  is  the  integrated  total  visual  magnitude. 
The  magnitudes  for  the  planets  are  based  on  Harris  (1961).  The  magnitude  of  a 
planet  is  given  in  the  section  on  that  planet  in  this  chapter.  The  magnitudes  for 
the  brightest  asteroids  are  taken  from  Lumme  and  Bowell  (1981).  The  basis  for  the 
photometric  radii  of  the  asteroids  is  based  on  Lumme,  Karttunen,  Piironen,  and 
Bowell  (1986)  and  is  described  in  Section  7.6.  Rotation  rates  for  the  asteroids  are 
not  included  in  The  Astronomical  Almanac,  but  information  on  how  rotation  curves 
are  determined  can  be  found  in  Lumme,  Karttunen,  Bowell,  and  Poutanen  (1986), 
The  apparent  magnitude  of  an  object  is  a  function  of  its  distance  from  the  Sun, 
r,  its  distance  from  the  Earth,  d,  and  the  solar  phase  angle,  /  (see  Figure  7.12.1). 
The  solar  phase  angle  is  the  angular  distance  at  the  object  between  the  Sun  and 
the  Earth.  For  Mercury,  Venus,  and  the  Moon,  /  varies  from  0°  to  180°.  For  Mars 
and  its  satellites  /  can  be  as  large  as  47°.  For  the  rest  of  the  planets,  satellites,  and 
most  of  the  asteroids  i  reaches  only  a  few  degrees. 

Neglecting  variations  from  rotation  or  other  intrinsic  causes,  the  observed  mag- 
nitude for  an  object  is  given  by 

V  =  V(1,0)  +  5  log,0(rf)  +  Am(i),  (7.12-1) 

where  V(  1 , 0)  is  the  magnitude  of  the  planet  seen  at  a  distance  of  1 AU  with  a  phase 
angle  of  0°,  d  is  the  Earth-planet  distance  in  AUs,  and  Am(i)  is  the  correction  for 
the  variation  in  brilliancy  of  the  planet  with  phase  angle. 

The  quantity  Am(i)  is  measured  empirically.  It  is  the  result  of  two  effects.  The 
first  source  of  variation  arises  from  the  fraction  of  the  illuminated  disk  visible  from 
the  Earth  as  it  varies  with  /'.  The  second  effect  is  due  to  the  properties  of  diffuse 
reflection  from  the  object's  surface  and/or  atmosphere.  The  parameter  Am(0  's 
expressed  as  a  power  series  in  i,  retaining  as  many  terms  as  necessary  to  represent 
the  observations.  For  the  outer  planets  a  single  term  is  usually  sufficient,  hence 
Am(i)  is  usually  referred  to  as  the  phase  coefficient.  The  series  or  coefficients  for 
each  planet  and  the  Galilean  satellites  of  Jupiter  are  presented  in  Sections  7.4  and 
7.5. 

If  the  intrinsic  properties  of  a  planet  cause  its  brightness  to  vary,  the  problem 
of  predicting  the  apparent  magnitude  at  a  given  time  is  considerably  more  compli- 
cated. The  causes  of  intrinsic  variability  are  (1)  the  existence  of  surface  markings  on 


PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  389 


Kasic  wctots  and  the  angle  of  illumination.  These  quantities  affect  the  illumination 
of  a  planet  as  seen  from  the  Earth.  The  figure  is  drawn  in  the  Earth-Sun-planet  plane. 


the  planet,  and  (2)  changes  in  the  planet's  atmosphere  or  volatile  surface  markings 
such  as  Mars'  ice  caps.  The  surface  markings  on  an  object  give  rise  to  brightness 
variations  that  depend  on  the  rotation  of  the  object.  The  second  source  of  intrinsic 
variability  gives  rise  to  variations  of  an  irregular  nature.  The  atmospheric  varia- 
tions may  be  short-lived,  such  as  sand  storms  on  Mars,  or  persist  for  long  periods 
of  time,  such  as  the  Great  Red  Spot  on  Jupiter.  Because  the  atmospheric  variations 
change  erratically,  their  effects  on  a  planet's  albedo  cannot  be  predicted  with  great 
accuracy  although  some,  such  as  Mars'  ice  caps,  generally  follow  a  regular  cycle^ 

For  some  purposes  it  is  convenient  to  use  the  mean  opposition  magnitude,  V0, 
which  is  related  to  V(1,0)  by 

V()  =  V(l,0)  +  51og10[fl(fl-  1)1  (7.12-2) 

where  a  is  the  semi-major  axis  of  the  planet's  orbit  in  astronomical  units. 


390  EXPLANATORY  SUPPLEMENT 

The  surface  brightness  (SB)  of  an  object  is  the  average  brightness  value  for  the 
illuminated  portion  of  the  apparent  disk.  The  units  for  the  surface  brightness  are 
visual  magnitudes  per  square  arcsecond.  This  is  represented  mathematically  by 


SB  =V +2.5  logl0(k7iab'),  (7. 12-3) 

where  a  is  the  equatorial  radius  of  the  object,  b'  is  the  apparent  polar  radius  of 
the  object  that  will  be  given  in  equation  7.12-6,  and  k  is  the  fraction  of  the  object 
illuminated  that  will  be  given  in  Equation  7.12-32. 

The  apparent  disk  of  an  object  is  always  an  ellipse.  The  apparent  flattening 
is  always  less  than  or  equal  to  the  flattening  of  the  object  itself  (depending  on 
the  apparent  tilt  of  the  objects  axis).  To  derive  the  apparent  polar  radius  and  the 
apparent  flattening  of  an  object,  start  with  the  equation  for  an  ellipse.  The  ellipse 
can  be  represented  parametric  ally  by 

r={x2+y1)m, 

*  =  acos7,  (7.12-4) 
y  =  b  sin  7, 


where  x  is  the  length  of  the  projection  of  the  point  along  the  major  axis  from  the 
center  of  the  ellipse,  y  is  the  length  of  the  projection  of  the  point  along  the  minor 
axis  from  the  center,  a  is  the  length  of  the  major  axis,  b  is  the  length  of  the  minor 
axis,  and  7  is  the  angle  between  the  line  segment  connecting  the  point  with  the 
center  of  the  ellipse  and  the  semi-major  axis  (see  Figure  7.12.2).  For  a  planet,  the 
apparent  polar  radius  is  the  length  of  the  radius,  R,  whose  planetocentric  latitude 
is  the  same  as  the  planetocentric  colatitude  of  the  sub-Earth  point,  and  7  is  the 
latitude  of  the  sub-Earth  point.  Using  the  definitions  for  x  and  y  in  the  equation 
for  R 

R  =  (a2  cos2  7  +  b2  sin2  7)1/2.  (7.12-5) 


Rearranging  the  definition  for  flattening,  Equation  7.11-1,  gives 


b  =  a(\  -/). 


(7.12-6) 


So 


R  -  (a2  cos2  7  +  a2(l  -  f)2  sin2  T)1/2 
=  a(cos2  7  +  sin2  7-2/  sin2  7  +  f  sin2  7) 1/2 
=  a(l  -  2/  sin2  7  +  f  sin2  7) 1/2 .  (7.12-7) 


PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES 


391 


Figure  7.12.2 

The  geometric  appearance  of  the  apparent  polar  radius,  b' 


Using  the  binomial  expansion: 


y  =  fl[l  -  \(2f  sin2  j-fi  sin2  7)  +  5(2/ sin2  7  -  f  sin2 1)2  -  ■■■].  (7.12-8) 
2  o 

However,  for  the  planets  /  <C  1,  so  terms  of  order  f  or  larger  will  be  negligible, 
and 


R  =  a{  1  -  /  sin2  7) 
=  a(l  -  /cos2  8) 
=  fl{l -/[(// -b)/(|f/||b|)]2}, 


(7.12-9) 


where  b'  is  the  vector  from  the  planetocenter  to  the  apparent  polar  axis,  b  is  the 
vector  from  the  planetocenter  to  the  true  polar  axis,  and  9  is  the  planetocentric 
colatitude  of  b' .  The  apparent  flattening  of  the  planet  will  then  be 


f  =  (a-b')la. 


(7.12-10) 


The  remaining  tabulated  quantities  are  most  easily  understood  from  Figure  7.12.3, 
which  shows  the  apparent  disk  of  an  object  as  it  is  seen  from  the  Earth.  At  the  cen- 
ter of  the  apparent  disk  is  the  sub-Earth  point,  e.  Other  points  of  reference  are  the 


392 

North 


EXPLANATORY  SUPPLEMENT 


South 


Figure  7.12.3 

The  disk  of  a  planet  as  seen  by  an  observer  on  the  Earth.  The  quantities  shown  are:  e,  the  sub-Earth 
point;  s,  the  subsolar  point;  ds  the  apparent  distance  from  the  sub-Earth  point  to  the  subsolar  point; 
PA,  the  position  angle  of  the  subsolar  point;  n,  the  north  pole  of  the  planet;  dn  the  apparent  distance 
from  the  north  pole  from  the  sub-Earth  point;  PA„,  the  position  of  the  north  pole;  and  Q,  the 
geometric  maximum  defect  of  illumination. 


subsolar  point,  s,  and  the  north  pole,  n.  For  most  of  the  planets,  the  planetographic 
longitude  and  latitude  of  the  points  e  and  s  are  tabulated.  The  apparent  positions 
of  the  subsolar  point,  s,  and  the  north  pole,  n,  with  respect  to  the  apparent  center 
of  the  disk  (point  e)  are  tabulated  by  the  apparent  distances,  dn  and  ds,  and  posi- 
tion angles,  PA„  and  PAS  for  n  and  s,  respectively.  The  position  angle  is  measured 
eastward  from  north,  N,  on  the  celestial  sphere.  The  direction  north  being  denned 
by  the  great  circle  on  the  celestial  sphere  passing  through  the  center  of  the  object's 
apparent  disk  and  the  true  celestial  north  pole  of  date.  The  apparent  distance  of 
a  tabulated  point  is  listed  as  positive  if  the  point  lies  on  the  visible  hemisphere  of 
the  object  and  negative  if  the  point  is  on  the  far  side  of  the  object.  Thus,  as  point 
n  or  j  passes  from  the  visible  hemisphere  to  the  far  side,  or  vice  versa,  the  sign  of 
the  distance  changes  abruptly,  but  the  position  angle  varies  continuously.  However, 
when  the  point  passes  close  to  the  center  of  the  disk,  the  sign  of  the  distance  re- 
mains unchanged,  but  both  the  distance  and  position  angle  may  vary  rapidly  and 
may  appear  to  be  discontinuous  in  the  fixed  interval  tabulations. 

The  planetographic  coordinates  of  the  sub-Earth  and  subsolar  points  are  calcu- 
lated in  the  following  manner.  First,  the  planetary  ephemerides  are  used  to  calculate 


?  j  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  393 

the  heliocentric  ecliptic  rectangular  coordinates  for  the  planet,  r  =  (x,y,z),  and  the 
Earth,  re  =  (*e,ye,Ze)  at  a  given  Terrestrial  Julian  Date  (TJD).  The  vector  from  the 
Earth  to  the  object  is  then  determined  by  subtracting  re  from  r; 

d  =  r  -  re 

=  (x-xe,y-ye,z-  Ze) 

=  (*a,ya,3i).  (7.12-11) 


Next,  the  light-time  correction  is  found  by  determining  the  length  of  d  and  dividing 
by  the  speed  of  light,  c,  to  obtain  the  time: 

|d|  =  (d-d)"2  =  (^+^  +  ^)1/2> 
f=|d|/c.  (7.12-12) 


The  difference  TJD  —  t  is  calculated  to  approximate  the  time  at  which  the  image 
of  the  planet  visible  at  the  Earth  at  TJD  left  the  planet.  This  time,  TJD  —  t,  is  used 
to  determine  the  approximate  position  of  the  planet,  T\  -  (x\,y\,zi),  as  seen  from 
the  Earth  at  time  TJD.  If  desired,  the  previous  process  can  be  iterated  to  produce 
a  more  accurate  planetary  position;  however,  planetary  motions  are  slow  enough 
that  to  the  accuracy  of  The  Astronomical  Almanac  only  one  iteration  is  required. 
The  position  of  the  Earth,  re,  and  the  apparent  position  of  the  planet,  t\t  are 
then  transformed  from  the  mean  equator  and  ecliptic  of  J2000.0  to  the  equator 
and  ecliptic  of  date  using  the  precession  routines  described  in  Section  3.21  and  the 
nutation  routines  described  in  Section  3.22.  The  precessed  and  nutated  position 
vectors  are  designated  red  for  the  Earth  and  rd  for  the  planet.  A  new  vector  d  is 
computed  by  subtracting  rd  from  red  as  in  Equation  7.12-11  and  then  correcting  for 
aberration  in  position  given  in  Section  3.25.  The  unit  vector  along  the  planet-Sun 
line,  j,  is  a  vector  of  unit  length  denoting  the  direction  of  the  Sun  from  the  planet. 
The  vector  j  is  found  by  dividing  -rd  by  its  length,  |rd|.  The  unit  vector  along  the 
planet-Earth  line,  jd,  is  found  in  a  similar  manner. 

The  position  of  the  north  pole  of  the  planet,  (a0,  <5n),  is  then  found  from  Davies 
et  al.  (1991).  These  coordinates  are  then  precessed  and  nutated  to  the  ecliptic  and 
equinox  of  date,  (ad,  6d).  A  unit  vector,  n,  in  the  ecliptic  rectangular  coordinates 
is  then  calculated: 

n  =  (cos6dcosad,cos<5dsinad,sini5d).  (7.12-13) 


This  vector  gives  the  planetocentric  direction  of  the  north  pole  of  the  planet  in  the 
coordinates  of  the  equator  and  ecliptic  of  date. 

Finally,  the  ecliptic  rectangular  coordinates  of  the  unit  vector  pointing  from  the 
Planet's  center  to  the  intersection  of  the  planet's  prime  meridian  and  the  equator, 


394 


EXPLANATORY  SUPPLEMENT 


Figure  7.12.4 

Planetocentric  unit  vectors  for  points  of  interest  on  the  disk  of  the  planet,  and  the  angles  between  the 
Earth's  equator  of  J2000.0  and  the  planet's  equator  of  date.  The  quantities  depicted  are:  n,  the  north 
pole  of  the  planet;  n,  the  north  pole  of  the  Earth's  equator  and  equinox  of  J2000.0;  fi,  the 
planetocentric  unit  vector  for  the  north  pole;  s,  the  subsolar  point;  j,  the  planetocentric  unit  vector  for 
the  subsolar  point;  ja,  the  planetocentric  unit  vector  for  the  sub-Earth  point;  U,  the  planetocentric  unit 
vector  pointing  to  the  intersection  of  the  object's  prime  meridian  and  its  equator;  W,  the  angle  along 
the  object's  equator  from  the  ascending  node  on  the  Earth's  equator  of  date  to  the  object's  prime 
meridian;  g,  the  angle  along  the  great  circle  from  the  Earth's  equator  of  J2000.0  to  the  Earth's  north 
pole  of  J2000.0,  which  goes  from  the  Earth's  equator  to  the  intersection  of  the  planet's  prime  meridian 
and  its  equator  of  date;  and,  S,  the  angle  along  the  Earth's  equator  from  the  ascending  node  of  the 
planet's  equator  to  the  point  where  the  angle  g  reaches  the  equator.  The  planetocentric  unit  vector  for 
the  sub-Earth  point,  jd  points  directly  at  the  observer. 


r ,  is  needed.  To  obtain  this  vector,  first  determine  the  intermediate  angles  g  and  S 
(Figure  7.12.4): 

sing-sinWcos^,  (7.12-14) 
sin  S  =  sin  W  sin  Sd  I  cos  g,  (7,12-15) 
cos  S  =  cos  W !  cos  g.  (7.12-16) 


7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  395 

Since  g  runs  from  +90°  to  —90°  (see  Figure  7.12.3),  there  is  no  loss  of  generality  in 
not  directly  determining  cosg.  The  right  ascension  and  decimation  of  U  are  then 


ctu  =  ad  +  90°  +  tan_1(sinS/cosS),  (7.12-17) 
6V  =  tan" 1  (sing  /cos  g).  (7.12-18) 

The  coordinates  for  the  sub-Earth  and  subsolar  points  are  then  computed  by  using 
the  vectors  for  the  north  pole  of  the  planet  and  U  to  determine  the  rotation  from 
the  equatorial  ecliptic  coordinate  system  to  give  the  planetocentric  latitude  and 
the  planetographic  longitude.  (The  planetographic  longitude  is  supplied  from  the 
definition  of  W,  and  the  planetocentric  latitude  is  determined  because  the  angles  are 
measured  with  respect  to  the  axes  of  the  coordinate  system  at  the  center  of  mass 
of  the  planet  and  not  the  local  normal  on  the  equipotential  surface.)  The  flattening 
of  the  planet,  f,  is  used  to  convert  the  planetocentric  latitude  to  the  planetographic 
latitude.  Using  n  as  the  £-axis,  U  as  the  *-axis,  and  defining  y  as  the  y-axis  of  the 
coordinate  system, 

y  =  Uxn.  (7.12-19) 
The  unit  vector  for  the  sub-Earth  point  is 

jd  =  (jd-U,  jd-yJd-n).  (7.12-20) 

The  vector,  jd  =  (jdxjdyjdz)  is  converted  into  the  latitude  and  longitude  of  the 
sub-Earth  point: 


t>e  -  sin 


< -tan"1  [tan  ^/(l  -  f)\  (7.12-22) 
A^tan-^dj/jd*).  (7.12-23) 

The  planetographic  latitude  and  longitude  of  the  subsolar  point  are  found  by 
using  the  unit  vector  for  the  Sun,  j,  instead  of  the  sub-Earth  point  unit  vector,  jd, 
the  unit  vector  for  the  Earth,  in  Equations  7,12-20  through  7.12-23. 

The  position  angle  and  apparent  distance  for  the  subsolar  point  and  north  pole 
are  computed  by  determining  the  vectors  specifying  a  coordinate  system  in  which 
the  yz-plane  is  the  plane  of  the  sky,  the  jr-axis  points  toward  the  Earth,  and  the 
>axis  points  toward  the  west  as  seen  on  the  plane  of  the  sky.  In  the  equatorial 
coordinates  of  date,  the  direction  for  the  north  pole  of  the  Earth  is  j„  =  (0,0, 1).  So 


"3QR 

EXPLANATORY  SUPPLEMENT 

the  directions  for  axes,  (h„  Uj,  uk),  of  the  coordinate  system  in  the  ecliptic  coordinate 
of  date  are 


Jt-axis,  u,=jd;  (7.12-24) 
y-axis,  Uj=jdxj„;  (7.12-25) 
z-axis,       Ui  =  ajx}i.  (7.12-26) 

The  coordinates  for  the  north  pole  vector  in  the  preceding  coordinate  system  are 
found  from  the  equatorial  coordinates  by 

nH  =  Pp(n  ■  u„  n  ■  uh  n  -  u*),  (7. 12-27) 

where  pp  is  the  polar  diameter  of  the  planet  and  ft  is  the  unit  vector  pointing  in  the 
direction  of  the  north  pole  found  in  Equation  7.12-13.  The  position  angle  of  the 
north  pole  is  then 

PA„  =  tan- 1  (nuy  I  «„,).  (7.  j  2_28) 

The  length  of  the  projection  from  the  center  of  mass  to  the  north  pole  on  the  planet 
is 

d  =  (n2la  +  nlz)m.  (7.12-29) 
Finally,  the  apparent  distance  in  arcseconds  is 

dn  =  206264. 8062[a7  (|d|  -  (7. 12-30) 

Similarly,  the  position  angle  and  apparent  distance  of  the  subsolar  point  is 
calculated  using  the  unit  vector  for  the  Sun,  j,  and  the  apparent  radius  of  the 
planet  at  the  latitude  of  the  subsolar  point  rather  than  n  and  the  apparent  polar 
radius.  The  apparent  radius  of  the  planet  at  the  subsolar  point  is  derived  using 
Equation  7.12-9  and  substituting  the  planetocentric  latitude  of  the  subsolar  point, 

The  phase  angle,  j,  of  a  planet  is  the  planetocentric  elongation  of  the  Earth 
from  the  Sun.  This  can  be  found  from  the  dot  product  of  j  and  jd: 

cosi'  =  j-jd.  (7.12-31) 

The  phase,  k,  is  the  ratio  of  the  illuminated  area  of  the  disk  to  the  total  area  of  the 
disk,  as  seen  from  the  Earth: 


k  =  0.5(1  +COS/'). 


(7.12-32) 


7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN.  MOON,  PLANETS.  AND  SATELLITES 


397 


The  geometric  terminator  is  used  in  computing  the  phase  and  the  defect  of 
illumination.  The  geometric  terminator  is  the  plane  orthogonal  to  the  direction  of 
the  Sun  passing  through  the  center  of  mass  of  the  object  (see  Figure  7.12.1).  The 
maximum  geometric  defect  of  illumination,  Q,  is  the  length  of  the  portion  of  the 
line  segment  across  the  face  of  the  planet  passing  through  the  points  s  and  e  that 
is  not  illuminated  (see  Figure  7.12.3).  The  defect  calculated  does  not  include  non- 
geometric  effects  such  as  the  refraction  of  light  by  the  planet's  atmosphere.  The 
apparent  equatorial  diameter  of  the  planet  in  seconds  of  arc  is 

jeq  =  206264.  8062a  /  |d|  (7. 1 2-33) 

The  ratio  of  the  apparent  polar  diameter  to  the  equatorial  diameter  that  depends 
on  the  latitude  of  the  sub-Earth  point  (see  Figure  7.12.2) 

b'la=  1  -/(l  -sin2 7),  (7.12-34) 

where  /  is  the  flattening  of  the  planet  and  7  is  the  latitude  of  the  sub-Earth  point. 
The  defect  of  illumination  is  t  hen 

!2  =  2seq[l  -(1  -b't  a)  sin2(PAs  -  fi4„  +  90o)](l  -*).  (7.12-35) 

The  position  angle  for  the  defect  of  illumination,  measured  from  celestial  north, 

is: 

PAQ  =  PAs+\m°        PAS  <  1 80°, 

■  PAS  -  180°       PAS  >  180?  (7.12-36) 


7.2    PHYSICAL  EPHEMERIS  OF  THE  SUN 

The  elements  used  to  calculate  the  physical  ephemeris  of  the  Sun  are  from  Carring- 
ton  (1863).  The  values  of  the  physical  constants  for  the  ephemeris  are: 

(1)  mean  sidereal  period  of  rotation,  Ps  =  25. 38  days; 

(2)  inclination  of  solar  equator  to  the  ecliptic,  /  =  7?25; 

(3)  longitude  of  the  ascending  node  of  the  solar  equator  on  the  ecliptic, 
/?  =  75?76  +  0?01397  7;; 

(4)  the  equatorial  diameter  of  the  Sun,  ds  =  696000  km. 

The  flattening  of  the  Sun  is  thought  to  be  extremely  small  (/  =  0).  Because  the 
Sun  is  a  gaseous  body,  it  does  not  rotate  rigidly.  The  sidereal  period  given  is  for 
the  moan  rotation  rate  of  the  Sun. 


398  EXPLANATORY  SUPPLEMENT 

From  the  inclination  of  the  Sun  and  the  longitude  of  the  ascending  node,  the 
position  of  the  north  pole  of  the  Sun  is 

on  =  286?1300,«S0  =  63?8700.  (7.2-1) 
From  the  mean  sidereal  period  of  the  Sun,  the  position  of  the  prime  meridian  is 

W  =  84?  10  +  14?  1 844000 1.  (7.2-2) 

The  heliocentric  longitude  and  latitude  of  the  Earth,  the  sub-Earth  point,  and 
the  position  angle  of  the  north  pole  are  determined  from  the  heliocentric  position 
of  the  Earth,  re,  the  positions  of  the  north  pole,  c*o,  So,  and  the  prime  meridian 
of  the  Sun,  IV.  These  quantities  are  determined  using  the  methods  described  in 
Section  7.12. 

The  horizontal  parallax  is  the  difference  in  direction  between  the  topocentric 
and  the  geocentric  coordinates  of  an  object  when  the  center  of  the  object  is  on 
the  astronomical  horizon.  The  horizontal  parallax  (HP),  in  arcseconds,  is  computed 
using 

sinffP  =  /?e  /  |re|,  (7.2-3) 

where  Re  =  6378. 137  km,  the  IAU  equatorial  radius  of  the  Earth  (Davies  et  ai, 
1991)  and  re  is  the  Earth-Sun  distance. 

Similarly,  the  semidiameter  (SD)  of  the  Sun  in  arcseconds  is  computed  using 

SD  =  206264"8062  ds/2\re\,  (7.2-4) 

where  ds  is  the  diameter  of  the  Sun.  The  semidiameter  is  then  converted  from 
arcseconds  to  arcminutes  and  seconds. 


7.3    PHYSICAL  EPHEMERIS  OF  THE  MOON 

In  The  Astronomical  Almanac  data  for  the  Moon  is  tabulated  to  an  accuracy  of 
0?001  in  longitude,  latitude,  and  position  angle. 

On  the  average,  the  same  hemisphere  of  the  Moon  is  always  turned  toward  the 
Earth,  but  there  are  periodic  oscillations  or  librations  of  the  apparent  position  of 
the  lunar  surface  that  allows  about  59%  of  the  surface  to  be  seen  from  the  Earth. 
The  librations  are  due  partly  to  physical  rotational  librations — oscillations  of  the 
actual  rate  of  rotation  of  the  Moon  with  respect  to  its  mean  rotation  rate.  A  second, 
much  larger  part  of  the  librations  are  the  geocentric  optical  librations,  which  are 
the  result  of  the  nonuniform  motion  of  revolution  of  the  Moon  around  the  Earth- 
Moon  barycenter.  Both  of  these  effects  are  taken  into  account  in  the  computation 


7  /  PHYSICAL  EPHEMEHIDES  OF  THE  SUN,  MOON,  PLANETS.  AND  SATELLITES  399 

of  the  Earth's  selenographic  longitude,  Am,  and  latitude,  (3m,  and  of  the  position 
angle,  C,  of  the  axis  of  rotation.  In  The  Astronomical  Almanac,  the  contributions 
from  the  physical  librations  are  tabulated  separately.  A  third  contribution  to  the 
librations,  the  topocentric  optical  librations,  are  a  result  of  the  difference  between 
the  viewpoints  of  an  observer  on  the  surface  of  the  Earth  and  the  hypothetical  ob- 
server at  the  center  of  mass  of  the  Earth.  The  topocentric  optical  librations  may  be 
as  large  as  1°  and  have  important  effects  on  the  apparent  contour  of  the  limb.  Be- 
cause the  magnitude  of  the  topocentric  optical  librations  depend  on  the  observer's 
position,  they  are  not  tabulated  in  The  Astronomical  Almanac.  Instead,  a  method 
for  estimating  them  is  given  at  the  end  of  this  section  and  in  The  Astronomical  Al- 
manac. The  Multiyear  Interactive  Computer  Almanac  (MICA),  however,  computes 
the  topocentric  optical  librations  from  rigorous  formulas.  The  difference  between 
MICA  and  the  given  method  for  estimating  the  topocentric  optical  librations  is,  at 
most,  1". 

The  selenographic  coordinates  of  the  Earth  and  Sun  specify  the  point  on  the 
lunar  surface  where  the  Earth  and  the  Sun,  respectively,  are  in  the  selenographic 
zenith.  The  tabulated  selenographic  longitude  and  latitude  of  the  Earth  include  the 
total  geocentric,  optical,  and  physical  librations  in  longitude  and  latitude,  respec- 
tively. When  the  libration  in  selenographic  longitude  of  the  Earth  is  positive,  the 
mean  center  of  the  disk  is  displaced  eastward  on  the  celestial  sphere,  exposing  to 
view  a  region  of  the  western  limb.  When  the  libration  in  selenographic  latitude  of 
the  Earth  is  positive,  the  mean  center  of  the  disk  is  displaced  toward  the  south, 
and  a  region  of  the  north  limb  is  exposed  to  view. 

The  principal  moment  of  inertia  of  the  Moon  closest  to  the  Earth-Moon  axis 
is  offset  214V2  west  of  the  mean  direction  of  the  Earth  from  the  Moon. 

The  selenographic  colongitude  of  the  Sun  tabulated  in  The  Astronomical  Al- 
manac is  the  east  selenographic  longitude  of  the  morning  geometric  terminator.  It 
is  determined  by  subtracting  the  selenographic  longitude  of  the  Sun  from  90°  and 
adding  360°  if  the  result  is  negative.  Colongitudes  of  270°,  0°,  90°,  and  180°  corre- 
spond, approximately,  to  New  Moon,  First  Quarter,  Full  Moon,  and  Last  Quarter, 
respectively.  The  age  of  the  Moon  is  computed  as  the  time  elapsed,  in  days,  since 
the  most  recent  moment  at  which  the  selenographic  colongitude  of  the  Sun  was 
270°. 

The  position  angle  of  the  midpoint  of  the  bright  limb  is  the  same  as  the  position 
angle  of  the  subsolar  point,  and  it  is  computed  in  the  manner  described  for  the 
subsolar  point  in  Section  7.12.  Like  the  other  position  angles,  the  position  angle  of 
the  midpoint  of  the  bright  limb  is  measured  eastward  around  the  disk  from  north. 

The  fraction  of  the  Moon  illuminated,  k,  is  the  same  as  the  phase.  This  quantity 
is  computed  as  described  in  Section  7.1.2. 

The  analytic  theory  for  the  libration  of  the  Moon  used  in  The  Astronomical 
Almanac  is  that  of  Eckhardt  (1981,  1982)  for  the  physical  libration  of  the  Moon; 
however,  the  IAU  value  for  the  inclination  of  the  mean  lunar  equator  to  the  ecliptic, 


400  EXPLANATORY  SUPPLEMENT 

1°32'32!'7,  is  used  instead  of  Eckhardt's  value.  In  addition,  there  are  printing  errors 
in  Eckhardt's  published  values,  so  any  attempt  to  use  the  theory  must  be  done  with 
great  care.  Although  the  values  of  Eckhardt's  constants  differ  slightly  from  those 
of  the  IAU,  the  difference  is  of  no  consequence  for  the  precision  of  the  tabulation 
except  for  the  inclination  of  the  lunar  equator.  First,  the  geocentric  optical  librations 
are  calculated  from  rigorous  formulas;  then,  the  combined  geocentric  optical  and 
physical  librations  are  calculated  using  the  results  from  the  optical  librations  alone 
Included  in  the  calculations  are  perturbations  for  all  terms  greater  than  0?000l 
Since  the  apparent  positions  of  the  Sun  and  Moon  are  used  in  the  calculations 
aberration  is  already  included,  except  for  the  inappreciable  difference  between  the 
light-time  from  the  Sun  to  the  Moon  and  from  the  Sun  to  the  Earth. 

The  differential  corrections  to  be  applied  to  the  tabular  geocentric  librations 
to  form  the  topocentric  librations  are  derived  in  Atkinson  (1951).  The  formulas  for 
the  topocentric  corrections  are 

A  Am  =  -  HP'  sin(g  -  Q  sec  b,  (7.3-1 ) 

AAn  =  +  HP'  cos(G  -  Q,  (7.3-2) 
AC  =  +  sin03  +  A0)l  -  HP1  sin  Q  tan  6,  (7.3-3) 

where  Am  is  the  selenographic  longitude,  /3m  is  the  selenographic  latitude,  C  is  the 
position  angle  of  the  axis  of  rotation,  Q  is  the  geocentric  parallactic  angle  subtended 
by  the  Moon,  and  HP'  is  the  parallax  between  the  point  of  observation  on  the  Earth's 
surface  and  the  geocenter  commonly  called  the  topocentric  horizontal  parallax. 

The  horizontal  parallax,  HP,  occasionally  called  the  geocentric  horizontal  par- 
allax, is  found  from  the  Earth-Moon  distance,  |rm|,  and  the  equatorial  radius  of  the 
Earth,  /?e  =  6378. 137  km. 

sinHP=\rm\/Re.  (7.3-4) 

The  topocentric  parallax,  HP',  is  computed  from  the  horizontal  parallax  by 
using 

sin  HP'  =  sin  z  sin  HP  /( 1  -  sin  z  sin  HP),  (7.3-5) 


where  z  is  the  geocentric  zenith  angle  of  the  Moon.  The  values  of  Q  and  z  are 
calculated  from  the  geocentric  right  ascension,  am,  and  declination,  6m,  of  the  Moon, 
using 

sin  z  sin  Q  =  cos  $  sin  h,  (7.3-6) 
sin  z  cos  Q  =  cos<5m  sin#  —  sin  6m  cos  $  cos  h,  (7.3-7) 
cos  z  =  sin  bm  sin  <£  +  cos  6m  cos  $  cos  h,  (7.3-8 ) 


j  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN.  MOON.  PLANETS,  AND  SATELLITES  401 

where  <P  is  the  geocentric  latitude  of  the  observer  and  h  is  the  local  hour  angle  of 
the  Moon,  given  by 

h  -  LST  —  am,  (7.3-9) 

where  LST  is  the  apparent  local  sidereal  time. 

Second  differences  must  be  taken  into  account  in  the  interpolation  of  the  tabular 
geocentric  librations  to  the  time  of  observation. 

The  semidiameter  of  the  Moon  in  radians  is  simply, 

SD  =  tan-,(«m/|rm|)  (7.3-10) 
where  Rm  =  1738  km  the  radius  of  the  moon  and  |rm|  is  the  Earth  Moon  distance. 

7,4    PHYSICAL  EPHEMERIDES  OF  THE  PLANETS 

In  The  Astronomical  Almanac,  the  planets  Mars,  Jupiter,  Saturn,  Uranus,  Neptune, 
Pluto,  and  all  of  the  planets  in  MICA  have  a  tabulated  element  in  their  physical 
ephemerides  in  addition  to  the  quantities  described  in  Section  7.1.  This  quantity 
is  the  planetocentric  orbital  longitude  of  the  Sun  (Ls).  Ls  is  measured  eastward  in 
the  planet's  orbital  plane  from  its  vernal  equinox.  The  planet's  vernal  equinox  is 
the  point  where  the  ascending  node  of  the  planet's  equator  crosses  the  plane  of  its 
orbit  about  the  Sun.  The  instantaneous  orbital  and  equatorial  planes  are  used  in 
computing  Ls- 

Ls  =  cos-'[(rp  •  rve)/  (|rp||rve|)],  (7.4-1) 

where  rp  are  the  ecliptic  rectangular  coordinates  of  the  planet  and  rve  are  the  ecliptic 
rectangular  coordinates  of  the  planet's  instantaneous  vernal  equinox.  The  correct 
quadrant  is  determined  from  the  sign  of 


rpxrve.  (7.4-2) 

Values  of  Ls  of  0°,  90°,  180°,  and  270°  correspond  to  the  beginning  of  spring, 
summer,  autumn,  and  winter,  respectively,  for  the  planet's  northern  hemisphere. 

Unless  otherwise  noted  the  positions  of  the  planetary  poles  and  the  prime  merid- 
ians and  the  planetary  radii  and  flattenings  are  taken  from  Davies  et  al.  (1991). 
The  values  for  the  magnitude  of  the  planets  at  a  distance  of  1  AU  and  at  a  phase 
angle  of  0°,  as  well  as  the  value  for  the  phase  coefficient  are  from  Harris  (1961). 


7.41  Mercury 

The  position  for  Mercury's  pole,  prime  meridian,  radius,  V(1,0),  phase  coefficient  , 
and  flattening  are  given  in  Table  7.41.1. 


402 


EXPLANATORY  SUPPLEMENT 


Table  7.41,1 

Physical  Ephemeris  Parameters  for  Mercury 


=  281?01  -0?033  T 

=  61?45  -  OP005  T 

w 

=  329?  71  +  6?  1 385025  f 

Am(i) 

=  3.80 (// 100°)  -  2,73(/7 100°)2  +  2.00(/7  100°)3 

V<1,0) 

=  -0.36 

R 

=  2439.7+  1.0  km 

f 

=  0 

Since  Mercury's  orbit  about  the  Sun  is  interior  to  the  orbit  of  the  Earth,  Mer- 
cury is  seen  to  go  through  the  entire  range  of  phase  angles.  Because  it  passes  through 
such  a  large  range  in  phase  angle,  the  phase  coefficient  must  be  replaced  by  an  an- 
alytic expression  (Danjon,  1954).  The  expression  for  the  phase  coefficient  is  good 
for  the  phase  angle  3°  <  i  <  123°.  For  i  <  3°  and  i  >  123°,  Mercury  is  too  close  to 
the  Sun  to  be  observed  photometrically. 

The  flattening  is  not  appreciable  so  the  equatorial  and  polar  diameters  are  the 
same. 

The  cartographic  prime  meridian  of  Mercury  is  defined  so  that  the  20°  meridian 
passes  through  the  center  of  the  crater  Hun  Kal. 


7.42  Venus 

The  basic  parameters  for  Venus  are  given  in  Table  7.42.1 

Venus  rotates  in  a  retrograde  fashion,  so  the  sign  for  the  motion  of  the  prime 
meridian  is  negative.  Like  Mercury,  the  flattening  of  Venus  is  negligible;  so  the 
equatorial  and  polar  radii  of  Venus  are  the  same. 

Also,  like  Mercury,  Venus'  orbit  is  interior  to  the  Earth's  orbit,  so  it  has  a  phase 
angle  that  varies  from  0°  to  180°,  and  so  an  analytical  function  is  used  rather  than 


Table  7.42.1 

Physical  Ephemeris  Parameters  for  Venus 


a0  =  272?72 
60  =  67?  15 

W  =  160?26  -  1?4813596  f 
1/(1,0)  =  -4.29 

Am(i)  =  0. 09(/  / 1 00° )  +  2. 39 (/  /  1 00°  )2  -  0. 65(/  / 1 00°  )3 
fl  =  6501.9  ±  1.0km 
/  =  0 


7  i  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  403 

a  single  phase  coefficient  (Danjon,  1949).  The  expression  was  determined  for  the 
phase  range  0?9  <  i  <  170P7.  For  r  <  0?9  and  i  >  170?7,  Venus  is  too  close  to  the 
Sun  to  be  observed  photometrically.  Venus'  change  in  brilliancy  with  rotation  is 
very  small. 

7,43  Mars 

The  basic  parameters  for  Mars  are  given  in  Table  7.43.1. 


Table  7.43.1 

Physical  Ephemeris  Parameters  for 
Mars 


ceo  = 

317?681  -0?108  7 

6q  = 

52?886  -  0°061  T 

W- 

176?  868  +  350?  891 9830/ 

1/(1,0)  = 

-1.52 

Am(f')  = 

0.016/ 

R  = 

3397  ±4  km 

f  = 

0. 0065  +  0.0017 

Although  the  phase  angle  of  Mars  can  be  as  large  as  47°,  the  phase  relation  for 
its  magnitude  is  satisfied  by  a  single  term.  Mars'  surface  contains  a  large  number 
of  visible  markings.  The  markings  cause  the  brilliancy  of  Mars  to  vary  about  0.15 
magnitudes  over  its  period  of  rotation.  However,  the  amplitude  of  the  variation  is 
not  fixed,  and  is  modified  by  other  factors  such  as  the  transparency  of  the  atmo- 
sphere from  planetwide  sand  storms.  There  appears  to  be  an  annual  variation  as 
well.  All  these  additional  factors  can  cause  variations  in  the  visual  magnitude  of  up 
to  0.1  magnitudes. 

The  cartographic  prime  meridian  of  Mars  is  defined  so  that  it  passes  through 
the  center  of  the  crater  Airy-O. 

7.44  Jupiter 

The  basic  parameters  for  Jupiter  are  given  in  Table  7.44.1. 

Multiple  longitude  systems  are  defined  for  Jupiter.  Each  system  corresponds 
to  a  different  apparent  rate  of  motion.  System  I  applies  to  the  mean  atmospheric 
equatorial  rotation  of  the  planet.  System  II  applies  to  the  mean  atmospheric  rota- 
tion north  of  the  south  component  of  the  north  equatorial  belt  and  south  of  the 
north  component  of  the  south  equatorial  belt  of  Jupiter.  System  III  applies  to  the 
origin  of  radio  emissions  on  Jupiter.  The  rotation  rates  for  both  System  I  and  Sys- 
tem II  are  uncertain  and  subject  to  change.  The  sub-Earth  and  subsolar  longitudes 
tabulated  in  The  Astronomical  Almanac  are  based  on  the  System  HI  longitudes. 


404 


EXPLANATORY  SUPPLEME 


Table  7.44.1 

Physical  Ephemeris  Parameters  for 
Jupiter 


a0 

=  268?05  -0?009  7 

=  64P49  +  0?003  T 

System  I  W/ 

-  67? 1  +  877? 900 1 

System  II  Wlt 

=  43?3  +  870?270f 

System  III  Wm 

=  284? 95  +  870? 5360000  f 

tf(1,0) 

=  -9.25 

Am(/) 

=  0. 005  / 

R 

=  71492  ±  4km 

f 

=  0. 06487  ±0. 00015 

Jupiter  is  the  most  luminous  of  the  planets.  Variations  in  the  brilliancy  of  the 
planet  with  rotation  are  small,  -0.01  magnitudes,  and  irregular.  There  are  also 
long-period  variations  correlated  with  changes  in  the  surface  features  of  the  planet. 

7.45  Saturn 

The  basic  parameters  for  Saturn  are  given  in  Table  7.45.1. 

For  Saturn  only  System  III  [observed  rotation  of  radio  emissions;  Desch  and 
Kaiser  (1981)]  rotations  are  defined.  Also,  like  Jupiter,  the  mean  rotation  rate  of 
the  atmosphere  is  uncertain  and  subject  to  change.  The  tabulated  sub-Earth  and 
subsolar  longitudes  in  The  Astronomical  Almanac  use  the  System  III  longitudes. 
The  previously  defined  System  I  rotation  system  has  been  found  to  be  of  little  use 
since  the  Voyager  encounters  with  Saturn,  and  is  no  longer  supported  by  the  IAU. 

Because  of  the  brilliance  of  Saturn's  rings,  the  brilliance  of  the  planet  alone  is 
not  well  known;  so  the  combined  planet-ring  magnitude  and  surface  brightness  are 
tabulated.  The  phase  coefficient  for  Saturn  includes  the  rings.  The  visual  magnitude 
in  Table  7.45.1  is  the  extrapolated  value  for  the  planet  alone  at  1 AU  and  0°  phase 


Table  7.45.1 

Physical  Ephemeris  Parameters  for 
Saturn 


<*0 

=  40?58-0.°036T 

«o 

=  83?54-0?004  7 

System  III  1% 

=  38?90  +  810?7939024f 

1/(1-0) 

=  -7.19 

Am(i) 

=  0.044/ 

R 

=  60268  +  4  km 

f 

=  0.09796  +  0.00018 

7  i  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  405 

ie_  There  is,  however,  an  additional  term  for  variation  in  the  brightness  of  the 
planet  with  the  aspect  of  the  rings: 

Vt  =  -2.60sin|ej  +  1.25  sin2  e,  (7.45-1) 

where  Vr  is  the  visual  magnitude  of  the  rings  and  e  is  the  Saturnocentric  sub-Earth 
latitude.  There  is  little  evidence  for  variations  in  the  magnitude  in  the  brightness 
of  Saturn  with  its  rotation  or  over  extended  periods  of  time. 

7.46  Uranus 

The  basic  parameters  for  Uranus  are  given  in  Table  7.46.1, 


Table  7.46.1 

Physical  Ephemeris  Parameters  for 
Uranus 


a0 

= 257P43 

h 

=  -15P10 

System  III  Wm 

=  203P81  -  501? 1600928  f 

1/(1,0) 

=  -7.19 

Am(/) 

=  0. 0028/ 

R 

=  25559  ±  4  km 

f 

=  0.02293  +  0.  00080 

Like  Venus,  Uranus  rotates  in  the  retrograde  direction.  There  is  evidence  for 
variation  of  the  brightness  of  Uranus  with  rotation,  but  it  has  not  been  confirmed. 
A  small  term  with  a  period  of  84  years  is  expected  in  Uranus'  magnitude  due  to  the 
flattening  of  the  planet  and  the  high  inclination  of  its  equator  to  its  orbital  path. 
Just  as  for  Saturn,  only  the  rotation  rate  for  radio  emissions  (System  III)  is  defined 
for  Uranus. 


7-47  Neptune 

The  basic  parameters  for  Neptune  are  given  in  Table  7.47.1. 

The  phase  angle  of  Neptune  at  its  greatest  elongation  is  very  small,  so  the 
variation  in  brightness  of  the  planet  from  its  phase  angle  is  unknown.  There  is 
some  evidence  of  variation  in  the  brightness  of  Neptune  with  its  rotation.  There  is 
Ho  evidence  of  long-period  variations  in  its  brightness.  Only  the  System  III  rotation 
rate  for  radio  sources  is  defined  for  Neptune. 


406 


EXPLANATORY  SUPPLEMENT 


Table  7.47.1 

Physical  Ephemeris  Parameters  for  Neptune 


QO  =  299?36  +  0?07sinW 
<50  =  43?46  -  0?51  cos  N 
System  III  Wm  =  253P18  +  536°3128492  f  -  0?48sin  N 
1/(1,0)  =  -6.87 

R  =  247641  15  km 
/  =  0.0171  ±0.0013 

wh@rs 

/V  =  357?85  +  52?316f 


7.48  Pluto 

The  basic  parameters  for  Pluto  are  given  in  Table  7.48.1. 

The  position  for  the  north  pole  and  the  prime  meridian  of  Pluto  is  derived  from 
Harrington  and  Christy  (1981).  The  motion  of  the  prime  meridian  and  the  position 
of  the  pole  for  Pluto  are  given  under  the  assumptions  that  the  satellite's  orbital 
plane  is  coincidental  with  Pluto's  equatorial  plane  and  that  the  orbital  motion  of 
Pluto's  satellite  is  synchronous  with  Pluto's  rotation.  Like  Uranus,  the  rotation  of 
Pluto  is  retrograde,  and  the  inclination  of  Pluto's  axis  to  its  orbit  is  nearly  90°. 
Because  of  Pluto's  great  distance  from  the  Sun  and  its  small  size,  its  flattening  is 
unknown,  but  is  presumed  to  be  small  because  of  its  slow  rotation  rate. 

The  given  brilliancy  at  a  distance  of  1  au  and  a  phase  angle  of  0°  is  the  combined 
magnitude  of  Pluto  and  its  satellite,  Charon.  The  brilliancy  given  is  from  Harris 
(1961);  however,  the  brilliancy  of  Pluto  has  been  changing  over  time  as  different 
albedo  features  of  the  planet  become  visible  (see  Marcialis,  1988).  The  phase  coef- 
ficient given  was  determined  by  Binzel  and  Mulholland  (1984).  There  is  a  change 
in  the  combined  magnitude  with  rotation  of  the  Pluto-Charon  system  due  to  the 
differing  albedos  of  the  two  bodies  and  surface  markings  on  Pluto.  The  rotational 
change  in  magnitude,  like  the  mean  magnitude,  has  been  changing  with  time  as 
different  albedo  features  of  the  planet  are  exposed  to  the  Earth  in  Pluto's  orbit 


Table  7.48.1 

Physical  Ephemeris  Parameters  for  Pluto 


a0  =  31 3?  02 
60  =  9P09 

W  =  236?  77  -  56?  36231 95  f 
K(1,0)  =  -1.01 
Am  =  0. 041  ( 
ft=  1151  ±6km 


7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  407 

around  the  Sun.  The  rotational  difference  between  the  minimum  and  maximum 
brilliancy  was  0.11  magnitudes  in  1954  (Harris,  1961)  and  was  0.291  magnitudes 
■  1981  (Marcialis,  1988).  The  period  of  the  rotational  variations  is  6.3867  days. 
During  the  eclipse  season  the  Pluto-Charon  mutual  events  cause  changes  in  the 
magnitude  as  deep  as  0.50  magnitudes  (Tholen  et  al,  1987). 


7,5    PHYSICAL  EPHEMERIDES  OF  THE  SATELLITES 

The  disks  of  all  the  planetary  satellites  aside  from  the  Moon  are  so  small  that 
they  cannot  be  directly  observed,  except  from  interplanetary  probes.  Therefore, 
the  amount  of  information  tabulated  for  the  physical  ephemerides  is  much  smaller 
than  that  for  the  planets. 

Unless  otherwise  stated,  the  values  for  the  sidereal  period  of  the  satellites  are 
from  Davies  et  al.  (1991),  and  the  value  for  the  phase  coefficients  are  from  Harris 
(1961). 

7.51    Satellites  of  Mars 

Both  of  Mars'  two  small  satellites,  Phobos  and  Deimos,  are  triaxial  ellipsoids,  with 
their  longest  axis  pointed  toward  the  planet.  The  source  for  the  reference  surfaces 
of  these  satellites  is  from  Mariner  9  measurements  by  Pollack  et  al.  (1973). 
The  basic  parameters  for  the  Martian  satellites  are  given  in  Table  7.51.1. 

Table  7.51.1 

Rotation  Parameters  for  Mars'  Satellites 

I  Phobos:     q0  =  317?68-0?108T+1?79sinM1 
S0  =  52P90  -  QPQ61  T  -  1  °08  cos  Mi 

W  =  35?06+1128?8445850f  +  0?6644x \Q-9f  -  1?42sinM,  -0?78sin/W2 

II  Deimos:     a0  =  316P65  -  0?108  T  +  2P98sin  M3 
60  =  53P52  -  0?061  T  -  1  ?78cos  M3 

W  =  79P41  +  285?  1618970  f  -  0P390  x  lO"10^  -  2?58sin  M3  +  0?  19C0S  M3 
The  values  for  MN  are 

M,  =  169?  51  -0? 4357640  t 
M2  =  1 92?  93  +  1 1 28?  4096700  f  +  0?  6644  x  1 0  "  9 12 

M3  =  53?47-0?0181510f   


Both  of  these  satellites  have  rotation  periods  that  are  synchronous  with  their 
orbital  periods.  Also,  both  satellites  have  secular  accelerations  in  their  rotation 
rates  which  appear  as  the  r2  terms  in  the  motion  of  their  prime  meridians.  These 
acceleration  terms  are  the  result  of  secular  changes  in  the  mean  distances  of  the 
Martian  satellites'  orbits.  The  different  signs  for  the  quadratic  terms  for  the  motion 


408  EXPLANATORY  SUPPLEMENt 

of  the  satellites'  prime  meridians  shows  that  Phobos'  orbit  is  contracting  with  time 
while  Deimos'  orbit  is  expanding. 

The  masses  of  Phobos  and  Deimos  are  derived  from  a  redetermination  by  Sjo- 
gren (1983)  of  the  perturbations  of  the  Viking  Orbiters  during  their  close  flybys  of 
the  satellites.  Information  on  the  magnitudes  of  Phobos  and  Deimos,  their  albedos 
and  their  colors  are  derived  from  Viking  photometry  of  the  satellites  that  has  been 
analyzed  by  Klassen,  Duxbury,  and  Veverka  (1979).  Because  the  satellites  are  very 
near  Mars,  information  on  the  phase  coefficients  for  both  satellites  and  the  (U  —  B) 
color  for  Phobos  are  useless  for  ground-based  observations  and  are  not  given. 


7.52   Satellites  of  Jupiter 

Physical  ephemerides  are  tabulated  for  sixteen  Jovian  satellites.  The  most  complete 
and  accurate  information  is  that  for  the  four  Galilean  satellites  and  four  inner 
satellites,  JV  (Amalthea),  JXIV  (Thebe),  JXV  (Adrastea),  and  JXVI  (Metis). 

The  basic  parameters  for  Amalthea,  Thebe,  Adrastea,  Metis  and  the  Galilean 
satellites  are  given  in  Table  7.52.1. 

These  satellites  all  have  periods  of  rotation  that  are  synchronous  with  their 
orbital  periods. 

The  values  for  the  visual  magnitude  at  1  AU  and  0°  phase  angle,  the  albedos, 
and  the  colors  of  the  Jovian  satellites  are  taken  from  Morrison  (1984).  The  Galilean 
satellites  have  been  observed  often  enough  that  well  determined  phase  relations  have 
been  derived  for  them. 

The  reference  surfaces  for  Amalthea  (Smith  et  ai,  1979);  the  Galilean  satellites 
(Davies  et  ai,  1991);  and  JXIV,  JXV,  and  JXVI  (Thebe,  Adrastea,  and  Metis; 
Burns,  1986)  were  derived  from  measurements  of  the  Voyager  spacecraft  pictures 
of  the  satellites.  Estimates  of  the  size  of  the  outer  Jovian  satellites  are  from  Tholen 
and  Zellner  (1984)  and  are  based  on  the  albedos  of  JVI  and  JVII  (Himalia  and 
Elara). 

Galilean  satellite  masses  are  calculated  from  the  perturbation  in  the  paths  of  the 
Pioneer  and  Voyager  spacecraft  flybys  (Campbell  and  Synott,  1985).  The  masses  of 
the  rest  of  the  satellites  are  based  upon  their  individual  sizes  and  the  mean  density 
of  the  compositions  inferred  from  their  albedos. 

Three  of  the  Galilean  Satellites  have  cartographic  coordinates  defined  by  surface 
craters.  The  cartographic  definitions  are  given  in  Table  7.52.2. 


7.53   Satellites  of  Saturn 

Physical  ephemerides  are  tabulated  for  17  Saturnian  satellites.  The  rotation  pe- 
riods are  tabulated  for  13  of  the  Saturnian  satellites.  The  rotational  elements  in 
Table  7.53.1  for  11  of  the  satellites  are  supplied  by  Davies  et  al.  (1991). 


Table  7.52.1 

Rotation  Parameters  for  Jupiter's  Satellites 


XVI  Metis: 

ao 

=  268°  05-0?  009  T 

«8 

=  64?  49  +  0?  003  7 

W 

=  302?  24+  1221?2489660f 

XV  Adrastea: 

a0 

=  268?05  -  0?009  7 

=  64? 49  +  0°003  T 

w 

=  5°  75  +  1206?  9950400; 

V  Amalthea; 

=  268?05  -  0? 009  7  -  0° 84 sin  J,  +0?01  sin2Jt 

=  64°49  +  0?003  7  -  0?36  COS  J\ 

w 

-  231  ?67  +  722? 631 4560  ?  +  0?76sifl  J-|  -  0?01  Sin2J, 

XIV  Thebe: 

=  268?05  -  0?009  7-  2?12sin  J2  +  0°04sin 2J2 

=  64? 49  +  0°003  7  -  0?91  COS  J2  +  0P01  cos2J2 

w 

=  9?  91  +  533?  7005330  f  +  1  ?  9 1  Sin  J2  -  0?  04  sin  2 J% 

I  lo: 

oca°n£     n° rtno  T  a.  n° flQd <sin     +  0°024  sin  Ja 

=  ^OO .  UD  —  U.  Uvl*  '  +  U.  w*r  air  1        '  u.  uci  on  i  */4 

k 

=  64°50  +  0?003  7  +  0?040cos  J3  +0°011  COS  J4 

w 

=  200°39  +  203?  4889538  f  -  0° 085  Sin  J3  -  0°  022  Sin  J„ 

Amy") 

=  0.046/  -  0.0Q10/2 

II  Europa: 

ao 

=  268°08  -  Q°0Q9  7+  1?086sin  J4  +0?060sin  J5  +  0?015sin  J6  +  0?009 sin  Jj 

<5o 

=  64°51  +0?003  7  +  0?468cosJ4  +  0° 026 cos  J5  +  0? 007 COS  J6  +  0°002cos  Jj 

W 

=  35°72+101?3747235f-0?980sinJ4  -0°054sinJs  -0?014sinJ6  -0?008s 

Am(() 

=  0.0312/  -  0.00125/2 

III  Ganymede: 

Q0 

=  268°  20  -  0?009  7  -  0?037  sin  J4  +  0?431  sin  J5  +  0?091  sin  J6 

=  64? 57  +  0? 003  7  -  0°01 6  COS  J4  +  0°  1 86  COS  J5  +  0?039  COS  Je 

w 

=  43°14  +  50°3176081  f  +  0?033sinj4  -0°389sinJ5  -0°082sinJ6 

Am(/) 

=  0. 323/  -  0. 00066/2 

IV  Callisto: 

Qo 

n°nnQ  T      n0ORflcin  /r-  +  00ciQn  <sin  Jc  +  0°010  sin  Ja 

..□n,  ,  rtOrtnaT      n°n9Qmo  i_  4.  n°  9Rd        ./f.  — 0°004cosJq 
.  ^,4  y j  +  y.  uu J  1    ■  u.  Ucy  coo  J5  +  u.                    u-  wv-r  k.^^ 

W 

rtenOn-r  .  oh  Q  c-7-(  fV7 1  C  *  i_rt°iifi1  ein   L.        0^          Sin  . —  fJ°009  Sin  Ja 

—  259r  67  +  til .  oMUiior  +  u.  uo  1  sin      —  u.  ojo  an  1  ^5     u.  uiw  on 

Amy] 

=  0.  078/  —  0,  00274/2 

where  the  values  of  Jn  ars 

I 

Jl 

=  73?32  +  91473?9  7 

■h 

=  198?54  +  44243?8  7 

•k 

^  =  283D90  +  4850?7  7 

•t 

=  355?  80+  1191?3  7 

,  =  119?90  +  262?1  7 

A 

;  =  229?80  +  64?3  7 

J) 

■  =  352?25  +  2382°6  7 

Ji 

l  =  113?35  +  6070°0 

Table  7.52.2 

Standard  Cartographic 
Longitudes  for  Jupiter's  Satellites 


Satellite       Crater  Meridian 


Europa  Cilix  182° 

Ganymede  Anat  128° 
Callisto         Saga  326° 


Table  7.53.1 

Rotation  Parameters  for  Saturn's  Satellites 


XVIII      Pan:  a0  =  40?6    -  O.°036  7 

*0=83.°53   -0?004  7 

IV  =  48.°  8     +626? 04400001 
XV        Atlas:  a0=40?58   —  0°036  T 

8$  =  83?53  -  0°004  7 

W  =  137"8B  +  598?3060OO0f 
XVII       Promelheus:      aa  =  40°5B  -  0P036  7 

«0=83?53    -0?004  7 

W  =  296°  14  +  587?  2890000  f 
XVII       Pandora:  a0 = 40?58  -  0?036  7 

60  =  83?53    -0°004  7 

W=  162?92  +  572?7891000/ 
XI         Epimetheus:      aa  m  40?58  -  0?0367  -  3?153sin  S,  +  0?086sin2S1 

60  -  83?52   -  0°0047  -  0?356cosS,  +  0.° 005 cos 2S, 

liV  -  293?87  +  518° 4907239  f  +  3?133sin  S,  -  0?086sin  2S, 
X  Janus:  a0  = 40?56  -  0?0367  -  1?623sin  Sj  +  0.°023sin2% 

60  m  83? 53  -  0?004  T  -  0?  1 83  cos  Sv,  +  0?001  cos  2Sj 

W  =  5B?83   +  51B?2359876(  +  1°613sin%  -  0?023sin2S2 

I  Mimas:  a0  =  40°66  -  0?0367  *  13?56sin  S3 

60  =  B3.°52  -  0?0047  -  1?53cos  S3 

IV  =  337?46  +  381 0 9945550  f-  13°48sinS3  -44?e5sinSn 

II  Enceladus:        u0  =  40?66  -  0?036  7 

60  =  83.°  52   -  0?004  7 

W  =  2?82     +  262?7318996 ( 

III  Telhys:  a0  =  40?66  -  0°0367  +  9?66sin  S4 

*0  =  83.°52   -0?0047-  1?09cosS4 

W  ■  10.° 45   *  190.°6979085  I  -  9?60sin  S4  +  2°23sin  £9 

XIII  Teleslo:  a0 = 50?50  -  0?036  7 

60  =  84?06  -  0?004  7 

W  =  56°  88   +  190.°  6979330( 

XIV  Calypso:  Qrj  >  40?58  -  0°0367  +  13?943sin  S5  -  1?6B6sin2S5 

«0  =  B3.°43    -  0?0047-  1  ? 572 COS  S5  +  0?  095 cos 2S5 

W  =  149?36  +  190?6742373  t  -  13°649sin  S5  +  1?685sin2S5 

IV  Dione:  a0  =  40?66  -  0?Q36  7 

A0=B3?52   -0P004  7 
W  =  357.°00  +  131°5349316f 
XII        Helene:  o0  =  40?58  -  0°0367+ 1c662sin     +  0?024sin2% 

60  =  83?52   -  0?0047-  0?187cosS6  +  0°C96gos2$, 
W  =  245?39  +  131?6174056f  -  1?651  sin  Sj  *  0?024sin  2% 

V  Rhea:  ct0  =  40°38  -  0?0367  +  3?10slnS, 

60=83?55  -0?0047  -  0?35cosS7 

W  =  235°16  +  79?690047Bf-  3?08sinSV 
v'         "Titan:  n0=36?41    -  0?0367  +  2.°66stnSa 

*0=83.°94  -0?0047  -  0?30cosSs 

W  =  189° 64  f  22° 5769768  I  -  2?64  sin  Sg 
VIII        lapetus:  a0  =  316?16  -  3?949  7 

t0  =  75.°03   -  1?  143  7 

W  =  350°  20  +  4?  5379572  r 
XI  Phoebe:  n0  =  355°16 

60  =  68?70   -  1?143  7 

W  =  304?70  +  930°8338720  ( 


where  the  values  of  S„  are 


S,  =  353?32  +  75706?7  7 
S5  •  28c72   +  75706?7  7 
S3  =  177? 40  -  36505?5  7 
St  =300?00  -  7225?9  7 
S5=53°59   -  8968?  8  7 
Sfe  =  143?3B  -  10553?5  7 
Se  ■  345?20  -  1016?3  7 
Sa=29?80    -  52?  17 
Sg  =316?45  +  506°2  7 


7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES 


411 


Table  7.53.2 

Standard  Cartographic  Longitudes 
for  Saturn's  Satellites 


Satellite 

Crater 

Meridian 

Mimas 

Palomides 

162° 

Enceladus 

Salih 

5° 

Tethys 

Arete 

299° 

Dione 

Palinurus 

63° 

Rhea 

Tore 

340° 

lapetus 

Almeric 

276° 

Wisdom,  Peale,  and  Mignard  (1984)  have  shown  that  one  of  the  major  Satur- 
nian  satellites,  Hyperion,  is  tumbling  chaotically  rather  than  being  in  synchronous 
rotation.  This  tumbling  is  a  result  of  Hyperion's  triaxial  shape  and  its  rather  ellip- 
tical orbit  with  a  mean  distance  near  the  4/3  Titan  resonance. 

The  reference  surfaces  for  the  larger  satellites  are  derived  from  Smith  et  al. 
(1982).  The  size  of  the  smaller  satellites  are  provided  by  their  geometric  albedos 
(Thomas  et  al.,  1983). 

Morrison,  Owen,  and  Sonderblom  (1986)  determined  the  magnitudes,  albedos, 
and  colors  of  Saturn's  satellites.  lapetus  is  especially  interesting,  because  the  leading 
hemisphere  is  over  two  magnitudes  dimmer  than  its  trailing  hemisphere.  Windorn 
(1950)  gives  a  parametric  equation  for  the  brightness  (not  the  magnitude)  of  the 
itellite  of 

B  =  0. 57 1  -  0.429  sin  a,  (7.53-1) 

here  a  is  its  orbital  longitude,  with  the  maximum  occurring  at  greatest  western 
elongation, 

Tyler  et  al  (1981,  1982)  determined  the  tabulated  masses  for  Mimas,  Ence- 
ladus, Tethys,  Dione,  Rhea,  Titan,  and  lapetus  from  the  deflections  of  the  Voyager 
trajectories.  The  masses  of  Enceladus  and  Mimas  are  of  lower  accuracy  and  are 
contradicted  by  resonance  theories  (e.g.,  Greenberg,  1984). 

Six  of  the  major  Saturnian  satellites  have  cartographic  coordinates  denned  by- 
surface  craters.  The  cartographic  definitions  are  given  in  Table  7.53.2. 

7-54   Satellites  of  Uranus 

The  basic  parameters  for  the  15  known  satellites  of  Uranus  are  given  in  Table  7.54.1. 

The  radii  for  the  Uranian  Satellites  (Smith  et  al,  198G)  are  derived  from  mea- 
surements of  Voyager  photographs.  The  masses  for  the  five  large  satellites  (Viellet, 
1983)  are  derived  from  mutual  orbital  perturbations.  Smith  et  al.  (1986)  determined 


Table  7.54.1 

Rotation  Parameters  for  Uranus'  Satellites 


XIII 


XIV 


Cordelia: 


Ooneia: 


Cressida 


Juliet: 


Portia: 


Miranda: 


Ariel: 


Umbriet: 


Titania: 


Oberon: 


q0  =  257?  31  -0?15sin(J, 
i0  *  -15?18*0?14cost/, 
W  =  127?69  -  1074?5205730  I  ■ 

ao  =  257?31  -  0?09sinU2 
S0  »  -15?18  +  0?09cosHj 
W  m  130?35  -  956?4068150  f  - 


0.°04sinLf, 


0°02sinU7 


0?08sint/a 


O.°03sint^ 

q0  =  257?31  -  0?  16  sin  Cfj 
S0  =  - 1 8?  1 8  +  0.°  1 6  cos  U3 
W  =  105."  46  -  828°  391 4760  f  -  0?  04  sin  1% 

a0  -257?31  -  0?04sin(;4 
«o  -  -15?18  +  0?04cos(J4 
W  m  59?  16  -  776?  581 6320  f  -  0?  01  Sin  U4 

a0  =  257.°31  -0?17sinU5 
*rj  =  —  1 5°  1 8  +  0?16cos(J5 
W  =  95?08  -  760P0531690  I  -  0?  04  sin  1% 

aa  =  257?31  -0?06slnU6 
60  m  -15?18  +  0?06cos(/6 
W  =  302?56  -  730?1253660!  -  0?02sin  U6 

«0  =  257.°31  -  0?09sfn  Uj 
S0  m  -15?18+0?09txjsL>7 
W  =  25?  03  -  7O1?4865870f  - 

a0  =  257?31  -0?29sinL% 
«o  =  -15?18  +  0?28cosl/8 
W  =  314?90  -  644?631 1260  f  - 

o0  =257?31  -  0?03sinU, 
So  =  -15?ie  +  0?03cost/9 
W  a  297? 46  -  577P3628170  f  -  0?01  sin 

arj  =  257?31  -0?33sinU10 
*o  ■  -15?18  +  0?31cosU10 
W  =  91?24  -  472?5450690f  -  0?09sin  Ult> 

Q0  ■  257? 43  +  4?41  sin  U„  -  0?04sin  2fJ„ 
Sa  =  -15?08  +  4?25cosiVl1  -  0?02cos2U,, 
IV  •  30?  70  -  254?  6906892 1  -  1?  27  sin  l/12 

+  0?15sin2Ut2  +  1?15slnl/n  -  0?09sln2U,, 

ao  =  257?43  +  0?29sin  U13 
60  =  -15?10  +  0?28cosU13 

W  =  156?22  -  142?B356681  (  +  Q?05  sin  U12  +  0?08sin  U13 
a0  =  257?43  +  0?21sinl/,< 
SB  =  -15?10  +  0?20cosU14 

W  -  108?05  -  86? 8688923  (  -  0°G9sin  U,2  +  0?06sirl  Uu 
a<,  =  257?43  +  0?29  sin  l/,5 
Sn  =  -1S°10  +  0?2BcosU15 
W  =  77?74  -  41  "3514316  (  *  0?08sin  U15 

a0  =  257? 43  +  0?  16  sin  l/,6 

60  =  -15?10  +  0?16cosLf,6 

W  =  6?77  -  26?7394932  t  +  0°04  sin  U,6 


where  the  values  of  Un  are 


=  115?75  +  54991?  87  T 

u9 

= 101?81 

+ 12872° 63  T 

[* 

=  141?69  +  41887?66  T 

"10 

=  138?64  +  8061?81  T 

(4 

=  135?03  +  29927?35  7" 

1*1 

=  102°23 

-  2024?22  T 

f4 

=  61?77  +  25733?59T 

=  316°41  +2863°  96  T 

t% 

=  249°  32  +  24471?  46  T 

U13 

= 304°01 

-  51?94T 

^6 

=  43°86  +  22278?41  T 

Uu 

=  308?  71 

-  93?17  T 

Uj 

=  77?66  +  20289?42  T 

Wis 

=  340?  82 

-  75?  32  T 

Us 

=  157?36 +  16652?  76  7 

U16 

=  259°  14 

-  504?81  T 

7  i  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  413 

the  magnitudes,  albedos,  and  colors  for  the  large  Uranian  satellites  from  Voyager  2 
photometry. 

7  55   Satellites  of  Neptune 

Neptune  has  eight  known  satellites.  However,  the  physical  ephemerides  of  Nereid 
and  Triton  are  the  only  ones  presently  included  in  The  Astronomical  Almanac.  The 
basic  parameters  for  seven  of  the  satellites  are  given  in  Table  7.55.1. 


Table  7.55.1 

Rotation  Parameters  for  Neptune's  Satellites 


IV 


VI 


VII 


Naiad: 


Thalassa: 


Galatea: 


Larissa: 


VIII  Proteus: 


Triton: 


"0 
«0 

w 
w 


■■  299°39  +  0?70sin  N  -  6°49sin  ftf1  +0°25sin2rt1 
i  43°35  -  0?51  cosW  -  4?75cosN1  +0?09cos2W1 
:  254?06  +  1222? 8441209  I  -  0°48sin  N  +  4°40sin 

■■  299?  39  +  0°70  Sin  N  -  0°28  Sin  Afe 

:43?44  -  0?51COSW  -  0°21  cos  W2 

:  102?06+  1155?7555612f  -  0?48sin N  +  0?19sin  N2 


0?  27  sin  2N 


Despina:      a0  -  299?  39  +  0?  70  sin  H  -  0?  09  sin  W3 
:43?44  -0?51COSN-0?07cOSW3 
:  306°51  +  1075°7341562  (  -  0°49sin  H  +  0? 06 sin  W3 


O0  : 


Q0  = 

s0  = 
w  = 

Qo 

w 

"0 
*0 

w 

«o  = 


W  : 


where  the  values  of  Nn  are 

N  =  357?85  +  52?316r 
W,  =  323?92  +  62606?6  7 
W2  =  220°51  +55064?2  7 
W3  =  354° 27  +  46564? 5  T 
W4  =  75?31  +26109?4  7 
W5  =  35? 36  +  14325?4  T 
N6  =  142°61  +2824?6T 
«7  =  177?85  +  52?316r 


299°39  +  0?70sinW  -  0?07sinN4 
43?43   -  0?51  cosW  -  0?05cosA/4 
258?09  +  839? 6597686  f  -  0?48  Sin  W  +  0?05  Sin  W4 

:299?38  +  0?70sinW-  0°27sin/V5 
:  43°40   -  0°51  COS  N  —  0?20  COS  N5 
■■  179°41  +649° 0534470/  -  0?48sin N  +  0?19 sin  Ws 

:  299? 30  +  0? 70  sin  N  -  0? 05  sin  W@ 
i42°90   -  0?51  cosW  -  0°04oosW6 
:  93?  38  +  320?  7654228  f  -  0?48sin  N  +  0°  036  sin  NB 

299°36  -  32°35sm/v7-6?28stn2/v7  -2°08sin3W7  -0°74sin4W7  - 
0?28sin5W7  -  0?11sin6«7  -  0?07sin7(V7  -  0?02sin8W7  - 
0?01  sin  9^7 

41?17  +  22?55  cos  Nj  +  2?  1 0  cos  2^  +  0°  55  cos  3/V?  +0°  16  cos  4^  + 

0?  05  cos  5  Nj  +  0°02cos6W7.  +  0°01  cos7«7 
296° 53  -  61?2572637/  +  22D25sinrV7  +  6.°73sin2W7  +2?05sin3/V7  + 

0?74sin4rV7  +  0?28sin5W7.  +  0?11sin6W7  +  0?05sin7W7  + 

0°02sin8rV7+0°01sin9rV7 


414  EXPLANATORY  SUPPLEMENT 

The  mass,  radius,  and  colors  of  Triton  are  determined  from  Voyager  2  data 
Little  is  known  of  Nereid  except  its  magnitude  at  1  AU  and  0°  phase  angle  (Mor- 
rison and  Cruikshank,  1974).  The  diameter  is  based  on  an  assumed  albedo  of  0.4 
Recent  studies  by  Williams  et  al.  (1991)  of  Nereid  indicate  that  it  may  have 
non-synchronous  rotation. 


7.56  The  Satellite  of  Pluto 

Charon,  Pluto's  only  known  satellite,  is  assumed  to  orbit  in  the  plane  of  Pluto's 
equator  and  in  synchronous  rotation.  The  position  of  its  north  pole  and  prime 
meridian  are  given  in  Table  7.56.1. 

Table  7.56.1 

Rotation  Parameters  for  Pluto's  Satellite 


a0  =312?02 
<50  =  9?09 

W  =  56°  77-  56?  3623195? 


The  mass,  diameter,  and  magnitude  of  Charon  are  based  on  observations  of 
Charon-Pluto  eclipses  (Dunbar  and  Tedesco,  1986). 


7.6    PHYSICAL  EPHEMERIDES  OF  THE  ASTEROIDS 

At  present,  the  only  physical  data  published  in  The  Astronomical  Almanac  for  the 
asteroids  are  H,  the  absolute  visual  magnitude  at  a  distance  of  1  AU  and  0°  phase 
angle;  G,  the  slope  parameter  that  depends  on  the  albedo;  the  visual  magnitude  at 
opposition;  and  the  estimated  diameters  for  139  asteroids.  These  data  are  supplied 
by  the  Institute  for  Theoretical  Astronomy,  St.  Petersburg,  Russia.  Additional  in- 
formation on  the  asteroids  can  be  found  in  the  Institute  for  Theoretical  Astronomy 
publication,  Minor  Planets. 

The  visual  magnitudes  of  the  asteroids  are  based  on  the  work  of  Bowell,  Harris, 
and  Lumme  (1988). 

Before  1970,  the  diameter  measurements  were  based  on  visual  micrometer  mea- 
surements or  occupation  observations.  Reliable  measurements  of  asteroid  radii  {e-g-< 
Dollfus,  1971;  Millis  et  al,  1987)  existed  for  only  five  asteroids:  Ceres,  Pallas,  Juno, 
Vesta,  and  Eros.  Since  then,  improved  estimates  of  the  diameters  have  resulted  fr°* 
development  of  the  radiometric  and  polarimetric  methods.  The  diameters  publishe 
in  The  Astronomical  Almanac  use  the  radiometric  observations  of  Morrison  (1977)- 

The  radiometric  method  is  simple  in  its  physical  principle,  but  compleX  t0 
discuss  quantitatively.  The  visible  brightness  of  an  asteroid  is  proportional  to  the 


?  i  PHYSICAL  EPHEMERIDES  OF  THE  SUN.  MOON,  PLANETS,  AND  SATELLITES  41 5 

product  of  its  geometric  albedo  and  the  square  of  its  mean  diameter.  If  one  of  these 
factors  is  known,  or  a  relation  between  the  two  factors  can  be  determined,  the  other 
factor  can  be  determined.  At  thermal  infrared  wavelengths,  the  dependence  of  the 
brightness  on  albedo  is  complementary  to  the  dependence  at  visible  wavelengths. 
For  example,  take  two  objects  at  the  same  distance  with  the  same  visible  magni- 
tude. If  one  is  dark  and  large,  and  the  other  is  small  but  highly  reflecting,  then  in 
infrared  emitted  radiation,  the  first  object  will  be  much  brighter  than  the  second 
one,  because  of  both  its  larger  size  and  its  higher  temperature.  The  complemen- 
tary nature  of  brightness  with  albedo  in  the  two  spectral  regions  is  the  basis  for 
the  radiometric  method  of  determining  diameters.  The  equations  relating  the  ob- 
servable parameters  (visible  and  infrared  magnitudes)  to  the  unknowns  (diameter 
and  geometric  albedo)  require  complicated  assumptions  to  be  made  concerning  the 
temperature  distribution  over  the  surface  of  the  asteroids  and  cannot  be  solved 
analytically. 

The  V  magnitude  for  an  object  at  phase  angle  i  and  R  =  I  AU  from  the  Sun  is 
related  to  the  radius,  r,  and  geometric  albedo,  pv  by 


V  =  ys  -  5  log  r  -  2. 5  \ogpv  -2,5  log  f3v(i)  +  log  R,  (7.6-1) 

where  Vs  is  the  magnitude  of  the  Sun  at  1  AU  and  (3v(i)  is  the  phase  coefficient  in 
intensity  units,  normalized  to  unity  at  i  —  0°.  The  brightness  of  the  same  object  at 
10  fim  (N  magnitude)  is 

N  =  KN  -  5  log  r  -  2. 5  \og(IN)  -  2.  5  log  eN(i),  (7.6-2) 

where  Kn  is  a  constant  determined  by  the  absolute  calibration  of  the  JV-magnitude 
system;  lN  is  the  infrared  surface  brightness  in  the  N  band,  obtained  by  averaging 
the  emission  from  each  surface  element;  and  eN{i)  is  the  effective  emissivity  in  the 
N  band  at  phase  angle  i.  Note  that  eN{0)  can  be  greater  than  unity  to  allow  for 
Peaking  of  the  infrared  emission  at  small  phase  angles,  but  at  the  same  time  eN(i) 
must  be  substantially  less  than  unity  at  large  i  to  satisfy  the  total  heat  balance, 
ft  h  is  assumed  that  the  planet  is  seen  at  zero  phase  and  the  surface  temperature 
ls  every where  in  equilibrium  with  the  absorbed  solar  energy,  the  distribution  of 
temperature  over  the  surface  will  be  given  by 

T(a)  =  T0R-m[(l  -B)/e]l/4cos"V  (7.6-3) 

ghere  To  is  the  equilibrium  blackbody  temperature  at  1  AU  (=  295°K),  B  is  the 
°nd  albedo,  e  is  the  average  emissivity,  and  a  is  the  local  solar  zenith  angle. 


41  6  EXPLANATORY  SUPPLEMENT 

A  first-order  solution  may  be  obtained  if  the  infrared  brightness  is  assumed  to 
be  proportional  to  the  absorbed  energy: 

IN  =  TlR~2(l  -B),  (7.6-4) 

where  T\  is  the  mean  surface  temperature  for  the  body.  When  this  substitution  is 
made  and  Equation  7.6-2  is  subtracted  from  Equation  7.6-1,  the  result  is 

V  -  N  =  { Vs  -  KN)  -  2. 5  logWv  I  eNT\ )  -  2. 5  log[pv  /  (1  -  qpv)],  (7.6-5) 

where  q  is  the  phase  integral  adjusted  to  correct  for  the  difference  between pv  and  its 
average  or  bolometric  equivalent.  To  solve  for  pv  from  the  observables  V  and  N,  it  is 
necessary  to  know  the  photometric  parameters  Vs,  KN,  and  T\  (or  its  more  general 
equivalent  7q).  The  ratio  of  the  phase  functions  in  both  the  visible  and  infrared 
must  be  known  also.  These  four  quantities  can  be  obtained  from  observations  over 
a  range  of  phase  angles.  Finally,  the  phase  integral,  q,  must  be  specified  to  obtain 
a  solution.  The  values  of  all  these  parameters  must  either  be  assumed  or  treated  as 
variables  in  a  calibration  of  the  method  based  upon  objects  of  known  diameter. 

Since  the  phase  integral  is  not  generally  known,  it  is  important  to  consider  how 
sensitive  the  derived  values  of  r,  pv,  and  B  are  to  changes  in  q.  Of  particular  signif- 
icance is  the  behavior  of  the  solutions  for  the  low-albedo  objects  that  predominate 
in  the  asteroid  belt.  In  Equation  7.6-5  as  pv  approaches  zero,  the  final  term  ap- 
proaches —2. 5  log/jy,  so  that  for  dark  surfaces,  the  solution  is  virtually  independent 
of  the  value  of  q.  However,  a  similar  exercise  for  B  shows  that,  even  at  very  low 
albedos,  the  final  value  of  the  Bond  albedo  remains  inversely  proportional  to  the 
assumed  phase  integral. 

In  this  simplified  solution,  the  expression  for  the  radius  is 

5  \og(r/ R)  =  KN -N -2.5  log{£NTi) -2.5  log(\  -  B).  (7.6-6) 

This  expression  does  not  contain  any  of  the  parameters  of  the  photometric  system 
including  the  observed  V  magnitude.  However,  the  derived  radius  is  sensitive  to 
the  infrared  parameters,  Ajv,  £n,  and  T\,  in  addition  to  the  observed  N  magnitude. 
Because  the  albedo  enters  only  via  the  (1  -  B)  term,  r  is  only  weakly  dependent  on 
the  albedo,  and  for  low  albedos  the  final  term  is  negligible.  For  this  reason,  a  much 
better  estimate  of  the  diameter  can  be  made  from  a  measurement  of  N  alone  than 
from  one  of  V  alone,  even  when  the  infrared  magnitude  is  less  well-determined  than 
the  visual  magnitude.  Furthermore,  even  a  very  rough  value  of  V,  when  combined 
with  a  measurement  of  N,  is  sufficient  to  define  a  reasonably  precise  diameter. 

One  of  the  assumptions  of  the  radiometric  models  is  that  the  local  surface  tem- 
perature is  approximately  in  instantaneous  equilibrium  with  the  incident  sunlight- 
Infrared  observations  of  Phobos  (Gatley  et  ai,  1974),  Eros  (Morrison,  1976),  and 


7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  417 

the  Galilean  satellites  (Morrison  and  Cruikshank,  1973;  Hansen,  1973)  have  shown 
that  all  these  objects  have  surface  thermal  conductivities  lower  than  that  of  the 
Moon.  As  a  result  of  these  low  conductivities,  the  surfaces  all  respond  very  rapidly 
to  changes  in  sunlight;  so  they  remain  close  to  equilibrium  even  for  a  rapidly  rotat- 
ing asteroid  such  as  Eros,  with  a  period  of  less  than  6  hours.  So  the  basic  assumption 
of  thermal  equilibrium  appears  to  be  valid. 


7.7  REFERENCES 

Atkinson,  R.d'E.  (1951).  "The  Computation  of  Topocetitric  Librations"  Mon.  Not.  Roy. 
Astr.  Soc.  Ill,  448-454. 

Binzel,  R.P.  and  Mulholland,  J.D.  (1984).  "Photometry  of  Pluto  During  the  1983  Oppo- 
sition: A  New  Determination  of  the  Phase  Coefficient"  Astron.  J,  89,  1759-1761. 

Burns,  J.  (1986).  "Some  Background  About  Satellites"  in  Satellites  J. A.  Burns  and  M.S. 
Matthews,  eds.  (University  of  Arizona  Press,  Tucson,  AZ),  p.  1-38. 

Campbell,  J.K.  and  Synott,  S.P.  (1985).  "Gravity  Field  of  the  Jovian  System  from  Pioneer 
and  Voyager  Tracking  Data"  Astron.  J.  90,  364-372. 

Carrington,  R.C.  (1863).  Observations  of  Spots  on  the  Sun  (Williams  and  Norgate,  Lon- 
don). 

Danjon,  A.  (1949).  "Photometrie  et  colorimetrie  des  planetes  Mercure  et  Venus"  Bull. 

Astron.  14,  2e  Serie,  315-345. 
Danjon,  A.  (1954).  "Magnitude  et  albedo  visuels  de  la  plane  te  Mercure"  Bull,  Astron. 

17,  2e  Serie,  363. 

Davies,  M.E.,  Abalakin,  V.K.,  Brahic,  A.,  Bursa,  M.,  Chavitz,  B.H.,  Lieske,  J.H.,  Seidel- 
mann,  P.K.,  Sinclair,  A.T.,  and  Tjuflin,  Y.S,  (1991).  "Report  of  the  IAU/IAG/COSPAR 
Working  Group  on  Cartographic  Coordinates  and  Rotational  Elements  of  the  Planets 
and  Satellites:  1991." 

Davies,  M.E.,  Hauge,  T.A.,  Katayama,  F.Y.,  and  Roth,  J.  A.  (1979).  Control  Networks  for 

the  Galilean  Satellites:  November  1919  The  Rand  Corporation,  R-2532-JPL/NASA. 
Desch,  M.D.  and  Kaiser,  M.L.  (1981).  "Voyager  Measurement  of  the  Rotation  Period  of 

Saturn's  Magnetic  Field"  Geophys.  Res.  Lett.  8,  253-256. 
Dollfus,  A.  (1971).  "Diameter  Measurements  of  Asteroids"  in  Physical  Studies  of  Minor 

Planets  T.  Gerhels,  ed.  NASA  SP-267  (NASA),  pp.  25-32, 
Dunbar,  R.S.  and  Tedesco,  E.F.  (1986).  "Modeling  Pluto-Charon  Mutual  Eclipse  Events: 

L  First-Order  Models"  Astron.  J.  92,  1201-1209. 
Duncombe,  R.L.,  Klepczynski,  W.J.,  and  Seidelmann,  P.K.  (1974).  "The  Masses  of  the 

Planets,  Satellites,  and  Asteroids"  Fund.  Cos.  Phy.  1,  119-165. 
Eckhardt,  D.H.  (1981).  "Theory  of  the  Libration  of  the  Moon"  The  Moon  and  the  Planets 

25,  3-49. 

Eckhardt,  D.H.  (1982).  "Planetary  and  Earth  Figure  Perturbations  in  the  Libration  of  the 
Moon"  in  High-Precision  Earth  Rotation  and  Earth-Moon  Dynamics  O.  Calame,  ed. 
(Reidel,  Dordrecht,  Holland),  pp.  193-198. 

Ga*ley,  I.,  Kieffer,  H.,  Miner,  E.,  and  Neugebauer,  G.  (1974).  "Infrared  Observations  of 
Phobos  from  Mariner  9"  Astrophys.  J.  190,  497-503. 

Greenberg,  R.  (1984).  "Orbital  Resonances  among  Saturn's  Satellites"  in  Saturn  T.  Ger- 
hels and  M.S.  Matthews,  eds.  (University  of  Arizona  Press,  Tucson,  AZ),  pp.  593-608. 


418 


EXPLANATORY  SUPPLEMENT 


Hansen.  O.L.  (1973).  "Ten  Eclipse  Observations  of  Io,  Europa,  and  Ganymede"  Icarus  lg 
237  246. 

Harris,  D.L.  (1961).  "Photometry  and  Colorimetry  of  Planets  and  Satellites"  in  Planets 
and  Satellites  G.P.  Kuiper  and  B.A.  Middlehurst,  eds.  (University  of  Chicago  Press 
Chicago),  pp.  272-342. 

Kuiper,  G.P.  (1954).  "Report  of  the  Commission  for  Physical  Observations  of  the  Planets 
and  Satellites"  Trans.  IA  U  9,  250. 

Lumme,  K.  and  Bowell,  E.  (1981).  "Radiative  Transfer  of  Atmosphereless  Bodies,  Ip 
Interpretation  of  Phase  Curves"  Astron.  J.  86,  1705-1721. 

Lumme,  K.,  Karttunen,  H.,  Bowell,  E.,  and  Poutanen,  M.  (1986).  "Inversion  of  Aster- 
oid Light  Curves  Using  Spherical  Harmonics"  in  Asteroids,  Comets,  Meteors  7/C.-I. 
Langerkvist,  B.A.  Lindblad,  H.  Lundstedt,  and  H.  Rickman,  eds.  (Uppsala  University, 
Uppsala,  Sweden)  pp.  55-59. 

Lumme,  K.,  Karttunen,  H.,  Piironen,  J.,  and  Bowell,  E.  (1986).  "Simultaneous  Solutions 
for  Pole,  Shape,  and  Albedo  Variegation  of  an  Asteroid"  Bull.  Am.  Astron.  Soc.  18, 
801. 

Marcialis,  R.L.  (1988).  "A  Two  Spot  Albedo  Model  for  the  Surface  of  Pluto"  Astron.  J. 
95,  941  947. 

Millis,  R.L.,  Wasserman,  L.H.,  Franz,  O.G.,  Nye,  R.A.,  Oliver,  R.C.,  Kreidl,  T.J.,  Jones, 
S.E.,  Hubbard,  W„  Lebofsky,  L.,  Goff,  R.,  Marcialis,  R.,  Sykes,  M.,  Frecker,  J., 
Hunten,  D.,  Zellner,  B.,  Reitsema,  H.,  Schneider,  G.,  Dunham,  E.,  Klavetter,  J., 
Meech,  K.,  Oswalt,  T.,  Rafeit,  J.,  Strother,  E.,  Smith,  J.,  Povenmire,  H-,  Jones,  B., 
Kornbluh,  B.,  Reed,  L.,  Izor,  K.,  A'Hearn,  M.F.,  Schnurr,  R.,  Osborn,  W.,  Parker, 

D.  ,  Douglas,  W.T.,  Beish,  J.D.,  Klemola,  A.R.,  Rios,  M.,  Sanchez,  A.,  Piironen,  J., 
Mooney,  M.,  Ireland,  R.S.,  and  Leibow,  D.  (1987).  "The  Size,  Shape,  Density,  and 
Albedo  of  Ceres  from  Its  Occultation  of  BD  +  8°417"  Icarus  72,  507-518. 

Morrison,  D.  (1976).  "The  Diameter  and  Thermal  Inertia  of  433  Eros"  Icarus  28,  125-132. 

Morrison,  D.  (1977).  "Asteroid  Sizes  and  Albedos"  Icarus  31,  185-220. 

Morrison,  D.  (1982).  "Introduction  to  the  Satellites  of  Jupiter"  in  Satellites  of  Jupiter  D. 

Morrison,  ed.  (University  of  Arizona  Press,  Tucson,  AZ),  pp.  3-43. 
Morrison,  D.  and  Cruikshank,  D.P.  ( 1973).  "Thermal  Properties  of  the  Galilean  Satellites" 

Icarus  18,  224-236. 

Morrison,  D,  and  Cruikshank,  D.P.  (1974).  "Physical  Properties  of  the  Natural  Satellites" 
Spac.  Sci.  Rev.  15,  641-739. 

Morrison,  D.,  Owen,  T.,  and  Sonderblom,  L.A.  (1986).  "The  Satellites  of  Saturn"  in  Satel- 
lites J. A.  Burns  and  M.S.  Matthews,  eds.  (University  of  Arizona  Press,  Tucson,  AZ), 
pp.  764-801. 

Pollack,  J.B.,  Veverka,  J.,  Noland,  M.,  Sagan,  C,  Duxbury,  T.C.,  Acton,  C.H.,  Jr.,  Born, 
G.H.,  Hartmann,  W.K.,  and  Smith,  B.A.  (1973).  "Mariner  9  Television  Observations 
of  Phobos  and  Deimos,  2"  J.  Geophys.  Res.  78,  4313-4326. 

Sjogren,  W.L.  (1983).  "Planetary  Geodesy"  Rev.  Geophys.  Space  Phys.  21,  528-537. 

Smith,  B.A.,  Sonderblom,  L.,  Batson,  R.,  Bridges,  P.,  Inge,  J.,  Masursky,  H.,  Shoemaker, 

E.  ,  Beebe,  R.,  Boyce,  J.,  Briggs,  G.,  Bunker,  A.,  Collins,  S.A.,  Hansen,  C.V.,  Johnson, 
T.V.,  Mitchell,  J*L.,  Terrile,  R.J.,  Cook,  A.F.,  II,  Cuzzi,  J.,  Pollack,  J.B.,  Danielson, 
G.E.,  Morrison,  D.,  Owen,  T.,  Sagan,  C,  Ververka,  J.,  Strom,  R.,  and  Suomi,  V.E- 
(1982).  "A  New  Look  at  the  Saturn  System:  The  Voyager  2  Images"  Science  215. 
504-537. 


7  /  PHYSICAL  EPHEMERIDES  OF  THE  SUN,  MOON,  PLANETS,  AND  SATELLITES  41 9 

gjuith,  B.A.,  Sonderblom,  L.A.,  Beebe,  R.,  Bliss,  D.,  Boyce,  J.M.,  Brahic,  A.,  Briggs, 
G.A.,  Brown,  R.H.,  Collins,  S.A.,  Cook,  A.F.,  II,  Croft,  S.K.,  Cuzzi,  J.N.,  Daniel- 
son,  G.E.,  Davies,  M.E.,  Dowling,  T.E.,  Godfry,  D.,  Hansen,  C.J.,  Harris,  C,  Hunt, 
G.E.,  Ingersoll,  A. P.,  Johnson,  T.V.,  Krauss,  R.J.,  Masursky,  H.,  Morrison,  D.,  Owen, 
T.,  Plescia,  J.,  Pollack,  J.B.,  Porco,  CP.,  Rages,  K.,  Sagan,  C,  Shoemaker,  E.M., 
Sromovsky,  L.A.,  Stoker,  C,  Strom,  R.G.,  Suomi,  V.E.,  Synott,  S.P.,  Terrile,  R.J., 
Thomas,  P.,  Thompson,  W.R.,  and  Veverka,  J.  (1986).  "Voyager  2  in  the  Uranian 
System:  Imaging  Science  Results"  Science  233,  43-64. 

Smith,  B.A.,  Sonderblom.  L.A.,  Beebe,  R.,  Boyce,  J.,  Briggs,  G.,  Carr,  M.,  Collins,  S.A., 
Cook,  A.F.,  II,  Danielson,  G.E.,  Davies,  M.E.,  Hunt,  G.E.,  Ingersoll,  E.,  Johnson, 
T.V.,  Masursky,  H.,  McCauley,  J.,  Morrison,  D.,  Owen,  T.,  Sagan,  C,  Shoemaker, 
E.M.,  Strom,  R.,  Suomi,  V.E.,  and  Veverka,  J.  (1979).  "The  Galilean  Satellites  and 
Jupiter:  Voyager  2  Imaging  Science  Results"  Science  206,  927-950. 

Thomas,  P.,  Veverka,  J.,  Morrison,  D.,  Davies,  M.,  and  Johnson,  T.V.  (1983).  "Saturn's 
Small  Satellites:  Voyager  Imaging  Results"  J.  Geophys.  Res.  88,  8743-8754. 

Tholen,  D.J.  and  Zellner,  B.  (1983).  "Multi-color  Photometry  of  the  Outer  Jovian  Satel- 
lites" Icarus  53,  341-347. 

Tholen,  D.J.,  Buie,  M.W.,  and  Swift,  C.E.  (1987).  "Circumstances  for  Pluto-Charon  Mu- 
tual Events  in  1988"  Astron.  J.  94,  1681-1685. 

Tyler,  G.L.,  Eshleman,  V.R.,  Anderson,  J.D.,  Levy,  G.S.,  Lindal,  G.F.,  Wood,  G.E.,  and 
Croft,  T.A.  (1981).  "Radio  Science  Investigations  of  the  Saturnian  System:  Voyager 
1  Preliminary  Results"  Science  212,  201-206. 

Tyler,  G.L.,  Eshleman,  V.R.,  Anderson,  J.D.,  Levy,  G.S.,  Lindal,  G.F.,  Wood,  G.E.,  and 
Croft,  T.A.  (1982).  "Radio  Science  with  Voyager  2  at  Saturn:  Atmosphere  and  Iono- 
sphere and  Masses  of  Mimas,  Tethys,  and  Iapetus"  Science  215,  553-558. 

Viellet,  C.  (1983).  "De  TObservation  et  du  Mouvement  des  Satellites  d'Uranus"  Ph.D. 
Thesis.  (Universite  de  Paris,  Paris). 

Williams,  LP.,  Jones,  D.H.P,  and  Taylor,  D.P.  (1991).  "The  Rotation  of  Nereid"  Mon. 
Not.  R.  Astr.  Soc.  lp-2p. 

Wisdom,  J.,  Peale,  S.J.,  and  Mignard,  F.  (1984).  "The  Chaotic  Rotation  of  Hyperion" 
Icarus  58,  137  152. 


CHAPTER 


Eclipses  of  the  Sun  and  Moon 

by  Alan  D.  Fiala  and  John  A.  Bangert 


8.1  INTRODUCTION 

All  bodies  orbiting  in  the  solar  system  cast  a  shadow  away  from  the  Sun.  In  the  most 
general  terms,  an  eclipse  occurs  when  the  shadow  of  one  body  falls  upon  another 
and  temporarily  blocks  out  a  portion  of  the  solar  illumination.  An  eclipse  is  distinct 
from  an  occultation,  which  is  a  block  in  the  line  of  sight.  Before  this  distinction  was 
understood,  however,  a  long  history  of  observation  from  Earth  created  different 
names  for  the  phenomena,  depending  on  what  objects  were  involved.  The  shadow 
of  the  Moon  falling  upon  the  Earth  was  called  a  solar  eclipse;  the  shadow  of  the 
Earth  falling  upon  the  Moon  was  called  a  lunar  eclipse;  and  the  shadow  of  a  planet 
falling  upon  the  Earth  was  called  a  transit  (across  the  Sun).  By  strict  application 
of  these  definitions,  a  solar  eclipse  is  really  an  occultation. 

The  basic  methods  by  which  eclipses  of  the  Sun  and  Moon  and  transits  of  Venus 
and  Mercury  are  predicted  and  described  were  introduced  by  Bessel  and  extensively 
developed  by  Chauvenet  (1891).  The  discussion  here  will  be  limited  to  describing 
the  calculation  of  data  that  are  necessary  to  observe  any  of  these  phenomena  from 
the  Earth. 

Bessel's  method  of  calculating  eclipse  predictions  is  based  on  the  following  con- 
cept: A  body  casts  a  shadow,  the  axis  of  which  is  a  line  extended  from  the  center  of 
the  Sun  through  the  center  of  the  body.  Observations,  by  necessity,  are  constrained 
to  the  topocentric  coordinate  system.  However,  the  geometry  and  kinematics  are 
easier  to  describe  in  a  system  oriented  to  the  cone  of  the  shadow — that  is,  one  in 
which  the  z-axis  is  either  parallel  to,  or  coincident  with,  the  shadow  axis,  and  the 
■^y-plane  passes  through  the  center  of  the  body  on  which  the  shadow  falls.  This  plane 
is  also  known  as  the  Besselian  plane.  A  description  of  the  progress  of  the  eclipse  is 
calculated  in  this  coordinate  system,  and  then  is  transformed  to  a  topocentric  sys- 
tem as  necessary.  Elements  describe  the  geometry  of  the  configuration  as  a  function 
°f  time;  circumstances  describe  distinct,  observable  events  by  time  and  place. 

421 


422  EXPLANATORY  SUPPLEMENT 

Diagrams  in  treatises  on  eclipses  by  necessity  are  exaggerated  to  illustrate 
points.  Hence,  the  diagrams  tend  to  disguise  the  fact  that,  in  reality,  the  bodies 
involved  are  very  small,  far  apart,  and  moving  relatively  slowly.  Thus,  the  shadows 
cast  are  long  and  slender,  there  are  many  small  angles,  and  the  relative  short-term 
motions  are  very  nearly  linear.  These  qualities  were  used  to  advantage  by  people 
equipped  only  with  tables  and  a  calculator,  as  it  was  necessary  and  adequate  to  use 
approximations  and  intermediate  trigonometric  constructs.  In  the  era  of  high-speed 
programmable  computers,  the  use  of  approximations  and  simplifying  constructs  is 
reduced  but  not  eliminated.  Also,  it  is  helpful  to  newer  generations  of  astronomers 
to  discuss  spherical  trigonometry  by  incorporating  more  vector  and  matrix  notation 
instead  of  direction  cosines. 


8.1 1    Eclipse  Data  Available  from  the  Nautical  Almanac  Office 

8.111  International  Agreements  Ever  since  astronomical  ephemerides  and  alma- 
nacs have  been  published,  eclipse  information  has  been  included.  This  was  a  natural 
action  because  the  extensive  calculations  required  are  based  on  predicted  ephem- 
erides. In  modern  times,  the  situation  is  much  eased,  but  the  Nautical  Almanac 
Office  continues  to  provide  information  on  every  eclipse  of  each  year.  The  infor- 
mation conforms  to  IAU  standards  and  is  not  changed  without  adequate  notice 
to  the  International  Astronomical  Union.  This  may  cause  some  misunderstandings 
(e.g.,  in  the  value  of  /t,  described  in  Section  8.12),  or  occasional  difficulties  when  a 
convention  changes  (for  instance,  longitude  is  now  considered  positive  to  the  east 
of  Greenwich).  Some  changes  that  improve  production  without  changing  the  infor- 
mation are  adopted  by  decisions  within  the  Nautical  Almanac  Office,  such  as  the 
change  in  the  solar  eclipse  map  curves  to  an  older  convention,  which  made  mechan- 
ical computer-controlled  plotting  feasible.  Other  special  publications  for  individual 
eclipses  are  designed  to  assist  the  scientific  observer  as  much  as  possible.  Since 
1949,  at  the  request  of  the  appropriate  Commissions  of  the  International  Astro- 
nomical Union,  the  principal  circumstances  of  all  solar  eclipses  have  been  routinely 
calculated  and  made  available  several  years  in  advance  of  the  publication  of  the  an- 
nual almanac.  This  working  agreement  continues  and  is  carried  out  by  the  special 
publications  described  in  Section  8.113. 

8.112  Data  Provided  in  The  Astronomical  Almanac  Elements  and  general  circum- 
stances are  given  in  The  Astronomical  Almanac  for  all  solar  and  lunar  eclipses, 
including  the  penumbra!  lunar  eclipses  that  occur  during  the  year.  For  the  solar 
eclipses,  maps  are  given  from  which  approximate  local  circumstances  may  be  ob- 
tained for  any  particular  place,  and  the  Besselian  elements  are  tabulated  at  intervals 
often  minutes  for  the  calculation  of  accurate  local  circumstances  for  any  point  on  or 
above  the  surface  of  the  Earth.  For  total  or  annular  solar  eclipses,  the  latitudes  and 
longitudes  of  points  on  the  central  line  and  on  the  northern  and  southern  limits,  the 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  423 

duration  of  the  total  or  annular  phase,  and  the  altitude  of  the  Sun  on  the  central 
line  are  tabulated  at  intervals  of  ten  minutes  or  less  throughout  the  eclipse.  For 
lunar  eclipses,  the  circumstances  and  their  times  are  the  same  for  all  parts  of  the 
Earth;  any  particular  phase  is  visible  from  any  point  at  which  the  Moon  is  above 
the  horizon. 

For  years  in  which  a  transit  of  Mercury  or  Venus  occurs,  general  circumstances 
and  a  map  are  given,  by  which  approximate  local  circumstances  may  easily  be 
estimated.  Formulas  are  also  provided  for  the  computation  of  more  accurate  local 
circumstances. 

The  information  that  appears  in  The  Astronomical  Almanac  is  prepared  a  min- 
imum of  three  years  before  the  event.  A  provisional  value  of  AT  to  the  nearest  whole 
second  is  assigned,  so  that  the  time  argument  is  provisional  Universal  Time  (UT) 
or,  more  precisely,  provisional  UTl  (see  Chapter  10).  More  details  are  given  in 
Sections  8.12  and  8.363. 

The  predictions  given  in  The  Astronomical  Almanac  take  no  account  of  the 
effects  of  refraction,  although  refraction  may  be  significant  for  the  reduction  of 
observations  intended  to  give  precise  positions.  The  Besselian  elements,  however, 
are  rigorously  independent  of  refraction. 

8.113  Data  Provided  in  Other  Publications  Material  from  the  section  of  The  As- 
tronomical Almanac  on  solar  and  lunar  eclipses  and  transits  is  also  published,  in 
advance  of  publication  of  The  Astronomical  Almanac  itself,  in  the  small  booklet 
Astronomical  Phenomena,  issued  annually  by  the  Nautical  Almanac  Office,  U.S. 
Naval  Observat  ory. 

In  1949,  the  U.S.  Naval  Observatory  began  a  publication  series  called  the  U.S. 
Naval  Observatory  Circulars.  The  series  transmits  astronomical  data  resulting  from 
continuing  programs  but  not  available  in  any  other  publications.  Two  of  the  con- 
tinuing programs  that  have  contributed  many  issues  to  this  series  are  solar  eclipse 
predictions  and  sunspot  counts.  There  are  two  kinds  of  solar  eclipse  circulars.  First, 
there  are  circulars  issued  well  in  advance  that  give  just  the  principal  circumstances 
of  all  solar  eclipses  in  a  multiple-year  period.  These  are  listed  in  Table  8.113.1. 
Second,  the  Observatory  issues  circulars  for  specific  solar  eclipses;  these  circulars 
contain  extensive  information  for  observers  to  choose  a  site  and  calculate  accu- 
rate local  circumstances.  Before  the  circulars  were  begun  in  1949,  this  information 
was  issued  in  Supplements  to  the  annual  American  Ephemeris.  Until  1991,  it  was 
the  policy  of  the  U.S.  Naval  Observatory  to  issue  a  circular  for  each  total  solar 
eclipse,  with  a  very  few  exceptions,  and  for  selected  annular  solar  eclipses  that  have 
some  observationally  interesting  features.  Typically  these  circulars  contained  gen- 
eral information  and  circumstances,  Besselian  elements,  a  discussion  of  anticipated 
meteorological  conditions  along  the  eclipse  path,  local  circumstances  for  selected 
^cations,  the  lunar  limb  profile  and  limb  corrections,  path  of  the  central  phase  tab- 
ulated by  time  and  longitude  at  sea  level  and  at  flying  altitudes,  and  detail  maps  of 


424 


EXPLANATORY  SUPPLEMENT 


Table  8.113.1 

U.S.N.O.  Solar  Eclipse  Circulars 


Lrir.  no. 

Ha  to 
L/dlc 

Ti+la 

1 1  lie 

1 

iy4y  July  i  a 

— 

Tracks  of  total  solar  eclipses  in  1952, 1953, 1954 

o 
£ 

jy^-y  oepiemuer  iy 

Tracks  of  total  solar  eclipses  in  1955,  1956, 1957 

16 

lyou  May  4 

Tracks  of  total  solar  eclipses  in  1958, 1959, 1960 

40 

1952  December  8 

Annular  and  partial  solar  eclipses  in  1955,  1956,  and  1957, 

Non-central  total  eclipses  of  1 957 

i  yo4  August  d\j 

Annular  eclipses  in  1958,  1959 

59 

1 955  June  28 

Solar  eclipses,  1960-1963 

85 

1958  April  16 

Solar  eclipses,  1 963-1 967 

89 

1960  June  15 

Solar  eclipses,  1 968-1 970 

101 

1964  July  29 

Solar  eclipses,  1971-1975 

113 

1966  December  15 

Solar  eclipses,  1976-1980 

142 

1973  April  20 

Solar  eclipses,  1981-1990 

170 

1986  November  7 

Solar  eclipses,  1991-2000 

Note:  No.  170  was  the  first  to  contain  eclipse  maps.  The  others  listed  only  numerical  data. 


the  portion  of  the  path  over  land.  The  U.S.  Naval  Observatory  planned  to  release 
each  circular  12  to  18  months  in  advance  of  a  particular  eclipse  and  to  incorporate 
the  best  value  of  AT  available  at  the  time  of  preparation.  However,  the  lead  time 
and  contents  were  subject  to  regular  review  with  respect  to  meeting  the  reported 
needs  of  the  scientific  community.  In  1992,  the  eclipse  circulars  were  discontinued. 

8.12   Corrections  to  the  Ephemerides 

The  basic  quantities  for  calculations  of  solar  and  lunar  eclipses  are:  the  apparent 
right  ascension  (as),  declination  (c~s),  and  distance  {Rs)  of  the  Sun,  and  the  apparent 
right  ascension  (am),  declination  (6m),  and  distance  (Rm)  of  the  Moon,  for  every  hour 
of  TDT  during  the  eclipse;  and  the  ephemeris  sidereal  time  at  0h  TDT  for  the  day  of 
the  eclipse  and  for  the  following  day.  The  apparent  places  of  the  Sun  and  the  Moon 
are  computed  rigorously  using  the  same  ephemerides  for  the  Sun  and  the  Moon  as 
are  used  for  The  Astronomical  Almanac,  and  using  the  reduction  methods  described 
elsewhere  in  this  book  (see  Chapter  3).  At  the  time  of  this  writing,  the  ephemerides 
are  based  upon  the  DE200/LE200  produced  by  the  Jet  Propulsion  Laboratory.  The 
ephemeris  sidereal  time  at  0h  TDT,  which  is  the  local  apparent  sidereal  time  on  the 
ephemeris  meridian,  is  the  same  numerically  as  the  (Greenwich)  apparent  sidereal 
time  at  0h  UT,  as  tabulated  in  The  Astronomical  Almanac. 

Gravitational  ephemerides  refer  to  the  positions  of  the  centers  of  mass  of  the 
bodies  concerned.  Eclipses,  however,  are  governed  by  the  positions  of  the  centers  of 
figures  of  the  Sun  and  the  Moon.  The  center  of  figure  of  the  Moon  does  not  coincide 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  425 

•with  its  center  of  mass;  to  allow  for  this  difference,  empirical  corrections  are  made  to 
the  mean  equatorial  coordinates  of  the  Moon,  referred  to  the  center  of  mass  of  the 
Earth.  Unpublished  investigations  have  shown  that  the  corrections  depend  upon 
the  lunar  librations  at  the  time  of  an  eclipse.  The  range  of  the  corrections  is  less 
than  0"5,  and  for  the  calculations  in  The  Astronomical  Almanac,  only  the  minimum 
corrections  are  applied.  These  are  AA  =  +0"50  and  A/3  -  — 0"25  for  the  LE200  lunar 
ephemeris.  The  corrections  are  made  during  the  apparent  place  computation  by 
rotating  the  mean  equatorial  geocentric  coordinates  of  the  Moon  into  the  ecliptic 
system,  applying  the  corrections  in  the  ecliptic  system,  and  rotating  back  into  the 
equatorial  system.  The  corrections  are  applied  as  constants  for  each  eclipse. 

The  semidiameters  of  the  Sun  and  the  Moon  used  in  the  calculation  of  eclipses 
do  not  include  irradiation.  The  adopted  semidiameter  of  the  Sun  (ss)  is  computed 
directly  from  the  ephemeris  of  the  Sun,  thereby  using  the  ephemeris  constants. 
However,  the  apparent  semidiameter  of  the  Moon  is  calculated  by  putting  its  sine 
equal  to  k  sin  7rm,  where  7rm  is  the  horizontal  parallax  and  k,  the  ratio  of  the  Moon's 
radius  to  the  equatorial  radius  of  the  Earth,  is  an  adopted  constant.  The  IAU 
adopted  a  new  value  of  k  (k  =  0. 2725076)  in  August  1982.  Before  that  time,  two 
different  values  of  k  were  used  in  computing  a  solar  eclipse.  The  value  taken  for 
the  lunar  ephemeris  was  used  for  the  most  part,  but  in  practice  it  was  too  large  for 
total  phase  in  total  solar  eclipses  because  of  the  effects  of  the  rough  lunar  limb.  As 
an  approximate  correction  for  this  effect,  a  smaller  value  of  k  was  adopted  solely 
for  calculating  duration  on  the  central  line  of  total  solar  eclipses.  This  smaller 
value  caused  numerical  inconsistencies  as  well  as  misunderstandings  on  the  part 
of  users  of  the  information.  Therefore,  when  the  new  value  was  adopted  in  1982 
to  conform  to  the  value  used  in  occultation  predictions,  it  was  agreed  implicitly 
that  limb  effects  are  no  longer  accounted  for,  but  are  averaged,  and  if  an  observer 
considers  them  to  be  important,  then  corrections  must  be  calculated  and  applied 
separately.  It  is  possible  for  these  effects  to  advance  or  retard  predicted  second- 
er third-contact  times  on  the  central  line  by  as  much  as  two  seconds  apiece.  The 
same  limb  corrections  can  be  applied  in  the  case  of  annular  solar  eclipses,  or  even 
lunar  eclipses,  but  the  effects  will  not  be  observable.  It  is  only  in  the  case  of  a  total 
solar  eclipse  that  the  presence  or  absence  of  any  light  from  the  solar  disk  is  easily 
detected  and  is  hence  critical  to  delicate  observations. 

The  calculation  of  the  occurrence  of  eclipses  does  not  depend  upon  the  time 
scale  for  the  portions  restricted  to  the  spatial  relationships  of  the  Earth,  Moon,  and 
Sun.  However,  for  calculation  of  phenomena  as  they  are  related  to  the  surface  of  the 
Earth  for  time  and  place  of  visibility,  it  is  necessary  to  use  Universal  Time  (UT1)  in 
the  best  approximation  possible.  This  approximation  is  achieved  by  adjusting  the 
ephemerides  at  the  start  of  the  calculations.  The  predictions  in  the  Astronomical 
Almanac  were  given  in  ephemeris  time  (ET)  until  1981,  when  AT  had  become  large 
enough  that  it  was  deemed  more  useful  to  publish  the  predictions  in  provisional 
Universal  Time  (see  Section  8.363  for  details). 


426  EXPLANATORY  SUPPLEMENT 

8.2   THE  OCCURRENCE  OF  LUNAR  AND  SOLAR  ECLIPSES 


8.21  Overview 

The  purpose  of  this  section  is  to  develop  conditions  that  can  be  used  to  determine 
whether  an  eclipse  will  occur  at  a  particular  conjunction  or  opposition  of  the  Sun 
and  Moon.  The  approach  is,  first,  to  develop  a  general  expression  for  the  geocentric 
least  angular  separation  of  the  Moon  and  either  the  Sun  or  the  antisolar  point,  when 
one  of  the  latter  is  in  the  vicinity  of  one  of  the  nodes  of  the  Moon's  orbit.  Second, 
expressions  for  the  apparent  sizes  of  the  shadows  are  found.  FinaUy,  discrimination 
tests  are  established.  Specifically,  to  develop  the  conditions  for  a  lunar  eclipse  the 
apparent  sizes  of  the  umbral  and  penumbral  shadows  of  the  Earth  are  compared 
to  the  geocentric  least  angular  separation  of  the  Moon  and  the  antisolar  point. 
To  develop  the  conditions  for  a  solar  eclipse,  expressions  for  the  geocentric  least 
angular  separation  of  the  Sun  and  the  Moon  are  derived  from  the  geometry  of 
each  particular  type  of  solar  eclipse  and  are  compared  with  the  geocentric  apparent 
angular  semidiameters. 

8.22  Geocentric  Least  Angular  Separation 

Consider  the  Sun  and  the  Moon  at  a  time  of  conjunction  or  opposition  in  longitude. 
In  order  for  an  eclipse  to  occur,  the  Sun  (or  the  antisolar  point)  and  the  Moon 
must  each  be  near  the  same  one  of  the  nodes  of  the  Moon's  orbit.  Thus,  the  ecliptic 
latitude  of  the  Moon  (/?m)  will  be  small,  and  plane  geometry  may  be  used. 


Ecliptic 
Moon's  orbit 


Figure  8.22.1 

Geometric  construct  for  determining  whether  any  kind  of  eclipse  will  occur  when  the  Moon  is  near 
one  of  the  nodes  of  its  orbit  on  the  ecliptic.  In  this  figure,  N  is  the  descending  node  as  seen  from 
outside  the  orbit,  looking  toward  Earth.  Let  S  represent  the  Sun  or  its  antisolar  point,  and  M  the  Moon, 
at  conjunction  or  opposition,  respectively,  when  the  apparent  separation  is  the  lunar  latitude  0m-  At 
some  later  time  when  the  two  points  have  moved  to  S',  M' ,  then  the  instantaneous  separation  is  a. 


a  I  ECLIPSES  OF  THE  SUN  AND  MOON  427 

This  situation  is  illustrated  in  Figure  8.22. 1.  This  is  a  general  representation;  (3m 
may  t>e  positive  (above  the  ecliptic)  or  negative  (below  the  ecliptic).  Correspond- 
'nfflv  /V  may  De  either  the  ascending  or  descending  node  of  the  lunar  orbit.  For  a 
lunar  eclipse,  S  represents  the  antisolar  point  at  opposition.  For  a  solar  eclipse,  S 
represents  the  center  of  the  Sun  at  conjunction.  For  either  case,  M  represents  the 
center  of  the  Moon.  Take  the  absolute  value  of  Pm,  which  is  the  latitude  of  the 
Moon  at  opposition  for  a  lunar  eclipse,  or  at  conjunction  for  a  solar  eclipse.  The 
primed  values,  M'  and  5',  represent  positions  at  a  time  when  angle  SMS'  =  7,  and 
the  angular  separation  of  M'  and  5"  is  ex.  I  is  the  inclination  of  the  Moon's  orbit  to 
the  ecliptic. 

We  wish  now  to  derive  an  expression  for  a  in  terms  of  known  quantities.  Define 
a  quantity  A,  a  ratio  of  the  longitudinal  motions: 

SP     Moon's  motion  in  longitude 

A  =          —  —  :  :  : — -  (5.22—1) 

SS'       Sun's  motion  in  longitude 


From  the  geometry: 


where 


<r2  =  (S'P)1  +  {M'Pf,  (8.22-2) 


S'P  =  SP  -  SS'  =  ( A  -  1  )/3m  tan  7.  (8.22-3) 

M'P  =  NP  tan  /  =  (SN  -  SP)  tan  /  =  /3m(l  -  A  tan  7  tan/).  (8.22-4) 

Thus, 

a2  =  /32[(A  -  l)2tan27  +  (l  -  Atan/tan7)2].  (8.22^5) 

In  order  to  find  the  value  of  7  at  which  er2  is  a  minimum,  take  the  derivative  of 
Equation  8.22-5  with  respect  to  7  and  set  it  equal  to  zero.  After  some  algebra,  the 
result  is: 


tan  7 


Atan/  (8.22-6) 
(A  -  1)2  +  A2tan2/" 

Substitute  Equation  8.22-6  into  Equation  8.22-5  to  obtain: 

a  =  /3m(A  -  1)[(A  -  l)2  +  A2  tan2  (8-22-7) 
This  equation  may  be  simplified  by  the  following  change  of  variables.  Let 

tan  /'  =  -r—. -  tan  /.  (8.22-8) 

A  —  1 


428 

EXPLANATORY  SUPPLEMENT 

1'  is  the  angle  at  which  the  moving  Moon  would  appear  to  intersect  the  eclmH 
from  the  point  of  view  of  an  observer  on  the  moving  point  S.  Then 

<T=/?mCOs/'-  (8.22-9) 
Equations  8.22-7  and  8.22-9  give  expressions  for  the  geocentric  least  angular  seDa 
ration  between  the  Moon  and  the  Sun  at  conjunction,  or  the  geocentric  least  an  JLr 
separation  of  the  Moon  and  the  antisolar  point  at  opposition  of  the  Sun  and  MD(  „ 


8.23   Occurrence  of  Lunar  Eclipses 

Now  that  we  have  an  expression  for  least  angular  separation  of  the  Moon  anrl 
the  antisolar  point  near  opposition,  let  us  examine  how  to  use  it  to  test  for  the 
occurrence  of  a  lunar  eclipse.  From  the  geometry  of  the  shadow  cone,  we  shall  find 
a  relationship  between  the  size  of  the  cone  and  other  well-known  quantities. 

8  231  ApparentSemidiametersof  the  Shadow  Cones  The  penumbral  shadow  cone 
of  the  Earth  is  defined  by  the  interior  tangents  between  the  Sun  and  the  Earth 
S  igure  8.231.1  illustrates  the  geometry.  In  the  diagram,  5  is  the  center  of  the  Sun  E 
is  the  center  of  the  Earth,  and  M  is  a  point  on  the  penumbral  cone  at  the  distance 
of  the  Moon.  The  line  LM  is  the  semidiarneter  of  the  cone  at  the  distance  of  the 
Moon.  The  known  quantities  are  angle  GME,  which  is  the  lunar  horizontal  paral- 
lax (nm)  based  on  the  mean  radius  of  the  Earth;  angle  SET,  which  is  the  apparent 
semidiarneter  of  the  Sun  (*);  and  angle  ETC,  which  is  the  parallax  of  the  Sun  (tts). 
we  wish  to  find  LM  as  the  angular  quantity  LEM  seen  from  the  Earth,  designated 


Figure  8.231.1 

SSSC  ZZT  t  ftSff '  PenUmbra'  Shad°W>  relatinS  i,S  ^ular  to  observed 
quantities.  In  this  diagram,  ZGME  =  nm.  ZETG  =  «•„  ZSET  =  js,  and  ZLEM  =  /, . 


/  ECLIPSES  OF  THE  SUN  AND  MOON 


429 


v 


Figure  8.231.2 

Geometric  parameters  of  the  Earth's  umbral  shadow,  relating  its  angular  size  to  observed 
quantities.  In  this  diagram,  ZGME  =  7rm,  ZETG  =  tts,  ZSET  =  i„  and  ZVEM  =  f2. 


fx.  Angle  EVM  is  an  intermediate  angle,  so  that  angle  EVM  =  angle  ETC  +  angle 
SET.  We  want  /,  =  angle  LEM  =  angle  GME+  angle  EVM.  Thus, 

/,  =  Km  +  ?rs  +ss.  (8.231-1) 

The  cross-section  of  the  shadow  is  not  a  true  circle,  because  the  Earth  is  not 
a  true  sphere.  To  compensate,  a  mean  radius  for  the  Earth  is  substituted,  which 
is  equivalent  to  substituting  for  nm  a  parallax  m  reduced  to  latitude  45°,  so  that 
fa  =  0.9983407rm.  Moreover,  observation  has  shown  that  the  atmosphere  of  the 
Earth  increases  the  apparent  semidiarneter  of  the  shadow  by  approximately  one- 
fiftieth.  Hence, 

ft  -  1-  02(tti  +  tts  +  (8.231-2) 

The  umbral  shadow  cone  of  the  Earth  is  defined  by  the  exterior  tangents  be- 
tween the  Sun  and  the  Earth.  The  vertex  falls  beyond  the  Earth  and  beyond  the 
Moon's  distance  as  well.  Figure  8.231.2  illustrates  the  geometry.  In  this  diagram,  S 
and  E  represent  the  centers  of  the  Sun  and  the  Earth,  respectively,  and  M  is  a  point 
on  the  umbral  cone  at  the  distance  of  the  Moon.  All  angles  are  as  described  in  the 
Previous  section,  except  that  angle  VEM,  the  apparent  semidiarneter  of  the  umbral 
cone  if 2),  replaces  angle  From  triangle  VEM,  f2  =  angle  GME  -  angle  EVM,  and 
from  triangle  TEV,  angle  EVT  =  angle  EVM  =  angle  SET  -  angle  ETG.  Thus, 

/2  =  1.02(7r1+7rs-Js)  (8.231-3) 

after  compensation  for  the  effect  of  the  Earth's  atmosphere  on  the  semidiarneter  of 
the  shadow. 

8.232  Conditions  for  a  Lunar  Eclipse  There  are  several  types  of  lunar  eclipse,  de- 
pending upon  what  portion  of  the  Earth's  shadow  the  Moon  passes  through.  We 


430  EXPLANATORY  SUPPLEMENT 

will  consider  the  conditions  for  each.  All  conditions  should  be  tested  to  find  the 
maximum  possible  eclipse. 

8.2321  Conditions  for  a  penumbra!  lunar  eclipse  A  penumbral  lunar  eclipse  occurs 
when  the  Moon  enters  partially  or  completely  into  the  penumbral  cone,  but  not  the 
umbral  cone.  The  right  side  of  Figure  8.2321.1  illustrates  the  limiting  case  for  ;i 


Figure  8.2321.1 

Composite  diagram  showing  limiting  conditions  for  different  types  of  lunar  eclipses,  not  to  scale. 
Limiting  conditions  that  separate  types  of  eclipses  occur  when  the  separation  of  the  center  of  the 
Moon  and  the  shadow  axis  is  equal  to  the  sum  or  difference  of  the  apparent  radius  of  the  Moon  and 
the  radius  of  the  cross-section  of  one  of  the  shadow  cones  at  the  distance  of  the  Moon.  Let  the  small 
circle  represent  the  Moon,  with  radius  sm,  the  shaded  circle  represent  either  the  umbra,  with  radius  U< 
or  the  penumbra,  with  radius  f\ ,  and  a  represent  the  distance  between  centers  S  and  M  or  M' .  On  the 
left  side,  if  a  <  f  -  sm,  the  Moon  is  totally  immersed  in  the  shadow.  On  the  right  side,  if  a  >  /  +  sm, 
the  moon  is  just  out  of  the  shadow.  If  the  Moon  lies  between  these  two  limits,  it  is  partially  eclipsed  in 
the  shadow.  The  type  of  eclipse  is  named  for  its  maximum  phase — total  (umbral),  partial  (umbral), 
total  penumbral,  or  partial  penumbral. 

penumbral  lunar  eclipse,  where  f  -  f\.  In  this  diagram,  S  represents  the  antisolar 
point  and  M'  represents  the  center  of  the  Moon.  Let  SM'  be  the  geocentric  least 
angular  separation  (cr)  given  by  Equation  8.22-9;  M'T  is  sm.  A  penumbral  eclipse 
will  occur  if  cr  is  less  than  f\  +sm.  Thus,  the  condition  for  a  penumbral  lunar  eclipse 
is 

cr  <  1.02(tt,  +tts  +ss)  +  jm.  (8.2321-D 

8.233  Conditions  for  a  partial  lunar  eclipse  A  partial  lunar  eclipse  occurs  when 
the  Moon  passes  through  the  penumbral  cone  and  partly,  but  not  completely,  into 
and  through  the  umbra.  The  right  side  of  Figure  8.2321.1  also  illustrates  the  limiting 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  431 

case  for  a  partial  (umbral)  lunar  eclipse,  except  this  time,  /  =  fi.  A  partial  eclipse 
will  occur  if  a  is  less  than  fa  +  sm.  Thus,  the  condition  for  a  partial  lunar  eclipse  is 

a  <  1 . 02(7T!  +  tts  -  ss)  +  sm.  (8.233-1) 


8.2331  Conditions  for  a  total  lunar  eclipse  A  total  lunar  eclipse  occurs  when  the 
Moon  passes  through  the  penumbral  cone  and  completely  into  and  through  the 
umbral  cone.  The  left  side  of  Figure  8.2321.1  illustrates  the  limiting  case  for  a  total 
(umbral)  lunar  eclipse,  where  /  =  /2.  In  this  diagram,  S  represents  the  antisolar 
point  and  M  represents  the  center  of  the  Moon.  Let  SM  be  the  geocentric  least 
angular  separation  (a)  given  by  Equation  8.22  9;  MT  is  sm.  A  total  eclipse  will 
occur  if  a  is  less  than  fi~sm.  Thus,  the  condition  for  a  total  lunar  eclipse  is 

tr<  L02(7n+7rs-ss)-jm.  (8.2331-1) 


8.24   Occurrence  of  Solar  Eclipses 

The  geometry  to  test  for  the  occurrence  of  a  solar  eclipse  is  similar  to  that  for  a 
lunar  eclipse.  In  this  situation,  we  are  examining  the  shadow  of  the  Moon  instead  of 
that  of  the  Earth.  The  shadow  is,  of  course,  smaller  and  shorter,  the  vertex  being  at 
about  the  same  distance  from  the  Moon  as  the  Earth.  Moreover,  the  Earth  is  much 
larger,  so  that  it  can  never  be  completely  within  the  Moon's  shadow.  In  searching 
for  the  occurrence  of  a  solar  eclipse,  we  use  the  center  of  the  Earth  as  the  reference 
point  of  observation.  The  expression  for  least  angular  separation  of  the  centers  of 
the  Sun  and  Moon  still  applies. 


8.241  Conditions  for  a  Solar  Eclipse  There  are  also  several  types  of  solar  eclipse, 
depending  upon  what  portion  of  the  shadow  reaches  the  Earth's  surface.  We  will 
examine  the  conditions  for  each.  It  is  not  necessary  to  correct  for  atmospheric 
augmentation  of  the  Moon's  shadow;  the  Moon  has  no  atmosphere.  It  is  also  not 
necessary  to  correct  the  parallax  for  shape;  this  is  done  by  limb  corrections,  if 
needed  (Herald,  1983). 


8-242  Conditions  for  a  partial  solar  eclipse  A  partial  solar  eclipse  occurs  when 
the  Earth  passes  through  the  penumbra  of  the  Moon's  shadow,  but  not  the  umbra. 
(Also,  partial  phase  is  seen  by  an  observer  in  the  penumbra  during  any  type  of 
solar  eclipse.)  Figure  8.242.1  illustrates  the  limiting  case  for  a  partial  solar  eclipse. 
In  this  figure,  5  represents  the  center  of  the  Sun,  M  the  center  of  the  Moon, 
and  E  the  center  of  the  Earth.  Point  O,  on  the  Earth,  lies  on  the  edge  of  the 
Penumbral  cone,  depicted  by  line  segment  OT,  which  also  serves  as  the  horizon  at 


432 


EXPLANATORY  SUPPLEMENT 


Figure  8.242.1 

Known  geometric  parameters  in  the  limiting  configuration  for  a  partial  solar  eclipse,  when  the 
Moon  is  externally  tangent.  As  seen  by  an  observer  at  O,  the  apparent  disks  of  the  Sun  and  the 
Moon  are  externally  tangent  along  the  line  OT.  In  this  diagram,  ZZOM  =  zL,  ZZEM  =  zm 
ZZOS  =  C  ZZES  =  zt,  ZMON  =  s'm,  and  ZSOT  =  si 


O;  point  Z  is  at  the  zenith  for  an  observer  at  O.  The  topocentric  zenith  distances 
of  the  Moon  and  the  Sun  at  O  are: 

z'm  =  90°  -  ZMON  =  90°  -  4, 

z's  -  90°  -  ZTOS  =  90°  +  4.  (8.242-1) 

where  s'm  and  s'g  are  the  topocentric  semidiameters  of  the  Moon  and  the  Sun,  re- 
spectively. The  geocentric  angular  separation  between  the  Moon  and  the  Sun  is 
angle  MES,  which  is  equal  to  the  difference  between  the  geocentric  zenith  distances 
of  the  Sun  and  the  Moon,  zs  -  zm-  The  geocentric  zenith  distances  (z)  are  related 
to  their  corresponding  topocentric  values  (z1)  by 

Z  =  l!  -  ft',  (8.242-2) 

where  -k  is  the  geocentric  parallax.  Assuming  a  spherical  Earth,  7r'  is  given  in  terms 
of  the  horizontal  parallax  (w)  by 


tt'  =  sin  1  (sin  tt  sin  z'). 


(8.242-3) 


B  /  ECLIPSES  OF  THE  SUN  AND  MOON  433 

Substituting  Equations  8.242-1  and  8.242-3  into  Equation  8.242-2,  neglecting  the 
augmentation  of  the  semidiameters,  and  setting  coss'  equal  to  unity  yields 

Zm  =  90    —  Sm  —  7Tm, 

zs  =  90°+ss-^s.  (8.242-4) 
Setting  angle  MES  equal  to  the  geocentric  least  angular  separation  (ct)  yields 


<T  =  Zs  -  Zm  -      +  sm  +        ~  ^s- 


(8.242-5) 


A  solar  eclipse  will  occur  when  the  apparent  least  angular  separation  of  the  centers 
of  the  Sun  and  the  Moon  is  less  than  the  sum  of  their  apparent  semidiameters. 
Thus,  the  condition  for  a  partial  solar  eclipse  as  seen  from  the  geocenter  is 


a  <  Ss  +Sm  +7Ym  -  7TS. 


(8.242-6) 


8.2421    Conditions  for  a  central  solar  eclipse  If  the  observer  on  Earth  passes 

through  the  penumbra  of  the  Moon's  shadow  and  into  the  umbra,  he  or  she  expe- 
riences a  central  solar  eclipse.  If  the  reference  observing  point  is  in  the  umbra  on 
the  inside  of  the  vertex,  the  eclipse  is  total.  If  the  reference  point  is  in  the  umbra 
on  the  outside  of  the  vertex,  the  eclipse  is  annular.  If  the  reference  point  is  in  the 
umbra  and  passes  through  the  vertex,  it  is  an  annular-total  eclipse.  In  the  rare  event 
that  an  observer  near  a  pole  sees  a  total  eclipse,  but  the  shadow  axis  does  not  pass 
through  the  surface  of  the  Earth,  the  eclipse  is  a  noncentral  total  eclipse.  A  central 
solar  eclipse  will  occur  when  the  apparent  separation  of  the  centers  of  the  Sun  and 
the  Moon  is  less  than  the  absolute  value  of  the  difference  of  the  apparent  semidi- 
ameters. The  condition  for  the  occurrence  of  an  annular  solar  eclipse  is  specifically 
derived  in  this  section,  but  the  same  condition  may  be  used  to  differentiate  between 
the  occurrence  of  any  type  of  central  solar  eclipse  (total,  annular,  or  annular-total) 
and  the  occurrence  of  a  partial  solar  eclipse.  Figure  8.2421.1  illustrates  the  geome- 
try. The  definitions  in  this  figure  are  identical  to  the  definitions  of  Figure  8.242.1, 
except  that  point  O  now  lies  on  the  edge  of  the  umbral  cone.  The  topocentric  zenith 
distances  at  O  are 

4  =  90°  +  ZMON  =  90* +C  auttW) 
z's  =  90°  +  ZTOS  =90° +4 


Just  as  in  the  preceding  section,  the  geocentric  angular  separation  between  the 
Moon  and  the  Sun  is  angle  MES,  which  is  equal  to  \Zs  -  Zml  the  difference  between 
the  geocentric  zenith  distances  of  the  Sun  and  the  Moon.  Employing  the  same 


434 


EXPLANATORY  SUPPLEMENT 

z 


Figure  8.2421.1 

Known  geometric  parameters  in  the  limiting  configuration  for  a  partial  solar  eclipse,  when  the  Moon 
is  internally  tangent.  As  seen  by  an  observer  at  O,  the  apparent  disks  of  the  Sun  and  the  Moon  are 
internally  tangent  along  the  line  OT.  In  this  diagram,  ZZOM  =  z'm,  ZZEM  =  zm.  ZZOS  =  z's, 
ZZES  =  zs,  ZMON  =  ?m,  and  ZSOT  =  s',. 


procedure  and  approximations  as  in  the  preceding  section,  the  condition  for  an 
annular  solar  eclipse  is 

a  <  \ss  -  sm  +  ?rm  -  7f8h  (8.2421-2) 


which,  as  stated  before,  may  be  used  as  a  general  condition  for  any  central  solar 
eclipse.  If  ss  >  sm,  the  eclipse  is  total;  if  js  <  sm,  it  is  annular.  If  a  is  near  zero,  the 
eclipse  may  be  annular-total,  but  that  determination  requires  further  calculation. 


8.3    SOLAR  ECLIPSES 


Section  8.1  described  considerations  for  ephemerides  to  use  in  calculating  eclipses. 
Section  8.2  described  how  to  find  approximately  when  an  eclipse  of  any  kind  may 
occur.  This  section  describes  how  to  calculate  the  details  of  a  solar  eclipse. 


8.31    Fundamental  Equations:  Introduction 

Bessel  developed  the  method  used  to  calculate  and  describe  precisely  any  eclipse, 
based  on  using  a  coordinate  system  oriented  to  the  shadow  axis.  The  basic  steps  are: 
elements  are  calculated  in  the  Besselian  system  to  describe  geometrical  quantitites; 
the  observer's  position  is  transformed  to  Bessel's  coordinate  system;  equations  of 
condition  are  formed;  circumstances  are  derived  that  describe  the  time  and  place 
of  observable  events  or  conditions  in  the  Besselian  system;  the  circumstances  are 
transformed  back  to  topocentric  or  geocentric  coordinates. 


ECLIPSES  OF  THE  SUN  AND  MOON 


435 


NCP 


Taxis  by  tt  /  2  -  d  to  make  the  new  z-axis  parallel  to  the  shadow  axis. 


8.32   Besselian  Elements 

8.321    The  Fundamental  Coordinate  System:  Overview     To  use  Bessel's  method  for 

solar  eclipses,  the  geometric  position  of  the  shadow  of  the  Moon  w.th  respec  o 

the  Earth  is  described  in  a  coordinate  system  (Figure  8  321.1)  ^re^on^ 

of  coordinates  is  the  geocenter,  the  z-axis  is  parallel  to  the  axis  of 

positive  toward  the  Moon,  the  x-axis  passes  through  the  equator  and 

toward  the  east,  and  the  y-axis  is  positive  toward  the  north.  Thts  ^£JX 

tal  coordinate  system,  and  the  ^-plane  is  the  fundamental  plan.  The 

of  the  shadow  with  the  fundamental  plane  is  two  circles  concentnc  abou  ttaax». 

The  surface  of  the  Earth  moves  with  respect  to  this  plane,  because  the  Earth 

rotating  on  its  axis  and  moving  in  orbit. 


8.322    Calcn.ation  of  the  Besselian  E.ements:  Transformation  to  the  £ 
Coordinate  System  In  the  geocentric  equatorial  coordinate  ^ 
position  vector  of  the  Sun,  and  Rm  that  of  the  Moon.  Let  G  -  Rs  -  Rm 
collinear  with  the  shadow  axis.  In  astronomical  units, 


436 


EXPLANATORY  SUPPLEMENT 


|RS|  = 
Is 

rs  = 
rm  = 


Rs     Rs  sin  7rm ' 
G 

horizontal  parallax  of  the  Sun  at  mean  distance, 
cos  qs  cos  Ss 
sin  as  cos  <5S 
sin<5s 

cos  am  cos  <5„ 
sin  am  cos  <$„ 
sin  6m 


sin7r0 
Rs  sin  7r„ 


By  definition, 


(8.322-1) 


cos  d cos  a 

g  =  rs  -  rm  =  g    cos  dsina    ,  (8.322-2) 
sind 

where  (a,d)  is  the  geocentric  equatorial  right  ascension  and  declination  of  the  in- 
tersection of  the  shadow's  axis  with  the  celestial  sphere  (point  2). 

Recall  from  Section  8.321  the  fundamental  coordinate  system  (x,y,z)  whose  z- 
axis  is  parallel  to  the  shadow  axis,  or  to  g.  The  plane  z  =  0  is  the  fundamental  plane, 
the  *-axis  is  the  intersection  of  the  fundamental  plane  with  the  equator  (positive 
to  the  east),  and  the  y-axis  completes  the  triad  (positive  to  the  north). 

Hence, 

rmFund.  =  ^r— - Rj  (|  -  d)  R3  (fl  +  |)  rmGeoc,  (8.322-3) 

in  units  of  earth  radii.  (R|  and  R3  are  standard  rotation  matrices,  positive  direction, 
about  the  jr-axis  and  z-axis,  respectively.) 

In  the  (x,y,z)  system,  let  the  unit  vectors  be  i,  j,  and  k.  Then 

g  x  k  =  0, 
g  ■  i  =  0, 

g -j=o, 

cos  d  cos  a 

cos  d  sin  a    ,  (8.322-4) 
sin<i 


k  = 


and  the  orthogonal  unit  vectors  are 


—  sin  a ' 

"  —  cos  a  sin  d~ 

i  = 

cos  a 

j  - 

—  sin  a  sin  <i 

.    o  J 

cosd 

(8.322-5) 


/  ecL|psES  OF  THE  SUN  AND  MOON  437 

By  working  out  Equation  8.322-3  or  by  resolving  the  lunar  position  vector  into 
conipoiients  using  Equation  8.322-5, 


rmFund  — 


Sin  7Tm 


cos  6m  sin(ara  -  a) 
sin  6m  cos  d  —  cos  <5m  sin  d  cos(am  -  a) 
sin  <5m  sin  d  +  cos  <5m  cos  d cos(om  -  a)  _ 


(8.322-6) 


(X,y)  are  the  coordinates  of  the  intersection  of  the  axis  of  the  shadow  with  the 
fundamental  plane. 

In  presenting  Besselian  elements  of  eclipses  for  practical  use,  the  right  ascension 
a  of  the  point  Z  is  conventionally  replaced  by  the  Greenwich  hour  angle  (i  of  that 
point,  given  by 

fi  -  Greenwich  apparent  sidereal  time  -  a. 


In  practical  calculation,  the  Greenwich  sidereal  time  is  evaluated  according  to  the 
precepts  given  in  Chapter  2. 


8.323  Parameters  of  the  Shadow  Cone  The  radii  of  the  umbra  and  penumbra  on 
the  fundamental  plane  can  be  easily  calculated  given  the  generating  angle  of  each 
cone,  and  the  perpendicular  distance  of  each  vertex  from  the  fundamental  plane. 
Refer  to  Figures  8.323.1  and  8.323.2  for  the  plane  geometry  of  a  cross  section  of  the 
cone.  This  geometry  relates  the  desired  quantities  to  the  known  size  and  separation 
of  the  bodies. 


From  Figure  8.323.1, 


.  ,  ds+da 
sin/i 


sin/2=^_^.  (8.323-1) 
gR* 

To  transform  to  units  of  Earth  equatorial  radii  (see  Figure  8.323.2), 
de  =  1  =Kssin7rs, 

c;„ .  (8.323-2) 
sinss  sinio 

d,      =  if,  sin  ss  -  —  =  —  , 

sin  tts     sin  7r0 

where  tts  =  7To  /  Rs,  ss  =  s0  /  Rs-  For  the  Moon,  set 


dm  =  k  earth  radii,  where  k-dm/de. 


(8.323-3) 


Fundamental  plane  "  

/, 

Figure  8.323.1 

of ;shad°w  cones  ^  'he  Besselian  fundamental  reference  system.  The  Sun  is  centered  at 

M  with ™  h    Semid'ameteur  *-  at  heiSh'  *  above  the  fundamental  plane.  The  Moon  is  centered  at 

Lush  SSl  £  at  hf'!ht  \  =  z  above  the  *""^amental  plane.  The  fundamental  plane, 

enarftion  hHno  /tk     '      ^  °bserver's  Plane  a«=  perpendicular  to  the  axis  through  SM,  the 

/  SXIh  ™    iT  ,  pem,mhra  h3S  i,S  Vertex  V>  at  heiSht  f'  above  the  fundamental  plane,  radius 

Sub  SnH  rZ  f  P    e>  u  1  VhC  0bSerVer'S  P'ane'  Vert"  an^le  h  ■  Similarly  for  the  umbra. 
tauDscnpt  1  refers  to  penumbra,  2  to  umbra.) 


/  ECLIPSES  OF  THE  SUN  AND  MOON 
Sun 


439 


Figure  8.323.2 

Relationships  among  angular  semidiameter  s,  apparent  semidiameter  d,  and 
parallax  7r.     is  expressed  in  Earth  radii. 


Then 


de  =  1  =  Rm  sin  7rn 


dm=k  =  Rm  sin  sm  = 


sin  sm 
sin  nm ' 


(8.323-4) 


Let  R  =  R.  sin  7T(>  be  the  distance  to  the  Sun  in  astronomical  units.  Substituting 
Equations  8.323-2  through  8.323-4  into  Equation  8.323-1  and  reducing  yields 


sin  /]  =  (sin  s()  +  k  sin  tt0)  /  gR, 
sin  fj  =  (sin  s0  -  k  sin  7r0)  /  gR. 


(8.323-5) 


Thp  numerators  are  evaluated  using  adopted  values  for  k,  sq,  and  7rn.  Equations 
8.322-1  and  8.322  2  give  g,  and  R  is  from  the  solar  ephemeris. 

The  distances  C\,  C2,  of  the  vertices  of  the  penumbral  and  umbral  cones  above 
the  fundamental  plane  are  shown  in  Figure  8.323.1.  Figures  8.323.3  and  8.323.4 
show  that 


c\  =  z  +  /ccosec/i, 
C2  =  z  —  fccosec/i, 


(8.323-6) 


and  hence  the  radii  <i ,  I2  of  the  penumbra  and  umbra  on  the  fundamental  plane  are 
obtained  from 


/,  =cj  tan/,, 
I2  =  C2tan/2. 


(8.323-7) 


440 


EXPLANATORY  SUPPLEMENT 


Figure  8.323.3 

Vertex  angle  of  the  penumbra,  detail  from  Figure  8.323.1,  sin/,  =  dm  I  (c\  -  z). 


M 


Figure  8.323.4 

Vertex  angle  of  the  umbra,  detail  from  Figure  8.323.1.  sin/2  =  dm  I  (z  -  c2). 


The  quantities  z,  k,  c\,  c2,  h,  and  l2  are  in  units  of  Earth  radii.  The  convention  of 
signs  introduced  in  Equation  8.323-6  makes  l2  negative  for  total  eclipses— i.e.,  the 
vertex  is  below  the  fundamental  plane.  For  annular  eclipses,  l2  is  positive,  and  of 
course  /[  is  always  positive. 

8.324  Summary  of  Besselian  Elements  The  quantities  x,  y,  siad,  cosrf,  fi,  h,  fe> 
lan/i,  tan/2,  A,  and  d  are  conventionally  designated  as  Besselian  elements.  (N-B. 
It  is  conventional  in  almanacs  to  use  the  notation  (/>',  d!  for  the  derivatives  with 
respect  to  time.)  In  the  publications,  the  first  seven  quantities  are  tabulated  as  a 
function  of  time  at  a  short  interval,  or  may  also  be  given  as  a  low-order  polynomial 
as  a  function  of  time.  The  remaining  four  quantities,  to  the  precision  required,  are 
constant  for  the  entire  eclipse  and  are  given  at  the  conjunction  value.  Using  all 
these  quantities,  the  size  and  orientation  of  the  shadow  cone  with  respect  to  the 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  441 

surface  of  the  Earth  and  the  fundamental  plane  may  be  calculated  for  any  instant 
during  the  eclipse. 


8325  A  Note  on  Practical  Calculation  In  practice,  using  a  large-memory 
computer>  one  begins  the  computation  by  constructing  short  ephemerides  of  the 
Sun  and  the  Moon  from  the  desired  source,  at  a  convenient  interval,  say,  one  hour, 
and  then  subtabulates  to  smaller  intervals  as  desired.  However,  it  is  possible  with 
some  ephemerides  stored  in  polynomial  form  to  take  the  beginning  ephemeris  di- 
rectly at  the  desired  interval.  This  directness  is  especially  helpful  in  calculating 
points  of  curves  near  the  beginning  and  end  of  a  central  solar  eclipse. 

Initially,  for  each  eclipse,  calculations  are  carried  out  using  a  ten-minute  time 
interval,  but  for  some  instances  additional  calculations  at  an  interval  of  30  seconds  or 
less  are  necessary.  In  all  instances,  the  Besselian  elements,  derivatives,  and  auxiliary 
quantities  are  calculated  from  the  ephemeris  entries  and  carried  as  an  array;  none  is 
assumed  to  be  constant,.  Derivatives  are  taken  numerically.  Most  quantities  change 
so  slowly  that  only  a  low-order  scheme  is  required. 


8.33  Coordinates  of  the  Observer 


8.331  Geocentric  Position  Consider  an  observer  located  on  the  surface  of  the  Earth 
in  longitude  A,  at  geocentric  latitude  4>\  and  at  a  distance  p  from  the  center  of  the 
terrestrial  spheroid.  The  longitude  is  not  now  corrected  for  AT  and  is  considered 
positive  east  (right-handed  system).  Careful  attention  must  be  paid  to  algebraic 
signs  (see  Figure  8.331.1).  In  the  y-,  z-axes  of  the  fundamental  plane  system,  in 
units  of  the  Earth's  equatorial  radius,  let  the  observer's  position  vector  be 


Pf  = 


(8.331-1) 


In  the  geocentric  equatorial  system,  let  the  observer's  position  be 


COS  1 


PC  =  P 


b'  cos  A " 
cos  4>'  sin  A 
sin  <b' 


(8.331-2) 


The  transformation  to  the  fundamental  system  is  very  similar  to  that  of  Equa- 
tion 8.322-3: 

PP  -Ri  (f  -  d)  R3  (-  (n  -  f  ))  Pc  (8-331-3) 


It  is  convenient  to  use  the  local  hour  angle  in  further  calculations.  Because  by 
current  convention  the  Greenwich  hour  angle  (p)  and  longitude  (A)  are  measured 
in  opposite  directions,  the  local  hour  angle  (0)  is 

8  =  V  +  X.  (8.331^) 

Applying  Equation  8.331  3  to  Equation  8.331-2,  combining  terms  by  multiple-angle 
formulas,  substituting  Equation  8.331-4,  and  resolving  the  components  along  the 
unit  vectors  gives 

i  =  pcos  4>'  sin  8, 

V  =  psintp'  cosd  -  pcos^'shWcosfl,  (8.331-5) 
C  =  psin 4>' s'md+  pcos 4>  cos  </ cos 0. 


9  /  ECLIPSES  OF  THE  SUN  AND  MOON  443 

8.332  Geocentric  Velocity  It  will  also  be  necessary  to  know  how  the  observer  is 
moving  with  respect  to  the  fundamental  plane.  The  components  of  the  motion  are 
rotations  about  the  same  two  axes  used  in  the  coordinate  transformation:  rotation 
about  the  polar  axis  of  the  Earth  because  of  both  the  rotation  of  the  Earth  and 
the  motion  of  the  Moon,  and  about  the  axis  pointing  to  the  equinox  because  of  the 
motion  of  the  Moon.  In  the  geocentric  rectangular  equatorial  system,  the  rotation 
vector  is 


Transforming  to  the  fundamental  plane, 


(8.332-1) 


wF  =  Ri  {jj  -  d]  u>G  = 


pcosd 
{isind 


(8.332-2) 


The  velocity  of  the  observer  with  respect  to  the  fundamental  plane  is 

pF  =  wF  x  p¥  =  R]  ^  -dju>cx  Pv 
The  operation  o;p  X  may  be  expressed  as  a  matrix  premultiplier: 


(8.332-3) 


H  =  [d}x>  U?y,  U!z]  — 

Substitution  of  Equation  8.332-4  into  Equation  8.332-3  yields 


0         —  psind  pcosd 
psind        0  -d 
-pcosd        d  0 


(8.332-4) 


Pf  =  ftp?  = 


p(-rjsind  +  (cosd) 
p£  sin  d  —  dC, 
—pt£  cosd  +  dr) 


(8.332-5) 


8.333    Coordinates  of  Observer  with  Respect  to  the  Fundamental  Plane,  Corrected 

for  Flattening  Consider  a  spheroid  of  ellipticity  e.  Geodetic  positions  are  specified 
on  the  surface.  Calculations  of  eclipse  tracks  in  the  fundamental  plane  are  no  prob- 
lem, nor  are  local  circumstances  for  a  given  point.  However,  in  translating  any 
point  from  the  fundamental  plane  to  the  surface  of  the  spheroid,  evaluation  of  C 
requires  knowing  p,  the  distance  of  any  point  from  the  center  of  the  Earth.  This 
distance  is  a  function  only  of  latitude,  so  that  £  could  be  determined  by  successive 
approximation. 

However,  Bessel  devised  a  procedure  to  provide  a  direct  computation  of  £  from 
£1  V-  This  procedure  requires  a  set  of  auxiliary  Besselian  elements,  based  on  the 
Besselian  element  d  and  the  ellipticity  e  of  the  spheroid. 


444 


EXPLANATORY  SUPPLEMENT 


Let  a  and  b  be  the  equatorial  and  polar  radius,  respectively,  of  the  spheroid 
Then 


flattening,  /  =  - — -,  and 
a 

ellipticity,  e  =  (1  -  b1 1  a2)112. 


(8.333-1) 


Define 


C=(l-e1sin2<P)-m, 


S  =  (l-e2)C; 


or 


C  =  (cos2  0  +  (1  -  f)2  sin2  4>rvl,       S  =  (l  _  ffc. 


(8.333-2) 


The  relations  between  geocentric  latitude  <f>'  and  geocentric  distance  of  observer  a 
and  geodetic  latitude  0  are 

psin  <f>'  =  Ssin<f> 

pcos<j>'  =  Ccos0.  (8,333-3) 
To  eliminate  p  and  0',  transform  to  a  parametric  latitude  0i,  defined  by: 

.  . ,  cos  <b 

V»4n=P*»*  =(1_e2sin2^}1/2"Ccos^  (8-333-4) 

Then,  from  Equations  8.333-2,  8.333-3,  and  8.333-4, 


sin  ^.j  =(1  -cosVi)"^  = 


(1  -e2)"2' 


Inversely, 


pcos  0'  ~  cos  if>\  =Ccos4>, 
psin0'  =  (1  -e3)1/2sin<Ai  sSsin0. 


(8.333-5) 


(8.333-6) 


Substituting  into  Equation  8.331-5, 
£  =  cos  <f>[  sin  (9, 


rj  =  sin  4>  ]  ( 1  -  e2 ) 1/2  cos  d  -  cos  <f>  i  sin  d  cos  9, 
C  =  sin0i(l  -  e2)1/2sinrf  +  cos0,  cos d sin  0. 


(8.333-7) 


Now  to  eliminate  the  terms  in  d  and  e,  define 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON 

in  17: 


445 


in  0 


Then 


Define 


sind  -  pi  sind| , 
(1  -  e2)1/2cosrf  =  pi  cos^i, 

(1  -  <?2)1/2  sind  =  p2  sind2, 
cost/  =  p2  cosd2. 


£  =  cos0i  sin#, 
iji  is  fj  j  pi  =>  sin  4>\  cost/i  —  cos  <f>\  sin  if  1  cos  8, 

C  -  Msin  0i  sin  d2  +  cos  4>\  cos  ffc  cos  0). 


(8.333-8) 


After  extensive  algebraic  manipulation  and  reduction,  this  becomes 


(8.333-9) 


(8.333-10) 


(8.333-1  1) 


Q  =  sin  0i  sint/j  +  cos0]  cosd]  cos#. 

It  is  desirable  to  eliminate  0i  and  6.  Then  Equation  8.333-9  combined  with  Equa- 
tion 8.333-11  may  be  written 


"  cos  0i  sin  (9  " 

m 

sin  0i 

A. 

cos  0|  cos  9  _ 

Hence, 


'  cos  0i  sin#  " 

T 

sin  0i 

=  Ri(rfi) 

m 

cos  0i  cos  9 _ 

(8.333-12) 


(8.333-13) 


Apply  components  of  Equation  8.333-13  to  the  expression  for  C  in  Equation  8.333  9 
and  reduce  to  obtain 


C  =  p2[G  cosCrfj  -  d2)  -  m  sinWi  -  d2)l  (8.333-14) 

8.334  Auxiliary  Besselian  Elements  and  Summary  The  following  defined  quanti- 
ties are  part  of  a  set  known  as  auxiliary  dements;  more  are  defined  in  Section  8.3422. 
These  elements  are  used  to  introduce  the  flattening  of  the  Earth  into  the  eclipse 
calculations.  All  quantities  are  in  units  of  Earth's  equatorial  radius. 


446 


EXPLANATORY  SUPPLEMENT 


pi  s(l  -e2cos2d)m, 
P2  =  (1  -e2  sin2  d)ia, 
sin^i  =  sin  J/ pi, 
cos  rf|  =  ( 1  -  e2)"2  cos  d  I  p\ , 
sin(c?i  -  (I2)  =  e2  sinrfcosc//  pyp2, 
COS(rf,  -<fe)a(]  -e2)1/2/plP2. 


(8.334-1) 


(The  subscripts  do  noi  refer  to  the  umbra  and  penumbra.)  In  computation,  all  these 
quantities  are  carried  with  the  regular  elements  at  the  same  interval,  even  though 
pi,  P2,  and  (d\  -  di)  are  nearly  constant  for  the  duration  of  the  eclipse.  Once  the 
elements  are  available  and  a  point  (£,  T),0)  is  given  in  the  fundamental  plane,  then 
4>  and  Q  are  obtained  as  follows:  point  (£, t?i,Ci)  is  calculated  from  the  definitions 
of  ?7i  and  Ci  in  Equations  8.333-9  and  8.333-10.  Next,  Equation  8.333-13  gives  fa 
and  9;  Equation  8.333-6  gives  fa  and  Equation  8.333-14  or  8.333-7  gives  £. 

8.34   Conditional  and  Variational  Equations 

8.341  Introduction  This  section  establishes  conditions  by  which  eclipse  phenom- 
ena may  be  distinguished  and  calculated. 

8.342  Conditions  Defining  General  Circumstances  and  Curves  Consider  now  the 
relation  between  observer  and  shadow.  We  have,  in  the  fundamental  plane  reference 
system,  the  geocentric  position  of  the  observer  p  =  (£,  77, 0.  The  geocentric  position 
of  the  intersection  of  the  shadow  axis  with  a  plane  through  the  observer  parallel  to 
the  fundamental  plane  is 

Fx~ 


r  - 


(8.342-1) 


Now  define  the  vector  in  the  observer's  plane  from  observer  to  shadow  axis  as 

A  =  r  -  p.  (8.342-2) 

In  the  plane  though  the  observer,  let  Q  be  the  position  angle  of  the  axis,  measured 
from  north  through  east,  so  that  the  unit  vector 


A  = 


sing 
cos  Q 
0 


(8.342-3) 


The  radius  (L)  of  the  shadow  at  height  f  above  the  fundamental  plane  is 


L  =  /-Oan/, 


(8.342-4) 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  447 

subscripted  for  umbra  or  penumbra,  and  L  may  be  positive  or  negative. 


g  3421  Equations  of  condition  We  may  now  impose  geometric  and  dynamic  con- 
ditions in  order  to  calculate  eclipse  phenomena.  We  know  r.  We  may  consider  two 
cases  from  Equation  8.342-2:  one,  in  which  p  is  not  known  but  we  wish  to  find  the 
locus  of  all  points  satisfying  a  condition  as  a  function  of  time  (curve);  the  other,  in 
which  p  is  fixed  and  we  want  the  times  of  significant  configurations  (circumstances). 

Much  of  the  following  discussion  applies  to  either  case,  the  difference  being  the 
choice  of  knowns  and  unknowns.  First,  consider  the  more  general  cases,  in  which  p  is 
not  known.  The  discussion  applies  to  both  umbra  and  penumbra,  so  the  subscripts 
are  omitted. 

If  the  observer  is  on  the  edge  of  the  shadow  (penumbra  or  umbra)  or,  more 
generally,  the  surface  of  the  shadow  cone,  the  eclipse  is  either  beginning  or  ending. 
This  surface  location  may  be  defined  by  imposing  the  geometric  condition 

\A\  =  \L\,       or    A-A-L2  =  0.  (8.3421-1) 

Consider  Equation  8.3421-1  now  as  a  general  expression  that  can  be  evaluated  at 
any  instant.  The  equation  has  two  roots.  If  they  are  imaginary,  then  the  observer  is 
outside  the  shadow.  If  they  are  equal,  then  the  eclipse  is  simultaneously  beginning 
and  ending  i.e.,  "grazing"— and  the  observer  is  on  either  the  northern  or  southern 
limit  of  the  shadow.  This  limit  may  be  defined  by  imposing  the  dynamic  condition 

—(A  ■  A  -  L2)  =  0, 
at 

or 

A-A-ZX  =  0.  (8.3421-2) 

Since 

|A|  =  |L|,    this  reduces  to  A  •  A  -  L  =  0.  (8.3421-3) 
It  is  always  the  case  that  df  I  dt  =  0  for  /,  and  f2,  so  it  is  sufficiently  accurate  to  use 

L  =  /-Ctan/, 

In  Equation  8.3421-3,  substitute 


A  =  r  -  p, 

p=WFXpF  =  wFx(r-  A), 


448 

to  get 


A  ■  r  -  A  ■  (wF  x  (r  -  A))  +  tan/wz  •  (r  •  A)  -  I  =  0 
In  the  second  term, 


EXPLANATORY  SUPPLEMENT 

(8.3421-5) 


A  •  (wF  x  (r  -  A))  =  A  •  (a>F  x  r). 


(8.3421-6) 


From  Equation  8.332-4: 


"  0 

-fismd 

ficosd" 

~  x~ 

us  x  r  = 

fi  sin  d 

0 

-d 

y 

—fi  cos  d 

d 

0 

X. 

=  V- 


— y  sin  d+  (,cosd 
x  sin  d  —  C,d  I  fi 
_  -xcosd  +  ydl  fi 


"  —y  sin  d ' 

—ficosd 

xsv&d 

-c 

d 

_  —xcosd_ 

.  -ydK  . 

(8.3421-7) 


From  Equations  8.332-2,  8.332-4,  and  8.3421-1: 


"  d  ' 

ficosd' 

Wp  - 

ficosd 

0 

_  ft  sin  d  _ 

0 

A  =  A(/-Ctan/). 


(8.3421-8) 


Substitute  these  and  Equations  8.3421-1,  8.3421-6,  8.3421-7  into  Equation  8.3421-5 
and,  through  algebraic  manipulation,  collect  terms  as  factors  of  A-  and  (  to  obtain 


"  — y  sin  d ' 

x  sin  d 

-  /tan/w,  j 

—xcosd^ 

-  1+ tan M  ■  r  =  0.  (8.3421-9) 
Equation  8.3421-9  may  be  written  in  component  form  as: 


sin  Q 
cos  Q 
0 

+  Csec2/ 


x 

y 
LC. 

sin  2 
cos  g 
0 


ys\nd 
—x  sin 
jccos<i 

■ficosd 
d 
0 


/tan/ 


/  +  tan  / 


—ficosd 
d 
0 

—ficosd 
d 
0 


(8.3421-10) 


T  r  I 

X 

y 


=  0. 


"  sin  Q 

T 

C 

'  sin  Q ' 

r 

"  —ficosd 

cos<2 

-b 

+  (  sec2  / 

cos  Q 

d 

0 

.  0  _ 

0 

0 

a  /  ECLIPSES  OF  THE  SUN  AND  MOON  449 

g  3422  Additional  auxiliary  elements  With  a  large  computer,  Equation  8.3421-10 
niay  be  used  in  this  form  to  find  combinations  of  (,  Q  that  satisfy  it,  and  hence 
the  limiting  curves.  For  efficiency,  however,  it  is  conventional  to  define  auxiliary 
quantities  a,  b,  c  with  derivatives  a,  b,  c,  there  being  a  separate  set  for  umbra  and 
penumbra  as  distinguished  by  subscripting  and  use  of  the  corresponding  angle  /, 
such  that 


+  d  =  Q.  (8.3422-1) 


Thus,  to  make  Equation  8.3421-10  identical  to  Equation  8.3422-1, 
a  =  —I  —  fvccosdtanf  +  _yc?tan/, 

b  =  -y  +  fvcs\nd  +  Wtan/,  (8.3422-2) 
c-k    +jj,ysmd         + 1  ft  tan  /  cos  d. 

In  older  references,  the  approximations  d  tan  ft  =  0,  sec2  /,■  =  1  are  used,  which  are 
reasonable  and  adequate  for  limited  computer  resources. 
Now  collect  terms  in  sin  Q,  cos  Q: 

a  +  sin  Q(c  -  fi(  cos  d sec2  f)  +  cos  Q(-b  +  Qd sec2  f)  =  0.  (8.3422-3) 

Multiply  by  sec  Q  to  obtain 

c  —  fi\  sec  J  cos  d 

The  application  of  this  fundamental  equation  to  calculate  limits  of  the  shadows  will 
be  described  in  Section  8.355.  In  calculations  for  The  Astronomical  Almanac,  the 
auxiliary  quantities  are  calculated  along  with  the  Besselian  elements  and  carried  in 
an  array  as  a  function  of  time. 

8.343  A  Note  on  Practical  Calculation  The  Besselian  elements,  both  regular  and 
auxiliary,  are  nearly  linear  in  behavior  during  an  eclipse,  such  that  integration 
or  numerical  differentiation  seldom  requires  more  than  a  third-order  Lagrangian 
scheme,  and  linear  interpolation  is  often  adequate.  In  preparing  computer  programs 
and  carrying  elements  in  an  array,  however,  it  is  always  necessary  to  be  sure  that 
angular  quantities  change  monotonically,  especially  when  passing  through  360° .  It 
is  also  necessary  to  carry  enough  entries  at.  the  beginning  and  end  of  the  eclipse  to 
allow  interpolation,  but  not  so  many  that  the  behavior  of  the  tabulated  elements 
accelerates  or  reverses  and  potentially  creates  specious  extrema. 


450  EXPLANATORY  SUPPLEMENT 

Even  though  in  calculations  for  The  Astronomical  Almanac  all  quantities  are 
carried  in  double  precision  (15-16  digits),  the  published  data  should  be  considered 
accurate  only  to  the  number  of  significant  figures  presented. 


8.35   Calculation  of  General  Solar  Eclipse  Phenomena 

8.351  Introduction  The  Besselian  and  auxiliary  elements  are  the  basis  of  calcu- 
lating all  further  phenomena  associated  with  each  eclipse,  utilizing,  of  course,  the 
necessary  ephemeris  data  given  in  the  eclipse  section  or  elsewhere  in  The  Astronom- 
ical Almanac.  The  Eclipse  section  also  gives  positions  on  the  surface  of  the  Earth 
as  a  function  of  time,  where  well-defined  phases  or  phenomena  occur  according  to 
certain  geometric  or  dynamical  conditions— e.g.,  geocentric  beginning  and  end  of 
each  phase.  These  data  are  given  in  tabular  and  graphical  form,  and  are  known 
as  general  circumstances,  elements  of  the  eclipse,  and  curves  of  several  kinds.  The 
independent  variable,  unless  stated  otherwise,  is  Universal  Time.  Conversely,  for  a 
given  imposed  condition,  a  time  may  be  either  deduced  or  assumed,  and  the  coordi- 
nates (£,  n,Q)  determined.  Using  the  auxiliary  elements  pi,  P2,  d\,  d2,  the  quantities 
C  and  (f,77i,Ci)  may  be  calculated  and  then  transformed  to  A,  &,  4>i,4>-  General  cir- 
cumstances are  usually  calculated  before  the  curves,  but  for  purposes  of  exposition, 
calculation  of  the  curves  is  described  first. 

Eclipse  curves  are  the  loci  of  points  on  the  spheroid  of  the  Earth  at  some 
specified  radius,  usually  the  surface.  These  curves  delineate  set  boundary  conditions, 
and  hence  define  areas  within  which  certain  eclipse  phenomena  are  visible;  they  also 
show  time  of  occurrence.  They  are  produced  by  going  through  a  table  of  Besselian 
elements  as  a  function  of  time,  calculating  a  table  of  derived  discriminants,  and 
evaluating  whether  imposed  criteria  are  satisfied. 

General  circumstances  (as  opposed  to  local  circumstances)  are  individual  points 
and  times  at  which  extrema  of  the  curves  occur  on  the  spheroid  of  reference. 


8.352  Basic  Geometry  In  general,  eclipse  phenomena  are  treated  and  calculated 
using  the  fundamental  triangle  in  the  fundamental  plane  shown  in  Figure  8.352.1. 

By  imposing  various  conditions  and  finding  corresponding  points  in  the  funda- 
mental plane,  it  is  then  but  a  relatively  easy  step  to  project  the  point  to  the  surface 
and  convert  to  latitude  and  longitude  as  described  in  Section  8.33. 


8.353  Relationships  The  fundamental  relationship  of  the  geocenter  (0,0),  the  pro- 
jected axis  of  the  shadow  (x,y),  and  the  projected  position  of  the  observer  (6  *7)  1S' 

p  =  m-A.  (8.353-D 


j  ECLIPSES  OF  THE  SUN  AND  MOON 


451 


Figure  8.352.1 

Relationship  between  rectangular  and  polar  reference  systems  with  the  origins  at  the 
geocenter  or  the  observer's  projected  point,  in  the  fundamental  reference  plane.  Angles  are 
measured  from  the  north,  or  y-axis.  In  the  geocentric  system,  the  observer's  projected  point 
may  be  specified  as  (£,  n)  or  (p,  7);  the  shadow  axis  intercept  may  be  specified  as  (x,  y)  or 
(m,M).  In  the  reference  system  centered  at  the  observer's  projected  point,  the  position  of  the 
shadow  axis  intercept  is  (x  —  £,y  —  n)  or  (A,  Q). 


!  derived  in  Section  8.3421,  if  the  point  of  the  observer  is  "tangent"  to  the  path  of 
the  shadow,  such  that  the  eclipse  is  beginning  and  ending  simultaneously,  then  the 
second  fundamental  relation,  which  is  a  condition  on  Q,  is  (from  Equation  8.3422-3) 

a,  -  bi  cos  Q  +  a  sin  Q  +  C(  1  +  tan2  /,-)(<* cos  Q  -  p  cos  d sin  0  =  0,       i  =  1  or  2. 

(8.353-2) 

P  is  usually  not  unity;  it  contains  flattening  and  height  above  the  geoid. 
These  relationships  are  also  used: 


'  x  -  A  sin  Q 

psin  7 

_v  _ 

y  —  A  cos  Q 

pcos  7 

(8.353-3) 


452  EXPLANATORY  SUPPLEMENT 

Furthermore,  the  cosine  law  for  plane  triangles  (dot-product)  gives 

A  A  =  (m  -  p)  (m  -  p)  <=>  cos(7  -  Af)  =  -  , 

Imp 

m2  +  A~  —  o2 

p  ■  p  =  (m  -  A)  ■  (m  -  A)  <=>  cos(0  —  M)  =  - —       ^  ,  (8.353-4) 

2m  zi 

m  ■  m  =  (p  + A)  ■  (p  +  A)    <=>  sin(7  -  0)  =  -  . 

2Ap 

The  sine  law  for  planar  trigonometry  (cross-product)  gives 

m  x  A  =  kZi(jccos  Q-y  sin  Q) 

=  kAm  $in(Q  -  M), 
pxA  =  (m-A)xA  =  mxA 

=  kpzlsin(7  -  0.  (8.353-5) 

Another  useful  relation  is 

„  .  i  1        .  _     ,  .       .„     (I  —  m  +  p)(l  +  m  —  p) 

2  sin-  -(7  -  M)  =  1  -  cos(7  -  jW)  =  -  ^  ^.  (8.353-6) 

2  2wp 

8.354  Flattening  Flattening  is  taken  into  account  by  altering  p  and  7  slightly  to 
rp  and  7'.  Assume  that  £2  +  ??2  +  C?  =  r\  Now  if  Ci  =  0,  then  £2  +  ?>2  =  12.  Let 

£,  =  rpsin7  =  rsin7', 

^  =  rp  cos  7  =  rp]  cos  7',  (8.354-1) 
771  =  77 / pt     -  /-COS7'. 

Then 

tan7'  =  ^/ni  =  p,f  /t?  =  pi  tan 7,  (8.354-2) 

and 

sin  7'            cos  7'  ,0  **ax\ 

—  =p  =  p}  .  (8.354-J) 

sin  7  cos  7 

The  following  iterative  procedure  accounts  for  flattening.  Ordinarily,  three  itera- 
tions are  sufficient,  for  each  of  ±  (7  -  m). 

To  start,  assume  |p|  =  ],  where  p  =  |f, r)\  from  Equation  8.353-3  and  Fig- 
ure 8.352.1 


(a)        sin  7  =  £  /  p,    cos  7  =  n  I  p; 


g  /  ECLIPSES  OF  THE  SUN  AND  MOON  453 

(b)  tan 7'  =  p[  sin 7 /cos 7; 

(c)  7'  =  tan"  '(tan  7'); 

(d)  p  =  sin  7'  /sin  7.  (8.354-4) 

Repeat  the  steps  of  Equation  8.354-4  three  or  more  times,  until  convergence. 
Then  £  =  sin  7',  -rj\  =  cos  7'  (and  Ci  =0). 


8.355  Curves  The  order  in  which  curves  are  computed  is  not  important:  compu- 
tations are  all  done  independently  from  the  tabulated  elements.  However,  it  helps 
to  leave  computation  of  the  outline  curves  until  last. 

8.3551  Rising  and  setting  curves  An  observer  who  is  at  a  point  of  intersection  of 
the  penumbral  cone  with  the  fundamental  plane  is  also  on  the  sunrise/sunset  ter- 
minator and  may,  weather  permitting,  see  partial  eclipse  beginning  or  ending  at 
sunrise  or  sunset.  The  locus  of  all  such  points  on  the  Earth's  surface,  known  as  the 
rising  and  setting  curve,  is  shown  graphically  on  eclipse  maps  in  The  Astronomical 
Almanac  with  the  label  Eclipse  begins  at  sunrise,  Eclipse  ends  at  sunset,  and  so  on. 

The  rising  and  setting  curve  is  the  locus  of  end  points  of  the  outline  curves  for 
the  penumbra  as  it  intersects  the  terminator.  At  a  selected  instant,  there  are  two 
points  on  the  curve  or  no  points.  If  there  are  two  points,  each  belongs  to  one  of  two 
series.  For  a  succession  of  instants,  the  two  series  of  points  trace  different  branches 
of  the  same  curve  and  are  joined  at  first  contact  (penumbra  emerges  from  the 
terminator  and  intersects  the  Earth's  surface)  and  last  contact  (penumbra  merges 
completely  into  the  terminator  and  leaves  the  Earth's  surface).  The  track  of  the 
penumbra  always  generates  at  least  one  limit  curve  (Section  8.3553),  either  northern 
or  southern,  but  if  both  the  northern  and  southern  limits  exist  for  an  interval  of  t  ime 
(i.e.,  the  central  path  is  in  equatorial  regions),  then  during  that  interval  the  rising 
and  setting  curve  does  not  exist — the  penumbral  shadow  is  completely  emerged 
from  the  terminator.  The  result  is  that  the  rising  and  setting  curve  forms  two 
separate  loops  like  elongated  teardrops,  each  loop  being  generated  in  two  segments. 
Otherwise,  if  there  is  only  one  limiting  curve,  then  the  loops  are  joined,  and  the 
curve  of  rising  and  setting  forms  a  distorted  figure-eight.  In  either  case,  one  loop 
or  lobe  is  for  rising,  the  other  for  setting.  In  a  series  of  similar  eclipses,  both  forms 
occur.  When  the  first  separation  of  the  loops  occurs  in  the  series,  the  break  into 
separate  loops  does  not  occur  at  the  apparent  node,  but  near  it. 

In  the  fundamental  plane,  the  circle  of  the  penumbral  cone,  at  any  instant, 
intersects  the  surface  of  the  Earth  in  no  points  or  in  two  points  (which  may  occa- 
sionally be  coincident).  In  the  fundamental  triangle, 


£  =  0,    A  -  l[       are  imposed  conditions. 


(8.3551-1) 


454  EXPLANATORY  SUPPLEMENT 

If  Rj  is  the  matrix  for  positive  rotation  about  the  z-axis,  then 


p=-R?(+(j-Af))m. 
m 


(8.3551-2) 


R.  = 


cos(±  (7  -  AO) 
^  sin(±  (7  -  AO) 
0 


±sin(±(7-A0)  0 
cos(+  (7  -  AO)  0 
0  1 


(8.3551-3) 


where  one  uses  all  top  signs  or  all  bottom  signs. 

If,  by  the  cosine  law  (Equation  8.353-4),  cos2[±  (7  -  m)]  <  0,  then  there  are  no 
points  on  the  curve  for  the  selected  instant. 


8.3552  Curves  of  maximum  eclipse  in  the  horizon  Any  locus  of  points  that  satisfies 
the  fundamental  relation  given  in  Equation  8.353-2  (a  dynamic  constraint)  is  a 
curve  of  maximum  eclipse.  If  the  geometric  conditions  are  also  imposed  that  £  =  0, 
A  =  l\,  then  we  have  the  curve  of  maximum  eclipse  at  sunrise  or  sunset,  or  maximum 
eclipse  in  the  horizon.  On  the  map  this  curve  approximately  bisects  the  lobes  of 
the  rising  and  setting  curves.  It  is  continuous  if  the  rising  and  setting  curves  are 
joined,  otherwise  not.  It  is  also  generated  in  two  branches,  as  are  the  rising  and 
setting  curves. 

From  Equation  8.353-2, 

<  =  u 

a  1  -  b\  cos  Q  +  cp  sing  =  0>  (8.3552-1) 

and  from  Equation  8.353-5, 

pxA  =  mxA=>  psin(7  -  Q)  =xcos  Q  -  y  sing.  (8.3552-2) 

From  Equation  8.3552-1  find  two  values  of  Q,  then  for  each  find  a  value  of  7,  then 
7'  as  before  (Equation  8.354-4). 

Points  exist  on  these  curves  only  if  both  these  conditions  are  satisfied: 


sin(7-0  <  1, 

(x-02  +  (y-ViPif  <l\- 


(8.3552-3) 
(8.3552-4) 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  455 

8.3553  Central  line,  duration  of  central  eclipse,  and  width  of  path  The  cent  ral  line 
is  the  locus  of  the  points  of  intersection  of  the  axis  of  the  shadow  with  the  surface 
of  the  Earth.  The  following  conditions  must  be  satisfied: 

p  ■  m  =  pm, 
pxm-0, 

?  =x,  7)  =  y,  171  =yl  p\, 

C2  +  ^  +  Cf  =  ^.  (8.3553-1) 
From  Equations  8.3553-1  and  8.333-14: 

Ci  =  +</*- 

C  =        cosfrfi  -  d2)  -  Vi  m(di  -  dz)l  (8.3553-2) 


Points  on  the  opposite  side  of  the  spheroid  may  be  found  by  taking  the  negative 
values  of  (j- 

The  duration  of  central  eclipse  may  be  estimated  by  disregarding  vertical  mo- 
tion and  considering  only  the  instantaneous  size  and  velocity  of  the  intersection  of 
the  shadow  with  the  plane  through  the  observing  point  and  parallel  to  the  funda- 
mental plane. 

From  the  section  on  conditional  and  variational  equations  (Equation  8.3421-5): 

pp  =  UJF  X  pp 

has  components 

4  =  p(—y  sin  d  +  C  cos  d), 

17  =  fix  sin  d  -  dQ.  (8.3553-3) 

Using  the  definitions 

n2  =  (x  -  if  +  (y  -  f,)2, 
L2  =  h  -  Ctan/2, 

the  duration  is 

2L2/n       (with  appropriate  sign).  (8.3553^4) 

The  units  must  be  converted  as  necessary.  Normally  the  conversion  is  from  hours 
to  seconds  of  time.  Before  1982,  L2  had  to  be  adjusted  for  different  values  of  k. 

In  local  circumstances,  however,  the  accurate  duration  is  the  difference  between 
Appropriate  pairs  of  contact  times. 


456  EXPLANATORY  SUPPLEMENT 

The  width  of  the  path,  perpendicular  to  the  direction  of  motion,  may  be  esti- 
mated by  a  formula  derived  by  Mikhailov  (1931): 


width  =  2L2  <  C2  + 


-i  5  ' 


1/2 

n  n 


(8.3553-5) 


8.3554  Northern  and  southern  limits  of  umbra  or  penumbra  Each  curve  limiting 
a  shadow  path  is  the  locus  of  points  on  the  surface  of  the  Earth's  spheroid  tangent 
to  the  path  of  the  shadow,  such  that  first  and  last  contacts  are  simultaneous,  or  else 
maximum  occurs  in  the  horizon.  The  umbra  nearly  always  has  both  limits  on  the 
surface  because  it  is  so  small,  but  the  penumbra  often  has  only  one.  The  northern 
and  southern  limits  of  the  umbral  track  define  the  central  path;  the  northern  and/or 
southern  limits  of  the  penumbral  track,  plus  the  curve  of  rise  and  set,  define  the 
limits  of  the  eclipse. 

Impose  the  condition  that  Equation  8.353-2  must  be  satisfied.  Choose  a  value 
of  £.  If  a  complete  set  of  limits  is  being  generated,  it  is  usual  to  begin  with  £  =  0. 
Then  the  coefficients  of  sin  Q  and  cos  Q  are  evaluated  and  the  left-hand  side  of 
Equation  8.353-2  is  used  as  a  discriminant.  This  discriminant  is  evaluated  for  a 
run  of  Q,  starting  from  a  first  guess  obtained  by  setting  a,  =  0,  and  proceeding  a 
degree  at  a  time  until  two  zero  points  are  found  (by  inverse  interpolation  when  the 
discriminant  changes  sign).  Then  for  each  Q,  iterate  on  C  as  follows,  using  Besselian 
elements: 


Li  =  {;  -  Ctan/,-, 
£  =x  —  Lj  sin  Q, 
??i  =(y  -  L,sin(2)/  pu 

C?  =  i2  -  £2  -  t}\    (If     <  0,  there  exists  no  point.) 
Normally  choose  Q  >  0  to  continue. 

Ci  <  0  may  be  used  to  continue  the  curve  below  the  horizon. 
C  =  PilCi  cos(rf,  -d2)-vi  sin(</,  -  d2)l  (8.3554-1 ) 

i  =  umbra  or  penumbra. 

Put  this  value  of  C  into  8.353-2,  and  repeat  until  it  converges  to  the  required 
tolerance.  In  The  Astronomical  Alw.an.ac,  that  is  10-5  earth  radii.  In  extremes  of 
these  curves,  the  iteration  may  begin  oscillating  about  some  mean  value,  in  which 
case  the  mean  is  taken  to  continue  the  iteration. 

When  the  iteration  converges,  then  the  point  is  assigned  to  a  limit,  by  the 
discriminant: 

Lj  cos  Q  <  0  for  northern  limit 

LjCosQ  >  0  for  southern  limit.  (8.3554-2) 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON 

The  coordinates  (£,  ni.Ci)  are  then  easily  converted  to  (4>,  A). 


457 


8.3555  Outline  curves  An  outline  curve  of  the  shadow  (umbra  or  penumbra)  on 
the  spheroid  is  the  locus  of  all  points  at  which  the  corresponding  central  or  partial 
eclipse  is  beginning  or  ending  at  a  given  time.  Outline  curves  are  usually  published 
only  in  the  form  of  special  maps.  Outline  curves  for  the  penumbra,  showing  the 
places  where  the  partial  phase  is  beginning  or  ending  at  stated  times,  are  plotted 
on  the  small-scale  maps  presented  in  The  Astronomical  Almanac  and  other  publica- 
tions. (See  also  Section  8.361.)  Outline  curves  of  the  umbra  are  not  published.  For 
all  practical  purposes,  it  is  acceptable  to  neglect  the  flattening  of  the  Earth  in  these 
calculations,  but  for  the  maps  in  The  Astronomical  Almanac,  it  is  not  neglected. 

The  angle  Q  becomes  the  independent  variable.  At  the  instant  for  which  the 
curve  is  calculated,  if  both  the  northern  and  southern  limits  of  the  penumbra  exist, 
then  Q  has  the  complete  range  of  0°  to  360°.  If  not,  the  extreme  values  must  be 
found;  they  are  two  points  on  the  curve  for  which  (  =  0.  Because  these  points  are 
on  the  limiting  curves,  in  the  computer  program  an  initial  test  is  made  for  the 
availability  of  points  already  computed  for  the  limiting  curves. 

Those  points  are  then  verified  from  the  equations 

£  -  x  -  Li  sin  <?, 
niPi  -y-  Li  cos  Q, 
e2+^  +  Cf  =  1,  (8.3555-1) 

in  which  £i  =  0.  Once  the  end  points  are  found  and  the  correct  portion  of  the 
arc  which  intersects  the  illuminated  surface  is  established,  points  are  calculated  at 
one-degree  steps  of  Q,  iterating  as  described  for  the  northern/southern  limit  curves 
and  requiring  (i  >  0.  If  desired  for  special  purposes,  points  below  the  horizon  may 
be  found  by  using  the  solutions  for  Ci  <  0. 


8.3556  Other  curves  For  1960-1980,  maps  in  the  American  Epkemeris  and  Nau- 
tical Almanac  showed  curves  of  equal  middle  and  equal  semiduration  of  eclipse. 
These  curves  were  constructed  graphically  from  the  intersections  of  a  network  of 
outline  curves,  as  there  is  no  way  to  calculate  them  directly. 

Curves  of  maximum  eclipse  are  not  prepared  for  regular  publications,  but  may 
be  readily  calculated.  Such  calculations  are  an  extension  of  the  procedure  for  the 
curve  of  maximum  eclipse  in  the  horizon,  in  which  the  condition  £  =  0  is  removed, 
and  £  becomes  the  independent  variable — i.e., 

Choose  C; 

Find  Q  (two  values)  from  Equation  8.353-2; 

Find  7  from  sin(-y  -Q)  =  (xcos  Q  -  y  sin  Q)  I  rp  (fundamental  cross-product). 


458 


EXPLANATORY  SUPPLEMENT 


s  X  n 


Figure  8.3556.1 

Definition  of  auxiliary  quantity  ip.  L  is  radius  of  the  shadow  in  the  plane  of  the  observer, 
A  is  distance  of  observer  from  the  axis,  n  is  speed  of  separation,  s  is  semi-duration. 


If  neither  value  of  Q  gave  an  imaginary  result,  only  one  may  be  an  eclipsed  point 
in  most  cases.  It  is  also  required  that 

\A\  <  \L\,    or    (jc  -  01  +  (y  ~  "H?  >  if.  (8.3556-1) 

If  this  test  is  met,  iteration  may  proceed  as  usual. 

From  maximum  eclipse,  semiduration  of  the  partial  phase  may  be  estimated  as 
follows.  Define  tp  in  Figure  8.3556.1,  where  s  is  the  semiduration  and  n  is  the  speed 
of  shadow.  The  respective  units  are  hours  and  equatorial  radii  per  hour.  Then 

s  =  (Lj  cos  ip)  I  n, 

where 

smip  =  A  I  Lj, 

n2  =  (x-02  +  (y-r))\ 
I  =  fi  cos  ip  cos  6, 

V  =  Ksind.  (8.3556-2) 

The  exact  duration  is  found  from  the  difference  in  times  of  first  and  last  contacts, 
as  described  in  Section  8.3621. 

The  magnitude  of  the  eclipse  is  found  from 

k—A.  (8.3556-3) 
L,  +L2 


If  Lq.  is  not  available,  the  approximation  La  =  £-i  —  0.5459  is  used.  (Subscript  1  for 
penumbra,  2  for  umbra.) 


g  /  ECLIPSES  OF  THE  SUN  AND  MOON  459 

Curves  of  equal  semiduration  or  equal  magnitude  must  be  found  by  inverse  in- 
terpolation on  curves  of  maximum  eclipse.  (See  Section  8.36  on  local  circumstances 
for  further  discussion  of  magnitude.) 

8.356  General  Circumstances  A  collection  of  event  points  known  as  the  general 
circumstances  are  the  important  extrema  of  the  curves  of  the  eclipse.  They  define 
the  bounds  of  the  eclipse  on  the  spheroidal  surface  and  in  time.  They  also  join 
together  the  various  curves  and  are  essential  in  preparing  the  eclipse  map.  General 
circumstances  are  computed  from  the  Besselian  elements  through  a  set  of  discrimi- 
nants. For  each  discriminant,  a  table  of  values  is  calculated  for  a  sequence  of  times, 
and  used  as  described  in  Sections  8.3561-8.3565.  In  practice,  general  circumstances 
are  calculated  before  the  complete  curves  are  generated.  If  circumstances  are  re- 
quired for  high  altitudes,  the  calculations  are  repeated  for  a  larger  spheroid. 

The  first  and  last  contacts  of  the  penumbra  occur  for  every  solar  eclipse.  They 
are  the  points  where  the  shadow  cone  of  the  Moon  first  and  last  encounters  the 
spheroidal  surface.  These  points  are  shown  on  the  eclipse  maps  as  First  Contact 
and  Last  Contact,  and  always  lie  on  the  rising  and  setting  curve.  The  times  at  which 
they  occur  define  the  date(s)  of  the  eclipse. 

If  the  eclipse  is  central,  then  there  are  first  and  last  contacts  of  the  umbra.  These 
are  the  extreme  end  points  of  the  central  line,  and  fall  on  the  curve  of  maximum 
eclipse  in  the  horizon. 

For  a  central  eclipse,  there  are  also  extreme  points  of  the  northern  and  southern 
limits  of  the  central  track.  It  is  a  rare  occurrence  when  only  one  limit  exists.  These 
points  also  fall  on  the  curve  of  maximum  eclipse  in  the  horizon. 

The  extreme  points  of  the  northern  and  southern  limits  of  the  penumbra  fall  on 
both  the  rising  and  setting  curve  and  the  curve  of  maximum  eclipse  in  the  horizon 
and,  thus,  mark  the  joining  points.  The  extremes  need  not  be  known  accurately; 
they  are  the  points  at  which  an  observer  theoretically  could  "see"  the  limb  of  the 
Moon  brush  the  limb  of  the  Sun  for  an  instant.  If  the  eclipse  curves  have  been 
calculated  taking  flattening  of  the  spheroid  into  account,  the  same  must  be  done 
for  these  points  or  the  curves  will  not  fink. 

The  point  of  central  eclipse  at  local  apparent  noon  or  midnight  is  self-explanatory, 
i.e.,  maximum  occurs  on  the  meridian.  Meridian  passage  at  midnight  may  occur  m 
the  polar  regions. 

The  point  of  greatest  eclipse  is  calculated  only  for  partial  eclipses  and  shown 
on  the  eclipse  map.  It  is  the  point  on  the  spheroidal  surface  that  comes  closest  to 
the  axis  of  the  shadow,  and  it  lies  on  the  curve  of  maximum  eclipse  in  the  horizon. 

8.3561  First  and  last  contacts  of  the  penumbra  First  and  last  contacts  of  the  penum- 
bra occur  when  the  shadow  cone  is  tangential  to  the  spheroid.  Thus  at  two  instants, 


x2+y2  =  (/,  +P)2. 


(S.3561-1) 


EXPLANATORY  SUPPLEMENT 


460 

Taking  the  flattening  of  the  Earth  into  account,  let 

2       2  7 

m  =3T  +y% 
m\  =  JT+yr, 
yt  =  yi  p, 

P  =  ™l>n\-  (8.3561-2) 
Then  x2  +  yj  =  (/,  +  m  /  /n,  f  is  the  condition;  the  discriminant  is 

Di  s.r2  +  vf  -  (/[  +mlm\)1.  (8.3561-3) 

In  the  table  of  discriminants,  the  times  of  the  contacts  are  calculated  by  inverse 
interpolation  when  D,  =  0.  These  times  are  used  to  obtain*,  y,  and  Pl.  At  the  times 
of  contact, 

m  =y\  i m  =  v/ p\m\, 

0=°  (8.3561-4) 
gives  the  data  to  compute  latitude  and  longitude  by  successive  approximation. 

8.3562    Beginning  and  end  of  central  eclipse    Central  eclipse  begins  and  ends  when 
the  shadow  axis  is  tangential  to  the  Earth's  surface— i.e., 

0=0.  (8.3562-1) 

The  discriminant  is 

D2=x1+y]-\,  (8.3562-2) 
and  the  procedure  is  the  same  as  for  the  penumbra. 

8.3563  Extreme  points  of  umbral  and  penumbral  limits  The  extreme  points  of  the 
limits  of  umbra  and  penumbra  are  found  by  setting  Ci  =  0  and  then  calculating  tan  Q 
from  Equation  8.3422-4. 


cos0  =  ±(l  +tan20-|/2, 
sin  £  =  cos  Q  tan  Q, 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  4g-| 

%  =  x  -  li  sin  Q,  (=1,2, 
rj)  =  (yT//cos0/pi,       (=  1,  2, 

f2  +  'fr  =  l.  (8.3563-1) 

Note  that  the  sign  of  cos  Q  determines  whether  the  point  is  on  the  northern  or 
southern  limit.  Note  also  that  there  are  two  cones  and,  therefore,  four  discriminants 
of  the  form 

m*(x-lsmQ?+  (y~^°SQ)  -1,       i  =  3,... ,6.  (8.3563-2) 

Again,  the  times  are  found  by  inverse  interpolation,  and  the  coordinates,  with 
flattening  taken  into  account,  by  the  usual  procedure. 

8.3564  Central  eclipse  on  the  meridian  Central  eclipse  on  the  meridian — noon  or 
midnight  —is  the  point  on  the  central  line  at  conjunction  of  the  Sun  and  the  Moon 
in  right  ascension.  The  discriminant  is  x,  and  the  condition  is  x  =  0.  Test  the  signs 
carefully  in  polar  regions,  to  distinguish  noon  from  midnight. 

8.3565  Greatest  eclipse  In  partial  eclipses,  the  maximum  magnitude,  or  greatest 
eclipse,  occurs  at  the  point  on  the  surface  of  the  spheroid  that  conies  closest  to  the 
axis  of  the  shadow.  The  magnitude  changes  very  slowly,  so  high  precision  is  not 
required.  The  eclipse  will  occur  in  the  horizon  at  this  point,  and  it  is  sufficient  to 
find  the  time  when  the  shadow  axis  is  closest  to  the  center  of  the  Earth  or  when 
the  rate  of  change  of  separation  goes  to  zero.  Hence,  the  discriminant  is 

D-,sxx  +  yy.  (8.3565-1) 

When  the  time  is  known,  position  is  found  as  before.  The  distance  of  the  observer 
from  the  axis  is 

A  =  m  -  p.  (8.3565-2) 
he  magnitude  of  the  greatest  eclipse  for  this  case  is 

(8.3565-3) 

l]  +  12 

8.36    Local  Circumstances 

Before  proceeding,  the  reader  should  review  Section  8.34  on  conditional  and  vari- 
ational equations.  Local  circumstances  provide  a  description  of  eclipse  phenomena 
relative  to  a  fixed  reference  position,  which  is  equivalent  to  fixing  p  as  constant. 


462 


EXPLANATORY  SUPPLEMENT 


8.361  Eclipse  Maps  The  eclipse  maps  currently  given  in  The  Astronomical  Al- 
manac show  the  region  over  which  various  phases  of  each  solar  eclipse  may  be  seen 
and  the  times  at  which  phases  occur.  Each  map  is  a  plot  of  the  curves  described 
in  Section  8.355,  except  that  outline  curves  are  limited  to  those  of  the  penumbra 
every  half  hour. 

The  outline  curves  are  divided  into  leading  edge  (in  short  dash)  and  trailing 
edge  (in  long  dash).  Except  for  certain  extreme  cases,  the  shadow  outline  moves 
generally  from  west  to  east.  For  a  given  location,  first  contact  (the  beginning  of 
partial  eclipse)  occurs  when  the  leading  edge  of  the  shadow  arrives;  similarly,  last 
contact  (the  end  of  partial  eclipse)  occurs  when  the  trailing  edge  arrives.  First  or 
last  contact  may  be  estimated  from  the  map  to  within  a  few  minutes. 

8.362  Precise  Calculations  There  are  many  refinements  to  be  considered  in  per- 
forming precise  calculations:  choosing  a  consistent  ephemeris,  corrections  for  Earth's 
rate  of  rotation,  and,  for  the  Moon,  offset  of  center  of  figure  from  center  of  mass; 
correcting  for  irregularities  of  the  lunar  limb;  and  effects  of  the  Earth's  atmosphere 
(refraction  in  solar  eclipses  and  the  effect  on  the  shadow  in  lunar  eclipses). 

Some  elements  (e.g.,  the  radius  of  the  shadow  cone)  used  to  describe  an  eclipse 
remain  nearly  constant  for  the  duration.  Elements  that  change  do  so  very  nearly 
linearly.  In  effect,  an  observer  sees  an  eclipse  as  two  disks  of  fixed  size,  one  crossing 
the  other  in  a  straight  line  at  constant  speed. 

In  conventional  notation,  define  u,  v  such  that: 


r-  p  = 

y-rj 

V 

0 

0 

The  distance  from  the  observer  to  the  nearest  point  of  the  shadow  axis  is  |m|  =  m. 
Let  the  relative  velocity  be  n  =  m,  and  then  the  relative  speed  is  |n|  =  n.  The  rate 
of  separation  is  m  •  n,  and  maximum  eclipse  occurs  when  the  shadow  axis  is  closest 
to  the  observer,  or  m  ■  n  =  0. 

8.3621  Contact  times  and  duration  At  the  beginning  or  end  of  penumbral,  or  par- 
tial, phase,  the  condition  b«a£j.  Similarly,  if  the  chosen  point  is  in  the  central 
path,  then  at  the  beginning  or  end  of  umbral  phase  m  =  La- 
There  are  methods  for  finding  the  times  of  these  phenomena  by  successive  iter- 
ation, using  approximations  and  auxiliary  angles.  However,  it  is  simpler  to  tabulate 
h,  v,  L  (where  L  is  either  radius)  as  a  function  of  time,  and  also  the  discriminant 
u  +v2  —L2 .  When  the  discriminant  goes  to  zero,  inverse  interpolation  gives  the  time 
of  the  local  contact.  Duration  is  the  difference  between  the  two  contact  times  for 
the  umbra. 


g  /  ECLIPSES  OF  THE  SUN  AND  MOON  463 

8.3622  Position  angles  The  projected  shadow  is  a  reflection  of  what  the  observer 
sees  in  the  sky,  so  the  position  angle  of  contact,  Q,  may  be  found  from 


m  = 


L&inQ 
L  cos  Q 
0 


(8.3622-1) 


The  angle  Q  is  measured  eastward  from  the  north,  on  the  solar  limb  as  the  observer 
sees  it,  or  the  projected  shadow  circle  on  the  imaginary  plane  of  reference.  From 
the  observer's  point  of  view,  however,  the  vertex  (up)  is  not  usually  north.  The 
parallactic  angle  C,  defined  by  tanC  s  is  the  measure  of  the  difference.  The 
position  angle  V  of  the  contact  point  from  the  vertex  is 


V  =  Q  -  C. 


(8.3622-2) 


8.3623  Magnitude  and  obscuration  Magnitude  is  commonly  confused  with  obscu- 
ration. Magnitude  is  defined  as  the  fraction  of  the  solar  diameter  covered  by  the 
Moon  at  the  time  of  greatest  phase  and  is  expressed  in  units  of  the  solar  diameter. 
Obscuration  is  the  fraction  of  the  surface  of  the  solar  disk  obscured  by  the  Moon. 

In  the  case  of  total  eclipse,  the  magnitude  can  be  greater  than  1.0.  To  derive 
the  expression,  however,  the  annular  case  is  shown  in  Figure  8.3623.1.  An  observer 
at  point  B  in  the  penumbra  sees  part  S'B'  of  the  solar  diameter  blocked  off,  whereas 
an  observer  at  point  E  in  the  umbra  sees  the  Moon's  entire  disk  projected  in  DD' 
on  the  Sun,  SS'. 

The  known  quantities  are 


P'O  =  PO  =  Lu 
A'0  =  AO  =  L2, 
BO  =  m. 


(8.3623-1) 


At  B,  magnitude  M\  -  S'B'  I  SS' 

=  PB I  PA'  by  simple  proportion 
=  (PO-BO)/(PO+OA') 
p  (L]  -m)/(L,  +L2). 


(8.3623-2) 


At  E,  magnitude  M2  =  DD'  I  S'S 

=  (S'D  -  S'D')  I  S'S 
=  PE/PA'  -AEIPA' 
=  PA  I  PA' 

=  (JU  -L2)/(L,  +La). 


(8.3623-3) 


Figure  8.3623.1 

Magnitude  is  the  fraction  of  the  linear  diameter  of  the  Sun  covered  by  the  Moon.  In  this  schematic 
of  an  annular  eclipse,  in  the  observer's  plane,  A' A  is  the  zone  of  annularity.  To  an  observer  within 

■  n'n1Cc*at  P°lnt  £' the  M°°n'S  cross"section  MM'  Projects  onto  SS'  as  DD'.  Hence  the  magnitude 
is  U  U I S  S.  To  an  observer  at  point  B  in  the  zone  of  partial  eclipse,  S'B'  is  obscured,  hence  the 
magnitude  is  S  B  I  SS. 


Figure  8.3623.2  ,        , ,    ,    . . 

Obscuration  is  the  fraction  of  the  area  of  the  solar  disk  obscured  by  the  Moon. 
Here  it  is  the  ratio  of  the  area  of  segment  CDC'F  to  the  area  of  the  solar  disk. 


For  a  total  eclipse,  in  which  the  plane  is  on  the  other  side  of  the  vertex,  A  and  A 
are  reversed,  so  that  OA  =  -L2,  and  the  expression  is  identical.  Note  also  that  this 
is  the  diameter  of  the  lunar  disk  in  units  of  the  diameter  of  the  solar  disk. 

The  degree  of  obscuration  is  now  calculated  using  Lu  U,  and  m-  In 
ure  8  3623  2  A  is  the  center  of  the  lunar  disk,  B  is  the  center  of  the  solar  disk. 
The  disks  overlap,  with  intersections  at  C,  C .  The  line  AB  joins  the  centers  and  in- 
tersects the  circumferences  and  the  chord  CC  at  the  indicated  points.  Let  the^ lunai 
radius  be  s  =  AC.  The  solar  radius  is  taken  as  unity;  hence  BC  =  1  and  AC  -  M2  -  S, 
By  definition  also,  and  in  units  of  solar  radius,  M,  =DF/2,  or  DF  =  2M\  ■  Finally, 


AB  ==  1  +  s  —  DF. 


(8.3623-4) 


In  terms  of  known  quantities,  then 


BC=  1, 

AC  =  M2  = 

DF  =  2 


L2 


=  5, 


AB=  1  + 


Li  +  Li 
L\  -  m 
Li  +  L2 

U-L2     2(L]  -  m) 


L\  +L2       L\  +  L2 


2m 
U+L2 


(8.3623-5) 


466  EXPLANATORY  SUPPLEMENT 

The  area  of  the  solar  disk  covered  by  the  Moon  is  given  by 


S  =  segment  CFC'  +  segment  CDC',  (8.3623-g) 

segment  CFC'  =  2(sector  ACF  -  triangle  ACE), 

segment  CDC'  -  2(sector  BCD  -  triangle  BCE).  (8.3623-7) 

Using  angles  in  radians: 

Area  of  sector  ACF  =  sA, 
Area  of  sector  BCD  =  B, 

CE  =  3  sin  A  =  sin  B, 

AE  -  scosA, 

EB  =  cos  B.  (8.3623-8) 
Substituting  into  Equations  8.3623-7  and  then  8.3623-6: 

segment  CFC'  =  2  f  i*2^  -  ^s2  sin  A  cos  A ), 

segment  CDC'  -  2  (  -B  —  -  sin  B  cos  B 
\2  2 

S  =  (a2 A  +  B)  —  (s2  sin  A  cos  A  +  sin  B  cos  B) 
=  (s2A  +B)-s  sin  C.  (8.3623-9) 

The  area  of  the  solar  disk  is  7r:  hence  the  obscuration  as  a  fraction  of  the  disk  is 

S'  =  S/lT. 

The  angles  A,  B,  and  C  may  be  evaluated  from  fundamental  rules  of  trigonom- 
etry. The  working  relations  are: 

cos  C={L\+l^-  2m2)  I  (jLj  -  L\),       0  <  C  <  n, 

cosfi  =  (LiL2  +m2)lm(L\  +  L2),  0  <  B  <  tt,  (8.3623-10) 

A  =  n  —  (B  +  C). 

If  an  observer  wishes  to  construct  a  diagram  showing  the  exact  relationships  of  the 
disks  during  the  course  of  an  eclipse,  it  is  useful  to  have  calculated  these  quantities 
at  a  convenient  tabular  interval.  Note  that  during  central  phase,  all  intersections 
cease  to  exist  and  the  quantities  are  undefined.  During  that  phase,  for  an  annular 
eclipse  S'  =  s2;  for  a  total  eclipse,  S'  =  1. 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  467 

g  363  Differential  Corrections  in  Space  and  Time  Differential  corrections  were  in 
times  past  used  to  adjust  precisely  calculated  local  circumstances  to  nearby  loca- 
tions. However,  computing  equipment  has  reached  such  a  stage  of  advancement 
that  differentials  have  fallen  into  disuse  in  favor  of  repeating  the  whole  calculation 
for  the  new  site. 

Calculations  are  normally  provided  in  provisional  Universal  Time  (UT)  or,  more 
precisely,  UTl  (see  Chapter  2)  using  a  predicted  value  of  AT.  For  record  purposes 
this  is  not  necessarily  the  best  practice,  but  for  the  convenience  of  users  it  was 
deemed  significant  enough  to  be  necessary.  If  a  later  value  of  A  T  is  adopted — such 
that  the  offset  becomes  AT  +  6T — then  tabular  quantities  may  be  corrected  quite 
easily  by  applying 

6X  =  - 1 . 002738 hT    (longitude  measured  eastward)  (8.363-1) 

to  all  longitudes  in  the  tabulated  phenomena,  and  subtracting  bT  algebraically 
from  all  tabulated  times  expressed  in  UT.  Finally,  interpolate  the  table  back  to  the 
original  arguments. 

For  calculation  of  circumstances  at  elevations  above  the  spheroid,  the  assumed 
radius  of  the  Earth  is  increased  accordingly  and  the  calculations  repeated. 


8.4   LUNAR  ECLIPSES 


8.41  Introduction 

The  calculation  of  lunar  eclipses  follows  the  same  principles  as  that  of  solar  eclipses. 
The  fundamental  plane  is  perpendicular  to  the  axis  of  the  shadow,  and  the  origin 
of  coordinates  is  the  shadow's  axis.  The  z-coordinate  is  not  used.  Since  the  observer 
is  on  the  body  that  is  casting  the  shadow,  the  circumstances  are  the  same  for  all 
parts  of  the  Earth  from  which  the  Moon  is  visible. 

The  criteria  for  the  occurrence  of  a  lunar  eclipse,  and  the  definitions  of  the 
types  that  may  occur,  are  given  in  Section  8.23. 


8.42  Computations 

Equations  8.2321-1  and  8.233-1  define  specific  values  of  the  separation  of  centers 
at  which  contacts  occur  (see  Figure  8.2321.1).  By  conventional  notation  deriving 
from  solar  eclipses,  the  angular  distance  between  the  centers  of  the  Moon  and  the 
shadow  is  designated  L  and  at  times  of  contact  has  values  as  follows: 


at  beginning  and  end  of  the  penumbral  eclipse,  L]  =  f\  +  sm\ 
at  beginning  and  end  of  the  umbral  eclipse,  L2  =  fi  +  sm'< 
at  beginning  and  end  of  the  total  eclipse,  £3  =  fi  -  sm. 


(8.42-1) 


468  EXPLANATORY  SUPPLEMENT 

As  is  the  case  for  solar  eclipses,  for  dates  when  a  lunar  eclipse  is  to  be  calculated 
apparent  ephemerides  of  the  Sun  and  the  Moon  are  generated  at  a  suitable  interval, 
by  subtabulation  if  necessary.  The  usual  interval  is  10  minutes.  The  ephemeris  is 
corrected  for  the  offset  of  the  center  of  figure  from  the  center  of  mass,  as  appropriate 
for  the  chosen  ephemeris,  and  the  argument  is  changed  to  UT  by  applying  AT. 

8.421  Besselian  Elements  As  in  Section  8.322  and  Equation  8.322-1,  the  geocen- 
tric unit  vector  to  the  Sun,  in  an  equatorial  system,  is 


COS  Q5  COS  6S 

sin  qs  cos  <5S 
sin  6, 


(8.421-1) 


It  follows  that  the  vector  of  the  antisolar  point,  along  the  axis,  is  rac  =  — rso.  This 
vector  corresponds  to  g  in  Equation  8.322-2,  with  a  =  a%  +  12",  d  =  —Ss,  for  a 
geocentric  system  and  eliminates  the  step  of  solving  for  (a,d).  To  transform  the 
Moon's  position  to  a  geocentric  system  in  which  the  z-axis  is  parallel  to  the  axis 
of  the  shadow,  apply  the  same  rotations  as  given  in  Equation  8.322-3,  but  for 
units  use  seconds  of  arc.  This  calculation  gives  Equations  8.322-6,  without  the  unit 
conversion  factor,  and  from  which  only  (x,y)  in  the  fundamental  plane  are  used. 
To  summarize: 


cos  a  cost/" 

—  cos  as  cos  6S 

raG  = 

sin  a  cos  d 

=  -rsG  - 

sin  as  cos  6S 

(8.421-2) 

sind 

—  sin  Ss 

«mF  =  Rj  [~  -  </)  R3  (a  +  |)  rmG  = 


cos  6m  sin(am  —  a) 
sin  Sm  cosd  —  cosi5m  sindcos(am  —  a) 
sin  6m  sin  d  +  cos  6m  cos  d  cos(om  -  a) 

«.[*   y   zf,  (8.421-3) 


where 


dm --St, 
a  =  as  +  n. 


In  the  fundamental  plane — i.e.,  where  z  =  0 — the  separation 


m  =  {x2+y2)1, 


(8.421-4) 


Call  the  vector  form  m.  The  hourly  variation,  m,  is  found  by  numerical  differenti- 
ation or,  if  a  polynomial  representation  is  used,  by  differentiating  the  polynomial. 


g  /  ECLIPSES  OF  THE  SUN  AND  MOON  469 

The  Besselian  elements  for  a  lunar  eclipse  are x,  y,  x,  y,  m,  L\,  Li,  Z-3,  f\ ,  f2.  There 
is  no  widely  accepted  convention,  however,  and  the  elements  are  not  published  in 
The  Astronomical  Almanac. 

g.422    Contact  Times    The  contact  times  can  now  be  found  by  either  of  two  meth- 
ods. 

One  method  is  to  choose  a  time  T0  near  opposition,  with  corresponding  m0,  rh0. 
For  a  contact  at  time  T  =  Tq  +  r,  in  which  /  is  positive  or  negative  and  L  is  chosen 
from  Equation  8.42-1, 

(mo  +  mo  t)  ■  (m0  +  iho  t)  =  L  •  L.  (8.422-1) 

Equation  8.422-1  may  be  solved  as  a  quadratic  equation  in  t\  use  the  two  roots 
to  estimate  the  two  contacts.  The  two  times  may  then  be  used  to  start  a  second 
iteration,  and  convergence  is  very  rapid. 

Alternatively,  the  following  discriminants  may  be  tabulated  as  a  function  of 
time: 

Li  —  m, 
Li  —  m, 

Li  -  m,  (8.422-2) 

for  a  timespan  starting  before  opposition  such  that  initially  m  =  1.5Li,  and  contin- 
uing until  the  first  discriminant  has  passed  through  zero  twice. 

No  approximations  or  manipulations  are  necessary.  At  each  time  step,  the  dis- 
criminants are  examined  for  a  change  of  sign  from  the  preceding  step;  when  a  change 
occurs,  find  the  time  of  the  zero  by  inverse  interpolation.  The  cases  that  may  occur 
appear  in  Table  8.422.1,  and  must  occur  in  the  sequence  indicated. 

In  special  cases  where  examination  indicates  that  one  phase  might  have  begun 
and  ended  within  a  single  tabular  interval,  subtabulation  or  the  alternative  method 
of  polynomial  iteration  may  be  necessary. 

8.423  Time  of  G  reatest  Obscuration  The  time  of  greatest  obscuration  occurs  when 
the  axis  of  the  shadow  is  closest  to  the  center  of  the  Moon,  or  when  m  is  a  minimum: 

—  (m  •  m)  =  0  or  m  ■  in  =  0,  (8.423-1) 
dt 

The  quantity 

m  ■  rh  =  xi:  +  yy  (8.423-2) 


may  also  be  tabulated  as  a  discriminant  and  the  zero  found  by  inverse  interpolati 


470 


EXPLANATORY  SUPPLEMENT 


Table  8.422.1 

Sequences  and  Conditions  for  Contact  Times 


Start 

Condition 

End 

No  eclipse 

L\  -  m  <  0 

No  eclipse 

Penumbral  eclipse  begins 

lq  —  m  =s  o 

Penumbral  eclipse  ends 

Penumbral  eclipse 

i.,  -  m  >  o  and  Lz  -  m  <  0 

Penumbral  eclipse 

Partial  eclipse  begins 

L2  -  m  =  0  and  L3  -  m  <  0 

Partial  eclipse  ends 

Partial  eclipse 

/_3  -  m  <  0 

Partial  eclipse 

Total  eclipse  begins 

£3  -  m  =  0 

Total  eclipse  ends 

Total  eclipse 

L3  -  m  >  0 

Total  eclipse 

Note:  The  events  in  the  leftmost  column  of  the  table  occur  in  sequence  from  the  top  down,  and  in  the 
rightmost  column  of  the  table,  from  the  bottom  up. 


8.424  Magnitude  The  magnitude  is  the  fraction  of  the  Moon's  diameter  covered 
by  shadow,  in  units  of  the  lunar  diameter.  As  published,  magnitude  corresponds 
only  to  the  maximum  obscuration,  but  for  use  in  special  calculations,  it  may  be 
calculated  as  a  function  of  time  for  both  umbra  and  penumbra. 

The  expression  is 

Lj  —  m 

—n  ,        (=  1,2,  (8.424-1) 

in  which  L\  is  used  for  penumbral  magnitude  and  for  umbral  magnitude.  Mag- 
nitude may  be  greater  than  unity,  but  not  negative. 

8.425  Position  Angles  The  position  angle  of  contact  P  on  the  limb  of  the  Moon  is 
the  position  angle  M  of  m  at  the  instant  of  contact,  measured  eastward  (clockwise) 
from  the  north;  i.e., 

tanM  =  xl  y 

P  =  M  for  interior  contacts 

=  Af  +  1  80°       for  exterior  contacts.  (8.425-1) 

8.426  Sublunar  Points  The  latitudes  (<p)  and  longitudes  (A)  of  places  that  have 
the  Moon  in  the  zenith  at  given  times  are  given  by 

<P  =  6m 

A  =  Greenwich  apparent  sidereal  time  —  am.  (8.426-1) 


8  /  ECLIPSES  OF  THE  SUN  AND  MOON  4J\ 

For  a  given  position  (^>o,  An)  found  from  this,  the  horizon  circle  is  the  locus  of  points 
on  a  great  circle  that  satisfy  the  condition: 

tan  <j>  =  -  cot  4>0  cos(A0  -  A).  (8.426-2) 

Values  of  A  may  be  assumed  and  coordinate  pairs  calculated.  The  hemisphere  de- 
fined by  this  central  point  and  horizon  circle  is  where  the  Moon  is  above  the  horizon 
at  the  instant. 


8.5  TRANSITS 

As  mentioned  in  Section  8.1,  a  transit  occurs  when  the  shadow  of  one  of  the  infe- 
rior planets  falls  upon  the  Earth.  Information  concerning  transits  of  Mercury  and 
Venus  is  tabulated  in  The  Astronomical  Almanac.  This  information  consists  of  the 
elements  of  the  transit  (positions  and  motions  of  the  Sun  and  inferior  planet  at 
time  of  conjunction),  geocentric  phases,  and  short  formulas  that  are  functions  of  an 
observer's  longitude  and  latitude  to  generate  local  circumstances.  Additionally,  a 
world  map  (Mercator  projection)  is  provided  from  which  a  user  can  determine  the 
region  of  visibility  and  approximate  local  circumstances. 

Prior  to  and  including  the  1986  transit  of  Mercury,  an  extension  of  Newcomb's 
(1882)  heliocentric  method  was  employed  in  the  transit  calculations  for  The  As- 
tronomical Almanac.  The  required  heliocentric  ephemeris  of  Mercury  was  based 
on  Newcomb's  Tables  of  Mercury,  and  the  heliocentric  ephemeris  of  the  Earth  was 
derived  from  Newcomb's  Tables  of  the  Sun.  The  corrections  made  to  these  ephemer- 
ides  and  the  actual  method  used  to  compute  the  transits  is  described  in  the  original 
Explanatory  Supplement. 

In  theory,  the  general  methods  used  to  compute  solar  eclipse  phenomena  may 
be  extended  to  predict  the  circumstances  of  a  transit  once  the  inferior  planet  has 
been  substituted  for  the  Moon.  Chauvenet  (1891)  derived  a  special  method,  based 
on  improvements  to  Lagrange's  method,  which  takes  advantage  of  the  small  paral- 
laxes of  the  Sun  and  the  transiting  planet.  This  method  requires  apparent  geocentric 
ephemerides  of  the  Sun  and  planet  as  input.  The  apparent  ephemerides  can  be  read- 
ily computed  from  a  modern  solar  system  ephemeris,  such  as  DE200,  using  methods 
described  in  Chapter  5.  Chauvenet's  method  also  allows  for  the  generation  of  short 
formulas,  functions  of  longitude  and  latitude,  from  which  local  circumstances  may 
be  computed.  The  interested  reader  may  use  the  references  given  in  Section  8.6  for 
further  details. 


472 

8.6  REFERENCES 


EXPLANATORY  SUPPLEMENT 


Further  information  on  calculations  and  predictions  is  often  difficult  to  obtain.  The  fol- 
lowing is  a  guide  to  the  most  important  material. 

Chauvenet,  W.  (1891).  A  Manual  of  Spherical  and  Practical  Astronomy  fifth  ed.  (J.B. 
Lippincott  Co.,  Philadelphia)  reprinted  1960  (Dover  Publications,  New  York)  I,  pp, 
436-542  (solar  eclipses);  pp.  542-549  (lunar  eclipses);  pp.  591-601  (transits  of  inner 
planets).  This  reference  contains  an  account  of  the  formulas  necessary  for  the  pre- 
diction of  the  stated  phenomena  for  the  Earth  generally,  and  for  a  particular  place. 
Various  corrections  derived  from  observations  are  also  considered.  The  formulas  and 
constants  are  suitable  for  use  with  logarithms.  An  adaptation  for  modern  use,  upon 
which  much  of  the  development  in  this  chapter  is  based,  is  in  the  technical  report  by 
Williams. 

Her  Majesty's  Nautical  Almanac  Office  (1961).  Explanatory  Supplement  to  the  Astronom- 
ical Ephemeris  and  the  American  Ephemeris  and  Nautical  Almanac  (H.M.  Stationery 
Office,  London).  Chapter  9  on  eclipses  and  transits  is  the  predecessor  of  the  present 
exposition. 

Green,  R.  (1985).  Spherical  Astronomy  (Cambridge  University  Press,  Cambridge).  This 
book  and  the  book  by  Murray  are  extremely  helpful  in  presenting  spherical  trigonom- 
etry in  vector  notation. 

Herald,  D.  (1983).  "Correcting  Predictions  of  Solar  Eclipse  Contact  Times  for  the  Ef- 
fects of  Lunar  Limb  Irregularities"  J.  Brit.  Astron.  Assoc.  93,  241-246.  This  paper 
gives  precepts  for  constructing  charts  to  correct  solar  eclipse  contact  times  for  the 
effects  of  lunar  limb  irregularities.  A  useful  discussion  estimates  the  total  effect  and 
its  components. 

Link,  F.  (1969).  Eclipse  Phenomena  in  Astronomy  (Springer- Verlag,  New  York).  This 
book  contains  a  wealth  of  information  on  lunar  eclipses  and  transits;  the  informa- 
tion is  available  almost  nowhere  else.  The  volume  presents  primarily  physical  and 
atmospheric  effects  of  the  eclipsing  body,  but  also  includes  computational  and  histor- 
ical information.  It  also  treats  eclipse  and  occupation  effects  involving  other  planets, 
natural  and  artificial  satellites,  radio  wavelengths,  and  relativistic  effects. 

Liu  Bao-Lin  (1983).  "Canon  of  Lunar  Eclipses  from  1000  B.C.  to  A.D.  3000"  Pub.  Purple 
Mountain  Obs.  2,  1.  This  volume  contains  data  on  9800  lunar  eclipses,  including 
penumbral.  It  contains  the  data  in  a  different  form  from  that  of  Meeus  and  Mucke, 
and  uses  conventional  augmentation  of  the  Earth's  shadow.  The  primary  use  of  canons 
is  for  chronological  and  historical  research,  but  they  are  also  useful  for  planning  and 
for  seeking  long-term  cyclic  features. 

Meeus,  J.,  Grosjean,  C,  and  Vanderleen,  W.  (1966).  Canon  of  Solar  Eclipses  (Perganion 
Press,  Oxford).  In  the  style  of  Oppolzer,  but  with  improved  calculations,  this  canon 
covers  only  solar  eclipses  from  1898  to  2510.  An  introduction  contains  the  theory, 
general  description,  and  a  discussion  of  eclipse  cycles.  Maps  show  the  central  tracks 
over  the  entire  Earth. 

Meeus,  J.  and  Mucke,  H.  (1983).  Canon  of  Lunar  Eclipses,  -2002  to  2526  second  ed.  (As- 
tronomical Office,  Vienna).  This  book  contains  data  on  10936  lunar  eclipses,  including 
penumbral.  The  data  are  in  the  form  of  computer  listings  and  plotted  reference  charts. 
The  data  are  in  a  different  form  from  those  of  Liu,  using  Danjon's  augmentation  of 
the  Earth's  radius.  Correction  for  AT  is  not  applied. 


/  ECLIPSES  OF  THE  SUN  AND  MOON 


473 


Mikhailov,  A.  (1931).  "Uber  die  Berechnung  der  Breite  der  Totalitatszone  bei  Sonnenfin- 
sternissen"  Astronomisches  Nachrichten  243,  51. 

Mitchell,  S.A.  (1951).  Eclipses  of  the  Sun,  fifth  ed.  (Columbia  University  Press,  New  York). 
This  book  describes  observing  expeditions  in  the  first  half  of  the  twentieth  century. 

Mucke,  H.  and  Meeus,  J.  (1983).  Canon  of  Solar  Eclipses  -2003  to  +2526  (Astronomical 
Office,  Vienna).  This  book  contains  elements  of  10774  solar  eclipses,  in  the  form  of 
computer  listings  and  small  plotted  charts.  The  information  is  based  on  Newcomb's 
solar  theory  and  the  ILE,  and  is  arranged  for  use  by  Bessel's  method.  Correction  for 
AT  is  not  applied. 

Murray,  C.A.  (1983).  Vectorial  Astrometry  (Adam  Hilger  Ltd.,  Bristol,  England). 

Newcomb,  S.  (1882).  "Discussion  and  results  of  observations  on  transits  of  Mercury,  from 
1677  to  1881"  APAEl,  part  VI  (U.S.  Naval  Observatory,  Washington). 

Oppolzer,  T.R.v.  (1887).  Canon  der  Finsternisse  (Imperial  Academy  of  Science,  Vienna) 
reprinted  1962  (Dover  Publications,  New  York)  with  English  translation.  This  book 
contains  elements  of  8000  solar  eclipses  from  -1207  November  10  (Julian  proleptic 
date)  to  2161  November  17  (Gregorian  date)  and  of  5200  lunar  eclipses  from  -1206 
April  21  to  2163  October  12.  Maps  show  the  central  paths  of  total  and  annular  eclipses 
in  the  northern  hemisphere.  Data  are  arranged  for  calculation  by  Hansen's  method, 
using  logarithms,  and  have  known  errors. 

Smart,  W.M.  (1977).  TextBook  on  Spherical  Astronomy  sixth  ed.  (Cambridge  University 
Press,  Cambridge). 

Williams,  W.  Jr.  (1971).  Prediction  and  Analysis  of  Solar  Eclipse  Circumstances  National 
Technical  Information  Service  Technical  Report  NTIS  No.  AD726626  (Springfield, 
Virginia). 


CHAPTER 


Astronomical  Phenomena 

by  B.D.  Yallop  and  C.Y.  Hohenkerk 


9.1    GENERAL  ASPECTS  OF  THE  NIGHT  SKY 

The  configurations  and  phenomena  of  the  Sun,  Moon,  and  planets  as  seen  from 
the  Earth  arise  from  their  apparent  movement  in  the  sky.  Most  of  the  phenomena 
published  in  the  "Diary  of  Phenomena"  for  example,  are  geocentric;  the  remainder 
are  heliocentric. 

The  Earth  rotates  about  its  polar  axis  once  a  day  and  produces  an  apparent 
motion  of  the  night  sky  about  the  celestial  poles.  In  the  Northern  Hemisphere  the 
north  celestial  pole  is  elevated  above  the  horizon.  Facing  away  from  the  elevated 
celestial  pole,  an  observer  sees  the  Sun,  Moon,  planets,  and  stars  rise  in  the  east  and 
set  in  the  west.  They  reach  their  highest  altitude  as  they  cross  the  local  meridian. 
When  the  observer  turns  to  face  the  elevated  celestial  pole,  stars  nearest  the  pole 
neither  rise  nor  set.  They  become  circumpolar  and  cross  the  meridian  each  day 
once  above  the  pole  at  their  highest  altitude  and  once  below  the  pole  at  their 
lowest  altitude.  In  the  Northern  Hemisphere,  circumpolar  stars  appear  to  rotate 
about  the  north  celestial  pole  anticlockwise.  In  the  Southern  Hemisphere  the  effect 
is  reversed  and  they  appear  to  rotate  clockwise. 

Superimposed  on  the  diurnal  rotation  is  an  annual  rotation  caused  by  the 
Earth's  orbiting  the  Sun.  Since  the  stars  are  seen  by  the  naked  eye  after  sunset,  the 
constellations  appear  to  move  from  east  to  west,  and  to  return  to  the  same  position 
after  a  year.  Relative  to  the  Sun,  the  stars  rise  and  set  roughly  four  minutes  earlier 
each  day.  In  the  course  of  a  month,  the  night  sky  appears  to  move  two  hours  in 
right  ascension  to  the  west.  Also  because  of  this  orbital  motion  of  the  Earth,  the 
circumpolar  stars  in  the  Northern  Hemisphere  appear  to  rotate  once  a  year  in  an 
anticlockwise  direction  around  the  north  celestial  pole  and  in  a  clockwise  direction 
about  the  south  celestial  pole. 

475 


476  EXPLANATORY  SUPPLEMENT 

The  Moon  moves  in  an  orbit  inclined  to  the  ecliptic  by  6°;  the  Moon  makes  one 
revolution  about  the  sky  from  west  to  east  in  about  a  month.  During  this  period 
the  phases  of  the  Moon  complete  a  cycle  from  new  to  full  and  back  to  new.  The 
orbit  of  the  Moon  is  moving  around  the  ecliptic,  so  that  other  aspects  of  the  Moon's 
position  in  the  sky,  such  as  its  maximum  and  minimum  declination,  change  from 
one  month  to  the  next. 

It  is  important  to  know  when  the  planets  are  in  the  most  favorable  position  for 
observation.  The  outer  planets,  for  example,  are  best  seen  around  opposition.  They 
are  in  their  most  unfavorable  position  around  conjunction.  The  inner  planets  are 
different — they  are  in  their  most  favorable  position  near  greatest  elongation,  even 
though  they  are  not  at  full  phase.  At  superior  conjunction  the  phase  is  around  full, 
but  the  planets  are  difficult  to  see  because  they  are  furthest  from  the  Earth  and 
usually  too  close  to  the  Sun.  At  inferior  conjunction  the  inner  planets  are  nearest 
to  the  Earth,  but  again  they  are  difficult  to  see  because  their  phase  is  small,  and 
they  are  too  close  to  the  Sun. 

Often  the  times  of  phenomena  need  not  have  any  great  precision;  sometimes  the 
nearest  hour  or  even  the  nearest  day  are  sufficient  for  observational  purposes.  The 
dates  and  times,  however,  usually  depend  on  the  coordinate  system.  For  historical 
reasons  the  conjunctions  and  oppositions  of  planets  have  always  been  calculated  in 
geocentric  ecliptic  coordinates.  On  the  other  hand,  the  conjunctions  of  planets  with 
other  planets,  bright  stars,  or  the  Moon  have  always  been  calculated  using  equato- 
rial coordinates;  the  phenomena  are  then  observed  more  easily  with  an  equatorially 
mounted  telescope.  In  some  cases  the  times  of  phenomena  have  been  defined  as  the 
maxima  or  minima  of  the  distances  from  the  Sun  or  the  Earth  or  the  elongation 
from  another  body.  In  such  cases,  the  phenomena  are  independent  of  the  coordinate 
system. 

9.2    CONFIGURATIONS  OF  THE  SUN,  MOON,  AND  PLANETS 

The  Universal  Times  (UT)  of  the  principal  astronomical  phenomena  involving  con- 
figurations of  the  Sun,  Moon,  and  planets  are  given  in  The  Astronomical  Almanac 
pages  Al-All  under  the  heading  "Phenomena".  In  most  cases  the  times  are  given 
to  the  nearest  hour,  but  for  certain  heliocentric  phenomena  of  the  planets,  only 
the  date  appears.  The  times  of  the  phenomena  of  greatest  general  interest — the 
beginning  of  the  seasons  and  the  phases  of  the  Moon — are  to  the  nearest  minute, 
although  the  accuracy  is  of  no  significance. 

Times  may  be  calculated  using  a  daily  tabular  ephemeris.  For  quantities  that 
vary  slowly  with  time,  such  as  planetary  apsides,  a  tabular  interval  of  five  days  gives 
better  results.  On  the  other  hand,  quantities  such  as  the  phases  of  the  Moon  vary 
rapidly,  and  a  shorter  interval  of  a  half  or  quarter  day  is  more  appropriate.  If  the 
ephemeris  is  in  TDT,  then,  to  convert  to  UT,  add  the  correction  AT"  =  UT  -  TDT 
to  the  time  obtained  at  the  end  of  the  calculation. 


9  /  ASTRONOMICAL  PHENOMENA  477 

The  time  t  of  the  phenomenon  derives  from  a  functional  expression  involving 
the  parameters  associated  with  the  phenomenon.  The  time  of  the  phenomenon  is 
calculated  from  the  equation  /(f)  =  0  or  f'(t)  =  0,  where  f(f)  =  df(t)  I  dt. 


9.21    Interesting  Phenomena  of  the  Sun,  Earth,  and  Moon 

9.211  Equinoxes  and  Solstices  The  times  of  the  equinoxes  and  solstices  are  de- 
fined to  be  when  the  Sun's  apparent  ecliptic  longitude  As  is  a  multiple  of  90°;  i.e., 
it  is  calculated  from  /(f)  -  0,  where  /(f)  =  Xs  -  0°.  90°,  180°,  or  270°.  Thus  in 
the  northern  hemisphere,  for  the  spring  equinox  /(f)  -  Xs,  for  the  summer  solstice 
f(t)  =  Xs  —  90°,  for  the  autumn  equinox  /(f)  =  Xs  -  180°  and  for  the  winter  solstice 
f(t)  =  Xs  —  270° .  At  the  equinoxes  the  Sun  crosses  the  equator  when  the  length  of  the 
day  exceeds  the  length  of  the  night  due  to  refraction,  semidiameter,  and  parallax 
of  the  Sun.  At  that  time  the  lengths  of  the  day  and  night  are  approximately  equal 
everywhere. 

The  time  of  the  commencement  of  the  seasons  shows  a  progressive  change 
because  of  the  leap-year  cycle.  Because  the  period  of  revolution  of  the  Earth  about 
the  Sun  is  not  commensurate  with  the  Gregorian  calendar  year,  it  is  only  after  a 
complete  cycle  of  four  centuries  that  the  seasons  again  commence  at  approximately 
the  same  times.  In  the  present  century  the  latest  dates  for  the  seasons  occurred  in 
1903,  and  the  earliest  will  be  in  2000;  by  the  year  2096  the  seasons  will  begin  at 
their  earliest  possible  times  {see  Table  9.211.1). 


Table  9.211.1 

Time  of  Commencement  of  the  Seasons 


Spring 

Summer 

Autumn 

Winter 

d  h 

d  h 

d  h 

d  h 

Latest 

1903 

March  21  19 

June  22  15 

Sept.  24  06 

Dec.  23  00 

2000 

20  08 

21  02 

22  17 

21  14 

Earliest 

2096 

19  14 

20  07 

21  23 

20  21 

Note:  The  total  range  in  times  is  about  54  hours  in  each  case. 


9.212  Perihelion  and  Aphelion  of  the  Earth  In  the  "Diary  of  Phenomena,1'  the 
times  when  the  Earth  is  at  perihelion  (the  Sun  is  at  perigee)  are  defined  to  be 
those  for  which  the  Sun's  geometric  distance  R  is  a  minimum.  Likewise,  the  times 
when  the  Earth  is  at  aphelion  (the  Sun  is  at  apogee)  are  defined  to  be  when  R  is 
a  maximum.  Thus  if  t  is  the  time  of  perihelion,  it  is  calculated  from  the  equation 
f'{t)  =  0  where  /(f)  =  R.  The  times  do  not  always  agree  with  those  calculated  from 
the  times  when  the  Sun  is  at  perigee  or  apogee  in  its  mean  elliptical  orbit  (i.e.,  the 


478  EXPLANATORY  SUPPLEMENT 

time  t  when  the  mean  longitude  of  perigee  F  =  0,  or  apogee  F  —  180°  =  0)  because 
of  perturbations  by  the  planets. 

9.213  Phases  of  the  Moon  The  times  of  the  phases  of  the  Moon  are  tabulated  to 
the  nearest  minute  of  UT  in  The  Astronomical  Almanac  pages  Al  and  Dl  and  are 
given  to  the  nearest  hour  of  UT  in  the  "Diary"  on  pages  A9-A11.  They  are  the 
times  when  the  excess  of  the  Moon's  apparent  geocentric  ecliptic  longitude  XM  over 
the  Sun's  apparent  geocentric  ecliptic  longitude  is  0°,  90°,  180°,  or  270° — i.e.,  the 
times  when  /(f)  =  0  where  /(f)  =  XM  -  Xs  for  new  Moon,  /(f)  =  XM  -  Xs  -  90°  for 
first  quarter,  /(f)  =  \M  -  Xs  -  180°  for  full  Moon  and  /(f)  =  XM  -  Xs  -  270°  for  last 
quarter.  Because  the  times  are  determined  from  geocentric  coordinates,  they  are 
independent  of  location  on  the  Earth. 

Owing  to  the  rapid  variations  in  the  distance  and  velocity  of  the  Moon,  the 
intervals  between  successive  phases  are  not  constant,  and  it  is  not  possible  to  check 
these  times  by  differencing.  Moreover,  there  is  no  simple  prediction  formula  with 
which  to  make  a  comparison.  Examination  of  the  higher  differences  of  the  successive 
times  of  the  same  phenomenon  provides  a  check. 

The  phases  of  the  Moon  do  not  recur  on  exactly  the  same  dates  in  any  regular 
cycle,  but  the  approximate  dates  of  the  phases  in  any  year  can  be  found  from 
the  dates  on  which  the  phase  occurred  19  years  previously.  Thus  in  the  Metonic 
cycle,  in  which  19  tropical  years  are  nearly  equal  to  235  synodic  months  (new  moon 
to  new  moon),  the  phases  recur  on  dates  that  are  the  same  or  differ  by  one  or 
occasionally  two  days,  depending  on  the  number  of  intervening  leap  years  and  on 
the  perturbations  of  the  Moon.  For  example,  during  2000  the  dates  are  the  same 
as  in  1981  on  thirty  occasions,  and  differ  by  one  day  for  the  remaining  nineteen. 

Another  relevant  cycle  is  the  Saros,  which  consists  of  233  synodic  months  and 
equals  nearly  19  passages  of  the  Sun  through  the  node  of  the  Moon's  orbit;  not 
only  will  the  moon  phases  recur  but  eclipses  as  well.  Moreover  in  this  cycle  the 
Moon's  apse  makes  239  revolutions  and  returns  to  nearly  the  same  position,  so  the 
durations  of  solar  eclipses  are  similar  as  well. 

9.22   Geocentric  Phenomena 

The  times  of  geocentric  phenomena  are  calculated  from  the  expressions  for  /(f) 
listed  below.  Table  9.22.1  contains  the  phenomena  for  which  the  time  is  obtained 
from  the  equation  /(f)  =  0.  Table  9.22.2  contains  phenomena  for  which  the  time  is 
obtained  from  the  equation  /'(f)  =  0.  In  this  table,  except  for  the  stationary  points 
in  right  ascension,  the  phenomena  are  independent  of  the  coordinate  system. 

The  notation  A,  a,  6  refers  to  the  apparent  geocentric  longitude,  right  ascension, 
and  declination;  and  the  subscripts  S,  M,  p.  b  refer  to  the  Sun,  Moon,  planet,  or 
bright  star,  respectively.  The  distances  r,  R,  A,  and  p  refer  to  the  geometric  distances 
of  the  Sun-planet,  Earth-Sun,  Earth-planet,  and  Earth-Moon,  respectively;  7r  is 


/  ASTRONOMICAL  PHENOMENA 


Table  9.22.1 

Geocentric  Phenomena  for  which  /(f)  =  0 


Phenomenon 


/(f) 


Remarks 


Seasons: 
Vernal  Equinox 
Summer  Solstice 
Autumnal  Equinox 
Winter  Solstice 


As 
As  -  90° 
As-  180° 
As  -  270° 


Conjunctions  ol  the  planets  with  the  Sun: 

Inferior  planets: 
interior  conjunction 
superior  conjunction 

Superior  planets: 
conjunction 
opposition 


V 


As 
As 

As 
180° 


Phases  of  the  Moon: 
New  Moon 
First  Quarter 
Full  Moon 
Last  Quarter 


Ap  -  As 


Am  -  As 
A„  -  AS  -  90° 
A„-AS^180° 
AM  -  AS  -  270° 


Conjunctions  of  other  bodies: 

planet  with  planet  »p,  -  "p? 

planet  with  bright  star  ap  -  ab 

Moon  with  planet  "u  -  ap 

Moon  with  bright  star  otM  -  ab 


March  equinox,  First  Point  of  Aries 
June  solstice 
September  equinox 
December  solstice 


Ap  -  As  changes  from  plus  to  minus 
Ap  -  As  changes  from  minus  to  plus 


separation  =  6Pl  -  fipj 
separation  =  6P  —  6/, 
separation  =  %  —  Sp 
separation  =  6M  -  Sb 


Table  9.22.2 

Geocentric  Phenomena  for  which  /  (f)  =  0 


Body 


Phenomenon 


fit) 


Remarks 


Mercury  Greatest  elongation 
Venus 


Venus 
Earth 

Moon 


Mars 
Planet 


Greatest  brilliancy 
Apsides 

Apsides 


Closest  approach 
Stationary  in 
right  ascension 


-28°  <  E  <  +28° 
-47°  <  E  <  +47° 


(r  +  A  +  R)(r+A- R)     Q  gg  AU  <  A  <  o.  47  AU 


r=R 

p  =  1  /  sin  w 


A 


At  perihelion  r  is  a  minimum 
At  aphelion  r  is  a  maximum 
At  perigee  p  is  a  minimum 
At  apogee  p  is  a  maximum 
At  perigee  jt  is  a  maximum 
At  apogee  *  is  a  minimum 


480 


EXPLANATORY  SUPPLEMENT 


the  horizontal  parallax  of  the  Moon.  The  five  bright  stars  used  in  the  "Diary"  are 
Atdebaran,  Pollux,  Regulus,  Spica,  and  Antares. 

The  following  formulas  are  useful  for  calculating  elongation  and  longitude: 

cos  E  =  sin  Sp  sin  <SS  +  cos  6p  cos  <5S  cos(ap  —  as),  (9.22-1) 

sin  e  sin  6  +  cos  e  cos  6  sin  a 

tan  A  =  ,  (9.22-2) 

cos  o  cos  a 


where  e  is  the  true  obliquity  of  the  ecliptic. 

9.221  Visibility  of  Planets  Table  9.221.1  shows  the  criteria  adopted  for  the  "Di- 
ary" for  the  minimum  elongations  from  the  Sun  at  which  Mercury,  the  bodies  used 
in  navigation,  and  the  minor  planets  can  be  seen  with  the  naked  eye. 


Table  9.221.1 

Visibility  Criteria  for  Geocentric  Phenomena 


Body 

Minimum  Elongation 

Moon,  Mars,  Saturn 

15° 

Minor  planets 

15° 

Venus,  Jupiter 

10° 

Mercury 

10°  +  visual  magnitude  of  Mercury 

9.222  Synodic  Periods  Once  the  date  and  time  of  a  geocentric  phenomenon  are 
known,  the  approximate  time  of  the  next  similar  phenomenon  may  be  estimated  by 
adding  the  synodic  period  T  of  the  body  concerned.  The  eccentricities  of  the  orbits 
of  the  Earth  and  the  body,  and  the  perturbations  by  other  bodies,  will  introduce 
errors  in  this  estimate.  Table  9.222.1  gives  synodic  periods  of  the  major  planets  and 


Table  9.222.1 

Synodic  Periods  of  the  Planets  and  First  Asteroids 


Planet 

Days 

Planet 

Days 

Asteroid 

Days 

Mercury 

116 

Saturn 

378 

Ceres 

467 

Venus 

584 

Uranus 

370 

Pallas 

466 

Mars 

780 

Neptune 

367 

Juno 

474 

Jupiter 

399 

Pluto 

367 

Vesta 

504 

9  /  ASTRONOMICAL  PHENOMENA 


481 


Table  9.222.2 

Long-Period  Cycles  of  Mercury,  Venus,  and  Mars 


For  Mercury 

54  sidereal  periods  = 

=      13  years  + 

2  days 

137  sidereal  periods  = 

=      33  years  — 

1  day 

For  Venus 

13  sidereal  periods 

:       8  years  — 

1  day 

359  sidereal  periods  = 

=     243  years  - 

I  day 

For  Mars 

8  sidereal  periods 

15  years  + 

1 7  days 

17  sidereal  periods 

32  years  - 

9  days 

25  sidereal  periods  = 

47  years  + 

8  days 

42  sidereal  periods  = 

79  years  - 

1  day 

the  four  brightest  minor  planets.  The  periods  may  be  used  for  a  systematic  search 
for  geocentric  phenomena. 

The  synodic  period  T  is  calculated  from  the  mean  motion  of  the  planet,  np,  and 
the  mean  motion  of  the  Earth,  ne.  Thus, 

360^  360^ 

T  ~  —   for  inner  planets,     and    T   for  outer  planets.  (9.222-1) 

np  —  ne  ne  —  np 

For  the  slowly  moving  planets  (Jupiter  to  Pluto)  and  the  minor  planets,  the 
error  in  using  these  values  is  small,  but  for  Mercury,  Venus,  and  Mars,  the  mean 
synodic  period  is  less  useful.  Much  more  accurate  estimates  of  when  these  planets 
may  be  seen  again  in  the  same  part  of  the  sky  may  be  made  by  using  long-period  cy- 
cles that  contain,  with  varying  degrees  of  accuracy,  integral  numbers  of  revolutions 
of  the  Earth  and  the  planet.  (See  Table  9.222.2.) 

Any  particular  phenomenon  of  a  planet  repeats  itself  after  each  cycle  at  the 
same  time  of  year  and  in  the  same  part  of  the  sky;  However,  repetition  does  not 
occur  after  a  single  synodic  period.  For  Venus  a  useful  and  accurate  form  of  the 
relation  is 

5  mean  synodic  periods  =  8  calendar  years  —  214,  (9.222-2) 
unless  the  interval  includes  a  century  year  that  is  not  a  leap  year. 

9.23   Heliocentric  Phenomena 

Certain  heliocentric  phenomena  of  the  planets  are  given  in  The  Astronomical  Al- 
manac, page  A3.  The  dates  of  perihelion  and  aphelion  are  those  on  which  the 
geometric  distance  of  the  planet  from  the  Sun  is  a  minimum  and  maximum  re- 
spectively; the  dates  are  thus  the  times  when  the  first  derivative  of  the  distance  is 
zero — j _e-5  f'(t)  -  drldt  =  0.  Owing  to  the  presence  of  perturbations  in  the  planetary 


482 


EXPLANATORY  SUPPLEMENT 


Table  9.23.1 

Heliocentric  Phenomena 


Phenomenon        /(f)      Type  Remarks 


Nodes  b      /(f)  =  0     At  the  descending  node,  b  is  decreasing. 

At  the  ascending  node,  b  is  increasing. 
Apsides  r      /'(f)  =  0    At  aphelion,  r  is  a  maximum. 

At  perihelion,  r  is  a  minimum. 
Greatest  latitudes      b     /'(f)  =  0    At  greatest  latitude  North,  b  is  positive. 

At  greatest  latitude  South,  b  is  negative. 


motion,  these  dates  may  differ  from  those  obtained  from  the  angular  elements  of  the 
mean  orbits.  The  actual  disturbed  motion  of  the  planets  is  also  used  to  determine 
the  dates  when  they  pass  through  the  nodes  on  the  ecliptic,  and  when  they  reach 
greatest  latitudes  north  or  south.  At  the  nodes,  the  heliocentric  latitude  is  zero;  i.e., 
/(f)  =  b  =  0.  The  value  of  /(f)  changes  from  negative  to  positive  at  the  ascending 
node,  and  from  positive  to  negative  at  the  descending  node.  These  dates  are  given 
each  year  for  Mercury,  Venus,  and  Mars,  but  they  occur  less  frequently  for  the 
other  planets,  and  in  these  cases  are  given  as  additional  notes  when  necessary.  The 
dates  on  which  a  planet  has  its  greatest  latitude  north  or  south  is  determined  as 
the  times  at  which  the  first  derivative  of  the  latitude  is  zero— i.e.,  /'(/)  -  dbldt  =  0. 
Table  9.23.1  shows  /(f)  for  the  various  phenomena. 


9.3    RISINGS,  SETTINGS,  AND  TWILIGHT 

The  astronomer  is  concerned  with  the  phenomena  of  rising,  setting,  and  twilight 
primarily  in  regard  to  the  planning  of  observations.  Precision  of  better  than  a  minute 
of  time  is  not  required  for  this  purpose,  and  extensive  tables  of  these  phenomena 
are  in  The  Astronomical  Almanac,  pages  A14-A77. 

The  tabulated  times  of  the  phenomena  refer  to  sea  level  with  a  clear  horizon  and 
an  adopted  correction  for  refraction  under  normal  meteorological  conditions.  The 
actual  times  of  rising  and  setting  may  differ  considerably,  especially  near  extreme 
conditions  when  the  altitude  is  changing  slowly.  This  difference  can  reach  half  a 
minute  of  time  at  mid-latitudes  and  more  at  high  latitudes.  The  illumination  at 
the  beginning  or  end  of  twilight  also  varies  greatly  with  meteorological  conditions. 
Precise  times  have  little  real  significance,  except  in  special  circumstances,  such  as 
navigation  at  sea. 

No  data  are  given  for  the  times  of  rising  and  setting  of  planets.  Data  may  be 
obtained  fairly  simply  from  navigation  tables  such  as  the  Sight  Reduction  Tables 


9  /  ASTRONOMICAL  PHENOMENA  483 

for  Air  Navigation.  Within  their  range  of  declination  (0°-29°),  these  tables  may 
also  be  used  to  find  the  times  of  rising  and  setting  of  stars. 

Section  9.33  gives  algorithms  that  may  easily  be  programmed  into  a  small 
calculator  or  computer  to  calculate  the  times  of  the  phenomena. 

9.31    Sunrise,  Sunset,  and  Twilight 

The  data  given  in  The  Astronomical  Almanac  enable  the  times  of  sunrise,  sunset, 
and  the  beginning  and  end  of  civil,  nautical,  and  astronomical  twilight  to  be  found 
for  any  position  between  latitudes  66°  north  and  55°  south.  The  times,  tabulated 
for  every  fourth  day,  are  the  local  mean  times  of  the  phenomena  on  the  meridian 
of  Greenwich  and  in  the  specified  latitude;  interpolation  is  necessary  to  obtain  the 
local  mean  times  for  intermediate  latitudes,  for  intermediate  days,  and  for  longitude. 
To  an  accuracy  of  about  five  minutes  this  interpolation  can  generally  be  done  by 
sight;  near  limiting  conditions,  when  interpolation  becomes  difficult,  large  changes 
of  time  correspond  to  only  small  changes  in  depression  and  accurate  times  have 
little  real  meaning. 

Interpolation  for  latitude  is  nonlinear.  Interpolation  for  longitude,  which  is 
rarely  justified,  can  be  combined  with  the  interpolation  for  date  by  increasing  for 
west  longitudes,  or  decreasing  for  east  longitudes,  the  Greenwich  date  by  the  ap- 
propriate fraction  (longitude  in  degrees/360);  for  sunrise  and  sunset,  the  error  due 
to  neglecting  the  variation  with  longitude  amounts  to  a  maximum  of  two  minutes 
in  latitudes  up  to  60°.  The  times  so  obtained  are  local  mean  times,  which  can 
be  converted  to  universal  time  by  applying  longitude  in  time — adding  if  west  and 
subtracting  if  east.  Standard  times  are  obtained  by  adding  (subtracting)  to  the 
local  time  four  minutes  for  every  degree  of  longitude  west  (east)  of  the  standard 
meridian. 

At  the  tabulated  times  of  sunrise  and  sunset,  the  geocentric  zenith  distance 
of  the  center  of  the  Sun  is  90°50';  i.e.,  a  geocentric  altitude  of  -50',  of  which  34' 
is  allowed  for  horizontal  refraction  and  16'  for  semidiameter;  the  Sun's  apparent 
upper  limb  is  thus  on  the  horizon.  Corrections  are  necessary  if  some  other  value  of 
the  altitude  is  required,  (such  as  for  the  conventional  meteorological  value  of  -34  ) 
or  to  allow  for  the  height  of  the  observer  and  the  elevation  of  the  actual  horizon. 
In  such  cases  use  Equation  9.31-1. 

At  the  times  given  for  civil,  nautical,  and  astronomical  twilight,  the  altitude  of 
the  center  of  the  Sun  is  -6°,  -12°  and  -18°  respectively.  These  tabulations  will 
produce  times  for  any  desired  altitude  between  -50'  and  —18°. 

The  Nautical  Almanac  and  The  Air  Almanac  tabulate  the  times  of  sunrise, 
sunset,  and  the  beginning  and  end  of  civil  twilight  (altitude  -6°)  every  three  days 
for  latitudes  between  72°  north  and  60°  south;  times  of  the  beginning  and  end 
of  nautical  twilight  (altitude  -12°)  are  also  in  The  Nautical  Almanac.  The  Air 
Almanac  provides  graphs  that  enable  corrections  to  the  time  of  sunrise  or  sunset. 


484  EXPLANATORY  SUPPLEMENT 

These  corrections  give  the  times  at  which  the  Sun  has  altitudes  between  0°  and 
—  12°  (that  is,  depressions  to  12°). 

Sunrise  or  sunset  at  a  height  H  meters  above  the  level  of  the  horizon  occurs 
when  the  Sun's  altitude  is  approximately 

-50'  -2'.12V7/       (1'.17  fori*  in  feet),  (9.31-1) 

so  that  the  same  table  gives  corrections  for  height  to  the  times  of  sunrise  and  sunset. 
In  The  Air  Almanac  the  corrections  can  be  obtained  from  graphs.  The  constant  2. 12 
is  really  a  slowly  decreasing  function  of  H,  but  below  a  height  of  about  5000  m  it  is 
constant;  it  decreases  to  a  value  of  2.00  at  100000m. 

Times  of  rising  and  setting  and  associated  phenomena  change  rapidly  from 
day  to  day  in  polar  regions  or  may  not  occur  for  long  periods,  the  Sun  being 
continuously  above  or  below  the  horizon;  accurate  times  are  therefore  difficult  to 
tabulate.  Diagrams  are  given  in  The  Air  Almanac  that  enable  approximate  times 
that  are  sufficiently  accurate  for  all  practical  purposes  to  be  obtained. 

9.311  A  Low  Precision  Ephemeris  for  the  Sun  The  following  algorithm  gives  the 
equation  of  time  (E),  the  Greenwich  hour  angle  (GHA),  declination  (6),  and  semidi- 
ameter  {SD)  of  the  Sun,  in  degrees,  to  a  precision  of  better  than  l'.O,  which  can 
be  used  with  the  algorithm  for  rising  and  setting  (see  Section  9.33).  The  equation 
of  time  is  also  useful  for  erecting  sundials  and  determining  the  transit  time  of  the 
Sun. 

(1)  Using  the  Jul  ian  date,  JD,  and  the  universal  time,  UT,  in  hours,  calculate 
T,  the  number  of  centuries  from  J2000: 

T  =  (JD  +  UT  /  24  -  245 1545. 0)  /  36525.  (9.3 1 1-1 ) 


(2)  Calculate  the  Solar  arguments;  the  mean  longitude  corrected  for  aberration, 
L;  the  mean  anomaly,  G;  the  ecliptic  longitude,  A;  and  the  obliquity  of  the 
ecliptic,  e: 

L  =  280f 460  +  36000f 770  T,       remove  multiples  of  360°, 

G  =  357f 528  +  35999f 050  T, 

A  =  L+  lf915sinG  +  Of 020  sin  2G, 

e  =  23?4393  -0?01300r.  (9.311-2) 


9  /  ASTRONOMICAL  PHENOMENA 


485 


(3)  The  equation  of  time  E,  the  GHA,  6,  and  SD  are  given  by 

E  =  -  If  915  sin  G  -  Of 020  sin  2G  +  2f 466  sin  2A  -  Of 053  sin  4A, 
GHA  =  15UT  -  1 80°  +  £, 
b  =  sin- '(sine  sin  A), 

SD  =  Of  267/(1  —  0.017  cos  G).  (9.311-3) 

Plotting  the  position  of  the  apparent  Sun  relative  to  the  mean  Sun  (which  moves 
Uniformly  along  the  equator)  produces  the  analernmic  curve,  see  Figure  9.31 1.1.  The 
displacement  of  the  apparent  Sun  in  longitude  is  given  by  the  equation  of  time  (E) 
and  the  displacement  in  latitude  is  given  by  the  declination  (6).  The  progress  of 
the  apparent  Sun  throughout  the  year  is  indicated  at  the  beginning  of  each  month 
on  the  closed  curve.  The  analernmic  curve  plays  an  important  role  in  certain  types 
of  sundial. 

9-32   Moonrise  and  Moonset 

The  tables  in  The  Astronomical  Almanac  give,  for  every  day  and  for  a  range  of  lat- 
itudes from  66°  north  to  55°  south,  the  local  mean  times  of  moonrise  and  moonset 


486  EXPLANATORY  SUPPLEMENT 

for  the  meridian  of  Greenwich.  Interpolation  for  latitude  and  longitude  is  necessary 
to  obtain  local  times  for  other  places.  In  practice,  times  are  rarely  required  more 
accurately  than  to  within  about  five  minutes,  and  interpolation  can  be  done  men- 
tally. Formal  interpolation,  using  tables  such  as  are  given  in  The  Nautical  Almanac 
and  The  Air  Almanac,  yields  times  accurate  to  about  two  minutes.  The  times  ao 
obtained  may  be  converted  to  universal  time  or  standard  time  by  applying  longi- 
tude in  time — adding  if  west  and  subtracting  if  east.  Times  for  latitudes  between 
72°  north  and  60°  south  are  given  in  The  Nautical  Almanac  and  The  Air  Almanac. 
In  The  Air  Almanac  times  appear  in  graphical  form  above  72°  north,  right  up  to 
the  North  Pole. 

In  calculating  the  times  of  moonrise  and  moonset,  the  true  altitude  h  of  the 
center  of  the  Moon  is 

h  =  —34'  —  semidiameter  +  horizontal  parallax  (9.32-1) 

where  34'  is  allowed  for  horizontal  refraction;  depending  upon  the  distance  of  the 
Moon,  h  lies  in  the  range  5'  to  11'.  At  these  times,  the  upper  limb  of  the  Moon  is 
on  the  horizon;  no  allowance  is  made  for  phase.  At  a  height  of  H  meters  above  the 
horizon,  the  altitude  of  the  Moon  when  its  upper  limb  is  on  the  horizon  is  decreased 
by  2'A2Vh  (see  Section  9.331). 

The  Moon  revolves  round  the  Earth  and  makes  one  complete  revolution  relative 
to  the  Sun  in  a  synodic  month  of  mean  length  29.53  days;  in  that  time  the  Moon 
therefore  appears  to  lose  one  transit  across  any  meridian  and,  in  general,  one  rising 
and  one  setting.  During  each  month  there  is  therefore  no  moonrise  on  one  local  day 
(near  last  quarter)  and  no  moonset  on  one  local  day  (near  first  quarter).  In  high 
latitudes  the  times  of  the  phenomena  change  rapidly  from  day  to  day  and  may  not 
occur  for  long  periods,  the  Moon  being  continuously  above  or  below  the  horizon; 
in  these  extreme  conditions  the  times  of  moonrise  and  moonset  sometimes  decrease 
from  day  to  day,  instead  of  the  usual  increase  in  lower  latitudes,  and  it  is  possible 
to  have  two  moonrises  or  two  moonsets  during  the  same  local  day. 

9.33   Formulas  Associated  with  Rising  and  Setting 

Consider  first  an  algorithm  for  calculating  the  times  of  rising  or  setting  of  a  body 
at  true  altitude  h. 

The  GHA  and  declination  (6)  of  the  body  are  required  to  about  one  minute  of 
arc  as  a  function  of  UT.  For  the  Moon,  the  horizontal  parallax  7r  is  also  required. 
To  speed  up  the  calculation,  which  is  iterative,  it  is  convenient  to  express  GHA,  o, 
and  7r  as  daily  polynomials.  For  the  Moon  second-order  polynomials  are  required  for 
GHA  and  6,  and  first  order  for  tt.  For  other  bodies  like  the  Sun  and  the  inner  planets, 
first-order  polynomials  are  sufficient.  For  stars  and  outer  planets,  a  constant  daily 
value  for  declination  may  be  adopted.  Alternatively  low-precision  formulas  for  the 


9  /  ASTRONOMICAL  PHENOMENA  487 

ephemeris  of  the  Sun  (Section  9.311)  may  be  used.  For  the  Moon,  the  low-precision 
formulas  on  page  D46  of  The  Astronomical  Almanac  may  be  used. 

At  sunrise  and  sunset  the  apparent  altitude  of  the  upper  limb  on  the  horizon 
is  zero  and  hence  the  adopted  true  altitude  in  degrees  is  h  =  -50  /  60  -  0. 0353 i/r7 
where  H  is  the  height,  in  meters,  of  the  observer  above  the  horizon. 

Similarly  at  moonrise  and  moonset  the  apparent  altitude  of  the  upper  limb  on 
the  horizon  is  zero  and  the  adopted  true  altitude  h  =  -34/60+0. 7275?r -0.0353^. 
At  rise  and  set  of  a  star  or  a  planet,  the  apparent  altitude  of  the  body  is  zero;  hence, 
h-  -34  /  60-0. 0353 

Other  important  cases  to  consider  are  twilights:  civil  twilight  h  =  -6°,  nautical 
twilight  h  -  -12°,  and  astronomical  twilight  h  =  -18°. 

The  time  of  rise  or  set,  UT,  in  hours,  is  found  by  solving  iteratively  the  equation 


UT  =  UT0  -  (GHA  +  A  ±  /)/  15,  (9.33-1) 

where  the  plus  sign  is  used  for  rise  and  the  minus  sign  for  set,  and  t  is  the  hour 
angle  of  the  body  at  UTo,  which  is  given  by 

sin/i  -  sin  <p  sin  6 

cosf=  ;  » —  (9.33-2) 

cos  (p  cos  o 

and  <p  is  the  latitude  and  A  the  longitude  (positive  to  the  east). 

If  cos t  >  +l,set  t-0°; 

(9.33-3) 

If  cosf  <  -l,set  t=  180°. 

As  an  initial  guess,  set  UT0  =  12",  although  any  value  in  the  range  0"  to  24"  will 
do.  After  each  iteration,  add  multiples  of  24h  to  set  UT  in  the  range  0h  to  24h. 
Replace  UT0  by  UT  until  the  difference  between  them  is  less  than  0?008.  If  for 
several  iterations  cosf  >  1,  it  is  likely  that  there  is  no  phenomenon  and  the  body 
remains  above  the  true  altitude  h  all  day.  On  the  other  hand,  if  cos  /  <  - 1 ,  the  body 
remains  below  the  true  altitude  all  day.  In  each  lunation,  around  first  quarter,  there 
is  always  a  day  when  the  Moon  does  not  set,  and  another,  around  last  quarter,  when 
the  Moon  does  not  rise. 

At  latitudes  above  60°  the  algorithm  may  fail,  and  it  is  necessary  to  use  a  more 
systematic  approach.  If  hQ  is  the  adopted  true  altitude,  the  times  when  h  =  ho  where 

sink  -  &in4>  sin 6  +  cos  4>  cos  6  cos(GHA  +  A)  (9.33-4) 


are  the  times  of  rising  or  setting. 

These  roots,  if  they  exist,  will  lie  between  the  true  altitude  at  0h  and  24"  and 
the  maximum  and  minimum  altitudes  during  the  day.  The  maximum  and  minimum 


488  EXPLANATORY  SUPPLEMENT 

altitudes  occur  at  or  very  near  upper  and  lower  transit.  These  times  are  found  by 
setting  t  =  0  and  t  =  180  in  Equation  9.33-1  and  iterating. 

Only  for  the  Moon  at  high  latitudes  is  it  necessary  to  calculate  the  maximum 
and  minimum  altitudes  more  precisely.  This  calculation  is  done  by  fitting  a  second- 
order  polynomial  to  the  true  altitude  at  points  around  upper  or  lower  transit  and 
differentiating  with  respect  to  time  to  find  the  turning  point. 

9.331  The  Effects  of  Dip  and  Refraction  Dip  is  required  for  reducing  sights  made 
with  a  marine  sextant  and  for  calculating  the  true  altitude  of  a  body  at  rise  and 
set.  Dip  is  the  apparent  angle  between  the  geometric  horizon  (at  right  angles  to  the 
vertical)  and  the  visible  horizon.  For  an  observer  at  height  H  above  the  surface  of 
the  Earth,  dip  D(H)  =  \'.15\/H,  where  H  is  in  meters  (0'.97\/7/  if  H  is  in  feet)  (see 
Woolard  and  Clemence,  1966,  page  215). 

A  navigator  using  a  marine  sextant  sets  on  the  apparent  horizon  and  wants 
to  know  how  much  the  horizon  appears  to  be  below  the  horizontal  and  therefore 
only  needs  to  know  the  dip.  On  the  other  hand,  when  computing  the  times  of  rise 
or  set  of  a  body,  we  need  to  know  the  true  altitude  when  the  body  appears  to  be 
on  the  horizon,  which  involves  dip  and  the  refraction  between  the  horizon  and  the 
observer  R(H),  where  R(H)  -  0'.31\/H  and  H  is  in  meters  (or  0'.20\/77  if  H  is  in  feet). 

In  Figure  9.331.1,  O  is  the  observer  at  height  H  above  the  surface  of  the  Earth. 
S  is  the  body  at  rise  or  set,  and  A  is  the  observer's  horizon.  The  true  altitude  of  S 
from  the  vantage  point  A  is  —34'  due  to  refraction.  The  true  altitude  of  5  from  O  is 
the  true  altitude  at  A  -  D(H)  -  R(H)  =  -34'  -  V.15y/H  -  Q'.31Vh  =  -34'  -  2'A2y/H. 


Figure  9.331.1 

The  horizon  at  rising  or  setting 


g  /  ASTRONOMICAL  PHENOMENA 


489 


Refraction,  the  bending  of  light  as  it  passes  through  the  atmosphere,  is  illus- 
trated in  Figure  9.331.1  for  the  rising  or  setting  of  a  celestial  object.  The  follow- 
ing approximate  formulas  (Bennett,  1982),  are  valid  for  all  altitudes  and  standard 
meteorological  conditions.  More  precise  algorithms  are  given  in  Section  3.28.  The 
amount  of  refraction,  R,  is  given  by 


R(hu)  = 


0?0167 


tan(Aa  +  7.31/(fta+4.4))' 
where  h„  is  the  apparent  altitude.  Alternatively,  if  ft  is  the  true  altitude,  then 

0?0167 


(9.331-1) 


R(h)  = 


tan(/i  +  8.6/(/i  +  4.4))" 


(9.331-2) 


9.332  Time  for  a  Specified  Shadow  Length  The  lengths  of  shadows  depend  upon 
the  apparent  altitude  of  the  Sun,  ha.  The  true  altitude  h  of  the  Sun  is  needed  to 
find  the  required  time  where 

h  =  ha-&{K)  (9.332-1) 

and  R  is  the  refraction  at  apparent  altitude  ha  which  may  be  calculated  approxi- 
mately using  Equation  9.331-1.  Alternatively,  if  h  is  known  and  ha  is  required  use 
Equation  9.331-2  for  calculating  the  refraction  at  true  altitude  h  and  set 


ha  =  h+R(h). 


(9.332-2) 


9,333  Rates  of  Change  The  rate  of  change  of  hour  angle  with  altitude  may  be 
obtained  by  differentiating  the  altitude  as  shown  in  Equation  9.33-4.  Assuming 
that  A,  4>,  and  6  do  not  change  with  time,  then  the  change  in  time,  (At),  in  hours, 
for  a  given  change  in  altitude  (Ah),  in  degrees,  can  be  calculated  from  the  simple 
expression 

1 


At  = 


A  LHA  coso  sinZ 


Ah. 


(9.333-1) 


where  A  LHA  is  the  rate  of  change  of  hour  angle  per  hour  and  Z  is  the  azimuth. 
For  the  Sun,  A  LHA  =  15°  per  hour  and  for  the  Moon,  A  LHA  =  14?493  per  hour. 
Near  rise  and  set  when  h  ~  0°,  this  expression  can  be  further  simplified  to 


At  =  A  Ah, 


where    A  =  60  /  ( A  LHA  v^cos2^  -  sin2  6  ) , 


(9.333-2) 


and  At  is  now  in  minutes  of  time.  This  correction  is  accurate  to  within  a  few  minutes 
provided  A  does  not  exceed  20  and  Ah  does  not  exceed  a  few  degrees. 


490  EXPLANATORY  SUPPLEMENT 

9.334  Time  for  a  Specified  Azimuth  Another  interesting  problem  is  to  calculate 
the  time  when  the  azimuth  Z  of  a  body  takes  a  particular  value.  The  time  UT  is 
calculated  iteratively  from 

UT  =  UT0-(GHA  +  A±r)/  15,  (9.334-1) 

where  the  plus  sign  is  used  if  Z  <  180°  and  the  minus  sign  is  used  otherwise,  t  is 
calculated  from 

-ab±y/\  +  a2-b2 

cos  t  =  -  =  ,  (9.334-2) 

1  +  a1 

where  a  =  tan  Z  sin  <j>,  b  =  -  cos  <f>  tan  6  tan  Z,  and  the  plus  sign  is  used  if  90°  <  Z  < 
270°;  otherwise  use  the  minus  sign.  In  the  special  cases  Z  -  90°  and  Z  =  270°  or  if 
1  +  a2  -  b2  <  0,  then 

cos  t  =  —  b  I  a  =  tan  8 1  tan  <t>; 
If    cosf>+l,    set    cosr  =  +l;  (9.334-3) 
If    cos t  <  —  I,    set    cos r  -  —  I. 

Iterate  Equation  9.334-1  until  UT  differs  from  UT0  by  less  than  0f008. 

9.335  Times  of  Transit  Times  of  transit  are  required  to  low  precision  for  planning 
observations,  and  for  setting  instruments.  The  times  for  a  particular  place  may  be 
calculated  for  any  body  by  iterating  Equation  9.33-1  and  setting  /  =  0°.  For  the 
Sun,  the  transit  time  may  be  determined  from  12h  —  El  15,  where  E  is  the  equation 
of  time  given  in  Section  9.311. 


9.34  Illumination 

The  ground  illumination  (i.e.,  the  illuminance  on  a  horizontal  surface)  from  nat- 
ural sources  varies  considerably  during  the  day.  The  variation  of  the  illumination 
on  a  horizontal  surface,  in  clear  conditions,  on  the  surface  of  the  Earth  is  shown 
diagrammatically  in  Figure  9.34.1  as  a  function  of  altitude. 

This  section  contains  a  simple  method,  suitable  for  use  with  electronic  cal- 
culators, of  calculating  ground  illuminance  from  sunlight,  twilight,  and  moonlight 
based  on  data  published  by  the  Radio  Corporation  of  America  (RCA  Electro -Optics 
Handbook,  1974).  A  more  precise  method  is  available  in  United  States  Naval  Obser- 
vatory CircularNo.  171.  This  method  is  based  on  the  extensive  Natural  Illumination 
Charts  produced  by  Brown. 

Data  from  the  handbook  has  been  represented  by  sets  of  cubic  polynomials 
for  the  Sun  and  the  full  Moon  at  mean  distance,  for  various  ranges  of  altitudes, 


9  /  ASTRONOMICAL  PHENOMENA 


491 


-20  0  +20  +40  +-60  +80 

Altitude 


Figure  9.34.1 

Ground  illumination  from  various  sources 


in  Table  9.34.1.  The  illuminance  is  measured  in  lux  or  lumens  per  square  meter; 
however,  the  logarithm  of  the  illuminance  has  been  used  because  large  ranges  are 
involved,  and  also  the  sensitivity  of  the  human  eye  varies  in  proportion  to  the 
logarithm  of  intensity.  Thus  the  illuminance  /  in  lux  is  given  by 

log,0/  =  k  +  k*  +  hx2  +  hx3,  (9.34-1) 

where  x  =  h  I  90,  h  is  the  altitude,  and  /0,  l{,  l2,  1}  are  the  appropriate  set  of 
coefficients  given  in  Table  9.34.1  for  various  ranges  of  altitude.  To  obtain  the  total 


492 


EXPLANATORY  SUPPLEMENT 


Table  9.34.1 

Coefficients  for  Calculating  Ground  Illumination 


From  the  Sun 

Maximum 

Altitude  range 

to 

•1 

i 

•2 

fa 

error 

20° 

90° 

3.74 

3.97 

-4.07 

1.47 



0.02 

5 

20 

3.05 

13.28 

-45.98 

64.33 

0.02 

-0.8 

5 

2.88 

22.26 

-207.64 

1034.30 

0.02 

-5 

-0.8 

2.88 

21,81 

-258.11 

-658.36 

0.02 

-12 

-5 

2.70 

12.17 

-431.69 

-1899.83 

0.01 

-18 

-12 

13.84 

262.72 

1447.42 

2797.93 

0.01 

From  the  Full  Moon  at  Mean  Distance 

20° 

90° 

-1.95 

4.06 

-4.24 

1,56 

0.02 

5 

20 

2.58 

12.58 

-42.58 

59.06 

0.03 

-0.8 

5 

-2.79 

24.27 

-252.95 

1321.29 

0.03 

ground  illumination  from  the  Moon,  corrections  for  phase  and  parallax  must  also 
be  added  (see  Section  9.342). 

The  values  for  the  Sun  in  daylight  give  the  illuminance  from  direct  and  indirect 
sunlight  in  a  cloudless  sky.  The  values  for  indirect  sunlight  are  about  a  factor  of 
10  smaller.  If  the  sky  is  overcast,  the  values  for  indirect  sunlight  should  be  reduced 
by  about  a  factor  of  10,  and  if  the  sky  is  very  dark  by  about  a  factor  of  100.  A 
correction  of  21og|0(5/  50),  where  S  is  the  semidiameter  of  the  Sun  and  S0  is  the 
semidiameter  at  mean  distance,  should  be  added  to  the  daylight  illuminance  to 
allow  for  the  variable  distance  of  the  Sun  from  the  Earth. 

When  the  Sun  is  below  the  horizon,  the  sky  is  illuminated  from  the  sources 
discussed  in  the  following  sections. 

9.341  Twilight  This  is  caused  by  the  scattering  of  sunlight  from  the  upper  layers 
of  the  Earth's  atmosphere.  It  begins  at  sunset  (ends  at  sunrise)  and  is  conven- 
tionally taken  to  end  (or  begin)  when  the  center  of  the  Sun  reaches  an  altitude 
of  -18°.  At  an  altitude  of  -18°,  astronomical  twilight,  the  indirect  illumination 
from  the  Sun  on  a  horizontal  surface  is  about  6  x  10~4  lux,  rather  less  than  the 
contribution  from  starlight  and  airglow.  The  actual  brightness  of  the  sky  depends 
on  where  the  observer  looks  and  where  the  illumination  is  coming  from,  as  well  as 
on  meteorological  conditions. 

In  navigational  practice  and  for  certain  civil  purposes,  two  intermediate  steps 
in  the  twilight  period  are  recognized  and  tabulated:  civil  twilight  ends  (or  begins) 
when  the  Sun  reaches  an  altitude  of  -6°  and  nautical  twilight  ends  (or  begins) 
when  the  Sun  reaches  an  altitude  of  -12°.  Before  morning  and  after  evening  civil 
twilight,  outdoor  activities  that  depend  on  natural  lighting  require  artificial  illu- 
mination. The  degree  of  illumination  at  the  beginning  and  end  of  civil  twilight  (in 


9  /  ASTRONOMICAL  PHENOMENA  493 

good  conditions  and  in  the  absence  of  other  illumination)  is  usually  described  for 
navigational  purposes  as  illumination  such  that  the  brightest  stars  are  visible  and 
the  sea  horizon  is  clearly  defined;  for  the  beginning  and  end  of  nautical  twilight, 
the  corresponding  statement  is  that  the  sea  horizon  is  in  general  not  visible  and  it 
is  too  dark  for  the  observation  of  altitudes  with  reference  to  the  horizon. 

9.342  Moonlight  The  illumination  received  from  the  Moon  varies  according 
to  phase,  altitude,  and  atmospheric  extinction.  From  full  Moon  in  the  zenith,  the 
intensity  of  illumination  on  a  horizontal  surface  is  approximately  0. 27  lux,  equiv- 
alent to  that  from  the  Sun  at  an  altitude  of  about  —8°.  The  amount  of  ground 
illumination  at  night  from  moonlight — log10A/,  where  M  is  the  illuminance  in  lux — 
may  be  calculated  from  L\,  the  ground  illumination  from  a  Full  Moon  at  altitude 
h,  at  a  mean  distance  that  has  been  corrected  for  phase  (Li)  and  parallax  (L3)  as 
follows: 

log!0  M  =  L,  +  L2  +  £3.  (9.342-1) 
Extracting  the  appropriate  set  of  /'s  from  the  table  and  setting  x  =  h  I  90,  where  h 
is  the  altitude  of  the  Moon,  then 

Li  -  k  +  l\x  +  I2X2  +  /3JC3, 

L2  =  -8.68  x  10_3/-2.2x  \0~9f,  (9.342-2) 
L3  =  21og10(7r/0.951), 
where  /=180-E 

and    cos  E  =  sin  6<,  sin  &m  +  cos  6s  cos  6m  cos(ctM  —  as)- 


Figure  9.34.1  also  shows  the  ground  illumination  on  a  horizontal  surface  from  the 
standard  phases  of  the  Moon  at  mean  distance  and  at  various  altitudes.  The  half 
Moon  gives  only  one-ninth  as  much  light  as  the  full  Moon.  For  astronomical  obser- 
vations, the  position  of  the  Moon  in  the  sky,  rather  than  the  general  illumination, 
is  the  most  important  factor. 

9.343  Starlight,  Airglow,  Aurora,  Zodiacal  Light,  and  Gegenschein  The  total  illu- 
mination from  the  stars  contributes  about  2.  2  x  10  4  lux,  rather  less  than  the  Sun 
at  the  beginning  and  end  of  astronomical  twilight.  The  illumination  from  the  stars 
together  with  airglow  contributes  about  2  x  10~3  lux.  The  illumination  from  the 
aurora  (which  depends  upon  solar  activity)  may  in  rare  cases  be  comparable  with 
moonlight.  The  other  sources  are  very  faint  and  never  give  an  illumination  greatly 
exceeding  that  from  starlight.  As  with  moonlight,  the  position  of  the  source  is  the 
most  important  factor  for  astronomical  observations. 


494 

9.4  OCCULTATIONS 


EXPLANATORY  SUPPLEMENT 


Only  dates  and  general  areas  of  visibility  for  the  occultations  of  planets  and  bright 
stars  by  the  Moon  are  published  in  The  Astronomical  Almanac.  Ranges  of  dates  of 
occultations  of  X-ray  sources  by  the  Moon  are  also  given.  The  International  Lunar 
Occupation  Centre,  Astronomical  Division,  Hydrographic  Department,  Tsukiji-5 
Chuo-ku,  Tokyo,  104  Japan  is  responsible  for  the  predictions  and  reductions  of 
timings  of  occultations  of  stars  by  the  Moon.  The  International  Occultation  Timing 
Association  (IOTA)  provides  predictions  of  occultations. 


9.41    Occultations  of  Stars 

Whenever  a  star  is  within  an  angular  distance  from  the  Moon  that  is  less  than 
the  sum  of  the  Moon's  horizontal  parallax  and  semidiameter,  it  will  be  occulted 
from  some  point  on  the  Earth.  The  large  number  of  occultations  make  it  impossible 
to  publish  maps  of  each  occultation  in  The  Astronomical  Almanac.  It  is  possible, 
however,  to  calculate  and  display  these  maps  on  a  personal  computer.  The  calcu- 
lations require  the  Besselian  elements,  which  are  defined  in  a  similar  way  to  those 
for  eclipses.  In  occultations,  the  fundamental  plane  passes  through  the  center  of 
the  Earth  and  is  perpendicular  to  the  line  joining  the  star  and  the  center  of  the 
Moon — i.e.,  to  the  axis  of  shadow.  The  origin  of  the  coordinates  is  the  center  of  the 
Earth;  the  jc-axis  is  the  intersection  of  the  Earth's  equator  with  the  fundamental 
plane  and  is  taken  as  positive  toward  the  east;  the  v-axis  is  perpendicular  to  that 
of  j:  and  is  taken  as  positive  toward  the  north  in  the  fundamental  plane.  The  great 
distance  of  the  star  implies  that  the  fundamental  plane  is  perpendicular  to  the  line 
joining  the  center  of  the  Earth  to  the  star,  and  that  the  Moon's  shadow  is  essentially 
a  cylinder  whose  intersection  with  the  fundamental  plane  is  a  circle  of  invariable 
size,  its  diameter  being  equal  to  that  of  the  Moon.  The  coordinates  of  the  center  of 
this  circle — i.e.,  the  axis  of  shadow — are  denoted  by  x  and  y.  The  adopted  unit  of 
linear  measurement  is  the  Earth's  equatorial  radius. 

The  Besselian  elements  are  given  for  one  instant  only — namely,  the  time  of 
conjunction  of  the  star  and  Moon  in  right  ascension,  when  x  is  zero.  They  are: 

To  =  the  UT  of  conjunction  in  right  ascension; 

H  =  the  Greenwich  hour  angle  of  the  star  at  To', 

Y  =  y  at  7b; 
x',y'  =  the  hourly  rates  of  change  in  x  and  y; 
as,  6S  =  the  right  ascension  and  declination  of  the  star. 


9  /  ASTRONOMICAL  PHENOMENA  495 

The  formulas  for  x  and  y,  the  coordinates  of  the  center  of  the  shadow  in  the 
fundamental  plane,  are 


x  sin  7T  =  cos  6  sin(a  —  as), 

y  sin  7T  =  sin  o  cos  bs  —  cos  c  sin  os  cos(a  —  as), 


where  a  and  6  are  the  right  ascension  and  declination  of  the  Moon  at  a  particular 
Universal  Time  and  tt  is  the  parallax. 

For  prediction  purposes  these  reduce  to 

x=a~as  cos 6,       y=  ^^+0.0087jc(a-af)  sin^,  (9.41-2) 

7T  7T 


where  a,  6,  and  n  are  in  degrees. 
At  conjunction 


n  6  —  6, 

x  =  0,  y=Y  = 


7T 


,      ,  ,  (9.41-3) 

a  cos  6  f>'  it' 

x'  =  ,  y'=°--Y-. 


7T  7T 


Here  the  primed  quantities  are  hourly  variations  that  arise  from  differentiating  the 
Moon's  daily  polynomial  coefficients  for  a,  6,  and  n. 

The  rectangular  coordinates  of  the  center  of  the  shadow  on  the  surface  of  the 
Earth  at  Universal  Time  f  from  conjunction  are  given  by 

x  =  x't, 

y  =  y't+Y,  (9.41-4) 


where  z  is  measured  along  the  shadow  axis  from  the  fundamental  plane  toward  the 
Moon.  The  longitude  and  latitude  (A,  <j>)  of  this  point  on  the  surface  of  the  Earth 
are  calculated  from 

4>  =  sin-1(ycos(5  +  zsini5), 

h  -  tan-1  7—^  -,  (9.41-5) 

— y  sin  6  +  z  cos  o 

\  =  h-(H+\Sx  1.0027380- 


496  EXPLANATORY  SUPPLEMENT 

The  rectangular  coordinates  of  the  edge  of  the  shadow  on  the  surface  of  the 
Earth,  (f ,  t),  (},  are  given  by 


£  =  x  —  k  sin  Q, 

r)  =  y-kcosQ,  (9.41-6) 

where  k  =  0. 2725  is  the  radius  of  the  Moon  in  Earth  radii  and  0  cycles  through  the 
range  0°  to  360°.  The  longitude  and  latitude  (A,  <f>)  of  a  point  on  the  edge  of  the 
shadow  is  obtained  from  Equation  9.41-5  by  replacing  (x,  %  z),  with  (£,  jj,  (). 

The  remainder  of  this  section  describes  how  to  plot  a  map  of  the  area  of  visibility 
of  an  occultation.  Project  the  longitudes  and  latitudes  of  the  continents,  islands, 
and  places  of  interest  onto  the  plane  that  passes  through  the  center  of  the  Earth 
and  is  perpendicular  to  the  direction  defined  by  a  vector  from  the  center  of  the 
Earth  to  the  place  \c,  <j>c.  Here  (Ac,  4>c)  is  the  longitude  and  latitude  of  the  center 
of  the  shadow  at  the  time  of  conjunction.  This  plane  rotates  with  the  Earth  and 
coincides  with  the  fundamental  plane  at  conjunction.  The  rectangular  coordinates 
of  a  place  at  longitude  and  latitude  (A,  <ft)  are  given  by 

u  =  cos  <j>  sin(A  -  Ac), 

v  =  sin  4>  cos  4>c  —  c°s  4>  sin  <f>c  cos(A  —  \c),  (9.41-7) 
w  =  sin  4>  sin  <j>c  +  cos  4>  cos  <j>c  cos(A  —  Ac), 

where  u  and  v  are  in  the  plane  (with  the  origin  at  the  center  of  the  Earth),  u  is  to 
the  east,  v  is  to  the  north,  and  w  is  the  height  of  the  place  above  the  plane;  w  >  0 
for  all  places  to  be  plotted. 

To  plot  the  edge  of  the  shadow  at  any  time  during  the  occultation,  calcu- 
late the  rectangular  coordinates  of  the  center  of  the  shadow  xq,  yo,  from  Equa- 
tion 9.41-4.  Then  calculate  the  coordinates  £,  rj,  (  of  the  edge  of  the  shadow  from 
Equation  9.41-6  and  obtain  the  corresponding  (A,  from  Equation  9.41-5.  Finally 
project  the  (A,  4>)  OI  the  shadow  outline  onto  the  same  plane  as  the  continents,  etc., 
using  the  coordinates  (u,  v)  in  Equation  9.41-7. 

When  £2  +  rj2  >  1,  the  shadow  is  only  partially  on  the  Earth.  To  find  the 
values  Q\  and  Q2  where  the  edge  of  the  shadow  cuts  the  surface  of  the  Earth,  see 
Figure  9.41.1,  where  O  is  the  center  of  the  Earth  and  S  is  the  center  of  the  shadow. 


9  /  ASTRONOMICAL  PHENOMENA 


497 


Figure  9.41.1 

Fundamental  plane  showing  path  of  occultation 


The  great  circle  arc  AB  between  the  polar  angle  8\  and  62  is  then  plotted  by 
setting  x  =  cos  9,  y  =  sin  9,  and  z  -  0,  and  using  Equations  9.41-5  and  9.41-7.  The 
polar  angles  are  found  as  follows:  Calculate  <2i  and  Q2  from 

sin(6i  +  5)  =  ^  1    and    Q2  =  180°  -  0,  2S, 

2kD 

where    D  =  J (x\  +  y§)    and    S  =  tan" 1  (y0  I  x0). 
Then  for  /  =  1  and  2 

6  ~x0  -k  sin  Qh 
Vi  =)'o  -  k  cos  Qit 
and    9i  =  tan"1  (17,-  /  £,),    0°  <  9t  <  360? 

The  total  area  of  visibility  of  the  occultation  may  also  be  plotted  by  repeating 
the  calculation  for  a  series  of  times  between  the  start  and  the  end  of  the  occultation 
on  the  same  diagram. 

A  similar  procedure  may  be  applied  for  predicting  the  areas  of  visibility  of 
occultations  of  planets  by  the  Moon. 


(9.41-8) 


(9.41-9) 


498 

9.42   Occultations  of  Planets 


EXPLANATORY  SUPPLEMENT 


The  prediction  of  occultation  of  stars  (or  minor  planets)  by  planets  (or  by  minor 
planets)  largely  centers  on  the  search  for  conjunction  in  right  ascension  within  the 
limits  of  difference  of  declination  that  make  an  occultation  possible.  These  limits 
are  very  small,  being  approximately  the  sum  of  the  horizontal  parallax  and  the 
semidiameter  of  the  planet. 

The  observations  themselves  yield  useful  information  on  the  diameters  of  plan- 
ets and  about  the  shape  of  minor  planets. 

The  actual  prediction  follows  the  basic  principles  underlying  those  for  eclipses, 
occultations,  and  transits;  but  more  direct  and  less  formal  methods  are  used  because 
the  angles  involved  are  much  smaller  and  the  prediction  much  less  precise. 

An  occultation  will  take  place  as  seen  from  some  point  on  the  Earth's  surface, 
provided  the  difference  8  —  6S  in  apparent  declination  at  the  time  of  conjunction  in 
right  ascension  satisfies  the  condition 

\6  -  6S\  <  (tt  +  s)/  \smp\,  (9.42-1) 

where  ir  and  s  are  respectively  the  equatorial  horizontal  parallax  and  semidiameter 
of  the  planet  and  p  is  the  position  angle  of  its  direction  of  motion.  Note  must  be 
taken  of  the  position  of  the  Sun,  as  for  lunar  occultation,  because  it  is  generally 
useless  to  predict  occultations  of  stars  in  daylight. 

Methods  of  prediction  are  described  by  Taylor  (1955);  the  paper  also  described 
the  determination  of  the  actual  limits  of  occultation.  The  IOTA  (see  Section  9.4) 
provides  predictions  of  planetary  occultations  that  are  published  in  Sky  and  Tele- 
scope and  the  Astronomical  Journal.  The  predictions  of  planetary  appulses  and 
occultations  are  also  published  in  The  Handbook  of  the  British  Astronomical  Soci- 
ety. 

9.5    POLE-STAR  TABLES 

The  proximity  of  the  second-magnitude  star  a  Ursag  Minoris,  (Polaris  or  the  Pole 
Star),  to  the  north  pole  of  the  sky  has  given  it  a  special  significance  for  the  con- 
venient determination  of  direction  and  latitude.  This  is  particularly  so  in  the  fields 
of  navigation  and  surveying,  for  which  the  Pole  Star's  constant  availability  for  ob- 
servations (in  northern  latitudes)  and  the  simple  methods  that  can  be  used  for  the 
reduction  of  observations  are  invaluable.  For  the  more  precise  requirements  of  as- 
tronomy, the  Pole  Star's  distance  from  the  true  pole  is  sufficiently  large  that  the 
special  methods  of  reduction  no  longer  confer  an  advantage  over  standard  meth- 
ods. Thus  Pole-Star  tables  are  restricted  to  the  precision  required  in  navigation  and 
surveying.  The  principal  table  with  the  precision  required  by  surveyors  is  included 
in  The  Astronomical  Almanac,  pages  B64-B67. 


9  /  ASTRONOMICAL  PHENOMENA  499 


Zenith 


Figure  9.5.1 

PZS  triangle  for  Polaris 


An  alternative  to  the  Polaris  table  is  to  use  expressions  involving  coefficients 
for  the  GHA  and  the  polar  distance  p  (see  Section  9.51).  These  coefficients  are 
provided  on  page  B63  and  include  the  5.5  magnitude  star  o  Octantis,  which  lies 
close  to  the  south  celestial  pole. 

If  the  polar  distance  of  Polaris  is  denoted  by  p  (of  the  order  of  one  degree)  and 
its  local  hour  angle  by  t,  then  its  altitude  h  and  azimuth  Z,  as  seen  from  an  observer 
in  latitude  (f>,  are  given  by  solving  the  spherical  triangle  (see  Figure  9.5.1)  formed 
by  the  North  Pole,  the  zenith,  and  Polaris,  S. 

Because  p  is  small,  the  solution  may  be  expanded  as 

h  =  <f>+p cos t  —  —p sin p  sin2  f  tan  4>  +  ■■■ , 

2  (9.5-1) 

Z  cos  <j>  =  p  sin  f  +  p  sin/?  sin  t  cos  t  tan  $  +  ■■■. 

In  each  case,  the  next  term  of  the  expansion  is  of  order  />sin2p  tan2  0  and  cannot, 
for  many  years,  exceed  O'.l  for  latitudes  up  to  70°. 


EXPLANATORY  SUPPLEMENT 

For  convenience  of  tabulation,  these  expressions  are  rewritten  in  the  form 


<f>  -  h  =  -  Oocos/o  -  -posinpo  sin2fotan0o) 
+  -  p0  sinpo  sin"  /0(tan  <t>  -  tan  <j>o) 

-  (p  cos  t  -  po  cos  t0)  -ao  +  ai+a2,  (9  5  ~ 
Z  cos  0  =  -  (p0  sin  t0  +  po  sinp0  sin  r0  cos  r0  tan  fa) 

-  po  sin  pa  sin  /0  cos  fo(tan  <p  -  tan  <fo) 

-  (p  sin  /  -  po  sin  t0)  =  b0  +  b]  +  b2, 

in  which  p0  and  ?0  are  the  polar  distance  and  hour  angle  of  a  convenient  point  close 
to  the  mean  position  of  Polaris  throughout  the  year,  and  cj>0  is  a  mean  latitude, 
usually  chosen  to  be  50°.  The  mean  position  of  Polaris  (which  must  not  be  confused 
with  its  mean  place)  is  usually  chosen  to  have  convenient  exact  values  for  its  right 
ascension  cto  and  polar  distance  p0. 

The  first  terms  (flo,&o)  in  the  modified  expressions  are  functions  of  a  single 
variable,  local  sidereal  time,  LST,  because 


t0  =  LST  -  q0  (9.5-3) 

and  may  be  tabulated  at  a  suitable  interval  of  LST. 

The  second  terms  (oi,f>i)  are  functions  of  t0  (i.e.,  of  LST)  and  of  latitude  and 

must  thus  be  tabulated  in  a  double-entry  table  with  arguments  LST  and  latitude. 

By  incorporating  a  mean  value  (corresponding  to  latitude  0O)  in  the  first  term, 

the  magnitude  of  these  terms  can  be  kept  down  to  about  0!5;  terms  may  thus  be 

tabulated  at  wide  intervals  of  latitude  and  LST. 

Similarly,  the  third  terms  (o2,  b2)  are  functions  of  r0  and  of  the  apparent  position 
of  Polaris  (i.e.,  of  date).  By  proper  choice  ofp0  and  o0,  the  magnitude  of  these  terms 
can  be  kept  down,  during  the  year,  to  about  0'.5;  and  they  can  also  be  tabulated  at 
wide  intervals  of  date  and  LST. 

As  will  be  seen  from  the  Polaris  table  in  The  Astronomical  Almanac,  the  single- 
entry  table  of  o0  and  b0  is  arranged  in  twenty  four  columns,  each  containing  values 
for  one  hour  of  LST;  this  arrangement  enables  separate  tables  of  a\  and  b\,  and 
of  a2  and  b2,  to  be  given  for  each  hour  of  LST.  In  the  column  corresponding  to 
the  hour  of  LST  all  these  terms  are  taken  from  single-entry  tables — the  first  with 
argument  minutes  and  seconds  of  LST,  the  second  with  argument  latitude,  and 
the  third  with  argument  date.  The  error  in  using  the  tables  for  the  hour,  without 
interpolation  for  LST,  is  greatest  for  the  second  term  b\  (owing  to  its  dependence 
on  sin  2  to)  and  may  reach  0'.15  for  extreme  latitudes;  otherwise  the  error  is  small. 


9  /  ASTRONOMICAL  PHENOMENA  501 

The  complications  of  these  tabulations  are  unnecessary  for  astronomical  use 
but  valuable  for  navigational  use,  in  which  simplicity  of  tabular  entry  and  of  inter- 
polation are  of  foremost  importance.  The  Polaris  table  in  The  Nautical  Almanac 
is  essentially  the  same  as  the  table  in  The  Astronomical  Almanac,  except  for  the 
intervals  of  tabulation  (1°  in  LST  or  LHA  of  the  first  point  of  Aries)  and  from  a 
further  simplification  for  the  user  by  adding  constants  (whose  sum  is  one  degree)  to 
AO,  flj,  a2  to  make  them  always  positive.  Since  lower  precision  is  required  in  azimuth 
the  b  coefficients  have  been  replaced  by  a  simpler  table  of  azimuth  as  a  function  of 
LHA  Aries  and  latitude. 


9.51    Derivation  of  the  Pole  Star  Coefficients 


The  Greenwich  hour  angle  (GHA)  and  polar  distance  (p)  are  expressed  as  series  of 
polynomial  terms  that  allow  for  precession  and  proper  motion,  and  also  as  series 
of  trigonometric  terms  that  contain  the  leading  terms  in  aberration  and  nutation. 
Thus 

GHA  =  ao  +a[L  +  a2  sinl  +  03  cosL  +  04  sin M  +  o5  cos M 
+  as  sin  2L  +  a-j  cos  2L  +  1 5UT, 

(9.51-1) 

p  =  «o  +  a \L  +  a2  sin Z.  +  0.1  cosL  +  04  s'mM  +  o5  cos /V/ 
+  oe  sin  2L  +  07  cos  2L, 

where  Oo,  «i.  -.,07  are  two  sets  of  constants  in  degrees,  UT  is  the  Universal  Time 
in  hours,  L  =  L'n,  M  =  Wn  (where  L'  and  J?'  are  the  rates  of  change  of  the  mean 
aberrated  longitude  of  the  Sun  and  the  mean  longitude  of  the  ascending  node  of  the 
Moon),  and  n  is  the  interval  from  the  beginning  of  the  period  to  the  time  required. 

The  coefficients  are  determined  by  the  method  of  least  squares.  Annual  coef- 
ficients are  derived  by  taking  daily  values.  Using  all  eight  coefficients,  the  annual 
fit  gives  maximum  errors  of  ±  0"2.  If  only  the  first  four  terms  are  used  in  the 
least-squares  approximation  then  the  maximum  errors  increase  to  ±  l'.'O.  Pole  Star 
coefficients  have  been  calculated  for  the  ten-year  period  2096  to  2105,  based  on  its 
FK4  position  and  proper  motion.  The  north  polar  distance  is  found  to  decrease  from 
its  present  value  of  about  48'  to  27'  10"  on  2100  March  20  and  will  then  increase. 
The  distance  will  reach  1°  by  about  2250  and  2°  by  about  2450.  (See  Figure  9.51.1.) 

The  Pole-Star  coefficients  may  be  used  to  calculate  the  UT  of  upper  culmination 
of  Polaris  (UC)  at  the  observer's  longitude,  the  UT  of  the  elongation  west  (EW), 
and  the  elongation  east  (EE)  at  the  observer's  longitude  and  latitude. 


502 


EXPLANATORY  SUPPLEMENT 


2100 


2104 


Year 


Figure  9.51.1 

Polaris  north  polar  distance  2096-2105 


Calculate  GHA0,  and  pQ  at  0"  UT.  Then  calculate  the  local  hour  angle  LHAo  - 
GHAq  +  A,  where  A  is  the  observer's  longitude.  Upper  culmination  occurs  at  time 


fh  _  360  -  LHAo 


15.041069 


(9.51-2) 


and  also  at  time  /h  —  23. 934  on  the  previous  day.  Elongation  east  and  elongation 
west  occur  at  times 

cos""1  (tan  i^tanpo) 


f  ± 


15.041069 


(9.51-3) 


where  the  plus  sign  is  used  for  EW,  and  the  minus  sign  for  EE,  and  <j>  is  the  observer's 
latitude.  If  necessary  add  or  subtract  23*934  to  the  time  of  the  phenomenon  to 
obtain  a  time  nearer  the  time  of  observation. 


9.6  REFERENCES 


Bennett,  G.G.  (1982).  "The  Calculation  of  Astronomical  Refraction  in  Marine  Navigation" 
J.  Inst.  Nav.  35,  255. 

Janiczek,  P.M.  and  DeYoung,  J. A.  (1987).  "Computer  Programs  for  Sun  and  Moon  Il- 
luminance with  Contingent  Tables  and  Diagrams"  United  States  Naval  Observatory 
Circular  171  (U.S.  Naval  Observatory,  Washington). 

Radio  Corporation  of  America  (1974).  "Sources  of  Radiation"  Electro- Optics  Handbook 
Section  6,  61. 


9  /  ASTRONOMICAL  PHENOMENA  5Q3 

Taylor,  G.E.  (1955).  "The  Prediction  of  Occupation  of  Stars  by  Minor  Planets"  J.B.A.A 
65,  84. 

Woolard,  E.W.  and  Clemence,  G.M.  (1966).  Spherical  Astronomy  215  (Academic  Press 
New  York). 


CHAPTER 


Stars  and  Stellar  Systems 

by  D.  Pascu,  J.A.  Mattei,  C.E.  Worley,  H.C.  Harris,  J.  Andersen,  W.P.  Bidelman, 
J.H.  Taylor,  G.  Lynga,  R.E.  White,  G.  de  Vaucouleurs,  TM.  Heckman, 
G,H.  Kaplan,  U.K.  Pauliny-Toth,  and  J.F.  Dolan 


Section 

Author 

Afhliation 

{10.1-10.15) 

Anonymous 

(10.2,  10.21) 

D.  Pascu 

U.S.  Naval  Observatory 

(10.22) 

J.A.  Mattei 

Am.  Assoc.  Variable  Star  Observers 

(10.23) 

C.E.  Worley 

U.S.  Naval  Observatory 

(10.24) 

H.C.  Harris 

U.S.  Naval  Observatory 

(10.25) 

J.  Andersen 

Copenhagen  Univ.  Astron.  Observatory 

(10.26) 

W.P.  Bidelman 

Case  Western  Reserve  University 

(10.27) 

J.H.  Taylor 

Princeton  University 

(10.31) 

G.  Lynga. 

Lund  Observatory 

(10.32) 

R.E.  White 

University  of  Arizona 

(10.33) 

G.  de  Vaucouleurs 

University  of  Texas 

(10.34) 

TM.  Heckman 

Johns  Hopkins  University 

(10.41) 

G.H.  Kaplan 

U.S.  Naval  Observatory 

(10.42) 

I.I.K.  Pauliny-Toth 

Max  Planck  Institute 

(10.43) 

J.F.  Dolan 

NASA/Goddard  Space  Flight  Center 

10.1    SOURCES  OF  DATA  ON  STARS  AND  STELLAR  SYSTEMS 

The  data  on  stars  and  stellar  systems  are  basically  provided  in  catalogs.  Positional 
star  catalogs  can  be  divided  into  types.  Observational  catalogs  provide  the  results 
of  observing  programs  with  a  given  instrument.  Compiled  catalogs  are  compilations 
of  observational  catalogs,  which  are  usually  assembled  over  an  extended  period  of 
time  so  that  proper  motions  of  stars  can  be  determined  as  well  as  positions. 

505 


506  EXPLANATORY  SUPPLEMENT 

Observing  programs  and  catalogs  can  be  classified  as  fundamental  or  differen- 
tial. In  fundamental  observing  programs,  the  coordinates  of  the  observations  are 
determined  independently  as  part  of  the  observing  program.  For  example,  the  pole, 
equator,  and  equinox  might  be  determined  from  observations  of  circumpolar  stars 
and  solar  system  objects.  Differential  observations  are  made  with  respect  to  star 
positions  from  a  reference  catalog.  All  photographic  and  small  field  observations 
are  differential. 

Special-purpose  catalogs  give  a  specific  type  of  data,  such  as  parallaxes,  radial 
velocities,  and  so  on. 

Heterogeneous  catalogs  are  a  collection  of  material  from  various  sources.  In 
many  cases,  the  catalogs  are  limited  to  a  region  of  the  sky,  a  range  of  magnitudes, 
or  a  given  type  of  object.  The  stars  are  identified  by  a  catalog  number  or  by  a 
constellation  name  and  designation.  A  limited  number  of  the  brightest  stars  have 
specific  names. 


10.1 1    Compiled  Catalogs  of  Stellar  Positions  and  Motions 

Compiled  catalogs  are  designated  by  a  systematic  reference  system  on  the  sky,  which 
is  based  on  a  selected  list  of  stars  included  in  the  catalog.  The  positions  and  proper 
motions  for  all  the  stars  are  on  the  same  system  of  coordinates.  Observational 
data  from  a  number  of  different  instruments  are  included  to  minimize  systematic 
instrumental  errors  and  to  achieve  the  optimum  accuracy.  Compiled  catalogs  are 
given  on  a  standard  equinox  and  epoch  such  as  1900.0,  1925.0,  1950.0,  or  2000.0. 
This  is  achieved  by  applying  proper  motion  and  precession  to  the  compiled  observed 
positions  made  at  different  times.  (Thus,  the  epoch  of  the  catalog  is  not  the  average 
date  of  the  observational  data  in  the  catalogs.) 

The  compiled  catalogs  can  be  grouped  into  two  series.  The  German  series  in- 
cludes The  Fundamental  Catalog,  The  Neuer  Fundamental- Catalog,  and  the  FK3, 
FK4,  and  FK5-Basic  catalogs.  The  American  series  of  catalogs  includes  Newcomb's 
catalog  of  fundamental  stars,  Eichelberger's  standard  stars,  the  GC  catalog,  and 
the  N30  catalog.  In  addition,  there  is  the  SAO  catalog,  which  is  a  heterogeneous 
combination  of  a  number  of  catalogs.  The  methods  for  converting  the  positions  from 
one  epoch  and  reference  system  to  another  epoch  and  reference  system  is  given  in 
Chapter  3.  Currently  in  preparation  are  the  Southern  Reference  Star  system,  the 
International  Reference  Star  system,  and  Part  II  of  the  FK5  catalog. 

In  the  future  it  is  expected  that  radio  sources  or  quasars  will  be  the  reference 
sources  to  which  astronomical  positions  will  be  referred.  These  sources  have  the 
advantage  of  lacking  apparent  motion  due  to  their  distance.  Thus  they  provide  a 
type  of  inertial  or  space  fixed  reference  system. 


10  /  STARS  AND  STELLAR  SYSTEMS 

10.12   Standard  Reference  Catalogs 


507 


Reference  catalogs  are  of  differing  types.  Some  compiled  reference  catalogs  are  inde- 
pendent sources  of  positions  and  proper  motions.  Examples  are  the  FK3,  FK4,  and 
FK5  catalogs.  Other  catalogs  are  dependent  on  the  independent  catalogs  to  deter- 
mine their  reference  positions.  Examples  are  the  AGK2  and  AGK3,  which  require 
the  FK  catalog  positions. 

Observational  catalogs  are  fundamental,  or  absolute,  if  the  reference  frame  can 
be  determined  from  the  observations  themselves.  The  independent  compiled  cata- 
logs must  include  some  fundamental  observational  catalogs.  They  can  also  include 
differential  observational  catalogs  where  the  observations  are  made  with  respect  to 
some  reference  catalog. 

Lists  of  star  catalogs  for  the  eighteenth  and  nineteenth  centuries  are  given  in  the 
volumes  of  Geschichte  des  Fixsternhimmels  (Karlsruhe,  1922-1957;  Berlin,  1952- 
1959).  A  further  list  for  the  period  1900-1925  is  given  in  Index  der  Sternorter  1900- 
1925  (Bergedorf,  1928).  Foremost  among  the  observational  catalogs  in  these  lists 
are  those  compiled  under  the  auspices  of  the  Astronomische  Gesellschaft  (A.G.)  as 
a  cooperative  effort  by  a  number  of  observatories.  This  series  of  volumes  was  begun 
in  1863,  and  gives  the  positions  of  all  stars  shown  in  the  Bonner  Durchmusterung 
(B.D.)  from  decimation  +80°  to  -18°  to  magnitude  9.0.  The  observations  made 
by  each  observatory  were  confined  to  a  narrow  zone  of  declinations  best  suited  to 
the  latitude  of  the  observatory.  In  more  recent  times  photography  has  been  used  to 
reobserve  the  A.G.  zones.  The  new  positions  are  given  in: 

AGK2  Zweiter  Katalog  der  Astronomischen  Gesellschaft  fur  das  Aquinoktium 
1950;  ten  volumes  cover  declination  +90°  to  +20°  (Hamburg-Bergedorf, 
1951-1954),  and  five  volumes  cover  decimations  +20°  to  -T  (Bonn,  1957- 
1958). 

AGK3  Zweiter  Katalog  der  Astronomischen  Gesellschaft  fur  das  Aquinoktium 
1973;  based  on  plates  taken  at  Bergedorf  between  1959  and  1961.  Proper 
motions  were  formed  using  AGK2  as  first-epoch  plates.  AGK3  R  is  the 
catalog  of  reference  stars  for  the  AGK3. 

Yale  Catalogs  of  the  zones  +85°  to  +90°,  +50°  to  +60°,  -30°  to  +30°,  and  -60° 
to  -90°  are  published  in  Transactions  of  the  Astronomical  Observatory 
of  Yale  University  (New  Haven,  1925  onward);  the  positions  are  also  for 
equinox  1950.0. 

Among  modern  reference  catalogs,  the  following  are  representative. 


GC  General  Catalogue  of  33342  Stars  for  the  Epoch  1950,  in  5  volumes,  Wash- 
ington, 1937.  These  catalogs  give  positions  and  proper  motions  of  all  stars 
brighter  than  magnitude  7,  and  also  include  thousands  of  fainter  stars. 


508 


EXPLANATORY  SUPPLEMENT 


FK3  Dritter  Fundamentalkatalog  des  Berliner  Astronomischen  Jahrbuchs,  I  Teil 
Veroffentlichungen  des  Astronomischen  Rechen- Institute,  no.  54,  1937.  This 
catalog  gives  positions  for  1925.0  and  1950.0  of  the  925  stars  of  Auwers' 
Neue  Fundamentalkatalog  (1910).  If  Teil:  Abhandlungen  der  Preussischen 
Akademie  der  Wissenschaften,  Phys.-Math.  Klasse,  no.  3,  1938.  This  cat- 
alog gives  the  positions  of  666  additional  stars  for  equinox  1950.0. 

FK4  Fourth  Fundamental  Catalog  (FK4),  Veroffentlichungen  des  Astronomis- 
chen Rechen-Instituts,  Heidelberg,  no.  10,  1963.  A  revision  of  FK3;  the 
re-examination  of  the  available  observations  showed  that  no  change  in  the 
equinox  was  justified. 

FK5  Fifth  Fundamental  Catalog  (FK5),  Part  1:  The  Basic  Fundamental  Stars. 
Veroffentlichungen  Astronomisches  Rechen-Institut,  Heidelberg,  no.  32,  1988 
A  revision  of  FK4;  the  re-examination  of  the  available  observations  showed 
that  changes  to  the  constant  of  precession  and  a  correction  to  the  equinox, 
both  at  the  epoch  and  as  a  function  of  time,  were  necessary.  See  Section  3.5 
for  the  transformation  between  the  FK4  and  the  FK5  system. 

N30  "Catalog  of  5268  standard  stars,  1950.0,  based  on  the  normal  system  N30," 
Astronomical  Papers  of  the  American  Ephemeris,  13,  part  III,  1952.  The 
positions  are  derived  from  more  than  70  catalogs  with  epochs  of  observation 
between  1917  and  1949. 

ZC  "Catalog  of  3539  zodiacal  stars  for  the  equinox  1950.0,"  Astronomical  Pa- 
pers of  the  American  Ephemeris,  10  part  II,  1940.  This  catalog  gives  posi- 
tions of  all  stars  to  magnitude  7  in  the  zodiacal  zone  as  well  as  the  positions 
of  many  fainter  stars.  It  is  intended  for  use  in  occultation  work.  It  is  based 
on  90  catalogs,  and  positions  are  reduced  to  the  FK3  system. 

PFKSZ  "A  preliminary  general  catalog  of  fundamental  faint  stars  between  de- 
clinations +90°  and  -20°,"  M.S.  Zverev  and  D.D.  Polozhentsev,  Publica- 
tions of  the  Main  Astronomical  Observatory  of  Pulkovo,  72,  1958. 


10.13  Observational  Positional  Catalogs 

Observational  data  from  a  given  instrument  over  a  period  of  time  are  usually  pub- 
lished as  a  catalog.  In  this  case,  the  data  have  been  reduced  in  a  systematic  manner 
and  are  published  on  some  reference  system,  either  on  the  system  of  a  compiled 
catalog  or  on  a  system  as  determined  by  the  instrument.  Because  the  method  of 
reduction  and  the  reference  system  can  vary  for  observational  catalogs,  the  intro- 
duction or  description  of  the  catalog  must  be  reviewed  carefully,  and  the  use  of 
observational  catalogs  and  the  combining  of  observational  catalogs  must  be  done 
with  care.  Observational  catalogs  usually  combine  a  number  of  observations  oi  a 
given  star  to  determine  the  position  of  that  star,  and  give  a  mean  epoch  for  the 
time  of  the  observations.  This  epoch  may  differ  from  the  epoch  of  the  reference 
system  on  which  the  stars  are  given.  Examples  of  observational  catalogs  are  the  ob- 
servations of  the  six-inch  transit  circle  in  Washington  (which  have  been  published 
in  the  Publications  of  the  U.S.  Naval  Observatory),  Greenwich  observations  (which 


10  /  STARS  AND  STELLAR  SYSTEMS  509 

have  been  published  in  the  Greenwich  Observations  series),  Radio  source  lists,  and 
many  other  observations  from  other  observatories. 


10.14  Other  Catalogs  and  Lists 

Compiled  catalogs  and  observational  catalogs  generally  deal  with  positions  and 
proper  motions  of  stars.  In  addition,  there  are  catalogs  of  double  stars  and  catalogs 
giving  the  radial  velocities,  parallaxes,  spectra,  and  other  characteristics  of  stars. 
In  some  cases,  the  catalog  can  be  based  on  single  observation  of  each  star;  in  other 
cases,  such  as  parallaxes,  many  observations  of  the  stars  are  necessary  in  order  to 
determine  the  parallaxes. 

10.15  Data  Centers  and  Their  Facilities 

With  the  introduction  of  data-processing  equipment,  organizations  use  the  equip- 
ment to  develop  a  collection  of  data  in  machine-readable  form.  The  data  include 
data  currently  being  developed  and  also  older  data  that  was  coded  into  machine- 
readable  form  for  analyses  purposes.  In  general,  these  data  collections  were  located 
at  the  places  actually  making  the  observations  or  at  the  ones  most  dependent  upon 
computer  analyses — for  example,  the  U.S.  Naval  Observatory,  Royal  Greenwich 
Observatory,  Astronomisches  Rechen-Institut,  and  Pulkova  Observatory. 

The  number  of  different  locations  for  collections  of  data  proliferated,  and  the 
need  for  central  data  centers  became  evident.  Therefore,  the  Centre  de  Donnees 
Stellaires  was  established  in  Strasbourg,  France.  Subsequently,  a  data  center  was 
established  at  the  NASA  Goddard  Space  Flight  Center.  These  two  organizations 
have  become  central  depositories  for  data.  They  obtain  copies  of  the  data  from 
previously  established  collections.  In  addition,  they  cross-index  and  consolidate  the 
information  from  many  different  systems  into  a  single  file  of  data  on  each  star. 

Computer  networks  allow  astronomers  to  directly  access  the  data  center  to 
obtain  the  most  current  information  of  the  desired  specific  data.  One  system— 
the  Set  of  Indentifications,  Measurements,  and  Bibliography  for  Astronomical  Data 
(SIMBAD)  system^allows  direct  access  to  the  computer  at  the  Strasbourg  data 
center  and  the  capability  to  obtain  all  the  current  information  concerning  a  specific 
star. 


1 0.2    STELLAR  DATA  I N  THE  ASTRONOMICAL  ALMANAC 

The  progenitors  of  The  Astronomical  Almanac  (The  Astronomical  Ephemeris  [AEJ, 
formerly  The  Nautical  Almanac,  and  The  American  Ephemeris  and  Nautical  Alma- 
nac [AENAJ)  have  always  included  stellar  data  in  the  form  of  lists  of  apparent 


51 0  EXPLANATORY  SUPPLEMENT 

places  and/or  mean  places  of  bright  stars.  Such  lists  were  used  by  astronomers  for 
the  positional  calibration  of  their  instruments  and  formed  the  basis  for  navigational 
and  surveying  almanacs.  The  precision  to  which  these  lists  were  published  varied 
from  Of  1  in  right  ascension  and  1"  in  declination,  to  0?001  in  right  ascension  and 
0!'01  in  declination.  With  the  publication  of  Apparent  Places  of  Fundamental  Stars 
in  1941,  the  number  of  apparent  places  printed  in  the  almanacs  was  greatly  di- 
minished, and  by  1957,  apparent  places  for  stars  were  omitted  altogether.  In  the 
1960  editions,  the  AE  and  AENA  were  unified  in  content,  but  kept  their  separate 
names.  The  purpose  and  scope  of  the  almanacs  had  also  evolved  considerably.  The 
emphasis  was  no  longer  on  the  "practical  requirements  of  navigators  and  survey- 
ors," but  on  the  "requirements  of  the  practical  astronomer"  {Exp.  Supp.  pp.  10-11). 
For  stellar  data,  this  resulted  in  mean  places  for  stars  brighter  than  4.75  (1078)  to 
an  accuracy  of  0U  in  right  ascension  and  1"  in  declination.  Visual  magnitudes  and 
spectral  types  were  also  given,  though  they  were  not  up-to-date. 

With  the  1981  edition,  the  unification  of  the  almanacs  was  completed  by  the 
adoption  of  a  single  printing  with  one  title — The  Astronomical  Almanac.  This  edi- 
tion was  a  complete  revision  in  content  as  well  as  format.  To  make  the  almanac 
more  responsive  to  modern  astronomical  research,  the  scope  of  this  new  revision 
was  enlarged  to  include  an  improved  and  expanded  stellar  data  section. 

The  general  precepts  for  establishing  the  contents  of  the  section  were  as  follows. 
Since  The  Astronomical  Almanac  was  placed  handily  near  most  telescopes,  finding 
lists  for  the  most  frequently  observed  objects  was  considered  most  useful.  These 
stellar  or  nonstellar  objects  could  be  the  subjects  of  investigations  or  they  might  be 
used  for  calibrational  purposes.  Categories  for  these  objects  were  identified  (some 
fell  in  several  categories)  and  the  data  most  pertinent  to  the  observations  were 
listed. 

Since  the  names  of  the  astronomical  objects  researched  were  quoted  in  the  lit- 
erature, studies  with  the  Bibliography  of  Astronomical  Objects  of  SIMBAD  (e.g., 
Ochsenbein  and  Dubois  1986)  were  indispensable  in  determining  the  most  fre- 
quently quoted  names.  Ochsenbein  and  Dubois  have  shown  that  the  most  popular 
objects  now  are  nonstellar,  and  include  galaxies,  QSOs,  globular  clusters,  X-ray 
sources,  and  pulsars.  Calibrational  objects  were  not  as  readily  identified  since  they 
were  not  usually  cited.  However,  calibrational  systems  were  always  mentioned,  and 
studies  such  as  that  of  Mermilliod  (1984)  were  useful  in  determining  which  systems 
were  most  frequently  used.  Ideally,  lists  recommended  by  the  IAU,  such  as  the  list  of 
radial  velocity  standards  (IAU  Trans.  1957)  were  the  most  desirable.  Unfortunately, 
that  was  the  only  such  list,  and  it  was  hopelessly  out-of-date. 

Once  a  selection  of  tables  (lists)  was  made,  internationally  recognized  experts 
were  contacted  to  help  make  the  selection  of  the  objects  and  data  to  be  listed.  These 
experts,  in  general,  had  themselves  published  catalogs  or  compiled  unpublished 
data  files  of  astronomical  objects.  Selections  from  these  catalogs  (files)  were  then 
proposed  for  publication  in  The  Astronomical  Almanac.  At  present,  the  almanac 


10  /  STARS  AND  STELLAR  SYSTEMS 


511 


offers  fourteen  lists  in  13  tables.  A  mixture  of  frequently  observed  objects  as  well  as 
commonly  used  calibrational  systems  is  included.  Even  in  those  lists  not  specifically 
defining  a  calibrational  system,  much  of  the  data  can  be  used  for  calibrational 
purposes.  Titles  and  short  descriptions  of  these  tables  are: 

Bright  Stars:  1482  bright  stars,  listing  positional  (FK5,  SAO),  photometric 

(UBV  horn  Nicolet,  1978)  and  spectroscopic  data  (from  W.P.  Bidelman, 

1991).  Also  notes  on  duplicity,  variability,  and  reliability  of  data  (from  Yale 

Bright  Star  Catalog,  4th  ed.,  Hoffleit  and  Jaschek,  1982). 
Bright  MK  Atlas  Standards:  Included  in  the  Bright  Stars  list.  Recent  MK  Atlas 

Standards,  which  are  included  in  the  Yale  Bright  Star  Catalog. 
UBVRI  Standards:  107  bright  standards  selected  by  H.L.  Johnson. 
Stroragren  four-color  and  H-heta  standards:  319  bright  standards  selected  from 

list  of  Perry  et  ah  (1987) 
Radial- Velocity  Standards:  Bright  and  faint  IAU  lists  (IAU  Trans.  1957,  IAU 

Trans.  1973).  Under  revision. 
Selected  Variable  Stars:  181  bright  variables  of  different  types,  selected  by  J. A. 

Mattel  from  the  fourth  edition  of  the  General  Catalog  of  Variable  Stars; 

Sky  Catalog  2000.0,  Volume  2;  and  data  files  of  the  American  Association 

of  Variable  Stars  Observers. 
Selected  Open  Clusters:  288  open  clusters  selected  by  G.  Lynga  (1988)  from  his 

computer-based  Lund  Catalog  of  Open  Cluster  Data. 
Globular  Clusters:  Data  on  157  galactic  globular  clusters  compiled  by  R.E. 

White. 

Bright  Galaxies:  194  of  the  brightest  and  largest  galaxies,  selected  by  G.  de 

Vaucouleurs  from  the  Second  Reference  Catalogue  of  Bright  Galaxies  (1976). 
Radio  Source  Positions:  233  radio  sources  suitable  for  positional  calibration; 

list  of  Argue  et  al.  (1984). 
Radio  Flux  Calibrators:  14  radio  sources  suitable  for  flux  calibration,  from  Baars 

et  al.  (1977),  as  updated  by  the  authors. 
Selected  Identified  X-ray  Sources:  194  identified  X-ray  sources,  selected  by  J.F. 

Dolan  from  his  unpublished  survey  file. 
Selected  Quasars:  99  QSOs  selected  by  T.M.  Heckman  from  A  Catalog  of  Quasars 

and  Active  Nuclei  (Veron-Cetty  and  Veron,  1985). 
Selected  Pulsars:  92  Pulsars  selected  by  J.H.  Taylor  from  the  compilation  of 

Manchester  and  Taylor  (1981). 

More  information  on  these  astronomical  objects  and  tables,  with  references 
to  additional  data,  are  given  in  the  sections  that  follow.  Although  these  tables 
include  about  90%  of  the  100  most  frequently  quoted  objects  in  the  literature, 
there  are  some  noticeable  gaps,  including  a  table  of  nebulae  and  a  list  of  infrared 
objects.  It  has  also  been  suggested  that  fainter  calibrational  objects,  such  as  fainter 
photometric  standards,  be  listed.  Fainter  calibrational  objects  will  be  included  in 
future  editions,  but  the  problem  of  finding  charts  has  not  yet  been  resolved.  The 


512  EXPLANATORY  SUPPLEMENT 

form  and  content  of  the  section  are  incomplete  and  experimental;  it  is  expected  to 
change  continually  to  reflect  the  changing  needs  of  astronomical  research. 


10.21    Bright  Stars 

Tables  of  bright  stars  have  been  published  in  the  national  almanacs  from  their 
inceptions.  This  affirms  the  continuing  usefulness  of  bright-star  data.  The  positions 
of  the  stars  are  the  most  important  data  to  users.  These  data  are  used  in  navigation 
and  topographical  surveying  and  by  observational  astronomers  for  the  positional 
calibration  of  telescopes  and  instruments. 

At  present  the  Yale  Bright  Star  Catalog  (Hoffleit  and  Jaschek,  1982)  is  the 
most  comprehensive  hardcopy  collection  of  data  for  stars  brighter  than  6.5  visual. 
It  contains  astrometric,  photometric,  and  spectroscopic  data  as  well  as  duplicity 
and  variability  information  for  the  9110  stars  of  the  Harvard  Revised  Photometry. 
The  Sky  Catalogue  2000.0,  Volume  1  (Hirshfeld  and  Sinnott,  1982),  is  less  com- 
prehensive than  the  YBSC,  but  contains  information  on  45,269  stars  brighter  than 
8.05.  Neither  tome,  however,  can  compare  with  the  computer-based  astronomical 
data  bank  of  the  Centre  de  Donnees  Stellaires  at  Strasbourg  Observatory  called 
SIMBAD  (Set  of  Identification,  Measurements,  and  Bibliography  for  Astronomical 
Data).  This  data  bank  gives,  for  each  of  600,000  stars,  an  exhaustive  array  of  data 
as  well  as  citations  for  each  star  in  bibliographical  references  to  papers  in  90  ma- 
jor astronomical  journals  since  1950  (Egret  and  Wegner,  1988;  Wegner,  Egret,  and 
Ochsenbein,  1989). 

When  work  began  on  the  Bright  Stars  list  in  the  late  1970s,  only  the  third 
edition  of  the  YBSC  was  available,  and  most  of  its  data  had  been  superseded.  For- 
tunately, some  of  the  more  important  new  data  were  already  available  in  computer- 
readable  form.  A  selection  of  less  than  1500  stars  (30  pages)  was  made  from  the 
third  edition:  all  stars  brighter  that  4.5  visual  were  included.  In  addition,  FK4  stars 
brighter  that  5.5  visual  were  included  to  insure  that  the  positions  of  fainter  stars 
were  precise  to  1  arcsecond.  Finally,  a  short  list  of  bright  MK  spectroscopic  stan- 
dards were  incorporated  in  the  list  to  avoid  unnecessary  duplication.  These  were 
YBSC  stars  that  were  in  the  atlas  by  Morgan,  Abt,  and  Tapscott  (1978),  and  the 
atlas  of  Keenan  and  McNeil  (1976). 

Following  the  IAU-recommended  practice  of  giving  two  identifications  for  each 
object,  the  Bayer/Flamsteed  designations  were  selected  because  of  their  wide-spread 
use,  and  the  BS  (HR)  number  to  facilitate  access  to  additional  data  given  in  the 
YBSC.  The  positions  of  the  stars  are  still  the  most  important  data  to  the  observer, 
and  for  most  applications,  a  precision  of  one  arcsecond  is  sufficient.  To  avoid  listing 
the  proper  motions,  yet  insure  the  stated  precision  for  the  whole  year,  the  positions 
are  brought  to  the  mean  equator  and  equinox  of  the  middle  of  the  current  year, 
with  proper  motions  applied.  Reduction  to  apparent  places  may  be  performed  using 
the  methods  given  in  Section  B.  Starting  positions  for  the  stars  were  taken  from 


10  /  STARS  AND  STELLAR  SYSTEMS 


513 


the  FK5,  GC,  or  SAO  catalogs— in  that  order  of  preference — and  all  positions  were 
reduced  to  the  FK5  system. 

Photometric  quantities  on  the  UBV  system  were  obtained  from  Nicolet  (1978) 
except  for  some  double  stars  for  which  Nicolet  lists  the  combined  magnitudes  and 
color  indexes.  In  these  cases,  the  magnitudes  and  color  indexes  were  taken  from  the 
third  edition  of  the  YBSC.  Spectral  types  on  the  MK  system  (if  available)  or  the  Mt. 
Wilson  system  have  been  kept  current  by  W.P.  Bidelman  (1991)  from  his  extensive 
card  catalog.  Last,  but  not  least,  the  notes  give  the  duplicity  and  variability  status 
of  each  star  as  well  as  indications  of  the  reliability  of  the  data.  It  is  in  these  notes 
that  the  YBSC  (fourth  edition)  has  been  most  useful. 

The  annual  publication  of  The  Astronomical  Almanac  presents  a  considerable 
opportunity  for  the  Bright  Stars  list  to  offer  the  observer  the  most  current  and 
relevant  data  for  the  brightest  stars. 

10.22   Variable  Stars 

The  information  in  the  list  of  variable  stars  has  been  compiled  using  the  references 
in  the  third  edition  of  the  General  Catalogue  of  Variable  Stars  and  its  three  sup- 
plements; the  Sky  Catalogue  2000.0,  Volume  2;  and  the  data  files  of  the  American 
Association  of  Variable  Star  Observers  (AAVSO).  Only  bright  stars  from  each  class 
of  variable  stars  that  also  fit  the  criterion  of  having  an  amplitude  of  variation  0.5 
magnitude  or  greater  have  been  selected.  The  limiting  magnitude  for  each  type  of 
star  selected  is  indicated  in  The  Astronomical  Almanac. 

Complete,  up-to-date  information  on  about  28,450  variable  stars  discovered 
and  named  by  1982,  and  on  the  constellations  Andromeda  through  Vulpecula  is 
given  in  the  fourth  edition  of  the  General  Catalog  of  Variable  Stars  (Kholopov 
et  ai,  1957-1987)  (GCVS),  published  in  three  volumes  from  1985  to  1987  by  the 
Astronomical  Council  of  the  USSR  Academy  of  Sciences  in  Moscow.  This  catalog 
contains  the  1950.0  position,  precession  constants,  galactic  coordinates,  reference 
and  finder  chart  information,  type,  range  of  variation,  epoch  for  the  elements  given, 
period,  and  spectrum  for  each  star.  Each  volume  also  contains  a  section  of  remarks 
on  stars  that  require  them.  Two  more  volumes  will  be  published  as  part  of  this 
edition,  and  will  contain  positional  information  for  the  equator  and  equinox  of 
1900.0  and  a  list  of  variable  stars  in  order  of  right  ascension. 

The  information  in  the  fourth  edition  of  the  GCVS  is  also  on  magnetic  tape, 
and  may  be  be  obtained  from  the  Astronomical  Data  Center  (Mail  Code  633,  NASA 
Goddard  Space  Flight  Center,  Greenbelt,  MD  20771,  U.S.A).  Bound  copies  of  the 
first  three  volumes  are  also  available  from  the  AAVSO,  25  Birch  Street,  Cambridge, 
MA  02138,  U.S.A. 

Stars  that  have  been  discovered  and  named  from  1982  to  1988  are  given  in  the 
67th,  68th,  and  69th  Name  Lists  of  Variable  Stars,  published  by  Commission  27  of 


514  EXPLANATORY  SUPPLEMENT 

the  IAU  as  Information  Bulletin  of  Variable  Stars  (Numbers  2681,  3058  and  3323, 
respectively). 

The  nomenclature  used  in  the  list  of  variable  stars  in  both  The  Astronomical 
Almanac  and  the  General  Catalog  of  Variable  Stars  is  the  conventional  method 
developed  by  F.W.A.  Argelander  in  the  mid-1800s.  According  to  this  method,  the 
first  star  discovered  in  a  constellation  is  given  the  letter  R,  followed  by  the  genitive 
form  of  the  Latin  name  of  the  constellation.  Subsequent  variables  in  the  same 
constellation  are  named  S,  T,  and  so  on  to  Z,  followed  by  RR  to  RZ;  then  SS  to  SZ, 
and  so  on  to  ZZ,  after  which  follow  AA  to  AZ,  and  so  on  to  QZ,  the  334th  variable 
in  a  constellation.  The  next  variable  found  in  a  constellation  is  named  V335  plus 
the  genitive.  Stars  which  have  been  assigned  Greek  letters  prior  to  the  start  of  this 
system,  such  as  Omicron  Ceti,  or  small  Roman  letters,  such  as  g  Herculis,  continue 
to  keep  those  names. 

Extensive  references  on  variable  stars  may  be  obtained  through  the  interna- 
tional database  SIMBAD  maintained  by  the  Strasbourg  Centre  de  Donnees  Stel- 
laires  (CDS)  (11,  rue  de  l'Universite,  F-67000  Strasbourg,  France). 

The  AAVSO  is  the  largest  organization  of  its  kind — compiling  observations 
on  variable  stars  from  observers  worldwide.  These  observations  are  digitized  and 
processed  and  kept  up-to-date.  Since  its  inception  is  1911,  the  AAVSO  has  the 
largest  database  of  visual  variable-star  observations,  including  data  on  about  3000 
variable  stars  having  an  amplitude  of  variation  1  magnitude  or  larger.  The  AAVSO 
also  has  a  database  of  photoelectric  observations  on  50  small-amplitude  (smaller 
than  one  magnitude)  red  variable  stars.  Copies  of  both  visual  and  photoelectric 
observations  may  be  obtained  from  the  AAVSO  on  request  by  writing  to  Dr.  Janet 
A.  Mattei,  Director,  AAVSO,  25  Birch  St.,  Cambridge,  MA  02138. 

Other  locations  that  act  as  repositories  of  photoelectric  observations,  together 
with  the  contact  person,  are: 

Dr.  C.  Jaschek 

Centre  de  Donnees  Stellaires 

Observatoire  de  Strasbourg 

11,  rue  de  l'Universite 

F-67000  Strasbourg 

France 

Mrs.  E.  Lake,  Librarian 
Royal  Astronomical  Society 
Burlington  House 
London,  WIV  ONL 
Great  Britain 


10  /  STARS  AND  STELLAR  SYSTEMS 


515 


Dr.  E.  Makarenko 

Odessa  Astronomical  Observatory 

Shevchenko  Park 

Odessa  270014 

USSR 

1 0.23   Double  and  Multiple  Stars 

The  structure  and  evolution  of  a  star  is  basically  dependent  on  two  parameters:  (1) 
the  initial  chemical  content,  and  (2)  the  initial  mass.  Double-star  systems  permit  the 
determination  of  the  latter  parameter,  hence  their  importance  in  astrophysics.  Their 
numbers  and  distribution  also  provide  insights  into  the  process  of  star  formation. 

Double  and  multiple  stars  form  an  important  fraction  of  the  stellar  population. 
The  term  double  star  includes  the  optical  pairs  formed  by  chance  juxtaposition  of 
unrelated  stars  as  well  as  the  true  binaries  that  are  physically  related.  For  many 
double  stars  there  is  not  enough  information  to  determine  whether  the  pair  is  phys- 
ical; therefore  catalogs  also  include  optical  doubles.  Historically,  double  stars  have 
also  been  differentiated  by  the  observational  means  used  to  discover  and  study 
them.  Thus,  there  are  not  only  visual  doubles,  but  also  spectroscopic,  astromet- 
ric,  photometric,  interferometric,  and  occupation  pairs.  With  the  development  of 
modern  observing  techniques,  however,  these  distinctions  are  likely  increasingly  to 
become  blurred. 

Multiple  systems,  containing  more  than  two  components,  generally  are  classed 
as  either  "hierarchical"  or  "nonhierarchical."  In  the  first  instance,  a  typical  triple 
will  contain  a  close  pair  and  a  third  component  located  at  a  distance  many  times 
the  separation  of  the  close  pair.  In  the  second  instance,  the  separations  of  all  the 
components  are  roughly  the  same.  Examples  of  these  classes  are  Epsilon  Hydrae 
(hierarchical)  and  the  Trapezium  (nonhierarchical). 

Nomenclature  for  double  stars  is  extremely  mixed.  Visual  pairs  are  usually 
designated  by  the  discoverer's  abbreviation  and  serial  number,  although  some  ob- 
servers have  neglected  to  number  all  or  a  portion  of  their  pairs.  Eclipsing  pairs 
are  designated  by  the  variable  star  nomenclature.  There  appears  to  be  no  standard 
nomenclature  whatsoever  for  spectroscopic,  astrometric,  or  occupation  binaries, 
which  are  given  a  multitude  of  designations  taken  from  various  catalogs. 

With  few  exceptions,  the  primary  (A  component)  of  a  visual  double  is  the 
brighter  star;  the  secondary  (B  component)  is  fainter.  There  are  systems  of  very 
small  magnitude  difference,  however,  where  this  distinction  is  arbitrary.  Additional 
components  in  a  multiple  system  are  designated  C,  D,  and  so  on,  in  order  of  mcreas- 
ing  separation.  It  sometimes  happens  that  a  new,  close,  companion  is  discovered  in 
an  already  defined  system.  The  convention  is  then  to  designate  it  as  Aa,  Bb,  Cc, 
etc. 


516  EXPLANATORY  SUPPLEMENT 

The  Washington  Double  Star  Catalog,  1984-0  (WDS)  was  issued  in  tape  form. 
It  is  the  replacement  for  the  Index  Catalog  of  Visual  Double  Stars,  1961.0,  issued 
by  the  Lick  Observatory,  and  commonly  called  the  IDS.  The  format  of  the  WDS 
is  nearly  identical  to  that  of  the  IDS;  both  are  cardimage.  The  WDS  tape  includes 
an  introduction,  the  list  of  known  double  stars  (numbering  73610),  notes,  and  ref- 
erences. The  data  file  is  being  kept  up-to-date,  and  a  new  tape  edition  should  be 
available  in  1992.  Currently,  the  WDS  is  ordered  by  .12000.0  coordinates,  and  cer- 
tain other  format  changes  have  been  made  to  modernize  the  data  base.  Users  can 
obtain  tape  copies  of  the  WDS  from  either  the  Astronomical  Data  Center  or  the 
Centre  de  Donnees  Stellaires  (addresses  for  these  are  given  in  Section  10.22). 

The  companion  catalog  to  the  WDS  is  the  Catalog  of  Observations.  This  catalog 
contains  the  differential  measures  of  each  pair.  At  the  present  time,  the  database 
contains  about  426,000  measures  (means).  It  is  complete  for  published  observations 
since  1927,  and  largely  so  for  those  of  earlier  date,  which  continue  to  be  incor- 
porated. This  database  is  in  a  continual  state  of  change,  and  consequently  it  is 
not  (and  never  has  been)  intended  to  be  distributed  as  an  entity.  However,  an  at- 
tempt is  made  to  provide  requestors  with  data  on  individual  objects,  provided  that, 
"reasonable"  amounts  of  data  are  requested. 

Eclipsing  binaries  are  listed  by  Wood  et  al.  (1980).  Their  list  contains  informa- 
tion on  more  than  3500  systems,  and  includes  a  small  number  of  objects  that,  while 
interacting  and  producing  light  variations,  are  not  strictly  eclipsing  systems.  The 
magnitude  limit  is  15  at  minimum  light.  The  left-hand  page  for  each  entry  contains 
identifications  and  approximate  coordinates,  maximum  magnitude,  depth  of  pri- 
mary and  secondary  minima,  spectral  types  of  each  component,  epoch  of  primary 
eclipse,  and  period.  The  right-hand  page  contains  brief  notes  and  references. 

Spectroscopic  binaries  with  orbits  are  listed  by  Batten  et  al.  (1989).  For  the 
1469  systems  included,  the  authors  list  on  the  left-hand  page  the  identification  and 
position,  magnitude,  spectral  type,  and  reference.  The  right-hand  page  lists  the 
spectroscopic  elements  and  a  quality  rating  for  each  solution.  Following  the  entries 
are  very  extensive  notes  and  references  concerning  individual  systems.  A  somewhat 
parallel  effort  by  Pedoussaut  et  al.  (1988)  has  resulted  in  many  supplementary 
catalogs,  which  are  valuable  for  their  attempt  to  list  all  bibliographical  references 
to  each  object.  Unfortunately,  there  is  no  modern  catalog  for  known  or  suspected 
spectroscopic  binaries  that  have  no  calculated  orbit. 

10.24   Photometric  Standards 

Tables  of  photometric  standard  stars  are  listed  with  their  coordinates  and  with  their 
photometric  standard  values  taken  from  the  cited  literature.  Photometric  standard 
stars  are  widely  used  by  observers  because  it  is  difficult  to  establish  absolute  cali- 
brations of  the  telescopes  and  detectors  used  for  stellar  photometry  and  to  account 


10  /  STARS  AND  STELLAR  SYSTEMS 


517 


for  atmospheric  absorption.  Standard  values  refer  to  intensities  outside  the  atmo- 
sphere. They  are  defined  and  listed  using  the  magnitude  system  traditionally  used 
by  astronomers.  The  magnitude  scale  is  logarithmic  and  is  defined  as  (-2.  5  log 

Intensity).  . 

Many  different  photometric  systems  exist.  They  are  defined  using  filters  and 
detectors  that  give  different  passbands.  The  first  system,  presently  included  in  The 
Astronomical  Almanac  is  the  system  most  widely  used  by  astronomers.  The  UBV 
system,  introduced  by  Johnson  and  Morgan  (1953),  was  the  first  to  be  used  ex- 
tensively. It  has  broad  passbands  (700-1000  A  wide)  with  effective  wavelengths  of 
3650  A,  4400  A,  and  5500  A  for  U,  B,  and  V,  respectively.  It  is  described  by  Johnson 
(1963).'  Later,  R  and  /  filters  were  added  to  the  system  by  Johnson  with  effective 
wavelengths  of  7000  A  and  9000  A.  However,  several  variations  on  RI  systems  have 
been  developed  and  used  by  others.  The  RI  systems  most  widely  used  are  those  of 
Johnson,  of  Kron  et  al.  (1957)  and  of  Cousins  (1976).  The  list  of  bright  UBVRI 
standards  published  in  The  Astronomical  Almanac  was  selected  by  H.L.  Johnson 
from  the  list  of  Johnson  et  al.  (1966).  An  extensive  list  of  faint  UB  V standards  was 
published  by  Landolt  (1973).  Landolt's  standards  were  located  in  the  equatorial  Se- 
lected Areas,  convenient  to  astronomers  worldwide.  A  decade  later,  Landolt  (1983) 
published  a  list  of  223  faint  UBVRI  standards.  These  stars  were  also  located  in  the 
same  equatorial  Selected  Areas  and  included  many  of  the  stars  in  the  first  list.  The 
t/BVdata  were  calibrated  by  the  earlier  list  while  the  RI  data  were  tied  to  the  RI 
standards  of  Cousins  (1976).  r 

The  second  system  presently  included  in  The  Astronomical  Almanac  is  the 
widely  used  system  of  four-color  and  H-beta  photometry  established  by  Stromgren 
(1963)  and  others.  The  passbands  are  of  intermediate  width  (180-300  A)  centered 
at  3500  A,  4110  A,  4670  A,  and  5470  A  for  «,  v,  b,  and  y,  respectively,  with  a  pan  oi 
passbands  at  4680  A  to  measure  the  hydrogen  Balmer  line.  In  the  1981  through  the 

1990  editions  of  The  Astronomical  Almanac,  the  complete  list  of  Stromgren  four- 
color  standards,  included  in  the  Crawford  and  Barnes  (1970)  list,  was  published 
along  with  beta  indexes  from  Crawford  and  Mander  (1966).  Beginning  with  the 

1991  edition,  the  new  list  of  Perry,  Olsen,  and  Crawford  (1987)  was  used.  Al  319 
four-color  standards  are  listed  along  with  their  beta  indexes.  The  new  list  contains 
several  fainter  stars  (V  =  6-7  mag.)  as  well  providing  more  accurate  data. 

The  tables  in  The  Astronomical  Almanac  are  provided  for  convenience,  but 
observers  should  keep  in  mind  that  the  tables  may  not  always  provide  a  complete 
list  of  standards.  One  requirement  for  a  well-defined  photometric  system  is  that  it 
have  a  high  degree  of  internal  consistency.  The  tables  included  in  The  Astronomzcal 
Almanac  are  chosen  from  sources  with  an  effort  to  provide  consistent  data  Ut 
course,  no  set  of  data  is  perfect,  and  a  sample  of  stars  selected  from  a  larger  set  ot 
standards  cannot  completely  define  the  standard  system.  Furthermore  observers 
should  keep  in  mind  the  differences  between  variants  of  a  system,  such  as  the  several 
RI  systems  mentioned  previously,  and  should  seek  to  match  their  own  passbands  as 


518  EXPLANATORY  SUPPLEMENT 

closely  as  possible  to  the  system  passbands.  Data  taken  in  one  system  can  sometimes 
be  transformed  to  another  system  as  described  by  Bessell  (1986),  Bessell  and  Weis 
(1987),  and  Taylor  (1986)  for  example.  However,  no  general  transformation  exists 
that  can  be  applied  to  a  wide  range  of  stellar  types  and  that  is  satisfactory  at  the 
1%  level  of  precision  that  is  desirable  for  many  purposes. 

As  large  telescopes  with  more  sensitive  detectors  come  into  common  use,  fainter 
stars  are  being  established  as  secondary  standards  in  many  photometric  systems. 
The  needs  of  astronomers  and  the  capabilities  of  their  instruments  will  continue  to 
require  changes  in  the  stars  used  as  standards. 


10.25   Radial-Velocity  Standards 

The  list  of  radial-velocity  standard  stars  given  in  The  Astronomical  Almanac  and 
their  standard  velocities  are  a  subset  of  those  adopted  by  IAU  Commission  30 
(Trans.  IAU,  IX,  442,  1957;  Trans.  IAU,  XVA,  409,  1973).  Stars  that  have  since 
been  proved  to  be  definite  velocity  variables  have  been  deleted,  and  a  few  velocities 
that  are  now  known  to  differ  from  their  IAU  value  by  more  than  lkms"1  have 
been  marked.  Candidates  for  future  adoption  as  primary  standard  stars  (see  below) 
are  also  identified.  V  magnitudes  are  from  Nicolet  (1978)  when  possible;  otherwise, 
they  are  estimated  from  photographic  magnitudes  and  spectral  types.  The  latter 
are  from  the  Bright  Stars  list  (pp.  H2-H31),  the  Yale  Bright  Star  Catalog,  or  the 
original  IAU  list,  in  order  of  preference.  Positions  are  obtained  by  the  procedures 
used  for  the  Bright  Stars  list. 

Some  discrimination  is  necessary  in  the  use  of  these  standard  stars,  for  the 
following  reasons. 

Radial-velocity  standards  serve  two  basic  purposes:  (1)  as  constant-velocity 
st  ars  with  which  to  monitor  instrument  long-term  stability,  and  (2)  as  stars  of  known 
radial  velocity  with  which  to  test  instrument  zero-points.  Over  the  last  decade  or 
so,  the  precision  and  efficiency  of  radiahvelocity  measurements  have  improved  by 
factors  of  10  to  100  or  more.  A  dramatic  increase  in  research  based  on  radial- velocity 
data  has  followed,  much  of  the  stellar  work  relying  on  high-precision  radial  velocities 
(e.g.,  cluster  dynamics,  stellar  pulsations,  or  low-mass  companions). 

It  was  realized  some  time  ago  that  the  old  IAU  standard  system  was  inad- 
equate to  meet  these  increased  demands  (Batten  1985).  Therefore,  in  1985,  IAU 
Commission  30  created  a  Working  Group  whose  goal  was  proposing  a  new  and 
better  system,  in  which  the  zero-point  and  individual  velocities  would  be  known  to 
approximately  +  100  ms-1.  The  plans  for  the  new  system,  and  the  results  obtained 
during  1985-1988,  are  described  in  the  reports  of  IAU  Commission  30  (IAU  Trans. 
1988  and  IAU  Trans.  1990).  Unfortunately,  no  new  system  has  yet  been  adopted. 
The  reasons  for  this  are  relevant  to  the  use  of  the  present  standard  stars,  and  are 
described  in  the  paragraphs  that  follow. 


10  /  STARS  AND  STELLAR  SYSTEMS  519 

During  1985-1988,  radial-velocity  variations  of  tens  to  hundreds  of  ms-1  and 
with  periods  ranging  from  days  to  years,  have  been  shown  to  occur  in  solar  and 
later-type  stars,  both  dwarfs  (Campbell  et  al.,  1988)  and  giants  (Irwin  et  al.,  1989). 
However,  few  stars  have  been  thoroughly  examined  at  this  level  of  precision.  More- 
over, since  the  low-amplitude  variations  may  have  very  long  periods,  the  constancy 
of  a  given  star  to,  say,  ±  100  ms-1  cannot  be  established  quickly.  Finally,  detailed 
comparisons  have  revealed  subtle  systematic  differences  between  the  main  instru- 
ments now  in  use.  These  must  be  understood  before  definitive  velocities  for  indi- 
vidual stars  can  be  adopted. 

The  longest  possible  history  of  precise  observations  was  the  main  factor  in  se- 
lecting candidates  for  a  new  standard  system.  Hence,  potential  new  standards  were 
chosen  from  existing  standards  within  ±  20°  of  the  equator,  making  them  observable 
from  both  hemispheres,  which  eliminates  proven  variables.  The  candidates  are  indi- 
cated in  the  list  given  in  The  Astronomical  Almanac.  Further  observations  of  these 
stars  are  being  made,  and  are  strongly  encouraged,  to  identify  those  that  are  suffi- 
ciently constant  for  later  adoption  as  primary  standards,  and  to  define  individual 
mean  radial  velocities  for  them. 

To  avoid  a  proliferation  of  different  velocity  systems,  the  old  IAU  system  will 
remain  in  force  until  the  new  system  can  be  adopted,  even  though  the  velocities  of 
some  stars  are  known  to  differ  from  the  IAU  standard  values  listed.  Observations 
of  minor  planets  have  shown  that  the  mean  zero-point  of  the  old  system  is  correct 
to  within  approximately  ±  300  ms-1.  Therefore,  observations  of  several  primary 
standard  candidates  should  yield  a  fairly  good  mean  value;  reliance  on  one  or  two 
stars  only  is  discouraged. 

Finally,  since  radial-velocity  observations  of  early-type  stars  are  inherently  less 
precise  than  of  solar  and  later-type  stars,  and  because  accurate,  independent  veloc- 
ity checks  are  not  readily  available,  satisfactory  early-type  radial- velocity  standards 
do  not  exist.  Efforts  to  establish  such  standards  are  under  way,  but  will  take  years 
to  complete.  The  present  list  is  not  suitable  for  checking  the  zero-point  of  radial- 
velocity  data  for  early-type  stars. 

10.26   Spectral  Classification 

A  few  words  regarding  spectral  classification  may  be  helpful  to  users  of  the  Bright 
Stars  list.  A  star's  spectral  type  is  an  alphanumeric  notation  that,  when  appro- 
priately calibrated,  can  give  quite  reliable  information  on  the  absolute  magnitude, 
surface  temperature,  and  chemical  composition  of  the  outer  layers  of  a  star.  This 
notation  generally  involves  a  "spectral  class"  ranging  from  O  through  M  in  or- 
der of  decreasing  surface  temperature,  and  a  "luminosity  class"  ranging  from  la 
through  Vb  in  order  of  decreasing  intrinsic  brightness.  A  few  exceptionally  bright 
supergiants  are  assigned  luminosity  class  zero.  Further,  if  a  star's  spectrum  appears 
to  show  a  significant  deviation  in  chemical  composition  from  that  of  the  Sun,  an 


520  EXPLANATORY  SUPPLEMENT 

indication  of  this  abnormality  is  added.  For  the  peculiar  A  stars,  this  involves  spec- 
ifying the  elements  seen  in  abnormal  strength  (Si,  Mn,  Eu,  etc.).  The  stars  with  an 
abnormal  heavy-elements/hydrogen  ratio  are  often  indicated  by  use  of  an  element 
abbreviation  (Fe,  Ca,  etc.)  followed  by  a  positive  or  negative  number  denoting  the 
degree  of  enhancement  or  weakness  of  the  line  of  that  element  as  seen  in  the  spec- 
trum. Stars  of  markedly  unusual  composition,  such  as  the  carbon  stars  (C)  and  the 
very-heavy-element  stars  (S),  as  well  as  the  Wolf-Rayet  and  white-dwarf  stars,  all 
have  their  own  schemes  of  classification. 

Spectral  classification  notation  can  be  a  bit  confusing — "n"  or  "s"  indicates 
broad  (rotation)  or  sharp  lines  respectively,  and  "e"  indicates  hydrogen  emission. 
A  "+"  or  "-"  following  the  spectral  class  indicates  that  a  star  is  very  slightly  later 
(cooler)  or  earlier  (hotter)  than  the  class  given,  while  a  "+"  or  "— "  following  the 
luminosity  class  indicates  that  the  star  is  very  slightly  brighter  or  fainter  than  the 
class  assigned.  An  "m"  indicates  that  the  object  is  a  metallic-line  star,  and  a  "e," 
"g,"  or  "d"  before  the  spectral  class  indicates  that  the  object  is  a  supergiant,  giant, 
or  dwarf  but  has  no  actual  MK  classification. 

The  Morgan-Keenan  system  (MK)  is  defined  by  standard  stars,  of  universally 
accepted  spectral  type.  Classifiers  attempt  to  locate  their  unknowns  within  the  mul- 
tidimensional array  defined  by  these  standard  stars.  Unfortunately  the  results — at 
least  as  exemplified  in  the  preceding  data — is  not  entirely  satisfactory,  for  several 
reasons.  In  the  first  place,  the  types  assigned  to  most  of  the  standard  stars  have 
undergone  considerable  change  during  the  past  half-century,  so  that  a  given  investi- 
gator's determinations  may  be  a  function  of  time.  Second,  the  instrumentation  used 
by  the  various  spectral-type  practitioners  has  varied  considerably,  with  naturally 
a  very  large  attendant  variation  in  the  accuracy  of  the  classification  attempted, 
if  not  actually  realized.  For  example,  most  of  the  types  listed  are  from  rather  in- 
homogenous  slit  spectra,  but  some  are  from  moderate-dispersion  objective-prism 
plates.  Many  of  the  types  were  determined  long  ago;  others  are  very  new.  They  are 
certainly  in  no  sense  homogeneous. 

In  view  of  these  situations,  the  best  one  can  now  do  is  to  list  what  appear  to  be 
the  best  current  spectral  types.  Even  the  present  list  will  be  somewhat  out-of-date 
when  it  appears. 

The  calibration  of  Morgan-Keenan  spectral  types  in  terms  of  absolute  magni- 
tude, intrinsic  color,  and  surface  temperature  has  also  been  subject  to  considerable 
change  over  time.  The  most  useful  recent  reference  is  undoubtedly  the  extensive 
work  of  Schmidt-Kaler  (1982).  Calibration  of  the  third  (abundance)  parameter  of 
the  system  is  currently  in  a  primitive  state,  partly  because  there  is  not  yet  complete 
agreement  among  the  specialists  in  the  field  as  to  details  of  technique  and  notation. 

It  should  be  clear  that  even  an  accurate  spectral  type  is  no  substitute  for  a 
completely  reliable  spectral  analysis  and  absolute-magnitude  determination.  But  in 
the  stellar  astronomers'  real- world,  spectral  types  have  proved,  and  still  are  proving, 
extremely  useful  in  enabling  us  to  obtain  quickly  a  good,  albeit  necessarily  rough, 


10  /  STABS  AND  STELLAR  SYSTEMS  521 

idea  of  the  nature  of  a  star,  allowing  us  to  group  objects  of  similar  properties 
together  for  statistical  treatment;  and  providing  important  and  interesting  objects 
for  astrophysical  study. 

The  road  from  Secchi  to  Morgan  and  Keenan  and  beyond  has  been  long  and 
winding,  and  its  end  is  still  now  only  faintly  glimpsed. 

Those  who  wish  to  learn  more  about  the  development  and  future  trends  of 
spectral  classification  should  find  the  following  references  useful: 

R.H.  Curtiss  (1932) 

W.W.  Morgan,  P.C.  Keenan,  and  E.  Kellman  (1943) 

P.C.  Keenan  and  W.W.  Morgan  (1951) 

W.P.  Bidelman  (1969) 

W.W.  Morgan  and  P.C.  Keenan  (1973) 

P.C.  Keenan  and  R.C.  McNeil  (1976) 

W.W.  Morgan,  H.A.  Abt,  and  J.W.  Tapscott  (1978) 

M.F.  McCarthy,  A.G.D.  Philip,  and  G.V.  Coyne  (1979) 

T.  Schmidt-Kaler  (1982) 

R.F.  Garrison  (1984) 

R.O.  Gray  (1989) 

10.27  Pulsars 

Pulsars  are  selected  for  The  Astronomical  Almanac  list  if  their  mean  400  MHz  flux 
density  is  greater  than  40  rnJy.  Another  handful  are  included  that  are  particularly 
interesting — for  example,  millisecond  pulsars  or  members  of  binary  systems.  Most 
of  the  data  are  taken  from  a  compilation  by  Manchester  and  Taylor  (1981),  which 
contains  references  to  the  original  literature.  Some  recent  updates  and  additions 
are  from  a  new  compilation  now  being  readied  for  publication  (Lyne,  Manchester, 
and  Taylor). 

Pulsars  are  conventionally  designated  by  their  positions  in  the  equatorial  coor- 
dinate system,  equinox  and  equator  of  1950.0,  given  as  right  ascension  in  hours  and 
minutes  and  declination  in  degrees  (or,  in  case  of  ambiguity,  degrees  and  tenths). 
In  most  cases,  the  positions  are  measured  by  means  of  pulse-timing  observations. 
Arrival  times  measured  on  a  number  of  dates,  spread  over  many  months  or  longer, 
can  provide  astrometric  accuracies  well  under  a  second  of  arc  for  "normal"  pulsars, 
and  at,  or  below,  the  milli-arcsec  range  for  millisecond  pulsars  (Rawley,  Taylor, 
and  Davis  1988).  The  same  observations  yield  high-precision  values  for  the  pulsar 
periods,  P,  and  period  derivatives  or  spin-down  rates,  P. 

The  group  velocity  for  meter-wavelength  signals  traveling  through  the  interstel- 
lar medium  is  less  than  c  (the  speed  of  light  in  vacuum),  because  of  the  presence  of 
an  ionized  gas  component.  The  velocity  is  also  frequency  dependent,  according  to 
the  relation 

v  =  c(l  -v2plv2)m,  (10.27-1) 


522  EXPLANATORY  SUPPLEMENT 

where  vp  is  the  plasma  frequency  and  v  is  the  frequency  of  the  wave  (see,  for  ex- 
ample, Manchester  and  Taylor,  1977,  Chapter  7).  For  a  given  pulsar  this  effect  is 
directly  measurable  from  timing  observations  at  separated  frequencies.  It  is  quan- 
tified in  a  constant  called  the  dispersion  measure,  which  amounts  to  the  integral  of 
free  electron  density  along  the  line  of  sight.  The  conventional  units  are  cm-3  pc. 

Irregularities  in  the  interstellar  medium,  together  with  the  extremely  small 
effective  angular  diameters  of  pulsars,  cause  another  propagation  effect  not  generally 
seen  in  radio  observations  of  other  types  of  sources.  Interstellar  scintillation,  the 
result  of  multi-path  propagation  through  an  irregular  medium,  can  cause  larger 
(order-of-magnitude)  variations  in  apparent  flux  density  as  a  function  of  both  time 
and  frequency.  Consequently,  flux  density  measurements  made  over  a  short  time 
and  a  narrow  frequency  range  may  differ  substantially  from  the  true  mean  flux 
density.  For  this  reason,  most  tabulated  pulsar  flux  densities  are  subject  to  rather 
large  uncertainties,  typically  a  factor  of  2  or  so. 


1 0.3    CLUSTERS  AND  GALAXIES 
10.31    Open  Cluster  Data 

The  data  selection  contained  in  the  table  "Selected  Open  Clusters"  is  a  subset  of  G. 
Lynga's  Lund  Catalog  of  Open  Cluster  Data  (fifth  edition,  1988).  This  computer- 
based  catalog  is  available  from  the  World  Data  Center  A  or  from  Centre  de  Donnees 
Stellaires.  The  fifth  edition  of  the  Lund  catalog  represents  a  new  approach  to  the 
presentation  of  available  data.  When  several  data  values  have  been  published  in  the 
literature,  the  catalog  contains  weighted  averages  of  these.  The  weights  are  derived 
objectively  using  methods  devised  by  Janes,  Tilley,  and  Lynga,  (1988).  The  data 
collection  for  this  work  ended  in  September  1986. 

The  Lund  catalog  contains  some  20,000  data  values  for  a  total  of  1100  entries. 
A  separate  file  includes  more  than  500  references  to  authors  and  titles  of  primary 
sources.  The  Astronomical  Almanac  table  contains  a  selection  from  the  Lund  catalog 
of  relevant  data  values  for  the  best  studied  clusters. 

10.311  Definition  of  Open  Clusters  The  clumping  of  stars  in  space  is  a  physical 
reality.  Probably  more  than  50%  of  all  stars  are  considered  double  or  multiple  stars. 
Groups  of  ten  or  more  stars  are  associations  or  clusters.  Because  the  stars  in  each 
such  group  share  origin  and  conditions,  they  are  of  great  use  in  the  study  of  stellar 
properties  and  in  the  study  of  properties  of  the  larger  systems  of  which  they  form 
parts. 

Associations  are  stellar  groups  that  are  less  than  1  million  years  old.  These 
groups  are  often  dynamically  unbound  systems  that  disperse  into  single  stars,  dou- 
ble stars,  and  small  groups.  Occasionally,  however,  the  associations  are  dynamically 


10  /  STARS  AND  STELLAR  SYSTEMS  523 

bound,  in  which  case  they  survive  to  become  open  clusters  (the  ages  of  which  range 
from  less  than  1  million  years  to  more  than  1  billion  years).  Open  clusters  are  quite 
distinct  from  globular  clusters,  which  are  always  dynamically  bound  and  are  several 
billion  years  old.  Open  clusters  form  a  flat  disk  subsystem,  whereas  the  globular 
clusters  form  an  extended  spheroid  subsystem. 

In  the  table  of  selected  open  clusters,  there  are  a  number  of  associations  that 
might  not  develop  into  physically  bound  clusters.  The  Trapezium  cluster  and  some 
of  the  Collinder  objects  belong  to  this  category.  Others,  such  as  the  Blanco  and 
Upgren  clusters,  are  considered  physical  entities  because  their  members  have  similar 
motions  and  physical  properties,  although  they  are  only  a  small  part  of  the  total 
stellar  population  inside  the  volume  they  occupy.  An  effort  has  been  made  to  exclude 
from  the  catalog  such  specious  clusters  that  are  in  fact  only  the  apparent  result  of 
the  distribution  of  obscuring  clouds. 

10.312  Open  Clusters  as  Related  to  Galactic  Structure  The  system  of  open  clus- 
ters provides  the  best  material  for  the  study  of  the  disk  of  our  Galaxy.  There 
are  several  reasons  for  this.  Distances,  ages,  and  interstellar  extinctions  are  better 
known  for  open  clusters  than  for  other  objects;  open  clusters  have  a  range  of  ages 
that  make  them  particularly  suited  for  study  of  the  recent  evolution  of  the  galac- 
tic system;  and  younger  clusters  congregate  in  spiral  features.  In  fact,  photometric 
studies  of  open  clusters  are  often  carried  out  in  the  course  of  investigations  of  galac- 
tic structure,  and  this  also  shows  in  the  selection  of  objects.  Thus,  a  lot  of  work  has 
been  carried  out  on  younger  clusters  and  on  very  old  open  clusters,  even  though 
some  quite  close-by  open  clusters  of  intermediate  age  are  still  relatively  unknown. 

10.3 13  Open  Clusters  as  Related  to  Studies  of  Stellar  Evolution  Many  of  the  break- 
throughs in  the  study  of  stellar  evolution  have  been  aided  by  observations  of  open 
clusters.  The  important  point  is  that  the  cluster  members  are  all  of  approximately 
the  same  age  and  chemical  composition.  The  only  fundamental  difference  is  in  the 
mass  of  gas  from  which  each  member  is  formed.  The  fact  that  more  massive  stars 
get  higher  central  temperature,  higher  luminosity,  and  a  faster  rate  of  evolution 
than  less-massive  stars,  has  been  utilized  for  most  of  the  fundamental  studies  of 
the  principles  of  stellar  evolution.  Practical,  observational  advantages  also  result 
from  the  fact  that  the  cluster  stars  can  be  assumed  to  have  the  same  distance  from 
us  and,  usually,  show  the  same  interstellar  extinction. 

10.314  Descriptional  Data  for  Open  Clusters  An  open  cluster  is  defined  by  its  po- 
sition in  the  sky  and  by  its  apparent  angular  diameter.  Each  cluster  has  also  tradi- 
tionally been  given  one  or  several  names  referring  to  various  catalogs  or  discoverers. 
In  fact,  for  some  objects  there  is  quite  a  profusion  of  different  denotations.  To  help 
alleviate  confusion,  the  cluster  commission  of  the  International  Astronomical  Union 
decided  in  1979  on  a  nomenclature  consisting  of  a  "C"  for  cluster,  four  digits  for 


524  EXPLANATORY  SUPPLEMENT 

hours  and  minutes  of  right  ascension  (1950.0)  and  a  plus  or  minus  sign  plus  three 
digits  for  degrees  and  tenths  of  degrees  of  declination  (1950.0).  In  the  Lund  open 
cluster  catalog,  the  IAU  designation  and  the  most  commonly  used  name  are  entered 
for  each  cluster.  The  current,  equatorial  position  is  also  entered. 

The  published  values  of  angular  diameters  of  clusters  sometimes  differ  by  a 
large  factor.  This  is  partly  due  to  different  limiting  magnitudes  for  different  studies 
but  also  to  different  opinions  about  the  extent  of  each  cluster.  It  is  important  for 
comparative  studies  to  have  a  consistent  value  for  the  diameter — in  the  fifth  edition 
of  the  Lund  catalog  this  was  accomplished  using  long  exposure  prints  and  films  from 
the  existing  series  of  Sky  Surveys.  The  angular  diameters  are  in  minutes  of  arc  and 
refer  to  the  cluster  cores. 

During  the  examination  of  the  Sky  Survey  Charts,  Trumpler  classes  were  also 
estimated.  The  classification  scheme  proposed  by  R.J.  Trumpler  (1930)  contains 
the  following  classes: 

Concentration  of  cluster  stars 

I  detached,  strong  central  concentration 

II  detached,  little  central  concentration 

III  detached,  no  noticeable  concentration 

IV  not  well  detached,  appearing  like  a  star-field  concentration 

Range  of  stellar  brightness 

1  most  stars  of  nearly  the  same  brightness 

2  medium  range  in  brightness 

3  bright  and  faint  stars  in  the  cluster 

Richness  of  cluster 
p  poor 

m     moderately  rich 
r  rich 

Nebulosity 

n      cluster  is  involved  in  nebulosity 

10.315  Derived  Data  for  Open  Clusters  Data  concerning  distances,  extinctions, 
and  physical  properties  of  open  clusters  are  determined  during  quite  extensive  in- 
vestigations. It  is  fortunate  that  so  much  work  is  devoted  to  such  tasks  all  over  the 
world.  The  work  of  the  data  compiler  is  to  compare  the  published  values,  to  analyze 
their  reliability,  and  to  find  the  best  available  figure  for  each  parameter. 

The  most  reliable  way  to  determine  the  distance  of  an  open  cluster  is  to  observe 
its  color-magnitude  diagram  and  fit  the  diagram  to  the  main  sequence  of  nearby 
stars.  When  a  cluster  includes  a  number  of  unevolved  stars  on  the  main  sequence, 
this  method  of  determining  distances  is  in  fact  superior  to  other  methods  used  for 


10  /  STARS  AND  STELLAR  SYSTEMS  525 

distant  stars  or  star  systems.  For  the  distance  of  a  nearby  cluster  with  a  long  main 
sequence,  an  imprecision  as  low  as  10%  can  be  achieved. 

In  connection  with  each  photometric  study,  a  determination  of  the  interstellar 
extinction  in  front  of  the  cluster  also  has  to  be  made.  The  usual  method  is  to  de- 
termine the  color  excess  due  to  the  extinction  and  assume  that  the  reddening  ratio 
between  the  extinction  in  visual  light  and  the  color  excess  is  3.1.  A  complication 
is  that  the  extinction  varies  over  the  cluster  in  some  cases.  Apart  from  those  clus- 
ters, and  if  the  assumption  about  reddening  ratio  is  correct,  the  extinction  can  be 
determined  to  within  about  0.1  magnitudes. 

Frequently,  the  same  investigations  that  determine  the  distances  to  clusters  will 
also  provide  estimates  of  their  ages  by  using  the  turn-off  point  of  the  main  sequence 
from  the  zero-age  main  sequence.  This  is  the  most  reliable  method,  and  results 
from  it  are  given  in  The  Astronomical  Almanac  table.  To  have  a  homogeneous  set 
of  cluster  ranges  Janes,  Tilley,  and  Lynga  derived  a  calibration  of  the  logarithm 
of  age  as  a  function  of  the  turn-off  color.  The  listed  values  around  6.0— i.e.,  one 
million  years  can,  in  most  cases,  be  considered  as  rough  upper  limits.  Clusters  of 
that  age  group  might  still  be  in  the  process  of  star  formation  and  thus  have  a  large 
spread  in  age  between  member  stars.  Clusters  with  logarithmic  ages  higher  than 
7.0  have  an  imprecision  of  a  few  tenths  of  unit. 

Data  for  the  magnitude  of  the  brightest  cluster  members  and  for  the  spectral 
class  of  the  earliest-type  cluster  members  are  fairly  unambiguous.  The  only  problem 
lies  in  the  possible  inclusion  of  nonmembers.  Naturally,  efforts  have  been  made  to 
avoid  this  source  of  error.  The  total  magnitudes  of  the  clusters  have  been  calculated 
by  adding,  logarithmically,  the  magnitudes  of  all  known  cluster  members.  This  was 
done  and  the  data  privately  communicated  to  the  author  by  B.  Skiff  of  Lowell 
Observatory.  The  open  cluster  table  of  The  Astronomical  Almanac  also  lists  the 
value  of  metallicity,  which  was  determined  by  various  methods  in  more  than  30 
different  investigations  and  transferred  to  a  consistent  set  of  data  by  Janes,  Tilley, 
and  Lynga.  The  definition  of  the  metallicity  ratio  is  the  logarithmic  ratio  of  the 
abundances  of  iron  and  hydrogen  divided  by  the  corresponding  ratio  for  the  solar 
spectrum.  In  practice,  metal  fines  other  than  those  of  iron  influence  the  parameter. 


10.316  The  Reliability  of  Open  Cluster  Data  Despite  great  efforts  to  assess  open 
cluster  data  critically,  it  is  quite  clear  that  the  set  can  never  be  quite  homogeneous. 
The  variations  in  brightness  of  the  objects  in  crowded  fields  and  in  observing  con- 
ditions contribute  to  an  intrinsic  variation  in  quality.  In  the  Lund  catalog,  several 
of  the  physical  parameters  have  been  assigned  weights  that  describe  in  a  compara- 
tive fashion  the  precision  of  the  data.  The  principles  for  weight  assignment  and  the 
analysis  have  been  described  in  Janes,  Tilley,  and  Lynga  (1988). 


526 

1 0.32   Globular  Star  Cluster  Data 


EXPLANATORY  SUPPLEMENT 


The  data  on  globular  clusters  given  in  The  Astronomical  Almanac  are  derived  from 
a  variety  of  sources.  The  list  of  clusters  itself  is  from  the  IAU's  "Star  Clusters 
and  Associations,"  which  incorporated  the  official  IAU  cluster  designations  (the 
four-digit,  sign,  three-digit  numbers  prefixed  by  a  "C"),  The  original  IAU  list  has 
been  supplemented  by  R.E.  White  as  a  result  of  his  triennial  literature  searches  to 
prepare  the  "Work  Published  and  In  Progress"  cluster-by-cluster  summary  for  each 
IAU  Reports  on  Astronomy  since  1975.  These  reports  are  not  compiled  after  the 
1988  IAU  General  Assembly.  Instead,  J.-C  Mermilliod,  at  the  Geneva  Observatory, 
continues  to  maintain  a  database  of  literature  over  open  and  globular  clusters.  A 
copy  resides  at  the  National  Optical  Astronomical  Observatories  in  Tucson,  AZ. 

The  clusters'  equatorial  coordinates  are  taken  from  Shawl  and  White's  (1986) 
listing  (preferred)  or  from  the  compilation  by  Webbink  (1985).  The  axial-ratio  data 
(b  I  a)- values  are  taken  exclusively  from  White  and  Shawl's  (1987)  extensive  list. 

10.321  The  Definition  of  a  Globular  Star  Cluster  The  celestial  objects  called  glob- 
ular  star  clusters  cannot  be  identified  by  a  casual  inspection  of  a  photographic  plate, 
instead  certain  criteria  must  be  met.  Foremost  among  the  "physical-appearance" 
criteria  is  a  cluster's  contrast  against  the  local  field:  The  globular  star  cluster  should 
be  seen  as  a  higher  image-density  object  than  the  surrounding  neighborhood  of  field 
stars.  The  cluster  should  also  appear  to  be  somewhat  compactly  organized  within  its 
own  image.  In  addition,  a  gradient  of  decreasing  areal  star  density  with  increasing 
radius  from  the  cluster  center  should  be  apparent. 

Globular  star  clusters  often  contain  short-period  variable  stars  of  the  RR  Lyrae 
class;  open  star  clusters  and  stellar  associations,  however,  never  contain  such  stars. 
The  brightest  stars  in  globular  clusters  are  red  giants,  and  are  seen  spectroscopically 
to  be  weak  in  their  abundance  of  heavy  elements  when  compared  to  the  solar 
abundance  of  same. 

However,  amongst  the  globular  clusters  resident  in  the  Milky  Way  Galaxy, 
exceptions  exist  to  all  of  the  aforementioned  criteria.  The  only  unambiguous  de- 
termination of  "globular  cluster-ness"  is  made  using  the  cluster's  color- magnitude 
diagram  (CMD) — globular  clusters  have  CMD's  that  range  in  the  values  of  (B-V) 
color  from,  approximately,  —0.6  to  +1.6.  There  is,  roughly,  a  2  to  3  magnitude 
difference  between  a  globular  cluster's  main  sequence  turn-off  and  the  apparent 
magnitude  level  of  its  horizontal  branch  (HB).  A  similar  magnitude  range  exists 
between  the  tip  of  the  red-giant  branch  and  the  HB,  although  this  difference  is 
subject  to  variation  as  a  function  of  a  cluster's  intrinsic  metal  abundance;  the  more 
metal-abundant,  the  smaller  the  difference  (but  not  less  than  2  mag.). 

Kinematically,  the  globulars  form  a  two-component  group,  again  as  a  function 
of  their  metal  abundances.  The  metal-rich  group  (between  10  and  50%  of  the  solar 


1 0  /  STARS  AND  STELLAR  SYSTEMS  527 

value)  are  seen  to  be  in  nearly  circular  orbits  that  are  confined  to  the  galactic  disk. 
The  metal-poor  group  (the  preponderance  of  the  146  known  globulars)  appear  to  be 
moving  in  highly  eccentric  elliptical  paths  around  the  center  of  the  Galaxy,  in  orbits 
with  planes  that  may  be  highly  inclined  to  the  general  plane  of  the  disk  (although 
the  orientation  of  the  clusters'  orbital  planes  to  the  disk  seems  to  be  quite  random). 
The  clusters  orbit  the  galactic  center  in  a  conventional  right-handed  sense,  the  only 
exception  (so  far)  being  NGC  3201  (C1015-461),  which  appears  to  be  in  a  retrograde 
galactic  orbit. 


10.322  The  Importance  of  Globular  Clusters  for  Galactic  Structure  Historically, 
the  globular  clusters  were  used  by  Harlow  Shapley  to  determine  the  Sun's  distance 
from  the  center  of  our  Galaxy.  Shapley's  work  led  to  the  realization  that  our  Sun  is 
not  in  the  Galaxy's  center,  as  had  been  cheerfully  assumed  up  to  then,  but  is  located 
about  two-thirds  of  the  radial  distance  outward  from  the  center.  The  circumstances 
that  led  to  Shapley's  discovery,  namely  the  presence  of  RR  Lyrae  variable  stars 
within  many  of  the  globulars,  still  makes  these  clusters  important  for  large-scale 
dynamical  and  kinematical  studies  of  our  Galaxy.  Because  many  external  galaxies 
also  show  evidence  of  a  globular  star  cluster  population,  the  Galaxy's  clusters  are 
also  useful  as  secondary  distance  estimators  to  these  more  distant  systems. 


10.323  The  Importance  of  Globular  Clusters  for  Stellar  Evolutionary  Studies  Be- 
cause the  many  stars  in  a  globular  cluster  are  at  the  same  distance  from  the  Sun, 
a  globular  cluster  CMD  involving  apparent  (visual)  magnitude  versus  visual  color- 
index  reveals  the  same  pattern  within  that  parametric  space  as  the  equivalent  dis- 
tribution of  stellar  characteristics  within  the  luminosity  versus  surface-temperature 
parametric  space.  Therefore,  the  globular  clusters  provide  the  theorist  with  test-bed 
situations  for  comparing  metal-weak  model  stars  against  low-metal  observational 
data.  The  globular  clusters  have  been  revealed  as  being  some  of  the  oldest  objects 
in  the  Galaxy,  with  ages  ranging  from  10  to  15  billion  years.  Hence,  observational 
studies  of  stellar  associations  provide  comparative  data  for  young,  metal-rich  stars; 
and  open  clusters  are  the  source  of  data  for  metal-rich  stars  intermediate  in  age. 
Globular  clusters  complete  the  observational  set  by  providing  astrophysical  param- 
eters for  the  old  and  metal-poor  stars  formed  in  the  initial  evolutionary  stages  of 
our  Galaxy. 


10.324  Basic  References  for  Globular  Clusters  Studies  There  has  not  been  a  sum- 
mary monograph  written  on  the  general  subject  of  the  globular  stars  clusters  for 
over  25  years  (Arp  1965;  Hogg  1959);  however,  because  new  information  on  clusters 


528 


EXPLANATORY  SUPPLEMENT 


is  developing  so  rapidly,  and  often  in  such  unexpected  directions  (e.g.,  X-ray  emis- 
sion from  point  sources  within  clusters),  writing  an  all-encompassing  monograph 
would  be  futile  at  present.  To  come  to  grips  with  current  states  of  research  areas 
concerning  the  clusters,  one  must  go  preferentially  to  the  colloquia  and  symposia 
held  under  the  auspices  of  the  IAU. 

General  summaries  on  the  subject  are  given  by  Arp  (1965)  and  Hogg  (1959). 
Data  collections  are  found  in  Kukarkin  (1974),  Hogg  (1973),  Philip  et  al.  (1976), 
Shawl  and  White  (1986),  and  White  and  Shawl  (1987).  Recent  colloquia  and  sym- 
posia are  IAU  Colloquium  No.  68  (Philip  and  Hayes,  1981),  IAU  Symposium  No, 
113  (Goodman  and  Hut,  1985),  NATO  Advanced  Study  Institute,  1978  (Hanes  and 
Madore,  1980),  IAU  Symposium  No.  126  (Grindlay  and  Philip,  1988),  and  IAU 
Symposium  No.  85  (Hesser,  1979). 

10.33   Bright  Galaxies 

The  194  galaxies  selected  for  inclusion  in  The  Astronomical  Almanac  are  generally 
brighter  than  5-band  magnitude  11.5  and/or  larger  than  4.5  arcminutes.  These 
galaxies  were  extracted  from  an  up-dated  version  of  the  Second  Reference  Catalogue 
of  Bright  Galaxies  (RC2)  (de  Vaucouleurs  et  al.  1976). 

A  galaxy's  morphological  type  is  based  on  the  revised  Hubble  system  described 
by  de  Vaucouleurs  (1959a,  1963).  The  system  includes  four  classes:  Ellipticals  (E), 
Lenticulars  (L),  Spirals  (S),  and  Irregulars  (I).  In  the  L  and  S  classes  (disk  galax- 
ies), two  families,  ordinary  (A)  and  barred  (B),  are  distinguished,  with  transition 
types  denoted  AB.  Each  family  can  exist  in  two  varieties,  depending  on  the  absence 
(s)  or  presence  (r)  of  an  inner  ring  structure,  with  transition  types  denoted  (rs).  In 
the  L  class,  the  relative  importance  of  the  two  major  components  of  a  galaxy — the 
spheroid  (or  bulge)  and  the  disk — is  denoted  by  the  superscript  "— "  (early,  i.e., 
most  similar  to  E),  "0"  (intermediate),  and  "+"  (late,  i.e.,  more  similar  to  S).  The 
stage  along  the  Hubble  sequence  of  spirals  is  denoted  by  a,  b,  c,  and  d  in  order  of 
decreasing  bulge-to-disk  ratio  and  increasing  development  of  the  arms.  The  tran- 
sition type  between  L  and  S  is  denoted  SO/a;  between  S  and  magellanic  irregulars 
(Im),  by  Sm.  Thus,  the  Large  Magellanic  Cloud  is  the  prototype  of  SB(s)m,  and 
the  Andromeda  galaxy  (M31)  of  SA(s)b.  An  outer  ring  structure  is  designated  by 
the  symbol  (R)  preceding  the  Hubble-stage  designation.  The  puzzling  nonmagel- 
lanic  irregulars,  of  which  M82  is  the  prototype,  are  designated  10.  Edge-on  systems 
are  signaled  by  the  suffix  "sp"  (for  "spindle").  Peculiarities  are  noted  by  the  suffix 
"pec."  For  more  detailed  discussions  of  galaxy  morphology,  see  Sandage  (1975)  and 
Buta  (1989). 

Because  physical  properties,  such  as  color  index,  hydrogen  index,  bulge-to-disk 
ratio,  and  so  on,  are  closely  correlated  with  stage  along  the  Hubble  sequence,  it  is 
convenient  to  attach  to  the  stage  a  numerical  scale,  T,  from  —5  at  E,  through  0 
at  SO/a,  to  10  at  Im.  The  luminosity  class,  L,  introduced  by  van  den  Bergh  (1960 


10  /  STARS  AND  STELLAR  SYSTEMS  529 

a,  b)-  or  better,  the  luminosity  index  A  =  {T  +  L)  I  10  (de  Vaucouleurs  1979) — is 
correlated  with  absolute  magnitude;  both  T  and  L  are  listed  in  the  table.  The  L 
scale,  as  used  in  RC2,  runs  from  1  for  a  bright  giant  galaxy,  to  9  for  a  faint  dwarf 
system.  The  precision  of  T  and  L  values  is  on  the  order  of  one  unit  or  better.  For 
details,  see  de  Vaucouleurs  (1977)  and  de  Vaucouleurs  et  al.  (1978). 

The  isophotal  apparent  major  diameter  of  galaxies  is  given  in  the  table  for  the 
isophote  level  25.0  B-magnitude  per  square  arcsecond  (5-m/ss).  The  level  corre- 
sponds roughly  to  the  visible  size  of  the  galaxy  image  seen  on  the  Palomar  Ob- 
servatory Sky  Survey  paper  prints  (blue  light),  and  to  the  diameters  listed  in  the 
Uppsala  General  Catalog  (Nilson,  1973)  or  northern  galaxies.  Note  that  isophotal 
diameters  are  not  metric  diameters.  The  former  depend  on  the  surface  brightness 
(specific  intensity)  of  the  galaxy  image.  The  latter  do  not  depend  on  surface  bright- 
ness, and  while  they  are  better  indications  of  the  true  size  of  galaxies,  they  are  more 
difficult  to  measure  and  are  not  yet  available  for  many  galaxies.  For  more  details, 
see  the  Introduction  to  RC2.  Note  that  to  avoid  negative  logarithms,  D25  is  given 
in  the  table  in  units  of  0.1  arcminute. 

The  ratio  of  the  major  and  minor  axes  at  the  isotope  level  25.0  5-m/ss  (R25  = 
D25  t  d.25)  is  also  listed  in  logarithmic  form.  The  precision  is  usually  better  than  0.1. 
The  isophotal  axis  ratios  given  in  the  table  are  corrected  for  the  systematic  errors 
that  affect  visual  measurements  of  photographic  plates  (Holmberg  1946,  de  Vau- 
couleurs 1959b).  (For  more  details  on  systematic  and  accidental  errors  in  diameter 
and  axis  ratios,  see  Paturel  et  al.,  1987.) 

The  total  apparent  S-band  magnitudes,  Bj,  are  generally  derived  from  photo- 
electric measurements  or  detailed  photographic  surface  photometry  in  the  Johnson 
B  system.  These  magnitudes  are  weighted  means  of  the  best  available  magnitudes 
extrapolated  to  infinity  to  allow  for  the  generally  small  fraction  of  the  luminosity 
contributed  by  the  outermost  regions  of  a  galaxy  as  explained  in  the  Introduction  to 
RC2.  The  precision  is  generally  0.1  mag  or  better.  (For  details,  see  de  Vaucouleurs 
and  Bollinger,  1977.)  For  some  applications,  the  observed  magnitudes  need  to  be 
corrected  for  galactic  and  internal  extinction,  which  are  both  controversial  and  un- 
certain by  0.1  to  0.2  mag  or  more  in  extreme  cases  (e.g.,  an  edge-on  spiral  galaxy 
near  the  galactic  plane). 

The  total  color  indices,  (B  -  V)T  and  (U-B)Tl  in  the  Johnson  U,  B,  V  systems 
are  as  observed;  i.e.,  uncorrected  for  galactic  and  internal  extinction.  The  range  is 
roughly  from;  +1.0  to  +0.3  for  (B-V)T,  and  +0.  6  to  -0. 3  for  (U-B)T  as  one  moves 
along  the  Hubble  sequence  from  E  (yellow-orange)  to  Im  (whitish)  through  L  and 
S  types.  By  an  oversimplification,  the  extreme  types  are  often  described  as  "red" 
and  "blue"  galaxies.  The  colors  give  crude  indications  of  the  energy  distribution 
in  the  continuum  and,  hence,  of  the  stellar  composition  of  a  galaxy.  However,  the 
colors  are  often  modified  by  line  emission  from  Hll  regions  (which  decreases  the 
color  index,  or  increases  the  blueness)  and  internal  dust  extinction  (which  increases 
the  color  index,  or  increases  the  redness). 


530  EXPLANATORY  SUPPLEMENT 

The  heliocentric  radial  velocity,  derived  from  optical  observations  and  21-cm 
neutral  hydrogen  radio  emission,  is  given  in  kms-1  and  calculated  with  the  optical 
convention  that  AA  /  A  =  V I  c.  For  the  small  redshifts  involved,  this  convention  is 
entirely  adequate.  For  a  discussion  of  systematic  and  accidental  errors  in  radial  ve- 
locities, see  the  Introduction  to  RC2.  The  radial  velocity,  V0 — corrected  for  galactic 
rotation  according  to  the  old  1AU  convention,  V0  =  V  +  300cosA,  where  A  -  the 
angle  to  the  solar  apex^is  also  listed.  For  cosmological  applications,  it  is  better 
to  replace  the  conventional  solar  motion  of  300  kms^1  toward  /  =  90°,  b  =  0°  (see 
Trans.  IAU,  XVIB,  201,  1977),  with  the  total  velocity  vector  of  366  kms-1  toward 
/  =  265°,  b  =  +55°  relative  to  the  cosmic  background  radiation  (see  de  Vaucouleurs 
et  al.  1981).  For  more  detailed  discussions  of  solar  motion  relative  to  different  ex- 
tragalactic  frames  of  reference,  see  de  Vaucouleurs  and  Peters  (1984). 

More  up-dated  data  on  bright  galaxies  can  be  found  in  the  Third  Reference 
Catalogue  of  Bright  Galaxies  (de  Vaucouleurs  et  al.  1991). 


10.34   Quasi-Stellar  Objects 

A  quasi-stellar  object  (hereafter,  QSO)  can  be  defined  as  an  object  with  a  large 
redshift  whose  optical  morphology  is  "quasi-stellar,"  (or  "starlike"  in  the  sense 
that  it  appears  as  an  unresolved  point  of  light  in  a  typical  optical  image).  Note 
that  the  terms  QSO  and  quasar  are  often  used  synonymously,  but  the  latter  refers 
technically  only  to  the  subset  of  QSOs  that  are  strong  radio  sources  (quasar  being 
a  contraction  of  quasi-stellar  radio  source). 

QSO  names  are  as  diverse  as  the  surveys  by  which  they  were  discovered.  Most 
QSOs  are  found  either  by  virtue  of  their  radio  emission  or  in  optical  surveys  designed 
to  select  objects  with  strong  emission-lines  and/or  unusual  colors.  The  QSOs  are 
designated  by  a  number  internal  to  a  survey  (e.g.,  3c  279  is  object  279  in  the  third 
Cambridge  radio  survey  and  UM  148  is  object  148  in  the  University  of  Michigan 
optical  survey)  or  by  appending  the  approximate  1950.0  coordinates  to  the  acronym 
denoting  a  survey  (e.g.,  PKS2203-18  is  taken  from  the  Parkes  radio  survey  and 
PG0026+12  from  the  Palomar-Green  optical  survey).  Note  that  there  is  wide  range 
in  the  accuracy  of  the  published  coordinates  for  QSOs,  but  a  significant  fraction 
(especially  the  radio-selected  QSOs)  have  positions  known  to  better  than  one  arcsec. 

The  most  critical  parameter  for  a  QSO  is  its  redshift, 

z  =  (A  -  A0)  /  A0,  (10.34-1) 

where  A0  and  A  are  laboratory  wavelength  and  observed  wavelength  respectively 
of  a  particular  spectral  feature.  QSO  redshifts  are  almost  always  measured  using 
the  strong,  broad  emission-lines  of  hydrogen,  helium,  and  other  heavier,  cosmically 
abundant  elements  that  are  the  trademark  of  a  QSO.  In  most  cases,  several  emission 


10  /  STARS  AND  STELLAR  SYSTEMS 


531 


lines  are  used  to  determine  the  redshift,  but  in  some  cases  only  a  single  emission- 
line  is  present  (usually  assumed  to  be  the  hydrogen  Lya  line  at  A0  =  1216  A,  the 
strongest  emission  line  in  a  typical  QSO  spectrum).  In  such  cases,  the  redshift  is 
evidently  uncertain.  Measured  QSO  redshifts  range  from  «  0. 1  to  >  4.  Note  that 
nuclei  of  many  galaxies  at  still  lower  redshifts  contain  objects  that  (apart  from  their 
low  redshifts  and  modest  luminosities)  are  essentially  identical  to  QSOs.  For  his- 
torical reasons,  these  are  usually  called  active  galactic  nuclei  {or,  more  specifically, 
Type  1  Seyfert  Nuclei)  and  are  not  considered  to  be  "true"  QSOs. 

In  addition  to  the  broad  emission  lines,  many  QSOs  (particularly  those  with 
large  redshifts)  have  a  host  of  narrow  absorption  lines.  The  most  common  lines  are 
due  to  hydrogen  Lya,  but  the  UV  resonance  lines  of  cosmically  abundant  heavy  ions 
(e.g.,  C+3,  Mg+1)  are  also  often  detected.  These  fines  almost  always  have  redshifts 
that  are  much  smaller  than  the  emission-line  redshift.  They  are  believed  to  be 
produced  in  intervening  galaxies  or  intergalactic  gas  clouds. 

Although  the  spectral-energy  distributions  of  some  QSOs  have  been  studied 
in  considerable  detail,  most  have  only  very  limited  data  available  (typically  UBV 
magnitudes  and  colors).  Radio-selected  QSOs  have  radio  flux  densities  at  several 
frequencies  and  a  radio  spectral  index  (a)  also  available.  The  radio  flux  densities 
are  given  in  Janskys  (Jy)  or  milfi-Janskys  (mJy),  where  1  Jy  -  10  26  Watts  m 
Hz^'.  The  spectral  index  is  defined  by  S(v)av~%  where  S  is  the  flux  density  at  a 
frequency  v. 

The  most  extensive  and  recent  compilations  of  QSOs  and  their  basic  proper- 
ties are  Hewitt  and  Burbidge  (1987)  and  Veron-Cetty  and  Veron  (1989).  A  good 
introduction  to  the  basic  phenomenology  of  QSOs  is  given  by  Weedman  (1986). 


1 0.4    SOURCES  CATEGORIZED  BY  WAVELENGTH  REGION 
10.41    Radio-Source  Positional  Calibrators 

The  list  of  233  radio-source  positions,  given  in  The  Astronomical  Almanac,  is  from 
Argue  et  al.  (1984).  This  list  was  compiled  by  a  working  group  under  IAU  Commis- 
sion 24  as  a  first  step  in  defining  a  catalog  of  extragalactic  objects  that  have  both 
radio  and  optical  counterparts.  Positions  in  the  fist  were  compiled  from  a  number  ot 
previously  published  catalogs.  The  origin  of  right  ascension  is  defined  by  the  right 
ascension  of  1226+023  (3C273B)  at  epoch  J2000.0,  12h26m06!6997,  as  computed  by 
Kaplan  et  al.  (1982),  and  based  on  the  B1950.0  position  determined  for  the  source 
by  Hazard  et  al.  (1971).  An  indication  of  a  position's  uncertainty  is  given  by  the 
number  of  digits  in  the  tabulated  coordinates;  the  end  figures  may  be  subject  to 
revision.  The  column  headed  S5aHz  gives  the  flux  density  in  Janskys  at  5  GHz. 
Fluxes  of  many  of  the  sources  vary,  however,  and  the  tabulated  flux  is  meant  to 
serve  only  as  a  rough  guide. 


532 

10.42   Radio-Flux  Calibrators 


EXPLANATORY  SUPPLEMENT 


The  calibration  of  radio-source  flux  densities,  in  absolute  terms,  is  an  essential  part 
of  observational  radio  astronomy.  The  basic  absolute  calibration  requires  the  use  of 
small  antennas,  the  gain  of  which  can  be  theoretically  calculated  or  measured  (see 
Findlay,  1966).  Such  small  antennas  can  be  used  only  to  determine  the  flux  densities 
of  the  strongest  three  radio  sources  (Cas  A,  Cyg  A,  and  Tau  A).  These  sources  are 
unsuitable  for  the  calibration  of  large  antennas,  particularly  at  high  frequencies, 
since  they  all  have  finite  sizes  and  are  all  partially  resolved.  It  is  therefore  necessary 
to  have  a  list  of  secondary  calibrators,  the  flux  densities  of  which  are  determined 
with  reference  to  the  strongest  sources  as  primary  standards.  The  flux  densities 
of  the  sources  given  in  The  Astronomical  Almanac  have  been  determined  in  this 
manner. 

The  data  in  the  table  were  taken  from  Baars  et  al.  (1977)  and  derived  in  the 
following  manner: 

(1)  The  absolute  spectrum  of  Cas  A,  with  its  secular  rate  of  decrease  taken  into 
account,  was  derived  for  epoch  1980.0  between  frequencies  of  300  MHz  and 
30  GHz. 

(2)  The  absolute  spectra  of  Cyg  A  and  Tau  A  were  derived  from  direct  mea- 
surements and  from  measurements  of  the  ratios  of  their  flux  density  to  that 
of  Cas  A. 

(3)  An  accurate  spectrum  for  the  somewhat  weaker  source  Vir  A  was  estab- 
lished from  direct,  accurate  ratios  of  its  flux  density  to  those  of  Cas  A  and 
Cyg  A. 

(4)  This  Vir  A  spectrum  was  used  as  a  basis  for  obtaining  accurate  relative 
spectra  of  the  sources  in  the  table,  these  sources  being  suitable  for  routine 
calibration  of  flux  densities. 

Only  three  sources  are  suitable  for  the  calibration  of  interferometers  and  syn- 
thesis telescopes — 3C48,  3C147  and  3C286  (the  positions  for  these  are  taken  from 
Elsmore  and  Ryle,  1976).  Some  other  sources  may  need  a  correction  for  angular 
size  when  used  with  the  largest  single  antennas  at  high  frequencies,  but  since  the 
sizes  are  well-known,  the  correction  is  easy  to  apply. 

It  must  be  emphasized,  first,  that  the  given  flux  densities  cover  a  range  from 
400  MHz  to  22  GHz:  extrapolation  beyond  this  range  is  dangerous.  Second,  al- 
though these  sources  have  "normal"  spectra,  characteristic  of  transparent  syn- 
chrotron sources,  some  do  contain  compact,  opaque  components  that  may  be  vari- 
able. For  example,  3C48  appears  to  show  some  variability  at  a  level  between  1 
percent  around  1.6  GHz  and  30  percent  around  20  GHz  (Perley  and  Crane,  1985). 
3C147  shows  variations  in  its  structure  on  milliarcsecond  scales  (Preuss  et  al.,  1984) 
and  its  flux  density  is  also  variable  (Simon  et  al,  1983,  Andrew  et  al.,  1981).  Accu- 
rate calibrations  of  flux  density  measurements  should  make  use  of  several  sources 
from  the  table,  so  that  such  effects  may  be  detected  and  allowed  for. 


10  /  STARS  AND  STELLAR  SYSTEMS 

10.43   X-Ray  Sources 


533 


The  X-ray  sources  given  in  The  Astronomical  Almanac  were  selected  from  those 
having  optical,  radio,  or  infrared  counterparts  listed  in  an  unpublished  Catalogue 
of  X-Ray  Positions  (Dolan,  1983).  The  master  list  of  sources  in  this  survey  file 
is  available  on  magnetic  tape  from  the  Astronomical  Data  Center,  Mail  Code  633, 
NASA  Goddard  Space  Flight  Center,  Greenbelt,  MD,  20771.  Access  to  the  cat- 
alog is  also  available  through  electronic  mail  via  Bitnet  at  W3WHW@SCFMVS 
or  via  SPAN  at  NSSDCA::WARREN.  The  original  references  for  the  position  and 
identification  of  each  source  are  contained  in  the  notes  to  the  catalog. 

Three  general  surveys  of  X-ray  sources  are  the  4U  catalog  (Forman  et  al.,  1978) 
the  2A  catalog  (Cooke  et  al.,  1978),  and  the  1H  catalog  (Wood  et  al.,  1984).  The 
sources  in  these  catalogs  are  designated  by  their  X-ray  location  in  the  equatorial 
coordinate  system  (equator  and  equinox  1950.0).  The  locations  are  given  as  right 
ascension  in  hours  and  minutes  and  declination  in  degrees  or  degrees  and  tenths,  and 
are  prefixed  by  the  satellite  initial  letter  and  the  edition  number  of  the  catalog  (4U 
=  Fourth  Uhuru  catalog;  2A  =  Second  Ariel  catalog;  1H  =  First  HEAO-1  catalog). 
Hence,  4U1656+35,  2A1655+353,  and  1H1656+354  all  designate  the  same  source 
in  the  three  different  catalogs. 

The  nomenclature  of  X-ray  source  designations  is  confusing,  primarily  for  his- 
torical reasons.  The  brightest  sources  in  the  X-ray  region  are  designated  by  constel- 
lation in  order  of  discovery.  The  letters  XR  (Friedman  et  al.,  1967)  or  X  (Giacconi 
et  al.,  1967)  are  appended  and  followed  by  a  number.  Thus,  Cyg  XR-1  and  Cyg 
X-l  are  the  same  source.  Certain  sources  in  the  Large  and  Small  Magellanic  Clouds 
receive  the  same  designation  with  LMC  or  SMC  instead  of  a  constellation  as  a  pre- 
fix. Another  common  usage  designates  sources  by  galactic  longitude  and  latitude 
prefixed  by  the  letters  GX  (Bradt  et  al.,  1968).  Still  other  sources  are  designated 
by  prefixing  the  initials  of  the  discover's  satellite,  institution,  or  name  to  a  running 
catalog  number  or  a  1950.0  equatorial  position.  IAU  Commission  48  decided  m 
1976  that  no  scheme  of  nomenclature  was  preferred  over  any  other  when  referring 
to  sources  designated  in  more  than  one  system.  The  discovery  designation  is  used  in 
The  Astronomical  Almanac.  When  no  discovery  designation  is  listed,  the  source  is 
always  referred  to  by  the  common  name  of  the  identified  counterpart.  The  IAU  rec- 
ommended in  1983  that  sources  newly  discovered  after  that  date  be  designated  by 
their  X-ray  position  in  right  ascension  and  declination  in  the  equatorial  coordinate 
system  of  1950.0. 

Tabulated  positions  are  based  on  published  positions  of  identified  counterparts. 
The  (2-6)  keV  flux,  in  units  of  10"11  erg  cm"^-'  (10-14  watt  m'2),  is  taken  from 
the  4U  catalog.  For  sources  with  variable  X-ray  intensities,  the  maximum  observed 
flux  from  the  4U  catalog  is  tabulated.  The  tabulated  magnitude  is  the  optical 
magnitude  of  the  counterpart  in  the  V  filter,  unless  marked  by  an  asterisk,  in 
which  case  the  B  magnitude  is  given.  Variable  magnitude  objects  are  denoted  by 


534  EXPLANATORY  SUPPLEMENT 

V — for  these  objects  the  tabulated  magnitude  pertains  to  maximum  brightness. 
Codes  specifying  the  class  of  objects  to  which  the  identified  counterpart  belongs 
are  explained  at  the  end  of  the  table. 


10.5  REFERENCES 

Andrew,  B.H.,  MacLeod,  J.M.,  and  Feldman,  PA.  (1981).  "Standard  Sources  at  10.6GHz 
and  Variability  in  3C147"  Astron.  Astrophys.  99,  36-38. 

Argue,  A.N.,  de  Vegt,  O,  Elsmore,  B.,  Fanselow,  J.,  Harrington,  R.,  Hemenway,  P.,  John- 
ston, K.J.,  Kuhr,  H.,  Kumkova,  L,  Niell,  A.E.,  Walter,  H.,  and  Witzel,  A.  (1984).  "A 
Catalog  of  Selected  Compact  Radio  Sources  for  the  Construction  of  an  Extragalactic 
Radio/Opticai  Reference  Frame"  Astron.  Astrophys.  130,  191-199. 

Arp,  H.C.  (1965).  "Globular  Clusters  in  the  Galaxy"  in  Galactic  Structure  A.  Blaauw 
and  M.  Schmidt,  eds.  Vol.  V  of  Stars  and  Stellar  Systems  G.P.  Kuiper  and  B.M. 
Middlehurst,  eds.  (University  of  Chicago  Press:  Chicago),  pp.  401-434. 

Baars,  J.W.M.,  Genzel,  R.,  Pautiny-Toth,  I.I.K.,  and  Witzel,  A.  (1977).  "The  Absolute 
Spectrum  of  Cas  A;  An  Accurate  Flux  Density  Scale  and  a  Set  of  Secondary  Calibra- 
tors" Astron.  Astrophys.  61,  99-106. 

Batten,  A.H.  (1985).  "Radial- Velocity  Standards"  in  Stellar  Radial  Velocities,  IAU  Coll. 
No.  88  A.G.D.  Philip  and  D.W.  Latham,  eds.  (L.  Davis  Press:  Schenectady). 

Batten,  A.H.,  Fletcher,  J.M.,  and  MacCarthy,  D.G.  (1989).  "Eighth  Catalogue  of  the 
Orbital  Elements  of  Spectroscopic  Binary  Systems"  Pub.  Dominion  Astrophysical 
Observatory  XVII,  1-317. 

Bessell,  M.S.  (1986).  "  VRI  Photometry  III:  Photographic  and  CCD  R  and  /  Bands  and 
the  Kron-Cousins  RI  System"  Pub.  Astron.  Soc.  Pac.  98,  1303-1311. 

Bessell,  M.S.  and  Weis,  E.W.  (1987).  "The  Cousins  and  Kron  VRI  Systems"  Pub.  Astron. 
Soc.  Pac.  99,  642-644. 

Bidelman,  W.P.  (1969).  "Stellar  Spectra  and  Spectral  Types"  in  Stellar  Astronomy,  H.-Y. 

Chiu,  R.L.  Warasila,  and  J.L.  Remo,  eds.  (Gordon  and  Breach,  New  York),  Volume 

1,  pp.  147-206. 
Bidelman,  W.P.  (1991).  Private  communication. 

Bradt,  H.,  Naranan,  S.,  Rappaport,  S.,  and  Spada,  G.  (1968).  "Celestial  Positions  of  X-Ray 

Sources  in  Sagittarius"  Astrophys.  J.  152,  1005-1013. 
Buta.R.J.  (1989).  "Galaxy  Morphology  and  Classification"  in  The  World  of  Galaxies  H.G. 

Corwin  and  L.  Bottinelli,  eds.  (Springer  Verlag,  New  York),  pp.  29-47. 
Campbell,  B.,  Walker,  G.A.H.,  and  Yang,  S.  (1988).  "A  Search  for  Substellar  Companions 

to  Solar-Type  Stars"  Astrophys.  J.  331,  902-921. 
Cooke,  B.A.,  Ricketts,  M.J.,  Maccacaro,  T.,  Pye,  J. P.,  Elvis,  M.,  Watson,  M.G.,  Griffiths, 

R.E.,  Pounds,  K.A.,  McHardy,  I.,  Maccagni,  D.,  Seward,  F.D.,  Page,  C.G.,  and  Turner, 

M.J.L.  (1978).  "The  Ariel  V  (SSI)  Catalog  of  High  Galactic  Latitude  (|b|  >10  deg.), 

X-Ray  Sources"  Mon.  Not.  R.  Astron.  Soc.  182,  489-515. 
Cousins,  A.W.J.  (1976).  "  VRI  Standards  in  the  E  Regions"  Mem.  R.  Astron.  Soc.  81, 

25-36. 

Crawford,  D.L.  and  Barnes,  J.V.  (1970).  "Standard  Stars  for  uvby  Photometry"  Astron. 
J.  75,  978-998. 

Crawford,  D.L.  and  Mander,  J.  (1966).  "Standard  Stars  for  Photoelectric  H-Beta  Pho- 
tometry" Astron.  J.  71,  114-118. 


10  /  STARS  AND  STELLAR  SYSTEMS 


535 


Curtis,  R.H.  (1932).  "Classification  and  Description  of  Stellar  Spectra"  in  Handbuch  der 

Astrophysik  Part  V  (J.  Springer,  Berlin),  pp.  1-108. 
de  Vaucouleurs,  G.  (1959a).  "Classification  and  Morphology  of  External  Galaxies"  in 

Handbuch  der  Physik  S.  Flugge,  ed.  (Springer- Verlag,  Berlin),  53,  275-310. 
de  Vaucouleurs,  G.  (1959b).  "Photographic  Dimensions  of  the  Brighter  Galaxies"  Astron. 

J.  64,  397-409. 

de  Vaucouleurs,  G.  (1963).  "Revised  Classification  of  1500  Bright  Galaxies"  Astrophys.  J. 
Suppl.  8,  31-97. 

de  Vaucouleurs,  G.  (1977).  "Qualitative  and  Quantitative  Classifications  of  Galaxies"  in 
The  Evolution  of  Galaxies  and  Stellar  Populations  B.M.  Tinsley  and  R.B.  Larson, 
eds.  (Yale  Univ.  Observatory,  New  Haven),  pp.  43-96. 

de  Vaucouleurs,  G.  (1979).  "The  Extragalactic  Distance  Scale.  V.  Tertiary  Distance  Indi- 
cators" Astrophys.  J.  227,  380-390. 

de  Vaucouleurs,  G.,  de  Vaucouleurs,  A.,  and  Corwin,  H.G.,  Jr.  (1976).  Second  Reference 
Catalogue  of  Bright  Galaxies,  (RC2),  (University  of  Texas  Press,  Austin),  pp.  1-396. 

de  Vaucouleurs,  G.  and  Bollinger,  G.  (1977).  "Contributions  to  Galaxy  Photometry.  VI. 
Revised  Standard  Total  Magnitudes  and  Colors  of  228  Multiply  Observed  Galaxies" 
Astrophys.  J.  Suppl.  34,  469-477. 

de  Vaucouleurs,  G.,  de  Vaucouleurs,  A.,  and  Corwin,  H.G.,Jr.  (1978).  "Systematic  and 
Accidental  Errors  in  Galaxy  Luminosity  Classification"  Astron.  J.  83,  1356-1359. 

de  Vaucouleurs,  G.,  Peters,  W.L.,  Bottinelli,  L.,  Gouguenheim,  L.,  and  Paturel,  G.  (1981). 
"Hubble  Ratio  and  Solar  Motion  from  300  Spirals  Having  Distances  Derived  from  H 
I  Line  Widths"  Astrophys  J.  248,  408-422. 

de  Vaucouleurs,  G.,  and  Peters,  W.L.  (1984).  "The  Dependence  on  Distance  and  Redshift 
of  the  Velocity  Vectors  of  the  Sun,  the  Galaxy,  and  the  Local  Group  with  Respect  to 
Different  Extragalactic  Frames  of  Reference"  Astrophys.  J.  287,  1-16. 

de  Vaucouleurs,  G.,  de  Vaucouleurs,  A.,  Corwin,  H.G.,  Buta,  R.,  Paturel,  G.,  and  Fouque, 
P.  (1991)  Third  Reference  Catalogue  of  Bright  Galaxies,  (Springer- Verlag,  New  York). 

Dolan,  F.  (1983).  Private  communication. 

Egret,  D.  and  Wegner,  M.  (1988).  "SIMBAD-Present  Status  and  Future"  in  Astronomy 
From  Large  DatabasesESO  Conference  and  Workshop  Proceedings  No.  28  F.  Murtagh 
and  A.  Heck,  eds.  (European  Southern  Observatory,  Munich),  pp.  323-328. 

Elsmore,  B.  and  Ryle,  M.  (1976).  "Further  Astrometric  Observations  with  the  5-km.  Radio 
Telescope"  Mon.  Not.  R.  Astron.  Soc.  174,  411-423. 

Explanatory  Supplement  to  the  Ephemeris  (1961).  Prepared  jointly  by  the  Nautical  Alma- 
nac Offices  of  the  United  Kingdom  and  the  United  States  of  America  (Her  Majesty's 
Stationary  Office,  London). 

Findlay,  J.W.  (1966).  "Absolute  Intensity  Calibrations  in  Radio  Astronomy"  Ann.  Rev. 
Astron.  Astrophys.  4,  77-94 

Forman,  W.,  Jones,  C,  Cominsky,  L.,  Julien,  P.,  Murray,  S.,  Peters,  G.,  Tananbaum,  H., 
and  Giacconi,  R.  (1978).  "The  Fourth  Uhuru  Catalog  of  X-Ray  Sources"  Astrophys. 
J.  Supp.  38,  357-412. 

Friedman,  H.,  Bryan,  E.T.,  and  Chubb,  T.A.  (1967).  "Distribution  and  Variability  of 

Cosmic  X-Ray  Sources"  Science  156,  374-378. 
Garrison,  R.F.,  ed.  (1984).  The  MK  Process  and  Stellar  Classification  (David  Dunlap  Obs., 

Toronto),  pp.  1-423. 

Giacconi,  R.,  Gorenstein,  P.,  Gursky,  H.,  and  Waters,  J.R.  (1967).  "An  X-Ray  Survey  of 
the  Cygnus  Region"  Astrophys.  J.  148,  L119-L127. 


536 


EXPLANATORY  SUPPLEMENT 


Goodman,  J.  and  Hut,  P.,  eds.  (1985).  Dynamics  of  Star  Clusters,  IAU  Symposium  No. 

113  (Reidel,  Dordrecht,  Holland),  pp.  1-622. 
Gray,  R.O.  (1989).  "The  Extension  of  the  MK  Spectral  Classification  System  to  the  In- 
termediate Population  II  F-Type  Stars"  Astron.  J.  98,  1049-1062. 
Grindlay,  J.E.  and  Philip,  A.G.D.,  eds.  (1988).  Globular  Clusters  Systems  in  Galaxies,  IAU 

Symposium  No.  126,  The  Harlow  Shapley  Centenary  Commemorative  Symposium 

(Kluwer,  Dordrecht,  Holland),  pp.  1-751. 
Hanes,  D.  and  Madore,  B.,  eds.  (1980).  Globular  Clusters  Proceedings  of  NATO  Advanced 

Study  Institute,  Institute  of  Astronomy,  August,  1978  (Cambridge  University  Press, 

Cambridge,  MA),  pp.  1-390. 
Hazard,  C,  Sutton,  J.,  Argue,  A.N.,  Kenworthy,  CM.,  Morrison,  L.V.,  and  Murray,  C.A. 

(1971).  "Accurate  Radio  and  Optical  Positions  of  3C  273B"  Nature  Phys.  Sci.  233, 

89-91. 

Hesser,  J.E.,  ed.  (1979).  Star  Clusters,  IAU  Symposium  No.  85,  (Reidel,  Dordrecht,  Hol- 
land), pp.  1-516. 

Hewitt,  A.  and  Burbidge,  G.  (1987).  "A  New  Optical  Catalog  of  Quasi-Stellar  Objects" 

Astrophys.  J.  Supp.  63,  1-246. 
Hewitt,  A.  and  Burbidge,  G.  (1989).  "The  First  Addition  to  the  New  Optical  Catalog  of 

Quasi-Stellar  Objects"  Astrophys.  J.  Supp.  69,  1-63. 
Hirshfeld,  A.  and  Sinnott,  R.W.,  eds.  (1982).  Sky  Catalogue  2000.0,  Volume  1,  Stars  to 

Magnitude  8.0,  (Sky  Publishing,  Cambridge,  MA  and  Cambridge  University  Press, 

Cambridge,  England),  pp.  1-604. 
Hoffleit,  D.  and  Jaschek,  C.  (1982).  The  Bright  Star  Catalogue,  Fourth  Revised  Edition 

(Yale  University  Observatory,  New  Haven),  pp.  1-472. 
Hogg,  H.S.  (1973).  A  Third  Catalogue  of  Variable  Stars  in  Globular  Clusters  Comprising 

2119  Entries  Volume  3,  Number  6  (David  Dunlap  Obs.,  Toronto),  pp.  1-75. 
Hogg,  H.S.  (1959).  "Star  Clusters"  in  Handbuch  der  Physik,  53  S.  Flugge,  ed.  (Springer- 

Verlag,  Berlin),  pp.  129-207. 
Holmberg,  E.  (1946).  "The  Apparent  Diameters  and  the  Orientation  in  Space  of  Extra- 
galactic  Nebulae"  Medd  Lund  Astron.  Obs.  Series  II,  117,  pp.  1-82. 
International  Astronomical  Union  (1957).  Transactions,  Volume  IX (Cambridge  University 

Press,  Cambridge,  England),  p.  442. 
International  Astronomical  Union  (1973).  Transactions,  Volume  XVA  (Reidel,  Dordrecht, 

Holland),  p.  409. 

International  Astronomical  Union  (1988).  Transactions,  Volume  XXA  (Reidel,  Dordrecht, 
Holland),  p.  362. 

International  Astronomical  Union  (1990).  Transactions,  Volume  XXB  (Reidel,  Dordrecht, 
Holland),  p.  267. 

Irwin,  A.W.,  Campbell,  B.,  Morbrey,  C.L.,  Walker,  G.A.H.,  and  Yang,  S.  (1989).  "Long- 
Period  Radial- Velocity  Variations  of  Arcturus"  Pub.  Astron.  Soc.  Pac.  101,  147-159. 

Janes,  K.A.,  Tilley,  C,  and  Lynga,  G.  (1988).  "Properties  of  the  Open  Cluster  System" 
Astron.  J.  95,  771-784. 

Johnson,  H.L.  (1963).  "Photometric  Systems"  in  Basic  Astronomical  Data  K.A.  Strand, 
ed.  Volume  III  of  Stars  and  Stellar  Systems,  G.P.  Kuiper  and  B.M.  Middlehurst,  eds. 
(University  of  Chicago  Press,  Chicago),  pp.  204-224. 

Johnson,  H.L.,  Mitchell,  R.I.,  Iriarte,  B.,  and  Wisniewski,  W.Z.  (1966).  "UBVRIJKL  Pho- 
tometry of  the  Bright  Stars"  Communications  of  the  Lunar  and  Planetary  Laboratory 
4,  63,  99-241. 


10  /  STARS  AND  STELLAR  SYSTEMS 


537 


Johnson,  H.L.  and  Morgan,  W.W.  (1953).  "Fundamental  Stellar  Photometry  for  Standards 
of  Spectral  Type  on  the  Revised  System  of  the  Yerkes  Spectral  Atlas"  Astrophys.  J. 
117,  313-352, 

Kaplan,  G.H.,  Josties,  F.J.,  Angerhofer,  P.E.,  Johnston,  K.J.,  and  Spencer,  J.H.  (1982). 
"Precise  Radio  Source  Positions  from  Interferometric  Observations"  Astron.  J.  87 
570-576. 

Keenan,  PC.  and  McNeil,  R.C.  (1976).  An  Atlas  of  Spectra  of  the  Cooler  Stars  (Ohio 

State  University  Press,  Columbus). 
Keenan,  P.C.  and  Morgan,  W.W.  (1951).  "Classification  of  Stellar  Spectra"  in  Astrophysics 

J.A.  Hynek,  ed.  (McGraw-Hill,  New  York),  p.  12-28. 
Kholopov,  P.N.,  ed.  (1985).  General  Catalogue  of  Variable  Stars,  fourth  ed.,  Volume  I 

1985,  pp.  1-376;  Volume  II,  1985,  pp.  1-360;  Volume  III,  1987,  pp.  1-368  (Nauka 

Publ.  House,  Moscow). 
Kron,  G.E.,  Gascoigne,  S.C.B.,  and  White,  H.S.  (1957).  "Red  and  Infrared  Magnitudes 

for  282  Stars  with  Known  Trigonometric  Parallaxes"  Astron.  J.  62,  205-220. 
Kukarkin,  B.V.  (1974).  General  Catalogue  of  The  Globular  Star  Clusters  of  a  Galaxy 

containing  Physical  Characteristics  of  129  Objects  Reduced  to  One  System  (Nauka 

Press,  Moscow),  pp.  4-136. 
Landolt,  A.U.  (1973).  "  UBV  Photoelectric  Sequences  in  the  Celestial  Equatorial  Selected 

Areas  92-115"  Astron.  J.  78,  959-981. 
Landolt,  A.U.  (1983).  "  UB  VR1  Photometric  Standard  Stars  Around  the  Celestial  Equa- 
tor" Astron.  J.  88,  439-460. 
Lyne,  A.,  Manchester,  R.N.,  and  Taylor,  J.H.  (1993).  In  preparation. 

Lynga,  G.  (1988).  "The  Lund  Catalog  of  Open  Cluster  Data"  in  Astronomy  From  Large 
Databases,  ESO  Conference  and  Workshop  Proceedings  No.  28  F.  Murtagh  and  A. 
Heck,  eds.  (European  Southern  Observatory,  Munich)  pp.  379-382. 

Manchester,  R.N.  and  Taylor,  J.H.  (1977).  Pulsars,  (W.H,  Freeman,  San  Fransisco).  pp. 
1-281. 

Manchester,  R.N.  and  Taylor,  J.H.  (1981)  "Observed  and  Derived  Parameters  for  330 
Pulsars"  Astron.  J.  86,  1953-1973. 

McCarthy,  M.F.,  Philip,  A.G.D.,  and  Coyne,  G.V.,  eds.  (1979).  Spectral  Classification  of 
the  Future  IAU  Colloquium  No.  47  (Vatican  Obs,  Vatican  City),  pp.  1-375. 

Mermilliod,  J.C.  (1984).  "Compilation  of  Photometric  Data:  Present  State  and  Projects" 
Bull.  Inform.  CDS  26,  3-7. 

Morgan,  W.W.  and  Keenan,  P.C.  (1973).  "Spectral  Classification"  Annual  Rev.  of  Astron- 
omy and  Astrophysics  11,  29-50. 

Morgan,  W.W.,  Abt,  H.A.,  and  Tapscott,  J.W.  (1978).  Revised  MK  Spectral  Atlas  for 
Stars  Earlier  than  the  Sun  (Yerkes  Observatory.  Chicago  and  Kitt  Peak  Nat'l.  Obs.. 
Tucson). 

Morgan,  W.W.,  Keenan,  P.C.,  and  Kellman,  E.  (1943).  .4n  Atlas  of  Stellar  Spectra  (Uni- 
versity of  Chicago  Press,  Chicago). 

Nicolet,  B.  (1978).  "Catalogue  of  Homogeneous  Data  in  the  UBV  Photoelectric  Photo- 
metric System"  Astron.  Astrophys.  Supp.  34,  1-49. 

Nilson,  P.  (1973).  Uppsala  General  Catalogue  of  Galaxies  (Roy.  Soc.  Sci.  Uppsala.  Upp- 
sala), pp.  1-456. 

Ochsenbein,  P.  and  Dubois,  P.  (1986).  "Some  Aspects  of  the  Bibliography  of  Astronomical 
Objects"  Bull.  Inform.  CDS  31,  137-140. 


538 


EXPLANATORY  SUPPLEMENT 


Paturel,  G.,  Fouque,  P.,  Lauberts,  A.,  Valentijn,  E.A.,  Corwin,  H.G.,  and  de  Yaucouleurs, 
G.  (1987).  "Standard  Photometric  Diameters  of  Galaxies  III.  Reduction  of  the  Diam- 
eters in  the  ESO-B  and  SGC  Catalogues  to  the  Standard  Diameter  System  at  the  25 
mag  arcsec~2  Brightness  Level"  Astron,  Astrophys.  184,  86-92. 

Pedoussaut,  A.,  Carquillat,  J.M.,  Ginestet,  N.,  and  Vigneau,  J.  (1988).  "Binaires  Spectro- 
scopiques.  15e  Catalogue  Complementaire"  Astron.  Astrophys.  Suppl.  75,  441-443. 

Perley,  R.  and  Crane,  P.  (1985).  "3C  48  Variability"  NRAO  Newsletter  no.  25,  p.  1. 

Perry,  C.L.,  Olsen,  E.H.,  and  Crawford,  D.L.  (1987).  "A  Catalog  of  Bright  uvby(beta) 
Standard  Stars"  Pub.  Astron.  Soc.  Pac.  99,  1184-1200. 

Philip,  A.G.D.,  Cullen,  M.F.,  and  White,  R.E.  (1976).  "IW Color-  Magnitude  Diagrams 
of  Galactic  Globular  Clusters"  Dudley  Observatory  Reports  (Dudley  Observatory,  Al- 
bany), pp.  1-186. 

Philip,  A.G.D.  and  Hayes,  D.S.,  eds.  (1981).  Astrophysical  Parameters  for  Globular  Clus- 
ters, I.A.U.  Colloquium  No.  68  (L.  Davis  Press,  Schenectady),  pp.  1-614. 

Preuss,  E.,  Alef,  W.,  Whyborn,  N.,  Wilkinson,  P.,  and  Kellermann,  K.  (1984).  "The  Mil- 
liarcsecond  Core  of  3C  147  at  6  cm"  in  VLBI  and  Compact  Radio  Sources,  R.  Fanti, 
K,  Kellermann,  and  G.  Setti,  eds.  IAU  Symp.  No.  110  (Reidel,  Dordrecht,  Holland), 
p.  29. 

Rawley,  L.N.,  Taylor,  J.H.,  and  Davis,  M.M.  (1988).  "Fundamental  Astrometry  and  Mil- 
lisecond Pulsars"  Astrophs.  J.  326,  947-953. 

Sandage,  A.  (1975).  "Classification  and  Stellar  Content  of  Galaxies  Obtained  from  Direct 
Photography"  in  Galaxies  and  the  Universe  A.  Sandage,  M.  Sandage,  and  J.  Kristian, 
eds.  Volume  IX  of  Stars  and  Stellar  Systems  (University  of  Chicago  Press,  Chicago), 
pp.  1-35. 

Schmidt-Kaler,  Th.  (1982),  "Calibration  of  the  MK  System"  in  Landolt-Bornstein,  New 

Ser.,  Gr.  VI,  2b,  pp.  14-24  and  451-456.  ( Springer- Verlag,  Berlin). 
Shawl,  S.J.  and  White,  R.E.  (1986).  "Accurate  Optical  Positions  for  the  Centers  of  Galactic 

Globular  Clusters"  Astron.  J.  91,  312-316. 
Simon,  R.S.,  Readhead,  A.C.S.,  Moffet,  AT.,  Wilkinson,  P.N.,  Allen,  B.,  and  Burke  B.F. 

(1983).  "Low  Frequency  Variability  and  Predicted  Superluminal  Motion  in  3C  147" 

Nature  302,  487-490. 

Stromgren,  B.  (1963).  "Quantitative  Classification  Methods"  in  Basic  Astronomical  Data 
K.A.  Strand,  ed.  Vol  III  of  Stars  and  Stellar  Systems  G.P.  Kuiper  and  B.M.  Middle- 
hurst,  eds.  (University  of  Chicago  Press,  Chicago),  pp.  123-191. 

Taylor,  B.J.  (1986).  "Transformation  Equations  and  Other  Aids  for  VRI  Photometry" 
Astrophys.  J.  Supp.  60,  577-599. 

Trumpler,  R.J.  (1930).  "Preliminary  Results  on  the  Distances,  Dimensions  and  Space 
Distribution  of  Open  Star  Clusters"  Lick  Observatory  Bulletin  14,  154-188. 

van  den  Bergh,  S.  (1960a).  "A  Preliminary  Luminosity  Classification  of  Late-Type  Galax- 
ies" Astrophys.  J.  131,  215-223. 

van  den  Bergh,  S.  (1960b).  "A  Preliminary  Luminosity  Classification  for  Galaxies  of  Type 
Sb"  Astrophys.  J.  131,  558-573. 

Veron-Cetty,  M.-P.  and  Veron,  P.  (1989).  "A  Catalog  of  Quasars  and  Active  Nuclei"  4th 
ed.  ESO  Scientific  Report  No. 7  (European  Southern  Observatory,  Munich),  pp.  1-143. 

Webbink,  R.F.  (1985).  "Structure  Parameters  of  Galactic  Globular  Clusters"  in  Dynamics 
of  Star  Clusters,  J.  Goodman  and  P.  Hut,  eds.  IAU  Symposium  No.  113,  (Reidel, 
Dordrecht,  Holland),  pp.  541-577. 

Weedman,  D.W.  (1986).  Quasar  Astronomy  (Cambridge  University  Press,  Cambridge, 
England),  pp.  1-217. 


10  /  STARS  AND  STELLAR  SYSTEMS 


539 


Wegner,  M.,  Egret,  D.,  and  Ochsenbein,  F.  (1989).  SI  MB  AD  User's  Guide,  (English  ver- 
sion by  Wayne  H.  Warren,  Jr.,  of  NSSDC,  and  Joyce  M.  Watson,  of  SAO).  (CDS, 
Strasbourg) 

White,  R.E.  and  Shawl,  S.J.  (1987).  "Axial  Ratios  and  Orientations  for  100  Galactic 

Globular  Star  Clusters"  Astrophys.  J.  317,  246-263. 
Wood,  F.B.,  Oliver,  J.P.,  Florkowski,  D.R.,  and  Koch,  R.H.  (1980).  "A  Finding  List  for 

Observers  of  Interacting  Binary  Stars"  Pub.  University  of  Pennsylvania,  Astron.  Ser. 

XII,  pp.  1-349. 

Wood,  K.S.,  Meekins,  J.F.,  Yentis,  D.J.,  Smathers,  H.W.,  McNutt,  D.P.,  Bleach,  R.D., 
Byram,  E.T.,  Chubb,  T.A.,  and  Friedman,  H.  (1984)  "The  HEAO  A-l  X-Ray  Source 
Catalog"  Astrophys.  J.  Supp.  56,  507-649. 


CHAPTER 


Computational  Techniques 

by  R.L.  Duncombe 


1 1 .1    INTRODUCTION  TO  COMPUTING  TECHNIQUES 

In  this  section  we  will  examine  several  computing  techniques  of  special  relevance  to 
astronomical  calculation.  For  a  more  general  treatment,  see  textbooks  on  computing 
methods  and  numerical  analysis.  A  short  note  on  elementary  computing  principles 
is  also  included  in  Interpolation  and  Allied  Tables,  which  covers  the  sources  of  mis- 
takes, the  nature  of  checks,  and  the  nature  and  effect  of  the  inevitable  errors  due  to 
rounding-off  and  other  causes.  These  topics,  although  of  fundamental  importance, 
are  not  discussed  here. 

An  important  principle  of  computation  is  that  the  data  used  determines  the 
maximum  precision  of  a  calculation.  This  precision  can  be  reduced  by  poor  comput- 
ing— for  example,  by  a  poor  choice  of  formula  or  by  the  failure  to  retain  an  adequate 
number  of  figures  in  the  intermediate  stages — but  it  can  never  be  increased.  Gen- 
erally no  simple  relation  exists  between  the  errors  (absolute  or  relative)  of  the  final 
result  and  of  the  data,  though  a  relation  can  readily  be  seen  numerically  by  follow- 
ing through  the  calculation  step  by  step,  and  often  geometrically.  It  is  misleading 
to  quote  a  result  to  more  figures  than  is  justified  by  the  data  on  which  it  is  based, 
and  it  is  erroneous  to  do  so  if  an  inadequate  number  of  figures  have  been  retained 
in  the  intermediate  stages. 

Retaining  more  figures  than  necessary  is  a  waste  of  effort  if  it  significantly 
increases  the  work  involved.  In  some  operations,  however,  especially  in  those  done 
on  a  computer  or  a  personal  computer,  extra  figures  involve  very  little  additional 
work;  but  in  other  operations,  an  extra  figure  may  require  a  more  elaborate  formula 
or  extra  word  length,  resulting  in  much  more  additional  work.  A  suitable  number  of 
figures  is  that  which  offers  the  greatest  convenience  consistent  with  the  building-up 
error,  due  to  accumulation  of  rouiuling-offs,  not  exceeding  the  error  of  the  data; 
this  must  be  judged  in  relation  to  each  calculation. 

541 


542 


EXPLANATORY  SUPPLEMENT 


Figure  11.1.1 

Spherical  triangle 


Mathematical  formulas,  if  correct,  adequately  give  a  desired  precision  in  the 
result;  but  they  may  be  inefficient,  inconvenient,  and  misleading.  One  example  is 
the  inefficiency  of  determining  a  small  angle  from  its  cosine;  for  a  stated  precision  of 
angular  measurement  the  number  of  decimals  in  the  cosine  is  inversely  proportional 
to  the  angle;  and  for  a  fixed  number  of  decimals  in  the  cosine  (the  usual  and 
convenient  case)  the  precision  obtainable  decreases  as  the  angle  decreases.  Consider, 
for  example,  the  formula  for  the  third  side  of  a  spherical  triangle,  (Figure  11.1.1) 
given  two  sides  and  the  included  angle, 

cos  a  =  cos  b  cos  c  +  sin  b  sin  c  cos  A  =  z,  (11.1-1) 

in  which  a  is  to  be  determined  from  measured  values  of  b,  c,  and  A.  When  a  is 
small,  it  can  be  found  to  the  same  precision  as  the  data  only  by  the  apparently 
incorrect  procedure  of  retaining  more  decimals  in  each  trigonometric  function  on 
the  right-hand  side  (z)  of  the  equation  than  the  data  appear  to  justify.  This  is 
legitimate  because  both  b-c  and  A  must  be  small  so  that  their  cosines  are  known 
to  extra  figures.  There  are  circumstances,  however,  in  which  the  inconvenience  of 
such  a  procedure  is  outweighted  by  other  factors. 

The  apparent  failure  of  a  mathematical  formula  should  not  be  confused  with 
real  geometrical  limitations  of  precision.  In  the  spherical  triangle  ABC, 


sin  a  sin  B  =  sin  b  sin  A  =  x, 

sin  a  cos  Z?  =  cos  6  sin  c  —  sin   cos  c  cos  A  =  y\ 


(11.1-2) 


11  /  COMPUTATIONAL  TECHNIQUES 


543 


bot  h  x  and  y  are  small  (y  by  the  cancellation  of  two  nearly  equal  components)  if  a  is 
small.  It  is  not  legitimate  here  to  use  extra  figures  in  the  trigonometric  functions  in  x 
and  y,  and  B  can  be  found  with  a  precision  only  proportional  to  cosec  a;  this  precision 
is,  however,  clearly  adequate  to  fix  the  point  C  (from  BA).  Similar  arguments  hold 
for  the  angle  C.  Neither  B  nor  C  can  individually  be  determined  as  precisely  as  6, 
C,  or  A;  but  the  sum  B  +  C  can  be  so  determined,  as  may  be  seen  from  geometric 
considerations  and  from  the  equation 

1  cos  Ub  +  c)  1 

cot-(fl  +  C)=  f-        tan  -A.  (11.1-3) 

2  cos  ~{b  -c)  2 

Important  problems  in  astronomy  may  require  the  sum  (or  difference)  of  two  angles 
to  be  known  more  precisely  than  is  possible  with  either  (for  example,  the  elements 
of  a  planetary  orbit);  therefore,  great  care  is  required  in  handling  them.  The  rec- 
ommended method  is  to  determine  one  of  the  angles  and  then  treat  it  as  exact  in 
finding  the  other,  which  must  not  be  found  independently. 

Although  there  may  be  some  uncertainty  of  precision  in  determining  an  angle, 
there  should  be  no  uncertainty  of  quadrant.  This  can  always  be  achieved  by  ade- 
quate choice  of  formulas.  For  example,  the  following  formulas  for  the  solution  of  a 
spherical  triangle,  in  which  two  sides  and  the  included  angle  are  given,  are  always 
adequate  if  the  sides  are  less  than  180°. 

sin  a  sin  B  =  sin  6  sin  A  —x, 
sin  a  cos  B  =  cos  b  sin  c  —  sin  b  cos  c  cos  A  =  y, 

cosa  =  cos£>cosc  +  sinfcsinccosA    -z,  (11.1-4) 
sin  a  cos  C  =  sin  b  cos  c  —  cos  b  sin  c  cos  A, 
sin  a  sin  C  =  sin  c  sin  A. 

The  check  x2  +y2  +  r  -  1  =  0  is  useful.  The  sign  of  z  determines  the  quadrant 
of  a,  and  the  signs  of  x  and  y  that  of  B\  similarly  with  C. 

In  astronomical  problems,  the  sides  and  angles  of  triangles  on  the  celestial 
sphere  may  be  of  any  magnitude,  and  it  is  undesirable  to  solve  them  by  methods 
that  restrict  the  sides  to  arcs  less  than  180°.  The  preceding  general  formulas  are 
all  valid  for  triangles  with  sides  of  any  length,  and  may  be  applied  immediately  to 
the  general  triangles  of  spherical  astronomy  without  any  restriction  to  values  less 
than  180°.  Furthermore,  to  make  the  solution  determinate,  it  is  only  necessary  to 
find  the  algebraic  sign  of  both  the  sine  and  the  cosine  of  each  arc  or  angle  that  may 
exceed  180°  to  fix  the  quadrants  in  which  they  lie.  Any  of  the  cases  of  the  general 
triangle  is  determinate  when,  in  addition  to  the  three  given  parts,  the  algebraic  sign 
of  the  cosine  of  one  of  the  required  parts  is  also  given.  In  most  practical  problems 


544 


EXPLANATORY  SUPPLEMENT 


Table  11.1.1 

Precision  of  Angle  and  Number  of  Decimals  for  Trigonometric 
Functions 


1'     =0.00029  1s      =0.00007  0.0001    =0134  =  1f4 

1"    =0.0000048  0f1     =  7x10"6  1x10-6  =  0:'2    =  Of  01 4 

0:'1  =  5x10"7  0f01  =7x10-7  1x10-7=0:'02  =0f0014 

0:'01=5x10-8  0f001=7x10-8  1  x  10-8  =  0:'002  =  0?00014 


the  conditions  of  the  problem  supply  this  sign.  In  general  triangles  the  utmost  care 
should  be  taken  to  specify  unambiguously  the  direction  of  measurement  of  angles 
and  arcs. 

Collectively,  the  preceding  formulas  are  sufficient  for  the  solution  of  the  general 
triangle  without  restriction  on  the  magnitudes  of  the  parts,  but,  in  practice,  the 
additional  formulas 

cos  A  -  —  cos  B  cos  C  +  sin  B  sin  C  cos  a, 
sin  A  cos  b  =  cos  B  sin  C  +  sin  B  cos  C  cos  a, 
sin  A  cos  c  =  sin  B  cos  C  +  cos  B  sin  C  cos  a, 
sin/l  cotB  =  sinccot^  -  cosccosA, 

sinAcotC  =  sin^cotc  —  cosfccosA,  (11.1—5) 


are  very  useful,  (Collected  formulas  are  given  in  Table  11.3.1  p.  550.) 

In  practice,  the  trigonometric  functions  of  b,  c,  and  A  are  taken  out  with  a 
number  of  decimals  depending  on  the  precision  of  the  data,  and  the  capacity  of  the 
c  alculating  machine  to  be  used.  Table  11.1.1  gives  corresponding  precisions  of  angle 
and  number  of  decimals. 

If  no  additional  work  is  involved,  it  is  clearly  advantageous  to  use  more  decimals 
than  the  precision  warrants,  since  the  effect  of  rounding-off  errors  is  then  much 
reduced.  For  instance,  seven  decimals  give  just  sufficient  coverage  for  data  known 
to  about  0'.'02  and  for  results  to  be  rounded  off  to  0'T;  but  interpolation  in  eight- 
figure  tables  at  interval  1 "  offers  little,  if  any,  more  difficulty  than  interpolation  in 
seven- figure  tables  at  interval  10",  and  eight,  decimals  can  be  used  with  little  extra 
work. 

In  the  solution  of  Equations  11.1-4  and  11.1-5,  a  is  found  either  from  cosa  =  z 
or  from  sina  =  (x2+y2)112,  whichever  is  the  smaller.  Assuming  a  is  less  than  180°,  the 
ambiguity  of  the  second  formula  is  resolved  according  to  the  sign  of  z.  B  is  found 
from 

tanB=-       or       cotfi=-,  (11.1-6) 

y  x 


11  /  COMPUTATIONAL  TECHNIQUES 


545 


Table  11.1.2 

The  Method  of  Inverse  Use 


0° 

45° 

90° 

135° 

180° 

225° 

270° 

315° 

360° 

X 

+ 

+ 

+ 

+ 

y 

+ 

+ 

+ 

+ 

+ 

tan  or  cot 

tan 

cot 

cot 

tan 

tan 

cot 

cot 

tan 

cot 

D  or  C  arg 

D 

C 

D 

C 

D 

C 

D 

C 

D 

according  to  which  ratio  is  less  than  unity.  The  quadrant  is  determined  by  the  signs 
of  x  and  y,  since,  if  a  is  less  than  180°,  sina  is  positive. 

Most  trigonometric  tables  are  arranged  semiquadrantally,  with  direct  (D)  and 
complementary  (C)  arguments.  The  Table  11.1.2  shows  the  method  of  inverse  use 
in  finding  B.  There  is  no  difficulty  in  systematic  computation. 

The  range  of  precision  of  the  inverse  determination  of  an  angle  from  its  sine  (or 
cosine)  and  tangent  (or  cotangent)  is  indicated  in  Table  11.1.3.  The  table  is  arranged 
to  show  the  range  of  angle  for  which  the  alternative  trigonometric  function  should 
be  used,  and  gives  the  error  in  the  angle  corresponding  to  an  error  of  1  x  10-6  in 
the  function. 

The  technique  of  inverse  interpolation,  referred  to  briefly  in  Section  11.23,  is  a 
powerful  tool  in  the  solution  of  transcendental  equations  and  of  equations  in  which 
the  algebraic  solution  is  complicated.  The  fundamental  principle  of  such  methods 
lies  in  the  tabulation  of  a  discriminant,  defined  so  that  it  attains  a  predetermined 
value  (usually  zero)  when  the  original  equation  is  satisfied,  and  the  calculation  of 
the  unknown  argument  corresponding  to  the  predetermined  value  of  the  discrimi- 
nant by  the  process  of  inverse  interpolation.  Although  these  methods  may  involve 
more  calculation  than  direct  methods,  they  have  two  considerable  advantages.  First, 
they  are  usually  independent  of  theoretical  developments,  of  any  approximations 
that  may  be  necessary  in  such  developments,  and  of  extrapolations.  Second,  the 


Table  11.1.3 

Range  of  Precision  of  the  Inverse  Determination  of  an  Angle 


Errors  corresponding  to 

0° 

45° 

90° 

135° 

180° 

1  x  10  6  in  function 

180° 

225° 

270° 

315° 

360° 

Use  function 

sin 

cos 

cos  sin 

Error  in  angle 

0f2 

0'.'29 

0"2 

0:'29 

0'.'2 

Use  function 

tan 

cot 

cot  tan 

Error  in  angle 

0?014 

Of  007 

Of  01 4 

Of  007 

Of  01 4 

546  EXPLANATORY  SUPPLEMENT 

correctness  of  the  calculations  and  of  the  required  answer,  and  the  precision  of  that 
answer,  are  directly  under  the  control  of  the  computer.  Illustrations  of  the  use  of 
these  methods  are  to  be  found  in  the  preceding  sections,  particularly  in  the  calcu- 
lation of  the  local  circumstances  of  eclipses  (Section  8.23)  and  the  derivation  of  the 
times  of  moonrise  and  moonset  (Section  9.3). 

The  availability  of  high-speed  computers  has  changed  the  relative  importance 
to  be  attached  to  the  various  factors  entering  into  a  computation.  It  is  no  longer 
desirable  to  restrict  the  amount  of  calculation  to  a  minimum:  many  repetitions  of 
a  simple  iteration  are  often  preferable  to  a  more  sophisticated  direct  calculation. 
In  particular,  many  of  the  transformations  of  coordinates  arising  in  astronomy  can 
be  efficiently  handled  by  the  direct  use  of  the  accurate  formulas,  instead  of  by 
approximate  series  expressions.  These  often  involve  multiplying  a  column  matrix 
representing  the  direction  cosines  by  a  transformation  matrix,  as  is  done,  for  exam- 
ple, for  the  correction  for  precession  and  nutation.  Close  attention  to  the  precision  of 
computation  is  generally  unnecessary,  since  many  extra  figures  can  be  kept  without 
any  extra  work. 

Although  such  machines  are  used  for  the  computation  of  the  data  in  The  As- 
tronomical Almanac,  they  may  not  be  generally  available  to  all  users.  The  previous 
remarks  on  the  techniques  of  computation,  therefore,  are  included  to  facilitate  cir- 
cumstances in  which  desk  calculating  machines  are  used. 

Computing  techniques  adapted  to  electronic  hand-held,  desktop,  or  larger  com- 
puters are  given  in  most  modern  texts  on  computing  (see  Hildebrand,  1987  and 
Press  et  al,  1986). 


1 1 ,2    INTERPOLATION  AND  SUBTABULATION 
1 1 .21    Introduction  and  Notation 

The  interpolation  methods  described  in  this  section,  together  with  the  accompany- 
ing tables,  are  usually  sufficient  to  interpolate  to  full  precision  the  ephemerides  in 
The  Astronomical  Almanac.  Additional  notes,  formulas  and  tables  are  given  in  the 
booklets  Interpolation  and  Allied  Tables  and  Subtabulation  and  in  many  textbooks 
on  numerical  analysis.  It  is  recommended  that  interpolated  values  of  the  Moons 
right  ascension,  declination,  and  horizontal  parallax  be  derived  from  the  daily  poly- 
nomial coefficients  that  are  provided  for  this  purpose  in  The  Astronomical  Almanac. 

The  term  fp  denotes  the  value  of  the  function  fit)  at  the  time  t  =  t0  +ph,  where 
h  is  the  interval  of  tabulation,  to  is  a  tabular  argument,  and  p  =  (t-ta)/his  known 
as  the  interpolating  factor.  The  notation  for  the  differences  of  the  tabular  values  is 
shown  in  Table  11.21.1;  it  is  derived  from  the  use  of  the  central-difference  operator 
i5,  which  is  defined  by: 

vfp  =  fp+m-fP-vi-  (11.21-D 


11  /  COMPUTATIONAL  TECHNIQUES 


547 


Table  11.21.1 

Differences  in  Tabular  Arguments 


Argument    Function  Difference 


1st 

2nd 

3rd 

4th 

f-2 

f-2 

61/2 

=/1  - 

fo 

6-312 

=  61/2 

-  fi_i/2 

f-1 

f-1 

*2-1 

*4-i 

=/1  - 

2/0+/-1 

6-i/2 

^-1,2 

=  /2- 

/1  -/o+/-1 

fo 

fo 

=  *?- 

$m 

4 

=  /2- 

3/1  +  3/0 

Ui 

n 

% 

=  sl2 

"—US 

6312 

4 

=  fz- 

4/i  +6/0-4/_i 

+  /-2 

Us 

f+2 

4 

=  h- 

3/2  +  2/,+2/c- 

3/-1  +/_2 

The  symbol  for  the  function  is  usually  omitted  in  the  notation  for  the  differences. 
Tables  are  given  for  use  with  Bessel's  interpolation  formula  for  p  in  the  range  0  to 
+1.  The  differences  may  be  expressed  in  terms  of  function  values  for  convenience  in 
the  use  of  programmable  calculators  or  computers. 

p  =  the  interpolating  factor  =  (t  —  to)  I  (?i  —  fo)  =  (f  —  fo)  /  h  (11 .21-2) 

1 1 .22   Interpolation  Formulas 

Bessel's  interpolation  formula  in  this  notation  is 

fP  =  fo  +p6vi  +  Bi{8l  +  6*)  +  B36l2  +  B^4  +1})  +  -.,  (M  -22-1) 

where 

B2=p(p-  l)/4, 
B3=p(p-l)(p-^)  /6, 

B4  =  (p+l)p(p- I)(p-2)/48.  (11.22-2) 

The  maximum  contribution  to  the  truncation  error  of  fp,  for  0  <  p  <  1,  from 
neglecting  each  order  of  difference  is  less  than  0.5  in  the  unit  of  the  end  figure  of 
the  tabular  function  if  S2  <  4,  63  <  60,  64  <  20,  and  <55  <  500. 


548  EXPLANATORY  SUPPLEMENT 

Everett's  interpolation  formula  in  this  notation  is 

fP=fo+  pSm  +  E20620  +E]S2l+E40640  +E*64l+-,  (II  .22-3) 


where  E\  =  —p(p  —  l)(p  -  2)  /  6, 

E2  =  (p+l)p(p-l)/6, 
4  =  -(p+l)p(p~l)(p-2)(p-3)l\20, 

E4  =  (p  +  2)(p+l)p(p-  l)(p-2)/120.  (11.22-4) 
LaGrange's  interpolation  formula  to  second  order  in  this  notation  is 

/>  =  /-!  Qp2-^)+/o(1-P2)  +  /i  (\p2  +  \p)-  (H.22-5) 

This  formula  has  the  advantage  that  the  interpolation  can  be  done  entirely  in  terms 
of  the  functional  values.  The  disadvantages  are  that  the  coefficients  are  required 
to  the  same  number  of  significant  figures  as  the  function,  and  that  the  number  of 
values  of  the  function  to  use  in  any  particular  case  is  not  easily  determined  without 
knowing  the  size  of  the  differences. 


1 1 .23  Inverse  Interpolation 

Inverse  interpolation  to  derive  the  interpolating  factor  p,  and  hence  the  time,  for 
which  the  function  takes  a  specified  value  fp  is  carried  out  by  successive  approxi- 
mations. The  first  estimate  p\  is  obtained  from 

P\  =  (fP  ~  fotfm-  (11.23-1) 

This  value  of  p  is  used  to  obtain  an  estimate  of  B2,  from  the  critical  table  or 
otherwise,  and  hence  an  improved  estimate  of  p  from 

p  =  Py~B2{6l  +  6])6ll2.  (11.23-2) 

This  last  step  is  repeated  until  there  is  no  further  change  in  B2  or  p;  the  effects  of 
higher-order  differences  may  be  taken  into  account  in  this  step. 

11.24  Polynomial  Representations 

It  is  sometimes  convenient  to  construct  a  simple  polynomial  representation  in  the 
form 

fp  =  a0  +  a1p  +  a2p2  +  a3ps  +  a4p4  +  ■•• ,  (II  .24-1 ) 


11  /  COMPUTATIONAL  TECHNIQUES 

which  may  be  evaluated  in  the  nested  form 


549 


fp  =  (((a4p  +  ai)p  +  ai)p  +  ai)p  +  ao  (1 1.24-2) 

Expressions  for  the  coefficients  a0>  <J|>  etc.,  may  be  obtained  from  Stirling's  inter- 
polation formula,  neglecting  fifth-order  differences: 

ao  =  fo, 

a\  =  0m  +6-1/2)/ 2  -03, 

a2  =  &lll-aA,  (11.24-3) 
a3  =  (6l2  +  6ll/2)/l2, 
a4  =  6AQl  24. 

This  is  suitable  for  use  in  the  range  -1  /  2  <  p  <  +1  /  2,  and  it  may  be  adequate 
in  the  range  —2<p<2,  but  it  should  not  normally  be  used  outside  this  range. 
Techniques  are  available  in  the  literature  for  obtaining  polynomial  representation 
that  give  smaller  errors  over  similar  or  larger  intervals.  The  coefficients  may  be 
expressed  in  terms  of  function  values  rather  than  differences. 

Economized  polynomials,  such  as  Chebyshev,  provide  efficient  and  accurate 
expressions  that  may  be  easily  evaluated  with  a  small  computer.  The  coefficients  a, 
of  the  Chebyshev  expansion 

n 

f*=  f  +  X^'W  (11.24-4) 
1=1 

are  computed  for  prescribed  time  spans,  where  fx  is  the  function  represented,  T/(x)  is 
the  Chebyshev  polynomial  of  the  /-th  degree,  and  x  is  the  normalized  time  variable. 
To  evaluate  a  Chebyshev  expansion,  it  is  necessary  to  normalize  the  time  variable 
on  the  interval  for  which  the  series  is  valid.  Attempts  to  use  these  series  beyond 
the  specified  time  intervals  for  which  they  are  valid  will  produce  erroneous  results. 
An  application  of  Chebyshev  polynomials  may  be  found  in  Section  5.5.  Further 
information  is  given  in  Lanczos  (1956)  and  Fox  and  Parker  (1972). 

1 1 .3    PLANE  AND  SPHERICAL  TRIGONOMETRY 

In  astronomical  problems,  the  sides  and  angles  of  triangles  on  the  celestial  sphere 
may  be  of  any  magnitude,  and  it  is  undesirable  to  solve  them  by  methods  that 
restrict  the  sides  to  arcs  less  than  180°.  The  general  formulas  given  in  Table  11.3.1 
are  valid  for  triangles  with  sides  of  any  length,  and  may  be  applied  immediately  to 


Table  11.3.1 

Formulas  for  Plane  and  Spherical  Triangles 

(The  angles  of  the  triangle  are  denoted  by  A,  B,  C;  the  opposite  sides,  by  a,  b,  c.  Other  formulas  may 
be  obtained  by  cyclic  changes  of  A,  8,  C  and  a,  b,  c.) 


Plane  Triangle  Spherical  Triangle 


a  sin  B  = 

bsin  A 

sin  a  sin  8  = 

sin  b  sin  /4 

c  -  b  cos  ,4 

sin  a  cos  8  = 

a2  = 

b2  +  C2  -  2  be  cos  A                  cosa  = 

cos  b  cos  c  +  si  n  b  si  n  c  cos  /4 

flfrtc  C  — 
a  t>w  w  — 

b  -  ccos  A 

sin  a  cos  C  = 

sin  b  cos  c  —  cos  b  sin  c  cos  .4 

a  sin  C  = 

csin  A 

sin  a  sin  C  = 

sin  csin  A 

sjn  1(8  +  C)  = 

cos  \  A 

cos  la  sin  |(B  +  C)  = 

cos  |/4cos  g{b  —  c) 

cos  1(8+  C)  = 

sin  1/4 

cos  5 acos  ^(8+  C)  = 

sin  A  A  cos  i(to  +  c) 

asinl(B-  C)  = 

(b  —  c)  cos  1/4 

sin  ^asin  5(6  -  C)  = 

cos  ^  Asin  l(b  -  c) 

acos  1(8  -  C)  = 

(b  +  c)sin  1/4 

sinlacosl(8-  C)  = 

sin  1/4 sin  |(b+  c) 

s  = 

(a+b+c) 

s  = 

\{a  +  b  +  c) 

r2  = 

(s  -  a)(-b)(s  - 

c)  /  s                     m2  = 

sin(s  -  a)  sin(s  -  b)  sin(s  -  c)  sin  s 

Area  = 

sr  =  |bc sin  A 

Area  = 

A  +  B+  C-  180° 

tocsin2  lyA  = 

(s-b)(s-c) 

sin  bsin  csin2  \  A  = 

sin(s  -  b)sin(s  -  c) 

be  cos2  j/4  = 

s(s  -  a) 

sinbsinccos2  1/4  = 

sin  ssin(s  —  a) 

tan  \A  = 

r/(s-  a) 

tan  1/4  = 

m  /  sin(s  —  a) 

Additional  Formulas  Right-angled  Triangle:  A  =  90° 


sin  A  sin  b  = 

sin  Ssina 

sin  a  sin  8  = 

sin  b 

sin  acos  8  = 

cos  b  sin  c 

cos  a  = 

cos  b  cos  c 

sin  acos  C  = 

sin  bcos  c 

sin  A  sin  c  = 

sin  Csin  a 

sin  a  sin  C  = 

sin  c 

cos  a  cos  8  = 

sin  a  cot  c  -  sin  Scot  C 

sin  B  cos  a  = 

cos  bcos  C 

cos  acos  C  = 

sin  a  cot  b  -  sin  Ccot  8 

cos  8  = 

cos  b  sin  C 

cos  b  cos  ,4  = 

sin  b  cot  c  —  sin  A  cot  C 

sin  8  cos  c  = 

cos  C 

cose  cos  A  - 

sine  cot  b  -  sin  A  cot  8 

sin  8  sin  c  = 

sin  bsin  C 

S  = 

1(A  +  S+  C) 

tana  = 

tan  b  sec  C 

= 

-  cos(S  -  A)  cos(S  -  8)  cos(S  -  C)  1  cos  S 

tana  = 

tan  c  sec  8 

sin  B  sin  Csin2  4a  = 

-  cos  Scos(S  -  A) 

cos  a  = 

cot  B  cot  C 

sin  8  sin  ccos2  \  a  = 

cos(S-  B)cos(S-  C) 

tan  b  = 

sin  ctan  B 

tan  |a  = 

cos(S-  A)  /  M 

tan  c  = 

sin  btan  C 

11  /  COMPUTATIONAL  TECHNIQUES 


551 


Table  11.3.1,  continued 

Formulas  for  Plane  and  Spherical  Triangles 


Quadrantal  Triangle:  a  -  90° 


sinAsinb  =  sinS  sin  bsin  A  =  sin  B  tan  A  = -tan  Ssecc 

sin  Acos  b  =  cos  Bsin  C  sin  bcos  A= -cosBcosc  tan  A  = -tan  Csecb 

cosA  =  —  cos  Bcos  C  cosb  =  cosBsinc  cosA  = -cotbeote 

sin  A  cose  =  sin  Bcos  C  sin  b  cos  C  =  cos  c  tan  8  =  sin  Ctan  b 

sin  Asin  c  =  sin  C  sin  b sin  C  =  sin  Bsin  c  tan  c  =  sin  Btan  c 


Spherical  Triangle  in  Which  b  is  Small 

a  -  c  =  -bcos  A+  It^cotcsin2  A  +  -■• 
Bsin  C  =  +bA+  \  t£  cote  sin  2A  +  •■■ 
180°  -  C  —  A  =  +bcot  csin  A  +  1^(1  +  2  cot2  c)  sin  2A  +  ■•■ 


the  general  triangles  of  spherical  astronomy  without  any  restriction  to  values  less 
than  180°.  Furthermore,  to  make  the  solution  determinate,  it  is  only  necessary  to 
find  the  algebraic  sign  of  both  the  sine  and  the  cosine  of  each  arc  or  angle  that  may 
exceed  180°,  to  fix  the  quadrants  in  which  they  lie.  Any  of  the  cases  of  the  general 
triangle  is  determinate  when,  in  addition  to  the  three  given  parts,  the  algebraic  sign 
of  the  sine  or  the  cosine  of  one  of  the  required  parts  is  also  given.  In  most  practical 
problems  it  happens  that  the  conditions  of  the  problem  supply  this  sign.  In  general 
triangles  the  utmost  care  should  be  taken  to  specify  unambiguously  the  direction 
of  measurement  of  angles  and  arcs. 


552  EXPLANATORY  SUPPLEMENT 

In  Figure  11.3.1  the  arc  P'P  subtends  the  small  angle  b,  measured  in  radians, 
r  is  the  radius  and  P'R  is  perpendicular  to  OP  at  R.  The  radius  of  the  circle  times 
the  angle  subtended  in  radians  equals  the  arc  length,  hence  rxb  =  P'P. 

When  b  is  small  enough  that  P'R  approximates  P'P  then  sinb  =  P'R  /  r  and 
b  =  P'P  I  r.  Thus,  sinfc  =  b  and  tanfc  =  b.  If  in  the  small  angle  of  b  radians  there  are 
q  minutes  of  arc  {q1),  then  s'mq'  =  qsin  l". 


1 1 .4    MATRIX  AND  VECTOR  TECHNIQUES 


1 1 .41    Rotation  of  Axes  Using  Matrices 


In  practical  computations  it  is  often  necessary  to  change  the  orientation  of  reference 
frames.  Given  a  right-handed  system  of  rectangular  coordinates  x,  y,  z,  and  rotating 
the  system  positively  through  the  angle  i  about  the  x-axis,  the  new  coordinates  x' , 
Z1  are  related  to  the  original  coordinates  by 


X  =y, 

y  =  ycos/  +  zsin/, 
z  =  —y  sin  /  +  z  cos  i. 

In  matrix  notation  this  becomes  (x',y',z')  =  (x,y,z)P(i),  where 


(11.41-1) 


P(i)  = 


10  0 

0  cos  /  —  sin  / 
0    sin  /     cos  / 


(I  1.41-2) 


Similarly,  for  a  positive  rotation  j  about  the  y-axis,  (x',y',z')  =  (x,y,z)Q(j),  where 


Q(j)  = 


cos  j     0    sin  j 

0       1  0 
-  sin  y    0    cos  j 


(11.41-3) 


Again,  for  a  positive  rotation  k  about  the  z-axis,  (x'./.z')  =  (x,y,z)R(k),  where 


R(k)  = 


cos  k    —  sin  k  0 
sin*     cosk  0 
0         0  1 


(11.41-4) 


The  equation  for  two  positive  rotations  may  be  written  as 


{x',y!,z')  =  (x,y,z)P{i)Qij), 


(11.41-5) 


11  /  COMPUTATIONAL  TECHNIQUES 

where  the  matrix  product  is 


553 


P(')Q(J)  = 


cosy 
sin  i  sin  j 
—  cos  /'  sin 


0  sin  j 

cos/  —  sin  /'cosy 
sin  /     cos  i  cos  / 


(11.41-6) 


For  three  successive  positive  rotations  (j),  (/),  (k)  about  the  jc-,  y-,  and  z-axes 
respectively,  (x',y',z')  =  (x,y,z)P(i)Q(J)R(k),  and  the  matrix  product  is 


cosy  cosk  -  cos y  sin k  siny 

P(0Q(j)R(k)  -     sin  i  siny  cos  k  +  cos  i  sin  k     -  sin  i  sin  j  sin  k  +  cos  i  cos  k    -  sin  i  cosy 
_--  cos  i  siny  cos  k  +  sin  /sin*     cos  /siny  sin  k  +  sin  /cos  k      cos /cosy 

(11.41-7) 

This  case  comprises  a  rotation  (/)  about  the  x-axis,  a  rotation  (j)  around  the 
new  position  of  the  y-axis,  and  a  rotation  (k)  around  the  final  position  of  the  z-axis. 

The  matrix  denoting  any  number  of  rotations  can  be  derived  by  multiplication 
following  the  precepts  below. 

Two  matrices  A  and  B  form  the  product  AB,  where  the  superscript  indicates 
the  row  and  the  subscript  indicates  the  column, 


A  = 


r 

a\ 

-b\ 

b\ 

*il 

4 

B  = 

b\ 

H 

4 

°i  - 

A 

b\ 

H. 

(U.41-8) 


AB  = 


■a\b\+a\b2x+a\b\  a\b\+  a\b\  +  a\b\  a\b\  +  a\b\  +  a\b\ 
a]b\  +  a\b]  +  a\b]  a\b[  +  a\b\  +  a]b\  a\b\  +  a\b\  +  a\b] 
a\b\  +  a\b\  +  a\b\    a]b\  +  a\b\  +  a\b\    M  +  <M  +  a\b\ 


•2"\ 


J3WI 


'I  "2 


2u2  ■ 


*3"2 


'1"3 


(11.41-9) 


1 1 .42   Spherical  Coordinates  Using  Vectors 

Consider  a  triangle  ABC  (Figure  11.1.1)  scribed  on  the  surface  of  a  sphere  of  unit 
radius  whose  center  is  denoted  by  O.  Each  side  abc  is  a  portion  of  a  great  circle 
defined  by  BOC  =  a,  AOC  =  b,  and  AOB  =  c. 

A  is  the  angle  between  the  planes  BOA  and  COA,  B  is  the  angle  between  the 
planes  AOB  and  COB,  and  C  is  the  angle  between  planes  AOC  and  BOC. 

Take  I,  m,  n.  as  nonorthogonal  unit  vectors  along  OA,  OB,  and  OC  respectively. 
The  cross  product  1  x  m  is  a  vector  of  magnitude  sin  c  directed  ort  hogonally  to  the 
plane  AOB.  In  the  same  manner,  the  cross  product  1  x  n  is  a  vector  of  magnitude 
sinb  orthogonal  to  AOC.  A  is  the  angle  between  these  two  vectors. 


554 

The  dot  product  of  these  two  vectors  is 


EXPLANATORY  SUPPLEMENT 


(1  x  m)  ■  (1  x  n)  =  sincsinfccosA 
=  1  •  [m  x  (I  x  n>] 
=  1  [I(m  ii)    n(l  m)| 
=  (m  -  n)  -  (1  •  n)(l  ■  m) 

=  cos  a  -  cos  b  cos  c,  (11.42-1) 

which  gives 

cosa  -  cosi?cosc  +  sinbsinccosA.  (11.42-2) 

Similar  equations  for  cosb  and  cose  are  easily  obtained. 
From  the  definition  of  the  vector  product,  we  find 

,     |(1  x  m)  x  (1  x  n) 
sinA  = 


I  x  m|  |1  x  n| 

-l[m,  l,n]  +  m[l,l,n] 

sin  b  sine 
0,  m,  n] 


sin  b  sin  c 

Thus, 


sin  A     sin/?  sinC 


sin  a     sin£>  sine 


(11.42-3) 


(11.42^4) 


Other  formulas  of  spherical  trigonometry  (see  Table  11.3.1)  may  be  obtained 
from  the  two  above. 

Another  application  of  vectors  to  the  solution  of  a  problem  in  spherical  trigonom- 
etry concerns  transforming  the  coordinates  of  a  star  from  right  ascension  (a)  and 
declination  (6)  to  ecliptic  longitude  (A)  and  latitude  (j3). 

Given  the  triangle  EQS  (Figure  11.42.1)  on  a  sphere  of  unit  radius  with  center 
at  O,  Q  is  the  pole  of  the  celestial  equator,  E  is  the  pole  of  the  ecliptic,  and  S  is  the 
star. 

The  side  EQ  is  the  obliquity  of  the  ecliptic  (e),  the  side  QS  is  90°  -  <5,  and  the 
side  ES  is  90°  -0.  Two  great  circles  passing  through  E  and  Q,  each  being  orthogonal 
to  side  ES,  intersect  the  equator  and  ecliptic  planes  at  the  vernal  equinox.  Then  the 
angle  EQS  =  90°  +  q,  and  the  angle  SEQ  =  90°  -  A. 

Using  these  quantities  the  problem  is  easily  solved  by  the  equations  previously 
derived: 

sin  0  =  sin  6  cos  e  —  cos  <5  sin  a  sin  e, 
cos  0  cos  A  =  cos  b  cos  Q, 

cos  0  sin  A  =  sin  6  sin  e  +  cos  6  sin  a  cos  e.  (11 .42-5) 


11  /  COMPUTATIONAL  TECHNIQUES 


555 


Q 


s 

Figure  11.42.1 

Triangle  on  unit  sphere 


The  problem  can  also  be  solved  by  the  use  of  vectors.  Assume  axes  I.  m,  n 
(forming  the  conventional  right-handed  triad)  with  1  pointing  to  the  vernal  equinox 
and  n  directed  toward  the  north  pole  of  the  equator  (Q).  Also  assume  the  right- 
handed  triad  u,  v,  w  with  u  directed  to  the  vernal  equinox  and  w  toward  the  pole 
of  the  ecliptic  (£). 

Then 

u  =  l 

v  =  m  cos  e  -  n  sin  e 

w  =  m  sin  e  +  n  cos  f .  (11 .42-6) 

The  components  of  OS  projected  onto  the  equatorial  and  ecliptic  axes  are 

cos  6  cos  ct,  cos  b  sin  ct,  sin  6, 
cos  0 cos  A,    cos  0  sin  A  sin/3, 

leading  to  the  original  trigonometric  equations. 
1 1 .43   Specific  Coordinate  Transformations 

For  geocentric  spherical  coordinates  there  are  thus  the  four  practical  reference  sys- 
tems of: 


556  EXPLANATORY  SUPPLEMENT 

(1)  Azimuth  (A)  is  measured  from  the  north  through  east  in  the  plane  of  the 
horizon,  and  altitude  (a)  measured  perpendicular  to  the  horizon.  In  as- 
tronomy, the  zenith  distance  (z  -  90°  —  a)  is  more  generally  used,  but  the 
altitude  is  retained  in  the  formulas  for  reasons  of  symmetry. 

(2)  Hour  angle  (h)  is  measured  westward  in  the  plane  of  the  equator  from  the 
meridian,  and  declination  (6)  is  measured  perpendicular  to  the  equator, 
positive  to  the  north. 

(3)  Right  ascension  (a)  is  measured  from  the  equinox  eastward  in  the  plane  of 
the  equator,  and  declination  (<5)  is  measured  perpendicular  to  the  equator, 
positive  to  the  north. 

(4)  Longitude  (A)  is  measured  from  the  equinox  eastward  in  the  plane  of  the 
ecliptic,  and  latitude  {(3)  is  measured  perpendicular  to  the  ecliptic,  positive 
to  the  north. 


Formulas  for  transforming  equatorial  right  ascension  and  declination  to  ecliptic 
longitude  and  latitude  may  be  written  using  direction  cosines  (unit  vectors)  and 
(rotation  matrices)  as  follows: 


"  cos  (i  cos  A " 

"1 

0         0  " 

cos  8  cos  a ' 

cos  0  sin  A 

0 

cos  t     sin  e 

cos  8  sin  a 

(11.43-1) 

sin/3 

.0 

—  sin  e    cos  e 

sin  6 

The  inverse  transformation,  using  [Re]  to  denote  the  rotation  matrix,  is 


'cos  (3 cos  A" 

"cos<5  cos  q" 

cos  (3  sin  A 

=  [R,rl 

cos  6  sin  a 

sin  j3 

sin  8 

The  transformations  correspond  to  simple  rotations  about  the  jc-axis  through 
e,  which  is  the  obliquity  of  the  ecliptic  corresponding  to  the  particular  equator  and 
ecliptic  used. 

Transformation  from  right  ascension/declination  to  local  hour  angle/declination 
may  be  carried  out  by  substitution  of 


h  —  local  sidereal  time  —  a. 


The  two  systems  are  identical  apart  from  the  origin  and  direction  angular  mea- 
surement. The  transformation  may  also  be  considered  as  a  rotation  about  the  axis 
perpendicular  to  the  equatorial  plane  and  positive  in  the  direction  of  the  North 
Pole.  Thus, 


cos  6  cos  h ' 

costs     sin  ;,s 

0" 

cos  8  cos  a. 

cos  8  sin  h 

—  sin  fj    cos  tg 

0 

cos  8  sin  a 

(11.43-3) 

sin  6 

0  0 

1 

sin  5 

11  /  COMPUTATIONAL  TECHNIQUES  557 

where  tf  is  the  local  sidereal  time. 

Transformation  of  local  hour  angle/declination  to  azimuth/altitude  involves  a 
rotation  of  the  reference  frame  through  an  angle  90°  —  <j>  in  the  plane  of  the.  meridian, 
where  4>  is  the  geocentric  latitude,  followed  by  a  rotation  about  the  new  vertical  by 
180°.  Thus, 


"cos  a  cos  A " 

cos  a  sin  A 

sin  a 

-1  0  0 
0-10 
0      0  1 


sin  (j)    0    -  cos  4 

0      1  0 
cos  tfi    0     sin  4> 


cos  6  cos  h " 
cos  6  sin  h 
sin  6 


(11.43-4) 


In  this  transformation  the  diagonal  matrix  is  its  own  inverse  and,  if  [R^]  denotes 
the  rotation  in  the  meridian  plane  with  inverse,  then 


simp     0    cos  i 
0        1  0 
—  cos  d>    0    sin  t 


(11.43-5) 


and 


"cos 8  cos h 
cos  6  sin  h 
sin  (•■ 


-1  0 
0  -1 
0  0 


cos  a  cos  A ' 
cos  a  sin  A 
sin  a 


(11.43-6) 


The  corresponding  equatorial  rectangular  coordinates  and  distance  are  denoted 
by  X,  Y,  Z,  and  R  for  the  Sun  and  by  £,  rj,  (,  and  A  for  the  planets;  they  are  derived 
from  the  spherical  coordinates  by  the  formulas: 

x  t  x 

—  or    —  =  cos  o  cos  a, 

R  A 

Y  7?  *  - 

—  or    —  =  cos  o  sin  a, 

R  A 

—  or  ^=sin6.  (11.43-7) 
R  A 


Geocentric  ecliptic  rectangular  coordinates  are  rarely  (if  ever)  used. 

For  heliocentric  coordinates  there  are  only  the  two  practical  reference  systems 
the  equatorial  and  the  ecliptic.  In  the  equatorial  system  only  rectangular  coor- 
dinates are  used.  The  relationships  between  the  ecliptic  rectangular  coordinates 
(Xc,yc,Zc),  the  ecliptic  longitude,  latitude,  and  distance  (l,b,r),  and  the  equatorial 
rectangular  coordinates  (x,y,  z)  are 


-    r  cos  b  cos  I 

X 

yc  - 

-    r  cos  b  sin/ 

=  m 

y 

.Zc  - 

=       r  sin  b 

_z_ 

558 


EXPLANATORY  SUPPLEMENT 


.V 

'xc~ 

(11.43-9) 


The  conversion  from  heliocentric  to  geocentric  coordinates  is  performed  in  terms 
of  equatorial  rectangular  coordinates  using 


ri  =  v  +  Y, 


(11.43-10) 


where  X,  Y,  Z  are  the  geocentric  coordinates  of  the  Sun. 

The  calculation  of  the  spherical  coordinates  from  the  rectangular  coordinates, 
or  from  the  known  direction  cosines,  typified  by 


A  cos  6  cos  a  =  £, 
A  cos  6  sin  a  =  i], 
A  sin  6  =  C> 


(11.43-11) 


is  performed  by 

tan  a  =  rj  I  £, 

zi  =  (f2  +  /r  +  C2), 

cot  a  =  £  /  jj, 

sin<5  =  C/A  (11.43-12) 


The  quadrant  of  a  is  determined  by  the 
of  £.  Zi  and  Zlcos<5  are  always  positive, 
as 

q  =  tan-1    /  £, 
=  cot"1 

5  =  sin"'C/A 


igns  of  £  and  r?,  and  that,  of  6  by  the  sign 
rhe  formulas  for  a  and  6  may  be  written 

or  arctan;j/£, 
or  arccot  £  /  //. 

or  arcsinC/A  (11.43-13) 


provided  that  the  appropriate  values,  and  not  necessarily  the  principal  values,  of 
the  multivalued  functions  are  taken. 

Many  of  the  conversions  above  correspond  to  a  simple  rotation  of  the  frame  of 
reference  about  one  of  its  axes.  These  are  special  cases  of  the  general  conversion 


11  I  COMPUTATIONAL  TECHNIQUES  559 

from  a  set  of  axes  designated  by  x,  %  z  to  a  set  designated  by  x1,  /,  z'.  The  two 
systems  are  connected  by  the  formulas 

x  =  l]x'  +  i2y'  +  hz',  x'  =  lix  +  miy  +  niz, 

y  =  m\xl  +  m2y'  +  m^z' ,       y'  =  l2x  +  m2y  +  n2z, 
z  =  n\x'  +n2y'  +  mz',         z'  =  I3X  +  m3y  +  n3z,  (11.43-14) 

where  l\,m\,n\\  l2,  m2,  n2;  and  I3,  m3,  /13  are  the  direction  cosines  of  x' ,  y',  z'  referred 
to  the  system  x,  y,  z.  The  direction  cosines  satisfy  the  relations  typified  by 

l\  +  m\  +  n\  =  1 , 
l2h  +  m2mi  +  n2ni  =  0, 
1}  +    +    =  I, 
tftiB]  +  m2n2  +m3«3  =  0.  (11.43-15) 

These  nine  quantities  can  be  expressed  in  terms  of  the  Eulerian  angles  9,  <p,  tp 

as 

1 1  =  +  cos  4>  cos  9  cos  i>  -  sin  <j>  sin  ip, 

h  =  —  cos  <p  cos  f?  sin  i/j  —  sin  0  cos  ip, 

=  +  cos  <p  sin  9, 
m\  =  +  sin  <p  cos  9  cos  tp  +  cos  4>  sin  tp, 
m2  =  -  sin  <p  cos  9  sin  rp  +  cos  <p  cos  rp, 
W3  =  +  sin  <p  sin  9, 
«i  =  —  sin  #  cos 
n2  =  +  sin  9  sin  xp, 

n3=+cos0.  (11.43-16) 

In  this  case  the  conversion  corresponds  to  a  rotation  cp  about  the  z-axis,  9  about 
the  new  position  of  the  y-axis,  and  ip  about  the  new  (and  final)  position  of  the  z- 
axis.  The  transformation  is  equivalent  to  a  single  rotation  about  some  line  not  in 
general  coincident  with  one  of  the  axes;  but  such  single  rotations  are  not  frequently 
encountered  in  astronomical  practice. 


560 

11.5    NUMERICAL  CALCULUS 


EXPLANATORY  SUPPLEMENT 


11.51    Numerical  Differentiation 

Successive  derivatives  of  a  function  are  closely  related  to  the  successive  orders  of 
differences.  Thus  to  obtain  the  exact  expression  for  the  derivatives  in  terms  of 
differences  it  is  necessary  merely  to  differentiate  any  of  the  interpolation  formulas 
(see  Section  11.2)  as  many  times  as  required. 

Differentiation  of  Bessel's  interpolation  formula  leads  to 

hfp  =  6y2+l-  (p-^j(620  + 6^+^(1  -6p  +  6P2)8l1  +  :.,  (11.51-1) 

where  f'p  denotes  the  value  of  df  I  dt  at  the  point  t  =  to  +  ph. 

This  formula  is  intended  for  use  in  the  range  0  <  p  <  1;  the  maximum  value  of 
the  third-difference  coefficient  is  1/12  and  occurs  at  p  =  0  and  1.  At  p  =  1/2  the 
formula  reduces  to 

hfm  =  6l/2  -  ^S\a  +  ^65m  -  - .  (1 1.51-2) 

Differentiation  of  Stirling's  interpolation  formula  leads  to 

hfp  =  v60+p6t- g(l -3p2)»6l  +  -,  (11.51-3) 

where,  for  example,  p,6^  =  j(^^,/2  +  5f/2).  This  formula  is  intended  for  use  in  the 
range  —l/2<p<  1/2;  the  maximum  value  of  the  coefficient  of  the  mean  third 
difference  is  1  /  6  and  occurs  at  p  -  0.  At  p  =  0  the  formula  reduces  to 

hf0  =  p6o  -  pi&l  +  ~n65Q  - (11.51-4) 

The  condition  for  a  maximum  or  minimum  is  that  f'p  =  0.  For  Stirling's  formula 
this  condition  may  be  expressed  as: 

pa-^+i(i-y^-.  (]]51_5) 

This  equation  must  normally  be  solved  by  successive  approximations.  The  maxi- 
mum contribution  from  the  third  difference  is  1  /  6  p.6\  I  6%,  and  if  this  is  negligible 
p  may  be  evaluated  directly  from 

p.-Ufc/jg*-!  -6-1/2/4  (11.51-6) 


11  /  COMPUTATIONAL  TECHNIQUES 


561 


Table  11.51.1 

Derivatives  to  an  Order  of  10 


Derivatives  at  a  Tabular  Point  Derivatives  at  a  Halfway  Point 


=  f  *0 

~g"*0 

+                  -  - 

M'V2 

=  *1/2 

1  *3 
_  53*1/2 

+ 

3  *5 
535  *1/2 

='o2 

1  X* 
-  T5*0 

.4.    1  A6 

+  50*0   

■  M*?/2 

-  S?M*1/2 

+ 

5760^*1/2  - 

-1^1 

+  TSJ'^O   

"  *1/2 

_  5*1/2 

+ 

37  ,-7 

T920*1/2  - 

6*0 

+  535*0 

=  ^s1/2 

53^*1/2 

=  M«f 

-  w 

"  *1/2 

53*1/2 

+ 

47  <9 
1152*1/2  ~ 

-  *0 

-H 

.   13  i10 

+  535*0  ' 

"  J 1/2 

=  V-l>%2 

+ 

209  ,.c10 
1555^*1/2  - 

*7/S" 

-  M 

h7fvil 

=  *~1/2 

+ 

133  c11 
1920*1/2  ~~ 

»8/q™ 

3*0 

4.    31  A12 

+  555*0   

=  rf'a 

11  „/,10 

+ 

5760*'*1/2 

=  W 

1  i.Jt11 

+  •■■ 

-4 

3  ,11 
_  5*1/2 

+ 

=c 

12*0 

+  ••■ 

"1X 

13  „i12 

+ 

In  astronomical  usage,  the  terms  variation  and  motion  are  synonymous  with 
"derivative  with  respect  to  time,"  when  qualified  by  an  adjective  defining  the  unit 
of  time,  and  are  usually  evaluated  for  the  tabular  points.  The  term  secular  variation 
usually  implies  a  second  derivative  with  respect  to  time. 

The  second  derivative  fp  is  obtained  by  differentiating  the  formulas  for  f  for 
Stirling's  formula  this  leads  to 

h1f'p  =  6l+pn6l  +  -,  (11.51-7) 

and,  when  p  =  0,  to 

h2f;  =  S20-^0  +  ^660--.  (11.51-8) 

In  terms  of  central  differences,  the  derivatives  to  order  10  at  the  tabular  point 
and  at  the  half-way  point  are  listed  in  Table  11.51.1.  Primes  are  used  to  denote 
differentiation  with  respect  to  x.  For  example, 

h2fp  =  h2  £j/(.*„  +  ph)  =  ^fp.  ( 1 1 .5 1-9) 

For  higher  derivatives  the  primes  are  replaced  by  italicized  roman  numerals.  In 
general  formulas,  fptt)  is  used  to  denote  the  «th  derivative  of  /  with  respect  to  x  at 
the  point  Xo+ph. 


562  EXPLANATORY  SUPPLEMENT 

The  formulas  in  Table  11.51.1  may  also  be  written  by  substituting  for  the  dif- 
ferences their  values  in  terms  of  the  function.  Additional  expressions  for  derivatives 
in  terms  of  the  functional  values  are  as  follows: 

hfQ  =  \(j\  -/-,)- ^3/o  +  - 

-  —  C-/2  +  8/,  -  8/_,  +  f-2)  +  ^65fo  ~  - 
=  ^(/.i  -  9/2+45/,  -  45/_j  +9/_2  -  f-3)  -  7^7o  +  - 
*2/o  =  C/i  -  2/o  +/-])-  ^<54/o  +  - 

=  ~{-h  +  16/i  -  30/o  +  16/--,  -  f-2)  +  ^6/o  -  - 

=  ^(2/3  -  27/3  +  270/,  -  490/c  +  270/_,  -  27/_2  +  2/_3)  -  ^58/o  +  - 

&/w  =  Cfi  -h)-~63fl/2  +  - 

=  +  27/,  -  27/0  +  /-,)+  jj^/ia  -  - 

24  640 

=  i^q(9/3  -  125/2  +  2250/,  -  2250/o  +  125/_,  -  9/_2)  -  ^S7fV2  +  - 

t>2fm  =        ~  fi  ~  fa  +/-.)  -  J^Vi/2  +  - 

1  259  * 

=  4^(-5/3  +  39/2  -  34/,  -  34/0  +  39/_,  -  5/_2)  +  ^M6/i/i 

(11.51-10) 

For  further  formulas  see  the  Interpolation  and  Allied  Tables  and  the  Handbook 
of  Mathematical  Functions. 


1 1 .52   Numerical  Integration 

When  studying  motions  within  the  solar  system  it  is  necessary  to  use  the  solution 
of  ordinary  differential  equations  of  the  second  order.  This  normally  involves  the 
simultaneous  integration  of  three  second-order  differential  equations  to  produce  an 
ephemeris  in  rectangular  coordinates  of  a  planet,  comet,  or  satellite  with  time  as 
the  independent  argument. 

In  numerical  differentiation,  the  derivatives  of  a  function  are  expressed  in  terms 
of  the  differences.  In  numerical  integration,  the  opposite  method  is  used.  Derivatives 
of  some  function  are  computed  and  checked  by  differencing,  to  form  a  table  of  /, 
8,  6  ,  £3,  S4,  and  so  on.  In  the  simplest  case,  where  the  values  of  the  function  to  be 
integrated  can  be  calculated  in  advance,  it  is  possible  to  compute  a  starting  value 


11  /  COMPUTATIONAL  TECHNIQUES 


563 


of  the  first  summation  /'  and  to  extend  the  table  in  either  direction  by  applying 
successive  values  of  /.  For  a  double  integration,  a  starting  value  for  /"  must  be 
evaluated  and  successive  values  of  /'  applied.  Expressions  to  evaluate  the  first  and 
second  integrals  are  derived  by  integrating  an  interpolation  formula,  for  example, 


f(x)  dx  =  co 


f(x)dx1  =  u? 


Ml 


/o  +  i2^° 


17 

5760 

1 


'1/2 


367 
967680 


Jl/2 


240 


31 


60480 


(11.52-1) 


Additional  formulas  are  given  in  Interpolation  and  Allied  Tables  and  in  Handbook 
of  Mathematical  Functions. 

In  the  integration  of  orbits  the  problem  is  more  complicated  because  the  func- 
tion that  is  to  be  integrated  is  undetermined  until  the  integral  becomes  known.  Thus 
it  is  necessary  to  proceed  stepwise  using  extrapolation  and  approximation  at  each 
step.  Because  of  the  availability  of  computing  machines,  as  well  as  the  rectangular 
coordinates  of  the  principal  planets,  two  methods  for  the  numerical  integration  of 
the  orbits  have  proved  useful,  Cowell's  and  Encke's. 

When  one  is  utilizing  Cowell's  approach,  the  equations  of  motion  are  integrated 
to  give  directly  the  positions  of  the  perturbed  body  in  rectangular  coordinates.  For 
a  planet  or  comet,  the  origin  usually  is  the  Sun  and  at  each  step  the  attractions  of 
the  perturbing  bodies  would  be  added  to  that  of  the  Sun. 

With  Cowell's  method,  however,  the  origin  may  be  any  perturbing  body,  or  even 
a  double  star,  since  no  use  is  made  of  a  conic  section  as  the  first  approximation.  The 
single  condition  is  that  the  motions  of  all  perturbing  bodies  relative  to  the  selected 
origin  should  be  known.  A  disadvantage  of  Cowell's  method  is  that  the  integrals 
comprise  numerous  significant  figures  that  vary  extensively  with  time.  Thus,  the 
integration  tables  are  prone  to  converge  rather  slowly,  which  may  require  the  use 
of  a  short  step  interval.  The  basic  equations  in  the  Cowell  approach  are 


with  similar  equations  in  y  and  z.  The  masses  are  expressed  in  terms  of  the  mass  ot 
the  Sun,  k  equals  the  Gaussian  constant,  m  is  the  mass  of  the  perturbed  body,  and 
mi  the  masses  of  the  perturbing  bodies.  The  first  term  is  the  attraction  of  the  Sun 
on  m,  and  the  first  term  in  parentheses  is  the  attraction  of  irtj  on  m.  The  last  term 
in  parentheses  is  the  action  of  the  perturbing  bodies  on  the  Sun. 


564  EXPLANATORY  SUPPLEMENT 

In  Encke's  method  the  unperturbed  orbit  of  the  mass  m  about  the  Sun  is 
assumed  known.  Hence  only  the  difference  between  the  unperturbed  position  and 
the  perturbed  position  needs  to  be  determined.  The  equations  may  be  written 

*~*>-t'*0        (I  -  -|)*E*S  ( ^  -  |)  '  (H.52-3) 

with  similar  equations  for  77  and  £  These  equations  could  be  integrated  directly, 
but  since  f  is  small,  many  figures  would  have  to  be  carried  in  the  term  (xq/ r^-xl V3) 
to  retain  significance  in  the  difference.  On  the  assumption  that  f,  n  and  C  are  so 
small  compared  to  x,  y,  z  that  their  squares  can  be  neglected,  the  equation  can  be 
transformed  by  the  use  of  auxiliary  quantities  q  and  /  where 

-*o£  +  ym  +  zoC 

*  7  9 

f=  •  (11.52-4) 

The  final  Encke  equations  become 

W2£  =  or^fl  +  m)±(fqx +  E ^k2mj  -  I    .  (J  1.52-5) 

Where  w  represents  the  interval  of  integration.  Similar  equations  hold  for  77  and  f. 

Encke's  procedure  normally  allows  a  larger  step  size  than  Cowell's  but  when 
close  approaches  happen,  the  Encke  perturbations  tend  to  grow  rapidly  in  size, 
requiring  a  smaller  step  interval. 

Other  approaches  to  the  numerical  solution  of  differential  equations  are  pro- 
vided by  Runge-Kutta  methods.  These  are  single-step  methods  with  each  step  being 
independent  of  those  preceding. 

Given: 

dx  , 

—  =  f(t,x);       x(t0)  s=  x0.  (1 1.52-6) 

A  widely  used  Runge-Kutta  method  (to  the  fourth  order)  involves  the  following 
operations  for  one  step.  Here  h  is  the  step  interval. 

fo  =  f(k>x), 

h  =  /(^0+|M)  +  |A/o)  , 
f2=f(t0+^h,x0  +  ^hflSj  , 


11  /  COMPUTATIONAL  TECHNIQUES 

h  =f(to  +  h,x0  +  hf2), 


565 


(11.52-7) 

Then 

x(t0  +  h)  =  x,  =  x0  +  l-(f0  +  2/,  +  h  +  f3), 
6 

Similar  equations  exist  in  y  and  z. 

Equations  to  the  fourth  order  are  not  sufficiently  accurately  for  most  orbital 
calculations  but  this  serves  as  an  example  of  the  method.  For  modifications  of  the 
method  refer  to  Danby  [Section  11.7]. 

In  all  the  step-by-step  methods  for  numerical  solution  of  differential  equations 
some  precautions  apply: 

(1)  The  interval  of  tabulation  must  be  monitored  in  cases  of  close  approach, 
since  the  approximations  used  in  the  iterative  process  may  prove  to  be  of 
insufficient  accuracy.  Automatic  methods  to  vary  the  step  size  are  now  in 
use  with  some  methods. 

(2)  The  accumulation  of  round-off  errors  must  be  monitored.  The  probable 
error  after  n  steps  can  be  estimated. 

(3)  If  the  method  of  solution  adopted  makes  use  of  truncated  formulas  either 
corrections  must  be  applied  subsequently  or  the  number  of  figures  in  the 
solution  must  be  reduced  accordingly. 

Examples  of  numerical  integrations  may  be  found  in  Brouwer  and  Clemence 
(1961)  in  Astronomical  Papers  American  Ephemerides,  vols.  XII  and  XX,  pt.  1, 
and  in  Danby  (1988)  (Section  11.7). 

An  example  of  a  multistep  scheme  is  the  Adams-Bashforth  method.  The  order 
of  this  method  is  limited  by  the  number  of  terms  the  user  is  willing  to  compute. 
The  formulas  for  this  method  are 

v 

xn+]  =Xn+hY^  akVkfn,  (1 1.52-8) 

where 

the  number  of  terms, 
1    5    3  251  95 
'2' 12' 8' 720' 288'"" 

/„, 


N  = 
a  = 

Vkf„  = 

/„  = 


566  EXPLANATORY  SUPPLEMENT 

This  method  can  be  started  using  a  single  step  method  such  as  the  Runge-Kutta. 

To  differentially  correct  the  initial  conditions  of  the  motion,  one  integrates  seven 
orbits  simultaneously.  The  first  orbit  uses  unaltered  initial  conditions.  Each  of  the 
rest  of  the  orbits  uses  initial  conditions  for  which  one  coordinate  or  velocity  has  been 
incremented  by  a  small  amount.  Earth  based  observations  are  right  ascensions  and 
declinations  of  the  satellite.  The  residuals  for  these  observations  can  be  expressed 
as 

eta,  .        eta,  .        eta,  .        eta,  ,  ■      eta,  .  ■      eta,  .  , 

dtj  86,  ddi  86,    .      d6j    .  &6i 

A6i  =  — -  AXn  +  — ^AKo  +  -^-AZb  +  -^-AX„  +  —t^AYq  +  -^-AZq, 
dX0  OY0  dZo   ^    dX0  8Y0  8Zq 

(11.52-9) 

where  a  and  5  are  the  right  ascension  and  declination  respectively;  Xq,  Yq,  Zq,  Xq, 
Yq,  and  Zq  are  the  initial  coordinates  and  velocities;  the  subscript  i  refers  to  the 
number  of  the  observation.  The  partial  derivatives  are  evaluated  numerically,  and 
can  be  written  in  the  form 

eta,  _  ajiXp  +  AXp,  Yu.Zp.Xp,  Kp.Zu)  -  q,(Xq,  Yq,Zo,Xq,  Yq,Zq) 
aXo  AX,, 

The  differential  corrections  can  be  written  as 

AR  =  (ATArlATAr.  (11.52-11) 

where  AR  is  the  matrix  of  corrections  to  the  initial  conditions,  A  is  the  matrix  of 
the  partial  derivatives,  and  Ar  is  the  matrix  of  residuals. 


1 1 .6  STATISTICS 

1 1 .61    The  Accumulation  of  Error 

The  formulas  listed  in  Table  11.61.1  indicate  the  way  in  which  errors  accumulate 
in  simple  arithmetical  operations.  The  distribution  of  accumulated  error  is  usually 
nearly  normal,  whatever  the  distributions  of  the  original  errors,  so  the  standard 
deviation  of  the  error,  calculated  from  the  formulas,  is  of  value  in  the  examination 
of  the  differences  of  tabulated  functions.  The  notation  used  and  assumptions  made 
in  the  table  are: 

a,-  is  the  absolute  error  of  Aj,  in  the  sense  of  given  value  minus  true  value.  These 
errors  are  assumed  to  be  unbiased  and  independent  . 


11  /  COMPUTATIONAL  TECHNIQUES 


567 


Table  11.61.1 

Accumulation  of  Error  in  Arithmetical  Operations 


Operation 

Absolute  Error 

Variance  of  Error  (unit  1/12) 

Em* 

Em  « 

Em  a' 

"^Ett  miA> 

ma  JPJ^  m,Ai 

E«  'Aj  lar9e> 

^nPa  if  q,  =  q  for  all  i 

ka  +  e  Y^l-i  ^'a'  +  e 

*f2°  +  1E"=,'c?Q'  +  1 

krA 

kra+  e 

9(P)A 

g(p)a  +  e 

/01{9(P)}2*.«  +  1 

Em  P'A  (for  <*,=  <*) 

AfAz 

A2a^  +  A-\a2  +  e 

A^ci\  +  A^a2  +  1 

A" 

nA"~ 1  a  +  e 

W-Zq  +  1 

1 

A 

(-^)a+e 

(1  lA*)a  +  1 

AV2 

nm  difference  of  A(x) 
f(A)  by  direct  interpolation 


(^)a,  -(|}a2  +  e 


af'(A)  +  er  +  e,  +  e 


f[A)  by  inverse  interpolation     {a-e,-  ei)f'(A)  +  e 


it  a  is  constant 

{f'(A)}2a  +  vr  +  V,  +  1 
(f{A)}Ha+Vr  +  vt)  +  1 


is  the  variance,  or  mean  square  value,  of  the  error  of  /4,-.  The  standard  deviation 
of  the  error  is  the  square  root  of  variance. 

,  m,  and  n  are  integers,  k  is  a  known  constant,  r  is  equally  likely  to  take  any  value 
between  -1/2  and  +1 12.  p  is  equally  likely  to  take  any  value  between  0  and  1. 


568  EXPLANATORY  SUPPLEMENT 

k,  r,  and  p  are  considered  to  be  free  from  error,  that  is,  they  are  exact  or  are  known 
to  more  significant  figures  than  the  quantities  A,. 

e  is  the  error  arising  from  the  rounding  of  the  final  result;  it  is  assumed  that  a 
guarding  figure  is  kept  in  intermediate  results,  e  is  equally  likely  to  take  any 
value  between  ±  1  /  2  so  that  its  variance  is  1/12,  equal  to  the  integral  of  e2 
between  +  1/2,  in  units  of  the  last  place  retained.  For  convenience  all  variances 
are  expressed  in  this  unit  of  1  / 12. 

In  addition,  er  is  the  error  due  to  the  rounding-off  errors  in  the  tabular  values, 
including  their  effects  on  the  differences;  et  is  the  truncation  error,  and  vr,  v,  are 
the  variances  of  er  and  e,.  If  all  values  of  the  interpolating  factor  p  are  equally 
likely,  vr  varies  from  0.67  for  linear  interpolation  to  0.81  for  interpolation  with  fifth 
differences.  If  f(A)  is  determined  from  a  critical  table  its  error  is  that  of  a  simple 
rounding-off  error  unless  the  number  of  figures  in  the  argument  is  small  or  unless 
the  interval  in  the  respondent  is  greater  than  unity. 

1 1 .62   The  Method  of  Least  Squares 

11.621  Introduction  When  one  is  measuring  the  physical  universe,  certain  con- 
stants must  be  determined  from  observation,  such  as  the  orbital  elements  of  a 
satellite  about  its  primary  or  the  rotational  elements  about  its  axis.  Methods  for  oh 
initio  determination  of  orbital  elements  from  three  or  more  observations  are  well- 
documented  in  the  literature  (Herget,  1948).  The  more  typical  case  assumes  that 
approximate  values  of  the  constants  are  available  on  which  a  provisional  theory 
can  be  based.  This  theory  is  then  used  to  construct  positions  against  which  the 
observations  can  be  compared.  Thus,  each  observation  minus  the  computed  place 
forms  a  difference,  referred  to  as  an  O  —  C.  The  errors  in  these  differences  can  arise 
from  three  sources:  errors  in  the  observations;  errors  in  the  constants  on  which  the 
computed  positions  are  based;  and  errors  in  the  theory  itself.  Only  the  first  two  er- 
ror sources  will  be  treated  in  the  following  discussion,  which  concerns  the  analysis 
of  O  —  C's  to  improve  the  initial  approximation  to  the  constants. 

11.622  Errors  of  Observation:  Frequency  Distribution  Errors  of  observation  may 
arise  from  many  sources,  The  size  of  these  errors  vary  and,  in  general,  follow  the 
normal  distribution  curve  or  probability  distribution  curve  wherein  small  errors 
occur  more  frequently  than  large  errors,  and  positive  errors  occur  with  the  same 
frequency  as  negative  errors.  In  most  problems,  the  frequency  distribution  of  the 
errors  is  not  known  in  advance.  However,  if  each  observation  is  assumed  to  be  af- 
fected by  the  sum  of  several  simultaneous,  independent  errors,  we  may  assume  the 
distribution  of  the  errors  to  be  accidental  rather  than  systematic,  the  latter  be- 
ing the  case  where  all  the  errors  have  a  common  origin.  As  there  is  no  satisfactory 


11  /  COMPUTATIONAL  TECHNIQUES  569 

mathematical  theory  of  systematic  errors,  we  must  proceed  initially  on  the  assump- 
tion that  the  errors  are  accidental.  In  this  case  if  a  set  of  random  variables  x  are 
independent  of  each  other,  the  theory  of  probability  postulates  that  the  frequency 
distribution  of  the  sum  of  such  variables,  each  with  its  own  frequency  distribution, 
will  slowly  approach  the  function 

Y=  4=exp(-/i2*2),  (11.622-1) 

where  h  is  defined  as  the  index  of  precision.  This  is  related  to  the  standard  deviation 
a,  or  the  root-mean- square  error  by  h2  —  1  /  2a2. 

The  best,  fit  to  a  series  of  n  observations,  according  to  the  principle  of  least 
squares,  is  the  one  that  reduces  the  sum  of  the  squares  of  the  errors  to  a  minimum. 
Assuming  that  the  index  of  precision  is  constant  in  this  set  of  observations  and 
letting  the  errors  associated  with  each  observation,  0,-,  be  x,,  the  probability,  P,,  of 
occurrence  of  error  jc,-  becomes 

h 

Pi  =  —=  exp(-h2xf)  dxu  (11 .622-2) 

Assuming  that  P  is  independent,  the  probability  that  each  error  will  occur  in  turn 
is 

P=^JLSj  exp^-^J^xfjdxidxn  ...  dxn.  (11.622-3) 

Thus  it  can  be  stated  that  the  set  of  errors  that  maximize  P  in  Equation  11.622-3 
will  produce  the  best  fit  to  the  observations  because  at  that  point  ^ii-^f  *s  a 
minimum. 

If  the  index  of  precision  varies  with  each  observation,  the  introduction  of  the 
factor  hi  requires  knowing  the  correspondence  between  the  hi  and  the  arbitrary 
weight  of  an  observation,  based  on  unit  weight.  If  the  precision  index  corresponding 
to  weight  1  is  h,  and  the  precision  index  corresponding  to  weight  W\  is  h\,  the 
probability  that  an  error  of  size  x  will  occur  in  an  observation  of  weight  1  is 

P  =  4=  exp(  -h  V)  dx.  (11 .622^1) 

Also  the  probability  of  an  error  of  size  x  occurring  in  an  observation  of  weight  W\  is 


P  =  -75  exp(— h2x2)dx. 


(11.622-5) 


57Q  EXPLANATORY  SUPPLEMENT 

Assuming  that  P  =  P\,  that  is  that  an  error  of  size  x  has  an  equal  probability  of 
occurring  in  both  Equations  11.622  4  and  11.622-5,  leads  to 

W|  =  (h\  I  h)~, 

Wi  =  (hi/h)2,  (11.622-6) 

which  shows  that  the  weights  are  proportional  to  the  precision  indices.  In  terms  of 
the  precision  index  h  and  the  weights  Wi, 


p  =  (  —  =         J    h"  exp  -h  2^ 

i=i 


dxidx2...dxn.  (11.622-7) 


showing  that  for  P  to  be  a  maximum,  the  Yl"=\  wi  *l  must  be  a  minimum. 

Assume  0,  (where  f  =  1,  2,  3, n)  to  be  observations  of  a  quantity  for  which  r 
is  the  true  value.  The  error  of  each  observation  is  x,  =  0,  -  r.  Using  the  standard 
deviation  rr  instead  of  the  precision  index  h,  the  best  estimate  7  of  the  true  value 
t  is  that  which  reduces 

M2a2YSO\  -if 

to  a  minimum.  To  do  this  requires  that  d  =  0;  i.e.,  2£(0;  -  7)  =  0,  from 

which  7  ■■=■  1  /  »X)Oj,  or  the  best  estimate  is  the  arithmetic  mean. 

Given  n  observations  0,,  having  normally  distributed  errors  xh  the  error  of  the 
arithmetic  mean  is 

x=-Yxh  (11.622-8) 

which  is  a  linear  combination  of  n  random  variables.  If  the  mean  error  of  one 
observation  is  a,  then  it  can  be  shown  that  the  mean  error  of  the  arithmetic  mean 
is  the  a  of  one  observation  divided  by  the  ^/n. 

Once  the  estimate  7  of  the  true  value  r  of  the  measured  quantity  is  obtained, 
a  residual  r  can  be  formed  by  0f  — 7  a  r,.  Also  Of  ~T=  #«,  where  the  are  the  true 
errors  of  the  observations.  Then 

y^Jtj  =  2J  Oi  —jtT  a  H7  -  »T, 
7  =  T  +  2^  x,-  /  /l, 

r,  (11.622-9) 

Let  a,  be  the  mean  error  of  the  residuals  and  ax  be  the  mean  error  of  the  errors  Xt, 
then 

a2  =  <(«-!)/  n)2a2  +(»-!/  n2)a2  =(«-!/  «)<r2  ( 1 1 .622-10) 


11  /  COMPUTATIONAL  TECHNIQUES  571 

Since  a2  =  ^rin,  then  cr2  =  £V/n  -  1  and  the  mean-square  error  of  the  arithmetic 
mean  in  terms  of  the  residuals  is 


r=  y^r2/H(n-  1).  (11.622-11) 

1 1.623  The  Method  of  Least  Squares  In  many  problems  the  quantity  measured  is 
not  the  one  that  we  wish  to  correct.  A  simple  case  involves  one  unknown,  to  be 
determined  from  measurements  Q,  where  i  =  1,  2,  3,  n.  Thus  C  =  /(")•  Let  t]c  be 
the  provisionally  known  value  of  n,  and  %  be  the  the  value  to  be  determined  from 
the  measurements,  then  the  difference  %  -  nf  =  A??.  Calculating  from  jfc  for  each 
measurement  1,  gives  A,<  =  Q  -  Q.  Using  a  Taylor's  series  expansion,  AC  may  be 
written  as  a  function  of  An, 

AC  =  gA„  +  ^(A^)2  ^fl(A^)3  +  - ■  (11.623-1) 

Assuming  Ar/  is  small  enough  that  its  square  and  higher  powers  can  be  ignored, 
then 

fdf 


,  A7?  =  AC  (11.623-2) 

\dvJ  1 

and  we  have  n  equations  where  in  each  case  the  (9/  /  9n)  is  a  known  numerical 
coefficient.  Denoting  the  coefficients  by  A,  the  equations  of  condition  can  be  written 
AA77  =  AC-  The  preferred  value  of  the  unknown  is  that  for  which 

9    =5>,Ar,-A,C)2  =0.  (11.623-3) 


dArj 


Differentiating  gives  £A2An  =  £AAC,  thus  An  =  £AAc/  £A2  and  An+n,  = 

In  a  more  general  problem  it  may  be  necessary  to  determine  more  unknowns 
than  one  from  a  series  of  measurements.  The  constants  of  a  planetary  orbit  C, 
(where  i  =  1,  2,  3,  n)  may  already  be  approximately  known  and  can  be  used  to 
compute  the  r)c  corresponding  to  each  observation  170,  then  %  -  »fc  =  An.  Let  the 
corrections  to  the  approximate  values  of  the  orbital  constants  be  Eh  so  that  the 
corrected  constants  are  C,  +£,  .  The  equations  of  condition  can  then  be  written 


Setting  dr]/  dC\  =A,  dr\l  OC,  =B,dv/  dCy  =  C,  and  so  on,  the  conditional  equation 
can  be  written 

A£,  +  BE2  +  CE?  +  -+  NE„  =  An.  ( 1 1  -623-5) 


572  EXPLANATORY  SUPPLEMENT 

Supposing  there  are  no  errors  in  the  An,  i.e.,  that  the  theory  used  is  adequate,  and 
that  the  observations  contain  no  errors,  then  the  only  source  of  error  in  the  solution 
comes  from  the  approximate  values  of  the  constants.  The  theory  of  linear  equations 
states  that  n  independent  equations  of  condition  are  necessary  and  sufficient  to 
determine  the  Et.  With  the  above  restrictions  as  to  the  source  of  errors,  the  solution 
will  yield  values  of  E  that  will  exactly  satisfy  the  n  equations.  Normally,  however, 
accidental  errors  in  the  values  of  An  prevent  the  derivation  of  the  exact  values  of 
Ej.  Increasing  the  number  m  of  observations  and  thus  the  number  of  conditional 
equations  will  decrease  the  effect  of  the  accidental  errors.  In  some  problems  in 
dynamical  astronomy  it  is  not  unusual  to  have  m  exceed  n  by  a  factor  of  1000. 
Since  values  of  £/  are  derived  that  do  not  exactly  satisfy  the  conditional  equations, 
the  procedure  is  to  evaluate  the  left-hand  side  of  the  equations  and  subtract  from 
the  corresponding  An  to  produce  residuals  r.  The  best  values  of  the  £,  are  those 
that  reduce  the  sum  of  the  squares  of  the  residuals  (r)  to  a  minimum  as  discussed 
earlier. 

In  the  instance  where  there  are  m  equations  of  condition,  with  m  >  n,  the 
procedure  is  to  form  n  normal  equations  for  solution.  The  normals  are  formed  as 
follows.  Given  the  conditional  equations, 


A\E\  +  BlE2  +  ClE3  +  -~+N]E„  =  Ani, 
A2E]  +  B2E2  +  C2£3  +  •■■  +  N2E„  =  A772, 

A3Ei  +  B3E2  +  C3E3  +  ■•■  +N3En  =  An3,  etc.,  (11.623-6) 


multiply  through  each  conditional  equation  by  the  coefficient  A,-  and  sum  to  form 
the  first  normal  equation  in  the  array  that  follows,  where  the  brackets  represent 
summation.  Then  multiply  through  each  conditional  equation  by  B<  and  sum  to 
form  the  second  line  of  the  array.  Repeat  with  C,  to  form  the  third  line  of  the  array. 
The  procedure  is  repeated  through  the  coefficient  of  En  and  the  symmetry  of  the 
resulting  array  of  n  equations  in  n  unknowns  reduces  the  complexity  of  the  solution. 


[Af]Ei  +  [AiBi]E2  +  [AiQ}E3  +  ■■■  +  [AtNi]En 
[BiAj]E]  +  [Bj]E2  +  [5;C,]£3  +  -  +  [B,A/,]£„ 

[dA^  +  [mm  +  [cj]E3  +  -  +  [cmm* 


=  [AArji], 
=  [BiAml 

=  tCiAml  (11-623-7) 


11  /  COMPUTATIONAL  TECHNIQUES  573 

When  the  m  equations  of  condition  are  not  all  of  equal  weight,  each  equation  may 
be  multiplied  through  by  the  square  root  of  its  weight  before  forming  the  normals. 

Methods  of  solution  of  the  normal  equations  are  numerous  and  are  detailed  in 
the  references  given  at  the  end  of  this  chapter. 

An  example  of  the  method  of  least  squares  is  the  problem  of  fitting  a  straight 
line  through  a  series  of  measured  points,  where  the  function  A  +  Br)  -  f(rj)  is  real 
and  continuous. 


Example  1    The  data  are 

7?    I    0      0.80    1.60    2.40     3.20  4.00 

f(rj)  I  1.01    3.87    6.52    9.36    12.07  14.87 

The  coefficients  and  right  hand  members  of  the  six  equations  of  condition  can  be  written 
in  tabular  form: 


A 

B 

f(v) 

1 

0 

1.01 

1 

0.80 

3.87 

1 

1.60 

6.52 

1 

2.40 

9.36 

4 

3.20 

12.07 

1 

4.00 

14.87 

Assuming  all  of  the  equations  are  of  equal  weight,  the  normal  equations  are 

6A+  125  =  47.70 

124  +  35.25=  134.096,  (11.623-8) 

and  the  solution  given  by  the  least  squares  approximation  is 

A  =  +1.04 
B  =  +3.455 

or 

f(rj)"z(v)=  1.04+3.455r?.  (11.623-9) 

The  values  derived  from  the  solution  compared  to  the  measurements  are 

r)            0    0.80    1.60    2.40      3.20  4.00 

/(??)     1.01     3.87    6.52    9.36     12.07  14.87 

2(77)     1.04    3.77    6.54    9.30    12.07  14.83 

r         .03     .10     .02     .06       .00  .04 


The  sum  of  the  squares  of  the  residuals  is  0.0165  and  the  root  mean  square  error  of  the 
six  data  points  is  0.052. 


574 


EXPLANATORY  SUPPLEMENT 


11.7  REFERENCES 

Abrarnowitz,  M,  and  Stegun,  I.  (1973).  Handbook  of  Mathematical  Functions,  9th  ed. 
(Dover  Press,  New  York). 

Bowditch,  N.  (1981).  Section  on  mathematics.  American  Practical  Navigator  (U.S.  Gov- 
ernment Printing  Office,  Washington,  DC)  pp.  436-441. 

Brouwer,  D.  and  Clemence,  G.M.  (1961).  Methods  of  Celestial  Mechanics  (Academic  Press, 
New  York). 

Chauvenet,  W.  (1850).  Treatise  on  Plane  and  Spherical  Trigonometry  (H.  Perkins,  Philadel- 
phia) . 

Chauvenet,  W.  (1892).  A  Manual  of  Spherical  and  Practical  Astronomy  Philadelphia,  5th 
ed.  (Constable  and  Company  Limited,  London)  (Reprinted  Dover  Press,  New  York, 
1960). 

Danby,  J.M.A.  (1988).  Fundamentals  of  Celestial  Mechanics  2d  ed.  (Willmann-Bell,  Rich- 
mond, VA). 

Duncombe,  R.L.  (1969).  "Coordinates  of  Ceres,  Pallas,  Juno  and  Vesta  1928-2000"  Astro. 

Papers  Amer.  Eph,  XX,  II  (U.S.  Government  Printing  Office,  Washington,  DC). 
Eckert,  W.J.,  Brouwer,  D.,  and  Clemence,  G.M.  (1951).  "Coordinates  of  the  Five  Outer 

Planets  1653-2060"  Astro.  Papers  Amer.  Eph.  XII  (U.S.  Government  Printing  Office, 

Washington,  DC). 

Fox,  L.  and  Parker,  LB.  (1972).  Chebyshev  Polynomials  in  Numerical  Analysis  (Oxford 

University  Press,  Oxford,  England). 
Herget,  P.  (1948).  Computation  of  Orbits  Published  privately  by  author. 
Hildebrand,  F.B.  (1987).  Introduction  to  Numerical  Analysis  (Dover  Press,  New  York). 
H.M.  Nautical  Almanac  Office  (1956).  Interpolation  and  Allied  Tables  (H.M.  Stationery 

Office,  London). 

Jennings,  W.  (1964).  First  Course  in  Numerical  Methods  (McMillan,  New  York). 

Lanczos,  C.  (1956).  Applied  Analysis  (Prentice-Hall,  Englewood  Cliff,  NJ). 

Press,  W.H.,  Flannery,  B.P.,  Teukolsky,  S.A.,  and  Vetterling,  W.T.  (1986).  Numerical 

Recipes,  The  Art  of  Scientific  Computing  (Cambridge  University  Press,  Cambridge, 

England) . 

Scarborough,  J.B.  (1955).  Numerical  Mathematical  Analysis,  3rd  ed.  (Johns  Hopkins  Uni- 
versity Press,  Baltimore). 

Smart,  W.M.  (1958).  Combination  of  Observations  (Cambridge  University  Press,  Cam- 
bridge, England). 

Whittaker,  E.T.  and  Robinson,  G.  (1944).  The  Calculus  of  Observations,  4th  ed.  (Blackie, 
London) . 


CHAPTER 


Calendars 

by  L.E.  Doggett 


12.1  INTRODUCTION 

A  calendar  is  a  system  of  organizing  units  of  time  for  the  purpose  of  reckoning 
time  over  extended  periods.  By  convention,  the  day  is  the  smallest  calendrical  unit 
of  time;  the  measurement  of  fractions  of  a  day  is  classified  as  timekeeping.  The 
generality  of  this  definition  is  due  to  the  diversity  of  methods  that  have  been  used 
in  creating  calendars.  Although  some  calendars  replicate  astronomical  cycles  ac- 
cording to  fixed  rules,  others  are  based  on  abstract,  perpetually  repeating  cycles  of 
no  astronomical  significance.  Some  calendars  are  regulated  by  astronomical  obser- 
vations, some  carefully  and  redundantly  enumerate  every  unit,  and  some  contain 
ambiguities  and  discontinuities.  Some  calendars  are  codified  in  written  laws;  others 
are  transmitted  by  oral  tradition. 

The  common  theme  of  calendar  making  is  the  desire  to  organize  units  of  time 
to  satisfy  the  needs  and  preoccupations  of  society.  In  addition  to  serving  practical 
purposes,  the  process  of  organization  provides  a  sense,  however  illusory,  of  under- 
standing and  controlling  time  itself.  Thus  calendars  serve  as  a  link  between  mankind 
and  the  cosmos.  It  is  little  wonder  that  calendars  have  held  a  sacred  status  and  have 
served  as  a  source  of  social  order  and  cultural  identity.  Calendars  have  provided 
the  basis  for  planning  agricultural,  hunting,  and  migration  cycles,  for  divination 
and  prognostication,  and  for  maintaining  cycles  of  religious  and  civil  events.  What- 
ever their  scientific  sophistication,  calendars  must  ultimately  be  judged  as  social 
contracts,  not  as  scientific  treatises. 

According  to  a  recent  estimate  (Fraser,  1987),  there  are  about  forty  calendars 
used  in  the  world  today.  This  chapter  is  limited  to  the  half-dozen  principal  calendars 
in  current  use.  Furthermore,  the  emphasis  of  the  chapter  is  on  function  and  calcu- 
lation rather  than  on  culture.  The  fundamental  bases  of  the  calendars  are  given, 

575 


576  EXPLANATORY  SUPPLEMENT 

along  with  brief  historical  summaries.  Although  algorithms  are  given  for  correlat- 
ing these  systems,  close  examination  reveals  that  even  the  standard  calendars  are 
subject  to  local  variations.  With  the  exception  of  the  Julian  calendar,  this  chapter 
does  not  deal  with  extinct  systems.  Inclusion  of  the  Julian  calendar  is  justified  by 
its  everyday  use  in  historical  studies. 

Despite  a  vast  literature  on  calendars,  truly  authoritative  references,  partic- 
ularly in  English,  are  difficult  to  find.  Aveni  (1989)  surveys  a  broad  variety  of 
calendrical  systems,  stressing  their  cultural  contexts  rather  than  their  operational 
details.  Parise  (1982)  provides  useful,  though  not  infallible,  tables  for  date  con- 
version. Fotheringham  (1935)  and  the  Encyclopedia  of  Religion  and  Ethics  (1910), 
in  its  section  on  "Calendars,"  offer  basic  information  on  historical  calendars.  The 
sections  on  "Calendars"  and  "Chronology"  in  all  editions  of  the  Encyclopedia  Bri- 
tannica  provide  useful  historical  surveys.  Ginzel  (1906)  remains  an  authoritative,  if 
dated,  standard  of  calendrical  scholarship.  References  on  individual  calendars  are 
given  in  the  relevant  sections. 

12.1 1    Astronomical  Bases  of  Calendars 

The  principal  astronomical  cycles  are  the  day  (based  on  the  rotation  of  the  Earth 
on  its  axis),  the  year  (based  on  the  revolution  of  the  Earth  around  the  Sun),  and  the 
month  (based  on  the  revolution  of  the  Moon  around  the  Earth).  The  complexity 
of  calendars  arises  because  these  cycles  of  revolution  do  not  comprise  an  integral 
number  of  days,  and  because  astronomical  cycles  are  neither  constant  nor  perfectly 
commensurable  with  each  other. 

The  tropical  year  is  defined  as  the  mean  interval  between  vernal  equinoxes;  it 
corresponds  to  the  cycle  of  the  seasons.  The  following  expression,  based  on  the 
orbital  elements  of  Laskar  (1986),  is  used  for  calculating  the  length  of  the  tropical 
year: 

365^2421896698  -0.00000615359  7- 7.29  x  10"-10r2  +  2. 64  x  10~WT3  (12.11-1) 

where  T  =  (JD  -  2451545.0)  /  36525  and  JD  is  the  Julian  day  number  (see  Sec- 
tion 12.7).  However,  the  interval  from  a  particular  vernal  equinox  to  the  next  may 
vary  from  this  mean  by  several  minutes. 

The  synodic  month,  the  mean  interval  between  conjunctions  of  the  Moon  and 
Sun,  corresponds  to  the  cycle  of  lunar  phases.  The  following  expression  for  the  syn- 
odic month  is  based  on  the  lunar  theory  of  Chapront-Touze  and  Chapront  (1988): 

29^5305888531  +0.00000021621  7- -3. 64  x  10-|0r2.  (12.11-2) 

Again  T  =  (JD -2451545. 0)/36525  and  JD  is  the  Julian  day  number.  Any  particular 
phase  cycle  may  vary  from  the  mean  by  up  to  seven  hours. 


12  /  CALENDARS  577 

In  the  preceding  formulas,  T  is  measured  in  Julian  centuries  of  Terrestrial  Dy- 
namical Time  (TDT),  which  is  independent  of  the  variable  rotation  of  the  Earth. 
Thus,  the  lengths  of  the  tropical  year  and  synodic  month  are  here  defined  in  days 
of  86400  seconds  of  International  Atomic  Time  (TAI).  (See  Chapter  2  for  further 
information  on  time  scales.) 

From  these  formulas  we  see  that  the  cycles  change  slowly  with  time.  Further- 
more, the  formulas  should  not  be  considered  to  be  absolute  facts;  they  are  the  best 
approximations  possible  today.  Therefore,  a  calendar  year  of  an  integral  number  of 
days  cannot  be  perfectly  synchronized  to  the  tropical  year.  Approximate  synchro- 
nization of  calendar  months  with  the  lunar  phases  requires  a  complex  sequence  of 
months  of  29  and  30  days.  For  convenience  it  is  common  to  speak  of  a  lunar  year 
of  twelve  synodic  months,  or  354.36707  days. 

Three  distinct  types  of  calendars  have  resulted  from  this  situation.  A  solar 
calendar,  of  which  the  Gregorian  calendar  in  its  civil  usage  is  an  example,  is  de- 
signed to  maintain  synchrony  with  the  tropical  year.  To  do  so,  days  are  intercalated 
(forming  leap  years)  to  increase  the  average  length  of  the  calendar  year.  A  lunar 
calendar,  such  as  the  Islamic  calendar,  follows  the  lunar  phase  cycle  without  regard 
for  the  tropical  year.  Thus  the  months  of  the  Islamic  calendar  systematically  shift 
with  respect  to  the  months  of  the  Gregorian  calendar.  The  third  type  of  calendar, 
the  lunisolar  calendar,  has  a  sequence  of  months  based  on  the  lunar  phase  cycle; 
but  every  few  years  a  whole  month  is  intercalated  to  bring  the  calendar  back  in 
phase  with  the  tropical  year.  The  Hebrew  and  Chinese  calendars  are  examples  of 
this  type  of  calendar. 

12.12   Nonastronomical  Bases  of  Calendars:  the  Week 

Calendars  also  incorporate  nonastronomical  elements,  such  as  numerical  cycles, 
local  environmental  observations,  or  decisions  by  societal  authorities.  In  the  Gre- 
gorian calendar,  the  week  and  month  are  nonastronomical  units,  though  the  month 
can  be  traced  back  to  calendars  that  counted  the  phase  cycle  of  the  Moon. 

The  origin  of  the  seven-day  week  is  uncertain.  As  a  continuously  running,  un- 
interrupted cycle,  it  comes  to  us  as  part  of  Jewish  tradition.  However,  Biblical 
and  Talmudic  texts  indicate  a  variety  of  conflicting  calendrical  practices.  System- 
atic observance  of  the  Sabbath  every  seventh  day  may  have  developed  as  late  as 
the  Babylonian  Exile  in  the  sixth  century  B.C.,  followed  by  a  period  of  gradual 
acceptance. 

The  number  seven  had  mystical  and  cosmological  significance  throughout  the 
Semitic  cultures.  It  was  used  in  the  Babylonian  and  Assyrian  calendars,  though  not 
as  a  continuous  cycle.  Although  the  seven-day  week  may  have  its  origin  in  number 
mysticism,  astronomy  may  have  contributed  to  the  mysticism.  The  Sun,  Moon, 
and  naked-eye  planets  comprise  the  seven  "wandering  stars."  Seven  is  a  useful,  if 
inexact,  count  of  days  between  the  four  Moon  phases,  and  four  times  seven  is  a 


578  EXPLANATORY  SUPPLEMENT 

useful,  if  inexact,  estimate  of  days  from  first  to  last  visibility  of  the  Moon  in  its 
phase  cycle. 

In  Jewish  practice,  the  days  of  the  week  were  designated  by  numbers  rather 
than  by  names,  except  that  day  7  was  known  as  the  Sabbath.  Recognition  of  the 
week  and  the  observance  of  the  Sabbath  as  a  rest  day  gradually  spread  to  the 
Roman  world.  The  use  of  names  to  designate  the  days  of  the  week  developed  in 
the  Roman  culture  of  the  second  and  first  centuries  B.C.  These  names  come  from 
the  astrological  practice  of  naming  each  day  after  the  planet  that  governed  the 
day.  At  that  time,  the  Sun  and  Moon  were  included  among  the  planets.  "Saturn's 
day"  coincided  with  the  Jewish  Sabbath.  The  planetary  names  were  gradually,  if 
reluctantly,  accepted  by  the  Jewish  and  Christian  cultures  (Gandz,  1949). 

It  is  a  reasonable,  but  ultimately  unprovable,  assumption  that  the  cyclic  conti- 
nuity of  the  week  was  maintained  without  interruption  by  religious  authorities  from 
its  origin  in  Biblical  times  to  the  present  day.  Although  ten  days  were  dropped  from 
the  Christian  calendar  in  the  Gregorian  Reform  of  1582,  the  cycle  of  weekdays  was 
not  disturbed.  Thus,  in  1582,  Thursday,  October  4,  of  the  Julian  calendar,  was 
followed  by  Friday,  October  15,  of  the  Gregorian  calendar. 

Colson  (1926)  and  Zerubavel  (1985)  are  standard  references  on  the  week.  The 
latter  reference  also  considers  other  week-like  numerical  cycles  used  by  past  and 
present  cultures. 


12.13   Calendar  Reform  and  Accuracy 

In  most  societies  a  calendar  reform  is  an  extraordinary  event.  Adoption  of  a  calendar 
depends  on  the  forcefulness  with  which  it  is  introduced  and  on  the  willingness  of 
society  to  accept  it.  For  example,  the  acceptance  of  the  Gregorian  calendar  as  a 
worldwide  standard  spanned  more  than  three  centuries. 

The  legal  code  of  the  United  States  does  not  specify  an  official  national  calendar. 
Use  of  the  Gregorian  calendar  in  the  United  States  stems  from  an  Act  of  Parliament 
of  the  United  Kingdom  in  1751,  which  specified  use  of  the  Gregorian  calendar  in 
England  and  its  colonies.  However,  its  adoption  in  the  United  Kingdom  and  other 
countries  was  fraught  with  confusion,  controversy,  and  even  violence  (Bates,  1952: 
Gingerich,  1983;  Hoskin,  1983).  It  also  had  a  deeper  cultural  impact  through  the 
disruption  of  traditional  festivals  and  calendrical  practices  (MacNeill,  1982). 

Because  calendars  are  created  to  serve  societal  needs,  the  question  of  a  calen- 
dar's accuracy  is  usually  misleading  or  misguided.  A  calendar  that  is  based  on  a 
fixed  set  of  rules  is  accurate  if  the  rules  are  consistently  applied.  For  calendars  that 
attempt  to  replicate  astronomical  cycles,  one  can  ask  how  accurately  the  cycles  are 
replicated.  However,  astronomical  cycles  are  not  absolutely  constant,  and  they  are 
not  known  exactly  (see  Section  12.11).  In  the  long  term,  only  a  purely  observational 


12  /  CALENDARS  579 

calendar  maintains  synchrony  with  astronomical  phenomena.  However,  an  obser- 
vational calendar  exhibits  short-term  uncertainty,  because  the  natural  phenomena 
are  complex  and  the  observations  are  subject  to  error. 


12.14   Historical  Eras  and  Chronology 

The  calendars  treated  in  this  chapter,  except  for  the  Chinese  calendar  (see  Sec- 
tion 12.61),  have  counts  of  years  from  initial  epochs.  In  the  case  of  the  Chinese 
calendar  and  some  calendars  not  included  here,  years  are  counted  in  cycles,  with 
no  particular  cycle  specified  as  the  first  cycle.  Some  cultures  eschew  year  counts  al- 
together but  name  each  year  after  an  event  that  characterized  the  year.  However,  a 
count  of  years  from  an  initial  epoch  is  the  most  successful  way  of  maintaining  a  con- 
sistent chronology.  Whether  this  epoch  is  associated  with  an  historical  or  legendary 
event,  it  must  be  tied  to  a  sequence  of  recorded  historical  events. 

This  is  illustrated  by  the  adoption  of  the  birth  of  Christ  as  the  initial  epoch 
of  the  Christian  calendar.  This  epoch  was  established  by  the  sixth-century  scholar 
Dionysius  Exiguus,  who  was  compiling  a  table  of  dates  of  Easter.  An  existing  table 
covered  the  nineteen-year  period  denoted  228-247,  where  years  were  counted  from 
the  beginning  of  the  reign  of  the  Roman  emperor  Diocletian.  Dionysius  continued 
the  table  for  a  nineteen-year  period,  which  he  designated  Anni  Domini  Nostri  Jesu 
Christ!  532-550.  Thus,  Dionysius'  Anno  Domini  532  is  equivalent  to  Anno  Diocle- 
tiani  248.  In  this  way  a  correspondence  was  established  between  the  new  Christian 
Era  and  an  existing  system  associated  with  historical  records.  What  Dionysius  did 
not  do  is  establish  an  accurate  date  for  the  birth  of  Christ.  Although  scholars  gen- 
erally believe  that  Christ  was  born  some  years  before  A.D.  1,  the  historical  evidence 
is  too  sketchy  to  allow  a  definitive  dating. 

Given  an  initial  epoch,  one  must  consider  how  to  record  preceding  dates.  Bede, 
the  eighth-century  English  historian,  began  the  practice  of  counting  years  backward 
from  A.D.  1  (see  Colgrave  and  Mynors,  1969).  In  this  system,  the  year  A.D.  1  is 
preceded  by  the  year  1  B.C.,  without  an  intervening  year  0.  Because  of  the  numerical 
discontinuity,  this  "historical"  system  is  cumbersome  for  comparing  ancient  and 
modern  dates.  Today,  astronomers  use  +1  to  designate  A.D.  1.  Then  +1  is  naturally 
preceded  by  year  0,  which  is  preceded  by  year  —1.  Since  the  use  of  negative  numbers 
developed  slowly  in  Europe,  this  "astronomical"  system  of  dating  was  delayed  until 
the  eighteenth  century,  when  it  was  introduced  by  the  astronomer  Jacques  Cassini 
(Cassini,  1740). 

Even  as  use  of  Dionysius'  Christian  Era  became  common  in  ecclesiastical  writ- 
ings of  the  Middle  Ages,  traditional  dating  from  regnal  years  continued  in  civil  use. 
In  the  sixteenth  century,  Joseph  Justus  Scaliger  tried  to  resolve  the  patchwork  of 
historical  eras  by  placing  everything  on  a  single  system  (Scaliger,  1583).  Instead 
of  introducing  negative  year  counts,  he  sought  an  initial  epoch  in  advance  of  any 
historical  record.  His  numerological  approach  utilized  three  calendrical  cycles:  the 


580  EXPLANATORY  SUPPLEMENT 

28-year  solar  cycle,  the  nincteen-year  cycle  of  Golden  Numbers,  and  the  fifteen-year 
induction  cycle.  The  solar  cycle  is  the  period  after  which  weekdays  and  calendar 
dates  repeat  in  the  Julian  calendar.  The  cycle  of  Golden  Numbers  is  the  period 
after  which  moon  phases  repeat  (approximately)  on  the  same  calendar  dates.  The 
indiction  cycle  was  a  Roman  tax  cycle.  Scaliger  could  therefore  characterize  a  year 
by  the  combination  of  numbers  (S,G,/),  where  5  runs  from  1  through  28,  G  from 
1  through  19,  and  /  from  1  through  15.  Scaliger  noted  that  a  given  combination 
would  recur  after  7980  (=  28  x  19  X  15)  years.  He  called  this  a  Julian  Period,  be- 
cause it  was  based  on  the  Julian  calendar  year.  For  his  initial  epoch  Scaliger  chose 
the  year  in  which  S,  G,  and  /  were  all  equal  to  1.  He  knew  that  the  year  1  B.C.  was 
characterized  by  the  number  9  of  the  solar  cycle,  by  the  Golden  Number  1,  and  by 
the  number  3  of  the  indiction  cycle,  i.e.,  (9,1,3).  He  found  that  the  combination 
(1, 1, 1)  occurred  in  4713  B.C.  or,  as  astronomers  now  say,  -4712.  This  serves  as 
year  1  of  Scaliger's  Julian  Period.  It  was  later  adopted  as  the  initial  epoch  for  the 
Julian  day  numbers  (see  Section  12.7). 


12.2   THE  GREGORIAN  CALENDAR 

The  Gregorian  calendar  today  serves  as  an  international  standard  for  civil  use.  In 
addition,  it  regulates  the  ceremonial  cycle  of  the  Roman  Catholic  and  Protestant 
churches.  In  fact,  its  original  purpose  was  ecclesiastical.  Although  a  variety  of  other 
calendars  are  in  use  today,  they  are  restricted  to  particular  religions  or  cultures. 

12.21    Rules  for  Civil  Use 

Years  are  counted  from  the  initial  epoch  defined  by  Dionysius  Exiguus  (see  Sec- 
tion 12.14),  and  are  divided  into  two  classes:  common  years  and  leap  years.  A 
common  year  is  365  days  in  length;  a  leap  year  is  366  days,  with  an  intercalary  day. 
designated  February  29,  preceding  March  1.  Leap  years  are  determined  according 
to  the  following  rule: 

Every  year  that  is  exactly  divisible  by  4  is  a  leap  year,  except  for  years 
that  are  exactly  divisible  by  100;  these  centurial  years  are  leap  years 
only  if  they  are  exactly  divisible  by  400. 

As  a  result  the  year  2000  is  a  leap  year,  whereas  1900  and  2100  are  not  leap 
years.  These  rules  can  be  applied  to  times  prior  to  the  Gregorian  reform  to  create 
a  proleptic  Gregorian  calendar.  In  this  case,  year  0  (1  B.C.)  is  considered  to  be 
exactly  divisible  by  4,  100,  and  400;  hence  it  is  a  leap  year. 

The  Gregorian  calendar  is  thus  based  on  a  cycle  of  400  years,  which  comprises 
146097  days.  Since  146097  is  evenly  divisible  by  7,  the  Gregorian  civil  calendar 
exactly  repeats  after  400  years.  Dividing  146097  by  400  yields  an  average  length 


12  /  CALENDARS 


581 


Table  12.21.1 

Months  of  the  Gregorian  Calendar 


1 

lam  inru 
Jal  lUal  y 

31 

7. 

July 

31 

2. 

February 

28* 

8. 

August 

31 

3. 

March 

31 

9. 

September 

30 

4. 

April 

30 

10. 

October 

31 

5. 

May 

31 

11. 

November 

30 

6. 

June 

30 

12. 

December 

31 

*  In  a  leap  year,  February  has  29  days. 


of  365.2425  days  per  calendar  year,  which  is  a  close  approximation  to  the  length 
of  the  tropical  year.  Comparison  with  Equation  12.11  1  reveals  that  the  Gregorian 
calendar  accumulates  an  error  of  one  day  in  about  2500  years.  Although  various 
adjustments  to  the  leap-year  system  have  been  proposed,  none  has  been  instituted. 

Within  each  year,  dates  are  specified  according  to  the  count  of  days  from  the 
beginning  of  the  month.  The  order  of  months  and  number  of  days  per  month  were 
adopted  from  the  Julian  calendar  (see  Table  12.21.1  and  Section  12.8). 

12.22   Ecclesiastical  Rules 

The  ecclesiastical  calendars  of  Christian  churches  are  based  on  cycles  of  movable 
and  immovable  feasts.  Christmas  is  the  principal  immovable  feast,  with  its  date 
set  at  December  25.  Easter  is  the  principal  movable  feast,  and  dates  of  most  other 
movable  feasts  are  determined  with  respect  to  Easter.  However,  the  movable  feasts 
of  the  Advent  and  Epiphany  seasons  are  Sundays  reckoned  from  Christmas  and  the 
Feast  of  the  Epiphany,  respectively. 

In  the  Gregorian  calendar,  the  date  of  Easter  is  defined  to  occur  on  the  Sunday 
following  the  ecclesiastical  Full  Moon  that  falls  on  or  next  after  March  21.  This 
should  not  be  confused  with  the  popular  notion  that  Easter  is  the  first  Sunday 
after  the  first  Full  Moon  following  the  vernal  equinox.  In  the  first  place,  the  vernal 
equinox  does  not  necessarily  occur  on  March  21.  In  addition,  the  ecclesiastical 
Full  Moon  is  not  the  astronomical  Full  Moon— it  is  based  on  tables  that  do  not 
take  into  account  the  full  complexity  of  lunar  motion.  As  a  result,  the  date  of  an 
ecclesiastical  Full  Moon  may  differ  from  that  of  the  true  Full  Moon.  However,  the 
Gregorian  system  of  leap  years  and  lunar  tables  does  prevent  progressive  departure 
of  the  tabulated  data  from  the  astronomical  phenomena. 

The  ecclesiastical  Full  Moon  is  defined  as  the  fourteenth  day  of  a  tabular  luna- 
tion, where  day  1  corresponds  to  the  ecclesiastical  New  Moon.  The  tables  are  based 
on  the  Metonic  cycle,  in  which  235  mean  synodic  months  occur  in  6939.688  days. 
Since  nineteen  Gregorian  years  is  6939.6075  days,  the  dates  of  Moon  phases  in  a 
given  year  will  recur  on  nearly  the  same  dates  nineteen  years  later.  To  prevent 


582  EXPLANATORY  SUPPLEMENT 

the  0.08  day  difference  between  the  cycles  from  accumulating,  the  tables  incorpo- 
rate adjustments  to  synchronize  the  system  over  longer  periods  of  time.  Additional 
complications  arise  because  the  tabular  lunations  are  of  29  or  30  integral  days. 
The  entire  system  comprises  a  period  of  5700000  years  of  2081882250  days,  which 
is  equated  to  70499183  lunations.  After  this  period,  the  dates  of  Easter  repeat 
themselves. 

The  following  algorithm  for  computing  the  date  of  Easter  is  based  on  the  al- 
gorithm of  Oudin  (1940).  It  is  valid  for  any  Gregorian  year,  Y.  All  variables  are 
integers  and  the  remainders  of  all  divisions  are  dropped.  The  final  date  is  given  by 
At,  the  month,  and  D,  the  day  of  the  month. 

C=Yi  100, 
N=Y—  19x<T/  19), 
K=(C-  17)/ 25, 

l  =  C-CI  4-  (C-/Q/3  +  I9x  7V+ 15, 
/  =  /-  30x(//30), 

/  =  /-(//28)x(l  -(//28)x(29/(/+l))x((21  -AO/11)), 
J  =Y+Y /4  +  /+2  -  C  +  C/4, 
7  =  7-7  x  {J  11), 
L  =  I-J, 

M  =  3  +  (L  +  40)/44, 

D  =  L  +  28-31x(M/4). 


Example    Compute  the  date  of  Easter  in  +2010. 

C  =  2010/  100 

AT  =  2010-  19  x  (2010/  19) 

K  =  (20-  1 7)  /  25 

/  =  20  -  20/4  -  (20  -  0)/3+  19  x  15  +  15 
/  =  309  -  30  x  (309  /  30) 

/=9-(9/28)x(l  -{9/28)x(29/(9+l))x((21  -  15)/ 11)) 

=  9-0x(l  -0x2x  1) 
7  =  2010  +  2010/4  +  9  +  2  -  20  +  20/4 
J  =  2508  -  7  x  (2508  /  7) 


=  20, 
=  15, 
=  0, 
=  309, 
=  9, 

=  9, 
=  2508, 
=  2, 


12  /  CALENDARS  583 

£  =  9-2  =7, 
M  =  3  +  (7  +  40)  /  44  =  4, 

D  =  7+28- 31  x  (4/4)  =4. 

Thus  in  +2010  Easter  will  occur  on  April  4. 


1 2.23   History  of  the  Gregorian  Calendar 

The  Gregorian  calendar  resulted  from  a  perceived  need  to  reform  the  method  of 
calculating  dates  of  Easter.  Under  the  Julian  calendar  the  dating  of  Easter  had 
become  standardized,  using  March  21  as  the  date  of  the  equinox  and  the  Metonic 
cycle  as  the  basis  for  calculating  lunar  phases.  By  the  thirteenth  century  it  was 
realized  that  the  true  equinox  had  regressed  from  March  21  (its  supposed  date 
at  the  time  of  the  Council  of  Nicea,  +325)  to  a  date  earlier  in  the  month.  As  a 
result,  Easter  was  drifting  away  from  its  springtime  position  and  was  losing  its 
relation  with  the  Jewish  Passover.  Over  the  next  four  centuries,  scholars  debated 
the  "correct"  time  for  celebrating  Easter  and  the  means  of  regulating  this  time 
calendrically.  The  Church  made  intermittent  attempts  to  solve  the  Easter  question, 
without  reaching  a  consensus. 

By  the  sixteenth  century  the  equinox  had  shifted  by  ten  days,  and  astronomical 
New  Moons  were  occurring  four  days  before  ecclesiastical  New  Moons.  At  the  behest 
of  the  Council  of  Trent,  Pope  Pius  V  introduced  a  new  Breviary  in  1568  and  Missal 
in  1570,  both  of  which  included  adjustments  to  the  lunar  tables  and  the  leap-year 
system.  Pope  Gregory  XIII,  who  succeeded  Pope  Pius  in  1572,  soon  convened  a 
commission  to  consider  reform  of  the  calendar,  since  he  considered  his  predecessor's 
measures  inadequate. 

The  recommendations  of  Pope  Gregory's  calendar  commission  were  instituted 
by  the  papal  bull  "Inter  Gravissimus,"  signed  on  1582  February  24.  Ten  days  were 
deleted  from  the  calendar,  so  that  1582  October  4  was  followed  by  1582  October  15, 
thereby  causing  the  vernal  equinox  of  1583  and  subsequent  years  to  occur  about 
March  21.  And  a  new  table  of  New  Moons  and  Full  Moons  was  introduced  for 
determining  the  date  of  Easter. 

Subject  to  the  logistical  problems  of  communication  and  governance  in  the  six- 
teenth century,  the  new  calendar  was  promulgated  through  the  Roman-Catholic 
world.  Protestant  states  initially  rejected  the  calendar,  but  gradually  accepted  it 
over  the  coming  centuries.  The  Eastern  Orthodox  churches  rejected  the  new  cal- 
endar and  continued  to  use  the  Julian  calendar  with  traditional  lunar  tables  for 
calculating  Easter.  Because  the  purpose  of  the  Gregorian  calendar  was  to  regulate 
the  cycle  of  Christian  holidays,  its  acceptance  in  the  non-Christian  world  was  ini- 
tially not  at  issue.  But  as  international  communications  developed,  the  civil  rules 
of  the  Gregorian  calendar  were  gradually  adopted  around  the  world. 


584  EXPLANATORY  SUPPLEMENT 

Anyone  seriously  interested  in  the  Gregorian  calendar  should  study  the  col- 
lection of  papers  resulting  from  a  conference  sponsored  by  the  Vatican  to  com- 
memorate the  four- hundredth  anniversary  of  the  Gregorian  Reform  (Coyne  et  al, 
1983). 

12.3   THE  HEBREW  CALENDAR 

As  it  exists  today,  the  Hebrew  calendar  is  a  lunisolar  calendar  that  is  based  on 
calculation  rather  than  observation.  This  calendar  is  the  official  calendar  of  Israel 
and  is  the  liturgical  calendar  of  the  Jewish  faith. 

In  principle  the  beginning  of  each  month  is  determined  by  a  tabular  New  Moon 
(molad)  that  is  based  on  an  adopted  mean  value  of  the  lunation  cycle.  To  ensure  that 
religious  festivals  occur  in  appropriate  seasons,  months  are  intercalated  according 
to  the  Metonic  cycle,  in  which  235  lunations  occur  in  nineteen  years. 

By  tradition,  days  of  the  week  are  designated  by  number,  with  only  the  seventh 
day,  Sabbath,  having  a  specific  name.  Days  are  reckoned  from  sunset  to  sunset,  so 
that  day  1  begins  at  sunset  on  Saturday  and  ends  at  sunset  on  Sunday.  The  Sabbath 
begins  at  sunset  on  Friday  and  ends  at  sunset  on  Saturday. 

12.31  Rules 

Years  are  counted  from  the  Era  of  Creation,  or  Era  Mundi,  which  corresponds  to 
—3760  October  7  on  the  Julian  proleptic  calendar.  Each  year  consists  of  twelve  or 
thirteen  months,  with  months  consisting  of  29  or  30  days.  An  intercalary  month 
is  introduced  in  years  3,  6,  8,  11,  14,  17,  and  19  in  a  nineteen-year  cycle  of  235 
lunations.  The  initial  year  of  the  calendar,  a.m.  (Anno  Mundi)  1,  is  year  1  of  the 
nineteen-year  cycle. 

The  calendar  for  a  given  year  is  established  by  determining  the  day  of  the  week 
of  Tishri  1  (first  day  of  Rosh  Hashanah  or  New  Year's  Day)  and  the  number  of  days 
in  the  year.  Years  are  classified  according  to  the  number  of  days  in  the  year  (see 
Table  12.31.1). 


Table  12.31.1 

Classification  of  Years  in  the  Hebrew  Calendar 


Deficient 

Regular 

Complete 

Ordinary  year 

353 

354 

355 

Leap  year 

383 

384 

385 

12  /  CALENDARS 


585 


Table  12.31 ,2 

Months  of  the  Hebrew  Calendar 


1. 

Tishri 

30 

7. 

Nisan 

30 

2. 

Hestivan 

29* 

8. 

lyar 

29 

3. 

Kislev 

30 1 

9. 

Sivan 

30 

4. 

Tevet 

29 

10. 

Tammuz 

29 

5. 

Shevat 

30 

11. 

Av 

30 

6. 

Adar 

29* 

12. 

Elul 

29 

*  In  a  complete  year,  Heshvan  has  30  days. 
+  In  a  deficient  year,  Kislev  has  29  days. 

*  In  a  leap  year  Adar  I  has  30  days;  it  is  followed  by  Adar  II  with  29  days. 


Table  12.31.3 

Terminology  of  the  Hebrew  Calendar 


Deficient  (/laser)  month:  a  month  comprising  29  days. 
Full  {male)  month:  a  month  comprising  30  days. 

Ordinary  year:  a  year  comprising  1 2  months,  with  a  total  of  353,  354,  or  355  days. 
Leap  year:  a  year  comprising  1 3  months,  with  a  total  of  383,  384,  or  385  days. 
Complete  year  (shelemah):  a  year  in  which  the  months  of  Heshvan  and  Kislev  both  contain 
30  days. 

Deficient  year  (haser):  a  year  in  which  the  months  of  Heshvan  and  Kislev  both  contain 
29  days. 

Regular  year  (kesidrah):  a  year  in  which  Heshvan  has  29  days  and  Kislev  has  30  days. 
Halakim  (singular,  helek):  "parts"  of  an  hour;  there  are  1080  halakim  per  hour. 
Molad  (plural,  moladot):  "birth"  of  the  Moon,  taken  to  mean  the  time  of  conjunction  for  modem 
calendric  purposes. 

Dehiyyah  (plural,  dehiyyot):  "postponement";  a  rule  delaying  1  Tishri  until  after  the  molad. 


The  months  of  Heshvan  and  Kislev  vary  in  length  to  satisfy  requirements  for 
the  length  of  the  year  (see  Table  12.31.1).  In  leap  years,  the  29-day  month  Adar  is 
designated  Adar  II,  and  is  preceded  by  the  30-day  intercalary  month  Adar  I. 

For  calendrical  calculations,  the  day  begins  at  6  p.m.,  which  is  designated  0 
hours.  Hours  are  divided  into  1080  halakim;  thus  one  helek  is  3  1/3  seconds.  (Ter- 
minology is  explained  in  Table  12.31.3.)  Calendrical  calculations  are  referred  to  the 
meridian  of  Jerusalem — 2  hours  21  minutes  east  of  Greenwich. 

Rules  for  constructing  the  Hebrew  calendar  are  given  in  the  sections  that  follow. 
Cohen  (1981),  Resnikoff  (1943),  and  Spier  (1952)  provide  reliable  guides  to  the  rules 
of  calculation. 

12.311  Determining  Tishri  1  The  calendar  year  begins  with  the  first  day  of  Rosh 
Hashanah  (Tishri  1).  This  is  determined  by  the  day  of  the  Tishri  molad  and  the 
four  rules  of  postponements  (dehiyyot).  The  dehiyyot  can  postpone  Tishri  1  until 


586 


EXPLANATORY  SUPPLEMENT 


Table  12.311.1 

Lunation  Constants  for  Determining  Tishri  1 

Lunations  Wee  ks -Day s-H  o  u  rs-Halakim 

1  =  4-1-12-0793 

12  =  50-4-08-0876 

13  =  54-5-21-0589 
235         =  991-2-16-0595 


one  or  two  days  following  the  moiad.  Tabular  new  moons  (maladot)  are  reckoned 
from  the  Tishri  molad  of  the  year  a.m.  1,  which  occurred  on  day  2  at  5  hours,  204 
halakim  (i.e.,  11:11:20  P.M.  on  Sunday,  —3760  October  6,  Julian  proleptic  calen- 
dar). The  adopted  value  of  the  mean  lunation  is  29  days,  12  hours,  793  halakim 
(29.530594  days).  To  avoid  rounding  and  truncation  errors,  calculations  should  be 
done  in  halakim  rather  than  decimals  of  a  day,  since  the  adopted  lunation  constant 
is  expressed  exactly  in  halakim. 

Lunation  constants  required  in  calculations  are  shown  in  Table  12.311.1.  By 
subtracting  off  the  weeks,  these  constants  give  the  shift  in  weekdays  that  occurs 
after  each  cycle. 


Example  1    Find  the  weekday  and  time  of  the  Tishri  jnolad  of  A.M.  2. 

Since  it  is  an  ordinary  year,  A.M.  1  has  twelve  lunations.  Therefore,  the  shift  in  weekdays 
for  twelve  lunations  can  be  added  to  the  epochal  molad: 

Days-Hours-Ha/afa'm 
epochal  molad  2-05-0204 
+  12  lunations  4-08-0876 
Tishri  molad,  a.m.  2  6-14-0000 

day  6  at  14  hours  000  halakim  corresponds  to  Thursday  at  8  A.M. 


The  dehiyyot  are  as  follows: 

(a)  If  the  Tishri  molad  falls  on  day  1,  4,  or  6,  then  Tishri  1  is  postponed  one 
day. 

(b)  If  the  Tishri  m,olad  occurs  at  or  after  18  hours  (i.e.,  noon),  then  Tishri  1 
is  postponed  one  day.  If  this  causes  Tishri  1  to  fall  on  day  1,  4,  or  6,  then 
Tishri  1  is  postponed  an  additional  day  to  satisfy  dehiyyah  (a). 

(c)  If  the  Tishri  molad  of  an  ordinary  year  (i.e.,  of  twelve  months)  falls  on  day 
3  at  or  after  9  hours,  204  halakim,  then  Tishri  1  is  postponed  two  days  to 
day  5,  thereby  satisfying  dehiyyah  (a). 


12  /  CALENDARS  5Q7 

(d)  If  the  first  molad  following  a  leap  year  falls  on  day  2  at  or  after  15  hours 
589  halakim,  then  Tishri  1  is  postponed  one  day  to  day  3. 


Example  2    Find  the  day  of  A.M.  5760  Tishri  1. 

Since  the  initial  epoch,  5759  years  have  passed,  comprising  303  nineteen-year  cycles  plus 
two  years.  Both  of  these  years  are  ordinary  years,  The  lunation  constants  given  previously 
(with  whole  weeks  eliminated)  provide  the  weekday  displacement,  which  are  added  to  the 
epochal  molad: 

Days-Hours-Ha/aMm 

19-year  cycles  303  x  2-16-0595  =  2-22-1005 

ordinary  years  2  X  4-08-0876  =  1-17-0672 

leap  years  0  x  5-21-0589  =  0-00-0000 

epochal  molad  2-05-0204 
Tishri  molad,  A.M.  5760  6-21-0801 

Since  the  molad  occurs  on  day  6,  dehiyyah  (a)  causes  Tishri  1  to  be  postponed  to  day  7. 
It  may  be  noted  that  dehiyyah  (b)  would  also  cause  a  postponement  of  one  day,  since  the 
molad  occurs  after  18  hours.  Dehiyyah  (a)  takes  precedence,  however. 


12.312  Reasons  for  the  Dehiyyot  Dehiyyah  (a)  prevents  Hoshana  Rabba  (Tishri 
21)  from  occurring  on  the  Sabbath  and  prevents  Yom  Kippur  (Tishri  10)  from 
occurring  on  the  day  before  or  after  the  Sabbath. 

Dehiyyah  (b)  is  an  artifact  of  the  ancient  practice  of  beginning  each  month  with 
the  sighting  of  the  lunar  crescent.  It  is  assumed  that  if  the  molad  (i.e.,  the  mean 
conjunction)  occurs  after  noon,  the  lunar  crescent  cannot  be  sighted  until  after 
6  P.M.,  which  will  then  be  on  the  following  day.  (For  further  information  about 
visibility  of  the  lunar  crescent,  see  Section  12.411.) 

Dehiyyah  (c)  prevents  an  ordinary  year  from  exceeding  355  days.  If  the  Tishri 
molad  of  an  ordinary  year  occurs  on  Tuesday  at  or  after  3:11:20  A.M.,  the  next 
Tishri  molad  will  occur  at  or  after  noon  on  Saturday.  According  to  dehiyyah  (b), 
Tishri  1  of  the  next  year  must  be  postponed  to  Sunday,  which  by  dehiyyah  (a) 
occasions  a  further  postponement  to  Monday.  This  results  in  an  ordinary  year  of 
356  days.  Postponing  Tishri  1  from  Tuesday  to  Thursday  produces  a  year  of  354 
days. 

Dehiyyah  (d)  prevents  a  leap  year  from  falling  short  of  383  days.  If  the  Tishri 
molad  following  a  leap  year  is  on  Monday,  at  or  after  9:32:43  1/3  A.M.,  the  previ- 
ous Tishri  molad  (thirteen  months  earlier)  occurred  on  Tuesday  at  or  after  noon. 
Therefore,  by  dehiyyot  (b)  and  (a),  Tishri  1  beginning  the  leap  year  was  postponed 
to  Thursday.  To  prevent  a  leap  year  of  382  days,  dehiyyah  (d)  postpones  by  one 
day  the  beginning  of  the  ordinary  year. 

A  thorough  discussion  of  both  the  functional  and  religious  aspects  of  the  de- 
hiyyot is  provided  by  Cohen  (1981). 


588  EXPLANATORY  SUPPLEMENT 

12.313  Determining  the  Length  of  the  Year  An  ordinary  year  consists  of  50  weeks 
plus  3,  4,  or  5  days.  The  number  of  excess  days  identifies  the  year  as  being  deficient  , 
regular,  or  complete,  respectively.  A  leap  year  consists  of  54  weeks  plus  5,  6,  or  7 
days,  which  again  are  designated  deficient,  regular,  or  complete,  respectively.  The 
length  of  a  year  can  therefore  be  determined  by  comparing  the  weekday  of  Tishri 
1  with  that  of  the  next  Tishri  1. 

First  consider  an  ordinary  year.  The  weekday  shift  after  twelve  lunations  is 
04-08-876.  For  example  if  a  Tishri  molad  of  an  ordinary  year  occurs  on  day  2  at 
0  hours  0  halakim  (6  p.m.  on  Monday),  the  next  Tishri  molad  will  occur  on  day 
6  at  8  hours  876  halakim.  The  first  Tishri  molad  does  not  require  application  of 
the  dehiyyot,  so  Tishri  1  occurs  on  day  2.  Because  of  dehiyyah  (a),  the  following 
Tishri  1  is  delayed  by  one  day  to  day  7,  five  weekdays  after  the  previous  Tishri  1. 
Since  this  characterizes  a  complete  year,  the  months  of  Heshvan  and  Kislev  both 
contain  30  days. 

The  weekday  shift  after  thirteen  lunations  is  05-21-589.  If  the  Tishri  molad 
of  a  leap  year  occurred  on  day  4  at  20  hours  500  halakim,  the  next  Tishri  molad 
will  occur  on  day  3  at  18  hours  9  halakim.  Because  of  dehiyyot  (b),  Tishri  1  of  the 
leap  year  is  postponed  two  days  to  day  6.  Because  of  dehiyyah  (c),  Tishri  1  of  the 
following  year  is  postponed  two  days  to  day  5.  This  six-day  difference  characterizes 
a  regular  year,  so  that  Heshvan  has  29  days  and  Kislev  has  30  days. 

1 2.32    History  of  the  Hebrew  Calendar 

The  codified  Hebrew  calendar  as  we  know  it  today  is  generally  considered  to  date 
from  a.m.  4119  (+359),  though  the  exact  date  is  uncertain.  At  that  time  the  pa- 
triarch Hillel  II,  breaking  with  tradition,  disseminated  rules  for  calculating  the 
calendar.  Prior  to  that  time  the  calendar  was  regarded  as  a  secret  science  of  the 
religious  authorities.  The  exact  details  of  Hillel's  calendar  have  not  come  down  to 
us,  but  it  is  generally  considered  to  include  rules  for  intercalation  over  nineteen-year 
cycles.  Up  to  the  tenth  century  A.D.,  however,  there  was  disagreement  about  the 
proper  years  for  intercalation  and  the  initial  epoch  for  reckoning  years. 

Information  on  calendrical  practices  prior  to  Hillel  is  fragmentary  and  often 
contradictory.  The  earliest  evidence  indicates  a  calendar  based  on  observations  of 
Moon  phases.  Since  the  Bible  mentions  seasonal  festivals,  there  must  have  been 
intercalation.  There  was  likely  an  evolution  of  conflicting  calendrical  practices. 

The  Babylonian  exile,  in  the  first  half  of  the  sixth  century  B.C.,  greatly  influ- 
enced the  Hebrew  calendar.  This  is  visible  today  in  the  names  of  the  months.  The 
Babylonian  influence  may  also  have  led  to  the  practice  of  intercalating  leap  months. 

During  the  period  of  the  Sanhedrin,  a  committee  of  the  Sanhedrin  met  to 
evaluate  reports  of  sightings  of  the  lunar  crescent.  If  sightings  were  not  possible, 
the  new  month  was  begun  30  days  after  the  beginning  of  the  previous  month. 
Decisions  on  intercalation  were  influenced,  if  not  determined  entirely,  by  the  state 


12  /  CALENDARS  ggg 

of  vegetation  and  animal  life.  Although  eight-year,  nineteen-year,  and  longer-period 
intercalation  cycles  may  have  been  instituted  at  various  times  prior  to  Hillel  II,  there 
is  little  evidence  that  they  were  employed  consistently  over  long  time  spans. 
For  information  on  the  seven-day  week,  see  Section  12.12. 


12.4   THE  ISLAMIC  CALENDAR 

The  Islamic  calendar  is  a  purely  lunar  calendar  in  which  months  correspond  to  the 
lunar  phase  cycle.  As  a  result,  the  cycle  of  twelve  lunar  months  regresses  through 
the  seasons  over  a  period  of  about  33  years.  For  religious  purposes,  Muslims  begin 
the  months  with  the  first  visibility  of  the  lunar  crescent  after  conjunction.  For  civil 
purposes  a  tabulated  calendar  that  approximates  the  lunar  phase  cycle  is  often 
used. 

The  seven-day  week  is  observed  with  each  day  beginning  at  sunset.  Weekdays 
are  specified  by  number,  with  day  1  beginning  at  sunset  on  Saturday  and  ending 
at  sunset  on  Sunday.  Day  5,  which  is  called  Jum'a,  is  the  day  for  congregational 
prayers.  Unlike  the  Sabbath  days  of  the  Christians  and  Jews,  however,  Juma  is  not 
a  day  of  rest.  Jum'a  begins  at  sunset  on  Thursday  and  ends  at  sunset  on  Friday. 


12.41  Rules 

Years  of  twelve  lunar  months  are  reckoned  from  the  Era  of  the  Hijra,  commem- 
orating the  migration  of  the  Prophet  and  his  followers  from  Mecca  to  Medina. 
This  epoch,  1  a.h.  (Anno  Higerae)  Muharram  1,  is  generally  taken  by  astronomers 
(Neugebauer.  1975)  to  be  Thursday,  +622  July  15  (Julian  calendar).  This  is  called 
the  astronomical  Hijra  epoch.  Chronological  tables  (e.g.,  Mayr  and  Spuler,  1961; 
Freeman-Grenville,  1963)  generally  use  Friday,  July  16,  which  is  designated  the  civil 
epoch.  In  both  cases  the  Islamic  day  begins  at  sunset  of  the  previous  day. 

For  religious  purposes,  each  month  begins  in  principle  with  the  first  sighting 
of  the  lunar  crescent  after  the  New  Moon.  This  is  particularly  important  for  es- 
tablishing the  beginning  and  end  of  Ramadan.  Because  of  uncertainties  due  to 
weather,  however,  a  new  month  may  be  declared  thirty  days  after  the  beginning  of 
the  preceding  month.  Although  various  predictive  procedures  have  been  used  for 
determining  first  visibility  (see  Section  12.411),  they  have  always  had  an  equivocal 
status.  In  practice,  there  is  disagreement  among  countries,  religious  leaders,  and 
scientists  about  whether  to  rely  on  observations,  which  are  subject  to  error,  or  to 
use  calculations,  which  may  be  based  on  poor  models. 

Chronologists  employ  a  thirty-year  cyclic  calendar  in  studying  Islamic  history. 
In  this  tabular  calendar,  there  are  eleven  leap  years  in  the  thirty-year  cycle.  Odd- 
numbered  months  have  thirty  days  and  even-numbered  months  have  twenty-nine 


590 


EXPLANATORY  SUPPLEMENT 


Table  12.41.1 

Months  of  Tabular  Islamic  Calendar 


1 

I . 

Muharram^ 

7. 

riajau1 

30 

2. 

Safar 

29 

8. 

Sha'ban 

29 

3. 

Rabi'a  I 

30 

9. 

Ramadan* 

30 

4. 

Rabi'a  II 

29 

10. 

Shawwal 

29 

5. 

Jumada  I 

30 

11. 

Dhu  ai-Q  adah5 

30 

6. 

Jumada  II 

29 

12. 

Dhu  al-HijjahS 

29* 

*  In  a  leap  year,  Dhu  al-Hijjah  has  30  days. 
§  Holy  months, 
t  Month  of  fasting. 


days,  with  a  thirtieth  day  added  to  the  twelfth  month,  Dhu  al-Hijjah  (see  Ta- 
ble 12.41.1).  Years  2,  5,  7,  10,  13,  16,  18,  21,  24,  26,  and  29  of  the  cycle  are  des- 
ignated leap  years.  This  type  of  calendar  is  also  used  as  a  civil  calendar  in  some 
Muslim  countries,  though  other  years  are  sometimes  used  as  leap  years.  The  mean 
length  of  the  month  of  the  thirty-year  tabular  calendar  is  about  2.9  seconds  less 
than  the  synodic  period  of  the  Moon. 

12.411  Visibility  of  the  Crescent  Moon  Under  optimal  conditions,  the  crescent 
Moon  has  been  sighted  about  15.4  hours  after  the  astronomical  New  Moon  (i.e., 
conjunction)  (Schaefer,  1988).  Usually,  however,  it  is  not  seen  until  it  is  more  than 
twenty-four  hours  old.  Babylonian  astronomers  were  the  first  to  develop  methods 
for  calculating  first  visibility,  though  no  surviving  tables  are  explicitly  concerned 
with  this  (Neugebauer,  1975:  533-540).  The  earliest  known  visibility  tables  are  by 
ahKhwarizmi,  a  nineth-century  astronomer  of  Baghdad  (King,  1987).  These  tables, 
and  many  subsequent  tables,  were  based  on  the  Indian  criterion  that  the  Moon  will 
be  visible  if  the  local  hour  angle  of  the  Moon  at  sunset  is  equal  to  or  less  than 
78°.  With  the  development  of  Islamic  astronomy,  more  complex  criteria  were  also 
developed  by  Muslim  astronomers. 

Modern  models  for  predicting  first  visibility  incorporate  celestial  mechanics, 
spherical  astronomy,  selenology,  atmospheric  physics,  and  ophthalmology.  Bruin 
(1977)  was  the  first  to  prepare  such  a  model.  Ilyas  (1984),  recognizing  that  the 
Islamic  calendar  is  used  around  the  world,  introduced  the  concept  of  an  "Inter- 
national Lunar  Dateline,"  west  of  which  the  Moon  should  be  visible  under  good 
observing  conditions.  Further  theoretical  work  has  been  done  by  Schaefer  (1988). 
Extensive  observing  programs  have  been  organized  by  Doggett,  Seidelmann,  and 
Schaefer  (1988)  and  Doggett  and  Schaefer  (1989). 


12  /  CALENDARS 

1 2.42   History  of  the  Islamic  Calendar 


591 


The  form  of  the  Islamic  calendar,  as  a  lunar  calendar  without  intercalation,  was  laid 
down  by  the  Prophet  in  the  Qur'an  (Sura  IX,  verse  36-37)  and  in  his  sermon  at  the 
Farewell  Pilgrimage.  This  was  a  departure  from  the  lunisolar  calendar  commonly 
used  in  the  Arab  world,  in  which  months  were  based  on  first  sightings  of  the  lunar 
crescent,  but  an  intercalary  month  was  added  as  deemed  necessary. 

Caliph  'Umar  I  is  credited  with  establishing  the  Hijra  Era  in  A.H.  17.  It  is  not 
known  how  the  initial  date  was  determined.  However,  calculations  show  that  the 
astronomical  New  Moon  (i.e.,  conjunction)  occurred  on  +622  July  14  at  0444  UT 
(assuming  AT1  =1.0  hour),  so  that  sighting  of  the  crescent  most  likely  occurred  on 
the  evening  of  July  16. 

12.5   THE  INDIAN  CALENDAR 

As  a  result  of  a  calendar  reform  in  A.D.  1957,  the  National  Calendar  of  India 
is  a  formalized  lunisolar  calendar  in  which  leap  years  coincide  with  those  of  the 
Gregorian  calendar  (Calendar  Reform  Committee,  1957).  However,  the  initial  epoch 
is  the  Saka  Era,  a  traditional  epoch  of  Indian  chronology.  Months  are  named  after 
the  traditional  Indian  months  and  are  offset  from  the  beginning  of  Gregorian  months 
(see  Table  12.51.1). 

In  addition  to  establishing  a  civil  calendar,  the  Calendar  Reform  Committee 
set  guidelines  for  religious  calendars,  which  require  calculations  of  the  motions  of 
the  Sun  and  Moon.  Tabulations  of  the  religious  holidays  are  prepared  by  the  India 
Meteorological  Department  and  published  annually  in  The  Indian  Astronomical 
Ephemeris. 

Despite  the  attempt  to  establish  a  unified  calendar  for  all  of  India,  many  local 
variations  exist.  The  Gregorian  calendar  continues  in  use  for  administrative  pur- 
poses, and  holidays  are  still  determined  according  to  regional,  religious,  and  ethnic 
traditions  (Chatterjee,  1987). 

12.51    Rules  for  Civil  Use 

Years  are  counted  from  the  Saka  Era;  1  Saka  is  considered  to  begin  with  the  vernal 
equinox  of  A.D.  79.  The  reformed  Indian  calendar  began  with  Saka  Era  1879,  Caitra 
1,  which  corresponds  to  A.D.  1957  March  22.  Normal  years  have  365  days;  leap 
years  have  366.  In  a  leap  year,  an  intercalary  day  is  added  to  the  end  of  Caitra.  To 
determine  leap  years,  first  add  78  to  the  Saka  year.  If  this  sum  is  evenly  divisible  by 
4,  the  year  is  a  leap  year,  unless  the  sum  is  a  multiple  of  100.  In  the  latter  case,  the 
year  is  not  a  leap  year  unless  the  sum  is  also  a  multiple  of  400.  Table  12.51.1  gives 
the  sequence  of  months  and  their  correlation  with  the  months  of  the  Gregorian 
calendar. 


592 


EXPLANATORY  SUPPLEMENT 


Table  12.51.1 

Months  of  the  Indian  Civil  Calendar 


Days  per  Month 

Correlation  of  Indian  and  Gregorian  Months 

1 

I  - 

Caitra 

30" 

Caitra  1 

March  22" 

o 
£. 

VdlodPM  let 

11 

O  I 

Vaisakha  1 

April  21 

3. 

Jyaistha 

31 

Jyaistha  1 

May  £.2. 

A 
**. 

A  cqH ha 

11 

O  I 

Asadha  1 

June  22 

5. 

Sravana 

31 

Sravana  1 

July  23 

6. 

Bhadra 

31 

Bhadra  1 

August  23 

7. 

Asvina 

30 

Asvina  1 

September  23 

8. 

Kariika 

30 

Kartika  1 

October  23 

9. 

Agrahayana 

30 

Agrahayana  1 

November  22 

10. 

Pausa 

30 

Pausa  1 

December  22 

11. 

Magha 

30 

Magha  1 

January  21 

12. 

Phalguna 

30 

Phalguna  1 

February  20 

"In  a  leap  year,  Caitra  has  31  days  and  Caitra  T  coincides  with  March  21 . 


A  seven-day  week,  exactly  correlated  with  the  western  week,  is  kept.  Days  run 
from  midnight  to  midnight. 

1 2.52   Principles  of  the  Religious  Calendar 

Religious  holidays  are  determined  by  a  lunisolar  calendar  that  is  based  on  calcula- 
tions of  the  actual  positions  of  the  Sun  and  Moon.  Most  holidays  occur  on  specified 
lunar  dates  (titkis),  as  is  explained  later;  a  few  occur  on  specified  solar  dates.  The 
calendrical  methods  presented  here  are  those  recommended  by  the  Calendar  Re- 
form Committee  (1957).  They  serve  as  the  basis  for  the  calendar  published  in  The 
Indian  Astronomical  Ephemeris.  However,  many  local  calendar  makers  continue  to 
use  traditional  astronomical  concepts  and  formulas,  some  of  which  date  back  1500 
years. 

The  Calendar  Reform  Committee  attempted  to  reconcile  traditional  calendri- 
cal practices  with  modern  astronomical  concepts.  According  to  their  proposals, 
precession  is  accounted  for  and  calculations  of  solar  and  lunar  position  are  based 
on  accurate  modern  methods.  All  astronomical  calculations  are  performed  with 
respect  to  a  Central  Station  at  longitude  82°30'  East,  latitude  23°  11'  North.  For 
religious  purposes  solar  days  are  reckoned  from  sunrise  to  sunrise. 

A  solar  month  is  denned  as  the  interval  required  for  the  Sun's  apparent  longi- 
tude to  increase  by  30°,  corresponding  to  the  passage  of  the  Sun  through  a  zodiacal 
sign  (rasi).  The  initial  month  of  the  year,  Vaisakha,  begins  when  the  true  longitude 
of  the  Sun  is  23°  15'  {see  Table  12.52.1).  Because  the  Earth's  orbit  is  elliptical,  the 
lengths  of  the  months  vary  from  29.2  to  31.2  days.  The  short  months  all  occur  in 
the  second  half  of  the  year  around  the  time  of  the  Earth's  perihelion  passage. 


12  /  CALENDARS 


593 


Table  12.52.1 

Solar  Months  of  the  Indian  Religious  Calendar 


Sun's  Longitude    Approximate  Approximate 
at  Beginning         Duration  Gregorian 
of  Month  of  Month  Date 


d 

1. 

Vaisakha 

23 

15 

30.9 

Apr.  13 

2. 

Jyestha 

53 

15 

31.3 

May  14 

3. 

Asadha 

83 

15 

31.5 

June  14 

4. 

Sravana 

113 

15 

31.4 

July  16 

5. 

Bhadrapada 

143 

15 

31.0 

Aug.  16 

6. 

Asvina 

173 

15 

30.5 

Sept  16 

7. 

Kartika 

203 

15 

30.0 

Oct.  1 7 

8. 

Margasirsa 

233 

15 

29.6 

Nov.  16 

9. 

Pausa 

263 

15 

29.4 

Dec.  15 

10. 

Magha 

293 

15 

29.5 

Jan.  14 

11. 

Phalguna 

323 

15 

29.9 

Feb.  12 

12. 

Caitra 

353 

15 

30.3 

Mar.  14 

Lunar  months  are  measured  from  one  New  Moon  to  the  next  (although  some 
groups  reckon  from  the  Full  Moon).  Each  lunar  month  is  given  the  name  of  the 
solar  month  in  which  the  lunar  month  begins.  Because  most  lunations  are  shorter 
than  a  solar  month,  there  is  occasionally  a  solar  month  in  which  two  New  Moons 
occur.  In  this  case,  both  lunar  months  bear  the  same  name,  but  the  first  month 
is  described  with  the  prefix  adhika,  or  intercalary.  Such  a  year  has  thirteen  lunar 
months.  Adhika  months  occur  every  two  or  three  years  following  patterns  described 
by  the  Metonic  cycle  or  more  complex  lunar  phase  cycles. 

More  rarely,  a  year  will  occur  in  which  a  short  solar  month  will  pass  without 
having  a  New  Moon.  In  that  case,  the  name  of  the  solar  month  does  not  occur  in 
the  calendar  for  that  year.  Such  a  decayed  (ksaya)  month  can  occur  only  in  the 
months  near  the  Earth's  perihelion  passage.  In  compensation,  a  month  in  the  first 
half  of  the  year  will  have  had  two  New  Moons,  so  the  year  will  still  have  twelve 
lunar  months.  Ksaya  months  are  separated  by  as  few  as  nineteen  years  and  as  many 
as  141  years. 

Lunations  are  divided  into  30  tithis,  or  lunar  days.  Each  tithi  is  defined  by  the 
time  required  for  the  longitude  of  the  Moon  to  increase  by  12°  over  the  longitude  of 
the  Sun.  Thus  the  length  of  a  tithi  may  vary  from  about  20  hours  to  nearly  27  hours. 
During  the  waxing  phases,  tithis  are  counted  from  1  to  15  with  the  designation 
Sukla.  Tithis  for  the  waning  phases  are  designated  Krsna  and  are  again  counted 
from  1  to  15.  Each  day  is  assigned  the  number  of  the  tithi  in  effect  at  sunrise. 
Occasionally  a  short  tithi  will  begin  after  sunrise  and  be  completed  before  the  next 


594 


EXPLANATORY  SUPPLEMENT 


sunrise.  Similarly  a  long  tithi  may  span  two  sunrises.  In  the  former  case,  a  number 
is  omitted  from  the  day  count.  In  the  latter,  a  day  number  is  carried  over  to  a 
second  day. 

1 2.53   History  of  the  Indian  Calendar 

The  history  of  calendars  in  India  is  a  remarkably  complex  subject  owing  to  the 
continuity  of  Indian  civilization  and  to  the  diversity  of  cultural  influences.  In  the 
mid-1950s,  when  the  Calendar  Reform  Committee  made  its  survey,  there  were  about 
30  calendars  in  use  for  setting  religious  festivals  for  Hindus,  Buddhists,  and  Jain- 
ists.  Some  of  these  were  also  used  for  civil  dating.  These  calendars  were  based 
on  common  principles,  though  they  had  local  characteristics  determined  by  long- 
established  customs  and  the  astronomical  practices  of  local  calendar  makers.  In 
addition,  Muslims  in  India  used  the  Islamic  calendar,  and  the  Indian  government 
used  the  Gregorian  calendar  for  administrative  purposes. 

Early  allusions  to  a  hmisolar  calendar  with  intercalated  months  are  found  in  the 
hymns  from  the  Rig  Veda,  dating  from  the  second  millennium  B.C.  Literature  from 
1300  B.C.  to  A.D.  300,  provides  information  of  a  more  specific  nature.  A  five-year 
hmisolar  calendar  coordinated  solar  years  with  synodic  and  sidereal  lunar  months. 

Indian  astronomy  underwent  a  general  reform  in  the  first  few  centuries  A.D., 
as  advances  in  Babylonian  and  Greek  astronomy  became  known.  New  astronom- 
ical constants  and  models  for  the  motion  of  the  Moon  and  Sun  were  adapted  to 
traditional  calendric  practices.  This  was  conveyed  in  astronomical  treatises  of  this 
period  known  as  Siddhantas,  many  of  which  have  not  survived.  The  Surya  Sid- 
dhanta,  which  originated  in  the  fourth  century  but  was  updated  over  the  following 
centuries,  influenced  Indian  calendrics  up  to  and  even  after  the  calendar  reform  of 
A..D.  1957. 

Pingree  (1978)  provides  a  survey  of  the  development  of  mathematical  astron- 
omy in  India.  Although  he  does  not  deal  explicitly  with  calendrics,  this  material  is 
necessary  for  a  full  understanding  of  the  history  of  India's  calendars. 

12.6   THE  CHINESE  CALENDAR 

The  Chinese  calendar  is  a  hmisolar  calendar  based  on  calculations  of  the  positions 
of  the  Sun  and  Moon.  Months  of  29  or  30  days  begin  on  days  of  astronomical  New 
Moons,  with  an  intercalary  month  being  added  every  two  or  three  years.  Since  the 
calendar  is  based  on  the  true  positions  of  the  Sun  and  Moon,  the  accuracy  of  the 
calendar  depends  on  the  accuracy  of  the  astronomical  theories  and  calculations. 

Although  the  Gregorian  calendar  is  used  in  the  Peoples'  Republic  of  China 
for  administrative  purposes,  the  traditional  Chinese  calendar  is  used  for  setting 
traditional  festivals  and  for  timing  agricultural  activities  in  the  countryside.  The 
Chinese  calendar  is  also  used  by  Chinese  communities  around  the  world. 


12  /  CALENDARS 


595 


Table  12.61.1 

Chinese  Sexagenary  Cycle  of  Days  and  Years 


Celestial  Stems       Earthly  Branches 


1 . 

jia 

1. 

zi 

rat 

2. 

yi 

2. 

chou 

ox 

3. 

bing 

3. 

yin 

tiger 

4. 

ding 

4. 

mao 

hare 

5. 

wu 

5. 

chen 

dragon 

6. 

ji 

6. 

si 

snake 

7. 

geng 

7. 

wu 

horse 

8. 

xin 

8. 

wei 

sheep 

9. 

ren 

9. 

shen 

monkey 

10. 

gui 

10. 

you 

fowl 

11. 

xu 

dog 

12. 

hai 

pig 

Year  Names 


1. 

jia-zi 

16. 

ji-mao 

31. 

jia-wu 

46. 

ji-you 

2. 

yi-chou 

17. 

geng-chen 

32, 

yi-wei 

47. 

geng-xu 

3. 

bing-yin 

18. 

xin-si 

33. 

bing-shen 

48. 

xin-hai 

4. 

ding-rrtao 

19. 

ren-wu 

34. 

ding-you 

49. 

ren-zi 

5. 

wu-chen 

20. 

gui-wei 

35. 

wu-xu 

50. 

gui-chou 

6. 

ji-si 

21. 

jia-shen 

36. 

ji-hai 

51. 

jia-yin 

7. 

geng-wu 

22. 

yi-you 

37. 

geng-zi 

52. 

yi-mao 

8. 

xin-wei 

23. 

bing-xu 

38. 

xin-chou 

53. 

bing-chen 

9. 

ren-shen 

24. 

ding-hai 

39. 

ren-yin 

54. 

ding-si 

10. 

gui-you 

25. 

wu-zi 

40. 

gui-mao 

55. 

wu-wu 

11. 

jia-xu 

26. 

ji-chou 

41. 

jia-chen 

56. 

ji-wei 

12. 

yi-hai 

27. 

geng-yin 

42. 

yi-si 

57. 

geng-shen 

13. 

bing-zi 

28. 

xin-mao 

43. 

bing-wu 

58. 

xin-you 

14. 

ding-chou 

29. 

ren-chen 

44. 

ding-wei 

59. 

ren-xu 

15. 

wu-yin 

30. 

gui-si 

45. 

wu-shen 

60. 

gui-hai 

12.61  Rules 

There  is  no  specific  initial  epoch  for  counting  years.  In  historical  records,  dates  were 
specified  by  counts  of  days  and  years  in  sexagenary  cycles  and  by  counts  of  years 
from  a  succession  of  eras  established  by  reigning  monarchs  (see  Section  12.62). 

The  sixty- year  cycle  consists  of  a  set  of  year  names  that  are  created  by  pairing  a 
name  from  a  list  of  ten  Celestial  Stems  with  a  name  from  a  list  of  twelve  Terrestrial 
Branches,  following  the  order  specified  in  Table  12.61.1.  The  Celestial  Stems  are 
specified  by  Chinese  characters  that  have  no  English  translation;  the  Terrestrial 
Branches  are  named  after  twelve  animals.  After  six  repetitions  of  the  set  of  stems 
and  five  repetitions  of  the  branches,  a  complete  cycle  of  pairs  is  completed  and 


596  EXPLANATORY  SUPPLEMENT 

a  new  cycle  begins.  The  initial  year  (jia-zi)  of  the  current  cycle  began  on  1984 
February  2. 

Days  are  measured  from  midnight  to  midnight.  The  first  day  of  a  calendar 
month  is  the  day  on  which  the  astronomical  New  Moon  (i.e.,  conjunction)  is  cal- 
culated to  occur.  Since  the  average  interval  between  successive  New  Moons  is  ap- 
proximately 29.53  days,  months  are  29  or  30  days  long.  Months  are  specified  by 
number  from  1  to  12.  When  an  intercalary  month  is  added,  it  bears  the  number 
of  the  previous  month,  but  is  designated  as  intercalary.  An  ordinary  year  of  twelve 
months  is  353,  354,  or  355  days  in  length;  a  leap  year  of  thirteen  months  is  383, 
384,  or  385  days  long. 

The  conditions  for  adding  an  intercalary  month  are  determined  by  the  occur- 
rence of  the  New  Moon  with  respect  to  divisions  of  the  tropical  year.  The  tropical 
year  is  divided  into  24  solar  terms,  in  15°  segments  of  solar  longitude.  These  di- 
visions are  paired  into  twelve  Sectional  Terms  (Jieqi)  and  twelve  Principal  Terms 
(Zhongqi),  as  shown  in  Table  12.61.2.  These  terms  are  numbered  and  assigned 
names  that  are  seasonal  or  meteorological  in  nature.  For  convenience  in  the  ex- 
amples that  follow,  the  Sectional  and  Principal  Terms  are  denoted  by  S  and  P, 
respectively,  followed  by  the  number.  Because  of  the  ellipticity  of  the  Earth's  orbit, 
the  interval  between  solar  terms  varies  with  the  seasons. 

Reference  works  give  a  variety  of  rules  for  establishing  New  Year's  Day  and 
for  intercalation  in  the  lunisolar  calendar.  Since  the  calendar  was  originally  based 
on  the  assumption  that  the  Sun's  motion  was  uniform  through  the  seasons,  the 
published  rules  are  frequently  inadequate  to  handle  special  cases. 

The  following  rules  (Liu  and  Stephenson,  in  press)  are  currently  used  as  the 
basis  for  calendars  prepared  by  the  Purple  Mountain  Observatory  (1984): 

(1)  The  first  day  of  the  month  is  the  day  on  which  the  New  Moon  occurs. 

(2)  An  ordinary  year  has  twelve  lunar  months;  an  intercalary  year  has  thirteen 
lunar  months. 

(3)  The  Winter  Solstice  (term  P-ll)  always  falls  in  month  11. 

(4)  In  an  intercalary  year,  a  month  in  which  there  is  no  Principal  Term  is 
the  intercalary  month.  It  is  assigned  the  number  of  the  preceding  month, 
with  the  further  designation  of  intercalary.  If  two  months  of  an  intercalary 
year  contain  no  Principal  Term,  only  the  first  such  month  after  the  Winter 
Solstice  is  considered  intercalary. 

(5)  Calculations  are  based  on  the  meridian  120°  East. 

The  number  of  the  month  usually  corresponds  to  the  number  of  the  Principal 
Term  occurring  during  the  month.  In  rare  instances,  however,  there  are  months  that 
have  two  Principal  Terms,  with  the  result  that  a  nonintercalary  month  will  have 
no  Principal  Term.  As  a  result  the  numbers  of  the  months  will  temporarily  fail  to 
correspond  to  the  numbers  of  the  Principal  Terms.  These  cases  can  be  resolved  by 
strictly  applying  rules  2  and  3.  The  second  example  deals  with  such  a  case. 


12  /  CALENDARS 


597 


Table  12.61.2 

Chinese  Solar  Terms 


TT&rm* 

Noma 

Sun  s 

L_uiiy  1  LUUC 

tjutiyoridii  usiQ 

Approximate 
Duration 

o—  l 

- 

ucnun 

Beginning  of  Spring 

olb 

r&D.  4 

r— 1 

Yushui 

Rain  Water 

330 

Feb.  19 

29.8 

o— Z. 

Jingzho 

Waking  of  Insects 

345 

Mar.  6 

Chun  fen 

Spring  Equinox 

0 

Mar.  21 

30.2 

b— J 

Qingming 

Pure  Brightness 

15 

Apr.  5 

r— o 

Guyu 

Grain  Rain 

30 

Apr.  20 

30.7 

O — 4 

Lixia 

Beginning  of  Summer 

May  b 

D  A 

r— 4 

Xiaoman 

urain  hull 

60 

May  21 

31.2 

o  c 
O— D 

Mangzhong 

Grain  in  Ear 

75 

June  6 

r— 0 

xiazni 

Summer  Solstice 

90 

June  22 

31.4 

b-  b 

Xiaoshu 

Slight  Heat 

105 

July  7 

r  — D 

Dashu 

threat  Heat 

120 

1.  . t. .  rin 

July  23 

31.4 

Q  "7 
o— / 

Licfiu 

Beginning  of  Autumn 

1 35 

Aug.  8 

P— 7 

Chushu 

Limit  of  Heat 

150 

Aug.  23 

31.1 

o— 8 

Baifu 

White  Dew 

165 

Sept.  8 

D  O 

r— o 

Qiufen 

Autumnal  Equinox 

180 

Sept.  23 

30.7 

b-9 

Hanfu 

Gold  Dew 

195 

Oct.  8 

P-9 

Shuangjiang 

Descent  of  Frost 

210 

Oct.  24 

30.1 

S-10 

Lidong 

Beginning  of  Winter 

225 

Nov.  8 

P-10 

Xiaoxue 

Slight  Snow 

240 

Nov.  22 

29.7 

S-11 

Daxue 

Great  Snow 

255 

Dec.  7 

p-11 

Dongzhi 

Winter  Solstice 

270 

Dec.  22 

29.5 

S-12 

Xiaohan 

Slight  Cold 

285 

Jan.  6 

P-12 

Dahan 

Great  Cold 

300 

Jan.  20 

29.5 

*  Terms  are  classified  as  Sectional  [Jieqi)  or  Principal  (Zhongqi).  followed  by  the  number  of  the  term. 


Example  1    (typical  case):  Find  the  Gregorian  date  of  Chinese  New  Year  in  A.D.  1991. 

The  Winter  Solstice  (Principal  Term  11)  occurs  on  1990  December  22,  and  the  New  Moon 
which  occurs  on  or  prior  to  that  date  is  on  December  17.  Hence  we  compile  the  following 
table  of  phenomena: 


New  Moon 

1990  Dec  17 

month  11 

P-ll 

Dec  22 

Winter  Solstice 

S-12 

Jan  6 

New  Moon 

1991  Jan  16 

month  12 

P-12 

Jan  20 

S-l 

Feb  4 

New  Moon 

Feb  15 

month  1 

P-l 

Feb  19 

S-2 

Mar  6 

New  Moon 

Mar  16 

month  2 

598  EXPLANATORY  SUPPLEMENT 

Thus  Chinese  New  Year  occurs  on  February  15.  There  are  no  intercalary  months  during 
this  interval. 


Example  2  (extraordinary  case):  Find  the  Gregorian  date  of  Chinese  New  Year  in  A.D. 
1985.  Both  the  Winter  Solstice  and  a  New  Moon  occur  on  1984  December  22, 


New  Moon 

1984  Dec  22 

month  11 

P-ll 

Dec  22 

Winter  Solstice 

S-12 

1985  Jan  5 

P-12 

Jan  20 

New  Moon 

Jan  21 

month  12? 

6-1 

Feb  4 

P-l 

Feb  19 

New  Moon 

Feb  20 

month  12  Intercalary? 

S— 2 

Mar  5 

New  Moon 

Mar  21 

month  1? 

P-2 

Mar  21 

The  first  sign  of  difficulty  is  that  month  11  has  both  Principal  Terms  11  and  12.  We  will 
also  see  that  the  month  beginning  on  February  20  cannot  be  intercalary.  This  is  discovered 
by  finding  the  next  Winter  Solstice,  which  must  occur  in  month  11  and  by  checking  the 
number  of  New  Moons.  In  1985,  P-ll  occurs  on  December  22,  and  the  New  Moon  that 
begins  month  11  occurs  on  December  12,  Working  backward,  we  find  New  Moons  in  1985 
on  November  13,  October  14,  September  15,  August  16,  July  18,  June  18,  May  20,  April 
20,  March  21,  February  20,  and  January  21.  Since  there  are  only  twelve  New  Moons  from 
month  11  in  1984  to  month  11  in  1985,  there  is  no  room  for  an  intercalary  month.  So  the 
correct  sequence  of  months  is  as  follows: 


New  Moon 

1984  Dec  22 

month  11 

P-ll 

Dec  22 

Winter  Solstice 

S-12 

1985  Jan  5 

P-12 

Jan  20 

New  Moon 

Jan  21 

month  12 

S-l 

Feb  4 

P-l 

Feb  19 

New  Moon 

Feb  20 

month  1 

S-2 

Mar  5 

New  Moon 

Mar  21 

month  2 

P-2 

Mar  21 

Chinese  New  Year  therefore  occurs  on  1985  February  20. 


In  general,  the  first  step  in  calculating  the  Chinese  calendar  is  to  check  for 
■the  existence  of  an  intercalary  year.  This  can  be  done  by  determining  the  dates  of 
Winter  Solstice  and  month  11  before  and  after  the  period  of  interest,  and  then  by 
counting  the  intervening  New  Moons. 


12  /  CALENDARS  5gg 

Published  calendrical  tables  are  often  in  disagreement  about  the  Chinese  calen- 
dar. Some  of  the  tables  are  based  on  mean,  or  at  least  simplified,  motions  of  the  Sun 
and  Moon.  Some  are  calculated  for  other  meridians  than  120°  East.  Some  incor- 
porate a  rule  that  the  eleventh,  twelfth,  and  first  months  are  never  followed  by  an 
intercalary  month.  This  is  sometimes  not  stated  as  a  rule,  but  as  a  consequence  of 
the  rapid  change  in  the  Sun's  longitude  when  the  Earth  is  near  perihelion.  However, 
this  statement  is  incorrect  when  the  motions  of  the  Sun  and  Moon  are  accurately 
calculated. 


12.62   History  of  the  Chinese  Calendar 

In  China  the  calendar  was  a  sacred  document,  sponsored  and  promulgated  by  the 
reigning  monarch.  For  more  than  two  millennia,  a  Bureau  of  Astronomy  made  as- 
tronomical observations,  calculated  astronomical  events  such  as  eclipses,  prepared 
astrological  predictions,  and  maintained  the  calendar  (Needham,  1959).  After  all, 
a  successful  calendar  not  only  served  practical  needs,  but  also  confirmed  the  con- 
sonance between  Heaven  and  the  imperial  court. 

Analysis  of  surviving  astronomical  records  inscribed  on  oracle  bones  reveals  a 
Chinese  lunisolar  calendar,  with  intercalation  of  lunar  months,  dating  back  to  the 
Shang  dynasty  of  the  fourteenth  century  B.C.  Various  intercalation  schemes  were 
developed  for  the  early  calendars,  including  the  nineteen- year  and  76-year  lunar 
phase  cycles  that  came  to  be  known  in  the  West  as  the  Metonic  cycle  and  Callipic 
cycle. 

From  the  earliest  records,  the  beginning  of  the  year  occurred  at  a  New  Moon 
near  the  winter  solstice.  The  choice  of  month  for  beginning  the  civil  year  varied 
with  time  and  place,  however.  In  the  late  second  century  B.C.,  a  calendar  reform 
established  the  practice,  which  continues  today,  of  requiring  the  winter  solstice  to 
occur  in  month  11.  This  reform  also  introduced  the  intercalation  system  in  which 
dates  of  New  Moons  are  compared  with  the  24  solar  terms  (see  Section  12.61). 
However,  calculations  were  based  on  the  mean  motions  resulting  from  the  cyclic 
relationships.  Inequalities  in  the  Moon's  motions  were  incorporated  as  early  as  the 
seventh  century  A.D.  (Sivin,  1969),  but  the  Sun's  mean  longitude  was  used  for 
calculating  the  solar  terms  until  1644  {Liu  and  Stephenson,  in  press). 

Years  were  counted  from  a  succession  of  eras  established  by  reigning  emperors. 
Although  the  accession  of  an  emperor  would  mark  a  new  era,  an  emperor  might 
also  declare  a  new  era  at  various  times  within  his  reign.  The  introduction  of  a 
new  era  was  an  attempt  to  reestablish  a  broken  connection  between  Heaven  and 
Earth,  as  personified  by  the  emperor.  The  break  might  be  revealed  by  the  death 
of  an  emperor,  the  occurrence  of  a  natural  disaster,  or  the  failure  of  astronomers 
to  predict  a  celestial  event  such  as  an  eclipse.  In  the  latter  case,  a  new  era  might 
mark  the  introduction  of  new  astronomical  or  calendrical  models. 


600  EXPLANATORY  SUPPLEMENT 

Sexagenary  cycles  were  used  to  count  years,  months,  days,  and  fractions  of  a  day 
using  the  set  of  Celestial  Stems  and  Terrestrial  Branches  described  in  Section  12.61. 
Use  of  the  sixty-day  cycle  is  seen  in  the  earliest  astronomical  records.  By  contrast 
the  sixty-year  cycle  was  introduced  in  the  first  century  A.D.  or  possibly  a  century 
earlier  {Tung,  1960;  Needham,  1959).  Although  the  day  count  has  fallen  into  disuse 
in  everyday  life,  it  is  still  tabulated  in  calendars.  The  initial  year  (jia-zi)  of  the 
current  year  cycle  began  on  1984  February  2,  which  is  the  third  day  (bing-yin)  of 
the  day  cycle. 

Western  (pre-Copernican)  astronomical  theories  were  introduced  to  China  by 
Jesuit  missionaries  in  the  seventeenth  century.  Gradually,  more  modern  Western 
concepts  became  known.  Following  the  revolution  of  1911,  the  traditional  practice 
of  counting  years  from  the  accession  of  an  emperor  was  abolished. 

12.7  JULIAN  DAY  NUMBERS  AND  JULIAN  DATE 

The  system  of  Julian  day  numbers  is  a  continuous  count  of  days  elapsed  since  the 
beginning  of  the  Julian  period  as  defined  by  the  sixteenth-century  chronologist  J. 
J.  Scaliger  (see  Section  12.14).  Although  Scaliger's  original  idea  was  to  introduce 
a  count  of  years,  nineteenth-century  astronomers  adapted  this  system  to  create  a 
count  of  days.  John  Herschel  (1849)  thoroughly  explained  the  system  and  provided 
a  table  of  "Intervals  in  Days  between  the  Commencement  of  the  Julian  Period,  and 
that  of  some  other  remarkable  chronological  and  astronomical  Eras." 

Julian  day  0  commenced  at  Greenwich  noon  on  —4712  January  1,  Julian  pro- 
leptic  calendar  (see  Section  12.8).  The  Julian  day  number,  expressed  as  an  integer, 
denotes  the  number  of  complete  days  elapsed  since  the  initial  epoch.  The  Julian 
date  (JD)  specifies  a  particular  instant  of  a  day  by  ending  the  Julian  day  number 
with  a  decimal  fraction.  For  example,  the  Julian  day  number  of  1990  June  25  is  244 
8068,  whereas  the  Julian  date  at  noon  is  2448068.0.  The  midnight  that  begins  the 
civil  day  is  specified  by  subtracting  0.5  from  the  Julian  date  at  noon. 

A  count  of  days  (1-365)  from  the  beginning  of  the  year  is  sometimes  a  useful 
tool  for  record- keeping.  However,  the  dubious  practice  of  calling  this  a  Julian  date 
merely  causes  confusion  with  Julian  day  numbers. 

12.8  THE  JULIAN  CALENDAR 

The  Julian  calendar,  introduced  by  Julius  Caesar  in  —45,  was  a  solar  calendar  with 
months  of  fixed  lengths.  Every  fourth  year  an  intercalary  day  was  added  to  maintain 
synchrony  between  the  calendar  year  and  the  tropical  year.  It  served  as  a  standard 
for  European  civilization  until  the  Gregorian  Reform  of  +1582. 

Today  the  principles  of  the  Julian  calendar  continue  to  be  used  by  chronologist  s. 
The  Julian  proleptic  calendar  is  formed  by  applying  the  rules  of  the  Julian  calendar 


12  /  CALENDARS  gQI 

to  times  before  Caesar's  reform.  This  provides  a  simple  chronological  system  for 
correlating  other  calendars  and  serves  as  the  basis  for  the  Julian  day  numbers 
(Section  12.7)  . 


12.81  Rules 

Years  are  classified  as  normal  years  of  365  days  and  leap  years  of  366  days.  Leap 
years  occur  in  years  that  are  evenly  divisible  by  4.  For  this  purpose,  year  0  (or  1 
B.C.,  see  Section  12.14)  is  considered  evenly  divisible  by  4.  The  year  is  divided  into 
twelve  formalized  months  that  were  eventually  adopted  for  the  Gregorian  calendar. 


1 2.82   History  of  the  Julian  Calendar 

The  year  —45  has  been  called  the  "year  of  confusion,"  because  in  that  year  Julius 
Caesar  inserted  90  days  to  bring  the  months  of  the  Roman  calendar  back  to  their 
traditional  place  with  respect  to  the  seasons.  This  was  Caesar's  first  step  in  replacing 
a  calendar  that  had  gone  badly  awry.  Although  the  pre-Julian  calendar  was  lunisolar 
in  inspiration,  its  months  no  longer  followed  the  lunar  phases  and  its  year  had  lost 
step  with  the  cycle  of  seasons  (see  Michels,  1967;  Bickerman,  1974).  Following  the 
advice  of  Sosigenes,  an  Alexandrine  astronomer,  Caesar  created  a  solar  calendar 
with  twelve  months  of  fixed  lengths  and  a  provision  for  an  intercalary  day  to  be 
added  every  fourth  year.  As  a  result,  the  average  length  of  the  Julian  calendar  year 
was  365.25  days.  This  is  consistent  with  the  length  of  the  tropical  year  as  it  was 
known  at  the  time. 

Following  Caesar's  death,  the  Roman  calendrical  authorities  misapplied  the 
leap-year  rule,  with  the  result  that  every  third,  rather  than  every  fourth,  year 
was  intercalary.  Although  detailed  evidence  is  lacking,  it  is  generally  believed  that 
Emperor  Augustus  corrected  the  situation  by  omitting  intercalation  from  the  Julian 
years  —8  through  +4.  After  this  the  Julian  calendar  finally  began  to  function  as 
planned. 

Through  the  Middle  Ages  the  use  of  the  Julian  calendar  evolved  and  acquired 
local  peculiarities  that  continue  to  snare  the  unwary  historian.  There  were  variations 
in  the  initial  epoch  for  counting  years,  the  date  for  beginning  the  year,  and  the 
method  of  specifying  the  day  of  the  month.  Not  only  did  these  vary  with  time  and 
place,  but  also  with  purpose.  Different  conventions  were  sometimes  used  for  dating 
ecclesiastical  records,  fiscal  transactions,  and  personal  correspondence. 

Caesar  designated  January  1  as  the  beginning  of  the  year.  However,  other  con- 
ventions flourished  at  different  times  and  places.  The  most  popular  alternatives 
were  March  1,  March  25,  and  December  25.  This  continues  to  cause  problems  for 
historians,  since,  for  example,  +998  February  28  as  recorded  in  a  city  that  began 
its  year  on  March  1,  would  be  the  same  day  as  +999  February  28  of  a  city  that 
began  the  year  on  January  1. 


602 


EXPLANATORY  SUPPLEMENT 


Table  12.82.1 

Roman  Dating  in  the  Julian  Calendar 


January 

March 

April 

August 

February 

May 

June 

December 

July 

September 

October 

November 

1 

Kalends 

Kalends 

Kalends 

Kalends 

2 

IV 

IV 

VI 

IV 

3 

III 

III 

V 

III 

4 

II 

II 

IV 

II 

5 

Nones 

Nones 

III 

Nones 

6 

VIII 

VIII 

II 

VIII 

7 

VII 

VII 

Nones 

VII 

8 

VI 

VI 

VIII 

VI 

9 

V 

V 

VII 

V 

10 

IV 

IV 

VI 

IV 

11 

III 

III 

V 

III 

12 

II 

II 

IV 

II 

13 

Ides 

Ides 

ill 

Ides 

14 

XIX 

XVI 

II 

XVIII 

15 

XVIII 

XV 

Ides 

XVII 

16 

XVII 

XIV 

XVII 

XVI 

17 

XVI 

XIII 

XVI 

XV 

18 

XV 

XII 

XV 

XIV 

19 

XIV 

XI 

XIV 

XIII 

20 

XIII 

X 

XIII 

XII 

21 

XII 

IX 

XII 

XI 

22 

XI 

VIII 

XI 

X 

23 

X 

VII 

X 

IX 

24 

IX 

VI 

IX 

VIII 

25 

VIII 

V 

VIII 

VII 

26 

VII 

IV 

VII 

VI 

27 

VI 

III 

VI 

V 

28 

V 

II 

V 

IV 

29 

IV 

IV 

III 

30 

III 

III 

II 

31 

II 

II 

Days  within  the  month  were  originally  counted  from  designated  division  points 
within  the  month:  Kalends,  Nones,  and  Ides.  The  Kalends  is  the  first  day  of  the 
month.  The  Ides  is  the  thirteenth  of  the  month,  except  in  March,  May,  July,  and 
October,  when  it  is  the  fifteenth  day.  The  Nones  is  always  eight  days  before  the  Ides 
(see  Table  12.82.1).  Dates  falling  between  these  division  points  are  designated  by 
counting  inclusively  backward  from  the  upcoming  division  point.  Intercalation  was 


12  /  CALENDARS  gQg 

performed  by  repeating  the  day  VI  Kalends  March,  i.e.,  inserting  a  day  between  VI 
Kalends  March  (February  24)  and  VII  Kalends  March  (February  23). 

By  the  eleventh  century,  consecutive  counting  of  days  from  the  beginning  of 
the  month  came  into  use.  Local  variations  continued,  however,  including  counts  of 
days  from  dates  that  commemorated  local  saints.  The  inauguration  and  spread  of 
the  Gregorian  calendar  resulted  in  the  adoption  of  a  uniform  standard  for  recording 
dates. 

Cappelli  (1930),  Grotefend  and  Grotefend  (1941),  and  Cheney  (1945)  offer  guid- 
ance through  the  maze  of  medieval  dating. 

12.9    CALENDAR  CONVERSION  ALGORITHMS 

Conversion  between  calendar  systems  is  perhaps  most  easily  and  generally  accom- 
plished by  use  of  Julian  day  numbers.  For  calendars  based  on  fixed,  consistent 
rules,  calendar  dates  can  be  converted  to  Julian  day  numbers  and  Julian  day  num- 
bers to  calendar  dates.  Tables  for  this  purpose  were  prepared  by  Harvey  (1983).  A 
generalized  set  of  algorithms  was  prepared  by  Hatcher  (1985).  Parisot  (1986)  has 
contributed  parameters  for  Hatcher's  algorithms  for  a  few  additional  calendars. 

The  algorithms  given  in  this  section  do  not  conform  to  Hatcher's  general  system 
but  were  inspired  by  the  algorithms  created  by  Fliegel  and  Van  Flandern  (1968) 
for  conversion  between  Gregorian  calendar  dates  and  Julian  day  numbers.  Other, 
possibly  more  efficient,  formulations  are  possible.  Integer  arithmetic  is  exclusively 
used  in  this  algorithms;  i.e.,  the  remainders  of  all  divisions  are  dropped. 

Julian  day  numbers  run  from  noon  to  noon.  Thus  a  calculated  Julian  day 
number  pertains  to  the  noon  occurring  in  the  corresponding  calendar  date.  The 
notation  is: 

JD     =     Julian  day  number 
Y      =    calendar  year 
M      =  month 
D      =    day  of  month 

All  variables  are  integer.  Since  Julian  day  numbers  for  current  times  consist  of  seven 
digits,  a  word  size  of  at  least  four  bytes  is  required  to  use  these  algorithms. 

12.91    Converting  Day  of  the  Week 

A  problem  common  to  several  of  the  calendars  is  computing  the  day  of  the  week. 
The  following  formula  gives  the  day  of  the  week  for  the  Julian  day  number  that 
pertains  at  noon.  Given:  JD.  Compute:  Day  of  week,  /,  where  /  runs  from  1  though 
7,  with  1  being  Sunday. 


/  =  JD  -  7  x  ((JD+  l)/7)  +  2 


(12.91-1) 


604 


EXPLANATORY  SUPPLEMENT 


Example  1    Compute  the  day  of  the  week  of  JD  2451545. 

/=  245 1 545  -  7  x  ((245 1 545  +  1 )  /  7)  +  2 
=  2451545  -7  x  350220  +  2 

=  7 

Therefore  JD  2451545  is  Saturday. 


12.92   Converting  between  Gregorian  Calendar  Date  and  Julian  Day  Number 

These  algorithms  by  Fliegel  and  Van  Flandern  (1968)  are  valid  for  all  Gregorian 
calendar  dates  corresponding  to  JD  >  0,  i.e.,  dates  after  —4713  November  23.  Given: 
Y,  M,  D.  Compute:  JD. 

JD  =  (1461  x  <Y  +  4800  +  (M-  14)/  12))/4  +  (367  x  (M  -  2  -  12  x  ((M  -  14)/ 12)))/  12 
-  (3  x  07  +  4900  +  CM  -  14)  / 12)  / 100))  I4  +  D-  32075  (12.92-1) 


Given:  JD.  Compute:  Y,  M,  D, 


JD  +  68569 
(4  xL)l 146097 
L  -  (146097  x  N  +  3)/  4 
(4000x(L+l))/  1461001 
£-(1461  x/)/4  +  31 
(80  x  L)  1 2447 
L  -  (2447  x  J)  I  80 
J I  11 

7  +  2-  12xL 
100x(A/-49)  +  /+L 


(12.92-2) 


L  = 
N  = 
L  = 
1  = 
L  = 
7  = 
D  = 
L  = 
M  = 
Y  = 


1 2.93   Converting  Between  Islamic  Tabular  Calendar  Date 
and  Julian  Day  Number 

While  the  religious  calendar  is  based  on  first  sighting  of  the  lunar  crescent  after 
New  Moon,  various  tabular  calendars  have  been  used.  In  the  system  most  often 
used  by  historians,  years  2,  5,  7,  10,  13,  16,  18,  21,  24,  26,  and  29  of  a  30-year 
cycle  are  designated  leap  years.  The  following  algorithms  are  valid  for  values  of 
Y  >  1  and  JD  >  JD0,  where  Y  is  the  year  of  the  Hijra  era  and  JD0  is  the  Julian 
day  number  of  the  Hijra  epoch.  Two  different  initial  epochs  have  been  used  for 


12  /  CALENDARS  QQ5 

the  Islamic  calendar  (see  Section  12.41).  If  the  astronomical  epoch  is  preferred,  in 
which  A.H.  1  Muharram  1  corresponds  to  a.d.  622  July  15,  then  JD0  =  1948439 
should  be  used  in  the  equations  below;  if  the  civil  epoch  is  preferred,  in  which  A.H. 
1  Muharram  1  corresponds  to  +622  July  16,  use  JD0  =  1948440.  Given:  Y,  M,  D. 
Compute:  JD. 

JD  =  (1 1  x  y  +  3)  /  30  +  354  xY+ 30  xM-(M-  l)/2+D  +  JD0  -  385  (12.93-1) 

Given:  JD.  Compute:  Y,  M,  D. 

L  =  JD  -  JD0  +  10632 

N  ~(L—  1)/  10631 

L  =  L     10631  xN+  354 

7  sa  ((10985  —  L)  /  53 16)  x  ((50  xL)  I  17719)  +  (L  /  5670)  x  ((43  xL)l  15238) 
L  =  L-  ((30-/)/  15)x  ((17719x7)/ 50)  -  (7/  16)  x  ((15238  x  7)  /  43)  +  29 
M  =  (24  x  L)  1 709 
D  -  L  -  (709  x  M)  I  24 

T  =  30xA/  +  /-  30  (12.93-2) 


12.94  Converting  between  Indian  Civil  Calendar  and  Julian  Day  Number 

These  algorithms  are  for  the  civil  calendar  recommended  by  the  Calendar  Reform 
Committee  of  India.  Years  are  counted  from  the  Saka  Era.  The  algorithms  are  valid 
for  all  values  of  Y  >  1 ,  where  Y  is  the  year  reckoned  from  the  Saka  Era,  and  JD  > 
1749995.  Given:  7,  M,  D.  Compute:  JD. 

JD  =  365  xy  +  (K+78-  }/M)/4  +  3\  xM-(M  +  9)/ll  -(M  !l)x{M  -1) 

-(3x((F  +  78-  1  !M)1 100+  1))/ 4  +D+  1749579  (12.94-1) 

Given:  JD.  Compute:  Y,  M,  D. 

L  =  JD  +  68518 

N  =  (4  x  L)  1 146097 

L  =  L    (146097  x/V+3)/4 

/=  (4000  x  (L+  1))/  1461001 

L  =  7-(1461  x/)/4+  1 

J  ={{L—  l)/31)x(l  —  Li  185)  +  (Z./185)x((L-  156)  /  30  +  5)  -  L 1 366 
D  =  L  -  31  x  7  +  ((7  +  2)  /  8)  x  (7  -  5) 


606  EXPLANATORY  SUPPLEMENT 
1  =  1/  11 

M  =  J  +  2-  \2xL 

Y  =  100x(Af-49)+L  +  /-78  (12.94-2) 


12.95   Converting  between  Julian  Calendar  Date  and  Julian  Day  Number 

These  algorithms  are  valid  for  all  values  of  Y  >  —4712,  i.e.,  for  all  dates  with  JD  > 
0.  The  formula  for  computing  JD  from  Y,  M,  D  was  constructed  by  Fliegel  (1990)  as 
an  entry  in  "The  Great  Julian  Day  Contest,"  held  at  the  Jet  Propulsion  Laboratory 
in  1970.  Given:  Y,  M,  D.  Compute:  JD. 

JD  =  367  xY  —  (7  X(Y+  500 1  +  (Af  —  9)  /  7))  /  4  +  (275  x  M)  1 9  +  D  +  1 729777 

Given:  JD.  Compute:  Y,  M,  D. 


J  = 

JD  +  1402 

K  = 

(J-  1)/ 1461 

L  = 

J  -  1461  xK 

N  = 

(L-  1)/  365  —  LI  1461 

1  = 

£,-365  XA/  +  30 

7  = 

(80  X/)/ 2447 

D  = 

/  -  (2447  x  J)  1 80 

1  = 

J 1  11 

M  = 

J  +  2-  12x1 

y  = 

4x£  +  A/  +  /-4716 

12.10  REFERENCES 

REFERENCES 

Aveni,  A.F.  (1989).  Empires  of  Time  New  York. 

Bates,  R.S.  (1952).  "Give  Us  Back  Our  Fortnight"  Sky  and  Telescope  11,  267-268. 
Bickerman,  E.J.  (1974).  Chronology  of  the  Ancient  World  (Ithaca). 

Bruin,  F.  (1977).  "The  First  Visibility  of  the  Lunar  Crescent"  Vistas  in  Astronomy  21, 
331-358. 

Calendar  Reform  Committee  (1955).  Report  of  the  Calendar  Reform  Committee  (New 
Delhi). 

Cappelli,  A.  (1930).  Cronologia,  Cronografia  e  Calendario  perpetuo  Milan. 
Cassini,  J.  (1740).  Tables  astronomiques  du  Soleil,  de  la  Lune...,  Paris. 
Chapront-Touze,  M.  and  Chapront,  J.  (1988).  "ELP  2000-85:  a  Semi-Analytical  Lunar 
Ephemeris  Adequate  for  Historical  Times"  Astron.  Astrophys.  190,  342-352. 


12  /  CALENDARS 


607 


Chatterjee,  S.K.  (1987).  'Indian  Calendars"  in  History  of  Oriental  Astronomy  G.  Swarup 

et  al,  eds.  Cambridge,  pp.  91-95 
Cheney,  C.R.  (1945).  A  Handbook  of  Dates  for  Students  of  English  History  London. 
Cohen,  J.R.  (1981).  Mishnah  Tractate  Rosh  Hashanah  New  York. 

Colgrave,  B.  and  Mynors,  R.A.B.  (1969).  Bede's  Ecclesiastical  History  of  the  English  Peo- 
ple Oxford. 
Colson,  F.H.  (1926).  The  Week  Cambridge. 

Coyne,  G.V.,  Hoskin,  M.A.,  and  Pedersen,  O.,  eds.  (1983).  Gregorian  Reform  of  the  Cal- 
endar Vatican  City. 

Doggett,  L.E.  and  B.E.  Schaefer  (1989).  "Results  of  the  July  Moonwatch"  Sky  &  Telescope 
77,  373-375. 

Doggett,  L.E.,  Seidelmann,  P.K.,  and  Schaefer,  B.E.  (1988).  "Moonwatch — July  14,  1988" 

Sky  &  Telescope  76,  34-35. 
Encyclopedia  of  Religion  and  Ethics  (1910). 

Fliegel,  H.F.  and  Van  Flandern,  T.C.  (1968).  "A  Machine  Algorithm  for  Processing  Cal- 
endar Dates"  Communications  of  the  Association  of  Computing  Machines  11,  657. 
Fliegel,  H.F.  (1990).  Personal  communication. 

Fotheringham,  J.K.  (1934).  "The  Calendar"  in  The  Nautical  Almanac  1935  London, 
Fraser,  J.T.  (1987).  Time;  the  Familiar  Stranger  Amherst. 

Freeman-Grenville,  G.S.P.  (1963).  The  Muslim  and  Christian  Calendars  London. 

Gandz,  S.  (1949).  "The  Origin  of  the  Planetary  Week  or  the  Planetary  Week  in  Hebrew 
Literature"  Proceedings  of  the  American  Academy  for  Jewish  Research  18,  213-254. 

Gingerich,  O.  (1983).  "The  Civil  Reception  of  the  Gregorian  Calendar"  in  Gregorian  Re- 
form of  the  Calendar  Coyne,  G.V.,  Hoskin,  M.A.,  and  Pedersen,  O.,  eds.,  Vatican 
City,  pp.  265-279. 

Ginzel,  F.K.  (1906,  1911).  Handbuch  der  Mathematischen  und  Technischen  Chronologie 
Leipzig. 

Grotefend,  H.  and  Grotefend,  O.  (1941).  Taschenbuch  der  Zeitrechnung  des  deutschen 
Mittelalters  und  der  Neuzeit  Hannover. 

Harvey,  O.L.  (1983).  Calendar  Conversions  by  Way  of  the  Julian  Day  Number  Philadel- 
phia. 

Hatcher,  D.A.  (1985).  "Generalized  Equations  for  Julian  Day  Numbers  and  Calendar 

Dates"  Quarterly  Journal  of  the  Royal  Astronomical  Society  26,  151-155. 
Herschel,  J.F.W.  (1849).  Outlines  of  Astronomy  pp.  633-637. 

Hoskin,  M.  (1983).  "The  Reception  of  the  Calendar  by  Other  Churches"  in  Gregorian 
Reform  of  the  Calendar  Coyne,  G.V.,  Hoskin,  M.A.,  and  Pedersen,  O.,  eds.,  Vatican 
City,  pp.  255-264. 

Ilyas,  M.  (1984).  A  Modem  Guide  to  Astronomical  Calculations  of  Islamic  Calendar, 

Times  and  Qibla  Kuala  Lumpur. 
King,  D.A.  (1987).  "Some  Early  Islamic  Tables  for  Determining  Lunar  Crescent  Visibility" 

From  Deferent  to  Equant:  A  Volume  of  Studies  in  the  History  of  Science  in  the  Ancient 

and  Medieval  Near  East  in  Honor  of  E.S.  Kennedy  King,  D.A.  and  Saliba,  G.,  eds. 

Annals  of  the  New  York  Academy  of  Sciences,  500,  New  York. 
Laskar,  J.  (1986).  "Secular  Terms  of  Classical  Planetary  Theories  Using  the  Results  of 

General  Relativity"  Astron.  Astrophys.  157,  59-70. 
Liu  Baolin  and  Stephenson,  F.R,  "The  Chinese  Calendar  and  Its  Operational  Rules"  In 

press. 

MacNeill,  M.  (1982).  The  Festival  of  Lughnasa  Dublin. 

Mayr,  J.  and  Spuler,  B.  (1961).  Wiistenfeld-Maler'sche  Vergleichungs-Tabellen,  Wiesbaden. 


608 


EXPLANATORY  SUPPLEMENT 


Michels,  A.K.  (1967).  The  Calendar  of  the  Roman  Republic  Westport. 

Neugebauer,  O.  (1975).  A  History  of  Ancient  Mathematical  Astronomy  Part  HI,  New  York. 

Parise,  F.  (1982).  The  Book  of  Calendars  New  York. 

Parisot,  J. P.  (1986).  "Additif  to  the  Paper  of  D.A.  Hatcher:  'Generalized  Equations  for  Ju- 
lian Day  Numbers  and  Calendar  Dates'"  Quarterly  Journal  of  the  Royal  Astronomical 
Society  27,  206-507. 

Pingree,  D.  (1978).  "History  of  Mathematical  Astronomy  in  India"  Dictionary  of  Scientific 

Biography  XV,  New  York,  pp.  533-633. 
Purple  Mountain  Observatory  (1984).  The  Newly  Compiled  Perpetual  Chinese  Calendar 

(1840-2050)  (Popular  Science  Publishing  House,  Beijing). 
Oudin,  J.-M.  (1940).  "Etude  sur  la  Date  de  Paques"  Bull.  Astronomique  (2)  12,  391-410. 
Resnikoff,  L.A.  (1943).  "Jewish  Calendar  Calculations"  Scripta  Mathematica  9,  191-195, 

274-277. 

Scaliger,  J.J.  (1583).  De  emendatione  temporum  Paris. 

Schaefer,  B.E.  (1988).  "Visibility  of  the  Lunar  Crescent"  Q.  Jour.  R.A.S.  29,  511-523. 
Sivin,  N.  (1969).  Cosmos  and  Computation  in  Early  Chinese  Mathematical  Astronom-y 
Leiden. 

Spier,  A.  (1952).  The  Comprehensive  Hebrew  Calendar  New  York. 

Tung  Tso-Pin  (1960).  Chronological  Tables  of  Chinese  History  Hong  Kong. 

Welch,  W.C.  (1957).  Chinese-American  Calendar  for  the  40th  through  the  89th  Year  of 

the  Chinese  Republic  Washington. 
Zerubavel,  E.  (1985).  The  Seven  Day  Circle  New  York. 


CHAPTER 


Historical  Information 

compiled  by  J.  Weeks 


13.1    HISTORY  OF  THE  ALMANACS 

From  earliest  times  humans  have  been  interested  in  the  Sun,  Moon,  planets,  and 
stars,  and  in  determining  their  positions.  In  particular,  they  are  interested  in  pre- 
dicting the  positions  of  solar-system  bodies  and  interesting  phenomena,  such  as 
eclipses,  planetary  groupings  and  directions,  and  times  of  rising  and  setting.  The 
results  of  these  interests  were  numerous  mathematical  approaches  to  the  calcula- 
tions, observations  of  limited  accuracy,  and  attempts  to  predict  the  positions  of  the 
"wandering"  objects. 

Eventually  national  publications  of  epheinerides  appeared  in  various  countries: 
in  France,  the  Connaissance  des  Temps  (1679);  in  England,  The  Nautical  Alma- 
nac and  Astronomical  Ephemeris  (1767);  in  Germany,  the  Berliner  Astronomisches 
Jahrbuch  (1776);  in  Spain,  the  Ephemerides  Astronomicas  (1791);  in  the  United 
States,  The  American  Ephemeris  and  Nautical  Almanac  (1855);  in  the  Soviet  Union, 
the  Astronomical  Yearbook  of  the  USSR  (1923);  in  Japan,  the  Japanese  Ephemeris 
(1943);  and  in  India,  the  Indian  Ephem.eris  and  Nautical  Almanac  (1958).  Initially, 
these  publications  were  based  on  various  theories  of  the  motions  of  the  bodies,  differ- 
ent astronomical  constants,  different  geographical  coordinate  systems,  and  different 
timescales. 

International  cooperation  led  to  the  use  of  standard  reference  systems,  systems 
of  constants,  and  common  timescales.  The  brief  histories  that  follow  are  concerned 
with  the  major  changes  of  form  and  content. 

^^0V> t/ioyiovv>i'c  e>< 

13.11    The  American  Ephemeris 

"The  Commissioners  of  Longitude,  in  pursuance  of  the  Powers  vested  in 
them  by  a  late  Act  of  Parliament,  present  the  Publick  with  the  NAUTI- 
CAL ALMANAC  and  ASTRONOMICAL  EPHEMERIS  for  the  Year  1767, 

609 


610  EXPLANATORY  SUPPLEMENT 

to  be  continued  annually;  a  Work  which  must  greatly  contribute  to  the  Im- 
provement of  Astronomy,  Geography,  and  Navigation.  This  EPHEMERIS 
contains  every  Thing  essential  to  general  Use  that  is  to  be  found  in  any 
Ephemeris  hitherto  published,  with  many  other  useful  and  interesting  Par- 
ticulars never  yet  offered  to  the  Publick  in  any  Work  of  this  Kind.  The 
Tables  of  the  Moon  had  been  brought  by  the  late  Professor  MAYER  of  Got- 
tingen  to  a  sufficient  Exactness  to  determine  the  Longitude  at  Sea,  within  a 
Degree,  as  appeared  by  the  Trials  of  several  Persons  who  made  Use  of  them. 
The  Difficulty  and  Length  of  the  necessary  Calculations  seemed  the  only 
Obstacles  to  hinder  them  from  becoming  of  general  Use:  To  remove  which 
this  EPHEMERIS  was  made;  the  Mariner  being  hereby  relieved  from  the 
Necessity  of  calculating  the  Moon's  Place  from  the  Tables,  and  afterwards 
computing  the  Distance  to  Seconds  by  Logarithms,  which  are  the  principal 
and  only  very  delicate  Part  of  the  Calculus;  so  that  the  finding  the  Longi- 
tude by  the  Help  of  the  EPHEMERIS  is  now  in  a  Manner  reduced  to  the 
Computation  of  the  Time,  an  Operation..." 

"All  the  Calculations  of  the  EPHEMERIS  relating  to  the  Sun  and 
Moon  were  made  from  Mr.  MAYER'S  last  manuscript  Tables,  received  by 
the  Board  of  Longitude  after  his  Decease,  which  have  been  printed  under  my 
Inspection,  and  will  be  published  shortly.  The  Calculations  of  the  Planets 
were  made  from  Dr.  HALLEY'S  Tables;  and  those  of..." 

These  extracts  from  the  preface  to  the  first  edition  of  The  Nautical  Almanac 
and  American  Ephemeris  (1767)  were  written  by  Nevil  Maskelyne,  then  Astronomer 
Royal.  The  main  incentive  for,  and  the  main  emphasis  of,  the  publication  was 
the  determination  of  longitude  at  sea  using  the  method  of  lunar  distances.  The 
ephemerides  were  all  given  in  terms  of  apparent  solar  time,  for  the  reasons  given  in 
the  book's  Explanation: 

"It  may  be  proper  first  to  premise,  that  all  the  Calculations  are  made 
according  to  apparent  Time  by  the  Meridian  of  the  Royal  Observatory  at 
Greenwich." 

"What  has  been  shown  concerning  the  Equation  of  Time  chiefly  re- 
spects the  Astronomer,  the  Mariner  having  little  to  do  with  it  in  computing 
his  Longitude  from  the  Moon's  Distances  from  the  Sun  and  Stars  observed 
at  Sea  with  the  Help  of  the  Ephemeris,  all  the  Calculations  thereof  being 
adapted  to  apparent  Time,  the  same  which  he  will  obtain  by  the  Altitudes 
of  the  Sun  or  Stars  in  the  Manner  hereafter  prescribed." 

"But  if  Watches  made  upon  Mr.  John  Harrison's  or  other  equivalent 
Principles  should  be  brought  into  Use  at  Sea,  the  apparent  Time,  deduced 
from  an  Altitude  of  the  Sun  must  be  corrected  by  the  Equation  of  Time, 
and  the  mean  Time  found  compared  with  that  shewn  by  the  Watch,  the 


13  /  HISTORICAL  INFORMATION  g-|  -j 

Difference  will  be  the  Longitude  in  Time  from  the  Meridian  by  which  the 
Watch  was  set;  as  near  as  the  Going  of  the  Watch  can  be  depended  upon." 

Apart  from  many  changes  in  the  sources  of  the  data  in  the  tables  from  which  the 
Moon's  position  was  calculated,  the  main  pages  of  the  Almanac  remained  essentially 
unchanged  until  1834.  For  that  year,  to  quote  from  the  preface: 

"The  NAUTICAL  ALMANAC  and  ASTRONOMICAL  EPHEMERIS  for 
the  Year  1834,  has  been  constructs ed  in  strict  conformity  with  the  rec- 
ommendations of  the  ASTRONOMICAL  SOCIETY  of  LONDON,  as  con- 
tained in  their  Report. . .;  and  will,  it  is  believed,  be  found  to  contain  almost 
every  aid  that  the  Navigator  and  Astronomer  can  require." 

The  changes  were  both  fundamental  and  substantial,  and  almost  doubled  the 
size  of  the  book.  The  most  fundamental  change  was  to  replace  apparent  time  as  the 
argument  of  the  ephemerides  with  mean  time.  In  the  words  of  the  report: 

"The  attention  of  the  Committee  was,  in  the  first  instance,  directed  to  a 
subject  of  general  importance,  as  affecting  almost  all  the  results  in  the 
Nautical  Almanac;  viz.,  whether  the  quantities  therein  inserted  should  in 
future  be  given  for  apparent  time  (as  heretofore),  or  for  mean  solar  time. 
Considering  that  the  latter  is  the  most  convenient,  not  only  for  every  pur- 
pose of  Astronomy,  but  also  (from  the  best  information  they  have  been  able 
to  obtain)  for  all  the  purposes  of  Navigation;  at  the  same  time  that  it  is 
less  laborious  to  the  computer,  and  has  already  been  introduced  with  good 
effect  into  the  national  Ephemerides  of  Coimbra  and  Berlin,  the  Committee 
recommend  the  abolition  of  the  use  of  apparent  time  in  all  the  computations 
of  the  Nautical  Almanac;  excepting..." 

The  recognition  of  the  importance  of  practical  astronomy  also  played  a  role,  as 
noted  in  the  report: 

"And  here  perhaps  it  may  be  proper  to  remark,  that,  although  in  these 
discussions  the  Committee  have  constantly  kept  in  view  the  principal  object 
for  which  the  Nautical  Almanac  was  originally  formed,  viz,  the  promotion 
and  advancement  of  nautical  astronomy,  they  have  not  been  unmindful 
that,  by  a  very  slight  extension  of  the  computations,  and  by  a  few  additional 
articles  (of  no  great  expense  or  labour) ,  the  work  might  be  rendered  equally 
useful  for  all  the  purposes  of  practical  astronomy." 


The  requirements  of  the  navigator  were  by  no  means  overlooked;  in  particular, 
the  number  and  presentation  of  "lunar  distances,"  including  distances  from  the 


g-|2  EXPLANATORY  SUPPLEMENT 

planets,  was  greatly  improved.  However,  a  completely  new  explanation  was  written 
in  which  little  reference  was  made  to  the  use  of  the  ephemerides  for  navigation. 
Tables  of  refraction  were  excluded  and  no  example  was  given  of  clearing  an  observed 
lunar  distance  for  the  effects  of  semidiameter,  parallax,  and  refraction. 

Apart  from  the  omission  of  lunar  distances  in  1907,  the  first  part  of  the  almanac, 
containing  the  ephemerides  of  the  Sun  and  Moon,  remained  unchanged  in  form 
until  1931.  From  time  to  time,  the  data  was  based  on  different  data  and  tables, 
and  occasionally  new  material  was  added,  such  as  ephemerides  of  the  Moon  and 
planets  at  transit  on  the  Greenwich  meridian  and  the  apparent  places  of  many 
more  stars.  Later,  ephemerides  for  physical  observations  were  included;  and  in  1929, 
anticipating  the  redesign  in  1931,  ephemerides  of  the  Sun  referred  to  the  standard 
equinox  of  1950.0  were  given  for  the  years  1928  and  1929. 

Much  of  the  added  matter  was  of  no  interest  to  the  practical  navigator.  In 
1896,  "Part  I  (containing  such  data  as  are  more  particular  required  for  navigational 
purposes)"  was  "also  published  separately  for  the  convenience  of  sailors."  This 
consisted  of  a  straight  reprint  of  the  monthly  pages  comprising  the  first  part  of 
the  almanac,  with  selections  from  the  other  data  and  a  few  specially  prepared 
pages.  In  the  Preface  to  the  1914  edition,  it  was  announced  briefly  that  "Part  I  has 
been  remodeled  for  the  convenience  of  sailors" ;  thus  was  introduced  The  Nautical 
Almanac,  Abridged  for  the  Use  of  Seamen,  which  was  specially  designed  for  its 
purpose.  This  almanac  was  redesigned  in  1929  and  in  1952,  when  it  was  renamed 
The  Abridged  Nautical  Almanac;  it  was  rearranged  in  a  different  form  in  1958.  Since 
1960,  it  takes  on  the  appropriate  portion  of  the  original  title,  namely  The  Nautical 
Almanac. 

Prior  to  the  revision  in  1931,  a  fundamental  change  in  the  measure  of  mean 
solar  time  had  taken  place,  which  required  changes  in  the  almanac.  Before  1925,  the 
astronomical  day  was  considered  to  start  at  noon,  and  the  principal  ephemerides 
had  been  given  for  0h  (i.e.  noon)  on  each  day.  As  of  1925  January  1  the  tabular 
day  was  brought  into  coincidence  with  the  civil  day  and  was  considered  to  start  at 
midnight;  the  ephemerides  were  still  given  for  0h,  now  indicating  midnight. 

The  revision  of  1931  was  much  more  than  a  rearrangement  of  the  same  data 
into  a  different  form.  The  changes  of  page  size,  of  presentation,  of  provision  for 
interpolation,  and  of  content  were  less  important  than  the  complete  break  with  the 
century  old  layout  designed  primarily  for  navigation.  The  new  form  was  designed  for 
the  astronomer  without  considering  the  requirements  of  navigation.  Its  arrangement 
remained  basically  unchanged,  though  there  were  frequent  changes  in  content  of  the 
less  fundamental  matter. 

Major  changes  were  introduced  in  the  1960  edition  when  the  almanac  was 
unified  with  The  American  Ephemeris,  including  the  use  of  ephemeris  time,  in- 
stead of  Universal  Time  (mean  solar  time  on  the  meridian  of  Greenwich),  as  the 
argument  for  the  fundamental  ephemerides.  This  change  further  emphasized  the 
unsuitability  of  the  volume  for  navigation,  and  led  to  the  adoption  of  its  new  title: 


13  /  HISTORICAL  INFORMATION  _„  „ 

Dl  3 

The  Astronomical  Ephemeris.  The  changes  are  fully  described  in  the  preface  to 
the  edition  for  1960.  (Some  additional  notes  on  the  history  of  The  Astronomical 
Ephemeris  are  given  on  pages  ix-xviii  of  the  volume  for  1967,  the  two-hundredth 
anniversary  edition.) 


13.12   The  American  Ephemeris  and  Nautical  Almanac 

During  the  first  half  of  the  nineteenth  century,  The  Nautical  Almanac  remained  in 
general  use  on  American  ships  and  among  astronomers  and  surveyors  in  the  United 
States.  However,  with  the  continued  development  of  the  country,  and  its  growth 
as  a  maritime  nation,  an  increasing  need  for  a  national  almanac  was  felt.  This 
need  eventually  led  to  a  bill  in  Congress,  approved  in  1849,  to  establish  a  Nautical 
Almanac  Office  in  the  Navy  Department.  The  Office  was  set  up,  during  the  latter 
part  of  1849  in  Cambridge,  Massachusetts,  where  library  and  printing  facilities  were 
available.  The  first  volume  of  The  American  Ephemeris  and  Nautical  Almanac  was 
for  the  year  1855,  and  was  published  in  1852.  The  office  was  moved  to  Washington 
in  1866,  and  then  was  moved  again  to  the  Naval  Observatory  in  1893. 

For  the  years  1855-1915  the  volume  was  divided  into  two  parts.  Then,  begin- 
ning with  1882,  it  was  divided  into  three  parts.  The  first  part  during  this  entire 
period  was  an  ephemeris  for  the  use  of  navigators  that  was  also  reprinted  sepa- 
rately, with  the  inclusion  of  a  few  pages  from  the  remainder  of  the  volume,  as  The 
American  Nautical  Almanac.  It  comprised  twelve  monthly  sections,  for  the  meridian 
of  Greenwich,  each  containing  ephemerides  of  the  Sun,  Moon,  and  lunar  distances 
for  the  month.  Following  the  monthly  sections  were  ephemerides  of  Venus,  Mars, 
Jupiter,  and  Saturn  for  the  year,  and,  beginning  with  1882,  of  Mercury,  Uranus, 
and  Neptune. 

The  second  part  of  the  volume  contained  ephemerides  of  the  Sun,  Moon,  plan- 
ets, and  principal  stars,  for  meridian  transit  at  Washington;  and  data  on  eclipses, 
occultations,  and  a  few  other  phenomena.  In  1882,  the  sections  on  phenomena  were 
formally  grouped  as  a  third  part  with  the  title  "Phenomena."  The  explanatory 
sections  and  a  few  miscellaneous  tables  completed  the  volume. 

During  the  period  1855  1915,  few  changes  were  made  in  the  form  or  content. 
The  nautical  part  remained  virtually  unaltered;  lunar  distances  were  omitted,  be- 
ginning with  1912,  but  a  page  explaining  how  to  calculate  them  was  included.  The 
principal  revisions  in  the  other  parts  of  the  volume  were  in  1882  and  1912  1913. 
The  rearrangement  of  the  1882  volume  was  accompanied  by  some  additions  and 
omissions.  The  principal  omission  was  the  ephemeris  of  Moon-culminating  stars  for 
determining  longitude.  The  principal  additions  were:  the  physical  ephemerides  of 
Mercury  and  Venus  for  the  reduction  of  meridian  and  photometric  observations; 
daily  diagrams  of  the  configurations  of  the  four  great  satellites  of  Jupiter;  and 
ephemerides  for  the  identification  of  the  satellites  of  Mars,  Saturn,  Uranus,  and 
Neptune.  In  the  volume  for  1912,  the  ephemerides  of  the  satellites  were  extended 


g1  4  EXPLANATORY  SUPPLEMENT 

to  include  tables  for  determining  the  approximate  position  angle  and  apparent  dis- 
tance; in  1913,  physical  ephemerides  were  added  for  the  Sun,  Moon,  Mars,  and 
Jupiter. 

Although  the  volume  for  1916  (the  first  to  be  issued  under  the  international 
agreements  resulting  from  the  Paris  Conference  of  1911)  contained  few  content 
changes,  extensive  revisions  were  made  in  the  form  and  arrangement  that  had 
been  retained  essentially  unchanged  since  1882.  The  arrangement  of  the  Green- 
wich ephemerides  of  the  Sun  and  Moon  by  monthly  sections  was  discontinued,  and 
replaced  by  annual  ephemerides.  At  the  same  time,  The  American  Nautical  Alma- 
nac ceased  to  be  a  reprint  of  part  of  The  American  Ephemeris,  but  instead  was  a 
separately  prepared  volume  especially  designed  for  the  navigator. 

In  1925,  the  astronomical  reckoning  of  time  from  0h  at  noon  was  replaced  by 
the  civil  reckoning  from  midnight. 

During  the  interval  from  1916  until  the  fundamental  revisions  in  1960  when  The 
American  Epkemeris  was  unified  with  The  Astronomical  Epkemeris,  the  revisions 
of  form  and  content  were  mostly  only  in  details,  although  a  few  major  changes 
were  incorporated.  In  the  volumes  for  1934-1937  a  number  of  further  subdivisions 
and  rearrangements  of  the  contents  were  made.  In  1937,  the  volume  was  formally 
divided  into  seven  parts;  the  part  constituting  the  ephemeris  for  Washington  was 
reduced  to  only  ephemerides  of  the  Sun,  Moon,  and  planets  for  meridian  transit  at 
Washington— all  the  other  material  was  transferred  to  other  parts  and  referred  to 
the  Greenwich  meridian. 

The  usefulness  of  the  Washington-transit  ephemerides  was  limited  to  observers 
on  the  Washington  meridian,  therefore  the  publication  of  this  part  was  discontinued 
beginning  with  the  1951  volume.  The  other  principal  changes  in  content  during 
1916-1959  were  the  following:  in  1919,  tables  of  the  rising  and  setting  of  the  Sun 
and  the  Moon  were  added;  in  1941,  the  number  of  stars  for  which  apparent  places 
were  given  was  decreased  to  212  (after  reaching  a  high  of  887)  when  Apparent  Places 
of  Fundamental  Stars  was  first  published;  in  1957,  apparent  places  were  omitted 
entirely,  but  precise  mean  places  of  1551  stars,  which  had  been  given  beginning  in 
1951,  were  continued.  The  departure  of  the  Moon  from  gravitational  theory  due 
to  the  variations  in  the  rotation  of  the  Earth  made  it  necessary  to  successively 
extend  the  elements  and  predictions  of  occultations  to  more  and  fainter  stars,  and 
additional  standard  stations.  An  ephemeris  of  Pluto  was  added  to  the  planetary 
ephemerides  in  1950;  and  ephemerides  of  Ceres,  Pallas,  Juno,  and  Vesta  in  1952. 

1 3.13  The  Cooperative  British  and  American  Almanacs  (1960  to  Present) 

Beginning  with  the  editions  of  1960,  The  Astronomical  Ephemeris  and  The  Amer- 
ican Ephemeris  and  Nautical  Almanac  were  joint  publications.  The  contents  were 


13  /  HISTORICAL  INFORMATION  g15 

prepared  cooperatively  and  with  the  exception  of  a  few  pages  prior  to  the  tabular 
data,  the  volumes  were  identical.  The  title  The  Astronomical  Ephemeris  replaced 
the  title  of  The  Nautical  Almanac  and  the  Astronomical  Ephemeris.  The  title  The 
Nautical  Almanac  was  used  both  in  the  United  Kingdom  and  the  United  States 
for  the  unified  edition  of  the  almanac  for  surface  navigation,  which  had  previously 
been  titled  The  Abridged  Nautical  Almanac,  and  The  American  Nautical  Almanac, 
respectively.  In  accordance  with  the  resolution  of  the  IAU,  the  designation  ephem- 
eris time  was  adopted  for  the  argument  of  the  fundamental  ephemeris  of  the  Sun, 
Moon,  and  planets. 

From  1960  onward,  The  Apparent  Places  of  Fundamental  Stars  was  published 
by  the  Astronomisches  Rechen  Institute  in  Heidelberg,  Germany,  under  the  auspices 
of  the  International  Astronomical  Union. 

The  IAU  System  of  Constants  adopted  by  the  IAU  at  its  Twelfth  General 
Assembly  in  Hamburg,  Germany  in  1964,  were  introduced  with  the  edition  for 
1968.  The  supplement  to  the  1968  edition  was  bound  in  the  back  of  the  volume 
and  provided  the  details  concerning  the  changes  in  the  constants.  An  appendix 
was  bound  in  the  front  for  the  years  1968  through  1971  and  gave  formulas  and 
corrections  for  conversion  to  the  IAU  System  of  Astronomical  Constants.  From 
1972  through  1980,  the  editions  were  published  with  only  minor  physical  changes 
in  the  arrangements  of  the  publication. 

Beginning  with  the  edition  for  1981,  the  title  The  Astronomical  Almanac  re- 
placed the  title  The  American  Ephemeris  and  Nautical  Almanac  and  the  title  The 
Astronomical  Ephemeris.  This  edition  of  The  Astronomical  Almanac  was  published 
jointly  by  the  U.S.  Government  Printing  Office  and  Her  Majesty's  Stationery  Of- 
fice. The  physical  content  of  The  Astronomical  Almanac  changed  in  many  respects. 
However,  the  bases  for  the  ephemerides  were  unchanged,  except  that  the  funda- 
mental heliocentric  ephemerides  of  the  Earth,  Mercury,  and  Mars  were  computed 
directly  from  Newcomb's  theories  instead  of  from  Newcomb's  Tables,  and  for  the 
Earth,  the  IAU  1964  System  of  Astronomical  Constants  was  used. 

In  1984,  the  bases  for  the  ephemerides  were  changed.  New  fundamental  ephem- 
erides of  the  planets  and  the  Moon  were  prepared  at  the  Jet  Propulsion  Laboratory 
and  titled  DE200/LE200.  These  ephemerides  were  in  general  accord  with  the  recom- 
mendations of  the  IAU  1976  System  of  Astronomical  Constants,  except  for  minor 
modifications  necessary  to  better  fit  the  observations.  The  dynamical  timescales 
and  the  standard  of  reference  of  J2000.0  were  introduced.  The  day  numbers  and 
star  positions  were  referred  to  the  equinox  and  the  equator  of  the  middle  of  the 
year  instead  of  the  beginning  of  the  year.  A  supplement  to  The  Astronomical  Al- 
manac for  1984  was  bound  in  the  back  of  the  volume,  and  gave  the  details  of  the 
resolutions  adopted  by  the  International  Astronomical  Union  and  documentation 
concerning  the  ephemerides. 


g1  g  EXPLANATORY  SUPPLEMENT 

13.2   HISTORY  OF  INTERNATIONAL  COOPERATION 


13.21    Cooperation  Prior  to  the  lAU 

Formal  international  cooperation  began  in  October  1884  at  the  International  Merid- 
ian conference  held  in  Washington.  The  resolutions  of  that  conference  included: 

"the  adoption  of  the  meridian  passing  through  the  center  of  the  transit 
instrument  at  the  Observatory  of  Greenwich  as  the  initial  meridian  for 
longitude." 

"That  from  this  meridian  longitude  shall  be  counted  in  two  directions 
up  to  180  degrees,  east  longitude  being  plus  and  west  longitude  minus." 

"the  adoption  of  a  universal  day  for  all  purposes  for  which  it  may  be 
found  convenient" 

"That  this  universal  day  is  to  be  a  mean  solar  day;  is  to  begin  for  all  the 
world  at  the  moment  of  mean  midnight  of  the  initial  meridian,  coinciding 
with  the  beginning  of  the  civil  day  and  date  of  that  meridian;  and  is  to  be 
counted  from  zero  up  to  twenty-four  hours." 

"That  the  Conference  expresses  the  hope  that  as  soon  as  may  be  prac- 
ticable the  astronomical  and  nautical  days  will  be  arranged  everywhere  to 
begin  at  mean  midnight." 

Although  the  other  resolutions  were  adopted,  the  convention  of  west  longitude 
as  positive  was  used  in  astronomy  until  1984  when  the  general  use  of  East  posi- 
tive was  introduced.  The  Astronomical  Almanac  switched  convention  at  that  time, 
exactly  one  hundred  years  after  the  International  Meridian  conference. 

At  the  invitation  of  the  Bureau  des  Longitudes,  the  directors  of  the  national 
ephemerides  and  other  astronomers,  met  in  Paris  in  May  1896  for  the  Conference 
Internationale  des  Etoiles  Fondamentales.  In  addition  to  adopting  resolutions  con- 
cerning the  fundamental  catalog,  and  the  calculation  and  publication  of  apparent 
places  of  stars,  the  Conference  adopted  the  following  fundamental  constants: 

Nutation  9'.'21 
Aberration  20'.'47 
Solar  parallax  8'.'80 

It  also  agreed  to  adopt  Newcomb's  definitive  values  (which  were  not  then  in 
final  form)  of  lunisolar  and  planetary  precession. 

Active  cooperation  between  the  offices  of  the  national  ephemerides  dates  from 
the  Congress  International  des  Ephemerides  Astronomiques  held  at  the  Paris  Ob- 
servatory in  October  1911.  This  conference  was  called  by  B.  Bailaud,  Director  of 
the  Observatory  and  President  of  the  Comite  International  Permanent  de  la  Carte 


13  /  HISTORICAL  INFORMATION  g-jy 

Photographique  du  Ciel  on  the  initiative  of  the  Bureau  des  Longitudes.  Its  pur- 
pose was  "d'etablir  une  entente  permettant  d'augmenter,  sans  nouveaux  frais  la 
masse  de  donnees  numeriques  fournies  annuellement  aux  observateurs  et  aux  calcu- 
lateurs."  Although  the  Conference  was  primarily  concerned  with  obtaining  a  greatly 
increased  list  of  apparent  places  of  stars,  it  extended  its  attention  to  all  the  ephem- 
erides of  bodies  in  the  solar  system.  Its  comprehensive  recommendations  covered 
the  distribution  of  calculations  between  the  five  principal  ephemeris  offices  (France 
Germany,  Great  Britain,  Spain,  and  the  United  States),  specified  standards  of  cal- 
culation and  presentation,  arranged  for  publication  of  additional  data,  and  fixed 
the  values  of  two  further  constants  to  be  used  in  the  ephemerides:  the  flattening 
of  the  Earth  (1/297)  and  the  semidiameter  of  the  Sun  at  unit  distance  for  eclipse 
calculations  (15'59''63).  Most  of  these  recommendations  are  still  in  force. 

Official  approval  was  in  some  cases  necessary  for  the  adoption  of  these  rec- 
ommendations, as  illustrated  by  the  following  extract  from  the  Act  of  Congress  of 
August  22,  1912  (37  Stat.  L.,  328,  342): 

"The  Secretary  of  the  Navy  is  hereby  authorized  to  arrange  for  the  exchange 
of  data  with  such  foreign  almanac  offices  as  he  may  from  time  to  time 
deem  desirable,  with  a  view  to  reducing  the  amount  of  duplication  of  work 
in  preparing  the  different  national  nautical  and  astronomical  almanacs  and 
increasing  the  total  data  which  may  be  of  use  to  navigators  and  astronomers 
available  for  publication  in  the  American  Ephemeris  and  Nautical  Almanac: 
Provided..." 

Here  follows  a  number  of  provisions.  The  most  important  provision  astronomi- 
cally was  the  repeal  of  the  proviso  in  the  appropriation  Act  of  September  28,  1850 
(9  Stat.  L.,  513,  515)  that  "hereafter  the  meridian  of  the  observatory  at  Washington 
shall  be  adopted  and  used  as  the  American  meridian  for  all  astronomical  purposes, 
and  that  the  meridian  of  Greenwich  shall  be  adopted  for  all  nautical  purposes." 

Such  exchange  agreements  have  been  carried  out  in  spite  of  international  diffi- 
culties. 


13.22   International  Astronomical  Union 

In  1911,  agreements  had  been  directed  almost  entirely  to  the  reduction  of  the  total 
amount  of  work  by  the  avoidance  of  duplicate  calculation.  In  1938,  Commission 
4  recommended  that  this  principle  should  be  extended  to  the  avoidance  of  dupli- 
cate publication  by  the  collection  in  a  single  volume  of  the  apparent  places  of  stars 
then  printed  in  each  of  the  principal  ephemerides.  This  recommendation,  coupled 
with  the  adoption  of  the  Dritler  Fundamentalkatalog  des  Berliner  Astronomischen 
Jahrbuchs  (FK3),  was  implemented  for  1941  by  the  publication  of  the  international 


EXPLANATORY  SUPPLEMENT 

volume  Apparent  Places  of  Fundamental  Stars  (under  the  auspices  of  the  Interna- 
tional Astronomical  Union).  This  work  gave  astronomers  access  to  the  apparent 
places  of  stars  in  one  volume,  and  the  individual  ephemeris  offices  were  saved  the 
work  of  the  compilation  and  proofreading,  as  well  as  the  cost  of  typesetting. 

Continuing  the  precedents  of  the  1896  and  1911  conferences,  the  Director  of 
the  Paris  Observatory  (Professor  A.  Danjon)  convened  a  further  conference  that 
was  held  in  Paris  in  March  1950  to  discuss  the  fundamental  constants  of  astron- 
omy. The  leading  recommendation  was  "that  no  change  be  made  in  the  conven- 
tionally adopted  value  of  any  constant."  But  the  recommendations  with  the  most 
far-reaching  consequences  were  those  which  defined  ephemeris  time  and  brought 
the  lunar  ephemeris  into  accordance  with  the  solar  ephemeris  in  terms  of  ephemeris 
time.  These  recommendations  were  addressed  to  the  International  Astronomical 
Union  and  formally  adopted  by  Commission  4  and  the  General  Assembly  of  the 
Union  in  Rome  in  September  1952. 

Commission  4  had,  at  various  times,  made  arrangements  for  the  redistribu- 
tion of  calculations  between  the  ephemeris  offices.  For  example,  the  Institute  for 
Theoretical  Astronomy  in  Leningrad  contributed  apparent  places  of  stars  to  the 
international  volume  for  the  years  1951-1959.  With  the  availability  of  fast,  au- 
tomatic calculating  machines,  it  was  now  both  practicable  and  efficient  for  large 
blocks  of  work,  such  as  the  calculation  of  apparent  places  of  stars,  to  be  done  in 
one  office.  At  the  1955  General  Assembly  of  the  Union  in  Dublin,  a  general  redis- 
tribution of  calculations  along  these  lines  was  agreed  upon  by  the  directors  of  the 
national  ephemerides  and  confirmed  by  Commission  4.  The  reports  of  Commission 
4  in  Transactions  of  the  International  Astronomical  Union  documented  the  full 
details  of  these  agreements,  the  changes  in  the  bases  of  the  ephemerides,  and  the 
discussions  leading  to  the  introduction  of  Apparent  Places  of  Fundamental  Stars. 

In  the  Draft  Report  for  the  Twelfth  General  Assembly,  held  in  Hamburg  in 
1964,  D.  H,  Sadler  indicated  that  the  functions  of  Commission  4  on  Ephemerides 
were  twofold:  "firstly,  to  ensure  that  the  published  ephemerides  fully  meet  the  re- 
quirements of  astronomers  and  other  users;  and  secondly,  to  coordinate  the  work  of 
the  offices  of  the  national  ephemerides  to  ensure  consistency,  economy  of  effort,  and 
efficiency."  Cooperation  within  the  IAU  on  ephemerides  has  been  directed  toward 
these  functions.  The  primary  emphasis  of  the  first  function  has  been  the  establish- 
ment of  a  consistent  and  universal  set  of  constants  and  bases  for  the  ephemerides. 
A  brief  review  of  the  efforts  in  these  two  areas  may  be  helpful. 

At  a  meeting  on  fundamental  constants  for  astronomy  held  in  Paris  during 
March  1950,  the  definition  of  ephemeris  time  was  recommended,  and  the  lunar 
ephemeris  was  brought  into  accordance  with  the  solar  ephemeris  with  respect  to 
ephemeris  time.  These  recommendations  were  adopted  in  1952  by  Commission  4  of 
the  IAU  at  the  Eighth  General  Assembly  in  Rome. 


13  /  HISTORICAL  INFORMATION  g 

The  IAU  Symposium  No.  21  (Paris,  May  1963)  concluded  that  a  change  in 
the  conventional  IAU  system  of  constants  could  no  longer  be  avoided.  The  incon- 
sistencies and  inadequacies  of  the  system  of  that  time,  the  better  values  of  some 
constants  from  recent  determinations,  and  deficiencies  revealed  by  discussions  of 
high  accuracy  observations  indicated  the  need  for  new  constants. 

At  the  Twelfth  General  Assembly  (Hamburg,  1964)  a  working  group  reviewed 
the  report  of  the  IAU  Symposium.  A  list  of  constants  proposed  by  the  Working 
Group  on  the  System  of  Astronomical  Constants  was  adopted  and  recommended 
for  use  at  the  earliest  practicable  date  in  the  national  and  international  astronomical 
ephemerides.  These  constants  were  introduced  in  the  ephemerides  for  1968.  It  was 
also  noted  that  the  constants  of  precession  and  planetary  masses  had  not  been 
changed  and  that  consideration  should  be  given  to  their  future  improvement. 

In  August  1970,  IAU  Colloquium  No.  9  on  the  IAU  System  of  Astronom- 
ical Constants  was  held  in  Heidelberg,  and  recommended  the  establishment  of 
three  working  groups — on  planetary  ephemerides,  on  precession,  and  on  units  and 
timescales.  The  recommendations  were  adopted  and  the  working  groups  were  es- 
tablished at  the  1970  IAU  General  Assembly  in  Brighton,  England.  A  working 
meeting  on  constants  and  ephemerides  was  held  in  October  1974,  in  Washington, 
DC  to  draft  a  proposed  report  of  the  working  groups.  The  chairmen  of  the  working 
groups  met  in  September  1975,  and  June  1976,  in  Herstmonceaux  and  Washing- 
ton, respectively.  The  Report  and  Recommendations,  known  as  the  Joint  Report  of 
the  Working  Groups  of  I  A  U  Commission  4  on  Precession,  Planetary  Ephemerides, 
Units  and  Time  Scales  were  adopted  by  the  IAU  in  August  1976  in  Grenoble. 

In  1976,  a  working  group  on  cartographic  coordinates  and  rotational  elements 
of  planets  and  satellites  was  established  by  IAU  Commissions  4  and  16.  In  1977,  a 
working  group  on  nutation  was  established  by  Commission  4.  These  groups  were  ex- 
pected to  provide  recommendations  for  consideration  at  the  1979  General  Assembly 
in  Montreal. 

The  second  primary  function  of  Commission  4  on  ephemerides — the  coordina- 
tion of  the  efforts  of  the  various  offices — was  being  fulfilled  with  the  move  from  the 
distribution  of  calculations  among  the  separate  offices,  the  unification  of  printing, 
and  the  exchange  of  reproduction  proofs  for  printing  by  the  various  countries.  This 
change  was  made  possible  by  the  advent  of  high-speed  computers. 

At  the  Fourth  General  Assembly  of  the  IAU  held  in  Cambridge,  MA  in  1932, 
Dr.  L.  J.  Comrie,  Director  of  the  British  Nautical  Almanac  Office,  suggested  that 
duplicate  printing  in  the  national  volumes  of  ephemerides  be  discussed,  particu- 
larly with  respect  to  the  apparent  places  of  stars.  At  that  time,  Professor  Herrero 
suggested  that  the  ideal  would  be  an  international  almanac.  At  the  Fifth  General 
Assembly  (Paris,  1935)  an  agreement  was  reached  for  a  single  publication  of  the 


Q2Q  EXPLANATORY  SUPPLEMENT 

Apparent  Places  of  Stars,  initially  to  be  printed  in  Great  Britain  and  now  printed 
in  Germany. 

At  the  Ninth  General  Assembly  (Dublin,  1955),  an  international  fundamental 
astronomical  ephemeris  (IFAE)  was  discussed.  The  IFAE  was  to  be  a  single  pub- 
lication, under  the  auspices  of  the  IAU,  containing  the  fundamental  astronomical 
ephemerides  to  the  fullest  accuracy.  The  national  ephemerides  could  then  be  much 
smaller  and  cater  more  directly  to  the  practical  astronomer.  Although  many  were  in 
favor  of  this  proposal,  several  factors  prevented  its  adoption:  the  practical  difficulty 
that  the  sales  were  not  likely  to  cover  the  cost  of  printing,  because  of  the  antic- 
ipation of  required,  free  distribution;  the  difficulty  for  astronomers  of  purchasing 
books  published  in  other  countries;  the  required  cooperation  of  almost  all  national 
ephemerides;  and  the  loss  of  flexibility.  However,  various  countries  using  reproduc- 
tion proofs  of  material  prepared  by  a  single  source  was  an  attractive  alternative. 
At  the  same  time,  it  was  announced  that  an  agreement  had  been  reached  for  the 
unification  of  The  American  Ephemeris  and  Nautical  Almanac  and  The  Nautical 
Almanac  and  Astronomical  Ephemeris  beginning  with  the  year  1960.  It  was  hoped 
that  other  ephemeris  offices  would  save  considerable  composition  and  proofreading 
costs  by  using  photolithography  for  reproduction. 

At  the  Tenth  General  Assembly  (Moscow,  1958)  it  was  reported  that  the 
Astronomisch-Geodatisches  Jahrbuch,  introduced  for  the  year  1949,  would  cease 
publication  after  the  1959  edition  and  that  the  Berliner  Astronomisches  Jahrbuch, 
introduced  for  the  year  1776,  would  cease  publication  after  the  edition  for  1959. 
As  a  result  of  these  savings  of  composition  and  printing  costs,  the  Astronomisches 
Rechen-Institute  was  able  to  take  over  composition  and  publication  of  the  Appar- 
ent Places  of  Fundamental  Stars.  Although  it  was  sad  to  see  a  publication  of  long 
standing  cease,  the  change  indicated  an  increased  international  cooperation  and 
permitted  a  beneficial  transfer  of  functions. 

G.  M.  Clemence  and  D.  H.  Sadler  reported  at  the  Eleventh  General  Assembly 
(Berkeley,  1961)  that  an  important  step  towards  unification  of  the  national  ephem- 
erides had  taken  place  in  the  unification  of  the  American  and  British  volumes.  They 
stated  further  that: 

"Many  dearly-held,  but  essentially  unimportant,  standards  and  prejudices 
have  had  to  be  sacrifices  on  both  sides;  it  is  surprising  how  quickly  these  lose 
their  former  importance  in  the  satisfaction  of  a  comprehensive  agreement. 
That  same  cooperation,  good  will  and  confidence  exists  between  all  the 
national  ephemeris  offices,  and,  although  differences  of  language  will  intro- 
duce some  further  difficulties,  there  is  no  obstacle  to  complete  unification 
that  will  not  be  overcome  in  course  of  time." 


Between  1962  and  1964  the  Japanese  and  Soviet  ephemerides  began  using  the 
advanced  proofs  from  The  Astronomical  Ephemeris. 


13  /  HISTORICAL  INFORMATION  ggi 

In  October  1974,  plans  were  begun  to  revise  the  organization,  content,  and  basis 
for  The  American  Ephemeris  and  Nautical  Almanac/Astronomical  Ephemeris.  It 
was  decided  that  a  single  unified  printing  in  English  would  be  made  in  the  United 
States,  and  that  it  would  be  available  from  both  Her  Majesty's  Stationery  Office 
in  England  and  the  Superintendent  of  Documents  in  the  United  States.  Since  the 
United  States  legal  code  required  the  title  The  American  Ephemeris  and  Nautical 
Almanac,  a  bill  was  introduced  into  Congress  to  modify  the  legal  code  to  permit  a 
change  in  the  name  of  the  publication.  Also,  it  was  decided  that  the  organization 
and  content  would  be  changed  for  the  1981  edition. 


1 3.23  Other  International  Organizations 

Improvements  in  accuracies  and  in  knowledge  concerning  the  motions  and  rotations 
of  the  bodies  in  the  solar  system,  particularly  the  rotation  of  the  Earth  and  our 
use  of  accurate  time,  has  created  a  growing  need  for  closer  cooperation  between 
the  different  international  organizations.  Thus,  many  international  organizations 
become  involved  in  various  aspects  of  international  standardization.  Some  of  these 
different  organizations  and  their  functions  are  described  in  the  following  paragraph. 

The  International  Association  of  Geodesy  (IAG)  is  interested  in  the  rotational 
elements  and  physical  characteristics  of  the  planets.  The  Committee  on  Space  Re- 
search (COSPAR)  is  interested  in  the  cartographic  coordinate  systems  and  the 
gravity  fields  of  the  planets  and  satellites.  The  Consultative  Committee  on  Inter- 
national Radio  (CCIR)  is  responsible  for  standardization  of  time  and  frequency 
as  used  in  radio  transmissions;  its  Study  Group  Seven  reaches  agreements  in  this 
area.  The  Committee  Internationale  des  Poides  et  Mesures  (CIPM)  coordinates 
the  standards  of  the  units  of  measure.  The  Consultative  Committee  on  the  Def- 
inition of  the  Second  (CCDS)  is  responsible  for  the  definition  of  the  second  and 
the  principles  for  measuring  the  second.  The  Committee  on  Data  for  Science  and 
Technology  (CODATA)  works  on  an  interdisciplinary  basis  to  improve  the  quality, 
reliability,  processing,  management,  and  accessibility  of  data  of  importance  to  sci- 
ence and  technology.  The  Bureau  Internationale  des  Poides  et  Measures  (BIPM)  in 
Paris,  France,  is  responsible  for  maintaining  International  Atomic  Time  (TAI)  and 
providing  a  single  atomic  timescale,  worldwide.  The  International  Earth  Rotation 
Service  (IERS)  determines  the  rotation  of  the  Earth,  and  thus  the  UTC  timescale. 
It  also  determines  when  leap  seconds  should  be  inserted  into  the  UTC  timescale. 


13.3    HISTORICAL  LIST  OF  AUTHORITIES 


13.31  Introduction 


It  is  important  to  know  the  basis  of  the  ephemerides  to  properly  interpret  the  results 
of  past  discussions  of  observations.  For  this  reason,  and  for  purposes  of  historical 


§22  EXPLANATORY  SUPPLEMENT 

interest  and  record,  the  following  list  of  authorities  is  given  in  the  original  form.  In 
addition,  a  few  uncertainties  and  ambiguities,  which  could  only  have  been  resolved 
by  excessive  research  or  recalculation,  have  been  allowed  to  remain. 

The  material  is  arranged  in  the  following  subgroups:  up  to  1900  The  Nautical 
Almanac  and  The  American  Ephemeris  are  treated  separately,  and  after  1900  they 
are  combined.  Each  subsection  is  divided  according  to  body  or  subject  (e.g.,  Sun, 
Moon,  precession,  nutation,  satellite  constants).  Within  each  division  the  author- 
ities, arranged  chronologically,  are  preceded  by  a  short  narrative  of  the  quantities 
tabulated.  In  these  discussions  "and"  is  used  to  indicate  that  the  quantity  is  tabu- 
lated to  n  decimal  places,  and  the  term  "precision"  is  used  to  indicate  merely  the 
unit  of  the  end  figure.  Usually,  only  names  and  dates  are  given  for  the  unit  of  the 
end  figure.  Also,  only  names  and  dates  are  given  for  the  authorities;  full  references 
are  given  in  Section  13.4.  In  some  cases,  for  example  for  the  adopted  semidiameters 
of  the  planets,  detailed  references  to  the  original  publications  have  been  omitted. 

Some  of  the  tabulated  ephemerides  are  based  on  theories,  derivations,  and 
constants  given  in  appendices  and  supplements  to  The  Nautical  Almanac  and  to 
The  American  Ephemeris.  Lists  of  these  appendices  and  supplements  are  given  in 
Section  14.6. 


1 3.32   The  Nautical  Almanac  (1 767-1 900) 

13.321  Sun  All  ephemerides  from  1767  to  1833  were  given  with  the  argument  ap- 
parent time.  Quantities  tabulated  for  the  Sun  at  intervals  of  one  day  were  longitude 
and  declination  (each  to  1"),  and  right  ascension  and  equation  of  time  (each  to  l5). 
Semidiameters  in  arc  (to  0"1),  in  time  (to  0!1),  and  log  distance  (to  6D)  were  given 
at  intervals  of  6  days.  From  1768,  the  equation  of  time  (to  0?1)  was  given,  and  from 
1772,  the  right  ascension  (to  0!1)  was  also  given.  For  the  years  1815-1822,  the  log 
distance  (to  5D)  was  given.  In  1833,  the  semidiameters  (to  0"01,  to  0!01)  and  log 
distance  (to  7D)  were  given  at  intervals  of  one  day. 

The  1834  almanac  was  largely  remodeled  in  accordance  with  the  Royal  Astro- 
nomical Society's  report  printed  in  that  almanac,  and  thereafter  the  argument  of 
most  ephemerides  was  mean  time.  Most  quantities  tabulated  in  time  were  given 
to  0?01,  those  in  arc  to  0"1  (except  the  Sun's  latitude,  given  to  Ol'Ol),  and  the  log 
radius  vector  to  7D.  In  many  cases,  differences  or  variations  were  given.  From  1848, 
equational  rectangular  coordinates  (to  7D)  were  included  at  intervals  of  one  day, 
latitude  terms  being  included  for  the  first  time  in  1866;  the  values  for  1845-1847 
were  given  in  the  1848  volume.  No  other  substantial  changes  were  made  before 
1900. 

1767-1796:     Mayer's  "last  manuscript  tables"  assumed  an  annual  precession  of 
50"3. 


13  /  HISTORICAL  INFORMATION 

1797-1804:    Mayer's  tables  with  the  mean  motion  corrected  to  the  revised  preces- 
sion of  50"2. 

1805-1812:     Delambre's  tables  as  given  in  Lalande  (1792),  but  with  certain  (un- 
specified) coefficients  determined  by  Maskelyne. 
1813-1821:     Improved  tables  by  Delambre  (1806). 

1822-1832:  The  tables  in  Vince  (1808,  Volume  III),  "with  the  omission  only  of 
some  equations  which  do  not  materially  effect  the  results."  The  tables 
are  stated  by  Vince  (Volume  III,  page  2)  to  have  been  "constructed 
by  M.  de  Lambre,  from  observations  of  Dr.  Maskelyne,  and  the  theory 
of  M.  Laplace.  See  Les  Memories  de  Berlin,  for  1784,  1785."  (In  1832 
the  position  of  the  Sun  for  the  calculation  of  the  transit  of  Mercury 
was  taken  from  Carlini's  tables.) 

1833:  The  longitude  was  taken  from  Delambre's  tables,  improved  by  Airy's 

corrections  based  on  Greenwich  observations. 

1834-1835:  Carlini's  tables  (1810)  with  Bessel's  corrections  (1828)  and  nutation 
as  in  the  Astronomical  Society's  tables  (Baily,  1825).  The  elements 
used  by  Carlini  are  the  same  as  those  of  Delambre  (1806),  but  the 
arrangement  is  better  for  the  construction  of  an  ephemeris. 

1836-1863:     Carlini  (1832). 

1864-1900:     Leverrier  (1858). 

13.322  Moon  The  Moon's  longitude,  latitude,  semidiameter,  and  horizontal  par- 
allax (each  to  1")  and  its  right  ascension  and  declination  (each  to  1')  were  tabulated 
at  intervals  of  12h  (apparent  time)  for  the  years  1767-1833.  Lunar  distances  (from 
at  least  one  star,  and  after  1770  from  one  or  two  stars  as  well  as  the  Sun  when  the 
Sun  was  conveniently  placed)  were  given  to  a  precision  of  1"  for  every  3".  From  1823, 
the  right  ascension  and  declination  were  given  to  1".  In  1834,  the  argument  became 
mean  time  and,  with  occasional  minor  alterations,  the  tabulations  were  given  to  an 
extra  figure  until  the  year  1900.  The  right  ascension  (to  0!01)  and  the  declination 
(to  0'.'1)  were  given  at  intervals  of  one  hour. 


1767  1776:     Mayer  last  manuscript  tables. 

1777-1 788:  Mayer's  tables,  improved  by  Mason  under  Maskelyne's  direction,  based 
on  Bradley's  observations  (the  latter  are  printed  in  The  Nautical  Al- 
manac for  1774). 

1789  1796:  Mayer's  tables  were  further  improved  by  Mason  (1780).  Eight  new 
equations  were  taken  from  Mayer's  tables,  the  coefficients  being  de- 
termined from  Bradley's  observations.  The  eighteenth  equation  in  lon- 
gitude was  omitted. 

1797-1804:  The  same  set  of  tables,  but  adjusted  (as  for  the  Sun)  for  the  corrected 
value  of  precession. 


524  EXPLANATORY  SUPPLEMENT 

1805-1807:  Lalande  (1792);  the  tables  are  the  same  as  Mason  (1780)  except  for 
the  substitution  of  Laplace's  acceleration  and  secular  motion. 

1808:  Lalande's  tables,  with  the  addition  of  two  further  inequalities  found 

by  Laplace. 

i809  1812:  The  epochs,  Laplace's  accelerations,  and  "a  particular  equation  of  his" 
were  taken  by  Maskelyne  from  Burg's  tables,  and  the  mean  longitudes 
were  computed.  The  parallax  was  taken  from  Mayer. 

1813-1817:  Burg  (1806)  on  Laplace's  theory,  the  coefficients  being  determined 
from  Maskelyne's  observations,  and  the  epochs  from  those  of  Maske- 
lyne and  Bradley. 

1818-1820:  According  to  Pond's  preface,  the  tables  of  Burckhardt  were  used.  [But 
a  note  (initialed  T.Y.)  at  the  end  of  the  1820  preface  states  that  those 
of  Burg  were  used.] 

1821-1833:     Burckhardt  (1812). 

1834-1855:     Burkhardt's  tables,  with  nutation  from  Baily  (1825). 

1856:  As  in  the  previous  years,  but  the  parallax  taken  from  Adams  (1853b) 

and  the  semidiameter  taken  as  0.2725  times  the  horizontal  parallax. 
1857-1861:     The  ratio  of  semidiameter  to  horizontal  parallax  was  changed  to 

0.273114. 
1862-1882:     Hansen  (1857). 

1883  1895:  Hansen,  but  with  Newcomb's  corrections  (1878b)  included  in  the  right 
ascension  and  declination. 

1896:  As  in  previous  years,  and  with  the  substitution  of  Newcomb's  Table 

XXXIV  for  Hansen's. 

1897-1900:  Newcomb's  corrections  included  in  horizontal  parallax  and  semidiam- 
eter. 


13.323  Major  Planets  Ephemerides  of  the  five  "classical"  planets  were  given  at 
intervals  of  6  days  until  1832,  except  for  Mercury,  which  were  given  at  intervals  of  3 
days  from  1778.  Those  of  Uranus  (at  intervals  of  10  days)  were  introduced  in  1789 
and  again  from  1791  onwards.  The  adopted  precision  was  1"  for  declination  and  both 
heliocentric  and  geocentric  longitudes  and  latitudes.  When  the  right  ascension  was 
added,  in  1819,  a  precision  of  lm  was  used. 

Heliocentric  coordinates  were  omitted  in  1833,  while  declination  (to  1"),  geo- 
centric longitude  and  latitude  (to  1"),  right  ascension  (to  0!1),  and  log  distance  (to 
5D),  were  all  given  at  intervals  of  one  day. 

The  intervals  were  changed  in  1834  to  one-day  intervals  for  all  planets.  In  1861, 
when  Neptune  was  introduced,  the  intervals  for  Uranus  and  Neptune  were  changed 
to  4  days.  Right  ascension  (to  0!01),  declination  (to  O'.'l),  heliocentric  longitude 
and  latitude  (to  Ol'l),  and  log  distance  and  log  radius  vector  (each  to  7D)  were 
included.  Geocentric  longitude  and  latitude  were  omitted  for  the  year  1834.  A  geo- 
centric (equatorial)  ephemeris  of  Neptune  was  published  between  1850  and  1860, 


13  /  HISTORICAL  INFORMATION  g2 

at  intervals  of  5  days,  usually  as  an  appendix  to  later  Almanacs. 

Transit  ephemerides  were  introduced  in  1839  for  Mercury  to  Uranus,  and  i 
1861  for  Neptune. 


Mercury,  Venus,  Mars,  Jupiter,  Saturn 
1767-1779:     Halley  (1749). 

1780-1804:     Wargentin's  tables,  "annexed  to  M.  De  Lalande's  Astronomy." 

1805-1833:  Lalande  (1792).  These  are  the  tables  calculated  by  Delambre  on  the 
theory  of  Laplace.  From  1822,  the  tables  of  Mars  were  taken  from 
"those  of  Lalande  in  the  Connaissance  des  Terns  [sic]  for  the  12th 
year  [1803-04]."  The  pi  aces  of  Mercury  for  the  transit  of  1832  were 
taken  from  Lindenau's  tables. 

Mercury 

1834-1863:     Lindenau  (1813). 

1864-  1900:     Leverrier  (1859). 

Venus 

1834-1864:     Lindenau  (1810).  For  the  years  1837-1848  a  correction  of  -2'  18"  was 
applied  to  the  tabular  longitude  of  the  node. 

1865-  1900:     Leverrier  (1861a). 

Mars 

1834-1865:     Lindenau  (1811). 

1866-  1900:     Leverrier  (1861b). 

Jupiter 

1834-1877:     Bouvard  (1821). 
1878  1900:     Leverrier  (1876a). 

Saturn 

1834-1879:  Bouvard  (1821).  [For  the  years  1852-1879,  Bouvard's  Table  42  was 
used  in  the  corrected  form  given  by  Adams  (1849)  and  in  The.  Nautical 
Almanac  1851,  xiv.] 

1880-1900:     Leverrier  (1876b). 


g26  EXPLANATORY  SUPPLEMENT 

Uranus  ("The  Georgian"  in  The  Nautical  Almanac  1789-1850) 

1789,  1791-1833:     Computed  from  the  same  tables  used  for  the  "classical"  planets. 


1834-1876 
1877-1881 
1882-1900 


Bouvard  (1821). 
Newcomb  (1873). 
Leverrier  (1877a). 


Neptune 

1850-1857:     Computed  from  elements  given  in  various  issues  of  the  Berliner  Jahrbuch 

and  The  Nautical  Almanac. 
1858-1870:     Kowalski  (1855).  (This  is  a  little  uncertain  for  the  years  1859-1860, 

as  the  supplements  to  the  almanacs  containing  these  ephemerides  do 

not  quote  the  authority.) 
1871-1881:     Newcomb  (1873). 
1882-1900:     Leverrier  (1877b). 


13.324  Minor  Planets  Ephemerides  of  minor  planets  were  given  for  the  first  time 
in  the  almanac  for  1834.  That  issue  contained  ephemerides  based  on  elements  by 
Encke,  at  intervals  of  4  days  throughout  the  year  for  Ceres,  Palles,  Juno,  and  Vesta. 
The  right  ascension  was  tabulated  to  0T1,  declination  and  heliocentric  longitude  and 
latitude  to  1',  and  log  distance  and  log  radius  vector  to  4D.  For  one  month  on  each 
side  of  opposition,  at  intervals  of  one  day,  the  right  ascension  was  given  to  0!01, 
declination  to  O'.'l,  and  log  distance  and  log  radius  vector  to  5D. 

Similar  ephemerides  for  the  years  to  1849  were  based  on  the  same  elements, 
with  variations  calculated  by  the  method  given  by  Airy  (1835). 

Between  1850  and  1866,  the  number  of  planets  for  which  ephemerides  at  wider 
intervals  were  published,  was  increased  to  as  many  as  36  in  some  years.  The  elements 
used  were  from  a  number  of  different  authors.  (The  almanac  for  1856  contains  a 
translation  (by  Airy)  of  papers  by  Encke  (1852a  and  1852b)  on  the  computation  of 
special  perturbations.) 

From  1867,  ephemerides  for  only  live  planets  were  published,  and  from  1876, 
only  the  first  four  planets  were  included,  on  the  grounds  that  more  accurate  ephem- 
erides were  to  be  published  in  the  Berliner  Jahrbuch. 


Ceres 

1867-1881:  Schubert  (1854). 
1882-1900:     Godward  (1878). 


Pallas 


1867-1900:     Farley  (1856a). 


13  /  HISTORICAL  INFORMATION 

Juno 


627 


1867-1893:     Hind  (1855). 

1894-1900:     Hind  (1855),  with  corrections  by  Downing  (1890). 
Vesta 

1867-1900:    Farley  (1856b). 
Astraea 

1867-1875:    Farley  (1856). 

13.325  Satellites  No  predictions  for  satellites,  except  for  the  Galilean  satellites  of 
Jupiter,  were  published  until  1899.  Diagrams  of  the  apparent  orbits  at  the  time  of 
opposition  and  elongations  (to  0?l)  for  a  limited  period  around  opposition,  were 
given  for  the  satellites  of  Mars,  Saturn,  Uranus,  and  Neptune.  The  authorities  for 
the  latter  are  the  same  as  that  for  1901,  and  are  listed  in  Section  13.345. 

Diagrams  of  the  configurations  and  predictions  of  eclipses  for  Jupiter's  satellites 
have  been  published  in  every  issue  of  The  Nautical  Almanac. 


1767-1804 
1805-1823 
1824-1833 
1834-1839 
1840-1900 


Eclipses  to  Is;  based  on  Wargentin  (1746). 
Based  on  Lalande  (1792)  (quoting  Delambre). 
Based  on  Delambre  (1817). 

Eclipses  to  0?1.  Other  phenomena  to  lm;  based  on  Delambre  (1817). 
As  in  1834  1839.  From  1877,  eclipses  to  Is.  From  1896,  times  of  con- 
junction to  OF  I,  based  on  Damoiseau  (1836),  and  extensions  by  Adams 
and  others. 


13.326    Auxiliary  Quantities     Auxiliary  quantities  include  sidereal  time,  mean  obliq- 
uity of  the  ecliptic,  apparent  obliquity  of  the  ecliptic,  precession,  nutation,  con- 
stants, and  semidiameters  at  unit  distance. 

13.3261  Sidereal  time  The  sidereal  time  was  not  tabulated  explicitly  for  the  first 
sixty  or  seventy  years,  but  from  1833,  values  were  given  at  intervals  of  one  day.  The 
sidereal  time  at  mean  noon  is  stated  to  have  been  calculated  from  the  following 
expressions: 

1833:  Sun's  mean  longitude  +  6'.'0  -  1 6'.'5  sin  Q  -  0'.'9 1 7  sin  2 

1834  1900:  Sun"s  mean  longitude  +  nutation,  where  the  Sun's  mean  longitude 
at  Paris  mean  noon  of  January  0  of  the  year  1800  +  t  is  given  by 
Bessel  (1830a,  p.  xxiv)  as  279° 54' 0 1  '.'36+27 "605 844  r+0"000 1 22 1 805 11  — 


g28  EXPLANATORY  SUPPLEMENT 

I4'47'.'083/.  where  /  is  (for  the  19th  century)  the  number  of  years  from 
the  preceding  leap  year. 

13.3262  Mean  obliquity  of  the  ecliptic  The  following  values  were  used  for  the  years 
1767-1900  (/  being  measured  in  years): 

1767-1807:  23°28'  l6"-x(t-  1756).  Mayer  (1770,  pp.  105  and  v).  Maskelyne  stated 
in  several  almanacs  that  x  was  about  half  a  second,  but  Mayer's  table 
indicates  0"46.  The  values  seem  to  have  been  adjusted  occasionally 
by  Maskelyne. 

1808-1833:  Corrected  year  by  year,  from  Greenwich  observations  to  a  current 
date. 

1834-1863:     23°27'54"8  -  0'.'457(r  -  1800. 0).  Bessel  (1830a,  p.  xxvii). 
1864-1900:    23°27'31"83  -  0'.'476(/  -  1850. 0).  Leverrier  (1858,  p.  203). 

The  authorities  for  the  values  of  the  obliquity  adopted  for  the  conversion  of  the 
Moon's  longitude  and  latitude  to  right  ascension  and  declination  were  (see  A.M.W. 
Downing,  M.N.R.A.S.,  69,  618,  1909): 

1862  1874:     Hansen  (1857,  p.  45:  see  Hansen  and  Olufsen,  1853,  p.  5). 
1875  1900:    Leverrier  (1858,  p.  203). 

Reducing  all  these  to  a  common  date,  for  comparison  with  Peters  (1842)  and 
Newcomb  (1895a),  we  have: 

Mayer  23°27'29"  -  0"46(r  -  1850. 0). 

Bessel  23°27,31'.,95  -  0"457(f  -  1850.0). 

Leverrier  23°27'31"83  -  0'.'476(r  -  1850.0). 

Hansen  and  Olufsen  23°27'3r.'42  -  0'.'46784(f  -  1 850. 0). 

Peters  23°27'30"99  -  0'.'4645(f  -  1850.0). 

Newcomb  23°27'3r.'68  -  0'.'468(r  -  1850.0). 


13.3263  Apparent  obliquity  of  the  ecliptic  Values  of  the  apparent  obliquity  (toOl'l) 
at  intervals  of  three  months  were  published  from  the  inception  of  the  Almanac;  in 
1817  and  1818,  and  again  from  1834,  the  interval  was  changed  to  10  days,  and  in 
1834,  the  precision  was  changed  to  O'.'Ol.  From  1876  to  1895,  the  short-period  terms 
of  nutation  were  included  in  the  apparent  values,  which  were  tabulated  at  intervals 
of  one  day. 

13.3264  Precession  Mayer's  value  (1770,  p.  52)  of  50"3  was  used  in  the  almanac 
from  1767  to  1796,  but  was  corrected  to  50'.'2  from  1797  to  1833,  with  a  corre- 
sponding adjustment  of  Mayer's  values  of  the  mean  motions  of  the  Sun  and  Moon. 


13  /  HISTORICAL  (NFORMATION  g29 

Between  1834  and  1853  there  is  no  specific  statement  of  the  values  used,  but  from 
1854  to  1895  the  annual  (and  daily)  increments  were  given  (to  O'.'OOOl),  and  the 
precession  from  the  beginning  of  the  year  was  tabulated  (to  Ol'Ol)  at  intervals  of 
10  days.  No  authority  is  quoted  for  these  figures.  From  1896  to  1900,  Peters'  value 
(1842,  p.  71)  is  stated  to  have  been  used  as  the  authority. 

The  following  comparison  shows  the  various  values  of  the  annual  precession 
that  were  used  (T  being  measured  in  centuries  from  1850.0): 

1854-1856  (deduced):    50"2357  +  0"025  T. 
1857-1895  (deduced):    50'.'2524  +  0?227  T. 
1896  1900  (Peters):     50"2524  +  0^227  T. 
1901-1959  (Newcomb):     50:'2453  +  0"0222  T. 

13.3265  Nutation  Values  for  nutation  have  appeared  since  1767.  However,  the  terms 
included  have  changed  over  the  years. 

1767  1833:  The  "Equation  of  the  Equinoctial  Points"  (nutation  in  longitude)  was 
tabulated  (to  O'.'l)  for  every  three  months,  but  without  any  indication 
of  the  authority  or  of  the  terms  included.  In  the  years  1817  and  1818, 
the  same  equation  in  sidereal  time  (or  nutation  in  right  ascension) 
was  given  (to  0!01)  at  intervals  often  days. 

1834-1856:  The  tabulated  values  in  longitude  (to  Ol'Ol )  and  in  right  ascension  (to 
0?01 )  at  intervals  of  10  days,  were  based  on  Baily's  (1825)  values  and 
included  the  four  terms  numbered  I,  2,  3,  14  in  Table  13.348.1  (page 
654). 

1857  1880:  The  same  terms  were  tabulated,  and  the  precision  and  the  interval  of 
tabulation  were  unchanged,  but  the  coefficients  were  based  on  Peters 
(1842). 

1881-1892:     Nutation  in  obliquity  was  also  included,  to  a  precision  of  0"01. 
1893-1895:     Two  additional  terms  (5  and  7)  were  included  in  the  tabulations. 
1896:  Long-period  and  short-period  terms  in  both  longitude  and  obliquity 

were  included  in  the  tabulations,  the  interval  of  which  was  one  day. 

Term  no.  15  was  included. 
1897-1900:     Nine  additional  terms  (6,  8-13,  17,  18)  were  included. 

13.3266  Constants    The  following  values  of  the  principal  constants  have  been  used: 


Solar  parallax 


1834-1869 
1870-1881 
1882-1900 


8:'5776       Encke  (1824,  p.  108). 
8'.'95  Leverrier  (1858,  p.  114). 

8'.'848         Newcomb  (1867,  p.  29). 


630 

Constant  of  Aberration 


EXPLANATORY  SUPPLEMENT 


1834-1849:  20"36 
1850-1856:  20'.'42 
1857-1900:  20"4451 


Baily  {1825,  p.  x). 
Baily  (1845,  p.  21). 
Struve  (1844,  p.  275), 


Constant  of  nutation 

1834-1856:    9?25  Baily  (1823,  p.  xiv). 

1857-1900:    9'.'223 1  +  0!'0009  t,    where  T  is  in  centuries  from  1800.0  (Peters,  1842, 
p.  75). 


13.3267  Semidiameters  at  unit  distance  Semidiameters  are  given  for  the  Sun,  Mer- 
cury, Venus,  Mars,  Jupiter  (equatorial  and  polar),  Saturn  (equatorial  and  polar), 
Uranus,  and  Neptune. 


Sun 

1767- 

-1807 

962'.'8 

Mayer  (1770,  p.  56). 

1808- 

-1833 

961"37 

Mayer  (1770,  p.  56). 

1834- 

-1852 

960'.'9 

Bessel  (1830a,  p.  L). 

1853- 

-1895 

961'.'82 

Airy  (1855,  p.  xxviii). 

1896- 

-1900 

961 "18 

Auwers  (from  observations  at  Greenwich,  1851-1883). 

1896- 

-1900 

959"63 

Auwers  (1891,  p.  367)  (This  value  was  used  for  eclipse 

calculations  only.) 

Mercury 

1834-1863:  3'.'23  Lindenau. 
1864-1900:    3'.'34  Leverrier. 


Venus 

1834-1864:  8"25  Delambre. 

1865-1895:  8'.'305  Leverrier. 

1896-1900:  8'.'40  Auwers. 


Mars 


1834: 

1835-1865: 
1866-1895: 
1896-1900: 


4'.'57. 
4'.'435 
5 '.'5  5  [sic] 
4'.'68 


Littrow. 

Leverrier. 

Hartwig. 


13  /  HISTORICAL  INFORMATION 

Jupiter  (equatorial) 


631 


1837-1881:    991704  Struve. 
1882-1895:    98"19  Leverrier. 
1896-1900:    97'.'36  Schur. 


Jupiter  (polar) 

1834:  931'37. 

1835-1856:  93"4 

1857-1881:  92"426 

1882-1895:  92"200 

1896-1900:  91'.'10 


Delambre. 

Equatorial  SD  X  0.927. 
Equatorial  SD  x  0. 939. 
Schur. 


Saturn  (equatorial) 

1834:  88".72. 

1837-1881:  81"106  Bessel. 

1882-1895:  83:'31  Leverrier. 

1896-1900:  84'.'75  Meyer. 


Saturn  (polar) 

1835-1856:  75'.'25 

1857-1881:  75['19 

1882-1895:  74'.'56 

1896-1900:  6'.'88 


Bessel. 

Equatorial  SD  X  0. 927. 
Equatorial  SD  x  0. 895. 
Meyer. 


Uranus 

1834:  37['20. 

1835-1881:  37'.'25  Delambre. 

1882-1895:  34'.'28  Leverrier. 

1896-1900:  34!'28  Hind. 


Neptune 

1899-1900:    34!'56  Barnard;  however,  no  values  were  tabulated. 


1 3.33   The  American  Ephemeris  (1 855-1 900) 

The  twelve  monthly  sections  that  formed  the  principal  content  of  the  first  part  of 
The  American  Ephemeris  contained  the  Greenwich  ephemerides  of  the  Sun  and 


632  EXPLANATORY  SUPPLEMENT 

Moon,  which  remained  virtually  unchanged  during  the  period  1855  to  1900.  The 
Greenwich  ephemerides  of  Venus,  Mars,  Jupiter,  and  Saturn;  similar  ephemerides  of 
Mercury,  Uranus,  and  Neptune;  and  heliocentric  ephemerides  for  all  seven  planets 
were  added  in  1882.  An  ephemeris  of  the  rectangular  coordinates  of  the  Sun  was 
also  included,  although  for  the  period  1875-1881,  it  was  relegated  to  the  second 
part  of  The  American  Ephemeris. 

The  second  part  of  the  book  contained  the  ephemeris  for  the  meridian  of  Wash- 
ington, and  included  further  ephemerides  of  the  Sun,  Moon,  and  planets,  partly  for 
Washington  noon  and  midnight  and  partly  for  meridian  transit  at  Washington. 
These  ephemerides,  which  were  revised  somewhat  from  time  to  time,  included  a 
tabulation  of  the  obliquity,  precession,  and  nutation  until  1882,  when  it  was  trans- 
ferred to  the  first  part  of  the  volume. 

13.331  Sun  In  the  Greenwich  ephemerides  of  the  Sun,  the  apparent  right  ascen- 
sion (to  0?01),  the  declination  (to  0"1),  and  the  equation  of  time  (to  0!01)  were 
tabulated  at  intervals  of  one  day  for  apparent  noon  and  (except  in  1855)  for  mean 
noon.  The  semidiameter  (to  O'.'Ol)  and  the  sidereal  time  of  semidiameter  passing 
the  meridian  (to  0*01 )  were  given  for  apparent  noon.  Except  in  1855,  the  longi- 
tude (to  O'.'l)  referred  both  to  the  true  equinox  of  date  and  to  the  mean  equinox 
of  the  beginning  of  the  year.  The  latitude  (to  O'.'Ol),  and  the  log  radius  vector  (to 
7D)  were  given  for  mean  noon.  In  the  Washington  ephemerides,  the  right  ascension 
and  declination  were  given  for  mean  and  apparent  noon.  The  equation  of  time, 
the  semidiameter,  and  the  sidereal  time  of  semidiameter  passing  the  meridian  were 
given  for  apparent  noon.  From  1855  to  1881,  the  longitude,  latitude,  and  log  radius 
vector  were  given  for  Washington  mean  noon  and  midnight.  The  tabular  precisions 
were  the  same  as  that  in  the  Greenwich  ephemerides. 

During  the  period  1855-1881,  the  equatorial  rectangular  coordinates  of  the 
Sun  (to  7D)  tabulated  for  Greenwich  mean  noon,  referred  to  the  true  equinox  and 
equator  of  date.  For  Washington,  mean  noon  and  midnight,  referred  both  to  the 
true  equinox  of  date  and  the  mean  equinox  of  the  beginning  of  the  year.  In  1882, 
these  ephemerides  were  replaced  by  a  tabulation  (to  7D)  for  Greenwich  mean  noon 
and  midnight,  which  referred  both  to  the  true  equinox  of  date  and  mean  equinox 
of  the  beginning  of  the  year. 

The  horizontal  parallax  (to  O'.'Ol)  and  aberration  (to  O'.'Ol)  of  the  Sun  were 
tabulated  at  intervals  of  10  days,  for  0"  Washington  sidereal  time  from  1855  to 
1864,  for  Washington  mean  noon  from  1865  to  1881,  and  for  Greenwich  mean  noon 
thereafter. 


1855-1857:  Carlini  (1810),  with  Bessel's  revisions  (1828). 

1858-1874:  Hansen  and  Olufsen  (1853). 

1875-1899:  Hansen  and  Olufsen  (1853),  with  aberration  according  to  Struve  (1844). 

1900:  Newcomb  (1895a). 


13  /  HISTORICAL  INFORMATION  533 

13.332  Moon  In  the  Greenwich  ephemerides  of  the  Moon,  the  right  ascension  (to 
0!01)  and  declination  (to  O'.'l)  were  tabulated  for  every  hour;  the  semidiameter  and 
horizontal  parallax  (to  O'.'l)  were  given  for  noon  and  midnight;  and,  from  1860  to 
1900,  the  longitude  and  latitude  (to  0!'l)  were  given  for  noon  and  midnight. 

In  the  Washington  ephemerides,  the  right  ascension  (to  0!01)  and  declination 
(to  0'.'1)  were  tabulated  for  upper  and  lower  culmination  from  1855  to  1864,  and  for 
upper  culmination  from  1882  to  1900.  The  sidereal  time  of  semidiameter  passing 
the  meridian  (to  0!01)  was  given  for  both  culminations  during  the  period  1855- 
1864,  but  only  for  upper  culmination  after  1864.  The  semidiameter  and  horizontal 
parallax  (to  0"1)  were  tabulated  for  Washington  mean  noon  and  midnight  from 
1855  to  1881,  and  for  upper  culmination  from  1882  to  1900. 

The  times  of  the  phases,  apogee,  and  perigee  were  given  both  in  Greenwich 
mean  time  and  in  Washington  mean  time.  The  mean  longitude  and  the  longitude 
of  the  ascending  node  were  given  at  intervals  of  10  days. 


1855-1856:  Pierce  (1853).  These  tables  are  based  on  Airy  (1848),  with  corrections 
by  Airy  (1849)  and  Longstrength  (1853).  The  tables  used  by  Airy 
(1848)  were  derived  from  Damoiseau  (1824),  and  were  substantially  a 
development  of  Plana's  theory  (1832),  modified  to  include  two  Venus 
inequalities  discovered  by  Hansen  (1847). 

1857-1882:  Pierce  (1853),  derives  parallax  from  tables  based  on  formulas  of  Adams 
(1853a)  and  Walker  (1848), 

1883-1900:  Hansen  (1857)  contains  corrections  by  Newcomb  (1878b).  [In  the  In- 
troduction to  The  American  Ephemeris  for  1912  and  following  years, 
attention  was  called  to  the  fact  that  these  corrections  were  not  pre- 
cisely in  accordance  with  the  statement  given  in  the  volumes  for  1883- 
1911,  and  the  formula  actually  used  was  given.] 


13.333  Major  Planets  After  1881,  in  the  Greenwich  ephemerides  of  the  planets, 
the  apparent  right  ascension  (to  0?01)  and  declination  (to  O'.'l)  were  tabulated  for 
mean  noon  at  intervals  of  one  day  for  Mercury,  Venus,  Mars,  Jupiter,  and  Saturn, 
and  at  intervals  of  4  days  for  Uranus  and  Neptune.  The  time  of  meridian  passage 
(to  01"  1)  was  also  given.  The  semidiameter  and  horizontal  parallax  (in  general,  to 
0"1,  and  to  0"01  for  Uranus  and  Neptune  in  1900,  to  0!'01  for  Mercury,  Venus,  and 
Mars)  were  tabulated  at  various  different  intervals  for  different  planets. 

In  the  Washington  ephemerides,  values  were  tabulated  for  the  apparent  right 
ascension  (to  0*01)  and  declination  (to  Oil),  for  the  inferior  planets  at  Washington 
mean  noon  and  meridian  transit,  and  for  the  superior  planets  at  Washington  sidereal 
noon  and  meridian  transit  between  1855  and  1869.  After  1870,  mean  noon  and 
meridian  transit  time  were  used  for  all  the  planets,  but  after  1882  the  ephemerides 
for  noon  were  omitted.  The  semidiameter  and  horizontal  parallax  (to  O'.'Ol)  were 
given  for  0h  Washington  sidereal  time  from  1855  to  1864,  for  Washington  mean 


534  EXPLANATORY  SUPPLEMENT 

noon  from  1865  to  1881,  and  (to  O'.'l)  for  Washington  meridian  transit  beginning 
with  1882.  The  sidereal  time  of  semidiameter  (to  0101)  passing  the  meridian  was 
tabulated  throughout. 

Included  in  the  second  part  of  the  volume  from  1855  to  1881  were  also  helio- 
centric ephemerides  of  the  planets.  The  quantities  tabulated  were  the  rectangular 
coordinates  (to  4D)  for  Mercury,  Venus,  Mars,  and  Neptune;  to  5D  for  Jupiter,  Sat- 
urn, and  Uranus,  and  the  orbital  longitude  (to  O'.l  for  the  inner  planets;  to  1°  for 
the  outer  planets).  The  attraction  on  the  Sun  was  added  in  1961.  During  the  period 
1855-1860,  the  rectangular  coordinates  were  referred  to  the  equinox  and  equator 
of  date;  beginning  with  1861,  they  were  referred  to  the  ecliptic  and  mean  equinox 
of  a  selected  epoch,  and  the  coordinates  of  the  Earth  were  included.  A  table  of  the 
adopted  masses  and  the  orbital  inclinations  and  nodes  was  also  given. 

In  1882,  the  heliocentric  ephemerides  were  replaced  by  different  ones  and  fol- 
lowed immediately  after  the  geocentric  ephemerides  in  Part  I.  These  heliocentric 
ephemerides  contained  the  longitude  and  latitude  (to  O'.'l)  referred  to  the  ecliptic 
and  mean  equinox  of  date.  Also  included  were  the  reduction  to  orbit,  log  radius 
vector  (to  7D);  in  1900,  to  8D  for  Venus  and  Mars,  and  log  geocentric  distance 
(to  7D),  for  Greenwich  mean  noon  at  intervals  of  8  days  for  Uranus  and  Neptune. 
2  days  for  Mercury  (one  day  in  1900),  and  4  days  for  the  other  planets  (2  days 
for  Venus  and  Mars  in  1900).  Log  geocentric  distance  was  also  given  for  the  dates 
between  the  tabular  dates. 

During  the  years  preceding  the  completion  of  the  planetary  tables  of  Newcomb 
and  Hill,  the  ephemerides  were  calculated  with  tables  that,  for  the  most  part,  were 
constructed  by  applying  corrections  to  the  early  tables  of  Lindenau  and  Bouvard 
that  were  based  upon  Laplace's  theories. 


Mercury 

1855-1899:  Winlock  (1864),  based  on  the  theory  of  Leverrier  (1845). 
1900:  Newcomb  (1895b). 


Venus 

1855-1875:  Manuscript  tables  prepared  from  Lindenau  (1810)  by  applying  cor- 
rections based  on  investigations  by  Airy  (1832),  Breen  (1848),  and 
Leverrier  (1841). 

1876-1899:     Hill  (1872).  (An  ephemeris  for  1874-1875  calculated  from  these  tables 

is  given  in  the  Appendix  to  the  1876  volume.) 
1900:  Newcomb  (1895c). 


13  /  HISTORICAL  INFORMATION 


635 


Mars 

1855-1899:  Manuscript  tables  based  on  Lindenau  (1811),  with  corrections  from 
Breen  (1851)  and  Leverrier  (1841),  and  various  other  corrections  from 
time  to  time. 

1900:  Manuscript  tables,  based  on  the  elements  derived  by  Newcomb  (1895d). 


Jupiter 

1855-1897:     Manuscript  tables,  prepared  from  Bouvard  (1821),  with  corrections 

to  make  them  agree  with  observation. 
1898-1900:     Hill  (1895a).  (In  the  1898  volume,  it  is  incorrectly  stated  that  Bou- 

vard's  tables  were  used  for  that  year.) 


Saturn 

1855-1882:     Manuscript  tables  prepared  from  Bouvard  (1821),  with  various  cor- 
rections from  time  to  time. 
1883-1899:     Manuscript  tables  prepared  from  a  provisional  theory  by  Hill  (1890). 
1900:  Hill  (1895b). 


Uranus 

1855-1875:     Bouvard  (1821),  with  revisions  by  Leverrier  (1846)  and  Peirce  (1848a), 

and  beginning  with  1859,  further  corrections  by  Runkle  (1855). 
1876:  Manuscript  tables  constructed  by  Newcomb. 

1877-1900:     Newcomb  (1873).  (An  ephemeris  for  1873-1876  calculated  with  these 
tables  is  given  in  the  1877  volume.) 


Neptune 

1855-1869:     Tables  based  on  Peirce's  theory  (1848b)  and  Walker's  elements  (1848). 

(Ephemerides  for  1853  and  1854  were  given  in  the  volumes  for  1855 

and  1856,  respectively.) 
1870-1900:     Newcomb  (1865).  (An  ephemeris  for  1866-1869  calculated  from  these 

tables  is  given  in  the  Appendix  to  the  1869  volume.) 


13.334  Minor  Planets  Among  the  early  tables  constructed  and  printed  for  The 
American  Ephemeris  were  tables  of  the  minor  planets  ( 15)  Eunomia.  (40)  Harmonia, 
(18)  Melpomene,  and  (11)  Parthenope.  Ephemerides  of  these  minor  planets  were 
not  included  in  The  American  Ephemeris,  but  an  "Asteroid  Supplement"  in  the 
volume  for  1861  contained  opposition  ephemerides  for  33  minor  planets  for  1859, 
and  the  orbital  elements  of  (l)-(55). 


636  EXPLANATORY  SUPPLEMENT 

13.335  Satellites  In  the  volumes  for  1855-1881,  ephemerides  were  given  only  for 
the  four  great  satellit  es  of  Jupiter,  and  the  apparent,  elements  of  the  rings  of  Saturn. 
The  ephemerides  of  the  satellites  of  Jupiter  gave  the  superior  geocentric  conjunc- 
tions, the  phenomena,  the  coordinates  in  the  mean  apparent  eclipses,  and  diagrams 
of  the  phases  of  the  eclipses. 

In  1882,  diagrams  of  the  configurations  of  the  four  satellites  of  Jupiter  were 
added,  and  the  former  ephemerides  of  the  coordinates  in  the  apparent  orbits  were 
omitted.  A  diagram  of  the  apparent  orbits  was  also  added.  Ephemerides  of  the 
elongations  of  the  satellites  of  Mars,  Saturn,  Uranus,  and  Neptune,  and  diagrams 
of  the  apparent  orbits,  were  introduced. 

The  elongations  of  the  fifth  satellite  of  Jupiter  were  added  in  1898,  but  no 
statement  of  authority  was  given  from  1898  to  1900.  No  authority  was  given  for  the 
satellites  of  Mars  from  1882  to  1900.  The  authorities  for  the  other  satellites  were: 

Jupiter 

L8SS-1881:     Damoiseau  (1836).  Extended  to  1880  by  Kendall  (1877). 

1882-1900:  For  elongations  and  eclipses,  Todd's  (1876)  continuation  of  Damoi- 
seau; for  occupations,  transits,  etc.,  Woolhouse  (1833),  with  Table  II 
for  each  satellite  adapted  to  Damoiseau. 

Saturn 

1855-1900:     For  rings,  except  the  dusky  ring,  Bessel  (1875a  and  1875b). 
1882-1900:     For  satellites,  manuscript  tables  prepared  by  Newcomb. 

Uranus  and  Neptune 
1882-1900:     Newcomb  (1875). 

13.336  Auxiliary  Quantities 

13.3361  Sidereal  time  The  sidereal  time  (to  0!01 )  was  tabulated  for  every  Wash- 
ington mean  noon,  and  (except  in  1855)  for  every  Greenwich  mean  noon.  In  the 
Greenwich  ephemeris,  except  in  1855,  the  mean  of  0h  sidereal  time  (to  0?01)  was 
also  given  for  every  day. 

13.3362  Obliquity  of  the  ecliptic  The  adopted  expressions  and  authorities  for  the 
mean  obliquity  were: 


1855-1881:     23°27'54,.,22  -  0:,4645  f-O'.'OOOOOUf2,  where  t  is  reckoned  in  years  from 
1800  (Peters,  1842). 


13  /  HISTORICAL  INFORMATION  537 

1882-1899:    23°27'3 1  ,.'42-0,.'46784  r,  where  t  is  reckoned  in  years  from  1850  (Hansen 
and  Olufsen,  1853). 

1900:  23°27'08"26  -  0'.'468/,  where  /  is  reckoned  in  years  from  1900  (New- 

comb, 1895d). 

The  apparent  obliquity  (to  0'.'01)  was  tabulated  at  intervals  of  10  days  (5  days 
in  1900),  for  0h  Washington  sidereal  time  from  1855  to  1864,  for  Washington  mean 
noon  from  1865  to  1881,  and  for  Greenwich  mean  noon  thereafter. 

The  obliquity  actually  used  in  calculating  the  ephemerides  of  the  Sun,  Moon, 
and  planets  in  the  volumes  for  1865-1899  was  taken  from  Hansen  and  Olufsen 
(1853).  In  1900,  it  was  taken  from  Newcomb  (1895a). 

13.3363  Precession  For  the  general  precession  in  longitude,  the  expression  given 
by  Peters  (1842)  50'.'2411  +  0"0002268 /,  where  t  is  reckoned  in  years  from  1800— 
was  used  until  1900,  when  the  value  given  by  Newcomb  (1895d)  was  adopted— 
50"2482  +  0:'00022/,  where  t  is  reckoned  in  years  from  1900. 

The  amount  of  precession  (to  0"01 )  since  the  beginning  of  the  year  was  tabulated 
at  intervals  of  10  days  (5  days  in  1900)  for  &  Washington  sidereal  time  from  1855- 
1864,  for  Washington  mean  noon  during  1865-1881,  and  for  Greenwich  mean  noon 
thereafter. 

13.3364  Nutation  From  1855  to  1899,  the  term  ''equation  of  the  equinoxes  in  lon- 
gitude" was  used  for  the  nutation  in  longitude.  The  nutations  in  obliquity  used  for 
the  computations  relating  to  the  stars  were  calculated  from  the  formulas  given  by 
Peters  (1842).  The  formulas  of  Peters  were  given  in  the  appendix  to  the  volume  for 
1855;  during  later  years,  provision  was  made  for  including  additional  small  terms 
when  required.  In  the  volume  for  1900,  the  nutations  of  obliquity  were  taken  from 
Newcomb  (1895a). 

From  1865  to  1891.  the  apparent  obliquity  and  nutation  used  in  the  ephemerides 
of  the  Sun,  Moon,  and  planets  were  taken  from  Hansen  and  Olufsen  (1853).  In  1900. 
the  obliquity  and  the  long-period  nutation  were  taken  from  Newcomb  (1895a). 

The  equation  of  the  equinoxes  in  longitude  (to  Ol'Ol)  and  in  right  ascension  (to 
0?01)  for  1855-1877,  and  to  0!001  for  1878-1900  were  tabulated  at  intervals  of  10 
days  (5  days  in  1900)  for  0\  Wishington  sidereal  time  in  1855-1864,  for  Washington 
mean  noon  in  1865-1881,  and  for  Greenwich  mean  noon  thereafter.  In  1900,  the 
nutation  in  obliquity  (to  0"01)  was  also  explicitly  tabulated  at  intervals  of  5  days. 

13.3365  Constants  The  values  and  authorities  used  for  solar  parallax,  constant  of 
aberration,  and  constant  of  nutation  are  as  follows: 

Solar  parallax 


1855-1869:    8!'5776       Encke  (1824). 


638  EXPLANATORY  SUPPLEMENT 

1870-1899:    8'.'848         Newcomb  (1867). 

1900:  8"80  Paris  (1896).  (This  value  was  used  for  eclipse  calculations 

from  1896  onward.) 


Constant  of  aberration 

1855-1899:  20'.'4451  Struve  (1844).  (In  the  ephemeris  of  the  Sun  for  1869- 
1874,  the  value  20'.'255  from  Hansen  and  Olufsen  (1853) 
was  used.) 

1900:  201'47         Paris  (1896). 


Constant  of  nutation 

1855-1899:  91'2231  +  0"0009  T,  where  T  is  in  centuries  from  1800.0.  Peters  (1842). 
1900:  9'.'21  at  1900.0    Paris  (1896). 


13.3366  Semidiameters  The  values  and  authorities  for  the  Sun,  Moon,  and  plan- 
ets are: 


Sun 

1855-1899:     16'02"  at  mean  distance  (Greenwich  observations). 

1883-1899:     In  the  calculation  of  eclipses,  15'59:'78  (Bessel  1830a). 

1900:  15'59'.'63  at  mean  distance  (Auwers  1891).  This  value  was  used  in 

calculating  eclipses,  but  in  the  ephemeris  of  the  Sun,  lll5  was  added 

to  it  for  irradiation. 

Moon 

1855-1868:     Burkhardt's  (1812)  value  increased  by  1/500  part. 
1869-1900:     0.272274  =  2"5  for  irradiation;  the  irradiation  was  omitted  in  the 
calculation  of  eclipses  and  occupations. 

Planets 


log  distance 

1855- 

1900: 

Mercury 

3'.'34 

0.00 

Venus 

8"546 

0.00 

Mars 

21'842 

0.25 

Jupiter 

18:78 

0.70 

Saturn 

8*77 

0.95 

Uranus 

1'.'68 

1.30 

1882- 

1900: 

Neptune 

1  "28 

1.48 

13  /  HISTORICAL  INFORMATION 


639 


The  value  for  Mercury  was  taken  from  Leverrier;  the  others  were  determined 
by  Peirce  from  observations  in  1845  and  1846  with  the  mural  circle  at  Washington. 
The  values  for  Jupiter  and  Saturn  were  the  polar  semidiameters.  It  was  stated  in 
the  1869  volume  that  19'.'19  was  erroneously  used  in  1858-1869  for  Jupiter  in  the 
Washington  ephemeris.  In  the  volumes  for  1869-1900,  the  equatorial  semidiameter 
of  Jupiter  was  given  as  20"00  at  log  distance  0.70,  and  that  of  Saturn  as  9"38  at  log 
distance  0.95,  without  authority. 

1 3.34    The  Nautical  Almanac,  and  The  American  Ephemeris  (1 901  -1 983) 

The  details  given  in  this  section  and  The  Astronomical  Almanac  for  1901  to  1959 
refer  specifically  to  The  Nautical  Almanac.  Differences  in  the  corresponding  editions 
of  The  American  Ephemeris  are  specially  noted  in  brackets  in  which  "A.E."  refers 
only  to  The  American  Ephemeris. 

From  1960  through  1980,  The  Astronomical  Ephemeris  and  Nautical  Almanac 
and  The  American  Ephemeris  and  Nautical  Almanac  were  completely  in  agreement, 
scientifically.  Beginning  in  1981,  The  Astronomical  Almanac  replaced  those  two 
publications  and  was  printed  in  a  single  printing.  For  the  edition  for  1968,  the  IAU 
System  of  Astronomical  Constants  was  introduced.  The  supplement  to  the  1968 
publications  gives  the  details  of  the  changes  to  the  ephemerides  as  a  result  of  this 
new  value  of  constants. 

13.341  Sun  The  quantities  tabulated,  generally  with  argument  mean  time, 
are  substantially  the  same  as  before:  longitude,  latitude,  right  ascension,  decli- 
nation, and  log  radius  vector;  the  precision,  normally:  O'.'l,  0'.'01,  0?01,  and  7D;  and 
(except  for  the  mean  longitude  and  anomaly  and  the  equatorial  rectangular  coor- 
dinates) the  interval  one  day.  The  mean  longitude  (to  0?00001  for  1906-1911,  and 
to  0?0001  since  1912)  was  given  at  intervals  of  10  days  since  1906.  [In  A.E.,  the 
mean  longitude  (to  0?0001),  at  intervals  of  5  days,  was  given  since  1934.]  Equato- 
rial rectangular  coordinates  (to  7D)  was  referred  to  the  true  equator  and  equinox 
of  date,  with  reductions  to  those  of  the  beginning  of  the  year,  were  given  at  inter- 
vals of  12"  and  until  1930,  while  similar  coordinates  at  intervals  of  one  day  for  the 
equinox  of  the  beginning  of  the  year  were  tabulated  since  1931,  and  those  for  the 
standard  equinox  of  1950.0  (Comrie,  1926)  since  1928.  (The  coordinates  for  1928 
were  given  in  the  volume  for  1929.)  [In  A.E.,  the  interval  of  12"  was  retained  until 
1950;  from  1931  to  1950  the  coordinates  were  referred  to  the  beginning  of  the  year, 
and  the  reductions  to  the  true  equinox  of  date  were  also  tabulated.  Coordinates  for 
1950.0  were  tabulated  since  1938,  at  intervals  of  12h  until  1950,  and  intervals  of  one 
day  from  1951.]  Since  1954  [in  A.E.,  since  1953]  the  coordinates  on  the  "standard" 
10-day  dates  (IAU,  1950)  were  emphasized  by  the  use  of  bold  type. 


640  EXPLANATORY  SUPPLEMENT 

Longitude,  referred  to  the  mean  equinox  of  the  beginning  of  the  year,  was 
included  from  1931  to  1937  [in  A.E.,  from  1901  to  1915  and  from  1931  to  1951], 
Longitude  and  latitude,  which  referred  to  the  mean  equinox  (to  0?00001 )  of  1950.0, 
were  tabulated  at  intervals  of  one  day  from  1928  to  1937  [not  in  A.E.];  from  1938 
to  1959  [also  in  A.E.]  longitude  (to  0"1),  latitude  (to  0'.'01)  were  given.  [In  A.E., 
latitude  referred  to  ecliptic  of  date  given  during  1901  1959.]  Natural  values  of  the 
radius  vector  (to  7D)  were  introduced  in  1928  [in  A.E.,  in  1938],  the  logarithmic 
value  being  omitted  from  both  almanacs  in  1983. 

From  1960  to  1980,  the  longitude  of  the  Sun  was  given  with  respect  to  the  mean 
equinox  of  the  beginning  of  the  year.  Starting  in  1981,  the  ecliptic  longitude  was 
given  for  the  mean  equinox  of  date.  The  geocentric  rectangular  coordinates  of  the 
Sun  were  omitted  in  1981  but  reinstated  from  1982  onward,  and  given  with  respect 
to  the  mean  equator  and  equinox  of  1950.0  through  1983. 


1901-1980:  Newcomb  tables  (1895a). 
1981-1983:     Newcomb  theory  (1895a). 


13.342  Moon  Values  of  the  longitude  and  latitude  (to  0'.'1),  of  the  parallax  (to 
0'.'01)  [in  A.E.,  (to  O'.'l )  until  1912],  and  of  the  semidiameter  (to  O'.'Ol)  [in  A.E.,  until 
1939]  were  tabulated  at  intervals  of  12\  Values  of  the  right  ascension  and  declination 
(to  0!01  and  O'.'l)  were  given  at  intervals  of  one  hour,  while  lunar  distances  continued 
to  appear  until  1906  [in  A.E.,  until  1911],  and  examples  of  their  calculation  were 
given  in  the  issues  for  1907-1919  [in  A.E.,  for  1912-1935].  Elements  of  the  mean 
equator  and  orbit  have  been  included  throughout.  [The  angular  distance  from  the 
Sun  (to  O'.l)  was  given  in  A.E.  from  1937  to  1941,  and  to  l'.O,  thereafter.] 

In  1981,  the  hourly  ephemeris  of  the  Moon  was  replaced  by  a  daily  ephemeris 
in  polynomial  form  for  interpolation.  The  apparent  longitude  and  latitude  (each  to 
0?01)  of  the  Moon  were  given  only  daily  from  1981  onward. 


1901-1922:     Hansen  (1857)  with  Newcomb's  corrections  (1878b)  to  right  ascension. 

declination,  parallax,  and  semidiameter  from  1901  to  1914,  and  to 
longitude  and  latitude  (before  conversion  to  equatorial  coordinates) 
from  1915  to  1922.  [A.E.  for  1912  states  that  Newcomb's  formula  for 
the  correction  to  Hansen's  mean  longitude  was  not,  in  fact,  used  for 
the  years  1883  to  1911.  The  formula  actually  used  was  quoted.] 

1923-  1959:  Brown  (1919).  It  is  to  be  noted  that  the  values  of  the  longitude  (and 
correspondingly  of  the  right  ascension  and  declination)  for  the  year 
1923  require  a  small  correction  of  +0'.'08cos(f  -  /"")- 

1959-1983:     Brown's  theory  as  given  in  the  Improved  Lunar  Ephemeris  (1954). 


13.343  Major  Planets  Values  of  the  apparent  right  ascension  and  declination  to 
0!01  and  O'.'l  were  tabulated  at  intervals  of  one  day  throughout  the  period.  [In  A.E., 


13  /  HISTORICAL  INFORMATION  54-) 

the  interval  for  Uranus  and  Neptune  was  4  days  until  1935.]  Log  distance  at  the 
same  interval  and  to  7D  was  given  until  1934  for  Mercury  and  until  1940  for  the 
other  planets.  [In  A.E.,  the  intervals  until  1915  were  12h  for  Mercury,  one  day  for 
Venus  and  Mars,  2  days  for  Jupiter  and  Saturn  and,  from  1916,  one  day  for  each  of 
these  five;  for  Uranus  and  Neptune,  it  was  4  days  from  1901  to  1935.]  Natural  values 
of  the  distance  (to  6D  for  Mercury  to  Jupiter,  and  to  5D  Saturn  to  Neptune)  were 
given  since  1935  for  Mercury  and  since  1941  for  the  other  six  planets  at  intervals 
of  one  day. 

Heliocentric  longitude  and  latitude  (to  0"1),  referred  to  the  mean  equinox  of 
date,  and  log  radius  vector  (to  7D)  were  tabulated  at  intervals  of  one  to  four  days 
until  about  1915,  and  thereafter  they  were  given,  in  the  appendices  to  various 
almanacs  between  1915  and  1920,  at  wider  intervals  (up  to  40  days)  for  the  period 
up  to  1940  [in  A.E.,  at  intervals  of  one  to  ten  days  throughout  the  period  1901- 
1959].  The  first  two  volumes  of  Planetary  Co-ordinates  (H.M.N. A.O.,  1933  and 
1939)  contained  similar  coordinates  (to  0P001)  or  0P0001,  but  referred  to  the  mean 
equinox  of  1950.0,  and  natural  values  of  the  radius  vector  (to  4D  or  5D)  for  the 
period  1920  to  1960,  except  that  no  tabulations  are  given  for  Mercury  and  Pluto. 
The  volumes  also  contained  coordinates  of  the  four  outer  planets  Jupiter,  Saturn, 
Uranus,  and  Neptune  for  1800  to  1920. 

Astrometric  right  ascensions,  declinations,  and  distances  of  Pluto  have  been 
included  since  1950,  but  no  heliocentric  coordinates  of  this  planet  have  been  given. 
[In  A.E.,  heliocentric  longitude  and  latitude  (to  0"1)  and  log  radius  for  the  period 
1960-1983,  the  right  ascensions  (to  0!001)  and  declinations  (to  0"01)  of  the  outer 
planets  were  tabulated.] 

Mercury  and  Venus 

1901-1980:     Newcomb  Tables  (1895b  and  1895c). 
1981-1983:     Newcomb  Theories  (1895b  and  1895c). 

Mars 

1901:  Leverrier  (1861b).  [In  A.E.,  tables  in  manuscript  constructed  from 

elements  by  Newcomb  (1895d).] 

1902:  Leverrier  (1861b).  [In  A.E.,  Newcomb  (1898).] 

1903-1921:  Newcomb  (1898a). 

1922- 1980:  Newcomb  Tables  (1898a)  with  Rosa's  corrections  (1917). 

1981-1983:  Newcomb  theory  (1898a)  with  Rosa's  corrections  (1917). 

Jupiter  and  Satuim 


1901-1959:     Hill  (1895A  and  1895b). 


642  EXPLANATORY  SUPPLEMENT 

Uranus 

1901-1903:  Leverrier  (1877a).  [In  A.E.,  Newcomb  (1865).] 

1904-1959:  Newcomb  (1898b). 

1901-1902:  Leverrier  (1877b).  [In  A.E.,  Newcomb  (1865).] 

1903:  Leverrier  (1877b).  [In  A.E.,  Newcomb  (1898c).] 

1904-1959:  Newcomb  (1898c). 

Pluto 

1950-1959:     Bower  (1931), 

Jupiter,  Saturn,  Uranus,  Neptune,  and  Pluto 

1960-1983:     Eckert,  Brouwer  and  Clemence  (1951).  Geocentric  ephemerides  only 
include  perturbations  by  inner  planets  (Clemence,  1954). 

13.344  Minor  Planets  Elements  and  ephemerides  of  the  first  four  minor  planets 
were  published  as  in  previous  years  [not  in  A.E.]  from  1901  to  1913;  ephemerides 
alone  were  given  in  1914  and  1915.  Thereafter,  no  tabulations  were  given  until 
1952.  Since  that  year  ephemerides  have  been  included  to  cover,  at  intervals  of  one 
day,  the  periods  during  which  transit  occurs  between  sunset  and  sunrise  at  (most) 
fixed  observatories.  Although  in  1958,  the  period  of  tabulation  was  altered  to  that 
period  of  time  during  which  the  planet  is  "not  within  about  40°  of  the  Sun."  The 
quantities  given  were  apparent  right  ascension  and  declination  (to  0*01  and  0'.'1) 
with  corrections  "astrometric  minus  apparent,"  and  distance  (to  6D). 

Starting  in  1981  astrometric  positions  (to  0s.l)  and  declination  (to  l'.'O),  respec- 
tively, were  tabulated  at.  two-day  intervals  for  Ceres,  Pallas,  Juno,  and  Vesta.  In 
addition,  opposition  dates,  magnitudes,  and  osculating  elements  were  given  for  the 
brighter  minor  planets  coming  to  opposition  during  the  year. 

The  basis  of  the  tabulation  has  been: 

Ceres 

1901-1915:     Godward  (1878). 
Pallas 

1901-1915:     Farley  (1856a). 
Juno 


1901-1915:     Hind  (1855),  with  corrections  by  Downing  (1890). 


13  /  HISTORICAL  INFORMATION 

Vesta 


643 


1901-1906:  Farley  (1856b). 
1907-1915:     Leveaau  (1896). 

Ceres,  Pallas,  Juno,  and  Vesta 

1952-1959:     Herget,  Clemence,  and  Hertz  (1950). 
1960-1971:     Herget  (1962). 
1972-1983:     Duncombe  (1969). 

13.345  Satellites  Satellite  information  is  given  for  Mars,  Jupiter,  Saturn,  Uranus, 
Neptune,  and  Pluto. 

13.3451  Mars  Diagrams  of  the  apparent  orbits  and  times  of  elongations  to  a  pre- 
cision of  ,  were  given  for  a  period  of  a  month  on  each  side  of  opposition  from 
1931  to  1980.  From  1931  [in  A.E.  from  1920],  tables  were  added  for  calculating  the 
position  angle  and  apparent  distance  of  each  satellite  from  the  planet  at  any  time 
during  the  same  period.  From  1981,  times  of  each  eastern  elongation  for  Deimos 
and  every  third  eastern  elongation  for  Phobos  were  given  for  the  entire  year.  Tables 
for  calculating  the  position  angle  and  apparent  distance  were  also  extended  to  cover 
the  entire  year. 

1901-1902:     Elements  by  Hall  (1878).  [In  A.E.,  those  of  Harshman.] 
1903-1915:     Elements  by  Harshman  (1894). 
1916-1983:     Elements  by  Struve  (1911,  p.  1073). 

13.3452  Jupiter  Phenomena  and  configurations  of  Satellites  I-IV  are  given  from 
1901,  with  considerable  variation  from  time  to  time  in  the  precision,  which  is  usually 
higher  for  eclipses  than  for  other  phenomena.  Elongations  every  twentieth  on  each 
side  of  Satellite  V  were  given  in  1906-1980  [in  A.E.  1901-1980].  From  1981,  times  of 
every  twentieth  eastern  elongation  have  been  given  for  the  whole  year.  Differential 
coordinates  of  Satellites  VI  and  VII  have  been  given  since  1931  [in  A.E.  since  1912]. 
Sidereal  periods  of  Satellites  VIII  to  XI,  and  XII  have  been  included  since  1953  and 
1957.  The  sidereal  period  of  Satellite  XIII  was  introduced  in  1984.  Differential 
coordinates  of  Satellites  VIII  to  XIII  were  introduced  in  1981. 

Satellites  [-TV 

1901-1913:     Damoiseau  (1836)  and  later  extensions.  [In  A.E.,  also  Woolhouse 
(1833).] 

1914-1915:     Sampson  (1910).  [In  A.E.,  Damoiseau  and  extensions  and  Woolhouse.] 


g44  EXPLANATORY  SUPPLEMENT 

1916:  Sampson  (1910),  with  Andoyer's  (1915)  modifications.  [In  A.E.  until 

1930,  the  configuration  are  attributed  to  Pottier's  (1896)  continuation 
of  Damoiseau.] 


Satellite  V 


1901-1905 
1906-1915 
1916-1959 


1960-1983: 


[In  A.E.  only,  Robertson's  elements  (unpublished).] 
Chon  (1897).  [In  A.E.,  Robertson.] 

Robertson  (1924).  [In  A.E.;  1930-1933,  "from  Connaissance  des  Temps 
for  1915";  1934-1959,  "from  Connaissance  des  Temps  every  year  be- 
ginning with  1919".] 
van  Woerkom  (1950). 


Satellites  VI- VII 


1912-1930:     [In  A.E.  only,  Ross  (1907a  and  1907b).] 
1931-1947:     Ross  (1907a  and  1907b). 
1948-1983:    Bobone  (1937a  and  1937b). 


Satellites  VIII-XII 


1981-1983:     Herget  (1968). 


Satellite  XIII 


1981-1983:     Aksnes  (1978). 


13.3453  Saturn  Until  1980,  diagrams  were  given  for  part  of  each  year  of  the  orbits 
of  Satellites  I- VII.  The  volume  also  included  times  of  elongations  and  conjunctions 
of  Satellites  I- VIII  to  a  precision  of  06.1.  Beginning  in  1981,  the  tables  cover  the 
entire  year.  Differential  coordinates  of  Satellite  IX  (Phoebe)  were  introduced  in 
1931  [in  A.E.  in  1909],  as  well  as  those  of  Satellites  VII  and  VIII  [in  A.E.  in  I960]. 
Elements  for  determining  the  distance  and  position  angle  were  added  in  1931  [in 
A.E.  in  1912].  During  1935-1959,  The  Nautical  Almanac  [not  A.E.]  contained,  for 
about  nine  months  in  each  opposition,  quantities  to  assist  in  the  calculation  of  the 
phenomena  (eclipses,  occulations,  transits,  and  shadow  transits)  of  Satellites  I- VI. 


Satellites  I-V:  Mimas,  Enceladus,  Tethys,  Dione.  and  Rhea 


1901-1915:     Tables  in  manuscript  "prepared  by"  Newcomb,  except  the  elongations 
of  Satellites  I  (Mimas)  and  III  (Tethys),  which  are  from  H.  Struve 


13  /  HISTORICAL  INFORMATION  045 

(1898).  [In  A.E.;  1901-1903,  Hall  (1886);  1904,  Hall,  except  the  elon- 
gations of  Satellites  I  and  III  (from  Struve,  1898);  1905-1913,  Struve 
(1898);  1914-1915,  Struve  (1888,  1898,  and  1903).] 

1916-1930:     Struve  (1888,  1898,  and  unpublished  corrections). 

1931-1935:     H.  Struve  (1888,  1898,  and  1903)  and  G.  Struve  (1924). 

1936-1983:     G.  Struve  (1924  and  1930). 


Satellite  VI  (Titan) 


1901-1915: 

1916-1930 
1936-1937 
1938  1983 


Newcomb's  manuscript  tables.  [In  A.E.:  1901-1904,  Hall  (1886);  1905- 

1913,  Struves  (1898);  1914-1915,  Struve  (1888,  1898,  and  1903).] 

Struve  (as  for  Satellites  I-V). 

G.  Struve  (1933).  [In  A.E.,  H.  Struve,  as  in  1931.] 

G.  Struve  (1933). 


Satellite  VII  (Hyperion) 

1901-1915:     Newcomb's  manuscript  tables.  [In  A.E.:  1901-1902,  Eichelberger  (1892); 

1903-1913,  Struve  (1898);  1914-1915,  Struve  (as  for  Satellite  VI).] 
1916-1935:     Struve  (as  for  Satellite  VI). 
1936-1983:     Woltjer  (1928). 


Satellite  VIII  (Iapetus) 

1901-1902:     As  for  Satellite  VII.  [In  A.E.,  Hall  (1885).] 
1903-1935:     As  for  Satellite  VII. 
1936-1937:     H.  Struve  (1888,  1898,  and  1903). 
1938-1983:     G.  Struve  (1933). 


Satellite  IX  (Phoebe) 

1909-1930:  [In  A.E.  only,  Ross  (1905).] 
1931-1983:     Ross  (1905). 


13.3454  Uranus  Diagrams  of  the  orbits  of  Satellites  I-IV,  and  times  of  el<  >ng;it  ions 
to  a  precision  of  0*1  were  given  for  about  nine  months  in  each  opposition  in  1901 
1980.  Elements  for  the  calculation  of  distance  and  position  angle  were  included  in 
1927  [in  A.E.,  in  1912].  From  1981,  the  times  of  elongations  and  elements  for  cal- 
culating the  distance  and  position  angle  have  been  given  for  the  entire  year.  The 
sidereal  period  of  Satellite  V  (Miranda)  was  added  in  1953.  In  1981,  elements  for 
the  rings  of  Uranus  were  introduced,  as  well  as  times  of  eastern  elongation  and 
tables  for  the  calculation  of  the  distance  and  position  angle  of  Satellite  V. 


646 

Satellites  I-IV 


EXPLANATORY  SUPPLEMENT 


1901-  1915:     Newcomb  (1875). 

Satellites  I  and  II 
1916-1983:  Newcomb. 

Satellites  III  and  IV 
1913-1983:    Struve  (1913). 

Rings 

1981-1983:     Elliot  et  al.  (1978). 
Satellite  V 

1981-1983:     Dunham  (1971). 

13.3455  Neptune  Diagrams  of  the  orbit  of  Triton,  and  times  of  elongations  to  a 
precision  of  (Kl,  were  given  for  about  ten  months  in  each  opposition  in  1901-1980. 
Elements  for  the  calculation  of  distance  and  position  angle  were  included  in  1927 
[in  A.E.,  in  1912].  From  1981,  times  of  elongation  and  tables  for  the  calculation  of 
distance  and  position  angle  covered  the  whole  year.  The  sidereal  period  of  Nereid 
was  added  in  1953.  Times  of  eastern  elongation,  and  tables  for  the  calculation  of 
distance  and  position  angle  of  Nereid  were  added  in  1981. 

Triton 

1901:  Newcomb  (1875).  [In  A.E.,  Hall  (1898).] 

1902-  1929:  Hall  (1898). 

1930-1983:  Eichelberger  and  Newton  (1926). 
Nereid 

1981-1982:  Rose  (1974). 

1983:  Mignard  (1981). 

13.3456  Pluto    In  1981,  times  of  northern  elongation  were  added  for  Charon. 


1981:  Christy  and  Harrington  (1978). 

1982-1983:     Harrington  and  Christy  (1981). 


13  /  HISTORICAL  INFORMATION 


647 


13.346  Auxiliary  Quantities  Auxiliary  quantities  given  are  sidereal  time,  obliq- 
uity of  the  ecliptic,  precession,  nutation  (for  both  The  Nautical  Almanac  and  The 
American  Ephemeris),  and  constants. 

13.3461  Sidereal  time    The  entries  for  sidereal  time  include: 

1901-1932:  The  tabulated  values  (to  0101)  at  intervals  of  one  day  were  based  on 
Newcomb's  value  (1895a)  for  the  right  ascension  of  the  mean  Sun  af- 
fected by  aberration— 18h38m45!836  +  86401841542  T+0!0929  T2,  where 
T  was  measured  in  Julian  centuries  from  1900  January  0  at  12h  UT, 
and  included  the  effect  of  long-period  terms  only  of  nutation. 

1933-1959:  The  precision  was  changed  to  01001,  and  the  effect  of  short-period 
terms  of  nutation  was  included  also. 

1960-1983:  Tabulated  separately  for  both  apparent  and  mean  equinox.  Universal 
Time  of  transit  of  first  point  of  Aries  also  tabulated. 

13.3462  Obliquity  of  the  ecliptic  Newcomb's  value  (1895a)  for  the  mean  obliquity 
was  used  throughout:  23°27,08,.'26-46'.,845  7'-0'.'0059r2+0'.'00181  P.  [In  addition, 
A.E.  includes  values  attributed  to  Hansen  and  to  Peters  for  the  years  1901  to  1915, 
also  those  due  to  Leverrier  for  the  years  1902  to  1915.] 

Values  of  the  true  obliquity  (to  O'.'Ol )  excluding  the  effect  of  short-period  terms 
of  nutation  were  given  at  intervals  of  one  day  until  1930  [in  A.E.,  until  1933;  and  at 
intervals  of  5  days  from  1934  to  1959].  From  1931  to  1959,  only  the  mean  obliquity 
for  the  beginning  of  the  year  and  the  daily  nutation  in  obliquity  were  given.  From 
1960  to  1980,  the  obliquity  of  the  ecliptic  was  given  daily  with  the  Solar  ephemeris 
and  after  that  it  was  given  with  the  Besselian  day  numbers. 

13.3463  Precession  The  values  given  were  based,  throughout  the  period,  on  New- 
comb's determination  (1897,  p.  73)— 50"2564  +  0'.'0222  7'  [A.E.  for  the  years  1901 
to  1911  also  gave  values  based  on  Peters  (1842).] 

Values  of  the  precession  (to  O'.'Ol )  from  the  beginning  of  the  year  were  tabulated 
at  intervals  of  one  day  [in  A.E.,  5  days  until  1915],  while  the  daily  and  annual 
increments  (to  O'.'OOOl)  were  given  until  1930  [in  A.E.,  until  1915], 

From  1931  [not  in  A.E.]  additional  precessional  constants,  and  tables  for  reduc- 
tion of  star  positions,  were  included  also.] 

13.3464  Nutation:  The  Nautical  Almanac  The  terms  used  in  The  Nautical  Alma- 
nac from  1901  to  1959  were: 

1901-1902:  The  tabulations  of  long-period  and  short-period  terms  (separately) 
in  both  longitude  and  obliquity  were  based  on  the  values  given  by 


g48  EXPLANATORY  SUPPLEMENT 

Newcomb  (1895a),  as  modified  by  the  Paris  Conference  (1896).  Six 

long-period  terms,  and  seven  short-period,  were  included,  as  shown 

in  Table  13.348.1.  The  precision  was  0"01. 
1903-19H:    The  coefficients  of  a  few  of  the  terms  were  modified  in  accordance 

with  the  revised  values  given  by  Newcomb  (1898d). 
1912-1930:     An  additional  term,  (8),  was  included  in  the  day  numbers  throughout 

this  period,  but  only  in  the  tabulation  of  the  nutation  from  1918. 
1931-1936:    Nutation  in  obliquity  and  the  short-period  nutation  in  longitude  were 

no  longer  tabulated  explicitly,  though  the  former  was  available  as  -B 

(the  day  number).  Nutation  in  right  ascension  (to  0?001),  including 

short-period  terms,  was  tabulated. 
1937-1959:     Tabulations  were  the  same  as  in  former  years,  but  21  terms  (1-4,  6- 

10,  14-25)  were  included.  The  coefficients  used  were  those  given  by 

Newcomb  (1898d)  and  are  quoted  in  Table  13.348.1. 


13.3465  Nutation:  The  American  Ephemeris  The  terms  used  in  The  American 
Ephemeris  from  1901  to  1983  were: 

1901-1911:  The  tabulations  of  long-period  terms  (five-day  intervals)  and  of  short- 
period  terms  (one-day  intervals)  were  based  on  both  the  values  of 
Peters  (1842)  and  those  of  the  Paris  Conference  (1896).  The  terms 
included  were  1-3,  5,  6,  and  8-15.  From  1901  to  1911,  the  argument 
Sun's  true  longitude  was  used  instead  of  Sun's  mean  longitude  (L)  in 
the  Peters  calculation  for  terms  3,  5,  8,  6,  10,  and  11,  and  from  1901  to 
1907  in  the  Paris  calculations  for  terms  8,  10,  and  11.  The  coefficients 
only  differ  in  a  very  few  cases  from  those  shown  in  Table  13.348.1,  and 
the  individual  discrepancies  (usually  of  a  single  unit)  are  not  listed. 

1912-1936:  The  tabulations  were  based  solely  on  the  values  of  the  Paris  Con- 
ference, and  after  1915  were  all  at  an  interval  of  one  day;  the  terms 
included  were  1-4,  6-8,  14,  15,  and  17-21. 

1937-1959:  Tabulation  of  long-period  nutation  in  longitude,  and  short-period  nu- 
tation in  both  longitude  and  obliquity,  were  given  at  intervals  of  one 
day,  and  included  the  terms  1-4,  6-10,  and  14-25.  The  coefficients 
are  those  listed  in  Table  13.348.1. 

1960-1983:  The  formulas  adopted  for  computing  nutation  in  longitude  and  obliq- 
uity were  obtained  by  retaining  all  terms  for  the  coefficients  as  great 
as  0!'0002  from  the  expression  developed  in  Woolard  (1953). 


13.3466    Constants    The  following  constants  were  used  for  the  period  1901-1983. 


13  /  HISTORICAL  INFORMATION 

Solar  parallax 


649 


1901-1968a:  8"80  Paris  (1896,  p.  54). 

1968-1983:  8'.'79405. 

Constant  of  aberration 

1901-1968:  20M7  Paris  (1896,  p.  54). 
1968-1983:  20'.'4958. 


Constant  of  nutation 

1901-1936:    9'.'21  Paris  (1896,  p.  54). 

1937-1983:    9"210  +  0'.'0009  T    Newcomb  (1898d,  p.  241). 

[A.E.  for  the  years  1901-1911  included  tables  for  the  Struve  and  Peters  con- 
stants of  aberration  and  nutation  as  used  formerly,  as  well  as  those  for  the  above 
Paris  values.] 

An  IAU  System  of  Astronomical  Constants  was  adopted  in  1964  and  introduced 
in  the  1968  Astronomical  Ephemeris  and  American  Ephemeris.  The  complete  list 
of  constants  is  given  in  Section  13.35. 


13.347  Ephemeris  for  Physical  Observations  This  section  covers  ephemerides  for 
the  Sun,  Moon,  Mercury,  Venus,  Mars,  Jupiter,  and  Saturn.  In  addition,  semidiam- 
eters  are  given  for  the  years  1901-1983. 


13.3471  Sun  An  ephemeris  for  physical  observations  of  the  Sun  was  first  published 
in  The  Nautical  Almanac  for  the  Year  1907.  Previous  to  that  time,  observations 
were  reduced  with  the  aid  of  tables  privately  printed  by  Warren  de  la  Rue.  (See  the 
volumes  of  the  Greenwich  photo  heliographic  observation.)  The  American  Ephem- 
eris first  included  observations  of  the  Sun  in  1913. 


13.3472  Moon  Ephemeris  for  physical  observations  of  the  Moon,  calculated  by 
Marth,  appeared  in  Monthly  Notices  of  the  Royal  Society  during  the  last  quarter  of 
the  nineteenth  century.  The  ephemeris  was  introduced  intoT7i.e  Nautical  Almanac 
in  1907,  and  was  first  included  in  The  American  Ephemeris  in  1913.  But  the  for- 
mulas and  tables  for  the  calculation  of  the  optical  librations,  and  the  times  of  the 
greatest  librations,  had  been  included  with  the  ephemeris  of  the  elements  of  the 
mean  equator  of  the  Moon,  since  1855. 


650  EXPLANATORY  SUPPLEMENT 

13.3473  Mercury  and  Venus  The  physical  ephemerides  of  Mercury  and  Venus  were 
added  to  The  American  Ephemeris  in  1882,  and  included  in  The  Nautical  Almanac 
in  1907.  Previously,  only  a  small  table  of  the  versed  sine  of  the  illuminated  disk 
divided  by  the  apparent  diameter,  for  Venus  and  for  Mercury,  had  been  given. 

13.3474  Mars  and  Jupiter  Ephemerides  for  physical  observations  of  Mars,  calcu- 
lated by  Marth,  appeared  in  Monthly  Notices  of  the  Royal  Astronomical  Society 
beginning  in  1869,  and  for  Jupiter  beginning  in  1875.  They  were  continued  by 
Crommelin  after  Marth's  death,  and  transferred  to  The  Nautical  Almanac  in  1907. 
They  were  first  included  in  The  American  Ephemeris  in  1913. 

For  1968,  the  ephemeris  for  "Physical  Observations  of  Mars"  was  introduced 
based  on  the  IAU  System  of  Astronomical  Constants. 

13.3475  Saturn  The  physical  ephemeris  of  Saturn  first  appeared  in  the  ephemeris 
in  1960.  The  stellar  magnitude  that  is  included  had  previously  been  given  in  the 
ephemeris  for  the  rings. 

13.3476  Semidiameters  at  unit  distance:  The  Nautical  Almanac  The  values  given  in 
The  Nautical  Almanac  for  the  period  1901-1959  are: 


Sun 

1901-1959:  961'.'18 
1901-1959:  959'.'63 


Auwers  (1891). 

Auwers  (1891,  p.  367);  for  eclipses  only. 


Mercury 

1901-1959:  3'.'34 


Leverrier  (1843). 


I V  it  us 


1901-1920:  8'.'40 
1921-1959:  8'.'41 


Auwers  (1891). 
Auwers  (1894). 


Mars 

1901-1959:  4'.'68 


Hartwig  (1879). 


Jupiter  (equatorial) 


1901-1920:  97"36 
1921-1959:  98*47 


Schur  (1896). 
Sampson  (1910). 


13  /  HISTORICAL  INFORMATION 

Jupiter  (polar) 


651 


1901-1920:  91"10 
1921-1959:  9l!'91 


Schur  (1896). 
Sampson  (1910). 


Saturn  (equatorial) 

1901  1920:  84'.'75 
1921-1959:  83'.'33 


Meyer  (1883). 
Struve  (1898). 


Saturn  (polar) 

1901-1920:  76:88 
1921-1959:  74'.'57 


Meyer  (1883). 
Struve  (1898). 


Uranus 

1901  1930:  34'.'28 
1931-1959:  34'.'28 


Hind. 

Barnard  (1896);  See  (1902);  and  Wirtz  (1912). 


Neptune 

1901-1959:  36"56 


Barnard  (1902). 


13.3477  Semidiameters  at  unit  distance:  The  American  Ephemeris  The  values  given 
in  The  American  Ephemeris  for  the  period  1901-1959  are: 


Sun 


1901  1902 
1903  1959 
1901-1959 


960'.'78       Auwers  (1891);  includes  1'.'15  for  irradiation. 
96l!'50       Harkness  (1899);  includes  l!'15  for  irradiation. 
959'.'63        Auwers  (1891);  for  eclipses  only. 


Mercury 

1901-1959:    3"  3  I 


Leverrier  (1843). 


Venus 


1901-1919:  8:'5S 
1920-1959:  8M1 


Peirce. 

Auwers  (1894). 


652 

Mars 

1901-1919:  5705 

1920-1959:  4"68 

Jupiter  (equatorial) 


EXPLANATORY  SUPPLEMENT 


1901-1919: 
1920-1959: 


100724 
98'.'47 


Peirce. 

Hartwig  (1879). 


Sampson  (1910). 
Sampson  (1910), 


Jupiter  (polar) 


1901-1919: 
1920-1959: 


94'.' 12 
91791 


Peirce. 

Sampson  (1910). 


Saturn  (equatorial) 

1901-1911:  83:'60 
1912-1919:  84788 
1920-1959:  83733 


Barnard  (1902). 
Barnard  (1902). 
Struve  (1898). 


Saturn  (polar) 


1901-1919 
1912-1919 
1920  1959 

Uranus 


78"16 
77747 
74757 


1901-1919:  33"52 

1920-1959:  34728 

Neptune 

1901-1919:  38"66 

1920-1959  :  36756 


Peirce. 

Barnard  (1902). 
Struve  (1898). 


Peirce. 

Barnard  (1896);  See  (1902);  Wirtz  (1912) 


Barnard  (1902). 
Barnard  (1902). 


13.3478  Semidiameters  at  unit  distance  (1960-1983)  From  1960  to  1983  the  follow- 
ing constants  were  used: 


Mercury 


3734  Leverrier  (1843). 


13  /  HISTORICAL  INFORMATION 

Venus 


653 


Mars 


8741  Auwers  (1894). 


4768  Hartwig  (1879). 


Jupiter  (equatorial) 

98"47         Sampson  (1910). 


Jupiter  (polar) 

91791 

Saturn  (equatorial) 
83733 

Saturn  (polar) 

74757 

Uranus 


Sampson(1910). 


Struve  (1898). 


Struve  (1898). 


Neptune 


34728         Bernard  (1896);  See  (1902);  and  Wirtz  (1912). 


36756         Bernard  (1902). 


13.348  Coefficients  of  Nutation  (1834-1959)  Table  13.348.1  gives  the  values 
adopted,  beginning  with  each  year  shown,  of  the  coefficient  of  sine  (Argument) 
in  the  nutation  in  longitude  (A^),  and  of  cosine  (Argument)  in  the  nutation  in 
obliquity  (Ae).  A  blank  indicates  that  the  term  was  not  included  in  the  tabulations 
for  that  year.  A  leader  (...)  indicates  that  the  coefficient  used  was  the  same  as  in 
the  preceding  entry.  The  subheading  "Ae"  is  omitted  for  those  terms  that  do  not 
occur  in  the  obliquity.  Terms  numbered  1  to  13  all  have  periods  greater  than  100 
days,  and  are  known  as  long-period  terms;  terms  14  to  25  have  periods  shorter  than 
35  days,  and  are  known  as  short-period  terms. 


Table  13.348.1 

Adopted  Values  for  Coefficients  of  Nutation 


*-  CM 


<  5 


<  ; 


«  cm  < 


<  i 


<  S 


<  ; 


i  | 


o  m 

O  00 

03  00 

O  O 

d  d 

+  + 


CO 
03 

o 

d 
+ 


1" 
IV 
o 
cm 


o  o 

CM  CM 


S 

o 

CO 

m 

** 

in 

id 

m 

in 

Si 

d 

O 

■  d 

o 

T 

+ 

:  + 

+ 

o 

m 

Is 

a 

CM 

in 

CD 

m 

K 

CM 

CM 

CM 

CM 

CM 

T 

T 

:  7 

T 

CO 

to 

o 

0> 

o 

ft 

CO 

o> 

o 

o 

o 

o 

I 

d 
1 

.  d 

:  1 

cm 

CO 

OD 

CO 

CJ5 

o 

o 

O 

cm 

CM 

CM 

d 

d 

■  d 

t 

+ 

:  + 

o 

CO 

m 

o 

CO 

o 

o 

o 

in 

CM 

o 

CM 

CM 

CM 

CM 

o 

oS 

■  ai 

OS 

d 

+ 

+ 

:  + 

+ 

+ 

CO  c\t 
en  ir> 

CM  CM 


1  I 


<0  to 

co  co  co  Fv 

CM  CM  CM  i- 
.  o 

|v  N  S 
7  7  T  I 


SS  CD  i-  CO  r-.  |v 
m  cj>  o  o  co  co 
co  co  co  o)  cn  o  o> 


C8 

CO    I  ^ 

-J 

CM 


^  +  < 


<l  i 


<  ; 


-1  . 


^  -I  < 


z  I 


CM 

O 

CO 

•* 

CO 

CM 

■  in 

0 

CO 

|v 

-a- 

<  a 


iv 

CD 
O 

o 
d 
I 


in 

CM 


o 
O 


CM 
5 

d 
+ 


CO 

o 
o 

d 
+ 


+ 


|v 

CM  T- 

O  CM 

O  O 


CM 
CM 
O 


CO 

in 

an 

o 

o 

a 

m 

o 

o 

o 

d 

o 

d 

I  I  I 


CO 

rv 


O 
+ 


O  lv 


CD 

CM 


O 

+ 


CO  |v   i-  CO  CM  CO 

CD  CJ>  O  O 

00  00  O         Ol  05 


Table  13.348.1,  continued 

Adopted  Values  for  Coefficients  of  Nutation 


656 

1 3.35   System  of  Constants  (1 968-1 983) 


EXPLANATORY  SUPPLEMENT 


13.351  System  of  Astronomical  Constants  This  system  of  constants  was  replaced 
for  the  1984  edition  of  the  Astronomical  Almanac  by  the  IAU  (1976)  System  of 
Astronomical  Constants  given  on  pages  K6  to  K7  in  the  Astronomical  Almanac 
and  in  Table  16.2. 


Defining  constants 

Number  of  ephemeris  seconds  in  one 

tropical  year  (1990) 
Gaussian  gravitational  constant 

Primary  constants 
Astronomical  unit 
Velocity  of  light 
Equatorial  radius  of  the  Earth 
Dynamical  form-factor  for  Earth 
Geocentric  gravitational  constant 
Mass  ratio:  Earth/Moon 
General  precession  in  longitude  per 

tropical  century  (1900) 
Constant  of  nutation 

Derived  constants 
Solar  parallax 
Light-time  for  unit  distance 
Constant  of  aberration 
Flattening  factor  for  Earth 
Heliocentric  gravitational  constant 
Mass  ratio:  Sun/Earth 
Mass  ratio:  Sun/(Earth  +  Moon) 
Mean  distance  of  the  Moon 
Constant  of  sine  parallax  for  Moon 

Figure  of  the  Earth 

Equatorial  radius  (primary) 

Polar  radius 

Square  of  eccentricity 

Reduction  from  geodetic  latitude  0 

to  geocentric  latitude  0' 
Radius  vector 


31556925.9747 

0.017202098950000 
=  3548'.' 1876069651 

149600  x  106  m 
299792.  5  x  103  m/sec 
6378160  m 
0.0010827 

398.603  x  109m3s-2 

81.30 

5025!'C4 

9!210 


8"794 
499s012 
20"496 
1/298.25 
132718  x  1015 
332958 
328912 

384400  x  103m 
3422'.'451 


3  —2 

nr  s 


6378160  m 

a(l  -/)  =  6356774. 7  m 
0.00669454 

0'-0  =  -ll'32:'743Osin20 

+  1 1633  sin  40  -  0'.'0026  sin  60 
p  a  a(0. 998327073 

+  0.001676438  cos  20 

-0. 0000035 19  cos  40 

+  0.000000008  cos  60) 


13  /  HISTORICAL  INFORMATION  „„ 

bo/ 

Figure  of  the  Earth,  continued 
One  degree  of  latitude  (m)  1 1 133. 35  -  559. 84cos 20 

+  1.17  cos  40 
(0  =  mid-latitude  of  arc) 
One  degree  of  longitude  (m)  1 1413. 28  cos  0  -  93. 51  cos  30 

+  0. 12cos50 

The  complete  system  of  astronomical  constants  is  given  in  Supplement  to  the 
American  Ephemeris  1968  (pp.  4s-7s). 

13.352  Old  Constants  The  printed  ephemeris  of  the  Sun  and  inner  planets  are 
based  on  the  following  values  of  the  constants  that  were  in  use  prior  to  the  intro- 
duction of  the  IAU  (1964)  System. 

Velocity  of  light  299860  x  1 03  m/sec 

Equatorial  radius  of  the  Earth  6378388m 

Constant  of  aberration  20'.'47 

Flattening  factor  of  the  Earth  1/297 

Polar  radius  of  the  Earth  a(  \  —  /)  =  635691 1. 946  m 

Solar  parallax  8'.'80 

Light-time  for  unit  distance  498'.'38 

Constant  of  aberration  20'.'47 

Mass  ratio: 

Sun/(Earth+Moon)  329390 

Earth/Moon  (planetary  theory)  81.45 


13.4  REFERENCES 

Adams,  J.C.  (1849).  "On  an  Important  Error  in  Bouvard's  Tables  of  Saturn"  Mem.  R.A.S. 
17,  1-2. 

Adams,  J.C.  (1853).  "On  New  Tables  of  the  Moon's  Parallax"  Nautical  Almanac  for  1856 
Appendix,  35-43. 

Adams,  J.C.  (1853a).  "On  the  Corrections  to  be  Applied  to  Burckhardt's  and  Plana's 
Parallax  of  the  Moon,  Expressed  in  Terms  of  the  Mean  Arguments"  M.N. R.A.S.  13, 
262-266. 

Adams,  J.C.  (1877).  "Continuation  of  Tables  I  and  III  of  Damoiseau's  Tables  of  Jupiter 

Satellites"  Nautical  Almanac  for  1881  Appendix,  15-23. 
Airy,  G.B.  (1832).  "On  an  Inequality  of  Long  Period  in  the  Motions  of  the  Earth  and 

Venus"  Phil.  Trans.  Roy.  Soc.  67-124. 
Airy,  G.B.  (1835).  "On  the  Calculation  of  the  Perturbations  of  the  Small  Planets  and  the 

Comets  of  Short  Period"  Nautical  Almanac  for  1837  Appendix,  149-171. 
Airy,  G.B.  (1845).  Reduction  of  the  Observations  of  the  Planets  (1750-1830)  London. 

Printed  by  Palmer  and  Clayton,  and  sold  by  J.  Murray. 


ggg  EXPLANATORY  SUPPLEMENT 

Airy,  G.B.  (1848).  Reduction  of  the  Observations  of  the  Moon  (1750-1830)  2  volumes 

London.  Printed  by  Palmer  and  Clayton,  and  sold  by  J.  Murray. 
Airy,  G.B.  (1849).  "Corrections  of  the  Elements  of  the  Moon's  Orbit,  Divided  from  the 

Lunar  Observations  Made  at  the  Royal  Observatory  of  Greenwich,  from  1750  to  1830" 

Mem.  R.A.S.  17,  21-57. 
Airy,  G.B.  (1855).  Observations  Made  at  the  Royal  Observatory,  Greenwich,  in  the  Year 

1853  (Her  Majesty's  Stationary  Office,  London). 
Aksnes,  K.  (1978).  "The  motion  of  Jupiter  XIII  (Leda),  1974-2000"  Astron.  J.  83,  1249- 

1256. 

Andoyer,  H.  (1915).  "Sur  le  Calcul  des  Ephemerides  des  Quatres  Anciens  Satellites  de 

Jupiter"  Bull  Astr.  32,  177-224. 
Auwers,  A.  (1891).  "Der  Sonnendurchmesser  und  der  Venusdurchmesser  nach  den  Beobach- 

tungen  an  den  Heliometern  der  Deutschen  Venus-Expeditionen"  Ast.  Nach.  128,  361- 

376. 

Auwers,  A.  (1894).  "Bemerkung  zu  den  Mittheilungen  von  Resultaten  der  Deutschen 
Venus-Expeditionen  in  Nr.  3066  und  3068  der  A.N."  Ast.  Nach.  134,  359-362. 

Baily,  F.  (1825).  "On  the  Construction  and  Use  of  Some  New  Tables  for  Determining  the 
Apparent  Places  of  Nearly  3000  Principal  Fixed  Stars"  Mem  R.A.S.  2,  Appendix, 
i-ccxxviii. 

Bessel,  F.W.  (1828).  "Uber  den  Gegenwartigen  Zustand  Unserer  Kenntniss  der  Sonnen- 
bewegung  und  die  Mittel  zu  Hirer  Verbesserung"  Ast.  Nach.  6,  261-276  and  293-302. 
Bessel,  F.W.  (1830a).  Tabulae  Regiomontanae  Konigsberg. 

Bessel,  F.W.  (1830b).  "Vorlaufige  Nachricht  von  Einem  auf  er  Kouigsberger  Sternwarte 

Befindlichen  Grossen  Heliometer"  Ast.  Nach.  8,  397-426. 
Bessel,  F.W.  (1875a).  "Untersuchungen  liber  den  Planeten  Saturn,  Seinen  Ring  und  Seinen 

Vierten  Trabanten"  Abhandlungenl,  150-159. 
Bessel,  F.W.  (1875c).  "Ueber  die  Neigung  der  Ebene  des  Saturnsringes"  Abhandlungen  I, 

319-321. 

van  Biesbroeck,  G.  (1957).  "The  mass  of  Neptune  from  a  New  Orbit  of  its  Second  Satellite 

Nereid"  Astron.  J.  62,  272-274. 
Bobone,  J.  (1937a).  "Tables  del  VI  (sexto)  Satellite  de  Jupiter"  Ast.  Nach.  262,  321-346. 
Bobone,  J.  (1937b).  "Tables  del  VII  (septimo)  Satellite  de  Jupiter"  Ast.  Nach.  263,  401- 

412. 

Bouvard,  A.  (1821).  Tables  Astronomiques,  ...Contenant  les  Tables  de  Jupiter,  de  Saturne 

et  d'Uranus  (Bachelier  et  Huzard,  Paris). 
Bower,  E.C.  (1931).  "On  the  Orbit  and  Mass  of  Pluto  with  an  Ephemeris  for  1931-1932" 

Lick  Obs.  Bull.  15,  171-178. 
Breen,  H.  (1848).  "Corrections  of  Lindenau's  Elements  of  the  Orbit  of  Venus  Deduced  from 

the  Greenwich  Planetary  Observations,  from  1750-1830"  Mem.  R.A.S.  18,  95-154. 
Breen,  H.  (1851).  "On  the  Corrections  of  Lindenau's  Elements  of  Mars"  Mem.  R.A.S.  20, 

137-168. 

Brown,  E.W.  (1919).  Tables  of  the  Motion  of  the  Moon  (Yale  University  Press,  New  Haven). 
Burckhardt,  J.C.  (1812).  Tables  de  la  Lune  in  Tables  Astronomiques  publiees  par  le  Bureau 

des  Longitudes  de  France  (Mme.  Ve  Courcier,  Paris). 
Burg,  J.T.  (1806).  Tables  de  la  Lune  in  Tables  Astronomiques  publiees  par  le  Bureau  des 

Longitudes  de  France  (Mme.  Ve  Courcier,  Paris). 
Carlini,  F.  (1810).  Exposizione  di  un  nuovo  metodo  di  construire  le  Tavole  Astronomiche 

in  Applicato  alle  Tavole  de  Sole  (Reale  Stamperia,  Milan). 


13  /  HISTORICAL  INFORMATION  559 

Carlini,  F.  (1832).  "Nuove  Tavole  de'  Moti  Apparenti  del  Sole"  Effemeridi...di  Milano  per 

VAnno  1833  Appendix,  1-104. 
Christy,  J.W.  and  Harrington,  R.J.  (1978).  "The  Satellite  of  Pluto"  Astron.  J.  83,  1005- 

1008. 

Clemence,  G.M.  (1954).  "Perturbations  of  the  Five  Outer  Planets  by  the  Four  Inner  Ones" 

Astron  Papers  for  the  American  Ephemeris  XIH,  V 
Cohn,  F.  (1897).  "Bestimmung  der  Bahnelemente  des  V.  Jupiters  Mondes"  Ast  Nach 

142,  289-338. 

Comrie,  L.J.  (1926).  "The  Use  of  a  Standard  Equinox  in  Astronomy"  M.N.R.A.S  86 
618-631. 

Comrie,  L.J.  (1934).  "Phenomena  of  Saturn's  Satellites"  Mem.  B.A.A.  30,  97-106. 
Crawford,  R.T.  (1938).  "The  Tenth  and  Eleventh  Satellites  of  Jupiter"  P.A.S.P.  50  344- 
347. 

de  Damoiseau,  M.C.T.  (1824).  Tables  de  la  Lune  formees  par  la  seule  theorie  de  Vattraction 
(Bachelier,  Paris). 

de  Damoiseau,  M.C.T.  (1836).  Tables  ecliptiques  des  satellites  de  Jupiter  (Bachelier,  Paris). 
Delambre,  J.B.J.  (1806).  Tables  du  Soleil  (Bachelier,  Paris). 

Delambre,  J.B.J.  (1817).  Tables  ecliptiques  des  satellites  de  Jupiter  (Bachelier,  Paris). 
Downing,  A.M.W.  (1890).  "Corrections  to  the  Elements  of  the  Orbit  of  Juno"  M.N.R.A.S. 
50,  487-497. 

Duncombe,  R.L.  (1969).  "Heliocentric  Coordinates  of  Ceres,  Pallas,  Juno,  Vesta  1928- 

2000"  Astronomical  Papers  for  the  American  Ephemeris  XX,  II. 
Dunham,  D.W.  (1971).  "The  Motions  of  the  Satellites  of  Uranus"  Dissertation.  (Yale 

University,  New  Haven,  CT). 
Eckert,  W.J.,  Brouwer,  D.,  and  Clemence,  G.M.  (1951).  "Coordinates  of  the  Five  Outer 

Planets"  Astronomical  Papers  for  the  American  Ephemeris  XII. 
Eichelberger,  W.S.  (1892).  "The  Orbit  of  Hyperion"  Astron.  J.  II,  145  157. 
Eichelberger,  W.S.  and  Newton,  A.  (1926).  "The  Orbit  of  Neptune's  Satellite  and  the 

Pole  of  Neptune's  Equator"  Astronomical  Papers  for  the  American  Ephemeris  IV, 

275-337. 

Elliot,  J.L.,  French,  R.G.,  Frogel,  J. A.,  Elias,  J.H.,  Mink,  D.J.,  and  Liller,  W.  (1981). 

"Orbits  of  Nine  Uranian  Rings"  Astron.  J.  86,  444-455. 
Encke,  J.F.  (1824).  Der  Venusdurchgang  von  1769  (Becker,  Gotha). 

Encke,  J.F.  (1852a).  "Uber  eine  Neue  Methode  der  Berechnung  der  Planetenstorungen" 

Astr.  Nach.  33,  377-398. 
Encke,  J.F.  (1852b).  "Zusatz  zu  dem  Aufsatze:  Neue  Methode  zur  Berechnung  der  Speciellen 

Storungen  in  Nr.  791  und  792  der  Astron.  Nachrichten"  Ast.  Nach.  34,  349-360. 
Farley,  R.  (1856a).  "Correction  of  the  Elements  of  Pallas"  Nautical  Almanac  for  1860 

570-572. 

Farley,  R.  (1856b).  "Correction  of  the  Elements  of  Vesta"  Nautical  Almanac  for  1860 
573-575. 

Farely,  R.  (1856c).  "Elements  of  Astraea"  Nautical  Almanac  for  1860  576. 
Godeard,  W.  (1878).  "On  the  Correction  of  the  Elements  of  Ceres"  M.N.R.A.S.  38,  119- 
122. 

Grosch,  H.R.J.  (1948).  "The  Orbit  of  the  Eight  Satellites  of  Jupiter"  Astron.  J.  53,  180- 
187. 

Hall,  A.  (1878).  "Observations  and  Orbits  of  the  Satellites  of  Mars"  Washington  Obser- 
vations for  1875  Appendix,  1-46. 


660 


EXPLANATORY  SUPPLEMENT 


Hall,  A.  (1885).  "The  Orbit  of  Iapetus,  the  Outer  Satellite  of  Saturn"  Washington  Obser- 
vations for  1882  Appendix  I,  1-82. 

Hall,  A.  (1886).  "The  Six  Inner  Satellites  of  Saturn"  Washington  Observations  for  1883 
Appendix  I,  1-74. 

Hall,  A.  (1898).  "The  Orbit  of  the  Satellite  of  Neptune"  Astron.  J.  19,  65-66. 
Halley,  E.  (1749).  Tabulae  Astronomicae,  accedunt  de  usu  tabularum  praecepta  (Gulielmum 
Innys,  London). 

Hansen,  P.A.  (1847).  "Aufzug  aus  Einem  Briefe  des  Herrn  Professors  Hansen  an  den 
Herausgeber"  Ast.  Nach.  25,  325  332. 

Hansen,  P.A.  (1857).  Tables  de  la  Lune  construites  d'apress  le  principe  newtonien  de  la 
gravitation  universelle  (G.E.  Eyre  et  G.  Spottiswoode,  London). 

Hansen,  P.A.  and  Olufsen,  C.F.R.  (1853).  Tables  du  Soleil  (B.  Luno,  Copenhagen). 

Harkness,  W.  (1899).  [The  following  is  taken  from  the  preface  to  The  American  Ephem- 
eris  for  1903:  "on  a  recent  investigation  by  my  self,  which  rests  upon  35,  842  merid- 
ian observations  made  at  Greenwich,  Paris,  Washington,  Konigsberg,  Madras,  Milan, 
Dorpat,  Modena,  and  Seeberg."] 

Harrington,  R.J.  and  Christy,  J.W.  (1981).  "The  Satellite  of  Pluto  III"  Astron.  J.  86, 
442-443. 

Harris,  D.L.  [Recent  (unpublished)  work  on  the  satellites  of  Uranus  quoted  by  Kuiper 
(1956,  p.  1632).] 

Harshman,  W.S.  (1894).  "The  Orbit  of  Deimos"  Astron.  J.  14,  145-148.  [Harshman's 
elements  of  Phobos  "(communicated  by  Prof.  Harkness)"  are  attached  (in  manuscript) 
to  a  copy  of  the  above  paper.  It  is  believed  that  they  were  never  published.  See  also 
Publ.  U.S.N.O.,  6,  Appendix  I,  B21  (1911).] 

Herget,  P  (1938).  "Jupiter  XI"  H.A.C.  463. 

Herget,  P.,  Clemence,  G.M.,  and  Hertz,  H.G.  (1950).  "Rectangular  Coordinates  of  Ceres, 
Pallas,  Juno,  Vesta,  1920-1960"  Astronomical  Papers  for  the  American  Ephemeris  II, 
521-587. 

Herget,  P.  (1966).  "Rectangular  Coordinates  of  Ceres,  Pallas,  Juno  Vesta  1960-1980" 

Astronomical  Papers  for  the  American  Ephemeris  XVI. 
Herget,  P.  (1968).  "Outer  Satellites  of  Jupiter"  Astron.  J.  73,  737-742. 
H.M.  Nautical  Almanac  Office  (1933).  Planetary  Co-ordinates  for  the  Years  1800-1940 

Referred  to  the  Equinox  of  1950.0  London. 
H.M.  Nautical  Almanac  Office  (1939).  Planetary  Co-ordinates  for  the  Years  1940-1960 

Referred  to  the  Equinox  of  1950.0  London. 
Herrick,  S.  (1952).  "Jupiter  IXX  and  Jupiter  XII"  P.A.S.P.  64,  237-241. 
Hill,  G.W.  (1890).  "A  new  theory  of  Jupiter  and  Saturn"  Astronomical  Papers  for  the 

American  Ephemeris  IV,  1-577. 
Hill,  G.W.  (1895a).  "Tables  of  Jupiter  Constructed  in  Accordance  with  the  Methods  of 

Hansen"  Astronomical  Papers  for  the  American  Ephemeris  VII,  1-144. 
Hill,  G.W.  (1895b).  "Tables  of  Saturn  Constructed  in  Accordance  with  the  Methods  of 

Hansen"  A.P.A.E.  7,  145-285. 
Hind,  J.R.  (1855).  "Revised  Elements  of  Juno"  Nautical  Almanac  for  1859  562-564. 
International  Astronomical  Union  (1950).  Trans.  IAU7,  65  and  83. 

Kendall,  E.O.  (1877).  [An  extension  for  the  year  1880  of  Damoiseau's  tables  of  the  satellites 

of  Jupiter  (probably  never  published).] 
Kowalski,  M.  (1855).  Recherches  sur  les  mouvements  de  Neptune  Kasan 
Kuiper,  G.P.  (1949).  "The  Fifth  Satellite  of  Uranus"  P.A.S.P.  61,  129. 


13  /  HISTORICAL  INFORMATION  gg^ 

Kuiper,  G.P.  (1956).  "On  the  Origin  of  the  Satellites  and  the  Trojans"  Vistas  in  Astronomy 
2,  1631-1666.  y 
de  Lalande,  J.J.  (1771).  Astronomie  2nd  ed.  (Desaint,  Paris), 
de  Lalande,  J.J.  (1792).  Astronomie  3rd  ed.  (Desaint,  Paris). 

de  Laplace,  PS.  (1787).  "Sur  les  Inegalitie  Seculares  des  Planets"  Memoires  de  I'Academie 

des  Sciences  de  Paris  1784,  pp.  1-50. 
de  Laplace,  P.S.  (1788).  "Theorie  de  Jupiter  et  de  Saturne"  Memoires  de  I'Academie  des 

Sciences  de  Paris  1785,  pp.  33-160. 
Leveau,  G.  (1896).  "Tables  du  Mouvement  de  Vesta,  Fondees  sur  la  Comparison  de  la 

Theorie  avec  les  Observations"  Ann.  de  I'Obs.  de  Paris  22,  A.1-A.317. 
Leverrier,  U.J.J.  (1845).  "Theorie  du  Movement  de  Mercure"  Connaissance  des  Temps  for 

1848  Additions,  1-165. 
Leverrier,  U.J.J.  (1846).  "Researches  sur  les  Mouvements  de  la  Planete  Herschel  (dite 

Uranus)"  Connaissane  des  Temps  for  1849  Additions,  1-254. 
Leverrier,  U.J.J.  (1858).  "Theorie  et  Tables  du  Mouvement  Apparent  du  Soleil"  Ann.  de 

I'Obs.  de  Paris  4,  1-263  and  1-121. 
Leverrier,  U.J.J.  (1859).  "Theorie  et  Tables  du  Movement  de  Mercure"  Ann.  de  I'Obs.  de 

Paris  5,  1-195. 

Leverrier,  U.J.J.  (1861a).  "Theorie  et  Tables  du  Movement  de  Venus"  Ann.  de  I'Obs.  de 
Paris  6,  1-184. 

Leverrier,  U.J.J.  (1861b).  "Theorie  et  Tables  du  Mouvement  de  Mars"  Ann.  de  I'Obs.  de 
Paris  6,  185-435. 

Leverrier,  U.J.J.  (1876a).  "Tables  de  Jupiter"  Ann.  de  I'Obs.  de  Paris  12,  1-76  and  1-178. 
Leverrier,  U.J.J.  (1876b).  "Tables  de  Saturne"  Ann.  de  I'Obs.  de  Paris  12,  A.1-A.80  and 
A.1-A.286. 

Leverrier,  U.J.J.  (1877a).  "Tables  du  Mouvement.  d'Uranus,  Fondees  sur  la  Comparison 
de  la  Theorie  avec  les  Observations"  Ann.  de  I'Obs.  de  Paris  14,  A.1-A.92  and  A.l- 
A.163. 

Leverrier,  U.J.J.  (1877b).  "Tables  du  Mouvement  de  Neptune,  Fondees  sur  la  Comparison 
de  la  Theorie  avec  les  Observations"  Ann.  de  I'Obs.  de  Paris  14,  1-70  and  1-96. 

Levin,  A.E.  (1931,  1934).  "Mutual  Eclipses  and  Occultations  of  Jupiter's  Satellites"  J.B.A.A. 
42,  6-14  (1931).  Mem.  B.A.A.  30,  149-183  (1934). 

Lindenau,  B.  (1810).  Tabulae  Veneris  novae  et  correctae  (Becker,  Gotha). 

Lindenau,  B.  (1811).  Tabulae  Martis  novae  et  correctae  (Schoeniana,  Eisenberg). 

Lindenau,  B.  (1813).  Investigation  nova  orbitae  a  Mercurio  circa  Solem  descriptae  (Becker, 
Gotha). 

Longstreth,  M.F.  (1853).  "On  the  Accuracy  of  the  Tabular  Longitude  of  the  Moon,  to 
be  Obtained  by  the  Construction  of  New  Lunar  Tables"  Trans.  Amer.  Phil.  Soc.  10, 
225-232. 

Marth,  A.  Marth  published  a  long  series  of  ephemerides  for  physical  observations  of  the 
planets  and  for  observations  of  the  satellites.  The  first  and  last  of  each  series  are  alone 
quoted  here. 

Marth,  A.  (1870-1894).  "Ephemeris  of  the  Satellites  of  Uranus"  M.N.R.A.S.  30,  150-54, 
171. 

Marth,  A.  (1873  1895).  "Ephemeris  of  the  Satellites  of  Saturn"  M.N.R.A.S.  33,  513-55, 
164. 

Marth,  A.  (1878-1891).  "Ephemeris  of  the  Satellite  of  Neptune"  M.N.R.A.S.  38,  475-51, 
563. 


662 


EXPLANATORY  SUPPLEMENT 


Marth,  A.  (1883-1896).  "Data  for  Finding  the  Positions  of  the  Satellites  of  Mars"  M.N.R.A.S. 
44,  29-56,  435. 

Marth,  A.  (1891-1896).  "Ephemeris  for  Computing  the  Positions  of  the  Satellites  of 

Jupiter"  M.N.R.A.S.  51,  505-56,  534. 
Mason,  C.  (1780).  Lunar  Tables  London,  (no  publisher  given  in  book) 
Mason,  C.  (1787).  Mayer's  Lunar  Tables  Improved  London.  Printed  by  William  Richardson 

and  sold  by  P.  Emsly. 

Mayer,  T.  (1770).  Tabulae  Motuum  Solis  et  Lunae  novae  et  correetae;  puibus  accedit 

Methodus  Longitudinum  Promota  (Gulielmiet  Johannis  Richardson,  London). 
Mignard,  F.  (1981).  "The  Mean  Elements  of  Nereid"  Astron.  J.  86,  1728-1729. 
Newcomb,  S.  (1865).  An  Investigation  of  the  Orbit  of  Neptune,  with  General  Tables  of  its 

Motion  (Smithsonian,  Washington,  DC). 
Newcomb,  S.  (1867).  "Investigation  of  the  Distance  of  the  Sun  and  of  the  Elements  Which 

Depend  upon  it"  Washington  Observations  for  1865  Appendix  II,  1-29. 
Newcomb,  S.  (1873).  An  Investigation  of  the  Orbit  of  Uranus,  with  General  Tables  of  its 

Motion  (Smithsonian,  Washington,  DC). 
Newcomb,  S.  (1875).  "The  Uranian  and  Neptunian  Systems"  Washington  Observations 

for  1873  Appendix  I,  1-74. 
Newcomb,  S.  (1878a).  "Researches  on  the  Motion  of  the  Moon"  Washington  Observations 

for  1875  Appendix  II,  1-280. 
Newcomb,  S.  (1878b).  Corrections  to  Hansen's  Tables  of  the  Moon,  Prepared  and  Printed 

for  the  Use  of  the  The  American  Ephemeris  and  Nautical  Almanac  (U.S.  Government 

Printing  Office,  Washington,  DC). 
Newcomb,  S.  (1895a).  "Tables  of  the  Mot  ion  of  the  Earth  on  its  Axis  and  Around  the  Sun" 

Astronomical  Papers  for  the  Ephemeris  VI,  1-169.  [Usually  referred  to  as  Tables  of 

the  Sun.] 

Newcomb,  S.  (1895b).  "Tables  of  the  Heliocentric  Motion  of  Mercury"  Astronomical  Papers 

for  the  American  Ephemeris  VI,  171-270. 
Newcomb,  S.  (1895c).  "Tables  of  the  Heliocentric  Motion  of  Venus"  Astronomical  Papers 

for  the  American  Ephemeris  VI,  271-382. 
Newcomb,  S.  (1895d).  "The  Elements  of  the  Four  Inner  Planets  and  the  Fundamental 

Constants  of  Astronomy"  Supplement  to  the  American  Ephemeris  for  1897  1-202. 
Newcomb,  S.  (1897).  "A  New  Determination  of  the  Precessional  Constant"  Astronomical 

Papers  for  the  American  Ephemeris  VIII,  1-76. 
Newcomb,  S.  (1898a).  "Tables  of  the  Heliocentric  Motion  of  Mars"  Astronomical  Papers 

for  the  American  Ephemeris  VI,  383-586. 
Newcomb,  S.  (1898b).  "Tables  of  the  Heliocentric  Motion  of  Neptune"  Astronomical  Papers 

for  the  American  Ephemeris  VII,  287-416. 
Newcomb,  S.  (1898c).  "Tables  of  the  Heliocentric  Motion  of  Neptune"  Astronomical  Papers 

for  the  American  Ephemeris  VII,  419-471. 
Newcomb,  S.  (I898d).  "Sur  les  Formules  de  Nutation  Bases  sur  les  Decisions  de  la  Con- 
ference de  1896"  Bull.  Astr.  15,  241-246. 
Nicholson,  S.B.  (1944).  "Orbit  of  the  Ninth  Satellite  of  Jupiter"  Ap.  J.  100,  57-62. 
Paris  (1896).  Conference  Internationale  des  Etoiles  Fondamentales:  Process-  Vebaux  Paris. 
Peirce,  B.  (1848a).  "Perturbations  of  Uranus;  Investigations  into  the  Action  of  Neptune 

upon  Uranus"  Proc.  Amer.  Acad.  Sci  (Boston)  1,  144-149  and  332-342. 
Peirce,  B.  (1848b).  "Uber  die  Storungen  des  Neptune's  Ast.  Nach."  27,  215-218. 
Peirce,  B.  (1853).  Tables  of  the  Moon  2nd  ed.  1865,  (Bureau  of  Navigation.  Washington, 

DC). 


13  /  HISTORICAL  INFORMATION 


663 


Peters,  C.A.F.  (1842).  Numerus  Constants  Nutationis  ex  ascensionibus  rectis  stellae  po- 
laris  in  specula  dorpatensi  1822-1838  observatis  deductus;  adjecta  est  disquisitio  the- 
oretica  de  formula  nutationis  St.  Petersburg. 

Plana,  J.B.  (1832).  Theorie  du  mouvement  de  la  Lune  3  volumes,  (Imprimerie  Rovale 
Turin). 

Pottier,  L.  (1896).  "Addition  aux  Tables  Ecliptiques  des  Satellites  de  Jupiter  de  Damoi- 

seau"  Bull.  Astr.  13,  67-79  and  107-112. 
Robertson,  J.  (1924).  "Orbit  of  the  Fifth  Satellite  of  Jupiter"  Ap.  J.  35,  190-193. 
Rose,  L.E.  (1974).  "Orbit  of  Nereid  and  the  Mass  of  Neptune"  Astron.  J.  79,  489-490. 
Ross,  F.E.  (1905).  "Investigations  of  the  Orbit  of  Phoebe"  Harvard  Annals  53,  101-142. 
Ross,  F.E.  (1907a).  "Semi-definitive  Elements  of  Jupiter's  Sixth  satellite"  Lick  Obs  Bull 

4,  110-112. 

Ross,  F.E.  (1907b).  "New  Elements  of  Jupiter's  Seventh  satellite"  Ast.  174,  359-362. 

Ross,  F.E.  (1917).  "New  Elements  of  Mars  and  Tables  for  Correcting  the  Heliocentric  Po- 
sitions Derived  from  Astronomical  Papers,  Volume  VI,  Part  IV"  Astronomical  Papers 
for  the  American  Ephemeris  IX,  251-274. 

Runkle,  J.D.  (1855).  "New  Tables  for  Determining  the  Values  of  the  Coefficients,  in  the 
Perturbative  Function  of  Planetary  Motion,  Which  Depend  upon  the  Ratio  of  the 
Mean  Distances"  Smithsonian  Contribution  to  Knowledge  IX,  Appl  (Smithsonian, 
Washington,  DC). 

Sampson,  R.A.  (1910).  Tables  of  the  Four  Great  Satellites  of  Jupiter  (William  Wesley  & 
Son,  London). 

Schubert.  E.  (1854).  "On  the  Correction  for  the  Elements  of  (1)  Ceres"  Astron.  J.  3, 
153-159  and  162-165. 

Seidelmann,  P.K.  (1979).  "The  Ephemerides;  Past,  Present  and  Future"  Dynamics  of  the 

Solar  System  R.L.  Duncombe,  ed.  pp.  99-114. 
Struve,  F.G.W.  (1844).  "Sur  le  Coefficient  Constant  dans  PAberration  des  Etoiles  Fixes, 

Deduits  des  Observations  Qui  ont  ete  Executees  a  l'Observatoire  de  Pulkova  par 

l'lnstrument  des  Passages  de  Repsold,  Etabli  dans  le  Premier  Verical"  Mem.  de  I 'Acad 

Imp.  Sci.  St.  Petersburg  6th  series,  5,  229-285. 
Struve,  G.  (1924-1933).  Neue  Untersuchungen  im  Saturnsystem.  Veroffentlichungen  der 

Universitatssternwarte  zu:  Berlin- Babelsberg  6,  parts  1,  4,  5. 

Struve,  G.  (1924).  Part  1.  "Die  Bahn  von  Rhea"  1-16. 

Struve,  G.  (1930).  Part  4.  "Die  Systeme  Mimas-Tethys  und  Enceladus-Dione"  1-61. 
Struve,  G.  (1933).  Part  5.  "Die  Beobachtungen  der  ausseren  Trabanten  und  die  Bah- 
nen  von  Titan  und  Japetus"  1-44. 
Struve,  H.  (1888).  "Beobachtungen  der  Saturnstrabanten"  Supplement  1  aux  Observations 
de  Poulkova,  1-132. 

Struve,  H.  (1903).  "Neue  Bestimmung  der  Libration  Mimas-Tethys"  Ast.  Nach.  162,  325- 
344. 

Struve,  H.  (1911).  Uber  die  Lage  der  Marsachse  und  die  Konstanten  im  Mars  System 
Sitzungsberichte  der  Koniglich  Preussischen  Akademie  der  Wissenschaften  fiir  1911 
1056-1083. 

Struve,  H.  (1913).  Bahnen  der  Uranustrabanten.  Abteilung  1:  Oberon  und  Titania.  Ab- 
handlungen  der  Koniglich  Preussischen  Akademie  der  Wissenschaften. 

Taylor,  S.W.  (1951).  "On  the  Shadow  of  Saturn  on  Its  Rings"  Astron.  J.  55,  229-230. 

Todd,  D.P.  (1876).  A  Continuation  of  de  Damoiseau's  Tables  of  the  Satellites  of  Jupiter 
to  the  Year  1900  (Bureau  of  Navigation,  Washington,  DC). 


gg4  EXPLANATORY  SUPPLEMENT 

Vince  S.  (1797-1808).  A  Complete  System  of  Astronomy  3  volumes.  2d  ed.,  1814-1825 

(University  of  Cambridge,  Cambridge). 
Walker,  S.C.  (1848).  Report  of  the  United  States  Coast  and  Geodetic  Survey  for  1848. 
Wargentin,  P.W.  (1746).  "Tabulae  procalculandis  eclipsibus  satellitum  Jovis"  Acta  Soc. 

reg.  sci.  Upsaliensis  ad  annum  17^1.  Stockholm. 
Wilson,  R.H.  (jr.)  (1939).  "Revised  Orbit  and  Ephemeris  for  Jupiter  X"  P.A.S.P.  51, 

241-242. 

Winlock,  J.  (1864).  Tables  of  Mercury,  for  the  Use  of  The  American  Ephemeris  and  Nau- 
tical Almanac  (Bureau  of  Navigation,  Washington,  DC). 

van  Woerkom,  A.J.J.  (1950).  "The  Motion  of  Jupiter's  Fifth  Satellite,  1892-1949"  Astro- 
nomical Papers  for  the  American  Ephemeris  XIII,  1-77. 

Woolard,  E.W.  (1953).  "Theory  of  the  Rotation  of  the  Earth  Around  its  Center  of  Mass" 
Astronomical  Papers  for  the  American  Ephemeris  XV,  pt  1. 

Woolhouse,  W.S.B.  (1833).  "New  Tables  for  Computing  the  Occupations  of  Jupiter's 
Satellites  by  Jupiter,  the  Transits  of  the  Satellites  and  Their  Shadows  over  the  Disc 
of  the  Planet,  and  the  Positions  of  the  Satellites  with  Respect  to  Jupiter  at  any  Time" 
Nautical  Almanac  for  1835  Appendix,  1-39. 

Zadunaisky,  P.E.  (1954).  "A  Determination  of  New  Elements  of  the  Orbit  of  Phoebe, 
Ninth  Satellite  of  Saturn"  Astron.  J.  59,  1-6. 


13  /  HISTORICAL  INFORMATION  ggg 

The  reports  and  recommendations  of  Commission  4  of  the  International  Astronomical 
Union  have  been  published  as  follows: 


Transactions  IAU 

MssenriDiy 

I,  159,  207;  1923. 

Rome 

1922 

II,  18-19,  178,  229;  1926 

VIUUUI  lUgtr,  ILIlglrlllQ 

1925 

III,  18,  224,  300;  1929 

T  iP>if*i  ph 

UC1UCU 

IV,  20,  222,  282;  1933. 

namnrintro     i\T  A 
v   t  i  1 1  M  'I  J,U.gt!,  ivl/l 

1  mi 
19.3  2 

V,  29-33,  281-288,  369-371;  1936 

1  ri-j  - 

VI,  20  25,  336,  355-363;  1939 

OLUvlVllUlJll 

i  mo 

VII,  61,  75-83;  1950 

Z  ii  rich 

iy4o 

VIII,  66-68,  80-102;  1954 

rtooie 

IX,  80-91;  1957 

Dublin 

1955 

X.  72.  85-99;  1960 

iviuacow 

1  nco 

iy5o 

XI   A   1-8"  1962   B    Ifi4-1fi7  441-4R9-  1QR9 

J                  *      *•*)     A.  XS\J  A*  \     It.      XU"X        I'll.      1   1  J         1  I J  ^  ^      1  jUi 

Berkeley 

1961 

XII  A  1-10-  1965  B  101-105  .W^-fi?^  IQfifi 

-nd.muu.rg 

XIII  A.  1-9-  1967  B  47-53  178-182-  1968 

I    1  i  1  !  .  1  H 

lab  i 

XIV,  A,  1-9;  1970,  B,  79-85,  198-199;  1977 

Brighton 

1970 

XV,  A.  1  10;  1973,  B,  69-72;  1974 

Sydney 

1973 

XVI,  Al,  1-7;  1976,  B,  31,  49-67;  1977 

Grenoble 

1976 

XVII,  Al,  1-6;  1979,  B,  63-83;  1980 

Montreal 

1979 

XVIII,  A,  1  13;  1982,  B,  67-72;  1983 

Patras 

1982 

XLX,  A,  1-6;  1985,  B,  93-96;  1986 

New  Delhi 

1985 

XX,  A,  16;  1988,  B,  105-108;  1989 

Baltimore 

1988 

Protocols  of  the  Procedings  of  the  International  Conference  held  at  Washington  for 
the  purpose  of  fixing  a  Meridian  and  a  Universal  Day.  October  1884.  Washington  D.C., 
1884. 

Process- Verbaux  of  the  Conference  Internationale  des  Etoiles  Fondamentales  de  1896. 
Paris,  Bureau  des  Longitudes,  1896. 

Congress  International  des  Ephemerides  Astronomiques  tenu  aTObservatoire  de  Paris 
du  23  au  26  Octobre  1911.  Paris  Bureau  des  Longitudes,  1912.  A  full  account,  with  English 
translations  of  the  resolutions,  is  given  in  M.N.R.A.S.,  72,  342-345,  1912. 

Colloque  International  sur  les  Constantes  Fondamentales  de  l'Astronornie.  Observa- 
toire  de  Paris,  27  Mars-ier  Avril  1950.  Colloques  International^  du  Centre  National  de  la 
Recherche  Scientifique,  25,  1  131,  Paris,  1950.  The  proceedings  and  recommendations  are 
also  available  in  Bull.  Astr.  15,  parts  3-4,  163-292,  1950. 

Proceedings  of  IAU  Colloquim  No.  9  (Heidelburg,  1970)  on  "The  IAU  System  of 
Astronomical  Constants,"  Celestial  Mechanics  4,  no.  2,  128-280,  1971. 

Duncombe,  R.  L.,  Fricke,  W.,  Seidelmann,  P.  K.,  and  Wilkins,  G.  A.  (1977). 

Proceedings  of  the  Sixteenth  General  Assembly,  Grenoble  1976,  p.  56. 


CHAPTER 


Related  Publications 

compiled  by  M.R.  Lukac 


14.1    CURRENT  PUBLICATIONS 

14.1 1    Joint  Publications  of  the  Royal  Greenwich  Observatory  and  the  United 
States  Naval  Observatory 

These  publications  are  available  from  Her  Majesty's  Stationery  Office  and  from  the 
Superintendent  of  Documents,  U.S.  Government  Printing  Office,  Washington,  DC, 
20402. 

In  the  United  States,  the  Sight  Reduction  Tables  may  be  obtained  from  the  De- 
fense Mapping  Agency,  which  includes  the  former  Hydrographic  Department.  The 
Defense  Mapping  Agency's  distribution  center  address  is:  DMA  Combat.  Support 
Services,  Washington,  DC,  20315-0010. 

The  Astronomical  Almanac  contains  the  ephemerides  of  the  Sun,  Moon,  planets 
and  their  natural  satellites,  as  well  as  data  on  eclipses  and  other  astronomical 
phenomena.  It  includes  information  concerning  timescales  and  coordinate  systems; 
data  on  stars  and  stellar  systems,  including  bright  stars,  standards  for  photometry, 
radial  velocity,  and  radio  sources;  and  lists  of  bright  galaxies,  X-ray  sources,  variable 
stars,  quasars,  and  pulsars.  It  also  contains  a  list  of  the  observatories  of  the  world, 
information  concerning  the  calendar,  and  the  Astronomical  System  of  Constants. 

The  Nautical  Almanac  contains  ephemerides  at  an  interval  of  one  hour  and 
auxiliary  astronomical  data  for  marine  navigation. 

The  Air  Almanac  contains  ephemerides  at  an  interval  of  ten  minutes  and  aux- 
iliary astronomical  data  for  air  navigation. 

Astronomical  Phenomena  contains  extracts  from  The  Astronomical  Almanac 
and  is  published  annually  in  advance  of  the  main  volume.  It  contains  the  dates  and 

667 


g68  EXPLANATORY  SUPPLEMENT 

times  of  planetary  and  lunar  phenomena  and  other  astronomical  data  of  general 
interest. 

Planetary  and  Lunar  Coordinates,  1984-2000  provides  low-precision  astronom- 
ical data  for  use  in  advance  of  the  annual  ephemerides  and  for  other  purposes.  It 
contains  heliocentric,  geocentric,  spherical,  and  rectangular  coordinates  of  the  Sun, 
Moon,  and  planets;  eclipse  data;  and  auxiliary  data,  such  as  orbital  elements  and 
precessional  constants. 

Sight  Reduction  Tables  for  Air  Navigation,  (Pub.  No.  249,  reproduced  as  (British) 
Air  Publication,  A. P.  3270).  Volume  1  contains  the  altitude  to  V  and  the  azimuth 
to  1°  for  the  seven  most  suitable  stars  for  navigation,  for  each  degree  of  latitude 
and  for  each  degree  of  local  sidereal  time.  Volumes  2  and  3  give  similar  data  for 
each  degree  of  declination  to  29°  and  for  each  degree  of  hour  angle.  Tabulations 
extend  to  depressions  of  at  least  5°  below  the  horizon. 

Sight  Reduction  Tables  for  Marine  Navigation,  (Pub.  No.  229,  reproduced  as 
(British)  Hydrographic  Department,  N.P.  401,  1971  onward).  These  tables  give  alti- 
tude to  O'.l,  with  variations  for  declination  and  azimuth  to  0?1,  with  arguments  for 
latitude,  hour  angle,  and  declination,  all  at  1°  intervals.  They  provide  all  solutions 
of  the  spherical  triangle,  given  two  sides  and  the  included  angle,  to  find  a  third  side 
and  adjacent  angle. 


14.12   Other  Publications  of  the  United  States  Naval  Observatory 

Almanac  for  Computers  contains  short  mathematical  series  that  are  used  to  repre- 
sent the  positions  of  the  Sun,  Moon,  and  planets  for  efficient  evaluation  with  small 
computers  or  programmable  calculators.  Data  for  both  astronomical  and  naviga- 
tional applications  are  included.  Discontinued. 

Astronomical  Papers  of  The  American  Ephemeris  are  issued  irregularly  and 
contain  reports  of  research  in  celestial  mechanics  with  particular  relevance  to  ephem- 
erides. 

United  States  Naval  Observatory  Circulars  are  issued  irregularly  to  disseminate 
astronomical  data  concerning  ephemerides  or  astronomical  phenomena. 

The  Multi-year  Interactive  Computer  Almanac  (MICA)  is  an  integrated  package 
of  software  and  astronomical  data  on  a  floppy  diskette.  MICA  will  produce  to  full 
precision  most  of  the  data  in  The  Astronomical  Almanac,  including  both  positional 
and  physical  data  interpolated  to  any  date  and  time  within  the  appropriate  year. 
Versions  are  available  for  microcomputers  running  under  MS-DOS  and  Macintosh 
Systems. 

Publications  of  the  United  States  Naval  Observatory,  Second  Series,  are  issued 
irregularly  and  contain  observational  results  or  data  related  to  obtaining  observa- 
tions. 


14  /  RELATED  PUBLICATIONS 

14.13   Other  Publications  of  the  Royal  Greenwich  Observatory 


669 


The  Star  Almanac  for  Land  Surveyors  contains  tabulations  of  R,  declination  and 
E  for  the  Sun  for  every  6  hours,  and  right  ascension  to  0?1  and  declination  of  'l"  of 
all  stars  brighter  than  magnitude  4.0  for  each  month.  In  addition,  the  ephemerides 
of  R,  declination,  and  E  for  the  Sun  are  represented  by  polynomial  series  for  each 
month.  This  volume  is  available  from  Her  Majesty's  Stationery  Office  and  from 
Bernan  Associates,  9730  E.  George  Palmer  Highway,  Lanham,  MD,  20706. 

Compact  Data  for  Navigation  and  Astronomy  for  1986  to  1990  contains  data 
which  are  mainly  in  the  form  of  polynomial  coefficients,  for  use  by  navigators  and 
astronomers  to  calculate  the  positions  of  the  Sun,  Moon,  navigational  planets,  and 
bright  stars  using  a  small  programmable  calculator  or  personal  computer. 

Interpolation  and  Allied  Tables  contains  tables,  formulas,  and  explanatory  notes 
on  the  techniques  for  numerical  interpolation,  differentiation,  and  integration.  In 
particular,  it  contains  extensive  tables  of  Bessel  and  Everett  interpolation  coeffi- 
cients. This  booklet  is  available  from  Her  Majesty's  Stationery  Office  and  Bernan 
Associates,  9730  E.  George  Palmer  Highway,  Lanham,  MD,  20706.  The  companion 
booklet  Subtabulation  contains  tables  of  Lagrange  interpolation  coefficients  at  in- 
tervals of  1/20  and  1/24,  as  well  as  details  for  two  other  techniques  of  systematic 
interpolation. 

Royal  Observatory  Bulletins  (21-181)  and  Royal  Greenwich  Observatory  Bul- 
letins (1-20  and  from  182)  are  issued  regularly  and  contain  details  of  current  astro- 
nomical research.  These  publications  may  be  obtained,  subject  to  availability,  from 
the  Royal  Greenwich  Observatory,  Madingly  Road,  Cambridge  CB3  0EZ. 

Selected  NAO  Technical  Notes  of  the  Royal  Greenwich  Observatory  are  issued 
irregularly  to  disseminate  technical  information  concerning  astronomical  phenom- 
ena, ephemerides,  and  navigation. 

Greenwich  Observations  is  a  complete  list  of  the  appendices  and  special  in- 
vestigations included  in  the  annual  volumes  of  observations  made  at  the  Royal 
Observatory,  Greenwich.  A  list  of  the  separate  publications  of  the  Observatory  are 
given  in  the  volume  for  1946. 

Royal  Observatory  Annals  This  series  of  publications  includes:  Number  1,  "Nu- 
tation 1900-1959,"  1961;  values  based  on  E.W.  Woolard's  series. 

Annals  of  Cape  Observatory  This  series  includes  papers  and  observational  data 
that  are  of  relevance  to  the  ephemerides. 

14.14    Publications  of  Other  Countries 

Apparent  Places  of  Fundamental  Stars  is  prepared  annually  by  the  Astronomis- 
ches  Rechen-Institut  in  Heidelberg  and  contains  mean  and  apparent  coordinates  of 
1535  stars  of  theFifth  Fundamental  Catalogue  (FK5).  This  volume  is  available  from 
Verlag  G.  Braun,  Karl-Friedrich-Strasse,  14-18,  Karlsruhe,  Germany. 


qjq  EXPLANATORY  SUPPLEMENT 

Ephemerides  of  Minor  Planets  is  prepared  annually  by  the  Institute  of  The- 
oretical Astronomy,  and  published  by  the  Academy  of  Sciences  of  the  U.S.S.R. 
Included  in  this  volume  are  elements,  opposition  dates,  and  opposition  ephemer- 
ides of  all  numbered  minor  planets.  This  volume  is  available  from  the  Institute  for 
Theoretical  Astronomy,  10  Kutuzov  Quay,  191187  St.  Petersburg. 


14.2   ASTRONOMICAL  PAPERS  PREPARED  FOR  THE  USE  OF  THE 
AMERICAN  EPHEMERIS  AND  NAUTICAL  ALMANAC 

Astronomical  Papers  of  The  American  Ephemeris  are  available  from  the  U.S.  Naval 
Observatory,  Washington,  DC,  20392.  Volumes  I  through  X  are  out  of  print  and  no 
longer  available. 

Introduced  in  1882,  the  series  is  published  irregularly  and  contains  reports  of 
research  in  celestial  mechanics  with  particular  relevance  to  ephemerides.  A  full  list 
of  the  papers  published  to  date  follows: 

Volume  I 

I.  Newcomb,  Simon  "On  the  Recurrence  of  Solar  Eclipses  with  Tables  of  Eclipses 

from  B.C.  700  to  A.D.  2300"  1879. 

II.  Newcomb,  Simon,  assisted  by  John  Meier  "A  Transformation  of  Hansen's 

Lunar  Theory  Compared  with  the  Theory  of  Delaunay"  1880. 

III.  Michelson,  Albert  A.  "Experimental  Determination  of  the  Velocity  of  Light 
Made  at  the  U.S.  Naval  Academy,  Annapolis"  1880. 

IV.  Newcomb,  Simon  "Catalogue  of  1098  Standard  Clock  and  Zodiacal  Stars" 
1882. 

V.  Hill,  George  W.  "On  Gauss's  Method  of  Computing  Secular  Perturbations, 

with  an  Application  to  the  Action  of  Venus  on  Mercury"  1881. 

VI.  Newcomb,  Simon  "Discussion  and  Results  of  Observations  on  Transits  of 
Mercury,  from  1677  to  1881"  1882. 

Volume  II 

I.  Newcomb,  Simon,  assisted  by  John  Meier  "Formulae  and  Tables  for  Express- 

ing Corrections  to  the  Geocentric  Place  of  a  Planet  in  Terms  of  Symbolic 
Corrections  to  the  Elements  of  the  Orbits  of  the  Earth  and  Planet"  1883. 

II.  Safford,  Truman  Henry  "Investigation  of  Corrections  to  the  Greenwich  Plan- 

etary Observations  from  1762  to  1830"  1883. 


14  /  RELATED  PUBLICATIONS 


671 


III.  Newcomb,  Simon  "Measures  of  the  Velocity  of  Light  Made  under  Direction 
of  the  Secretary  of  the  Navy  During  the  Years  1880-1882"  1885. 

IV.  Michelson.  Albert  A.  "Supplementary  Measures  of  the  Velocities  of  White 
and  Colored  Light  in  Air,  Water,  and  Carbon  Disulphide,  Made  with  the 
Aid  of  the  Bache  Fund  of  the  National  Academy  of  Sciences"  1885. 

V.  Newcomb,  Simon  "Discussion  of  Observations  of  the  Transits  of  Venus  in 

1761  and  1769"  1890. 

VI.  Newcomb,  Simon  "Discussion  of  the  North  Polar  Distances  Observed  with 
the  Greenwich  and  Washington  Transit  Circles  with  Determinations  of  the 
Constant  of  Nutation"  1891. 

Volume  III 

I.  Newcomb,  Simon  "Development  of  the  Perturbative  Function  and  its  Deriva- 

tives, in  Sines  and  Cosines  of  Multiples  of  the  Eccentric  Anomalies,  and  in 
Powers  of  the  Eccentricities  and  Inclinations"  1884. 

II.  Hill,  G.W.  "Determination  of  the  Inequalities  of  the  Moon's  Motion  Which 

are  Produced  by  the  Figure  of  the  Earth:  A  Supplement  to  Delaunav's 
Lunar  Theory"  1884. 

III.  Newcomb,  Simon  "On  the  Motion  of  Hyperion.  A  New  Case  in  Celestial 
Mechanics"  1884. 

IV.  Hill,  G.W.  "On  Certain  Lunar  Inequalities  Due  to  the  Action  of  Jupiter 
and  Discovered  by  Mr.  E.  Neison"  1885. 

V.  Newcomb,  Simon  "Periodic  Perturbations  of  the  Longitudes  and  Radii  Vec- 

tors of  the  Four  Inner  Planets  of  the  First  Order  as  to  the  Masses"  1891. 

Volume  IV 

Hill,  G.W.  "A  New  Theory  of  Jupiter  and  Saturn"  1890. 
Volume  V 

I.  Newcomb,  Simon  "A  Development  of  the  Perturbative  Function  in  Cosines  of 

Multiples  of  the  Mean  Anomalies  and  of  Angles  Between  the  Perihelia  and 
Common  Node  and  in  Powers  of  the  Eccentricities  and  Mutual  Inclination" 
1895. 

II.  Newcomb,  Simon  "Inequalities  of  Long  Period,  and  of  the  Second  Order  as 

to  the  Masses,  in  the  Mean  Longitudes  of  the  Four  Inner  Planets"  1895. 

III.  Newcomb,  Simon  "Theory  of  the  Inequalities  in  the  Motion  of  the  Moon 
Produced  by  the  Action  of  the  Planets"  1895. 

IV.  Newcomb,  Simon  "Secular  Variations  of  the  Orbits  of  the  Four  Inner  Plan- 
ets" 1895. 

V.  Newcomb,  Simon  "On  the  Mass  of  Jupiter  and  the  Orbit  of  Polyhymnia" 

1895. 


672 

Volume  VI 


EXPLANATORY  SUPPLEMENT 


Tables  of  the  four  inner  planets. 

I.  Newcomb,  Simon  "Tables  of  the  Motion  of  the  Earth  on  its  Axis  and  Around 

the  Sun"  1895. 

II.  Newcomb,  Simon  "Tables  of  the  Heliocentric  Motion  of  Mercury"  1895. 

III.  Newcomb,  Simon  "Tables  of  the  Heliocentric  Motion  of  Venus"  1895. 

IV.  Newcomb,  Simon  "Tables  of  the  Heliocentric  Motion  of  Mars"  1898. 

Volume  VII 

I.  Hill,  George  William  "Tables  of  Jupiter,  Constructed  in  Accordance  with  the 

Methods  of  Hansen,  and  Prepared  for  Use  in  the  Office  of  the  American 
Ephemeris  and  Nautical  Almanac"  1895. 

II.  Hill,  George  William  "Tables  of  Saturn,  Constructed  in  Accordance  with  the 

Methods  of  Hansen,  and  Prepared  for  Use  in  the  Office  of  the  American 
Ephemeris  and  Nautical  Almanac"  1898. 

III.  Newcomb,  Simon  "Tables  of  the  Heliocentric  Motion  of  Uranus"  1898. 

IV.  Newcomb,  Simon  "Tables  of  the  Heliocentric  Motion  of  Neptune"  1898. 

Volume  VIII 

I.  Newcomb,  Simon  "A  New  Determination  of  the  Precessional  Constant  with 

the  Resulting  Precessional  Motions"  1897. 

II.  Newcomb,  Simon  "Catalogue  of  Fundamental  Stars  for  the  Epochs  1875  and 

1900  Reduced  to  an  Absolute  System"  1899. 

III.  Hedrick,  Henry  B.  "Catalogue  of  Zodiacal  Stars  for  the  Epochs  1900  and 
1920  Reduced  to  an  Absolute  System"  1905. 

Volume  IX 

I.  Newcomb,  Simon  "Researches  on  the  Motion  of  the  Moon.  Part  II.  The  Mean 

Motion  of  the  Moon  and  Other  Astronomical  Elements  Derived  from  Ob- 
servations of  Eclipses  and  Occupations  Extending  from  the  Period  of  the 
Babylonians  until  A.D.  1908"  1912. 

II.  Ross,  Frank  E.  "New  Elements  of  Mars  and  Tables  for  Correcting  the  He- 

liocentric Positions  Derived  from  Astronomical  Papers,  Vol.  VI,  Part  IV" 
1917. 

III.  Eichelberger,  W.S.  and  Newton,  Arthur  "The  Orbit  of  Neptune's  Satellite 
and  the  Pole  of  Neptune's  Equator"  1926. 

Volume  X 

I.  Eichelberger,  W.S.  "Positions  and  Proper  Motions  of  1504  Standard  Stars 
for  the  Equinox  1925.0"  1925. 


14  /  RELATED  PUBLICATIONS 

673 

II.  Robertson,  James  "Catalog  of  3539  Zodiacal  Stars  for  the  Equinox  1950.0" 
1940. 

Volume  XI 

I.  Clemence,  G.M.  "The  Motion  of  Mercury  1765-1937"  1943 

II.  Clemence,  G.M.  "First-order  Theory  of  Mars"  1949 

III.  Morgan,  H.R.  "Definitive  Positions  and  Proper  Motions  of  Primary  Refer 
ence  Stars  for  Pluto"  1950.  V  r" 

IV.  Herget  Paul,  Clemence,  G.M.,  and  Hertz,  Hans  G.  "Rectangular  Coordi- 
nates oi  Ceres,  Pallas,  Juno,  Vesta  1920-1960"  1950. 

Volume  XII 

Eckert,  W.J.,  Brouwer,  Dirk,  and  Clemence,  G.M.  "Coordinates  of  the  Five 
Outer  Planets  1653-2060"  1951. 

Volume  Xffl 

I.  van  Woerkom,  A.J.J.  "The  Motion  of  Jupiter's  Fifth  Satellite  1892-1949" 

1950. 

II.  Brouwer  Dirk  and  van  Woerkom,  A.J.J.  "The  Secular  Variations  of  the 

Orbital  Elements  of  the  Principal  Planets"  1950 

III.  Morgan,  H.R.  "Catalog  of  5268  Standard  Stars,  1950.0.  Based  on  the  Nor- 
mal System  N30"  1952. 

IV.  Clemence,  G.M.  "Coordinates  of  the  Center  of  Mass  of  the  Sun  and  the 
Five  Outer  Planets,  1800-2060"  1953. 

V.  Clemence,  G.M.  "Perturbations  of  the  Five  Outer  Planets  by  the  Four  Inner 

Ones"  1954. 

Volume  XIV 

Herget,  Paul  "Solar  Coordinates  1800-2000"  1953. 
Volume  XV 

I.  Woolard,  Edgar  W.  "Theory  of  the  Rotation  of  the  Earth  Around  Its  Center 

of  Mass"  1953. 

II.  Hertz,  Hans  G.  "The  Mass  of  Saturn  and  the  Motion  of  Jupiter  1884-1948" 

1953. 

III.  Herget,  Paul  "Coordinates  of  Venus  1800-2000"  1955. 
Volume  XVI 

I.  Duncombe,  Raynor  L.  "Motion  of  Venus  1750-1949"  1958. 

II.  Clemence,  G.M.  "Theory  of  Mars-Completion"  1961. 

III.  Herget.  Paul  "Rectangular  Coordinates  of  Ceres,  Pallas.  Juno  Vesta  1960 
1980"  1962. 


674  EXPLANATORY  SUPPLEMENT 

Volume  XVII 

Watts,  C.B.  "The  Marginal  Zone  of  the  Moon"  1963. 


Volume  XVIII 

Jarnagin,  Jr.,  Milton  P.  "Expansions  in  Elliptic  Motion"  1965. 
Volume  XIX 

I.  Franz.  Otto  G.  and  Mintz,  Betty  F.  "Tables  of  X  and  Y-  Elliptic  Rectangular 

Coordinates"  1964. 

II.  Eckert,  W.J.  and  Smith,  Jr.,  Harry  F.  "The  Solution  of  the  Main  Problem 

of  the  Lunar  Theory  by  the  Method  of  Airy"  1966. 

Volume  XX 

L  Jackson,  Edward  S.  "Determination  of  the  Equinox  and  Equator  from  Merid- 
ian Observation  of  the  Minor  Planets"  1968. 

II.  Duncombe,  Raynor  L.  "Heliocentric  Coordinates  of  Ceres,  Pallas,  Juno, 

Vesta  1928-2000"  1969. 

III.  O'Handley,  Douglas  A.  "Determination  of  the  Mass  of  Jupiter  from  the 
Motion  of  65  Cybele"  1969. 

Volume  XXI 

I.  Janiczek,  Paul  M.  "The  Orbit  of  Polyhymnia  and  the  Mass  of  Jupiter"  1971. 

II.  Fiala,  Alan  D.  "Determination  of  the  Mass  of  Jupiter  from  a  Study  of  the 

Motion  of  57  Mnemosyne"  1972. 

III.  Branham,  Jr.,  Richard  L.  "The  Orbits  of  Five  Minor  Planets  and  Correc- 
tions to  the  FK4  Equator  and  Equinox"  1979. 

Volume  XXII 

I.  Cohen,  C.J.,  Hubbard,  E.C.,  and  Oesterwinter,  Claus  "Elements  of  the  Outer 

Planets  for  One  Million  Years"  1973. 

II.  Jackson,  Edward  S.  "A  Discussion  of  the  Observations  of  Neptune  1846 

1970"  1974. 

III.  Pierce,  David  A.  "Star  Catalog  Corrections  Determined  from  Observations 
of  Selected  Minor  Planets"  1978. 

IV.  Laubscher,  Roy  Edward  "The  Motion  of  Mars  1751-1969"  1981. 

Volume  XXIII 

I.  Gutzwiller,  Martin  C.  and  Schmidt,  Dieter  S.  "The  Motion  of  the  Moon  as 
Computed  by  the  Method  of  Hill,  Brown,  and  Eckert"  1986. 


14  /  RELATED  PUBLICATIONS 

14.3    UNITED  STATES  NAVAL  OBSERVATORY  CIRCULARS 


675 


United  States  Naval  Observatory  Circulars  are  issued  irregularly  to  disseminate 
astronomical  data  concerning  ephemerides  or  astronomical  phenomena. 

Circulars  are  available  from  the  U.S.  Naval  Observatory,  Washington,  DC  20392. 
Copies  of  the  first  100  circulars  are  no  longer  available.  Circulars  from  101  onward 
are  available  with  the  exceptions  of  103,  104,  109,  115,  118,  and  138.  The  content 
of  the  first  one  hundred  circulars  can  be  summarized  as  follows: 


Subject 

Circular  tt 

Sunspots.  positions,  areas,  counts 

3,  4,  6,  8-13,  15,  17,  19,  21-26,  28-39.  41-48,  50-52,  54-58  60-77 
79-84,  86,  87 

Eclipses,  1952-1964 

1,2,  16,  27,  40,  53,  59,  78,  85,  88,  89 

Minor  Planet  Ephemerides 

5,  7,  18,  20 

Naval  Observatory  Time  Service 

14,  49 

Ephemeris  of  Mars 

90,  95.  98 

Coordinates  of  the  Moon 

91 

Radio  Longitude  of  the  Meridian  of  Jupiter 

92,94 

GC  and  DM  Numbers 

93 

Distance  and  Velocity  of  Venus 

96 

Polaris  and  Equation  of  Time 

97 

Machine  Readable  Data 

99 

Index 

100 

United  States  Naval  Observatory  Circulars,  #101  onward 


No.  Title 


101  Solar  Eclipses,  1971-1975 

1 02  Total  Solar  Eclipse  of  30  May  1 965 

103  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

104  Durchmusterung  and  Henry  Draper  Numbers  of  Albany  General  Catalog  Stars 

105  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

1 06  Rectangular  Coordinates  of  Mercury  1 800-2000 

1 07  Sunlight,  Moonlight ,  and  Twilight  for  Antarctica  1 966-1 968 

108  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

1 09  Annular  Solar  Eclipse  of  20  May  1 966 

1 1 0  Total  Solar  Eclipse  of  1 2  November  1 966 

1 1 1  Astronomical  Data  in  Machine  Readable  Form 

1 1 2  Phases  of  the  Moon  1 800-1 959 

113  Solar  Eclipses,  1976-1980 

114  Astronomical  Data  in  Machine  Readable  Form 

115  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

1 1 6  Total  Solar  Eclipse  of  22  September  1 968 

1 1 7  Ephemeris  of  trie  Radio  Longitude  of  the  Central  Meridian  of  Jupiter  System  III  (1957.0) 

118  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

1 1 9  Phases  of  the  Moon  1 960-2003 

120  Sunlight,  Moonlight,  and  Twilight  for  Antarctica  1969-1971 

121  A  Linotron  System  Manual  for  the  Photo-Composition  of  Astronomical  and  Mathematical  Tables 

122  Annular  Solar  Eclipse  of  18  March  1969 

123  Annular  Solar  Eclipse  of  1 1  September  1969 


676 

United  States  Naval  Observatory  Circulars,  continued 


EXPLANATORY  SUPPLEMENT 


No.  Title 


124  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

1 25  Total  Solar  Eclipse  of  7  March  1 970 

126  Annular  Solar  Eclipse  of  31  August-1  September  1970 

127  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

128  Astronomical  Data  in  Machine  Readable  Form 

129  Annular  Solar  Eclipse  of  16  January  1972 

1 30  Perigee  and  Apogee  of  the  Moon  1 959-1 999 

131  Total  Solar  Eclipse  of  1 0  July  1 972 

132  Sunlight,  Moonlight,  and  Twilighl  lor  Antarctica  1972-1974 

1 33  Sunspot  Areas  1 907-1 970 

134  Normalized  Observations  of  Venus  1901-1949 

1 35  Total  Solar  Eclipse  of  30  June  1 973 

1 36  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

137  Ephemeris  of  the  Radio  Longitude  of  the  Central  Meridian  of  Jupiter  System  III  (1957.0) 

1 38  Geocentric  Solar  Data 

139  Astrometric  Ephemeris  of  Pluto  1970-1990 

1 40  Rectangular  Coordinates  of  the  Moon  1 971  -1 980 

141  Lunar  Limb  Profiles  for  Solar  Eclipses 

1 42  Solar  Eclipses,  1 981-1 990 

143  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

144  Total  Solar  Eclipse  Of  20  June  1974 

1 45  Normalized  Observations  of  Mercury  1901-1937 

146  Astronomical  Data  in  Machine  Readable  Form 

147  Sunlight,  Moonlight,  and  Twilight  for  Antarctica  1975-1977 

148  Physical  Ephemeris  of  Mars 

149  Fortran  Automatic  Typesetting  System 

150  Index  to  United  States  Naval  Observatory  Circulars  Nos.  101-150 

1 5 1  Apparent  Ephemeris  of  Mars  1 960-1 980 

1 52  Total  Solar  Eclipse  of  23  October  1 976 

153  Coordinates  of  U.S.  Naval  Observatory  Installations 

154  The  Determination  of  Universal  Time  at  the  U.S.  Naval  Observatory 

1 55  Almanac  for  Computers ,  1 977 

1 56  Solar  Eclipses  of  1 977 

157  Total  Solar  Eclipse  ot  26  February  1979 

1 58  Total  Solar  Eclipse  of  1 6  February  1 980 

159  Observations  of  the  Sun,  Moon,  and  Planets/Six-lnch  Transit  Circle  Results 

1 60  Total  Solar  Eclipse  of  31  July  1 981 

161  Ephemeris  of  the  System  III  (1965)  Longitude  of  the  Central  Meridian  of  Jupiter 

162  Geocentric  Ephemeris  of  Pluto  1975-1985 

163  The  IAU  Resolutions  on  Astronomical  Constants,  Time  Scales,  and  the  Fundamental  Reference  Frame 

164  Astronomical  Data  in  Machine  Readable  Form 

1 65  Total  Solar  Eclipse  of  1 1  June  1 983 

166  Annular  Solar  Eclipse  of  30  May  1 984 

167  Project  Merit  Standard 

1 68  Total  Solar  Eclipse  of  22-23  November  1 984 

1 69  Phases  of  the  Moon  2000-2049 

170  Solar  Eclipses,  1991-2000 

171  Computer  Programs  for  Sun  and  Moon  Illuminance  with  Contingent  Tables  and  Oiagrams 

1 72  Total  Solar  Eclipse  of  1 7- 1 8  March  1 988 

1 73  Total  Solar  Eclipse  of  22  July  1 990 

1 74  Total  Solar  Eclipse  of  1 1  July  1 991 

1 75  Annular  Solar  Eclipse  of  1 5-1 6  January  1 991 

1 76  Central  Solar  Eclipses  ot  1 992 

177  On  High  Frequency  Spectral  Analysis  of  Very  Noisy  Stochastic  Processes  and  Its  Application  to  ERP 
Series  Determined  by  VLBI  and  SLR 


14  /  RELATED  PUBLICATIONS  677 

1 4.4    PUBLICATIONS  OF  THE  UNITED  STATES  NAVAL  OBSERVATORY, 
SECOND  SERIES 

The  Publications  of  the  United  States  Naval  Observatory,  Second  Series  are  issued 
irregularly  to  disseminate  observational  results.  These  publications,  from  Volume 
XVII  onward,  are  available  from  the  U.S.  Naval  Observatory.  Washington,  DC 
20392. 


Volume  I 

Harkness,  W.  and  Skinner,  A.N.  "Transit  Circle  Observations  of  the  Sun, 
Moon,  Planets,  and  Miscellaneous  Stars,  1894-1899"  1900. 


Volume  II 


Skinner,  A.N.  "Zone  Observations  with  the  Nine-Inch  Transit  Circle,  1894- 
1901"  1902. 


Volume  III 

I.  See,  T.J.J.  "Observations  of  Eros  with  the  Twenty-Six  Inch  Equatorial,  1900- 

1901"  1903. 

II.  King,  T.I.  "Observations  of  Eros  and  Reference  Stars  with  the  Nine-Inch 

Transit  Circle,  1900-1901"  1903. 

III.  Eichelberger,  W.S.  "Observations  of  495  Zodiacal  Stars  with  the  Nine-Inch 
Transit  Circle,  1900"  1903. 

IV.  Updegraff,  M.  "Observations  with  the  Six-Inch  Transit  Circle,  1900-1901" 
1903. 

V.  Ingersoll,  R.R.,  Bowman,  C.G.,  and  Taylor,  H.  "Observations  with  the  Prime 

Vertical  Transit  Instrument,  1882-1884"  1903. 

Volume  IV 

L  "Transit  Circle  Observations  of  the  Sun,  Moon,  Planets,  and  Miscellaneous 
Stars,  1900-1903"  1906. 

II.  Eastman,  J.R.  "Transit  Circle  Observations  of  the  Sun,  Moon,  Planets,  and 

Comets,  1866-1891"  1906. 

III.  Updegraff,  M.  "Observations  with  the  Six-Inch  Transit  Circle,  1901-1902" 
1906. 

IV.  Appendices 

I.  "Total  Solar  Eclipses  of  May  28,  1900,  and  May  17,  1901"  1906. 

II.  Eichelberger,  W.S.  "Reduction  Tables  for  Transit  Circle  Observations" 

1906. 

III.  Frederick,  C.W.  "Reduction  Tables  for  Equatorial  Observations"  1906. 

IV.  Hayden,  Edward  Everett  "The  Present  Status  of  the  Use  of  Standard 
Time"  1906. 


678 

Volume  V 


EXPLANATORY  SUPPLEMENT 


"Meteorological  Observations  and  Results,  1893-1902"  1903. 
Volume  VI 

"Equatorial  Observations,  1893-1907"  1911. 
Appendices 

I.  "Miscellaneous  Astronomical  Papers  by  Members  of  the  Naval  Observa- 

tory Staff"  1911. 

II.  "Miscellaneous  Reports  on  the  Transit  of  Mercury  of  November  10, 

1894"  1911. 

III.  Horigan,  Wm.D.  "List  of  Publications  Issued  by  the  United  States 
Naval  Observatory,  1845-1908"  1911. 

Volume  VII 

Eichelberger,  W.S.  and  Littell,  F.B.  "Catalogue  of  23521  Stars  between  13°35' 
and  45°25'  South  Declination  for  the  Equinox  1850  from  Zone  Observations 
Made  at  the  United  States  Naval  Observatory,  1846-1852"  1911. 

Volume  VIII 

Littell,  F.B.,  Hill,  G.A.,  and  Evans,  H.B.  "Vertical  Circle  Observations  Made 
with  the  Five-Inch  Alt-Azimuth  Instrument,  1898-1907"  1914. 

Volume  IX 

I.  Eichelberger,  W.S.  and  Morgan,  H.R.  "Results  of  Observations  with  the  Nine- 

Inch  Transit  Circle,  1903-1911"  1920. 

II.  Eichelberger,  W.S.  "Observations  Made  with  the  Nine-Inch  Transit  Circle, 

1903-1908"  1915. 

III.  Littell,  F.B.  and  Eichelberger,  W.S.  "Observations  Made  with  the  Nine- 
Inch  Transit  Circle,  1908-1911"  1918. 

IV.  Littell,  F.B.  and  Morgan,  H.R.  "Observations  Made  with  the  Nine-Inch 
Transit  Circle,  1912-1913"  1918. 

Appendix: 

Littell,  F.B.  and  Hill,  G.A.  "Determination  of  the  Difference  of  Longitude 
Between  Washington  and  Paris,  1913-1914"  1918. 

Volume  X 

I.  Hill,  G.A.  "Observations  Made  with  the  Prime  Vertical  Transit  Instrument, 

1893-1912"  1926. 

II.  "Total  Solar  Eclipses  of  August  30,  1905,  and  June  8,  1918,  with  Aviators' 

Notes  on  the  Total  Solar  Eclipse  of  September  10,  1923"  1926. 


14  /  RELATED  PUBLICATIONS 

Volume  XI 


679 


Hammond,  J,C,  and  Watts,  C.B.  "Results  of  Observations  with  the  Six-Inch 
Transit  Circle,  1909-1918"  1927. 

Volume  XII 

I.  "Equatorial  Observations,  1908-1926"  1929. 

II.  "Photographic  Equatorial  Observations,  1912-1924  and  Photoheliographic 

Observations,  1917-1927"  1929. 
Appendix: 

Littell,  F.B.,  Hammond,  J.C.,  Watts,  C.B.,  and  Sollenberger,  P.  "World 
Longitude  Operation  of  1926 — Results  of  Observations  at  San  Diego 
and  Washington"  1929. 

Volume  Xm 

Morgan,  H.R.  "Results  of  Observations  with  the  Nine-Inch  Transit  Circle, 
1913-1926.  Observations  of  the  Sun,  Moon,  and  Planets.  Catalogue  of  9,989 
Standard  and  Intermediary  Stars.  Miscellaneous  Stars"  1933. 

Appendices 

I.  Vening  Meinesz,  F.A.  and  Wright,  F.E.  "The  Gravity  Measuring  Cruise 

of  the  U.S.  Submarine  S-21  with  an  Appendix  on  Computational  Pro- 
cedure" 1930. 

II.  Lamson,  Eleanor  A.  "Declinations  of  Stars  Derived  from  Observations 

with  the  Prime  Vertical  Transit  Instrument,  1921-1925"  1932. 

III.  "Total  Solar  Eclipses  of  January  24,  1925,  January  14,  1926  and  May 
9,  1929"  1932. 

IV.  Morgan,  H.R.  "Washington  Observations  of  the  Moon,  1894-1922" 
1932. 

Volume  XIV 

I.  Hammond,  J.C.  "Catalog  of  3,520  Zodiacal  Stars  Based  on  Observations  with 

the  Six-Inch  Transit  Circle,  1928-1930  Reduced  Without  Proper  Motion  to 
the  Equinox  1925.0"  1938. 

II.  Morgan,  H.R.  and  Lyons,  U.S.  "Results  of  Observations  on  the  Nine-Inch 

Transit  Circle,  1932-1934.  Positions  and  Proper  Motions  of  1,117  Reference 
Stars  in  Declination  -10°  to  ^20°.  Miscellaneous  Stars"  1938. 

III.  Littell,  F.B.,  Morgan,  H.R.,  and  Raynsford,  G.M.  "Vertical  Circle  Observa- 
tions Made  with  the  Five-Inch  Alt-Azimuth  Instrument,  1916-1933.  Cat- 
alog of  Declinations  of  Standard  Stars.  Declinations  of  the  Sun,  Mercury, 
and  Venus"  1938. 

IV.  Morgan,  H.R.  "Proper  Motions  of  2,916  Intermediary  Stars  Mostly  in  Dec- 
lination -5°  to  -30°"  1938. 


680 


EXPLANATORY  SUPPLEMENT 


V.  Watts,  C.B.,  Sollenberger,  P.,  and  Willis,  J.E.  "World  Longitude  Operation 
of  1933  at  San  Diego  and  Washington"  1938. 

Volume  XV 

I.  Wylie,  L.R.  "A  Comparison  of  Newcomb's  Tables  of  Neptune  with  Observa- 

tion, 1795-1938"  1942. 

II.  Clemence,  G.M.  and  Whittaker,  G.C.  "Observations  of  the  Transit  of  Mer- 

cury November  11-12,  1940"  1942. 

III.  Wylie,  L.R.  "An  Investigation  of  Newcomb's  Theory  of  Uranus"  1947. 

IV.  Burton,  H.E.,  Lyons,  U.S.,  Raynsford,  G.M.,  Wylie,  L.R.,  Browne,  W.M., 
and  Smith,  J.L.  "Observations  of  Double  Stars  Made  with  the  26-Inch 
Equatorial  of  the  U.S.  Naval  Observatory,  1928-44"  1947. 

V.  Morgan  H.R.  and  Scott,  F.P.  "Results  of  Observations  Made  with  the  Nine- 

Inch  Transit  Circle,  1935-1945.  Observations  of  the  Sun  and  Planets.  Cat- 
alog of  5,446  Stars.  Corrections  to  GC  and  FK3"  1948. 

Volume  XVI 

I.  Watts,  OB.  and  Adams,  A.N.  "Results  of  Observations  Made  with  the  Six- 

Inch  Transit  Circle,  1925-1941.  Observations  of  the  Sun,  Moon,  and  Plan- 
ets. Catalog  of  2,383  Stars  for  1925.0.  Catalog  of  1,536  Stars  for  1950.0. 
Corrections  to  GC  and  FK3"  1949. 

II.  Watts,  OB.  "Description  of  the  Six-Inch  Transit  Circle.  Instrumental  De- 

velopments, 1932-1948"  1950. 

III.  Watts,  C.B.,  Scott,  F.P.,  and  Adams,  A.N.  "Results  of  Observations  Made 
with  the  Six-Inch  Transit  Circle,  1941-1949.  Observations  of  the  Sun,  Moon, 
and  Planets.  Catalog  of  5,216  Stars  for  1950.0.  Corrections  to  GC  and  FK3" 
1952. 

Volume  XVII 

I.  Hall,  John  S.  and  Mikesell,  A.H.  "Polarization  of  Light  in  the  Galaxy  as 

Determined  from  Observations  of  551  Early- Type  Stars"  1950. 

II.  Lyons,  U.S.  and  Wylie,  L.R.  "Observations  of  Double  Stars  Made  with  the 

26-Inch  Equatorial  of  the  U.S.  Naval  Observatory,  1945-1948"  1953. 

III.  Hall,  Jr.,  A.,  Burton,  H.E.,  Lyons,  U.S.,  Wylie,  L.R.,  Raynsford,  G.M., 
Browne,  W.M.,  and  Smith,  J.L.  "Observations  of  Satellites  Made  with  the 
26-Inch  Equatorial  of  the  U.S.  Naval  Observatory,  1928-1947"  1953. 

IV.  Mikesell,  A.H.  "The  Scintillation  of  Starlight"  1955. 

V.  Markowitz,  W.  "Observations  of  Double  Stars,  1949-52,  and  a  Study  of  the 

Optics  of  the  26-Inch  Refractor"  1956. 

VI.  Hall,  J.S.  "Polarization  of  Starlight  in  the  Galaxy"  1958. 

VII.  Hoag,  A.A.,  Johnson,  H.L.,  Iriarte,  B.,  Mitchell,  R.I.,  Hallam,  K.L.,  and 
Sharpless,  S.  "Photometry  of  Stars  in  Galactic  Cluster  Fields"  1961. 


14  /  RELATED  PUBLICATIONS 

Volume  XVI 1 1 


681 


I.  Franz,  O.G.,  Gossner,  J.L.,  Josties,  F.J.,  Lindenblad,  I.W.,  Mikesell,  A.H. 
Mintz,  B.F.,  and  Riddle,  R.K.  "Photographic  Measures  of  Double  Stars" 
1963. 

IIA.  Mikesell,  A.H.  "Mechanical  Improvement  of  the  26-Inch  Refractor"  1968. 

IIB.  Riddle,  R.K,  "A  Study  of  the  Optical  Properties  of  the  26-Inch  Refractor" 
1968. 

III.  Worley,  C.E.  "A  Catalog  of  Visual  Binary  Orbits"  1963. 

IV.  Walker,  Jr.,  R.L.  "Micrometer  Measures  of  256  Double  Stars"  1966. 

V.  Strand,  K.  Aa.  "Photovisual  Magnitude  Differences  of  Double  Stars"  1969. 

VI.  Worley,  C.E.  "Micrometer  Measures  of  1164  Double  Stars"  1967. 

VII.  Kallarakal,  V.V,  Lindenblad,  I.W.,  Josties,  F.J,  Riddle,  R.K,  Miranian, 
M,  Mintz,  B.F,  and  Klugh,  A.P.  "Photographic  Measures  of  Double  Stars"' 
1969. 

Volume  XIX 

L  Adams,  A.N,  Bestul,  S.M,  and  Scott,  D.K.  "Results  of  Observations  Made 
with  the  Six-Inch  Transit  Circle,  1949-1956.  Observations  of  the  Sun,  Moon, 
and  Planets.  Catalog  of  5,965  Stars  for  1950.0.  Corrections  to  FK4  Gc' 
and  N30"  1964. 

II.  Adams,  A.N.  and  Scott,  D.K.  "Results  of  Observations  Made  with  the  Six- 

Inch  Transit  Circle,  1956-1962.  Observations  of  the  Sun,  Moon,  and  Plan- 
ets. Catalog  of  2,554  Stars  for  1950.0.  Corrections  to  FK4,  GC  and  N30" 
1968. 

III.  Adams,  A.N,  Klock,  B.L,  and  Scott,  D.K.  "Washington  Meridian  Obser- 
vations of  the  Moon.  Six-Inch  Transit  Circle  Results,  1925-1968"  1969. 

Volume  XX 

I.  Strand,  K.  Aa.  "The  61-Inch  Astrometric  Reflector  System"  1971. 

II.  Hoag,  A. A,  Priser,  J.B,  Riddle,  R.K,  and  Christy,  J.W.  "Installation, 

Tests,  and  Initial  Performance  of  the  61-Inch  Astrometric  Reflector"  1967. 

IIIA.  Riddle,  R.K.  "First  Catalog  of  Trigonometric  Parallaxes  of  Faint  Stars— 
Astrometric  Results"  1970. 

IIIB.  Priser,  J.B.  "First  Catalog  of  Trigonometric  Parallaxes  of  Faint  Stars- 
Photometric  Results"  1970. 

IIIC.  Strand,  K.  Aa.  and  Riddle,  R.K.  "First  Catalog  of  Trigonometric  Paral- 
laxes of  Faint  Stars — Discussion"  1970. 

IV.  Abies,  H.D.  "Optical  Study  of  Nearby  Galaxies"  1971. 

V.  Kron,  G.E,  Guetter,  H.H,  and  Riepe,  B.Y.  "A  Catalog  of  Colorimetric 

Measures  of  Stars  on  the  Six-Color  System  of  Stebbins  and  Whitford" 
1972. 

VI.  Routly,  P.M.  "Second  Catalog  of  Trigonometric  Parallaxes  of  Faint  Stars" 
1972. 


EXPLANATORY  SUPPLEMENT 

VII.  Priser,  J.B.  "UBV  Sequences  in  Selected  Areas"  1974. 


Volume  XXI 

Blanco,  V.M.,  Demers,  S.,  Douglass,  G.G.,  and  Fitzgerald,  MP.  "Photoelectric 
Catalogue.  Magnitudes  and  Colors  of  Stars  in  the  U,  B,  V  and  Uc,  B,  V 
Systems"  1968. 

Volume  XXII 

i.  Walker,  Jr.,  R.L.  "Micrometer  Measures  of  463  Double  Stars"  1969. 

II.  Worley,  C.E.  "Micrometer  Measures  of  1,343  Double  Stars  "  1971. 

III.  Harrington,  R.S,  and  Mintz,  B.F.  "Positions  of  Bright  Minor  Planets"  1972. 

IV.  Worley,  C.E.  "Micrometer  Measures  of  1,056  Double  Stars"  1972. 

V.  Walker,  Jr.,  R.L.  "Micrometer  Measures  of  618  Double  Stars"  1972. 

VI.  Josties,  F.J.,  Dahn,  C.C.,  Kallarakal,  V.  V.,  Miranian,  M.,  Douglass,  G.G., 
Christy,  J.W.,  Behall,  A.L.,  and  Harrington,  R.S.  "Photographic  Measures 
of  Double  Stars"  1974. 

Volume  XXm 

I.  Rhynsburger,  RW.  and  Gauss,  F.S.  "Catalog  of  Proper  Motions  for  the  5,965 
Stars  of  the  Six-Inch  Transit  Circle  Program,  1949-1956"  1975. 

H.  Rhynsburger,  R.W.,  Gauss,  F.S.,  and  Crull,  Jr.,  H.E.  "Motions  and  Phys- 

ical Properties  of  1,086  Cepheids  and  Early- Type  Stars  Observed  in  the 
Washington  Six-Inch  Transit  Circle  Program,  1949-1956"  1980. 
III.  Hughes,  J. A.  and  Scott,  D.K.  "Results  of  Observations  Made  with  the 
Six-Inch  Transit  Circle,  1963-1971.  Observations  of  the  Sun,  Moon,  and 
Planets.  Catalog  of  14,916  Stars  for  1950.0.  Comparison  with  FK4,  GC, 
and  N30"  1982. 

Volume  XXIV 

I.  Harrington,  R.S.,  Dahn,  C.C.,  Behall,  A.L.,  Priser,  J.B.,  Christy,  J.W.,  Riepe, 

B.Y.,  Abies,  H.D.,  Guetter,  H.H.,  Hewitt,  A.V.,  and  Walker,  R.L.  "Third 
Catalog  of  Trigonometric  Parallaxes  of  Faint  Stars"  1975. 

II.  Behall,  A.L.  "Micrometer  Measures  of  267  Double  Stars"  1976. 

III.  Dahn,  C.C.,  Harrington,  R.S.,  Riepe,  B.Y.,  Christy,  J.W.,  Guetter,  H.H., 
Behall,  A.L.,  Walker,  R.L.,  Hewitt,  A.V.,  and  Abies,  H.D.  "Fourth  Catalog 
of  Trigonometric  Parallaxes  of  Faint  Stars"  1976. 

IV.  Harrington,  R.S.,  Dahn,  C.C.,  Miranian,  M.,  Riepe,  B.Y.,  Christy,  J.W., 
Guetter,  H.H.,  Abies,  H.D.,  Hewitt,  A.V.,  Vrba,  F.J.,  and  Walker,  R.L. 
"Fifth  Catalog  of  Trigonometric  Parallaxes  of  Faint  Stars"  1978. 

V.  Josties,  F.J.,  Kallarakal,  V.V.,  Douglass,  G.G.,  and  Christy,  JW.  "Photo- 

graphic Measures  of  Double  Stars"  1978. 


14  /  RELATED  PUBLICATIONS 


683 


VI.  Worley,  C.E.  "Micrometer  Measures  of  1,980  Double  Stars"  1978. 

VII.  Worley,  C.E.  and  Heintz,  W.D.  "Fourth  Catalog  of  Orbits  of  Visual  Binary 
Stars"  1983. 


Volume  XXV 

I.  Rydgren,  A.E,,  Schmelz,  J.T.,  Zak,  D.S.,  and  Vrba,  F.J.  "Broad  Band  Spec- 

tra] Energy  Distributions  of  T  Tauri  Stars  in  the  Taurus-Auriga  Region" 
1984. 

II.  Walker,  Jr.,  R.L.  "Micrometer  Measures  of  711  Double  Stars"  1985. 

III.  Worley,  C.E.  "Micrometer  Measures  of  2589  Double  Stars"  1989. 


Volume  XXVI 

I.  Scott,  D.K.  "Results  of  Observations  Made  with  the  Six-Inch  Transit  Circle, 

1956-1962.  Catalog  of  10,010  AGK3R  Stars  for  1950.0.  Comparison  with 
GC  and  N30"  1987. 

II.  Hughes,  J. A.,  Smith,  OA.,  and  Branham,  R.L.  "Results  of  Observations 

Made  with  the  Seven-Inch  Transit  Circle,  1967-1973"  1992. 


684 


EXPLANATORY  SUPPLEMENT 


14.5    SELECTED  NAO  TECHNICAL  NOTES  OF  THE  ROYAL  GREENWICH 
OBSERVATORY 


The  NAO  Technical  Notes  are  published  irregularly  by  the  Royal  Greenwich  Ob- 
servatory to  disseminate  technical  information  of  specific  interest. 


No. 


Author 


Title 


Year 


6  Hobden,  D.E. 
11     Sadler,  D.H. 


12 

18 
26 


29 
31 

36 
37 


47 
48 
53 

54 
55 

56 
57 
58 


62 

63 

64 
65 


Scott,  W.A. 
Sadler,  D.H. 
Taylor,  G.E. 
Sinclair,  A.T. 


Taylor,  G.E. 
Wilkins,  G.A. 

Sinclair,  A.T. 
Sinclair,  A.T. 


39     Watson,  F.G. 


40      Morrison,  L.V. 


46      Yallop,  B.D. 


Emerson,  B. 
Emerson,  B. 
Sinclair,  A.T. 

Yallop,  B.D. 
Yallop,  B.D. 
Emerson,  B. 
Emerson,  B. 
Yallop,  B.D. 
Yallop,  B.D. 


59      Sinclair,  A.T. 


Yallop,  B.D. 
Hohenkerk,  C.Y. 
Hohenkerk,  C.Y, 
Sinclair,  A.T. 
Yallop,  B.D. 
Hohenkerk,  C.Y. 


Computations  for  the  Decca  Hyperbolic  Lattice  1966 
System 

Interpolation  in  H.0. 299,  Sight  Reduction  Tables  for  1966 
Marine  Navigation 

Corrections,  for  Irradiation,  to  the  Observed  Altitude  1 967 
of  the  Sun 

Predictions  of  Grazing  Occultations  1970 
The  Representation  of  Planetary  Ephemerides  for  1971 
use  in  the  Automatic  Reduction  of  Navigational 
Sights 

The  Visual  Observation  of  Occultations  1974 
The  Future  Publication  of  Astronomical  1974 
Ephemerides 

The  Orbits  of  Tethys,  Dione,  Rhea,  and  Titan  1974 
The  Tabulation  of  Monthly  Sets  of  Polynomial  Coef-     1 975 
ficients  for  Astronomical  Data  in  the  Star  Almanac 
for  Land  Surveyors 

The  Zenithal  Blind  Spot  of  a  Large  Altazimuth  1976 
Telescope 

The  Movements  of  the  Sun,  Moon,  and  Stars  in  the  1976 
Sky 

Formulae  for  Computing  Astronomical  Data  with  1978 
Hand-Held  Calculators 

Approximate  Solar  Coordinates  1 978 

Approximate  Lunar  Coordinates  1979 
The  Computation  of  Physical  Ephemerides  of  Plan-  1 980 
ets  and  Satellites 

Geocentric  and  Heliocentric  Phenomena  1981 
The  Phase  Correction  for  Venus  1 981 

Approximate  Coordinates  of  Jupiter  and  Saturn  1981 
Ground  Illumination  1986 
Formulae  for  Determining  Carrington's  Elements  1982 
and  Differential  Solar  Rotation 

The  Effect  of  Atmospheric  Refraction  on  Laser  1982 
Ranging  Data 

Coefficients  for  Calculating  the  GHA  and  DEC  of  1985 
Stars 

The  Computation  of  Angular  Atmospheric  Refrac-  1 985 
tion  at  Large  Zenith  Angles 

Algorithms  for  Calculating  the  Dates  of  Easter  1 986 

Determination  of  Polynomial  Coefficients  from  B-  1986 
Spline  Coefficients 


14  /  RELATED  PUBLICATIONS 

14.6    LISTS  OF  APPENDICES  AND  SUPPLEMENTS 


685 


14.61    The  British  Nautical  Almanac 

Many  issues,  especially  the  earlier  years,  of  the  almanac  contain  appendices  on 
various  astronomical  and  navigational  subjects.  A  list  of  these  and  of  separate  sup- 
plements, together  with  sections  of  a  similar  nature  in  the  prefaces  and  explanations 
to  certain  issues,  is  given  below.  Unaltered,  or  nearly  unaltered,  reprints  in  later 
issues  are  ignored. 

The  appendices  to  the  almanacs  for  1772  to  1778,  1787,  1788,  and  1794  were 
collected  and  published  in  1813  with  the  title  Selections  from  the  Additions  That 
Have  Been  Occasionally  Annexed  to  The  Nautical  Almanac  from  its  Commencement 
to  the  Year  1812,  while  those  to  the  almanacs  for  1835  to  1854  were  similarly 
published  in  1851  with  the  title  Appendices  to  Various  Nautical  Almanacs  Between 
the  Years  1834  and  1854. 

1766:  Maskelyne,  N.,  et  al.  "Tables  Requisite  to  be  Used  with  The  Astro- 

nomical and  Nautical  Ephemeris."  Separate  publication,  166  pages. 

1769:  Maskelyne,  N.  "Instructions  Relative  to  the  Observation  of  the  En- 

suing Transit  of  the  Planet  Venus  over  the  Sun's  Disk,  on  the  3rd  of 
June  1769."  9  pages. 

Maskelyne,  N.  "Use  of  the  Astronomical  Quadrant  in  Taking  Alti- 
tudes." 38  pages. 

1771:  Douwes,  C.  and  Campbell,  J.  "Tables  for... Finding  the  Latitude  of  a 

Ship  at  Sea."  77  pages. 

Maskelyne,  N.  "Determination  [by  John  Bradley]  of  the  Position  of 
the  Lizard."  6  pages. 

Wargentin,  P.W.  "Tabulae  Novae  et  Correctae  Pro  Supputandis  Eclipsi- 
bus  Tertii  Satellites  Jovis..."  16  pages. 
1772:  Maskelyne,  N.  "A  Correct  and  Easy  Method  of  Clearing  the  [Lunar] 

Distance..."  25  pages. 

"Eclipses  of  Jupiter's  Third  Satellite,  and  Tables  of  the  Hour  Angle 
of  the  Sun  and  Jupiter."  6  pages. 

Lyons,  I.  and  Dunthorne,  R.  "Problems  in  Navigation."  8  pages. 
1773:  "A  Table  of  the  Equations  to  Equal  Altitudes."  24  pages. 

"A  Catalogue  of  the  Places  of  387Fixed  Stars,. ..(for  1760.0)."  14  pages. 
1774:  Mason,  C.  "Longitudes  and  Latitudes  of  the  Moon,  Deduced  from 

Dr.  Bradley's  Observations,  Made  Between  September  13th  1750  and 

November  2nd  1760,  and  Compared  with  a  Set  of  Manuscript.  Tables." 

36  pages. 

Maskelyne,  N.  "Elements  of  the  Lunar  Tables."  11  pages. 
Maskelyne,  N.  "Remarks  on  the  Hadley's  Quadrant."  14  pages. 


686  EXPLANATORY  SUPPLEMENT 

Lyons,  I.  "Astronomical  Problems."  10  pages. 
1778:  Mason,  C.  "Right  Ascensions  and  Zenith  Distances  of  the  Moon..." 

40  pages. 

Lyons,  I.  "Astronomical  Problems."  11  pages. 

1779:  Wargentin,  P.W.  "Tabulae  Novae  et  Correctae  Pro  Supputandis  Eclipsi- 

bus  Secundi  Satellitis  Jovis..."  30  pages. 

1781:  Edwards,  J.  "Astronomical  Problems."  27  pages. 

Edwards,  J.  "Addition  to  the... Tables  Annexed  to  the  Nautical  Al- 
manac of  1771."  10  pages. 

1787:  Edwards.  J.  "Directions  for  Making... Reflecting  Telescopes  and... 

Polishing... Them..."  48  pages. 

Edwards,  J.  and  Maskelyne,  N.  "An  Account  of  the... Tremors  of  Re- 
flecting Telescopes..."  12  pages. 
1788:  Blair,  R.  "Description  of  a.. .Method  of  Adjusting  Hadley's  Quad- 

rant." 20  pages. 

1791:  Maskelyne,  N.  "Advertisement  of  the  Expected... Comet  of.. .1788. 

and  Relative  to. ..Saturn's  Ring  in  1789  and  1790."  4  pages. 
1794:  Brinkley,  J.  "Tables  to  Improve. .  .the  Method  of  Finding  the  Latitude..." 

15  pages. 

1798:  Brinkley.  J.  "Tables  to  Improve... Latitude..."  (Second  edition,  re- 

vised and  corrected).  16  pages. 

1809-1821:  Each  issue  contains  one  or  more  catalogs  of  stars,  some  of  longitude 
and  latitude,  some  of  right  ascension  and  declination;  the  number  of 
stars  varies  between  9  and  about  50. 

1812:  Pond,  .1.  "On  the  Obliquity."  3  pages. 

1818:  Brinkley,  J.  "Two  Practical  Rules  for  Reducing  the  Observed  Distance 

of  the  Moon  from  the  Sun  or  a... Star..."  18  pages. 

1822:  Brinkley,  .1.  "A  Practical  Method  of  Computing  the  Latitude."  16  pages. 

1822  1833:  "Tables  of...  Refraction,... of  Second  Differences,  and... of  Star  Places." 
16-40  pages. 

1824-1833:     "Elements  of  Occupations."  6-17  pages. 
1826:  "Rules  for  [Predicting]  Occupations."  8  pages. 

1827:  Young,  T.  and  Henderson,  T.  "Rules  for  [Reducing]  Occupations." 

4  pages. 

1828-1833:  Separately  issued  supplements  for  each  of  these  years  contained  a 
number  of  quantities  that  were  transferred,  between  1832  and  1834, 
to  the  pages  of  the  almanac  proper, 

1829:  Lax,  W.  "An  Easy  Method  of  Finding  the  Latitude  and  Time  at 

Sea..."  23  pages. 

1831:  Lax,  W.  "An  Easy  Method  of  Correcting  the  Lunar  Distance..." 

6  pages. 


14  /  RELATED  PUBLICATIONS  Qqj 

1832:  Airy,  G.B.  "Corrections  of  the  Longitudes  and  Right  Ascensions  of 

the  Sun..."  4  pages. 

Jenkins.  H.  "Recalculated  Elements  of  Delambre's  Tables...  of  Jupiter's 

Satellites."  12  pages. 
1833:  Schumacher,  H.C.  "Ephemeris  of.. .Lunar  Distances  of  Venus,  Mars, 

Jupiter,  and  Saturn."  44  pages. 

"Geocentric  Places  of  the  Planets."  75  pages. 
1834:  "Report  of  the  Committee  of  the  Astronomical  Society  of  London." 

11  pages. 

1835:  Woolhouse,  W.S.B.  "New  Tables  for... Jupiter's  Satellites..."  39  pages. 

Woolhouse,  W.S.B.  "On  the  Computation  of  an  Ephemeris  of  a  Comet...' 
9  pages. 

"Comparison  of...Burckhardt's  and  Damoiseau's  Lunar  Tables..." 
4  pages. 

1836:  Woolhouse,  W.S.B.  "On  Eclipses."  96  pages. 

1837:  Airy.  G.B.  "On  the  Calculation  of. ..Perturbations..."  23  pages. 

Woolhouse,  W.S.B.  "On  the  Determination  of  the  Longitude..." 

12  pages, 

1839:  Stratford.  W.S.  "On  the  Elements  of  the  Orbit  of  Halley's  Comet..." 

79  pages. 

1851:  Adams,  J.C.  "On  the  Perturbations  of  Uranus."  29  pages. 

1853-1914:     Each  contains  the  elements  and  ephemerides  of  a  number  (from  4  to 

36)  of  minor  planets. 
1854:  Challis,  J.  "On  the  Correction  of  a  Longitude..."  23  pages. 

1856:  Encke,  J.F.  (trans.  Airy,  G.B.)  "On  a  New  Method  of  Computing  the 

Perturbations  of  Planets."  33  pages. 

Adams,  J.C.  "On  New  Tables  of  the  Moon's  Parallax."  20  pages. 
1862:  "Comparison  of  Moon's  Places  by  Burckhardt's  Tables  with  Similar 

Ones  by  Hansen's  Tables."  2  pages. 
1867:  Breen,  H.  "Corrections... to... the  [Tabulated]  Values  of  the  Moon's... 

Parallax...  183 1-1839."  6  pages. 
1874:  "Predictions  for  the  Transit  of  Venus."  6  pages. 

1881:  Adams,  J.C.  "Continuation  of...  Damoiseau's  Tables  of  Jupiter's  Satel- 

lites." 9  pages. 

1883  1922:  Between  about  1850  and  1900,  a  series  of  "Nautical  Almanac  Circu- 
lars" was  issued,  mostly  giving  details  and  local  predictions  of  total 
eclipses. 

1883-1922:  Newcomb,  S.  "Corrections... to  Hansen's  Tables  of  the  Moon."  [These 
contain  longitude  and  latitude  corrections  only  from  1883  to  1895, 
those  for  right  ascension  and  declination  being  included  also  from 
1896.]  2-4  pages. 

1897:  "Approximate  Places  for  1900.0  of  834  Zodiacal  Stars..."  11  pages. 


688  EXPLANATORY  SUPPLEMENT 

1900:  Downing,  A.M.W.  "Continuation  of. .  .Damoiseau's  Tables  of  Jupiter's 

Satellites."  7  pages. 

1901-1906:  "Corrections  to  the  Apparent  Places... to  Obtain  Apparent  Places 
Corresponding  to  the  Struve-Peters  Constants."  Separate  publica- 
tions, 22  pages. 

1907-1919:     "Calculation  of  a  Lunar  Distance."  2  pages. 

1907-1914:     "Ephemerides  for  Physical  Observations."  30  pages. 

1915:  "Some  Constants  and  Formulae."  4  pages. 

"Heliocentric  [Co-ordinates]  of. ..[Planets]."  68  pages. 

1915:  "Corrections  to...  1532  Stars..."  (Separate  publication,  by  Pulkovo 

Observatory),  308  pages. 

1916:  "Heliocentric  [Co-ordinates].., of  Venus."  82  pages. 

1917:  "Heliocentric  [Co-ordinates]... of  Mars."  82  pages. 

1918:  "Derivation  of  Quantities  Contained  in  the  Nautical  Almanac."  23  pages 

1920:  "Ross's  Corrections  to... Places  of  Mars..."  16  pages. 

1929:  "Coordinates  of  the  Sun  for  1950.0  for  1928  and  1929."  32  pages. 

1931:  Fotheringham,  J.K.  "The  Calendar."  14  pages. 

"Derivation  of  Quantities..."  26  pages. 

"Tables  for  Interpolation... by  the  End-Figure  Process."  32  pages. 
1935:  Fotheringham,  J.K.  "The  Calendar."  17  pages. 

"Interpolation  Tables."  14  pages. 
1936:  "Interpolation  and  Allied  Tables."  (Reprinted  for  separate  sale)  48  pages 

1938:  "The  Prediction  and  Reduction  of  Occultations."  (Separate  publica- 

tion) 50  pages. 

1938:  "The  Total  Solar  Eclipse  of  1940  October  1."  (Typescript)  19  pages. 

1940:  "Heliocentric  Co-ordinates  of  Mercury."  4  pages. 

"Corrections  FK3  -  Eichelberger."  6  pages. 
1941:  "Occultation  Reduction  Elements..."  (Separate  publication  by  Yale 

University  Observatory)  37  pages. 
"Ephemeris  of  Pluto."  2  pages. 

"Improved  Lunar  Ephemeris  1952-1959."  (Separate  publication  as  a 
"Joint  Supplement  to  The  American  Ephemeris  and  The  (British) 
Nautical  Almanac")  435  pages. 


14.62   The  American  Ephemeris 

Appendix  III  of  Volume  VI  of  the  Publications  of  the  U.S.  Naval  Observatory,  Sec- 
ond Series,  contains  a  list  by  William  D.  Horrigan  of  publications  issued  by  the  U.S. 
Naval  Observatory  from  1845  to  1908.  This  lists  the  publications  of  the  Depot  of 
Charts  and  Instruments,  the  annual  volumes  of  the  Washington  Observations,  the 
Publications  "Second  Series,"  appendices  to  the  Washington  Observations,  appen- 
dices to  the  Publications  "Second  Series,"  meteorological  observations,  reports  of 


14  /  RELATED  PUBLICATIONS  qqq 

the  Superintendent,  sailing  directions,  wind  and  current  charts,  specifications  relat- 
ing to  the  new  Naval  Observatory,  mathematical  and  astronomical  tables,  special 
reports,  observations,  circulars,  and  reports  on  the  U.S.  Naval  Astronomical  Ex- 
pedition to  the  Southern  Hemisphere  and  the  publications  of  the  Transit  of  Venus 
Commission. 

Unlike  most  of  the  other  national  ephemerides.  The  American  Ephemeris  was 
never  a  medium  for  the  publication  of  technical  articles.  The  volumes  from  1855  to 
1911,  inclusive,  contained  an  appendix,  but  ordinarily  it  comprised  only  the  miscel- 
laneous tables  regularly  included  every  year,  and  the  list  of  fundamental  constants 
and  tables  used  in  preparing  the  ephemerides.  In  1912,  this  list  was  transferred  to 
the  beginning  of  the  volume,  leaving  the  section  of  miscellaneous  tables  at  the  end, 
and  the  appendix  was  discontinued.  Occasionally,  appendices  containing  various 
ephemerides  have  also  been  added  to  individual  volumes;  but  very  few  technical 
contributions  were  ever  included. 

However,  separate  supplements  to  The  American  Ephemeris  have  been  issued 
from  time  to  time.  Sometimes  these  were  separate  printings  of  material  from  the  ap- 
pendices but  more  often  they  were  in  addition  to  the  contents  of  the  volumes.  Most 
of  them  contain  supplementary  ephemeris  data,  especially  for  total  solar  eclipses, 
but  some  have  also  been  several  important  technical  publications. 

The  appendices  and  supplements  that  are  of  interest  for  their  technical  content, 
other  than  ephemeral  data,  are  listed  in  Section  14.621.  A  list  of  the  supplements 
giving  extended  data  and  large-scale  maps  for  total  solar  eclipses  is  given  in  Sec- 
tion 14.622. 

Prior  to  the  establishment  of  the  series  of  Astronomical  Papers  Prepared  for 
the  Use  of  The  American  Ephemeris  and  Nautical  Almanac  (see  Section  14.2  for 
a  complete  list  of  contents),  the  principal  tables  constructed  for  the  office  were 
printed,  each  as  a  single  publication  (a  list  of  these  is  given  in  Section  14.623);  but 
many  tables  were  prepared  only  in  manuscript. 


14.621  Appendices  and  Supplements  The  following  are  appendices  and  sup- 
plements to  The  American  Ephemeris: 

1855:  Chauvenet's  tables  for  correcting  lunar  distances,  with  directions  for 

using  the  tables,  and  explanation  of  their  construction.  Pages  13-70 
of  the  appendix. 

1857:  Chauvenet's  tables  for  correcting  lunar  distances,  with  directions  for 

using  the  tables,  and  explanation  of  their  construction.  Pages  11-67. 
Chauvenet,  W.  "Improved  Method  of  Finding  the  Error  and  Rate  of 
a  Chronometer  by  Equal  Altitudes."  Pages  69  94. 
Walker,  S.C.  "Logarithms  of  the  LeVerrier  Coefficients  of  the  Pertur- 
bative  Function  of  Planetary  Motion."  Pages  95  -117. 


690 


EXPLANATORY  SUPPLEMENT 


Pages  11-94  of  this  appendix  were  later  reprinted  as  a  separate  publi- 
cation. (Chauvenet,  W.  "New  Method  of  Correcting  Lunar  Distances, 
and  Improved  Method  of  Finding  the  Error  and  Rate  of  a  Chronome- 
ter by  Equal  Altitudes."  1866.) 
1874:  Coffin,  J.H.C.  "Tables  for  Finding  the  Latitude  of  a  Place  by  Altitudes 

of  Polaris."  (Supplement  for  1874  1877). 

This  article,  which  included  the  formulas  from  which  the  tables  were 
calculated,  with  instructions  for  using  the  tables,  and  an  illustrative 
example,  was  also  put  into  the  Appendix  (pages  25-33)  in  The  Amer- 
ican Ephemeris  for  1877,  the  first  volume  in  which  these  tables  were 
given. 

A  similar  supplement  for  the  years  1878-1881,  inclusive,  was  sepa- 
rately printed,  and  was  also  included  in  the  Appendix  in  The  Amer- 
ican Ephemeris  for  each  of  these  years.  In  the  volume  for  1882,  these 
tables  were  replaced  by  a  simple  one-page  table  which  was  retained 
until  it,  in  turn,  was  replaced  by  the  table  that  was  given  throughout 
the  period  1912-1959. 

1895:  Newcomb,  S.  "The  Elements  of  the  Four  Inner  Planets  and  the  Fun- 

damental Constants  of  Astronomy."  (Supplement  for  1897.) 

1945:  "Tables  of  Sunrise,  Sunset,  and  Twilight."  (Supplement  for  1946.) 

1950:  "Ephemeris  of  Pluto." 

1954:  "Improved  Lunar  Ephemeris  1952  1959."  Published  as  a  "Joint  Sup- 

plement to  The  American  Ephemeris  and  The  (British)  Nautical  Al- 
manac." 


14.622  Supplementary  Publications  for  Solar  Eclipses  The  series  of  supplements 
to  The  American  Ephemeris  that  were  published  for  the  occasions  when  total 
eclipses  of  the  Sun  were  visible  in  the  United  States  began  with  a  supplement 
to  the  volume  for  1869.  Prior  to  that,  pamphlets  had  been  issued  for  the  annular 
eclipse  of  1854  May  26  and  the  total  eclipse  of  1860  July  17. 

For  the  total  eclipse  of  1869  August  7,  a  supplement  was  issued  containing 
predicted  data,  and  also  one  containing  suggestions  for  observing  the  eclipse.  In 
1885,  a  publication  containing  reports  of  observations  of  this  eclipse  was  issued  by 
the  Nautical  Almanac  Office. 

Since  the  eclipse  of  1869,  supplements  have  been  published  for  the  total  eclipses 
that  occurred  on  the  following  dates: 


1878  July  29 
1900  May  28 
1918  June  8 
1925  January  24 
1932  August  31 


1936  June  19 
1940  October  1 
1945  July  9 
1947  May  20 
1954  June  30 


14  /  RELATED  PUBLICATIONS 


691 


In  addition,  data  for  two  other  eclipses  were  issued  in  U.S.  Naval  Observatory  Circu- 
lar no.  27  and  U.S  Naval  Observatory  Circular  no.  78.  The  former  gives  information 
on  the  annular  eclipse  of  1951  September  1,  while  the  latter  gives  information  on 
the  total  eclipse  of  1959  October  2. 


14.623   Tables  Prepared  for  The  American  Ephemeris  and  Nautical  Almanac  The 

following  tables  were  printed  by  the  U.S.  Naval  Observatory: 


Schubert,  E. 

Winlock,  J. 
Peirce,  B. 
Schubert,  E. 
Schubert,  E. 
Schubert,  E. 


Hill,  G.W. 
Todd,  D.P. 


"Tables  of  Melpomene."  1860. 

"Almanac  catalogue  of  zodiacal  stars."  1864. 

"Tables  of  Mercury."  1864. 

"Tables  of  the  Moon."  1st  ed.  1853;  2nd  ed.  1865. 
"Tables  of  Eunomia."  1866. 
"Tables  of  Harmonia."  1869. 
"Tables  of  Parthenope."  1871. 

"Tables  to  facilitate  the  reduction  of  places  of  the  fixed  stars."  1st 
ed.  1869;  2nd  ed.  1873. 

"Tables  of  Venus."  1872  (on  title  page;  cover  has  1873). 
"Continuation  of  de  Damoiseau's  tables  of  the  satellites  of  Jupiter 
to  1900."  1876. 


1 4.63   Joint  Supplements  and  Appendices 

1968:  The  1968  editions  of  The  Astronomical  Ephemeris  and  Nautical  Alma- 

nac and  The  American  Ephemeris  and  Nautical  Almanac  contain  The 
Supplement  to  the  A.E.  1968,  "The  Introduction  of  the  IAU  System 
of  Astronomical  Constants."  The  supplement  gives  the  values  for  the 
astronomical  constants,  the  theory  of  t  he  corrections,  and  the  changes 
in  The  Explanatory  Supplement  that  result  from  these  changes. 

1968-1971:  These  editions  of  The  Astronomical  Ephemeris  and  Nautical  Almanac 
and  The  American  Ephemeris  and  Nautical  Almanac  contain  appen- 
dices with  the  formulas  and  corrections  for  conversions  to  the  IAU 
system  of  astronomical  constants.  The  ephemerides  in  the  volume 
were  not  based  on  the  new  constants,  so  the  appendices  were  neces- 
sary to  give  the  corrections  for  the  ephemerides  to  be  on  the  system 
of  constants. 

1984:  The  1984  edition  of  The  Astronomical  Almanac  contains  Supplement 

to  the  Astronomical  Almanac  1984,  "The  Introduction  of  the  Im- 
proved IAU  System  of  Astronomical  Constants,  Time  Scales  and 
Reference  Frame  into  The  Astronomical  Almanac."  This  supplement 
gives  the  various  resolutions  involved  and  the  resulting  equations  that 


EXPLANATORY  SUPPLEMENT 


introduce  the  IAU  (1976)  System  of  Constants,  the  FK5  reference 
frame  on  J2000.0,  and  the  TDT  and  TDB  time  systems. 


CHAPTER 


Reference  Data 


Table  15.1 

Fundamental  Constants  (1986  Recommended  Values) 


General  Constants 

Quantity  Symbol  Value  Units  Relative 

uncertainty  (ppm) 


Universal  Constants 


speed  of  light 

C 

299792458 

ms_1 

(exact) 

permeability  of  vacuum 

Wl 

4ttx  1Cr7 

NA-2 

12.566370614... 

10-7NA-2 

(exact) 

permittivity  of  vacuum,  1  /  tigC2 

«S 

8.854187817... 

10-l£Fm-1 

(exact) 

Newtonian  constant  of  gravitation 

G 

6.67259  (85) 

10-11m3kg-1s-2 

128 

Planck  constant 

h 

6.6260755  (40) 

10-34Js 

0.60 

in  electron  volts,  h  I  {e} 

4.1356692  (12) 

10-1sJs 

0.60 

hlZ-K 

h 

1 .05457266  (63) 

10"34Js 

0.60 

in  electron  volts,  h  I  {e} 

6.5821220  (20) 

10"16Js 

0.60 

Planck  mass,  (he!  G)iiz 

ITtp 

2.17671  (14) 

10-flkg 

64 

Planck  length,  h  1  mpc 

lp 

1.61605(10) 

10-36m 

64 

Planck  time,  lp  1  c 

tp 

5.39056  (34) 

10"44s 

64 

Electromagnetic  Constants 

elementary  charge 

e 

1.60217733  (49) 

10"19C 

0.30 

mfb 

2.41798836  (72) 

1014AJ"1 

0.30 

magnetic  flux  quantum,  h  1 2e 

$ 

2.06783461  (61) 

10- 15  Wb 

0.30 

2ei  h 

4.8359767  (14) 

1014HzV-1 

0.30 

quantized  Hall  conductance, 

2a  1  fj,0c 

3.87404613  (17) 

10-5AV-1 

0.045 

7ab/e  15. 1  is  continued  on  next  page. 


693 


694 


EXPLANATORY  SUPPLEMENT 


Table  15.1,  continued 

Fundamental  Constants  (1986  Recommended  Values) 


Quantity 

Symbol 

Value 

1  1  nit  o 

unns 

ntJidLivt; 
iir\i^£irt',3inliii/  { rvnm\ 

unoertciiiuy  i^jjpni/ 

DOnf  rndyricL'tJifi  at><  *-j"t? 

MS 

9.2740154  (31) 

10-24JT-1 

0.34 

If!   8l6Cu0n  VUH£>,  /IfJ  f  \P/ 

5.78838263  (52) 

10~5 eVT-1 

0.089 

in  nercz,  ^b  /  " 

1.39962418  (42) 

1010HzT"1 

0.30 

in  kelvins,  ^b  /  ^ 

0.6717099  (57) 

KT-1 

8.4 

in  wavenumbers,  mb^c 

46.686437  (14) 

m-'T-1 

0.30 

nuclear  magneton,  e/i  /  2mp 

M/V 

5.0507866  (17) 

10"27JT-1 

0.34 

in  electron  volts,  /i^/  {e} 

3.15245166  (28) 

eVT-1 

0.089 

in  hertz,  fin  I  h 

7.6225914(23) 

MHzT-1 

0.30 

in  wavenumbers,      1  he 

2.54262281  (77) 

10-2m  1T" 

1  0.30 

in  kelvins,  m/v  '  * 

3.658246  (31) 

10-4  KT"1 

8.4 

Atomic  Constants 

fine-structure  constant 

a 

7.29735308  (33) 

1Q-3 

0.045 

a  1 

137.0359895  (61) 

0.045 

nyvjuci  y  i^tji  laLdi  il 

ft. 

10973731.534  (13) 

m-1 

0.0012 

3.2898419499  (39) 

1015  Hz 

0  0012 

ft»fjc 

2.1798741  (13) 

10-1fl  J 

0.60 

in  eV,  Rmhci  {e} 

13.6056981  (40) 

eV 

0.30 

DUI  II   1  aulUo,  u  /   +  it.-. 

ao 

0,529177249  (24) 

10_10m 

0.045 

Hartrpp  pnprnu       /  A-xfnPin 

Eh 

4.3597482  (26) 

aJ 

0.60 

—  in  eV  Eh  /  \e\ 

27.2113961  (81) 

eV 

0.30 

nnantiim  of  rim  itatinn 

3.63694807  (33) 

10_4m2s-1 

0.089 

muon  moiar  mass 

M(ii) 

1,13428913  (17) 

10-4kg/mol 

0.15 

muon  magnetic  moment 

Mm 

4.4904514  (15) 

10-26  JT"' 

0.33 

fn  Bohr  magnetons, 

Mm  '  MB 

4.84197097(71) 

10-3 

0.15 

in  niir*lp.ar  mannfltnnc 
111  1  IUOICjo.!  1 1  ld.yi  ItrlvJI  lt>, 

Mm'M/V 

8.8905981  (13) 

0.15 

mimn  mannptir  rnrvrnipnf  aininmalv 

y^(eh  i  2m^)  —  1 

a„ 

0.001165923  (84) 

7.2 

miion  nf-faptrir  P(1  -u  a  1 

2.002331846(17) 

0.085 

muon -proton  magnetic 

moment  ratio 

Mm  'Mp 

3.18334547  (47) 

0.15 

Droton  mass 

/Dp 

1.6726231  (10) 

10-27  kg 

0.59 

1.007276470(12) 

u 

0.012 

In  electronvolts,  nripC2  /  {e} 

938.27231  (28) 

MeV 

0.30 

proton-electron  mass  ratio 

mp  /  me 

1836.152701  (37) 

0.020 

proton-muon  mass  ratio 

nip  /  m,, 

8.8802444(13) 

0.15 

proton  specific  charge 

e/  mp 

95788309  (29) 

C/kg 

0,30 

proton  molar  mass 

M(P) 

1.007276470  (12) 

10~3kg/mol 

0.012 

15  /  REFERENCE  DATA 


695 


Table  15.1,  continued 

Fundamental  Constants  (1986  Recommended  Values) 


Quantity  Symbol  Value  Units  Relative 

uncertainty  (ppm 


proton  Compton  wavelength, 

A  c,p 

1.32141002  (12) 

10-,5m 

0.089 

\c.p  1 2ir 

2.10308937(19) 

10-16m 

0.089 

proton  magnetic  moment 

Mp 

1.41060761  (47) 

10-26  JT-1 

0.34 

in  Bohr  magnetons, 

MpMB 

1.521032202  (15) 

10"3 

0.010 

in  nuclear  magnetons, 

fJ.pl  UN 

2.792847386  (36) 

0.013 

diamagnetic  shielding 

correction  for  protons 

in  pure  water, 

10-6 

spherical  sample,  25°C 

25.689  (15) 

shielded  proton  moment 

(H20.  sph.,  25°C) 

1.41057314(47) 

10-26  JT-1 

0.34 

in  Bohr  magnetons, 

Hp'  MS 

1.520993129  (17) 

10-3 

0.011 

in  nuclear  magnetons, 

Mp  f  MN 

2.792847386  (63) 

0.022 

proton  gyromagnetic  ratio 

fp 

267522128  (81) 

0.30 

Physico-Chemical  Constants 

Avogadro  constant 

6.0221367  (36) 

1023  mol-1 

0.59 

atomic  (unified)  mass  unit, 

atomic  mass  constant 

1u  =  wu  =  1  /  12m(12C) 

ftlu 

1.6605402  (10) 

10"27kg 

0,59 

in  electron  volts,  rtiuC2  /  {e} 

931.49432  (28) 

MeV 

0.30 

Faraday  constant 

F 

96485.309  (29) 

Cmor1 

0.30 

molar  Planck  constant 

NAh 

3.99031323  (36) 

10-10  Jsmol-1 

0.089 

NAhc 

0.11962658(11) 

Jm  mol-1 

0.089 

gas  constant 

R 

8.314510  (70) 

J  mol-1  K-1 

8.4 

Boltzmann  constant,  R  /  WA 

k 

1.380658  (12) 

10-23  JK-1 

8.4 

in  electron  volts, 

k/{e} 

8.617384  (72) 

10-s  eV/K 

8.5 

{e}/  k 

11604.45  (10) 

K/eV 

8.5 

molar  volume  (idea!  gas) 

8.4 

f  =  273?15K;p=  101325  Pa 

vm 

22.41410(19) 

Umol 

Loschmidt  number,  WA  /  v"m 

no 

2.686773  (23) 

1025m^3 

8.4 

T  =  273°15K;  p=  100kPa 

Vm 

22.71108  (19) 

Lymol 

8.4 

Loschmidt  number,  WA  /  Vm 

no 

2.651629  (22) 

lO2^"3 

8.4 

Stefan-Boltzmann  constant 

a 

5.67051  (19) 

10-8  Wm-aK~4 

34. 

first  radiation  constant,  2-trhc2 

Cl 

3.7417749  (22) 

10-16  Wm2 

0.60 

second  radiation  constant,  he  I  k 

C2 

0.01438769  (12) 

mK 

8.4 

Wein  displacement  law  constant. 

b=  AmaxT=  C2/4.96511423  . 

b 

2.897756  (24) 

10-3mK 

8.4 

Note:  The  digits  in  parentheses  are  the  one  standard-deviation  uncertainty  in  the  last  digits  of  the  given  vaiue. 


696 


EXPLANATORY  SUPPLEMENT 


Table  15.2 

IAU  (1976)  System  of  Astronomical  Constants 

Units:   •  The  units  meter  (m),  kilogram  (kg),  and  second  (s)  are  the  units  of  length,  mass,  and  time 
in  the  International  System  of  Units  (SI). 

•  The  astronomical  unit  of  time  is  a  time  interval  of  one  day  (D)  of  86400  seconds.  An  interval 
of  36525  days  is  one  Julian  century. 

•  The  astronomical  unit  of  mass  is  the  mass  of  the  Sun  (S). 

•  The  astronomical  unit  of  length  is  that  length  (A)  for  which  the  Gaussion  gravitational  constant 
(k)  takes  the  value  0.017202098  95  when  the  units  of  measurement  are  the  astronomical 
units  of  length,  mass,  and  time.  The  dimensions  of  k2  are  those  of  the  constant  of  gravitation 
(G),  i.e.,  L3M~1  T~2.  The  term  "unit  distance"  is  also  used  for  the  length  A. 

•  In  the  preparation  of  the  ephemerides  and  the  fitting  of  the  ephemerides  to  all  the  obser- 
vational data  available,  it  was  necessary  to  modify  some  of  the  constants  and  planetary 
masses.  The  modified  values  of  the  constants  are  indicated  in  brackets  following  the  (1976) 
System  values. 


Defining  constants: 

1 .  Gaussian  gravitational  constant 

2.  Speed  of  light 

Primary  constants: 

3.  Light-time  for  unit  distance 

4.  Equatorial  radius  for  Earth 
IUGG  value 

5.  Dynamical  form-factor  for  Earth 

6.  Geocentric  gravitational  constant 

7.  Constant  of  gravitation 

8.  Ratio  of  mass  of  Moon  to  that  of  Earth 

9.  General  precession  in  longitude,  per 

Julian  century,  at  standard  epoch 
J2000.0 

1 0.  Obliquity  of  the  ecliptic,  at  standard  epoch 

J2000.0 

Derived  constants: 

11.  Constant  of  nutation,  at  standard  epoch 

J2000.0 

12.  Unit  distance 

13.  Soiar  parallax 

14.  Constant  of  aberration,  for  standard 

epoch  J2000.0 

1 5.  Flattening  factor  for  the  Earth 

16.  Heliocentric  gravitational  constant 


fc  =  0.01 720209895 
c=299792458  ms"1 

ta=  499.004782  s 

[499.00478370...] 
ae  =63781 40  m 
ae=  63781 36  m 
J2=  0.001 082626 
G£=3.  986005  x  1014m3s-2 
[3.98600448  ...  x  1014] 
G  =  6.672  x  10" 11  m3  kg"1  S"2 

[6. 67259  x  10"11] 
H  =  0.0 1230002 

[0.012300034] 
p  =  5029:'0966 


e=  23° 26' 21  "448  [23°  26'2i:'4119] 


W  =  9"2025 

Cta  =  4=1. 49597870  x  1011  m 
[1.4959787066  x  1011] 
arcsin  (ae  /  A)  =  ?r0  =8?7941 48 
[8.794144] 
k  =  20'.'49552 

/  =  0.00335281 
=  1  /  298. 257 
A3k2  I  D2  =  GS=1. 32712438  x  1020  m3  S"2 
[1.32712440  ...  x  1020] 


15  /  REFERENCE  DATA 


697 


Table  15.2,  continued 

IAU  (1976)  System  of  Astronomical  Constants 


1 7.     Ratio  of  mass  of  Sun  to  that  of  the  Earth 


18. 

19. 
20. 


Ratio  of  mass  of  Sun  to  that  of 
Earth  +  Moon 
Mass  of  the  Sun 
System  of  planetary  masses 

Ratios  of  mass  of  Sun  to  masses  of  the  planets 


{GS)I{GE)  =  SIE  =  332946.0 

[332946.038...] 
(SlE)l{\  +/1)=  328900.  5 
[328900.55] 
(GS)/  G=  5=1.9891  x  1030kg 


Mercury 
Venus 

Earth  +  Moon 
Mars 


6023600 
408523.5 
328900.5  [0.55] 
3098710 


Jupiter 

Saturn 

Uranus 

Neptune 

Pluto 


1047.355 

3498.5 

22869 

19314 

3000000 


[1047.350] 

[3498.0] 

[22960] 

[130000000] 


Other  Quantities  for  Use  in  the  Preparation  of  Ephemerides 

It  is  recommended  that  the  values  given  in  the  following  list  should  normally  be  used  in  the  nreDaration 
of  new  ephemerides.  H  K 

21 .     Masses  of  minor  planets 

Minor  pfanel     Mass  in  solar  mass 


22. 


(1)  Ceres 

(2)  Pallas 
(4)  Vesta 

Masses  of  satellites 


5.9  x  10-10 

1.1  x  10-10  [1.0814x  10" 

1.2  x10-10  [1.3787x10" 


23. 


24. 


Planet 

Satellite 

Satellite/Planet 

Jupiter 

lo 

4.70x  10-5 

Europa 

2.56x  10^5 

Ganymede 

7.84  x  10-5 

Callisto 

5.6  x10-5 

Saturn 

Titan 

2.41  x  10-4 

Neptune 

Triton 

2  x  10~3 

Equatorial  radii  in  km 

Mercury 

2439 

Jupiter  71398 

Pluto  2500 

Venus 

6052 

Saturn  60000 

Earth 

6378.140 

Uranus  25400 

Moon     1 738 

Mars 

3397.2 

Neptune  24300 

Sun  696000 

Gravity  fields  of  planets 

Planet 

J2 

Ja 

Earth 

+0.00108263     -0.254  x  1Q-5 

-0.161  x10"5 

Mars 

+0.001964 

+0.36x  10-4 

Jupiter 

+0.01475 

-0.58  x  10"3 

Saturn 

+0.01645 

-0. 10  x  10"2 

Uranus 

+0.012 

Neptune 

+0.004 

(Mars:  C22 

=  -0.000055,       =  +0.000031,  S^  =  +0.000026) 

25. 


Gravity  field  of  the  Moon 

7  =  (S- A)/ C  =  0.0002278  C/AOT^O.392 
0=(C  -  A)!  6  =  0.0006313  /  =  5552"7  =  1°32'32:'7 

C20  =  -  0. 0002027     C30  =  -  0.  000006     C32  =  +0. 0000048 
=  +0. 0000223      Cg,  =  +0. 000029      S32  =  +0. 000001 7 
§3,  =  +0.  000004      C33  =  +0.  000001 8 
S33  =  -0.000001 


698 


EXPLANATORY  SUPPLEMENT 


Table  15.3 

Time  and  Standard  Epochs 


1  day  =  24  hours  =  1440  minutes  =  86400  seconds 

1  Julian  year  =  365.25  days  =  8766  hours  =  525960  minutes  =  31557600  seconds 


Length  of  the  Year  at  1990 


d 

d 

h 

m 

s 

Tropical  (equinox  to  equinox) 

365.2421897 

365 

05 

48 

45.19 

Sidereal  (fixed  star  to  fixed  star) 

365.25636 

365 

06 

09 

10 

Anomalistic  (perihelion  to  perihelion) 

365.25964 

365 

06 

13 

53 

Eclipse  (Moon's  node  to  Moon's  node) 

346.62005 

346 

14 

52 

52 

Gaussian  (Kepler's  law  for  a  =  1) 

365.25690 

365 

06 

09 

56 

Julian 

365.25 

365 

06 

00 

00 

Length  of  the  Month 


d 

d 

h 

m 

s 

Synodic  (new  moon  to  new  moon) 

29.53059 

29 

12 

44 

03 

Tropical  (equinox  to  equinox) 

27.32158 

27 

07 

43 

05 

Sidereal  (fixed  star  to  fixed  star) 

27.32166 

27 

07 

43 

12 

Anomalistic  (perigee  to  perigee) 

27.55455 

27 

13 

18 

33 

Draconic  (node  to  node) 

27.21222 

27 

05 

05 

36 

Length  of  the  Day 

1d  of  mean  solar  time        =  1  ?00273790935  of  mean  sidereal  time 
_  24h03m56?555368  of  mean  sidereal  time 
=  86636.555368  mean  sidereal  seconds 

1"  of  mean  sidereal  time    s  0^99726956633  of  mean  solar  time 
=  23h56m04f  09054  of  mean  solar  time 
=  86164.09054  mean  solar  seconds 


15  /  REFERENCE  DATA 


699 


Table  15.3,  continued 

Time  and  Standard  Epochs 


Standard  Epochs 


Julian  Year  epochs 


J.Y. 

Julian  date 

J  1900.0 

2415020.0 

J  1950.0 

2433282.5 

J  2000.0 

2451545.0 

J  2050.0 

2469807.5 

J  21 00.0 

2488070.0 

1900 

January  0.5  = 

JD  2415020.0 

1925 

January  0.5  = 

JD  2424151.0 

1950 

January  0.5  a 

JD  2433282.0 

2000 

January  0.5  = 

JD  2451544.0 

2050 

January  0.5  = 

JD  2469807.0 

2100 

January  0.5  = 

JD  2488069.0 

Beginning  of 

Besselian  year 

B.Y. 

Julian  Date 

B.Y.         Julian  Date 

B1 850,0 

2396758.203 

B2000.0  2451544.533 

B1 900.0 

2415020.313 

B2025.0  2460675.588 

B1 950.0 

2433282.423 

B2050.0  2469806.643 

B  1975.0 

2442413.478 

B2100.0  2488068.753 

Table  15.4 

Sun,  Earth,  and  Moon 


IAU  System 


Best  Estimate 


Sun 


Radius 

Semidiameter  at  mean  distance 
Mass 

Mean  density 
Surface  gravity 

Inclination  of  solar  equator  to 
ecliptic 

Longitude  of  ascending  node  (7"  in 
centuries  from  J2000.0) 

Period  of  synodic  rotation  (<j>  = 
latitude) 

Period  of  sidereal  rotation  adopted 

for  heliographic  longitudes 
Motion  relative  to  near  stars 


6.96  x  108m 
15'59:'63  =  959:'63 
1.9891  x  1030kg 
1.41  gem-3 

2.74  x  K^ms-2  =  27.9g 
7°  15' 

75°  46'  +84'  T 

26. 90  +  5.  2  sin2  <p  days 

25.38  days 


apex:  q  =  271  °  8  =  +30° 
speed:  1 .  94  x  1 04  m/s  =  0 


Figure  and  Gravity  Field  of  the  Earth 


Equatorial  radius 

Dynamical  form  factor  for  Earth 

Flattening 

Polar  radius 

Mass  of  the  Earth 

Mean  density 

Normal  gravity  (g) 

Geocentric  gravitational  constant 


2.8x  10" 


a  =  6378140  m  6378136  m 

jfe  =  0. 001 08263  0. 001 082626  ■ 
/  =  1  /  298. 257 

b  =  6356755  m  6356752  m 

5. 9742  x  1 024  kg  5 . 9742  x  1 024  kg 

5.52  g/cm3 

9.80621  -  0.02593  cos  2<p  +  0.00003  cos  4^  m/s2 

3. 986005  x  1014m3s_a  3.98600440  x  1014m3s-2 


1°  of  latitude 
1 0  of  longitude 
Geodetic  latitude  (<f>) 
latitude  (</>') 


For  a  point  on  the  spheroid  of  the  IAU  System  at  geodetic  latitude  (<j>): 

110.575  +  1.110sin2<f.km 
{111. 320  +  0. 373  sin2  <j>)  cos  <j>  km 
692:74  sin  2<p  -  1  "1 6  sin  4<£ 


geocentric 


Solar  parallax 

Constant  of  aberration  (J2000.0) 
Light-time  for  1  au 
1  astronomical  unit  of  length 
Mass  ratio — Sun/Earth 

Sun/Earth  +  Moon 

Moon/Earth 
Mean  eccentricity 
Mean  obliquity  of  the  ecliptic 
Annual  rate  of  rotation  on  the 
ecliptic 

Mean  distance  of  Earth  from  Sun 

Mean  orbital  speed 

Mean  centripetal  acceleration 


Orbit  of  the  Earth 

8'.794148 

20'.'49552 

499.004782  s 

1.49597870  x  101,m 

332946.0 

328900.5 

0.0123002 

0.016708617 

23°26'21°448 

0:'4704 

1.000001 01 78  AU 
29.7859  km/s 
0.00594  ms-a 


8:794144 

499.00478353  s 
1.4959787066  x  1011m 
332946.045 
328900.55 
0.012300034 

23°26'21:4119 


1.000001 05726665  AU 
29.784766966  km/s 
5.9301134387  x  10"3ms 


15  /  REFERENCE  DATA 


Table  15.4,  continued 

Sun,  Earth,  and  Moon 


IAU  System 


Best  Estimate 


Orbit  of  Moon  about  the  Earth 


Sidereal  mean  motion  of  Moon 
Mean  distance  of  Moon  from  Earth 


Equatorial  horizontal  parallax 

at  mean  distance 
Mean  distance  of  center  of  Earth 

from  Earth-Moon  ban/center 
Mean  eccentricity 
Mean  inclination  to  ecliptic 
Mean  inclination  to  lunar  equator 
Limits  of  geocentric  declination 
Saros  =  223  lunations  =  19  passages  of  Sun  through  node  =  6585  1/3  days 
Period  of  revolution  of  node  6793d 
Period  of  revolution  of  perigee  3232s 
Mean  orbital  speed  1023  ms-1  =  0.000591  Au/d 

Mean  centripetal  acceleration  0.00272  ms~2  =  0. 0003  g 


2.661699489  x  10-6rads-1 
3.844  x  105km 
60.27  Earth  radii 
0.002570  AU 
57'02'.'608 
3422'.'608 

4.671  x  103km 
0.05490 
5°  145396 
6°41' 
±  29° 


Period  with  respect  to  fixed  stars 
in  mean  sidereal  time 
in  mean  solar  time 

Rate  of  rotation 


Rotation  of  the  Earth 

24h00",00s0084 
23h56m04f0989 
15'.'04106717866910s-1 
7.29211510  x  10-5rads-' 


Annual  rates  of  precession  (T  in 
centuries  from  J2000.0) 
general  precession  in  longitude 
lunisolar  precession  in  longitude 
planetary  precession 


Mean  radius 

Semi-diameter  at  mean  distance 
Mass 

Mean  density 
Surface  gravity 


50:290966  +  0:0222226  T 
50'.'387784  +  0:0049263  7" 
-0.0188623  -  0:0476128  T 

Moon 

1738  km 

15'32:'6 

7. 3483  x  lO^kg 
3.34  gem-3 
1.62ms-2  =  0.1 7g 


702 


EXPLANATORY  SUPPLEMENT 


15  /  REFERENCE  DATA 


703 


o>  t:  to 
>  CO  P 
.  lli  ^ 
ra^:  i 
S  o  o 


o  o 


■o 

£ 

Q. 

co 

0) 

o 
c 

0) 


0)  — 

DC 


75  cm 

-  (0 

c  " 
(0  E 

§  ° 


o     lj  — 

■5    Q-  1 


E 
B 
I 


a? 

CD 

Mi  cr 
ui  o 

5  a 


o 

3  1 

cr  ™ 
LU  DC 


in 

i  e 


0) 

Q 

C 

co 
m 
E 


CO 

w  1 

^  1 

i! 

CM 

CM 

Cvl 

CJ> 

cn 

cn 

CM 

cvl 

CM 

1^ 

CO 

CO 

CD 

CD 

C\J 

OJ 

CM 

CM 

CO 

CO 

co 

CO 

O 

o 

o 

o 

5 

5 

o 

o 

o 

o 

o 

o 

d 

d 

d 

d 

II  Mill 


in 

co 

1 

o 

o 

1 

'CO 

1 

CO 

1 

1 

1 

1 

1 

1 

o 

5 

o 

o 

5 

o 

CD 

cc 

CO 

CO 

CO 

CO 

as 

s 

CD 

CD- 

co 

■CO 

CO 

CO 

CM 

f- 

CO 

CO 

CM 

CD 

Gj 

CO 

CM 

CO 

CO 

5 

r- 

CCD 

r- 

s 

r- 

r- 

CD 

CO 

CM 

LO 

LO 

uo 

LO 

■=3- 

CO 

CO 

CD 

r- 

LO 

o 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CO 

CD 

O0 

CO 

CO 

CO 

03 

00 

00 

CO 

00 

CO 

f^- 

CO 

■* 

CD 

d 

CD 

CO 

CD 

CD 

CD 

CD 

CD 

CD 

cn 

CS 

cn 

CD 

CD 

o 

CD 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CM 

CO 

CM 

LO 

LO 

LO 

CO 

LO 

CD 

CO 

CO 

r- 

r- 

O 

o 

O 

O 

O 

CO 

CO 

ai 

CD 

CO 

CO 

CO 

m 

CO 

CD 

CO 

CO 

& 

CO 

O 

CD 

r- 

(0 

CM 

CO 

CM 

CM 

CO 

CM 

LO 

CO 

CO 

CO 

CO 

5 

CO 

CO 

CC' 

CO 

co 

CO 

r- 

S 

o 

CO 

s 

— '  CD 
° 

co  en 
O  < 


LO 

CD 

O)  j-^  CD 
CO  ^  *~ 

i  s « 
§5 1 

O   (TJ  CO 


—  "5 


i 


CD 

E  ~ 

<  r»-  _ 

co  co  cn 

S  »  § 

o  0-  =! 

C/>  O  < 


3 

<  * 


2  o> 


_  o 

(0  s-  o  co  *;  co 

c  £  a  eg  5  co 

o  >i  co  co  co  t—  o 

3g  co  »-  ^  co 

<3  X  cu  o  oi  £  » 

a      «  S  $  ^  £■ 

O  O  CD  LU  < 


■p 
01 
3 
c 

+- 
c 

o 
u 

in 

LO 


XI 

t— 


g 
1 


S 


CO 
CO 

CO 
CM 

T 

CO  CO 
CO 

LO 

00  r-. 

9 

1 

O 

T 

LO  CM 

^  1 

CO 

1 

CM  CM 
CM  t^- 
1  m 

1  I 


•tf  CM  (O  rt  CO 


CM        CO  CO  T- 


0 

CD 

CO 

T 

CO 

in 

LO 

CD 

CO 

h- 

iO 

LO 

10 

q 

in 

OJ 

CO 

CM 

CD 

■A 

w 

UO 

CM 

CO 

LO 

CO 

CO 

h- 

S3 

s 

CM 

IO 

5 

LO 

5 

CD 

CO 

CM 

n 

CM 

03 

10 

cn 

LO 

to 

CM 

5 

LO 

LO 

CM 

T 

CO 

CO 

LO 

cv 

^« 

cn 

O 

CM 

OC 

CD 

CO 

CM 

10 

OJ 

CO 

LO 

OJ 

LO 

LO 

CO 

I  I 


o 
E 


IB 


a 


0! 


a 


ctj 

O  E 


c'|^    8    g  m 

0>nia>CB:V,G):cjicc 


cn 
cvj  co 


_  o 

CO  CO  CO 

CO  CD 

—  CO 


"  .3  10  -S  I  -  n  s  - 


< 


™  2  g  JS  "  E 

LliU<£CQ!i:COiIJ 


-  n  I  <» 


z  < 


(0 

w  o 

,,,        01  (J) 

5  o  ^  5  1: 

^  .9  o  3  o 
O  o_  a  0.  to 


i 

O 
O 

o 


g 

0 

T3 


0)  C3 

■a  S 

C3  CO 


^_  *£    nl  ^  rr  CO 


w  o  =  : 

CD    CO    »  ; 

11  no 


O  a1  d'<5>-6-";e- 


EXPLANATORY 


Table  15.6 

planets:  Mean  Elements 

(For  epoch  J2000.0  =  JD2451 545.0  =  2000  January  1.5) 


Planet 

Inclination  (/') 

Eccentricity  (e) 

Mercury 

7°nn'  1  yqso^i 

0.2056317524914 

Venus 

3°23'40"Q7828 

0.0067718819142 

Earth 

0.0 

0.0167086171540 

Mars 

1  °  EfV  RQT11  RT? 

Jupiter 

1°18' 11:77079 

0.0484948512199 

Saturn 

2°29' 19196115 

0.0555086217172 

Uranus 

0°46' 23:50621 

0.0462958985125 

Neptune 

1°46' 11:82795 

0.0089880948652 

Pluto 

17°08'31:8 

0.249050 

Mean  Longitude 

Mean  Longitude      Mean  Longitude 

of  Node  (f?) 

of  Perihelion  fro)        at  Epoch  (L) 



Mercury 

*ttj     1  J  D  1  1 

77°  27'  22'.'02855     252°  1 5'  03:25985 

Venus 

76°  40' 47:71 268 

1 31  0  33'  49'.'34607      1 81 c  58'  47:28304 

Earth 

0.0 

102°  56' 14:45310  100°27'59:21464 

Mars 

49°  33'  29: 13554 

336°  03'  36'.'84233      355°  25'  59:78866 

Jupiter 

100°27'51:'98631 

14°  19'  52'.'71326  34°21'05:34211 

Saturn 

11 3°  39' 55:88533 

93°03  24"43421        50°  04' 38:89695 

Uranus 

74°00'21:41002 

173°00'18US7320     31 4°  03' 18:01840 

Neptune 

131°47' 02:60528 

48°07'25-28581      304°  20' 55: 19574 

Pluto 

110°17'49r7 

224°  08' 05:5  238°44'38r2 

Mean  Distance  (au) 

Mean  Distance  (1Q11  m) 

Msrcury 

0.3870983098 

0.579090830 

Venus 

0.7233298200 

1 .08208601 

Earth 

1.0000010178 

1 ,49598023 

Mars 

1.5236793419 

2,27939186 

Jupiter 

5.2026031913 

7.78298361 

Saturn 

9.5549095957 

14,29394133 

Uranus 

19.2184460618 

28.75038615 

Neptune 

30,1103868694 

45.04449769 

Pluto 

39.544674 

59.157990 

Sidereal  Synodic        Mean  Daily  Orbital 

Period  (Julian  years)     Period  (d)       Motion  (n)       Velocity  (km/s) 

o 


Mercury 

0.24084445 

1 15.8775 

4? 09237706 

47.8725 

Venus 

0.61518257 

583.9214 

1°60216874 

35.0214 

Earth 

0.99997862 

0? 98564736 

29.7859 

Mars 

1.88071105 

779.9361 

0° 52407 109 

24.1309 

Jupiter 

1 1 .85652502 

398.8840 

0° 0831 2944 

13.0697 

Saturn 

29.42351935 

378.0919 

0° 03349791 

9.6724 

Uranus 

83.74740682 

369.6560 

0? 01 176904 

6.8352 

Neptune 

163.7232045 

367.4867 

0? 006020076 

5.4778 

Pluto 

248.0208 

366.7207 

0? 003973966 

4.7490 

Note:  The  elements  for  Pluto  are  based  on  a  tit  over  one  century.  Trie  values  for  the  other 
planets  are  based  on  an  evaluation  of  the  expressions  for  the  mean  elements  evaluated  at 
the  epoch. 


Table  15.7 

Planets:  Rotational  Data 
(North  Pole  of  Rotation  and  the  Prime  Meridian) 


Sun 

ao 

=  286.°  13 

*o 

=  63°87 

W 

=  84°10 

+ 1 4? 1 844000 d 

Mercury 

ao 

=  281.01 

-0.003  7" 

*o 

=  61 . 45 

-  0. 005  r 

W 

=  329.  71 

+  6.1385025  d* 

Venus 

a0 

=  272. 72 

60 

=  67.15 

W 

=  160.26 

-  1.481 3596 d 

Earth 

a0 

=  0,00 

-0.641  T 

60 

=  90. 00 

-0.557T 

W 

=  190,16 

+  360. 9856235  d* 

Mars 

ao 

=  317.681 

0.108  7 

60 

=  52.886 

-  0. 061  7 

W 

=  1 76. 868  +  350.  89 1 9830  d* 

Jupiter 

a0 

=  268.  05 

-  0. 009  T 

60 

=  64. 49 

+  0. 003  7 

w 

=  284. 95 

+  870.5360000  d§ 

Saturn 

"0 

=  40. 58 

-  0. 036  7 

*0 

=  83.  54 

-  0. 004  7 

W 

=  38.  90 

+  810.7939024  d§ 

Uranus 

=  257. 43 

bo 

=  -15.10 

=  203. 81 

-501.1600928  S 

rwpiune 

=  299.36 

+  0.70  sin  N 

to-. 

=  43.  46 

-  0.51  cos  N 

W: 

=  253.18 

+  536. 3128492  d- 

N: 

=  359. 28 

+  54. 308  7 

Pluto 

a0  ■■ 

=  313.02 

S0- 

=  9. 09 

W-. 

=  236. 77 

-56. 36231 95  d 

a0,  60      are  standard  equatorial  coordinates  with  equinox  J2000  at  epoch  J2000.  Approximate  coordinates  of 

the  north  pole  of  the  invariable  plane  are  «0  =  273°85,  b0  =  66?99. 
W  =      location  of  the  prime  meridian  measured  along  the  planet's  equator  in  an  easterly  direction  with  respect 

to  Ihe  planet's  north  pole  from  the  node  (located  at  right  ascension  90°  +  n0)  of  the  planet's  equator 

on  the  standard  equator.  If  W  increases  with  time,  the  planet  has  direct  rotation  and  if  W  decreases 

with  time,  rotation  is  said  to  be  retrograde, 
f  =      interval  in  Julian  centuries  (of  36525  days)  from  the  standard  epoch, 
d  =      interval  in  days  tram  the  standard  epoch. 

The  standard  epoch  is  2000  January  1.5,  i.e.,  JD  2451545.0  TDB. 

Notes:    *  The  20°  meridian  is  defined  by  the  crater  Hun  Kal. 

*  The  expression  for  W  might  be  in  error  by  as  much  as  0.2  because  of  uncertainty  in  the  length  of  the  UT 
day  and  the  TDT  -  UT  on  2000  January  1 . 

*  The  0°  meridian  ts  defined  by  the  crater  Airy-O. 

5  The  equations  for  W  for  Jupiter,  Saturn,  and  Uranus  refer  to  the  rotation  of  their  magnetic  fields  (System 
III).  On  Jupiter,  System  I  (Wi  =  67?  1  +877° 900  d)  refers  to  the  mean  atmospheric  equatorial  rotation: 
System  II  (IVM  =  43°3  +  870.°270  d)  refers  to  the  mean  atmospheric  rotation  north  of  the  south  component 
of  the  north  equatorial  bell,  and  south  of  the  north  component  of  the  south  equatorial  bell. 


706 


EXPLANATORY  SUPPLEMENT 


15  /  REFERENCE  DATA 


707 


O 

m 
>■ 


ra 

C  s 

a  c 

o  «!  / 

£  , 


Ol 

|  E 

S  I 

ra  cn 


«  E 
fa  S 


ui  E 
b  a 
<  5 


cc  — ' 


E 

I 


111  II 


I  I 


m  rt  t- 

OJ.  m 

tri  io  lo 


5t  . 

ID  CM  | 

d  d 


co  in 
cm  § 


<j!  S  ffi 
2  >  lil 


1  7 


o  <o  m  m 
rj  o)  n  *t 
o  -i-  ^ 


3  £3 

CO  Ol  CO 

co  CO  »- 


O  ID  OJ 
O  O  O 
O  O  O  O 


fa 

N      m  cd 

O  CM  O  O 

o  in  f\l  ui 

6  6  t  (O 


00  S  CM  (D 

co  o  a>  cd 

CO  ^  CO 

1-i  CO  r-  O 

N  CO 


SB 

o  <S 


o  o 


CO  m 

CO  CO 

01  CO 

CO  LO 


C  CO  t 

O    «  =  3 

II  =  » 

e.  2  -5  to 


I  I  I 


la   I    I  III 


O  T-    1-  T- 


o 

CO        -tf  CO 

CD  «*  cm 

h-  <D  Cd 
tD  O) 

id  'j  n  cSj 


CD  CO  t- 

n  w  o 


in  io  irt 

LO  h-  i- 

m  t}-  -i— 

eg  cv 


u>  in 

OJ  CO 

y)  r-  o 


If  I 

3  2  0. 


_  T> 

i  3 


If 


B  3  >; 
E  ST  O 
U  I"  O 


g  0  5 

■    O    CQ  O 


I  I 


t  co 

I 


CO  CO 

m  -* 

CM 

I 


S5 


0j  CO 

13  UJ 


co  cd  co  co 
Tf  m  in 


Q        O  i- 


i  I  i  « 


O  r~ 
OJ i  OJ  c\i 


t—  CM  O  00 

CM  lO  CO 

d  t-  ai  cd 

+  111 


o  o  o  o 


CO  OJ  OJ  CO 

ID  r  r  N 

cd  in  CO  <D 

OJ  CM 


To  jB 

in  >>  (0 

"  & 

CO  "  CO 

(O  Ifl  t  ^ 

co  cd  in  m 

^  «i  n  s 

OJ  CVJ  |f-  CO 

co  o  «<  5 

K  d  O 

CM 


O    10    .IS  3 

o  s  e-  S 


£2 


en  r~ 

t-  co  o 

cd  ^ 

I    I  I 


in  >t 

d  d 


CD  CD 

co  m 

d  o- 
05  cm  co 


as 
Q 


a. 

1 

3 

_C 

ra 

c 

:al 

CO 

ysi' 

cd 

Ph 

T— 

CO 

<D 

jQ 
cn 

Ian 

r-  tL 

co 


Q  re 

"5 


01  Q) 
CO"  ^  J, 


B 
O 

a 
o 


»  £       i  1 


^  x 

cr 


>  £ 

Ft,  Q 


(9  < 


ra  o 

LU 

co  ? 

i  " 

P  C 


10  40  r*> 


E  «  to 
rd  (u  xj 
^  =  c 

"C  ra  o 

<U  JZ  CD 
X  *-  Ui 

'-n  ®  rz 

C  (A  o  W 

:=  ^  O  Q-  O 

T3  K  —  m  O 

ScofS 
™  t3  ° 


O 


10 

a.*  8 


a>      ,s  g  «  ^ 

E 
o 

o 


■  a    a  » 

E  .a  i  |  f 

m  ^  5  in  ° 

a  3  Z  -  £ 
™  £  o  £ 
o  a;  ra  g  jj 

lifts 

r  ^  ^  f»  f 

U    >     CZ  Q_ 

«  S  -2  ^  ffl  h 
c  cn  a  c  x:  m 

£    CD    o    2  ^" 

o>  £  *"  To  d  ^ 
-5  o 


03 

c  « 
ta  ra 

OJ  ^ 

a. 

&  E 

s  8 

ra  S 

CL  — 

S  ™ 


ca  co 
UJ  a 

<•>  I 


^-  ca 


I  1 

-a  cr 

E  o 

°  Jo 

i  ra 

9  E 


to  3 
Q  c 


io 


co  cr 

£  S 

o  e 

co  co 

T3  £ 


ra  i. 
E 


S  1 
ca 

E  « 


£  E 


5  8 
a»  co 


^  >>  c 

«;  sp 

ra  ra  JS  co 

i  *  s  1 


^3  £ 

B  (0 


^  XJ 

is  £  ra 

-  £  £  *  ~  o  * 

-   -  ~  o  °  ^  - 


E 

O  CO 


Ol 

c  c 

'i:  n 


>  t 

co  co  ai 

r  c  r 

l-  j-  h- 

t—  cvi  co 


(—   m  ^  — ; 


"    O  CD  ro 

~  S  & 

S  ra  a 
ra 


^  i9  ^ 
ra  o  co 

0>  0) 


>•  o  o>  o>  a)  cn  ra 


CO  CD 

3  s 

cr  CO 
CO  «- 


nj  Co 
a  io 

■D  CO 


8  s 

ill 

"  R  » 
£  S  <u 
o  ra  J= 

e.e: 

o  p  « 

CJ  '  o 
H  £  D. 


«  o  " 

ST-   m  ^ 


O  (0 


CD 


C.Q.£ 

TJ  2 

E  £  w 


a>  -a  -g 

n  c  co 
J—    CO  CO 


EXPLANATORY  SUPPLEMENT 


nCDEDtOOtDlDtO 

CT3  00  id  ori  c\i  CM  d 
t-  to      tj-  i-  i- 


CO 


in  lo  lo  cd  oj 

Q    C\J    C\J  CP  -i-  LQ 

LO    CD    CJ  O  O  O 

ffl   ifi   S  CO  t- 

co  i- 


I 

O  03 


O  O  O  O  O  N  '3" 


1-  o  ■>-  o  o  o  o 


o  o  o  o  o  o  o 


m  r-- 

g  £ 


i-  f--  co 

NcomNiocoNcn 

cmcocm*-cM'-i-o 


W  O  O  O  O) 

LO  O  CM  O  1— 

_    ^  O  OJ  i-  CD 

CM    O  Q  O  O  CM  O 


ooooooooooooooooo 


o  o 
d  b 


O  O    CP  t- 


00  (O 

CM  OJ 

do  h 

CM  CD  O 

O  T-  O 


o  o  o  o  o  o  a 


CM  OJ   to   o  2  CO 
LOOCQ-tfOOOi-rO 


i-  o  s 

CO  CO  CO  CO 
CO  t—  ^  N 


o  o  o  o  o 

O  O  CM  O  O 


LO  h- 

CO  CO 
CM  CM 


CO  CM 

cm  -r 

CM  CM 


tj-  cm  en  co  lo  cd       r^h-  t- 

05  OJ  CM  CM  CO  CO  CD  CM  CM 
OCMt-i-i-CM   CM   co  lo  cm 


■>-  CM  ■>- 

CD  LO  LO 

m  0)  i- 

CO  CM 


t-  OJ  O  ID  O 


CO  LO  O  *- 


■i—   -i-    CO  CO  CD  ^ 


CO     T-  -& 

CD  CD 

00  CM 

CM  t—  to 

CO  CO  CM 


CD  1- 

C0         CO  LO 

r~~  o      ^  o 

h-  i-  CM  CO  CJ5 

CO  CO  to  f  s 

t-  r-  Ul  O  i-  CM  CO 

CB  t-         O)  CD  (D  OJ 

CO  LO  LO  CO  CD  CO  LO  CM  CM 

NiflT-CfittOCDCCCCCMLlirN 

^rtNcdddo)U5comcAiT-cci 

i-  LOIOCOLOLOOJCOCO 
CM(MSNC\JCDCDCM 


CM 


CO  LO  O 

*T  LO  co 

CO  00  t- 

O    T-  l> 

CD  CO  CM  i- 

lO  CM  N  «  N 

t  CO         (M  O 

h-  oi  en  *t 

CO  CM  CM  CD  CO 


CM  CO 

-t  CO  CO 

■    CO  CO  lO 
03  CM 


S  o 

oi  in 


ID  CD  o 
f0  ^   ^  N  P) 
1X3    Ol  CM  (0 


OOOOi-i-Pd^f 


£  £ 

5  0.  Q 


E  2  £  5 


_  d  of  n 
o  ILi  CD  O 


E  E  « 

<  X  LJJ 


OJ    CD  03 


c  n 
< 


^  CD 


Q  03 


ID  > 


_J  F  < 


£  =  s  a-  £ 


LU   F  Q  X   F  X 


=  __.  =  =  >  ^>  5 


=  =  X   -  =  =  >>> 


=  S£>>>>SX 


CO  ^ 

111  s 


15  /  REFERENCE  DATA 


709 


en  lo 
o  o 
o  o 


CO  CTJ 

CM  CO 

CO  CD  □  ^  CO  LO  O 

cdrtcMVroomoistficocomNT-d  d  cd  i-  co  t-  to 

T-lOT-CMLO^tCMOCMCDCO  CM  LO  CO  CO 

LD^CJCMCMCMCMt'i-  CO  LO  ^  CM  t- 


_  in 

to  7  o  i-'tn  ^■i-Ninom 

co  a  o  nro^^ojt-i-wowrT-nonrtcostyoowLii,- 

6  d  o      o  o  o  o      d  d  o  d  d  d  o  o  o  on  i^^dddddcD 

UD    CM  Cft 


CO 

^  O  CM  CO  N  O   CM  <4 

O  W  ^         COLOCMOCM-^Ot-t-t-t-t-i-t-^O    t-   t-                     -A  ,-  t- 

OOO  OOOOOOi—  OOOOOOOOO  LOOOOOOO  o 
poo  OOOOOOOOOOOOOOOOKOOOOOOO 

odd      ddddddddddddddddddddddd  d 

v  vvvvvvvv 


V    V    V  V 


CM  O  CO  O  CO 

WOCDCDSifiOcOCNJOrWOJNCDNCOCOlDCIl^CprCCl 

^^©u)CnNmqqa)Lr)p)NS\-N(Dcooci)WON  co  to  to  o  o  cm  cd 

i-N^^NaT-rti-tflirictioimricj^oi^cd  ri  s  ri  w  cm  d  cd  cri 

L0NCI)0)OC0^C0CS(0WC0W^iDi0CDC0t0C0l0h-(SLn  t-  t-  N  in  CD  m  't  i- 

t-cocmcmt-t—  t—  1—  t—  cm^lo-t-                                         n  lo  t- 

lo 


LO 


"O 


F)  CM  N  O)  C\J 

or^i-oooicoo>iv.o^(ocDa>LO-cM^-      <o  lo  m  io  m 

^ssscONcoosMocoaimainm  cd  en  co  in  fl-  in  t-  lo 
wocoa)CiOLnooT-ccwTto^«iO(OO^^tncocoT-co^icNmooj 
^cD^^^-ncolno^^^c^Lo^t««wncow^co^O'^'-'TCo■^^l^l^ 

ffiCOCOCOO^CMNCM^OCOT-OSrtcO'NCni-inCMCDN    CO  Ol  i—  CO  CM  LO  CM  CO 

^^■cqo3(oacOlnln^^Tl^^Rn^^^^lotn(D^ffl  t-  cm  co  co      in  t-  cq 

dcM^^ddddcM^cddi-^ddodobbbddio  d  d  d  d  d  d  -<-  to 

*-  CO 

CO 


"5  Q3  R  w 
E  _ 
a.  cd 


w  ™  ra 


a  oi  ?v  *-  *-  iu  co  v.  tz  *-  jj 
LUIFO<Q-Llll<DhO 


cd  ca  ^  _c 


s  S  B S I  S I « I  11 

UOcaOQ^CLCEmQ-F  zz 


F  Q 


s  8  1  § 
55  £  o 


_--_;>>>> 

XXXXXXXX  — 


=  =  2>>>>xx 


_  -  =  >  > 

X  X  X  X  X 


=  ^  >  >  >  >  — 


10 


EXPLANATORY  SUPPLEMENT 


CQ 

I 


00   O    CM   O  iO 

i-  m  in  tq  in 
o  t-  o  o  o 


O  ffl  5 
CO   CJ  CO 

odd 


oooooooo 


I 

EG 


000-»-0   0  0*-QOO 


r*.  h<-  ^  h- 
d  d  d  d 


S  CO  r  CO  CO,  0Q  N  O 

r--  f-v.  k  c\j  h"-;  i>  £> 
dodo  i-  odd 


*t        O  CM   O)  r   in  3; 

s^^qwtqcDi-cq 


co  cn 

^   S   CM   i-  i- 

d  oi  cd  * 


i-  en  m  r  3)  m  tj- 
CMtocd'Xi'tqq^T- 

d-i-oii-^-r^co-^r^ocj 
+  +  +    I    1    1    1    +  + 


fy,    CO  CO    CO  o> 

oniDNcQC\|ino^coni-©coT-c\|cpinK 

*7—     t*~     ^™    t~~     t-     i^—               +  T"~     T~~      ^-      +      ^      +      T       I       "P     T  T" 

+      +      +      +      +      +      +  +  + 


cm  o  in  co  co 
•f  CM  q  p  q 
odd  dodo*  odd 


io  m  in 

o  o  q  q  q 

d  d  d  d  -r^ 


OlNSWCOrvjOCO 

o  odooc:*!— 


°-  o 


t  ID 
d  d 


CO  CO  to  0)  05  03 


ffl 
3 

co  5 
DC  i 


o 


01  T- 

CO  CO 

co  in  co 


X 


CD  o  o  o  m  ID 


o  o  o 

CO  i- 

r-  i-  t- 


S  S: 


n  n  in  ifl 

,     I  I  I    o  o 

o  o  o  o  i  i 

^~  "~  o  o  . 

X   X  X  X  o  o 

CO   CM  Q  CO    X  X 

in  x  a)  in  a)  (O  „  „ 
n  *  ( 


CM  CD 

o  I 

o  U.  oi 

CM     X  ^! 


:o   o  a   a   *~        oo  co 
p        ^  .JS    I         ^   ^   m        co     i    co  to„ 

I    I    I    I    o  °   I    I    I    I    I    o  I  On    I  2 

OOO0*-|      OOOOOt-Ot-  0| 

°£xxx^*°xxxxx*x£?x5 
x  x 


x  m  ^    X    X  X 
in  cm  o   j<i-ioonrtffl'l-n  x  co  x 
io  coK^*-ddodd^ddco^^T-^cMcocor^ 


cn 


o 

i  e  c  = 

'id  A   D  o  is 

□  S  111  (3  O 


„    iu  _ 

E  S  J=  = 


C    CO    (D  03 


CL  C/3  Jj  O  <  J  I — 


"O 

(fl  .35  ™ 

[/J    (tf    (U  >■■ 


e  §  £ 


*=  9 

b 


=3  -£  <fl 


>  >  >  >  5  X 


xxxxxx_:=  =  >>>>>* 


15  /  REFERENCE  DATA 


711 


CQ 
I 

3 


CM 

d 


l 

DO 


o  o  o  o 


in  m  co  co  co  ca  co 


^  *t  co  co  dTtco'dcMcg^-^cvjccid  co  aD'^cocj^cvidco 


m  o  cm  co 

^  t  °?  ^  *i-ooiio*^n«icofflnsnio«iooi-onDmcoiii 
m  5  co  t»  o  co  co  i-cMT-^co^^dfflcscDCDoiaiK'WTfdair^KNifl'd 

+      +      T      +      +      +      +  +       +       +       +       +T—     T-T—  l+T-  ++  + 


I  o 
o  a> 


k  ?t  co  r^-rf-  f--r^h--r^-j^-[%--r^r--h-{v^rv  to  to  to  to  to  to 

sjN^tpfliqqui  n  r  cm  cm  cmoooooooooo  rv.  ttooooooin 
oooooooo  d  ddo  ddddddddddd  d  dddddddd 


to  e/>  c/3  co  co 


T3  e 

to  5 


O  LO  CO  i-  O  II) 

lO  t-  t-  r-  ^  CO 

X    X  X    X  XX 

o  co  o  o  to 

cd  i-  i-  t-  v  m 


en  cd  o  cm  o  ir>  a 

o  r-  co  c?)  co^tenmT-i-swVNnNCONOJO^CB 

LD    iflNNCyT-T-CMCOCM^lflMrtKT-    t-  W  9  S  S 


CO  CO 
O  1-  CD 
i—  C\J  LT) 


I  I 
o  o 


in   in  if) 


^  co  d 


C    9  w, 

cl      ai  - 

LUXFO<CLQ_Q_< 


E 

—   cJ  o   c  c 


a>   —  t 


E  ™ 
3  F 


CO 

I  Ills 


ffl  ™  (fl 


*^     J_l     .=      O      14  t  id 

F  O  SUOidUQ 


I  Si 
o  o  co  _j 

Q.  CC  CQ  CL 


S  I  s  .s 


h-  Z  Z  I-  D 


(D  _J  Q-  O 


_-  =  >:. 
X  X  X  X  X 


>  > 

XX  — 


£  >>>>SSxxxxxx  _  =  5>>>>> 


712 


EXPLANATORY  SUPPLEMENT 


Table  15.11 

planetary  Rings 


Saturn  Ring  Data 


Feature  Distance  (km)       Distance  (Rs) 


Equatorial  radius 

60330 

1.000 

D-ring  inner  edge 

67000 

1.11 

C-ring  inner  edge 

74400 

1,233 

B-ring  inner  edge 

91900 

1.524 

B-ring  outer  edge 

117400 

1.946 

A-ring  inner  edge 

121900 

2.021 

A-ring  gap  center 

133400 

2.212 

A-ring  outer  edge 

136600 

2.265 

F-ring  center 

140300 

2.326 

G-ring  center 

170000 

2.8 

E-ring  inner  edge 

-  180000 

~3 

E-ring  outer  edge 

-  480000 

-8 

Rings  of  Uranus 


Ring     Semi-major  Axis  (km)     Eccentricity       Azimuth  of       Precession  Rate  (deg./day) 

Periapse  (deg.) 


6 

41870 

0.0014 

236 

2.77 

5 

42270 

0.0018 

182 

2.66 

4 

42600 

0.0012 

120 

2.60 

a 

44750 

0.0007 

331 

2.18 

0 

45700 

0.0005 

231 

2.03 

V 

47210 

7 

47660 

s 

48330 

0.0005 

140 

51180 

0.0079 

216 

1.36 

Epoch:  1977  March  10,  20h  UT  (JD  2443213.33) 


15  /  REFERENCE  DATA 


713 


Table  15.12 

Constellation  Names  and  Abbreviations 


I^Ulllll  ItJLI  VB 

HDurev. 

Genitive 

Andromeda 

And 

Andromedae 

Antlia 

Ant 

Antliae 

Apus 

Aps 

Apodis 

Aquarius 

Aqr 

Ao,uarii 

Aquiia 

Aql 

Aqutlae 

Ara 

Ara 

Arae 

*Argo 

Arg 

Argus 

Aries 

AH 

A  net  is 

Auriga 

Aur 

Ai  i  rinap 

fl  U  J  lUuw 

Bootes 

Boo 

Bo  otis 

Caelum 

Cae 

Caeli 

Camelopardalis 

Cam 

Camelopardalis 

Cancer 

Cnc 

Cancri 

Canes  Venatici 

CVn 

Canum  Venaticorum 

Canls  Major 

CMa 

Ganis  Majohs 

Canis  Minor 

CMi 

Canis  Minoris 

Capri  corn  us 

Cap 

Capri  comi 

Carina 

Car 

Cassiopeia 

Cas 

Cassiope  ae 

Centaurus 

Cen 

Centauri 

Cepheus 

Cep 

Cephei 

Cetus 

Cet 

Ceti 

Chamaeleon 

Cha 

Chamaeleontis 

Circinus 

Cir 

i  Tr-  i  n  i 

W  1  U  -  1  II 

Columba 

Col 

Columbae 

Coma  Berenices 

Com 

Comae  Berenices 

t  Corona  Austrina  CrA 

Coronae  Austrinae 

Corona  Borealis 

CrB 

Coronae  Borealis 

Corvus 

Crv 

.  Corvi 

Crater 

Crt 

C,  r  3f  Pr  i 

Crux 

Cru 

Crucis 

Cygnus 

Cyg 

Cygni 

Delphinus 

Del 

Delphini 

Dorado 

Dor 

Doradus 

Draco 

Dra 

Equuleus 

Equ 

Equulei 

Eridanus 

Eri 

Eridani 

Fornax 

For 

Fornacis 

Gemini 

Gem 

Geminorum 

Gms 

Gru 

Gruis 

Hercules 

Her 

Hercuiis 

Horologium 

Hor 

Horologii 

Hydra 

Hya 

Hydrae 

Hydrus 

Hyi 

Hydri 

Indus 

Ind 

Indi 

Nominative        Abbrev.  Genitive 


Lacerta 

Lac 

Lacertae 

Leo 

Leo 

Leonis 

Leo  Minor 

LMi 

Leonis  Minoris 

Lepus 

Lep 

Leporis 

Libra 

Lib 

Librae 

Lupus 

Lup 

Lupi 

Lynx 

Lyn 

Lyncis 

Lyra 

Lyr 

Lyrae 

Mensa 

Men 

Mensae 

Microscopium 

Mic 

Microscopii 

Monoceros 

Mon 

Monocerotis 

Musca 

Mus 

Muscae 

Norma 

Nor 

Normae 

Octans 

Oct 

Octarttis 

Oph  iuchus 

\jpn 

Ophiuchi 

Orion 

Ori 

Ononis 

Pavo 

Pav 

Pavonis 

Peg 

Pegasi 

Perseus 

Per 

Persei 

Phoenix 

Phe 

Phoenicis 

Pictor 

Pic 

Picloris 

Pisces 

Psc 

Piscium 

^Piscis  Austrinus 

PsA 

Piscis  Austrini 

Puppis 

Pup 

Puppis 

Pyxis 

Pyx 

Pyxidis 

Reticulum 

Ret 

Reticuli 

oagrna 

Sge 

Sagittae 

Sagittarius 

Sgr 

Sagittarii 

Scorprus 

Sco 

Scorpii 

Sculptor 

Scl 

Sculptoris 

Scutum 

Set 

Scuti 

^Serpens 

Ser 

Serpentis 

Sextans 

Sex 

Sextantis 

Taurus 

Tau 

Tauri 

Telescopium 

Tel 

Telescopii 

Triangulum 

Tn 

Trianguli 

Triangulum  Austrate  TrA 

Trianguli  Australis 

Tucana 

Tuc 

Tucanae 

Ursa  Major 

UMa 

Ursae  Majoris 

Ursa  Minor 

UMi 

Ursae  Minoris 

Vela 

Vel 

Velorum 

Virgo 

Vir 

Virginls 

Volans 

Vol 

Volantis 

Vulpecula 

Vul 

Vulpeculae 

Note:  This  list  of  constellation  names  and  abbreviations  is  in  accordance  with  the  resolutions  of  the  International 
Astronomical  Union  [Trans.  IAUA,  156:  4,  221;  9,  66  and  77).  The  boundaries  of  the  constellations  are  listed  by  E. 
Delporte,  on  behalf  of  the  IAU,  in  Delimitation  scientifique  des  constellations  (tables  et  cartes)  (Cambridge 
University  Press,  1930);  the  areas  of  the  constellations  are  given  in  Handbook  B.A.A.,  1961. 

*  In  modern  usage  Argo  is  divided  into  Carina,  Puppis,  and  Vela. 

*  Australis  is  sometimes  used,  in  both  nominative  and  genitive. 

'  Serpens  may  be  divided  into  Serpens  Caput  and  Serpens  Cauda. 


4 


EXPLANATORY  SUPPLEMENT 


Table  15.13 

Mathematical  Constants 


v  =3  141592653589793 

e  =2.718281828459045 
=23.140692632779269 

log10  X  =0. 4342944819032518  loge  X 
|0ge  x         =  2. 302585092994046  log10  X 

1  radian      =  57?29577951 30823 

=  3437'.74677078494 

=  206264"806247096 
1  °  =  0. 01 745329251 99433  radian 

1 '  =0. 000290888208665722 

r  =0.00000484813681109536 

Solid  Angles 

1  steradian     =  3283  square  degrees  1  square  degree     =  0. 305  x  10^3  steradians 

1  steradian  =  1. 18  x  107  square  minules  1  square  minute  =  0.846  x  10  ~7  steradians 
1  steradian     =  4.25  x  1010  square  seconds     1  square  second     =  0.235  x  10  steradians 


A  sphere  subtends  4ir  steradians     =  41253  square  degrees 

=  1.485  x  10B  square  minutes  =  5.35  x  1011  square  seconds 


716 


EXPLANATORY  SUPPLEMENT 


It 


c.  — 


S  c 


»   

II 


M 
ffl 


T3 
C 

to 

03 
03 
Q. 
CO 

m  c 
i-  a) 

ui  -> 

a 
*  to 

li 


1 

o 

1 

o 

I 

o 

X 

X 

X 

0) 

^• 

CO 

o 

CM 

5 

o> 

CD 

US 

r~- 

CM 

r> 

S 

lO 

o 

in 

CO 

^■ 

« 

s 

m" 

lo 

« 

7 

T 

icy 

o 

o 

I 

O 

X 

X 

X 

t-  t- 


i-     o  ^- 

X  X 

x  CO 

hi  ifi 
m 

o     m  t- 

co     cvj  in 


S  -5 

*  (I  L 


8  f  g 


o 


a>  e 


i  _ 


sis 
ill 


1  *f 

|3  *"  "S 
<    3  ^, 


LT] 

O 

1 


Si 
o 


I 

O 


£ 


i 


S.     S  i= 


o 


c\i  i- 


CP 

Si! 


i-      CM  t- 


r       8  5 


V»         T-       *•         >  O 


to 


S  r- 


£  a) 


"I"  B 

<E0  E 

<D  CO  O  CO 

=  3  co  in 
e:  o 

rt  in  cm 

3    II  CD  O 


2  3  11  ci 
§  S  t  ii 

T-     T-     T-  O 


9> 


15  /  REFERENCE  DATA 


717 


Table  15.16 

Greek  Alphabet 


Of 

a  Inhs 

til \J  •  1  K± 

'I 

H 

eta 

u 

N 

nu 

T 

T 

tau 

0 

B 

beta 

e 

theta 

% 

xi 

V 

Y 

upsilon 

7 

r 

gamma 

i 

iota 

0 

O 

omicron 

4 

* 

phi 

6 

A 

delta 

K 

K 

kappa 

ir 

n 

pi* 

X 

X 

chi 

£ 

E 

epsilon 

A 

A 

lambda 

P 

p 

mo 

4 

* 

psi 

c 

Z 

zeta 

M 

M 

mu 

a 

E 

sigmaf 

Q 

omega 

*  m  ('curly  pi')  is  an  alternative  form  of  tt 
t  t  is  an  alternative  form  of  a. 


718 


EXPLANATORY  SUPPLEMENT 


Table  15.17 

International  System  of  Units  (SI) 


SI  Base  Units 


Quantity 

Name 

Symbol 

length 

meter 

m 

mass 

kilogram 

kq 

time 

second 

s 

electric  current 

ampere 

A 

thermodynamic  temperature 

kelvin 

K 

amount  of  substance 

mole 

mol 

luminous  intensity 

candela 

cd 

SI  Derived  Units  with  Special  Names 

Quantity 

Name 

Symbol 

Expression 

Expression 

in  terms 

in  terms 

of  other  units 

of  SI  base  units 

frequency 

hertz 

Hz 

s~1 

force 

newton 

N 

m  If  n  c  ^ 
1 1 1  r\y  a 

pressure,  stress 

pascal 

Pa 

N/m2 

energy,  work  quantity 

of  heat 

joule 

N  m 

power,  radiant  flux 

watt 

W 

.l/<s 

1  I  1  " 

electric  charge, 

quantity  of  electricity 

coulomb 

c 

s  A 

electric  potential, 

potential  difference, 

electromotive  force 

volt 

v 

V 

W/A 

m2  L-,-1  o  —  3  J —  1 

ni  f\y  o  r\ 

capacitance 

farad 

F 

CN 

m-2kg-1s4A2 

electric  resistance 

ohm 

n 

V/A 

m-2kgs-3A-2 

electric  conductance 

Siemens 

s 

A/V 

m~2  kg~1s3A2 

magnetic  flux 

weber 

Wb 

Vs 

m2  kg  s— 2  A-1 

magnetic  flux  density 

tesla 

T 

Wb/m2 

kgs"2A"1 

inductance 

henry 

H 

Wb/A 

m2  kgs_2A— 2 

Celsius  temperature 

degree  Celsius 

°C 

K 

luminous  flux 

lumen 

Im 

cd  sr 

illuminance 

lux 

Ix 

lm/m2 

m-2  cd  sr 

SI  Supplementary  Units 

Quantity 

Name 

Symbol 

plane  angle 

radian 

rad 

solid  angle 

steradian 

sr 

15  /  REFERENCE  DATA 


719 


Table  15.17,  continued 

International  System  of  Units  (SI) 


Units  in  Use  with  the  International  System 


Name 

Symbol 

Value  in  Si  unit 

minute 

min 

1  min  = 

60s 

hour 

h 

1  h 

= 

60  min  = 

3600  s 

day 

d 

1d 

= 

24  h  =  86400  s 

degree 

0 

1° 

= 

<7r/ 180)  rad 

minute 

/ 

r 

_ 

(1  /60)° 

=  (tt/ 10800)  rad 

second 

// 

1" 

= 

(1  /  60)' 

=  (tt  /  648000)  rad 

liter 

I,  L 

1  L 

= 

1  rim3  - 
i  urn  — 

1 U  ll\ 

metric  ton  t 

1 1 

103  kg 

SI  Prefixes 

Factor 

Prefix 

Symbol 

Factor 

Prefix 

Symbol 

1018 

exa 

E 

1CT1 

deci 

d 

101S 

peta 

P 

10"2 

centi 

c 

1012 

tera 

T 

10-3 

milli 

m 

109 

giga 

G 

10~6 

micro 

M 

106 

mega 

M 

io-9 

nano 

n 

103 

kilo 

k 

10"12 

pico 

P 

10s 

hecto 

h 

10-15 

femto 

f 

101 

deka 

da 

10-18 

atto 

a 

15.1  REFERENCES 

Taylor,  B.N.  and  Cohen,  E.R.  (1986).  "The  1986  Adjustment  of  the  Fundamental  Physical 
Constants"  COD  ATA  Newsletter,  November. 

Davies,  M.E.  et  al.  (1989).  "Report  of  the  IAU/IAG/COSPAR  Working  Group  on  Car- 
tographic Coordinates  and  Rotational  Elements  of  the  Planets  and  Satellites:  1988" 
Celestial  Mechanics  46,  187-204. 

Moritz,  H.  (1984).  "Geodetic  Reference  System  1980"  Bull  GeodesiqueSS,  388-398. 

 (1986).  The  International  System  of  Units  (SI).  Goodman,  D.T.  and  Bell,  R.J., 

eds.  U.S.  Department  of  Commerce. 


Glossary 


aberration  the  apparent  angular  displacement  of  the  observed  position  of  a  celestial 
object;  from  its  geometric  position,  caused  by  the  finite  velocity  of  light  in 
combination  with  the  motions  of  the  observer  and  of  the  observed  object. 
(See  aberration,  planetary.) 

aberration,  annual  the  component  of  stellar  aberration  (see  aberration,  stellar)  re- 
sulting from  the  motion  of  the  Earth  about  the  Sun. 

aberration,  diurnal  the  component  of  stellar  aberration  (see  aberration,  stellar) 
resulting  from  the  observer's  diurnal  motion  about  the  center  of  the  Earth. 

aberration,  E-terms  of  terms  of  annual  aberration  (see  aberration,  annual)  depend- 
ing on  the  eccentricity  and  longitude  of  perihelion  (see  longitude;  pericenter) 
of  the  Earth. 

aberration,  elliptic  see  aberration,  E-terms  of. 

aberration,  planetary  the  apparent  angular  displacement  of  the  observed  position 
of  a  celest  ial  body  produced  by  motion  of  the  observer  (see  aberration,  stellar) 
and  the  actual  motion  of  the  observed  object  (see  correction  for  light-time). 

aberration,  secular  the  component  of  stellar  aberration  (see  aberration,  stellar) 
resulting  from  the  essentially  uniform  and  rectilinear  motion  of  the  entire 
solar  system  in  space.  Secular  aberration  is  usually  disregarded. 

aberration,  stellar  the  apparent  angular  displacement  of  the  observed  position  of 
a  celestial  body  resulting  from  the  motion  of  the  observer.  Stellar  aberra- 
tion is  divided  into  diurnal,  annual,  and  secular  components.  (See  aberration, 
diurnal;  aberration,  annual;  aberration,  secular.) 

721 


y22  GLOSSARY 

altitude  the  angular  distance  of  a  celestial  body  above  or  below  the  horizon,  mea- 
sured along  the  great  circle  passing  through  the  body  and  the  zenith.  Altitude 
is  90°  minus  zenith  distance. 

anomaly  angular  measurement  of  a  body  in  its  orbit  from  its  perihelion. 

aphelion  the  point  in  a  planetary  orbit  that  is  at  the  greatest  distance  from  the 
Sun. 

apogee  the  point  at  which  a  body  in  orbit  around  the  Earth  reaches  its  farthest 
distance  from  the  Earth. 

apparent  place  the  position  on  a  celestial  sphere,  centered  at  the  Earth,  determined 
by  removing  from  the  directly  observed  position  of  a  celestial  body  the  effects 
that  depend  on  the  topocentric  location  of  the  observer;  i.e.,  refraction,  di- 
urnal aberration  (see  aberration,  diurnal),  and  geocentric  (diurnal)  parallax. 
Thus  the  position  at  which  the  object  would  actually  be  seen  from  the  center 
of  the  Earth,  displaced  by  planetary  aberration  (except  the  diurnal  part — see 
aberration,  planetary;  aberration,  diurnal)  and  referred  to  the  true  equator 
and  equinox. 

apparent  solar  time  the  measure  of  time  based  on  the  diurnal  motion  of  the  true 
Sun.  The  rate  of  diurnal  motion  undergoes  seasonal  variation  because  of  the 
obliquity  of  the  ecliptic  and  because  of  the  eccentricity  of  the  Earth's  orbit. 
Additional  small  variations  result  from  irregularities  in  the  rotation  of  the 
Earth  on  its  axis. 

aspect  the  apparent  position  of  any  of  the  planets  or  the  Moon  relative  to  the  Sun, 
as  seen  from  Earth. 

astrometric  ephemeris  an  ephemeris  of  a  solar-system  body  in  which  the  tabulated 
positions  are  essentially  comparable  to  catalog  mean  places  of  st  ars  at  a  stan- 
dard epoch.  An  astrometric  position  is  obtained  by  adding  to  the  geometric 
position,  computed  from  gravitational  theory,  the  correction  for  light-time. 
Prior  to  1984,  the  E-terms  of  annual  aberration  (see  aberration,  annual:  aber- 
ration, E-terms  of)  were  also  added  to  the  geometric  position. 

astronomical  coordinates  the  longitude  and  latitude  of  a  point  on  t  he  Earth  relative 
to  the  geoid.  These  coordinates  are  influenced  by  local  gravity  anomalies.  (See 
zenith;  longitude,  terrestrial;  latitude,  terrestrial.) 

astronomical  unit  (au)  the  radius  of  a  circular  orbit  in  which  a  body  of  negligible 
mass,  and  free  of  perturbations,  would  revolve  around  the  Sun  in  2n  I  k  days, 
where  k  is  the  Gaussian  gravitational  constant.  This  is  slightly  less  than  the 
semi-major  axis  of  the  Earth's  orbit. 


GLOSSARY 

atomic  second  see  second,  Systeme  International. 


723 


augmentation  the  amount  by  which  the  apparent  semidiameter  of  a  celestial  body 
as  observed  from  the  surface  of  the  Earth,  is  greater  than  the  semidiameter 
that  would  be  observed  from  the  center  of  the  Earth. 

azimuth  the  angular  distance  measured  clockwise  along  the  horizon  from  a  specified 
reference  point  (usually  north)  to  the  intersection  with  the  great  circle  drawn 
from  the  zenith  through  a  body  on  the  celestial  sphere. 

barycenter  the  center  of  mass  of  a  system  of  bodies;  e.g.,  the  center  of  mass  of  the 
solar  system  or  the  Earth-Moon  system. 

Barycentric  Dynamical  Time  (TDB)  the  independent  argument  of  ephemerides  and 
equations  of  motion  that  are  referred  to  the  barycenter  of  the  solar  system.  A 
family  of  timescales  results  from  the  transformation  by  various  theories  and 
metrics  of  relativistic  theories  of  Terrestrial  Dynamical  Time  (TDT).  TDB 
differs  from  TDT  only  by  periodic  variations.  In  the  terminology  of  the  gen- 
eral theory  of  relativity,  TDB  may  be  considered  to  be  a  coordinate  time.  (See 
dynamical  time.) 

brilliancy  for  Mercury  and  Venus  the  quantity  ks2  I  r2,  where  k  =  0.5(1  +  cos/),  i 
is  the  phase  angle,  s  is  the  apparent  semidiameter,  and  r  is  the  heliocentric 
distance. 

calendar  a  system  of  reckoning  time  in  which  days  are  enumerated  according  to 
their  position  in  cyclic  patterns. 

catalog  equinox  the  intersection  of  the  hour  circle  of  zero  right  ascension  of  a  star 
catalog  with  the  celestial  equator.  (See  dynamical  equinox;  equator.) 

celestial  ephemeris  pole  the  reference  pole  for  nutation  and  polar  motion:  the  axis 
of  figure  for  the  mean  surface  of  a  model  Earth  in  which  the  free  motion  has 
zero  amplitude.  This  pole  has  no  nearly  diurnal  nutation  with  respect  to  a 
space- fixed  or  Earth-fixed  coordinate  system. 

celestial  equator  the  projection  onto  the  celestial  sphere  of  the  Earth's  equator. 
(See  mean  equator  and  equinox;  equinox;  true  equator  and  equinox.) 

celestial  pole  either  of  the  two  points  projected  onto  the  celestial  sphere  by  the 

extension  of  the  Earth's  axis  of  rotation  to  infinity. 

celestial  sphere  an  imaginary  sphere  of  arbitrary  radius  upon  which  celestial  bodies 
may  be  considered  to  be  located.  As  circumstances  require,  the  celestial  sphere 
may  be  centered  at  the  observer,  at  the  Earth's  center,  or  at  any  other  location. 


724  GLOSSARY 

conjunction  the  phenomenon  in  which  two  bodies  have  the  same  apparent  celes- 
tial longitude  (see  longitude,  celestial)  or  right  ascension  as  viewed  from  a 
third  body.  Conjunctions  are  usually  tabulated  as  geocentric  phenomena.  For 
Mercury  and  Venus,  geocentric  inferior  conjunction  occurs  when  the  planet  is 
between  the  Earth  and  Sun,  and  superior  conjunction  occurs  when  the  Sun  is 
between  the  planet  and  Earth. 

constellation  a  grouping  of  stars,  usually  with  pictorial  or  mythical  associations, 
that  serves  to  identify  an  area  of  the  celestial  sphere.  Also,  one  of  the  precisely 
defined  areas  of  the  celestial  sphere,  associated  with  a  grouping  of  stars,  that 
the  International  Astronomical  Union  has  designated  as  a  constellation. 

Coordinated  Universal  Time  (UTC)  the  timescale  available  from  broadcast  time 
signals.  UTC  differs  from  TAI  (see  International  Atomic  Time)  by  an  integral 
number  of  seconds;  it  is  maintained  within  +0.90  second  of  UT1  (see  Univer- 
sal Time)  by  the  introduction  of  one  second  steps  (leap  seconds).  (See  leap 
second.) 

culmination  passage  of  a  celestial  object  across  the  observer's  meridian;  also  called 
"meridian  passage."  More  precisely,  culmination  is  the  passage  through  the 
point  of  greatest  altitude  in  the  diurnal  path.  Upper  culmination  (also  called 
''culmination  above  pole"  for  circumpolar  stars  and  the  Moon)  or  transit  is 
the  crossing  closer  to  the  observer's  zenith.  Lower  culmination  (also  called 
"culmination  below  pole"  for  circumpolar  stars  and  the  Moon)  is  the  crossing 
farther  from  the  zenith. 

day  an  interval  of  86400  SI  seconds  (see  second,  Systfeme  International),  unless 
otherwise  indicated. 

day  numbers  quantities  that  facilitate  hand  calculations  of  the  reduction  of  mean 
place  to  apparent  place.  Besselian  day  numbers  depend  solely  on  the  Earth's 
position  and  motion;  second-order  day  numbers,  used  in  higher  precision  re- 
ductions, depend  on  the  positions  of  both  the  Earth  and  the  star. 

declination  angular  distance  on  the  celestial  sphere  north  or  south  of  the  celestial 
equator.  It  is  measured  along  the  hour  circle  passing  through  the  celestial 
object.  Declination  is  usually  given  in  combination  with  right  ascension  or 
hour  angle. 

defect  of  illumination  the  angular  amount  of  the  observed  lunar  or  planetary  disk 
that  is  not  illuminated  to  an  observer  on  the  Earth. 

deflection  of  light  the  angle  by  which  I  he  apparent  path  of  a  photon  is  altered 
from  a  st  raight  line  by  the  gravitational  field  of  the  Sun.  The  path  is  deflected 
radially  away  from  the  Sun  by  up  to  1775  at  the  Sun's  limb.  Correction  for 


GLOSSARY 

725 

this  effect,  which  is  independent  of  wavelength,  is  included  in  the  reduction 
from  mean  place  to  apparent  place. 

deflection  of  the  vertical  the  angle  between  the  astronomical  vertical  and  the  geode- 
tic vertical,  (See  zenith;  astronomical  coordinates;  geodetic  coordinates.) 

Delta  T  (AT)  the  difference  between  dynamical  time  and  Universal  Time;  specif- 
ically the  difference  between  Terrestrial  Dynamical  Time  (TDT)  and  UTl- 
A7"=TDT-UT1. 

direct  motion  for  orbital  motion  in  the  solar  system,  motion  that  is  counterclock- 
wise in  the  orbit  as  seen  from  the  north  pole  of  the  ecliptic;  for  an  object 
observed  on  the  celestial  sphere,  motion  that  is  from  west  to  east,  resulting 
from  the  relative  motion  of  the  object  and  the  Earth. 

diurnal  motion  the  apparent  daily  motion  of  celestial  bodies  across  the  sky  from 
east  to  west,  caused  by  the  Earth's  rotation. 

AUT1  the  predicted  value  of  the  difference  between  UT1  and  UTC,  transmitted  in 
code  on  broadcast  time  signals:  AUT1  =  UT1  -  UTC.  (See  Universal  Time; 
Coordinated  Universal  Time.) 

dynamical  equinox  the  ascending  node  of  the  Eartlvs  mean  orbit  on  the  Earth's 
equator:  i.e.,  the  intersection  of  the  ecliptic  with  the  celestial  equator  at  which 
the  Sun's  declination  is  changing  from  south  to  north.  (See  catalog  equinox; 
equinox.) 

dynamical  time  the  family  of  timescales  introduced  in  1984  to  replace  ephemeris 
time  as  the  independent  argument  of  dynamical  theories  and  ephemerides. 
(See  Bary centric  Dynamical  Time;  Terrestrial  Dynamical  Time  ) 

eccentric  anomaly  in  undisturbed  elliptic  motion,  the  angle  measured  at  the  center 
of  the  ellipse  from  pericenter  to  the  point  on  the  circumscribing  auxiliary  circle 
from  which  a  perpendicular  to  the  major  axis  would  intersect  the  orbiting 
body.  (See  mean  anomaly;  true  anomaly.) 

eccentricity  a  parameter  that  specifies  the  shape  of  a  conic  section;  one  of  the 
standard  elements  used  to  describe  an  elliptic  orbit.  (See  elements,  orbital.) 

eclipse  the  obscuration  of  a  celestial  body  caused  by  its  passage  through  the  shadow 
cast  by  another  body. 

eclipse,  annular  a  solar  eclipse  (see  eclipse,  solar)  in  which  the  solar  disk  is  never 
completely  covered  but  is  seen  as  an  annulus  or  ring  at  maximum  eclipse.  An 
annular  eclipse  occurs  when  the  apparent  disk  of  the  Moon  is  smaller  than 
that  of  the  Sun. 


726  GLOSSARY 

eclipse,  lunar  an  eclipse  in  which  the  Moon  passes  through  the  shadow  cast  by 
the  Earth.  The  eclipse  may  be  total  (the  Moon  passing  completely  through 
the  Earth's  umbra),  partial  (the  Moon  passing  partially  through  the  Earth's 
umbra  at  maximum  eclipse),  or  penumbral  (the  Moon  passing  only  through 
the  Earth's  penumbra). 

eclipse,  solar  an  eclipse  in  which  the  Earth  passes  through  the  shadow  cast  by  the 
Moon.  It  may  be  total  (observer  in  the  Moon's  umbra),  partial  (observer  in 
the  Moon's  penumbra),  or  annular.  (See  eclipse,  annular.) 

ecliptic  the  mean  plane  of  the  Earth's  orbit  around  the  Sun. 

elements,  Besselian  quantities  tabulated  for  the  calculation  of  accurate  predictions 
of  an  eclipse  or  occultation  for  any  point  on  or  above  the  surface  of  the  Earth. 

elements,  orbital  parameters  that  specify  the  position  and  motion  of  a  body  in 
orbit.  (See  osculating  elements;  mean  elements.) 

elongation,  greatest  the  instants  when  the  geocentric  angular  distances  of  Mercury 
and  Venus  are  at  a  maximum  from  the  Sun. 

elongation  (planetary)  the  geocentric  angle  between  a  planet  and  the  Sun,  mea- 
sured in  the  plane  of  the  planet,  Earth  and  Sun.  Planetary  elongations  are 
measured  from  0°  to  180°,  east  or  west  of  the  Sun. 

elongation  (satellite)  the  geocentric  angle  between  a  satellite  and  its  primary,  mea- 
sured in  the  plane  of  the  satellite,  planet  and  Earth.  Satellite  elongations  are 
measured  from  0°  east  or  west  of  the  planet. 

epact  the  age  of  the  Moon;  the  number  of  days  since  New  Moon,  diminished  by  one 
day,  on  January  1  in  the  Gregorian  ecclesiastical  lunar  cycle.  (See  Gregorian 
calendar  and  lunar  phases.) 

ephemeris  a  tabulation  of  the  positions  of  a  celestial  object  in  an  orderly  sequence 
for  a  number  of  dates. 

ephemeris  hour  angle  an  hour  angle  referred  to  the  ephemeris  meridian. 

ephemeris  longitude  longitude  (see  longitude,  terrestrial)  measured  eastward  from 
the  ephemeris  meridian. 

ephemeris  meridian  a  fictitious  meridian  that  rotates  independently  of  the  Earth 
at  the  uniform  rate  implicitly  defined  by  Terrestrial  Dynamical  Time  (TDT). 

The  ephemeris  meridian  is  1.  002738/17"  east  of  the  Greenwich  meridian,  where 
AT  =  TDT  —  UT1. 


GLOSSARY  727 

ephemeris  time  (ET)  the  timescale  used  prior  to  1984  as  the  independent,  variable 
in  gravitational  theories  of  the  solar  system.  In  1984,  ET  was  replaced  by 
dynamical  time. 

ephemeris  transit  the  passage  of  a  celestial  body  or  point  across  the  ephemeris 
meridian. 

epoch  an  arbitrary  fixed  instant  of  time  or  date  used  as  a  chronological  reference 
datum  for  calendars  (see  calendar),  celestial  reference  systems,  star  catalogs, 
or  orbital  motions  (see  orbit). 

equation  of  center  in  elliptic  motion  the  true  anomaly  minus  the  mean  anomaly.  It 

is  the  difference  between  the  actual  angular  position  in  the  elliptic  orbit  and 
the  position  the  body  would  have  if  its  angular  motion  were  uniform. 

equation  of  the  equinoxes  the  right  ascension  of  the  mean  equinox  (see  mean  equa- 
tor and  equinox)  referred  to  the  true  equator  and  equinox;  apparent  sidereal 
time  minus  mean  sidereal  time.  (See  apparent  place;  mean  place.) 

equation  of  time  the  hour  angle  of  the  true  Sun  minus  the  hour  angle  of  the  ficti- 
tious mean  sun;  alternatively,  apparent  solar  time  minus  mean  solar  time. 

equator  the  great  circle  on  the  surface  of  a  body  formed  by  the  intersection  of  the 
surface  with  the  plane  passing  through  the  center  of  the  body  perpendicular 
to  the  axis  of  rotation.  (See  celestial  equator.) 

equinox  either  of  the  two  points  on  the  celestial  sphere  at  which  the  ecliptic  in- 
tersects the  celestial  equator;  also  the  time  at  which  the  Sun  passes  through 
either  of  these  intersection  points;  ie.,  when  the  apparent  longitude  (see  appar- 
ent place;  longitude,  celestial)  of  the  Sun  is  0°  or  180°.  (See  catalog  equinox; 
dynamical  equinox  for  precise  usage.) 

era  a  system  of  chronological  notation  reckoned  from  a  given  date. 

fictitious  mean  sun  an  imaginary  body  introduced  to  define  mean  solar  time;  es- 
sentially the  name  of  a  mathematical  formula  that  defined  mean  solar  time. 
This  concept  is  no  longer  used  in  high  precision  work. 

flattening  a  parameter  that  specifies  the  degree  by  which  a  planet's  figure  differs 
from  that  of  a  sphere;  the  ratio  /  =  (a  —  b) la,  where  a  is  the  equatorial  radius 
and  b  is  the  polar  radius. 

frequency  the  number  of  cycles  or  complete  alternations  per  unit  time  of  a  carrier 
wave,  band,  or  oscillation. 


728  GLOSSARY 

frequency  standard  a  generator  whose  output  is  used  as  a  precise  frequency  refer- 
ence; a  primary  frequency  standard  is  one  whose  frequency  corresponds  to  the 
adopted  definition  of  the  second  (see  second,  Systeme  International),  with  its 
specified  accuracy  achieved  without  calibration  of  the  device. 

Gaussian  gravitational  constant  (k  =  0.01720209895)  the  constant  defining  the  as- 
tronomical system  of  units  of  length  (astronomical  unit),  mass  (solar  mass) 
and  time  (day),  by  means  of  Kepler's  third  law.  The  dimensions  of  k2  are 
those  of  Newton's  constant  of  gravitation: 

gegenschein  faint  nebulous  light  about  20°  across  near  the  ecliptic  and  opposite 
the  Sun,  best  seen  in  September  and  October.  Also  called  counterglow. 

geocentric  with  reference  to,  or  pertaining  to,  the  center  of  the  Earth. 

geocentric  coordinates  the  latitude  and  longitude  of  a  point  on  the  Earth's  surface 
relative  to  the  center  of  the  Earth;  also  celestial  coordinates  given  with  re- 
spect to  the  center  of  the  Earth.  (See  zenith;  latitude,  terrestrial;  longitude, 
terrestrial.) 

geodetic  coordinates  the  latitude  and  longitude  of  a  point  on  the  Earth's  surface 
determined  from  the  geodetic  vertical  {normal  to  the  specified  spheroid).  (See 
zenith;  latitude,  terrestrial;  longitude,  terrestrial.) 

geoid  an  equipotential  surface  that  coincides  with  mean  sea  level  in  the  open  ocean. 
On  land  it  is  the  level  surface  that  would  be  assumed  by  water  in  an  imaginary 
network  of  frictionless  channels  connected  to  the  ocean. 

geometric  position  the  geocentric  position  of  an  object  on  the  celestial  sphere  re- 
ferred to  the  true  equator  and  equinox,  but  without  the  displacement  due  to 
planetary  aberration.  (See  apparent  place;  mean  place;  aberration,  planetary.) 

Greenwich  sidereal  date  (GSD)  the  number  of  sidereal  days  elapsed  at  Greenwich 
since  the  beginning  of  the  Greenwich  sidereal  day  that  was  in  progress  at 
Julian  date  0.0. 

Greenwich  sidereal  day  number  the  integral  part  of  the  Greenwich  sidereal  date. 

Gregorian  calendar  the  calendar  introduced  by  Pope  Gregory  XIII  in  1582  to  re- 
place the  Julian  calendar;  the  calendar  now  used  as  the  civil  calendar  in  most 
countries.  Every  year  that  is  exactly  divisible  by  four  is  a  leap  year,  except 
for  centurial  years,  which  must  be  exactly  divisible  by  400  to  be  leap  years. 
Thus  2000  is  a  leap  year,  but  1900  and  2100  are  not  leap  years. 

height  elevation  above  ground  or  distance  upwards  from  a  given  level  (especially 
sea  level)  to  a  fixed  point.  (See  altitude.) 


GLOSSARY  729 
heliocentric  with  reference  to,  or  pertaining  to,  the  center  of  the  Sun. 

horizon  a  plane  perpendicular  to  the  line  from  an  observer  to  the  zenith.  The  great 
circle  formed  by  the  intersection  of  the  celestial  sphere  with  a  plane  perpen- 
dicular to  the  line  from  an  observer  to  the  zenith  is  called  the  astronomical 
horizon. 

horizontal  parallax  the  difference  between  the  topocentric  and  geocentric  positions 
of  an  object,  when  the  object  is  on  the  astronomical  horizon. 

hour  angle  angular  distance  on  the  celestial  sphere  measured  westward  along  the 
celestial  equator  from  the  meridian  to  the  hour  circle  that  passes  through  a 
celestial  object. 

hour  circle  a  great  circle  on  the  celestial  sphere  that  passes  through  the  celestial 
poles  and  is  therefore  perpendicular  to  the  celestial  equator. 

inclination  the  angle  between  two  planes  or  their  poles;  usually  the  angle  between 
an  orbital  plane  and  a  reference  plane;  one  of  the  standard  orbital  elements 
(see  elements,  orbital)  that  specifies  the  orientation  of  an  orbit. 

International  Atomic  Time  (TAI)  the  continuous  scale  resulting  from  analyses  by 
the  Bureau  International  des  Poids  et  Mesures  of  atomic  time  standards  in 
many  countries.  The  fundamental  unit  of  TAI  is  the  SI  second  (see  second, 
Systeme  International),  and  the  epoch  is  1958  January  1. 

invariable  plane  the  plane  through  the  center  of  mass  of  the  solar  system  perpen- 
dicular to  the  angular  momentum  vector  of  the  solar  system. 

irradiation  an  optical  effect  of  contrast  that  makes  bright  objects  viewed  against  a 
dark  background  appear  to  be  larger  than  they  really  are. 

Julian  calendar  the  calendar  introduced  by  Julius  Caesar  in  46  B.C.  to  replace  the 
Roman  calendar.  In  the  Julian  calendar  a  common  year  is  defined  to  comprise 
365  days,  and  every  fourth  year  is  a  leap  year  comprising  366  days.  The  Julian 
calendar  was  superseded  by  the  Gregorian  calendar. 

Julian  date  (JD)  the  interval  of  time  in  days  and  fraction  of  a  day  since  4713  B.C. 
January  1,  Greenwich  noon,  Julian  proleptic  calendar.  In  precise  work  the 
timescale,  e.g.,  dynamical  time  or  Universal  Time,  should  be  specified. 

Julian  date,  modified  (MJD)  the  Julian  date  minus  2400000.5. 

Julian  day  number  (JD)  the  integral  part  of  the  Julian  date. 

Julian  proleptic  calendar  the  calendric  system  employing  the  rules  of  the  Julian 
calendar,  but  extended  and  applied  to  dates  preceding  the  introduction  of  the 
Julian  calendar. 


730  GLOSSARY 

Julian  year  a  period  of  365.25  days.  This  period  served  as  the  basis  for  the  Julian 
calendar. 

Laplacian  plane  for  planets  see  invariable  plane;  for  a  system  of  satellites,  the  fixed 
plane  relative  to  which  the  vector  sum  of  the  disturbing  forces  has  no  orthog- 
onal component. 

latitude,  celestial  angular  distance  on  the  celestial  sphere  measured  north  or  south 
of  the  ecliptic  along  the  great  circle  passing  through  the  poles  of  the  ecliptic 
and  the  celestial  object. 

latitude,  terrestrial  angular  distance  on  the  Earth  measured  north  or  south  of  the 
equator  along  the  meridian  of  a  geographic  location. 

leap  second  a  second  (see  second,  Systeme  International)  added  between  60s  and  0s 
at  announced  times  to  keep  UTC  within  0*90  of  UT1.  Generally,  leap  seconds 
are  added  at  the  end  of  June  or  December. 

librations  variations  in  the  orientation  of  the  Moon's  surface  with  respect  to  an 
observer  on  the  Earth.  Physical  librations  are  due  to  variations  in  the  rate 
at  which  the  Moon  rotates  on  its  axis.  The  much  larger  optical  librations  are 
due  to  variations  in  the  rate  of  the  Moon's  orbital  motion,  the  obliquity  of 
the  Moon's  equator  to  its  orbital  plane,  and  the  diurnal  changes  of  geometric 
perspective  of  an  observer  on  the  Earth's  surface. 

light,  deflection  of  the  bending  of  the  beam  of  light  due  to  gravity.  It  is  observable 
when  the  light  from  a  star  or  planet  passes  a  massive  object  such  as  the  Sun. 

light-time  the  interval  of  time  required  for  light  to  travel  from  a  celestial  body 
to  the  Earth.  During  this  interval  the  motion  of  the  body  in  space  causes 
an  angular  displacement  of  its  apparent  place  from  its  geometric  place  (see 
geometric  position).  (See  aberration,  planetary.) 

light-year  the  distance  that  light,  traverses  in  a  vacuum  during  one  year. 

limb  the  apparent  edge  of  the  Sun,  Moon,  or  a  planet  or  any  other  celestial  body 
with  a  detectable  disc. 

limb  correction  correction  that  must  be  made  to  the  distance  between  the  center 
of  mass  of  the  Moon  and  its  limb.  These  corrections  are  due  to  the  irregular 
surface  of  the  Moon  and  are  a  function  of  the  librations  in  longitude  (see 
longitude,  celestial)  and  latitude  (see  latitude,  celestial)  and  the  position  angle 
from  the  central  meridian. 

local  sidereal  time  the  local  hour  angle  of  a  catalog  equinox. 


GLOSSARY 


731 


longitude,  celestial  angular  distance  on  the  celestial  sphere  measured  eastward 
along  the  ecliptic  from  the  dynamical  equinox  to  the  great  circle  passing 
through  the  poles  of  the  ecliptic  and  the  celestial  object. 

longitude,  terrestrial  angular  distance  measured  along  the  Earth's  equator  from 
the  Greenwich  meridian  to  the  meridian  of  a  geographic  location. 

luminosity  class  distinctions  among  stars  of  the  same  spectral  class.  (See  spectral 
types  or  classes.) 

lunar  phases  cyclically  recurring  apparent  forms  of  the  Moon.  New  Moon,  First 
Quarter,  Full  Moon,  and  Last  Quarter  are  defined  as  the  times  at  which  the 
excess  of  the  apparent  celestial  longitude  (see  longitude,  celestial)  of  the  Moon 
over  that  of  the  Sun  is  0°,  90°,  180°,  and  270°,  respectively. 

lunation  the  period  of  time  between  two  consecutive  New  Moons. 

magnitude,  stellar  a  measure  on  a  logarithmic  scale  of  the  brightness  of  a  celestial 
object  considered  as  a  point  source. 

magnitude  of  a  lunar  eclipse  the  fraction  of  the  lunar  diameter  obscured  by  the 
shadow  of  the  Earth  at  the  greatest  phase  of  a  lunar  eclipse  (see  eclipse, 
lunar),  measured  along  the  common  diameter. 

magnitude  of  a  solar  eclipse  the  fraction  of  the  solar  diameter  obscured  by  the 
Moon  at  the  greatest  phase  of  a  solar  eclipse  (see  eclipse,  solar),  measured 
along  the  common  diameter. 

mean  anomaly  in  undisturbed  elliptic  motion,  the  product  of  the  mean  motion  of 
an  orbiting  body  and  the  interval  of  time  since  the  body  passed  pericenter. 
Thus  the  mean  anomaly  is  the  angle  from  pericenter  of  a  hypothetical  body 
moving  with  a  constant  angular  speed  that  is  equal  to  the  mean  motion.  (See 
true  anomaly;  eccentric  anomaly.) 

mean  distance  the  semi- major  axis  of  an  elliptic  orbit. 

mean  elements  elements  of  an  adopted  reference  orbit  (see  elements,  orbital)  that 
approximates  the  actual,  perturbed  orbit.  Mean  elements  may  serve  as  the 
basis  for  calculating  perturbations. 

mean  equator  and  equinox  the  celestial  reference  system  determined  by  ignoring 
small  variations  of  short  period  in  the  motions  of  the  celestial  equator.  Thus 
the  mean  equator  and  equinox  are  affected  only  by  precession.  Positions  in 
star  catalogs  are  normally  referred  to  the  mean  catalog  equator  and  equinox 
(see  catalog  equinox)  of  a  standard  epoch. 


732  GLOSSARY 

mean  motion  in  undisturbed  elliptic  motion,  the  constant  angular  speed  required 
for  a  body  to  complete  one  revolution  in  an  orbit  of  a  specified  semi-major 
axis. 

mean  place  the  coordinates,  referred  to  the  mean  equator  and  equinox  of  a  stan- 
dard epoch,  of  an  object  on  the  celestial  sphere  centered  at  the  Sun.  A  mean 
place  is  determined  by  removing  from  the  directly  observed  position  the  ef- 
fects of  refraction,  geocentric  and  stellar  parallax,  and  stellar  aberration  (see 
aberration,  stellar),  and  by  referring  the  coordinates  to  the  mean  equator 
and  equinox  of  a  standard  epoch.  In  compiling  star  catalogs  it  has  been  the 
practice  not  to  remove  the  secular  part  of  stellar  aberration  (see  aberration, 
secular).  Prior  to  1984,  it  was  additionally  the  practice  not  to  remove  the  el- 
liptic part  of  annual  aberration  (see  aberration,  annual;  aberration,  E-terms 
of). 

mean  solar  time  a  measure  of  time  based  conceptually  on  the  diurnal  motion  of  t  he 
fictitious  mean  sun,  under  the  assumption  that  the  Earth's  rate  of  rotation  is 
constant. 

meridian  a  great  circle  passing  through  the  celestial  poles  and  through  the  zenith 
of  any  location  on  Earth.  For  planetary  observations  a  meridian  is  half  the 
great  circle  passing  through  the  planet's  poles  and  through  any  location  on 
the  planet. 

month  the  period  of  one  complete  synodic  or  sidereal  revolution  of  the  Moon  around 
the  Earth;  also  a  calendrical  unit  that  approximates  the  period  of  revolution. 

moonrise,  moonset  the  times  at  which  the  apparent  upper  limb  of  the  Moon  is  on 
the  astronomical  horizon;  i.e.,  when  the  true  zenith  distance,  referred  to  the 
center  of  the  Earth,  of  the  central  point  of  the  disk  is  90°34'  +s  -  jr,  where  s  is 
the  Moon's  semidiameter,  7r  is  the  horizontal  parallax,  and  34'  is  the  adopted 
value  of  horizontal  refraction. 

nadir  the  point  on  the  celestial  sphere  diametrically  opposite  to  the  zenith. 

node  either  of  the  points  on  the  celestial  sphere  at  which  the  plane  of  an  orbit 
intersects  a  reference  plane.  The  position  of  a  node  is  one  of  the  standard 
orbital  elements  (see  elements,  orbital)  used  to  specify  the  orientation  of  an 
orbit. 

nutation  the  short-period  oscillations  in  the  motion  of  the  pole  of  rotation  of  a 
freely  rotating  body  that  is  undergoing  torque  from  external  gravitational 
forces.  Nutation  of  the  Earth's  pole  is  discussed  in  terms  of  components  in 
obliquity  and  longitude  (see  longitude,  celestial.) 


GLOSSARY  733 

obliquity  in  general  the  angle  between  the  equatorial  and  orbital  planes  of  a  body 
or,  equivalently,  between  the  rotational  and  orbital  poles.  For  the  Earth  the 
obliquity  of  the  ecliptic  is  the  angle  between  the  planes  of  the  equator  and 
the  ecliptic. 

occultation  the  obscuration  of  one  celestial  body  by  another  of  greater  apparent 
diameter;  especially  the  passage  of  the  Moon  in  front  of  a  star  or  planet,  or 
the  disappearance  of  a  satellite  behind  the  disk  of  its  primary.  If  the  primary 
source  of  illumination  of  a  reflecting  body  is  cut  off  by  the  occultation,  the 
phenomenon  is  also  called  an  eclipse.  The  occultation  of  the  Sun  hv  the  Moon 
is  a  solar  eclipse  (see  eclipse,  solar. ) 

opposition  a  configuration  of  the  Sun,  Earth  and  a  planet  in  which  the  apparent 
geocentric  longitude  (see  longitude,  celestial)  of  the  planet  differs  by  180° 
from  the  apparent  geocentric  longitude  of  the  Sun. 

orbit  the  path  in  space  followed  by  a  celestial  body. 

osculating  elements  a  set  of  parameters  (see  elements,  orbital)  that  specifies  the 
instantaneous  position  and  velocity  of  a  celestial  body  in  its  perturbed  orbit. 
Osculating  elements  describe  the  unperturbed  (two-body)  orbit  that  the  body 
would  follow  if  perturbations  were  to  cease  instantaneously. 

parallax  the  difference  in  apparent  direction  of  an  object  as  seen  from  two  different 
locations;  conversely,  the  angle  at  the  object,  that  is  subtended  by  the  line 
joining  two  designated  points.  Geocentric  (diurnal)  parallax  is  the  difference 
in  direction  between  a  topocentric  observation  and  a  hypothetical  geocentric 
observation.  Heliocentric  or  annual  parallax  is  the  difference  between  hypo- 
thetical geocentric  and  heliocentric  observations;  it  is  the  angle  subtended  at 
the  observed  object  by  the  semi-major  axis  of  the  Earth's  orbit.  (See  also 
horizontal  parallax.) 

parsec  the  distance  at  which  one  astronomical  unit  subtends  an  angle  of  one  second 
of  arc;  equivalently.  the  distance  to  an  object  having  an  annual  parallax  of 
one  second  of  arc. 

penumbra  the  portion  of  a  shadow  in  which  light  from  an  extended  source  is  par- 
tially but  not  completely  cut  off  by  an  intervening  body;  the  area  of  partial 
shadow  surrounding  the  umbra. 

pericenter  the  point  in  an  orbit  that  is  nearest  to  the  center  of  force.  (See  perigee; 
perihelion.) 

perigee  the  point,  at.  which  a  body  in  orbit  around  the  Earth  most  closely  ap- 
proaches the  Earth.  Perigee  is  sometimes  used  with  reference  to  the  apparent 
orbit  of  the  Sun  around  the  Earth. 


734  GLOSSARY 

perihelion  the  point  at  which  a  body  in  orbit  around  the  Sun  most  closely  ap- 
proaches the  Sun. 

period  the  interval  of  time  required  to  complete  one  revolution  in  an  orbit  or  one 
cycle  of  a  periodic  phenomenon,  such  as  a  cycle  of  phases.  (See  phase.) 

perturbations  deviations  between  the  actual  orbit  of  a  celestial  body  and  an  as- 
sumed reference  orbit;  also,  the  forces  that  cause  deviations  between  the  actual 
and  reference  orbits.  Perturbations,  according  to  the  first  meaning,  are  usually 
calculated  as  quantities  to  be  added  to  the  coordinates  of  the  reference  orbit 
to  obtain  the  precise  coordinates. 

phase  the  ratio  of  the  illuminated  area  of  the  apparent  disk  of  a  celestial  body  to 
the  area  of  the  entire  apparent  disk  taken  as  a  circle.  For  the  Moon,  phase 
designations  (see  lunar  phases)  are  defined  by  specific  configurations  of  the 
Sun,  Earth  and  Moon.  For  eclipses,  phase  designations  (total,  partial,  penum- 
bral,  etc.)  provide  general  descriptions  of  the  phenomena.  (See  eclipse,  solar: 
eclipse,  annular;  eclipse,  lunar.) 

phase  angle  the  angle  measured  at  the  center  of  an  illuminated  body  between  the 
light  source  and  the  observer. 

photometry  a  measurement  of  the  intensity  of  light  usually  specified  for  a  specific 
frequency  range. 

planetocentric  coordinates  coordinates  for  general  use,  where  the  z-axis  is  the  mean 
axis  of  rotation;  the  .r-axis  is  the  intersection  of  the  planetary  equator  (normal 
to  the  --axis  through  the  center  of  mass)  and  an  arbitrary  prime  meridian:  and 
they-axis  completes  a  right-hand  coordinate  system.  Longitude  (see  longitude, 
celestial)  of  a  point  is  measured  positive  to  the  prime  meridian  as  defined  by 
rotational  elements.  Latitude  (see  latitude,  celestial)  of  a  point  is  the  angle 
between  the  planetary  equator  and  a  line  to  the  center  of  mass.  The  radius  is 
measured  from  the  center  of  mass  to  the  surface  point. 

planetographic  coordinates  coordinates  for  cartographic  purposes  dependent  on  an 
equipotential  surface  as  a  reference  surface.  Longitude  (see  longitude,  celes- 
tial) of  a  point  is  measured  in  the  direction  opposite  to  the  rotation  (positive 
to  the  west  for  direct  rotation)  from  the  cartographic  position  of  the  prime 
meridian  defined  by  a  clearly  observable  surface  feature.  Latitude  (see  lati- 
tude, celestial)  of  a  point  is  the  angle  between  the  planetary  equator  (normal 
to  the  z-axis  and  through  the  center  of  mass)  and  normal  to  the  reference 
surface  at  the  point.  The  height  of  a  point  is  specified  as  the  distance  above 
a  point  with  the  same  longitude  and  latitude  on  the  reference  surface. 

polar  motion  the  irregularly  varying  motion  of  the  Earth's  pole  of  rotation  with 
respect  to  the  Earth's  crust.  (See  celestial  ephemeris  pole.) 


GLOSSARY  735 

precession  the  uniformly  progressing  motion  of  the  pole  of  rotation  of  a  freely 
rotating  body  undergoing  torque  from  external  gravitational  forces.  In  the  case 
of  the  Earth,  the  component  of  precession  caused  by  the  Sun  and  Moon  acting 
on  the  Earth's  equatorial  bulge  is  called  lunisolar  precession;  the  component 
caused  by  the  action  of  the  planets  is  called  planetary  precession.  The  sum  of 
lunisolar  and  planetary  precession  is  called  general  precession.  (See  nutation.) 

proper  motion  the  projection  onto  the  celestial  sphere  of  the  space  motion  of  a 
star  relative  to  the  solar  system;  thus  the  transverse  component  of  the  space 
motion  of  a  star  with  respect  to  the  solar  system.  Proper  motion  is  usually- 
tabulated  in  star  catalogs  as  changes  in  right  ascension  and  declination  per 
year  or  century. 

quadrature  a  configuration  in  which  two  celestial  bodies  have  apparent  longitudes 
(see  longitude,  celestial)  that  differ  by  90°  as  viewed  from  a  third  body. 
Quadratures  are  usually  tabulated  with  respect  to  the  Sun  as  viewed  from 
the  center  of  the  Earth. 

radial  velocity  the  rate  of  change  of  the  distance  to  an  object. 

refraction,  astronomical  the  change  in  direction  of  travel  (bending)  of  a  light  ray  as 
it  passes  obliquely  through  the  atmosphere.  As  a  result  of  refraction,  the  ob- 
served altitude  of  a  celestial  object  is  greater  than  its  geometric  altitude.  The 
amount  of  refraction  depends  on  the  altitude  of  the  object  and  on  atmospheric 
conditions. 

retrograde  motion  for  orbital  motion  in  the  solar  system,  motion  that  is  clockwise 
in  the  orbit  as  seen  from  the  north  pole  of  the  ecliptic;  for  an  object  observed 
on  the  celestial  sphere,  motion  that  is  from  east  to  west,  resulting  from  the 
relative  motion  of  the  object  and  the  Earth.  (See  direct  motion.) 

right  ascension  angular  distance  on  the  celestial  sphere  measured  eastward  along 
the  celestial  equator  from  the  equinox  to  the  hour  circle  passing  through  the 
celestial  object.  Right  ascension  is  usually  given  in  combination  with  declina- 
tion. 

Saros  a  Babylonian  lunar  cycle  of  6585.32  days,  or  18  years  11.33  days,  or  223 
lunations,  at  the  end  of  which  the  centers  of  the  Sun  and  Moon  return  so 
nearly  to  the  relative  positions  of  the  beginning  that  all  the  eclipses  (see 
eclipse)  of  the  period  recur  approximately  as  before,  but  in  longitudes  (see 
longitude,  terrestrial)  approximately  120°  to  the  west.  (See  lunar  phases.) 

satellite  natural  body  revolving  around  a  planet. 

satellite,  artificial  device  launched  into  a  closed  orbit  around  the  Earth,  another 
planet,  the  Sun,  etc. 


736  GLOSSARY 

second,  Systeme  International  (SI)  the  duration  of  9192631770  cycles  of  radiation 
corresponding  to  the  transition  between  two  liyperfine  levels  of  the  ground 
state  of  cesium  133. 

selenocentric  with  reference  to,  or  pertaining  to,  the  center  of  the  Moon, 

semidiameter  the  angle  at  the  observer  subtended  by  the  equatorial  radius  of  the 
Sun,  Moon,  or  a  planet. 

semi-major  axis  half  the  length  of  the  major  axis  of  an  ellipse;  a  standard  element 
used  to  describe  an  elliptical  orbit  (see  elements,  orbital). 

sidereal  day  the  interval  of  time  between  two  consecutive  transits  of  the  catalog 
equinox.  (See  sidereal  time.) 

sidereal  hour  angle  angular  distance  on  the  celestial  sphere  measured  westward 
along  the  celestial  equator  from  the  catalog  equinox  to  the  hour  circle  pass- 
ing through  the  celestial  object.  It  is  equal  to  360°  minus  right  ascension  in 
degrees. 

sidereal  time  the  measure  of  time  defined  by  the  apparent  diurnal  motion  of  the 
catalog  equinox;  hence  a  measure  of  the  rotation  of  the  Earth  with  respect  to 
the  stars  rather  than  the  Sun. 

solstice  either  of  the  two  points  on  the  ecliptic  at  which  the  apparent  longitude 
(see  longitude,  celestial)  of  the  Sun  is  90°  or  270°;  also  the  time  at  which  the 
Sun  is  at  either  point. 

spectral  types  or  classes  catagorization  of  stars  according  to  their  spectra,  primar- 
ily due  to  differing  temperatures  of  the  stellar  atmosphere.  From  hottest  to 
coolest,  the  spectral  types  are  O,  B,  A,  F,  G,  K,  and  M. 

standard  epoch  a  date  and  time  that  specifies  the  reference  system  to  which  celes- 
tial coordinates  are  referred.  Prior  to  1984  coordinates  of  star  catalogs  were 
commonly  referred  to  the  mean  equator  and  equinox  of  the  beginning  of  a 
Besselian  year  (see  year,  Besselian).  Beginning  with  1984  the  Julian  year  has 
been  used,  as  denoted  by  the  prefix  J,  e.g.,  J2000.0. 

stationary  point  (of  a  planet)  the  position  at  which  the  rate  of  change  of  the  appar- 
ent right  ascension  (see  apparent  place)  of  a  planet  is  momentarily  zero. 

sunrise,  sunset  the  times  at  which  the  apparent  upper  limb  of  the  Sun  is  on  the 
astronomical  horizon;  i.e.,  when  the  true  zenith  distance,  referred  to  the  center 
of  the  Earth,  of  the  central  point  of  the  disk  is  90° 50',  based  on  adopted  values 
of  34'  for  horizontal  refraction  and  16'  for  the  Sun's  semidiameter. 


GLOSSARY 


737 


surface  brightness  (of  a  planet)  the  visual  magnitude  of  an  average  square  arc-second 
area  of  the  illuminated  portion  of  the  apparent  disk. 

synodic  period  for  planets,  the  mean  interval  of  time  between  successive  conjunc- 
tions of  a  pair  of  planets,  as  observed  from  the  Sun;  for  satellites,  the  mean 
interval  between  successive  conjunctions  of  a  satellite  with  the  Sun,  as  ob- 
served from  the  satellite's  primary. 

synodic  time  pertaining  to  successive  conjunctions;  successive  returns  of  a  planet 
to  the  same  aspect  as  determined  by  Earth. 

Terrestrial  Dynamical  Time  (TDT)  the  independent  argument  for  apparent  geo- 
centric ephemerides.  At  1977  January  ld00h00m00s  TAI,  the  value  of  TDT  was 
exactly  1977  January  ld0003725.  The  unit  of  TDT  is  86400  SI  seconds  at 
mean  sea  level.  For  practical  purposes  TDT  -  TAI  +  32?184.  (See  Barycentric 
Dynamical  Time;  dynamical  time;  International  Atomic  Time.) 

terminator  the  boundary  between  the  illuminated  and  dark  areas  of  the  apparent 
disk  of  the  Moon,  a  planet  or  a  planetary  satellite. 

topocentric  with  reference  to,  or  pertaining  to,  a  point  on  the  surface  of  the  Earth, 
usually  with  reference  to  a  coordinate  system. 

transit  the  passage  of  a  celestial  object  across  a  meridian;  also  the  passage  of  one 
celestial  body  in  front  of  another  of  greater  apparent  diameter  (e.g.,  the  pas- 
sage of  Mercury  or  Venus  across  the  Sun  or  Jupiter's  satellites  across  its  disk); 
however,  the  passage  of  the  Moon  in  front  of  the  larger  apparent  Sun  is  called 
an  annular  eclipse  (see  eclipse,  annular).  The  passage  of  a  body's  shadow 
across  another  body  is  called  a  shadow  transit;  however,  the  passage  of  the 
Moon's  shadow  across  the  Earth  is  called  a  solar  eclipse.  (See  eclipse,  solar.) 

true  anomaly  the  angle,  measured  at  the  focus  nearest  the  pericenter  of  an  elliptical 
orbit,  between  the  pericenter  and  the  radius  vector  from  the  focus  to  the 
orbiting  body;  one  of  the  standard  orbital  elements  (see  elements,  orbital). 
(See  also  eccentric  anomaly;  mean  anomaly.) 

true  equator  and  equinox  the  celestial  coordinate  system  determined  by  the  in- 
stantaneous positions  of  the  celestial  equator  and  ecliptic.  The  motion  of  this 
system  is  due  to  the  progressive  effect  of  precession  and  the  short-term,  peri- 
odic variations  of  nutation.  (See  mean  equator  and  equinox.) 

twilight  the  interval  of  time  preceding  sunrise  and  following  sunset  (see  sunrise, 
sunset)  during  which  the  sky  is  partially  illuminated.  Civil  twilight  comprises 
the  interval  when  the  zenith  distance,  referred  to  the  center  of  the  Earth,  of 
the  central  point  of  the  Sun's  disk  is  between  90° 50"  and  96°,  nautical  twilight 


738  GLOSSARY 

comprises  the  interval  from  96°  to  102°,  astronomical  twilight  comprises  the 
interval  from  102°  to  108°. 

umbra  the  portion  of  a  shadow  cone  in  which  none  of  the  light  from  an  extended 
light  source  (ignoring  refraction)  can  be  observed. 

Universal  Time  (UT)  a  measure  of  time  that  conforms,  within  a  close  approxima- 
tion, to  the  mean  diurnal  motion  of  the  Sun  and  serves  as  the  basis  of  all  civil 
timekeeping.  UT  is  formally  defined  by  a  mathematical  formula  as  a  func- 
tion of  sidereal  time.  Thus  UT  is  determined  from  observations  of  the  diurnal 
motions  of  the  stars.  The  timescale  determined  directly  from  such  observa- 
tions is  designated  UTO;  it  is  slightly  dependent  on  the  place  of  observation. 
When  UTO  is  corrected  for  the  shift  in  longitude  (see  longitude,  terrestrial)  of 
the  observing  station  caused  by  polar  motion,  the  timescale  UTl  is  obtained. 
Whenever  the  designation  UT  is  used  in  this  volume,  UTl  is  implied. 

vernal  equinox  the  ascending  node  of  the  ecliptic  on  the  celestial  equator;  also  the 
time  at.  which  the  apparent  longitude  (see  apparent  place:  longitude,  celestial) 
of  the  Sun  is  0°.  (See  equinox.) 

vertical  apparent  direction  of  gravity  at  the  point  of  observation  (normal  to  the 
plane  of  a  free  level  surface.) 

week  an  arbitrary  period  of  days,  usually  seven  days;  approximately  equal  to  the 
number  of  days  counted  between  the  four  phases  of  the  Moon.  (See  lunar 
phases.) 

year  a  period  of  time  based  on  the  revolution  of  the  Earth  around  the  Sun.  The 
calendar  year  (see  Gregorian  calendar)  is  an  approximation  to  the  tropical 
year  (see  year,  tropical).  The  anomalistic  year  is  the  mean  interval  between 
successive  passages  of  the  Earth  through  perihelion.  The  sidereal  year  is  the 
mean  period  of  revolution  with  respect  to  the  background  stars.  (See  Julian 
year;  year,  Besselian.) 

year,  Besselian  the  period  of  one  complete  revolution  in  right  ascension  of  the 
fictitious  mean  sun,  as  defined  by  Newcomb.  The  beginning  of  a  Besselian 
year,  traditionally  used  as  as  standard  epoch,  is  denoted  by  the  suffix  ".0". 
Since  1984  standard  epochs  have  been  defined  by  the  Julian  year  rather  that 
the  Besselian  year.  For  distinction,  the  beginning  of  the  Besselian  year  is  now 
identified  by  the  prefix  B  (e.g.,  B1950.0). 

year,  tropical  the  period  of  one  complete  revolution  of  the  mean  longitude  of  the 
sun  with  respect  to  the  dynamical  equinox.  The  tropical  year  is  longer  than 
the  Besselian  year  (see  year,  Besselian)  by  0?148  7*,  where  T  is  centuries  from 
B1900.0. 


GLOSSARY  ygg 

zenith  in  general,  the  point  directly  overhead  on  the  celestial  sphere.  The  astro- 
nomical zenith  is  the  extension  to  infinity  of  a  plumb  line.  The  geocentric 
zenith  is  defined  by  the  line  from  the  center  of  the  Earth  through  the  observer. 
The  geodetic  zenith  is  the  normal  to  the  geodetic  ellipsoid  at  the  observer's 
location.  {See  deflection  of  the  vertical.) 

zenith  distance  angular  distance  on  the  celestial  sphere  measured  along  the  great 
circle  from  the  zenith  to  the  celestial  object.  Zenith  distance  is  90°  minus 
altitude. 

zodiacal  light  a  nebulous  light  seen  in  the  east  before  twilight  and  in  the  west 
after  twilight.  It  is  triangular  in  shape  along  the  ecliptic  with  the  base  on  the 
horizon  and  its  apex  at  varying  altitudes.  It  is  best  seen  in  middle  latitudes 
(see  latitude,  terrestrial)  on  spring  evenings  and  autumn  mornings. 


Index 


This  index  does  not  include  entries  from  Chapter  13  (Historical  Information),  Chapter  14 
(Related  Publications),  or  the  Glossary.  Material  in  Chapters  13  and  14  can  be  located 
more  effectively  through  the  Table  of  Contents.  The  Glossary  provides  definitions  of 
nomenclature  listed  in  alphabetical  order. 


A 

Aberration,  23,  127-135,  150 
annual,  23,  129-130 
constant  of,  131,  170 
correction  for  light- time,  23,  393 
day  numbers,  130,  169 
differential,  134 
diurnal,  129,  132,  160 
elliptic  (see  E-terms) 
E-terms,  131,  169 
planetary,  23,  127,  133 
secular,  129 

stellar,  23,  127-128,  130 
Adrastea  (Jupiter  XV),  409,  708,  710 
Airglow,  493 
Albedo 

geometric  of  asteroids,  415 
Allan  variance,  59 
Altitude,  14 

Altitude  and  azimuth  formulas,  208 
Amalthea  (Jupiter  V),  409,  708,  710 

orbital  elements,  349 
American  Association  of  Variable  Star 
Observers  (AAVSO),  513-514 
Analemmic  curve,  485 
Analytical  theories,  27 
Ananke  (Jupiter  XII),  708,  710 

state  vector,  353 
Angular  velocity.  Earth,  51 


Apparent  ephemerides,  307-308 
Apparent  places  of  fundamental  stars,  510 
Apparent  position,  23,  145-160,  165 
Apparent  sidereal  time,  444 
Apparent  solar  time,  74 
Argument  of  pericenter,  27 
Ariel  (Uranus  I),  709,  711 

apparent  distance  and  position  angle  orbital 
elements,  368 

physical  and  photometric  data,  412 
Aries,  first  point  of  (see  Equinox) 
Ascending  node,  major  planets,  315-316,  704 
Asteroids  (see  Minor  planets),  310 
Astrographic  place,  167 
Astrometric  position,  23,  166,  308,  31 1-313 
Astronomical  constants,  280,  289,  302-303, 
317-319 

coordinates,  16,  202-207 
Astronomical  unit,  27 
Atlas  (Saturn  XV),  410,  709,  711 
Atmospheric  loading,  244,  248-249 
Atomic  time,  39,  84 
Aurora,  493 

Axis  of  figure,  14,  109,  110 
Azimuth,  14 

741 


742 


INDEX 


B 

Barycentric  coordinates,  11 
Barycentric  Coordinate  Time  (TCB),  3,  45 
Barycentric  Dynamical  Time  (TDB),  2,  42 
Belinda  (Uranus  XIV),  412,  709,  711 
Besselian  elements  (see  Eclipses) 
Besselian  solar  year,  8 
Bianca  (Uranus  VIII),  412,  709,  71 1 
Brilliancy,  479 

Pluto,  406 

Saturn's  rings,  404 


c 

Calendar,  575 

accuracy,  578 

Chinese,  577,  594,  599 

Gregorian,  577,  580,  583,  604 

Hebrew,  577,  584,  588 

Indian,  591,594,  605 

Islamic,  577,  589,  591,  604 

Jewish  (see  Hebrew) 

Julian,  600,  605 

lunar,  577 

lunisolar,  577 

Moslem,  (see  Islamic) 

reform,  578 

solar,  577 
Callisto  (Jupiter  IV),  708,  710 

conjunctions,  348 

orbital  elements,  345 

phenomena,  348 

physical  and  photometric  data,  409 
Calypso  (Saturn  XIV),  410 

state  vector,  353,  708,710 
Carme  (Jupiter  XI),  708,  710 
Cartographic  coordinates,  383-388 
Galilean  satellites,  408^109 
longitude  systems,  403 

System  HI,  403 
planetocentric  coordinates,  385-388 
latitude,  387,  395 
longitude,  387 
range,  387 


planetographic  coordinates,  385-388 
height,  387 
latitude,  387,  395 
longitude,  387,  395 
reference  surface,  385 
prime  meridian,  384 
Mars,  403 
Mercury,  402 
Pluto,  406 
Sun,  398 
Saturn's  satellites,  411 
selenographic,  399^100 
colongitude,  399 
Catalog  drift,  293 
Catalogs 
compiled,  505 
differential,  506 
fundamental,  506 
observational,  505,  508 
absolute,  507 
differential,  507 
fundamental,  507 
reference,  507 
Celestial  coordinates,  20 
Celestial  ephemeris  pole,  109,  110,  139 
Celestial  reference  system,  199 
Celestial  sphere,  10 
Ceres,  697 

Cesium-beam  standards,  60 
Chandler  wobble,  257 
Charon  (Pluto  I),  709,711 

orbital  elements,  377 

physical  and  photometric  data,  414 
Chebyshev  polynomials,  305-307 
Chronological  cycles  and  eras,  579 

Christian,  579 

Hebrew,  584 

Indian,  591 

Islamic,  589 
Circulation,  33 1 
Clock  performance,  58-61 
Comets,  310-315 
Commensurability,  330 
Configurations,  476-482 
Conjunctions,  33,  479 

Connected-Element  Radio  Interferometry,  258 


INDEX 


743 


Constants,  693 

astronomical,  696 

fundamental,  693 

gravitational,  696 

mathematical,  714 
Constellations,  713 

Conventional  International  Origin  (CIO),  15, 

53,  110,  139,  223 
Conventional  terrestrial  reference  system,  200, 

223-224 

Coordinated  Universal  Time  (UTC),  6,  53,  76 
Coordinates,  astronomical,  202-207 
barycentric,  11,  1 64 

conversion  from  B1950.0  to  J2000.0,  167, 
184 

geocentric,  202-207 
geodetic,  202-207,  217-218 
grid,  209-210 
local,  207-216 

planetocentric,  31,  37,  385-388 

planetographic,  37,  385-388 

reductions  between  apparent  and  mean 
places,  145, 152 

reference  frame,  8 

selenographic,  399 

state  plane,  214-216 

topocentric,  10,  160-165 

transformations,  555-559 
Cordelia  (Uranus  VI),  412,  709,  7 1 1 
Cressida  (Uranus  IX),  412,  709,  71 1 


D 

Data  centers,  509 

Centre  de  Donnees  Stellaires,  509 

Goddard  Space  Flight  Center,  509,  513 
Datums,  16,  216-223 
Day  corrections,  292 
Day  numbers,  Besselian,  157,  169 

Greenwich  sidereal,  49,  75 

independent,  157-158 

Julian,  8,  55,  580,  600,  604 

second-order,  158-160 
Defect  of  illumination,  397 
Deflection  of  light,  24 
Deflection  of  the  vertical,  204 


Deimos  (Mars  II),  385,  708,  710 

orbital  elements,  343 

physical  and  photometric  data,  407 

reference  surface,  385 
Delta  T,  54,  81,83,  265-269 
Desdemona  (Uranus  X),  412,  709,  71 1 
Despina  (Neptune  V),  709,  711 
Diameter 

apparent  polar,  397 

asteroids,  radiometric  method,  414—417 

equatorial,  397 

polar,  396 
Differential  aberration,  134 
Differential  nutation,  120 
Differential  precession,  108 
Dione  (Saturn  IV),  708,  710 

orbital  elements,  356 

physical  and  photometric  data,  410 
Dip,  488 

Distance,  apparent,  392,  395,  396 
Doppler  method,  62 
Doppler  satellite  tracking,  257-258 
Double  stars,  515-516 
Dynamical  time,  39,  41 ,  54,  63 


E 

Earth,  aphelion,  477,  479 
figure,  200,  700 
gravity  field,  224-233 
mass,  697 

orbital  elements,  316,  700,  704 

orientation,  199 

perihelion,  477,  479 

physical  and  photometric  data,  706 

rotation,  25 1 

rotation  elements,  701,  705 
rotation  measurements,  61-63,  76 
tides,  233-238,  283-284 

Easter,  581,  583 

Eccentricity,  27,  315-316,  704 


744 


INDEX 


Eclipses,  34,  421 
Bessel's  method,  434 
center  of  figure  offset,  424 
Circulars,  423 
circumstances,  42 1 
elements,  421 
elements,  orbitai,  3 1 5-3 1 6 
ellipsoid,  200,  202,  206, 218-220,  223 
ephemerides,  424-425 
lunar,  35 

Besselian  elements,  468^169 

contacts,  467,  469 

magnitude,  470 

obscuration,  469 

occurrence,  conditions  for,  426-431 
partial,  430, 467, 470 
penumbra 1.  430,  467,  470 
phases,  470 
position  angle,  470 
total,  431,  467,  470 
visibility,  470-47 1 
penumbra,  428,  438 
published  data,  422-424 
satellites  of  Jupiter,  348 
solar,  35 
annular,  433 
annular-total,  433 
Besselian  elements  (see  elements) 
central  line,  455—456 
circumstances,  general,  421 ,  446,  450, 

459-461 
circumstances,  local,  461^167 
contacts,  459-460, 462 
curves,  450,  453-^58 
duration,  455,  458 
elements,  450 
Besselian,  435-441 
Besselian,  auxiliary,  445,  449 
elevation,  correction  for,  467 
equations  of  condition,  446-450 
limb  corrections,  lunar,  425 
magnitude,  458,  463^164 
maps,  423,  462 
obscuration,  463,  465^466 
observer's  coordinates,  441-446 
occurrence,  conditions  for,  426-428. 
432-434 


partial,  431 
position  angle,  463 
total,  433 
time  scale  (Delta  T),  425,  467 
umbra,  429,  438 
Ecliptic,  11.  114 
Elara  (Jupiter  VII J,  708,  710 

state  vector,  353 
Elements,  Besselian  (see  Eclipses  and 

Occupations) 
Elements,  orbital,  315-316,  704 
Ellipsoid,  200,  202,  206,  218-220,  223 
Elongations,  33 

Enceladus  (Saturn  II),  708,  710 

orbital  elements,  356 

physical  and  photometric  data,  410 
Energy  conversion  factors,  715 
Ephemerides,  fundamental,  279 

initial  conditions,  304 
Ephemeris  meridian,  54-55 
Ephemeris  time,  2-3, 42,  76,  79,  81-82 
Ephemeris  transit,  major  planets,  309 
Epimetheus  (Saturn  XI),  410,  709,  71  I 
Epochs,  27,  698 
Equation  of  center,  327 
Equations  of  motion,  26 
Equation  of  the  equinoxes,  4,  48,  53,  1 16 
Equation  of  time,  5,  55,  74,  485 
Equator,  1 1.  114,386,393 
Equinox,  catalog,  48-49,  54,  97,  293 

dynamical,  1 1,  55,  97,  288-289 
Equinox  correction,  167-168 
Equinox  of  date,  75 

dates  of,  477 
Errors.  566-568 
Euler  angles,  284-285 
Europa  (Jupiter  JJ).  708,  710 

conjunctions,  348 

orbital  elements,  345 

phenomena,  348 

physical  and  photometric  data,  409 


F 

Figure  effects,  282 

First  point  of  Aries  {see  Equinox),  12 

FK5,  167 


INDEX 


745 


Flattening,  major  planets  and  Moon,  398-407 

apparent,  390 

Mercury,  402 
Force  model  evaluation,  287 
Frequencies,  standard,  58 
Fundamental  ephemerides,  279-281 

G 

Galatea  (Neptune  VI),  709,  71 1 
Galaxies,  bright,  51 1 

Second  Reference  Catalogue  of  Bright 
Galaxies,  511,528 

Third  Reference  Catalogue  of  Bright 
Galaxies,  530 

X-ray  sources,  533 
Galilean  satellites,  345 
Ganymede  (Jupiter  III),  708,  710 

conjunctions,  348 

orbital  elements,  345 

phenomena,  348 

physical  and  photometric  data,  409 
Gaussian  gravitational  constant,  27 
Gegenschein,  493 

Geocentric  coordinates,  10,  126,  202-207 
Geocentric  Coordinate  Time  (TCG),  3,  45 
Geocentric  planetary  phenomena,  478 
Geodetic  coordinates,  16,  126,  202-207, 

217-218 
Geodetic  datums,  702 
Geodetic  reference  spheroids.  701 
Geographic  coordinates,  16 
Geoid,  17 

undulation,  202 

Geopotential  field,  227-233 

Geopotenttal  surface,  201 

Global  Positioning  System  (GPS),  64,  68, 
259-261 

Globular  star  clusters,  511,  526 

Gravitational  model.  280 

Greek  alphabet,  7 1 7 

Greenwich  civil  time,  76 

Greenwich  mean  astronomical  time,  76 

Greenwich  mean  time,  7,  76 

Greenwich  meridian,  384,  386.  393 

Greenwich  sidereal  angle,  21 

Greenwich  sidereal  date,  49,  75 

Greenwich  sidereal  time,  4,  49-53,  1 16 


Greenwich  transit,  54 
Gregorian  calendar,  7 
Gyroscopes,  261-262 

H 

Helene  (Saturn  XII),  410,  709,  71 1 
Heliocentric  coordinates,  1 1 
Heliocentric  planetary  phenomena,  481-482 
Himalia  (Jupiter  VI),  708,  710 

state  vector,  353 
Horizon  system,  208-209 
Horizontal  parallax 

Moon,  400 

Sun,  398 
Hubble  sequence,  528 
Hydrogen  masers,  60 
Hyperion  (Saturn  VII),  385,  41 1,  708,  710 

differential  coordinates,  367 

orbital  elements,  360 

physical  and  photometric  data,  385,  4 1 1 

I 

Iapetus  (Saturn  VIII),  411,  708,  710 
differential  coordinates,  367 
orbital  elements,  360 
physical  and  photometric  data,  41 1 
Illuminated  disk,  388-397 
Illumination,  490-492 

planets,  401-407 
Illumination,  defective,  397 
Improved  Lunar  Ephemeris,  81 
Inclination,  27 
Initial  conditions,  304 
International  Atomic  Time  (TAI),  2,  40 
International  Earth  Rotation  Service  (IERS), 

86,  111,  200,  223-224,  262-265 
Interpolation,  546-548 
Invariable  plane,  1 1 
Inverse  interpolation,  545,  548 
Io  (Jupiter  I),  708,710 
conjunctions,  348 
orbital  elements,  345,  708 
phenomena,  348 

physical  and  photometric  data,  409,  710 


746 


INDEX 


J 

janus  (Saturn  X),  410,  708,  710 
Julian  calendar,  7 
Julian  date,  8,  55,  600 

modified,  8 
Julian  day  numbers,  8,  55,  580,  600,  603 
Julian  period,  580 
Julian  year,  8 

Juliet  (Uranus  XI),  412,  709,  711 

Juno,  697 

Jupiter 

magnitude,  404 

mass,  697 

orbital  elements,  316,  704 
phase,  404 

physical  and  photometric  data,  706 
physical  ephemeris,  403-404 
rotation  elements,  404,  705 
satellites,  345, 409,  708,  710 
Jupiter's  satellites,  708,  710 
I-IV,  345, 409 
V,  348,  409 
VI-XHI,  352,  409 
XIV,  351 

K 

Kepler's  law,  26 

L 

Laplacian  plane,  327 
Larissa  (Neptune  VII),  709,  71 1 
Laser  ranging,  254-255 
Latitude  (see  also  Coordinates) 

planetocentric,  387,  395 

planetographic,  387,  395 
Laws  of  motion,  24 
Leap  second,  7,  53 
Least  squares,  300-301,  568-573 
Leda  (Jupiter  XIII),  708,  710 

state  vector,  353 
Length  of  day,  19,  265-269 
Librations,  Moon,  398^100 

geocentric  optical,  398 

physical  rotational,  398 

topocentric  optical,  399-400 


Librations,  satellite,  33 1 

Light,  deflection  of,  135-139,  166 

velocity  of,  693 
Light-time,  127,  148 

correction  for,  23,  393 
Local  apparent  solar  time,  4 
Local  coordinates,  207-216 
Local  hour  angle,  14, 55 
Local  mean  time,  5,  76 
Local  meridian,  1 1,  55 
Local  place,  165 

Local  sidereal  time,  4,  49,  52-53 
Longitude  {see  also  Coordinates) 

planetocentric,  387 

planetographic,  387,  395 
Longitude  of  node,  27 
LORAN-C,  66 
Love  numbers,  31,  233,  250 
Luminosity,  Iapetus,  41 1 
Luminosity  class,  bright  galaxies 

planetocentric,  387 

planetographic,  387,  395 
Lunar  eclipses  (see  Eclipses,  lunar) 
Lunar  ephemeris,  317 
Lunar  Laser-Ranging,  62,  299-300 
Lunar  librations,  284-286,  398^400 

geocentric  optical,  398 

physical  rotational,  398 

topocentric  optical,  399-400 
Lunar  secular  acceleration,  288 
Lysithea  (Jupiter  X),  708,  710 

state  vector,  353 

M 

Magnitude 
asteroids,  414-416 

infrared,  415 

visual,  414 
major  planets  (see  individual  planets) 
at  1 AU  and  0°  phase,  388 
mean  opposition,  389 
minor  planets,  4144-16 

infrared,  415 

visual,  414 
Saturn's  rings,  404 


INDEX 


Mars 

defective  illumination,  403 
magnitude,  403 
mass,  697 

orbital  elements,  316,  704 
physical  and  photometric  data,  706 
physical  ephemeris,  403 
rotation  elements,  403,  705 
satellites,  342,  403,  708,  710 
Masses,  697 

Mathematical  model,  281 

Matrices,  552-559 

Matrix  methods,  1 80 

Maximum  defect  of  illumination,  397 

Mean  sea  level,  201-202 

Mean  sidereal  time,  4,  48,  75 

Mean  solar  time,  3,  74-75,  79 

Mercury 

brilliancy,  402 

elongations,  479 

magnitude,  402 

mass,  697 

orbital  elements,  316,  704 

physical  and  photometric  data,  402,  706 

physical  ephemeris,  401^103 

rotation  elements,  402,  705 

transit,  47 1 
Mercury  ion  frequency  standard,  61 
Meridian  passage  (see  Transit,  meridian,  33 
Metis  (Jupiter  XVI),  708,  710 
Mimas  (Saturn  I),  708,  710 

orbital  elements,  356 

physical  and  photometric  data,  410 
Minor  Planet  Center,  310 
Minor  planets,  310-315 

geocentric  phenomena,  414-417 

magnitudes,  3 1 1 
Miranda  (Uranus  V),  709,  71 1 

orbital  elements,  368 

physical  and  photometric  data,  412 
MK  spectral  classification  system,  520 
Modified  Julian  date,  56 
Month,  577 

lengths,  698 

synodic,  486,  576 


Moon 

defective  illumination,  399 
eclipses  (see  Eclipses,  lunar) 
ephemeris,  basis  of,  317 
fraction  illuminated,  399 
horizontal  parallax,  400 
librations,  398-400 

optical,  398 

physical,  398 

topocentric,  399-400 
limb  corrections,  425 
mass,  696 

mean  longitude,  115 
midpoint  of  bright  limb,  399 
node,  1 1 5 

orbital  elements,  701,  708 
perigee,  115 
phases,  478^179 

physical  and  photometric  data,  398^101, 

701,706,710 
physical  ephemeris,  398—401 
principal  moment  of  inertia,  399 
rise  and  set,  485-486 
secular  acceleration,  77,  84 
selenographic  coordinates,  399-400 
semidiameter,  401 
topocentric  parallax,  400 
Moonlight,  493 

Moonrise  and  moonset,  32,  485^-86 

N 

Naiad  (Neptune  III),  709,  71 1 
Nautical  twilight,  33, 483,  492 
Neptune 

magnitude,  406 

mass,  697 

orbital  elements,  316,  704 
physical  and  photometric  data,  405-406, 
706 

physical  ephemeris,  405-406 

rotation  elements,  705 

satellites,  373,  4 1 3^1 1 4,  709,  7 1 1 
Nereid  (Neptune  II),  709,  71 1 

differential  coordinates,  376 

orbital  elements,  375 
Neweomb's  Tables,  317 
Nonrigid-body  effects,  286 


748 


INDEX 


North  pole,  384-385,  392-393 
apparent,  391 
Sun,  398 

Numerical  differentiation,  560-562 
Numerical  integration,  27,  286,  562-566 
Nutation,  12,99,  109,  111,  116-121,  151 

corrections,  116-119 

differential,  120 

IAU  theory,  111-113 

in  longitude  and  obliquity,  112-1 15 

planetary  terms,  117-119 

o 

Oberon  (Uranus  IV),  709,  7 1 1 

oblateness,  14 

orbital  elements,  369 

physical  and  photometric  data,  412 
Obliquity  of  the  ecliptic,  12,  171,  289 
Observational  catalog,  179 
Occupations,  34,  494-498 
Occupations,  lunar,  494 

elements  (Besselian),  494 

planets,  498 
Ocean  loading,  244-248 
Ocean  tide  model,  240-244 
Open  star  clusters,  51 1,  522 

Lund  Catalog,  511,522 

Trumpler  classification  system,  524 
Ophelia  (Uranus  VII),  412,  709,  711 
Opposition,  33 
Orbital  elements,  27 


P 

Pallas,  697 

Pandora  (Saturn  XVII),  410,  709,  7 1 1 
Parallax,  21,  121,  123 
Parallax,  annual,  22,  125 

diurnal  (geocentric),  22,  123-124,  160 

equatorial  horizontal,  Moon,  400 

horizontal,  Moon,  400 

horizontal,  Sun,  398 

in  altitude,  125 

solar,  22 

topocentric,  Moon,  400 
Parameterized  post-Newtonian  equation,  281 


Pasiphae  (Jupiter  VIII),  708,  710 

state  vector,  353 
Perihelion,  477 
Perturbations,  28 
Phase,  396 
angle,  388,  396 
coefficient,  388 

Galilean  satellites,  408-409 
Mercury,  402 
Venus,  403 
corrections,  291-292 
fraction  of  Moon  illuminated,  399 
Moon,  399,  478 
Phases  and  magnitudes,  388-397 

inlrinsic  properties,  388 
Phobos  (Mars  I),  385,  708,  710 
orbital  elements,  343 
physical  and  photometric  data,  385,  407 
Phoebe  (Saturn  IX),  708,  710 
differential  coordinates,  368 
orbital  elements,  367 
physical  and  photometric  data,  410 
Photometric  standards,  stars,  51 1,  516 
UVBRI,  51 1,517 
uvby  and  H/3,  511,517 
Physical  ephemerides,  36,  383^419 
asteroids,  414-417 
Moon,  398^101 
planets,  401-407 
Jupiter,  403-104 
Mars,  403 
Mercury,  401^102 
Neptune,  405^106 
Pluto,  406 
Saturn,  404-405 
Uranus,  405 
Venus,  402^03 
references,  417^119 
satellites,  407-11 4 
Galilean,  408^109 
Jupiter,  408-109 
Mars,  407-408 
Neptune,  413^114 
Pluto,  414 

Saturn,  408,410-411 
Uranus,  411-413 
Sun, 397-398 
Planetocentric  coordinates,  31,  37,  385-388 
Planetocentric  orbital  longitude,  Sun,  401 


INDEX 


749 


Planetographic  coordinates,  37,  385-388 
Planets 

aberration,  150 

apparent  positions,  145-152 

astrometric  positions,  166,  308 

brightness 
Pluto,  406 
Saturn's  rings,  404 

brilliancy,  479 

configurations,  476-482 

deflection  of  light,  149 

elements,  315-316,  704 

elongations,  479 

geocentric  phenomena,  478^181 

heliocentric  phenomena,  481^-82 

masses,  697 

orbital  elements,  315-316,  704 
physical  and  photometric  data,  401—407, 
706 

precession,  150 

rings,  325,  712 

rotation  elements,  705 

satellites,  325, 407-414,  708-71 1 

semidiameters,  401-407 

stationary,  479 

synodic  periods,  480-481 

visibility,  480 
Plate  motions,  249-250 
Pluto 

mass,  697 

orbital  elements,  316,  704 

physical  and  photometric  data,  406,  706 

physical  ephemeris,  406 

rotation  elements,  406,  705 

satellite,  377,414,  709,711 
Point  mass  interactions,  281 
Polaris,  498-502 

Polar  motion,  14,  18,  109,  111,  139-140, 

238-240, 269^272 
Polynomials,  548 
Portable  clocks,  65 
Portia  (Uranus  XII),  412,  709,  71 1 
Positions 

angle,  392,  395 

bright  limb,  Moon,  399 
greatest  defect  of  illumination,  397 
apparent,  23,  145-160,  165 
astrometric,  23,  166,  308,  311-313 


geocentric,  10,  126,  202-207 
heliocentric,  1 1 
Precession,  105,  150 
differential,  108 
drift,  293 
general,  99 
geodesic,  100 
IAU  1976,  173 
luni-solar,  12,  99 
Newcomb's,  106,  173 
planetary,  13,  99 

reduction,  day  number  formulas,  108 

rotation  matrix,  103 
Prime  meridian,  384,  386,  393 

Mars,  403 

Mercury,  402 

Pluto,  406 

Sun,  398 
Prime  vertical,  204 

Prometheus  (Saturn  XVI),  410,  709,  711 
Proper  motion,  22,  121,  171.  174,  184 
Proteus  (Neptune  VIII).  709,  71 1 
Puck  (Uranus  XV),  412,  709,  71 1 
Pulsars,  511,521 


Q 

Quartz-crystal  oscillators,  60 
Quasars,  511,  530 
Quasi-stellar  objects,  530 

active  galactic  nuclei,  531 

catalogs,  530-531 
Radar  ranging,  294-297 
Radial  velocity,  22,  1 2 1 .  5 1 1 .  5 1 8 
Radio  interferometry,  62 
Radiometric  method  of  diameter  estimation, 
414^117 

geometric  albedo,  415 

infrared  magnitudes,  415 

phase  integral,  416 
Radio  sources 

astrometric  calibrators,  51 1,  531 

flux  calibrators,  511,532 
Radius  of  the  planets,  387 

apparent  polar,  390,  396 

apparent  subsolar,  396 
Reference  frame,  inertial,  96 
Reference  frames,  223,  280 


750 


INDEX 


Reference  systems,  95-99.  199 
Refraction,  24,  140-145 

rising  and  setting  phenomena.  488 

Saastamoinen,  143 
Relativity,  40,  70,  96,  149,  295 
Rhea  (Saturn  V),410,  708,710 

orbital  elements,  360 

physical  and  photometric  data,  410 
Rings  of  Satum,  brilliance,  404 
Rising  and  setting  phenomena,  482^190 

Moon,  485^*86 

Sun,  483-485 
Rosalind  (Uranus  XIII),  412.  709.  711 
Rotational  elements,  383-388 

deformation,  238-240 

direct,  385 

retrograde,  385 

Sun,  397 
Rotation  of  axes,  552-553 
Rotation  of  the  Earth,  25 1 
Rubidium  clocks,  61 

s 

Saros,  35 

Satellite  Almanac,  325 
Satellites 

apparent  distance  and  position  angle,  341 
apparent  orbits,  336 
authorities,  378 
differential  coordinates,  341 
elongations,  341 
invariable  plane,  327 
Laplacian  plane,  327 
orbital  data,  708 
planetocentric  coordinates,  333 
rectangular  coordinates,  341 
Saturn 
mass,  697 

orbital  elements,  3 1 6,  704 
physical  and  photometric  data,  404-405, 
706 

physical  ephemeris,  404-405 
rings,  354,  404,  712 
rotation  elements,  404,  705 
satellites,  356,  408,  410-41 1,  708-71 1 
semidiameter,  404 
Schwiderski  model,  242-243 


Seasons,  477,  479 
Second,  SI,  40,  84 
Selenocentric  coordinates,  1 1 
Selenographic  coordinates,  399 
Semidiameter 

Moon,  401 

Sun,  398 
Sidereal  day,  48 
Sidereal  hour  angle,  1 1 
Sidereal  time,  3^*.  39,  48,  55 

apparent,  4,  48 

local,  4,  49 

mean,  4, 48 

relation  to  universal  time,  50-53 
Sinope  (Jupiter  IX),  708,  710 
Shadow  lengths,  489 
State  vector,  353 
Solar  corona,  295 
Solar  eclipse  (see  Eclipses,  solar) 
Solar  parallax,  398 
Solid  Earth  tides,  233-238 
Solstices,  times  of,  477 
Spacecraft  data,  297-299 
Space  motion,  121 
Space-Time  coordinates,  45 
Spectral  classification,  519 

MK  spectral  standards,  51 1-520 

Morgan-Keenan  classification  system 
(MK),  520 
Spherical  astronomy,  543,  549-552 
Spherical  coordinates,  9,  553 
Spherical  triangles,  542 
Spherical  trigonometry,  554 
Star  clusters 

globular,  511,526 

open,  511,522 
Starlight,  493 
Stars 

apparent  places,  23,  152-160,  510 
bright,  51 1-512 
double,  515-516 
foreshortening,  122 
mean  places,  51  1 
parallax,  121,  123,  398 
photometric  standards,  511,516 
proper  motion,  121 


INDEX 


751 


Stars  (continued) 

radial  velocity  standards,  51 1,  518 

secular  variations,  121 

spectral  classification,  519 
MK  spectral  standards,  511,  520 
Morgan-Keenan  system  (MK),  520 

stellar  positions,  184 

stratosphere,  141 

variable,  5 1 1 
Stationary  points,  479 
Statistics,  566-568 
Stellar  data,  509 
Stellar  positions,  184 
Sub-Earth  point.  391-395 
Subsolar  point,  392-395 
Subtabulation,  546 
Sun,  700 

eclipses  (see  Eclipses,  solar) 

ephemeris,  basis  of,  317 

low  precision  ephemeris,  484 

mass,  697 

physical  ephemeris,  397-398 
rise  and  set,  483-485 
rotation  elements,  705 
Sundials,  73 

Sunrise  and  Sunset,  32,  483-485 
Surface  brightness,  390 
Surface  brightness,  planets,  390 
Synodic  periods,  480-48 1 
System  III  longitudes,  Jupiter,  403 


T 

TAI  (International  Atomic  Time),  2,  39,  84 
Telesto  (Saturn  XIII),  410 
Television  transmissions,  67 
Terminator,  geometric,  397 
Terrestrial  coordinates,  13,  20,  126 
Terrestrial  Dynamical  Time  (TDT),  2,  42,  54 
Terrestrial  reference  system,  199,  200, 

217-218 
Terrestrial  Time  (TT),  3,  45 
Tethys  (Satum  III) 

orbital  elements,  356,  708 

physical  and  photometric  data,  410,  710 
Thalassa  (Neptune  IV),  709.  7 1 1 
Thebe  (Jupiter  XIV),  708,  710 

orbital  elements,  351 


Tidal  friction,  19 

Time  (see  specific  names) 

equation  of,  5,  55,  74,  485 

signals,  65 

transfer,  64 

zones,  56-57 
Titan  (Saturn  VI) 

orbital  elements,  360,  708 

physical  and  photometric  data,  4 1 0,  7 1 0 
Titania  (Uranus  III) 

orbital  elements.  369,  709 

physical  and  photometric  data,  412.  71 1 

topopause.  141 

troposphere,  295 
Topocentric  coordinates,  10,  160-165 
Topocentric  parallax,  Moon,  400 
Transformations  to  FK5,  167-187 

matrix  method,  180 
Transit  across  Sun's  disk,  47 1 

planets,  471 
Transit  circle  data,  290-294 
Transit,  ephemeris,  309 
Transits,  34 

Trigonometric  functions,  544 
Triton  (Neptune  I) 

orbital  elements,  373 

physical  and  photometric  data,  413 

troposphere,  141 
Tropical  year,  length,  80 
Twilight,  33,  482,  492 

astronomical,  33,  483,  492 

civil,  33, 483, 492 

nautical,  33,483,492 


u 

UBVRI  photometric  standards,  511,517 
Umbriel  (Uranus  II) 

orbital  elements,  369,  709 

physical  and  photometric  data,  412,  71 1 
Unit,  astronomical,  27 
Units 

International  System,  718-719 
length,  716 
mass,  7 16 
speed, 716 
Universal  Polar  Stereographic,  210-214 


752 


Universal  Time  (UT),  3,  39,  50-54,  76-77 

relation  to  sidereal  time,  5 1-52 

tidal  effects,  250-254 
Universal  Time  Coordinated  (UTC),  6,  53,  76, 
85-86 

Universal  Transverse  Mercator,  210-214 
Uranus 
mass,  697 

orbital  elements,  316,  368,  704 
physical  and  photometric  data.  706 
physical  ephemeris,  405 
rings,  368.  712 
rotation  elements,  405,  705 
satellites,  41 1—413,  709,  711 
semidiameter,  405 
uvby  and  H/.3  photometric  standards,  511,  517 


X-ray  sources,  511,  533 
catalogs,  533 


Year,  576,  698 
lengths,  576,  698 
lunar,  577 
sidereal,  698 
tropical,  80,  576 


Zodiacal  light,  493 
Zonal  tide  terms,  252-253 


V 


Variable  stars,  511,513 

American  Association  of  Variable  Star 

Observers  (AAVSO),  513-514 
General  Catalog  of  Variable  Stars  (GC  VSJ, 
513 

Name  Lists  of  Variable  Stars,  5 1 4 
Venus 

brilliancy,  402,  479 
magnitude,  402 
mass,  697 

orbital  elements,  316,  704 
physical  and  photometric  data,  402^103, 
706 

physical  ephemeris,  402^-03 

rotation  elements,  402,  705 

semidiameter,  402 

transit  of,  471 
Very  Long  Baseline  Interferometry  (VLBI), 

69, 255-256 
Vesta,  697 
Virtual  place,  165 


w 

Week,  577,  603 
WWV,  86 


»EX